Instructions:

Fold white cardstock to 6 x 5" with fold on the top then use the Decorative frame outline die from the Royal Elegance Frames to cut, leaving the top of the die over-hanging fold by about 1". Cut out a light green frame with the same die from the Seasonal Wreath Paper Collection and a light green frame with Large decorative oval die from the same paper collection. Using Decorative frame die cut out a white frame. Adhere all frames to the base using adhesive tape. Cut out the sentiment from the Seasonal Wreath Paper Collection.

Stamp 10 flowers from Rustic Sunflower Cling Stamp Set in Coastal Coral ink onto Deluxe Flower Shaping Paper, color them with the same ink, diecut with coordinating dies, shape with the shaping tool. Add some Pastel Pearl Stamens to their centers. Stamp 6 lilacs in Buttercup ink and cut out with coordinating die. Shape them with the shaping tool and add to their centers some Lettuce Entertain You prills.

Stamp 9 leaves from the Summer Wreath Accents Cling Stamp Set in Fern Green ink, color them with Leaf Green ink, cut out with coordinating die and shape with the shaping tool. Stamp 4 bees and the nest from the same cling stamp set in Tuxedo Black ink. Color them with promarkers and cut out with coordinating die. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers and bees.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, promarkers, sisal

Instructions:

Ready card size is 9 inches by 6 inches. Cut panel from Deluxe Flower Shaping Paper measuring 8 7/8 by 5 7/8" adhere it on card base using dimensional tape. Trim pattern paper from Seasonal Wreath Paper Collection and adhere on to the card base using clear glue.

Die cut Elaborate Oval Frame Die on Deluxe Flower Shaping Paper and Pattern Paper and adhere both together using clear glue. Die cut shadow die from Elaborate Oral Frame on Deluxe Paper. Adhere frame on shadow die cut using clear glue, and add this frame on the card base using dimensional tape.

Die Cut Ornate Ovals Die on Deluxe Paper and pattern paper from Seasonal Wreath Paper Collection and adhere both together, add this frame on the front of the card using foam dots. Add rhinestones on the frame as shown using clear glue.

For the wreath accents and flowers stamp all images using Versamark embossing ink from Summer Wreath Accents Die, Winter Wreath Accents Die, Autumn Wreath Accents Die and Clematis Cling Stamp set on Vellum paper cover with white embossing ink heat it with heating tool and die cut using coordinating die color the wreath accents with pink peony ink and leafy green ink from the back side using daubers, color the flowers using Tiger Lily Archival Ink from the back side using daubers, shape the flowers using shaping kit and make a few flowers, add clear glue in the center of the flowers and sprinkle mini prills.

Cover all elements with clear glue using hydra sponge and sprinkle some Nida Tanweer Magic Glitter. Arrange all ready elements as shown using hot glue gun and add lace.

Stamp the sentiment from Special Birthday Sentiment Stamp Set using Leaf Green Ink and add tag as shown using foam dots.

Other Products: Rhinestones, Nida Tanweer Magic Glitter Powder, Lace, Hot Glue Gun, Vellum Paper, White Embossing Powder, Versamark Embossing Ink, Dimensional Tape.

Instructions:

I used Deluxe Flower Shaping Paper to make my card base along with the Royal Gateway die. Cut a piece of Sheet 10B of the paper collection to cover the front of the shaped card. Using the inner piece of the Royal Gateway die cut one piece using Luxe Gold cardstock and one piece using white cardstock. Stagger the two pieces so the gold shows through behind the white piece and glue together. Adhere to the card front.

Using Luxe Gold cardstock, cut the inner piece of the Seasonal Wreath die and glue to the front of the gate. Using Rich Cocoa ink, stamp the pieces of the Winter Wreath stamps onto a piece of the Deluxe Flower Shaping Paper and use the coordinating dies to die cut the pieces. I stamped the holy leaves with Fern Green ink and colored with Leaf Green ink. I accented the holy with Olive ink. Use the coordinating dies to cut out the pieces. I colored the berries and fruit with Rhubarb Stalk and the pine cones were colored with Toffee Crunch and Rich Cocoa. All the ink was applied using the Stack and Store Daubers. I used the Deluxe Flower Shaping kit to shape the different elements and then I used hot glue to adhere to the top of the gold wreath. I sponged the elements with dries clear adhesive and sprinkled with glitter.

Cut a length of white seam binding and color using Rhubarb Stalk ink. This is done by balling the seam binding and spraying with water to saturate. Then smush ink onto a work surface and swirl the wet seam binding through the ink and then leave to dry. Tie a double bow and use Scor-Tape and hot glue to adhere to the top of the wreath.

Happy Holidays!

Other Products: White Cardstock, Die Cut Machine, Hot Glue Gun, Scor-Tape, White Seam Binding

Instructions:

Make a card base that measures 6” by 6”. Cut a piece of dark green background paper a little smaller than the card front from the paper collection and adhere on the card front.

Cut 9 square pieces measuring 1 1/8” by 1 1/8” from light green pattern paper from the paper collection. Distress the edges of each square with the help of sharp end of the scissors. Adhere these squares on the card front using foam dots.

Using the Rounded Window Frame Die, cut from Luxe Gold card stock. Using the Eyelet Circle Dies, cut two frames from white card stock. Adhere the rounded window die on the card front. Add the circle frame die cut on top.

Cut one piece seasonal wreath die cut in Luxe gold card stock and cut two pieces from the Green background paper from the paper collection. Overlay the green die cuts on the gold die cut using foam tape.

Stamp the foliage in Library green ink on deluxe flower shaping paper and color them using the Leaf Green ink and Library green ink using sponge dauber. Cut with matching die and shape the leaves using Deluxe flower shaping kit.

Stamp the birds, bees, fruits etc in jet black ink on Deluxe flower shaping paper and color with Zig Real brush pens and cut with matching die.

Stamp the small wild rose flowers in magenta hue ink on Deluxe flower shaping paper from the small wild rose die set. Stamp the smallest flower in Rose madder ink. Color the flowers using Archival inks and shape them in flower shaping mold for wild rose. Add white stamens in the center.

Cut a bow from the Seasonal wreath die in Luxe gold and red cardstock. Layer them together to form a single piece.

Arrange the foliage, the flowers and all the other elements on the wreath. Add the wreath on the card front using hot glue. Add the bow and on top of the card.

Cut the sentiment from the paper collection and add to the wreath to finish the card.

Other Products: Die cutting machine. scoring board, hot glue gun, hot glue sticks

Instructions:

Make a card base that has a single gate fold. Cut white card stock measuring 7" by 7". Score at 2 inch mark on one side and fold to make a single gatefold card.

Cut pattern paper from the Seasonal Wreath paper collection to cover the front gate panel, the inside part and the base of the card on inside.

Cut a die cut from the Eyelet Royal die using Luxe Gold card stock. Cut in two parts and use only the swirly decorative part of the die cut. Adhere this die cut on the edge of the gate panel.

Cut one piece seasonal wreath die cut in Luxe gold card stock and cut two pieces from the Green background paper from the paper collection. Overlay the green die cuts on the gold die cut using foam tape.

Stamp the foliage in Library green ink on deluxe flower shaping paper and color them using the Leaf Green ink and Library green ink using sponge dauber. Cut with matching dies and shape the leaves in Deluxe flower shaping kit.

Stamp the bells, decorations etc. in jet black ink on Deluxe flower shaping paper and color with Zig Real brush pens and cut with matching dies.

Stamp the Poinsettia flowers in carnation ink on Deluxe flower shaping paper from the Small Festive Poinsettia cling stamp. Stamp four small flowers and color with carnation ink and cut with coordinating die. Then shape the flowers in the 3D festive poinsettia mold. Layer two flowers together to form one flower and add prills in the centre.

Cut a bow from the Seasonal wreath die in Luxe gold and red cardstock. Layer them together to form a single piece.

Arrange the foliage, the Christmas elements and the flowers on the wreath. Add the wreath on the side gate.

Add the bow and on top add a gold cord. Cut the sentiment from the paper collection and add to the wreath to finish the card.

Other Products: White card stock, glitter powder, die cutting machine, scoring board, hot glue gun, hot glue sticks, red card stock, gold cord.

Instructions:

Create a card base with white cardstock and the Lattice Flourish Gateway Die, cut another front in green designer paper from the Seasonal Wreath Paper Collection and adhere. Cut the decorative dies from the same set in white and Luxe Gold cardstock and adhere together off set. Cut a piece of pale green designer paper with the outer gate die (cut free from upper die) and adhere to gate and adhere to card front with foam tape, as shown.

Cut out the detail wreath with the Seasonal Wreath Die in dark green paper from the paper collection and the wreath frame in Luxe Gold cardstock and adhere them with foam tape. Adhere to the center of the card.

Stamp the berries, rose hips, holly and branches from the Winter Wreath Accents Cling Stamp Set in Jet Black on Bristol Smooth paper, color with Zig markers and cut out with coordinating dies. Sculpt with Deluxe Flower Shaping Kit.

Stamp the sentiment from the Festive Winterscapes Cling Stamp Set in Jet Black and cut out with the Arrows and Banner Die.

Cut out the bow from the Seasonal Wreath Die in red cardstock, cut out the detail bow in the same paper and distress with Carnation Red, adhere together.

Adhere the wreath to the top of the gate and arrange the berries, rosehips, branches, sentiment and bow as seen in photo.

Stamp the Large and Small Festive Poinsettia Cling Stamp Set in Carnation Red, cut out with coordinating dies and sponge with same, sculpt with the Large and Small 3D Festive Poinsettia Shaping Molds, stamp the stamens in Vivid Chartreuse, sponge with same, cut out with coordinating dies, adhere to flower centers and glitter.

Arrange and adhere poinsettias and foliage along bottom of gate as pictured.

Other Products: White cardstock, Bristol Smooth Cardstock

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 12” x 6”, score at 6” along the long side and fold to create a base card of 6” x 6”. Cut a piece of gold cardstock 6” x 6” and adhere to the front of the card. Cut a 6” x 6” panel from the pattern paper and trim to 5 7/8” x 5 7/8” and adhere to the front of the card. Die cut three outer decorative dies using the No. 2 die from the HCD1-7370 Simply Elegant Centerpiece Die – two from Deluxe Flower Shaping Paper and one from gold cardstock. Adhere the two white dies together and then add the gold die to the top of the white dies. Adhere to the front of the card. Die cut the inner decorative die using the No. die from the HCD1-7370 Simply Elegant Centerpiece Die and adhere to the centre of the decorative frame.

Die cut three wreaths using the No. 2 die from the HCD1-7375 Seasonal Wreath Die – two from dark green cardstock and one from medium green cardstock. Adhere together with the medium green wreath in the centre and slightly offset them. Adhere to the card as shown.

Stamp the berry, holly leaves, fir branches, pine cones, baubles and bells and rosehip images from the HCPC-3967 Winter Wreath Accents Cling Stamp Set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Real Brush Markers and colour pencils and die cut with the coordinating dies. Assemble the images around the bottom of the wreath as shown.

Stamp the small poinsettia images from the HCPC-3957 Large Festive Poinsettia Cling Stamp Set in Mulberry ink on Deluxe Flower Shaping Paper. Colour the centres with Sunflower ink and the petals with Vermillion ink and die cut with the coordinating dies. Colour the backs of the flowers with Vermillion ink and die cut with the coordinating molds. Assemble using two petals of each size and insert yellow bead stamens through the centres. To finish the flowers, add Crystal Clear glitter using clear gloss gel medium. Add the poinsettia to the bottom of the wreath over the coloured images as shown.

Die cut the outer bow die from the HCD1-7375 Seasonal Wreath Die out of gold cardstock. Die cut three inner bow dies from the HCD1-7375 Seasonal Wreath Die out of gold cardstock. Adhere one detailed bow die to the outer bow die and then add three layers of the inner die cuts to the bow. Adhere to the top of the wreath as shown.

Die cut the small snowflake images from the HCD1-7375 Seasonal Wreath Die out of gold cardstock and adhere snowflakes on the card background and also nestle among the images at the base of the wreath. Add iridescent gems to the centre of the snowflakes on the background.

Colour small clear sparkles with alcohol markers in red, green, yellow and blue and adhere to the wreath. Add Red Berry Nuvo drops to the berry branches. To finish, add Crystal Clear glitter to the images with clear gloss gel.

Other Products: Iris Cardstock, Prismacolour pencils, iridescent gems, small clear sparkles, clear gloss gel medium, Copic Markers – red, blue, yellow and green, Spellbinders - Fern Colour Essentials cardstock, Rainforest Colour Essentials cardstock

Instructions:

Make the card base by using the outer die from the Elegant Swirl Gateway die set and the white card stock. Die cut twice, then with the  score-pal, make a 1 / 2 “ score line across the top of one of the card bases. Apply double sided tape to above the fold then adhere both card bases together. Using the Viridian ink and a dauber ink the edges of the card front.

Taking a green based design paper from the paper collection and the large lace die frame from the Elegant Swirl Gateway set, die cut the lace frame. Adhere this to the card base. With the next frame in from the die set and the white card stock, cut four of these frames. Adhere them together then apply clear drying adhesive using a hydra sponge to the top layer, sprinkle glitter over the adhesive. When dry tap away the excess glitter then adhere to the card front.

Die cut from the white card stock the background wreath, ink this with the viridian ink with the aid of a dauber. Adhere this to the card base with 3D foam dots. This will be the base for all the elements.

To make all the elements for this card use the library green ink for the stamping onto the white card stock. Colors used for the stamped elements are: The set of owls, bison, straw and persimmon pencils. The flowers, sunflower, cherry and mango pencils. The grapes and leaves, iris, pesto green and cherry pencils. Die cut the stamped images with the matching die sets then bring shape to them by using the flower shaping tools. Die cut the bow and apply clear drying adhesive to it with the aid of a hydra sponge then sprinkle glitter onto it. Make a sentiment banner by stamping the sentiment with library green ink onto white card stock then cut the ends as seen in the photo. Ink the edges with the Viridian ink.

Adhere all the elements to the wreath base, clustering as shown using the hot glue gun and the clear drying adhesive. Cut the sentiment banner in half and adhere one half on each side of the wreath. Apply the crystal lacquer to the owls eyes and the flowers. Sprinkle the prills onto the flower centres. 

Other Products: Inks used: spectrum Noir aqua pencils: Bison, Straw, Persimmon, Cherry, Mango, Pesto Green, Iris. Other: Paper trimmer, Hot glue gun, Double sided tape, Double sided 3D foam tape.

Instructions:

Other Products: White Cardstock, Hot Glue, Dimensional Tape, Ranger Archival Ink Pad - Sea Grass

Instructions:

Completed card will measure 9 x 7". Cut white cardstock 11 3/4” x 5 1/2” and lay landscape onto scoreboard, score 2 1/4”, 3 3/4”, 8”, 9 1/2”. Line each panel on the front of the card with Sweet Magnolia Paper Collection 10B (cut panels slightly smaller when in a valley fold to allow for the card to collapse). Line the back with Sweet Magnolia Paper Collection 4A, cut to fit each panel and edge with Pink Peony. Cut Sweet Magnolia Paper Collection 10A slightly smaller mats to sit over the green paper on the front of the card, edge with Pink Peony. Add a decorative panel from the paper collection 1A. While the card is still flat stamp at the centre in Deep Purple ‘Just a Note’ from the Sweet Lilac Scroll & Notes Cling Stamp Set.

Stamp onto white cardstock in versafine sepia and clear heat emboss Sweet Magnolia Buds, Clematis Birdhouse & Trellis and Clematis Spray. Colour with Zig Clean Colour Real Brush Markers and watercolour brush and die-cut.

Die-cut in white cardstock Ornate Flourish Gateway Die, add self adhesive pearls and Clematis Spray. Add hot glue to the centres of the spray while wet add TuTu prills. Adhere the gateway to the front of the card ensuring the card will collapse flat both ways.

Adhere the trellis to either side of the front of the card on foam strips and tuck/adhere the Sweet Magnolia Buds.

Stamp Clematis Cling stamp onto Deluxe Flower Shaping Paper in Deep Purple and Vibrant Fuchsia, colour the centres in Viridian, die-cut  and edge each flower with the same colour. Stamp the leaves in Library Green, colour with Viridian, die-cut and edge the leaves with Library Green. Spritz and lay in the 3D Clematis Shaping Mold and run through the die-cutting machine. Hot glue two petals of the same size. Add hot glue and I Cannot Tell a Lilac to the pink flowers and hot glue and Tu Tu prills to the purple flowers. The larger flowers have the opposite colour Assorted Pearl Stamens Small through the centres, poke a hole through, thread the stamens, secure with hot glue at the back of the flower and trim off excess.

Hot glue the flowers onto the trellis. Add Dries clear with a brush to the petals and add Crystal Clear glitter.

Other Products: Hot glue, paper trimmer/scissors, pearl strips, versafine sepia, clear heat embossing powder

Instructions:

The 6 x 6" card base is white cardstock. Cut the light purple patterned paper to 5.75x5.75 and adhere to the card front adding white photo corners. Add mini pearls to the photo corners.

Die cut out the Simply Elegant Centerpiece from white cardstock. Cut the middle scalloped circle from white cardstock, the next smaller plain circle from light green patterned paper, and a smaller plain circle from white cardstock. Die cut out the Happy Birthday sentiment from purple cardstock. Adhere the large die cut piece to the card front. Add the scalloped circle using foam tape. Adhere the remaining layers together, and then add to the card front using foam tape.

Stamp and die cut 1 of each the clematis bough and the birdhouse using brown ink (Staz On Timber Brown) onto white cardstock. Add color to these images using ink and a waterbrush for the flowers (Stampin Up- Berry Burst) and Zig Clean Color Markers (Leaves- Olive and Birdhouse- Oatmeal) and a waterbrush for the rest.

Shape the images slightly using the Deluxe Flower Shaping Kit. Add pink Prills to the middle of each of the flowers using a liquid adhesive. Let dry completely. Add the bough to the top of the card using foam squares and add the birdhouse to the bottom right hand corner of the layout, also using foam squares.

Other Products: Cardstock (White, Purple), Stampin Up Ink- Berry Burst, Waterbrush, Pearls, Scrapbook Adhesives by 3L (Creative Photo Corners White, Dual Tip Glue Pen, 3D Foam Squares, E-Z Runner Ultra, Adhesive Dots Mini)

Instructions:

Cut out the white base of the card and fold it to 6 1/4" x 6 1/4". From the paper collection, cut a 6” x 6" square and glue to the base. From the paper collection, cut a larger frame from the Simply Elegant Centerpiece Set and glue it to the card. Then cut a smaller frame on white paper and glue it on.

From the paper collection, cut a smaller frame from the Elegant Hearts Centerpiece Die set and glue it to the card. From the same set, cut a smaller frame out of white paper and glue it.

Stamp the small elements from the Autum Wreath Accents and Winter Wreath Accents sets with black ink on white paper.Cut with matching dies. Smudge  red, green, brown, purple ink. Shape it up with the Deluxe Flower Shaping Kit.

To make the flowers, stamp the sunflowers from the Autumn Wreath Accents set with black ink on white paper, then color them with yellow ink and cut out with  coordinating dies. mold with the Deluxe Flower Shaping Kit. Add glue and brown Prills to the center of the sunflowers

Cut a sentiment from the collection of paper and adhere as shown.

Arrange everything as shown in the photo. Cover with glue and glitter.

Other Products: die cuting machine, Distress ink -dusty concord-

Instructions:

The finished card measures 5 x 8". Take a 10 x 8" white base and fold it in half to make a side fold card. Cut a 4 1/2 x 7 1/2" violet paper and a 4 x 7" stiped paper.  Distress the edges with a special tool or the blade of a scissors. Glue those pieces on the card base.

Stamp and color your 11 Flowering Dogwood Flowers from different sizes with Stazon teal blue onto deluxe flower shaping paper. Diecut with the coordinating die. Color the center and shade the edge with stazon rose fuchsia. Give further shape with Deluxe flower shaping kit tools. Poke a hole in the centre of the flowers and add white stamens, secure with hot glue. Use 2 petals for flowers.

Stamp in black and cut a bird from Floral song and color it with rose fuchsia and teal blue ink. Also stamp and cut in olive element from Floral shoppe fillers and large floral urn. Color the flower with yellow zig marker.

Put cheesecloth on 2 opposite corners and glue your flowers, leaves and bird over it. Add fill from the Floral shoppe collection through your bouquet. 

Die cut a sentiment from the paper and glue it over a 2 3/4  x 1" violet piece of paper and a 2 7/8 x 1 1/4 " white cardstock. Glue it in the center of the card with 3D foam.

Other Products: Die cutting machine Cut’n’boss, heatgun, water mister, hot glue gun, hot glue, scissors, cheesecloth,

Instructions:

The finished card measure 6 x 6 inches. Cut one piece of white cardstock in deluxe flower shaping paper 12 by 12 inches and score at 6 inches to make a side fold card. Cut a 6 x 6 green paper with the Simple Centerpiece die and glue it on your card base. 

Use the biggest part of the Elegant Hearts Centerpiece die and cut it 5 times in white. Overlap to create a three-dimensional outline. Glue on the base. For the center cut 3 pieces with the Simple Centerpieces: 3 inch octagon in violet, 2 1/2  inch octagon in pattern paper and 2 inch octagon in green paper (Stamp a sentiment and ink the edge of this one with deep purple ink).  Glue it on each other in the middle of your card with 3D foam.

Make 6 Climbing Clematis Flowers of different sizes. Stamp with Deep purple ink onto Deluxe flower shaping paper, color the center with the same color ink and shade the edge with the same color sea grass ink. (You can also color the back of the flowers). Diecut with the coordinating die. Place face down into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe flower shaping kit tools. Glue 2 layers together. Poke a hole in the center of the flower and add stamens. Put a little bit of glue on the tips of you petal and dip them in the crystal clear powder to make them shine. Also make 7 leaves in leaf green with the same technique.

Put cheesecloth and sewing thread on each side of your sentiment. Glue 3 flowers and leaves on each side. 

Other Products: Water mister, hot glue gun, hot glue, scissors, cheesecloth, die cutting machine, sewing thread, Sea grass archival ink

Instructions:

Card size 5” x 7”. Take pattern paper from the Seasonal Wreath Collection HCDP1-2132, tear the edges and adhere it on the card base using Designer Dries Clear Adhesive.

Cut one base die from Simply Elegant Centerpiece Die HCD1-7370 on pattern paper and intricate die on white cardstock and adhere this intricate die on the base die cut. Cut it in half add crystal clear glitter. Adhere them on the left and right edges of the card as shown. Cut one die from Simple Centerpiece Die HCD1-7367 on pattern paper from the collection and adhere it at the center of the card using foam tape.

Cut one intricate die from Simply Elegant Centerpiece Die HCD1-7370 on white cardstock, adhere it at center of card, as shown.

Cut one wreath die from Seasonal Wreath Die HCD1-7375 on gold cardstock and adhere it using Designer Dries Clear Adhesive.

Cut one ribbon die from Seasonal Wreath Die HCD1-7375 on white and gold cardstock.

Add sentiment at the center of Gold Wreath from Just For You Sentiments Cling Stamp Set HCPC-3845 using archival ink-library green.

Stamp images from Winter Wreath Accents Cling Stamp Set HCPC-3967 on white cardstock using archival ink-plum and cut them using coordinating die Winter Wreath Accents Die HCD1-7374 and color them using archival ink-cactus flower, sunflower, forget-me-not, coffee, as seen on picture. Stamp fern leaf image on Vellum using white ink and sprinkle white embossing powder, heat it, cut it with coordinating die and shape them using ball tool. Take poinsettia leaf stamp apply distress ink-peeled paint and aged mahogany ink and stamp it on white cardstock and sprinkle water, let it dry and on top of it stamp again using archival ink-library green, and cut it with coordinating die. This gives a very nice look.

Once all these embellishments are ready assemble them aspictured.

Other Products: White cardstock, Big-Shot Machine, Distress ink-Peeled Paint, Aged Mahogany

Instructions:

Use one of the White 5 x 7" Gateway Fold Cards, glue the back 2 panels together making it a regular 5 x 7" card base.

Use the Tear Drop Lattice Gateway largest die and cut a piece out of the Seasonal Wreath Paper (10B) and adhere to the front of the card base. Use the next size die in the set and cut out sheet 2B, glitter the outside and set aside to dry.

Use the Seasonal Wreath die and the same 10B paper and cut it out. Place the 4th die from the Small Circle Set in the center to complete making the wreath. Add foam dots to the back and adhere to the center of the card. Use the 5th circle die and cut the same 2B paper, stamp the sentiment on the center with Coffee ink, ink around the edge with the coffee ink, add foam dots to the back and adhere to the center of the wreath.

Stamp the owls, leaves and acorns on white with the Coffee ink, color with the Zig Makers, cut out with the coordinating die.

Stamp flowers from the Rustic Sunflower Cling Stamp set on white card stock with Tangelo ink, color with Dandelion, cut out with the coordinating die, ink the edges with Cantaloupe ink. Place the flowers in the matching mold and run through the die cut machine to shape. Put 2 together making one flower. Make 3 flowers.

Die cut the 2nd die to make the bow from sheet 2B, cut the bow out of white card stock and adhere the 2 together. Use Hot glue and adhere everything to the card.

To finish, add glitter and Gold Gala Glitz to the center of the flowers.

Other Products: Die cut machine, Paper trimmer, Hot glue gun, Gold Gala Glitz, Memento Dandelion ink,

Instructions:

Cut a 4 1/4" x 5 1/2" piece of pattern paper from Seasonal Wreath Paper collection and adhere it on a same sized card base. Emboss a 4 1/4" x 5 1/2" piece of vellum using Cuttlebug Anna Griffin Juliet Damask Embossing Folder and adhere it on the card front. 

Die cut a circlular frame from Luxe Gold Cardstock using the dies from Eyelet Circle and Basics Small die and Circle and Basics Large die. Adhere it on the card front. Cut a thin strip of gold cardstock and adhere it on the top edge to 'hang' the circle. 

Stamp the leaves from Summer Wreath Accents Cling Stamp Set on Deluxe Flower Shaping Paper using Olive Archival ink. Stamp the images from Autumn Wreath Accents Cling Stamp Seton Deluxe Flower Shaping Paper using Coffee Archival ink. Color the images with watercolors. Die cut all the images using the matching dies from Summer Wreath Accents Die and Autumn Wreath Accents Die. Shape them using Deluxe Flower Shaping kit.

Stamp the flowers and leaf from Rustic Sunflower cling stamp set on Deluxe Flower Shaping Paper using Monarch Orange and Olive Archival inks. Color the flowers using Sunflower and Monarch Orange Archival inks and the leaf with Sunflower and Leaf Green Archival inks. Die cut them using the matching dies from Rustic Sunflower Die. Shape them using 3D Rustic Sunflower Shaping mold and Deluxe Flower Shaping Kit. Mix Express-O Yourself, Third Place and Glit Trip prills and use as flower centers.

Arrange and adhere all the flowers, leaves and other elements as shown on the card. Die cut a piece of pattern paper from the same paper collection and Luxe gold cardstock using the bow die from Seasonal Wreath Die. Layer them together and adhere it on top of the werath as shown. Adhere few ladybugs made with Ebony Black and Red Berry Nuvo Crystal Drops to the flower arrangement to add finishing touch.

Other Products: Altenew Watercolors, Red Berry Nuvo Drops, Get Inspired Vellum and Cuttlebug Anna Griffin Juliet Damask Embossing Folders

Instructions:

Card size: 4 3/4 x 6 3/4". Make a shaped card with the Decorative Circle Frames outer die (see video) on a folded 5 x 7" heavy weight card by hanging the die over the top of the fold by about 1/4". Cut another front from ivory and 2 from light gold colored decorative paper with the same die. Glue ivory on card front then 1 of the light gold decorative paper die cuts. Glue the other decorative paper die cut inside card, trim as needed. Cut the rust frame by using the large decorative part of the die with the large outer die together. Cut just the decorative die from gold color. Cut a light gold decorative paper large circle. Glue the rust frame onto front of card then pop-up gold color decorative die cut. Glue the decorative paper circle in the center.

For the Wreath: Die cut outer and inner Seasonal Wreath from, gold color cardstock, stamp, die cut and color the apples, sunflowers, single owl, leaves, acorns, grapes, wheat stocks several times each (except owl) using Tuxedo Black. Stamp Rustic Sunflowers (smallest only) using Peanut Brittle then sponge with Sunflower, die cut then shape in the mold. Glue 2 together for each flower (5 flowers total) then fill centers with Redland Elements. Glitter the flowers, lacquer the leaves, apples and grapes.

Arrange leaves, acorns, grapes, apples, wheat stocks and sunflowers around wreath leaving space for the bow at the top. Circle ribbon all the way around wreath front to back to front until you get back to the top. Attach both ends under the wreath base then glue a bow at the top. Attach foam strips all the way around wreath in the back then attach wreath to the card center. Add the wise owl with glue and foam dots or strips to the bottom of wreath.

Finish by adding some copper Nuvo drops here and there on the wreath and glitter the card base.

Other Products: White cardstock, gold color cardstock, rust cardstock, ribbon, foam sheet, Copic Markers: Y11, Y15, Y19, Y38, Y21, YR24, YR04, E31, E33, E35, E37, E43, E44, E11, E15, E51, E21, R43, R24, R29, R39, YG03, YG17, YG61, G82

Instructions:

Cover a 6 x 6” tent fold card base with Rustic Sunflower Paper Collection sheet 9A and edge with Night Sky.

Line the inside of the card with Rustic Sunflower sheet 1B edged with Night Sky. Die-cut Elegant Hearts Centerpiece in white cardstock and adhere. Mat and layer Simple Centerpiece white cardstock and Rustic Sunflowers sheet 12B, stamp/edge in Night Sky ‘I’m thinking of you’ from the For My Friend Sentiments Cling Stamp Set.

Die-cut in white cardstock Regal Lattice Gateway and adhere to the front of the card. Die-cut Album Tags and Accents and mat and layer Rustic Sunflower 6A onto 12B edged with Night Sky. Die-cut a Decorative Eyelet Accent aperture into the tag and adhere the eyelet frame around in sheet 12B. Die-cut Album Tag mat in Rustic Sunflower 4A adhere to the card front and adhere the aperture tag over on dots. Die-cut Oranamental tag from Rustic Sunflower sheet 12A, edge and stamp in Night Sky ‘Praying for you’ from Sweet Lilac Scroll & Notes Cling Stamp Set, adhere with a dot and hot glue a blue twine bow.

Stamp onto white cardstock with versafine onyx lady bugs from Rustic Sunflower Bucket, Small Garden Zinnia and small butterfly from Large Floral Butterfly Cling Stamp Sets, clear heat emboss while the ink is wet.

Colour the lady bugs with Zig Clean Colour Real Brush Markers and sharpie black pen and die-cut. Add 3D lacquer to the Zinnia lady bugs. Shape the black lady bugs with Deluxe Flower Shaping Kit. Colour the butterfly with gel pens.

Stamp onto white cardstock in Sepia versafine and clear heat emboss sunflowers from Rustic Sunflower Bucket Die and sunflowers from Rustic Sunflower Can & Freezer, colour with watered down Distress Ink Lucky Clover, Mowed Lawn, Vintage Photo, Mustard Seed, Squeezed Lemonade with a watercolor brush, die-cut and shape with Deluxe Flower Shaping Kit.

Stamp onto white cardstock in Sepia versafine cardstock Rustic Sunflower Can and colour with Zig Clean Colour Real Brush Markers and watercolor brush, die-cut and shape with fingers or tool kit.

Stamp onto Deluxe Flower Shaping Paper the Rustic Sunflowers in Sepia, colour with Buttercup and edge in Sepia. Stamp again in Monarch Orange and colour with Sunflower, edge with Monarch Orange.

Stamp onto Deluxe Flower Shaping Paper in Fern Green the Rustic Sunflower leaves and colour with Vivid Chartreuse, edged in Leaf Green.

Spritz petals and leaves with water and add to 3D Rustic Sunflower Shaping Mold. Use hot glue to adhere two petals of the same size together. Add hot glue to the centres of the sunflowers, add prills Power Outage and Gilt Trip.

Use hot glue and dots to adhere die-cuts around the aperture tag. Add dries clear and crystal clear glitter to petals and leaves.

Other Products: Hot glue, paper trimmer/scissors, gel pens, sharpie black, twine, versafine onyx/sepia, clear heat embossing powder

Instructions:

Teepee card measures 4” x 4” x 5 3/4”. To create a card base - cut out three 4” x 4” squares of HCPP1-438-1 Paper Pack of 10 - Black, then score tham diagonally using a bone folder and ruler. Cut out two 3 3/4” x 3 3/4” squares from HCDP1-2131 Rustic Sunflower Paper Collection, then cut them diagonally and adhere each of the triangles to the black card square cut previously. Adhere all the squares together. Diecut the Swirly Border Accents from Luxe Gold Cardstock. Cut out two squares from HCDP1-2131 Rustic Sunflower Paper Collection, cut them diagonally and adhere the gold swirls on the top of each triangle, then adhere the final pieces to the card base.

Die cut tag from HCDP1-2131 Rustic Sunflower Paper Collection with HCD1-7203 Ornamental Tags Die, stamp the sentiment fromHCPC-3901 Fresh Cut Hydrangea Cling Stamp Set on it with Memento Dye Ink Pad - Paris Dusk, then adhere the final piece to the card base using 3D foam.

Stamp the sunflowers on HCPP1-468 Deluxe Flower Shaping Paper Pack of 25 - White with HCPC-3964 Rustic Sunflower Bucket Cling Stamp Set with Memento Dye Ink Pad - Rich Cocoa and colour it with memento Dye Ink Pads: Dandelion, Bamboo Leaves and Potter’s Clay using HCDA1-449 Daubers. Die cut the flowers with matching HCD1-7366 Rustic Sunflower Bucket Die, then shape them with HCST1-401 Deluxe Flower Shaping Kit and apply black glitter into the flower centres as shown.

Using a sponge add Designer Dries Clear Adhesive to the leaves and flowers, sprinkle them with Glitter, then adhere flowers and leaves to the card as shown.

Other Products: Die Cutting machine, Trimmer or Guillotine, Scissors, Hot glue Gun, ruler, Bone folder, glitter, black glitter, memento Dye Ink Pad - Dandelion

Instructions:

 Use kraft paper to make a 4.25" x 6" base when folded. Round the bottom corners. From the sheet 11B of the Rustic Sunflowers Paper Collection, cut a 4" x 5.75 '' rectangle. Round off the bottom corners then glue to the base. In the center, glue horizontally a strip cut from the 1.5 '' x 4 '' 11A Home on the Farm Paper Collection plaid. From the remnants of the random watercolor background with orange and yellow blotches, cut a 3.5 '' x 5.25 '' rectangle and glue it to the base.

From sheet 1B Home on the Farm Paper Collection, cut out the decorative strip from the HCD1-7201 Ticket and Tags set, reduce it by trimming it in the middle so that it protrudes slightly beyond the edge of the work. Glue horizontally in the center on the watercolor background.

From the green sheet of 11B Home on the Farm Paper Collection, cut two strips across the entire length of the sheet and about 2" wide. Use the lace pattern from HCD1-7202 Album Tags and Accents Set. On the scoring device, draw vertical lines, then fold the strips into an accordion and glue both ends together. Pinch the middle part to form a rosette shape, adhere the bottom part with a piece of paper. Hold for a while so that the rosette does not fall apart and the glue grabs well.

Cut 2 circles from the HCD1-7155 Circle Basic Large Set (use the third 1.75 '' x 1.75 '' and the fourth 2.25 '' x 2.25 '' circle from the center). Use brown 12B Home on the Farm Paper Collection and 10B Festive Poinsettia Paper Collection. Attach the circles to the top of the rosette as shown.

On a white cardboard, stamp the images of pumpkins and leaves. Use Brown Distress Ink Pad- Gethered twings for pumpkins and Black Archival Ink Pad- Jet Black for leaves. Use the HCPC-3966 Autumn Wreath stamp set and the HCPC- 3941 Countryside Autumn 'scapes stamp set. Cut with matching dies. Paint with watercolor paints green and orange. Make a composition of leaves and pumpkins as shown. Glue on top f the rosette with round foam cubes.

And the autumn card with a rosette is ready!

Other Products: Cutting machine, paper tymmer, watercolor paint, brush, ruler, Distress Ink Pad- gethered twings, corner rounding device

Instructions:

Card size with wreath is 8 x 7”. Score and fold an 8 x 12” pearlescent black cardstock at 6” to create a tent fold card base. Cut pearlescent black cardstock 8 x 6” and adhere to the card front. Cut orange Tim Holtz Metallic Jewels cardstock to 7 7/8 x 5 7/8”, pearlescent black cardstock 7 5/8 x 5 5/8” and Rustic Sunflower 7 3/8 x 5 3/8” Ink the edges of the designer paper with Distress Oxide Black Soot Ink. Adhere the three together and then adhere to card front using dimensional tape. Cut orange metallic cardstock 7 3/4 x 5 3/4” and designer paper 7 1/2 x 5 1/2”, ink the designer paper and adhere the two pieces to the inside of the card. Cut an orange metallic strip 7 3/8 x 1” and adhere to the bottom of the inside.

Diecut the Palace Gateway from black cardstock, sponge with dries clear adhesive, cover with Martha Stewart onyx glitter and adhere to the center of the card front. Using the Letters and Numbers Die, cut the B 3x and the O 6x from black cardstock, adhere three together to create thicker letters, sponge with dries clear adhesive, cover with Martha Stewart onyx glitter and adhere to the right side of the card as shown.

Cut the Seasonal wreath 3x from black cardstock, adhere together and spray with Sheer Shimmer Craft Spray – Sparkle. Stamp the leaves, pumpkins and owl from the Autumn Wreath Accents Cling Stamp set on heavy white cardstock using Memento Tuxedo Black ink. Color the pumpkins and owl using Stampin’ Blends Markers – Pumpkin Pie, Soft Suede, Crumb Cake, Granny Apple Green and So Saffron and color the leaves using Archival Olive, Vivid Chartreuse and Tiger Lily inks. Diecut using the coordinating Dies and shape using the Deluxe Flower Shaping Kit. Sponge with dries clear adhesive and sprinkle with Nida Tanweer Magic Glitter Powder. 

Adhere the single owl, pumpkins and leaves to the wreath as shown using hot glue. Adhere the other owls to the inside of the card. Diecut the bow from orange and black Tim Holtz Metallic Jewels Cardstock, emboss the orange bow, adhere the black and orange together, lightly shape and adhere to the top of the wreath.

Other Products: Pearlescent Black Cardstock, White Cardstock, Tim Holtz Metallic Jewels Cardstock, Dimensional Tape, Martha Stewart Onyx Glitter, Sheer Shimmer Craft Spray – Sparkle, Hot Glue Gun, Embossing Folder from my stash, Diecutting Machine, Misti, Nida Tanweer Magic Glitter Powder, Stampin’ Blends Markers – Pumpkin Pie, Soft Suede, Crumb Cake and Granny Apple Green,