Instructions:

Make a card base from white card stock. Cut two pieces of white card stock 5” x 7” and 5” x 7 1/2". Score at 1/2" on the longer side on the bigger piece. Fold the flap. Attach the smaller piece on the flap and make a top folding vertical card base. Cut a mat layer 5 3/4" x 6 3/4" from pattern paper and adhere to the front panel of the card base. Add another mat layer from white card stock measuring 5 1/2" x 6 1/2". Add another mat layer 5 1/4" x 6 1/4" from pattern paper collection.

Stamp the images from the Large Mushroom Cottage stamp set, the Mini Mushroom Cottage stamp set and the Muschroom Accents stamp set in Jet black ink on Deluxe flower shaping paper. Colour the images with Zig real brush markers. Cut the images with matching dies and add glitter power using designer dries clear glue.

To make the poppy flowers, stamp the  small flower images from wild poppy stamp set with leaf green ink on deluxe flower shaping paper. Colour the flowers with a blend of Vibrant Fuschia and Leaf green ink using daubers. Shape the poppy flowers in the 3D flower shaping mold for poppy. Assemble the flowers together and add prills in the centre.

Make leaves by stamping the leaves from Leafy Accents stamp set on deluxe flower shaping paper using Leaf green ink. Colour with same colour using daubers and cut with matching die. Shape the leaves in the 3D Shaping mold for leafy accents.

Finish the card by adding a sentiment from For My Friend Sentiments stamp set. Add glitter powder to add sparkle to the card.

Other Products: Scoring board, Die cutting machine, hot glue gun

Instructions:

Cut a piece of white cardstock to 10 x 7”, score at 5”. Using the largest die from HCD2-7349 Palace Gateway Die cut through both layers of card stock with the top portion of the die hanging just over the fold of the paper to preserve the fold of the card. This will form a shaped card base. Using the same die, cut 1 from white cardstock, and 1 from sheet 4A from the HCDP1-2140 Mushroom Cottage Paper Collection. Adhere the white cardstock layer then the patterned paper layer to the card base to begin the card front design. From the same die set used above cut 1 white cardstock and 1 Luxe Silver Cardstock gates and glue these together just offsetting the silver one on top of the white one as shown. Using scissors, snip the gate open. Using Dries Clear Glue, adhere the gate to the card front without gluing the doors of the gate down.

Stamp 4x vines from HCPC-3989 Large Mushroom Cottage Cling Stamp Set in Emerald Green and x4 of the small poppy flower stamp from HCPC-3986 Wild Poppy Cling Stamp Set in Vibrant Fuchsia onto white cardstock and die cut these with the coordinating dies. Using Stack and Store Daubers color the Poppy flowers using both Pink Peony and Vibrant Fuchsia and the vines using both the Vivid Chartreuse and Emerald Green. Shape as desired with the Deluxe Flower Shaping Kit. Using Dries Clear glue and a Hydra Sponge, add Rajni Chawla’s Crystal Clear to both vines and flowers then finish off the flowers by adding the Prills to the centers.

Stamp the following items onto Copic paper in Tuxedo Black ink. The right facing fairy 1x, from the HCPC-3991 Mushroom Fairies Cling Stamp Set, The mini mushrooms 1x, and the lightning bug 2x, from the HCPC-3992 Mushroom Accents Cling Stamps Set, and lastly 1x mushroom that will fit behind the right door of the gate from HCPC-3990 Mini Mushroom Cottages Cling Stamp Set. Color all of these images using Copic markers. Die cut using coordinating dies. Add Crystal Ultrafine Transparent Glitter to the fairies wings with Dries Clear glue and add 3 small dots to her cheeks with a white gel pen. Also add white dots to the tops of the mini mushrooms. Add Stickles to the lightning bugs. Allow everything to dry.

Glue the mini mushroom cottage behind the gate door on the right side using Dries Clear glue. Arrange all vines, the fairy, and flowers and attach with a glue gun using the photo as a guide. With dimensional adhesive ,finish the scene adding lightning bugs and mini mushrooms. Decorate inside of card as desired.

Other Products: Stickles, Copic Markers, Copic X Press It Paper, White Gel Pen, Dimensional Adhesive, Glue Sticks, Hot Glue Gun, Scissors, Die Cut Machine.

Instructions:

My finished card size is 3 1/4" x 6 1/4" which is the mini slimline card size. Make card base using the Deluxe Flower Shaping paper. It is the perfect weight for card bases. Cover with a piece of 10B of the paper collection and set aside while we work on the elements.

Stamp the mushroom cottages using Toffee Crunch ink onto watercolor paper and then use the zig markers and the waterbrush to color them. I lay down color onto a acrylic stamping block and use the waterbrush to pick up and color on the watercolor paper. These watercolor pens come in so many colors and you can pick which colors you like the best. Stamp the leaves and little snails using Toffee Crunch and color the leaves with Leaf Green and the little snails are colored with the Zig markers. Then cut out everything with coordinating dies and decide on placement along the bottom edge of the card. Glue everything down.

Stamp the sentiment onto white cardstock using Vibrant Fushia and use one of the arrow dies to cut out. I edge the arrow with Vibrant Fushia and cut off the pointed end. Push behind one of the leaves and glue down. The card is complete. This makes a quick and easy card and it is perfect for mailing with one stamp.

Other Products: Die Cut Machine, Canson Watercolor Paper, White Cardstock,

Instructions:

Card size is 4 1/4 x 5 1/2”. Cut white cardstock to 5 1/2 x 8 1/2”, score and fold at 4 1/4”. Use the leafy vine stamp from HCPC-3989 Large Mushroom Cottage die, stamp a vining background using Leaf Green ink, stamping off on scrap paper first for a softer color. Using the leafy frame from HCD2-7384 Fancy Classic Rectangle Frame, die cut one onto Luxe Gold cardstock, onto Mushroom Cottage paper sheet 8B and from sheet 9A reserving the center piece of 9A. Layer the two leafy frames cut from the paper pad together for durability with the lime green one on top, then lightly offset the gold one behind it creating a golden shadow. Ink the first two words of sentiment onto reserved center cut using Vivid Chartreuse and Emerald Green ink. Adhere onto card base at an angle and trim off the overhang. Repeat this with the leafy frames layering it on top, trimming off anything that hangs over the fold. After cleaning sentiment stamp, ink only the “you” using Vivid Chartreuse and Emerald inks and stamp on green paper from paper pad, then fussy cut.

Stamp the following images from the Mushroom Cottage collection onto white cardstock. Stamp the fence x2, small cottage x2, thatched cottage x2, fairy 2x using Sepia ink. Stamp the leafy vine x2 in Leaf Green ink. Stamp the fairy wings x2 onto vellum using white ink and Bridal embossing powder, heat set. Stamp Wild Poppy Accent using Leaf Green. Use pink colored cardstock to stamp the small Wild Poppy x4 and second smallest Wild Poppy x4 using Magenta Hue ink, then also the small poppy x2 and second smallest poppy x2 using Leaf Green ink onto white cardstock. Diecut with coordinating dies. On cottages, reserve one of each using only the exterior die, then on the remaining cottages, use the window and door die, then finally use a scissors to trim off the roof these will all be used for layering. Use scissors on second fairy image to layer desired areas.

Color the images with the Stack and Store daubers along with the following inks. Color the Mushroom Cottage images using Sepia, Tea Rose, Carnation Red, Vivid Chartreuse, Leaf Green, Emaerald, Manganese Blue Majestic Violet, and Sunflower inks. The vellum is colored on the backside for a soft muted effect. Color the Wild Poppy images using Magenta Hue, Vivid Chartreuse and Leaf Green inks. Use a Hydra Sponge to apply Crystal Lacquer onto poppies, leaves and any other desired areas, allow to dry. Cut the centers out of the green stamped poppies for the center stamen.

Shape the poppies using coordinating mold, and the remaining images using the Deluxe Flower Shaping Kit. Layer two same sized petals together for each flower, then adhere center green stamen using foam adhesive. Apply a circle of dries clear adhesive around center stamen, sprinkle with Hot Mama Prills and tap off. Once dry adhere flowers onto EZ floral wire using hot glue adding vining leaves on wire.

Arrange images as shown and adhere using assorted sizes of foam adhesive, Dries Clear adhesive and hot glue. To add a sparkling touch, add Lichen glitter as desired.

Other Products: White and pink cardstocks, diecutting machine, hot glue gun, scissors, foam adhesive, Lichen glitter

Instructions:

The finished card measures 6 x 4 inches. Cut a piece of deluxe flower shaping paper 8 x 6 inches and score at 4 inches to make a top fold card.  Cut different pieces of paper from Mushroom Cottage Collection as follows: 5 11/16 x 3 11/16 inches in violet paper #12B, 5 1/2 x 3 1/2 inches in pattern paper #4A, 4 1/8 x 2 3/4 inches in lilac #7B, 4 x 2 1/4 inches in pattern paper #4A. Glue each color or pattern paper on a larger colored one. Glue it on your card base with 3D foam dot to give dimension.

Stamp Lush Lilac flowers onto white flower shaping paper with vibrant fushia ink and Sunflower ink. Diecut with the coordinating die. Place facedown into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe Flower Shaping kit tools. In the center of some of the flowers add stamens from Bridal Bouquet set.

Stamp in jet black, mushroom cottage, flowers, leaves, mushroom, and lightning bug from the Large mushroom cottage, mini mushroom cottage and mushroom cottage accents. Cut  with the coordinating dies. Color everything with the zig markers pen. Add 3D crystal lacquer on some elements and let it dry. Glue everything on your card as shown. Add flowers.

With the Ticket and tag die cut a tag in white deluxe paper shaping paper. Ink the edge in green and stamp a sentiment on it from the For My Friend sentiments set. Glue it on your card with 3D foam dots.

Other Products: Die cutting machine Cut’n’boss, heat gun, water mister, hot glue gun, hot glue, scissors,

Instructions:

Cut a 4” x 8” base out of white paper. Then, from the paper collection, cut a piece a little smaller than the base and glue it to the base. Then, cut 3.50" x 7.50" piece from the white paper cut a piece a little smaller from the paper collection. Adhere as shown with Double Dots 100pc. -3D Foam Circles.

Cut a postage stamp from the paper collection with scissors, then cut a slightly larger square from the white paper and glue it under the stamp. Use black ink to stamp the sentiment from the Classic Floral Vase Cling Stamp set.

On white paper, stamp the Mushroom Cottage Accents Cling Stamp Set and Large Mushroom Cottage Cling Stamp Set using black ink and color it with watercolor markers. Cut with coordinating dies. Cover the edges of the large mushroom with glue and sprinkle it with glitter. Glue everything as shown.

Coat some items such as flowers, snail shells and windows with a 4 oz 3-D Crystal Lacquer, then let it dry.

Other Products: Paper trimmer, die cutting machine, watercolor marker, scissors

Instructions:

Ready tent fold card measures 7" × 5". Take a ready card base measuring 7" × 5" and distress edges with sea grass ink. Cut a mat from designer paper using largest die from Filigree Companion Frame die. Distress edges with matching ink and adhere it on card. Cut decorative frames from white cardstock, Luxe Gold Cardstock and designer paper using second largest die from the same set. Glue all frames together and glue on card.  Adhere negative piece which we get after cutting frame and glue that on card using foam dots. Cut decorative pieces from white cardstock and Luxe Gold cardstock using dies from Scalloped Flourish Gateway die set. Glue them on card as pictured. 

For stamens, take floral wire, glue a pearl using hot glue. Cover it with floral tape. Take a piece of floral tape and twist that to create a thin rope. Arrange it on pearl to create pattern. Now cover it with floral tape. Press slightly to create depth.  Paint it using copic markers. Take white floral tape and twist it to create thin rope. cut it into small pieces.  Take Rajni Chawlas's Frosting Powder and add few drops of sunflower reinker to color Frosting Powder. Apply glue on the both ends of floral tape rope pieces and add Frosting Powder on it. Now tie them with floral Buds which we create earlier. 

For flowers, stamp Wild Poppy flower on deluxe flower shaping paper using tea rose ink and cut with coordinating dies. Paint flowers using tea rose and rose madder. Shape flowers using golf tool. Pierce the center of flower, add stamen and layer flowers in alternate manner and glue them using hot glue. For small flowers, stamp small flower from the set  using buttercup ink cut with coordinating die. Paint with same ink and shape with golf tool. Pierce the center and add Bright Bead Stamens-Medium. Stamp leaves from Large Floral Urn, Floral Shoppe Fillers and Wild Aster stamp on deluxe flower shaping paper using leaf green archival and cut with coordinating dies. Paint leaves using same ink and shape using stylus. 

Arrange all the elements on card and adhere them with hot melted glue. Stamp sentiment on white cardstock strip using black archival ink. Distress edges with sea grass ink and adhere it on card using foam dots. For finished look, apply Art Glitter Clear Dries adhesive on flowers and leaves and add Rajni Chawlas's Crystal Clear. 

Other Products: Smooth White Cardstock, Hot Glue, Floral Wire, Floral Tape, Copic Markers, Pearl, Sea Grass Archival

Instructions:

It’s a ready folding card size 9 by 6 inches. Cut a panel on Deluxe Paper measuring 8 3/4 by 5 3/4 and adhere on to the card base using dimensional tape, trim a panel from Mushroom Cottage Paper Collection measuring 8 1/2 by 5 1/2 inches and adhere on the white panel using clear glue.

Die cut 2 circle windows on the Deluxe Flower Shaping Paper using Circle Dies from Eyelet Circle & Basics Small Die Set apply clear glue on the circles and cover with Nida Tanweer Magic Glitter, Add these circles as shown using hot glue.

Stamp the branch and accents from Large Mushroom Cottage Stamp Set and Mushroom Cottage Accents Stamp Set using Leaf green ink on Deluxe Flower Shaping Paper and die cut the images using coordinating dies. Color the images with same ink using daubers and zig clean markers, apply clear glue using sponge and cover with glitter.

Stamp Accents from Mashroom Cottage Accents Stamp Set on the vellum using versamark embossing ink, cover with white embossing powder, heat it using heat tool, die cut with coordinating die and color from the back side using zig brush markers.

Stamp Fairy on Vellum paper using versamark embossing ink, cover images with Snow flakes tinsel embossing powder, heat it using heat tool, die cut with coordinating dies and color the fairy using Zig brush markers from the back side. Die cut shadow die of fairy on the plain cardstock and layer under the vellum image of fairy.

Stamp the small bee from Accents Stamp Set using Rose Madder Archival Ink on Deluxe Card, die cut with coordinating die and cover with glitter.

For the flowers, stamp the images of flower on peach cardstock from Large Wild Rose Stamp Set using Versamark Embossing Ink, cover with white embossing powder, heat it using heat tool, die cut using coordinating die and make 3 flowers using Deluxe shaping kit and hot glue using 3 layers of same size. Add clear glue in the centers and add pearls, glass beads with white mini prills, apply clear glue and cover with Nida Tanweer Magic Glitter.

Arrange all ready elements using hot glue and foam dots, embellish the card with Nuvo Drops.

Other Products: Die Cutting Machine, Peach Cardstock, Vellum Paper, Nuvo Drops, Nida Tanweer Magic Glitter. Pearls, Glass Beads, Snow Flakes Tinsel Embossing Powder, Versamark Embossing Ink, Dimensional Tape.

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 11" x 7 1/2", score at 5 1/2" along the long side and fold to create a base card of 5 1/2" x 7 1/2". Cut a piece of gold cardstock 5 1/2" x 7 1/2" and adhere to the front. Cut a piece of pink pattern paper 5 3/8" x 7 3/8" and adhere to the front of the gold card. Cut a piece of gold cardstock 5 1/8" x 7 1/8" and adhere to the front of the card. Cut a piece of pattern paper 5" x 7" and adhere to the front of the gold card.

Die cut the outer decorative die out of gold cardstock using the No 2. and No. 3 dies from the HCD2-7382 Simply Classic Oval Frame die. Inlay the die with the offcuts of the die for a solid look. Die cut two inner frame dies using the No. 3, No. 4 and No. 5 dies - one out of gold cardstock and one from Deluxe Flower Shaping Paper. Adhere the gold die over the white die and adhere to the centre of the frame.

Stamp the fairy image from the HCPC-3991 Mushroom Fairies Cling Stamp set in Black Onxy ink on Iris cardstock. Colour with Zig Clean Colour Real Brush Markers and die cut with the coordinating die. Trim the wings off. Die cut a background for the fairy out of Deluxe Flower Shaping Paper and adhere the trimmed fairy image to it. Stamp three fairy images on vellum with Versamark ink and emboss with Bridal Tinsel embossing Powder. Colour the wings with Citrus Burst and Firefly inks and die cut with the coordinating die. Add a complete wing to the fairy image and trim the second and third layers of the wings and adhere to the fairy. Adhere the fairy to the centre of the frame as shown. To finish the fairy, add a small irridescent gem to the top of the wings and some Crystal Clear to the wings using clear gloss gel medium.

Stamp the large ivy image from the HCPC-3989 Large Mushroom Cottage Cling Stamp Set in Onyx Black ink on Iris cardstock. Colour with Zig Clean Colour Real Brush Markers and die cut with the coordinating die. Trim and adhere to the top left of the gold frame using some foam dots to create some dimension.

Stamp the fence, bee, mushrooms, and the morning glory images from the HCPC-3992 Mushroom Cottage Accents Cling Stamp Set and the frog images from the HCPC-3989 Large Mushroom Cottage Cling Stamp Set on Iris cardstock. Colour with Zig Clean Colour Real Brush Markers and die cut with the coordinating dies. Add the flower pot images to the right and left at the base of the oval. Adhere the fences to the bottom right and left of the gold frame with foam strips over the flower pot images. Add a pot plant image to the sides on the fences as shown. Trim the mushroom images and adhere to the centre between the fences and to the right fence front.  Add the frog to the left fence as shown.  Add the small morning glory images to the middle of the base of the gold oval.  Add the bees to the right and left.

Stamp the butterfly images from the HCPC-3953 Small Floral Butterfly in Versamark ink on vellum and heat emboss with gold embossing powder. Die cut with the coordinating dies and adhere to the frame .

Stamp the small rose petal images from the HCPC-3752 Classic Rose Cling Stamp Set in Magenta Hue ink. Colour the centres with Buttercup ink and the petals with Pink Peony ink and die cut with the coordinating die. Shape using the groove golf tools. Add Crystal Clear glitter using clear gloss gel medium and when dry add Heart of Gold Prills and then adhere over the ivy leaves on the top left.

Stamp the sentiment image from the HCPC-3975 Oval Floral Frame Cling Stamp Set in Obisidian ink on Deluxe Flower Shaping Paper. Die cut the sentiment with the coordinating die. Die cut two more dies out of Deluxe Flower Shaping Paper and stack the plain dies together before adding the stamped image. Adhere the sentiment to the top inside the frame.

To finish, add Crystal Clear glitter randomly to the card using clear gloss gel medium and a paintbrush.

Other Products: Iris cardstock, Versamark ink, Altenew Obsidian Black Pigment ink, Altenew Citrus Burst ink, Altenew Firefly ink, paintbrush, clear gloss gel medium, irridescent gem

Instructions:

Prepare a white card base 6 x 6" using the Flower shaping card stock. Layer it with a piece of the Mushroom Cottage paper sheet 1A slightly smaller.

Die cut one of the Simply Elegant Centerpiece out with die #2 and adhere to the center of the card. Use the Large die #1 and cut circle out with the center cut out using the small circle die #2. Add foam strips to the back. Set aside. Cut another circle out using the small die #2 from sheet 10A and adhere to the card. Add the circle frame on top.

Stamp the little cottage and Fairy on white card stock. Color with Prisma-color pencils and cut out with the coordinating die. Cut 3 more of the same out, adhere them together, add foam dots to the back and adhere to the card as shown.

Stamp the leaves on sheet 10B from the Clematis set with White Color Box and heat emboss with the white embossing powder, stamp the flowers on velum with the white color box and heat set with the white embossing powder, cut the leaves and flowers out with the coordinating die, shape using the Flower shaping tool kit. Color the back of the flowers with Vibrant Fuchsia ink; put 2 together making one flower with the hot glue. Add both leaves and flowers to the card.

To finish, add glitter to the roof tops and fairy. Add Go Man Go prills to the center of the flowers.

Other Products: Paper trimmer, Die cut machine, Hot glue gun, White color Box,

Instructions:

Fold 6.5 x 13" white cardstock to 6.5 x 6.5" with fold on the top then use the biggest die from the Simply Elegant Centerpiece Die to cut, leaving the top of the die over-hanging fold by about 1/4". Cut out a cutout with the same die from the Mushroom Cottage Paper Collection. Cut out a big, white decorative frame with the Simply Elegant Centerpiece Die. Glue all of them as pictured. Stamp the sentiment in Fern Green ink and Just For You Sentiments stamp and cut it out.

Stamp blossoms from the Wild Poppy Cling Stamp Set in Magenta Hue and French Ultramarine inks onto Deluxe Flower Shaping Paper, color their edges with the same ink and their centers with the Leaf Green ink, diecut with coordinating dies and shape with mold. Add Power Outage prills and Ribbit prills to all flowers. Stamp blossoms from Lush Lilac Cling Stamp Set in Leaf Green, Magenta Hue and Cactus Flower inks onto Deluxe Flower Shaping paper, color them with the same inks and diecut with coordinating dies. Shape them with Deluxe Flower Shaping Kit tools. Put some prills in the center of the flowers.

Stamp branches from Large Mushroom Cottage Cling Stamp Set in Tuxedo Black ink. Stamp branches and mushrooms from the Mushroom Cottage Accents Cling Stamp Set in Tuxedo Black ink. Stamp fairy from Mushroom Fairies Cling Stamp Set with Tuxedo Black ink. Stamp three fences from the Mushroom Cottage Accents Cling Stamp Set in Toffee Crunch ink. Color all elements with colored pencils and cut out with coordinating dies. Use dimensional adhesive and hot glue to attach all elements onto card as pictured. To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers and fairy's wings.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, sisal, colored pencils, self-adhesive crystals

Instructions:

Ready tent fold card measures 7" × 7". First cut a mat from designer paper collection measuring 6.75" × 6.75". Adhere it on ready card base. Cut another mat from designer paper collection measuring 6" × 6". Adhere it on white cardstock which is 1/8 of an inch bigger on all four sides. Cut a circle from it using circle die. Glue a piece of acetate sheet from back side of the mat. Cut a circle piece from designer paper to create window scene. Glue it on card and stamp sentiment using cactus flower ink.  Add sequins and glue second mat using dimensional tape. 

Cut a circle frame from white cardstock using circle dies. Cut 3 decorative pieces from white cardstock using Classic Floral Vase die from die set. Trim die cuts and glue on circle frame as pictured and glue it on card . 

Stamp small Wild Rose flower on deluxe flower shaping paper using magenta hue ink and cut with coordinating dies. Paint flowers using magenta hue ink and violet ink. Shape using stylus. Layer flowers and add prills to the center of flowers. Stamp leaves from Large Floral Urn and Floral Shopee Fillers on deluxe flower shaping paper using leaf green ink and cut with coordinating dies. Paint leaves using leaf green and English IVY ink and shape using stylus.  Arrange flowers and leaves on card and glue them using hot glue.

Stamp fairy on watercolor paper using black archival and paint with zig markers. Cut with coordinating die and glue it on card using foam dots. 

For finished look, apply Crystal Clear on flowers and fairy's wings using designer dries clear adhesive. 

Other Products: Smooth White Cardstock, Watercolor Paper, Dimensional Tape, Archival Ink (Violet), Sequins

Instructions:

The ready top fold card from the smooth white cardstock measures, 7″ by 7″. To prepare the top panel, choose the pattern paper from the designer paper collection and cut it to size measuring 6 3/4″ by 6 3/4 ″. Layer the panel on white cardstock, making a delicate border of 1/8" on all sides. Finally, layer the prepared card front on the card panel using foam dots. 

Next, cut one piece of each die cut from white and Luxe gold cardstock using the Elegant Hearts Centerpiece  Die and glue them together creating a golden shadow. Also, Cut a frame from Luxe Gold cardstock using a Simple Centerpiece die and layer it on the prepared fancy frame to create a beautiful window. 

Choose and stamp all the required images from the Large Mushroom Cottage Cling Stamp Set, Mushroom Fairies Cling Stamp Set, and Mushroom Cottage Accents Cling Stamp Set on smooth white cardstock using jet black archival ink and paint them using Zig Clean Clear Brush Markers. Cut all the images using their coordinating dies. Shape the wings of the fairy with your hands. 

Stamp the florals with Majestic Violet on flower-making paper using Clematis Cling Stamp Set. Cut the florals using its coordinating die set and color the flowers using Magenta Hue and highlight them using Majestic Violet Archival inks. Spritz water and shape the flowers using groove golf tools. Prepare 3 large flowers of 2 petals each and 5-6 filler flowers using the one smallest petal each. Add prills to the flower centers. 

Stamp Leafy foliage from Leafy Accent stamp set with Olive green on flower-making cardstock and cut them using its coordinating die set. Paint the leaves using Leaf Green Archival ink and shape them using golf groove tools. 

Once all the elements are ready, decorate the card using prepared flowers and foliage and add Rajni Chawla's Crystal Clear glitter to the flowers. Finish the card by adding a sentiment strip using Celebrate Love Sentiments Cling Stamp Set. 

Other Products: Smooth White Cardstock, Heat Tool, Die Cutting Machine, Score Board, Funnel Tray, Bone Folder, Glossy Accent, Foam Tapes.

Instructions:

Card size 5” x 7”. Take pattern paper from the collection, tear edges and adhere it using foam tape.

Next cut one die set from HCD2-7349 Palace Gateway Die on white cardstock and adhere it using foam tape.

Now stamp images from HCPC-3989 Large Mushroom Cottage Cling Stamp Set, HCPC-3990 Mini Mushroom Cottage Cling Stamp, HCPC-3991 Mushroom Fairies Cling Stamp, HCPC-3992 Mushroom Cottage Accents Cling Stamp on white cardstock using stazon ink-jet black, cut them with coordinating dies and color them using Zig Real Brush Markers. Adhere them using foam tape, (give some dimension on mushroom images by stamping them two times and cut them with coordinating dies). Add crystal clear glitter.

Cut one die from HCD2-7306 Decorative Circle Frames Die, on white cardstock, and add sentiment from HCPC-3844 For My Friend Sentiments Cling Stamp using archival ink- majestic violet and adhere it using foam tape.

Other Products: Big shot plus machine

Instructions:

Card size: 5 x 6 7/8”. Make a shaped card using the Fancy Classic Rectangle outer die placing the die over-hanging the fold at the top. Using the same die, cut another piece from white heavy cardstock and 1 from decorative lavender paper. Cut the next die in (decorative) and plain die (3rd die) from gold then from aqua decorative paper. Insert the aqua inside gold frame (save gold inside and aqua frame for another card). Cut a foam sheet piece to fit under the framed set. Glue them together then glue the foam to the card front, centering.

Stamp 3 Mini Mushroom Cottages 2 times each (second set is for cutting out windows). Stamp fairy, small mushrooms x2, morning glories x4 and large Ivy leaves using black Memento, die cut and color. Use Wink of Stella on windows and lantern. Pop up the windows and doors on all the cottages. From the back side, slightly shape: lantern, fairy wings, leaves and small mushrooms. Add foam dots under the shaped areas to help them keep their shapes.

Pop up cottages onto card front adding small mushrooms in between (trim or clip apart as needed to fit, save extra pieces for hanging from the vines). Glue the fairy body to the card front above cottages The wings and lantern are popped. Glue the Ivy and Morning Glories to the left and right sides coming from the top of Fancy Classic die cut. Add in upside down mushrooms as desired.

Stamp Hyacinth petals using Deep Purple from Deluxe Flower Shaping Paper, sponge with Majestic Violet, die cut then shape in the mold. Use Deluxe Flower Shaping kit to deepen center “wells” use round needle nose type plyers (used for jewelry making mostly) or a Groove Golf tool to curl each petal end downward. Glue some lavender Prills to the centers then use hot glue to add flowers to the card at the top right and left.

Use Stickles, Wink of Stella and Ultrafine Glitter to flowers, wings, and card front.

Other Products: White cardstock, Stickles, Fun Foam Sheet, Copic Markers: V01, V12, V15, BV00, BV02, B00, B02, YG11, YG05, E50, E51, E21, E53, E00, E01, E93, E11, Y11, Y15, R24, R35, R29, YR61, YR02, YR27

Instructions:

I used both sheets of the background patterned paper sheet 3B. Cut just the middle design out of the second sheet and adhere to the full sheet background using foam tape.

Die cut the Rounded Window image from purple cardstock. Using the small and large circle dies, cut out the photo and a white cardstock mat. Adhere them all together, then add teal gems around the decorative die. Adhere to the middle of the layout using 2 layers of foam tape.

Stamp and die cut 8 of the small and large wing images onto white cardstock using dark brown ink (Staz On- Timber Brown). Add color to these images using Zig Clean Color Markers and a water brush (Violet, Cobalt Blue). First add the larger pieces around the matted photo using Thin 3D Foam Squares, then add the smaller pieces using 3D Foam Squares for a little extra dimension.

Die cut out the title from white cardstock using the Letters and Numbers die. Adhere to the bottom of the layout using liquid adhesive.

Stamp and die cut 2 sets of each of the Clematis and Sweet Pea Flower using brown ink (Staz On- Timber Brown) onto Deluxe Flower Shaping Paper. Add color to the flowers using purple ink (Stampin Up- Elegant Eggplant) and daubers for the Sweet Pea, and I used a water brush to add color to the Clematis. Shape the flowers using the coordinating 3D Shaping Molds. Add Prills to the middle of the Sweet Pea flowers using a liquid adhesive, and add stamen to the middle of the Clematis.

Stamp and die cut 2 of the leaf images using brown ink onto white cardstock. Add color to the images using Zig Clean Color Markers and a water brush (Light Green).
Add the flowers diagonally across the layout. Then add pieces of the leaves around some of the flowers.

Other Products: Stampin Up Ink- Elegant Eggplant, Water brush, Gems, Cardstock (White, Purple), Scrapbook Adhesives by 3L (Thin 3D Foam Squares, 3D Foam Squares, E-Z Runner Ultra, Crafty Foam Tape, Adhesive Dots Medium, Dual Tip Glue Pen)

Instructions:

Cut  Lilac Sheet 7B to 6 3/4 x 7 3/4 inches from the Mushroom Cottage Collection Paper, mat onto white card cut to 7 x 8 inches, adhere onto Sheet 12B from the Paper Pad. Die cut one border strip from the Classic Companion Border Die Set in white card, cut in half, adhere to either side.

Die cut the second largest Filigree Companion Frame Die size 4.75 x 6.75 inches in lilac sheet 7B, adhere to center. Die cut the next size down outline die in blue sheet 9B, adhere inside the white outline die-cut. Ink the edges of the smaller lilac center piece and adhere with foam tape to the middle of the frame Die cut the inner 3.5 x 5-inch die in blue sheet 9B paper, adhere. Die cut the next size outline die in white card, adhere around the edge. Die cut the inner outline die in lilac sheet 7B, adhere around the edge inside the white frame. Die cut the photo in the smallest die and adhere to the center of the frame.

Stamp in Deep Purple ink the Sentiment from the Simple Moments In Time Timepiece, Cling Stamp Set – Good Things Take Time. Die cut with the 2.25-inch circle from the Simple Moments Timepiece Die set, Ink the edges in Dusty Concord ink, adhere to the shaped die cut. Add Dries Clear Glue on one side and foam tape on the other so that it sits well. Stamp in Ranger Distress Antique Linen and die cut the little bee from the Mushroom Cottage Accents Stamp and die set, color in with Antique Linen ink. Adhere.

Stamp in Deep Purple ink three small Wild Roses, shape with the Shaping Stylus from the Flower Shaping Tool Kit, glue a small pearl stamen in the middle, adhere to side of page. Stamp in Leaf Green ink two small leaves from the Leafy Accents Cling Stamp Set, die cut with the matching die. Shape with the Deluxe Flower Shaping stylus and add a little Dusty Concord ink to the edges. Adhere around the Wild Roses.

Stamp in Deep Purple ink, five assorted sizes of Garden Zinnias. Die cut with the matching dies. Place in the Garden Zinnias Flower Shaping Mold, lightly spritz with water and run through a die cutting machine. Tap out and lightly and finish shaping with the stylus from the Deluxe Flower Shaping Tool Kit. Add a little extra ink to the edges with the Daubers and curl the edges up with a pair of tweezers. When dry, pierce a hole in the centers and thread purple stamens through, using a small piece of doubled over wire. Add a little glue between each layer, offset the petals as you go. Adhere to page with hot glue.

Stamp, color using the Daubers and Leaf Green ink and die cut with the matching die, three Large Wild Roses Leaves. Place in the Large Wild Roses Flower Shaping Mold, lightly spritz with water and run through a die cutting machine. Tap out and when dry add a little Deep Purple ink to the edges of the leaves. Adhere around the Zinnia with hot glue. All done.

Other Products: White card, Foam tape, Ranger Distress Ink – Dusty Concord, Hot glue gun, Hot glue sticks, Ranger Distress Antique Linen Ink, Die cutting machine, Piercing Tool, Clear Glitter

Instructions:

Create a 5 x 7" card base with white cardstock. Cut a 4.75 x 6.75" piece of lime paper from the Mushroom Cottage Paper Collection and adhere to card front. Cut a 4.5 x 6.5" piece of lavender paper from the paper collection and adhere.

Cut out the corner dies from the Simply Classic Oval in white cardstock and adhere to corners, cut out the large decorative die from this set in white and adhere, use the oval die to cut out a piece of lavender blue paper and adhere with foam tape, and cut the center decorative die in white cardstock and adhere.

Stamp the vine from the Large Mushroom Cottage Cling Stamp Set and the vines x2 from the Mushroom Cottage Accents Cling Stamp Set in olive, sponge with the same and cut out with coordinating dies, sculpt with stylus. Stamp the large mushroom x2, vine and frog from the Large Mushroom Cottage Cling Stamp Set, and the fairy x2, fence and mushrooms from the Mushroom Cottage Accents Cling Stamp set in Jet Black, color with Zig markers and cut out with coordinating dies. Cut out the wings of the second fairy and attach with foam tape and add crystal lacquer and glitter. Cut out the windows and doors from the second large mushroom and attach with foam tape to the large mushroom house.

Stamp the Sweet Magnolia Blooms Cling Stamp Set in Vibrant Violet, sponge centers with Vivid Chartreuse and the outer petals with Vibrant Violet, cut out with coordinating dies, sculpt with the 3D Magnolia Shaping Mold. Add stamens and glitter.

Stamp sentiment from the Just for You Sentiments Cling Stamp Set in Jet Black on white and cut out with the Arrows and Banner Die.

Adhere scene, sentiment and flowers as shown in photo. Adhere the mushroom house, fairy and frog with foam tape.

Other Products: White Cardstock, Stazon – Vibrant Violet

Instructions:

Cut a 7.25” square piece of paper from the collection and layer onto a 7.5” square piece of purple card, adhere these to the card base.Die cut 6 of the decorative die using white card and adhere one to each corner of the card base, lightly add dries clear adhesive to the die cuts, sprinkle with glitter and remove excess.

Cut a 6” square paper panel to 5.75” square and layer onto a 6” square of highland heather card, add to the centre of the card base using foam pads. Cut the remaining decorative dies in half and adhere to the sides of this panel. Lightly add dries clear adhesive to the die cuts, sprinkle with glitter and remove excess.

Select a smaller panel from the paper collection and cut to 3.75” square, adhere to a 4” square piece of purple cardstock. Die cut the letters from the Letters and Numbers Die using white card and adhere the sentiment to this panel.

Stamp 2 each of the mushrooms using toffee crunch ink. Colour one of each design using dessert sand and toffee crunch and the tops using sweet plum and danube blue inks. Use zig markers to add accents to the mushrooms and to colour the doors and windows on the the 2nd stamped mushrooms. Diecut and shape the mushrooms and add the die cut doors and windows. Cover the mushrooms with crystal lacquer and when dry add to the card using hot glue.

Other Products: Purple card, stamping card, 7.75" square white card base,

Instructions:

Cut a base of cream card stock of size 8 x 11", score and fold to make 8 x 5 1/2" size card base. Use sheet 12B from HCDP1-2140 - Mushroom Cottage Paper Collection to cut 2 pieces of 7 7/8 x 5 1/8" size sheets, slightly sponge the edges with Cactus Flower ink and adhere each on the front and inside of the card.

Use HCD1-7191 -Intricate Swirl Frames Die to cut 2 pieces of the rectangle frame, stack each of them using dimensional tape and adhere on the front of the card to the exact center. Use HCD1-776 - Eyelet Oval Die and cut 1 piece each from cream card stock and sheet 7B from the paper collection. Sponge the designer paper piece with Cactus Flower ink on the edges and stack it with the cream color piece slightly off-centered, adhere this on the center of the rectangle frame using dimensional tape. Cut another oval piece on cream card stock,score the entire piece on every 1/8th inch from the back, sponge the edges with Cactus Flower ink andadhere it to the center of the card as shown.

Stamp the image of fairy from HCPC-3991 - Mushroom Fairies Cling Stamp Set on white card stock with Jet Black ink, color the image using water colors and cut using the coordinating die. Stamp several images of the leaf accents from HCPC-3992 Mushroom Cottage Accents Cling Stamp Set and HCPC-3989 - Large Mushroom Cottage Cling Stamp Set on white card stock using Fern Green ink, color them using water colors and cutusing their coordinating dies. Sponge the edges of the leaves using Cobalt ink.

Stamp several images of the flowers from HCPC-3911 - Wisteria Petals Cling Stamp Set with Aquamarine ink, several of the smallest flowers from HCPC-3906 - Small Wild Rose Cling Stamp Set with Cactus Flower ink on white card stock. Color these images using Aquamarine, Cactus Flower and Rose Madder inks, cut using their coordinating dies and shape them using the stylus tool. Add white micro pearls using dries clear glue for
each of the flower centers.

Arrange all the ready elements on the card front using hot glue and dimensional tape as shown.

Use HCD1-7203 - Ornamental Tags Die to cut 2 pieces of the decorative tag on cream card stock, stack andadhere them together. Using HCPC-3845 - Just For You Sentiments Cling Stamp Set, stamp the sentiment on the die-cut using Cactus flower ink and sponge the edges slightly with the same ink. Add this to the bottom of the flower arrangement using dimensional tape.

Other Products: Dimensional adhesive, hot glue, hot glue gun, funnel tray, scissors, paper trimmer, die cutting machine, scoring board, cream card stock, white card stock, Aquamarine archival ink, Cobalt archival ink, white micro pearls, water colors, paint brushes, Intricate Swirl Frame Die (Retired)

Instructions:

Finished card size is 4 x 6 3/4” (with the fairy). Using the Large Mushroom Cottage Die, cut a 4 1/4 x 6” white tent fold card base just over the fold to create the shaped card base. Cut a full shape and adhere to the card front. Cut another full shape from the Mushroom Cottage Paper Collection sheet 11A, trim the top, stamp the sentiment ‘Birthday Love’ from the Special Birthday Sentiments Cling Stamp set using Memento Tuxedo Black ink and adhere to the inside of the card.

Stamp the Large Mushroom Cottage on white cardstock 2x using Memento Tuxedo Black ink. Color the full image on one using Stampin’ Blend markers and just the windows and doors on the other and diecut using the coordinating dies. Diecut the windows and doors again from white cardstock and adhere behind the stamped images. Adhere the windows and door to the main image using dimensional squares and dries clear adhesive. Spray the cottage with Imagine Sheer Shimmer Craft Spray – Sparkle. Adhere to the card front.

Stamp the fairy from the Mushroom Cottage Accents Cling Stamp set 2x, once on white cardstock using Tuxedo Black ink and once on vellum using VersaColor white pigment ink. Color the Tuxedo Black fairy image using Stampin’ Blend markers and the wings with Distress Oxide Peacock Feathers and Wilted Violet inks, then paint the whole image with Wink of Stella – Clear. Cover the VersaColor image with WOW Sparkling Snow Embossing Glitter and heat set using the Heat It Tool. Diecut both using the coordinating die. Color the vellum wings on the back side using Peacock Feathers and Wilted Violet inks, fussy cut the wings and adhere to the cardstock image by using a little dot of dries clear adhesive at the fairy’s back. When the glue dries, fold up the vellum wings a little bit to give the appearance of flight. Adhere the fairy to the cottage roof using dimensional squares and dries clear adhesive.

Stamp the Frog from the Large Mushroom Cottage Cling Stamp set and the flowers from the Mushroom Cottage Accents Stamp on white cardstock using Tuxedo Black ink, color with Stampin’ Blend markers and diecut using the coordinating dies. Diecut again from plain white cardstock and adhere behind the stamped diecuts. Lightly shape using the Deluxe Flower Shaping kit, spray with Imagine Sheer Shimmer Craft Spray – Sparkle and, when dry, adhere the flowers to the roof of the cottage using dimensional squares and adhere the frog to the bottom left of the cottage using hot glue.

Other Products: Diecutting Machine, White Cardstock, Misti, Funnel Tray, Distress Oxide Inks – Peacock Feather and Wilted Violet. Dimensional Squares, Hot Glue Gun, Wink of Stella – Clear, Stampin’ Blend Markers – 1000, Dark Fresh Freesia, Dark Highland Heather, Light Soft Suede, Light Pool Party, Light Daffodil Delight, Light Granny Apple Green, Light Melon Mambo, Dark Smokey Slate

Instructions:

Create 5 x 7” card base using white paper and largest Fancy Classic Oval Frame Die. To create top base, cut piece from designed paper collection using same die and place on the base of card. Die cut an outer frame from gold paper and paper collection using the decorative die from the same set and adhere to the card base using 3D foam tape for dimension.

To create Clematis flowers, stamp Clematis Cling Stamp on white paper with Ranger Archival Ink Pad - Majestic Violet and cut using the coordinating dies. You will need 2 petals of each to create flowers, for bigger flower use the biggest stamp, for smaller flower use smaller size stamp. Colour the flower with Ranger Archival Ink Pad - Majestic Violet using a sponge dauber. After colouring, place the flowers into the mold and run through cutting/embossing machine. Pierce the center and glue in some stamens using hot glue gun. Add a little hot glue to the underside of the flower. Add little glue around stamens and sprinkle prills, leave it to dry.  Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Stamp the Leafy Accents Cling Stamp Set and on the white paper with Ranger Archival Ink Pad - Leaf Green, cut out with the coordinating die, shade using this same ink and shape leaves using mold. Sponge the leaves with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Stamp frog and leaves using Large mushroom cottage cling stamp on the white paper with Ranger Archival Ink Pad - Leaf Green, cut out with the coordinating die and shade using this same ink. Sponge the leaves with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine