Instructions:

Card size is 4 3/8 x 6”. Cut white cardstock to 8 1/4, score at 4 3/8”. Cut paper from the Feathery Florals Paper collection to 3 11/16” x 5 1/2”. Use Medium Filigree Frame center die to diecut an opening into card panel and also the front of card base. Ink edges of panel with Stack and Store dauber along with white ink to give the edge a frosted appearance, then sprinkle with Bridal Embossing Powder, heat set. Adhere panel onto card base using foam adhesive. Diecut 5 frames using the Filigree medium frame and the coordinating center, adhere all 5 layers together for a thicker frame using Dries Clear glue. Apply Dries Clear glue onto Hydra sponge, dab randomly onto frame and sprinkle with Rajni Chawla’s Crystal Clear and adhere onto card front.

Use Olive and Leaf Green ink on the foliage of the the small Feather Floral stamp and Magenta Hue and Rose Madder on the flowers to stamp the inside of card base so it’s visible through the front opening of card. Be sure to stamp off on scrap paper for a softer image. Color using Sponge dauber and Vivid Chartreuse & Rose Madder ink to softly color the images. You may need to create a mask from the outline of the diecut image so it’s easier to color within the lines. Cut a purple sheet of paper collection to 4 3/16” x 5 13/16”. Use the small feather stamp along with Magenta Hue and Majestic Violet ink to stamp images onto panel creating a background. Use paper trimmer to cut rectangle out of this purple panel to create a frame. Ink edges with Majestic Violet ink and adhere on inside of card.

Stamp images onto white cardstock. Stamp small feather and large feather using Forget Me Not, Rose Madder and Majestic Violet ink. Stamp the medium feather using Gold ink, emboss in gold, heat set. Stamp Small Feathery Floral using both Olive and Leaf Green ink. Stamp one of the Petite Feathery Florals stamped in Rose Madder that you’ll use for the flower.

Diecut images with coordinating dies, then diecut an additional medium feather from Luxe Gold cardstock for layering. Color medium feather with Sunflower and Magenta Hue ink, adhere onto card Luxe Gold, slightly offset for a shadow effect. Color images Feathery Florals foliage with Vivid Chartreuse and Leaf Green ink, snip apart using scissors. Use Hydra sponge to apply Crystal Lacquer onto leaves for a soft sheen, allow to dry. Color flower from Petite Feathery Florals using a scissors. Color softly with Rose Madder ink and shape using Deluxe Flower Shaping Kit. Pierce the center then insert two stamens and secure with glue. Use the stylus handle to give a slight shape to feathers, adhere onto card front using foam adhesives.

Stamp sentiment onto white cardstock using Magenta Hue and Majestic Violet ink. Trim apart with paper trimmer and adhere onto card with foam adhesive. Add Baby’s Breath glitter as desired.

Other Products: White Cardstock, Foam adhesive, paper trimmer, scissors, Tidy Tray

Instructions:

The ready side-fold slimline card from smooth cardstock measures 9 1/2" by 4 1/2". To prepare the card base, cut the paper measuring 9" by 9 1/2 " and score at 4 1/2" on 9" length and crease well. 

For the card front, choose the pattern paper from the Feathery Florals Paper collection and cut measuring 9" by 4" and layer it on the ready card base creating a delicate border of 1/16" on all four sides. Choose another coordinating paper from the same paper collection and cut measuring 8 3/4" by 3 3/4" and mat it on the white cardstock making a delicate white border all around. Layer this on the card front using dimensional tapes. 

Cut one piece each using white and gold cardstock using Slim Gateway Rectangle Die and adhere them together keeping the gold one on the bottom a little off-center creating a delicate gold shadow. Layer the die cut on the card front using foam dots. 

Stamp a couple of petals with Hero Arts white pigment ink on Vellum Flowerite cardstock using Classic Rose Stamp set and sprinkle white heat embossing powder. Dust extras and heat set them using a heat tool. Cut the petals using their coordinating die set. Color the petals using Seedless Preserves Distress Oxide ink. Spay some water, put the petals in the flower mold and run them through the die-cutting machine. Shape them a little with flower-shaping tools and form 2 large roses and one medium rose. 

Stamp the butterfly with Hero Arts white pigment ink on Vellum Flowerite cardstock using Delightful Daffodil and Butterfly Stamp set and sprinkle white heat embossing powder. Dust extras and heat set them using a heat tool. Cut the butterfly using the coordinating die set. Stamp a few wisterias using Cactus archival ink and cut using their coordinating die set. Color them using the same ink. 

Stamp 3 Leafy Accent vines using Olive Green archival ink on Deluxe Flower Shaping Paper, color them using Leaf Green, and cut them using its coordinating die. Next, shape them using the coordinating mold.

Once all the elements are ready, assemble the flower bouquet on the left-side bottom corner of the card and finish the card by adding a sentiment strip from the Feathery Floral Paper collection. 

Other Products: Smooth white cardstock, Die Cutting Machine, Score Board, Hero Arts white pigment ink, Funnel Tray, and Seedless Preserves Distress Oxide.

Instructions:

Card size:  5 1/4" x 6 1/2". Cut white cardstock 6 x 11 3/4" then score at 3 1/2 and 8 1/4", fold in. Cut 3 pieces of pink and green decorative paper to fit each panel then glue 1 on flap, 1 inside and 1 on pocket outside. Glue the pocket sides to inside to form pocket. On left end (flap), place the circle inset die and the curved plain edge die along the edge and cut to make a decorative edge for the flap. Cut this same decorative edge on a piece of gold to fit under flap so that the gold shows slightly. Cut a piece of gold about 1/4" wide to cover any seam made on the inside of flap.  Wrap a gold ribbon around entire flap above the decorative edge.

Cut 2 tags from decorative paper using the Ticket and Tags die set., insert gold ribbon at the tops then place inside of pocket. Stamp sentiment using Magenta Hue onto white, die cut with oval then die cut another oval a little larger from gold. Glue together then glue to inside on top of pocket top edge.

Use black to stamp the Petite Feathery Florals and Butterfly. Die cut then color. Glue the butterfly to the pocket (make sure it shows when flap is closed). Glue the Petite Feathery floral to the top of flap over ribbon (leave room on the left side for Lilies).

Stamp Lilies using Sunflower and using Magenta Hue, sponge then die cut and form in the mold. Insert stamens then glue to the card flap left side.
 
Glitter all the flowers and butterfly then make a gold bow and glue it under Lilies.

Other Products: Gold ribbon, White cardstock, Copic Markers: Y11. Y15, Y38, YG61, YG82, RV55, RV63

Instructions:

Score a 4 1/4" x 11" white cardstock at 1 1/2" and 7", fold the cardstock at both the scored lines to make the fun fold card base. Die cut 2 pieces of white cardstock using the dies from Delicate Daisy Corner & Border Die. Die cut a piece of white cardstock using the die from Curvy Accent Border Die. Adhere the die cuts on the cardbase as shown. Trim the extra die cut hanging out side the edge.  

Stamp the image from Budding Rose Heart Cling Stamp set on a piece of deluxe flower shaping paper using jet black archival ink. Die cut it using matching die from Budding Rose Heart die. Colour the image using Zig clean colour brush pens. Adhere the top portion of the coloured and die cut image on only the top flap of the card as shown.

Other Products: Scissors, die cut machine

Instructions:

Ready tent fold card measures 4"× 9". Cut a mat from designer paper measuring 3.75" × 8.75", distress edges with matching ink and adhere it on ready card base. Take another piece of designer paper measuring 2.5" × 7.5", glue it on white cardstock of same size. Adhere it on card using dimensional tape. Cut a decorative frame from white cardstock using Slim Eyelet Heart Rectangle die. Glue it on card as pictured. Cut one oval piece from Gold cardstock and one from designer paper using oval die set. Stamp sentiment on designer paper oval using black archival ink. Glue both oval pieces on card using dimensional tape. 

Stamp floral image and feather image on white cardstock using black archival and paint with leaf green archival and cut with coordinating dies. Stamp some feather images on vellum paper using white ink and heat emboss using white embossing powder. Cut with coordinating dies and paint with distress oxide ink. Stamp Clematis flower on deluxe flower shaping paper using magenta hue ink and cut with coordinating die. Paint flowers using magenta hue and cactus flower ink. Shape using ball tool, pierce the center and add stamens. Stamp Wisteria Petals flowers on deluxe flower shaping paper using sea grass ink and cut with coordinating die. paint using same ink and shape using ball tool. Arrange all elements on card using hot glue as pictured.

For finished look, apply glitter using designer clear dries adhesive. 

Other Products: Smooth White Cardstock, Dimensional Tape, Sea Grass Archival, Distress Oxide inks

Instructions:

Create a 6 x 6 inch card base in white cardstock. Cut a 5.5 x 5.5 inch piece of lavender paper from the Feathery Florals Paper Collection and adhere to card front. Cut the frame from the Courtyard Elegance Die in white card stock and adhere to card front. Cut out the center die in green designer paper and adhere with foam tape.

Stamp the flowers x2 from the Flowery Feathers Cling Stamp Set, the butterfly from the Petite Feathery Florals Cling Stamp Set and the small feathers from the Floral Feathers Cling Stamp Set in Jet Black. Sponge flowers with Sunflower and Vivid Violet, Olive and Vivid Chartreuse, sponge the butterfly and feathers with Paradise Teal, Vivid Violet and Vivid Chartreuse, cut out with coordinating dies. Cut one of the flowers apart and adhere together with foam tape for added dimension. Add glitter to all.

Stamp the sentiment from the Just for You Sentiments Cling Stamp Set in Jet Black and cut out with the Arrows and Banner Die.

Adhere feathers, flowers, butterfly and sentiment as shown.  

Other Products: White cardstock

Instructions:

Prepare a 5 x 7" white card base. Trim the front right side using the Curvy Decorative Border die.  Use a piece of the Feathery Floral paper 1/8 inch smaller, trim the right side of it also and adhere to the card. Using the same paper cut another piece smaller for the inside.  Cut a white border from the same Curvy set and add to the front of the card.

Stamp both the Floral Feathers on white with the Emerald green ink, color with the New Sprout, cut out with the coordinating die, adhere both pieces on the front of the card.

Stamp the Clematis flowers on white with the Majestic Violet ink, cut out with the coordinating die, lightly color the centers with the same ink, place in the matching mold and run through the die cut machine to shape.  Put 2 flowers together making one flower with the stamen in the center. Add the flowers on top of the Floral Feathers.

To finish, add glitter to the feathers and flowers.

Other Products: Paper Trimmer, Die cut machine, Hot glue gun,

Instructions:

My finished card size is 4 1/4" x 5 1/2".  Cut white cardstock 4 1/4" x 11" and score at 5 1/2". This makes a tent fold card. On the front side of the card measure down 2 1/2" and cut.  Cut this piece down to a 3" X 3" piece of cardstock and set aside.  

Cover the inside and the front flap of the card with pieces of Sheet 2B of the paper collection. Then cover the 3" square piece of cardstock with a piece of Sheet 5A of the paper collection.  

Stamp the feather using Leaf Green ink and color using various Prismacolor pencils. I used various shades of violet and green but you can use your imagination and color however you like. Use coordinating die to cut out the feather. Add glitter using a sponge with adhesive on it then sprinkle the glitter over. Allow to dry.

Stamp the Lush Lilac flowers in Cactus Flower ink and color the edges with same. Use coordinating die to cut out. Lay onto mold, spritz with water and run through the die cut machine. Turn out onto the desk to dry. Once dry add some glitter using the same sponge and adhesive. Also add Prills to the center of the flowers and allow everything to dry.

Decide on placement of flowers and feather and glue down onto the 3" X 3" square piece. Glue the 3" piece to the flap and allow to dry.

Cut out one of the sentiments from Sheet 6A and mat with a piece of white cardstock.  Glue this to the bottom of the card and it is ready to go.

This makes a quick and easy card with lots of interest and it will become a favorite I'm sure.

Other Products: Hot Glue Gun, White Cardstock, Die Cut Machine, Prismacolor Pencils (PC912-Apple Green, PC-742 Violet, PC-1000 Imperial Violet, PC-994 Process Red, Odorless Mineral Spirits, Blending Stumps

Instructions:

Cut out a 4 1/2" x 9 1/2" card base, then cut a slightly smaller rectangle from your paper collection and glue it to the base.

From white paper and from the paper collection, alternately cut out all the pieces from the Slim Elegant Rectangle Die set. Glue with Double Dots 100pc. -3D Foam Circles as shown. On the smallest element, stamp the sentiment from the Cheerful Note Sentiments set with black ink.

On the white paper, stamp the elements from the Petite Feathery Florals Cling Stamp set with black ink. Then color with inks: Archival French Ultramarine, Memento Sweet Plum and Memento New Sprout. Cut with a matching die. Shape with the Deluxe Flower Shaping Kit. Add glue and yellow Prills to the center of the flowers.

Glue everything as shown and cover with glue and glitter.

Other Products: Cutting machine

Instructions:

Cut a piece of white cardstock to 7 x 10", score at 5" and fold to get a base. Cut out 2 pieces of paper from the Feathery Florals Paper Collection to 6 13/16 x 4 13/16". One of them adhere to the base. To the second one add a little bigger white cardstock and cut out their edges with the border from the Curvy Decorative Border Die. Cut out a white and a silver border from the same die set. Stamp 2 feathers with Floral Feathers Cling Stamp Set in Leaf Green ink, color them slightly and cut out with coordinating dies. Cut out a sentiment from the Feathery Florals Paper Collection. Adhere all elements to the base. 

Stamp blossoms from the Garden Lily Cling Stamp Set in Cactus Flower ink onto Deluxe Flower Shaping Paper, color their edges with the same ink and their centers with the Sunflower ink, diecut with coordinating dies and shape with mold. Add Petite Pollen Stamens to all lilies. Stamp blossoms from Lush Lilac Stamp Set in Cactus Flower ink onto Deluxe Flower Shaping paper and diecut with coordinating die. Shape them with Deluxe Flower Shaping tools and add some Ribbit prills. Stamp 2 branches from Leafy Accents Cling Stamp Set in Fern Green ink, color them with Leaf Green ink, cut out with coordinating die and shape with coordinating mold. Stamp 5 branches from Cottage Tree 'scapes Cling Stamp Set in Fern Green ink, color them with Leaf Green ink and cut out with coordinating die. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers. Add some self-adhesive crystals.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, sisal, colored pencils, self-adhesive crystals

Instructions:

Folded ready card base is 6 1/2 by 6 1/2". Trim gold luxe card which is smaller then base and add on the card base using dimentional tape, trim the square panel from sheet number 9A and adhere on the golden panel on the card using clear glue.

Trim another square panel from sheet number 9A and adhere top right and bottom left corner on the card and fold other 2 sides as shown using hot glue.

Stamp the images from Petite Feathery Florals Cling Stamp Set on the deluxe card using leaf green ink, die cut using coordinating dies and color it using Zig brush markers. Shape from the back using shaping kit, apply clear glue using sponge and cover with Nida Tanweer Magic Glitter Powder. Stamp the butterfly with seedless preserves on the deluxe card and color with same color and cover with Magic glitter.

For the flowers, stamp the classic rose images on the Lime Paper using Kitsch Flamingo Ink, color it with dusty Concord ink using daubers, die cut with coordinating dies. Shape the flowers in 3D shaping mold and finish shaping using shaping kit and make a few flowers using hot glue. Apply clear glue on the flowers using sponge and sprinkle some Nida Tanweer Glitter Powder. 

Arrange all ready elements as shown using hot glue.

To finish it off, add pearls beads, Nuvo Drops and pearl strings.

Other Products: Cream Card, Lime Cardstock, Kitsch Flamingo ink, Dusty Concord Ink, Hot Glue, Nida Tanweer Magic Glitter Powder, pearl string, Pearl beads, Novu Drops.

Instructions:

Make a slim line card base. Cut white cut stock 8"  x 8 3/4" and score at 4"on the shorter side. Fold to make a slim line card. Cut a piece of paper from gold card stock a little smaller than the card base and adhere on the card front. Cut pattern paper a little smaller than the gold mat layer and add on the card front.

Cut a piece of white die cut from the slim eyelet  heart  rectangle die. Trim the longest sides to add as borders along the top and bottom of the card. Cut the two corners using the outer layer of die from the Delicate Daisy corner dies from gold paper and the white die cuts using the inner decorative die and adhere these two pieces on the  corners of the card base.

Stamp the floral images from the feathery floral stamp with jet black ink on Deluxe flower shaping paper and colour with Zig markers. Then cut them with the coordinating die. Stamp the feather images from the Petite feathery floral stamp set with black ink and colour with Zig markers and cut with the matching die.

Make flowers from the Rustic sunflower stamp set. Stamp the images from the Rustic sunflower stamp set with Cactus flower ink on the Deluxe flower shaping paper. Colour with a shade of Cactus flower, Deep purple and Sunflower ink. Cut with the matching die and shape the flowers in the 3D flower shaping mold. Layer 2 big and one small flower together. Cup them further and add the mix of two prills in the centre using designer dries clear glue.

Stamp the butterfly with Jet black ink on Deluxe flower shaping paper and colour with Zig markers. Then cut with the coordinating die.

Cut an A2 card panel from the pattern paper. Add white cardstock at the back  and adhere on the centre of the card in a tilted manner.

Arrange the painted images and the flowers on the base of this card panel. Cut a long sentiment strip from the paper collection and add on the card to finish it.

Other Products: Scoring board, die cutting machine, glue sticks, hot glue gun

Instructions:

Die cut the largest plain rectangle frame die using paper from the collection and adhere to a white card die cut of the same shape. Die cut the largest decorative rectangle frame using luxe gold card and adhere to the card panel.

Score and fold a 7” x 9” piece of card at 4.5” place  the large plain die over the fold and die cut to create the shaped card base, adhere the decorative panel to the front of the card base.

Die cut the 5.5” x 3” die from the royal elegance frames using luxe gold card, adhere a plain oval die cut of paper from the collection to the centre of the oval and adhere to the centre of the card base using foam pads. Cut a sentiment strip from the paper collection and trim to slightly longer than the width of the oval. Adhere into place across the centre of the card allowing the paper to bow in the centre.

Stamp the wild roses onto flower shaping paper size using rich razzleberry ink and die cut colour using rose bud ink on both sides of the die cut petals, lightly spritz with water and shape using the flower shaping tools and groove tools. Adhere 2 layers of petals together using dries clear glue and layer 4 sets of petals for the larger flower at the bottom of the arrangement. Drop a small amount of hot glue into the centre of the floral and cover with heart of gold prills, allow to cool and remove the excess.

Stamp the feathery florals x2 of each onto flower shaping paper using olive grove ink, colour using bamboo leaves and die cut. Add additional olive grove to shade the greenery and colour the flowers on one of each of the feathery florals using rose bud ink. Snip away the florals from the other 2 die cuts and shape all using the flower shaping tools.

Arrange the flowers and greenery top and bottom of the small oval and hot glue into place. Apply dries clear adhesive to the top edges of the flowers and sprinkle with clear glitter, knock off the excess.

Other Products: Rich Razzleberry ink - Stampin Up, white card, hot glue

Instructions:

Cut a piece of white cardstock 10” x 7”, score at 5” along the long side and fold. Place the outer Majestic Swirl Frames Die over the folded card with one edge slightly over the folded side and die cut to create the shaped card. Cut single piece using this same die from patterned paper and place into card using Designer Dries Clear Adhesive. Die cut an outer frame from silver Cardstock and paper collection, glue it together and make sure to offset them. Add to the front of the shaped card using Adhesive Foam Strips. Die cut an outer frame from purple patterned paper and place into card using  Adhesive Foam Strips.

To create Clematis flowers, stamp Clematis Cling Stamp on white paper with Ranger Archival Ink Pad - Vibrant Fuchsia and cut using the coordinating dies. You will need 2 petals of each to create flowers, for bigger flower use the biggest stamp, for smaller flower use smaller size stamp. Colour the flowers with Ranger Archival Ink Pad - Vibrant Fuchsia using a sponge dauber. After colouring, place the flowers into the mold and run through cutting/embossing machine. Pierce the center and glue in some stamens using hot glue gun. Add a little hot glue to the underside of the flower. Add a little glue around stamens and sprinkle prills, leave it to dry.  Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

To create leaves stamp the Hollyhock Stem & Blooms Cling Stamp Set on the white paper with Ranger Archival Ink Pad - Leaf Green, cut out with the coordinating die, shade use this same ink and shape. Shape leaves using mold. Sponge the leaves with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

To create Floral Feathers stamp the Floral Feathers Cling Stamp Set on the white paper with Ranger Archival Ink Pad - Majestic violet, cut out with the coordinating die, shade using this same ink and Ranger Archival Ink Pad - Manganese Blue, shape. Sponge the leaves with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Cut sentiment and place onto the card using adhesive foam strips. Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine,

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 9 1//2” x 8”, score at 4” along the 8” side and fold to create a 4” x 9 1/4” card.  

Die cut the eyelet rectangle from gold cardstock using the No. 1 die from the HCD3-7431 Slim Eyelet Rectangle Die. Die cut the plain rectangle from the pattern paper using the No. 1 die from the HCD3-7432 Slim Basic Rectangle Die and adhere to the front of the eyelet rectangle.  

Die cut two decorative dies from the HCD3-7447 Slim Elegant Rectangle Die - one from Deluxe Flower Shaping Paper and one from gold cardstock. Add Frosting Powder to the white decorative die with Dries Clear glue on a sponge and adhere to the gold decorative die offsetting them slightly and then adhere to the pattern paper.

Stamp the tall vase image from the HCPC-3982 Classic Floral Vase in embossing ink and heat emboss with gold embossing powder. Adhere to the front of the card with foam tape.

Stamp the floral feather images from the HCPC-31019 Floral Feathers Cling Stamp Set in Jet Black ink on Iris cardstock. Colour with Zig clean Colour Brush Real Brush Markers and die cut with the coordinating dies. Trim the stem and adhere the larger image to the top of the vase. Die cut two plain images from Deluxe Flower Shaping Paper using the smaller floral feather image. Adhere the plain dies behind the painted images and then adhere to the front of the vase with foam tape.

Stamp the butterfly image from the HCPC-31018 Petite Feathery Florals Cling Stamp Set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Real Brush Markers and die cut with the coordinating die. Adhere to the card over the leaves on the top left  of the card over the leaves and flowers with foam squares. Add Crystal Ultrafine Glitter to the butterfly wings with Dries Clear glue.

Cut a strip of vellum 1” wide. Die cut the sentiment from the HCD3-7449 Slim Eyelet Heart Rectangle Die out of gold cardstock. Adhere to the strip of vellum and then adhere to the decorated panel folding the edges behind the panel. Adhere the panel to the front of the card.

Other Products: Iris cardstock, foam squares, Hero Arts Embossing and Watermark ink

Instructions:

Cut a piece of white cardstock to 9 1/8” x 7” and score in half at 3 1/2”.  Using the HCD3-7431 Slim Eyelet Rectangle Dies and Luxe Gold Card Stock cut one piece from the largest die and one from the second largest die from the set. Now from the HCD3-7432 Slim Basic Rectangle Dies, cut the largest and 3rd largest from the HCDP1-2149 Feathery Florals Paper Collection Sheet 3B (large) and 11B (Smaller).Glue these patterned papers to the Luxe Gold cut in the previous step. Layer these as shown using 3D foam tape to the card base. Using the HCD3-7449 Slim Eyelet Heart Rectangle Die Set cut the sentiment dies from both white and Luxe Gold Cardstock. Glue these layers slightly off set so that the gold peeks out from behind the white top layer. Glue these along the bottom of the peach colored paper on the card front. Using the HCD1-7228 Lacey Diamonds Die Set use the two smallest dies together and cut two times out of white card stock. This will cut the inner portion of both diamonds. Using the 2nd largest die from the HCD1-7226 Diamond Basic Die Set, and the largest and 3rd largest dies from the HCD1-7227 Eyelet Diamond Die Set cut the outside portions of the diamond pieces. Before assembling as shown, apply dries clears glue with a hydra sponge to each of the die cuts and sprinkle with Art Glitter in Crystal. Once dry, layer the diamonds, using both Dries Clear adhesive and Adhesive Foam Strips to achieve some depth and dimension between layers. Attach the diamonds to the card base by over lapping them slightly. TOP TIP: Use 3D Adhesive and Double Dots Foam Circles to help with the multiple heights.

Using HCPC-3948 Sweet Magnolia Blooms Cling Stamp Set Stamp the medium flower 2x and the small flower 3x onto Deluxe Flower Shaping Paper using Carnation Archival Ink. Using HCD1-7453 Feathery Florals Cling Stamp Set Stamp the large floral spray 2x and then small floral spray 1x onto the same white paper with Olive Archival Ink. Now Using HCDA2-450 Stack and Store Daubers color the flowers using Pink Peony and Carnation Archival Inks. Then color the Floral Sprays using the Leaf Green and Olive Archival Inks. Then cut out with the coordinating dies. Before running the Sweet Magnolia flowers through the coordinating 3D Mold, ink the edges of the flower petals with Geranium Archival Ink. Once shaped with the shaping mold, use the Deluxe Flower Shaping Kit to press the centers of each flower and to pierce a hole into the center of each flower. Now add some Bright Pearl Stamens - Small into the center of each flower and secure with hot glue. Lastly, add Rajni’s Crystal Clear Glitter to the flower tips using a Hydra Sponge and Dries Clear Adhesive.

To complete the card, simply arrange the floral sprays onto the card and adorn with Sweet Magnolia Flowers. Adhere with a glue gun for a secure placement. Lastly, add pearls with a glue gun strategically placed around the card and add a few sequins on the flower petals using Dries Clear Adhesive. Finish the inside of the card with Luxe Gold, designer paper and white cardstock die cut using the Using the HCD3-7431 Slim Eyelet Rectangle Dies and the HCD3-7432 Slim Basic Rectangle Dies. 

Other Products: Pearls, Sequins, Scissors, Paper Trimmer, Glue Gun, Glue Sticks, 3D Foam Tape, 3D Foam Dots, Die Cut Machine

Instructions:

The finished card measures 9 x 4 inches. Cut one piece of white cardstock in deluxe flower shaping paper 9 by 8 inches and score at 4 inches to make a top fold card. Place Slim Ornate rectangle die about 1/2" up past fold so that fold does not get cut. Use the same die again on a piece of paper #11B from the Feathery Florals Collection. Ink the edge with coral ink and glue it to the folded card matching bottom and side edges.

Die cut the second biggest die from the same kit in the Deluxe Flower Shaping paper and glue it on the card. In pattern paper #3B cut a 6 1/4 x 2 1/4 inch piece of paper with the same die, ink the edge with coral ink. Put cheesecloth and sewing thread in the middle of the card and glue your piece of paper over it.

Stamp your Wild Rose flowers with red geranium ink onto white flower shaping paper, color the center and shade the edge with the same color. You can also color the back of the flowers. Diecut with the coordinating die. Place face down into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe flower shaping kit tools. Glue 2 layers together. In the center of the flowers add prills and crystal lacquer.  

Also stamp and die cut image with leaf green and color it with zig markers. Glue it in the middle of the card. Glue 3 flowers over it.

Die cut sentiment from the same kit in paper #6A (4 x 1/2) and glue it next to your flowerst.

Other Products: Die cutting machine Cut’n’boss, heat gun, water mister, hot glue gun, hot glue, scissors, sewing thread, cheesecloth, sewing threat,

Instructions:

Card size 5” x 7” (final size). Take pattenr paper from HCDP1-2149 Feathery Florals Paper Collection and adhere it on card base.

Take white cardstock size 7” x 4.5”, and on one end cut HCD3-7435 Curvy Accent Border Die, and at the back of the die add pattern paper using plane curve die, add feather image using HCPC-31019 Floral Feathers Cling Stamp using archival ink-orange blossom, adhere it with foam tape. From same  die set cut two decorative border die on pattern paper, and adhere one die on white cardstock and one on card base, as shown.

Stamp feather image from HCPC-31019 Floral Feathers Cling Stamp on white cardstock using versamark ink and sprinkle gold embossing powder, heat it and cut with coordinating die and sprinkle crystal clear glitter, adhere them using foam tape.

Cut one die from HCD3-7447 Slim Elegant Rectangle Die on white cardstock and add sentiment from HCPC-3848 Cheerful Note Sentiments Cling Stamp using archival ink-monarch orange, add clear beads, as pictured.

Other Products: Big Shot Plus Machine

Instructions:

Create a top fold card measuring 7 1/2” x 5 1/2”.  Choose a designer paper from Feathery Florals Paper Collection and cut it to the size 7 1/4” x 5 1/4”. Adhere it on white card base. Cut a decorative frame twice from white cardstock using Rectangle Filigree Frames Die. Glue both together and adhere it on card. Cut designer paper from Feathery Floral Paper Collection using same die. Take negative piece and cut it using solid die from same set. Now die cut the medium decorative frame using the second die from the Rectangle Filigree Frame Die out of gold cardstock and adhere to the front of the card as shown.

Choose and stamp the images from the Petite Feathery Florals Cling Stamp Set, stamp each image twice on smooth white card-stock using jet black archival ink and paint them using Zig Clean Clear Brush Markers. Cut all the images using their coordinating dies. Trim the flowers and butterfly from one image and layer it on the second image to create dimension. Now give shape by using Deluxe flower shaping kit. Add Heart of Gold prills to the centre of flowers.

Add all the ready elements to the card as pictured. Also cut a sentiment  from same designer paper and add to the card using foam tape.For final look, apply Crystal Clear powder to the images using Art glitter dries clear glue. Also add some crystal beads to the card as shown.

Other Products: Die Cutting Machine, Score Board, Bone Folder, Smooth White Cardstock, Scissors, Rangers golden Heat Embossing Powder, Heat gun, VersaMark ink.

Instructions:

Take Ivory cardstock of size 9 x12 inches, score and fold in the center to create a base of 9 x 6 inches in size. Using the designer paper from HCDP1-2148 Ornate Peacock Paper Collection, cut 2 pieces of size 1/8th of an inch less than the card base and adhere to the front and inside panels.

Use HCD1-7370 Simply Elegant Centerpiece Die, to cut the decorative piece of Ivory cardstock and a mat layer with the designer paper. Adhere the die-cut and mat layer together, cut the element into 2 halves and add this to the card front as shown using dimensional tape.

Cut 2 other pieces of Ivory cardstock measuring 9 x2 1/2 inches. Dry emboss one of the pieces and sponge the embossed area using Fern Green ink. Sponge the edges of the other piece with Goldenrod ink. Adhere the 2 pieces, with the embossed piece cut slightly smaller than the second one and add them to the card front in the center.

Stamp and White heat emboss few images from HCPC-31014 Ornate Peacock Cling Stamp Set, HCPC-31018 Petite Feathery Florals Cling Stamp Set on White cardstock and color them using watercolors. Cut the images using the coordinating dies. Using dimensional tape, arrange and adhere the ready elements on the card front as shown.

Add the sentiment to the center of the arrangement and finally finish off the card by adding some Unicorn pearls.

Other Products: Ivory cardstock, dimensional adhesive, funnel tray, scissors, paper trimmer, scoring board, die cutting machine, unicorn pearls, watercolors, water color brushes

Instructions:

For this 9 1/2" x 4" card, take a piece of A4 white cardstock, cut to 8" x 9 1/2", score at 4" on the 8" side and fold in half. Cover with orange floral paper from the Feathery Florals Paper Collection.

Die cut a piece of Luxe Gold Cardstock using the largest die from the Slim Basic Rectangle Die Set, which is 9 ¼" x 3 ¾". Adhere to card. Die cut the second size down in orange paper from the paper collection. Adhere to card. Take the Slim Eyelet Die Set, die cut the second size down in Luxe Gold Cardstock. Adhere to card front. Cut a piece of orange paper from the Feathery Florals Paper Collection to 8" x 3 1/4". Adhere to card front.

Take the Slim Lattice Oval Die and die cut in white card. Die cut again in Luxe Gold Cardstock. Remove the white Decorative Oval Die from the center and stamp a Sentiment from the Just for You Cling Sentiments Stamp Set, in Ranger Archival Olive ink. Adhere the two Lattice die sets together, slightly offset, with Designer Dries Clear Adhesive.  Adhere the gold and Stamped Ovals.

Stamp one set of small Garden Lilies from the Garden Lily Cling Stamp Set, onto Vellum cardstock, in Versacolor white pigment ink. Add opaque white embossing powder and heat with a heat tool. Die cut with the matching dies. Color the centers with Olive ink using a Dauber. Pierce a hole in the middle with a tool from the Deluxe flower Shaping Kit and thread through three white Petite Pollen Stamens and one white Bead Stamen. Adhere to card with hot glue on either side of the sentiment. Stamp and color two sets of Lily Leaves from the Garden Lily Cling Stamp Set in Olive ink onto Deluxe Flower Shaping paper. Die cut with the matching dies and place in the Garden Lily Shaping Mold. Run through a die cutting machine and adhere to either side of Lilies

Stamp two sets of Floral Feathers from the Floral Feathers Cling Stamp Set onto Vellum cardstock in Versacolor white pigment ink. Add opaque white embossing powder and heat with a heat tool. Die cut with the matching dies. Adhere around the Vellum Lilies with hot glue. Sponge Dries Clear Adhesive over the Leaves, Feathers, and Lilies. Add clear glitter. All done.

Other Products: A4 white cardstock, scoreboard, white card, heat tool, hot glue, die cutting machine, clear glitter.

Instructions:

Card size is 4 1/4 x 5 1/2”. Score and fold 8 1/2 x 5 1/2” white cardstock at 4 1/4” on the long side to create a side fold card base. Cut the 4 x 5 1/4 panel from the Feathery Floral Paper Collection sheet 9A. Using the second largest Eyelet Oval & Basics Small Die, cut the oval from the center of the panel. Cut two pieces of green cardstock (Wild Wasabi used here.) 4 1/8 x 5 3/8” and adhere one to the inside of the card. Take the second one and adhere to the front of the card using dries clear adhesive. Center the panel with the cut-out oval on top of the green layer and use a pencil to mark the oval on the green panel. Place the same oval die on the pencil mark and run the card base with the green panel through the diecutting machine to cut an aperture in the card front. Using the largest and second largest ovals from the same die set, cut a frame from green cardstock. Ink the edges of the designer card front panel using Coastal Coral Archival ink and adhere over the green panel. Adhere the green frame around the oval aperture.

Stamp the image from the Petite Feathery Florals Cling Stamp set on white cardstock using Leaf Green Archival ink, color using Leaf Green and Coastal Coral inks. Stamp the same image using Tuxedo Black ink and color using Coastal Coral and Black Soot inks. Diecut both images using the coordinating die, lightly shape using the Deluxe Flower Shaping kit. Fussy cut just the butterfly from the Tuxedo Black image. Adhere the butterfly on top of the butterfly on the other image. Sponge the whole image with dries clear adhesive and sprinkle with Rajni Chawla’s Crystal Clear glitter. Adhere to the left side of the card using dimensional squares and glue.

Stamp the Clematis flowers on Deluxe Flower Shaping Paper using Coastal Coral Archival ink and color both sides of the flowers with the same ink. Diecut using the coordinating dies and shape in the 3D Clematis Shaping Mold. Pierce the centers using the Groove Golf Tool and insert Bridal Bouquet Stamens. Secure the stamens with hot glue. Sponge the flowers with dries clear adhesive and sprinkle with Crystal Clear glitter. Adhere the flowers to the Feathery Floral image using hot glue.

Stamp the ‘Sending you a hug’ sentiment from the Friendship Sentiments Cling Stamp set on white 4 x 51/4” cardstock using Wild Wasabi ink and adhere to the inside of the card. Be sure that it shows through the diecut oval front. Add a little sparkle to the card by randomly sponging with dries clear adhesive and sprinkling with Ultrafine Transparent Glitter.

Other Products: White Cardstock, Misti, Funnel Tray, Dimensional Squares, Hot Glue Gun, Wild Wasabi Cardstock, Wild Wasabi Ink, Distress Oxide Ink Smokey Slate.