Other Products: Adhesive backed foam, copic markers, white cardstock7300

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Create a 6 inch x 6 inch card base. Cut a 6 x 6” lavender panel from the Tender Moments Paper Collection, distress with Vibrant Violet and adhere to the card front. Cut out the medium doily from the Rounded Window Frame Die in white and adhere to the card front. Cut out a piece of lavender designer paper with the circle die in the Rounded Window Fame Die, distress with Vibrant Violet and adhere to adhesive backed foam and adhere to center of doily.

Stamp the koala, lamb and bunny from the Baby's Friends Cling Stamp Set and stamp the roses, word ‘Baby’ and ‘Welcome’ from the Welcome Baby Cling Stamp Set. Color with copics and cut out with corresponding dies, cut additional dies to give dimension to images, cut out the Welcome sentiment with the small arrow from the Arrows and Banner Die, as well as the next largest arrow in lavender designer paper, distress with Vibrant Violet. Adhere to card with foam tape, as pictured.

Stamp the flowers from the Small Wild Rose Cling Stamp Set in Buttercup and sponge with same, cut out with coordinating dies, sculpt with the Small 3D Wild Rose Shaping Mold, add glitter.

Stamp the leaves from the Classic Rose Cling Stamp Set in Bamboo Leaves and sponge with Bamboo Leaves, cut out with corresponding dies and sculpt with Rose Shaping mold.

Adhere roses and leaves as shown.

Other Products: Watercolor paper; Small foam dots; Die cut Machine

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

For more ideas on creating with the Decorative Royale Square & Circle Dies, watch the tutorial at https://youtu.be/tqmtn_TiVVw.

For more tips on creating with the Window Scene cards & dies, watch the tutorial at https://youtu.be/LnM95GR92ao.

Instructions: With the Flower shaping paper make a card base 6 x 6”. Top with a piece of the Tender Moments paper slightly smaller. Die cut the largest die from the Rounded Eyelet Window die from the Flower Shaping Paper. Use the 1/2 moon die from the rounded Sunlight Window die and cut the center out. With more of the paper die cut 2 of the 2nd die from the Rounded Scallop Window set. Add small foam dots to the back and adhere to the card. Use the plain circle from the courtyard Elegance set and cut out the circle from some of the Tender Moment’s paper, add foam dots to the back and adhere to the card as shown. Die cut the center out of some of the Flower Shaping paper, add adhesive and glitter, adhere to the circle. Die cut the square out, add foam dots and adhere to the center of the card.

Stamp the word Congratulations on the flower shaping paper with the Leaf Green ink, cut out using the 1A die from Cut Mat Create set, adhere to the center of the square.

Stamp the 2 flowers on the watercolor paper with the black ink and color with the Zig Markers, cut out with the coordinating die, add foam dots and adhere to the card. To finish add glitter to the flower and Crystal Drops to the inner circle.

Other Products: White cardstock, die cutting machine, funnel tray, scissors, paper trimmer, dimensional adhesive, Wisteria glitter

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

For more ideas on creating with the 5 x 7 Decorative Frame Dies, watch the tutorial at https://youtu.be/qdBFA5VpmSo.

Instructions: Click here to view a photo of the inside of this card. Cut white cardstock to 7 1/2 x 10”, score and fold at 5”. Diecut card base using the Decorative Circle Frame outline die, making sure the die is just past the fold, as to keep the fold intact. Diecut paper from paper collection using same die and adhere onto card base. Using white cardstock, diecut Decorative Circle Frame die along with the second largest circle die from the Circles Basics Large die to create a frame. Apply glue onto sponge, and randomly dab glue on diecut, then sprinkle with Rajni Chawla’s Crystal Clear. Lay this decorative piece onto card base and trace around the circle as to mark where you’ll be cutting and remove diecut. Now use the same circle die and diecut the opened card front then adhere decorative piece onto card base using foam adhesive and Dries Clear glue. Using Lulu Lavender, stamp sentiment on inside of card base.

Stamp fawn, koala and assorted florals onto white cardstock using Espresso Truffle ink, diecut. Color fawn using Desert Sand, Potter’s Clay. Color koala using Tuxedo Black ink. Use Fantastix to apply Lulu Lavender to animals’ ears and cheeks, and New Sprout, Lulu Lavender and Teal Zeal to their foliage and florals. Color assorted floral images with Cantaloupe and Lulu Lavender onto flowers and New Sprout and Bamboo Leaves onto leaves. Shape images using Deluxe Flower Shaping Kit.

Arrange florals to create a ring around die cut, cutting and layering as desired. Adhere onto card using foam adhesive and Dries Clear Glue. Then arrange animals as shown, adhering with foam adhesive. Finally add glue onto images and sentiment as desired and sprinkle Wisteria glitter, tap off and allow to dry.

Other Products: White cardstock, dimensional adhesive, paper trimmer, scissors, tidy tray, die cutting machine

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

Instructions: To get started on this shaker style card, cut white cardstock to 8 x 6 1/2" size, score and fold at 4". Take the balloon die from HCD1-7299 Baby's Air Balloon Die and place onto the cardstock, leaving the left edge of die extended over the folded side of card. Send through die cutting machine and you have a shaped card base! Now stamp the HCPC-3914 Baby's Air Balloon Cling Stamp Set in Vibrant Fuchsia ink onto white cardstock. Stamp the word ‘welcome’ in the banner at the bottom of air balloon basket. Diecut the air balloon with the coordinating die. Use from the HCD1-7155 Circle Basics Large Die to diecut the 3rd largest circle from center of air balloon. Cut the largest circle die out of clear cardstock and attach behind the air balloon circle opening.

Stamp the word ‘Baby Girl’ in the Vibrant Fuchsia ink onto white cardstock and diecut with the coordinating die. Stamp the baby piglet, bunny, and fawn from HCPC-3916 Baby's Friends Cling Stamp Set onto white cardstock in Jet Black ink and diecut with the coordinating dies. Stamp the small rose image 2x on white cardstock with a combination of Vibrant Fuchsia and Leaf Green ink and diecut with the coordinating die.

Use a combination of daubers and markers with blender to color the images. For the baby bunny, sponge lightly with the Sky Blue ink. Also use the Light Pink for a blush of color, plus Pale Green, Pale Pink and Light Gray markers. For the fawn, sponge with the Desert Sand. Use the Light Pink marker for a blush of color, plus Light Green and Cobalt Blue on the florals. For the piglet, use the Light Carmine, Light Pink and Light Green and Cobalt Blue on the florals. Trim off body of piglet, you will only need the piglet’s head. Sponge the small roses with Vibrant Fuchsia and Leaf Green inks. Use the Light Carmine marker on the details of the ‘Baby Girl’ letters.

Use the stylus from the Deluxe Flower shaping kit to shape the baby animals and tiny roses. Now attach the ‘Baby Girl’ letters onto the card base so that they will show through the circle opening of air balloon. Attach a small rose and piglet’s head as pictured. Use Dries Clear Glue to add a sparkle of glitter. Attach a layer of dimensional adhesive around the backside of air balloon circle, making sure it’s sealed completely to contain shaker elements. Carefully drop some pink prills onto the shaker area. Attach dimensional adhesive onto the rest of air balloon as well and layer onto shaped card base.

Attach the bunny and fawn onto the card as pictured. Use the Dries Clear glue along with Crystal glitter to add a touch of sparkle over the card as desired.

Other Products: Copic pens-BV000, RV02, N2, Green and pink sparkle gelly roll pens, Pearl mist cosmic shimmer spray, white stamping card, 6” square card base

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

Instructions: Cut a square of paper from the paper collection and adhere to the card base.

Die cut the heart of joy die using paper from the collection and adhere approximately .5” from the top of the card base.

Stamp “BABY” onto the flower shaping paper using black memento ink, die cut and shade using the pink inks. Die cut 3 further “baby” shapes and layer these on top of each other to create a firm shape then adhere to the card over the heart of joy die cut to the right side of the card.

Make the leaves: stamp onto the flower shaping paper using bamboo leaves ink and spray with cosmic shimmer on the front and reverse. When dry die cut and place into the shaping mold face down, spritz with water and run through the die cutting machine to shape.

Make the animals: stamp using black stazon ink and colour using a mix of water colour pens, copics and gel pens. Die cut and shape using the flower shaping tools.

Make the flowers: Stamp onto deluxe flower shaping paper using toffee crunch ink and die cut. Edge with pink peony then with vibrant fuchsia. Shape using the flower shaping tools and layer together to form the roses.

Position the flowers, leaves and animals and secure using hot glue.

Add a little dries clear glue to the flowers and sprinkle with transparent glitter, remove excess and allow to dry.

Other Products: Die cut machine, scissors, scoreboard, versafine smokey grey, heat gun, clear embossing powder, foam pads, acetate, gel pen white, black, pink, green, red, acetate, double sided adhesive, 3D foam strip, glitter, bows, twine, wobbler, thin red liner tape

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

Instructions: Click here to see a video of this project: https://photos.app.goo.gl/AhNpKFkQeyAJdNMJA. Trim a piece of pattered paper to 10 x 10”. Score 1/2, 1, 1 1/2, 2 on all four sides the full length. On two opposite sides score at 2 1/2” for 1” (down to the 2nd score line). With scissors, cut straight down this score line (2 score lines) then outward diagonal one score line then straight the last score line. Repeat for the opposite side. On the other two sides cut along the internal score line down to 2” this cut will meet the previous cut. Repeat on the opposite side. Cut two 6 x 6” matching panels of Baby’s Friends and adhere one panel within the score lines. Put the other 6 x 6” panel to one side. On the straight sides, place adhesive on the 1/2” score line to create the side of the frame. Repeat on the opposite side, you have now completed two sides of the shadow box frame. Do likewise with the remaining sides but also add adhesive where the mitre corner sits on the existing shadow box frame side. Ink the edges with Archival Pink Peony. Cut out the centre image of the other Baby’s Friends panel using Cut Mat Create 2A and ink the edges in Archival Violet. Adhere acetate behind the cut-out panel and add 3D foam strip to acetate. Place glitter onto the shadow box panel keeping the glitter to the centre. Remove the 3D foam strip release paper and sit over the glitter and line up with the panel frame. Mount the shadow box frame onto a 6 x 6” tent card blank.

Stamp out in versafine smokey grey and clear heat emboss Baby’s Friends, Welcome Baby, Baby’s Air Balloon and basket banner. Colour with Zig Clean Color Real Brush Markers and die-cut with coordinating dies. Use gel pens to colour the cheeks and bouquets. Stamp out ‘Baby Girl’ on the basket banner and adhere to the balloon basket with foam pads. Adhere twine to the balloon with red liner tape and hot glue the ribbons onto the twine and basket banner. To keep twine in place behind Baby’s Friend, cut again in white cardstock and sandwich the twine between image and white cardstock die-cut.

Decorate the shadow box frame with Welcome Baby flowers and Baby’s Friends, add dimension with foam pads or wobblers.

Other Products: Die-cutting machine, Score Board, Smooth White Cardstock, Glue dots, Foam Tape, Distress Oxides: Worn Lipstick and Peeled Paint, Hero Arts White Pigment Ink and White Heat Embossing Powder.

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

Instructions: Create a top fold card from a smooth white cardstock, measuring 6" by 8". Choose the paper from the designer paper collection and cut it 1/16" smaller on all sides to the card panel and glue it on the card front.

Cut all the required die cuts using Majestic Swirl Frames Die and assemble them as shown.

Stamp all the required images for the card from Welcome Baby Cling Stamp Set, and Baby's Friends Cling Stamp Set and stamp them with black archival ink on smooth white cardstock. Paint the images with Zig Clean Clear Brush Markers and cut them all using their coordinating dies.

Stamp all the required images from Small Wild Rose, Large Wild Rose, Lush Lilac and Leafy Accent Stamp sets on Vellum cardstock using Hero Arts white pigment ink, sprinkle white heat embossing powder and dust extra. Next, heat set the images and cut them using their coordinating dies. Color the Roses using Worn Lipstick, Leaves using Peeled Paint and Lush Lilacs using Rusty Hinge distress oxides. Shape the roses in their coordinating molds, and foliage and Lilacs using needle tool. Add prills to the flower centers.

Form a small bouquet of flowers and assemble the card as shown. Add a little sparkle to the flowers using Rajni Chawla’s Frosting Powder.

Other Products: Versafine Black Onyx ink, white cardstock, Iris cardstock, Fun Foam,

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

Instructions: Cut a piece of white cardstock 12” x 4 1/2", score at 6” along the long side and fold. Die cut the shape using the outer die from the HCD1-7299 Baby’s Hot Air Balloon Die set with the top edge hanging over the fold. Die cut a piece of patterned paper using the shaped die and adhere to the front of the card.

Stamp the image from the HCPC-3914 Baby’s Hot Air Balloon Stamp set in Black Onyx ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating outer and inner die. Add Ultrafine Crystal glitter to the hearts and the zig zag pattern and the stripes with Dries Clear glue. Adhere to the front of the card with Fun Foam.

Stamp the baby animal images from the HCPC-3916 Baby’s Friend Stamp set in Black Onyx ink on Iris cardstock. Colour with Zig Clean Colour Brush markers and die cut with the coordinating dies. Add Ultrafine glitter to the flowers with Dries Clear glue and then adhere in the balloon as shown.

Stamp the rose images from the HCPC-3915 Welcome Baby Stamp set in Black Onyx ink on Iris cardstock. Colour with Zig Clean Colour Brush markers and die cut with the coordinating die. Add Crystal Clear glitter with Dries Clear glitter on a dry sponge. Adhere to the top left of the balloon as shown and the rose swirl to the bottom right of the balloon as shown.

Stamp another hot air balloon from the HCPC-3914 Baby’s Hot Air Balloon Stamp set in Black Onyx ink on Iris cardstock. Stamp the sentiment from the HCPC-3914 Baby’s Hot Air Balloon Stamp set in Black Onyx ink. Colour with Zig Clean Colour Brush markers and die cut the small banner with the coordinating die. Adhere to the basket as shown.

Other Products: Ribbon, White Cardstock

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

Instructions: Cut white card base and fold with dimensions of 7 1/4" x 5 1/4". Die cut a rectangle using Eyelet Rectangle & Basics Die HCD2-7189 with approximate dimensions of 7" x 5" from Tea Time Paper Collection. Next, cut a rectangle using Eyelet Rectangle & Basics Die HCD2-7189 with approximate dimensions of 6.75" x 4.75" from paper Collection.

From the white paper, cut the second frame with the Decorative Circle Frames Die. Cover with Glue and Brocade Chawla's Crystal Clear and glue on the base. From the white paper, cut the second frame with the Decorative Circle Frames Die die. Cover with Glue and Brocade Chawla's Crystal Clear. From the Paper Collection, cut out with the die from the HCD1-7283 Courtyard Elegance Die circle set and glue to the base. Cut a smaller frame from white paper with the Rounded Window Frame Die. Cover with Rajni Chawla's Crystal Clear glue.

Stamp Leafy Accents leaves on the Deluxe Flower Shaping paper with Ranger Archival Ink Pad - Fern Green ink, die cut with the coordinating die, shade using this same ink. Shape leaves using 3D Leafy Accents Shaping Mold.

To create flowers, stamp the Small Wild Rose and Large Wild Rose on the Deluxe Flower Shaping paper a few times using Archival Ink-Carnation Red and die cut using the coordinating dies. Shape using HCFB1-487 Large 3D Wild Rose Shaping Mold and HCFB1-486 Small 3D Wild Rose Shaping Mold. Pull through pink stamens from Pastel Pearl-Small and one yellow from Rose Hip Stamens-Large. Arrange the leaves and flowers on card and glue everything with hot glue as shown.

Stamp images from the HCPC-3915 Welcome Baby and HCPC-3916 Baby's Friends, die cut using the coordinating dies. Color with watercolors.

Glue everything as pictured, add a ribbon.

Other Products: Inks: Ecocline Brush Pens- 738 Cold Grey Light, 666 Pastel Green, 226 Pastel Yellow, 579 Pastel Violet, 579 Pastel Rose, Spectrum Noir Harmony Inks- Winter Rose. Other: Diamond stickles, White; card stock, Hot glue gun, Fussy cutting scissors, scissors Double sided tape, 3D foam double sided tape, Wooden cocktail prick or tooth pick, inking tool, scor-pal, Yellow bling Ryne stones, Card (e.g. cereal box), Crop-a-dile

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: This card measures 6 1/4” x 8 1/4” when finished. Taking the white cardstock and make a hinged tent fold card to the above measurements. Taking the paper sheet 6B from the paper collection and cut this a little smaller than the card base. This will be your card front. Taking the Winter Rose ink and a inking tool, bring color to the card base edges and the paper card front. Adhere the card front to the card base.

Taking the white card stock and the stamps and dies used for this card, make the embellishments. The embellishing list: 1x the air balloon, 4x the air balloon cut from card, x4 the sentiment tag from the air balloon from card, x1 the sentiment tag cut from the basket, x1 the sentiment as a banner (congratulations), x14 smaller flower (makes 7 flowers), x2 side flower cluster with the swirl, x6 smallest rose, x2 piglets-closed eyes, x1 piglet with open eyes. Once all elements are coloured with the inks and pens bring shape to the flowers using the flower shaping mold. The flowers are made using 2 petal layers for each bloom. Adhere the bling crystals to the centre of the flowers then apply a little diamond stickles to the flower centers. Make the banner by cutting to fit the sentiment leaving space so you can make 2 holes to slot the cocktail pricker in to them. Apply a little green ink to color the wood.

Adhere the air balloon together. Trim the basket away from the balloon there will be room to adhere all the embellishments to the basket. Adhere the air balloon to the card front then the basket, making sure you leave enough room for the flowers and piglets. Arrange and adhere the flowers across the basket edge then the piglets. Tuck and adhere the small roses and trimmed leaves between the lager flowers. Adhere the Baby Girl sentiment to the basket. Adhere the 4 flowers across the air balloon then adhere the small roses on both ends. Adhere the banner sentiment behind the left piglet. Apply the diamond stickles to the sentiment and the small flowers to highlight them.

Other Products: White cardstock, Big Shot Machine.

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: Card size 5” x 7”. Take pattern paper from the collection and adhere it on card base. Cut Die from Elaborate Oval Frames Die Set on white cardstock and adhere it with foam tape. Cut another layer with pattern paper from the collection, distress the edges and adhere it with foam tape. Then another layer on white cardstock and adhere it with foam tape. Add sentiment from welcome baby cling stamp set using Vibrant fuchsia.

Stamp some leaf branch images from Cascading Wisteria Cling Stamp Set on white cardstock using archival ink- library green and cut them with coordinating die and color them using archival ink-leaf green shape them using groove groove golf tool set. Stamp some wild rose flowers from Small Wild Rose Cling Stamp Set on Deluxe Flower Shaping Paper using archival ink-vibrant fuchsia and cut them with coordinating die. Color them with rose madder, vibrant fuchsia and buttercup and shape them using Small 3D Wild Rose Shaping Mold. Add stamens. Add crystal clear glitter to these flowers. Make arrangement of the flowers and leaves as shown.

Stamp Flower images from Welcome Baby Cling Stamp set on white cardstock using archival ink-vibrant fuchsia, add glitter and adhere them with foam tape. Stamp images from Baby’s Friends Cling Stamp set and Welcome Baby Cling Stamp Set using archival ink-jet black, cut them with coordinating die and color them using Zig Clean Color Real Brush Markers using Color In Watercolor Brush-Fine. Add Crystal Clear Glitter. Adhere foam tape.

Other Products: Die cutting machine Cut’n’boss, heatgun, water mister, hot glue gun, hot glue, scissors, watercolor paper, memento summer sky, rose bud, new sprout and dandelion, stickles yellow, lime green, waterfall, thistle

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

For more tips on creating with the Floral Fashionista collection, watch the tutorial at https://youtu.be/9V6JOqdQtC8.

Instructions: The finished card measure 6 inches by 5 inches. Cut the card base in white card stock to 10 inches by 6 inches and score at 5 inches on the longer side. Fold to make a side folding card. Cut a 4 3/4 x 5 3/4” piece of pattern paper from the Tender Moment Collection (#9B) and glue it to the card base. Then cut out another piece of pattern paper 4 1/4 x 5 1/4 (paper 3B) and glue it over the base with 3D foam to give dimension to your card. Do it again with a another 3 3/4 x 4 3/4 paper (paper 9B again).

Take a watercolor paper and cut it with a square scallop die from Eyelet Rectangles & Basics Die. Take a piece of plastic (sandwich bag, etc). Put some ink on it, randomly. Add water with a spray bottle and put your plastic randomly on your watercolor paper. Dry with a heat gun and do it again with another color. I use 4 colors: memento summer sky, rose bud, new sprout and dandelion. Glue it in the center of the card.

Stamp on a white cardstock animal and title of your choice from the tender moment collection with the archival ink jet black. Color with zig-clean-color-real-brush-markers (I used peach pink, pale pink, light green, light violet). Cut with the coordinating die. Glue your animal with 3D foam to give dimension. For the title, cut 5 more pieces in white cardstock and glue everything together to make a chipboard. Add 3D crystal lacquer on it to give a nice glossy look. Glue on your card when dry.

Stamp little flowers from floral fashionista using different ink onto flower shaping paper, colour the centre with the same color. Colour the reverse of the flowers and diecut with the coordinating die. Place facedown into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give futher shape with Deluxe flower shaping kit tools. Poke a hole in the centre of the flowers and add stamens, secure with hot glue.

Add one flower close to you animal and make a little bouquet at the right of your title. Add bloom spray from Wild aster collection (stamp in green). Add a little bit of stickles and pink color on the bloom spray.

Other Products: White cardstock, foam tape, cloud embossing folder, blue cardstock, London Fog, white pigment ink pad, Copic Markers: YG11, YG41, G12, B00, B01, B41, B21, C1, C2, C3, E53, E51, E21, Y11, Y15, RV00, RV10,

video: For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

Instructions: Card size: 6 x 6”. Fold 6 x 12” white cardstock to make a 6 x 6 “card base. Cut a medium blue square with the eyelet edge of the Stairway Gardens Die and layer onto white base. Cut a 5 5/8 x 5 5/8” light blue panel and run it through a cloud embossing folder (it may need to be run through 1 side at a time which is ok since the entire center is covered). Cut 4 corners out of medium blue. Brush raised clouds with white pigment ink and heat to dry. Glue corners to the embossed layer.

Stamp roses, balloon, deer and elephant using London Fog. Stamp basket part of balloon again the stamp Baby Boy using Sky Blue and die cut. Color all stamped images. Pop up balloon, pop up elephant and deer. Pop up the roses on each side of the balloon basket. Glue the “Baby Boy” sign on the basket. Glitter the card, balloon and flowers.

Other Products: Scoring board, die cutting machine, white card stock, yellow card stock

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

Instructions: Make a 7 inches by 5 inches top folding card base from white card stock. Add a mat layer a little smaller than card base from the yellow card stock and adhere to card front. Cut a mat die cut from Royal Elegance frame die set in pattern paper. Remove the inner rectangle to create a frame.

Cut a scene from pattern paper 4 inches by 6 inches and adhere to the centre of card. Apply double foam tape at the back of decorative frame and adhere to the card front on the card panel. Cut two pieces of the inner decorative die from Royal elegance set and adhere them together. Add a pattern paper at its back. Adhere the whole panel on the right of the card.

Stamp the rose flowers from classic rose collection in Garden patina ink on the deluxe flower shaping paper. Stamp the rose vines. Colour using the archival colours and zig markers. Make leaves from Large wild rose collection. Shape the flowers with groove golf tools and add stamens. Add glitter to flowers and leaves using clear glue.

Stamp the balloon and animals in black, colour and die cut using the coordinating dies. Stamp the welcome sentiment on the basket. Stamp the baby die cut in garden patina ink and colour using same colour. Add glitter and add to the card.

Other Products: London Fog Memento Ink, Distress Crackle Paint, Squeezed Lemonade and Spun Sugar Distress Ink, Hot Blue Gun, White Cardstock, Canson Watercolor Paper, Teal Cardstock, Zig Clean Color Markers #041 Light Green and #081 Light Violet

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

Instructions: My card is 5 x 7”. Make card base and cover with a piece of the paper from the collection. Stamp the little sheep and the rabbit onto watercolor paper using London Fog Memento Ink. Use the water brush and Distress ink to color the little images. Once colored, set aside to dry and then using the coordinating die cut out the images. Add some 85 glitter to the images and set aside to dry.

Cut out circle frames using the circle dies and also cut a piece of the paper collection to fit the back of the frames. Glue the images into the circles and allow to dry. Cut out two of the dies from the Butterfly Kisses dies and glue the circle frames to these. Using the Double Dots, adhere to the top of the card.

Cut two pieces of the Sweetheart Borders Dies and a 3/4” piece of the paper collection and glue these together making a lovely lacy border for the bottom of the card. Stamp sentiment onto a piece of the paper collection and then cut out using the ovals dies. Next cut a frame out of cardstock using the oval dies. Glue the sentiment piece behind the oval frame and using Double Dots, adhere over the lace piece.

Stamp the flowers using Elderberry Memento Ink, color the flowers using Lilac Posies Memento Ink. Cut out the flowers using coordinating dies. Lay flower petals onto the mold, spritz with water and cover with the top piece of the mold and run this through the die cutting machine. Lay them out to dry. I use the Deluxe Flower Shaping kit to push down on the center of the flowers giving the extra added dimension. Apply Prills to the center of the flowers and allow to dry. I add the Distress Crackle Paint to the edges of the flowers and add the Crystal Clear glitter. Again, allow the flowers to dry. I used hot glue to adhere to the front of the card.

Other Products: White Card, Lime Yellow Cardstock, Distress Ink Hickory Smoke, Tumbled Glass, Versamark Embossing Ink, White Embossing Powder, Hot Glue Gun, Glitter Dust, pearl beads.

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

Instructions: For the card base trim White Cardstock measuring 22” by 7”. Score lines first 5” next again 5”, 4”, 4” and last 2”. And fold it like stairs from scoring lines.

Trim three panels from Tender Moments paper collection sheet # 3A measuring 6.8” by 4.8” second 3.8 by 6.8” and last panel 1.8” by 6.8” and adhere on card front panels using clear glue.

Stamp air balloon with Archival Viridian ink and cut it using coordinating die, color using zig markers. Stamp other images with Distress Hickory Smoke on white cardstock, and color with distress and Archival Ink using daubers cut it with coordinating dies. Stamp the flowers on lime yellow cardstock using versamark embossing ink, cover with white embossing ink, heat using heat tool and cut all flowers using coordinating dies. Shape the flowers using shaping mold and make a few flowers. Apply clear glue on all images including flowers and embellish with glitter dust.

Cut a frame using Elaborate Oval Frame Die on paper from paper collection and other on white and stack together using clear glue. Trim picture and place inside the frame and adhere ready frame on the middle stair step using 3d Foam.

Arrange all ready elements as shown and embellish with Nuvo Drops and pearl beads.

Other Products: Mowed Lawn, Worn Lipstick, Salty Ocean, Vintage Photo, Walnut Stain and Black Soot Distress inks, Versafine Onyx Black ink, Ranger black embossing powder, watercolor cardstock, paint brush, oval makeup brush and Sakura Gelly roll white gel pen.

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

Instructions: Die cut 5 pieces of white cardstock using the dies from Cut Mat Create 1A Die and Cut Mat Create 2B Die. Stamp the sentiment from Special Birthday Sentiments Cling Stamp Set on the square die cut with Versafine Onyx Black ink and heat emboss using Ranger black embossing powder and Heat It Craft Tool. Ink all the die cut pieces with Mowed Lawn and Salty Ocean distress inks as shown. Adhere them on a piece of 4 1/4" x 5 1/2" white card base as shown.

Stamp the images from Baby's Friends Cling Stamp Set, Woodsy Wonderland Cling Stamp Set, Sweet Shoppe Cling Stamp Set and Elements of Home Cling Stamp Set on watercolor cardstock and die cut with matching dies from Woodsy Wonderland Die, Sweet Shoppe Treats Die and Elements of Home Die. Die cut few more pieces for all the die cuts from white cardstock using the same dies, stack and adhere all the similar die cuts together to make thicker pieces of varying thickness. Here I have used single piece for fence, 2 pieces for banner and 4 pieces for rest on the images.

Color all the images using Mowed Lawn, Worn Lipstick, Salty Ocean, Vintage Photo, Walnut Stain and Black Soot Distress inks and Zig Clean Color Real Brush Markers. Apply a layer of Designer Dries Clear Adhesive to the cupcake frosting, flames, parts of butterfly and the banner. Sprinkle transparent glitter on the glue and let it dry. Once dry burnish the glitter with fingertips. Arrange and adhere all the pieces on the card front as shown. Add tiny drops of Ebony Black Nuvo Crystal Drops to the eyes and 3-D Crystal Lacquer to the parts of cupcake, nose of the bunny and fawn to add finishing touch.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, Versa Color ink 20 Turquoise, 186 Laurent Leaf, 15 Magenta, Distress Ink Peeled paint, Promarkers, cristals

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Click here to view another photo of this project. Cut a piece of white cardstock 11 x 5.5", score at 5 1/2” and 8 1/4” along the long side and fold to create an easel card. Cut a piece of white cardstock 5.5 x 5.5" and attach it to the front panel. Cut two pieces of blue patterned paper from the Tender Moments paper to 2 3/4 x 5 1/4" size. Cut a piece of blue patterned paper from the Tender Moments paper to 2 3/4 x 5 1/4" size. Attach all pieces onto the cardstock panels as shown. Cut out a 4 3/4" circle of the white cardstock and 4 1/2" circle from the Tender Moments paper. Use dimensional adhesive to attach it in the center of the top panel.

Stamp the pig and the elephant from Baby`s Friends Cling Stamp Set in Jet Black ink onto Deluxe Flower Shaping paper and diecut with coordinating die. Stamp inscriptions from Welcome Baby Cling Stamp Set in Jet Black ink onto same cardstock and diecut with coordinating die. Stamp blossoms from Oakberry Lane Blossoms Cling Stamp Set in Turquoise ink onto same cardstock and diecut with coordinating die. To make this card you`ll need 3 large blossoms, 4 medium blossoms and 9 small blossoms. You`ll also need 3 branches from Leafy Accents Cling Stamp Set and 7 leaves from Oakberry Lane Blossoms. Stamp them in Leaf Green ink and cut out with coordinating dies. Use the Stack and Store daubers to color all flowers and leaves. For flowers use Laurent Leaf and Magenta ink, for leaves use Distress Ink Peeled paint and Leaf Green ink. For animals and inscriptions use markers or watercolor pencils. Shape the flowers and leaves using their coordinating shaping molds. Use the Deluxe Flower Shaping stylus to add more dimension to blossom. Take some white small rock candy stamens and ink their ends with Magenta ink. Thread stamens through the centers of blossoms and attach with hot glue, trimming off the excess string. Use dimensional adhesive and hot glue to attach animals, inscriptions, blossoms and leaves onto card as pictured.

To add that extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers and stamped inscriptions.

Decorate card with a few small self-adhesive crystals.

Other Products: Cardstock- White and Navy, Waterbrush, Buttons, Spiegelmom Scraps Sequins (Winter's Mist), Thickers, Scrapbook Adhesives by 3L (Crafty Foam Tape, Thin 3D Foam Squares, 3D Foam Squares, Adhesive Dots Small, Adhesive Dots Micro, E-Z Runner Ultra)

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

Instructions: Click here to view a larger photo of this layout. Keep the light blue patterned paper with the yellow stars as 12 x 12”. Cut a piece of white cardstock that is 11 x 11”, and the blue patterned paper that is 10.75 x 10.75”. Adhere these layers together. Using the Diamond Eyelet dies, cut each size from white cardstock. Using the teal and green patterned paper cut 1 of each of the plain Diamond dies. Adhere the patterned pieces to the eyelet pieces. Adhere the diamonds across the layout using foam squares. Cut the photo to fit inside the eyelet rectangle die, this is cut from white cardstock. Mat this in navy cardstock. Adhere to the left hand side of the layout using foam squares. Find and cut out the “Baby Boy”, flag one end and mat in navy cardstock. Cut out the small blue journal block. Add these to the top right hand corner under the beginning of the title created from letter stickers. Find and die cut out the round green mini tag and the light blue mini tag. Add to the left hand side of the matted photo.

Stamp and die cut 1 of each of these animals onto white cardstock using Jet Black Staz On Ink: Bunny, Elephant, Lamb and Raccoon. Add color to the images using Zig Clean Color Markers and a waterbrush. Lamb/Elephant- Mid Grey, Light Carmine, Bunny- Light Carmine, Raccoon- Grey, Koala- Grey, Mid Grey, Light Carmine. Animal Flowers- Pale Green, Yellow, Light Violet.

Add the raccoon to the title area in the top right hand corner. Add the other animals to the middle of the larger diamonds. Add buttons and sequins around the layout.

Other Products: Watercolor Paper, Smooth white cardstock, organza ribbon, foam tape,

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

Instructions: Ready side fold card measures 6” × 8”. First, cut a piece of designer paper measures 5.75” × 7.75”, mat it on white cardstock of similar size. Place a rectangle die on card mat and cut, make sure to cut only 3 sides. Fold the side which we didn’t cut also fold it into half. Cut a piece of white card measuring 4.5” × 6.5”. Mat a piece of designer paper on it which is 1/8 of an inch smaller from all sides. Glue it from the back side of card panel to create a pull tab. Mat this card panel on ready card base using foam tape. Further, cut a frame from white cardstock using Intricate Swirl Frames die trim one edge and mat it on card using foam dots. Take a piece of neenah solar white cardstock measuring 5.5” × 3.75”. Make cloud effect on it using distress ink and stencil. Mat it on frame as shown.

Stamp hot air balloon and baby’s friends images on watercolor paper using black archival and cut with coordinating dies. Paint images using zig markers. Arrange images on card using foam dots as shown. Cut a decorative tag using Ornamental Tags die from white cardstock and designer paper. Glue it on card using foam dots. Stamp Baby sentiment using black archival on white cardstock and paint with zig markers. Cut with coordinating die and glue it on card. Stamp congratulations sentiment on designer paper and cut with arrow and banner die and glue it on hot air balloon. For finished look apply glitter using clear dry adhesive.

Other Products: White cardstock, paper trimmer, die cutting machine, Wisteria glitter, foam adhesive and foam adhesive strips

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

For more ideas on creating with the 5 x 7 Decorative Frame Dies, watch the tutorial at https://youtu.be/qdBFA5VpmSo.

Instructions: Cut white cardstock to 7 1/2 x 10”. Score and fold at 5”. Diecut card base using the Elaborate ovals outline die, place the die slightly above the fold line, as to leave the fold intact. Diecut paper from paper collection using same die and adhere onto card base. From white cardstock, diecut the decorative Elaborate Ovals. Apply glue onto sponge, and randomly dab glue on diecut, sprinkle with Rajni Chawla’s Crystal Clear and tap off. Adhere this onto card base.

Stamp Hot Air Balloon x2, piglet and koala onto white cardstock using Espresso Truffle ink and die cut. Color the balloons with Teal Zeal, Cantaloupe, New Sprout, and Lulu Lavender then the basket with Desert Sand and Potter’s Clay. On each hot air balloon, diecut a circle, one slightly smaller than the other. On the balloon with the smaller circle, also diecut the small banner in the basket, then adhere clear cardstock on the back of the circle opening, trim clear cardstock if needed. Take the largest round circle piece and apply glitter as desired. Once dry, apply a continuous strip of foam adhesive all the way around the top outside of the circle, insert a small amount of prills, then align and adhere the hot air balloon with the clear cardstock on top of this. Adhere the hot air balloon with the larger opening on top of this shaker with foam adhesive, allow a space on either side for a banner to slide through. Take the small banner diecut from basket, stamp the sentiment in Teal Zeal ink, then color with same ink, and adhere onto basket with foam adhesive.

On white cardstock stamp Congratulations with Teal Zeal ink, and diecut with banner from Arrows and Banners Die set. Ink edges using dauber and Cantaloupe ink. Give the banner a slight shape by wrapping around stylus handle. Insert banner beneath the top balloon layer and adhere. Use Fantastix to add color in the smaller details of piglet and koala bear. Add Desert Sand to cheeks, hooves, and snout of piglet. Then use dauber to color rest of piglet with Lulu Lavender. On koala, add Lulu Lavender with Fantastix onto cheeks, and ears, then use dauber to add a soft touch of Tuxedo Black onto rest of koala bear. Finally use Fantastix to add New Sprout and Teal Zeal onto foliage and florals on animals. Tuck animals in basket as shown and adhere. Add Wisteria glitter onto card as desired, allow to dry.

Other Products: Foam tape, White cardstock.

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

Instructions: Create a card base of size 5 by 6 1/2”. Mat the card base with pattern papers from the Tender Moments paper collection.

Stamp the images from the welcome baby cling stamp set with archival black, stamp the air balloon from the Baby's air balloon cling stamp set with versamark and heat emboss in gold. Color the stamped images with alcohol markers and cut them with their coordinating dies.

Stamp the flowers from the classic rose cling stamp set on vellum with versamark and heat emboss in white. Color the flowers with memento sky blue and nautical blue. Stamp the leaves from the leafy accents cling stamp set with archival fern green and color using memento bamboo leaves and olive green. Cut the flowers and leaves using their coordinating dies and shape them using the coordinating 3d shaping mold.

Arrange everything as shown. Lastly, add a sentiment from the paper collection and dust the flowers with crystal clear glitter powder.

Other Products: Martha Stewart scoreboard, white pearl cardstock, glue stick gun

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

For more tips on creating with the foam paper & stamens, watch the tutorial at https://youtu.be/Oma6ctVmUD0.

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: Create card base take A4 white paper and fold in half, take Elaborate Oval Frames Die and cut carefully on folded edge. Diecut again from paper collection and glue it to the base of card.

Take a piece of white paper and cut decorative frame from Elaborate Oval Frames Die, place onto card using Darice Adhesive Foam Strips. Cut from Tender Moments Paper Collection middle part using Elaborate Oval Frames Die and place onto card using Darice Adhesive Foam Strips for dimension.

Stamp the Large Wild Rose Cling Stamp Set on foam paper with Ranger Archival Ink Pad - Manganese Blue and cut using the coordinating dies. Colour with Ranger Archival Ink Pad - Manganese Blue. You will need 2 petals for each flower to create flowers. Use an iron or heat gun to heat the petals and when they start to shrink move them on the Molding Mat and press on the middle using shaping tool - using large one. Layer the petals together using the hot glue gun making sure to offset them and use a paper piercer to make a hole in the middle and pull through the stamens. Add a little hot glue to the underside of the flower to adhere (watch tutorial). Sponge the petals with dries clear adhesive and sprinkle with Crystal Ultrafine Transparent Glitter and Rajni Chawla's Crystal Clear glitter

Stamp the leaves using Large Wild Rose Cling Stamp Set on the white paper with Memento Dye Ink Pad - Bamboo Leaves, cut out with the coordinating die, shade use this same ink and shape. Shape leaves using Mold as shown on the video. Adhere the flowers and leaves to card using a hot glue gun.

Stamp Congratulation sentiment using Welcome Baby Cling Stamp Set with Welcome Baby Cling Stamp Set. Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

Other Products: Watercolor paint green, blue, yellow, glue, 3d squares, blue marker

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

Instructions: Create a double white card base 4 3/4 x 5 3/4 ". Cut out a slightly smaller rectangle from blue sheet 10B. Using sheet 9A, cut the image with scissors. Glue all layers on the base as shown. Stamp flowers, ‘Baby Boy’ and the character of a koala bear in black ink. Paint with the watercolor paint. Shade the ‘Baby Boy’ with a blue marker. Die cut with the coordinating die. Die cut the koala bear and ‘Baby Boy’ many more times from white paper and adhere the layers together to get a spatial effect.

Stamp the leaves with Ranger Archival Jet Black ink on Deluxe paper. Apply green ink using the dauber. Die cut with the coordinating die. Create a layered composition as shown using 3d squares under the flowers.

Other Products: Die cutting machine Cut’n’boss, heatgun, water mister, hot glue gun, hot glue, scissors, watercolor paper, memento summer sky, rose bud, new sprout and dandelion, stickles yellow, lime green, waterfall, thistle

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

For more tips on creating with the Floral Fashionista collection, watch the tutorial at https://youtu.be/9V6JOqdQtC8.

Instructions: The finished card measure 6 inches by 5 inches. Cut the card base in a white card stock to 10 inches by 6 inches and score at 5 inches on the longer side. Fold to make a side folding card. Cut a 4 3/4 x 5 3/4” piece of pattern paper from the Tender Moment Collection (#6A) and glue it to the card base. Then cut out another piece of pattern paper 4 1/4 x 5 1/4” (paper 3B) and glue it over the base with 3D foam to give dimension to your card. Do it again with aanother 3 3/4 x 4 3/4” paper (paper 6A again).

Take a watercolor paper and cut it with a square scallop die from Eyelet Rectangles & Basics Die. Take a piece of plastic (sandwich bag, etc). Put some ink on it, randomly. Add water with a spray bottle and put your plastic randomly on your watercolor paper. Dry with a heat gun and do it again with another color. I use 4 colors: memento summer sky, rose bud, new sprout and dandelion. Glue it in the center of the card.

Stamp on white cardstock animal and title of your choice from the tender moments collection with the archival ink jet black. Color it with zig-clean-color-real-brush-markers (I used peach pink, pale pink, light green, light violet). Cut it with the coordinating die. Glue your animal with 3D foam to give dimension. For the title, cut 5 more pieces in white cardstock and glue everything together to make a chipboard. Add 3D crystal lacquer on it to give a nice glossy look. Glue it in your card when dry.

Stamp little flowers from floral fashionista using different ink onto flower shaping paper, colour the centre with the same color. Colour the reverse of the flowers and diecut with the coordinating die. Place facedown into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give futher shape with Deluxe flower shaping kit tools. Poke a hole in the centre of the flowers and add= stamens, secure with hot glue.

Add one flower close to you animal and make a little bouquet at the right of your title. Add leaves from French cottage collection and bloom spray from Wild aster collection (both stamp in green). Add a little bit of stickles and pink color on the bloom spray.

Other Products: White Pearl Metallic Cardstock, Light Blue Cardstock, Zig Marker Haze Blue, Embossing Folder, Dimensional Tape, Sheer Shimmer Spritz – Sparkle, Small Dimensional Dots

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

Instructions: Click here to view a photo of the inside of the card. Card size is 5 x 7”. Score and fold 10 x 7” light blue cardstock at 5” on the long side to create side fold card base. Cut a 6 7/8 x 4 7/8” white pearl metallic mat layer and adhere to card base using dries clear adhesive. Cut blue mat layer 4 1/2 x 6 1/2”. Cut white pearl metallic layer 4 x 6”, dry emboss and adhere to blue mat layer using dries clear adhesive. Adhere to card base using dimensional tape. Cut white pearl metallic mat layer 4 7/8 x 6 7/8” and light blue mat layer 4 5/8 x 6 5/8” and adhere to inside of card.

Stamp koala image from Baby's Friends Cling Stamp Set, baby boy and rose spray images from Welcome Baby Cling Stamp Set on watercolor paper using Memento London Fog ink. Color using Zig markers; pale green, haze blue, light gray, pale pink and yellow and diecut using coordinating dies. Diecut one more time each and adhere the layers together. Spray with Sheer Shimmer Spritz – Sparkle.

Using the second, third and fourth largest dies from Diamond Basics Die set and the second largest die from the Eyelet Diamond Die set, diecut multi-level frame from white pearl metallic cardstock with a light blue backing. Adhere the koala bear to the blue backing and adhere the frame layers together using Darice foam strips. Adhere to card base. Stamp ‘welcome’ on the diamond shape previously diecut and adhere to inside of card.

Lightly shape the rose sprays and adhere to the frame using dimensional dots and hot glue and to the inside of the card using dries clear adhesive. Adhere Baby Boy to card base using small dimensional dots and hot glue.

Other Products: Ranger Distress Ink Peeled Paint, Distress Oxide Broken China, Ribbon, watercolor pencils, colorful glitter

For more tips on creating with the French Cottage Collection watch the tutorial at https://youtu.be/cATv3wk2_sM.

Instructions: Cut white card base and fold with dimensions of 6 1/4" x 6 1/4". Cut a paper 6” x 6” from HCDP1-2114 French Cottage Paper Collection and glue. Cut another paper from the collection with dimensions of 5 3/4” x 5 3/4” and glue. Cut the largest element of the Eyelet Oval Die from white cardstock and glue in the middle of the page. From HCDP1-2114 French Cottage Paper Collection cut the matching element from paper collection.

Stamp images from HCPC-3910 Cottage Lifestyle on white cardstock and paint them using watercolor pencils. Cut all the images using their coordinating dies and cover with colorful glitter. Glue as pictured.

To create flowers, stamp the flowers from the HCPC-3909 French Cottage 'scapes set on the Deluxe Flower Shaping paper a few times using Archival Ink-Rose Madder and Distress Oxide Broken China and die cut using the coordinating dies. Shape using Deluxe Flower Shaping Kit. Cover the center of the flowers with glue and add Ribbit Prills and Go Man Go Prills.

To create leaves, stamp the leaves from the same sets on the Deluxe Flower Shaping paper with Distress Peeled Paint ink, die cut with the coordinating die, shade using this same ink.

Cut the sentiment from the paper collection and place all the elements as shown.