Instructions:

The ready top-fold card from smooth white cardstock measures, 6 1/2" by 6 1/2". To prepare the card base, cut 2 pieces of white cardstock measuring, 6 1/2" by 7" and 6 1/2" by 6 1/2". Take a 6 1/2" by 7" cardstock panel and score at 1/2" on 7" length and crease well. This will make a hinge on the panel to secure another 6 1/2" by 6 1/2" panel. 

Next, choose a light green plainer paper from the designer paper collection and chop 6" by 6". Choose another coordinating paper and chop measuring 5 3/4" by 5 3/4". Mat a golden layer using Luxe gold cardstock making a delicate border of 1/16th" on all sides. Layer the panels as shown on the ready card base. 

Cut 2 pieces each from white and gold cardstock using Slim Elegant Rectangle Die and glue the gold die cut on the bottom, creating a delicate shadow. Once dry, chop the filigree sides of the die cut and create a backdrop for the card front by layering the die cuts on all four sides as shown.

For yellow-golden vellum Lilies, Stamp the flowers on Vellum Flowerite cardstock using Hero Arts Versamark ink and sprinkle golden heat embossing powder. Dust extras in the funnel tray and heat set the flower petals. Cut the petals using its coordinating die. Color the petals using Mustard Seed distress Oxide and shape them using flower shaping tools. Form the flowers and prick the center to add Petite Pollen Stamens - Medium. Prepare 1 medium flower of 3 petals and 2 small flowers of 2 petals each.

Stamp, color, and cut a few Wisteria flowers using Leaf Green Archival ink, color them in the center using the same ink and shape them using a flower shaping kit. Add flower beads using a glossy accent and use these flowers as fillers.

Stamp 2 sets of leaves using Leafy Accent stamp andGarden Lily stamp with Olive Green Archival ink and cut them using its coordinating die. Color the leaves using the same inks and shape them using a deluxe flower shaping kit. Once, all the elements are ready, assemble the card as shown and complete the card by adding a sentiment from Slim Eyelet Heart Rectangle Die.

Other Products: Die Cutting Machine, Score Board, Bone Folder, Smooth White Cardstock, Scissors, Double Sided Tape, Flower Seeds, Glossy Accent, Tacky Glue, Funnel Tray, Versamark Ink, Distress oxide Wild Honey, Fired Brick, and Heat Gun

Instructions:

The ready side-fold card from smooth white cardstock measures 4 1/4″ by 5 1/2 “. To prepare the card cut the smooth white cardstock measuring 8 1/2″ by 5 1/2”. On the 8 1/2″ side, score at 4 1/4″ and crease well.

Choose the paper from the designer paper collection and cut a piece measuring 3 3/4″ by 5″. Mat the Luxe gold cardstock behind the panel creating a delicate border of 1/8″ on all sides and layer the panel on the card front.

Cut one piece each from white and gold cardstock using Slim Elegant Rectangle Die and glue the gold die cut on the bottom, creating a delicate shadow. Once dry, chop the filigree sides of the die cut and create a backdrop for the card front by layering the die cuts on the top and bottom of the card front. 

For yellow-golden vellum Lilies, Stamp the flowers on Vellum Flowerite cardstock using Versamark ink and sprinkle golden heat embossing powder. Dust extras in the funnel tray and heat set the flower petals. Cut the petals using its coordinating die. Color the petals using Mustard Seed distress Oxide and shape them using flower shaping tools. Form the flowers and prick the center to add Petite Pollen Stamens - Medium. Prepare 1 medium flower of 3 petals and 2 small flowers of 2 petals each. 

Stamp, color, and cut a few Wisteria flowers using Leaf Green Archival ink, color them in the center using the same ink and shape them using a flower shaping kit. Add flower beads using a glossy accent and use these flowers as fillers.

Stamp 2 sets of leaves using Leafy Accent stamp and Olive Green Archival ink and cut them using its coordinating die. Color the leaves using the same inks and shape them using a deluxe flower shaping kit. Once, all the elements are ready, assemble the card as shown and complete the card by adding a sentiment from Slim Ornate Rectangle Die

Other Products: Smooth White cardstock, Versamark ink, Funnel Tray, Heating Tool, Die cutting machine, Scoreboard, Double sided tape, Distress Oxide Wild Honey

Instructions:

Prepare a 5 x 7" white card base. Top with a piece of the Luxe Gold slightly smaller. Cut a piece of black card stock slightly smaller and dry emboss with an embossing folder of your choice. Slightly run the Encore Gold ink pad over it to highlight the design left from the folder. Add to the card.

Die cut 2 of the Oval Filigree Frames, one white and one Gold.  Marry the 2 together off setting slightly so the Gold shows. Add to the center of the card.

Use the Large Oval die and die cut a piece of the Decorative Dragonfly paper, add on top of the Filigree Oval. Use the Large oval dies #2 and 3 and make a frame to go over the Dragonfly paper along with a piece of Clear Card stock;  Add fillers to make a shaker card. Add foam strips around the oval die cuts and add on top of the fillers to make the shaker card. 

Stamp the leaves on white with the Cottage Ivy color with the Vivid Chartreuse. Cut out with the coordinating die, color the edges with more of the Cottage Ivy, place in the matching mold and run through the die cut machine to shape.

Stamp the Small Wild Roses on white with the Plum, cut out with the coordinating die, place in the matching mold and run through the die cut machine to shape. Stamp the Dragonflies on white with Black ink, color in with the Zig Markers, cut out with the coordinating die. Arrange the leaves, flowers and Dragonflies on the card. 

To finish, add Gold Gala flakes to the center of the flowers and glitter on all the leaves, flowers and dragonflies.  

Other Products: Paper Trimmer, Die cut machine, Black card stock, cuttle bug embossing folder, Gold Gala glitz, beads,

Instructions:

Ready side fold card measures 7" × 5". Take a ready card base, place dies from Curvy Decorative Border Die set on front card panel and run through die cutting machine. Take a piece of vellum paper measuring 5" × 7" and glue it on the back side of card's front panel. Take a piece of designer paper measuring 4" × 6.75". Place die from the Curvy Decorative Border Die on one edge to cut shaped mat. Distress edges with matching ink and adhere it on card base as pictured. Cut another mat from designer paper collection measuring 4.75" × 6.75", distress edges with matching ink and adhere it on inside  panel. Cut a strip from Luxe Gold cardstock measuring 1" × 7" and one strip from white cardstock measuring 0.75" × 7". Distress edges of white cardstock strip with Teal Zeal ink and stamp sentiment on it. Glue both strips on card using dimensional tape.

Stamp peacock image on neenah solar white cardstock using black memento and paint with copic markers. Cut with coordinating die. Stamp Garden Lily flower on deluxe flower shaping paper using magenta hue ink and sea grass ink. Stamp leaves using leaf green ink. Cut with coordinating dies and paint using same ink. Shape flowers and leaves using shaping mold. Stamp classic rose leaves using fern green ink and cut with coordinating die. Paint leaves using leaf green ink and shape using shaping mold. Glue peacock on card using foam dots. Arrange flowers and leaves on card using hot glue as pictured.

 For finished look, apply Crystal Clear on flowers, leaves and peacock using Art glitter clear drying adhesive.

Other Products: Smooth White Cardstock, Sea Grass Archival, Copic Markers

Instructions:

Cut a piece of 5" x 7" pattern paper from Floral Frames paper collection and adhere it on a same sized card base. Die cut 2 pieces of white cardstock using the dies from Regal Lattice Gateway Die. Cut them and adhere them on the cardbase as shown to create a rectangular frame. Cut a piece of pattern paper  to fit inside the rectangular frame and adhere it on the card. Die cut a piece of pattern paper from the same paper collection using the dies from the same die set. and adhere it inside the white frame.

Stamp the butterflies from Large and Small Floral Butterfly Cling Stamp sets on a piece of vellum using Versamark Ink and heat emboss using WOW White embossing powder and WOW heat gun. Die cut them using matching dies from Large and Small Floral Butterfly. Adhere them on the card front as shown. Add a few rhinestones to the butterfliy bodies.

Stamp the Small and Large  Wild Roses with Manganese Blue Archival ink and the Smallest Sweet Peony with Vibrant Fuschia Archival ink on a piece of Art Foam Paper. Ink the Wild rose with the same ink on both sides. Ink the Sweet Peony with both the inks to get a pretty purple color. Die cut them using the matching dies from Small and Large Wild Rose dies and Small Sweet Peony Die. Shape them using an iron and Deluxe Flower Shaping kit. Add Lettuce Entertain You Prills & green bead stamens to the wild rose flower centers and medium pastel pearl stamens to the sweet peony flower centers.

Stamp the leaves from Large Wild Rose Cling Stamp set on a piece of Art foam paper with Olive Archival Ink several times. Color them with Leaf Green Archival ink and Library Green Archival ink. Die cut them using the matching die from Large Wild Rose Cling Stamp set. Shape it using an iron, Large 3D Wild Rose Shaping Mold and a piece of sponge.

Stamp the Leaves from Holly Berry Spray Cling Stamp Set on a piece of Deluxe Flower Shaping Paper with Olive Archival ink. Ink it lightly with Leaf Green Archival ink. Die cut these with the matching die from Holly Berry Spray Die. 

Arrange and adhere all the flowers and leaves as shown. Add a few Ladybugs made with Ebony Black and Red Berry Nuvo Drops to the flower arrangement. Add a few pearls and rhinestones to add finishing touch to the card.

Other Products: Red Berry Nuvo Drops, iron, Tim Holtz Stamp Platform, Tim Holtz Glass Media Mat, oval makeup brushes, sponge, pearls and rhinestones.

Instructions:

Cut a piece of 9 1/4” x 8 1/2”, score at 4 1/4” along the 8 1/2” and fold. Die cut the shaped edge using the outline die from the HCD3-7446 Slim Gateway Rectangle Die hanging slightly over the edge. Die cut two decorative dies using the No. 2 die from the HCD3-7446 Slim Gateway Rectangle Die out of Deluxe Flower Shaping Paper. Add Frosting Powder to the die with Dries Clear glue on a dry sponge. Adhere the decorative die to the shaped base card.

Stamp the posy flourishes and border images from the HCPC-31015 Peacock & Posies Cling Stamp Set and the posy flourish from the HCPC-31014 Ornate Peacock Cling Stamp Set on Iris cardstock with Jet Black ink. Colour the images using Zig Clean Colour Real Brush Markers and die cut with the coordinating dies. Adhere to the front of the card as shown with foam tape. Add Heart of Gold Prills to the centres of the flowers and Micro Mini Pearl Beads to the flourishes.  Add Crystal Clear glitter to the centres of the feathers with Dries Clear glue.  

Die cut three sentiments using the sentiments die from the HCD3-7448 Slim Ornate Rectangle Die - two from Deluxe Flower Shaping Paper and one from gold cardstock. Stack the three die cuts together with the gold die cuts on top and then adhere to the front of the card.

Other Products: Iris cardstock, foam tape, Dress My Craft Micro Mini Pearl Beads

Instructions:

Card size:  4” x 9 1/8”. Make a shaped card base with the outer die of the Slim Elegant Rectangle (see video). Cut another front from aqua decorative paper using the same die, then glue it to card. Cut the decorative outer part of the Slim Elegant Rectangle from white and from gold. Using the Curvy Accent Borders die set cut from white and from gold the lattice die plus a decorative border for one side. Glue the gold and the white pieces together off-setting slightly. Angle the border pieces and glue to inside of frame pieces, cutting off excess. Now, glue these to the card front.
Stamp sentiment using a teal color ink on white, die cut with oval, mat with gold oval a little larger. Adhere pop-ups and adhere to card top right corner.

Stamp pea hen using black, die cut then color using Coics. Die cut the peacock again from gold to use as a mat under colored peacock, glue them together off-set.  Add pop-ups under peacock then adhere to card left bottom corner.

Stamp Wild Asters using Fuchsia, sponge with Magenta Hue, die cut, sponge the backs and sponge the edges. Place upside down on foam mat, from the Deluxe Flower Shaping Kit, use a small/medium stylist to shape flowers starting at tips and working toward center. Glue 2 together. Pierce center of each flower. Glitter flowers.

Take out enough stamen to make 3 flowers, set them on waxed paper or paper palette then dye them with Mustard Seed Stain. Insert into flowers when dry.

Stamp Leafy Accents using Bamboo Leaves, sponge with New Sprout, die cut then sponge the backs, form in the shaping mold. Brush on lacquer.

Glue flowers and leaves to top left and bottom right. Glitter card base randomly.

Other Products: White cardstock, white Painty Pen, Mustard Seed Distress Stain (for dying stamen), Copic Markers: BG10, BG11, BG32, BG34, Y19, Y38, RV52, RV55, RV17, YG03, YG23

Instructions:

Card size is 5 1/2 x 5 1/2”. Cut Deluxe Flower Shaping paper to 5 1/2 x 11”, score and fold at 5 1/2”. Cut aqua paper from paper collection slightly smaller, ink edges with Garden Patina ink and adhere onto card base. Cut a green strip of paper from paper collection to 2 1/2 x 5 3/4”. Cut Deluxe Flower shaping paper to 2 1/4 x 5 3/4” stamp sentiment using a combination of Leaf Green and Paradise Teal ink, ink edges with Leaf Green ink and adhere onto green strip using foam adhesive

Stamp Window frame twice onto pink paper from paper collection using Vibrant Fuchsia ink, diecut with ornate arch die. Use dauber and white ink to slightly soften the edges, then emboss with Bridal Embossing powder, heat set. Adhere these as accents under green strip, trim edges with scissors then adhere strip onto card base.

Stamp Ornate Peacock onto Deluxe Flower Shaping paper using a combination of inks. Use Leaf Green, and Paradise Teal, then diecut. Color using Leaf Green, Garden Patina, Vibrant Fuchsia and a touch of Sunflower on the beak. Use Hydra Sponge to apply Crystal Lacquer onto image for a soft shine. Diecut an additional peacock from Luxe Gold cardstock and layer together. Shape softly with Deluxe Flower Shaping Kit and adhere onto card as shown, using foam adhesive. Finish with a touch of Baby’s Breath Glitter for that added sparkle.

Other Products: Foam Adhesive, Diecutting Machine, Scissors

Instructions:

Create a top fold card measuring 6 1/2” x 6 1/2”.  Choose a designer paper from Ornate Peacock Paper Collection and cut it to the size 6 1/4” x 6 1/4”. Cut a white die cut using Stairway Gardens Die. Cut a coordinating paper from the same collection, a little smaller than the die-cut so that the white edges are shown. Adhere this panel on the ready card base using foam tape.

Using Elegant Hearts Centerpiece Die cut the center element from Luxe Gold Cardstock. Choose a designer paper from the same collection and cut the coordinating solid octagon and glue them together as shown. Now die cut a decorative corner from Luxe Gold card stock using corner dies from Album Tags and Accents Die. Arrange all these ready die cuts on the card as shown.

Choose and stamp the images from Ornate Peacock Cling Stamp Set and Peacock & Posies Cling Stamp Set on a smooth watercolour paper using Night Sky Archival ink. Paint all the images using Zig Clean Clear Brush Markers. Cut all the images using their coordinating dies. Also add Minnie Pearls prills to images as pictured.

For Clematis Flower, stamp Clematis flowers using Leaf Green Archival ink on Flower shaping paper and cut them using their coordinating dies. Color the flowers using the same ink and shape them using coordinating shaping mold. Now add Go Green prills to the centre of flowers.

Once all the elements are ready, assemble the card as shown. Add a stamped sentiment from Celebrate Love Sentiments Cling Stamp Set. For final look, apply Crystal Clear powder to the flowers using Art glitter dries clear glue.

Other Products: Die Cutting Machine, Score Board, Bone Folder, Smooth White Cardstock, Scissors.

Instructions:

The ready card base is a sheet of white cardstock measuring 8 x12 inches in size, scored and folded in half along the long side to create a base measuring 8 x 6 inches. Using the sheets from HCDP1-2147 Garden Lily Paper Collection, cut 2 pieces of the Blue pattern paper to size 1/4 inch less than the card base, sponge the edges with Pink Peony ink and adhere them to the front and inside panels. 

Cut another piece of a pattern paper with the outline die of HCD2-7383 Simply Classic Rectangle Frame Die, sponge the edges with Pink Peony ink and adhere it to the card front using dimensional tape. Using the large decorative frame die, cut twice using white cardstock and one time with Luxe gold cardstock. Stack and glue 2 each of the white cardstock pieces with the gold die-cut piece underneath it slightly off-centered. Adhere this piece to the outline frame using dries clear glue. 

Stamp and Gold heat emboss twice with HCPC-31013 Garden Lily Bouquet & Buds Cling Stamp Set onto white cardstock and color using water-colors. Cut the images using the coordinating die and add some Baby's Breath Ultrafine glitter by sponging some dries clear glue. 

Stamp the sentiment onto a piece of the pattern paper with Bluebird ink and cut using the tag die. Add another layer of Gold cardstock die-cut using the ouline layer of the sentiment piece and stack them using dimensional tape. Arrange all the ready elements on the card front using dimensional tape as shown and finish off the card by adding some White flat-back pearls around the arrangement.

Other Products: Dimensional adhesive, funnel tray, scissors, paper trimmer, scoring board, die cutting machine, Versamark ink, Bluebird Archival ink, White flat-back pearls, watercolors, water color brushes

Instructions:

Cut a piece of white cardstock to 11 x 5.5", score at 5.5 " and fold to get a square base. Cut a piece of paper from the Ornate Peacock Paper Collection to 5 5/16 x 5 5/16". Cut a piece of paper from the same collection to 4.5 x 4.5" and a little bigger piece of the white cardstock. Cut out a white border with the Filigree Border & Accents Die. Adhere them to the base as pictured. Using die No. 2 from the Ornate Window Die Set cut out a piece of green paper with peacock from the Ornate Peacock Paper Collection. Add adhesive foam strips around this window to make a shaker box. Stamp a window with the Ornate Window Cling Stamp Set in Toffee Crunch ink, repeat it 3 times, color them slightly. Cut out 3 windows and a decor with dies from the Ornate Window Die as pictured and adhere them at the top of the shaker box. Adhere a piece of clear cardstock at the top window. Add some sequins and adhere the top of the window. Stamp a sentiment with the Celebrate Love Sentiments Cling Stamp Set in Cactus Flower ink and cut out. Adhere all elements to the base.

Stamp blossoms from the Hollyhock Petals & Leaves Cling Stamp Set in Forget Me Not ink, color them with Majestic Violet and Forget Me Not inks, diecut with coordinating dies and shape with mold. Stamp blossoms from Clematis Cling Stamp Set  in Majestic Violet ink onto Deluxe Flower Shaping Paper, color them with the same ink, diecut with coordinating die and shape with mold.  Add Pastel Pearl Stamens Small to all flowers. Stamp blossoms from Lush Lilac Stamp Set in Majestic Violet  and Cactus Flower inks onto Deluxe Flower Shaping paper and diecut with coordinating die. Shape them with Deluxe Flower Shaping tools and add some Ribbit Prills. Stamp 3 branches from Leafy Accents Cling Stamp Set in Fern Green ink, color them with Leaf Green ink, cut out with coordinating die and shape with coordinating mold. Stamp 5 posies from the Peacock & Posies Cling Stamp Set and Ornate Peacock Cling Stamp Set in Tuxedo Black ink, color them and cut out with coordinating die. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers. Add some self-adhesive crystals.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, sisal, colored pencils, self-adhesive crystals

Instructions:

Cut a blue strip of paper from the collection to 4” x 7.5” and use the plain curvy decorative border die along the top edge of the paper. Adhere to a 4.75” x 7” green paper, overlapping to form a 7.5” square. Rag the edges and adhere to a 7.75” square card base. Die cut the 2 largest curvy dies using white card and adhere these to the curve of the blue paper.

Stamp the window x2 onto flower shaping paper using rich cocoa ink, die cut the outer frame and the inner windows, adhere onto a 3rd kraft card die cut of the window. Add colour using toffee crunch ink and adhere a die cut of the outer edge of the window. Use the inner window die to cut paper from the collection and adhere the papers into the window apertures. Stamp the ornate part of the window onto flower shaping paper using rich cocoa ink, die cut and adhere to a 2nd die cut of the frame top. Adhere this to the top of the window using foam pads.

Make the peacocks:  Stamp onto blue paper from the collection using danube blue ink and die cut. Colour using Danube blue ink and copics- Y35 & RV06. Adhere to a white card die cut of the peacock and sponge over with dries clear adhesive and sprinkle over with transparent glitter. Add shape using the flower shaping tools. Secure the peacocks to the card as shown using dries clear adhesive.

Make the flowers: Stamp 1 large 2 medium and 7 small sunflowers using Lilac posies ink onto flower shaping paper. Colour using the same ink and increasing the colour towards the centre. Add rhubarb stalk to the centre of the flower. Die cut and shape using the flower shaping tools. Place a dot of hot glue in the centre of each set of petals and cover with heart of gold prills, allow to cool and remove excess. Secure to the peacocks using a small amount of hot glue.

Die cut enough letters from the Number and Letters Die to write the sentiment in white and adhere to the card base.

Other Products: 7.75" square white card base, hot glue, foam pads, copic Y35 & RV06

Instructions:

My finished card size is 4 1/4" x 5 1/2".  It is a fun fold card called a Flap Fold card. Make a regular sized card 4 1/4" x 5 1/2.  Cut a piece of white cardstock 3 1/4" x 5 1/2" and score at 1/2".  Glue this piece to the back of the card centering it. This piece is meant to fold over to the front of the card and to hold the card closed. I like to use magnets on flaps so they don't come open. Decide on placement of the magnets and glue down. Cover the flap with a piece of Sheet 12B of the paper collection. I picked out a sentiment from Sheet 3A of the paper collection and cut it out. I cut each end of the sentiment so that it looks like a banner. I just eye balled it and then I used dimensional tape to adhere it to the card front. It also covers where the magnet is so that it is hidden.  

Cover the card front with a piece of Sheet 8B of the paper collection and then I chose a card front from Sheet #9A of the paper collection and cut it down so it would fit behind the flap. This piece just adds a bit more interest to the card and you could stamp a sentiment on it if you wanted.  

I covered the inside of the card with a piece of Sheet 12B of the paper collection and cut a layering piece of white cardstock to go on top of that.  Next cut a strip of Sheet 8B and glue to the piece of white cardstock. This was just a scrap piece of paper I didn't measure it at all.

Stamp the Hollyhock flower petals onto Deluxe Flower Shaping Paper using Magenta Hue ink and color the flowers with that as well. Use Buttercup for the centers of the flowers and then cut out with coordinating dies. Layer onto mold, spritz with water and run through the die cut machine. Allow to dry then add the Prills to the centers of the flowers.  

Stamp the Leafy Accent leaves with Leaf Green ink and color with same. Cut out with coordinating dies and then edge with Olive ink. Layer onto mold, spritz with water and run through the die cut machine.  Lay out onto desk to dry.  

When everything is dry, decide on placement and hot glue down. The card is finished.     

Other Products: Die Cut Machine, White Cardstock, Dimensional Tape, Magnets, Hot Glue Gun

Instructions:

Cut a piece of white cardstock to 7” x 10” and score in half at 5”. Cut a piece from sheet 6A of the HCDP1-2148 Ornate Peacock Paper Collection measuring 5” x 7” and ink the edges using HCDA2-450 Stack and Store Daubers with Manganese Blue Archival ink. Using a Hydra Sponge and Dries Clear Adhesive sit the edges down into the sponge with glue in it and then sprinkle with glitter. Once dry, glue to the card front. Now cut a piece of Luxe Silver Cardstock to 4 3/8” x 6 1/4”. From the paper pad, cut Sheet 9B to 6 1/8” x 4 1/4” and sheet 10A to 4” x 5 7/8. Layer these 3 pieces together with Dries Clear Adhesive as shown and add to the card front using 3D foam tape. Using the birdcage die from the HCD1-7172 Sweet Lilac Scroll & Birdcage Die Set, cut 3x in the HCPP1-475 Deluxe Flower Shaping Paper and 1x in the Luxe Silver Card Stock paper and glue these all together with the silver on top. Adhere this to the card front.

Using the HCD1-7451 Peacock Posies Cling Stamp Set, stamp in Versamark Ink onto Deluxe Flower Shaping Paper. Heat emboss using blue heat embossing powder. Color using both Zig Color Clean Markers as well as HCDA2-450 Stack and Store Daubers in Forget Me Not, Manganese Blue, and Viridian Archival inks. Add a little dimension to the peacock by using the Deluxe Flower Shaping Kit and shaping from the reverse side. Now stamp the flower from the HCPC-3976 Curvy Floral Frame Cling Stamp Set onto Deluxe Flower Shaping Paper 4x with Magenta Hue Archival Ink. Color using a variety of pinks including Magenta Hue, Pink Peony, and Vibrant Fuchsia. Die cut with coordinating dies. Shape using Groove Golf Tools. Layer and add a mixture of Bright Pearl Stamens - Small to the centers. Add glitter and rhinestones for a finishing effect. Using the HCPC-3912 Cascading Wisteria Cling Stamp Set, stamp one leaf branch with English Ivy Archival ink and color with Leaf Green Archival Ink. Die cut with coordinating die then shape using the Deluxe Flower Shaping Kit. Use small pieces from this branch as the small foilage for the flowers.

Using the HCD1-7204 Arrows & Banners Die Set along with the HCDC-3846 Thank You Sentiments Cling Stamp Set, stamp out the “thank you” sentiment with Magenta Hue ink. Die cut it using the banner dies as well as a scrap of Luxe Silver Card Stock. Ink the edges of the white banner with both Magenta Hue and Manganese Blue inks for a two tone look. Then layer these flags and adhere a crystal using Dries Clear Adhesive. 

To complete the card simply arrange the peacock, flowers, and leaves as desired. Once everything is arranged glue in place making sure your sentiment shows. Add a few extra crystals on the background to finish the project. Complete the inside by adhering a piece of sheet 6B, using the 3rd largest Flourish Companion Frame Die, cut from sheet 9B of the paper collection, cut the 4th die from Luxe Silver cardstock and white cardstock. Adhere as pictured. 

Other Products: Rhinestones, Blue Embossing Powder, Glue Gun, Glue Sticks, Paper Trimmer, Die Cut Machine

Instructions:

Ready side fold card measures 5.5" × 7.5". Cut a mat from designer paper measuring 5.25" × 7.25", distress edges with matching ink and adhere it on ready card base. Cut a frame from white cardstock using die from Oval Filigree Frame Die set. Glue it on card. Cut an oval piece from designer paper and a decorative oval from white cardstock using die from Simply Classic Oval Frames Die set. Glue both pieces on card using dimensional tape  Cut an oval piece from designer paper and a piece from vellum paper using die from the same set. Glue them on card using adhesive as pictured.

Stamp peacock image from Ornate Peacock Stamp Set on neenah solar white cardstock using black memento. Paint using copic markers and cut with coordinating die. Cut one more peacock from Gold cardstock. Glue both pieces on card using foam dots. Stamp floral image from Ornate Peacock stamp set on white cardstock using manganese blue ink. Paint with same ink and cut with coordinating die. Trim flowers and shape them using stylus. Glue these flowers on peacock as pictured. Add nuvo drops to center of the flower. Take a strip of white cardstock, stamp sentiment on it using teal zeal memento ink and distress edges with matching ink. Adhere it on card using dimensional tape. 

For finished look ,apply Crystal Clear on peacock using Art Glitter Clear Dries adhesive.

Other Products: Smooth White Cardstock, Neenah Solar White cardstock, Copic Markers,

Instructions:

Ready card base size 10 by 4 1/2 inches. For the card base, take cream cardstock measuring 9 by 10 inches, folded into half from 9". Trim paper using Ornate Peacock Paper Collection from sheet number 9B measuring 9 3/4 by 4 1/4 inches.

Die cut the shadow frame from Slim Elegant Rectangle Die on Designer Paper, add extra layer underneath for the sturdindess using clear glue and add this shadow frame on the card using dimensional tape, Die cut the big design frame die from same collection on deluxe card and color the frame using magenta hue ink with dauber,  apply clear glue on the frame and cover with Nida Tanweer Magic Glitter Powder, add this frame on the card as shown using clear glue.

For the flowers, stamp the Zinnia flower images from Small and large Garden Zinnia Cling Stamp Set using versamark Embossing ink cover the images with white embossing powder on mint card, heat it using heating tool. Die cut the images using coordinating dies, color the centers of zinnia with Salvage patina ink using daubers, use shaping stylus and groove golf shaping tool to shape the petals from back. Use hot glue to assemble the flowers as shown. For the centers add decorative beads using hot glue. Dab some Dries Clear glue onto a sponge, apply over the petals as desired, sprinkle with Nida Tanweer Glitter Powder and tap off.

Stamp the posies images on the vellum using versamark embossing ink, cover the images with snowflake tinsel embossing powder and heat it using heating tool. Die cut the images using coordinating dies.

Stamp the sentiment on the cream card using Paradise Teal Ink from Celebrate Love Sentiments, trim and add as shown usinh hot glue.

Add rhinestone to embellish the card.

Other Products: Cream Cardstock, Mint Cardstock, Hot Glue, Vellum, Salvage Patina, Pearls, Rhinestone, Snow Flake Tinsel Embossing Powder, Nida Tanweer Magic Glitter Powder, dimensional tape, Versamark embossing Ink.

Instructions:

Card size is 7 x 5”. Score and fold 10 x 7” white cardstock at 5” on the long side to create card base. Cut Ornate Peacock Paper Collection sheet 1B to 6 7/8 x 4 7/8”, ink the edges with Archival Forget-Me-Not ink and adhere to the card front. Cut sheet 5A to 6 7/8 x 4 7/8”, ink the edges with Forget-Me-Not ink, stamp the ‘Happy Birthday to You’ sentiment from the Special Birthday Sentiments Cling Stamp set using Archival Vibrant Fuchsia ink and adhere to the inside of the card. Cut two tags from the paper collection using the smaller Tickets and Tags Die, ink the edges with Forget-Me-Not ink and adhere to two white cardstock tags cut using the larger tag die. Punch the holes in the tags, diecut the reinforcements for the holes using the same die set and color with Forget-Me-Not ink, adhere the reinforcements to the tags and add fuchsia satin cord. Trim a little off the bottom of the tags and adhere them to the right side of the card front as shown.

Create a 5 x 5” shadow box. Score a 7 x 11 1/2” piece of Deluxe Flower Shaping Paper on the short side at 1/2”, 1”, 6” and 6 1/2”. Score the long side at 1/2”, 1”, 6” and 6 1/2”. Trim the right top and bottom score lines off up to the first vertical score line, using scissors to cut tabs. (See sample on my blog.) Cut paper from the paper collection sheet 12B x1 4 7/8 x 4 7 /8”, x4 3/8 x 4 7/8” and ink the edges with Forget-Me-Not ink. Using removable tape, temporarily adhere the 4 7/8 x 4 7/8” designer paper to the front of the shadow box. Using the Cut Mat Create 2A die, cut the aperture in both the card front and the designer paper at the same time. Adhere the designer papers to the box using dries clear adhesive prior to assembling. Cut a 4 7/8 x 4 7/8” piece from the paper collection sheet 4A and adhere to the inside of the box. Finish folding at all score lines and adhere to form the shadow box. Adhere the shadow box to the left side of the card front using dries clear adhesive.

Stamp the fence from the Hollyhock Fence Cling Stamp set on white cardstock using VersaMark ink, cover with Ranger Super Fine Detail Embossing Powder, heat set using the Heat It Tool and diecut using the coordinating die. Diecut 4 more times from Deluxe Flower Shaping paper and adhere all the diecuts behind the stamped one to create a dimensional fence and adhere to the shadow box. 

Stamp the pretty peacock, the flourish from Peacock and Posies Cling Stamp set and the flourish from the Ornate Peacock Cling Stamp set on white watercolor cardstock using VersaMark ink, cover with Ranger Silver Super Fine Detail Embossing Powder and heat set using the Heat It tool. Diecut using the coordinating die and color using Zig Clean Color Real Brush markers – Fl. Green, Yellow, Persian Green and Dark Pink. Diecut each once more from white cardstock and adhere behind the stamped images for stability. Lightly shape the images using the Deluxe Flower Shaping kit. Adhere the peacock to the fence and the flourishes to the shadow box as shown using dimensional dots, hot glue and dries clear adhesive.

Stamp the Clematis flowers on Deluxe Flower Shaping Paper using Vibrant Fuchsia ink. Color the fronts and the backs using the same ink, diecut using the coordinating dies and shape using the 3D Clematis Mold. Add additional shaping using the Deluxe Flower Shaping kit. Adhere two petals of the same size together to create each flower and create one large, two medium and one small flowers. Pierce the flower centers and add Bridal Bouquet stamens using hot glue. Stamp the Garden Lily leaves on Deluxe Flower Shaping Paper using English Ivy Archival ink, color the fronts and backs with the same color, diecut using the coordinating die, add additional ink to the edges and shape in the 3D Lily mold. Using a paint brush, add dries clear adhesive to the flowers and leaves and sprinkle with Rajni Chawla’s Crystal Clear glitter.

Adhere the flowers and leaves as pictured. Add a little extra sparkle by randomly sponging the card front and the inside with dries clear adhesive and sprinkle with Crystal Clear glitter.

Other Products: White Cardstock, Strathmore Vellum Surface Cardstock, Diecutting Machine, Hot Glue Gun, VersaMark, Ranger Silver Super Fine Detail Embossing Powder, Dimensional Dots, Misti Stamp Positioner, Paper Trimmer, Funnel Tray, Fuchsia Satin Cord

Instructions:

Create a 6 x 6 inch card base in white cardstock.  Cut a 5.5 x 5.5 inch piece of green paper from the Ornate Peacock Paper Collection and adhere to card front. Cut the frame from the French Courtyard Die in white card stock and adhere to card front. 

Stamp the peacock from the Peacock & Posies Cling Stamp Set, the flourish x2 and the peacock from the Ornate Peacock Cling Stamp Set in Jet Black, color all with Zig markers, cut out with coordinating dies and add glitter.

Stamp the clematis from the Clematis Cling Stamp Set in Vibrant Fuchsia, sponge with Vivid Chartreuse and Vibrant Fuchsia, cut out with coordinating dies and sculpt with the 3D Clematis Shaping Mold, add stamens and glitter.  

Stamp the leaves from the Leafy Accents Cling Stamp Set in Olive, sponge with Vivid Chartreuse, cut out with coordinating die and sculpt with the 3D Leafy Accents Shaping Mold.

Cut out the inner decorative heart with the Decorative Heart Die in white card stock.  Stamp the sentiment from the Friendship Sentiments Cling Stamp Set in Jet Black on white cardstock and cut out with the inner heart from the Decorative Heart Die, distress with Vibrant Fuchsia.

Adhere the flourishes to the top of the card, layer the hearts as shown and then the peacocks with foam tape and then flowers and leaves.

Other Products: White cardstock

Instructions:

Cut out the white base of the card and fold it to 6" x 6". From  paper collection cut a slightly smaller square and glue to the base. Then cut a 5 1/2" x 5 1/2" square out of silver paper and a 5 1/4" x 5 1/4" square from the paper collection, adhere it the with Double Dots 100 pc. -3D Foam Circles.

Stamp element from the Ornate Window Cling Stamp set with black ink on white paper, color it with Memento Rich Cocoa ink. Then cut out with a matching die. Cut out the outer frame of the shutter windows from the silver paper, glue underneath the window.

On a paper collection strip, stamp the sentiment from the Cheerful Note Sentiments Cling Stamp set. Then glue it with a strip of silver paper.

Stamp elements from the Peacock & Posies set with black ink on white paper, color it with blue, green, red and yellow ink using Stack and Store Daubers. Then cut out with a matching die.

Glue everything as shown.

Other Products: Die cutting machine

Instructions:

The finished card measures 9 x 4 inches. Cut one piece of deluxe flower shaping paper 9 by 8 inches and score at 4 inches to make a top fold card. Place Slim eyelet heart rectangle die about 1/2" up past fold so that fold does not get cut. Use the same die again on a piece of paper #5A from the Garden lily collection. Ink the edge with library green ink and glue it to the folded card matching bottom and side edges.

Die cut 3 times the second biggest die from the same kit in the Deluxe Flower Shaping paper and glue them om each other to make a white cardstock. Ink the edge with magenta hue ink and glue it on the card.

Stamp your Lily flowers with mahenta hue ink onto white flower shaping paper, color the center and shade the edge with the same color. You can also color the back of the flowers. Diecut with the coordinating die. Place face down into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe flower shaping kit tools. Glue 2 layers together. In the center of the flowers make a hole and add stamens. With a brush add a little bit of 3D crystal lacquer on your flowers. Add glue on the tips of the flowers and dip it into crystal clear powder. Redo the same thing to make other flowers in sunflower ink color.

Also stamp  leaves with leaf green and color the center with a bit of library green ink. Diecut and use the mold to give shape to your leaves.

In deluxe flower shaping paper, die cut the eyelet rectangle and glue it with 3D foam in the center of your card. Also cut the small rectangle from the same kit in the paper #5A, ink the edge in leaf green and glue it on your card.  Die cut 3 times the sentiment from the same kit in the Deluxe Flower Shaping paper and glue them on each other to make a white cardstock. Ink the edge with magenta hue ink and glue it on the card. Add 3D crystal lacquer to give shine to your sentiment.

Put cheesecloth and sewing thread on the left of your card and make a bouquet arrangement on it. For the final touch, put glue on your pattern paper on the stamen and add crystal clear powder on it.

Other Products: Die cutting machine Cut’n’boss, heat gun, water mister, hot glue gun, hot glue, scissors, sewing thread, cheesecloth, ribbon, lace

Instructions:

Create base using outside die from Simply Classic Oval Frame Die set. Cut two pieces from white cardstock, glue it together on the top, and one from paper collection, adhere. Using frame die cut from gold paper and place onto card using Foam Strips for dimension. Cut smaller frame from paper collection and silver paper and adhere to the front of the shaped card using Adhesive Foam Strips for dimension.

To create Clematis flowers, stamp Clematis Cling Stamp set on white paper with Ranger Archival Ink Pad - Majestic Violet and cut using the coordinating dies. You will need 2 petals of each to create flowers. For bigger flower use the biggest stamp, for smaller flower use smaller size stamp. Colour the flowers with Ranger Archival Ink Pad - Majestic Violet using a sponge dauber. After colouring, place the flowers into the mold and run through cutting/embossing machine. Pierce the center and glue in some stamens using hot glue gun. Add a little hot glue to the underside of the flowers. Add dries clear adhesive around flower stamen and add prills.  Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

To create leaves stamp the Clematis Cling Stamp Set and on the white paper with Ranger Archival Ink Pad - Leaf Green, cut out with the coordinating die, shade use this same ink and shape leaves using mold. Sponge the leaves with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine,

Instructions:

To make this 5" x 7" tent fold, oval shaped card, take a 5” x 7” card blank and die cut using the Simply Classic Oval Frame Die Set, largest outside edge. Tape the die down with low tack tape, so that the top edge of the die is set slightly over the folded edge of the card. This way you preserve the fold. Die cut another largest outside edge in white card. Adhere to card front. Die cut the next size down in peach paper from the Garden Lily Collection Paper Pad. Adhere to card front. Die cut the next size down frame in white card, adhere to card front. Die cut the smallest size dies in peach paper and adhere.

Stamp onto Deluxe Flower Shaping paper with Ranger Archival Olive ink, seven sets of the Leaves from the Garden Lily Cling Stamp Set. Color with Ranger Archival Vivid Chartreuse ink using a Dauber. Lightly color the ends of the leaves with Pink Peony ink using a Dauber. 

Stamp the large Lilies from the Garden Lily Cling Stamp Set in Olive ink, lightly color with Vivid Chartreuse ink using a Dauber and add little dots of green in the middle using a Zig Clean Color Art Pen in Deep Green. Die cut with the matching dies. 

Add Leaves and Lilies to the Garden Lily Shaping Mold, lightly mist with water and run through a die cutting machine. Tap out and lightly shape the Leaves and Lilies on the reverse with the stylus from the Deluxe Flower Shaping Kit. Pierce holes in the centers of the Lily and thread through Green Beaded Stamens and Pastel Pollen Stamens. Add Dries Clear Adhesive, off- set the petals and cut off the wires.

Stamp in Olive ink Lily Buds from the Garden Lily Bouquet & Buds Cling Stamp Set, and Lily Buds from the Garden Lily Spray & Fillers Cling Stamp Set. Color with Pink Peony ink. Die cut with the matching dies. Lightly shape on the reverse with the stylus from the Deluxe Flower Shaping Kit.

Adhere the Lily Leaves across the center of the card to form a leafy bed. Adhere the Lily in the middle with hot glue. Adhere the Garden Lily Buds around the card.

Stamp onto white card in Olive ink, a sentiment from the Cheerful Note Sentiments Cling Stamp Set. Die cut with a tag from the Ornamental Tags Die Set. Adhere with hot glue. Sponge Dries Clear Adhesive over the Lilies and Leaves, sprinkle on clear glitter. All done.

Other Products: 5" x 7" card blank, low tack tape, white card, water mister, die cutting machine, paper piercer, hot glue, clear glitter.