Other Products: Fairy dust shimmer powder, Spellbinders nestabilities Label 14, white card stock

Instructions: Cut a 7" x 5" card panel from any paper collection. Adhere the whole card panel on 7" x 5" card base. Cut three die cuts from Spellbinders label 14 and distress them with green ink and Berrylicious ink very lightly. Layer them together and add a sentiment.

Stamp the flowers with Berrylicious ink and distress them with same colours. Cut with coordinating die. Mold and shape the flowers using the tool kit. Add stamens with prills. Add a little glue and apply shimmer powder. You can check Emma Lou's Video on making of the petunia flowers here.

Stamp the leaves with Cottage Ivy ink and lightly shade them light green ink. Cut with coordinating die and mold and shape the leaves on flower tool kit.

Cut out 4 swirl border die cuts from white cardstock using the Cut Mat Create die. Diecut the hummingbirds from the Botanic Orchid paper collection.

Adhere the swirl die cuts on the two corners of the card panel diagonally. Arrange the flowers using Designer dries glue. Add the birds. 

Other Products: Spellbinders Classic Circles - LG; ColorBox Fluid Chalk Ink Pad - Cheeky; Brilliance Ink - Lightning Black; Want2Scrap 72 Count - Pink Rhinestones; Want2Scrap 72 Count - Silver/Clear Rhinestones; Want2Scrap 72 Count - Turquoise Rhinestones; Art Glitter Ultrafine Transparent - Pinkilicious and Lettuce

Instructions: Begin by creating an 6" x 6" card out of White Cardstock. Next cut a 6" x 6" card front from the Classic Petunia Paper Collection and die cut the center using a Spellbinders Circle Die. Sponge edge of Classic Petunia 6" x 6" card front with Olive Grove Memento Ink and then adhere to the card base with Dries Clear Adhesive. Adhere die cut circle to the card base with pop dots. Using a Fantastix add Rose Coral Chalk Ink to white flowers on design paper. On White Cardstock with Tuxedo Black Memento Ink stamp the small petunias and leaves from the Small Classic Petunia Stamp Set, stamp the vining petunias from the Large Classic Petunia Stamp Set, stamp the basket from the Classic Petunia Bouquet Stamp Set and stamp the hummingbirds from the Regal Hummingbird Stamp Set. Die cut all with coordinating Dies. Also die cut two small stamens out of green design paper to use as filler. Using HC Stack and Store Daubers and Fantastix color the leaves using Guacamole and then Lime Pastel ColorBox Chalk Inks and the dark petunias with Lilac Posies Memento Ink and add Dark Peony ColorBox Chalk Ink to the centers and for the light pink petunias use Cheeky ColorBox Chalk Ink and add Rose Coral Chalk Ink to the centers of the petunias, including the leaves and petunias on the vining petunia. With a Fantastix add Lightning Black Brilliance Ink to the basket. Using HC Stack and Store Daubers and Fantastix color the hummingbirds with Berrylicious Chalk Ink, New Sprout Memento Ink and Teal Zeal Memento Ink. Cut vining petunia and hummingbirds apart as shown and shape petunias, leaves, vine, hummingbirds and basket with Deluxe Flower Shaping Kit. Sponge stamens with New Sprout Ink. Shape stamens with curling tool and add Dries Clear Glue to tips of stamens and dip in Crystal Glitter. Sponge edge of sentiment with Olive Grove Ink and adhere to card with pop dots as shown. Adhere all die cuts to card as shown using pop dots and Dries Clear Adhesive as needed. With Dries Clear Adhesive add Ribbit Prills from Bright Ideas Prills set to center of all petunias and add Hot Mama Prills, also from the Bright Ideas set, to the flower on the design paper. Add Pinkilicious Glitter to all flowers and Lettuce Glitter to leaves and hummingbirds. Finally, adhere Turquoise, Silver and Pink Rhinestones to upper left corner of card front as shown.

Other Products: White Cardstock, Canson Watercolor Paper, Cactus Flower Archival Ink, Spellbinders Labels Twenty Two, Cuttlebug Wildflower Embossing Folder, Dimensional Tape, Scor-Tape

You can watch a video on making the Classic Petunia here.

Instructions: My card size is 5 X 7. Make card base and set aside. Cut a piece of white cardstock 1/8” smaller and emboss with embossing folder. Use Scor-Tape to adhere to the card front. 

Next stamp the flowers, leaves and butterfly in Rich Cocoa and diecut with coordinating dies. Diecut stamens for flower centers. Sponge the leaves with Bamboo Leaves. Sponge the flowers and stamen with Cactus Flower ink. Use Bamboo Leaves and Cactus Flower to color the butterfly. Shape and add glitter to flowers, leaves and butterfly then set aside to dry. 

Stamp the sentiment with Tuxedo Black ink on a piece of white cardstock and cut out with the Labels Twenty Two Die. Edge the die cut with Cactus Flower Ink and then use the dimensional tape to adhere to the card front. Decide the placement for the flowers, leaves and butterfly and glue them down. You can also add glitter here and there on the embossed area of the card front for a bit more sparkle. 

Other Products: Smooth white cardstock, Vellum, Archival ink Plum, Black, Coffee, Library Green, Leaf Green and Olive Green, Rock Candy Clear Crackle, paper cutter or Xacto knife, White Heat Embossing Powder, Versamark Ink, Heat gun. Different sized Styrofoam buds, Acrylic paints, double sided tape

Watch this video https://youtu.be/KOy_qNB9OAk to see how to shape the Classic Petunias.

Instructions: For Petunia flowers, stamp and cut the multiple images of various sizes and paint them using Colorbox Harvest and Berrylicious. Shape the flowers on Deluxe flower shaping kit. For shaping of flowers, check Emma Lou's video. All the flowers and leaves are dressed up with Crystal Clear. The tiniest flowers used on the card are from the Wildwood Cottage Collection. After shaping the flowers, I have added small wired pollen in the center with the glue that dries clear. For berries, I have used various sizes of styrofoam buds, painted them with acrylic paint and then added frosting powder using Distress rock candy clear crackle. Heat a little to get the desired look. 

For Butterflies, Stamp the images with Versamark on vellum, sprinkle white heat embossing powder, dust extras, and heat set using the heat tool. Cut the images with coordinating die. The flower pots, cart, and flower vase is stamped with black archival and then painted with Zig Clean Clear markers. Once all the elements are ready, choose a designer paper with bench image and cut it to 6" by 7 ". Neatly cut the bench image using Xacto knife and keep it aside. 

Now for the base of the card, cut white card stock measuring 6" by 7" and layer the bench pattern paper on it. Using double sided tape now layer already cut image exactly on the empty space. For the top and bottom lacy border, cut 2 strips of white cardstock, lightly distress it using Picked Raspberry. Cut one edge using Classic Border Basics Die, and add white fancy lace to it. Before adhering the white lace, don't forget to score the pink distressed panel each time at 1/8". Adhere the whole top panel first on another white card mat and then to ready top fold, measuring 6 1/2" by 7 1/2". Finally, add a sentiment cut out from the same paper collection to finish up the card.

Other Products: Spiced Marmalade, Worn Lipstick & Peeled Paint Distress Oxide inks, Versamark Ink, Ranger Heat-it Tool, Hero Arts Glorious Petals stencil, Embosser, Martha Stewart scoreboard, white cardstock, Morning Dew Nuvo Drops, sequins & adhesive.

Watch this video https://youtu.be/KOy_qNB9OAk to see how to shape the Classic Petunias.

Instructions: Take a 4 1/4" x 5 1/2" white card base & ink it lightly with Worn Lipstick Distress Oxide ink using Stack and Store Daubers. Apply Spiced Marmalade & Worn Lipstick Distress Oxide inks on Hero Arts Glorious Petals stencil randomly & spritz a little with water. Take a piece of 4" x 5 1/4" white cardstock & press it on the inked stencil to transfer the design on cardstock. Adhere it on the card base. 

Die cut 2 pieces of each size of flower centers from Small Classic Petunia Die from white cardstock. Ink them with Peeled Paint Distress Oxide ink. Adhere the smaller size on top of larger piece so that the spokes of smaller piece are in the gap between the spokes of larger piece. Adhere them a little above the bottom edge of the card. Add the Morning Dew Nuvo Drops to the rounded ends of the die cuts.

Stamp the flowers & leaves from Small Classic Petunia Cling Stamp Set & Large Classic Petunia Cling Stamp Set with Versamark ink & heat emboss using Aged Ivory Embossing Enamel & Ranger Heat-it Tool. Die cut them using matching dies from  Small Classic Petunia Die & Large Classic Petunia Die. Ink them using Spiced Marmalade, Worn Lipstick & Peeled Paint Distress Oxide inks & shape them using Deluxe Flower Shaping Kit. Add a little Ribbit Prills from Bright Ideas Collection to make the flower centers. 

Arrange and adhere all the elements as shown. Add the Morning Dew Nuvo Drops to the flowers & leaves to mimic water droplets. Add some sequins to the background to add finishing touch to the card.

Other Products: Yellow, Green card-stock, 170gm, Aquarelle paper, Memento Inks: Thyme, Dandelion, Ranger: Heat Gun, Water Mister, Inking foam tool, Want-2-Scrap Say it with Bling, Bone folder, Water colouring brush, Scissors, Ruler, Mustard Seed distress ink, Lindy's Stamp Gang sprays Golden Sleigh Bells, Black Archival Ink, Hot glue gun, Versa-mark, Fussy Cutting Scissors, Double sided Tape, Double Sided Foam Tape, Fancy string, Misti, Hot glue gun, Dutch Doo-Ba-Doo modelling paste, Crafters Workshop Script mask

Watch this video https://youtu.be/KOy_qNB9OAk to see how to shape the Classic Petunias.

Instructions: This tent fold card measures 6 1/8" x 6 1/8" (16.5 cm) when completed. Taking the white card-stock make the tent fold card base. Using the yellow card-stock cut a little smaller for the matting. Taking the green card-stock, cut this to 6" x 6 ". Find the pink background design paper in the Petunia paper collection, cut this a little smaller than the green card-stock. Taking the mask and the modelling paste, apply to the design paper. When the paste is dry ink the edges with the Mustard seed distress ink. Add a touch of green on the letters with the Thyme ink (green). Adhere all the layers to the card base with glue or tape, except the top layer. This is done with double dots or foam double-sided tape to give height. 

To make the three lanterns, use the white card stock and stamp with the gold embossing powder, make six. You will find the petunia basket stamp and die in the Classic Petunia Bouquet sets. When die cutting the image, cut a few extra for each basket so the lantern will become a chipboard when all the layers are adhered together. Adhere the fancy string to the back of the card front and to the placement of the top of the lantern. Adhere the lanterns in place with double dots and glue. 

Make the flowers and leaves by stamping with the black archival ink, die cutting then shaping. Color the flowers and leaves. Apply the Lettuce Entertain You prills to the flower centres. When dry adhere in place to the lanterns with the hot glue gun or the clear drying glue. The leaves are snipped so they become separate leaves then they are tucked in under the flowers and adhered in place with the hot glue gun or the clear drying glue. Taking the bling border trim so it can be laid across the join in the lantern. 

Taking once again the yellow and green card-stock, die cut the Aloha so this forms also a chipboard tittle. Adhere all the layers together then to the card front. Apply the crystal lacquer to the top layer to finish the card. Put aside to dry.

Other Products: Neenah Papers White and Green cardstock, Rangers Distress Mini Pads (Forest Moss, Mowed Lawn), white Foamiran, hot glue gun, Scrapbook Adhesive tape runner. 

Watch this tutorial https://youtu.be/KOy_qNB9OAk to learn how to shape the Classic Petunia.

Instructions: Trim a piece of white cardstock to 6 1/2” x 9”, fold in half to create 6 1/2” x 4 1/2” card base. Cover card base with Classic Petunia paper collection. Cut a front card panel from paper collection, mat with green cardstock and then adhere to card base. 

Stamp multiple Petunia flowers and leaves onto white Foamiran with chalk ink. Die cut with coordinating Petunia dies. Color flowers with chalk inks and daubers. Shape flowers with Deluxe Flower Shaping Kit, layer petals and glue on card as pictured. Embellish center of flowers with Prills. Die cut vines from the Cut Mat Create die set using green cardstock and then glue under flowers.

Other Products: Distress Inks; dusty concord; Mowed Lawn; Vintage Photo; Foam Adhesive; canson water paper; Rock Candy Crackle; Coffee Archival Ink; Pollens; white card stock; hole punch; we are memories tag punch; corner rounder; seaming binding; heat tool; album rings; May arts ribbon and gold thread.

Watch this video https://youtu.be/KOy_qNB9OAk to see how to shape the Classic Petunias.

Instructions: I first create two folders by cutting papers from the collection and using my scor pal. Measuring 5.5 x 9.5" and scoring them in half, I cut papers in the collection to match the size and add to inside of the folders and add additional journal cards and photo mats to create about 15 pages worth. I put all papers together and use my crop o dile to punch holes so I can add some rings. I punched out tabs using the We R memory keepers tab punch and ink with dusty concord. 

I stamped and cut a set of the large petunias, and a set of the small petunias for the cover along with leaves. I stamped and cut the corner part from the Bouquet die, I colored all the leaves with mowed lawn and the flowers I used dusty concord. Following Emma Lou's video I created my petunias and added stamens. I used the frosting powder and crystal clear to detail my flowers. I colored the seam binding using the reinker and placing it in a bag to color it. I then heat set it to dry to the seam binding will wrinkle. I then cut a journal card for the cover to create a small flip; and I have flips throughout this mini Folio. Attach your album rings and add some ribbon. Wrap ribbon around the entire folio and add some gold thread. Complete as shown.

Other Products: Purple cardstock, trimmer, hot glue gun, heating tool, double sided tape, mini mister, Ranger Crackle Paste, X-Press It blending Card Stock, Copic Markers (Flowers - BV00, BV11, BV17 and Leaves - G99, G93, YG65, YG61). Dimensional Mounting Tape. 

Instructions: Create a 5 1/2 x 5 1/2" top-fold card from heavy white cardstock. Cut purple base layer at 5 1/4 x 5 1/4". Select the designer paper from the Classic Petunia Collection and cut to 5 x 5". Adhere the layers with double sided tape.

 Cut two Regal Border and Pocket Die from white cardstock and apply to the designer paper as shown in the picture. 

Stamp the Petunia Bouquet and both the large and small Classic Petunia petals on X-Press It Blending Cardstock using Elderberry Ink. Color the Petunia Bouquet with Copic BV00, BV11 and BV17. Color the leaves with G99, G93, YG65 and YG61. Die cut the image and 3 extra Petunia Bouquet from the purple cardstock and adhere to them using Dries clear Adhesive for strength and dimension. 

Sponge the Petunia petals with Elderberry Ink using Stack and Store Daubers. Sponge the green leaves with Memento Bamboo Leaves. Die cut the flowers using the corresponding die. Shape the petunia petals and leaves using the Deluxe Flower Shaping Kit. Add yellow Prills to the flower centers using Dries Clear Adhesive. Add a thin amount of Dries Clear Adhesive to the Petunia Bouquet petals and sprinkle with Crystal Clear glitter. Allow to air dry. Apply a small amount of Crackle Paste to the large and small petunia, sprinkle Frosting Powder and heat set. The longer the heat is applied, the more it puffs up. Adhere the layers with a hot glue gun and dimensional mounting tape. 

Other Products: Paper: Neenah Solar White, 12" x 12" White; Ink: VersaFine Onyx Black; Accessories: half pearls, cheesecloth, Clear Wink of Stella, water mister, mineral spirits, paper stumps, Prismacolor Pencils: Deco Pink, Mulberry, Dahlia Purple, Dark Purple, Page Sage, Prussian Green, Lavender Lace, Parma Violet, Violet, Dioxazine Purple Hue

Instructions: Card measures 6" x 4 1/4". Cut white cardstock 12" x 4 1/4", score at 6" and fold to make card base. Stamp sentiment from Small Classic Petunia Set on lower right with black ink. 

On Solar White with Onyx Black Ink, stamp large flowers and leaves from Large Classic Petunia Set and medium flowers and leaves from Small Classic Petunia Set. Color with pencils and mineral spirits using paper stumps. Die cut with matching dies from the Small Classic Petunia Die Set and Large Classic Petunia Die Set. Shape flowers and leaves by misting the backs with water and shaping with the Deluxe Flower Shaping Kit. Adhere three of the flowers to leaves using Designer Dries Clear Glue. 

Cut a piece of cheesecloth and shape and pull as desired. Place cheesecloth on card as shown and glue flowers/leaves over it using Designer Dries Clear Glue. Shape and trim cheesecloth as desired. Add Minnie Pearl Prills to pink flower centers and Lavender & Lace Prills to the violet flowers using Designer Dries Clear Glue. Brush flowers with Clear Wink of Stella and then sprinkle with Shell White Glitter. Add adhesive pearls to top right.

Other products: Cut File, White Card Stock, Green Card Stock, Purple Card Stock, Yellow Card Stock, Archival Ink Watering Can, Brilliance Ink Pearlescent Thyme, Darice electric candle and die cutting machine.

Watch this video https://youtu.be/KOy_qNB9OAk to see how to shape the Classic Petunias.

Instructions: Click here to see a close up view of this light post. Start by assembling the Lamp Post according to the directions found here using paper from the Classic Petunia Paper Collection for the panels. The Petunia flowers were stamped on White card stock with Watering Can and die cut with the matching die and colored using the Stack and Store Daubers and Wisteria ink before shaping with the Flower Shaping tool and accented with stamens with Prills. The flourish was die cut from Cut Mat Create 2A using green cardstock and the leaves were stamped on white card stock with Watering Can ink and die cut with the matching die and colored using the Stack and Store Daubers and Pearlescent Thyme before shaping with the Flower Shaping tool and attaching as shown.

Other Products: Vellum, Wilted Voilet Shabby Shutters, Peeled Paint Distress Ink, White Embossing Powder, Heat embossing tool, Glitter, Ribbon, Purple Card, White Card, 3d foam pads 

Instructions: Take some purple card stock and Purple patterend paper from the Paper collection and cut to 8 x 8". Ink edges with Wilted Voilet Distress ink. Wrap Ribbon around opposite corners, matte and Layer. Take the 6 x 6 coordinating panel, distress edges with Wilted Violet and mat and layer onto purple card. Glue into center of card with 3D Foam pads. Cut out Ornate Borders and Pockets and underneath your main topper panel. Add Sentiment. 

Stamp flowers in white ink onto vellum and use white embossing powder and heat gun to emboss. Diecut flowers with coordinating dies. Stamp leaves onto white cardstock and diecut. Color leaves using the Peeled Paint Distress ink. Color the flowers using Wilted Violet distress ink. Shape flowers and leaves. Use hot glue to add to card. Add Bow to bottom corner. 

Other Products: Iron Bell, Multi Medium Matt, heat gun, dimensional adhesive, Glue Gun, Glossy Accent, scissors, heat tool, Distress inks- Dusty Concord, Archival Black, Pine Needles

Watch tutorial in the link to see how to shape the petunias https://youtu.be/KOy_qNB9OAk.

Instructions: Click here to see a close up view of this bell. Start by stamping multiple set of petunias from Small and large Classic Petunia using archival ink and pine needle for the leaves. Using the coordinating dies, die cut all the stamped images. Use the Stack and store daubers to shade the flowers using distress ink Dusty Concord. Finish the flowers by stacking each other and lay it flat and add prills at the center.

Stamp and die cut the petunia classic bouquet using archival ink. Water color the images using distress ink. Place the colored petunia bouquet on the rim of the bell using hot glue. Place the shaped petunias, leaves, stamen as desired in and around the bell structure to complete the composition. To finish apply glossy accent to the bouquet and the flowers and sprinkle some frosty powders.

Other Products: Cutting file Big card Dreaming Tree, White Cardstock, Spellbinders label, Glitter Glue, Spectrum marker PL4, Versafine black, Paper pen purple, Distress ink: Dusty Concord, Picked Raspberry

Watch this video https://youtu.be/KOy_qNB9OAk to see how to shape the Classic Petunias.

Instructions: You can find the cutting here out of white cardstock, I changed the whole card myself on my Silhouette, then I glued the card together, put some glitter glue and crystal clear on some parts, let this dry. Then I cut out a label with a spellbinders label set from white cardstock and stamped a sentiment of the collection on it. On the bottom I used a strip of the design papers also on the inside of the back panel.

Stamp the petunias and leaves in black ink onto white cardstock and diecut with coordinating dies. Color the petunias in the colors you like, I used purple tones and the small flowers are pink. Use Bamboo Leaves ink on to color the leaves. Shape flowers and leaves, then attach to card as shown. In the center of the flowers I put some dots with a purple paper pen. Use dries clear glue to add Crystal glitter.

Other Products: Lindy’s magical-hot pink, plum, rhinestone swirls, Diamond Dust

Watch this video https://youtu.be/KOy_qNB9OAk to see how to shape the Classic Petunias.

Instructions: Card base measures 5.75" x 8.5". Then another layer of cardstock measures 5.625 x 8.375". Then there is another half layer of petunia pattern paper with torn edges and on the rest of the area there is a splash of lindy’s magicals. At the bottom paste one die cut of classic border basic die. On the top right side add one die of Raindrops of roses die behind the petunia pattern paper. 

On the left side there is a composition of petunia flowers. These gorgeous flowers made from Petunia stamp and die-cuts. Stamp, color them with Berrylicious ink and some in fern green ink, diecut and shape. Diecut, color and shape stamen and attach to flower centers. Sprinkle prills and diamond dust on the flowers. Stamp, color the leaves in fern green ink, diecut and shape. Attach flowers and leaves as shown. Sentiment is added which is in the pattern paper and swirl rhinestones were added.

Other Products: White cardstock, cream cardstock, scissors, paper trimmer, die cutting machine

Watch this tutorial to see how to shape the petunias https://youtu.be/KOy_qNB9OAk.

Instructions: Cut cream cardstock to 12" x 6", score and fold at 6". Cut 6 x 6" 'Beauty In My Soul' panel from the Classic Petunia paper and attach onto card base. 

Stamp both sizes of petunias from HCPC-3786 Large Classic Petunia stamp set in Memento Lilac Posies ink (for the petunias) and Bamboo Leaves (for the leaves) onto white cardstock and diecut with coordinating dies. Stamp the petunia bouquet and petunia corner from the HCD1-7141 Classic Petunia Bouquet stamp set in black ink onto white cardstock and diecut with coordinating dies. Diecut the large and medium petunia stamen from white cardstock.

Use the Stack and Store daubers for detailed application on the images. Use Lilac Posies for the inner parts of petunias and Butter for the outer edges. Use Bamboo Leaves on the leaves and a touch of Lilac Posies. Sponge stamen with Lilac Posies ink.

Shape petunias, leaves and stamen. Attach onto card as shown. Add sentiment from the paper collection. To finish it off, use Dries Clear glue to add Lettuce Entertain You prills to stamens and a sparkle of crystal glitter to card as desired.

Other products: White Cardstock, Spectrum Noir Clear Sparkle Overlay, Green Cardstock

Watch this video https://youtu.be/KOy_qNB9OAk to see how to shape the Classic Petunias.

Instructions: Base card: Cut a piece of white cardstock 10 1/2" x 6". Score along the long side at 6" leaving the front 4 1/2" wide. Cut a piece of the patterned 6 x 6" paper at 4 1/2" and adhere to the front of the card and the remaining 1 1/2" on the right back of the card.

 Stamp the gate from the HCPC-3746 Festive Gate Cling Stamp in Espresso Truffle on white cardstock and die cut with the coordinating die. Lightly sponge the gate with Toffee Crunch and trim of the last 1 1/2" to create the gate. Adhere the gate to the front of card and the fence to the back of the card with foam tape. 

Stamp the grass from the HCPC-3772 Wlldwood Cottage Accents Cling Stamp in Espresso Truffle and sponge with Bamboo Leaves before die cutting out with the coordinating die and adhering to the front of the gate and fence.

 To make the pink flowers stamp with images from the HCPC-3785 Small Classic Petunia Cling Stamp and the HCPC-3786 Large Classic Petunia Cling Stamp with the Berrylicious ink and sponge the stamped images with the same ink. Die cut the images using the coordinating die and colour in the back with the Berrylicious ink. Shape the flowers using the HSCT1-401 Heartfelt Creations Deluxe Shaping kit.

 To make the green flowers stamp the images with the HCPC-3785 Small Classic Petunia Cling Stamp with Bamboo Leaves and sponge the centres lightly with New Sprout before die cutting. Sponge the edges of the petals with Bamboo Leaves before shaping the flowers with the HSCT1-401 Heartfelt Creations Deluxe Shaping kit.

 For the larger flowers die cut the stamens from the green cardstock and roll them up using the quilling tool in the Deluxe Shaping kit and glue together. Dab some glue on the ends of the stamens and dip into the prills and then adhere to the centre of the flowers. Add the prills to the centre of the small flowers with the Dries Clear glue. Adhere the flowers as shown on the gate and fence and on the left top corner. 

Stamp more leaves from the HCPC-3785 Small Classic Petunia Cling Stamp and the HCPC-3786 Large Classic Petunia Cling Stamp with Espresso Truffle ink and sponge with Bamboo Leaves ink before die cutting with the coordinating die. Shape, trim and add leaves to the flowers as shown. 

Cut the sentiment from the patterned paper and add to the flowers. Finally, add Spectrum Noir Clear Sparkle Overlay to the flowers.

Other products: White card stock, Light green cardstock, Ribbon, Pearls (Dark pink), Stickles (Diamond) and Multi-fine glitter, Photo

Watch this video https://youtu.be/KOy_qNB9OAk to see how to shape the Classic Petunias.

Instructions: Click here to see a close up view of this layout. Approx. 10 1/2 x 10 1/2" page size. Start with two pieces of Classic Petunia paper (cut center out of dark pink paper to be used for photo matte. Cut the dark pink Designer paper cut down to your desired page size and (using a cutter like Fiskars or similar) cut the center out of it. Cut A Wonderful Day Designer paper down to fit leaving about 1/4" border of the dark pink all the way around. Also cut around the wing of butterfly located above the banner using a craft knife. Use the center cut-out of dark pink to make a mat for your photo. Glue 5 x 7 photo to designer paper page making sure the wing of the butterfly is on top of photo. 

Stamp petunias in Lilac Posies onto white cardstock and diecut with coordinating dies. Stamp Leaves in Bamboo Leaves onto light green cardstock and diecut with coordinating dies. Sponge flowers with Rosebud ink. Shape flowers and leaves using the Heartfelt Deluxe Flower Shaping Kit. Die cut Decorative Blossom Corner using very light green card stock and glue it to the top right corner of the page and photo. Attach all the flowers and leaves to top and bottom of page as desired and add bows and ribbon tails to make a fluffy bed of light green for the flowers to "sit" in tucking them in around and between flowers and leaves. Add glitter or Stickles to flowers and butterfly wings.

Other products: Scrapiniec Chandelier - laser cut chipboard, white pearlised cardstock, green cardstock, 3D foam tape, Foamiran, waterproof black pigment ink, pink pigment ink, dark green alcohol ink, white glitter, floral stamens, floral mini berries, hot glue gun, liquid glass, magic glue, self-adhesive mini gems

Instructions: The ready top fold card measures 5 1/2 x 5 1/2" white pearlised paper card base. Select the designer paper from the Wildwood Cottage Paper, cut at 5 1/4 x 5 1/4". Die cut Delicate Border from white pearlised paper. Cut another layer Wildwood Cottage Paper cut at 4 1/8 x 5 1/4 inches, use Border to draw line to match shape to border and cut it out and use dimensional adhesive to attach onto card.

To make the pink flowers stamp the flowers from the Classic Rose Cling Stamp Set into white foamiran with black permanent waterproof ink and sponge the stamped images with the pink pigment ink before die cutting with the coordinating die. Use iron or heat gun to shape flower using your fingers, floral pink stamens. Sponge the petals with clear quick drying liquid glue, sprinkle white glitter.

To create leaf stamp with green alcohol ink into green paper and cut with the coordinating die and sponge the edges of the stamped leaf’s to create natural shadow. Shape leaves.

Decorate the Chandelier laser cut chipboard with Self-adhesive mini gems. Place Chandelier using dimensional adhesive to attach onto card. Arrange the flowers and leaves over the Chandelier. Glue it using hot glue gun. Decorate with purple floral mini berries. Use Liquid glass to create rose drops.

Other Products: White cardstock, dimensional adhesive, water mister, scissors, paper trimmer, die cutting machine

Watch this tutorial to see how to shape the petunias https://youtu.be/KOy_qNB9OAk.

Instructions: Cut white cardstock to 8 1/2" x 5 1/2", score and fold at 4 1/4". Cut green patterned paper from the Classic Petunia paper to a 4 1/4" x 5 1/2" size. Cut the A2 card front from the same paper collection. Use the 2nd largest rectangular die from the Cut Mat Create 1A to diecut center from card front. Use the border as a template along with the Cut Mat Create die, to diecut opening from center of green panel and card base. Sponge edges of green panel with Lime Pastel ink. Attach green panel and border panel directly onto card as shown. Use dimensional adhesive to attach center panel through opening of card at an angle as shown. Find sentiment in the Classic Petunia paper, sponge edges with Berrylicious ink and attach onto card as shown. 

Stamp the small set of petunias from HCPC-3785 Small Classic Petunia, large petunia bouquet from HCPC-3787 Classic Petunia Bouquet, and largest petunia set from HCPC-3786 Large Classic Petunia stamp set in Memento Tuxedo Black ink onto white cardstock and diecut with coordinating dies. Use the Stack and Store daubers for detailed application on the images. Use Lime Pastel and Guacamole to color the leaves. For petunias use Rose Coral/Berrylicious and Berrylicious/Dark Peony in alternate combinations. Use darker shading in the petunia centers. Dab a bit of the Gold stamp paint onto a non-porous surface such as clear cardstock, spritz with water to dilute and mix. Sponge the mixture onto the leaves. Make another stamp paint mixture, this time with the Magenta stamp paint. Sponge mixture over the petunias. 

Shape petunias and leaves. Using from the Sunrise Lily die, diecut 1 large and 1 small flower base and glue each one into a cone shape. Fill each cone with glue and press shaped large petunia into large cone and small petunia into small cone. 

Attach petunia bouquet, petunias and leaves onto lower right of card as shown. To finish it off, use Dries Clear glue to add a sparkle of crystal glitter.

Other products: Paper trimmer, ribbon and Stampin Up ink in Melon Mambo, Early Espresso and Garden Green,  glue dots, pearls, scallop oval punch 

Instructions: Inspiration and step by step pictures for this project comes from: Hot Off The Press 3D Frame Card Template and here

To make the basic frame card, cut one piece of white cardstock to measure 6″ x 8″ in size and a second piece, 12″ x 6″, folded in half down the center to create a 6″ square card blank. Take the 6″ x 8″ piece of card and place in front of you, with the longest side facing you, score the frame at 0.5″, 1″, 7″ and 7.5″ and fold along the score lines. To create the aperture in the center, measure 1″, 1.5″, 4.5″ and 5″ from the second score line on the left hand side and make a faint pencil mark. Turn the card around 90˚ and then measure again t 1″, 1.5″, 4.5″ and 5″ and mark with a pencil. Join up all the pencil marks to form a square and core along each of the solid lines. Cut diagonally from corner to corner of the scored square to create four triangular flaps in the center. Create a mountain fold, followed by a valley fold along each of the score lines to create your inset to your frame. Apply adhesive tape to each of the end tabs of the scored card. Mount the frame onto the front of your 6″ x 6″ card blank. Add adhesive to each of the four flaps on your frame and attach them to the blank card to form the box. Cut a piece of white card, approximately 4 1/4” square and place in the center of your frame card and you now have your basic frame card to decorate. Cut one classic border basic die and glue across the top of the frame card.

Stamp the petunias with the classic petunia bouquet cling stamp set. Cut the petunias out with the petunia bouquet out with the classic petunia bouquet die. Color the petunia bouquet with Stampin Up melon mambo and garden green ink with the dove blending pen. Apply designer dries clear adhesive and apply shell white microfine transparent glue to petunias. Punch a scallop oval from white cardstock and stamp with Stampin Up early espresso ink “Let’s Celebrate” from the small classic petunia cling stamp set. Attach the petunia bouquet with glue dots and glue the scallop oval to the bottom of the card. Attach pearls around the frame of the card.

Other products: VersaMark Ink, Spellbinders Fancy Lattice Die, White cardstock, Rose cardstock, dimensional tape, Sheer Shimmer Spritz Sparkle

Instructions: Create a white A2 tent fold card base. Add a rose mat 4” x 5 1/4”. Cut the card front from the Classic Petunia Paper Collection and ink the edges. Using the Cut Mat Create die cut out the center of the card front. Using white card stock, die cut the Fancy Lattice and adhere to the back of the card front with Dries Clear Glue. Adhere the card front to the base using dimensional tape. 

Stamp the Petunia Bouquets with VersaMark and heat emboss with gold embossing powder. Color using the Stack and Store Daubers and add glitter. Adhere to the card front using dimensionals. Cut small Hummingbird from the Botanic Orchid Paper pad, shape, spray with Shimmer Spritz, glitter and attach to Bouquet. Cut another panel from the designer paper, ink the edges and add to the inside of the card. 

Other Products: White and Burgundy Card Stock

Instructions: Begin by making a 5 x 7" card base with white card stock. Top it with a piece of Burgundy 1/8" smaller. Cut a pink piece from the Classic Petunia paper, sponge around the 4 sides with the Orchid ink and adhere to the card. Cut 2 card fronts from the paper pad and one piece from the back side that is a bit larger. Mount all 3 on burgundy card stock, add D-Dots to the largest one and angle it slightly to the right as shown, follow suit with the other 2 as in the picture. 

Stamp all the leaves and flowers on white card stick with Black Memento ink, color the leaves with the Bamboo Leaves and the flowers with the Pearlescent Orchid. Cut out, shape and adhere to card. To finish add glitter and Crystal Drops and shown.

Other Products: Cardstock (white, green), Stampin' Up Ink (Early Espresso, Always Artichoke, Calypso Coral), Beads, Gems, Glitter, Scrapbook Adhesives by 3L (EZ Runner Grand, Crafty Foam Tape, 3D Foam Squares, Glue Pen, Adhesive Dots)

Instructions: Click here to see a close up view of this layout. The orange patterned paper is your background. Cut 5 pieces of white cardstock that are 1 x 6.5". Adhere these in the middle of the layout using 3D foam tape, wit a little bit of separation between each. Cut 2 pieces of white cardstock that are 0.75 x 5.5" and adhere these across the top and bottom of the strips you already places, again using 3D foam tape.

 I matted my photo in white and then green cardstock and adhered it to the layout using 3D foam squares. 

Stamp and die cut 2 sets of the Classic Rose leaves, 1 set of the smallest Classic Rose flowers, and 1 set of the medium Classic Rose flowers. I added colour to my leaves and flowers using ink and daubers. Shape your flowers and leaves. I added beads to the middles of all of the flowers using 3D Crystal Lacquer. Let dry. Using a glue pen, add glue to the tips of all of my petals, and then sprinkled them with glitter. I layered and assembled my flowers and added them to the layout using adhesive dots. Then I added the leaves. As usual I cut these leaves apart and adhered them separately. 

Other Products: Ivory Card Stock, Spellbinders Stately and Standard Circles Die, Memento Grape Jelly, Small Foam Dots, Spectrum Noir Markers, LG4;LV1

Instructions: Prepare a Ivory Card Base 5 1/2 x 7". Top a piece of Green from the Classic Petunia Paper collection 5 1/4 x 6 3/4" after sponging all 4 sides with the Ivy ink. Cut both sides of another piece of Ivory card stock using the Border Essentials die, put D-Dots on the back and adhere to the card. Cut a piece of purple from the paper collection and adhere to card. Cut a Ivory circle out using the Stately die and top a piece of Green on top after cutting it out with the standard circle die. 

Stamp the vine, leaves and flowers on Ivory with the black ink, color the flowers with the Orchid, the leaves with the Ivy and the Vine with Spectrum Noir Markers. Cut out, shape and adhere to card. Cut the tag out using the Luggage and Tag die, add small foam dots to the back and add to the card. To finish add Glitter, White and Green Crystal Drops.

Other Product: Neenah White Card; Black Card stock; Glue Gloss; Distress Marker in Pumice Stone;. Distress Inks Peeled Paint; Vintage Photo; Foam Adhesive; Pollens

Watch this Video on how to create the Classic Rose here

Watch this video to see how to use the Border Essential Dies link here

Instructions:  Click here for a close up view of this foldout card. Using the Fleur border basics die cut out papers to cover the fold out cards. Cut the Regal Border die on paper from collection and then a black shadow using the edge die to match as shown. Attach to the back of the top of the card. Diecut plain borders on pattern paper. Diecut Fleur borders on white cs then attach to fold out card as shown. 

Using the luggage and Tag die, cut out three tags from tag sheet and cut white mats as shown. Diecut the Medallion die and attach to right side of card as shown. Place the wedding bells tag on this and cut out an extra border to cover on an angle as shown. Stamp and cut out the wedding heart and the wedding bells, color as you wish.  Stamp and cut out 8 sets of the classic rose flower. 

Stamp 6 mini roses in vintage photo, diecut and color with rose coral ink. Create three single flowers and add pollens. Stamp and diecut four sets of Classic Rose Vine using Vintage photo ink. Color the vines using peeled paint distress ink. Mold and cut apart into three smaller vines. Stamp, diecut and color the Wedding Bells, and Rose heart using same colors as previous images.

Assemble your card with all the elements we have cut and  colored. Attach tags to card and add elements as shown. Cut out hugs and kisses sentiment and attach to bottom of card. Detail all the leaves and roses with Crystal clear using glue gloss. 

Other Products: Cardstock (white, kraft), Beads, Gems, Paperlicious Crystal Clear, CTMH (watercolour paints, Ink- Chocolate), Scrapbook Adhesives by 3L (EZ Runner Grand, Crafty Foam Tape, Glue Pen, 3D Foam Squares, Adhesive Dots), Water Brush

Instructions: Click here for a close up view of this layout. Cut the decorative border from both of the green patterned papers. Cut a strip of the pink patterned paper that is 7 1/2 x 12". Cut 2 pieces of the cream patterned paper that are 3 x 12". Cut 2 pieces of white cardstock that are 1 x 12" and tear one edge on each. Adhere the torn white cardstock to the sides of the pink patterned paper and adhere the cream pattern to each side. Using 3D foam tape adhere the decorative borders to the top and bottom of the layout.

Die cut 2 of the decorative medallions from white cardstock. Die cut 2 of the mats for the medallions from kraft cardstock. Adhere these together using a glue pen. Adhere these using 3D foam tape to the top and bottom of the pink patterned section of your layout. Mat your photo in kraft, white and then green patterned paper. I added kraft photo corners to the photo and adhered this to the middle of the layout using 3D foam squares.

Stamp and die cut 1 of the large heart wreath in Chocolate ink. Stamp and die cut 2 sets of the medium Classic Rose flowers and 2 sets of the Classic Rose leaves. I added colour to all of my images using watercolour paints and a water brush. Shape and assemble the flowers. I added beads to the middles of the flowers using 3D Crystal Lacquer. Let dry. Using a glue pen add glue to the tips of the flowers and sprinkle on Crystal Clear glitter. Let dry.

I cut the bottom portion of the heart wreath off and added to to the top of the matted photo using 3D foam squares. I added one of the Classic Rose flowers on top of the large rose in the original image. I added a Classic Rose and leaves on either side of the matted photo. I cut 2 more pieces of the large heart wreath, and added those in as well.

Stamp the “Bride and Groom” sentiment onto white cardstock. Tear and roll the ends of the strip of cardstock. Adhere below the matted photo using 3D foam tape. I added a small rose to the title strip. I added some gems to the borders on the top and bottom of the layout.

Other Products: White Cardstock, Canson Watercolor Paper, Spellbinders Radiant Rectangles, Dimensional Tape

You can watch a video on how to make the Classic Rose here

Instructions: My card is 4 1/4  X  5 1/2". Make card base and cover with a piece of the Classic Wedding paper collection. Diecut the medallion and glue it to the bottom of the card front. Next stamp the sentiment using Tuxedo Black Memento Ink and diecut using the Spellbinders die; use dimensional tape to adhere to the top of the card letting part of the sentiment lay above the card fold. 

Next stamp using Rich Cocoa ink, diecut and color the rose petals(Rose Coral) and leaves(New Sprout, Bamboo Leaves). Shape the flowers and leaves and set aside. When you finish shaping the rose, use Dries Clear Glue and the Frosting Powder on the edges of the flower petals. 

This product is so unusual in that you can add a little heat and allow it to remain sort of clear as I have done on this card or you can heat a little more and it will go more white. I think it just gives a very classy look to the roses! 

Now place the leaves and the rose over the medallion and adhere to your card. 

Other Products: White Cardstock , Memento Grey Flannel

Watch this video on how to create the Classic Rose here

Instructions: Create a card base by cutting a piece of card at 6” x 12”, score and crease at 6” to create a 6” x 6” card base. Cut a 6” x 6” patterned panel from the Paper Collection and adhere to the base card. Adhere the patterned piece over the base and adhere to the top of the card as shown. Diecut the semi-circular medallion patterned piece and the background in white cardstock.

Stamp the bell image from HCPC-3789 Classic Wedding Bells in Tuxedo Black and using the Stack and Store daubers colour the image. I have used Bamboo Leaves for the leaves, Pearlescent Coral for the roses and the ribbons, and Grey Flannel lightly for the bell. Shape the bell using the Deluxe Flower Shaping Kit and adhere to the card just under the medallion. Finish the bell with the 3d Crystal Lacquer. Stamp the leaves image from the HCPC-3755 Blushing Rose Stem Stamp with versamark and emboss with Aged Ivory embossing powder. Using the Stack and Store daubers colour in the leaves with Bamboo ink and then die cut the image out using the coordinating die. Shape the leaves using the Deluxe Flower Shaping kit and adhere to the front of the medallion just above the bell.  

Stamp the semi-circular image from the HCPC-3755 Blushing Rose Stamp set with versamark and emboss with Aged Ivory embossing powder. Using the Stack and Store daubers colour the leaves with Bamboo Leaves and the Flowers with Pearlescent Coral. Die cut using the coordinating die and shape before cutting in half to place on either side of the leaves at the top.

Stamp the sentiment from HCPC-3790 Classic Wedding Wishes Stamp on white cardstock with Tuxedo Black and die cut out using the small die from the HCD2-750 Cut Mat 1B Create Dies. Using Dries Clear Glue add glitter around the edge of the sentiment and adhere to the bottom of the card using foam strips.

Stamp the leaves image from the HCPC-3755 Blushing Rose Stem Stamp set with versamark and emboss with Aged Ivory embossing powder. Using the Stack and Store daubers colour in the leaves with Bamboo ink and then die cut the image. Adhere to the sides of the sentiment as shown. To make the roses stamp the images from the HCPC-3752 Classic Rose Stamp set with Pearlescent Coral and colour the images in with the Coral ink before die cutting them out. Shape using the Deluxe Flower Shaping kit and make different sizes. Adhere to the card as shown.

Other Products: White cardstock, Brown cardstock, Versamagic Tea Leaves, Aloe Vera. Pearls, Couture Creations Tied Together Embossing Folder, foam dots, Heart of Gold Prills

Instructions: Cut a piece of white card 12” x 6” and score and crease at 6” along the long side to create a base card of 6” x 6”.  Cut a piece of patterned paper 4” x 6” and adhere to the bottom of the card front. Cut a piece of white cardstock 6" x 6" and using the cutting edge from the Fleur Border Basics set cut a section out as shown. Emboss the top section using the Tied Together embossing folder (I have used the back of the embossing for a more ‘quilted’ effect). Adhere this piece at the top of the card over the patterned paper. On a spare piece of white cardstock diecut the lace edge from the Fleur Border Basics and adhere along the cut edge.

Stamp the flower image form the HCPC-3721 Sunrise Lily Wishes Stamp set using Pearlescent Coral and Tea Leaves and die cut using the coordinating die. Using the stack and store sponge daubers colour the flowers with Canteloupe and Pearlescent Coral and colour the leaves with Aloe Vera. Shape lightly using the Deluxe Flower Shaping kit and adhere along the lace edge using Dries Clear glue and foam dots.

For more information about making the Sunrise Lily flowers please click here

To make the lilies stamp the flower images from the HCP1-3720 Sunrise Lily Cling Stamp with the Pearlescent Coral ink and the leaves with Tea Leaves ink. Die cut with the coordinating die. Lightly sponge the centre of the flowers with Canteloupe and sponge the edges of the flowers with Coral ink. Shape the flowers and assemble. Using Dries Clear glue add Frosting Powder to the flowers and heat to set. Die cut the stamens in brown cardstock from the HCD1-787 Sunrise Lily Die and shape them. Add Heart of Gold Prills to the tips of the stamens using Dries Clear glue and then add to the centre of the lilies. Adhere over the bouquet image as shown. Sponge the leaves with Aloe Vera ink and sponge the edges with Tea Leaves and shape lightly with the Deluxe Flower Shaping kit and adhere around the lilies as shown.

Stamp the ‘Just for You” image from the HCPC-3354 Classic Message stamp set in Pearlescent Coral and using the arrow die from the HCD1-761 Everyday Heroes

Die set die cut the sentiment.  Sponge the edges with Pearlescent Coral and then adhere to the top right of the card as shown. Add pearls to the embossing as shown.

Other products: White pearlised cardstock, 3D foam tape

Instructions: The ready top fold card measures 5 1/2 x 5 1/2" white pearlised paper card base. Select the designer paper from the Classic Wedding Paper Collection cut at 5 1/4 x 5 1/4 inches. Stamp wishes to background using Classic Wedding Wishes Cling Stamp Set and black ink. 

Die cut both Decorative Medallion Dies from white pearlised paper. Die cut another layer using Classic Wedding Paper Collection and background die.  Layer each medallion dies onto the matching background using dimensional adhesive. Attach onto card using dimensional adhesive, with the top medallion slightly overlapping the bottom medallion.. Finally add rhinestones to medallions.

Other Products: White Card Stock,  Versa Mark

Watch this video to see how to die cut intricate dies here

Watch this video to see how to shape the Roses here

Instructions: Prepare a card base of 5 1/2 x 7 1/2". Trim a piece of the Classic Rose paper 1/8 inch smaller, distress the edges and adhere to card base. Cut 2 of the Decorative Medallions out of white card stock, glue and add the Crystal Clear Powder, set aside to dry. 

Stamp the Classic Wedding Roses wreath on white cardstock with the Frost White ink, emboss with the white powder, Diecut it and 3 others out. Stack them together making a chip board like. Very lightly use one fo the daubers and color the leaves with the Bamboo Leaves, and the roses with the Orchid. Place D-Dots on the back. 

Now adhere the 2 Medallions one at the top and the other at the bottom on the card base. Add the roses wreath in the center. Stamp the Roses on white card stock with Frost White ink and emboss with the Aged Ivory. Lightly color with a dauber using the Orchid ink. Diecut, shape and adhere to the wreath. Stamp the rings on white cardstock with VersaMark and emboss with gold powder, diecut, adhere to the bottom of the card. To finish add glitter to the Roses.

Other Products: White cardstock, dimensional adhesive, hot glue gun, heat embossing tool, paper trimmer, scissors, diecutting machine, wax paper

To see how to shape the roses watch this tutorial https://www.youtube.com/watch?v=Z8P070kC3oo.

Instructions: Cut white cardstock to 6 x 9", score and fold at 4 1/2". Cut pink paper from the Classic Wedding Collection to 4 1/2 x 6" size. Cut  6 x 6" light green card panel with medallion pattern to 4 1/4 x 6" size. Diecut eyelet oval from the center of card panel. Lay the panel on top of pink, stamp the baby's breath image in Frost White ink twice onto the top and bottom left side of oval onto the pink panel. Heat set with white embossing powder. Sponge the edges of the pink and light green panel with Coral ink. Attach the pink panel directly onto the card base. Use dimensional adhesive to attach the light green panel onto card. Diecut the medallion die from white cardstock. Be sure to use wax paper along with the die to make it easier to remove the intricate diecut piece. Attach the diecut piece onto the left side of the card as pictured. 

Stamp the wedding bells image from the HCPC-3789 Classic Wedding Bells in black ink onto white cardstock and diecut with coordinating die. Stamp the set of 2 rose petals twice from the HCPC-3752 Classic Rose stamp set in Dark Brown ink onto white cardstock and diecut with coordinating die. Stamp the 'For the Bride and Groom' message in Coral ink onto Classic Wedding paper strip. 

Use the Stack and Store daubers along with Cantaloupe and Coral to color the roses and rose petals, using a darker shading in the centers. Use Olive and Pistachio ink to color the leaves. Use Teal Zeal to color the ribbon. Use Toffee Crunch and Coral to color wedding bells. Sponge edges of message with Coral ink.

Shape rose petals and wedding bell image. Use a hot glue gun to assemble roses. Cut off the top part of the wedding bell image and use dimensional adhesive to attach both pieces onto card leaving a little space in between. Attach roses. Tuck in message behind bell as pictured. Use dries clear glue along with Crystal glitter to add sparkle over card as desired. 

Other products: Paper trimmer, string of pearls, dollar notebooks from Target, open 8 ¼ inches by 8 ¼ inches box from recycle bin, Stampin Up ink in Rose Red, Smoky Slate and Garden Green.

Watch this video https://youtu.be/Z8P070kC3oo to learn how to shape the classic roses

Instructions: This gift box with two guest books for a wedding reception could be made from items on hand. My project was made from one dollar lined notebooks and a box that was in my recycle bin the week I designed the project! For this project it was an 8 ¼ inches by 8 ¼ inches box with a 6 inch square opening in the slide off top. There was shaped plastic material inside the box which I removed before measuring and cutting decorative paper for the inside and outside of the box.

Cut and glue two pieces of decorative paper at 8 inches by 8 inches for the inside bottom of box and the bottom of the top slider box. Cut and glue 12 pieces of decorative paper at 2 inches by 8 inches to decorate the top and sides of the slider box and the four insides and two expose edges of the inside box.

Stamp, die cut and color with Stampin Up Rose Red, Smoky Slate and Garden Green the heart wreath and the big wedding bells for the Classic Wedding Bells Stamp and Die Sets. Adhere the front of the two lined notebooks with glue. On the cover box fussy cut out the bride and groom with the arch. Die cut the medallion with white cardstock. 

Stamp, die cut and color 13 classic roses with Stampin Up Rose Red, Smoky Slate and Garden Green. Place Minnie Pearls Prills in the middle of each rose. Attach medallion, bride and groom image and roses to the bottom left side of the top box with opening. Attach string of pearls around the edge of the opening in the box top.

Other Products: Heat Gun, Hot Glue, Sequins, Glitter, Glossy Accents, Score Board, Cutting Mat, ribbon, Spellbinder Die, Dimensional adhesive, scissors, heat tool, Distress inks, Ripe Persimmon, Picked Raspberry, Pine needle, Black Archival, Pine Needles

Instructions: For the base use medium weight chipboard. The final project measures 4"x 6". I inserted two magnets and two pieces of ribbon under the designer paper for a magnetic closure and a decorative ribbon closure. Cut chipboard and cover with the classic wedding coordinating paper from the paper collection. Stamp sentiment on cover using Lipstick Red ink.

For the inside use coordinating paper from the classic wedding collection and adhere the same. Use the HCD1-7144  Decorative Medallion Die and die cut several pieces (4--5) from a white cardstock. Adhere all the pieces together reserving one for the cover and place it on one side of the booklet. Only apply glue the the outside edges of medallions, this will serve as a pocket for the journalling or tags. On the other side keep the space for the photo.

Stamp the Classic Rose in Picked Raspberry ink, diecut and color using same ink as well as Ripe Persimmon. Stamp the Leaves in Pine needle, diecut and shape the leaves. The flowers and leaves are tied in a  bouquet with a net and some mesh for the cover. I Used a Spellbinder die to create a shaker space for over the sentiment. First diecut the green frames using spellbinders die (10-12 frames) and adhere together using dries clear glue creating one thick frame reserving one for the top. Then diecut on clear cardstock and a smaller dotted frame on white cardstock. 

Adhere thick over sentiment using dries clear glue and your glitter and sequins. Then adhere clear cardstock, reserved green frame and the white dotted frame. Arrange the medallion, mesh, flowers and leaves as desired. Use dries clear glue to adhere to booklet. Finally tie ribbon to create a completed look.

Other Products: 4 Toilet Paper Rolls, Piercing Tool, Flower Stamens (pink), Glue Gun, Spellbinders Grand Calibur, Momenta Embellishment, Scrapiniec Floral Stem and Frame, Cardboard, Copic Pen R83.

Watch tutorial in the link to see how to shape the rose http://bit.ly/2rhcYif

Instructions: Click here to see another view of this album. Take your cleaned up toilet rolls and flatten them. Use the bone folder to firmly crease the folds so that they are as flat as you can make them. Now measure your flattened roll to get the 'roll length' and the 'roll width' Cut a piece of patterned cardstock to be: roll length + 1"by 2 x roll width  then add on an extra 1". Now align one side of the roll with the edge of the paper and fold it over. Fold over again the remaining small piece. You will now have three panels - the top flap, the middle and bottom panels. 

Now spread some glue evenly over one side of the flattened toilet roll. Stick the roll to the middle panel. Be sure to center it. Now take a pair of scissors and cut four small wedges in the card as shown below. This will enable us to tuck in the overhanging edges easily. Spread a small amount of glue onto the overhanging edges and tuck them inside the roll and press firmly for a good 20 seconds to ensure they stick. Glue down the shorter top flap and tuck in the edges. Repeat for the remaining toilet rolls. Cover them in the same or coordinating patterned papers. 

Now cut the tags from one of the sheets of the Classic Wedding paper collection. These will fit inside of the toilet paper rolls. For the flowers cut 8 Wildwood florals one medium and small and adhere to one another staggered. Place the pink stamens in the center using your piercing tool and add some color with your copic pen. 

Other Products: Pearls, Pink Tulle, Stickles, White Linen card stock, White smooth card stock, Copic: C0, C01, C02, C03, C05, YG63, G21, G82, R81, R83,R85) Angel Pink-Memento, Bazzinks! light green  

Instructions: Card size is 6 1/4 X 5 1/4". Cut pink paper from the Classic Wedding to the card size and glue to cover folded white card. Stamp, die cut and sponge Classic Rose pieces Angel Pink ink. Stamp Classic Rose Vines and Classic Wedding Bells in black ink from smooth white, diecut and then sponge and color (the Classic Wedding Bells image is colored with Copic Markers) (leaves in Bazzinks-Light Green. Form and fashion roses and leaves using the Deluxe Flower Shaping Kit.  Add glue to tips of roses and dip into Crystal Clear for sparkle. 

Cut another ivory color print from the designer paper 5 X 6" and stamp "To A Special Couple" from Wedding Wishes on the bottom right and then glue bells toward the top. Die cut the Decorative Medallion from heavy weight white card stock and glue just the sides to the card edges even with the ivory paper to make it bend (similar to a Bendi Frame card). Glue pink roses and leaves down onto left side of card.  Add a few leaves and a rose bud to the right side as well. 

Add tuffs of pink tulle to rose bouquet and then add a few white Prills (like babies breath) around rose bouquet. To finish this card, add large pearl halves to the corners and a string of pearl halves along the top of the Medallion arch.

Other Products: Card Stock: A4 Crafters Companion Whit-hint of gold 300gm and Peach card stock, Ranger: Diamond stickles, Heat Gun, Water Mister, Inking tool, Bone folder, Water colouring brush, Scissors, Ruler, Black Archival Ink, Paper distressing tool, Distress Inks: Victorian velvet, Forest moss, Black soot, Aged mahogany, Faded jeans, Other: SUP Always Artichoke marker, Hot glue gun, Versa-mark, Fussy Cutting Scissors, Double sided Tape, Double Sided Foam Tape, Peach organza and lace ribbon, Misti, Crop-a-dile

Click  here to see the video on making the roses

Instructions: To see a larger photo of this card click  here. The finished size of this card: 8 1/8" x 7 1/2" (19 cm x 21 cm) .Taking the A4 300gm card-stock and make the card base by first making 2 folds, being 2 1/4" (6 cm) along the long side to form the foot of the card. Fold this to a hill and valley fold. Cut the card front base at 5.9/16" x 6.12/16" (14. 2 cm x 17. 1 cm) The card slider at 2.10/16" x 4.1/2"(6. 7 cm x 11. 5 cm . To find a photo tutorial on how to put this card together visit my blog at sussipoppins.blogspot.com

Cut the peach card stock as matting a little smaller for the card-background, card-front, card-foot and card slider. Do the same for the design paper. Taking the paper-distressing tool, distress all the edges of the design papers.

Make the tag by taking the out side die of the half round medallion lace die and use it to cut the top for the tag background. Where the die stops cut both side straight. The tag when finished measures 4" x 5.1/2" (10. 2 cm x 14 cm) Taking the other lace die in the same set, use this to make the tag head. Trim away any excess at the top of the tag once adhered together. 

The paper lace is die cut from the white card-stock then inked with Victorian velvet, then stamped with black archival ink using the small rose heart from the Classic wedding rose stamp set. Make a hole for the ribbon using the crop-a-dile. Insert the organza ribbon in the hole and make a loop. Stamp the sentiment using the gold embossing powder. To make the tag pocket, take the out side die of the pocket lace design and the peach card stock, cut out. Cut the lace part by doing the same as above. Adhere with the clear drying glue. Attach the double dots to both outside sides and foot of the back of the pocket ready to adhere later. Put aside. Adhere the card-stock and design paper for the card-background in place also the slider and card-foot. 

Put the card front together by adhering the design paper to the peach card stock card-front. Apply double sided tape to all sides except the top part of the card front peach card stock layer, as this will be the opening for the slider. Adhere, now to the white card-front base. Adhere the slider to the centre top of the card background. Slide the slider into the card front opening. With the double sided tape and wet glue adhere the card front to the card foot. Adhere the peach ribbon lace across the foot of the card where the tag pocket ends. (this was done with the hot glue gun) Stamp in Archival Black ink, colour, die cut and shape the Bride and groom image, the roses and at least 6 leaf swirls. 

Arrange the swirls and roses across the foot of the card and head of the tag. Add a row of drops using the Nuvo crystal drops gloss white along the out side of the tag head and the lace across the foot of the card. To finish apply diamond stickles to the Brides veil and dress lace, to the rose petals and all the leaf swirls.

Other Products: Archival Ink Plum, Tea Rose, Magenta Hue, Library Green, Fern Green, Olive Green, Black, Distress Ink Rusty Hinge, Smooth Cardstock, Spellbinders Classic Circle die, Zig Clean Clear Brush Markers

Watch this video on how to create dimensional roses here

Instructions: Choose a 6” by 6” panel from the designer paper collection. Cut out the center circle using Spellbinders Classic Circle Die to form a window. Adhere an image from the same paper collection by layering it with foam tapes. Distress the edges of 6” by 6” panel using scissors and Rusty Hinge Distress Ink and layer the whole panel on white cardstock little bigger than the panel. Choose another paper and create a mat for the panel and adhere all on the card base. 

Now nest first 2 outer dies of the Classic circle together and cut 3 -4 frames. Adhere together all the frames and add the printed circle which was left from the previous window. Add a glossy accent to the frame and sprinkle Crystal Clear Powder. 

The Doves and the ring are first stamped with black archival and then painted using the shades of Peach and Blue Zig Clean Clear Brush Markers. Flower images are stamped with archival ink Plum and colored using Tea Rose and Magenta Hue. The leaves are stamped using Library green and painted using Olive and Fern Green. The shape the flower and leaves, follow Emma Lou's Video, Diecut 2 arch dies along with its base one on either side of the flower bouquet. Once all the elements are ready, assemble the card as shown.

Other Products: Peach and White cardstock, Rangers Clear rock candy, Cosmic shimmer Glitter Jewels Iced snow, Distress Inks-Shabby Shutters, Peeled Paint, Tattered Rose; Glitter Tacky Glue

Instructions: Take your White card stock and trim it down to 5 1/2 x 8 1/2". Score and fold at 4 1/4". Glue the peach cardstock (cut just a little smaller than card base) directly onto card base. Diecut the outer frame of the HCD1-7144 Decorative Medallion Die twice. Attach one on the front and one on the back as shown. Choose a card panel from the Classic Wedding paper pad and attach onto peach cardstock. Diecut the intricate medallion again on peach cardstock and adhere onto white medallion frame.

Stamp the Classic Rose Stamp Set in Tattered Rose ink onto white cardstock and diecut with coordinating die. Shape the roses as shown in video. Stamp leaves in Peeled paint ink and diecut. Color using stack and store daubers and Shabby Shutters ink. Shape using Deluxe flower shaping kit. Finally add your Iced Snow and Glitter glue onto card and attach sentiment.

Other Products: Tangelo cardstock, green cardstock, hot glue gun, double sided tape, foam mounting tape, mini mister, Misti Stamping Tool, Copic Alcohol Ink Markers (Flowers - YR0000, YR000, RY21, Leaves- YG99, YG95, HG91, YG67, YG65, YG61, C0, C1), white gel pen, White Prismacolor pencil PC938, X-Press It Blending Cardstock, Coral Distress Ink, Ranger Crackle paste

Instructions: Create a 5 1/2 x 5 1/2 inch card base with heavy white cardstock. Cut base layer at 5 1/4 x 5 1/4 inches from Tangelo cardstock. Select the apricot colored paper from the Classic Wedding Paper Collection and cut at 5 x 5 inches. The paper was covered with a light coat of Designer Dries Clear Adhesive. I used my finger to rub it on the paper. Sprinkle Frosting Powder and heat set. Apply Dries Clear glue to the grey/white leaves and lightly sprinkle with Crystal Clear Glitter. The edges were sponged with Coral Distress Ink  and distressed. Adhere the layers with double sided tape. 

Stamp the Classic Wedding Roses onto X-Press It using Desert Sand ink in order to give the flowers a "no line" appearance. Color the image with Copic Alcohol Ink Markers with the following combo (Flowers - YR0000, YR000, RY21, Leaves- YG99, YG95, HG91, YG67, YG65, YG61, C0, C1). Apply white colored pencil on the edges of the flower image to lighten the highlights. Die cut with the Classic Wedding Roses floral heart die. Cut 3-4 additional images from Tangelo cardstock only using shadow of floral heart. Stamp the sentiment from Classic Wedding Wishes on the center of one shadow layer with frost white ink and emboss with white embossing powder and heat set. Layer the shadow layers with foam mounting tape in-between each and place the colored image on top. 

Stamp Classic Rose petals using frost whie ink and emboss with white embossing powder and heat set.

Lightly sponge the  petals with Coral Distress Ink and diecut. Shape the flowers using the Deluxe Flower Shaping Kit.  Apply a light coat of Ranger Crackle Paste and sprinkle Frosting Powder and heat set. 

Stamp the leaves from the Classic Rose Stamp set on green cardstock with Memento Olive Green Ink. Sponge with Olive Green ink on the edges  and apply  a small amount of Berrylicious Chalk Ink on a few leaves. Die cut with the corresponding die, shape with the Deluxe Flower Shaping Kit and allow to dry. 

Adhere some Gold Gala Glitz to the area that will be near the dimensional flowers using Dries Clear Adhesive - (See reference photo). Adhere the leaves, flowers and Classic Wedding Rose heart using a glue gun. Emma Lou has a wonderful video for creating Classic Roses here. 

Other Products: Paper: Neenah Solar White, Recollections White, Black, Coordinations April Lovely; Ink: VersaFine Onyx Black; Accessories: half pearls, Clear Wink of Stella, Scotch Mounting Tape, mineral spirits, paper stumps, Prismacolor Pencils: Deco Pink, Hot Pink, Processed Red, Black Cherry, Metallic Silver, Black

Instructions: Card measures 4 1/4" x 6 3/16". Cut black cardstock 8 1/2" x 6 3/16", score at 4 1/4" and fold to make card base. Cut April Lovely cardstock 4 1/16" x 6", cut white cardstock 3 7/8" x 5 13/16" and glue to mats together. Add to card base with Scotch Mounting Tap. 

Stamp sentiment from Classic Wedding Wishes Set on white cardstock with Onyx Black and trim down to 2 5/8" x 4 5/16". Color hearts with pink pencils. Cut April Lovely cardstock to 2 13/16" x 4 1/2", glue to sentiment and add to card as shown using Scotch Mounting Tap.

 Stamp bell border from Classic Wedding Bells Set and rings from Classic Roses Set on Solar White with Onyx Black. Color with pencils and mineral spirits using paper stumps. Add bell border as pictured using Scotch Mounting Tape. 

Stamp rings in black ink, diecut with coordinating die and color as pictured. Adhere using Designer Dries Clear Glue. Add Clear Wink of Stella to hearts and diamond in the ring. Add adhesive half pearls to top right.

Other Products: Pink Cardstock, Gold Cardstock, Square Doily, Lace, Flatback Pearls Wedding sticker, Gems, Pearl Sticker, Heart Sticker, Pearl Pen Creme, Ribbon, Dove Embellishment, Glue Gun, Heat tool, Gold Embossing Powder, Versamark, Vellum, Sequins, Organza Ribbon, Black Versafine ink, Vintage Photo ink

Instructions: To see a larger photo of this layout click here. Take a piece of the designer paper and cut 1/4 inch off on the bottom and on one side. Take the doily and glue this on the paper little off center. Mat your photo on pink cardstock, and then on gold cardstock. Adhere directly on top of the doily. Take your lace and lay that on top of the photo on the bottom and adhere it on the back of the layout. Stamp a sentiment with the Versamark and gold embossing powder, heat emboss this and adhere it on a piece of gold cardstock, fussy cut it out and glue it above the photo.

Diecut the botanic window out of pink cardstock. Choose an image out of the designer paper, diecut using Botanic outline die. Glue this behind the window and adhere this on the right side next to the photo. Diecut a medallion out of pink cardstock and glue this under your photo.

Stamp Classic Rose flowers using black Versafine ink onto vellum and diecut with coordinating die. Color using Stack and Store Daubers using Lady Bug Red ink color roses on the back of the vellum and shape using Deluxe Flower Shaping Kit. Stamp Classic Rose Vines in black Versafine ink onto white cardstock and diecut. Color using Bamboo leaves ink, accenting with Vintage Photo ink and shape. Stamp two small rose hearts in black ink onto white cardstock, diecut, color and shape. Stamp Wedding Rings in black ink onto gold cardstock and diecut.

Adhere pieces onto layout as shown and attach sequins among vellum flowers as desired. Add pearls onto flower centers, sequins, botanic window and wedding rings. Finally finish by adding drops of the Pearl Pen to the baby's breath.

Other Products: White card stock 280 gsm, Archival Inks- Jet Black, Tea Rose, Plum, Saffron, Library green, leaf green, Peach organza ribbon, Sparkling dust powder, Zig markers-Grey, light orange and green, Spellbinders Labels One Card Front Card Creator Etched Dies SKU: S6-023 Spellbinders Nestabilities Labels One Etched Dies SKU: S4-161, Nestabilities Classic Ovals LG Etched Dies SKU: S4-110.

Watch this video on how to make the Classic Rose here

Instructions: The finished card measures 7" x 7". Cut a white card stock 6" x 6" and use the Spellbinders card creator die to cut out the front panel for the card. Adhere the die cut on a pattern paper  1/8 inch bigger than the die cut from the paper collection. Add another Mat layer in white card stock that is 1/4 inch bigger than the previous mat layer. Adhere the whole card panel on a 7" x 7" card base.

Stamp the rose image from Classic Rose collection using Saffron ink and Leaf Green ink and diecut with coordinating die. Colour with the archival inks Tea Rose, Saffron, Leaf Green and shape on the flower shaping tool. Stamp the leaves in Library Green archival ink, diecut and colour using Library Green ink and Leaf Green ink. Shape on the flower shaping tool kit. Stamp the couple's image in black ink and colour with Zig markers. Diecut with coordinating stamp ans shape as desired. Add sparkling dust to the roses. Stamp sentiment in black ink and cut shape as desired using scissors, mat that and cut that as desired as well.

Diecut the spellbinders labels die cut frames and ovals in white card stock, apply designer glue and add sparkling dust on the top. Score the base of the centre die cut on the score board at 1/8th inch interval. Adhere the two die cuts as shown. Add the figure on the top, followed by the oval frame. Arrange the flowers and leaves adding flower pollens and Mini pearl prills. Add the sentiment and ribbon bow.

Other Products: Spellbinders Classic Circles Die; ColorBox Chalk Ink - Gray Whale; Brilliance Ink - Starlite Silver and Pearlescent Rust; VersaMagic Chalk Ink - Pink Grapefruit; Want2Scrap 72 Count - Gray; Want2Scrap 72 Count - White Pearls; Art Glitter Ultrafine Transparent Glitter - Salmon and Angel Dust; Art Glitter Ultrafine Opaque Glitter - R2

Instructions: Begin by creating a A2 card out of White Cardstock. Next cut an A2 card panel from the Classic Wedding Paper Collection and die cut the center using the Spellbinders Classic Circles Die. Sponge edge of Classic Wedding card front with Olive Grove Memento Ink and then adhere to the card base with pop dots. 

Use reverse die cut circle so that the silver foil paper side is showing and adhere die cut circle directly to the card base with Dries Clear Adhesive. Sponge edge of sentiment with Gray Whale Chalk Ink and adhere to card as shown with pop dots. 

On White Cardstock with Tuxedo Black Ink stamp the rose petals using the Classic Rose Cling Stamp Set, stamp the bell image from the Wedding Bells Stamp Set and stamp the ring from the Classic Wedding Roses Cling Stamp Set. Die cut all with coordinating dies. Using Stack and Store Daubers, Fantastix and Tombow Blender as needed, color leaves on the bell with Olive Grove and Pistachio Memento Ink and then add Pearlescent Olive Brilliance Ink. Using Stack and Store Daubers, Fantastix and Tombow Blender as needed, color the rose on the bell and the rose petals with Pink Grapefruit VersaMagic Chalk Ink and then add Pearlescent Rust Brilliance Ink to the centers of the petals. Color the ribbon with Canteloup Memento Ink. Add Gray Whale Chalk Ink to the bell and wedding ring for shading and using the Tombow Blender add Starlite Silver Brilliance Ink to the accents on the wedding ring and bell. Shape ring, bell image and roses petals with the Deluxe Flower Shaping Kit. 

Adhere all to card with Dries Clear Adhesive and pop dots as needed. With Dries Clear Adhesive add Salmon Glitter to the die cut roses and to the roses on the bell, add Angel Dust Glitter to the ring and bell and add R2 Hologramphic Silver Gltter to the diamond on the ring and to the bell, as desired. Finally, adhere the Gray Pearl and White Pearl to the upper left hand corner of the card front, as shown.

Other Products: Archival ink- orange blossom, cardstock, versamark, Glass glitter, Guitar, Acrylic colour-portrait pink, Beads, Chipboard, hot glue

How to shape classic rose, check here https://www.youtube.com/watch?v=WhvG0Ajn1Qw

Instructions: Chipboard size 12”x 12”. Choose Classic Wedding Designer paper and attach onto chipboard using dries clear glue. Diecut 5 Decorative Medallion Die on cream cardstock and then attach 2 to top of pattern paper. 

Alter guitar by painting with gesso and acrylic colour and applied ruste paste randomly and then final touches were given again with acrylic colour and at some add glass glitter and beads where desired on guitar. Attach three more medallion die at the bottom of guitar and add photo. Attach Guitar onto 12" x 12" base using hot glue.

Diecut sentiments using coordinating dies. Stamp doves and leaves in Dark Brown ink. Diecut, color and shape using Olive Pastel ink and Deluxe Flower shaping kit. Stamp Rings and Roses in Archival Orange Blossom ink and diecut using coordinating die. Color roses using same ink along with Cantaloupe ink and shape.

Add Crystal Clear powder to flowers and leaves, allow to dry. Arrange as shown, then attach using dries clear glue.

Other Products: White cardstock, Spellbinders Classic Ovals Lg, dimensional adhesive, heat embossing tool, paper trimmer, scissors, diecutting machine, wax paper

Instructions: Cut white cardstock to 11 x 4 1/4", score and fold at 5 1/2" to make the card base. Use the largest Spellbinders oval die to cut opening from the center of card base. Be sure to use wax paper along with the die to make it easier to remove the intricate diecut pieces. Attach the diecut pieces onto the top left and bottom right of the oval at an angle. Use scissors to cut off the parts that overlap into the oval.

Stamp the wedding bells from the HCPC-3789 Classic Wedding Bells Cling Stamp Set in Teal Zeal ink twice onto white cardstock and diecut with coordinating die. Stamp 1 small poinsettia set and 2 extra small poinsettia sets from in Black ink onto white cardstock and diecut with coordinating dies. Also stamp 3 small poinsettia sets in Dark Peony ink onto white cardstock and diecut with coordinating dies. 

Use the Stack and Store Daubers along with the following inks to color the images. On the 1st bell image use Teal Zeal. For the fine details on bell use the Dove Blender pen to apply the color. On the 2nd set of bells use Berrylicious on the roses and ribbon. Use New Sprout for the leaves. Color 3 small poinsettias with Berrylicious ink in the centers and Chambray on the edges. For the remaining poinsettias use Teal Zeal on the edges instead of Chambray. For the leaves use New Sprout and then a touch of Teal Zeal on the edges. Use the Deluxe Flower Shaping kit to shape the bell, roses, poinsettias and leaves. Cut off the ribbon, roses and leaves from the 1st bell image and use dimensional adhesive to attach onto the 2nd layer of bells. Attach bells, poinsettias and leaves onto card as pictured. Cut a sentiment strip from the Celebrate the Season paper collection. Cut a V into the left of sentiment and sponge the edges with Teal Zeal ink and attach onto card. Sponge Dries Clear glue randomly over diecuts and card base, sprinkle with Frosting powder and heat set. Use the glue to add Minnie Pearl prills to the centers of poinsettias and a touch of Crystal glitter on the bell.

Other Products: Seedless Preserve, Dusty Concord, Peacock Feathers, Worn Lipstick, Forest Moss, Squeezed Lemonade & Black Soot Distress Inks, Ebosser, Martha Stewart scoreboard, white cardstock, pollens, rhinestones, pearls & adhesive.

Project Instruction: Cut a piece of 6" x 6" pattern paper from Blushing Rose Paper Collection and adhere it on a same sized card base. Take a 4 1/4" x 5 1/2" white cardstock & ink it's borders with Black Soot Distress ink. Cut a piece of 4" x 5 1/4" pattern paper from Blushing Rose Paper Collection and adhere it on the inked cardstock. Cut a piece of 5 1/4" x 3" pattern paper from the same collection & die cut one edge with Classic Border Basics Die. Ink the edges with Black Soot Distress ink & adhere it on the previous panel. Die cut a piece of white cardstock using Decorative Medallion Die, ink it with Black Soot Distress ink & adhere it on the previous panel as shown. Adhere this on the card front using foam adhesive.

Stamp the flowers from  Classic Rose Cling Stamp Set using Seedless Preserve, Dusty Concord, Peacock Feathers, Worn Lipstick & Squeezed Lemonade Distress Inks. Stamp the leaves from Small Classic Petunia Cling Stamp Set & Large Classic Petunia Cling Stamp Set using Forest Moss Distress Ink. Die cut them using matching dies from Classic Rose Die, Small Classic Petunia Die & Large Classic Petunia Die. Ink them using the same colors and  Stack and Store Daubers. Shape them using Deluxe Flower Shaping Kit. Add pollens to the flower centers.

Arrange and adhere all the flowers & leaves as shown. Add some rhinestones & pearls to the die cuts to add finishing touch to the card.

Other Products: Pink Card Stock, White Card Stock, Versamark, Fine Black Embossing Powder, Dervent Water Color Pencils (Crimson Lake and Mineral Green), Waterbrush, Silver Gel Pen, Paperlicious Crystal Clear and die cutting machine

Instructions: Start by taking the largest Pocket and Flipfold Inserts B - Black and place it with the 2 smallest sections on the bottom facing you. Using the Classic Border Basics Die, die cut the top most panel as close to the top as possible.

Next starting from the bottom, glue a magnet centered left to right and top to bottom in the bottom section and then fold over and glue the entire bottom section to the second section sandwiching in the magnet. Take 2 pieces of pink card stock measuring 2" x 1 3/4" scored at every 1/4" mark with the 2" side on the left of your scor-pal and fold like an accordion. Glue 1 edge of each accordion to each side of the doubled panel and apply glue to the other side of the accordian and fasten to the next panel forming a pocket. The next panel will also be doubled. Accomplish this by folding on the score line and gluing back to back to form the doubled panel. 

Now it is time to form the second pocket. Using the same process to form the first pocket, repeat but increase the size of the paper required to 3 1/4" x 2". 

To finish off the clutch purse, cover both the inside and outside with decorative paper from the Classic Wedding Paper Collection ensuring that you sandwich in another magnet between the Flipfold Inserts and the decorative paper on the front of the purse. 

The flowers were stamped on white card stock with Versamark and heat embossed with Fine Black Embossing Powder and die cut with the matching die before coloring with water color pencils and a water brush, finally shaping with the Flower Shaping tool. The leaves were stamped on white card stock with Olive Grove ink and die cut with the matching die before distressing with Bamboo Leaves. The garland and heart wreath images were stamped on white card stock with Versamark and heat embossed with Fine Black Embossing Powder and die cut with the matching die before coloring with water color pencils and accenting with a Silver Gel Pen and Paperlicious Crystal Clear.

Other Products: Pearl White Metallic Cardstock, white cardstock, Brilliance Pearlescent Ivy Ink Pad, VersaMark, Silver Embossing Powder, heat hun, Distress Clear Rock Candy Crackle Paint, Misti, Big Shot, small wooden box, sandpaper, white acrylic paint, Mod Podge, lace trim, paint brushes, dimensionals, hot glue gun 

Instructions: Sand and paint a small wooden box inside and out. Cut the paper from the collection to cover the front, sides, back and top of the box. Mod Podge the entire box and adhere the paper.

Stamp the rings with VersaMark on pearl white cardstock, emboss with silver embossing powder and heat emboss. Shape and adhere to the front of the box with 3D dimensionals. Cut the lace trim to fit and adhere with the hot glue gun.

Watch this video https://youtu.be/Z8P070kC3oo to learn how to create dimensional roses with the Classic Rose Collection.

 Stamp the roses on white cardstock with Pearlescent Poppy Ink, color with Pearlescent Coral and highlight with Pearlescent Poppy. Die cut with the matching die and shape using the Deluxe Flower Shaping Kit. Stamp and color the rose vines with Pearlescent Ivy ink, die cut with the matching die and shape using the Deluxe Flower Shaping Kit.  Paint the roses and vines with Distress Crackle paint and glitter with Rajni Chawla’s Crystal Clear. When they’re dry adhere to the top of the box using a hot glue gun.

Other Products: White Cardstock, Dimensional Adhesive, Art Institute Diva Gold Glitter, Scissors, Paper Trimmer, Die Cutting Machine

For more tips on creating with this collection watch the tutorial at here.

Instructions: Cut white cardstock to  6 x 9" size, score and fold at 4 1/2" to create the card base. Cut 6 x 6 card panel from the Beary Fun Retreat paper collection to 4 1/2 x 6" size. Stamp the Happy Birthday in Tuxedo Black ink onto the top part of panel. Sponge edges of panel lightly with Tangelo ink and attach directly onto the card base. Using from the HCD1-7120 Fleur Border Basics, diecut opposing borders from 2 1/4 x 6 and 1 1/2 x 6" pieces of green paper to create 2 small opposing hills. Sponge the edges of the hill panels with Tangelo ink and use dimensional adhesive to layer onto top of each other onto the card.

Stamp the aspen trees from HCPC-3766 Woodsy Treescape, bears and fire from HCPC-3797 Beary Fun Retreat stamp set in Tuxedo Black ink onto white cardstock and diecut with coordinating dies. 

Use the Stack and Store daubers along with the following inks to color the images. Use a Dove Blender for blending and fine details. For the trees, use Tangelo, Rhubarb Stalk and Cantaloupe. Use Cantaloupe and Rich Cocoa on the tree trunks. For the grass use New Sprout, Olive Grove and Cantaloupe. For the guitar strumming bear, use Peanut Brittle and Potter’s Clay ink. For the small bear, use Peanut Brittle and Rich Cocoa ink. Use a soft touch of Rhubarb Stalk on bears' cheeks, tongue and bottom of paws. Use Rich Cocoa on bear’s nose. For log and stump use Potter’s Clay and Rich Cocoa. Use Peanut Brittle on the s’mores sticks. For the fire flames, use Cantaloupe and Tangelo. Use Potter’s Clay, Cantaloupe and Rich Cocoa on the stones and firewood.

Before attaching bears, dab some Peanut Brittle onto card to create the illusion of ground where you’ll place them. Shape everything and use glue and dimensional adhesive to attach onto card as pictured. Use Dries Clear glue to add a touch of gold glitter onto card as desired. Attach a touch of Crystal Lacquer onto bears eyes.

Other Products: Art Glitter Ultrafine Transparent Glitter - Acorn and Flax

For more tips on creating with this collection watch the tutorial at here.

Instructions: Create an A2 sized card out of white cardstock. Cut an A2 sized card panel from the Beary Fun Retreat Paper Collection and die cut the center image using the coordinating die from the Eyelet Oval and Basic Large Die set. Sponge outer edges of A2 design paper card front with Olive Grove Memento Ink and adhere to card base with pop dots. 

Adhere die cut center image directly to the card base with Dries Clear Adhesive. Cut the "Beautiful Day" sentiment from the design paper and sponge edges with Cantaloupe Memento Ink and adhere to card as shown. 

On white cardstock with Tuxedo Black Memento Ink stamp the fall foliage border and oak leaf fall foliage image from the Sunflower Accent Stamp Set and the sunflowers from the Classic Sunflowers Stamp Set and die cut all with coordinating dies. 

Cut the border so that only the center sunflower with attached oak leaf remains. Also, use one of the small die cut sunflowers. Color the sunflower centers with Potter's Clay and the petals with Peanut Brittle and Cantaloupe Memento Inks and the oak leaves with a combination of Pistachio, Potter's Clay, Rhubarb Stalk and Peanut Brittle Inks. 

Shape all die cuts with the Deluxe Flower Shaping Tools. Adhere the sunflower with the attached oak leaf to the small sunflower and cut the oak leaf foliage as needed. Adhere all to card front as shown using the Dries Clear Adhesive. 

Add Flax Glitter to the sunflower petals, Acorn Glitter to the sunflower centers, and Lichen Glitter to the leaves.

Other Products: Archival inks Black, Coffee Brown, Leaf Green, Sunflowers, Monarch Orange, Distress ink Vintage Photo, Foam Tapes, Smooth White Card Stock, Ready Stamens 

For more tips on creating with this collection watch the tutorial at here.

Instructions: The ready card base measures 7" x 7". You can create this by using two panels one measuring 7 x 8" Score and fold this at 7". The second piece will be 7 x 7". Apply glue to the 3" fold and attach the 7 x 7" piece. You will only see the 1" overlap on the back of the card base.

Choose a 6" by 6" panel from the designer paper collection and die cut the window using Circle Basics Large Die. Die cut three arches from Festive Holiday Collection from white cardstock. Adhere one arch inside the circle, then layer the rest as shown on card base. I used foam tape to pop up the circle.

The Bear image is die cut from the pattern paper itself using its cordinating die. The images from Beary Sunflower Accents Stamp Set are stamped with Black Archival and die cut using their coordinating dies. 

For the flowers, stamp and die cut sunflowers using Color Box Dark Brown ink on white cardstock. Color the flowers with Harvest, Pumpkin Spice, and Red Barn, with the help of Stack and Store Daubers. Shape the flowers using Deluxe Flower Shaping Kit. Follow Emma’s video for easy shaping of Sunflowers here. Add details to flowers by adding Crystal Clear Glitters and Frosting Powder. Also, add Espress-O Yourself prills in the center using an adhesive that dries clear. 

Once all the elements are ready, assemble the card as shown.The filler flowers are from Wildwood Florals Die with a touch of Sunflower ink and a flower stamen in the center. Finally, add a sentiment to finish the card matted in black cardstock. 

Other Products: Cut File, Brown Card Stock, White Cardstock, Pebbles Classic Chalks Earth Tones, Bronze Micro Beads, Archival Inks (Watering Can and Dandelion), Mustard Seed Distress Glitter and die cutting machine.

For more tips on creating with this collection watch the tutorial at here.

Instructions: Start by cutting and assembling the S'mores Box found here according to the directions out of brown cardstock with the panels cut from the Beary Fun Retreat Paper Collection. 

The bear image was stamped on white cardstock using Rich Cocoa ink before die cutting with the matching die, then color with Pebbles Classic Chalks Earth Tones. The campfire image was stamped on white cardstock using Watering Can ink before die cutting with the matching die and coloring with Pebbles Classic Chalks Earth Tones. Accent with Mustard Seed Distress Glitter.  

The Sunflowers were stamped on white cardstock using Rich Cocoa ink before die cutting with the matching die and coloring with a combination of Dandelion ink as well as Bamboo Leaves ink and shaping with the Deluxe Flower Shaping Kit before accenting the centers with Bronze Micro Beads.

Other Products: Card Stock: Brown, Crafters Companion White-hint of gold 300gm, Coffee Archival ink, Distress Inks: Walnut Stain, Peeled Paint, Forest Moss, Wild Honey, Barn Door, Black Soot, Fired Brick, Vintage Photo, Gathered Twigs, Faded Jeans, Older Paper, Ground Espresso, Rusty Hinge, Spiced Marmalade, Diamond Stickles, Water Mister, Inking tool, Bone Folder, Water colouring brush, Paper distressing tool, Scissors, Ruler, Hot glue gun, Fussy Cutting Scissors, Double sided Tape, Double Sided Foam Tape, organza Ribbon, Misti, Zutter bow maker, Glue dots

Click here to see the video on using the Deluxe Flower Shaping Tool Kit

When making the card base first visit here to see a tutorial on how to put this card together. 

 Instructions: See this link to see a close up view of this slider card. This slider card when completed measures 7" x  8. 2 / 16" (17. 6  cm x 20. 9 cm). Taking the A4 300gm card-stock and make the card base by first making 2 folds, being 2 1/4" (6 cm) along the long side to form the foot of the card. Fold this to a hill and valley fold. Cut the card front base at 5 9/16" x 6 3/4" (14. 2 cm x 17. 1 cm). The card slider at 2 5/8" x 4 1/2" (6. 7 cm x 11. 5 cm). 

Find the design paper with the footprints on it for the card background and slider guide. Cut a little smaller then adhere to the card base. Taking the brown card stock and cream design paper, cut this to fit the card front. Cutting it a little smaller than the other for matting. Not forgetting to leave the top of the papers open for the slider, adhere to the card front base. Taking the cream card stock and the HCD1-7120 Fleur boarder basic die set, cut two panels to form the shape of a hill. Ink the edges so the hill shape will pop. Adhere the hills to the card front with 3d foam tape.

Taking the stamps and matching dies make the embellishments for the card. Stamp in Coffee Archival Ink on white paper. Stamp lots of the trees as once they are coloured they will be tucked and adhered behind the hills to make the scene. The fire is stamped x3. The fire flame part of the image is cut away from two of the die cuts and layered to give dimension to the fire. Color pieces using Distress inks Walnut Stain, 

Peeled Paint, Forest Moss, Wild Honey, Barn Door, Black Soot, Fired Brick, Vintage Photo, Gathered Twigs, Faded Jeans, Older Paper, Ground Espresso, Rusty Hinge, Spiced Marmalade using daubers and shape using Deluxe Flower Shaping kit.

Form the scene as shown in the photo. Find the sentiment in the paper collection, trim and ink the edges. Curl to form a banner and adhere with glue. Make a double triple bow from the organza ribbon and adhere to the top of the slider guide. To finish, apply the Stickles to the flowers and fire flames.

Other Products: Jute Twine, Dimensional Adhesive, Scissors, Paper Trimmer, Die Cutting Machine, Archival Ink: Sunflower, Leaf Green and Black, Heating tool, Zig Markers, Distress Ink Festive Berry

For more tips on creating with this collection watch the tutorial at here.

Watch this video on how to shape the Sunflowers here

Instructions: The base card panel measures 5.5 x 5.5" from a kraft card stock. Cut a white cardstock 1/8" less than the card base. Cut another coordinating pattern paper from the sunflower collection at 1/8" less. Adhere the layers to the kraft card base. For the second layer similarly cut another white cardstock and coordinating paper with 2" less than the 1st card base and adhere to the card panel.

Die cut several pieces of Sunflower dies using white cardstock. Color them using Sunflower Archival ink with a touch of Distress Festive Berry. Spray them with water and then shape them and heat set. Once shaped fill the center using prills and sprinkle with some Frosting Powder.

Die cut 2 pieces from Window Box Elements die from white cardstock and then place it on one corner of the card panel. 

Stamp several pieces from the sunflower accents die using black Archival ink on white cardstock and some on designer paper and die cut with coordinating dies. Color with Zig Markers and cut apart if desired.

Fussy cut the sentiment ticket out of designer paper. Assemble the flowers, leaves, some jute twine, and sunflower accents to create the bouquet. On the other corner of the card place the sentiment on a foam adhesive embellished with the sunflower accents. Add Dries Clear glue to the center of the sunflowers and add Power Outage Prills. Allow to dry.

Other Products: White card stock, VersaFine Vintage Sepia Ink Pad, paper trimmer, MISTI, Gemini Die Cutting Machine, pop dots, Glossy Accents, Scor-Tape, Memento Dye Ink Pad - Grey Flannel

For more tips on creating with this collection watch the tutorial at here.

Instructions: Create a 4.25" x 5.5" card base using white cardstock. Locate plaid paper and premade card panel in paper collection. Trim plaid background mat just slightly smaller than card base. Using Eyelet Oval and Basics Small Die, die cut center of premade card panel. Ink all edges of pieces with Harvest colored ink. Adhere plaid card mat to card base, then rectangular premade card base to plaid mat using pop dots. 

Locate navy decorative paper in paper pack and die cut two intricate arches die cuts from the Festive Holiday Die. Adhere to card base, one to top and one to bottom where oval has been die cut from card panel. 

Stamp sentiment onto oval die cut image using MISTI and Nautical Blue ink. Adhere to card base with doubled up pop dots. 

Stamp one honey bear image and all three small standing sunflower images, one leafy branch, grass and mushroom images onto white card stock using Vintage Sepia ink, die cut using coordinating dies. Color using daubers along with Peanut Brittle, Lipstick Red, Creamy Brown, Harvest, Dark Brown and Olive Pastel inks, shape using flower shaping kit. 

Adhere sunflowers to card as shown using a dries clear glue, and little bear, grass and mushrooms using doubled up pop dots. Using a dries clear glue, apply glitter to images on sentiment panel as well as on shaped sunflowers. Add a touch of glossy accents to honey on bear image. 

Other Products: Peeled Paint Distress Ink; Vintage Photo Distress Ink; Wild Honey Distress Ink; Aged Mahogany Distress Ink, Rusty Hinge Distress Ink, Archival Cocoa Ink; Root Beer seed beads; white cardstock

Watch this video on how to create the 6 x 6" Shadow Box here.

For more tips on creating with this collection watch the tutorial at here.

Instructions: Stamp and die cut all your smaller images on white cardstock with Archival Cocoa Ink. These images include three trees; deer; rock border; small bird; flower border. Color using Peeled Paint, Vintage Photo, Wild Honey, Aged Mahogany, Rusty Hinge inks along with daubers. 

Stamp the Classic Sunflower with Archival Rich Cocoa Ink onto white card stock two times and die cut. Color with Wild Honey, Vintage Photo, Rusty Hinge and shape using the Deluxe flower shaping kit. Watch this video on how to shape the Sunflowers here. 

Stamp and die cut the leaves from the delightful daisy set also on white card stock using Archival Rich Cocoa Ink. Colour with Peeled Paint, Wild Honey and Vintage Photo and mold using the Deluxe flower shaping kit. 

Stamp and die cut three sets of classic rose vine onto white card using Peeled Paint ink. Colour with Peeled Paint Distress ink and mold. 

Fold Shadow box on all score lines. Cut a 6.25 x 6.25” paper to fit inside shadow box and adhere. Photo is 5.25 x 5.25". Mat this twice with papers from collection. They will measure 5.5 x 5.5" and 5.75 x 5.75". Die cut papers for outside of box by tracing out center opening onto a piece of pattern paper and use the Cut Mat Create die to die cut it.  Adhere matted photo to inside of box before assembly. 

Begin to build your trees and elements on the bottom as shown. Adhere your Classic Sunflower together, add seed beads to centers and adhere to frame on the shadow box.  Add smaller sunflowers to frame and classic leaf vine by cutting apart to form three pieces. Finally detail all layers inside box; sunflowers and leaves with glitter. 

Other Products: White and Blue Cardstock, Dimensional Tape, Scor-Tape, Seam Binding, Ripe Persimmon, Spiced Marmalade, Peeled Paint, Shabby Shutters, Forest Moss, Mustard Seed, Squeezed Lemonade Distress Inks, Canson Watercolor Paper

Watch this video on making sunflowers here

Instructions: My card size is 5 X 7". Make card base and cover with a piece of dark blue paper from the  collection. 

Die cut two medallion pieces from white cardstock and the medallion outline from blue paper and adhere together. Using dimensional tape, adhere them to the card front. 

Stamp the flowers and leaves in Tuxedo Black on white cardstock ink and die cut. Using the Distress inks Squeezed Lemonade, Mustard Seed, Spiced Marmalade, Peeled Paint, Sabby Shutters, Forest Moss. Watercolor the flowers and leaves and then add the Espress-O Yourself Prills to the centers and set aside to dry. 

When dry add the Crystal Clear to the ends of the petals and let dry. Next color the seam binding with Persimmon Distress Ink and scrunch and set aside to dry. When everything is dry decide on the placement and glue everything down. Tie the bow and using tape and glue, adhere it to the card front and your card is ready to go!

Other Products: White cardstock, Scissors, Trimmer, Die Cutting Machine, Distress inks-vintage photo, Archival inks- Jet Black, Sunflower, Library Green, Leaf Green, flower pollens

For more tips on creating with this collection watch the tutorial at here.

Watch this video on how to shape the Sunflowers here

Instructions: Cut a card base 12 x 6" and score at 6" on the longer side. Fold to create a 6 x 6" card base. Cut a 6 x 6" card panel design from the pattern paper and adhere to the card front using dries clear glue. 

Using the Cut and Mat Create 2A die, die cut the square panel. Adhere another 6 x 6" frame from the paper stack in the inside of the card. Die cut a tag, from the designer paper and add in the inside panel.

Stamp mugs and sentiment on white carstock using Jet Black ink. Using a scissors trim the corners at an angle. Distress with Vintage Photo Distress ink along with daubers. Add to the front of the card.

Stamp onto white cardstock, sunflowers using black ink, and leaves using Library Green inks. Die cut with coordinating dies and colour the sunflowers with Archival Sunflower ink, leaves with Leaf Green ink. Mold using the deluxe flower shaping kit. Add prills in the centres of flowers. 

Arrange them on the card as shown and adhere.

Other Products: Dandelion Memento, Oxide Distress Ink: Shabby Shutters, Wild Honey, Spiced Marmalade, white cardstock, brown cardstock, Fun Foam, clear embossing powder, VersaMagic, brown pearl halves, heating tool

Watch this video on how to shape the Sunflowers here.

Instructions: Card size: 5 1/4" X 5 1/4". Cut one layer from brown cardstock a little smaller than card base and yellow designer paper. Stamp the Scripture onto the decorative paper circle using Potter's Clay ink. 

Die cut three of the Festive Holly Die arch from white linen cardstock. Use the Cut Mat Create 2A and Small Circle Die (they fit the designer paper designs perfectly), to die cut designer paper and Fun Foam for this card. 

Arrange as shown, sticking one of the die cuts under the square layer of Fun Foam/Decorative paper, at the top and the other two under the circle Fun Foam/decorative paper layer.  Stack and adhere all layers onto card base. I use liquid glue, not tape runner, for the Fun Foam layers to make sure I have a good hold.

Sponge Oxide Inks onto white card stock blending colors together. Then stamp the maple leaf using VersaMagic and clear embossing powder to heat emboss, die cut. Apply Crystal Lacquer

Stamp sunflowers from Classic Sunflowers, using Potter's Clay ink onto white cardstock and die cut. Color using Dandelion, Wild Honey, Spiced Marmalade, and Potter's Clay ink along with daubers. Wet and shape flowers, let dry then stack and glue together. Add Espress-O Yourself Prills to the centers of the flowers. 

Stamp daisy like flowers using Tuxedo Black ink and die cut. Color centers with New Sprout ink and shape using the Deluxe Flower shaping kit and add Go Man Go Prills to the center with dries clear glue. 

Glue leaves around left side of circle (foam tape some of the leaves for dimension) and then arrange sunflowers and daisies on top of leaves. Add the brow half pearls and you are done.

Other Products: White cardstock, Archival ink- Buttercup, Plum, Glossy accent, Distress ink-Peeled Paint, Mustard Seed, Spice Marmalade, golden beads, clear glass beads, acrylic paint

For more tips on creating with this collection watch the tutorial at here.

Watch this video on how to shape the Sunflowers here

Instructions: Let’s start creating this shaker mini album with 5 pages for inside. Take a thick cardstock for pages and cut them. Final size of the pages are 5” circle and decorate them with designer paper. Shaker embellishment is a 3D Chipboard decorated with a designer paper with sequins and prills, leaves sunflower accents cling stamp set with coordinating die, and the chipboard is painted with acrylic colours.

Create flowers using the Classic Sunflower stamp set using Buttercup Archival ink on white cardstock and diecut with coordinating dies. Color them with buttercup and shape them with Deluxe Flower shaping kit. Use three layers for creating flowers and at the centre use dries clear glue and Redland Elements earth textures.

Stamp various Sunflower Accents on the white cardstock with black Archival ink and die cut them with the coordinating die. Color them with Distress ink-Peeled Paint, Mustard Seed, Spiced Marmalade. Add Glossy Accents and sprinkle golden beads and clear glass beads. Stamp flowers from window box fillers stamp set with black Archival ink and and die cut them with coordinating die. Add just a little color in the centre using Mustard seed ink and add Go Man Go prills at the centre with dries clear glue.

Take another white cardstock and stamp Happy Time Treehouse Cling Set with black and Plum Archival ink and colour them with Zig Clean Color Real Brush and cut them with coordinating dies, and add it to the top of the chipboard as shown on the pix. Decorate the inside pages according to your own choice.

Die cut one Sentiment from the designer paper using the Luggage and Tags dies and paste it as shown on the picture.

Die cut two beautiful die from Festive Holiday and paste it at the base of the chipboard and add one ring at the top of the album.

Other Products: Rust color cardstock

Watch this video on how to shape the Sunflowers here

Watch this video on how to cut out the intricate dies here

Instructions: Prepare a 6 x 6" white card stock base. Cut a piece of the rust card stock 1/4" smaller, die cut the Medallion out on both sides and adhere to card base. 

Use the largest Large Oval Die and die cut with the white cardstock, top with the largest of the Small Oval die of the rust cardstock, cut the white cardstock

oval out. Use the stamp positioner and stamp the sentiment in black, add D-Dots to the back and adhere to the card. 

Stamp the leaves on white cardstock with the black ink, die cut, color with the Bamboo and adhere to card. Stamp the flowers on white cardstock with Pumpkin Spice ink, die cut, color with the Cantaloupe and Lipstick Red inks. Shape using the deluxe flower shaping kit and adhere to card. To finish, add prills in the center of the flowers and Crystal Clear to the flower petals and leaves.

Other Products: Distress inks Walnut stain, Scattered Straw, Peeled Paint, Mustard Seed, Wild Honey, Rusty Hinge, Die Cutting Machine, 3d foam pads, Tacky Glue 

For more tips on creating with this collection watch the tutorial at here.

Watch this video on how to create the 6 x 6" Shadow Box here.

Instructions: Start by assembling your Shadow box and put in one of the topper panels, attach this with Tacky Glue to the back of shadow box.

Stamp treehouse in black ink on white cardstock and die cut. Color using Peeled Paint and Walnut Stain. Attach this at the bottom to one of the Black Card strips that is included in the shadow box.

Stamp lots of the leaves and sunflowers, in black ink onto white cardstock and diecut. Color using Rusty Hinge, Wild Honey, Mustard Seed, Scattered Straw, Peeled Paint, and Walnut Stain using daubers and Dove blender pen. Shape using the flower shaping kit. 

Place the around the top of your shadow box inside and out as shown. Add sentiment, cut from designer paper pad.

Other Products: Paper trimmer, ribbon, Hot Off the Press Shutter Card template, Chameleon Pens in Royal Blue, Bisque, Hot Cocoa, Spring Meadow, Warm Sunset and Seville Orange 

For more tips on creating with this collection watch the tutorial at here.

Instructions: To see a close up of this card see this link. The shutter card template makes it very easy to construct this fun double shutter cards to make a mini album for display of photos. Using 2 pieces of 12 x 12" white cardstock trace 2 card bases using the template. Remove the template and cut out the shape including cuts. Cut a piece of 4 x 6" white cardstock to glue the two card bases together to form the mini album and a 4 x 6" place for a photo in the middle of the mini album. Score all fold lines. 

Trace the paper pattern shapes on the back of the selected Beary Fun Retreat paper. The center and spine pieces for the cards will need four pieces of designer paper each. Remove the template and cut out all the shapes. Before gluing down the front two panels lay down ribbon. The ribbon tie will hold the card base together when folded up. Select a total of seven images to use and arrange on the double shutter card layout. Glue all the paper pattern shapes to their designated places on the card base.

Please note when cutting and placing the paper pattern pieces that they are smaller than the card base. This allows the card base cardstock to form a mat for the papers. 

Stamp, die cut and color two sets of leaves and two borders from the Beary Fun Retreat Sunflower accents, one tree from the Woodsy Treescape and one set of flowers from the Woodsy Wonderland. Color images in Chameleon Pens in Royal Blue, Bisque, Hot Cocca, Spring Meadow, Warm Sunset and Seville Orange. 

Arrange tree, flower and sunflower accents on the card as illustrated. 

Other Products: Orange Ribbon, Natural Jute, Green Jute, Gala Glitz Brown, Sparkle Sheer Shimmer Spritz, Big Shot Plus,  8 3/4”x 3 3/4” Chip Board Tag, Wooden Oval Frame, Clear Wink of Stella, Distress Ink Vintage Photo, Hot Glue Gun, Scissors. 

See how to shape the Classic Sunflowers here

For more tips on creating with this collection watch the tutorial at here.

Instructions: Trace the tag on paper from the paper pad, cut out with a scissor, ink the edges with Vintage Photo ink and adhere the paper to the tag using Dries Clear Glue. Paint the bear, rocks and log with Wink of Stella. Glitter the flowers and tree leaves on the paper with Lion’s Mane Glitter. 

Paint the wooden frame with a combination of Copper, Walnut Brown and Moss Green 3D Stamp Paints. Stamp the leaves from the Sunflower Accents Cling Stamp Set with Tuxedo Black ink and color with Bamboo Leaves, Peanut Brittle and Rhubarb Stalk inks.  

Stamp the Classic Sunflowers with Potter’s Clay Ink and color with Harvest, Peanut Brittle and Rhubarb Stalk Inks. Shape the flowers and leaves using the Deluxe Flower Shaping Kit and spray them with Sparkle Sheer Shimmer Spritz. When dry, glitter them with Rajni Chawla’s Crystal Clear and add Brown Gala Glitz to the centers of the sunflowers. Adhere the flowers, leaves and frame to the tag using a hot glue gun. Using the Luggage and Tags Die, cut out the Sending Love Your Way Tag from the paper pad, shape, glitter and adhere to the tag. Attach the Ribbon and jute to the tag as shown.    

Other Products: Coral cardstock, dark brown cardstock, mounting tape, Abandoned Coral Distress Ink, Metal Nailheads, quilling tool, green cardstock or green quilling paper strips, Clear Crackle Paint, heat tool, paper trimmer, double sided tape, glue gun Copic markers (E30, E33, E35, E37, E39, E00, E11, E21, R20, R22), Fossilized Amber Distress Ink, Squeezed Lemonade Distress Ink

For more tips on creating with this collection watch the tutorial at here.

Instructions: To see another view of this card see this link. Cut 8 1/2 x 5 1/2" heavy cardstock. Place paper with the long side horizontal (8 1/2")  and score at 2 1/8". Flip to the other end and repeat score line. This will create a card measuring 5 1/2" x 4 1/4".  The card opens in the middle with a flap on each side. 

Select the paper from the Beary Fun Retreat paper collection and cut with a 1/8" margin on the outer sides, top and bottom of the card. Line the inside of the card as well. 

Close the card and place a circle die as shown. Tape to one side of the card. Open card and die cut. Close the flaps and while keeping the circle die in the same place, tape the other side and run through your die cut machine. Die cut a circle frame using two circle dies and place onto circle opening (you'll have to cut the circle frame where the two panels meet.

Stamp the bear holding a guitar image with Espresso Truffle ink onto white cardstock. Color the bear with the following Copic markers - E30, E33, E35, E37, E39.  Apply 70% alcohol to a terry cloth and hold over the bear for 6 seconds. When dry, add R20, R22 to bottom of foot. The guitar was colored with E00, E11 and E21. Die Cut with the Beary Fun Retreat die. Apply 3-D lacquer to the guitar and allow to dry overnight. Cut 3-4 images (bear with guitar) from brown cardstock and adhere with a narrow strip of mounting tape between each layer for dimension. The tape should not show when viewed from the side. 

Cut green arrow strips for each side. Cut 3-4 more arrows for each side and adhere together for strength. Cut additional rectangular strips to create a buckle as shown. Glue the straight end of the arrows on the inside of each flap and apply the designer paper over the top for a clean finish. See the picture as a reference. The buckles will interlock and keep the card closed. Close the card flaps and adhere the bear with adhesive through the circle for perfect placement. 

Stamp the sunflowers from the Classic Sunflower cling collection using Espresso Truffle ink onto white cardstock. Die cut the flowers and sponge with Fossilized Amber Distress Ink and Squeezed Lemonade Distress Ink. Gently mist with water and shape with the Deluxe flower Shaping Kit.  

Quill loose coils with 1/8" green cardstock or quilling paper. Apply to the center of the sunflowers with Designer Dries clear Adhesive. Stamp the leaf flourish from Classic Rose stamp on coral cardstock with Espresso Truffle ink and die cut with the coordinating die. Spritz with water, and gently shape.

Apply Clear Crackle paint and sprinkle with Rajni's Frosting Powder. Heat Set.  Adhere the flowers and leaf flourishes. Nailheads are applied for embellishment.

Other Products: Plastic Oval Ornament, CTMH Ink- Chocolate, Chameleon Pens (RD4, RD3, NU3, OL3, YO2), Scrapbook Adhesives by 3L (Mini 3D Foam Squares, Extreme Double Sided Tape), Twine, Button

Instructions: Stamp and die cut 2 of the cardinal images using Chocolate ink on white cardstock. I added colour to the cardinals using Chamelion pens, 2 different reds, making one a little less vibrant for the female cardinal. From one of the die cuts I fussy cut out JUST the cardinals. On the other I added colour using my Chameleon Pens. Add 3D Crystal Lacquer to all of the holly berries. Let dry.

 With the oval dies if you were to number them from smallest to largest, the smallest being #1. I used the #4 die from the large ovals to cut one in white cardstock and one sentiment from the patterned sentiment sheet of patterned paper. Then using the #4 die from the small ovals I cut one from the dark green patterned paper. 

I adhered the white oval to the front of the ornament and the sentimant to the back using my Extreme Double Sided Tape, and popped up the green oval using 3D foam squares. 

Adhere the cut out cardinals on top of the full image using mini 3D foam squares. I adhered the layered image onto the ornament again using mini 3D foam squares. 

I created a layered twine bow and added it to the top of the ornament using hot glue, then added the single button.

Other Products: Gray Board, Light Blue Cardstock, Light Blue Seam Binding, Tape, White Snowflake Stickers, White Glitter Paper, Distress Ink Vintage Photo, White Pearl Pen

Instructions: Cut 2 pieces gray board of 5 x 5" and cover this with designer paper. Adhere on both sides 2 pieces of seam binding, this is for the closure.

Cut 3 Pieces of light Blue Cardstock at 8 ½ x 8 1/2". Fold this in half, then turn it and fold it in half again, then turn it and fold it once from point to point, now you fold those points to the inside. Do this with all 3 of them, you can see what I mean on my blog, I will put some photo’s there!

Now you put 1 piece with the points up, then 1 down and one up, now you can glue them on top of each other. Decorate all the parts with designer paper, I inked all the edges with Vintage Photo ink. After this you can glue them between the front and back cover.

Now assemble the shadow box, in the back you can glue a nice background, you can find this in the paper pad, then decorate some pieces with Crystal Clear. Close the box and decorate the front with some deer fussy cut out of designer paper, white glitter paper for the snow.

Stamp the leaves from the window filler stamp and die using black ink on white cardstock and diecut I colored it with the Bamboo Leaves and on top I made some berries with a pearl pen. At last I decorated the box with some snowflake stickers.

Other Products: Home decor wall plaque pieces, Westcott Brand Trimmer/Scissors, Copic Sketch: G21, G09, G29, T1, E30, E31, E33, E35, E39, Xpress-IT paper, Scrapiniec Embellishment, Gypsy Soul Lasercuts "Home" Set, Eyelets, Stickles - Crystal, Yellow, foamiran, flower stamens, X-acto knife, Heating tool

Instructions: Take your patterned paper and cover the base of the home decor wall plaque pieces. Cover each of the letters, using your craft knife cut any hanging pieces. You can use your craft file and file down any jagged edges.  

Die cut a total of 15 flowers using your classic petutnia dies on foamiran, color the center with Copic markers and shape using the flower shaping kit, adding heat if neccessary. Layer each petal staggered for a full look, pierce the center and add the flower stamens for a finished look. 

Stamp the girl tree image on X-press it paper using Tuexdo Black ink. Color using Copic Sketch markers and cut around it using an X-acto knife. Fussy cut leaves from designer paper and arrange in bottom corner of the "M" as shown. Decorate each piece of the wall plaque as desired with the colored images and scrapiniec embellishments.

Finally I added eyelets to the center of each hold for a polished look. You can now add ribbon if you'd like to connect this home decor piece.

Other Products: Versamark Ink, Ebosser, Joy craft embossing pad, Cuttlebug Anna Griffin Poppy Embossing Folder, Pick me Up, pearls & rhinestone heart

Instructions: Take a piece of white cardstock measuring 4" x 5 1/4" & emboss using Cuttlebug Anna Griffin Poppy Embossing Folder. Adhere to a 4 1/4" x 5 1/2" white card base.

Stamp the sentiment from All Glammed Up Sentiments Cling Stamp Set using Versamark ink on a piece of white cardstock & heat emboss it using Ranger Gold Embossing Powder & Ranger Heat-it Craft Tool. Heat emboss another strip of white cardstock using Versamark ink, Ranger Gold Embossing Powder & Ranger Heat-it Tool. Cut both into banner shape & Adhere as shown on the card front. 

Take Versamark ink & lightly tap the blade side of the die from Decorative Medallion Die so that only the edges of the blade are inked. Put it blade side down on a piece of 3 1/4" x 5 1/2" white cardstock. Emboss in using Ebosser & Joy craft embossing pad. Take out the embossed cardstock & heat emboss it using Ranger Gold Embossing Powder & Ranger Heat-it Tool. 

Now die cut the embossed design using the matching outline die from the same die set. Adhere it to the left side of the card front with foam adhesive. Add the rhinestone heart & pearls to the heat embossed background using Pick me Up for finishing touch.

Other Products: White pearlised cardstock, 3D foam tape, Foamiran, waterproof black pigment ink, pink pigment ink, white glitter, floral stamens, hot glue gun, magic glue, heat gun

Instructions: The ready top fold card measures 5 1/2 x 5 1/2" for white pearlised paper card base. Select the designer paper from the Classic Wedding Paper Collection, cut at 5 1/4 x 5 1/4". 

Die cut Delicate Border from white pearlised paper. Cut another layer Classic Wedding Paper Collection cut at 5 1/2 x 5 1/2", die cut fun shape using Border die line to match shape to border and die cut. Glue it together and use dimensional adhesive to attach onto card.

To make the pink flowers stamp the flowers from the Large Classic Petunia Cling Stamp Set into white foamiran with black permanent waterproof ink and sponge the stamped images with the pink pigment ink before die cutting with the coordinating die. Use iron or heat gun to shape flower using your fingers, add floral pink stamens. Sponge the petals with clear quick drying liquid glue, sprinkle white glitter. 

To create leaf, stamp Classic Rose Cling Stamp Set with green alcohol ink into white paper and cut with the coordinating die and sponge the edges of the stamped leaves using Bamboo Leaves ink to create natural shadow. Shape leaves using Deluxe Flower Shaping kit.

I added flower stamens to the center of the flowers. Arrange the flowers and leaves over borders and adhere it using hot glue gun

Other Products: Crafter's Companion Centura Pearl White cardstock SVG from svgcuts.com, Cricut Explore, Canvas 8" x 8", Voodoo Molly Vintage Paint Pistachio, American Decoupage glue, Ice block stick, Hot Glue gun

Watch this video on tips on how to shape the petunias

Instructions: Paint the canvas with the Vintage Paint. Cut a piece of patterned paper 7" x 7" and adhere to the canvas. Cut another panel 6" x 6" and adhere to the canvas and seal with the decoupage adhesive. 

Die cut the cup and saucer using the SVG, out of the Centura Pearl cardstock. Cut the decorative pieces from the Classic Petunia Paper Collection and adhere to the cup and saucer. Seal with the decoupage glue. Adhere the saucer to the canvas with Dries Clear glue. 

To create the floating cup partially break an ice block stick in three and strengthen the breaks with the hot glue. Adhere the top of the stick to the inside of the cup and the bottom to the saucer using the hot glue. 

To make the petunias stamp the images from the HCPC-3786 Large Classic Petunia stamp and the HCPC-3785 Small Classic Petunia stamp sets in Dark Peony ink and the leaves in Bamboo Leaves ink. Sponge the centres out of the flowers with Berrylicious and Dark Peony inks and die cut using the coordinating dies, and shape using the Deluxe Flower Shaping kit. Sponge the leaves with New Sprout ink and die cut using the coordinating dies. Sponge the edges of the leaves with Bamboo Leaves and then shape using the Deluxe Flower Shaping kit.

Stamp birds in black ink onto white cardstock and die cut. Color using daubers along with Summe Sky ink and Cantaloupe ink. Shape Using the Deluxe Flower Shaping kit.

Assemble the flowers on the leaves using the Dries Clear glue and adhere to the display with the hot glue gun