Other Products: White cardstock, scissors, paper trimmer, dimensional adhesive, water mister, die cutting machine

For more tips on creating with the Lush Lilac collection, watch the tutorial at https://youtu.be/KDbdzC0MnAI.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Cut white card base to 9 1/2 x 6" size, score and fold at 4 3/4". Stamp the small lilac spray in Veridian ink onto top right and bottom left corners of card. Sponge the edges of card base with Cactus Flower ink.

Cut 2 pieces of white cardstock to 3 1/2 x 3 1/2" size. Use from Classic Border set to diecut the plain wavy and stitched edge at a corner angle from square cardstock. Use the plain wavy border to diecut coordinating corners from a 6 x 6 " panel within the paper collection. Sponge the edges of the patterned corners with Cactus Flower ink. Cut narrow border strips and sponge with same ink. Layer narrow border strips onto patterned corners and trim off excess edges. Layer patterned corners onto larger coordinating corners and onto card as pictured.

Stamp the petals and 2 small sprays from HCPC-3816 Lush Lilac and umbrella from HCPC-3818 Sweet Lilac Scroll & Notes stamp set in Deep Purple ink onto white cardstock and diecut. Diecut the cage from white cardstock. Stamp the sentiment in Cactus Flower ink onto white cardstock and diecut with arrow die.

Use the Stack and Store daubers to sponge edges of 7 lilac petals with Veridian ink and Cactus Flower in the centers. For color variation, use a touch of Garden Patina on half of the petal centers. Use the Dove Blender over petals to increase color vibrance. Use Cactus Flower and Garden Patina on lilac sprays. Use Leaf Green and Emerald Green on leaves. Sponge edges of cage and arrow with Veridian ink.

Use the lilac shaping mold to shape petals or simply shape with shaping stylus. Shape the lilac sprays. Use dimensional adhesive to attach cage onto card. Attach arrow sentiment and remaining lilac spray and petals. Using the Dries Clear add a touch of Baby's Breath glitter over card as desired. Use the same glue to add itty bitty Lemon Chiffon prills to center of lilac petals.

Other Products: white card stock, Gemini Die Cutting Machine, BigShot Die Cutting Machine, Dew Drops - Orchid, paper trimmer, scissors, pop dots, VersaFine Black Ink, Qtip, scor tape

For more tips on creating with the Lush Lilac collection, watch the tutorial at https://youtu.be/KDbdzC0MnAI.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Create a 5" x 7" card base from white card stock. Locate the layout page with the scroll and lilac cluster within the Lush Lilac Paper Collection, as well as the designer paper with purple brocade style background. Cut the scroll image section to be just slightly smaller than your card base and die cut decorative edge using the Fleur Border Basics Die and your die cutting machine.

Next, die cut the coordinating eyelet border from the Fleur Borders Basics Die from white card stock using your die cutting machine. Using a sponge or Q tip, spread some dries clear adhesive over the eyelet border and sprinkle with the Crystal Ultrafine Transparent Glitter. Adhere to back of matting piece with decorative edge/scroll image. Now cut and add the section of purple decorative paper to the back of the mat making sure that when they are adhered together they will measure just slightly smaller than your card base. Ink all edges of the card front panel you've just created with ColorBox Wisteria Ink. Adhere card front to card base.

Using the oval die cuts, create a frame using the eyelet oval and oval the next size down. Next, continue with the oval dies and cut another frame one size down from the eyelet oval using your die cutting machine and a piece of coordinating decorative paper. Ink the inside edge of the decorative paper frame with ColorBox Wisteria Ink. Adhere frames together, and using a sponge or Q tip add Designer Dries Clear Glue to outer white frame and sprinkle with Crystal Ultrafine Transparent Glitter.

Locate the premade card panel with the bird image as shown. Using the two sets of Eyelet Oval & Basics dies, die cut the bird image from the card panel so it will fit behind the oval frame you have created. Ink all edges of the oval with ColorBox Wisteria Ink. Using VersaFine Black Ink, stamp sentiment onto oval bird panel. Using pop dots, adhere bird panel to back of frame. Adhere frame to card front as shown.

Next stamp two inkings of the smallest lilac cluster from the Lush Lilac Cling Stamp Set, and one inking of the lilac cluster from the Lush Lilac and Umbrella Spray Cling Stamp Set onto white card stock using ColorBox Concord Ink. Die cut using die cutting machine and coordinating dies. Color all lilac images and blossoms using Stack and Store daubers with a combination of ColorBox Wisteria and Memento Lilac Posies inks. For foliage color using combination of ColorBox Olive Pastel and Lime Pastel inks.

Stamp one inking of the bird image from the Songs of Spring Cling Stamp Set, die cut using coordinating die and color using Memento Danube Blue and Morocco inks.

Shape stamped embellishment background pieces using Deluxe Flower Shaping Kit. Shape lilac blossoms using 3D Lush Lilac Shaping Mold and Deluxe Flower Shaping Kit as shown in video link above.

Adhere the two smallest lilac clusters to oval frame as shown. Adhere large stamped lilac cluster image over where scroll appears on the decorative paper. Add shaped lilac blossoms to small clusters on frame and to large cluster on bottom corner of card as shown. Trim off the bit of branch under the birds tail and tuck into cluster as shown.

For finishing, using fine metal glue tip with Designer Dries Clear Adhesive, apply Crystal Ultrafine Transparent Glitter to all pre-printed imagery on card front as well as all shaped lilac blossoms. Adhere dew drops around flower clusters and prills to shaped flower centers.

Other Products: Brilliance Pearlescent Purple Ink, Brilliance Pearlescent Lavender ink, Pearls, SVGcuts file, Cricut Explore Air, American Crafts cardstock - purple. White organza ribbon, light purple ribbon, Bow Maker, Glue Gloss

For more tips on creating with the Lush Lilac collection, watch the tutorial at https://youtu.be/KDbdzC0MnAI.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Click here to view a larger photo of this project. Die cut the umbrella using this SVG file on the machine using the American Crafts purple cardstock and the patterned paper. Assemble according to the instructions. An extra layer was added for more strength to the umbrella handle.

Stamp two large lilac spray images from the HCPC-3818 Lush Lilac Scroll & Notes Cling Stamp Set in Tuxedo Black ink on white cardstock. Sponge the leaves with Bamboo Leaves inks and use the Dove Blender pen to colour the flowers with the Purple and Lavender inks and die cut with the coordinating dies. Shape lightly and adhere to the back of the umbrella on either side of the handle.

Stamp several small lilac spray images from the HCPC-3816 Lush Lilac Cling Stamp set in Tuxedo Black ink on white cardstock. Sponge the leaves with Bamboo Leaves ink and use the Dove Blender pen to colour the flowers with the Purple and Lavender inks and die cut with the coordinating dies. Adhere to the umbrella handle (leaving room for the ribbon bow) and around the larger lilac spray images on the back of the umbrella.

Stamp three large lilac spray images from the HCPC-3817 Lush Lilac & Umbrella Cling Stamp Set in Tuxedo Black ink on white cardstock. Sponge the leaves with Bamboo Leaves and colour the flowers with Purple and Lavender inks with the Dove Blender Pen. Die cut with the coordinating dies, shape and adhere to the top of the front of the umbrella as shown.

Stamp the lilacs from the HCPC-3816 Lush Lilac Cling Stamp in Purple ink, sponge with the Purple ink and die cut with the corresponding die. Shape the lilacs with the HCFB1-466 Lush Lilac Mold and adhere the lilacs to large sprays on the front of the umbrella, the long and small lilac sprays on the inside of the umbrella and up the umbrella handle. Add Crystal Clear glitter to the lilacs with Glue Gloss

Cut the tags from the patterned paper and adhere to the umbrella handle with twine. To finish make a double bow with organza and purple ribbon using the bow maker and adhere to the handle as shown. Add pearls on the front as shown.

Other Products: Spellbinders Hemstitch Rectangles, Go Press and Foil, Brilliance Pearlescent Purple, Itty Bitty Clear Sparkles, Foam dots

For more tips on creating with the Lush Lilac collection, watch the tutorial at https://youtu.be/KDbdzC0MnAI.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Cut a piece of white cardstock 8 1/2" x 5 1/2", score along the long side at 4 1/4" and fold to create a 4 1/4" x 5 1/2" base card. Using the Largest edge die, hemstitch die and the second largest edge die from the Hemstitch Rectangles die set foil with gold using the Go Press and Foil machine. Using a sharp knife and ruler trim the edges before adhering to the front of the card. Using the second largest edge die cut a piece of white cardstock and adhere to the base card with foam tape. Die cut the house image using the third largest edge die from the Hemstitch Rectangles die set and adhere to the front of the card as shown.

Cut the sentiment out from the paper collection, shape and adhere to the front of the image as shown.

Stamp the small lilac spray image from the HCPC-3816 Lush Lilac Cling Stamp set in Tuxedo Black ink on white cardstock. Sponge the leaves with Bamboo Leaves ink and the lilacs with Purple ink. Shape and adhere on the top left of the patterned image over the sentiment.

Stamp the lilacs from the HCPC-3816 Lush Lilac Cling Stamp in Pearlescent Purple ink, sponge with the Purple ink and die cut with the corresponding die. Shape the lilacs with the HCFB1-466 Lush Lilac Mold, allow to dry and adhere the lilacs to small lilac spray. Add Crystal Clear glitter to the lilacs with Glue Gloss and little bitty sparkles to the centres.

Stamp the small bird images from the HCPC-3768 Woodsy Critters Stamp set in Tuxedo Black ink on white cardstock and die cut with the corresponding dies. Colour the birds with Peanut Brittle and Danube Blue inks, shape and adhere around the lilacs and sentiment as shown with foam dots.

To finish, add Ultrafine Glitter to the house image with Dries Clear Glue.

Other Products: Smooth White Cardstock, Zig Clean Clear Brush Markers, Water Color Brush, Cracked Pistachio Distress Ink.

For more tips on creating with the Lush Lilac collection, watch the tutorial at https://youtu.be/KDbdzC0MnAI.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: To create a side-fold card, cut a smooth white cardstock measuring 12" by 7 1/2". Score at 6" on the longer side and crease it using a bone folder.

Cut a smooth white cardstock measuring 5 1/2" by 7". The top most panel is distressed using Cracked Pistachio Distress Ink. Dab the ink pad on the craft sheet, spritz with water and build layers by picking the color from the craft mat. Dry between the layers. Once happy with the color effects, stamp randomly the bud spray from Lush Lilac Cling Stamp Set, using Leaf Green Archival ink. Add some splatters of Cracked Pistachio for extra effects.

Die cut and arrange a die cut from Classic Border Basic Die and several birdcages from white card stock, as shown. Glue birdcages together, one on top of the other, to create a sturdy piece.

Stamp the images from Sweet Lilac Scroll and Cage Stamp and Lush Lilac and Umbrella Spray, using Jet Black Archival ink and paint them using Zig Clean Clear Brush Markers.

For Flowers, stamp the images with Plum Archival Ink and cut them using its coordinating die. Color the flowers using mixed shades of Vibrant Fuchsia, Magenta Hue, and Majestic Violet. Shape the flowers using Lush Lilac shaping mold. 

Once all the elements are ready, assemble the card as shown. Also, stamp the sentiment to complete the card. Add some Crystal Clear powder for the extra accent to the card.

Other Products: White card stock, Deep purple card stock, Glitter powder, glossy accents

For more tips on creating with the Lush Lilac collection, watch the tutorial at https://youtu.be/KDbdzC0MnAI.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Cut a card base from white card stock--measuring 6 "x 6". Cut pattern paper from paper pad measuring 5.75" x 5.75". Adhere on the card front using clear glue. Cut another panel 5" x 5" from the paper pad and mat on deep purple card stock that is a little bigger than the card panel. Die cut a large square using the Cut and Mat and Create die A. Adhere on the card front using foam tape.

Die cut a square panel with birds from paper pad using a square die from Cut Mat Create B set and adhere on deep purple mat layer. Adhere this on the right base using foam dots. Die cut two Sweetheart Borders from white card stock and adhere on the two sides of the card front using clear glue.

Stamp several flowers from Lilac cling stamp using Deep Purple and Fuschia inks and colour with same inks using a sponge dauber. Die cut with coordinating die. Mold the flowers in the flower mold and then cup them using the Deluxe Flower Shaping Kit. Stamp several roses from the Classic Rose stamp set using Leaf Green ink, color with same ink and die cut with coordinating dies. Stamp rose leaves from same collection in Library Green ink, color with Leaf Green ink and die cut. Insert stamens in flowers as desired.

Die cut the prayer banner from pattern paper using the matching die and adhere along the top as shown. Similarly die cut the lilac Spray image from the Sweet Lilac Scroll and Notes stamp set from the pattern paper using the coordinating die. Adhere the die cuts on the card front using foam dots.

Add flowers and leaves on the die cut images. Fussy cut tags from pattern paper and create a purple cardstock mat. Stamp sentiments onto tags using Leaf Green and Majestic Violet ink. Add to the card front using foam dots. Add glossy accents to the flowers and leaves and finish by adding glitter powder.

Other Products: Card-stock: Kraft card-stock, Rose Beige Bazzill card-stock. Inks: Milled Lavender, Walnut Stain distress inks. Other: Versa-mark, Wow Sparkling snow embossing powder, Diamond Stickles, Hot Glue Gun, Water Mister, Fussy Cutting Scissors, Double sided Tape, Mauve Organza Ribbon, Misti Stamping Tool, Pencil, Washi Tape.

For more tips on creating with the Lush Lilac collection, watch the tutorial at https://youtu.be/KDbdzC0MnAI.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: The finished size of this tent fold card is 6in x 6in (15cm x 15cm) Taking the Kraft card-stock and cutting it to measure 6in x 12in (15cm x 30cm). Use the score-pal to make the fold for the tent fold card.

Taking the paper collection, find the design paper with the birds in it and the paper with the 3 tags. For the tags: Die cut the tags using the Luggage and Tags die set. Ink the edges of the tags with the walnut stain ink and daubers. For the card front: Taking the design paper, cut this to 3.94in x 4.92in (10cm x12.5cm). Take the Classic Border Basics die set and use the plain border die to cut the design paper in half from corner to corner. Ink all the edges of the cut design paper by using a dauber and the inks, milled lavender and walnut stain. Taking the rose beige card-stock cut 6in x 6in (15cm x 15cm) Place the cut design papers onto the cut card-stock a little from the straight edge then taking the pencil; draw the placement line for the lace border. Take the design paper away and die cut the borders using the placement lines. You will now have two card-stock fronts with a border. Ink both the lace border edges using the walnut stain distress ink and daubers. Adhere the card front layers together then adhere to the card front base, using the 3d foam dots, as seen in the card photo. Adhere the tags in place.

Taking the paper collection, find the paper with the lilac flower print. Using the versa-mark, embossing powder, stamp and the Misti stamping tool, stamp the flowers and buds. Taking the matching die set, die cut 23 flowers and 2 lilac bud images. Run the flowers through the vagabond machine using the Lush Lilac shaping mold to give shape to the lilacs and the buds also use the flower shaping tool kit.

Taking the organza ribbon, make a double triple bow. Adhere the bow to the card front under the tags. Adhere the flower buds and flowers to the ribbon knot with the hot glue gun. Arrange and adhere with the hot glue gun the rest of the lilac flowers to the tags, border and under the bird on the card front. To finish the card, add the diamond stickles to each of the lilac flower centers in the paper print. Add also to the lilac flowers if wanting more bling.

Other Products: Cardstock (White, Mauve), ColorBox Ink (Seaweed, Pixie, Hyacinth), Distress Oxide Ink (Seedless Preserves, Peeled Paint), Close To My Heart Ink (Eggplant, Chocolate), White Mesh Ribbon, Rhinestone Brads, Corner Rounder, Edge Distresser, Scrapbook Adhesives by 3L (3D Foam Squares, Crafty Foam Tape, Extreme Double Sided Tape, Dual Tip Glue Pen, Adhesive Dots- Micro, Creative Photo Corners- White)

For more tips on creating with the Lush Lilac collection, watch the tutorial at https://youtu.be/KDbdzC0MnAI.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Cream patterned paper is the background. Find and cut out the scroll journal block. Cut it in half length wise. Cut 2 pieces of the green patterned paper that are 2 x 1.25". Round 2 corners of each. Adhere the green pieces first to the top and bottom of the layout, and add the scroll pieces over top. Add the rhinestone brads to each.

Cut a strip of the green patterned paper that is 3 x12". Cut a strip of cream cardstock that is 3.5 x12" and distress the edges. Find and cut both of the purple scalloped borders. Adhere these layers together. Add the white mesh ribbon down the middle. Adhere across the middle of the layout.

Find and cut out the 6 x 6" purple card base with the green scalloped edge. Mat in cream cardstock and adhere to the middle of the layout using 3D foam. Mat the 4 x 4" photo in cream and mauve cardstock. Add white photo corners to the photo. Adhere to the middle of the layout using 3D foam.

All images are stamped onto white cardstock using dark brown ink. Stamp and die cut 4 of the small bud images. Add color using ink and daubers (Seedless Preserves, Peeled Paint). Die cut and shape using the Lush Lilac Shaping Mold. Stamp and die cut 2 of the large Lush Lilac image and 2 of the small Lush Lilac image. Add color using ink and daubers (Seaweed, Pixie, Hyacinth). Stamp and die cut 2 of the floral clusters from the Lush Lilac and Umbrella Spray set. I added color just to the leaves using ink and daubers (Seaweed). Cut just the leaves and shape. Stamp 3 sets of the mini flowers and add color using a mix of ink and daubers (Pixie, Hyacinth, Eggplant). Shape using the Lush Lilac Shaping Mold.

Adhere the mini flowers to the large and small lilac images. I used 7 on the small image and 11 on the large image. Add mauve Prills to the middle of each flower using liquid adhesive. Add Crystal Clear Glitter to the tips of all of the small lilac flowers. Let dry.

Adhere the large lilac images to the left and right of the matted photo using 3D foam. I also added the extra leaves around the base of the images. Adhere the small lilac images to the top and bottom of the matted photo. I also added the bud images around the base of these images. Find and cut out the "You Are My Everything" sentiment and flag either end. Adhere below the matted photo section of the layout using 3D foam.

Other Products: Memento Dye Ink Pad - Grape Jelly; Want2Scrap 72 Count - LeCreme Pearls; Want2Scrap 72 Count - Lavender Pearls.

For more tips on creating with the Lush Lilac collection, watch the tutorial at https://youtu.be/KDbdzC0MnAI.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Create a 6" x 6" card base out of white card stock. Cut a 6" x 6" card front from the Lush Lilac Paper Collection and sponge edge of card front with New Sprout Memento Ink. Die cut center using coordinating Die from the Circle Basics Large Die Set. Adhere 6" x 6" card front directly to card base with Dries Clear Adhesive.

Die cut green design paper using the eyelet circle die from the Eyelet Circle and Basics Small Die Set. On die cut circle image with Memento Grape Jelly Ink stamp the Praying for You sentiment from the Sweet Lilac Stamps and Scrolls Stamp Set onto the scroll image on the design paper. Matte die cut circle onto the die cut green eyelet circle and adhere to card front with pop dots.

On White Cardstock with Tuxedo Black Ink stamp the lilac petals with the Lush Lilac Cling Stamp Set; stamp the floral swirl image from the Lush Lilac and Umbrella Spray Stamp Set; and stamp several different sizes of the carnation petals using the Small Camelia Carnation Stamp Set. Cut all with coordinating dies.

Using the Stack and Store Daubers and Fantastix as needed, color all the leaves using New Sprout and Bamboo Memento Inks; color lilac images and carnation image with Lulu Lavender and Grape Jelly Memento Inks. Color half of the lilac petals with Lulu Lavender and Grape Jelly Memento Inks and color the other half of the lilac petals with Lulu Lavender Ink and Lilac Posies Memento Ink.

Lay the lilac petals colored side down in the Lush Lilac Shaping Mold and the carnation petals colored side down in the Floral Basics Shaping Floral Mold. Mist lightly with water and run through the die cutting machine to shape petals quickly. Cut the stamped die cut lilac swirl images, as needed to fit on the card as shown. Use the Deluxe Flower Shaping Kit to shape the lilac die cuts and adhere petals as desired to design paper. Assemble Carnation as shown and adhere to carnation image on swirl image and adhere to card as shown.

With Dries Clear Adhesive add Blue Rain Glitter to all the lilacs, carnations and butterfly and add Lichen Glitter to all the greenery and leaves. Finish by adding Lemon Chiffon Prills to the center of each lilac petal. Finally adhere Lavender Pearls and a LeCreme Pearl around the circle die cut, as shown.

Other Products: Copic Sketch R85, Cousin Glass Seed Beads Clear, Pink Thread, Distress Ink: Dusty Concord, Acetate, Versafine Imperial Purple ink.

For more tips on creating with the Lush Lilac collection, watch the tutorial at https://youtu.be/KDbdzC0MnAI.

Instructions: Click here to see more photos of this layered card. Cover your circle layered card with papers from the Lush Lilac collection using your circle die to cut out the card centers and dries clear adhesive to adhere them.

For your front cover you will fussy cut 4 total butterflies so that you can glue them back to back. Glue each butterfly to the piece of pink thread so it appears as if they are floating in the air and adhere over the opening as shown.

Once your butterflies are adhered, cover the front and back of the page with acetate then you will add your glass seed beads for a shaker card front.

For your flowers your will use your flowering dogwood die and cut a total of 6 flowers. Stamp using Versafine: Imperial Purple then add some deeper color to your petals by using the Tim Holtz Distress: Dusty Concord ink. Finally add a touch of pink to the flower centers with your copic sketch: R85. Pierce the centers and add your purple pearl stamens to your flowers centers and glue to your card front to complete the look. Fussy cut the leaves from your lush lilac collection for a fuller look.

Other Products: Stampin Up Ink Berry Burst, Powder Pink, Sweet Sugarplum, Lemon Lime Twist

For more tips on creating with the Lush Lilac collection, watch the tutorial at https://youtu.be/KDbdzC0MnAI.

Instructions: Origami Exploding Gift Box: Cut a piece of white cardstock 11 inches x 8 1/2 inches. With the 8 1/2 inches side across the top, score at 2 3/4 inches and 5 3/4 inches. With the 11-inch side across the top score at 1 3/8 inches, 4 1/8 inches, 6 7/8 inches and 9 5/8 inches. Score at 2 1/2 inches and 8 3/4 inches ONLY from the top and bottom edges to the first intersecting score line. In all four corners cut on the 2 1/4 inch and 8 3/4 inches vertical score lines from the top edge down to the first intersection horizontal score line. On that same horizontal score line, cut from the 1 3/8 inches to 4 1/8 inches and 6 7/8 inches to 9 5/8 inches line. Turn the cardstock over 180 degrees and repeat on bottom edge. An image of the box scoring and cutting can be located here. Fold back and forth on all score lines. Bring the two outside sections together to form the two side lids. Leave the middle section open to form the exploding segment and to place images on.

Stamp, die cut and color with berry burst, powder pink, sweet sugarplum and lemon lime twist two lilac bushes for the outside side lids, two small vines for the inside middle lids, two umbrellas for the middle inside box and one butterfly. Die cut one 12 x 12 pages of the lilac petals from the paper collection. Shape each of these flowers with the Deluxe Flower Shaping Kit. Glue six sets of three of these flowers together for the outside of the box. Shape twenty-five lilac petals for the inside of the middle of the box. Cut four pieces of lavender paper at 2 3/4 inches by 2 3/4 inches and glue to the four sides of the outside of the box using dries clear adhesive. Cut two borders 1 3/8 inches x 8 1/4 inches and glue to the three sides of each of the side outside lids. Cut four pieces of lavender paper at 1 3/4 inches by 2 3/4 inches and glue to the outside side panels. Cut two pieces of pink paper 2 3/4 inches by 2 3/4 inches and glue to the inside side lids. Cut two pieces of pink paper 2 5/8 inches by 2 5/8 inches and glue to the inside middle panels. Cut four pieces of pink paper 1 3/4 inches by 2 3/4 inches and glue to the inside side panels. Glue the two small vines to the inside panels and the Two lilac bushes to the outside panels. Glue one umbrella to the middle inside panel. Glue the second umbrella pop up on the middle inside panel. Arrange and glue into place the lilac panels. On the outside panel glue three lilac panels to each top border piece.

Other Products: Creme cardstock, Lilac cardstock, Cutting machine (Big Shot), Scissor, Ribbon, Pearl pen Creme, distress tool, Distress Ink Vintage photo, Fine liner, Rope.

For more tips on creating with the Lush Lilac collection, watch the tutorial at https://youtu.be/KDbdzC0MnAI.

Instructions: Cut a piece of Creme Cardstock at 10 x 5 inches and score on the short side 1/2 inch, now cut a piece of creme cardstock at 9 1/2 x 5 inches and glue this one on the flap, then you have your double card. On the open side make a mark in the middle at 2.5 inches in then cut out that V shape. Distress all the edges with the Distress tool and Ink them with the Vintage Photo. Cut from Lilac cardstock a piece of 9 x 4 1/2 and cut a V shape out, then a piece from the paper collection and cut this at 8 x 4 and cut out a V shape. Ink this one too with Vintage Photo, glue all the pieces on top of the card and put small lines with the Fine liner on the top one to make it look like stitches.

Now stamp with Black Tuxedo Ink the Lush Lilac stamp set and the rain Boots and Blossoms stamp set, color all the flowers with the Sweet Plum, Lulu Lavender and the leaves with bamboo Leaves, cut them all out with the coordinating dies, and shape them with the Deluxe shaping set. Make holes in all the small lilac flowers, cut the stamens in half and put a stamen in all of the flowers. Stamp on Lilac cardstock some carnations and cut them out with the coordinating dies, wet them and shape them on your Deluxe shaping tool set. Put some dots on some flower ends with the pearl pen. Cut out a flag with the young at heart die and write the words "a new home" on it.

For the inside you cut a piece of creme cardstock at 2 inches, the width of the card and glue them on 2 sides in the card as a pocket, then cut a nice border with the ornate borders and pockets die and glue this one on the pocket on 3 sides, then you have 2 pockets. Cover it with a piece of paper from the collection and ink the sides. Now cut a piece of Creme cardstock of 5 x 3 and cut 2 edges and round 2 corners, make a hole in the top and pull a ribbon through it and wrap a piece of rope around that, Ink the edges.

Other Products: 3D foam tape, Waterproof black ink, hot glue gun, purple pigment ink , oil soft pastels royal blue, purple, light green, pink and brown

For more tips on creating with the Lush Lilac collection, watch the tutorial at https://youtu.be/KDbdzC0MnAI.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Take an 8 1/2 x 11" white pearl cardstock, score and fold at 5 1/2". This will be your card base. Select paper from Lush Lilac Paper Collection and cut to size of your card base leaving a 1/16" border on each side and attach to the card base using Dries Clear Adhesive.

Stamp the Lush Lilac Cling Stamp Set on paper with purple ink and cut using the coordinating dies. Colour with purple and pink soft oil pastels. You will need about 2 sets of stamped flowers. To shape flowers use Lush Lilac Shaping Mold, spray with water and place on plates, put through machine, let dry. Sponge with glue, sprinkle glitter.

Stamp Lush Lilac Cling Stamp Set two times, Lush Lilac & Umbrella Spray Cling Stamp Set and color with soft oil pastels, cut all using coordinating dies, decorate with ready prepared Lush Lilac flowers.

Cut out cage from Sweet Lilac Scroll & Cage Die and adhere to the base. Ready prepared elements place as shown using 3d tape, cut out sentiment choosing one from paper collection.

Other Products: Distress Ink (Picked Raspberry), Foam tape, double sided tape, Sizzix, Trimmer, Stamens, Zig brushes, Heat Embossing Ink , White Embossing Powder.

For more tips on creating with the Lush Lilac collection, watch the tutorial at https://youtu.be/KDbdzC0MnAI.

Instructions: We wish happiness and love for the perfect friend and the best friendship. This card will be for those who cherish friendship and some special friends in their life. This card measures 7"x 4.5" with a decorative panel holding the message. Take a white card stock and cut and score it at 7"x 4.5" which forms the card base and the first layer. Take a silver card stock and cut it at 1/8" smaller than the white card stock and glue it to the card base. Take another pattern paper with another 1/8" smaller and then with foam adhesive lay it on the silver card base. For the top layer die cut a pattern paper using a decorative border die and adhere it with foam to the base. This will make the card panel ready.

Stamp the lush lilac scroll image on a white card stock using plum archival ink. Using zig brushes color and shade the scroll and then punch a hole at the top. Tie a piece of twine at the top. Stamp the sentiment For my friend using plum archival ink. For the flowers and branches stamp using the Lush lilac cling stamp and Sweet Lilac scroll and notes set using plum archival ink. Die cut all the pieces and then color all elements using Zig brushes. Stamp several pieces of the lush lilac small flowers using plum archival ink from a white card stock and some using heat embossing with white powder. Shade some flowers using blue violet and tuck them with white center stamen. Die cut all the pieces. Shade and color them using Deep Purple and Vibrant Fuchsia archival ink. Spray the die cut with water and then shape the petals. Insert one single stamen in each of the flowers and leave it for drying.

Once all dried start assembling all the elements around the scroll note. Insert all the flowers at centers and filer space around the branches. While placing the stamped scroll image ensure the die cut piece is shaped a little and also placed on foam adhesive.

Other Products: Canson water paper; Distress inks: seedless preserve; vintage photo. Prima resin oval frame, prima metal heart, steam punk button corners; glass seed beads; Art Anthology paints and sprays; Craft Medley wooden gears. Gold Alchemy Wax; gel medium; heat tool.

For more tips on creating with the Lush Lilac collection, watch the tutorial at https://youtu.be/KDbdzC0MnAI.

For more tips on creating with the journals, watch the tutorial at https://youtu.be/fw4lcnn_9zU.

Instructions: Cut paper to fit front and back of album which is approx. 8.75 x 8". I wanted to be sure to leave a white border all the way around. Cut 4 panels from collection measuring 5 x 7"; ink and distress all the edges, some with seedless preserves others with vintage photo. On the top 5 x 7" panel I decided to create a mixed media cover using some metals from my stash.

Gesso all your embellishments first then attach the heart to the resin frame. Place a steam punk heart button in the center of the heart and add some seed beads, gesso these. Gesso some wooden gears. Heat set to dry. Color with art anthology sprays and mists.

Gesso the center area of a 5 x 7" front panel, attach the mixed media items we prepared, tuck in some added gears as shown. I adhered all the heavy embellishments to the cover with gel medium

Using some seed beads, I added these to other areas on the cover just by using art institute dries clear and coloring them with alchemy wax. I used a chipboard title from creative embellishments and colored it with alchemy wax too. Attach all the papers to the cover as shown. I did add some alchemy wax to the base of the embellishments to add some highlight.

Other Products: White card stock, Pearls, Foam Tape, Copic Markers-BV000,BV00, BV01, BV02, BV13, V01, V12, V15, V99, V25, Y11, Y17, G82, G21, YG61, R20, R22, B21, B45, B34, B00, E51, E53, E31, E33, E35, Pretty Petunia VersaMagic, Grape Jelly Memento, purple rhinestones, ribbon.

For more tips on creating with the Camelia Carnation collection, watch the tutorial at https://youtu.be/rhk76SAIgWQ.

For more tips on creating with the Lush Lilac collection, watch the tutorial at https://youtu.be/KDbdzC0MnAI.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Click here to view the inside of the card. Card size: 6 X 6". Using the circles in each page as a template, cut 2 pieces of decorative paper for each page with the appropriate sized circle opening. Glue tunnel book together and glue each panel to the front and back matching circle openings. Make a white circle frame for each page, each side of the page. Starting at the front, glue Decorative Medallion (die cut from white) onto the top lavender frame (it fits perfectly) and add a string of pearls to the top edge of die. Decorate bottom with a stamped, die cut and colored umbrella and blossoms (stamped in black) plus extra blossoms (stamped with Grape Jelly Memento). Next page is decorated with large Lush Lilac and butterflies (stamped in black) along with extra blossoms (stamped in Grape Jelly). The back of page 2 is decorated with white fence and Delicate Border die cut, the scroll and Woodsy Critter birds. Page 3 is decorated with long and short Lilac Sprays and white fence. The back of page 3 is decorated with 2 small tags. Page 4 is decorated with 2 small lilac branch clusters and the Lush Lilac and Umbrella spray (stamped in black) and extra blossoms stamped with Grape Jelly, I used the carnation in place of the other flower in that spray. The back of page 4 is decorated with blossoms from Rain Boots and Blossoms and a large butterfly. Page 5 is decorated with another white Decorative Medallion and pearls plus a large and small Lilac spray with extra blossoms at the bottom right.

Sponge glue randomly on paper where flowers are on each page front and back and glitter as you go. Sponge glue on all blossoms and glitter then add a gold Prill to each blossom center. Add purple rhinestones to butterfly heads on purple butterflies. Edge both Decorative Medallion dies with pearls. Add dyed ribbon to tags.

Other Products: Morning Dew Nuvo Crystal Drops, Jute Twine, ribbons, Ebosser, beads & embroidery hoop.

For more tips on creating with the Lush Lilac collection, watch the tutorial at https://youtu.be/KDbdzC0MnAI.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Click here to view a larger photo of this projectTake one part of the embroidery hoop and wrap the Jute twine over it to cover it completely. Take some jute twine and braid it to make the loop to hang the dream catcher. Make the web pattern inside the hoop using some more jute twine and beads. Make the danglers using jute twine, ribbons & beads.

Stamp the images from Lush Lilac Cling Stamp Set and Lush Lilac & Umbrella Spray Cling Stamp Set using Jet Black Ranger Archival Ink on white cardstock. Cut them using matching dies from Lush Lilac Die and Lush Lilac & Umbrella Spray Die and ink them with Leaf Green and Library Green Ranger Archival Inks using Stack and Store Daubers. Shape them using Deluxe Flower Shaping Kit. Adhere them on the left side of the dream-catcher as shown.

Stamp the Lilac flowers from Lush Lilac Cling Stamp Set on a piece of white cardstock using Cactus Flower Ranger Archival Ink, die cut them using matching die from Lush Lilac Die and color them with Cactus Flower and Vibrant Fuchsia Ranger Archival Ink using Stack and Store Daubers. Shape them using Deluxe Flower Shaping Kit or Lush Lilac Mold. Add Pastel Pearl Stamens to make the flower centers.

Stamp the carnation flowers from Small Camelia Carnation Cling Stamp Set on a piece of white cardstock using Tiger Lily Ranger Archival Ink Pad, die cut them using matching die from Small Camelia Carnation Die and color them with Vibrant Fuchsia Ranger Archival Ink using Stack and Store Daubers. Shape them using Deluxe Flower Shaping Kit. Add Pastel Pearl Stamens to make the flower centers.

Arrange and adhere all the flowers on the leaves cluster on the dream catcher as shown. Add some Morning Dew Nuvo Crystal Drops to the flowers and leaves to make dew drops. Make tiny ladybugs using Ebony Black and Red Berry Nuvo Crystal Drops and glue them to the flower arrangement to add the finishing touch.

Other Products: White Cardstock, Dusty Concord and Shaded Lilac Distress Inks, Dimensional Tape

For more tips on creating with the Lush Lilac collection, watch the tutorial at https://youtu.be/KDbdzC0MnAI.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: My card is 6 X 6". Make card base and cover with one of the card fronts from the paper collection. Set aside to let the glue dry.

Using Tuxedo Black Memento Ink stamp the Lilac image and the Lilac petals. I colored the flower petals before I cut them out. Cut out the Lilac image and use the Dove Blender Pen and ink to color. I added the crystal clear and set aside to dry. I ran the flower petals through the Lush Lilac mold and then used my flower shaping kit to give the flowers just a bit more dimension.

I added Prills to the centers and some Crystal Clear and when everything was dry I glued the flowers to the lilac image and then I used dimensional tape to adhere to the card front. I also added some Crystal clear here and there on the card front.

Other Products: White and Purple cardstock.

For more tips on creating with the Lush Lilac collection, watch the tutorial at https://youtu.be/KDbdzC0MnAI.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Begin by making your card base from White cardstock 5 x 7" and topping it with a piece of purple and another piece of white cut 1/4 inch smaller. Round the corners of all and glue together.

Stamp the Lush Lilac image in the center with black ink and color in with the Bamboo Leaves and Lulu Lavender. Stamp the birds on white card stock with the black ink, color with the Summer Sky and Toffee Crunch. Die cut and adhere one on each side of the flower cluster.

From the paper collection, locate and die cut the lilac petals, place in the Lush Lilac Mold and run through the die cutting machine, finish shaping with the deluxe flower shaping kit and adhere to the card on top of the image. Die cut the swirl out from the Cut Mat Create die and cut in two, place one on one side and the other on the other side as shown.

Stamp the sentiment on white with black ink, trim, round the corners and mat on top of a piece of purple card stock, add D-Dots to the back and adhere to card. To finish, add Crystal Clear to the flower petals and Crystal Drops to the center of each petal. Add 3 Crystal Drops to the upper, right hand corner.

Other Products: Flower Tape, Flower wires, Ribbon, Die Cutting Machine, Distress Inks Wilted Violet and Milled Lavender.

For more tips on creating with the Lush Lilac collection, watch the tutorial at https://youtu.be/KDbdzC0MnAI.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: 6 x 6" Easel card. Begin by taking two 6 x 6" cards and gluing them together to make your base card.  Take Two of the same topper panels and cut out the centre circle from one of them with you largest circle from the Eyelet Circle Basic dies. Lay this on top of your card and draw inside the die, lay the die back on top of the card and run through your Die cutting machine.

Glue a Topper inside your card and on to the base of your card. Add a piece of acetate over the circle of the card then adhere the topper. Cut out from Lilac card the Bird cage die, adhere this to the front of your card adding a bow to the top of your Birdcage and add one of the sentiments.

Stamp the Lush Lilac flowers with Wilted Violet Distress Ink and shade with Milled Lavender. Put these through your Embossing Machine in the Lush Lilac Mold. Take you pokey tool from the Flower Deluxe Flower shaping Kit, pierce a small hole in the centre of each flower and add one Stamen to each from the Pastel Pearl Stamens. Use Flower tape to add these to Flower wires and make a Lilac shaped head. Glue this to the base of your card with your hot glue gun then add some loose flowers to the birdcage and add another sentiment to the base of the card for a stopper .

Other Products: Pearl White Metallic Cardstock, Dimensional Tape, Sponge, Hot Glue Gun, Misti, Big Shot Plus, Scissor, Quickie Glue Pen.

For more tips on creating with the Lush Lilac collection, watch the tutorial at https://youtu.be/KDbdzC0MnAI.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Cut a piece of White pearl metallic cardstock 6" x 12". Score at 3" and 9" and fold to create a 6" square gatefold card. Cut the lavender paper from the paper collection as follows: 4 pieces 2 7/8" x 5 7/8" each and one piece 5 7/8" x 5 7/8". Use the outer edge of the decorative Sweetheart Borders die to cut the two folded panels on the card and all of the designer 2 7/8" x 5 7/8" pieces. Diecut the decorative Sweetheart die twice from white pearl metallic cardstock and cut the border die once.

Adhere magnets on both panels of the gatefold and also on the base so the card closes securely. Ink the edges of all the inside designer papers with Deep Purple ink. Adhere the top border die behind the 5 7/8" x 5 7/8" panel and adhere all the designer papers to the card base using dries clear adhesive. Adhere the decorative Sweetheart diecuts to the front of the card as shown.

Cut the sprays from the paper collection using coordinating dies. Diecut them again from white cardstock and adhere together to form a stronger spray. Spritz with water and shape with the Deluxe Flower Shaping Kit.

Stamp the lush lilac flowers on white cardstock using Archival Deep Purple ink, color with Memento Lulu Lavender and diecut using the coordinating die. Ink the edges of all the flowers with Deep Purple. Place face down in the Lilac 3D Mold, spritz with water and run through the die cutting machine. Place on the molding mat and use a stylus to press down in the center of each flower. When dry, sponge with dries clear adhesive and sprinkle with Rajni Chawla's Crystal Clear glitter. Put a small drop of glue in the flower centers and sprinkle with I Cannot Tell a Lilac Prills. Adhere the flowers to the lilac swirl using a hot glue gun and add prills to the lilacs on the swirl. Using the dimensional dots, adhere the lilac swirls to the card base as shown. Add ultrafine transparent glitter to the leaves.

Using the Luggage and Tags die, cut two of the smaller tags, ink the edges with Deep Purple ink and adhere inside the front card panels.

Other Products: Purple Card Stock, Spellbinders Labels 40 Decorative Elements, Spellbinders Labels Forty, Spellbinders Labels 50, White Card Stock, Versafine Imperial Purple Ink, Archival (Violet and Leaf Green) inks, Sparkle Glimmer Mist, Lavender Stickles, Pebbles Metallic Chalks, Ribbon and Bling from my stash and die cutting machine.

For more tips on creating with the Lush Lilac collection, watch the tutorial at https://youtu.be/KDbdzC0MnAI.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: To make this card start by making the base for this 5" x 7" easel card. Take a piece of Purple card stock that measures 5" x 12" and score at the 7" and 9 1/2" marks. Once your score lines have been sharpened with your bone folder cover the base with paper from the Lush Lilac Paper Collection. Once you have your first layer on, cut another piece of purple card stock 4" x 5 3/8" and attach it to the bottom of the card as shown layering with another piece of paper from the Lush Lilac Paper Collection. Finish off the center panel with die cuts from the Spellbinders die and now it's time to decorate! The lilac flowers were stamped on white card stock using Imperial Purple Ink and die cut with the matching die before distressing with Violet ink and shaping with the Lush Lilac Shaping Mold and finally lightly spraying with Sparkle Glimmer Mist before dusting with Crystal Clear Glitter and accenting the centers with Lavender Stickles.

The images were stamped on white card stock using Leaf Green ink and die cut using the matching dies before coloring with Pebbles Metallic Chalks. The sentiment was stamped on white card stock using Versamark and heat embossed with Fern Green embossing powder before die cutting with Spellbinders Labels 50. Finally, ribbon and bling were added as shown.

Other Products: White Cardstock. Zig marker

For more tips on creating with the Lush Lilac collection, watch the tutorial at https://youtu.be/KDbdzC0MnAI.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: 3 Fold flip fold album final size is 8"x8"

Adhere pattern paper on the cover from Lush Lilac paper collection size 7.875"x 7.875" and distress the edges with archival ink-leaf green. Now take another pattern paper and tear the edges as shown and distress the edges.

Before you adhere the torn paper, cut two sweetheart border dies and paste them under the torn paper. Now cut two Window Box Element die and one cage die and paste them as shown.

Next stamp three Sweet Lilac Scroll and Notes Cling Stamp with Jet Black Archival ink and cut them with matching die, colour them with Zig markers and then shape them with Deluxe flower shaping tool set.

Stamp Lush Lilac & Umbrella Spray Cling Stamp Set with Archival ink Jet Black, and die cut them with matching die and color them with Archival ink-Rose Madder and adhere them with foam tape.

Now stamp the Lush Lilac Cling Stamp Set using majestic violet archival ink, cut them out with matching die and color them with the same ink and shape them with 3D lush lilac shaping mold. Sponge with dries clear adhesive, sprinkle crystal clear powder, add prills at the centre of the flowers and arrange them as shown.

Cut one circle die from Eyelet Circle and Basics Small Die and adhere with foam tape on top of the torn paper.

Now add sentiment from the paper collection. Cover is ready. For inside view visit my blog.

Other Products: Violet cardstock, Distress Ink - Seedless Preserves, glue gun, double sided tape, floral wire, 1/16 in. craft punch, clear crackle paint.

For more tips on creating with the Lush Lilac collection, watch the tutorial at https://youtu.be/KDbdzC0MnAI.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Cut card base at 11 x 5 1/2 inches. Score at 5 1/2 inches. Cut the mat layer from violet cardstock at 5 1/4 inches x 5 1/4 inches. Adhere the layers with double sided tape.

Using the Regal Borders and Pockets Die, cut two borders from white cardstock to create a bellyband. Adhere to the violet cardstock using Designer Dries Clear Adhesive.

Stamp the dogwood flowers from the Flowering Dogwood Cling stamp set. I used Memento Desert Sand to stamp the image. The flower petals were die cut with the corresponding die. I placed a hole in the center with a 1/16 in. craft paper punch. The petals were sponged with Rose Coral and Lime Pastel ColorBox Fluid Chalk Ink. The Stack and Store Daubers work great to get into the small centers. The flowers were lightly spritzed with a mini mister and shaped using the Deluxe Flower Shaping Kit. The Small Pearl Pastel stamen were folded over floral wire and inserted through the hole in the center of the petals. The stamens were secured from the underside with a glue gun. The Leaves were stamped with Memento Olive Grove ink and lightly sponged with Lime Pastel Chalk ink.

The small lilac were stamped with Memento Elderberry Ink, with the Lush Lilac Cling Stamp Pad and die cut with the corresponding Lush Lilac Die. Punch hole in center of each petal with 1/16 in craft punch. Sponge the petal with Seedless Preserves Distress Ink. Lightly mist with water from a mini mister and shape the petals with the Lush Lilac Shaping Mold. Allow to dry. Cut the medium pastel pearl stamen through the center hole and secure from the back with a hot glue gun. Apply a very small amount of clear crackle paint to a few petals and lightly sprinkle Crystal Clear glitter.

Adhere the dogwood and lilac leaves to the bellyband for a finished creation for that special friend.

Other Products: White cardstock, pearl beads, water mister, dimensional adhesive, scissors, paper trimmer, die cutting machine

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Instructions: Cut white cardstock to 7 1/8 x 6 5/8", score and fold at 6 1/8". Cut another piece of white cardstock to 7 1/8 x 6 1/8" size and attach to the first piece to create card base. Cut a piece of pink patterned paper from the Classic Wedding paper collection to 7 x 6" size and layer onto card base. Using from the Classic Border Basics, diecut two 7" long borders out of white cardstock. Cut a 4 x 7" piece of light green patterned paper from Flowering Dogwood paper collection. Use the plain border of the Classic Border Basics to diecut edges of green panel. Sponge edges with Pistachio ink. Now attach white border strips along backside of coordinating green panel. Stamp sentiment in Olive pastel ink onto panel as pictured and layer onto card base.

Using from the Eyelet Circle and Basics, diecut the eyelet circle from same pink patterned paper as base layer. Stamp the Blushing Rose Background onto circle in Pistachio ink. Using from the Circle Basics Large, pair the 1st and 3rd largest die together on white cardstock to create a circle frame. Use dimensional adhesive to layer this onto pink eyelet circle. Apply Crystal Lacquer onto circle frame and sprinkle with Lichen glitter.

Stamp blazing poppy (4x) from Blazing Poppy Petals stamp set in Lipstick Red ink onto white cardstock and diecut with coordinating die. Stamp floral spray from Blushing Rose Swirls, leafy spray from Classic Rose Vines and leaf set (3x) from Botanical Rose stamp set ink Tuxedo Black ink onto white cardstock and diecut with coordinating dies. Stamp Blushing Rose Background in Olive Pastel ink onto white cardstock and diecut 'Beautiful' banner.

Use the Stack and Store daubers along with the following inks to color. For the poppies use Rose Coral. For the leaves use Olive Pastel and a touch of Rose Coral. Use Olive Pastel for the banner too. Use the Basic flower shaping mold for the poppy petals to achieve the desired look. Use the flower shaping kit to finish shaping poppies, leaves and banner. Assemble poppies, then layer leaves, banner and poppies onto card as pictured. Add pearl beads to the poppy centers. Use Dries Clear glue to add Lion's Mane glitter over poppies, pearl centers and Lichen glitter over leaves.