Other Products: White cardstock, acetate sheet, vellum paper, versamark, white embossing powder, Old jeans distress oxide, Fossilized amber distress oxide, Aquarium Archival ink.

For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.

For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.

Instructions: Click here to view photos of the inside of this project. Ready album measures 8" x 5 3/4" x 3". To prepare the cover, first take 2 pieces of chipboard measuring 8" x 5 3/4" each and 1 piece measuring 8" x 2 3/4". Glue the chipboard on the thick white cardstock, creating a book shape and bind it, making sure all of your chipboard is covered with thick white cardstock. Take a piece of white cardstock measuring 7 1/2" x 6 1/2". On the 6 1/2" side, score every 1/2", making a total of 12 score lines. Fold these accordion style, so that you have a 1/2" valley between your hills (apply glue to the inside of your hills, to keep them together). Glue these hinges inside the spine of the album (your pages will be adhered onto these hinges). Distress the edges of the album using Distress Oxide ink.

Cut 2 pieces of white cardstock measuring 7 13/16" x5 3/8" and 1 piece measuring 7 13/16" x 2 9/16" and adhere onto the front cover, back cover and spine using foam dots. Choose a pattern paper from the designer paper collection and cut 2 pieces measuring 7 5/8" x 5 1/8" and 1 piece measuring 7 5/8' x x 2 1/2". Round the corners and layer it on the white cardstock. Add metal chain for closing if desired.

To create pocket pages, take a piece of white cardstock measuring 5 1/4" x 15 1/4", score on 7 1/2" and 15" and crease well using bone folder. Place the Eyelet Oval die at the center of the page and die cut. Glue acetate sheet on the inside of both the front and back view of the page. Glue the 1/4" tab, at the bottom, this creates a page that you'll slide over the hinges already prepared. Choose patterned paper from the designer paper collection and cut a piece measuring 5 1/8" x 6 3/8". Diecut it also using eyelet oval die. Distress the edges of the pattern paper using same color ink and layer it on the page and round the corners. Die cut an oval frame from the white cardstock using eyelet oval die and glue it on the page as shown in the picture. Create 4 pages in the same process. Apply glue on the hinge and slide prepared page over it, adhering it securely.

To prepare photo mats, that slide inside the pocket pages, take a piece of white cardstock measuring 9 3/4" x 7 1/4", score on 4 7/8"and create a side fold card. Choose pattern paper from the designer paper collection and cut 2 pieces measuring 4 3/4" x 7 1/8". Stamp numerous hexagon shapes, color and diecut. Glue two together, back to back, to create a durable pull tab. Adhere onto the fold side of card. Distress the edges of the pattern paper and layer it on the front and back of the card. Cut the picture using eyelet oval die and glue it on the ready card base. Also cut an Oval frame from the white cardstock using eyelet oval die and glue it as shown in the picture. Create 4 cards in same process and put them inside the page pocket.

Create a pocket using Fleur Border Basics Die and add it on the first page of album. To create a waterfall card to add in the pocket, inside front cover, cut white cardstock 4" x 11". Score and fold at 5 1/2", choose designer paper to cover the front and inside of folded card. Cut 5 waterfall panels at 3 1/4 x 4", score and fold at 1/4". Adhere folded tab onto toward the bottom. Adhere another one above bottom waterfall, continuing until all 5 panels are adhered. Add photos as desired.

Using white cardstock diecut the following for use through out album. decorative medallion and outline, sentiment die and outline, eyelet accent tag. Stamp the rick rack on white cardstock, color, diecut and adhere onto cover of album.

Stamp flowers on the white cardstock using Buttons and Blooms stamp and cut with coordinating die. Slightly shape using deluxe flower shaping kit. Stamp button on the white cardstock using archival ink pad and cut with coordinating die. Glue 4 pieces of the buttons together and apply glossy accents on it. Glue the buttons on the flowers. Stamp leaves using rain boots and Blossoms stamp and leafy accents stamp on flower making paper and cut with coordinating die. Paint the leaves using leaf green archival and olive green archival. Shape the leaves using shaping mold. For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Stamp a pocket and pattern using Patchwork Pocket and Patterns stamp on vellum paper using VersaMark and heat emboss with white embossing powder. Cut with coordinating die and color with distress oxide. Glue flowers and leaves and embellishments on the pages as shown in the picture.

Other Products: Card stock, white, yellow, blue; Ranger Distress Ink, Faded Jeans; VersaMark Watermark Stamp Pad; Recollections embossing powder, Snow; craft foam; glossy accents; Stickles, Diamond; blue 1/8" ribbon; sequins; acetate

For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.

Instructions: Card base - cut a piece of white card stock 9 1/2" x 6", fold in half. Cut a piece of design paper 5 7/8" x 4 5/8"and adhere to card front. Cut a piece of blue card stock 5 5/8" x 4 3/8", adhere to card front. Cut a piece of white card stock 5 1/2" x 6". Measure down 3/4" from the top and die cut 4 chevrons 1/2" apart.

Stamp 5 chevrons on blue card stock with VersaMark and emboss with Snow embossing powder. Adhere the blue chevrons over the white. Die cut a frame from white card stock. Place over the chevron panel and then trim panel to fit frame. Cut acetate 4" x 5 1/4" and adhere to back of panel. Die cut frame and 5 chevrons from craft foam and add to back of panel. Add sequins. Cut a piece of design paper 4 1/8" x 5 3/8", adhere to back of shaker panel.

Stamp flowers and buttons on blue card stock with Faded Jeans and yellow card stock with Cantaloupe. Die cut with coordinating die. Layer flower and button and then add glossy accents to 3 buttons. Stamp arrow on white card stock with Cantaloupe and then add sentiment with Jet Black. Die cut with coordinating die.

Add shaker panel to card. Add arrow to bottom of card. Add flower to bottom right corner, 2 buttons to top corners. Add blue ribbon around edge of shaker panel.

Other Products: Paper trimmer, Gemini Die Cutting Machine, scissors, white card stock, assorted colored buttons, dimensional foam tape, scor tape, scissors

For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.

Instructions: Fold an 8 1/2 x 11" piece of white card stock in half to create a large card base. Select a background mat color you wish to use and trim it just slightly smaller than your card base. Ink all edges with Ranger Archival Ink - Coffee, and adhere to card base as shown.

Select another decorative paper to create a long center mat as shown. Ink all edges using a Ranger Archival Ink Pad - Coffee. Next, die cut two of the decorative strips from the Sweetheart Borders Die from white card stock. Adhere the two decorative strips together, overlapping one full scallop, using a dries clear glue. Measure to coordinate with the side of the center mat, snip to size, and adhere to center mat side as shown. Adhere to card base.

Using the Eyelet Rectangle and Basics Die, trim out the 4 1/4" x 5 1/2" frame from a dark blue patterned paper from the Buttons and Blooms Paper Collection. Next, trim out the larger rectangle stitched frame from the Hand-stitched Accents Die from a light blue patterned paper also from within the paper collection. Ink all edges with Ranger Archival Ink - Coffee, using stack and store dauber. Adhere matting panels together and adhere to card base using dimensional foam tape.

Select a premade card panel from the Buttons and Blooms Paper Collection with a small rounded rectangle image in the center. Using the Cut Mat Create 1A Die, cut out the center image. Ink all edges using Ranger Archival Ink - Coffee and adhere to layered mats on card base.

Die cut the largest decorative eyelet rectangle frame from the Eyelet Rectangle & Basics Die. Adhere to center of matted card base as shown.

Stamp the patchwork pocket and hexagon images onto white card stock using Ranger Archival Ink - Manganese Blue. Color pocket using stack and store dauber and Ranger Archival Ink - Manganese Blue. Color the decorative patches using Ranger Archival Ink - Leaf Green, Sunflower, Carnation Red, and Manganese Blue. Die cut using coordinating dies and adhere three patchwork accents to the upper corner of design as shown, and two to the opposite lower corner.

Stamp each size of blossom, as well as button images, onto white card stock using Ranger Archival Ink - Coffee. Using stack and store daubers, color largest flowers with Ranger Archival Ink - Buttercup, mid-sized flowers with Ranger Archival Ink - Carnation Red, and smallest flowers with Ranger Archival Ink - Cactus Flower. Die cut using coordinating dies. Ink all edges of the largest flowers with Ranger Archival Ink - Sunflower, the mid-sized flower edges with Ranger Archival Ink - Vermillion, and the smallest flower edges with the Ranger Archival Ink - Majestic Violet. Color buttons as desired.

Stamp two inkings of the swirling vine illustration from the Classic Rose Vines Cling Stamp Set onto white card stock using Ranger Archival Ink - Leaf Green. Color with stack and store daubers using a combination of Ranger Archival Ink - Leaf Green and Vivid Chartreuse. Die cut using the coordinating die. Shape slightly with Deluxe Flower Shaping Kit. Trim each foliage die cut into two pieces.

Next, stamp arrow image onto white card stock using Ranger Archival Ink - Manganese Blue. Stamp sentiment onto arrow using Ranger Archival Ink - Jet Black. Die cut arrow using coordinating die.

Adhere pocket die cut to card base using dimensional foam tape. Arrange and adhere flower clusters as shown, along with small button images as shown. Adhere sentiment to design using dimensional foam tape. Adhere real button centers to flowers as desired. Lastly, apply a thin layer of Designer Dries Clear Adhesive to each of the flower petals and glitter using Rajni Chawla's Crystal Clear.

Other Products: White Cardstock, Dimensional Tape, Hot Glue Gun

For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: My card size is 6 x 6". Make card base and cover with one of the card fronts. Using various ink colors stamp the flower petals and buttons and cut out using coordinating dies. Using Olive Green ink stamp the leaves and color with Bamboo Leaves ink. Layer the leaves into the mold and run through the Vagabond. Lay aside to dry. Now back to the flower petals. Use the Deluxe Flower Shaping Kit to shape the petals set aside to dry. Cover the buttons with 3D Crystal Lacquer and set aside to dry. Once dry glue to the centers of the flowers. Also glue one of the buttons to the pocket on the card front.

Using blue ink stamp the pattern pieces onto pieces of the paper collection. Cut out using the coordinating dies. Using dimensional tape adhere the piece that looks like ric rac to the top of the card. Also use dimensional tape to adhere the three other pattern pieces to the card front. Using the coordinating die cut out a ticket from the paper collection and adhere to the top using dimensional tape.

Decide on placement of flowers and leaves along the bottom of the card and using hot glue, glue them down. The card is now ready!

Other Products: White card stock, Sky Blue Brilliance, Lime Green Brilliance, Copic Markers-R21, R11, Y38, YG03, RV10, B00, RV02, YG23, embroidery floss, buttons, Glitter pens, foam tape

For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.

Instructions: Card Size: 5 3/4 x 5 3/4". Cut a piece of decorative paper 5 1/2 x 5 1/2" and glue it to a white folded card base. Die cut 4 frame pieces all the same size to make a square frame (use the frame die without inset to make a plain white frame). Use foam tape to attach frame to card front.

Stamp zig zag border 4 times, once with each color-Magenta Hue, Leaf Green, Tiger Lily and Forget-Me-Not, die cut and trim each piece to fit the frame then glue each piece onto center of each frame side. Stamp and die cut buttons in 4 colors (same as border pieces) color outside parts of flower buttons with orange, blue, pink, add floss to button holes and pop each up in a corner of the frame. Stamp and die cut pocket using Magenta Hue and add sentiment with Tiger Lily then sponge edges with Orchid and color button. Add Crystal Lacquer to the needle and glitter pen on the thread and also to the stitch lines of the borders. Foam tape pocket to card over bottom part of frame. Add pearl swirls coming out of pocket.

Stamp flowers in 3 sizes using Forget Me Not and sponge color on front and back, die cut. Form flowers and glue layers together. Add floss to buttons and glue to centers of flowers. Stamp, die cut and color leaves and heart flowers. Arrange all flowers and leaves to look like they are a bouquet in the pocket and also add in some green stamen in clusters to finish card.

Other Products: Glossy accents, twine, scoring board, Distress ink-picked Raspberry, 3d foam tape, white card stock

For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Use white card stock to make the card base. Cut card stock measuring 5 inches by 7 1/2 inches and 5 inches by 7 inches. Score at 1/2 inch on the longer side on the bigger card stock. Fold the flap. Apply clear glue inside the flap. Adhere the second piece on this to form a card base that measures 7 inches by 5 inches.

Cut a piece of white card stock 6 3/4 inches by 4 3/4 inches. Score at 1/8-inch intervals on the scoring board. Distress all over with Picked Raspberry distress ink. Adhere to the card front with foam tape.

Cut a piece of designer pattern paper from the paper collection to size 4 1/2 inches by 5 inches. Using the straight cutting edge of the basic borders die, cut along the base as shown. Cut a border die cut in white card stock and adhere along the cut curved edge of paper. Adhere this panel on the card mat layer with foam tape.

Cut a decorative die in white card stock and adhere to the top of the card

Stamp the flowers in yellow and red ink on white card stock. Color using the same colors using a dauber. Cut with matching die and shape a little using the flower shaping kit. Layer the flowers together. Stamp the buttons, color them and cut with matching die. Shape them and add Glossy Accents. Let dry.

Make leaves by stamping the leaves image from Leafy Accents stamp set with library green ink on white card stock. Colour using the green Archival inks. Cut with matching die and shape in the flower shaping mold for leafy accents.

Stamp a pocket image in yellow ink. Distress the edges with same color. Cut with matching die and adhere on the card front.

Arrange the flowers and leaves on the card. Stamp sentiments and add to the card. Add a twine and attach it to the needle on the image. Add a button on the pocket to finish.

Other Products: 3d foam pads, Black Cardstock, Silver Cardstock, Ochre Cardstock, 2 Paper Coaster, wool, Cutting machine, empty paper roll, Scor tape, Clear wire, Black fine liner, Silver marker, Glue gun, needle, Pins, Embellishment, small wooden spools, svg file

For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Click here to view a larger photo of this project. Take your black, silver and ochre cardstock and cut out this SVG file of the Scissor and pin cushion. Enlarge the file to 125% follow the instructions on how to put it together.

Take 2 paper coasters and cover them with paper from the paper collection and ink the edges, take a piece of the empty roll and cover this also with the design paper then glue it in between the 2 coasters, now you have a spool. Take the wool and run it around the spool and put a needle on the end and stick this as a decoration in the wool. Take the Scissor and glue this against the spool.

Put some wool in the holes of the pin cushion as if it is stitched. Make some stripes on it using a fine black marker, now you can stick some pins in it and cover the back with some white cardstock. Glue the pincushion next to the Scissor on the spool.

Take a strip of the design paper and make a tape measure with it using a silver and black marker, and glue this with a twirl on the top of the spool. Take a piece of clear wire and run this from the top through the scissors to the bottom, here you can glue some buttons on.

Using Rhubarb Stalk stamp the Oakberry Blossoms on white cardstock and cut them out with the coordinating dies, then color them with New Sprout in the middle and on the ends with Teal Zeal on the petals. Put them up side down in the 3D mold and mist them very lightly with water, you can put 3 layers in if you want. Put the top on the mold and run it through the machine. Glue 2 flowers on top of each other, make a hole in the middle and pull the stamens through. Then glue them on top and bottom of the spool.

Stamp using Tuxedo Black the Buttons and Blooms stamps on white cardstock, color them with the Buttercup, Teal Zeal and cut them out with the coordinating dies, you can glue them around the flowers on top and bottom of the spool, now put 3D Crystal lacquer on the flowers and let them dry.

Other Products: Smooth White Cardstock, Foam tape, Glossy Accents, Zig Clean Color Real Brush Markers

For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: The ready top-fold card from white cardstock measures, 9" by 5 1/4". Starting from the top panel, first, choose the paper from the designer paper collection. The top panel measures, 4 1/2" by 8 1/2". To create, we need a color combination of two pattern papers. Cut blue printed paper measuring 4 1/2" by 4" and light-yellow paper measuring 4 1/2" by 4 1/2". Adhere both the strips on a thin rough strip of paper. Neat the edges with the help of paper trimmer, if required. Paste the panel on the white cardstock, giving a slight white border on all sides. Set the Patchwork Pocket & Patterns Die on right and left side of the ready panel and run through die cutting machine to create the windows. Cut exactly same 4 panels from white cardstock and stack them together to get some dimensions. Choose the paper from the designer paper collection, and create the base for the windows. Create extra layers for the card front, one from white cardstock and other from light yellow cardstock for extra dimensions.

Embellishments: Stamp all the needed images from Buttons and Blooms Cling Stamp Set and Patchwork Pocket & Patterns Cling Stamp Set with black archival ink, cut them using their coordinating dies and paint them using Zig Clean Clear Brush Markers. The Buttons are painted and then given a coating of glossy accents. Stack a few extra die cuts to add extra strength to Birthday Wishes accent.

The leaves from Classic rose Collection are stamped with Olive green, painted using Leaf green and cut using it's coordinating die. Shape the leaves using Rose Shaping Mold. Once all the elements are ready, assemble the card as shown.

Other Products: Inks: Archival Ink (Cobalt) Paper: Bazzill Cardstock (Yellow, Blue), Cardstock 65lb. Smooth (White), Accessories: Diamond Glaze, foam dots, MISTI

For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Finished card size is 4 1/4" x 5 1/2". Cut 2 - 4 1/4" x 5 1/2" panels from yellow cardstock, glue one to front of card base and one to inside of card. Cut panel from patterned paper slightly smaller than the blue frame, glue to front of card. Using hand-stitched frame dies, cut a frame from blue cardstock, glue to front of card with foam dots as pictured.

Stamp buttons and blooms on white cardstock, I used several colors to coordinate with the images on the patterned paper, cut with coordinating dies. Stamp quilt patchwork patterns on white cardstock, cut with coordinating dies, using same color inks shade flowers, buttons and patchwork patterns. Stamp leaves on white cardstock with Leaf Green ink, cut with coordinating dies, shade with same color ink. Shape large leaves with coordinating 3D Leafy Accents shaping mold. Shape small leafy branch with flower shaping kit. Glue leaves. Glue buttons on flowers. Glue patchwork and flowers with foam dots for dimension.

Cut a panel from patterned paper, ink edges with vibrant fuchsia ink, stamp sentiment with cobalt ink. Cut an ornamental tag, cut tag apart using only top and bottom decorative edge to frame the top and bottom of the sentiment panel. Glue diecut pieces as pictured, glue panel to inside of card as pictured.

Other Products: Foam tape, Imagine If.. Mannequin chipboard, White Gesso, Jo Sonja Pearl White paint, Pink bow, VersaMark ink, Vellum, Pearl string

For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Cut a piece of white cardstock 10" x 7", score at 5" along the long side and fold to create a 5" x 7" base card. Cut a piece of blue patterned paper 5" x 7" and adhere to the front of the card. Cut the frame from the HCD2-7191 Intricate Swirls Frame Die in white cardstock and adhere to the front of the card with foam tape. Cut a 6" x 4" panel from the paper collection and adhere to the front of the frame. Add pearls to the edge of the paper.

Paint the mannequin with white gesso and then two coats of Pearl White paint. Add Frosting powder to the mannequin with Dries Clear glue on a damp sponge. Adhere the mannequin to the front of the card and finish with a pink bow.

Stamp the rose vine images from the HCPC-3834 Leafy Accents Stamp set in Library Green ink on white cardstock and colour in with Leaf Green and Fern Green inks before die cutting with the coordinating die. Shape using the coordinating mold. Add Crystal Clear glitter to the leaves using Dries Clear glue with a damp sponge. Adhere the leaves around the base of the mannequin and the top right of the card.

Stamp the flower images in VersaMark ink on vellum and emboss with white embossing powder. Colour the images in a combination of Vibrant Fuchsia, Forget-Me-Knot and Buttercup inks before die cutting with the coordinating dies. Shape lightly and add Crystal Clear glitter with Dries Clear glue and a damp sponge. Adhere over the leaves as shown.

Stamp the banner image and the Happy Birthday image from the HCPC-3851 Handstitched Accents Stamp set in Forget-Me-Knot ink on the zig zag patterned paper and die cut with the coordinating die. Nestle the dove tailed edge under the flowers on the top right of the card.

Other Products: Pineapple punch, pumpkin pie ink, Blueberry bushel ink - stampin up!, black memento ink, , walnut stain embossing powder - Tim Holtz, wet glue, silicone glue, small box (I found this one in a UK craft and book store), Collall glue, nail file

For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.

Instructions: Click here to view a larger photo of this project. Make the flowers: Stamp in black memento ink and cover in walnut stain distress embossing powder. Remove excess powder and heat to set. Colour using Pineapple punch and pumpkin pie ink and die cut.

Make the buttons: Stamp the buttons on paper from the pad using black ink and die cut. Cover with 3D crystal lacquer and allow to dry. Shape using the flower shaping kit and add to the centre of the flower using silicone glue.

Unscrew all the hinges and clasps and set aside.

Ink around the edges of the box using Blueberry bushel ink.

Cut panels of paper from the pad slightly smaller than the box sides and glue into place using the collall glue. For the curved edges - slightly dampen along the curved edge and use a strong nail file to trim away excess.

When the glue has dried ink around all the edges with Blueberry bushel ink and replace all the clasps and hinges.

Add the flowers using wet glue, curling some around the edges of the box.

Other Products: Pineapple punch, pumpkin pie ink, Blueberry bushel ink & Night of navy card stock - stampin up!, black memento ink, white cardstock, walnut stain embossing powder - Tim Holtz, wet glue, silicone glue, clear embossing powder,

For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.

For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.

Instructions: Click here to view a larger photo of this project. Make the flowers: Stamp in black memento ink and cover in walnut stain distress embossing powder. Remove excess powder and heat to set. Colour using Pineapple punch and pumpkin pie ink and die cut.

Make the buttons: Stamp the buttons on paper from the pad using black ink and die cut. Cover with 3D crystal lacquer and allow to dry. Shape using the flower shaping kit and add to the centre of the flower using silicone glue.

Score a 6.5" x 9" piece of night of navy card stock at 4.5" to give you a 4.5" x 6.5" card base. Line the die up to the folded edge so that it hangs over the fold and does not cut the edge. Secure in place with tape and die cut to give you a shaped base card.

Cut a single complete tag from night of navy cardstock and another from the paper pad. Layer these together and glue to the card base. Diecut a thin frame using the 2 tag dies and glue onto the card base to frame it.

Add the flowers using wet glue, cutting off the petals where the flowers overlap the frame.

Stamp the sentiment onto white cardstock in Blueberry bushel ink and cover in clear embossing powder, remove the excess and heat to set. Die cut the sentiment using the arrow & banner die set and shape the sentiment before adding to the card using wet glue.

Other Products: Cardstock- White, Tonic Edge Distresser, Navy Silk Ribbon, Ivory Burlap String, ColorBox Ink (Seaweed, Sailboat, Green Apple, Candy), Stampin Up Ink (Crushed Curry), Distress Oxide Ink (Faded Jeans, Spiced Marmalade, Broken China), Versa Color Ink (Seafoam), Scrapbook Adhesives by 3L (Crafty Foam Tape, 3D Foam Squares, Adhesive Dots Medium, E-Z Runner Grand)

For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: The blue patterned paper is the background. Cut a small triangle of yellow patterned paper, and a 0.75" strip of the same yellow patterned paper. Find and cut out the dark blue border strip. Adhere the 2 strips of patterned paper to the bottom of the layout. Using the long, scalloped rectangle die, cut one from white cardstock. Cut in half length way. Adhere to the edges of the yellow patterned triangle. Adhere to the top left-hand corner of the layout using crafty foam tape. Die cut 2 of the swirly frame die from white cardstock. Cut 2 small pieces to fit inside of the frames that are 0.75 x 3.25".

For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4. Die cut out the large yellow tag and the yellow tag at the bottom of the layout using the coordinating dies. Run the silk ribbon through the tag at the bottom of the layout and wrap around the back and adhere. Find and cut out the "A Time to Remember" sentiment, mat in white cardstock and adhere to the yellow tag at the bottom.

Double mat the 4 x 6" photo in white cardstock. Mat the small photo in one layer of white cardstock. Adhere the 2 matted photos together, slightly overlapping. Adhere to the layout using 3D foam squares. Add the large tag to the top of the matted 4 x 6 and the swirly frames to either side of it. Add a bow of burlap string to the large tag.

Using the Leafy Accents stamps and dies, stamp and die cut 1 set of the large swirly leaves, and 3 of the three-leaf image using dark green ink (Seaweed). Add color to the leaves using ink and daubers (Green Apple). Stamp and die cut 2 sets of the medium flowers using blue (Sailboat) and yellow (Crushed Curry) ink. Stamp and die cut 3 sets of small flowers using orange (Spiced Marmalade), yellow (Crushed Curry), and pink (Berrylicious) ink. Add color to the flowers using ink and daubers: Blue (Faded Jeans), yellow (Crushed Curry), orange (Spiced Marmalade), pink (Candy).

Stamp and die cut 4 sets of the button images in the following colors: Pink (Berrylicious), Teal (Broken China), Blue (Sailboat), Yellow (Crushed Curry). Add color using ink and daubers: Pink (Candy), Teal (Seafoam), Blue (Faded Jeans), Yellow (Crushed Curry). Using 3D Crystal Lacquer add adhesive on top of all of the button images and let dry.Shape all of the flowers using the 3D Floral Basics Shaping Mold. Shape all of the leaves using the 3D Leafy Accents Shaping Mold. Assemble the layered flowers and add a button to the middle of each using a small 3D foam square.

Add the flowers to the layout first. Then add the leaves using adhesive dots. Add a single button to the yellow patterned triangle.

Other Products: White cardstock, Clear Drying Glue, 3D Foam Tape, Pencil Colors, Archival Ink Saffron and Cobalt

For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: The finished card measures 6 x 7. Cut white cardstock 12 x 7, score at 6 from the longest side and fold. Cut pattern paper from the paper collection 5-3/4 x -3/4 and adhere on the top of white cardstock with clear dry glue.

Cut blue color pattern paper from the paper collection 3 1/2 x 5 1/2". Adhere in the center of the card with 3D foam tape.

Die cut white cardstock using Sweetheart Borders Die two times and adhere with clear drying glue on the upper and lower sides of the 3 1/2 x 5 1/2" pattern paper in the center.

Die cut white cardstock using Intricate Swirl Frames Die and adhere in the center of the card. Stamp the inner part of the Intricate Swirl Frame with a sentiment and sponge with Archival ink - Cobalt

Stamp white cardstock with images from Patchwork Pocket & Patterns Cling Stamp Set and cut using coordinating die. Color the images with pencil colors.

For flowers stamp white cardstock with Buttons and Blooms Cling Stamp Set using Archival ink -Pink Peony. Stamp the button images with Archival ink jet Black. Die cut the images using the coordinating die. Color the flower petals using the Archival ink Pink Peony and the center button image with Archival ink Saffron and Cobalt.

Stamp white cardstock with Leafy Accents Cling Stamp Set using Archival ink - Library Green, die cut using coordinating die. Color the leaves using Archival ink - Olive and colorbox ink Olive Pastel. Shape the leaves using Leafy Accents Shaping Mold.

Once all the elements are ready arrange them as shown. Apply glitter on the flowers with clear drying glue.

Other Products: White cardstock. Beads String.

For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.

Instructions: Card size 6" x 6" (final size). Take pattern paper from the Buttons and Blooms Collection and tear the edges and adhere it on the card base. Take one tag and distress the edges and then tear the edges and adhere it with foam tape.

Cut decorative medallion die twice on white cardstock and adhere it as shown.

Now stamp one pocket image from Patchwork Pocket and Patterns Cling Stamp Set with archival ink-jet black and cut it with coordinating die and color with archival ink-rose madder and adhere it with foam tape to give some dimension. Stamp sentiment on the pocket image with archival ink-jet black.

Now stamp some flowers and buttons from Buttons and Blooms Cling Stamp Set with archival ink-plum and garden patina on white cardstock and cut them with coordinating die and color them with archival ink-sunshine, rose madder, cactus flower, garden patina (as shown). Then adhere two layers of petals to make one flower, add the button at the centre of the flower and then add some crystal clear glitter on the petals.

Arrange the flowers on the card and add some bead strings as shown.

Other Products: Distress Peeled Paint Ink, White Cardstock, Diamond Stickles, Assorted Buttons

For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Using your Buttons and Blooms stamp, stamp the medium size flower in morocco, lilac posies and buttercup, stamp the small flower in teal zeal and lightly shade all the flowers with their matching colors and die cut with coordinating die. Shape with your deluxe flower shaping kit.

Using your leafy accents stamp, stamp your flourish leaves using your peeled paint ink and color with same ink. Die cut with coordinating dies and shape in the 3D shaping mold.

Using your Patchwork Pockets stamp, stamp the pocket with teal zeal, shade your pocket as pictured. Stamp with the "hope you're on the mend" sentiment from the Hand Stitched Accents stamp set and die cut with coordinating die.

Using your Buttons and Blooms Paper Pad cut the background mat 7 1/2" x 5 3/4". Using a light blue cardstock from your paper collection die cut a frame from your Intricate Die set. Die cut the inner patterned mat 4" x 6".

Cut your white card base 11 1/2" x 7 1/2" and using a bone folder for a cleaner line fold in half. Using your 2 dies from your Hand Stitched Accents die, use both to create a frame and die cut in white. Cut in half on the diagonal to create 2 corners.

Adhere your front patterned mat. Adhere your blue intricate die mat. Adhere your diagonal corners to the back of your front patterned mat, one in the top left and one in the bottom right. Using 3D dots adhere to your card front. Line up your flourish leaves and adhere. Using 3D dots adhere your pocket. Using 3D dots adhere your flowers. Decorate with stickles as desired.

Other Products: Die Cutting Machine

For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Create a card base 7 x 5.5 inches in white cardstock. Cut and distress strips of yellow and blue paper from the Buttons and Blooms Paper Collection for each end of the card. Cut the 6 inch square from the paper collection with the blue frame and cut out the center. Raise the frame with foam dots over a background of the yellow paper with the blue stripes and a white cardstock mat. Adhere a Sweetheart Borders Die to each side of the frame and adhere the frame to the center of the card as shown.

Stamp buttons from the Buttons and Blooms set in black, cut out with coordinating dies and sponge with Buttercup and Leaf Green inks. Cut out extra buttons with the Buttons and Blooms Die and glue multiple layers together to give the buttons a realistic thickness. Sponge the sides with ink and cover the buttons with 3D Crystal Lacquer.

To create the flowers, stamp the large and medium flowers from the Buttons and Blooms set in Danube Blue and sponge with same, cut out with corresponding dies, and sponge edges with same. Stamp the small flowers from the Classic Buttons and Blooms set in Buttercup and Black Cherry and sponge with same, cut out with corresponding dies, and sponge edges with same. For Leaves, stamp the flowers in Leaf Green, once sponged and cut out, cut petals apart to use as leaves. Use 3D Floral Basics Shaping mold to sculpt flowers, see video for details on the Shaping Molds. Add a small button to each flower center. Add Crystal Clear glitter.

Stamp, and sponge leaves from the Leafy Accents set in Bamboo Leaves, cut out with corresponding dies and sculpt with the 3D Leafy Accents Shaping Mold.

Stamp the pocket from the Patchwork Pockets and Patterns set in Danube Blue, cut out with coordinating die and sponge with same ink. Adhere in the center of the frame with foam dots, adhere button to the pocket and to the right side of the frame.

Stamp the banner and sentiment from the Handstitched Accents set in Danube Blue and cut out with coordinating die, sponge with same ink. Sculpt and adhere to the left side of frame.

Put the two sides of the Delicate Border Basics Die together and cut out in white cardstock, adhere to bottom of the frame.

Adhere leaves and flowers as shown.

Other Products: White, Yellow, Blue, Rose, Green colored cardstock, foam dots, clear embossing powder,

For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Prepare a card base 5 x 7", layer a piece of the Buttons and Blooms paper 1/4 inch smaller on top. Cut 4 of the corner pieces out of blue cardstock using the Album Tags and Accents die, adhere one in each corner.

Stamp the pocket on blue cardstock with the Manganese ink, cover with clear embossing powder, heat set, cut out with the coordinating die. Stamp the sentiment in the middle of the pocket, heat set it the same way. Add foam dots to the back and adhere to card.

Stamp the flowers and buttons on the colored cardstock, heat set, and cut out with coordinating dies, shape using the Deluxe Flower Shaping kit.

Stamp the leaves on Green cardstock with the Library Green ink, cut out with coordinating die, shape using the mold and adhere to card. Add flowers on top of the leaves. Add the buttons to the center of each flower and the pocket as shown.

To finish, add the glitter to the leaves and flowers and Crystal Lacquer to the buttons.

Other Products: Hot Glue Gun, Sponge, Misti, Big Shot Plus, Scissor, Floral Oriental Cardstock, Ranger Archival Ink Pad-Cobalt, Yellow cardstock, Blue cardstock, Sparkle Sheer Shimmer Spritz, Dimensional tape, Dimensional dots, VersaMark, WOW Sparkling Snow Embossing Glitter, ribbon from my stash

For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.

For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.

Instructions: Click here to see a larger photo of this project. Card is 6 x 5". Score and fold 12 x 5 1/2" white cardstock at 6" on the long side. Using the largest tag die from the Album Tags and Accent Die, cut the card base. Make sure the left side of the die is placed just past the fold. Cut another piece of white cardstock and the plaid paper from the collection also with the largest tag die. Adhere these two pieces together using dries clear adhesive. Using the two largest tag dies, cut a frame from white cardstock. Cut the fan shaped die from the Frame a Card Leafy Borders die from white cardstock. Sponge both of these diecuts with dries clear adhesive and sprinkle with crystal ultrafine transparent glitter. Adhere the frame to the front as shown. Adhere the fan to back so that just part of it shows. Adhere this top tag to the card base. Cut another piece of the designer paper from the second largest tag die, ink with cobalt blue ink and adhere to the inside of the card.

Diecut the eyelet die from white cardstock using the Album Tags and Accents Die set. Stamp the sentiment on blue cardstock using VersaMark, sprinkle with WOW Sparkling Snow Embossing Glitter and heat set using the Heat It Tool. Diecut using the inside die from the same die set, adhere to the white diecut using dries clear adhesive and then adhere to the card base using dimensional tape.

Stamp the buttons on white cardstock using Sunflower ink and diecut using the coordinating die. Stamp the largest Bloom on yellow cardstock using Sunflower Archival ink, diecut using the coordinating die, shape using the Deluxe Flower Shaping kit and adhere the two petals together to create one large flower, add a button to the center using a small dimensional dot and spray with Sparkle Sheer Shimmer Spritz. Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal Clear glitter.

Stamp the Leafy Accents leaves on white cardstock using Archival Olive ink, color with the same ink, highlight with a little Berrylicious ink, diecut using the coordinating dies and shape using the Leafy Accents Mold. Spray with Sparkle Sheer Shimmer Spritz and let dry. Sponge with dries clear adhesive and sprinkle with Rajni Chawla's Crystal Clear glitter.

Adhere the leaves and flower to the card base as shown using a hot glue gun. Punch a hole in the top of the card front and add a ribbon.

Other Products: Die cutting machine, Hot glue gun

For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Create a 6 x 6" card base  from white paper. Cut a piece of paper from the Buttons and Blooms Paper Collection 5 3/4 " x 5 3/4 " and adhere to the card base using Dries Clear Adhesive. Choose second layer paper using the Buttons and Blooms Paper Collection.

To create pocket, use paper from Buttons and Blooms Paper Collection, chose zigzag pattern stamp using Patchwork Pocket & Patterns Cling Stamp set. Stamp with Ranger Archival Ink Pad - Garden Patina and cut with matching die from Patchwork Pocket & Patterns Die. Adhere to the card base using 3d foam tape.

To create birthday sentiment, stamp Hand-stitched Accents Cling Stamp with Ranger Archival Ink Pad - Garden Patina ink, cut using the coordinating dies and adhere to the card base using 3d foam tape.

To create flowers, stamp Buttons and Blooms Cling Stamp on foam paper with Ranger Archival Ink Pad - Garden Patina ink and cut using the coordinating dies. Colour with Memento Dye Ink Pad - Lulu Lavender ink. You will need two petals for each flower to create flowers. Colour buttons with Ranger Archival Ink Pad - Garden Patina.

Use an iron or heat gun to heat the petals and then shape using your fingers. Sponge the petals with dries clear adhesive and sprinkle with Ultrafine transparent glitter. Layer the petals together using the hot glue gun making sure to offset them. Use a paper piercer to make a hole in the middle and pull through the black stamens from the Bright Bead - Medium set. Add a little hot glue to the underside of the flower to adhere. Sponge the petals with dries clear adhesive and sprinkle with Crystal Ultrafine Transparent Glitter and Rajni Chawla's Crystal Clear glitter.

Stamp the leaves using Leafy Accents Cling Stamp Set on the white paper with StazOn Ink Pad - Olive Green, cut out with the coordinating die, shade use this same ink and shape. Shape leaves using Leafy Accents Shaping Mold. Adhere the flowers and leaves using a hot glue gun.

Other Products: Brown Twine, Foam Squares, Paper Distresser, Score Board, Honey Suckle Glitter

For more tips on creating with the Young at Heart collection, watch the tutorial at https://youtu.be/kmqAVM6ibfM.

For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.

Instructions: Overall Card size is 6 x 6". Cut white cardstock to 12 x 6". Score and fold at 6", then diecut card base with the plain eyelet accent shape. Choose your paper from the Young at Heart Paper Pad and cut 3 pieces. The largest cut at 5 7/8 x 5 7/8". The second paper cut to 5 9/16 x 5 9/16". Cut the smallest paper to 5 5/16 x 5 5/16". Using your distressing tool, distress the two smallest papers. On the smallest paper, tear in spots as desired. Adhere all three papers together before die cutting using the plain eyelet accent shape. Adhere onto your card base.

Stamp the truck, and rock terrain in black ink onto white cardstock and die cut. Color the base of the truck with Sky Blue ink, blended with Forget Me Not ink. Use Vivid Chartreuse and Leaf Green on the foliage, Pink Peony on the tiny flowers. Color rocks, hub cap and bumper very lightly black ink. Using Carnation Red ink on white cardstock, ink only one word at a time from the Happy Father's Day stamp, cleaning stamp after each word has been stamped. Then diecut each word individually using the arrow die, alternating the direction of the arrows. Die cut the plain strip from the Tickets and Tags die set as your post for the sign. Color all of the Father's Day sign pieces in Vivid Chartreuse and Leaf Green ink. Shape all pieces as desired using the Deluxe Flower shaping kit.

Diecut 4 layers from white cardstock using both eyelet accent shape dies to create a frame. Color one piece with Buttercup ink along with a dauber, then adhere the rest together to create a thick dimensional frame. Use dauber to sponge Dries Clear glue onto yellow frame and sprinkle with glitter, allow to dry. Stamp inside sentiment on white cardstock using Plum ink and die cut with plain eyelet accents shape die, ink the edges with Butter Cup ink and very lightly add Sky Blue ink on the lettering of the sentiment. Adhere both the frame and the inside sentiment onto card.

Stamp love sentiment in Plum ink and die cut using the rounded top tag die. Die cut 3 more tag shapes and adhere together. Ink the back side and front with Buttercup ink. Die cut 2 oval tags from the paper pad, one for the front and one for the back, then diecut an additional 2 from white cardstock and adhere together. Add Crystal Lacquer on the tag, allow to dry, then add it on the back of each tag, and allow to dry completely.

Adhere all pieces to card as shown and add glitter on card as desired. To complete, tie tags onto card base using brown twine.