Other Products: White Cardstock, Dimensional Adhesive, Art Institute Clementine Glitter, Scissors, Paper Trimmer, Die Cutting Machine

For more tips on creating with the Young at Heart collection, watch the tutorial at https://youtu.be/kmqAVM6ibfM.

Instructions: Cut white cardstock to 12 x 4" size, score and fold at 6" to create the card base. From the Young at Heart paper, cut the 6 x 6" panel to 4" x 6" size. Use the window die to diecut window opening from panel and card base. Sponge edges of panel with Rouge ink and attach directly onto the card base. Cut another piece of paper from the collection to 4 x 6" size to fit the inside of card.

Stamp the window frame from HCPC-3794 Window Frame, foliage 2x from HCPC-3801 Simply Classic and small set of florals from HCPC-3769 Wildwood Florals stamp set in Teal Zeal ink onto white cardstock and diecut with coordinating dies. Stamp sentiment banner and bicycle from HCPC-3800 Young At Heart and small set of florals from HCPC-3769 Wildwood Florals stamp set in Rouge ink onto white cardstock and diecut with coordinating dies. 

Use the Stack and Store daubers along with the following inks to color the images. For the edges of window frame and window panes use Pearlescent Jade ink. Use Sunflower Yellow on main part of bicycle and Pearlescent Jade on seat, handles and basket. Use New Sprout on the leaves. On the pink small florals, use Sunflower Yellow in the centers and Rouge on the edges. On the teal small florals, use Sunflower Yellow in the centers and Teal Zeal on the edges. For the banner, softly use Sunflower Yellow in the center and Rouge along the edges. Use the Deluxe Flower Shaping kit to shape florals, leaves, bicycle and banner. 

Use glue and dimensional adhesive to attach the window frame and panes, florals, leaves, bicycle and banner onto card as shown. Use Dries Clear glue to add a touch of Clementine glitter onto card as desired. Use the same glue along with You Had Me at Yellow prills on the centers of florals.

Other Products: Picked Raspberry Distress ink, Black Archival ink, Gansai Tambi Watercolors, Koi Waterbrush, Ebosser, Martha Stewart scoreboard, white & watercolor cardstock, pearls & adhesive.

For more tips on creating with this collection watch the tutorial at https://youtu.be/kmqAVM6ibfM.

Instructions: Cut a 4 3/4" x 6 3/4" piece of pattern paper from Young At Heart Paper Collection and adhere it to 5" x 7" white card base. Take a 5 3/4" x 4" piece of pattern paper from same Paper Collection and adhere it to 6" x 4 1/4" of white cardstock. Die cut 3 pieces of white cardstock using the die from Window Box Elements Die. Glue these pieces as shown. Adhere this piece on the card front as shown.

Stamp the sentiment from Good Times Sentiments Stamp Set with Black Archival ink on a piece of white cardstock & cut the 2 right corners. Adhere it on a slightly larger piece of cardstock inked with Picked Raspberry Distress ink. Adhere it to the card front using foam adhesive.

Stamp the car image from Simply Classic Stamp Set on a piece of watercolor cardstock using Black Archival Ink. Color it using Gansai Tambi watercolors & Koi Waterbrush. Die cut it using matching die from Simply Classic Die. Die cut 5 more pieces of white cardstock using the same die. Stack & adhere all of them together. Ahere it to the card front as shown. Add some pearls to the die cuts for finishing touch.

Other Products: X-acto knife, Brads, Twine, 3D Foam squares, Scissors, Archival Black ink, Colorbox Dark Brown ink

For more tips on creating with the Young at Heart collection, watch the tutorial at https://youtu.be/kmqAVM6ibfM.

Instructions: The card size is 5 1/2" x 5 1/2". Die cut front of card base using the Cut Mat Create 2A die (make sure it's centered). I inked the edges using Rhubarb Stalk ink along with a dauber. Find the panel of your choice from the Young At Heart paper pad and die cut the center using the Cut Mat Create 2A die. Choose another designer paper for the background. I cut this at 5" x 5", and adhered on the inside of card.

Stamp two truck images and one leaf image in Archival Black ink on white cardstock and die cut with coordinating dies. Color the leaf with New Sprout ink and Bamboo Leaves ink. Color the two truck images with Canteloupe Peanut Brittle, New Sprout and Rounge inks. I also used the Dove Blender pen very lightly with black ink to add color to the chrome pieces on the truck. On the top truck image I trimmed off the wheels. Using an X-acto knife cut open the door. Adhere pieces of clear cardstock behind the windshield and the door window (to make it appear as if the window was partially rolled down).Gently shape truck using the flower shaping kit. Adhere both truck images together using foam dots and Dries Clear adhesive. Adhere to inside of card.

Stamp 5 journey signs and two puppy borders using Dark Brown ink on white cardstock and die cut. Trim out the puppy you've chosen to use. I colored both puppy images using Rich Cocoa and Potter's Clay ink. Shape with the flower shaping kit and adhere together using dries clear and foam squares as needed. Color two journey signs using Colorbox Dark Brown ink. Color remaining signs using Rhubarb stalk, lightly at the top and heavier at the bottom. Die cut the words and adhere the layers together to create dimension. Adhere die cut letters to sign and add brads. Cut apart leaves and arrange on the second layer of sign. Add twine to sign and adhere two signs together. Wrap twine around panel frame and adhere on the back. Adhere panel using 3D foam dots to card front. 

Adhere as shown and add crystal glitter to the leaves, flowers and grass.

Other Products: Canvas Corp Brands 12 x 12 Red Cardstock; Art Glitter Ultrafine Transparent - Ensalada, Wildwood, Just Peachy and Tropical Rain; Art Glitter Ultrafine Opaque Hologram - Beltone; Ultra Fine Flower Soft - Sand; Want2Scrap 72 Count - Red Rhinestones

For more tips on creating with the Young at Heart collection, watch the tutorial at https://youtu.be/kmqAVM6ibfM.

Instructions: Create a 6" x 6" card base out of the Red Cardstock. Cut a 6" x 6" card front from the Young at Heart Paper Collection. Die cut the center image using the coordinating die from the Circles Basic Die Set. Sponge edge of 6" x 6" card front with Rose Coral Chalk Ink and then adhere to card base with pop dots.

Adhere die cut circle directly to card base with Dries Clear adhesive. Cut the "good times" sentiment from the design paper and sponge edges with Rhubarb Stalk Memento Ink. Adhere to card as shown using pop dots and Dries Clear Adhesive as needed. 

On White Cardstock with Tuxedo Black Memento Ink stamp the palm tree and flowers from the Palm Tree and Monkeys Stamp Set and stamp the coconut from the Monkey Antics Stamp Set. Die cut all with their coordinating dies. 

Color the coconuts with New Sprout and then Peanut Brittle Memento Inks; the Palm Tree trunk with Desert Sand Ink and then add Rich Cocoa Memento Ink to the edges of the trunk and the palm leaves with New Sprout and add highlights with Bamboo Leaves Memento Ink. Color the flowers using a Fantastix to add Rose Coral Chalk Ink to the centers of the blossoms and New Sprout and Bamboo Leaves Memento Inks to the leaves. 

Shape all dies cuts with the Deluxe Flower Shaping Tools. Cut the trunk of the palm tree so that it can be tucked down into the die cut circle and adhere trunk to design paper image with Dries Clear Adhesive and adhere the top of the tree with pop dots to create dimension. Adhere the coconut to the bottom right corner with a pop dot. Cut the flowers apart and adhere to sentiment as shown. 

With Dries Clear Adhesive add Coral See Prills to the flower centers, add Ensalada Glitter to the leaves and the die cut palm branches and the leaves and branches on the design paper, add Wildwood Glitter to the coconuts and the tree trunks, add Just Peachy Glitter to the flowers; add Tropical Rain Glitter to the truck and the ocean and add a combination of Beltone Hologram Glitter and Sand Flower Soft to the beach. Finish by adhering a Red Rhinestone as shown.

Other Products: White cardstock, Black cardstock, Distress inks Peacock Feather, Vintage Photo, Peeled Paint, Archival Inks Black, Coffee Brown, Olive Green, Fern Green and Library Green, Foam tapes, Acetate paper, Tacky glue, Versamark, Heat gun, Clear UTEE, Wired pollens, Zig clean clear brush markers

For more tips on creating with the Young at Heart collection, watch the tutorial at https://youtu.be/kmqAVM6ibfM.

To see how to shape the petunia, watch the video at https://youtu.be/KOy_qNB9OAk.

Instructions: The ready card measures 6 1/2" by 61/2". The first top layer is from black cardstock which has a mat of pattern paper from the designer paper collection. Choose a 6" by 6 " card panel from the paper collection and trim off the outer frame. Also, using the Cut Mat Create 2A die, cut out the center of the card panel. Layer this panel on the card front using foam tapes. To embellish the card collect all supplies listed above.

Stamp the window from the Window Frame Cling Stamp Set from Winter's Eve Collection in black archival ink and cut using it's coordinating die. Adhere an acetate sheet behind the window and distress the whole window with Peacock Feather and Vintage Photo. Layer the window on pattern paper using foam tapes. Adhere decorative elements, cut the Window Box Elements Die from white cardstock and decorate the window. 

For the vintage car, stamp the image with black archival ink, cut using it's coordinating die and paint the image using Zig Clean Clear Brush Markers. Decorate the car with tiny fillers from Wildwood Cottage collection. Also, the Wedding bells from Classic Wedding Collection are stamped with black archival, cut using their coordinating dies and painted using Zig Markers. The wedding ring and the couple is colored using steadtler pencil colors. 

For Petunias, stamp multiple images of medium Petunias and small petunias, cut using their coordinating dies and color them using Magenta Hue and Tea Rose. Shape the flowers using Deluxe Flower Shaping Kit and add Crystal Clear to sparkle the flowers.

Stamp the leaves from the Classic Rose Collection, color, cut with coordinating die, shape with the Deluxe Flower Shaping Kit and glitter with Rajni Chawla’s Crystal Clear.   

The fence and the gate from Wildwood Cottage Collection is stamped, cut and then colored using Peacock Feather Distress Ink. 

Two pieces of foliage leaves from Tropical Paradise Collection are stamped, cut and then colored using Peeled Paint and glazed with clear UTEE.

Once all the elements are ready, assemble the card as shown. The flower bouquet on the top has lacy Medallion die as a base. To finish the card cut a sentiment from the paper collection and add it on the top left side corner of the card.

Other products:  Archival inks-Tea Rose, Rose Madder, Library Green, Leaf Green, Forget Me Not, micro pollens, Glossy Accents,  White card stock, Ranger distress glitter

For more tips on creating with this collection watch the tutorial at https://youtu.be/kmqAVM6ibfM.

Instructions: Cut a card base from white card stock 6" x 6". Cut a pattern paper with 6" card panel design from paper collection and adhere to the card front using Dries Clear Adhesive.  

Cut out a window from the front using the Cut Mat Create square die. Cut out an image of the plane from the paper collection using the Young at Heart die and adhere the plane on the card window with dries clear adhesive. 

Cut another 6 " card panel design from the paper stack and adhere inside the card.

Stamp images of Delightful Daisies with blue and peach archival ink and cut with coordinating die. Stamp and cut the leaves also. Colour the flowers and leaves with archival inks using Stack and Store Daubers. Shape using the Deluxe Flower Shaping Kit and layer them together with pollens. Apply glossy accents and distress glitter on the flowers.

Arrange the flowers and leaves on the card as shown.

Stamp the sentiment and add to the card front. Cut a journal tag from the paper stack and add to the card on the left bottom.

Other Products: Corner Rounder

For more tips on creating with this collection watch the tutorial at https://youtu.be/kmqAVM6ibfM.

Instructions: Prepare a 5 x 7" card base out of the black cardstock, round 2 corners and layer a piece of the Young at Heart paper pack on top 1/4" smaller of the map, round 2 corners. Using the black cardstock die cut the Window box border, cut in half and place one on each end.

Die cut the Small oval out of black cardstock, place foam dots on the back and adhere to card. Die cut a white cardstock using the oval die, stamp the sentiment in black and adhere to the card. Stamp the leaves and flowers on white cardstock using black ink, color leaves with the Pistachio and the flowers with the Orchid, die cut, shape and add to the top of the oval.

Die cut the truck from the paper pad using the matching die, place foam dots at the bottom and adhere to card. Add Crystal Clear to the flowers as desired and allow to dry.

Other Products: Black 12” x 12” Metallic Cardstock, Pearl White 12” x 12” Metallic Cardstock,  Black Textured Leather Look Cardstock, Brads, Distress Oxide Ink Soot Black.

For more tips on creating with the Young at Heart collection, watch the tutorial at https://youtu.be/kmqAVM6ibfM.

To see how to shape the plumeria, watch the video at https://youtu.be/x_ehd8QAPnI.

Instructions: Suit case is 4” x 8” x 2” deep. Top: Cut a piece of black metallic cardstock 6” x 10” and score at 1” on all sides.  Bottom:  Cut a piece of black metallic cardstock 12” x 8” and score at 2” on all sides. Cut a slit on the score line on all of the corner squares and then small triangles on all corners. Cut those corner squares off on one of the long sides of the top. See more photos here http://www.janspaperflowers.com. Burnish the folds on the score lines and adhere the corners using Dries Clear Adhesive. Hold together with clips until the adhesive dries. When dry, adhere the flap you created by cutting off the corner squares to the back of the bottom piece creating a top that lifts up.  

Cut the world map paper from the Young at Heart paper collection as follows: 2 pieces 3 7/8” x 7 7/8” each, 1 piece 7 7/8” x  7/8”, 2 pieces 1 7/8” x 3 7/8” each, 2 pieces 7/8” x 3 7/8” each, 2 pieces 1 7/8" x 7 7/8". 

Cut the Textured leather cardstock: 2 pieces 1/2” x 8” for the straps and 2 pieces 1/2” x 6 1/8” for the handle. Adhere the 2 pieces for the handle together with dries clear adhesive to form a stronger handle.  

Ink all of the edges of the designer paper with Distress Oxide Black Soot Ink and adhere to the base using Dries Clear Adhesive.  Adhere the straps and the handle as shown and embellish with the brads. Cut some of the tags from the paper collection and adhere to the suitcase.  

Stamp the Tropical Plumeria Flowers with Pearlescent Jade Ink on white pearl metallic cardstock and color with Pearlescent Jade and Butter inks. Use the Deluxe Flower Shaping kit to shape the flowers. Add Rajni Chawla’s Crystal Clear to the flowers using a sponge and Dries Clear Adhesive. Add Dries Clear Adhesive and Aqua Net Prills to the centers.

Stamp the leaves on white pearl cardstock with Pearlescent Ivy ink, color and shape with the Deluxe Flower Shaping Kit.  Add Rajni Chawla’s Crystal Clear using a sponge and Dries Clear Adhesive. Adhere the flowers and the leaves to the suitcase as shown.

Other Products: Zig Clean Colour Brush Markers 045, 041, Heart of Gold Prills, Spellbinders Decorated Birthday die, SU Wild Wasabi Cardstock, Bristol Smooth Card, Memento Flannel Grey

For more tips on creating with the Young at Heart collection, watch the tutorial at https://youtu.be/kmqAVM6ibfM. 

Instructions: Finished card size is 5 1/2" x 6 1/4". Cut the base card using the Spellbinders Decorated Birthday die out of the green cardstock, creating the stepper card. Cut 1 piece of patterned paper 1" x 5 1/2", sponge the edges with Cantaloupe ink and adhere to the bottom of the card. Cut two pieces of patterned paper 1" x 1", sponge the edges with Cantaloupe ink and adhere to the side. Cut two pieces of patterned paper 1" x 3", sponge the edges with Cantaloupe ink and adhere along the long sides of the side step.

Cut 2 pieces of green cardstock 4 1/4" x 6 1/2", and using the leaf edge die from the Elegant Border Basics die set, die cut the top edge of both pieces of green cardstock. Adhere the two pieces together. Cut a piece of patterned paper 4 1/4" x 6", and using the edge die from the Classic Borders Basic die set, die cut the top edge to fit the green card. Trim to fit, sponge the edges with Cantaloupe ink and adhere to the green card. Adhere this to the card base with Dries Clear Glue.

Cut a piece of panel paper featuring the arch and penny farthing from the paper collection.  Die cut the oval die from the HCD1-7156 Eyelet Oval & Small Basics Oval.  Sponge the edges of the frame with Cantaloupe ink and adhere to the front of the green card with foam strips as shown.  Adhere the oval inner to the centre of the card with Dries Clear Glue.  Die cut the eyelet frame using the HCD1-7156 Eyelet Oval & Small Basics Oval outer eyelet die and the next size die and adhere to the edge of the oval.

Stamp the fence from the HCPC-37772 Wildwood Cottage Accents stamp set in Tuxedo Black ink on white cardstock and die cut using the coordinating die. Sponge lightly with Flannel Grey ink and trim and place on both the back steps of the card.

Stamp the bird and flower image from the Wildwood HCSD1-2913 Wildwood Bird Haven Stamp set in Tuxedo Black ink on white cardstock.  Using the sponge daubers colour the bird in Summer Sky and Cantaloupe inks, the flowers with Rouge ink and the leaves with Bamboo Leaves.   Die cut using the coordinating die, shape using The Deluxe Flower Shaping Kit and adhere to the right front of the oval as shown.

Stamp the flowers and leaves sprays from HCPC-3769 Wildwood Floral stamp set in Tuxedo Black on white cardstock.  Sponge the flowers with Rouge ink and the leaves with Bamboo Leaves before die cutting with the coordinating die. Shape the flowers and leaves using the Deluxe Flower Shaping Kit and adhere to the front of card and on the fences on the back steps. 

To make the extra flowers stamp the small flowers from the HCPC-3769 Wildwood Floral stamp set in Tuxedo Black ink on white cardstock.  Sponge with Cantaloupe ink and Rouge ink and die cut with the coordinating die.  Shape the flowers and adhere to the sprays of leaves and flowers as shown.

Stamp the grass images from the HCPC-37772 Wildwood Cottage Accents stamp set in Northern Pine ink on white cardstock, sponge with Bamboo Leaves and die cut using the coordinating die.  Add to the front of the card and adhere the yellow flowers as shown.

Stamp the small birds from the HCPC-3768 Woodsy Critters stamp set with Tuxedo Black ink on white cardstock and die cut with the coordinating die.  Sponge the top of the birds with Summer Sky ink and the bottoms of the birds with Cantaloupe ink.  Shape lightly using the Deluxe Flower Shaping Kit and adhere to the card as shown.

Add Heart of Gold Prills to the centre of the flowers, and using the Glue Gloss add Crystal Clear to the flowers.

Stamp the Happy Birthday sentiment from the HCPC-3802 Good Times Sentiment Stamp Set in StazOn Black ink on Bristol Smooth card. Colour with the Zig Clean Brush markers and die cut with the coordinating die. Add to the card on the top left as shown.

Other Products: White Card; Canson Water Color Paper, Archival Coffee Ink; Peeled Paint Distress Ink; vintage photo distress ink; Antique Linen Distress Ink;  Wild Honey Distress Ink; pollens; Brads; Finnabair mechanicals;. Zig markers 31; 33; 91;99; scor pal tape

For more tips on creating with the Young at Heart collection, watch the tutorial at https://youtu.be/kmqAVM6ibfM.

Instructions: Assemble Flipfold E and attach 6x6 papers to inside.  Add magnets to center of top flap and line up magnet on first bottom cover. I cut off the scallop part of the top flip and made it a straight cut. Attach papers and ink with vintage photo distress ink. 

On inside, cut out fleur border and use diagonally to create a pocket. Cut out journal tags to tuck inside. Stamp and out the chocolate sentiment and create into a tag and tuck in one of the panels.  

For outside of the album, use the Fleur basics to create a pocket on the front of the album using the die and cut a fleur border in white. 

Stamp out the trees (2) vine sprays from classic set and wildwood florals on white card using archival coffee ink.  Color with  distress inks. Stamp out truck on canson water color paper and color with zig markers. 

Assemble front of album beginning with fence from wildwood set; then add truck and tuck in palm tree.  I also cut a small flower pot and added some smaller florals with pollen. Detail with crystal clear.  

Belly Band: Cut two strips 1.5 x1 2” from white cardstock to wrap around the flipfold album, trim off excess. Adhere with strong double sided tape.  Cut out two strips 1” x 12 inches to cover the band.  Look for the road trip journal strip in collection and place across center of pattern paper.  Cut out the Adventure banner and pop on the belly band.

Add some wildwood florals and vine spray from classic set. Add pollen to center and detail with crystal clear. For more details you can click on this link:  https://karangerber.blogspot.com/2017/10/road-trip-adventure-mini-album.html.

Other Products: White Cardstock, Scor-Tape, Dimensional Tape, Wooden Knob, Green Acrylic Paint, E6000 glue

For more tips on creating with this collection watch the tutorial at https://youtu.be/kmqAVM6ibfM.

Instructions:  My little box is 2 1/2 X 4". The instructions for the box were found here.

I followed the instructions but didn't cut out the window. Before you put the box together measure and cut the panels to decorate and glue them down. I used Scor-Tape to put the box together because of the strength. I cut a strip of the paper to go around the bottom of the box as well as the top.

Next I painted the wooden knob and set it aside to dry. Once it is dry use the E6000 glue to adhere it to the box top. I just happened to have a color of paint that perfectly matched the paper. How often does that happen? To decorate the box I just found a sheet of the designer paper that had these images and I fussy cut the little scooter and used dies for the flags and signs. Dimensional tape is used to adhere them to the sides of the box.  I just love how this turned out, and it would hold quite a bit of something to be given as a gift. 

Other Products: Stickles, Spellbinders die, white cardstock, blue cardstock, scissors, bakers twine

For more tips on creating with this collection watch the tutorial at https://youtu.be/kmqAVM6ibfM.

Instructions: Card size 6" X 7". This card was very easy because I used the pre-cut foldout card and the card images on the designer paper from the Young At Heart Collection...I just had to die cut them! Die cut desired images as shown.

I added designer paper to each side of the foldout, die cut using the Fleur Border Basics die. Cut some grass using a scissors from other papers in the collection to make ground going all the way through the card when opened. I fussy cut the fence with the moped/scooter from the paper as well. 

Die cut the borders from blue cardstock using the Elegant Borders die and adhere along the top of the card. Die cut Regal Border from same blue cardstock and adhere along top of the last panel.

Stamp the Happy Birthday Banner in black ink on white cardstock and diecut. Stamp the sentiment inside on designer paper and die cut with the Spellbinders die. Stamp, die cut and colored the flowers and greenery too. I stamped the flowers in Teal Zeal, Potter's Clay, and leaves ink Bamboo Leaves ink. Color with coordinating colors, Summer Sky, Cantaloupe, New Sprout. Shape using the Flower Shaping Kit. Once my flowers were formed it was easy to put together. 

Arrange all as shown and adhere. I added bakers twine to hang the banner from the airplane. I added Stickles to the flowers and Prills to the centers.

Other Products: Pale Yellow Card Stock, Diamond Stickles, Water Mister, Inking tool, Bone folder,  Paper distressing tool, Scissors, Ruler, Glue dot, Gold button, 3d foam squares, Crafters Companion Country Garden 3d embossing folder, Renaissance Gold Gilding wax, Diamond Stickles, Double sided tape, Misti. Inks: Coffee Archival Ink, Black Archival Ink, Distress Inks: Walnut Stain, Forest Moss, Broken China, Mustard Seed. Spectrum Noir Blending colour pencils: Dove Grey C670, Windsor & Newton Oil colour low oder solvent, Blending stumps. 

For more tips on creating with the Young at Heart collection, watch the tutorial at https://youtu.be/kmqAVM6ibfM.

Instructions: The finished size of this tent fold card is 5 1/4” x 5 1/4” (13.5 cm x 13.5 cm). Take the white card stock to make the tent fold card base to the above measurements. 

Using the same card stock, stamp, die cut and colour the truck and sentiment from the Simply Classic and Young at Heart stamp and matching die sets with archival black ink. Taking the pale yellow card stock, stamp (using Coffee Archival Ink) die cut, colour and shape the flowers and leaf cluster from the Classic Rose Collection. To shape, mist the flowers and leaves with water and then use the Deluxe Flower Shaping Kit.  

Finding the checkered design paper from the collection, cut this a little smaller than the card front. Also find the blue coloured design paper, cut this 1/2” (1.2cm) smaller than the checkered paper. Distress the edges of both these papers then emboss them using the 3d embossing folder. Take the gilding wax and apply a small amount of the wax at a time, adding more of the wax as needed. Adhere both the matting papers to the card front. 

Adhere the truck with the 3d foam squares. Arrange and adhere the leaf cluster and flower to the the truck as shown. Using the glue dot adhere the gold button to the flower centre. Apply the clear drying glue where you will want the stones to be. Sprinkle the stones on the card. When the glue is dry shake off any extra stones. To finish the card, apply the diamond stickles to the truck window, wheels, flower tips and swirls.

Other Products: 3D foam tape

For instructions on how to assemble the Layered card watch this video https://www.heartfeltcreations.us/video/161/how-o-create-layered-cards-and-shadowboxes

Instructions: Take the ready Layered Circles Card-Kraft. Select the designer paper from the Young At Heart Paper Collection and cut to the size of box, die cut circle opening using Circle Basics Large Die, adhere it to each page using the dries clear glue. Die cut red circle frame using red designer paper and both the large circle and small circle. Adhere to cover as shown. Assemble pages, largest opening to smallest, and adhere.

Use ready images from paper collection and use coordinating dies to die cut cars, airplane etc. Cut out Tags from paper collection (with a scissors or paper cutter) place as shown.

Decorate all elements as shown using 3D foam tape. Apply dries clear adhesive where desired and sprinkle with Crystal Clear. Allow to dry.

Other Products:  Navy cardstock,  dark brown cardstock, Distress Tool, Heather Flower Soft, mini-dots, X-Press It, Trimmer, mini mister, Black colored pencil, sewing machine, four nickels, Detail Black embossing powder, Versamark, Heat Tool, Copic Alcohol Ink Markers - (Truck- B00, B21, B23, B29,YR20, YR23, YR26, E15, Sepia 0.03 multiliner, Greens/flowers -YG11, YG61, YG63, YG65, Tires/Crome - C0, C1, C3, C5, C7, Windows - B00, C0.

For more tips on creating with the Young at Heart collection, watch the tutorial at https://youtu.be/kmqAVM6ibfM.

To see how to shape the flowering dogwood, watch the video at https://youtu.be/gI8RqHAt3vE.

Instructions:  Create a 5 1/2 x 5 1/2 inch card base. Cut a navy base layer at 5 1/4 x 5 1/4. Cut two designer layers from the Simply Classic paper collection. Sew white stitching around the edges of the designer paper that will be on top. My tension is off on the sewing and I left it that way to add to the rustic, distressed look. Distress the edges.

The rusted, well loved truck was stamped with the Simply Classic Cling Stamp set using Tuxedo Black Memento Dye Ink. I used X-Press It but you can use any white Copic compatible paper of your choice.  I used the following color combo (Truck- B00, B21, B23, B29,YR20, YR23, YR26, E15, Sepia 0.03 multiliner, Greens/flowers - YG11, YG61, YG63, YG65, Tires/Crome - C0, C1, C3, C5, C7, Windows - B00, C0). Die cut the truck with the coordinating die.  Cut 2 additional images from dark cardstock. Adhere with Designer Dries Clear Adhesive for strength. Adhere 3D Crystal Lacquer to the windows and allow to dry. Apply flower soft to the bed of the truck.

The slider path can be cut with a slider die, free hand, or with Fleur Border Basic die.  I used the Fleur Border Basics. I positioned the die at a diagonal angle and only sandwiched the portion of the die I wanted to cut. The area that I did not want to cut extended off the edge of the cutting plates. I positioned it again to allow a 1/2 inch path and repeated the process. I drew some rocks around the path with a black Sharpie and shaded them with a black colored pencil. I extended the road on the adjacent page as shown.

Adhere the blue layer and plain designer paper on the front of the card base.  Apply double dimensional foam circles to the layer with the slider path to the top of the designer paper on the left. Make sure to not put the dots too close to the slider path - you will want plenty of room for the sider to move.  Adhere two stacked mini dots in between two nickels.  Adhere to the back portion of the truck. Add another two stacked mini dots in between two nickels and attach to the front part of the truck. Applying the sliding coins to the front and back of the truck will allow it to slide but not spin in a 360 degrees. This will just allow it to move along the path you created. Adhere flower soft along the edges of the road.

Stamp, color and die cut  five dogwood flowers from the Flowering Dogwood Set. Sponge the center with Lime Pastel Chalk Ink and sponge the tips with Berrylicious Ink. Stamp and die cut the green leaves from the Simply Classic Set. Color with Copic YG61, YG63 and YG65.  Shape the flowers and  and leaves with the Deluxe Flower Shaping Kit.  Adhere the stamen with Dries Clear Adhesive. Stamp and die cut the branches from the Winter's Eve Collection (Window Box Fillers). I trimmed the branches and used them for the dogwood tree branches.  Adhere the leaves, branches and flowers at the bottom of the card.

The word "JOURNEY" was stamped with Versamark and Detail Black embossing powder. Heat set.  The sentiment was die cut with the Simply classic Die. Adhere sentiment to the upper right corner of the card. And for the final touch, adhere a small wooden heart to the corner.

Other Products: white card stock, black card stock, paper trimmer, VersaFine Black Ink, MISTI, pop dots, scissors, VersaColor Pine Cone Ink, Memento Dye Ink Pad - Flannel Grey

For more tips on creating with the Young at Heart collection, watch the tutorial at https://youtu.be/kmqAVM6ibfM.

Instructions: Card Base - Begin with a piece of white card stock measuring 8.5" x 8.5". Score all the way down center, turn and score down center once again which will give you a card base with four equal sized squares. 

Next, using a pair of scissors, cut up the score line of one square stopping when you get to the center of the card base where all score lines meet. Score a diagonal line into box on top of box that you just cut into running from where cut stops to top corner. Slip cut square over other bottom panel of card base and adhere together. Your scored diagonal panel should be on top of the finished base.

For a visual tutorial, please look to YouTube or google Corner Pop Up Card Tutorial.

Decorating - Trim black mats for all sides of card measuring 4" x 4". Trim out desired decorative papers for all panels measuring just slightly smaller than black mats. Ink all edges with a soft brown colored ink. Adhere designer paper and mats together. For main front panel of card, locate premade card panel displaying classic car and palm tree with racing strips and lace accents along the side. Fussy cut image using scissors as shown on card front, ink all edges with a brown colored ink and stamp sentiment onto image panel using a black ink. 

Locate sentiment strips and trim one sentiment from the Forever Young strip and a strip from the Road Trip sentiments to fit the bottom of card as shown, as well as the Journey image from another premade card panel found in the paper collection. Ink all edges with a brown colored ink. Adhere background sentiment strips to card as shown. 

Using pop dots, adhere fussy cut card panel to card front and then adhere Journey sentiment over top, along the side. Adhere to card base. Moving along to panels on the inside...trim out Forever Young sentiment with stars and stripes and Adventure classic car image, ink all edges with a light brown ink and add to panel as shown. Adhere panel to left side of card base. 

For the panel that will face you, trim out classic car image from scrapbook page within the paper collection. Stamp sentiment onto panel using a black colored ink. Stamp and die cut the grass and fence image from the Wildwood Cottage Accents Cling Stamp Set onto white card stock using black ink. Die cut, color, trim fence, shaped slightly and adhere to card panel. To adhere panel to card base, apply Dries Clear Adhesive to top corner of the diagonal score line only - bottom portion of panel will remain free so card is able to fold together and close. 

For bottom panel, adhere a fairly plain piece of coordinating decorative paper matted with black paper to allow for a written message. Add glitter to palm tree, and all flowers in the trunk of classic car on all panels using a dries clear adhesive with fine tip.

Other products:  Cut file, Black Card Stock, White Card Stock, Versamark, Turquoise Embossing Powder, Brilliance Platinum Planet Ink, Sterling Silver Embossing Powder and die cutting machine.

Instructions:  Start by cutting the parts for the plane according to the directions found here out of a combination of Black card stock and designer paper from the Young At Heart Paper Collection. 

I wanted the plane to look like one of the Vintage planes you would see at an airshow and they are usually sponsored so I stamped the sentiments on white card stock using Versamark and heat embossed with Turquoise Embossing Powder before die cutting with the matching die for the sentiments on the body of the plane and the Cut Mat Create 2B Die for the ones on the wings. 

The Sun Kissed Fleur flowers were stamped on white card stock with Platinum Planet ink before being die cut with the matching die. They were distressed with Teal Zeal and shaped with the Flower Shaping tool before finishing off the centers with Mini Prills. 

To finish the propeller blades off properly the propeller images were stamped on white card stock with Versamark and heat embossed with Sterling Silver embossing powder before die cut with the matching die and attaching as shown.

Other Products:  Grayboard, Cardstock:  Blue, Brown, Cream, Red, Black, Blue ribbon(5 yards), Distress Ink Vintage Photo, Silver paper, Scor-Tape

For more tips on creating with this collection watch the tutorial at https://youtu.be/kmqAVM6ibfM.

Instructions:  For more images of this project see here. Cut 12 pieces of 4 x 4" out of gray board. Cover all 12 pieces on one side with pattern paper, photo, and any image you want. Distress all the edges.

Now take six pieces and put the blank side up, mark the 6 pieces 1/2 inch in, on both sides and 1 directly in the middle (I will put up some drawings on my blog). IMPORTANT the photos on the bottom parts are facing to the right and the photos on the top part are facing the other direction, otherwise they are upside down when you open the book!!!

Now place one piece in front of you with the lines up apply Scor-Tape on the guidelines, lay the left edge of the ribbon along the tape at the top and bottom line so that the ribbon trails to the right, place the middle ribbon the opposite direction, allowing the ribbon to trail off the left.

Now select an " Unmarked" piece of decorated Gray board and apply tape or glue to the whole back surface of the undecorated side, place this on top of the Glued ribbons and the Gray board.

Flip the top and bottom ribbons over the decorated side of the gray board that was just glued down, the top and bottom ribbons should now trail off the left, and the middle will go to the right, do NOT adhere the ribbons!

Select another marked piece and place that with the marked side up directly on top of the first set, Repeat these steps till you have one piece left.

Before adhering the final piece of gray board trim the ribbons so that the ends are hidden when the project is complete.

Now Grab the top part and bend it then all the pages are falling down, then bend it again and they will fall again you can go on for hours.....

For the box you have to cut a piece of Black Cardstock at 10 1/2 x 10 1/2 " and score it all the way round at 3" then cut in the score lines on 2 sides and glue the box together.

Now cut a piece of black cardstock for the lid at 7 5/8 x 7 5/8" and score this all the way round at 1 1/2 " and cut on the score lines on 2 sides and glue the lid together, now die cut 4 ornate borders and glue these on the sides of the lid, now you can put decorative paper on the box and some images from the collection.

Other Products: White cardstock, Stickles, ribbon, 3M foam tape, Copic Markers: G82, YG61, YG63, BG000, BG11, BG32, BG34, C01, C03, C05, B01, B02 Y32, Y15, YR65, YR15, YR02, E95, E97, W01, W03, W05, E42, E43, E44

For more tips on creating with this collection watch the tutorial at https://youtu.be/kmqAVM6ibfM.

Instructions: Card size is 6 1/4" X 6".  Fold the insert (6 1/4" X 13") and make a 3/4" score at the top of the large back panel then add a  5 1/2" X 6 1/4" piece of white card stock to the score to make a back for the card so that it stands up-right. Cut paper from the Young At Heart designer paper to fit each layer and glue in place then glue the front, shorter fold up to make a pocket in front for a large tag.

Cut two borders out of the designer paper from the Delicate Borders die, one from the Border Essentials and one from the Ornate Borders and Pockets die (for the tag).  Glue the borders on and cover edges of the two Delicate Borders with some pretty ribbon, tie a bow and glue it to the top left back panel. 

Stamp, die cut and color the Window Box Fillers, the car, plane, happy birthday banner, greenery, and palm trees. I stamped these all on white cardstock using black ink. I used Copic markers for everything except the flowers and greenery, I sponged them with Cantaloupe, with Summer Sky and New Sprout Memento Inks. I stamped and die cut an extra propeller for the airplane and popped it up. My flowers were formed and filled, blue with Prills and Cantaloupe with Stickles for centers.  I used some "tiger eye" baubles as fillers with my flowers. The car and plane and popped up with foam tape. 

For my tag, I stamped the sentiment with teal onto designer paper and cut it with the Large Oval Die and the mat with the Small Ovals. I cut a rectangle 4" X 3 1/8" for my tag and made a coordinating second layer for it and then glued the Ornate Border to the top, glued the ovals on at an angle and then glued my flower spray at the top.

Other Products:  Dimensional Adhesive, Scissors, Paper Trimmer, Die Cutting Machine, Archival Inks- Black, Plum, Sunflower, Leaf Green, Carved Pumpkin Distress Ink, Zig Markers

For instructions on how to assemble the Layered card watch this video. 

For more tips on creating with this collection watch the tutorial at https://youtu.be/kmqAVM6ibfM.

Instructions:  For images of the inside pages see here. The final layered card measures 6" x 6". Cut designer paper for each side of the page, die cutting the center using the circle die. For each pages I have layered 2 circle borders with coordinating paper. Once all paper are adhered to the base pages, start decorating each page.

Stamp, die cut and color some sunflower accents, filler leaves, dogwood flowers, petunia flowers. I stamped everything in Archival Black ink except the dogwood flowers(Plum & Sunflower Archival), the Leaf from the Simply Classic set (Leaf-Archival ink) and the leaves from the Sunflower Accents set (Plum Archival on patterned paper and edged with Carved Pumpkin Archival ink). Die cut decorative borders, and fussy cut the tags and cards from the tag sheet. Shape the flowers using the deluxe flower shaping kit. Each page is designed and embellished in different style keeping the collection theme in place.

For the last page a small envelope is created to hold all the tags and journaling. Each page is given a base border using the border dies. For the front of the album, 2 circle die cuts are adheres on a foam adhesive and placed on one corner with leaves, tiny flowers tucked in. On the other corner a bunch is created using the sunflower accents and filler flowers.

Arrange as desired, I added Crystal Clear to the flowers with prills in the center.

Other Products: Archival Ink- Jet Black, Chameleon Pens (BL6 Royal Blue, BL3 Sky Blue, CG8 Cool Gray, PK4 Peony Pink, YL2 Summer Sun, OR4 Seville Orange), Spectrum Noir Sparkle, Cardstock (White, Black), Buttons, Mini Bottle Cap, Scrapbook Adhesives by 3L (Black Creative Photo Corners, 3D Foam Squares, Crafty Foam Tape, E-Z Runner Grand, Adhesive Dots- Micro

For more tips on creating with this collection watch the tutorial at https://youtu.be/kmqAVM6ibfM.

Instructions: Start with the background patterned paper. Cut this pattern into 3 pieces, the black and white border, the red and white with the blue border and the light blue square with black border. I used a 12 x 12" piece of black cardstock as a base. Adhere the largest border to the cardstock. Adhere the next section to the background using 3D foam squares.

Cut a strip of the red patterned paper that is 4" wide, mat it in black cardstock and adhere to the middle of the layout using 3D foam squares. Then adhere the middle blue patterned square to the middle of the layout using another layer of 3D foam.

3. Find and cut out the mini check borders with pink. Add a 4" piece of it to the bottom of the red patterned border. Using the "Let the Good Times Roll" and black ink, stamp just above that check/pink border.

Mat your photo in red patterned paper, black and white cardstock. Add black photo corners to the photo and adhere to the middle of the layout using 3D foam.

Find and cut out the star border journal block, and the "Forever Young" image. Adhere these just above the matted photo. Cut a piece of the teal patterned paper that s 4x3" and using the plain border die, cut one edge. Cut a piece of black cardstock that is 4x3" and cut the edge using the scallop border die. Adhere these pieces together and trim any pattern overhang. Adhere this to the top of the red border, and I added the mini bottle cap embellishment.

Cut 2 pieces of black cardstock that are 1.5 x 2.5" and flag one end of each. Adhere one in the top left hand corner and 1 in the bottom right hand corner. Add a piece of the mini check/pink border to the top left flag.

Stamp and die cut 1 of the convertible car image using Black Archival Ink. I added colour to the image using Chameleon Pens. The car itself was coloured using BL3, and I used the fuse to create highlights on the vehicle to look like shine. I used CG8 for the chrome of the car. I used all of the other colours (YG3, BL6, PK4, YL2, OR4) to add colour to the flowers in the back.

Using the Spectrum Noir Sparkle Pen I added shine to the entire car. Adhere the car in the bottom right hand corner of the layout using 3D foam. Add the buttons for extra embellishing.

For instructions on how to assemble the Layered card watch this video. 

For more tips on creating with this collection watch the tutorial at https://youtu.be/kmqAVM6ibfM.

Instructions: Take your layered circles card set and choose paper for each of the pages with paper from the Young At Heart patterned paper collection and diecut with coordinating circles. Also die cut circle frames using two circle dies for each page using designer paper. Locate the page that has the cars preprinted and die cut those using the matching dies.

Stamp 6 of the Rose vines on White card stock with Pistachio ink and color with Toffee Crunch and Pistachio. Stamp 3 sets of the Botanic Rose with black ink on white cardstock and color with the Cantaloupe, Pearlescent Orchid and Summer Sky. Stamp one set of the Daisies on white with Black and color with Cantaloupe.  Stamp the Dogwood on white with Frost White and emboss with the Aged Ivory, color lightly with the Pearlescent Orchid. Stamp the Dogwood leaves on white with Pistachio ink and color in.

Die cut all the flowers and leaves, shape and adhere to the card panels. Stamp the Birds on white cardstock with black, color with Toffee Crunch and Orchid.

To finish add Crystal Clear and Powder to birds, flowers and leaves.

Other Products:  Diamond Stickles, Bone folder, Paper distressing tool, Scissors, Ruler, Black Archival Ink, Spectrum Noir Blending colour pencils: Dove Grey C670, Sea Green C380, Deep Red C130, Yellow Green C450, Lemon Yellow C030, Deep Cadmium C040, Loganberry C160, Bright Orange c080, Mid Green C400,Blush Pink C180,Pale Orange C060, Windsor & Newton Oil colour low oder solvent, Blending stumps, Double Sided 3d Foam squares, Misti

For more tips on creating with the Young at Heart collection, watch the tutorial at https://youtu.be/kmqAVM6ibfM.

Instructions: The finished size of this tent fold card is 5 1/4 ” x 5 1/4 ” (13.5 cm x 13.5 cm).

Taking the white card stock make the tent fold card base. Find the blue coloured and checkered print design paper needed from the Young at Heart paper collection. Cut the blue (1.2 cm) smaller all around for the second matting layer. Distress the edges. 

Taking the white card stock, black archival ink, Young at Heart and Simply Classic stamps and matching dies stamp, colour and die cut the car, leaves and journey sentiment. The leaf branches are stamped and cut x 4. Apply green colour to only one of the leaf branches. This will be placed behind the tail end of the car later. 

Still using the white card stock, take the border die and cut x 3 borders. Trim the borders to fit behind the matting and two for the front card. 

The placement of the layers for the card: First being the blue paper matting adhering with the foam squares, the trimmed white borders adhered between the blue matting and the checkered matting also with foam squares. The two front boarder layers adhered with Dries Clear Adhesive then the car adhered with the foam squares. The sentiment adhered also with the foam squares to the top left of the card. 

The leaf branches are tucked behind the tail end of the car, between the border layers and behind the sentiment. To finish the card, apply the diamond stickles to the car, flowers, leaves, sentiment and the lace borders.

Other Products: Westcott Brand Trimmer/Scissors, Copic Sketch: Y04, Y09, YG05, YG09, Y18, Scrapiniec Frame, stamens (yellow, orange), piercing tool

For more tips on creating with the Young at Heart collection, watch the tutorial at https://youtu.be/kmqAVM6ibfM.

Instructions: Take your patterned paper in various sheets from the paper pad and adhere to the Flipfold inserts using Dries Clear Adhesive.

For the front, cut one of the 4 x 4 sheets from the 12 x 12 patterned paper. Place glue only along the edge to form a pocket. For the top pocket I used the regal borders and pocket die in white and black cardstock.  This will serve as the decorative piece for the front pocket. Adhere as shown with dries clear adhesive.

Now adhere the Scrapiniec frame embellishment to the front of the card.  Then color the leaves using copic markers. Diecut the plane from the paper collections using the Young At Heart Die and adhere to the frame. 

Stamp the flowers with Tuxedo Black ink using the Wildwood Florals Cling stamp set and die cut using the coordinating die. You will need a total of 14 flowers. Color the centers using Copic sketch markers for added color and depth. Shape the flowers using the Deluxe Flower Shaping Kit. To form the flowers use two layers then using your piercing tool pierce the centers to add your stamen.  Finally fussy cut some leaves from the Sugar Hollow paper collection to add to your flower arrangement. Add Rajni Chawla’s Frosting to the flowers using Dries Clear Adhesive.

Other Products:  Cardstock-black, white, distress ink-peeled paint, archival ink-orange blossom, garden patina, rose madder, diamond dust.

For more tips on creating with the Young at Heart collection, watch the tutorial at https://youtu.be/kmqAVM6ibfM.

Instructions:  Card-size is 8.75” x 17.5” - after scoring the finished card size is 8.75” x 8.75”. Base of the card is black. Cut a piece of white cardstock and the size is 8.5” x8.5”. Cut the next layer in black - size is 6.375 ”x 6.375”. Cut the next layer in white - size is 6.25” x 6.25”. Adhere the card layers to the base using dries clear adhesive. Cut the 6” x 6” card panel from the paper pad, cut out the centre and adhere the panel to the base, add Foam tape to the cut out centre to give dimension and adhere.

Now cut two of the decorative die from Festive Holiday die in white cardstock and adhere to the centre of the raised panel. Cut one wheel with car embellishment from the pattern paper and use crystal clear at the wheel on the edges

Now stamp the flowers from the Classic Sunflower cling stamp set with Orange Blossom ink, die cut them with the coordinating die and colour them with Buttercup at the centre of the flower and orange blossom at the edges and shape them with deluxe flower shaping tool kit. Use the small flowers from the stamp set for this card.

Stamp and colour the botanical rose with Rose Madder, cut with the coordinating die.  Add more colour around the edges, shape with the Deluxe Flower Shaping Kit, add dries clear adhesive and sprinkle with Diamond Dust. Stamp some leaves from the Simply Classic Cling Stamp Set with Plum archival ink, color with Distress ink in Peeled Paint and cut out with the coordinating die. 

Cut two of the Window Box Elements Die from red cardstock, cut them in half and adhere to the card as shown. Cut sentiment, tags and bicycle from the pattern paper with coordinating dies and adhere. 

Using Dries Clear Adhesive, adhere all of the flowers and leaves to the car and the bicycle.  

Other Products: Paper trimmer, scoring board, chipboard, foam dimensionals 

For more tips on creating with this collection watch the tutorial at https://youtu.be/kmqAVM6ibfM.

Instructions: To view more images of this project see here. Easel Base: Cut four chip board pieces two 5 inches x 6 3/4 inches and two 2 1/2 inches x 5 inches. Cut and score white cardstock  one piece 5 inches by 12 inches and score on 12 inch side at 6 3/4 inches and 9 1/4 inches. Cut and score white cardstock 5 inches by 5 inches and score at 2 1/2 inches. Cut three pieces of white cardstock at 5 inches by 6 3/4 inches. These pieces of chipboard and white cardstock form the 3D frame for the pop up flip fold base. The frame of the pop up base is made and stands up like a flip up easel card. Take the 5 inches by 12 inches white cardstock piece and glue one of the 5 inches x 6 3/4 inches chipboard to the top of the 5 inches by 6 3/4 inches section. Place one of the 2 1/2 by 5 inches chipboard pieces just to the right of the 6 3/4 inches score line and the second chipboard piece to the right of the 9 1/4 inches score line on the white cardstock. Place corresponding size white cardstock pieces on the other side of the chipboard. Take the second 5 inches by 6 3/4 inches chipboard and place white cardstock on both sides of it. Taking the 5 x 12 inches piece of chipboard covered with white cardstock and the 5 inches by 6 3/4 inches chipboard covered with white cardstock glue the pieces together to form the easel base. See picture for location of chipboard pieces.

Square shadow box flip fold page: Using the Cut Create Mat dies cut frame piece from the designer paper and cut a corresponding size picture for the shadow box frame. Glue the frame front and picture in place. Cut four pieces of designer paper 1/2 inch by 5 inches. Glue these pieces to the outside four edges of the frame. Cut one piece of white cardstock at 3 inches by 5 inches and score at 1/2 inch on 3 inch side. Fold on score line and glue this piece of white cardstock to the back of the shadow frame and the top of the white cardstock on the 5 inches by 6 3/4 inches flip frame made in previous step. This will allow the shadow box to flip up as the first page of the flip fold easel card. Cut a piece of white cardstock 5 inches by 6 inches. Score at 1/2 inch and 5 1/2 inches on 6 inch side of cardstock. Fold on score lines and glue to the back of the shadow box frame to form a pocket. Cut a piece of 4 1/2 inches and 4 1/2 inches white cardstock. Cut two 4 inches by 4 inches pictures and glue to either side of the cardstock. Make a circle tab to glue to top of the white cardstock to allow this piece to easily moved in and out of the pocket! Cut a piece of 5 inches by 5 inches designer paper to cover the back of the shadow box frame and pocket. Cut out a picture 4 1/2 inches by 4 1/2 inches to place on top of the designer paper on the back of the shadow box frame.

Cover the base of the flip fold album with designer papers measuring four 5 inches by 6 3/4 inches and three 2 1/2 inches by 5 inches. For the top bottom section of the flip fold album cut out adventure of a lifetime border and glue in place as illustrated in picture and cut out a 4 inches by 4 inches picture and glue in place. Second and third pages of flip fold album contains four 4 inches by 4 inches pictures on a piece of white cardstock measuring 4 1/2 inches by 9 inches that is scored at 4 1/2 inches on the 9 inch side. Cut a piece of white cardstock 1 inch by 4 1/2 inches to form the flip fold. Score at 1/2 inch to form flip fold.Glue piece to the back section of the second page and to the top of flip fold easel to form these pages of the flip fold waterfall album. See picture for placement of these pages.  

Hold easel album up: Die cut airplane from the designer paper and die cut one airplane from white cardstock. Place foam dimensionals between designer airplane and white cardstock airplane to pop up airplane. Stamp journey and die cut journey sentiment out. Die cut journey sentiment shape from white cardstock and place foam dimensionals between stamped journey sentiment and cardstock to pop up journey banner.

Other Products: Walnut Stain and Old Paper Distress Inks,  White Card, 3d Foam pads 

For more tips on creating with the Young at Heart collection, watch the tutorial at https://youtu.be/kmqAVM6ibfM.

Instructions: Finished card is 8” x 8”. Cut 2 pieces of card 8” x 8” and 6” x 6”. Randomly stamp your sentiments from Simply Classic Stamp Set and Young At Heart Stamp Set with Rich Cocoa then use Walnut Stain and Old paper to distress your papers.

Cut a piece of white card stock to 4” x 4” and stamp the chosen Sentiment from Good Times Sentiments Stamp Set in Memento Rich Cocoa and distress. Layer these 3 pieces of card onto your card base with 3d Foam pads. 

Cut a strip of card 1 x 8 inches for the stamp journey on this from Simply Classic Stamp Set stamp and cut an extra one with the Simply Classic Die, add this to the paper strip with 3d foam pads add this to the left hand side of your card.

Stamp the Truck from Simply Classic Stamp Set and die cut using coordinating die, cut off the Flowers from the back and colour with your Walnut Stain Distress inks and adhere to card with 3d Foam pads.