Instructions:

Card size is 5 1/2 x 5 1/4”. Cut white cardstock to 5 1/2 x 10 1/2”. Score and fold at 5 1/4”. Cut two pieces from the Feathery Florals Paper collection to 5 1/2 x 5 1/4”. Using the large outline from the Slim Ornate Rectangle die HCD3-7448 to diecut a border along the top and bottom of the panels. Since we are wanting to have our paper wider than the Slim Ornate Rectangle actual die size you’ll need to make a few modifications to maximize the versatility of this die.

Tape the border of the Slim Ornate Rectangle die along top of your first panel from the Feathery Florals Paper collection and diecut only the top border. To do this, remove the thinnest plate from your diecutting machine, now since it’s so thin it shouldn’t make an actual cut when you pass it through the machine. This will allow you to place several cardstock shims on top of the die, only on the section you wish to diecut. Now when you pass it through your machine it will make that cut along the top of your panel, but not along the bottom. Repeat this step to diecut the bottom border. Repeat this for the purple background.

Cut an oval opening in both panels and in the card base using the largest plain edge oval in the HCD1-7157 Eyelet Oval and Basics Large die set. Ink the edges with Majestic Violet ink and adhere together, then adhere this onto card base using foam adhesive. Diecut several layers of Large Ornate Rectangle from same die set, layer together to create a thicker frame. Cut apart the so you have two separate borders.  Apply Dries Clear glue onto sponge, dab randomly frame and sprinkle with Rajni Chawla’s Crystal Clear. Glue onto card base, then use scissors to trim off excess.

Cut green panel from paper collection to 5 1/4 x 5 1/4”, ink edges with Leaf Green ink. Stamp butterfly using both Magenta Hue and Majestic Violet ink onto green panel. Use the coordinating die to diecut some painters tape into a butterfly shape, and carefully place over image on green panel. This will work as a mask. Take an image from Petite Feather Florals stamp set and stamp onto green card panel using Leaf Green ink. Remove butterfly mask to see your beautiful images. Adhere panel on inside of card base. 

Use white cardstock to stamp the images. Stamp the Petite Feathery Florals using Olive and Leaf Green on the foliage and Rose Madder and Magenta Hue on the flowers. Stamp the small feather using Majestic Violet and Forget Me Not Ink, stamp the large feather using gold ink, emboss with gold embossing powder, heat set.

Diecut images with coordinating dies. Diecut an additional large feather out of Luxe Gold cardstock for layering. Color images with Stack and Store daubers. Color the Petite Feathery Florals with Vivid Chartreuse and Leaf Green on the foliage, and Rose Madder on the flowers. Apply Crystal Lacquer onto colored image using a Hydra Sponge, allow to dry. Then use scissors to snip apart for dimension. Color gold embossed feather with Sunflower and Magenta Hue inks, adhere coordinating Luxe Gold feather at a slight offset for a shadow effect. Adhere as shown, using Dries Clear glue and foam adhesive. Lightly shape images with Deluxe Flower Shaping Kit.

Apply ink to sentiment “thoughtful” using Magenta Hue and Majestic Violet ink on white cardstock, then stamp entire sentiment "You are so thouhgtful" using same inks on another piece of white cardstock. This allows you to control how wide your borders will be for the word “thoughtful”. Use paper trimmer to cut apart, matting some words with Luxe Gold cardstock if desired. Adhere with foam adhesive. Apply Dries Clear glue onto card as desired, sprinkle with Baby’s Breath glitter and allow to dry.

Other Products: White Cardstock, Foam adhesive, paper trimmer, scissors, Tidy Tray, Painters Tape

Instructions:

Die cut a piece of white cardstock using the dies from Delicate Daisy Corner & Border Die. Adhere the die cut on a 4 1/4" x 5 1/2" top folding white cardbase.

Stamp the image from Petite Feathery Florals Cling Stamp set on a piece of deluxe flower shaping paper using jet black archival ink. Die cut it using matching die from Petite Feathery Florals die. Colour the image using Altenew watercolours.

Adhere the Petite Feathery Florals image on the card front as shown using foam dots. Cover the flower centers with white blizzard nuvo drops and ass few Ivory Seashell Nuvo Drops to the die cut to add finishing touch.

Other Products: Altenew watercolours, brustro green gold brushes and white blizzard nuvo drops

Instructions:

My finished card is 4 x 9. Make card base and cover with a piece of 12B of the paper collection. Using the Slim Elegant Rectangle die, cut out one in white and one in gold. Then cut out one of the other dies in the set to go in the center to serve as a medallion. I used a piece of sheet 2B for this.  I also cut one of these out of white cardstock and glued them together to give it a bit more strength. I adhered with dimensional tape to the center of the card front.  

Stamp the flower and the feathery piece using Toffee Crunch ink and color with pencils and odorless mineral spirits. Cut out using coordinating dies. I cut apart the flower piece and then glued it to the feather. Add glitter to both and then I added gold Gala Glitz and allow to dry.

The card is finished.  

Other Products: Die Cut Machine, White Cardstock, Dimensional Tape, Prisma Color Pencils: 911-Olive, 912-Green Apple, 1000-Violet, 1007-Violet Imperial, Yellow, Blending Stumps and Odorless Mineral Spirits

Instructions:

Create a 5 x 7 inch card base in white cardstock. Cut a 4.5 x 6.5 inch piece of light blue paper from the Feathery Florals Paper Collection and adhere to card front. Cut the frame from the Oval Filigree Frame Die in white card stock and adhere to card front. Cut out the center die in lavender designer paper and adhere with foam tape. Cut out the next two smaller dies in white cardstock and adhere. Stamp the sentiment from the Friendship Sentiments Cling Stamp Set in Jet Black and cut out with small inner circle, distress with Vibrant Violet and adhere with foam tape.

Stamp the flower sprigs from the Petite Feathery Floral Feathers Cling Stamp Sets in Jet Black, sponge with Vibrant Violet and Vivid Chartreuse, cut out with coordinating dies and add glitter.

Stamp the Garden Lily Cling Stamp Set in Vibrant Violet, sponge with Vibrant Violet and Rose Madder, cut out with coordinating dies and sculpt with the Garden Lily Shaping Mold, add stamens and glitter. Stamp the leaves from the same set in Olive, sponge with Vivid Chartreuse, cut out with coordinating dies, sculpt with the Garden Lily Shaping Mold and add glitter.

Adhere sprigs, leaves and flowers as shown.  

Other Products: White cardstock

Instructions:

Cut a 4” x 6” pale paper from the collection and use the filigree border and accents die top and bottom of the strip. Edge with elderberry ink.

Die cut the 3rd size slim basic rectangle using vellum and stamp the small feather randomly onto the shape using sweet plum ink, edge with elderberry ink.

Die cut a paper from the collection using  the outer slim gateway rectangle die, wrap the paper layer and the vellum layer around the gateway rectangle at an angle and secure with dries clear adhesive.

Die cut the slim gateway rectangle using white card and adhere the paper die cut to the front.

Fold an 8” x 9” piece of white card at 4”. Place the slim gateway rectangle over the folded edge and run through the die cutting machine to create the shaped card. Adhere the rectangle panel to the front of the card base.

Stamp the Friendship sentiment onto paper from the collection using elderberry ink and edge with the same colour using a dauber. Die cut using a circle from the eyelet circle and basics small die set and adhere to a co ordinating circle from the circle basics large die set. Adhere the sentiment to a white diecut of the largest eyelet circle from the decorative circle frames die set and adhere to the card front as shown using foam pads.

Stamp the large feather onto paper from the collection using elderberry ink, lightly colour with copics B00, G02, Y04 and elderberry ink, adhere to a white diecut of the feather and add to the card using foam pads and dries clear adhesive.

Lightly sponge dries clear adhesive to the feather and the flowers at the top of the card and lightly dust with transparent glitter. Remove excess and allow to dry.

Other Products: White card, foam pads, Copics B00, G02 & Y0.4

Instructions:

Cut a piece of white card stock to 7 1/2” x 11” and score in half at 5 1/2”.  Cut a piece from sheet 8B of the HCDP1-2149 Feathery Florals Paper Collection measuring 5 1/2” x 7 1/2” and adhere to the card front. Cut a piece of Luxe Silver Card Stock to 5 1/8” x 7 1/8” and a piece from sheet 6B measuring 5” x 7” and glue these two layers onto the card front. From sheet 4A cut a floral strip that measures 5” x 2”. Then with HCD2-7425 Filigree Border & Accents Die Set use the thin straight scalloped border and cut four pieces, 2x from white card stock and 2x from Luxe Silver Card Stock. Layer these together as shown and then trim them to match the 5” length of the floral strip cut in the previous step. Glue these at the top and the bottom and adhere to the card base approx. 7/8” from the bottom of the card.

Stamp the large vase from the HCPC-3982 Classic Floral Vase Cling Stamp Set with Majestic Violet Archival ink onto Sheet 12B from the Feathery Floral Paper Collection. Die cut with the coordinating die. Using HCDA2-450 Stack and Store Daubers ink the edges with Wilted Violet Ranger Oxide Ink. Now using the decorative die from the same set, cut one from white card stock and one from Luxe Silver Card Stock and layer these together slightly off set so that the silver peeks out from behind the white. Glue these to the front of the vase using Dries Clear Adhesive with the Metal Tip Applicator. Then attach the vase to the card with some 3D glue dots.

Stamp the large flower 3x and the medium flower 1x from the HCPC-3954 Clematis Cling Stamp Set onto HCPP1-475 Deluxe Flower Shaping Paper using Majestic Violet Ink. Color images lightly with Majestic Violet, then after die cutting with the coordinating die, ink the edges with Wilted Violet Oxide Ink. Shape flowers using the Grooved Golf Tools. To finish flowers, add Rajni Chawla’s Crystal Clear Glitter to the petals using a Hydra Sponge with Dries Clear Adhesive. Then add Heart of Gold Prills to the center of each flower. Next stamp the larger flower 3x and the smaller flower stamp 3x from the HCPC-3887 Wild Aster Cling Stamp Set using Periwinkle Archival ink. Color images lightly with Periwinkle ink then after die cut with the coordinating die, darken flower tips with Periwinkle Ink. Finish the flowers as above by adding glitter then add both Lemon Chiffon and Ribbit Prills to the center of each flower.

Stamp the large floral 1x from the HCPC-31017 Feathery Florals Cling Stamp Set onto Deluxe Flower shaping paper with Olive Archival Ink and color just the leafy areas with Leaf Green and Olive inks. (Just the swirls will be added to the card) Stamp the HCPC-3835 Leafy Accents Cling Stamp Set 1x using the same green stamp combination as above. Die cut with coordinating dies. Ink the edges of the Leafy Accents leaf with Olive using the Stack and Store Daubers before shaping them in the coordinating 3D Shaping Mold. Now stamp the HCPC-31019 Floral Feathers Cling Stamp Set with Versamark ink onto Vellum paper making sure to treat the paper first with an anti static tool before stamping. Heat emboss using silver embossing powder. Die cut with the coordinating die. Lastly, stamp the small butterfly from the HCPC-31018 Petite Feathery Florals Cling Stamp Set onto vellum same as above only using white embossing powder, then cut out using the coordinating dies.

For the sentiment simply cut a sentiment strip from the paper pad and cut a piece of Luxe Silver Card Stock to nicely border it. Add the white butterfly to the front of the sentiment. Attach the completed sentiment to the vase with 3D foam dots. Now simply arrange the feathers, and leaves first to create a nice base for the flowers. Then glue your flowers with a glue gun for a secure hold. TOP TIP: Take a photo with a phone when arranging the flowers to help decide on the placement. It helps to look at the photo when deciding how to balance a large arrangement like this.

To finish the inside of the card, cut a piece from sheet 8B of the HCDP1-2149 Feathery Florals Paper Collection measuring 5 1/2” x 7 1/2” and adhere. Using the third largest Oval Filigree Frame Die, cut from white card stock and from Luxe Silver Card Stock. Adhere together slightly offset and adhere as shown.

Other Products: Silver Embossing Powder, 3D foam Dots, Glue Gun, Glue Sticks, Paper Trimmer, Die Cut Machine

Instructions:

Card size:  5 5/8” x 8 3/4". Make a shaped card (see video) using the outer die of the Slim Gateway making sure the left side fold is just inside the cutting edge so that it will not get cut. Cut 2 pieces of lavender decorative paper using the same die (1 is for the inside of card). Glue these decorative panels to card base front and inside. Cut the decorative die of the Slim Gateway from silver and from purple cardstock, glue together slightly off-set. Pop the purple and silver layer up off card Base.

Stamp sentiment using Majestic Violet onto white, die cut with circle then mat with a larger silver circle, pop up inside of the little gate part that opens.

Stamp Peacock, Floral Feathers and Petite Feathery Florals using black, die cut then color using Copics. Stamp Lilies using Sunflower Yellow, sponge with Buttercup, die cut then shape in the mold. Glue 2 same size blossoms for each flower, insert pollen stamen.

Arrange images and lilies around the top, left and bottom of card (make sure gateway can still open). Glitter flowers, feathers and peacock.

Other Products: Purple cardstock, white cardstock, glue gun, Copic Markers: BG11, BG32, BG34, G02, Y11, Y15, Y38, YG61, YG82

Instructions:

Cut a piece of white card stock 8 1/2 x 9".  Score the 81/2 size at 4 1/4 and fold, this creates a 4 1/4 x 9” card base. Use #1 and 2 dies from the Slim Elegant Rectangle set and cut the largest from the Feathery Florals paper and the next one from white card stock. Adhere to the card base as shown.

Stamp 2 of the Feathery Florals on white card stock with black ink and color with the Prisma Color pencils. Cut out with the coordinating die. Add one to the top and the other one to the bottom of the card. Add the sentiment cut from the paper pack in the center.

To finish, add glitter to the leaves and flowers and prills to the flower centers.

Other Products: Paper trimmer, Die cut machine, Prisma Color pencils,

Instructions:

The ready top-fold slimline card from smooth cardstock measures 9 1/2" by 4 1/2". To prepare the card base, cut the paper measuring 9 1/2" by 9 " and score at 4 1/2" on 9" length and crease well.

For the card front, choose the pattern paper from the Feathery Florals collection, cut measuring 9" by 4", and layer it on the card panel. Next, cut a white die cut using the Slim Eyelet Rectangle Die and layer it on the card front. Choose the coordinating paper from the designer paper collection and cut it using a coordinating die from Slim Basic Rectangle Die set and mat it on the eyelet panel. 

To decorate the card front, cut one piece each from white and Luxe gold cardstock using Slim Ornate Rectangle Die and adhere both together keeping the gold one on top. Layer this die cut on the card front using tiny foam dots. Also, cut the inner frame in white cardstock twice and adhere them together. Add a solid color cardstock on the bottom. Layer the prepared panel as shown. 

Stamp the large feather twice with black archival ink using the Feathery Florals Cling Stamp Set and paint it using Zig Clean Clear Brush Markers. Cut these using their coordinating die set. Adhere extra die cuts to add strength. 

For the flowers, stamp multiple images of mixed florals from Wild Aster Cling Stamp Set on Deluxe flower shaping paper using Plum Archival Ink and cut them using their coordinating dies. Color the flowers using Cactus Flower Archival Ink and shape them using Deluxe Flower Shaping Kit. Prepare 2 large and 3 medium flowers. Also stamp, color, and shape a few Wisteria flowers. Complete all the flowers by adding prills in the centers.

Stamp 3 leafy vines using Olive Green archival ink on Deluxe Flower Shaping Paper, color them using Leaf Green, and cut them using its coordinating die. Next, shape them using the coordinating mold.

Once all the elements are ready, assemble the flower bouquet on the right side of the card and finish the card by adding stamped sentiment using Celebrate Love Sentiments Cling Stamp Set.

Other Products: Smooth White Cardstock, Die Cutting Machine, Score Board, Foam Tape, Glossy Accent

Instructions:

Ready side fold card measures 5.5" × 7.5". Cut a mat from designer paper collection measureing 5.25" × 7.25". Adhere it on ready card base. Cut another mat from designer paper collection measuring 4" × 7.25", distress edges with matching ink and adhere it on white cardstock measuring 4 1/8"×7.25". Cut a frame from white cardstock and a frame from Luxe Gold cardstock using Slim Ornate Rectangle Die. Trim both frames and glue them on the both side of second mat as pictured. Adhere this mat on card using dimensional tape. Cut a decorative oval frame from white cardstock and one from luxe gold using die from Oval Filigree Frame Die set. Glue both pieces together and adhere it on card using dimensional tape. Cut 3 oval pieces, 2 from designer paper and one from white cardstock using oval dies. Stamp sentiment on smaller onal piece using magenta hue and Mulberry ink and adhere them on card.  

Stamp classic rose flowers on deluxe flower shaping paper using pink peony ink. Stamp leaves using fern green ink. Paint flowers using pink peony and Mulberry ink and leaves using leaf green ink and fern green ink. Shape flowers using round object and layer them to create 3D flower. Shapes leaves using shaping mold. Stamp, color and die cut small flowers in green from Sweet Pea Stamp set for the rose buds. Stamp lush lilac flower using sea grass ink and cut with coordinating die. Paint flowers using same ink and shape using stylus. Stamp leaves from Holly Berry Spray stamp and Wild Aster Spray stamp using leaf green ink and cut with coordinating die Paint using same ink. Arrange all the elements on card using hot melted glue. 

For finished look, apply Crystal Clear glitter on flowers and leaves using Art Glitter Dries Clear glue. 

Other Products: Smooth White Cardstock, Sea Grass Archival, Hot melted Glue

Instructions:

Cut a piece of white cardstock to 11 x 8 1/4". Score at 2 3/4" and 5.5" and fold to get a z-fold base. Cut 2 pieces of paper from Feathery Florals Paper Collection to 8 x 2.5" and 8 x 5 1/4", the other 2 to 2 1/4 x 7 10/16" and 5 x 7 10/16". Adhere them to the base as pictured. Cut out 3 silver decors with the Filigree Accents Die. Cut out 2 white and 2 silver decors with the die from the Filigree Border & Accents Die. Adhere them as pictured. Cut out 2 white and 2 silver frames with the Oval Filigree Frame Die. Adhere them together in pairs. One of them adhere at the front of the card. On the second one stamp a sentiment with the Friendship Sentiments Cling Stamp Set and adhere inside of the card. Stamp 2 bigger florals from the Feathery Florals Cling Stamp Set in Tuxedo Black ink, color them and cut out with coordinating die. Adhere all elements to the base. 

Stamp blossoms from the Garden Lily Cling Stamp Set in Cactus Flower ink onto Deluxe Flower Shaping Paper, color their edges with the same ink and their centers with the Sunflower ink, diecut with coordinating dies and shape with mold. Add Petite Pollen Stamens to all lilies. Stamp small flowers from the Small Wild Rose Cling Stamp Set onto Deluxe Flower Shaping Paper in Magenta Hue ink, diecut with coordinating dies, shape with Deluxe Flower Shaping tools and add Ribbit prills. Stamp 4 branches from Leafy Accents Cling Stamp Set in Fern Green ink, color them with Leaf Green ink, cut out with coordinating die and shape with coordinating mold. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers. Add some self-adhesive crystals.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, sisal, colored pencils, self-adhesive crystals

Instructions:

The finished tag measure 4 x 6 inches. Cut one piece of white  Deluxe Shaping shaping paper with the Album tags die. Also cut a smaller one in the Feathery florals Collection paper #10B. Glue them on each other.

Use the stamp in the Floral Feathers die kit and emboss on a vellum paper with versamark ink and with violet, pink and turquoise powder. Die cut with the coordinating die. Glue a real feather on your tag and the 3 die cuts on your tag. Cut a sentiment from paper #6A (4 x 1/2) and ink with deep purple ink. Glue it with 3D foam.

Poke a hole in your tag and add bakers twine in it. Add glue on your tag and spread glamour sparkles to make it shine.

Other Products: Diecutting machine, watermister, scissors, hot glue gun, cheesecloth, sewing thread, feather, glamour sparkles purple and turquoise, versa color ink, embossing powder pink, turquoise, purple, baker twine,

Instructions:

Ready tent fold card measures 4.4" × 9.5". Cut a mat from designer paper measures 4.25" × 9.25", distress edges with matching ink and adhere it on ready card base. Cut a frame from white cardstock and a frame from designer paper using die from the Slim Ornate Rectangle die set. Glue both frames together. Glue it on card using dimensional tape. Cut a piece of designer paper and vellum paper measuring 2.5" × 7.75", glue vellum piece on designer paper piece using score tape. Cut two strips, one from designer paper and one from luxe gold cardstock. Glue both strips together and glue it on vellum base like a belly band. Adhere vellum base on card using dimensional tape. Further, cut a plain heart and a decorative heart from white cardstock using die from the Decorative Heart die set.  Stamp sentiment on plain heart die cut using majestic violet ink. Glue decorative heart on it using dimensional tape. Glue it on card. 

Stamp Floral images and feather image on watercolor paper using black archival ink. Paint images using zig markers and cut with coordinating dies. Arrange them and glue them using foam dots on card as pictured.

Other Products: Smooth White Cardstock, Dimensional Tape, watercolor paper

Instructions:

Make a 6 inch square card base. Cut white card stock 6" x 12" and score at 6 inch mark on the longer side. Fold to make a square top folding card. Cut a mat layer from gold card stock measuring 5 3/4" x 5 3/4 and adhere to the card base. Cut pattern paper from the paper collection a little smaller than the gold layer and adhere on top.Cut another piece of gold card stock measuring 4" x 4". Add a mat layer from the pattern paper and adhere the whole piece on the card front  in a little tilted manner.

Cut two pieces of die cuts in Luxe Gold card stock using the Delicate daisy die using the outer die and cut two pieces of die cuts in white card stock using the same die set using the decorative die for the same piece. Adhere the diecuts in the corners of the smaller square piece. Cut an eyelet circle frame with white card stock using the decorative eyelets frame die and add pattern paper at the back. Adhere the whole piece in the centre.

Stamp two floral images from the Feathery Florals stamp set with black ink on flower shaping paper. Colour the image using the zig markers with watercolor brush. Cut with the coordinating die. Adhere the two pieces together using form dots and add on the eyelets circle frame.

Stamp the butterfly from the petite feathery floral stamp set and colour with Zig markers. Attach the butterflies together and add on the card front.

Finish the card by adding a sentiment cut from the pattern paper

Other Products: Die cutting machine, scoring board

Instructions:

Take a 5" x 7" card blank and cover with pink paper from the Feathery Florals Paper Collection. Take the two seven inch dies from the Filigree Accents Die Set, tape them together with low tack tape onto white card. Die cut twice. Adhere each piece top and bottom of the tent fold card. Cut a piece of green paper to 7" x 1 1/2", adhere across center of card.  

Stamp onto Deluxe Flower Shaping Paper with Ranger Archival Olive ink, two sets of Petite Feathery Florals. Color with Olive ink using a Dauber. Color the flowers and butterfly with a Zig Clean Color Real Brush Pen ink in 025 Pink. Die cut with the matching dies. Stamp onto Deluxe Flower Shaping Paper in Olive ink one set of Floral Feathers. Color in with olive ink using a Dauber. Die cut with the matching dies.

Stamp onto Vellum paper with Versacolor white pigment ink, two sets of large Feathery Florals from the Feathery Florals Cling Stamp Set. Add white embossing powder and dry with a heat tool. Die cut with the matching die. Repeat with the Floral Feathers.

Stamp onto Vellum paper with Versacolor white pigment ink, two sets of the Garden Lilies from the Garden Lily Cling Stamp Set. Add white embossing powder and dry with a heat tool. Die cut with the matching dies. Adhere two medium Lilies and one large Lily together with Dries Clear Adhesive. Pierce a hole in the middle, using the tool from the Deluxe Flower Shaping Kit and add four white Petite Pollen Stamens and one green Beaded Stamen. Offset the petals and add Dries Clear Adhesive as you go.

Adhere the large Vellum Feathery Floral to the center of the card. Adhere two Petite Feathery Florals in card, across the middle, overlapping in the center. Adhere the Lily using hot glue. Adhere the Olive Floral Feathers and all the Vellum Floral Feathers around the card. Cut apart the spare large Feathery Floral, add the leaves to the card.

Stamp in Olive ink a sentiment from the Thank You Sentiment Cling Stamp Set. Die cut with the small oval from the Slim Lattice Oval Die. Adhere to card with foam tape. Sponge Dries Clear Adhesive all over the card, add clear glitter. All done.

Other Products: 5" x 7" card blank, die cutting machine, low tack tape, white card, heat tool, hot glue, foam tape, clear glitter.

Instructions:

Create base using outside Fancy Classic Rectangle Frame. Die cut two pieces from white cardstock, glue it together on the top, using frame die cut from paper collection paper, stamp sentiment using Elegant Rose Sentiments Cling Stamp Set with Ranger Archival Ink Pad - Jet Black and place onto card using Foam Strips for dimension. Cut frame from Luxe Silver paper and place onto the card using adhesive foam strips. Cut out the smaller frame from paper collection and silver paper. Place on the top of card using adhesive foam strips.

To create Clematis flowers, stamp Clematis Cling Stamp on white paper with Ranger Archival Ink Pad - Vibrant Fuchsia and cut using the coordinating dies. You will need 2 petals of each to create flowers, for bigger flower use the biggest stamp, for smaller flower use smaller size stamp. Colour the flower with Ranger Archival Ink Pad - Vibrant Fuchsia using a sponge dauber. After colouring, place the flowers into the mold and run through cutting/embossing machine. Pierce the center and glue in some stamens using hot glue gun. Add a little hot glue to the underside of the flower. Add little glue around stamens and sprinkle prills, leave it to dry.  Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

To create leaves stamp the Hollyhock Stem & Blooms Cling Stamp Set on the white paper with Ranger Archival Ink Pad - Leaf Green, cut out with the coordinating die, shade using this same ink and shape. Sponge the leaves with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

 Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine,

Instructions:

Cut a piece of White cardstock measuring 8 x 12 inches, score and fold in half along the long edge to create a card base of size 8 x 6 inches. Sponge the edges of the card front using Rose Madder ink. Adhere a mat layer of designer paper of size 7 1/2 x 5 1/2, using HCDP1-2149 Feathery Florals Paper Collection to the inside card panel.

Cut a piece of White cardstock of size 7 1/2 x 5 1/2, dry emboss with a floral design and sponge the raised area using Pink Peony and Rose Madder ink. Add this piece to the card front with a mat layer of Luxe Gold cardstock leaving a thin frame around, using dimensional tape.

Use HCD2-7426 Oval Filigree Frame Die to cut 2 pices of the decorative frame on White cardstock, stack and glue them together. Sponge some dries clear glue on the die-cut piece and add Lion's mane glitter. Add a mat layer to the oval center using a designer paper. Stamp the sentiment using HCPC-3847 Celebrate Love Sentiments Cling Stamp Set on White cardstock with Rose Madder ink. Cut the sentiment into a rectangle piece along with a mat layer of Gold cardstcok.

Stamp the images from HCPC-31018 Petite Feathery Florals Cling Stamp Set and HCPC-31017 Feathery Florals Cling Stamp Set onto White cardstock with Fern Green ink. Color the images using water colors and cut them using the coordinating dies. Sponge some dries clear glue and add Baby's breath glitter.

Add Gold micro pearls for the flower centers. Arrange and adhere the ready elements on the card front as shown, using dimensional tape. Finish off the card by adding pink rhinestones around the arrangement.

Other Products: Dimensional adhesive, funnel tray, scissors, paper trimmer, scoring board, die cutting machine, rhinestones, watercolors, water color brushes, Gold micro pearls, Poppy embossing folder

Instructions:

Card size is 6 x 6”. Score and fold 12 x 6” Deluxe Flower Shaping Paper at 6” to create a tent fold card base. Cut sheet 8B from the Feathery Florals Paper Collection 2x to 5 7/8 x 5 7/8” and ink the edges with Wilted Violet Distress Oxide ink. Adhere one to the inside of the card using dries clear adhesive. Stamp the ‘Hope your day is as Special as you are’ sentiment from the Just For You Sentiment Cling Stamp set on 5 x 5” white cardstock using VersaMark ink, cover with Ranger Super Fine Detail Black Embossing Powder and heat set using the Heat It tool. Ink the edges using Wilted Violet ink and adhere to the inside of the card using dries clear adhesive. Cut the 6 x 6" panel from sheet 10A, trim to 5 3/4 x 5 3/4”, ink the edges with Cracked Pistachio, adhere to the other purple panel using dries clear adhesive and adhere to the card front using dimensional tape.

Stamp the floral image from the Feathery Florals Cling Stamp set and the butterfly from the Petite Feathery Florals Cling Stamp set on glossy cardstock using VersaMark ink, cover with Ranger Super Fine Detail Black Embossing Powder and heat set using the Heat It tool. Using a small paint brush, color using Wilted Violet, Picked Raspberry, Cracked Pistachio, Black Soot and Fossilized Amber Distress Oxide inks. Diecut using the coordinating dies, diecut two more times each from white cardstock, adhere together, lightly shape using the Deluxe Flower Shaping tools and adhere to the card front using dimensional squares and hot glue.

Using a sponge, randomly add dries clear adhesive and sprinkle Crystal Ultrafine Transparent glitter on the card front to add some sparkle. 

Other Products: White Cardstock, Glossy Cardstock, VersaMark Ink, Ranger Super Fine Detail Black Embossing Powder, Misti, Distress Oxide Inks – Wilted Violet, Picked Raspberry, Cracked Pistachio, Black Soot and Fossilized Amber, Funnel Tray, Dimensional Tape, Dimensional Squares, Hot Glue Gun

Instructions:

Card size 4.25” x 9” (final size). Take pattern paper from HCDP1-2149 Feathery Floral paper Collection and adhere it on card base using designer dries clear adhesive.

Cut HCD3-7448 Slim Ornate Rectangle Die on white cardstock and on pattern paper and adhere them together a little offset, adhere it using foam tape. From the same die set cut outer die on white cardstock and stamp feather image from HCPC-31019 Floral Feathers Cling Stamp set using archival ink-Viridian.

Stamp HCPC-31018 Petite Feathery Florals Cling Stamp using versamark ink, sprinkle gold embossing powder, heat it and cut it with coordinating HCD1-7454 Petite Feathery Florals Die. Add crystal clear glitter randomly and adhere it with foam tape. Using same stamp set, stamp image using archival ink-magenta hue, cut flowers, color using same ink and sprinkle crystal clear glitter and add beads. Adhere using foam tape, as  pictured.

Stamp butterfly image from HCPC-7454 Petite Feathery Florals Cling Stamp on white cardstock using archival ink-mulberry and cut them with coordinating die. Color them using archival ink-pink peony and add crystal clear glitter, adhere iusing glue gun.

Cut one die from HCD3-7447 Slim Elegant Rectangle Die on white cardstock and add sentiment from HCPC-3845 Just For You Sentiments Cling Stamp using archival ink-magenta hue. Stamp feather image from HCPC-31019 Floral Feathers Cling Stamp using archival ink-magenta hue, as seen on picture.

Other Products: Big Shot Plus Machine, VersaMark Ink, Hot Glue Gun

Instructions:

Cut out a 4 1/2" x 9 1/4" card base, then cut a slightly smaller rectangle from your paper collection and glue it to the base. From the white paper and the paper collection, alternately cut all the pieces from the Slim Ornate Rectangle Die set as shown. Glue with Double Dots 100pc. -3D Foam Circles. Cut out the sentiment from black paper.

On the white paper, stamp the elements from the Feathery Florals set with black ink. Then color with inks: Memento Lady Bug and Memento New Sprout. Cut with coordinating die. Shape with the Deluxe Flower Shaping Kit. Stamp items from the Floral Feathers set with black ink on the white paper. Then color with inks: Archival ink Viridian, Memento Nautical Blue and Memento Elderberry.

Stamp classic rose flowers on deluxe flower shaping paper using Memento Lady Bug ink, color and cut with coordinating die. Shape using flower shaping mold. Layer flowers and add glue and yellow pirlls inside.

Glue everything as shown. Cover with glue and glitter.

Other Products: Cutting Machine

Instructions:

Base 7” x 7” - cut piece of Deluxe Flower Shaping Paper 7” x 7” and 7 ½” x 7”. Score at 1/2” along the 7 1/2” side and fold. Adhere the 7” x 7” piece to the front of the flap to create a base card 7” x 7”. Cut a piece of gold cardstock 6 7/8” x 6 7/8” and adhere to the front of the card. Cut a piece of green pattern paper 6 3./4” x 6 3/4” and adhere to the front of the gold card. Cut a piece of Deluxe Flower Shaping Paper 6 5/8” x 6 5/8” and adhere to the front of the green paper. Cut a piece of pink pattern paper 6 1/2” x 6 1/2 and adhere to the front of card.  Cut a piece of gold cardstock 6 1/8” x 6 1/8” and adhere to the front of the pink pattern paper. Cut a 6” x 6” panel from the paper collection featuring the pink flowers and adhere to the front of the gold cardstock.

Die cut two panels from the HCD1-7397 French Gate Die out of gold cardstock. Trim the corners and adhere to the four corners of the card.

Die cut two decorative dies from the HCD1-7370 Simply Elegant Centrepiece Die - one from Deluxe Flower Shaping Paper and one from gold cardstock. Add Frosting Powder to the white decorative die with Dries Clear glue and a sponge. Adhere the white decorative die to the gold decorative die offsetting the dies slightly. Adhere to the front of the card.

Stamp the large vase image from the HCPC-3982 Classic Floral Vase Cling Stamp Set in embossing ink and heat emboss with gold embossing powder. Die cut the decorative die from the HCPC-3982 Classic Floral Vase Cling Stamp set out of gold cardstock and adhere to the front of the vase as shown. Adhere to the front of the card with foam tape.

Stamp the feather and flower images from the HCPC-31017 Feathery Florals Cling Stamp Set and the HCPC-31019 Floral Feathers Cling Stamp Set in Jet Black ink on Iris cardstock. Colour the images with Zig Clean Colour Real Brush Markers and die cut with the coordinating dies. Add Crystal Clear glitter to the centres of the feathers with Dries Clear glue and then adhere to the back of the card as shown. Adhere the floral images to the front of the feathers with foam tape.

Die cut three dies using the ‘Love’ sentiment die from the HCD2-7340 Decorative Heart Die - two from gold cardstock and one from the pink pattern paper. Stack the three die cuts together with the pink on top.  Adhere to the front of the vase as shown and finish with 3D Lacquer and a sprinkling of Crystal Ultrafine Glitter.

Stamp the butterfly image from the HCPC-31018 Petite Feathery Florals Cling Stamp Set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Real Brush Markers and die cut with the coordinating die. Adhere to vase to the left of the sentiment die with foam squares. Add Crystal Ultrafine Glitter to the butterfly wings with Dries Clear glue.

To finish the card add pink iridescent gems to the corner dies as shown and Crystal Ultrafine glitter to the background of the card using Dries Clear glue.

Other Products: Iris cardstock, Pink Fresh Studio Jewels - Ballet

Instructions:

Create a top fold card measuring 5 1/2” x 7 1/2”. Choose a designer paper from Feathery Florals Paper Collection and cut it to the size 5 1/4” x 7 1/4”. Adhere it on white card base. Cut decorative gate twice in white using Lattice Swirl Gateway Die. Glue them together for an extra strength. Choose a designer paper from the same paper collection and cut a background by using the solid die from same die set. Now die cut accents from golden card stock using Filigree Accents Die. Adhere all die cuts to the card as shown.

Choose and stamp the images from Floral Feathers Cling Stamp Set, Feathery Florals Cling Stamp Set and Petite Feathery Florals Cling Stamp Set on smooth white card-stock using versamark ink and heat emboss it using golden embossing powder. Paint them using Zig Clean Clear Brush Markers. Cut all the images using their coordinating dies.

For the wild roses, stamp the flower petals with Vibrant Fuchsia archival ink using Small Wild Rose Stamp sets. Ink the flower centers using Vivid Chartreuse archival ink and color the flowers using Vibrant Fuchsia archival ink. Stamp the leaves from the leafy accents cling stamp set with archival fern green and color them using leaf green archival ink and Vivid Chartreuse archival ink. For the sunflowers, stamp flower images from Rustic Sunflower Cling Stamp Set on the Deluxe flower shaping paper using Brushed Corduroy distress oxide ink and color them using Sunflower archival ink and Goldenrod archival ink. Cut the flowers and leaves using their coordinating dies and shape them using their coordinating 3D shaping molds. Assemble the flowers and add  Ribbit prills to the wild rose and Express-O Yourself prills  to the centre of the sunflowers.

Add all the ready elements to the card as shown. Also cut a sentiment from same designer paper and add to the card using foam tape.For final look, apply Crystal Clear powder to the flowers and leaves using Art glitter dries clear glue.

Other Products: Die Cutting Machine, Score Board, Bone Folder, Smooth White Cardstock, Scissors, Rangers Golden Heat Embossing Powder, Heat gun, VersaMark Ink.

Instructions:

Ready card base size 9 by 5 3/4". Trim a panel on cream card measuring 8 3/4 by 5 1/2" and add this panel on the card base using dimentional tape. Trim the panel from Feathery Florals Paper Collection sheet number 10B measuring 8 1/2 by 5 1/4" and add this panel on the card base using clear glue.

Cut 3 strips on the cream card measuring 9 3/4 by 2", 9 by 2" and last 6 1/2 x 2 inches. Trim 3 pattern paper strips from the designer paper which are smaller than cream strips and adhere each on cream stip using clear glue.

Stamp the required images from Floral Feathers Cling Stamp Set and Petite Feathery Florals Cling Stamp Set on  vellum with Versamark ink, cover with white embossing powder and few on sea breeze embossing powder then  heat it using heat tool and die cut using coordinating die.

For the flowers, Stamp the clematis flower images using versamark Embossing ink on mint card, cover the images with snowflake embossing powder and heat using heating tool. Die cut the images using coordinating dies, color the centers of clematis with Salvage patina ink using daubers, use shaping stylus and groove golf shaping tool to shape the petals from back. Use hot glue to assemble the flowers as shown. For the centers add pearls using hot glue. Dab some Dries Clear glue onto a sponge, apply over the petals as desired, sprinkle with Nida Tanweer Glitter Powder and tap off.

Add mould made frame element on the center after placing stips on the card base using hot glue, Arrange all ready elements as shown using hot glue and dimentional tape. Trim sentiment from the paper collection add cream card under the sentiment.

To finish the card, embellish with sequins and decorative beads.

Other Products: Cream Card, Vellum, Mint Card, Nida Tanweer Magic Glitter Powder, Hot Glue, Decorative Beads, Sequins, Versamark Embossing Ink, Pearls, Mould Made Frame Element, Snowflake Embossing Powder, Salvage Patina Ink, Sea Breeze embossing Powder, dimensional Tape.