Instructions:

Fold white cardstock to 7 x 8" with fold on the top then use the biggest die from the Booklet Basics die set to cut leaving the up side of the die over-hanging fold by about 0.5". Cut out a white frame with the biggest die from the Booklet Frames die set. Cut out 3 cutouts with the biggest die from the Booklet Basics die set from the Moments in Time Paper Collection, adhere them to the base as pictured and bend a little their corners. Cut out a sentiment from the Moments in Time Paper Collection.

Stamp the clock from the Simple Moments Timepiece Cling Stamp Set in Toffee Crunch ink, repeat it 3 times. Color with promarkers and cut out each part with coordinating dies. Cut out a big circle with the same die from the gold cardstock. Adhere all to the base with adhesive tape as pictured.

Stamp blossoms from Large Wild Rose Stamp Set and Small Wild Rose Stamp Set in Magenta Hue ink onto Deluxe Flower Shaping paper, diecut with coordinating dies and shape with coordinating molds. For each bigger flower you'll need 2 layers, for smallest flowers you'll need 1 layer. Add some Assorted Bead Stamens to their centers. Stamp 11 flowers from Cottage Garden Hydrangea Cling Stamp Set onto Deluxe Flower Shaping paper in Leaf Green ink, cut out with coordinating die and shape with the Deluxe Flower Shaping Tools. Add some Tu Tu Pink prills to their centers. Stamp 2 branches from Leafy Accents Cling Stamp Set in Leaf Green ink, color them, cut out with coordinating die and shape with coordinating mold. Cut out 2 swirls with the Swirly Border Accent Die from the vellum. Use dimensional adhesive and hot glue to attach all elements onto card as pictured. To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers and the clock.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, sissal , self-adhesive pearls, promarkers

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 10” x 7”, score at 5” along the long side and fold. Die cut the shaped base by laying the No. 1 die from the HCD2-7383 Simply Classic Rectangle Frame Die set slightly over the edge of the fold.  Die cut the outer frame from pattern paper using the No.1 die from the HCD2-7383 Simply Classic Rectangle Frame Die set and adhere to the front of the card. Die cut two decorative frames using the No. 2 die from the HCD2-7383 Simply Classic Rectangle Frame Die set – one out of gold cardstock and one out of Deluxe Flower Shaping Paper.  Adhere the gold frame over the white frame and then adhere to the front of the card.

Stamp two clock images from the HCPC-3971 Elegant Moments Timepiece Cling Stamp Set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Real Brush Markers and die cut one complete clock and one inner clock with the coordinating dies. Adhere the inner clock image to the complete clock image.  Stamp the sentiment image from the HCPC-3973 Timepiece Sentiments Cling Stamp Set in Jet Black ink on Iris cardstock. Colour the image wih Zig Clean Colour Real Brush Markers and die cut with the No. 3 die from the HCD1-7379 Elegant Moments Timepiece Die set. Add 3D Crystal Lacquer to the clock face and when dry add to the clock. Adhere the clock to the front of the card with foam tape.

Stamp the leaf images from the HCPC-3835 Leafy Accents Cling Stamp set in Northern Pine ink on Deluxe Flower Shaping Paper. Colour with Leaf Green ink and Magenta Hue inks and die cut with the coordinating die. Colour the backs of the leaves with Leaf Green ink and shape using the coordinating mold. Add Crystal Clear glitter using clear gloss gel medium, trim and add to the bottom left and top right of the clock.

Stamp the rose images from the HCPC-3752 Classic Rose Cling Stamp set in Plum and Magenta  Hue inks. Colour the images with Magenta Hue ink and the centres of the Magenta flowers with Magenta Hue ink and the Plum flowers with Plum ink and die cut with the coordinating dies. Colour the backs with Magenta Hue ink and the edges of the Magenta flowers with Magenta Hue ink and the Plum flowers with Plum ink. Shape using groove golf tools and assemble in a variety of sizes using hot glue. Add some Indian Gold Nuvo Mousse. Add Crystal Clear glitter using clear gloss gel medium and adhere over the leaves as shown on the bottom left and top right of the clock as shown.

Stamp the small flower images from the HCPC-3752 Classic Rose Cling Stamp set in Lulu Lavender ink on Deluxe Flower Shaping Paper. Colour the centres of the flowers with Lulu Lavender ink and die cut with the coordinating die. Shape using the groove golf tool, pierce the centres and insert a light purple bead stamen and secure with hot glue. Add Ultrafine Crystal glitter using clear gloss gel medium. Trim the wires and insert as fillers around the roses as shown.

Inside of card. Die cut the outer frame from pattern paper using the No.1 die from the HCD2-7383 Simply Classic Rectangle Frame Die set and adhere to the inside of the card. Trim the edges on the left side to enable the card easily. 

Other Products: Iris cardstock, foam tape, clear gloss gel medium,

Instructions:

This sentiment book measures 5“ x 5 1/2“ plus the ribbon hanger when completed. This book has 5 pages and a cover.

Prepare all the elements used in this project by using the white card stock and the Sepia ink. First prepare the clock page bases by stamping and using the matching die from the Simple Moments Timepiece sets. Do this seven times, plus cut four extra die cuts. You will also need six die cuts from the design paper found in the paper pad for this collection, this will be the backing for each of the pages. From the Timepiece Sentiments set, chose three sentiment circles then stamp and die cut with the matching die found in the Simple Moments Timepiece die set. Find the circle die that fits the outside of the fancy swirl circle part of the clock and use this to die cut the photo to go onto the clock face. Taking into account when die cutting the photo, this circle will be larger than what will be seen when finished. What you will see when all is put together will be the same size as the clock face circle. Using the same circle die used to cut the photo die cut from the white card stock five circles, these will be used for hand written journaling.  When adding colour to the clock elements, the inks used will be Thistle and Leaf green unless stated.

Use the Classic Rose sets to make three roses, each rose has 3-4 petal layers. The ink colour used is Thistle. Watch the film to see how they are made. For the hydrangea petal flowers, use the Cottage Garden Hydrangea sets, one petal plus a blue coloured stamen cut in 1/2 for each flower. The colours used are Magenta Hue and French Ultramarine. The leaves, use the plain leaf vine with 10 leaves on it from the Leafy Accents sets. Some of the leaves will be trimmed away from the vine to be used in the flower clusters. In total there will be 26 leaves used in this project so make at least 3-4 leaf vines. The colours used for this is Leaf Green and Sap Green.

To make the two clock pages with the photo: for this book:- Using a stamped clock and the die that matches the clock face, die cut out the clock face for each page. Colour the clocks with the inks and the aid of the daubers. Apply clear drying adhesive to the back side of the edge of the circle holes. (not stamped side) Place the pre-cut photos to close the hole in the clocks. Taking the pre-cut design paper clock backings and adhere these to the back of each clock. Taking the journaling circle, ink the edges then adhere this also to the back of the clock page. Trim away the clocks feet and the bell hammer. Apply the diamond stickles to the swirls and put aside to dry.  When dry, using a hot glue gun to adhere in a cluster, the hydrangea petal flowers and leaves on each page as shown.

To make the three sentiment pages for this book: Taking a pre-stamped and cut clock  and one of the sentiments, colour with the inks. One of these pages will be the book back page therefore adhere two of the extra card stock die cuts to the back of this page. This page does not have a journaling circle, the other two do. Adhere to the back of each page a collection design paper die cut. Taking the remaining two journaling circles and ink the edges then adhere these to the back of the clock pages. Adhere to each page a circle sentiment to cover the clock face. Trim away the clocks feet and the bell hammer. Apply the stickles to the fancy swirls and the edge of the sentiment circle, when this is dry, arrange and adhere the flowers and leaves in clusters as seen in the project photo.

To make the front page:- Taking one of the remaining clocks and the circle die that fits the fancy swirl frame in the stamped image, die cut this out. The rest of this clock image will not be used. With the last remaining clock page,  die cut the clock face with the matching die, use also at the same time the die that cuts the circle with the clock handles. Secure the dies with the washi tape so the dies will not move as you are cutting. Add colour with the inks to all the die cut elements.

Adhere the fancy swirl frame to the clock front using the 3D double sided foam tape. Adhere the two extra card stock and design paper die cuts of the clock to the back of the clock, adhere also the journaling circle  in place. Flip the page over and with the 3D foam dots or the 3D double sided foam tape adhere the die cut clock face in place over the stamped clock face. Apply the stickles to the clock face circle edges. Arrange and adhere with the hot glue gun the roses, leaves and the hydrangea petal flowers in clusters as pictured. Trim away the clock feet, leave the bell hammer alone on this book cover.

To hold the book together, use the organza ribbon. Using a 14 “ length of ribbon, thread this through all the clock handles then fold in half and tie a knot about 1  1 / 2 “ – 2 “ from the fold. From another piece of ribbon make a triple bow. Using the hot glue gun, adhere the bow to the knot in the ribbon then adhere to the bows knot two hydrangea petal flowers. Now make another knot in the ribbon 1 - 2 “ above the bow. This last knot makes a loop so you can not only lay it on a table but you can hung it on a door, cabinet or draw handle.

Other Products: Inks: Ranger Archival Thistle, Sap Green. Other: Double sided tape, Diamond Stickles, Fussy cutting scissors, Misti, 3D foam card stock, Hot Glue Gun, 3D double sided foam tape, Washi tape, Green organza ribbon, 2 photos.

Instructions:

It’s a ready folding card size 9 by 6 inches, cut a panel on Deluxe Paper measuring 8 3/4 by 5 3/4" and adhere on to the card base using dimensional tape. Trim a panel from Moments in Time paper collection sheet number 9B measuring 8 1/2 by 5 1/2" and color the panel corners with light house ink using ink blending brush, then adhere on the white panel using clear glue. Cut another panel on Deluxe Paper measuing 7 3/4 by 4 3/4" and adhere on the card using dimensional tape, trim another panel from paper collection measuring 7 1/2 by 4 1/2" color the corners with light house ink and adhere on the card using clear glue.

Die cut two shapes of second smallest die from Simply Classic Oval Frame Die on Deluxe Paper and adhere on the card as shown using clear glue.

Stamp the image from Elegant Moments Timepiece Set on brown cardstock with Versamark ink cover with Gold Tinsel Embossing Powder, heat it using heat tool, die cut using main clock coordinating die and make a window on timepiece by using circle die from same die set. die cut shadow die on the brown card as well and set a side.

Stamp the precious time sentiment stamp from Timepiece Sentiments Cling Stamp Set on the deluxe paper using versamark ink cover with gold tinsel embossing powder, heat it using heating tool and die cut using circle die from same set. Adjust sentiment on the shadow diecut and adhere using clear glue and adhere front timepiece die cut on the shadow die cut using clear glue.

For the flowers, stamp flower images from rustic sunflower collection on to the pink vellum Paper and other images from Rustic Sunflower Bucket Stamp Set on green vellum paper using versamark ink cover with white embossing powder heat it using heating tool. Die cut using coordinating dies, shape the flowers using shaping kit, make a few flowers, add three layers of same size for making each flower two layers for small flowers. Add clear glue in the centers sprinkle pearls and glass beads. Apply clear glue on the flowers with brush and dress up with Nida Tanweer Magic Glitter Powder.

Make a bunch of flowers on the left side and arrange all elements as shown using hot glue gun.

Embellish the card with Nuvo Drops.

Other Products: Die Cutting Machine, Brown Cardstock, Nida Tanweer Magic Glitter Powder, Light Pink Vellum Paper, Green Vellum Paper, Versamark Embossing Ink, Gold Tinsel Embossing Powder, Ink Blender Brushes, Brush, Dimensional Tape, Hot Glue Gun, Pearls, Glass Beads.

Instructions:

The ready card base from smooth white cardstock measures, 5 1/2″ by 8 1/2″. Choose the designer paper from Climbing Clematis Paper Collection and cut to size measuring 4 3/4″ by 7 3/4″ and glue it on the white cardstock creating a sleek border of 1/16″ on all the sides. Further mat the panel on Gold cardstock, again making a delicate border of 1/16" on all sides. Layer the panel on the ready card base using double-sided tapes.

Choose a dark color plainer paper from the designer paper collection and cut a solid cover for the frame using Fancy Classic Rectangle Frame Die. Cut fancy frame 1 piece each from gold and white card stock and glue them together keeping gold on the top and glue the frame on the solid cover using glue that dries clear. Wrap 1" satin ribbon around the panel and secure it on the back using tacky glue.

Next, cut the inner solid piece from the coordinating paper and glue the second white die cut frame as shown. Layer this panel on the previously created panel using glue dots.

For the flowers, Stamp multiple images of mixed florals from Wild Aster Cling Stamp Set on Deluxe flower shaping paper using Plum Archival Ink and cut them using their coordinating dies. Color the flowers using Cactus Flower Archival Ink and shape them using Deluxe Flower Shaping Kit. Prepare 2 large and 3 medium flowers. Also stamp, color, and shape a few Wisteria flowers. Complete all the flowers by adding prills in the centers.

Stamp 3 leafy vines using Olive Green archival ink on Deluxe Flower Shaping Paper, color them using Leaf Green and cut them using its coordinating die. Next, shape them using its coordinating mold.

Once all the elements are ready, assemble the flower bouquet on the right side top corner of the card and finish the card by adding stamped sentiment using Celebrate Love Sentiments Cling Stamp Set.

Other Products: Smooth White Cardstock, Die-cutting machine, Score Board, Sharp Scissors, Double-sided tape,

Instructions:

Create a 5 x 7" card base with white cardstock. Cut a 4.75 x 6.75" piece of designer paper from the Moments in Time Paper Collection, distress with Plum and adhere to card front.

Cut the decorative die from the Simply Classic Rectangle Frame Die in Luxe Gold card stock, and the center die in pink designer paper from the Moments in Time Paper Collection, adhere to card front.

Stamp clock from the Elegant Moments Timepiece Cling Stamp Set in Jet Black twice, color the outer part of one and the inner part of other with Zig markers, cut out with coordinating dies. Cut out the center two circles in Luxe Gold Cardstock twice to form a ring for around the clock face and the sentiment. Stamp the sentiment from the Timepiece Sentiments Cling Stamp Set in Jet Black, cut out with circle die from the Elegant Moments Timepiece Cling Stamp Set and distress with Rich Cocoa, also distress clock face with Rich Cocoa. Adhere clock together with foam tape, adhering sentiment in center. Adhere clock face to gold frame and adhere beside clock as shown in photo.

Stamp the Sweet Magnolia Buds Cling Stamp Set in Rich Cocoa and sponge with Vivid Chartreuse, Vibrant Fuchsia, and Rich Cocoa, cut out with coordinating dies.

Stamp the Sweet Magnolia Cling Stamp Set in Vibrant Fuchsia, cut out with coordinating dies and sponge with Plum in centers and Vibrant Fuchsia on outer petals, sculpt with the 3D Magnolia Shaping Mold and add stamens and glitter.

Arrange and adhere branches and flowers as shown.

Other Products: White cardstock, Bristol Smooth Cardstock, adhesive backed foam

Instructions:

My finished card size is 4 1/4 x 5 1/2". Make card base and cut a piece of Sheet 7B of the paper collection and cover front. I edged it with Cactus Flower ink before gluing it down. I picked a sentiment piece from Sheet 4B of the paper collection and cut it out and rounded the corners. Edge with Cactus Flower Ink and use dimensional tape to adhere to card front.

Stamp the flower petals using Cactus Flower ink onto Deluxe Flower Shaping Paper. I colored the edges with Cactus Flower and cut out with coordinating dies. Stamp the leaves using Fern Green and color using Leaf Green and then cut out using coordinating dies. Lay petals and leaves onto coordinating molds, spritz with water and run through die cut machine. Turn out onto desk to dry. Once dry apply prills to the centers and glitter the edges using Dries Clear Adhesive and Hydra sponges then sprinkle with glitter.

Once everything is dry, decide on placement and hot glue down. Tie the string into a loopy bow and glue to card front. The card is finished!

Other Products: Die Cut Machine, Hot Glue Gun, White Cardstock, Dimensional Tape, White String

Instructions:

Prepare a white card base 6 x 6” with a piece of the Moments in Time paper (10A) layered on top.

Die cut one of the Simply Elegant Centerpiece dies (2nd in the set) from white card stock, glitter the front and adhere to the center of the card.

Stamp the Timepiece Sentiments on white with the Lilac Posies Ink, cut out with the 4th circle die from the Simple Moments Timepiece die set, add foam dots to the back and adhere to the center of the card.

Stamp the Magnolia Buds on white with the Bamboo Leaves ink, color in with the Pistachio ink and the buds with the Lilac Posies. Cut out with the coordinating die, arrange on the card.

Stamp the Sweet Magnolia flowers on white with the Lilac Posies ink, color in with the Pistachio ink, cut out with the coordinating die, ink the edges with more of the Lilac Posies ink, place in the matching mold and run through the die cut machine to shape. Put 2 together to make one flower, make 4.

Stamp the Sweet Magnolia leaves on white with the Bamboo Leaves ink, color in with the Pistachio ink, cut out with the coordinating die, ink the edges with more of the Bamoo Leaves ink, place in the matching mold to shape. Arrange around the Bubs and flowers.

To finish the card, add glitter to all the leaves and flowers. Add gold glitter to the inner circle in the sentiment piece as shown. Add Pearls to the center of each flower.

Other Products: Paper Trimmer, Die Cut Machine, Hot Glue gun, White Pearls

Instructions:

Card size: 4 3/4" x 6 3/4". Make a shaped card (see video) with the outer die of the Decorative Circles Frame. Lay the die over-lapping folded top by about 1/4", also cut another full front piece to glue onto card base (purple used here).

Cut the inner decorative die out of lavender decorative paper and out of Gold Luxe. Cut the largest eyelet circle from purple cardstock and from Gold Luxe, also cut a foam sheet circle to fit under stacked purple and gold. Glue sets together off setting slightly. Cut the next eyelet circle out of decorative lavender paper. Glue to card starting with largest to smallest die cuts (one set is popped up).

Stamp the clock using Tuxedo Black onto white cardstock, die cut decorative circle out of clock and the clock face, cut a circle of foam sheet to fit clock face as well. Stamp extra hands and die cut, die cut from gold as well. Stamp sentiment and die cut. Color decorative piece and sentiment piece. Glue the decorative circle to the lavender eyelet circle (should just barely show) then glue the foam circle and sentiment onto decorative circle.

Cut a gold scallop circle large enough to barely show under the clock face and cut a piece of foam sheet to fit as well. Glue the gold hands and colored hands onto clock face over printed hands, glue the clock face, gold scallop circle and foam circle onto card up in the left corner.

Stamp flowers using Majestic Violet on Deluxe Flower Shaping Cardstock, sponge with the same color, die cut then form in the shaping mold (see videos). Finish forming with the Deluxe Flower Shaping Kit then glue 2 of the same size together per flower. Insert white stamen (the larger flowers have the white bead stamen and the white pollen stamen.

Stamp leaves using Fern Green onto Deluxe Flower Shaping Cardstock, sponge with Leaf Green and Majestic Violet, die cut, sponge the backs then shape in the mold.

Use a hot glue gun or tacky glue to glue flowers and leaves onto left side of card up and over clock as well, just leave part of it showing to give the idea of a timepiece to go with sentiment.

Glitter all the flowers and card front (try to keep glue off of gold cardstock). Mix Shimmer Additive and 3D Lacquer together then paint onto leaves.

Other Products: White cardstock, purple cardstock, foam sheet, Copic Markers: V12, V15, YGO3, YG25, Shimmer Additive

Instructions:

Ready side fold card measures 5" × 7". Cut a mat from designer paper using biggest outer die from the set. Distress edges with matching ink and adhere it on ready card base. Stamp sentiment on it using majestic violet ink. Cut a decorative frame from white cardstock using second largest die from the set. Also cut 2 decorative pieces from white cardstock using Ornate Pocket Accent die. Trim die cut pieces and glue on frame from back side and adhere it on card using foam dots. Cut a circle Frame from designer paper using circle dies. distress edges with matching ink and adhere it on card as pictured.  

Other Products: White Cardstock, Hot Glue

Instructions:

Cut a shaped card base from white cardstock using largest shaped die from Elaborate Oval Frames Die.  Also cutva mat from designer paper using same die. Distress edges with matching ink and adhere it on card base. Cut a decorative oval frame from white cardstock using die from the set. Adhere a piece of clear cardstock from the back side of frame to cover the window. Stamp sentiment on card using majestic violet ink. Add shaker elements and adhere decorative frame on card using foam strips to create shaker card.

Other Products: White Cardstock, Hot Glue, Shaker Elements

Instructions:

Card size 5”x7” (final size). Take pattern paper from HCDP1-2134 Moments in Time Paper Collection, tear edges and adhere it using designer dries clear adhesive.

Cut some dies from HCD1-7204 Arrows and Banner Die on white cardstock and pattern paper from the collection, tear the edges and turn the arrow edges using ball tool and adhere using foam tape as pictured.

Now cut one die from HCD1-7271 Rounded Window Frame Die on white cardstock, add archival ink-cactus flower, add crystal clear glitter, adhere it using foam tape..

Now stamp one image from HCPC-3972 Simply Moments Timepiece Cling Stamp Set on white cardstock using archival ink-cactus flower and cut it using coordinating die from HCD1-7380 Simple Moments Timepiece Die, add archival ink-cactus flower, adhere it using foam tape.

Now add sentiment from HCPC-3973 Timepiece Sentiments Cling Stamp Set and cut it using die from HCD1-7380 Simple Moments Timepiece Die.

Randomly add crystal clear glitter.

Other Products: Big-shot plus machine. white card-stock

Instructions:

Find both pieces of the patterned paper that has the dark purple border. Cut each at the 6” mark, flipping one around to mirror the other. I wanted that simple border around the whole layout. Tape the pieces together. Cut a strip of the green patterned paper that is 5 x 12" and add strips of white torn cardstock to either side. Find and cut out both of the burgundy border strips. Add them to either side of the border piece. Adhere this whole chunk down a little left of center.

Mat the photo in white cardstock and add gold photo corners. Then mat that in burgundy patterned paper. Use foam tape between those layers. Add the matted photo to the green patterned strip. Find and die cut out the 2 tags used and add them above the matted photo. Add burlap string bows to each.

Find and cut out the “a moment in time” sentiment block. Adhere this to the right of the matted photo using foam tape. Add 2 of the mini journal blocks to the right of the sentiment.

Die cut the decorative circle die from white cardstock. Cut it in half and add a half piece to the right of the matted photo.

Stamp 2 of the Elegant Moments images using brown ink (Staz On- Timber Brown) onto white cardstock. Die cut 1 full image and 1 just the middle decorative section. Stamp and die cut the clock face using an embossing pad and gold embossing powder. Add color to the clock pieces using Zig Clean Color Markers and a waterbrush (Light Violet, Beige, Mid Brown). Adhere the clock pieces together using foam tape. Adhere the clock to the bottom right hand corner of the layout.

Stamp and die cut out 3 sets of each size of the Wild Rose flowers using pink ink (Archival- Rose Madder) onto deluxe flower shaping paper. Add color to the flowers using the same pink ink and daubers. Shape the flowers using the coordinating 3D shaping mold. Assemble the flowers and add light yellow beads to the middle of each using a liquid adhesive. Stamp and die cut 2 sets of the leafy accent leaves using dark green ink (Stampin Up- Handsome Hunter) onto deluxe flower shaping paper. Add color to the leaves using green ink (Stampin Up- Mint Macaron) and daubers. Shape the leaves using the coordinating 3D shaping mold.

Add flowers around the matted photo and clock. Then add pieces of the leaves around the flowers.

Other Products: Burlap String, Cardstock- White, Waterbrush, Beads, Embossing Pad, Gold Embossing Powder, Stampin Up Ink (Handsome Hunter, Mint Macaron), Scrapbook Adhesives by 3L (Crafty Foam Tape, Dual Tip Glue Pen, Adhesive Dots Medium, E-Z Runner Ultra, Creative Photo Corners Gold, 3D Foam Squares)

Instructions:

Make a square base using white card stock.. To make the card base, cut white paper measuring 12”  x 6”. Score at 6” on the longer side and fold.

Cut pattern paper a little smaller than the card base, from the paper collection. Adhere the piece on the card, leaving 1/8” border all around. Cut a square card panel from the paper collection and adhere to the card front. Cut another A2 card panel from the paper collection and add to the card in a tilted way.

Cut a square card panel from the pattern paper and trim the frame to make it smaller in size. Remove the center part using the paper trimmer. Add the whole piece on a piece of kraft card paper. Remove the center part of the kraft paper also to create a window.

Stamp the image of the Simple Elegant Moments timepiece stamp set in jet black ink on Deluxe Flower shaping paper . Color the image using distress inks. Cut with the coordinating die.

Cut a die cut from the inner die set of the Rounded Window die. Adhere this on the time piece.

Stamp the sentiment from the Timepiece Sentiments stamp set with Jet Black ink on Flower shaping paper. Cut with the matching circle from the Circle die set. Adhere the sentiment on the time piece die cut.

Stamp the Roses in Pink Peony ink on Deluxe flower shaping paper using the biggest stamp from the Classic Rose stamp set. Color with the Pink Peony and Plum ink with sponge daubersand die cut. Shape the flowers in 3D Rose shaping mold. Follow the video to make the flowers.

Stamp, color and die cut the leaves from the classic Rose collection using the Green inks and coordinating die.

Make Clematis flower from the Clematis stamp and die set. Use the Pink Peony and Plum Ink to color the flowers. Make leaves. Add Stamens and Prills in the center of the flowers

Make small green filler flowers from the smallest flower of the Classic rose stamp and die set. Add white stamens in the center.

Arrange the Rose flowers, clematis flower and the leaves on the card to finish it.

Other Products: White card stock, scoring board, die cutting machine, Distress inks-Peeled Paint, Aged Mahogany

Instructions:

Mat and layer Cascading Petals Paper Collection sheet 6A size 3 7/8 x 5 7/8” onto 10B 4 x 6” onto 8B to fit inside 5 x 7” card blank edged with Deep Purple. Stamp in Deep purple ‘To the world you may be one person but to me you are the world’ from For My Friend Sentiments Cling Stamp Set.

Cover the front of the card with Cascading Petals 10B edged in Deep Purple. Cut 6B 4 7/8 x 6 7/8” mark out in pencil 1” top and sides and 1/2” bottom and use as a guide to repeat cut 3 x 2” horizontal Eyelet Rectangle and Basics to create an aperture 3 x 5 1/2”, edge with Deep Purple.

Die-cut Decorative Cage in Luxe Gold Cardstock, shape to create a curved cage, adhere across the aperture, tucking in the bottom bar of the cage, adhere Cascading Petals 2B behind the aperture and mount onto the front of the card with Dries Clear.

Stamp onto Deluxe Flower Shaping Paper Wisteria Petals in Deep Purple. Colour with Viridian, die-cut and edge in Cactus Flower and Deep Purple. Shape with Deluxe Flower Shaping Kit and thread onto wired Assorted Bead Stamens Medium securing with hot glue. Hot glue trimmed down stamens into some petal centres.

Stamp onto white cardstock in versamark and gold heat emboss Cascading Wisteria, colour with Zig Clean Colour Real Brush Markers and die-cut. Shape with Deluxe Flower Shaping Kit and adhere over the wisteria flowers.

Die-cut Ornamental Tags, stamp and edge in Deep Purple ‘Hey Friend’ For My Friend Sentiments Cling Stamp Set. Hot glue a thread bow to the tag and secure to the card with a dot. Add a self-adhesive gem over the knot.

Other Products: Paper trimmer, scissors, hot glue, gem, thread or twine

Instructions:

The finished card measure 6 x 6 inches. Cut a piece of white cardstock in deluxe flower shaping paper 12 x 6 inches and score at 6 inches to make a side fold card.  Cut all the squares in the paper #4B ( 6 x 6", 5 1/4 x 5 1/4", 4 1/2 x 4 1/2").  Glue them on each other on your card base with 3D foam. Add shimmer on the paper with the glitter gloss nuvo shimmer pen.

Stamp your Wild Rose flowers with Plum ink onto white flower shaping paper. Color the inside of the flower with the New Pprout ink. Ink the edge with the plum ink.  Diecut with the coordinating die. Place facedown into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe flower shaping kit tools. Glue 2 layers together. In the center of the flowers add stamens. (Color some of the white stamens with the plum ink). Make 1 big, 1 medium, 1 small in plum and 1 small in new sprout color. Add glue to your flowers and spread Crystal clear powder on the flowers. Make leaves with the same technique in leaf green ink.

Put cheesecloth, sewing thread and ribbon at the right of your card and arrange your flowers and leaves over it.  Cut a sentiment from the paper collection sheet #4B and glue it with 3D foam in the middle of your card.

Other Products: Water mister, hot glue gun, hot glue, scissors, sewing thread, ribbon, cheesecloth, nuvo shimmer pen glitter gloss

Instructions:

Cut out the white base of the card and fold it to 7 3/4" x 5 3/4". From the paper collection, cut a 7 1/2” x 5 1/2" rectangle and glue to the base. In the center, glue a frame with the sentiment, cut from the collection of paper.

Cut the largest frame from the Simply Classic Rectangle Frame Die set from white paper and transparent foil. Then, in the white frame, cut the center with a smaller die. From the collection paper and silver paper, cut a smaller frame and adhere it to the white frame. Adhere the transparent foil that you cut earlier under the frame.

Cover the edges of the frame with dimensional tape so that the small elements placed in it cannot get out. Put some glitter and sequins in the middle of the card and glue a frame with foil on it. The sequins must be movable inside.

To create flowers, stamp Poinsettia on the Deluxe Flower Shaping paper a few times using Green ink then shadow the edges of the petals with the same ink and the middle with pink ink and die cut using the coordinating die. Shape with the coordinaing mold. Add glue and pink stamens inside .

To create leaves, stamp the leaves from Holly Berry Spray Cling Stamp Set on the Deluxe Flower Shaping paper with Ranger Archival Ink Pad - Library Green , die cut with the coordinating die, shade using this same ink and Leaf green ink.

Arrange all the elements as shown, add cover with glue and sprinkle with glitter, add a ribbon.

Other Products: Sequins, Dimensional tape, ribbon, cuting machine

Instructions:

Cut 3 5 x 5” white cardstock to create a 5 x 5” gatefold card. On 5 x 5” adhere Delightful Daffodil Paper Collection 9B with Dries clear and spread the glue to cover. Mark in a light pencil line at 2 3/4”. Position Delightful Daffodil Spray over the pencil line lining up the centre daffodil outer petals and partial die-cut both pieces by overhanging the smaller section of the die off the cutting plate, edge with Seafarer and score a tab 1/2” on the straight side of each panel (rub out the pencil line). Die-cut 2 white cardstock Swirly Accent Spray and adhere, lining up with the score line.

Adhere each tab to the white cardstock 5 x 5” piece, add ribbon and cover with Delightful Daffodil Paper Collection 9B edged in Seafarer.

Stamp in versafine onyx and clear heat emboss Delightful Daffodil Spray and Peony and Sunflower Banner. Colour with Zig Clean Colour Real Brush Markers and die-cut. Mount the daffodil sprays with dots lining up with the partial die-cut panels. Adhere the butterfly and bee with dots.

Stamp in Jet Black ‘sending you a Hug’ Cheerful Note Sentiments and die-cut the with the Sunflower banner die, edge in Sky Blue and adhere on dots to the inside centre of the card.

Add shimmer with wink of stella clear.

Other Products: Paper trimmer, scissors, wink of stella clear

Instructions:

The ready top fold card measures 8″ by 6″. To prepare the white card base, cut one piece measuring 8″ by 6″ and the second piece 8 1/2″ by 6″. Score the second piece at 1/2″ on the longer side and glue the first piece on top. For the topmost layer, choose the paper from Rustic Sunflower paper pack and cut 71/4″ by 5 1/4″. Next, mat it o a white cardstock a little bigger creating a delicate white border all around. Layer the ready panel on the card front as shown.

Cut all the required die cuts as from white and gold cardstock using Simply Classic Oval Frame die. Glue the delicate outer gold frame on a white die-cut to add extra strength. Cut the lower solid cover die in white and distress it using Peacock Feather distress ink to match the pattern paper. Cut the center oval frame in white and gold cardstock. Adhere gold die-cut on the back peeking through the whites. Layer the frame using double-sided tape. Adhere the remaining element of the die-cut to the empty window as shown.

Add satin ribbon across the die cut panel and secure it from the back using tacky tape. Layer the panel on the card front.

Stamp the Sunflower banner with black archival ink on white cardstock and paint it using Zig Clean Color Real Brush Markers. Cut the banner using its coordinating die securing the window die with the blue printer's tape. Cut the solid cover of the banner die and stamp the sentiment from For My Friend Sentiments Cling Stamp Set using black archival ink.

Stamp the butterfly image from Delightful Daffodil & Butterfly Cling Stamp Set with Versamark on Rajni Chawla's Vellum Floweret paper and sprinkle gold embossing powder. Sprinkle gold embossing powder, dust extras and then heat set the image. Cut the butterfly image using its coordinating die. Cut the wings die from the same set using Luxe gold cardstock and adhere to it as shown. Finally, embellish the butterfly with some rhinestones.

Once all the elements are ready assemble the card as shown.

Other Products: Smooth white cardstock, Adhesive that dries clear, Foam dots, Score Board, Die Cutting Machine, Versamark Ink, Heat Tool, Funnel Tray.

Instructions:

Die cut a piece of white cardstock using the die from Fancy Classic rectangle frame die and emboss it using Spellbinders Tan Embossing mat and Mudra Indian Ornate Mandala Stencil. Take a piece of 6" x 5 1/4" white cardstock and score it at 3" to make a 3" x 5 1/4" top folding card base. Adhere this behind the embossed piece. Die cut a piece of luxe gold cardstock using the die from the same set and adhere it on the card front.

Stamp the flowers from Large Festive Poinsettia Cling Stamp Set and Small Festive Poinsettia Cling Stamp Set with Carnation Red Archival Ink on a sheet of Deluxe Flower Shaping Paper. Ink them with the same ink using oval makeup brush. Die cut them using the matching dies from Large Festive Poinsettia Die and Small Festive Poinsettia Die.

Stamp the leaves from Large Festive Poinsettia Cling Stamp Set with Leaf Green Archival Ink on a sheet of Deluxe Flower Shaping Paper. Ink them with the same ink using oval makeup brush. Die cut them using the matching dies from Large Festive Poinsettia Die.

Shape them all using Large 3D Festive Poinsettia Shaping Mold, Small 3D Festive Poinsettia Shaping Mold and Deluxe Flower Shaping Kit. Apply Designer Dries Clear Adhesive on them using Hydra Sponges and sprinkle Craftangle Shimmer Dust glitter. Add a little Lettuce Entertain You Prills to the poinsettia centers. Arrange and adhere the poinsettia and leaves as shown on the card front. Glue a few rhinestones and green pearls on the die cut background to add finishing touch.

Other Products: Mudra Indian Ornate Mandala Stencil, DMC Mini Score Board, Spellbinders Tan Embossing mat, CraftTangles shimmer dust, oval makeup brush, rhinestones and pearls.

Instructions:

Prepare a foldable base approximately 6" x 4.25" from the white cardstock.

Use an interesting background, made by diecutting a poinsettia mask and coloring red with Black Cherry ink on thin 80g printer paper. Crop the background to approximately 5.75" x 4". Make decorative lines along all sides as shown using the Scor-Pal Measuring & Scoring Board. Adhere with double-sided adhesive tape to the base.

Trim a piece of parchment paper to an approximate size of 5.25" x 3.75".

Using black Jet Black ink, stamp the image of the church from the HCPC-3960 Holiday Village set onto a white cardstock. Cut with matching dies. Paint with watercolor paints in yellow, orange, red, green, brown and black. On a small strip about 0.5" x 4" in size, stamp the sentiment from the Holiday Village using the Black Cherry color.

Cut out 2 snowflakes from the white cardstock using the HCD2-7363 Holiday Snowflake Frame Die.

Arrange the composition as shown. Arrange the snowflakes at the top and bottom. Fix all the elements on the vellum with glue. Adhere the parchment in places obscured by pictures. At the bottom, attach a strip with the sentiment.

On the image of the church, apply a white chalk paint resembling snow. Decorate the center of the snowflakes with light blue crystals.

Other Products: Cutting machine, paper trimmer, watercolor paints, brush, blue crystals, white chalk paint, 80g printer paper, double-sided adhesive tape

Instructions:

Card size is 4 1/4 x 9”. Score and fold 8 1/2 x 9” white cardstock at 4 1/4” to create card base. Cut Luxe Gold cardstock 2x at 4 1/8 x 8 7/8”. Cut white cardstock 2x at 4 x 8 3/4". Using a corner rounder punch, round the corners of the card base, the Luxe Gold mat layers and the white mat layers. Stamp the sentiment ‘Have a Very Merry Christmas’ from the Holiday Village Cling Stamp set in Archival Jet Black ink and stamp the small poinsettias from the Large Festive Poinsettia Cling Stamp set on one of the white mat layers, adhere it to the gold layer and adhere to the inside of the card.

Emboss the second white mat layer using a snowflake embossing folder, adhere it to the second Luxe Gold mat layer and adhere to the card front. Using the top two inside dies and the middle two inside dies from the Ornate Flourish Gateway Die, cut the mat layer from Luxe Gold cardstock and cut the intricate layer from white cardstock x1 using the middle dies and x2 using the top two dies. Adhere the layers together and adhere to the card front as shown using dimensional squares.

Stamp the Large Festive Poinsettia on red metallic cardstock and the leaves on green metallic cardstock using VersaMark, cover with WOW Metallic Gold Sparkle Embossing Powder and heat set using the Heat It tool. Diecut using the coordinating dies and shape in the 3D shaping mold. Pierce the flower centers using the Groove Golf Tool and insert the Gold Stamens. Use two flowers to create the poinsettia making sure to offset them. Stamp the Holly Berry flourish on Luxe Gold cardstock using VersaMark, cover with metallic gold sparkle embossing glitter and heat set using the Heat It tool. Shape using the Deluxe Flower Shaping Kit.

Adhere the flourish, the poinsettia and the leaves to the center of the card front using hot glue. Make a multi-loop bow using gold cord and adhere under the poinsettia.

Other Products: Diecutting Machine, Corner Rounder Punch, White Cardstock, Red Metallic Cardstock, Green Metallic Cardstock, Versamark, WOW Gold Metallic Sparkle Embossing Glitter, Gold Cord, Snowflake Embossing Folder, Real Red Ink Pad, Misti, Bow-It-All 2