Instructions:

Cut 6 x 6" size piece of white cardstock. Cut another piece of white cardstock to 6 x 6 1/2", score and fold at 6". Attach this piece to the 6 x 6" size piece to create card base. Cut another piece of white cardstock to 4 x 5 1/4" size. Stamp the 6 x 6" and 4 x 5 1/4" panel using the ‘In Appreciation’ sentiment in Pink Peony ink to create a  sentiment background. Cut a green panel of 4 3/16 x 5 7/16" size from sheet 4B of the Floral Sentiments paper collection. Take the frame and center cutout die from HCD1-7461 Grateful Floral Sentiment Die, laying the frame in the center of white panel. Only attach the center cutout die, remove the main frame and diecut. Now lay the white panel on top center of the green panel to figure out the placement for cutting out same die piece. Diecut the center cutout die from green panel. Diecut the same die from center of card front. Sponge the edges of card front and white panel with Pink Peony ink. Attach the white panel on top of the coordinating green panel. Sponge around the opening of panel with Vivid Chartreuse ink and then also use Leaf Green on the top left and bottom right of opening. Sponge the Vivid Chartreuse ink in a rectangular shape on the card front to create a backshadow for smaller panel. Using from the HCD2-7402 Filigree Companion Frame Die, diecut 2 of the large rectangle Frame from white cardstock. Use a yellow sponge and Dries Clear glue to attach the 2 frames on top of each other to create sturdiness. Attach this frame onto the card as shown. Attach the layered panel onto card as shown using dimensional adhesive.

Stamp the frame sentiment twice from HCPC-31025 Grateful Floral Sentiment Cling Stamp Set in a combination of French Ultramarine and Viridian onto Deluxe Flower shaping cardstock and diecut one for the frame and the other for the word ‘Grateful’. Clean the stamp and reuse, this time stamping in Lighthouse ink, stamp off on scrap paper, then ink with Vibrant Fuchsia and stamp onto white cardstock. Repeat this again and diecut both frames, using both the outer and inner piece of die. 

Sponge the butterflies in frame with Sunflower ink. Sponge the leaves with Vivid Chartreuse ink and then use Leaf Green as well. Sponge the florals with Pink Peony and then Vibrant Fuchsia. Use the pink Zig marker along with blender to brighten up the color on the petals. Use the light green marker and a light touch of the yellow on the leaves. Use a yellow sponge for thin application of the Crystal Lacquer over both floral frames. Add just a light touch of the Vivid Chartreuse over teal sentiment and the ‘Grateful’ diecut. Add a light touch of the Pink Peony over the florals in teal frame. Use the shaping stylus to shape the colored floral frames. 

Attach the sentiment and the word ‘Grateful’ onto inside of card under opening. Sponge the inside edges of card with Pink Peony ink. Now apply the Dries Clear glue onto yellow sponge and dab over top left and bottom right corners of card, then sprinkle with Crystal Clear glitter. Attach the floral frame around opening as shown using hot glue. Cut off sections of the remaining frame and attach onto the top left and bottom right corners as shown. Use the Dries Clear glue along with the Mustard glitter to add a touch of sparkle over the butterflies.

Other Products: Hot Glue, Hot Glue Gun, Dimensional Adhesive, Funnel Tray, Scissors, Paper Trimmer, Diecutting Machine

Instructions:

The ready side-fold slimline card from smooth cardstock measures 9 1/2″ by 4 1/2″. To prepare the card base, cut the paper measuring 9 1/2″ by 9 ” and score at 4 1/2″ on 9″ length and crease well. For the card front, choose the pattern paper from the Floral Sentiment Paper Collection and cut measuring 9″ by 4″. Layer the pattern paper on the card front using dimensional tape. 

To decorate the card front, choose the paper from the designer paper collection and cut a solid panel using the outermost die from the HCD3-7448 Slim Ornate Rectangle Die. Next, cut a lacy frame in Luxe Gold and white cardstocks using the same die set and glue them together keeping the white on top. Next, layer the fancy frame on the card panel as shown, using tiny glue dots. 

Stamp the floral sentiment image twice with black archival ink on smooth white cardstock using HCPC-31025 Grateful Floral Sentiment Cling Stamp Set. Cut one stamped image using the outermost die from its coordinating die set. Cut the frame of the second image and paint it using the Zig Clean Clear Markers. Once done with the painting, layer the painted image on the solid sentiment panel using foam dots. 

Cut 2 pieces of ornate tags in luxe gold cardstock using HCD1-7203 Ornamental Tags Die set and adhere them one each on the top and bottom of the prepared painted panel. Further, double-layer the panel in the center of the card as shown. 

For vellum butterflies, stamp the image twice using white pigment ink on Rajni Chawla's Vellum cardstock and sprinkle white heat embossing powder. Dust extras and heat set the images using a heat gun. Finish the card by adding vellum butterflies. 

Other Products: Smooth White Cardstock, Funnel Tray, Die Cutting Machine, Foam dots, Score Board, Hero Arts White Pigment Ink.

Instructions:

Cut a piece of white cardstock to 5.5 x 11.5", score at 5 3/4 and 8.5" and fold to get an easel base. Cut 4 pieces of paper from Floral Sentiments Paper Collection, one to 5 5/16 x 5 9/16" and 3 pieces to 5 5/16 x 2 9/16". Adhere them to the base. Cut out another piece of paper from Floral Sentiments Paper Collection to 4.5 x 2" and a little bigger piece of the white cardstock, it will be your stopper, adhere it at the big part of the card. Cut out a panel with die No. 2 from Eyelet Frame Gateway Die Set and Floral Sentiments Paper Collection. Cut out a white frame with die No. 3 and yellow panel with die No. 4 from the same die set. Adhere them as pictured. Stamp the sentiment with the Friend Floral Sentiment Cling Stamp Set in Vibrant Fuchsia ink and cut it out with coordinating die. Stamp the sentiment with the Friend Floral Sentiment Cling Stamp Set in Tuxedo Black ink, color it and cut it out with 2 coordinating dies. Adhere all elements to the top panel as pictured.

Stamp blossoms from the Iris Garden Petals Cling Stamp Set in Pink Peony ink onto Deluxe Flower Shaping Paper. Color their edges and their centers with the same ink, diecut with coordinating dies and shape with mold. Add Pastel Bead Medium stamens to all flowers. Stamp blossoms from Lush Lilac Stamp Set in Cactus Flower ink onto Deluxe Flower Shaping paper and diecut with coordinating die. Shape them with Deluxe Flower Shaping tools and add some Tu Tu Pink Prills. Stamp 2 branches from the Leafy Accents Cling Stamp Set in Fern Green ink, color them with the Leaf Green ink, cut out with coordinating dies and shape with coordinating molds. Stamp branches from the Iris Garden Accents Cling Stamp Set in Fern Green ink, color them with Leaf Green ink, cut out with coordinating dies. Stamp the sentiment with the Friend Floral Sentiment Cling Stamp Set in Vibrant Fuchsia ink and cut it out with coordinating die. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers and branches and add some pearls.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, colored pencils, pearls

Instructions:

Ready side fold card measures 5" ×7 ". Cut a mat from designer paper collection measuring 4.75" × 6.75". Adhere it on ready card base using adhesive. Cut a mat from designer paper and a mat from white cardstock using die from Royal Elegance Frames Die. Glue both together and adhere on card using adhesive. Cut a decorative frame from white cardstock using die from the same set. Adhere it on card using foam dots.

Stamp image from Special Floral Sentiment Stamp set on white cardstock using plum ink. Cut with coordinating die and slightly distress with buttercup ink, glue it on card using dimensional tape. Stamp another frame on watercolor paper using pebble beach Archival and paint it using zig markers. Cut with coordinating dies and adhere it on card using foam dots as pictured. Stamp frame again using leaf green ink and olive green ink on white cardstock. Die cut 'special' sentiment from it. Cut 5 more pieces from white cardstock. Glue all together to add dimension. Glue it on card as pictured.

Stamp small Wild Rose flower on Deluxe Flower Shaping paper using magenta hue ink and cut with coordinating die. Paint flowers using magenta hue and vibrant fuchsia ink, shape using small ball tool and add prills to the center of the flowers. Stamp classic rose leaves on deluxe flower shaping paper using fern green ink, paint using leaf green and fern green ink. Cut with coordinating dies and shape using stylus. Arrange flowers and leaves using hot glue as shown.

For finished look, apply Crystal Clear on flowers using Art Glitter Clear Dries adhesive.

Other Products: Smooth white cardstock, Watercolour Paper, Hot Glue

Instructions:

Prepare a card base 5 x 7" using the white Flower Shaping paper. Top with a piece of the Floral Sentiment paper trimmed slightly smaller. Use the Pilot Gold marker and highlight the edges. Place foam dots to the back and adhere to the card.

Die cut 2 of the Slim Line Rectangles out of the white card stock. Glitter and set aside. After it's dry, cut in half and adhere to the ends of the card as shown.

Stamp the sentiment from the Special Floral Sentiment set on white with the Vibrant Fuchsia ink, cut out with the coordinating die. Cut 5 more out and adhere all togeher making a chip board.  Add to the center of the card. Cut 2 of the Swirly border Accents die from white card stock, cut apart and adhere to the card.

Stamp the leafy accents on white with the Cottage Ivy, color with Vivid Chartreuse, cut out with the coordinating die. Highlight the edges with more of the Cottage Ivy ink. Place in the matching mold and run through the die cut machine to shape.

Stamp the Aster flowers on white with the Vibrant Fuchsia ink. Cut out with the coordinating die. Use the Golf tool to shape. Put 3 together of the large ones and 2 together of the smaller ones. This makes 3 flowers and 2 buds.  Adhere to the card on top of the leaves.

To finish, add prills to the center of the flowers and glitter to all the leaves and flowers.

Other Products: Paper trimmer, Die cut machine,

Instructions:

Cut piece of Deluxe Flower Shaping Paper 12” x 7”, score at 6” along the long side and fold to create a base card of 6” x 6”.  Cut a piece of pink pattern paper 5 7/8” x 5 7/8” and adhere to the front of the card base.  

Die cut four decorative edges from the HCD3-7442 Curvy Decorative Die - two from Deluxe Flower Shaping Paper and two from gold cardstock.  Adhere the white decorative edges to the gold decorative edges slightly offsetting the dies.  Adhere to the top and bottom of the card.  Die cut the panel out of Deluxe Flower Shaping Paper using the plain edge die from the HCD3-7442 Curvy Decorative Die and adhere to the front of the card using foam tape.  Die cut another panel from pattern paper using the plain edge die again and adhere to the front of the white panel.  Add Frosting Powder to the edges and card from with Dries Clear on a sponge.

To create the shaker element, cut a base from green pattern paper using the outer frame die from the HCD1-7460 Friend Floral Sentiment Die.  Stamp the floral frame from the HCPC-31024 Friend Floral Sentiment Cling Stamp Setin Jet Black ink on Iris cardstock.  Colour the image with Zig Clean Colour Brush Markers and die cut the frame using the No.1 and No. 2 dies from the coordinating die set.  Die cut another 4 frames using the inner and outer frame dies and stack together.  Adhere the stacked dies to the stamped base.  Add some sequins and Flower Pearls - Green, Pink, Hot Mama Prills,  to the middle of the frame.  Die cut a piece of clear cardstock using the outer frame die and adhere behind the painted image.  Adhere this to the front of the stacked dies to create the shaker element and adhere to the centre of the card as shown.

Stamp the sentiment from the HCPC-31024 Friend Floral Sentiment Cling Stamp Set in Picked Raspberry ink on Deluxe Flower Shaping Paper and die cut with the coordinating die.  Die cut another plain die and adhere the stamped image on top and then adhere to the centre of the frame as shown.

Stamp the leaves from the HCPC-3887 Wild Aster Cling Stamp set in Olive ink on Deluxe Flower Shaping Paper.  Colour the images with Leaf Green and Vivid Chartreuse ink and die cut with the coordinating die.  Colour the backs of the leaves with Vivid Chartreuse ink and shape using a golf tool.  Adhere the leaves to the bottom right and left as shown.  

Stamp the leaf filler image from the HCPC-31022 Iris Garden Accents Cling Stamp Set in Olive ink on Deluxe Flower Shaping Paper.  Colour the leaves with Leaf Green ink and die cut with the coordinating die.  Adhere around the other leaves.

Stamp the poppy images from the HCPC-3986 Wild Poppy Cling Stamp in Magenta Hue ink on Deluxe Flower Shaping Paper and die cut with the coordinating dies.  Colour the centres of the flowers with Sunflower ink and the petals with Rosey Posey, Cactus Flower and Plum inks.  Shape using the coordinating mold and assemble using two petals the same size.  Add a dollop of hot glue to the centres and Lettuce Entertain You and Lemon Chiffon Prills over this and then adhere over the leaves with a hot glue gun.

To finish, add Crystal Clear glitter to the flowers and leaves with clear gloss gel medium and a paintbrush.  Add Ultrafine Crystal glitter to the pink sentiment with Dries Clear glue.

Other Products: Iris Cardstock, clear gloss gel medium, paintbrush, Distress Oxide ink - Picked Raspberry, hot glue gun, Dress My Craft Sequins, Dress My Craft Flower Pearls - Green, Pink, Ranger Archival ink - Rosey Posey,

Instructions:

Its a ready folded card measuring 9 1/2" by 6". Cut panel on a Deluxe Flower Shaping paper measurng 9 1/4 by 5 3/4 and adhere it on the card base using dimensional tape. Cut another panel from Floral Sentiments Paper Collection measure 9 by 5 1/2 sheet number 3A, adhere this panel on the last panel using clear glue. 

Die cut the shapes of eyelet rectangles from eyelet rectangle die set using 2nd and 4th largest dies from the set on Deluxe paper, and die cut the shape rectangles from Slim Basic Rectagle Die Set using 2nd and 4th largest dies on designer paper and adhere these rectangles on the eyelet rectangle shapes using clear glue. Add these layers on the card base as shown using dimensional tape.

Stamp the image of sentiment from Special Floral Sentiment Cling Stamp Set 2x on the deluxe paper using Leaf Green and Vibrant Fuchsia ink and die cut the one image with green ink only with shadow die and other image with both coordinating dies, color this image using zig markers, shape other image a little bit from the back side using shaping kit, take out the flowers and sentiment from this frame and color edges with pink peony ink and add on the other image using hot glue. Apply clear glue randomly and sprinkle some baby's breath ultra fine glitter. Add this ready frame as shown using dimensional tape.

Stamp the images from Petite Feathery Florals Cling Stamp Set on the deluxe card using leaf green ink, die cut using coordinating dies and color it using Zig brush markers and mowed lawn ink using daubers. Shape from the back using shaping kit, apply clear glue using sponge and cover with Nida Tanweer Magic Glitter Powder. 

For the flowers, Stamp the clematis flower images using versamark Embossing ink cover the images with white embossing powder on deluxe paper heat it using heating tool die cut the images using coordinating dies, color the centers of clematis with Pink Peoney ink using daubers, use shaping stylus and dmc shaping tool to shape the petals from back. Use hot glue to assemble the flowers as shown. For the centers, add pearls using hot glue. Dab some Dries Clear glue onto a sponge, apply over the petals as desired, sprinkle with Nida Tanweer Glitter Powder and tap off.

Arrange all elements as shown using hot glue and embellish the card with Paper Magik Decorative Beads.

Other Products: Mowed Lawn Distress Ink, Versamark Embossing Ink, Hot Glue, Dimensional Tape, Nida Tanweer Magic Glitter, Paper Magik Decorative Beads, Pearls.

Instructions:

My finished card size is 5" x 7". Make card base using Deluxe Flower Shaping Paper. Cover with a piece of Sheet 3B of the paper collection. Die cut two of the Simply Classic Oval Frame Die and glue together. Add to card front using dimensional tape.  

Stamp the Special Floral Sentiment Cling stamp 2 times. Once in Leaf Green, once in Vibrant Fushia. Cut out using the coordinating dies. Color the green piece using Vivid Chartruese and add glitter using a mix of the two glitters. Set aside to dry. Color the flowers on the pink piece and then use a scissors to cut off the flowers. Glue them over the green piece and allow to dry. Glue the pink sentiment center to the green piece and then use the die to cut out a gold "Special" word and glue over the pink word.  

Stamp the little butterflies using Vibrant Fushia onto vellum and cut out using coordinating die. Cut out the little pink butterfly from where we stamped the pink piece and adhere the vellum butterfly to that. Glue onto the green stamped image.  

Adhere this piece to the card front using dimensional tape. The card is finished.  It's a quick and easy card that packs a punch!

Other Products: Die Cut Machine, White Cardstock, Dimensional Tape

Instructions:

Take a 6" square tent fold card blank, cover with pale pink paper cut to 5 3/4" square, from the Floral Sentiments Paper Collection. Adhere with Designer Dries Clear Adhesive. Cut the small cottage from the paper pad to 5 1/2" square. Adhere. 

Stamp onto Deluxe Flower Shaping Paper in Ranger Archival Coffee ink, four Grateful Floral Sentiments from the Grateful Floral Sentiments Cling Stamp Set. Stamp one Sentiment. Die cut two Grateful Floral Sentiments, using the outside edge of the matching dies. Die cut the other two pieces using the outside edge and inner edge dies, to make two frames. Color the edges of two Grateful Floral Sentiments solid pieces with Ranger Archival Pink Peony and Ranger Archival Leaf Green inks. Adhere together, adhere to the front of the card slightly towards the right-hand side using foam tape. Die cut the small cottage from the paper collection, outer edge only, using the same die set, adhere.

Color the two frames with Zig Clean Color Real Brush Markers and a water brush. Use Deep Green, Pale Green and May Green for the leaves. Use Almond Pink for the flowers. Use Yellow and Bright Yellow for the butterflies. 

Die cut two Grateful Floral Sentiments from Clear Cardstock, using the outside edge only. Adhere foam tape around one Clear Cardstock die-cut. Add an assortment of beads and sequins, remove foam tape and apply the other layer of Clear Cardstock on top. Trim any excess clear cardstock with scissors. Adhere to the front of the card. Adhere a colored frame to this. Cut up the other frame into small segments, adhere the pieces to the frame to hide any foam tape that might be showing. Adhere a hand cut corner piece to the front of the card. Hand cut the butterflies and Sentiment. Adhere to front of card. Sponge Dries Clear Adhesive to the card, add clear glitter. All done.

Other Products: 6' x 6" card blank, foam tape, Sizzix beads and sequins, clear glitter.

Instructions:

Make a 6" by 6" square card base using white card stock. Cut a mat layer from pattern paper and add to the card front. Cut a piece of pink card stock smaller than the first mat layer and add to the card.

Cut a piece of gold die cut from Slim Ornate Rectangle die. Trim the size and add to the base of the card.

Stamp image from the Grateful Floral Sentiment stamp set on Deluxe Flower Shaping paper with black ink. Colour with zig markers and cut with the matching die. Remove the centre sentiment part with the inner die. Score a piece of white card stock at 1/8" interval on the scoring board. Cut this piece to the size of the floral sentiment image. Use daubers to add shading with the help of plum ink. Cut a piece of vellum paper and add to the base on the die cut. 

Stamp a sentiment from the Special Floral Sentiment stamp set and die cut.

Cut two tags and add to the card.

Stamp  the flowers in vibrant Fuschia ink from the small wild Rose stamp set on Deluxe  Flower Shaping paper. Shade  the flowers with the same ink using Daubers and cut with the matching die.  Shape the flowers in the 3D flower shaping mold. Layer your four flowers together to form a single flower.

Make leaves using the leafy accents stamp and die set. 

Add these on the frame to finish the card. 

Other Products: Scoring board, die cutting machine. Hot glue gun

Instructions:

Cardstock size 7.5” x 12”. On 12” side score at 3”, 4.5”, 7.5”, 9”. Take pattern paper from HCDP1-2151 Floral Sentiments Paper Collection, cut them in strips size 2.875” x 7.375 (3strips), 1.375” x 7.375” (2 strips).

Cut two dies from HCD3 7442 Curvy Decorative Border Die on luxe gold cardstock and adhere them on left and right side as shown using designer dries clear adhesive.

Stamp image from HCPC 31024 Friend Floral Sentiment Cling Stamp set using archival ink-Jet Black on white cardstock and  with archival ink-mulberry on pattern paper from the collection and cut it with coordinating HCD1 7459 Special Floral Sentiment Die. Color it with Zig markers, as shown. Create shaker by cutting four layers of dies, add prills and cover with clear cardstock and on top of clear cardstock adhere stamped image.

Using same stamp on white cardstock using archival ink-vibrant fuchsia, cut it with coordinating die and add crystal clear glitter and adhere it with foam tape as shown. It can be displayed on table.

Other Products: Big Shot Plus Machine.

Instructions:

Card size:  3 1/2 x 8 1/4". Cut white cardstock to be 7 x 8 1/4", fold to make a 3 1/2" x 8 1/4" card. Cut yellow decorative paper to fit front and another slightly smaller to fit inside card. Cut the Slim Lattice Oval die from white and from Gold, glue together slightly off-set then pop up onto card front.

Stamp the Special Floral Sentiment onto white using black and then again using Lighthouse ink. Die cut both. Color the outside floral frame with alcohol ink pens, pop up onto card. Pop up Lighthouse ink sentiment to the inside of frame (optional, tape frame and sentiment together on the back first before popping up). Glitter flowers and butterfly.

Stamp smallest poppies enough for 4-5 flowers 2 blossoms each using Lighthouse ink onto Deluxe Flower Shaping Paper, sponge blossoms, die cut then sponge edges, form in mold. Glue 2 blossoms together for each flower (hot glue used for sample). Use Deluxe Flower Shaping Kit to finish shaping, pierce then glue in 1 green stamen.  Fill center with yellow Prills around green stamen. Glitter flowers.Stamp leaves using Fern Green, sponge with Leaf Green, die cut then form in the mold.

Arrange flowers and leaves onto the card front as desired then glue with hot glue.

Other Products: White cardstock, Copic Markers: R43, R24, R39, Y15, Y11, Y35, YG03, YG23, YG17, hot glue

Instructions:

Completed top fold card measures 5” x 7”. Cut one piece of white card stock measuring 5” x 7”, and a second piece measuring 5 x 7 1/2". Score the larger piece of card stock at 1/2" and adhere two pieces of white card stock together to create top fold card base. 

Create first matting layer using the reddish hued decorative paper from the Floral Sentiments Paper Collection. Adhere to card base. Next, cut a mat from white card stock measuring 4 3/4” x 6 3/4”, along with a slightly smaller decorative patterned paper from the Floral Sentiments Paper Collection that coordinates with the dark reddish color. Adhere the two matting pieces together with Dries Clear Adhesive, and then apply dimensional foam tape to back and set aside.  

Using the Slim Lattice Oval Die, cut one decorative die cut from white card stock. The die cut will be longer than the second matted portion of the card base, and will need to be trimmed down. To do this, position die cut so that the oval portion is in the center of the second matted portion of the card. Apply Dries Clear Adhesive to die cut, being careful not to go fully to the ends of the die cut as they will overhang. Once decorative die cut has been adhered, trim overhang portions and make sure edges are all securely adhered to the card. Peel dimensional foam tape and adhere second matted section to card base.

Stamp one inking of the Special Floral Sentiments Cling Stamp Set onto white Bristol 
Smooth marker paper using Ranger Archival Jet Black Ink. Color using Zig Markers or coloring medium of your choice. Die cut frame using both sections of the Special Floral Sentiments Die. 

Next, die cut the one or two of the same frame as above, without stamping the image, and layer them together behind the colored frame using Dries Clear Adhesive. Set aside.

Stamp another inking of the Special Floral Sentiments Cling Stamp Set onto white Bristol Smooth marker paper using Ranger Archival Jet Black Ink. Once again, color using Zig Markers or coloring medium of your choice. Snip apart floral clusters, shape using Deluxe Flower Shaping Kit, and set aside. 

Stamp one inking of the Special Floral Sentiments Cling Stamp Set onto white card stock (not Bristol Smooth marker paper) using Ranger Archival Jet Black Ink. Using just the outer portion of the coordinating die, die cut the stamped image. Adhere to center of card base using dimensional foam tape.  Adhere layered frame overtop of sentiment just added to card front using Dries Clear Adhesive. 

Next, to give the floral frame some interest and dimension, take shaped flower sections and adhere to card front using Designer Dries Clear Adhesive as shown. 

Lastly, using a piece of Hydra Sponge apply a small amount of Dries Clear Adhesive to floral frame and sprinkle with Crystal Ultrafine Transparent Glitter.

Other Products: Acrylic stamp blocks, white Bristol Smooth marker paper, die cutting machine, funnel tray, dimensional foam tape, scissors, paper trimmer

Instructions:

Score a 11" x 4 1/4" piece of Deluxe Flower Shaping paper at 5 1/2" and fold at the score line to create a 4 1/4" x 5 1/2" card base. Emboss the front of the cardbase using Altenew Broken Chevrons Stencil and Spellbinders Tan Embossing Mat. 

Stamp the image from Grateful Floral Sentiments Cling Stamp set on a piece of Deluxe Flower Shaping paper using  Versamark ink and heat emboss it using Ranger Platinum embossing powder and heat tool. Die cut this imge using the matching die from Grateful Floral Sentiments die. Adhere it on the cardbase using foam tape.

Other Products: Versamark ink, Ranger Platinum embossing powder, Altenew Broken Chevrons Stencil, Spellbinders Tan Embossing Mat and double sided foam tape.

Instructions:

Create base using outside Fancy Classic Rectangle Frame Die cut two pieces from white cardstock, glue it together on the top, using frame die cut from paper collection and place into card using Foam Strips for dimension. Cut frame from silver paper and place onto the card using adhesive foam strips. Cut out the smaller frame from paper collection and silver paper. Place on the top of card using adhesive foam strips.

Stamp Grateful Floral Sentiment Cling Stamp Set on the white paper using Ranger Archival Ink Pad - Jet Black and cut using the coordinating dies. Sprinkle Circa Embossing Powder - Iridescent and melt using heat tool. Shadow background sentiment using pencils. Colour with pencils. Place onto the card using adhesive foam strips.

Other Products: Circa Embossing Powder - Iridescent, Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine, pencils

Instructions:

Cut a piece of white cardstock, score and fold to get a 8 1/4 x 5 3/4" base. Cut a piece of paper from Floral Sentiments Paper Collection to 8 x 5.5", the other one to 7 7/16 x 4 15/16" and a little bigger piece of the white cardstock. Cut out a white and a silver frame with die No. 1 from the Rectangle Filigree Frame Die Set. Cut out a green panel with the same die from the Floral Sentiments Paper Collection. Stamp the urn with Large Floral Urn Cling Stamp Set in Toffee Crunch ink, color it and diecut with coordinating die. Stamp the sentiment from Friend Floral Sentiment Cling Stamp Set  in Majestic Violet ink and diecut with coordinating die. Adhere all elements to the base.

Stamp blossoms from the Iris Garden Petals Cling Stamp Set in Majestic Violet ink onto Deluxe Flower Shaping Paper. Color their edges with the Cactus Flower ink and their centers with the Sunflower ink, diecut with coordinating dies and shape with mold. Add Pastel Bead Medium stamens to all flowers. Stamp blossoms from Lush Lilac Stamp Set in Majestic Violet and Cactus Flower inks onto Deluxe Flower Shaping paper and diecut with coordinating die. Shape them with Deluxe Flower Shaping tools and add some Go Man Go Prills. Stamp 5 branches from the Leafy Accents Cling Stamp Set in Fern Green ink, color them with the Leaf Green ink, cut out with coordinating dies and shape with coordinating molds. Stamp branches from the Iris Garden Accents Cling Stamp Set in Fern Green and Cactus Flower inks, color them with Leaf Green and Cactus Flower inks, cut out with coordinating dies. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers and branches and add some pearls.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, colored pencils, pearls, sisal

Instructions:

Dutch Door fun fold card size is 5 x 7”. Cut Gorgeous Grape cardstock to 10 x 7”. Use a paper trimmer to trim a 5 x 3” piece off of the top right and save for another project. Score and fold the remaining cardstock at 5” on the long side to create the Dutch door fold card base, Cut Highland Heather cardstock 4 3/4 x 6 3/4” and white cardstock 4 1/2 x 6 1/2”. Stamp the ‘In Appreciation’ sentiment from the Grateful Floral Sentiment Cling Stamp set on the white card stock using Highland Heather and Gorgeous Grape inks. Tip: Cover the word ‘Appreciation’ with a post-it note, ink the word ‘In’, remove the post-it and stamp on the top center about 3/4” down. Clean the stamp and this time cover the word ‘In’ with the post-it note, ink ‘Appreciation’, remove the post-it and stamp underneath ‘In’. This way you won’t have to cut the stamp to use the words individually. Stamp a butterfly from the Small Floral Butterfly Cling Stamp set at the bottom right using Highland Heather ink and adhere the white cardstock to the Highland Heather cardstock and adhere to the inside of the card. Cut Highland Heather cardstock 3 3/4 x 4 3/4” and Decorative Dragonfly paper sheet 10A, ink the edges of the designer paper with Highland Heather ink, adhere together and adhere to the card front using dries clear adhesive. Cut Gorgeous Grape cardstock 4 x 5 1/2”, Highland Heather cardstock 3 3/4 x 5 1/4” and white cardstock 3 1/2 x 5”. Dry emboss the white cardstock using a textured embossing folder and adhere the three layers together using dries clear adhesive. Center the stack on the card and add dries clear adhesive just to the bottom section then adhere to the card front.

Stamp the Grateful Floral Sentiment 3x on white cardstock, twice using Highland Heather ink and once using Soft Succulent ink. Diecut the Soft Succulent image using the largest die from the set. Diecut the Highland Heather image using the largest die and the inside die. Diecut the word ‘Grateful’ from the other heather image using the coordinating die, cut two more times from white cardstock, adhere all diecuts together with the stamped one on top and adhere to the green diecut. Color the heather frame using Stampin’ Blends markers and gently shape using the Deluxe Flower Shaping kit.

Sponge both images using dries clear adhesive and sprinkle with Rajni Chawla’s Crystal Clear glitter. Adhere the heather image to the green image using dimensional squares and then adhere to the card front using the dimensional squares and dries clear adhesive. Add three Swarovski crystals to the top right using dries clear adhesive and the QuickStik Craft tool.  

Other Products: Diecutting Machine, Paper Trimmer, Cardstocks – White, Highland Heather and Gorgeous Grape, Inks – Highland Heather, Gorgeous Grape and Soft Succulent, Stampin’ Blends Markers – Light Highland Heather, Light Gorgeous Grape, Light and Dark Soft Succulent and Light Polished Pink, Misti, Funnel Tray, Swarovski Crystals, Embossing Folder, Dimensional Squares

Instructions:

Cut out a 5 1/2" x 7 1/4" base from white paper, then cut a slightly smaller rectangle from the silver paper and glue it to the base. Cut a 5" x 7" rectangle from the green paper from the collection. Then cut a 4 1/2 x 6 1/2" rectangle out of white paper and glue it to the card. Cut out a slightly smaller rectangle from the silver paper and then cut out a 4 1/4" x 6 1/4" rectangle from the paper from the collection and glue it to the card with Double Dots 100pc. -3D Foam Circles.

Stamp the Friend Floral Sentiment set on silver paper with embossing ink, cover with white embossing powder, heat it with the embossing heater. Then cut with coordinating die die. Cover the flowers with pink and yellow ink and the leaves with green ink.

Glue as shown.

Other Products: Die cutting machine, Embossing Powder Seafoam White, embossing Stamp Pad

Instructions:

Cut a piece of white card stock to 10” x 7” and score in half at 5” to form a 5” x 7” card base. Cut a piece from sheet 10B from the HCDP1-2151 Floral Sentiments Paper Collection, measuring 5” x 7” and glue this to the card base. Now from Luxe Gold Card Stock cut a piece that measures 4 7/8” x 6 7/8” and glue to the card front. Then cut a piece from sheet 9B measuring 4 3/4” x 6 3/4” and adhere it to the card front. Next, use the 2nd largest die from HCD2-7426 Oval Filigree Die Set and cut a piece from 7B. Adhere this to the center of the card. Using the same die set cut the 3rd largest die from both white card stock as well as Luxe Gold Card Stock. Layer these so that the white is on top and glue together so that the gold is just slightly offset behind the white. Now cut a smaller oval layer from the die set using a piece from sheet 6B and glue to the center of this filigree oval. Attach this decorative oval to the card base using 3D foam tape. From this same die set cut the corner dies 4x in white and 4x in gold and glue in the same fashion as described above. Glue into the corners. 

Using the HCPC-31023 Special Floral Sentiment Cling Stamp Set and a Stamp Positioner tool, stamp the large floral sentiment onto Rajni Chawla’s Vellum using Versacolor white ink and white embossing powder. Turn the image over and using Zig Clean Color Real Brush Markers color in the back of the images. Die cut with the coordinating dies making sure to use the inside die. Keeping the placement of the dies taped together, die cut another piece from white card stock. Glue this using Dries Clear adhesive to the back of the vellum. Snip the floral frame apart and arrange around the oval frame. Adhere using foam dots. Add a butterfly fussy cut from the frame as well as some gems for the flower centers.

Now stamp the sentiment from the HCPC-31024 Friend Floral Sentiment Cling Stamp Set and stamp using Vermillion Archival Ink onto white card stock. Die cut out using the coordinating die. Glue into the center of the card to complete the front. For the inside simply finish it by adding a piece of paper from the beautiful Floral Sentiments Paper Collection.

Other Products: 3D Foam Tape, Stamp Positioner Tool, Scissors, Paper Trimmer, Die Cut Machine

Instructions:

Create a 6 x 6 inch card base in white cardstock.  Cut a 5.5 x 5.5 piece of green paper from the Floral Sentiments Paper Collection, distress with Vivid Chartreuse.

Cut out the Elegant Hearts Centerpiece Die in yellow designer paper and Gold Luxe Cardstock, adhere offset to create shadow and adhere to card front.

Stamp the frame from the Grateful Floral Sentiment Cling Stamp Set in Jet black, cut out with coordinating die and sponge with Sunflower, Magenta Hue, Bright Tangelo and Vivid Chartreuse. Cut out with coordinating dies and add glitter. Cut out the same frame in Gold Luxe Cardstock, adhere offset with foam tape as shown.  Fill in the words in the sentiment with markers and adhere left of center, adhere frame on top with foam tape.

Stamp the Classic Rose Cling Stamp Set in Coastal Coral, cut out with coordinating dies, sponge with same and sculpt with the 3D Rose Shaping Mold, add glitter. Stamp the leaves from the Leafy Accents Cling Stamp Set in Olive, cut out with coordinating die and sponge with Vivid Chartreuse. Sculpt with Leafy Accents Shaping Mold.

Adhere leaves and flowers as pictured.  

Other Products: White cardstock, pink marker

Instructions:

Cut one of the 4” x  5.25” panels from the paper collection and adhere to a slightly larger white card base. Die cut 2 x Delicate Daisy corners using luxe gold card and adhere to the card base as shown.

Stamp the Friend Floral frame onto pale green paper from the collection using rose bud ink. Die cut using both the outer and inner die. Die cut a for a second time using white card, adhere the 2 pieces together and colour the flowers lightly using rhubarb ink and the leaves with olive grove. Colour the centre of the flowers with a copic marker and add a little definition using a black fine liner. Adhere to the centre of the card.

Stamp the grateful “in appreciation” sentiment in black onto white card. Die cut and adhere to the card front.

Other Products: White card

Instructions:

Create a top fold card measuring 6 1/2” x 6 1/2”.  Choose a designer paper from Iris Garden Paper Collection and cut it to the size 6 1/4” x 6 1/4”. Choose another designer paper from the same Paper Collection and cut it to the size 6” x 6”. Now, mat this paper on Luxe Gold Card stock making a delicate border of 1/16” on all four sides. Adhere this panel on ready card base using tacky glue.

Cut decorative die cuts from white card-stock and Luxe Gold card-stock using Lattice Flourish Gateway Die and a swirl die from Cut Mat Create 2A. Stack these white and gold die cuts together, slightly offset. Make the gateway die cuts short by using scissors. Adhere these die cuts to the ready card base as shown.

Stamp the flowers and leaves from the Iris Garden Petals Cling stamp set on Deluxe flower shaping paper using Coastal Coral archival ink for flowers and Fern Green archival ink for leaves. Now color the flowers by using Vivid Chartreuse archival ink in the center and  Lady Bug Memento ink on the petals. Color the leaves using Fern Green and Leaf Green archival ink. Cut the flowers and leaves using their coordinating dies and shape them using the coordinating 3D shaping mold. Now add yellow glitter to the centre of flowers.

Stamp the leaves from Leafy Accents  Cling stamp set on Deluxe Flower Shaping paper with Olive Archival  ink and color them using Olive Archival ink and Vivid Chartreuse Archival ink. Cut the leaves using their coordinating dies and shape them using coordinating 3D shaping mold.

Choose and stamp the images from Iris Garden Accents Cling Stamp Set on a smooth watercolour paper using Fern Green Archival ink and Rich Cocoa Memento ink. Paint all the images using Zig Clean Clear Brush Markers. Cut all the images using their coordinating dies.

Stamp the birds images from the Clematis Birdhouse & Trellis Cling Stamp Set in Jet Black ink on smooth white card stock. Colour with Zig Clean Colour Brush Markers and copic markers and die cut with the coordinating die.

Once all the elements are ready, assemble all the ready elements  as shown and finish the card using a sentiment from Celebrate Love Sentiments Cling Stamp Set. For final look add crystal clear powder to flowers and leaves using Art glitter dries clear glue.

Other Products: Die Cutting Machine, Score Board, Bone Folder, Smooth White Cardstock, Scissors, double sided foam tape.

Instructions:

This side fold card measures 6 inches by 6 inches. To create a card base - cut out a 12” x 6” piece of White cardstock and score it at 6” (long side up). Fold using a bone folder along the score lines, then die cut it using the largest die of HCD1-7367 Simple Centerpiece Die. Using the same die to cut a pink paper #10B fromFloral Sentiment Collection, ink the edge with coastal coral ink and adhere it to the card front.

Die cut shape in white cardstock with HCD1-7369 Elegant Hearts Centerpiece Die, then adhere it to the card. Make a line of white glue on this die and put art glitter lichen on it. 

Stamp the sentiment from Special floral sentiment onto a piece of watercolor paper using leaf green ink. Color with zig markers and add white glue and art glitter lichen on the leaves. Add crystal clear powder on your butterfly. Glue on your card with 3D foam.

Stamp the word Grateful in green leaf and die cut three times with the coordinating die. Glue it on each other and add 3d crystal clear. 

Stamp, cut and color in olive green leaves from Iris garden accent and glue it under the sentiment.

Other Products: Die cutting machine cut-n boss, scissors, water mister, hot glue gun, watercolor paper,