Instructions:

Card size is 5 x 7 3/16”. Cut Flower Shaping paper to 10 x 7 3/16”, score at 5”. Place Noel Decorative outline die onto card front, tape to secure Carefully diecut card front, being sure the cutting board doesn’t cover the back cut blade of die, creating a shaped card front. Cut blue paper from Joyous Noel Paper collection to 4 13/16 x 7”, ink the edges with Night Sky ink and adhere on inside of card base. Cut another sheet from paper collection to 4 3/8 x 6 5/8” then stamp Joyous Noel Background stamp onto it using Encore Gold ink and emboss with Antique Linen embossing powder. Heat set then ink edges with Periwinkle and Deep Purple ink and adhere on inside of card base.

Diecut Noel Decorative outline die from blue paper from collection, ink edges with Deep Purple ink and adhere onto card front. Die cut a second one from Flower Shaping paper and adhere slightly offset showing a small blue border. Diecut Noel Decorative die from flower shaping paper and yellow paper from paper collection, adhere together, offsetting slightly. Use hydra sponge to randomly dab Dries Clear glue onto decorative die, sprinkle with Bridal Embossing Powder, tap off and heat set. Cut a small piece of cheesecloth, place onto card front, then adhere white decorative die on top.

Use white cardstock to stamp the angel images. Use Periwinkle, Deep Purple and Night Sky to stamp the 2 angel stamps from Starry Noel Angel in the corner of your sheet of white cardstock aligning the acrylic block with the corner of your cardstock. Clean your stamp without removing it from the acrylic block and this time use VersaMark ink (clear ink). Stamp it directly on top of the colored ink angel, carefully aligning the acrylic block again with the corner of your paper. After stamping clear ink onto the angels, sprinkle Bridal embossing powder on top, tap off and heat set. This creates a pretty glittery muted angel, diecut. Stamp a third angel onto white cardstock using Encore Gold ink and Antique Linen embossing powder, diecut stars using coordinating die.

Shape angels gently using your fingers and adhere onto card front using dries clear glue and foam adhesive. Layer the gold stars on top of angel. Cut green sentiment strip from paper collection, carefully wrap around styles for a curled effect, then adhere onto card front.

Other Products: Antique Linen Embossing Powder, VersaMark ink, Cheesecloth, Scissors, Paper Trimmer, Diecutting Machine.

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 12” x 7”, score at 6” along the long side and fold to create a base card of 6” x 7”. Cut a piece of silver cardstock 6” x 7” and adhere to front of the card. Cut a piece of dark blue cardstock 5 7/8” x 6 7/8 and adhere to the front of the silver cardstock.

Die cut two outer frames from the HCD1-7416 Noel Decorative Die out of light blue pattern paper. Adhere to the front  of the card as shown. Die cut 4 decorative dies from the HCD1-7416 Noel Decorative Die – two from Deluxe Flower Shaping Paper and two from silver cardstock. Adhere the white dies over the silver dies slightly offsetting the silver. Adhere over the background as shown. Cut a piece of silver cardstock 1/2" x 7 and adhere to the centre of the card hiding the join. Cut a piece of dark blue pattern paper 3/4” x 7” and adhere over the silver band. Die cut the shaped eyelet tag from the HCD1-7202 Album Tags and Accents die and adhere to the centre of the band. Die cut the inner die out of green pattern paper using the plain inner tag die from the HCD1-7202 and adhere over the silver eyelet tag. Stamp the sentiment from the HCPC-3997 Starry Noel Angel Cling Stamp Set in Night Sky ink on Deluxe Flower Shaping Paper. Colour the berries and holly with Zig Clean Colour Real Brush Markers and die cut with the coordinating die. Adhere to the centre of the tag.

Stamp the angel and harp from the HCPC-3996 Joyous Noel Angel Cling Stamp Set in Black Onyx ink on Iris cardstock. Colour with Zig Clean Colour Real Brush Markers and die cut with the coordinating dies. Adhere the angel to the top left of the tag and the harp to the bottom right of the tag as shown.

Stamp the large and small spray images from the HCPC-3959 Holly Berry Spray Cling Stamp Set in English Ivy on Deluxe Flower Shaping Paper. Colour the leaves with Leaf Green ink and die cut with the coordinating dies. Add Crystal Clear glitter to the leaves with clear gloss gel medium and a paintbrush. Adhere a large and small spray to the  bottom left of the card.  Stamp the small leaf spray using English Ivy on Deluxe Flower Shaping Paper and die cut with the coordinating die. 

Stamp the small flower images from the HCPC-3957 Large Festive Poinsettia Cling Stamp and the small flowers from the HCC-3959 Small Festive Poinsettia Cling Stamp set in Paris Dusk ink on Deluxe Flower Shaping Paper. Colour the images with Periwinkle and Paris Dusk inks and die cut with the coordinating dies. Colour the backs of the petals with Periwinkle in and then shape using the coordinating mold and assemble with two of each size petal. Pierce the centres of the flowers and insert the silver pearl stamens and secure them with Dries Clear glue. Add Crystal Clear glitter using clear gloss gel medium and a paintbrush. Trim the stamen threads and adhere over the holly sprays on the bottom left as shown.

To finish add clear iridescent gems to the decorative background die and on the tag.

Other Products: Iris cardstock, clear gloss gel medium, paintbrush, iridescent gems, Versafine Onyx Black ink, foam tape

Instructions:

Create a 5.5 x 7" card base with white cardstock. Cut a 5 x 6.5" piece of blue paper from the Joyous Noel Paper Collection, distress with Night Sky and adhere. Cut the Noel Decorative Die 2x in white cardstock and adhere.

Stamp the angel, noel and harp from the Joyous Noel Cling Stamp Set in embossing ink on white cardstock, heat emboss with black embossing powder, cut out with coordinating die, color with Zig Markers, add glitter and adhere with foam tape as shown.

Stamp the small poinsettia from the Large Festive Poinsettia Cling Stamp Set in Sky Blue, sponge with same, cut out with coordinating dies and sculpt with the Large 3D Festive Poinsettia Shaping Mold. Add silver stamens and glitter.

Stamp the holly from the Small Festive Poinsettia Cling Stamp Set in Olive, sponge with Vivid Chartreuse, cut out with coordinating dies and sculpt with the Small 3D Festive Poinsettia Shaping Mold. Add glitter.

Stamp the leaves and flourishes from the Holly Berry Cling Stamp Set in Olive, cut out with coordinating dies, sculpt with stylus and add glitter.

Stamp the flowers from the Cottage Garden Hydrangea Cling Stamp Set in Vivid Chartreuse, sponge with same, cut out with coordinating dies and sculpt with 3D Hydrangea Shaping Mold. Add stamen and glitter.

Adhere flowers and foliage as pictured.

Other Products: White Cardstock, embossing ink, black embossing powder, gold embossing powder, foam tape, Memento Dye Ink - Pistachio

Instructions:

Cut out the white base of the card and fold it to 7 1/2" x 5 1/2". Cut a slightly smaller rectangle from the paper collection and glue to the base. Cut a 6 3/4 "x 4 3/4" rectangle from the silver paper. Cut a 6 1/4 "x 4 1/4" rectangle from the paper collection, then stamp with black ink the Joyous Noel Background and adhere with Double Dots 100 pc. -3D Foam Circles.

Stamp a Large Holiday Star with blue ink on white papers and collection paper . Cut with the coordinating die. Cut the largest element from silver paper of the same set and adhere it underneath so that it protrudes a little and adhere to card front with Double Dots 100 pc. -3D Foam Circles as shown. Cover with glue and glitter.

Other Products: Cutting machine

Instructions:

Card size is 5” x 7”. Take pattern paper from the HCDP1-2142 Joyous Noel Paper Collection, tear the edges and adhere it on card base using designers dries clear adhesive.

Cut one outer die from HCD2-7382 Simply Classic Oval Frame Die on luxe gold cardstock and adhere it using foam tape, cut next layer of die on white cardstock, add crystal clear glitter on edge and adhere this on gold cardstock using designer dries clear adhesive. Stamp some star images using HCPC-3997 Starry Noel Angel Cling Stamp using Encore Ultimate Metallic Ink Pad-Gold, as shown.

Cut one eyelet circle die from HCD1-7154 Eyelet Circle & Basics Small Die on white cardstock, and stamp background image from HCPC-3998 Joyous Noel Background Cling Stamp on white cardstock using archival ink-goldenrod and night sky, adhere it using foam tape.

Using Misti, Stamp angel image from HCPC-3997 Starry Noel Angel Cling Stamp set using archival ink-Night sky, and then use versamark ink on stamp and then add embossing powder-gold, heat it  cut it with coordinating HCD1-7415 Starry Noel Angel Die, adhere it using foam tape.

Stamp one Noel image from HCPC-3997 Starry Noel Angel Cling Stamp Set on white cardstock using archival ink-Night Sky, cut it with coordinating die and adhere it using designer dries clear adhesive as pictured.

Other Products: Big shot plus machine, versamark Pad

Instructions:

Card size is 5 1/4 x 6 1/2”. Cut Flower Shaping Paper to 10 1/2 x 6 1/2”, score and fold at 5 1/4”. Cut green paper from Joyous Noel Paper Collection to 5 1/4 x 6 1/2”, ink edges with Olive ink and adhere onto card front.Cut flower Shaping Paper to 5 x 6 3/16” and adhere onto card base. Cut light green paper from paper collection to 4 11/16 x 5 15/16”, then use Periwinkle and Deep Purple to stamp Joyous Noel Background stamp. From the Circles Basics Large die set, diecut two circle openings in stamped panel using 3rd largest and 5th largest circle dies. Adhere onto card base using foam adhesive.

Use the dies from Eyelet Circle & Basics Small die set to die cut the 2nd and 4th largest plain circle dies from both Flower Shaping paper and yellow paper from paper collection. Once these circles are cut, use the two circle dies from the large circle set you’ve previously used to diecut, creating a narrow circle frame. Adhere the yellow circle frame behind the Flower Shaping circle frames, offsetting slightly, then adhere onto card base as shown. Cut a small piece of cheesecloth to place inside the larger circle opening.

Stamp angel from Joyous Noel Angel stamp set onto white cardstock using Night Sky ink, Stamp harp with Encore Gold ink, then emboss with Antique Linen embossing powder, heat set. Stamp Noel sentiment from Starry Noel Angel die using both Periwinkle and Night Sky ink for an ombre effect. Diecut images with coordinating dies, diecutting an additional 3 sentiments for durability.

Color the images with the stack and store daubers. Color the Angel with Stary Night, Periwinkle, Deep Purple, Vivid Chartreuse and Encore Gold ink. Give the sentiment a touch of Vivid Chartreuse on the leaves and a very light touch of Deep Purple on sentiment., Adhere all the sentiment layers together for a thicker piece. Use Hydra sponge to apply Crystal Lacquer onto angel and sentiment, allow to dry. Shape images lightly with your fingers then also the shaping stylus on the angel.

Adhere images onto card base as shown, adhering with foam adhesive and dries clear glue. Cut a small sentiment strip from paper collection, wrap around stylus handle for a curled effect, then adhere onto card base. For a finishing touch, apply Dries Clear glue onto card as desired, apply Crystal Glitter, tap off and allow to dry.

Other Products: Antique Linen Embossing Powder, Cheesecloth, Scissors, Paper Trimmer, Diecutting Machine.

Instructions:

The card base is 5 x 7" from white cardstock. Die cut the 2 largest layers of the Elaborate Oval die from white cardstock. Adhere these layers together using foam tape and then adhere to the card base also using foam tape. Die cut the middle section of the die from Luxe Silver Cardstock, and then the middle decorative die from white cardstock. Stamp the sentiment onto the middle decorative piece using grey ink (Archival- Shadow Grey). Adhere this to the silver cardstock layer and add to the middle of the card using foam squares.

Stamp the Clematis flowers using an embossing pad and white embossing powder and heat set. Die cut and shape the flowers using the coordinating 3D Shaping Mold. Add Crystal Clear Glitter to the flowers and let dry. Next, add Dew Drops to the middle of the smaller flowers and the large pearl in the middle of the larger flower. Once dry, add the flowers around the middle sentiment of the card.

The final touch is a few white enamel dots around the die cut pieces and the card background. 

Other Products: Cardstock- White, Embossing Pad, White Embossing Powder, Dew Drops, Pearls, White Enamel Dots, Archival Ink- Shadow Grey, Scrapbook Adhesives by 3L (Crafty Foam Tape, Adhesive Dots Small, E-Z Runner Ultra, Dual Tip Glue Pen)

Instructions:

Create a 5 11/16 " square card base. Cut a piece of blue paper from the Joyous Noel Paper Collection to 5.5 x 5.5", another one to 5 1/4 x 5 1/8" and a little bigger piece of the white cardstock. Adhere them to the base. Cut out a white and a silver frame with die No. 1 from the Lacy Diamond Die set, the blue panel with die No. 3 from the same set, adhere them together and to the base.

Stamp the sentiment from the Starry Noel Angel Cling Stamp Set in Magenta Hue ink, cut it out. Stamp the angel with the Joyous Noel Angel Cling Stamp Set in French Ultramarine and Magenta Hue inks and cut out with coordinating dies. Adhere all elements as pictured.

Stamp blossoms from the Small Festive Poinsettia Cling Stamp Set and the Large Festive Poinsettia Cling Stamp Set in French Ultramarine and Magenta Hue inks onto Deluxe Flower Shaping Paper, color their centers with the same inks, diecut with coordinating dies and shape with molds. Add Pastel Bead Medium Stamens to all flowers. Stamp 6 holly leaf clusters from the Winter Wreath Accents Cling Stamp Set in Fern Green ink, color them with Leaf Green ink and cut out with coordinating die. Stamp 2 small branches from the Holly Berry Spray Cling Stamp Set in French Ultramarine ink onto Deluxe Flower Shaping Paper, diecut with coordinating die. Stamp 3 pomegranate branches from the Winter Wreath Accents Cling Stamp Set in Frost White ink onto Vellum paper, use Opaque Embossing Powder, then heat emboss them and diecut with coordinating dies. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers, add some self-adhesive pearls and styrofoam balls.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, heat tool, white cardstock, sisal, self-adhesive pearls, styrofoam balls

Instructions:

Card size: 5 x 5 3/4". Fold 4 x 11" white cardstock then place large Mushroom die on so that the top of the die overhangs the fold by about 1/4" then cut. Stamp using black and cut another full mushroom front and glue it to the folded card. Stamp using black and Cut 2 smaller mushroom cottages to go with the large.

After coloring all the mushrooms, glue right mushroom top to the back of the large mushroom on the right side. Glue left mushroom to the left side of the large mushroom stem.

Stamp using black: the frog, snail pair (from the Large Mushroom Cottage), fence, tiny mushrooms, flying fairy and firefly (from Mushroom Cottage Accents). Die cut then color all pieces with Copics or favorite coloring system.

Cut a thin short piece of acetate, glue it to the back of the large mushroom at the top, glue the firefly to the end above where you want the frog. Use several layers of foam tape to pop up the top of the frog but glue his feet down to the large mushroom.

Glitter the fairy wings then glue her to the left cottage and large cottage. Pop up the 2 snails to the bottom between the center and left cottage. Pop up the fence and tiny mushrooms between center and right cottages.

Glitter the lantern and the firefly wings.

Other Products: White cardstock, acetate, foam tape, Copics: R20, R21, R22, RV10, RV02, E50, E21, E53, V01, V12, V15, B21, B24, Y00, Y11, Y15, G2, G3, YG93, W3, BG11, YG03, YG23, YG21, W1, YR24, Y21

Instructions:

The finished layout measure 12 inches by 12 inches. For your background use the paper #7B from Wild Poppy Collection paper, a 11 1/4 x 11 1/4"  deluxe flower shaping paper and a 10 1/2  x 10 1/2" in paper #6B also from the Wild Poppy Collection. Cover it with clear gesso. When dry, make droplet with liquid ink on your page.  (I used: Pastel salmon from 13 arts, twisted citron, bundled sage, abandoned coral from distress oxide spray and also cut grass from dylusion.  I also made droplets with white gesso.) 

In a regular paper cut 2 doilies from the Rounded Window Frame die. Glue one piece of this die at the left of your layout and one at the right and glue your picture over it with 3d foam dots to give dimension. 

Stamp differents kind of flowers. Clematis: Stamp onto white flower shaping paper with olive ink and also Coastal coral. Diecut with the coordinating die. Place face down into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe Flower Shaping kit tools. Glue 2 layers together. In the center of the flowers add white stamens from the assorted pearl medium pack kit. Add crystal clear on it using white glue. French Cottage collection:  Stamp onto red paper #12B with olive ink. Diecut with the coordinating die. Give further shape with Deluxe Flower Shaping kit tools. Glue 2 layers together. In the center of the flowers add a stamen from the assorted pearl medium kit. Flower from Classic Rose collection: Stamp onto white flower shaping paper with the coastal coral ink and color in the same ink. Diecut with the coordinating die. Give further shape with Deluxe Flower Shaping kit tools. Use 3 smalls layers to make a rose bud and 4 others to make the rose. Glue them together and add crystal clear with glue to make them shine.

Stamp in olive green, leaves from the Leafy accents. Color with the same ink and add a touch of coral ink. Cut with the coordinating die and shape with the shaping mold.  

Put cheesecloth and sewing thread on your layout next to your picture and glue your flowers and leaves over. Do the same thing at the left of your layout.

Stamp with Olive ink sentiment from Simple moment time piece.  Die cut with the coordinating die from the same collection. Glue it in the middle of your flowers.

For the final touch, add lace through your bouquets.

Other Products: Die cutting machine Cut’n’boss, heat gun, water mister, hot glue gun, hot glue, scissors, cheesecloth, sewing thread, ribbon, 13 arts mist pastel salmon, distress oxide spray: twisted citron, bounded sage, abandoned coral, delusion cut grass ink spray, clear gesso, white gesso

Instructions:

For the shaped base card, cut using outside Large Floral Butterfly Die. Cut another piece using designer collection paper and place into card using Designer Dries Clear Adhesive. For the Butterfly, stamp Large Floral Butterfly Cling Stamp Set on the Vellum Paper with Emboss – embossing stamp pad – clear and sprinkle Embossing Enamel - Aged Ivory and heat using Heat It Craft Tool, cut using the coordinating dies. Using this same die, cut another piece from designer paper. Using butterfly decorative die, cut piece from paper collection and adhere to the front using Adhesive Foam Strips (before you start assembling butterfly see photos for placing the order of butterfly layers).

Tip 1: For the deeper dimension use a double layer of Adhesive Foam Strips just on the wings.

Tip 2: For the perfect look, start placing Adhesive Foam Strips from front butterfly, place on vellum embossed butterfly and on the end butterfly cut out from designed paper.

To create Poppy flowers, stamp Wild Poppy Cling Stamp Set on foam paper with Ranger Archival Ink Pad - Red Geranium and cut using the coordinating dies. Colour with Gallery soft oil pastels 209. You will need 3 petals for each to create flowers. Use an iron or heat gun to heat the petals and when they start to shrink move them on the Molding Mat and press on the middle using shaping tool – using a bigger one. Layer the petals together using the hot glue gun making sure to offset them and use a paper piercer to make a hole in the middle and pull through the stamens. Add a little hot glue to the underside of the flower to adhere (watch tutorial). Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Stamp the Leafy Accents Cling Stamp Set on the white paper with Ranger Archival Ink Pad - Leaf Green, cut out with the coordinating die, shade use this same ink and shape leaves using mold. Sponge the leaves with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Cut the sentiment from the designer paper and place onto the card using adhesive foam strips. Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine, Emboss – embossing stamp pad – clear, Embossing Enamel - Aged Ivory

Instructions:

Cover a 6" x 6" card blank with pretty paper from the Mushroom Cottage Collection Paper Pad. Cut a piece of white card to 5 3/4" square. Adhere. Cut a piece of pink paper from the Paper Pad to 5" square. Adhere. Die cut a Simply Elegant Centerpiece Die in white card, adhere to card front.

Stamp two Large Mushroom Cottages from the Large Mushroom Cottage Stamp set, onto Deluxe Flower Shaping Paper. Use Memento Ink in Desert Sand. Color the roof with Distress Oxide ink ink Tumbled Glass with a water brush. Color the body in Memento ink in Lilac Posies with a water brush. Die cut with the matching die. Ink the edges in the same inks. Die cut the windows and doors from the second Large Mushroom. Color in with the same inks, plus a little Distress ink in Antique Linen for the window lights. Adhere to the Large Mushroom Cottage with Dries Clear Glue. Adhere Large Mushroom Cottage to the middle of the card using foam tape.

Stamp three Mini Mushrooms from the Mini Mushroom Cottages Stamp Set in Desert Sand ink. Color the same way using the same inks. Die cut with the matching dies. Ink the edges in the same inks. Add Ranger Glossy Accents to the circles of the tall Mini Mushroom. Adhere to side of card with foam tape.

Stamp the Fairy from the Mushroom Cottage Accents Stamp Set in the same way. Color in with the same colors plus a little Distress ink in Antique Linen for the hair. Die cut with the matching dies. Adhere to the Large Mushroom roof using Dries Clear Glue.

Stamp a Fairy from the Mushroom Fairies Stamp Set in Memento ink in London Fog. Color in the same way. Die cut with the matching die. Stamp again in White ink onto a piece of Vellum Paper. Die cut with the matching die. Cut off the wings and adhere to the Fairy with Dries Clear Glue. Adhere Fairy to side of Large Mushroom using Foam Tape.

Stamp a sentiment from the Just for You Sentiment Stamp Set in Lilac Posies ink. Die cut with a tag from the Ornamental Tags Die Set. Add a piece of twine to the tag, adhere to side of card. Cover Mushrooms and Fairies with Dries Clear Glue using a small brush. Sprinkle lots of clear glitter on top.

Other Products: 6 x 6 inch card blank, white card, Distress Oxide ink – Tumbled Glass, Distress ink – Antique Linen, Color Box Ink – Frost White, Memento Ink Pad - London Fog, hot glue gun, clear glitter, small brush, foam tape, Ranger Glossy Accents

Instructions:

Take a piece of 10 x 7” white cardstock and score in half along the 10” side creating a 5 x 7” card base. Using the largest die from the HCD2-7399 Flourish Companion Frame Die set, cut through both layers of the card base making sure to slide the die just over the edge of the score line to preserve the fold of the card. Using the same die also cut 1x with white cardstock and 1x from sheet 11B (Plaid Pastel) from the HCDP1-2127 Floral Butterfly Paper Collection. Attach it to the white layer and then glue both layers to the card base. From sheet 8B (Dark Purple) from the Floral Butterfly Collection die cut the 4 rectangle dies from the Flourish Companion Frame set carefully taped to the paper so they remain centered and secured. These will die cut the two purple frames shown in the photo. Ink the edges of both frames with Majestic Violet Ink. Next take the second and fourth largest die and cut a piece of HCGP1-493 Luxe Silver Cardstock with each of them. Also cut white card stock from each of them. Glue the silver on top of the white to give the silver a little extra dimension. Using the 3rd largest die, cut a piece of light green patterned paper from sheet 7B. Stamp this piece with a sentiment from the HCPC-3843 Special Birthday Sentiment Cling Stamp Set in Majestic Violet ink. Now to assemble the card, use Dries Clear glue and attach the large purple frame to the card base followed by the larger silver die which will fit nestled into the purple frame just glued. The same steps will be done for the smaller frame gluing the purple frame and silver decorative piece onto the light green piece. Lastly Attach the green to the center of the card base using 3d foam tape.

Stamp the following items onto HCPP1-475 Deluxe Flower Shaping Paper unless otherwise noted. Stamp the large Clematis 2x and the medium Clematis 3x in Ranger Distress Oxide - Wilted Violet Ink using HCPC-3954 Clematis Cling Stamp Set. Heat emboss in clear embossing powder. Stamp the small Clematis 2x in Archival Leaf Green. Stamp all foliage in Archival Olive Green from HCPC-3835 Leafy Accents Cling Stamp Set 3x, HCPC-3931 Large Floral Urn Cling Stamp Set 4x, and HCPC-3933 Floral Shoppe Fillers Cling Stamp Set 3x. Lastly stamp the dragonfly from the HCPC-3983 Decorative Dragonfly Cling Stamp Set onto watercolor paper with Versacolor White Opaque Ink and heat emboss with silver embossing powder. Once everything is stamped, die cut everything with the coordinating dies.

To complete the Clematis flowers, color the purple flowers with the HCPP1-475 Stack and Store Daubers starting in the centers with Leaf Green and then Majestic Violet ink for the remainder of the flower. Color the Leaf Green stamped Clematis with Leaf Green Ink. Run all the Clematis flowers through the HCFB1-5006 3D Clematis Shaping Mold . For the purple flowers use the fluffy white HCS1-460 Bridal Bouquet Stamens and color the stamens with Archival Vivid Chartreuse Ink before adding them to the centers of the flowers. Add Rajni Chawla’s Crystal Clear glitter using Dries Clear Glue with a Hydra Sponge to finish off the focal flowers. To finish the filler flowers simply add Ribbit Prills to the centers using a glue gun. Now for the foliage, Color the Leafy accents very lightly with Leaf Green just to add a touch of color making sure to keep them light. Run the Leafy Accents leaves through the HCFB1-467 3D Leafy Accents Shaping Mold. For the darker leaves from the Large Floral Urn set color them using Leaf Green in the centers and ink around the edges in Olive. Shape using the HCST1-401 Deluxe Flower Shaping Kit stylus from the back to give some dimension then using the small Grooved Golf Tool add a sharp crease from the back side and pinch the end to give the leaf a nice sharp point. Color the Floral Shoppe Fillers using the Yellow Zig Clean Color Real Brush Marker then dab on small dots of Dries Clear Glue and sprinkle with Clementine Ultrafine Transparent Glitter. Shape a little from the back side to give extra dimension. Lastly color the dragonfly using the Zig Clean Color Real Brush Markers in Pale Green and Light Violet.

Now simply begin arranging the flowers on the card first by gluing the Leafy Accents to the left hand corner as shown with a glue gun. Then begin layering the Yellow Sprigs followed by the focal flowers. Add in the darker leaves, and lastly the filler flowers to finish the look. Add the dragonfly to the top right corner of the card. Complete the inside as desired.

Other Products: Ranger Distress Oxide - Wilted Violet, Clear Embossing Powder, Fine Detail Silver Embossing Powder, Water Color Paper, 3D Foam Tape, Scissors, Glue Sticks, Glue Gun, Paper Trimmer, Die Cut Machine

Instructions:

Card size is 6 x 6”. Using the 6 x 6” Round bi-fold card base, fold the middle circle in half. Cut three circles using the Rounded Eyelet Window Die from the Seasonal Wreath Paper Collection, Sheet 7B. Adhere the 3 circles to each panel. Using the Rounded Lattice Die, cut one from white cardstock. Adhere to the front of the card. Cut one from white card stock using the Rounded Window Frame dies 2, 3, and 4. Adhere to the inside of the card.

Stamp the Clematis Spray on White card stock twice. Color using the Zig Markers. Cut out with the coordinating die. Place one on the front of the card and the other on the inside.

Stamp the Clematis flowers on White card stock with black ink, color with the Lumin Arte’ Chiffon Pink. Cut out with the coordinating die, place in the matching mold and run through the die cut machine to shape. Adhere the flowers on top of the sprays as shown.

Stamp the sentiment on white card stock with the Lilac Posies ink, cut out using the Ticket and Tags die, add one foam dot and adhere to the card.

To finish, add tiny black pearls to the center of each flower.

Other Products: White card stock, Paper trimmer, Die cut machine, Lumin Arte' inks, Black pearls

Instructions:

Click HERE for video tutorial. Score a 11" x 4 1/4" piece of Deluxe Flower Shaping paper at 5 1/2" and fold to create a 4 1/4" x 5 1/2" top folding card base. Cut a 1" x 5 1/2" piece of pattern paper from Holiday Star Paper collection and adhere it on the left side of the cardbase. Die cut a piece of Luxe Silver cardstock using the die from Classic Companion Border Die, adhere it on the pattern paper and trim off the excess. 

Take a 3 1/4" x 5 1/2" piece of white cardstock and position it on the scoreboard so that it is at an angle. Now score the patten as shown. Adhere this piece on the card using double sided foam strips.

Stamp the sentiment from Starry Holiday Greetings Cling Stamp Set on a piece of white cardstock using Deep Purple Archival ink. Color in the image using Zig Clean color real brush pens. Die cut it using the matching die from Starry Holiday Greetings Die. Die cut 2 more pieces of white cardstock using the same die and 1 piece using the solid die. Adhere all of them together and then adhere the resulting piece on the card as shown.

Add a few silver rhinestones on the silver die cut to add finishing touch.

Other Products: Silver Rhinestones

Instructions:

Card size is 8 1/4 x 3 1/2”. Score and fold 8 1/4 x 7” white cardstock at 3 1/2” on the short size to create slimline tent fold card base. Cut Luxe Silver cardstock 2x to 8 1/8 x 3 3/8”, purple paper from the Holiday Star Paper Collection sheet 12B 2x to 8 x 3 1/4” and white cardstock 2x to 7 7/8 x 3 1/8”. Edge both purple pieces with Archival Deep Purple ink. Stamp one of the white pieces with the star and snowflake images from the Large Holiday Star Cling Stamp set and the Noel sentiment from the Starry Noel Cling Stamp set using Archival Deep Purple ink. Stack one of the silver pieces, one of the purple pieces and the stamped white piece and adhere to the inside of the card. Place the other white piece in a snowflake embossing folder and run through the diecutting machine to emboss. Stack the silver, purple and white embossed pieces and adhere to the card front.

Stamp the ‘Merry Christmas’ sentiment from the Starry Holiday Greetings Cling Stamp Set on Luxe Silver cardstock using VersaMark and cover with WOW Metallic Silver Embossing Glitter. Heat set and diecut with the coordinating die. Diecut 4 more times from white cardstock, adhere together using dries clear adhesive and adhere behind the silver sentiment. Adhere to the top of the card front.

Stamp the Small Festive Poinsettia on Deluxe Flower Shaping paper using Archival Petunia ink, color using the same ink and diecut using the coordinating die. Add more ink to the edges and color the backs of the flowers. Place in the Small 3D Festive Poinsettia Shaping Mold, spritz with water and run through the diecutting machine. Pierce the centers using the Groove Golf Tool, add silver Assorted Bead Stamens-Medium and secure with hot glue. Use two same size flowers to create the poinsettia.

Stamp the small Holly Berry Sprays on Luxe Silver cardstock using VersaMark and cover with WOW Metallic Silver Embossing Glitter. Heat set, diecut with the coordinating die and lightly shape using the Deluxe Flower Shaping kit. Adhere the poinsettias and sprays to the center of the card front using hot glue.

Add some extra sparkle by sponging the poinsettias with dries clear adhesive and sprinkling with Rajni Chawla’s Crystal Clear Glitter.

Other Products: White Cardstock, Misti, Diecutting Machine, VersaMark, WOW Embossing Glitter – Metallic Silver Sparkle, Funnel Tray, Hot Glue Gun, Archival Petunia Ink, Snowflake Embossing Folder

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 10 1/2" x 7 1/2”, score at 5 1/4” along the long side and fold. Die cut the shaped base using the No. 1 background die from the HCD2-7383 Simply Classic Rectangle Frame Die. Die cut a single background die using the No. 1 die from the HCD2-7383 Simply Classic Rectangle Frame Die Die out of Deluxe Flower Shaping Paper. Die cut the light green/blue  background using the same die from the paper collection and adhere to the front of the card.

Stamp the background stamp image from the HCPC-3998 Joyous Noel Background Cling Stamp Set in clear embossing ink and heat emboss with white embossing powder. Sponge Spun Sugar, Tumbled Glass and Shaded Lilac inks over and die cut with the No. 2 die from the HCD2-7383 Simply Classic Rectangle Frame Die set. Adhere over the front of the card. Die cut a silver frame using the No. 2 die from the HCD2-7383 Simply Classic Rectangle Frame Die and adhere to the edge of the stamped image.

Stamp the large angel image from the HCPC-3997 Starry Noel Angel Cling Stamp Set in Shaded Lilac and Tumbled Glass inks and die cut with the coordinating die. Die cut a plain die out of Deluxe Flower Shaping Paper and adhere the stamped image to it and then adhere to the front of the card as shown with foam tape.  

Stamp the large and small spray images from the HCPC-3959 Holly Berry Spray Cling Stamp Set in English Ivy on Deluxe Flower Shaping Paper. Colour the leaves with Leaf Green ink and die cut with the coordinating dies. Add Crystal Clear glitter to the leaves with clear gloss gel medium and a paintbrush.  Adhere a large and small spray to the top left of the card.

Stamp the small spray image from the HCPC-3958 Small Festive Poinsettia Cling Stamp set in English Ivy ink on Deluxe Flower Shaping Paper.  Colour the leaves with Leaf Green ink and die cut with the coordinating die.  Shape using the coordinating die and add Crystal Clear glitter using clear gloss gel medium and a paintbrush.  Adhere to the bottom right of the card.

Stamp the small flower images from the HCPC-3957 Large Festive Poinsettia Cling Stamp and the smaller flower images from the HCPC-3959 Small Festive Poinsettia Cling Stamp set in Paris Dusk ink on Deluxe Flower Shaping Paper. Colour the images with Periwinkle, Violet and Magenta Hue inks and die cut with the coordinating dies. Colour the backs of the petals with Periwinkle ink and then shape using the coordinating mold and assemble with two of each size petal. Pierce the centres of the flowers and insert the silver pearl stamens and secure them with Dries Clear glue. Add Crystal Clear glitter using clear gloss gel medium and a paintbrush. Trim the stamen threads and adhere over the holly sprays with a hot glue gun – two large and one small flower to the top right and one small flower to the bottom right of the card.

Stamp the bell, ornament, holly, fir branches and pine cone images from the HCPC- 3967 Winter Wreath Accents Cling Stamp set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Real Brush Markers and Prismacolour pencils and die cut with the coordinating dies. Adhere around the flowers as shown.

Stamp the dove and holly images from the HCPC-3997 Starry Noel Angel Cling Stamp Set in Black Onyx ink. Colour with Zig Clean Colour Real Brush Markers and die cut with the coordinating die. Die cut a plain image out of Deluxe Flower Shaping Paper and adhere the painted image on the top. Add Crystal Clear glitter to the image with clear gloss gel medium and adhere over the poinsettias as shown.

To finish add clear sparkles to the angel's gown at the base.

Other Products: Iris cardstock, Prismacolour Pencils, Distress Oxide inks - Shaded Lilac, Tumbled Glass, Spun Sugar, clear gloss gel medium, paintbrush, foam tape, Clear sparkles, Versafine Black Onyx ink, Ranger Archival ink - Violet, Ranger White embossing Powder, Hero Arts Embossing & Watermark ink

Instructions:

Card size is 7 x 7". Die cut the square French courtyard die using paper from the collection. Adhere to a slightly larger square of the yellow and pastel teal paper which has been inked around the edge and adhere this to a 6.2” square of white card. Cut and adhere a 6.75” square pastel green paper to a 7” square card base and adhere the white square to it using foam pads.

Stamp the bursting bloom edge x2 onto white card using the teal zeal ink, die cut and adhere to the right edge of the white square.

Diecut the 4.5” simple centrepiece in white card, edge with daffodil delight and adhere to the left of the card base using foam pads.

Stamp the mosaics onto pale teal paper and onto white card using teal zeal ink. Diecut the largest and 3rd shapes of the teal paper and the smallest and 2nd shapes of the white stamp. Edge the white diecuts with yellow ink. Layer the mosaic onto the card base as shown using foam pads under the white card elements.

Die cut the letters using yellow card, position and adhere to the card.

Make the animals: stamp using black stazon ink and colour using a mix of water colour pens, copics and gel pens. Die cut and shape using the flower shaping tools. Adhere to the card as shown to cover the join of the bursting bloom edge stamp.

Other Products: White cardstock, yellow cardstock, copics and gel pens, foam pads, hot glue, daffodil delight ink - stampin up!

Instructions:

Its a ready folding card measuring 5 3/8 by 6 5/8". Trim gold luxe card measuring 5 1/8 by 6 1/2" and adhere on to the card base using dimensional tape. Trim white card which is sighly smaller than gold card and adhere on the gold card using clear glue, trim another panel from Decorative Dragonfly Paper Collection and adhere on to the white card. Trim 4 1/8 by 5 1/2 panal from paper collection and adhere on to the card using clear glue.

Die cut frame on the gold luxe card using French Courtyard Die trim all four sides and adhere as shown using clear glue.

Diecut circle frame on green cardstock by placing 2 dies from Eyelet Circle & Basic Small Die Set, apply glue on the circle frame and cover with glitter powder, adhere on the card using clear glue.

Stamp the Sentiment Best Wishes from Celebrate Live Sentiment Stamp Set using Forget me not Archival ink in the center of the circle frame.

Stamp leafy accents images with leaf green ink on deluxe paper, color the images with leaf green ink and mowed lawn ink using daubers, shape the leaves from back with golf groove tool, apply clear glue and cover with Nida Tanweer Magic Glitter.

Stamp Rustic Sunflowers images on Mint Vellum using versamark embossing ink and cover with White Embossing Powder and heat it using heating tool, and die cut with coordinating die. Shape the flowers using shaping kit and make few a flowers. Add pearls and glass beads in the centers using clear glue, apply clear glue on the flowers, spray and leaves and sprinkle some Nida Tanweer Magic Glitter Powder.

Arrange all ready elements with flowers on the card front using hot glue and embellish the card with pearl beads, mould shapes and Nuvo Drops.

Other Products: Dimensional Tape, Hot glue, green card, white card, mint color vellum, VersaMark Embossing Ink, Nida Tanweer Magic Glitter Powder, Mold Shapes, Nuvo Drops, Pearl Beads, Pearl, Glass Beads, Mowed Lawn Distress Ink.

Instructions:

Click HERE to view the video tutorial for the card. Click HERE to view the video tutorial for the Dragonfly and flower coloring.

Score a 12" x 3 1/2" piece of Deluxe Flower Shaping paper at 6" and fold to create a 3 1/2" x 6" small slimline card base. Cut a same sized piece of pattern paper from Decorative Dragonfly Paper Collection and adhere it on the card base. 

Die cut a sheet of white cardstock and a piece of Luxe Silver cardstock using the dies from French Courtyard Die. Modifly the die cut as shown and adhere the resulting 2 white pieces on 2 Silver pieces, slightly offsetting them. Then adhere the resulting 2 pieces on the card. 

Stamp the images from Daydream Florals and Dragonfly Florals cling stamp set on a piece of Deluxe flower shaping paper using Jet Black Archival ink. Color them using Zig Clean color real brush pens and water brush. Die cut them using matching dies from Daydream Florals and Dragonfly Florals die. Adhere them on the card using dries clear adhesive and foam strips.

Stamp the dragonfly image from Decorative Dragonfly cling stamp set on a piece of vellum using VersaColor white pigment ink and heat emboss it using white embossing powder and heat tool. Die cut it using matching die from Decorative Dragonfly die. Ink it from the back using Vibrant Fuchsia and Manganese Blue Archival inks and Stack and Store Daubers. Adhere it on the card as pictured.

Adhere a few rhinestnes to add finishing touch.

Other Products: Scissors and rhinestones

Instructions:

The finished size of the card is 5" x 7". Using the Gateway Fold Card, cover the front with a piece of Sheet 8B of the paper Collection. I used the Large Outline die of the Teardrop Lattice Gateway Die for this. I cut the decorative portion of the die using white cardstock. Glue this piece onto the card front. I cut another of the large outline die using a piece of Sheet 3A and glued this to the back of the card front. Now lay the smaller archway die from the set onto the card front being careful to center on the decorative die cut. Run this through the die cut machine and it should cut an opening through all these layers. I had to run this through about 3 times to get the die to cut cleanly.

Using the large Gateway die, cut two pieces out of Sheet 4A of the paper collection. Glue these two pieces to the next two pages of the Gateway Fold card. This covers all the inside portion of the card.

Stamp the flower petals with Poppy Archival ink onto the Deluxe Flower Shaping Paper. Color the centers of the flowers with Leaf Green ink using the Stack and Store Daubers. Color the rest of the petals with the Poppy ink and remember to do the back as well. Cut out using the coordinating die. Lay onto the mold, spritz with water and run through the die cut machine. Allow to dry then glue two petals together to form the flower. Add the prills to the center of the flowers and allow to dry.

Stamp the Poppy Accents and the Leafy Accents onto the Deluxe Flower Shaping Paper using Fern Green. Color using Leaf green and and the Stack and Store Daubers then go around the edges with Fern Green ink to add some shading to the leaves. Cut out using coordinating dies. Lay the Leafy Accents onto the mold, spritz with water and run through the die cut machine. Allow to dry.

Using the Deluxe Flower Shaping kit, shape the other leaves and seed pods and set aside.

Arrange everything onto the Floral Wires and hot glue down. Decide on placement on the card front and glue down. The card is finished.

Other Products: Die Cut Machine, Hot Glue Gun, White Cardstock, Archival Poppy Ink

Instructions:

Create a top fold card from a smooth white card stock measures 8” x 6”. Choose the designer paper from Rustic Sunflower Paper Collection and cut to size measuring 7 1/2” x 5 1/2”. Next, mat this paper on Luxe Gold Card stock making a delicate border of 1/16” on all four sides. Mat this ready panel on white card base using dimensional tape.

Cut decorative die cuts from blue designer paper and Luxe Gold card stock using Lattice Flourish Gateway Die. Stack both blue and gold frames together, slightly offset. Next die-cut two decorative frames one from same blue designer paper and other from Luxe Gold card stock using Regal Lattice Gateway Die and stack them together, slightly offset. Die cut two decorative corners from light designer paper and Luxe Gold card stock using corner dies from Album Tags and Accents Die and stack them slightly offset. Arrange all these ready die cuts on the card as shown using Designer dries clear adhesive.

Stamp the image from Elegant Moments Timepiece Cling Stamp Set on brown card stock using VersaMark and heat emboss it using Aged Ivory Embossing Enamel. Again stamp the same image on white card stock using Encore ultimate metallic ink in gold. Die cut both images using coordinating dies. Stamp the clock hands on the Luxe Gold card stock using versamark and heat emboss with golden embossing powder and cut out with coordinating die in the Elegant Moments Timepiece die set. Cut out the clock face frame in Luxe Gold Card stock using two circle dies in Elegant Moments Timepiece die set. Create a shaker element on the clock face using foam tape, sequins and acetate sheet. Adhere all the pieces of clock on the card to make a dimensional shaker clock using dimensional tape as pictured.

For the flowers, stamp flower images from Rustic Sunfltower Cling Stamp Set on the Deluxe flower shaping paper using brushed corduroy distress oxide ink and leaf green archival ink and color them using using sunflower archival ink and goldenrod archival ink. Stamp the leaves from Leafy Accents stamp set on Deluxe Flower Shaping paper with Archival Fern Green ink and color them using Archival Leaf Green ink and Archival Vivid Chartreuse ink. Cut the flowers and leaves using their coordinating dies and shape them using coordinating 3D shaping mold. For fillers stamp, color and cut a few Wisteria flowers from Cascading Petals Collection using Archival Cactus Flower ink.  Shape the flowers using Deluxe Flower Shaping Kit. Now add Express-O Yourself prills to the centre of flowers.

Now add all the elements to the card as pictured. For sentiment, stamp “For My Friend” from Just For You Sentiments stamp set on a pink designer paper using versamark and heat emboss  in white and add to the card using foam tape.

For final look apply Crystal Clear powder to the flowers and leaves using Art glitter dries clear glue. Also add Morning Dew Nuvo drops to the flowers and leaves.

Other Products: Dimensional Adhesive, hot glue, scoreboard, die-cutting machine, VersaMark watermark stamp pad, Distress oxide ink, Morning Dew Nuvo drops, embossing powder in white, sequins.