Instructions:

Fold white cardstock to 4.5  x 9 1/4" with fold on the side. Then use the biggest die from the Slim Ornate Rectangle Die to cut leaving the left side of the die over-hanging fold by about 1/4". Cut a full front with the same die from the white cardstock and another one from the Floral Sentiments Paper Collection. Glue them on. Cut out a silver and a white frame with the die No. 2 from the Slim Ornate Rectangle Die. Cut out a pink panel with the same die set. Adhere all elements to the base. Stamp the sentiment with the Friend Floral Sentiment Cling Stamp Set in Vibrant Fuchsia ink and cut it out with coordinating die. Stamp the sentiment with the Friend Floral Sentiment Cling Stamp Set in Tuxedo Black ink, color it and cut it out with 2 coordinating dies. Adhere all elements to the base as pictured.

Stamp blossoms from the Iris Garden Petals Cling Stamp Set in Vibrant Fuchsia ink onto Deluxe Flower Shaping Paper. Color their edges with Vibrant Fuchsia ink and their centers with Sunflower ink, diecut with coordinating dies and shape with mold. Add Pastel Pearl Small stamens to all flowers. Stamp blossoms from Classic Rose Cling Stamp Set in Leaf Green ink onto Deluxe Flower Shaping paper, diecut with coordinating die. Shape them with mold and add some Go Mango Prills. Stamp 3 branches from the Leafy Accents Cling Stamp Set in Fern Green ink, color them with the Leaf Green ink, cut out with coordinating dies and shape with coordinating molds. Stamp branches from the Iris Garden Accents Cling Stamp Set in Fern Green and Sunflower inks, color them with the Leaf Green and Sunflower inks, cut out with coordinating dies. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers and branches and add some pearls.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, sisal, colored pencils, self-adhesive pearls

Instructions:

Prepare a 6 1/4 x 6 1/4 inch card base using the Deluxe Flower Shaping paper. Add a piece of the Floral Sentiment paper on top slightly smaller. Cut another piece smaller, distress the edges, add foam dots to the back and adhere to the card.

Cut 2 of the Delicate Daisy Corner and Border dies out of white card stock and add to the card as shown.

Stamp one of the Garden Lily Spray and Fillers on Gold with the Gold Encore ink, heat emboss with the gold embossing powder. Cut out with the coordinating die and adhere to the card.

Stamp the leaves on white card stock with the Cottage Ivy ink, color in with the Vivid Chartreuse ink and cut out with the coordinating die. Place in the matching mold.

Stamp the Garden Lily flowers on white with the Vibrant Fuchsia ink. Color the center of each flower with the Buttercup ink. Cut out with the coordinating die. Highlight the edges with more of the Vibrant Fuchsia ink and place in the matching mold. Run both the flowers and leaves through the die cut machine to shape. Using the Golf tool put a hole in each flower. Add the Stamens and secure with hot glue. Adhere the leaves and flowers to the center of the card.

To finish add glitter to all the leaves and flowers.

Other Products: Paper trimmer, Die cut machine, Heat gun, Foam dots

Instructions:

For the card base take cream cardstock 13 by 6 1/2 inches folded into half from long side to create square shape card measuring 6 1/2 by 6 1/2 inches. Cut panel on cream card stock measuring 6 1/4 by 6 1/4 inches and adhere it on the card base using dimensional tape. Cut 6 by 6 inch panel from Floral Sentiments Paper Collection sheet number 10A and adhere on the card base using clear glue. 

Die cut the shape of Octagon from Simple Centerpiece Die Set using 2nd largest die and 5th largest die on cream card, die cut the shape of Octagon from Simple Centerpiece Die Set using 3rd largest die and 6th largest die on the pattern paper. Adhere largest octagon of designer paper on the largest cream octagon and smallest designer paper octagon on the smallest cream octagon shape using clear glue. Add these layers on the card base using dimensional tape, add nuvo drops on the cream octagon edges and dry.

For the Lilies, stamp the flower images using Rose Madder Ink on the cream cardstock, die cut using coordinating dies, color the centers with leaf green and edges with Vibrat Fuchsia using daubers, shape the flowers in shaping mold, finish shaping using shaping kit add pearl beads in the center using hot glue, apply clear glue on the flowers add dress with Nida Tanweer Magic Glitter Powder.

Stamp the Buds & fillers from Gargen lily Bouquet & Buds Stamp Set & Garden Lily Spray & Fillers Stamp Set on Deluxe Flower Shaping Paper Using Leaf Green ink color the fillers with Pink Peony Ink & Mowed Lawn Distress Ink Using Daubers, Shape from back using shaping kit, cover with clear glue and magic glitter.

Stamp the Wild Poppy accents on the Deluxe Flower Shaping paper using leaf green ink and color the image with Mowed Lawn Distress Ink and Pink Peony Ink, die cut using coordinating dies, cover with Magic Glitter.

Stamp the sentiment image from Special Floral Sentiment Cling Stamp Set on the Gold Luxe Card using Versamark Embossing Ink, cover with golden tinsel embossing powder, heat it using heating tool, die cut using coordinating die, add extra layer underneath for the sturdiness.

Arrange all ready elements as shown in the picture using hot glue, and embellish the card with Paper Magik Decorative Beads.

Other Products: Cream Card Stock, Mowed Lawn Distress Ink, Nuvo Drops, Dimensional Tape, Paper Magik Decorative Beads, Hot Glue, Pearls, Versamark Embossing Ink, Golden Tinsel Embossing Powder.

Instructions:

Ready tent fold card measures 5.5" × 7.5". Cut a mat from designer paper collection measuring 5 3/8" × 7 3/8". Adhere it on ready card base. Cut another mat from designer paper collection measuring 5" × 7", adhere it on white cardstock which is 1/8 of an inch bigger on all four sides. Mat it on card using dimensional tape. Cut a frame from white cardstock using die from Rectangle Filigree Frame Die set and adhere it on card using foam strips. Cut 2 Ovals, one from designer paper and one from white cardstock and adhere them on card using dimensional tape. Stamp sentiment on white cardstock using leaf green ink and olive green ink. Cut with coordinating die, cut 5 more from white cardstock. Glue them together to add dimension. Adhere it on card as pictured. 

Stamp image from Grateful Floral Sentiment Stamp on watercolor paper using black archival and paint with zig markers. Cut frame with coordinating die, also cut one more frame from Luxe Gold cardstock. Glue both together and cut into half. Glue both pieces on card using foam dots. Stamp small Wild Rose flower on deluxe flower shaping paper using magenta hue ink and cut with coordinating die. Paint flowers using magenta hue and vibrant fuchsia ink, shape using small ball tool and add prills to the center of the flowers. Stamp leaves from classic rose, Holly Berry spray and Wild Aster Spray on Deluxe Flower Shaping paper using fern green ink, paint using leaf green and fern green ink. Cut with coordinating dies and shape using stylus. Arrange flowers and leaves using hot glue as shown.

For finished look, apply Crystal Clear glitter on flowers using Art Glitter Dries Clear  adhesive.

Other Products: Smooth White Cardstock, Watercolor Paper, Hot Glue

Instructions:

Card size:  5 3/8” x 7”. Fold white cardstock to make a 5 3/8 x 7” card. Cut a panel of decorative paper to 5 1/8” x 6 7/8” then glue it to the card front.

Die cut Oval Filigree Frame from white then pop up onto card. Die cut large oval from the Oval Filigree Frame from light pink decorative paper then pop it up onto white filigree oval.

Stamp Friend Floral Sentiment 2 times with black and once again using Magenta Hue. Color outer floral frame with alcohol inks including 2 of the flowers from the second black stamping. Fussy cut the 2 extra flowers, die cut the floral frame. Die cut the sentiment stamped with Magenta Hue.

Pop up the floral frame, pop up extra flowers on top then glue the sentiment inside opening to fit. Glitter card

Other Products: White cardstock, Copic Markers: RV00, RV10, RV55, RV04, YG03, YG23, YG17, Y11, Y15, Y19

Instructions:

Using the Simple Centerpiece Dies make the shaped card. Cover with a piece of Sheet 6A of the paper collection.Cut out the Elegant Hearts Centerpiece dies using white cardstock. Glue to the card front then set aside. 

Stamp the flower petals onto the Deluxe Flower Shaping Paper in Rose Madder ink and color using Buttercup and Pink Peony then cut out using coordinating dies. Stamp the leaves in Leaf Green ink onto Deluxe Flower Shaping paper then color using Pink Peony and Vivid Chartreuse and cut out with coordinating dies. Edge the leaves with Olive ink. Lay the petals and leaves onto the mold, spritz with water and run through the die cut machine. Lay out onto the desk to dry. When dry use the Golf Tool to punch a hole in the center and curl the edges under. Thread through the stamens and use hot glue to hold in place. I used two petals to form one flower.  

Stamp the sentiment onto white cardstock with Rose Madder ink and cut out with the Banner die and use dimensional tape to adhere to card front. Next decide on placement of the flowers and leaves and glue down.  The card is finished.  

Other Products: Hot Gue Gun, Die Cut Machine, White Cardstock, Dimensional Tape

Instructions:

Cut out the base from the Slim elegant Recktangle Die set from white paper, then use the same die to cut out an element from the paper collection and glue it to the base.
Cut out elements from the same set of dies from white and silver paper, glue the white element underneath the silver element so that it protrudes a little from the bottom. From the Slim Eyelet Heart Rectangle Die set, cut a base frame with lace from the silver paper, then cut out a slightly smaller element from the paper collection and glue it to the base with Double Dots 100pc. - 3D Foam Circles.

Stamp the Friend Floral Sentiment set with black ink on the white paper. Cut out with the matching die. Using the same die, cut out an element from silver paper and glue it under the previously cut element so that it protrudes a little from the bottom.
Color with watercolor pencils.

Glue as shown.

Other Products: Watercolor pencils, die cutting machine

Instructions:

Take a 6-inch square tent fold card blank, cover with pale green paper from the Friendship Rose Paper Collection using Designer Dries Clear Adhesive. Die cut six corners from the Delicate Daisy Corner and Border Die Set in white card. Adhere one to each corner of card. Cut a piece of pink paper from the paper pad to 4 1/2 inches square, adhere to centre of card at a slight angle. Adhere two Daisy Corners.

Stamp in Ranger Archival Rose Madder ink onto Deluxe Flower Shaping Paper, an assortment of Classic Roses from the Classic Roses Cling Stamp Set. Color with the same ink using a Dauber. Die cut with the matching dies. Ink the edges in the same ink, using a Dauber. Place in the 3D Rose Shaping Mold, lightly mist with water and run through a die cutting machine.

Stamp lots of leaves from the Leafy Accents Cling Stamp Set, in Ranger Archival Leaf Green ink. Color with the same ink using a Dauber. Die cut with the matching dies. Place in the Leafy accents Shaping Mold, lightly mist with water and run through a die cutting machine. Tap out and lightly shape with the Stylus from the Deluxe Flower Shaping Kit. Ink the edges of the leaves with Rose Madder ink.

Make five buds using the small Classic Rose Petals. Use one set of small petals for the small Rose Buds. Use two sets for the medium and large Roses. Apply Dries Clear Adhesive to the reverse and bring all the petals up into the middle and hold for a few moments to allow the glue to dry. Add four layers of open petals for all Roses. Add petal layers to each bud with Dries Clear Adhesive. Off-set the petals as you go. Make one large, two medium and two small Classic Roses. Adhere lots of leaves across the card front. Adhere the Roses to the leaves, in a line, with the largest Rose in the middle.

Stamp onto white card, with Leaf Green ink, a sentiment from the Friendship Sentiments Cling Stamp Set. Die cut with the smallest frame from the Slim Eyelet Rectangle Die Set. Adhere to card front by adding glue to either end whilst making a hollow shape in the middle. Sponge Dries Clear Adhesive to card, apply clear glitter.  All done.

Other Products: 6-inch square card blank, white card, water mister bottle, die cutting machine, clear glitter.

Instructions:

Fold a 7” x 9” piece of white card at 4.5” to create a tent fold card. Place the largest circle frames dies over the fold and die cut to create a shaped card base. Die cut the largest circle frame using white card and paper from the collection, layer and adhere to the card base. Die cut the largest decorative circle frame using luxe silver card and the largest eyelet circle using a pale paper from the collection, layer onto the card using dries clear adhesive.

Die cut the solid background to the sentiment using white card and a coordinating paper from the collection. Die cut the sentiment using luxe silver card. Adhere these 3 layers and position to the centre of the card using foam pads.

Make the leaves: Stamp the  leaves x2 onto paper from the Lily collection using northern pine ink, die cut and add additional colour to the edges using a dauber. Place face down into the mold, spritz lightly with water, and run through the die cutting machine to shape.

Make the pink lilies: Stamp 4 sets of small petals using rose bud ink onto flower shaping paper. Stroke the ink from the centre of each petal towards the outer edge using a triangle dauber. Die cut, place face down into the shaping mold, spritz with water and run through the die cutting machine to shape. Add additional shape if required using the flower shaping tools. Adhere 2 sets of 3 petals together, offsetting the petals, to create the flower. Thread through 6 or 7 stamen, push into position and hold in place with hot glue. Sponge dries clear adhesive to the petals and sprinkle with transparent glitter. Allow to dry and snip off the excess wire under the flower.

Large pink fillers:- Stamp x2 large spray fillers onto white stamping card using northern pine ink for the leaves and rose bud for the flowers, use the water brush to colour the pink flowers with rose bud ink,  diecut. Use the daubers to add shading to the flowers with the rose bud ink and lightly colour the leaves with bamboo leaves ink. Add shape using the flower shaping tools.

Position the leaves and flowers to wrap around the sentiment and secure with hot glue.

Other Products: White card, hot glue, foam pads

Instructions:

The ready-top fold card measures, 8 1/2″ by 6 1/2″. To prepare the card base, cut a smooth white cardstock measuring 81/2″ by 6 1/2″ and a second piece measuring 9″ by 6 1/2″. On 9″ length, score at 1/2″. Glue the smaller panel on the hinge to make the card front.

Choose the designer paper from the designer paper collection and cut the panel 1/8″ smaller than the card front. Glue it on the luxe gold cardstock to create a delicate border on all four sides. Secure the oval die from the Oval Filigree Frame Die set and cut the window as shown. To the window, adhere an acetate sheet from behind. 

Stamp the floral sentiment frame on Rajni Chawla's vellum cardstock with white pigment ink using Friend Floral Sentiment Cling Stamp Set and sprinkle white heat embossing powder. Dust extras and heat set it using a heating tool. Color the image  using Copic markers from the back and cut the image using its coordinating die set. Glue the image in the center so that it shows from the window above. 

Next, put some shaker elements and layer the window panel on the card front using double-sided tape and close the window. 

For the wild roses, stamp the flower petals with Magenta Hue archival ink using the Small Wild Rose Stamp set and cut them using its coordinating dies. Ink the flower centers using Leaf Green and color the flowers using Magenta Hue. Shape the flowers using a Deluxe flower shaping kit. Once the shaping is done, assemble a few flowers using ball tools from the shaping kit and add matching seed beads to the flower centers. Apply a layer of crystal lacquer on the flowers and dust Rajni Chawla’s Crystal Clear Powder.

Stamp, color, and cut a few Wisteria flowers using Magenta Hue Archival ink and shape them using a flower shaping kit. Add flower pollens using a glossy accent and use these flowers as fillers. Also, stamp 2 sets of leaves using Leafy Accent stamp and Olive Green Archival ink and cut them using the coordinating dies. Color the leaves using the same inks and shape them using a deluxe flower shaping kit. Once, all the elements are ready, assemble a small bouquet on the left side corner and complete the card by adding a white heat-embossed vellum butterfly.

Other Products: Smooth White Cardstock, Funnel Tray, Die Cutting Machine, Foam dots, Score Board, Hero Arts White Pigment Ink.

Instructions:

Card size 8” x 3.5” (final size). Take pattern paper from HCDP1-2151 Floral Sentiments Paper Collection using die HCD3-7432 Slim basic Rectangle die and adhere on card base using designer dries clear adhesive. Take another layer of HCD3-7431 Slim Eyelet Rectangle die on luxe gold cardstock and adhere it using foam tape. Cut another layer using HCD3-7432 Slim Basic Rectangle die on pattern paper and adhere it using designer dries clear adhesive.

Cut one die using HCD2-7427 Filigree Accents die on white cardstock and luxe gold cardstock, adhere them using foam tape and designer dries clear adhesive, as shown.

Stamp floral image from HCPC-31023 Special Floral Sentiment Cling Stamp on white cardstock using archival ink-mulberry and cut it with coordinating die and color them using Zig markers and add crystal clear glitter. Now cut them into pieces and adhere them using foam tape.

Add sentiment from HCPC-31024 Friend Floral Sentiment Cling Stamp Set on white cardstock using archival ink-vibrant fuchsia and mulberry and cut it with coordinating die and adhere it using designer dries clear adhesive.

Other Products: Big Shot Plus machine.

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 10” x 7”, score at 5” along the long side and fold to create a base card of 5” x 7”.  Cut a piece of gold cardstock 5” x 7” and adhere to the front of the card. Cut a piece of green pattern paper 4 7/8” x 6 7/8” and adhere to the front of the gold card. Cut a piece of Deluxe Flower Shaping Paper 4 5/8” x 6 5/8” and adhere to the front of the green paper. Cut a piece of pink pattern paper 4 1/2” x 6 1/2” and adhere to the front of the white cardstock.

Die cut the base of the gate using the No. 1 die from the HCD2-7350 Royale Gateway Die from pattern paper. Die cut two gates using the No. 2 die from the HCD2-7350 Royale Gateway Die - one from Deluxe Flower Shaping Paper and one from gold cardstock. Adhere the white gate over the gold gate slightly offsetting them and then adhere to the front of the base and then to the front of the card.

Stamp the floral frame image from the HCPC-31025 Grateful Floral Sentiment Cling Stamp Set in Jet Black ink on Iris cardstock. Colour the image with Zig Clean Colour Brush Markers and die cut the frame out using the Nos. 1 and 2 dies. Die cut another frame from Deluxe Flower Shaping Paper and adhere the painted frame over it. Trim the frame and adhere on the gate front in a circle as shown with foam squares.

Stamp the sentiment from the HCPC-31024 Friend Floral Sentiment Cling Stamp Set in Picked Raspberry ink on Deluxe Flower Shaping Paper and die cut with the coordinating die. Die cut two more plain sentiments from Deluxe Flower Shaping Paper and then stack the three sentiments together with the stamped image on top and then adhere to the centre of the gate.

Stamp the leaves from the HCPC-3887 Wild Aster Cling Stamp set in Olive ink on Deluxe Flower Shaping Paper. Colour the images with Leaf Green and Vivid Chartreuse ink and die cut with the coordinating die. Colour the backs of the leaves with Vivid Chartreuse ink and shape using a golf tool. Adhere the leaves on either side of the gate.  

Stamp the leaf filler image from the HCPC-31022 Iris Garden Accents Cling Stamp Set in Olive ink on Deluxe Flower Shaping Paper.  Colour the leaves with Leaf Green ink and die cut with the coordinating die.  Adhere around the other leaves.

Stamp the filler image from the HCPC-3933 Floral Shoppe Fillers in Olive ink on Deluxe Flower Shaping Paper. Colour with Leaf Green ink and die cut with the coordinating die. Add Minne Pearl Prills to the leaves, trim and adhere to the top of the leaves as shown.

Stamp the rose images from the HCPC-3906 Small Wild Rose Cling Stamp set in Magenta Hue ink and die cut with the coordinating dies. Colour the petals with Rosey Posey, Cactus Flower and Plum inks and the backs with Rosey Posey ink. Shape using the coordinating mold. Assemble the flowers using two petals the same size and one petal smaller. Pierce the centres of the flowers and insert three dark pink bead wire stamens and adhere using a hot glue gun.  Trim the wires and adhere over the leaves with a hot glue gun.

Stamp the small floral images from the HCPC-3931 Large Floral Urn in Leaf Green ink on Deluxe Flower Shaping Paper. Colour the images with Sunflower and Leaf Green inks and die cut with the coordinating die. Trim and adhere to above  the roses.

To finish, add Crystal Clear glitter to the leaves and flowers using clear gloss gel medium and a paintbrush. Add Ultrafine Crystal glitter to the sentiment and butterflies with Dries Clear glue.

Other Products: Iris cardstock, clear gloss gel medium, paintbrush, Distress Oxide ink - Picked Raspberry, Ranger Archival ink - Rosey Posey, hot glue gun

Instructions:

Create a 5 x 7 inch card base in white cardstock. Cut a 4.5 x 6.5 inch piece of green paper from the Floral Sentiments Paper Collection and adhere. Cut out the Ornate Flourish Gateway Die in white cardstock and adhere, cut out the center pieces in yellow designer paper and adhere.

Stamp the sentiment from the Friend Floral Sentiment Cling Stamp Set in Jet Black and cut out with coordinating die, color in the word ‘friend’ with pink marker. Cut out the word ‘Special’ from the Special Floral Sentiment Die in black and Luxe Gold cardstock, adhere offset.  Adhere the sentiment to the center of the card as shown in photo.

Stamp the dragonfly from the Decorative Dragonfly Cling Stamp Set in Jet Black two times, color with Zig Markers and cut out with coordinating die, add 3-D Crystal Lacquer and adhere the two together on the body, adhere to the bottom left side of card.

Stamp the Classic Rose Cling Stamp Set in Vivid Fuchsia, cut out with coordinating dies, sponge with same and sculpt with the 3D Rose Shaping Mold, add glitter.

Stamp the leaves from the Leafy Accents Cling Stamp Set in Olive, cut out with coordinating die and sponge with Vivid Chartreuse.  Sculpt with Leafy Accents Shaping Mold.

Adhere leaves and flowers as shown.  

Other Products: White cardstock

Instructions:

Create base using outside Fancy Classic Rectangle Frame Die cut two pieces from white cardstock, glue it together on the top. Using frame die cut from paper collection paper and place into card using Foam Strips for dimension. Cut frame from silver paper and place onto the card using adhesive foam strips. Cut out the smaller frame from paper collection and silver paper. Place on the top of card using adhesive foam strips.

Stamp Special Floral Sentiment Cling Stamp Set on the white paper using using Ranger Archival Ink Pad - Jet Black and cut using the coordinating dies. Sprinkle Circa Embossing Powder - Iridescent and melt using heat tool. Shadow background sentiment using pencils. Colour with pencils. Place onto the card using adhesive foam strips.

Other Products: Circa Embossing Powder - Iridescent, Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine, pencils

Instructions:

Score a 10" x 5" piece of Deluxe Flower Shaping paper at 5" and fold at the score line to create a 5" x 5" card base. Use Tim Holtz Mini Stencil set 25 to ink the right and bottom edges of the card base using Seedless Preserve Distress ink and Oval blending brushes.

Stamp the images from Iris Garden Accents Cling Stamp Set on a piece of white cardstock using Jet Black Archival ink. Ink the areas in between the images using TWC Mini Tiny Circles stencil, Seedless Preserve Distress ink and Oval blending brushes. Draw a border on the edge of the cardstock with black marker. Adhere it on the card base at an angle as shown and trim off the extra hanging off the edge of the card base. 

Die cut 2 sets of HELLO from white cardstock using the die from Letters and Numbers Die. Adhere both the sets together and then adhere it on the card base as shown. Apply a layer of Gloss white Nuvo drops on the sentiment to add finishing touch.

Other Products: Seedless Preserve Distress ink, black marker, TWC Mini Tiny Circles stencil, Tim Holtz Mini Stencil set 25 and Oval Blending brushes.

Instructions:

Other Products: Die cutting machine cut'n boss, water mister, hot glue gun, ribbon,

Instructions:

Accordion card size is 4 1/4 x 5 1/2”. Score and fold 8 1/4 x 5 1/2” white cardstock at 2 1/8” (mountain fold), 3 1/8” (valley fold), 5 1/8” (mountain fold) and 6 1/8” (valley fold). Cut Lovely Lipstick cardstock 2x to 2 7/8 x 5 1/4”, cut white cardstock 2x t 2 5/8 x 5” and one more at 1 3/4 x 5 1/4”. Cut a strip of yellow paper from the Hollyhock Garden Paper Collection 1 1/4 x 5”. Dry emboss one of the white 2 5/8 x 5” layers and the yellow layer using any embossing folder. Adhere the white embossed layer to one of the colored cardstock panels and adhere to the card front. Adhere the second white layer to the colored cardstock layer and adhere the yellow embossed strip to the right side of the white panel. Stamp the sentiment ‘For My Friend’ from the Just for You Sentiments Cling Stamp using Lovely Lipstick ink set on the left side of the panel. Stamp the sentiment ‘I appreciate you so much’ from the Thank You Sentiments Cling Stamp set using Lovely Lipstick ink on the 1 3/4 x 5 1/4 white cardstock and adhere to the inside of the card. Stamp the ‘thank you’ sentiment from the Thank You Sentiments Cling Stamp set on white cardstock using the same ink and diecut using the smallest arrow die from the Arrows and Banners Die set. Diecut the next size arrow from Lovely Lipstick Cardstock, trim and adhere behind the white arrow. Adhere to the top of the card front as shown using dimensional squares.

Stamp the stem from the Hollyhock Fence Cling Stamp set on white cardstock using Memento Tuxedo Black ink, color using Stampin’ Blend markers Light Granny Apple Green and Light Lovely Lipstick, diecut with the coordinating die and lightly shape using the Deluxe Flower Shaping Kit. Add a dot of glue in the flower centers and sprinkle with You Had Me at Yellow prills. Sponge with dries clear adhesive and sprinkle with Rajni Chawla’s crystal clear glitter. Adhere to the yellow designer paper using dimensional squares and dries clear adhesive. 

Stamp the Hollyhock Petals & Leaves on Deluxe Flower Shaping paper using Lovely Lipstick and Leaf green inks, color with the same inks and diecut using the coordinating dies. Color the backs of the flowers, too. Place the flowers and leaves in the Hollyhock Shaping Mold and run through the diecut machine. Pierce the flower centers using the Groove Golf tools and add a yellow stamen to each flower, secure with hot glue. Sponge with dries clear adhesive and sprinkle with crystal clear glitter. Adhere the flowers to the leaves and adhere to the card front using hot glue.

Other Products: White Cardstock, Lovely Lipstick Cardstock, Dimensional Dots, Hot Glue Gun, Funnel Tray, Diecut Machine, Paper Trimmer, Misti, Stampin Blend Markers – Light Lovely Lipstick and Light Granny Apple Green, Lovely Lipstick Ink, Misti,

Instructions:

Cut a piece of white card stock measuring 11” x 4 1/4” and score at 5 1/2 to create a top folding card base. From sheet 1B cut a piece that measures 4 1/4 x 5 1/2” from the HCDP1-2138 Decorative Dragonfly Paper Collection. Glue this piece onto the card base. Now cut a piece from sheet 3A and a piece from sheet 11B both to measure 3 3/4 x 5”.  Set aside.

Using HCPC-31024 Friend Floral Sentiment Cling Stamp Set Stamp out the large stamp onto Copic X Press It paper using Memento Tuxedo Black Ink. Color in with Copic markers then die cut using both the outer and inner coordinating dies. Once die cut, place the frame on top of the previously cut piece of sheet 3A (green) paper and line up the center die and tape in place. Run this through a die cut machine to form a window. Take a piece of acetate and glue to the back of this opening. Add foam tape all around the opening and the back of this piece. Now using Deep Purple Archival Ink stamp the large sentiment again onto the piece of 11B that was previously cut. This piece will be glued down to the card front and sequins  are to be sat on top of the sentiment. Lightly dust the inside of the back side of the window before removing the backing of all the foam tape to prevent static. Then place down on top of the sequins to trap them inside the shaker window. 

Next Glue the Copic colored frame to the front of the window making sure to line up all the edges. Stamp out the larger stamp from the HCPC-31017 Feathery Florals Cling Stamp Set in Library Green Archival Ink onto Deluxe Flower Shaping Paper. Color the green leaves using Stack and Store Daubers along with Viridian and Library Green inks. Shape a little from the back using the Deluxe Flower Shaping Kit. Cut off all the foliage from this floral spray to be used under our flowers on this card.

Stamp the Roses 3x in Deep Purple Archival Ink from HCPC-3906 Small Wild Rose Cling Stamp Set. 3 medium and 4 small flowers will be needed to complete the card. With a makeup sponge applicator brush, ink the centers lightly with Tea Rose Archival Ink and then cut with coordinating dies. Using the Stack and Store Daubers ink the edges of each petal with Blue Violet Archival ink and run through the coordinating 3D Mold. Using the Deluxe Flower Shaping Kit use a circular motion with the stylus tool and press down into the center of each petal center. Lastly poke a hole in the center of each flower using the Grooved Golf Tools. For the Large Flower alternate 3 petals and use the Medium Pastel Stamen in the center. Using hot glue, glue in place. For the smaller flowers alternate 2 petals and use the Small Pastel Stamens and also secure in place with hot glue.

Now simply arrange the florals and foliage at opposite corners to finish up the card. Finish off the inside with a beautiful piece of paper from the Decorative Dragonfly Paper Collection for a gorgeous coordinating look.

Other Products: Nida Tanweer Magic glitter, Copic Markers, Copic X Press It Paper, 3D Foam Tape, Sequin Mix, Blue Violet Archival Ink, Library Green Archival Ink, Blender Brushes,

Instructions:

Make a card base that is 7" x 5" inches from white cardstock. Add a mat layer of luxe gold cardstock measuring 6 3/4" x by 4 3/4" and add to the crd front. Cut a piece of pattern paper from paper collection, that is a little smaller than the gold mat layer and adhere to the card front.

Cut one piece each of white and gold paper from the Delicate  daisy Corner and border dies. Add the white piece on the gold piece offsetting a little. Adhere on the card a little towards the base.

Cut a piece of gold die cut from the scalloped circle die. Cut another piece of pattern paper circle with birdhouse design using the small basic circle die. Add this circle on the scalloped die and adhere on the card.

Stamp the Iris flower with Majestic Violet ink and sunflower ink on Deluxe Flower Shaping paper. Colour the flowers with Archival inks using Daubers. Cut with matching die and shape the flowers in the flower shaping mold.

Stamp the Iris flower bouquet image on Deluxe flower shaping paper with Jet black ink and colour with Zig markers. Cut with matching die. 

Arrange all the flowers and leaves and coloured image on the card using hot glue and designer dries clear glue.

Stamp the sentiment from the Grateful Floral sentiment stamp set. Cut with matching die and add on the scalloped circle die cut.

Other Products: Scoring board, hot glue gun and sticks, artificial moss, die cutting machine.