Instructions:

The ready-top fold card measures 8″ by 6″. To prepare the white card base, cut one piece measuring 8″ by 6″ and the second piece 8 1/2″ by 6″. Score the second piece at 1/2″ on the longer side and glue the first piece on top. For the topmost layer, choose a teal color cardstock matching the designer paper collection and cut 71/4″ by 5 1/4″. Next, cut a coordinating paper from the designer paper collection, 1/16″ smaller on all the sides, and layer it on the card front using foam tape.

For the top layer, choose the paper from the designer paper collection and cut it 1/4″ smaller than the main card front so that it shows a white border all around, Mat a golden layer behind making a delicate golden border of 1/16" all around.  

Cut 2 pieces, one each in white and Luxe gold cardstock, using Flourish Companion Frame Die and gluing them together to add some extra strength to the big frame. Next, cut the shadow die in red pattern paper and glue the prepared frame on top as shown. Also, cut a frame using the Fancy Classic Oval Frame Die set and layer it on the card front using foam dots. Using the same die set, cut the oval from the coordinating paper and glue it in the center. 

Stamp the required image using versamark sticky ink and sprinkle gold heat embossing powder, Dust extras, and heat set the images. Cut the image using its coordinating dies and color it using Zig Clean Clear Brush Markers. Glue extra die cut on the back for extra strength. Layer the ready-painted image on the card front as shown. 

Gold heat emboss 2 small Poinsettia petals on vellum cardstock and cut them using its coordinating die set. Shape the flower using a flower shaping kit and glue it on the top of the card along with 1-2 stamped and die-cut holly berry foliage. 

Other Products: Smooth white cardstock, Score Board, Die Cutting machine, Tacky glue, Glossy Accent, Foam Tape, Adhesive that dries clear, versamark

Instructions:

Ready side fold card measures 5.5" × 7.5". First, cut a mat from designer paper collection measuring 5.25" × 7.25". Adhere it on ready card base. Further, cut another mat from designer paper collection measuring 4.75" × 6.75", adhere it on white cardstock measuring 5" × 7". Cut from center to make a frame which is 1" wide from all four sides using trimmer. Cut gold and white cardstock using Slim Star Lattice Rectangle Die. Arrange both pieces and glue it from the back side of the second mat. Adhere this mat on card using dimensional tape. 

Stamp ornament images on watercolor paper using versamark and heat emboss using gold embossing powder. Paint using zig markers and cut with coordinating dies. Stamp poinsettia flower on deluxe flower shaping paper using red geranium and cut with coordinating die. Paint flowers using red geranium and vermillion ink. Shape flowers using shaping mold. Slightly shade flower edges with gold ink. Layer flowers and add prills to the center of flower using hot glue. Stamp some leaves and other elements on deluxe flower shaping paper using black archival and paint using zig markers. Cut with coordinating dies. Arrange all elements on card using hot glue and add some pearls as pictured.

Cut sentiment from designer paper and distress edges with vermillion ink. Glue it on card. 

Other Products: Smooth White Cardstock, watercolor paper, versamark

Instructions:

Card size: 3 1/2" x 8 1/2". Cut white slim card to measure 3 1/2 x 8 1/2" when folded, (7 x 8 1/2 piece"). Die cut a piece of red decorative paper with largest Slim Eyelet Rectangle then glue to card.

Die cut green decorative paper and red decorative paper with Slim Basic 2 5/8 x 6 3/4" then cut gold Slim Eyelet to mat. Cut another piece of gold the size of the green and the red. Glue the red decorative paper onto the gold eyelet panel. Die cut the green piece and the gold piece with the Curvy Decorative, glue them together off-set then pop up onto red panel.

Stamp ornament line, holly and berries x4-5 and sentiment on white using embossing ink, heat emboss with gold powder. Die cut, color, add gold glitter pen.

Stamp greenery 5-6 times on dark green decorative paper using English Ivy, die cut, cut apart in some places. Arrange holly, greenery and ornaments on card. Stamp 2 smallest poinsettia on Deluxe Flower Shaping Paper using Vermillion, sponge with Carnation Red, die cut, sponge edges again plus back sides then form in the shaping mold. Glue the 2 together then insert gold stamen. Glitter. Attach poinsettia to arrangement at top left corner.

Cut a gold mat for the sentiment with sentiment die, glue the sentiment on top then pop up on right lower corner.

Add 3 gold half balls onto right side.

Other Products: White cardstock, embossing ink, Copics: R43, R24, RV29, YG05, YG07, gold glitter pen, gold half balls

Instructions:

Cut out a 5 1/2" x 5 1/2" white paper base, then cut a slightly smaller square from your paper collection and glue it to the base. Next, cut a 5 1/4" x 5 1/4" square from the gold paper, then cut a slightly smaller square from your paper collection and glue them with Double Dots 100pc. - 3D Foam.

Cut two a 3 1/4" x 4 1/4" rectangles out of gold paper, then cut out two slightly smaller rectangles from your paper collection and glue them with Double Dots 100pc. - 3D Foam.

Stamp the baubles from the Sparkling Holiday Ornaments set on white paper with embossing ink, then dust with gold powder and heat with the embossing heater. Cut with the coordinating die. Color with watercolor markers Cut the bauble shape out of the gold paper and glue it underneath and glue to the card. Cover baubles with 3D Crystal Lacquer

Stamp the pieces from the Christmas Holly Accents set with embossing ink then sprinkle with gold powder and heat with the embossing heater, then cut out with matching dies and color with watercolor markers.

Arrange everything as pictured.

Other Products: Embossing ink, cutting machine, watercolor markers

Instructions:

Create a 5 x 7 inch card base in white cardstock. Cut the outer frame with the Royal Elegance Frames Die in green paper from the Holiday Ornament Paper Collection and in Luxe Gold, adhere together offset to create a gold shadow and adhere with foam tape. Cut the decorative center die in white and Luxe Gold card stock and adhere offset and adhere to center of card front with foam tape. Cut out an Eyelet Oval and Basics Large Die in green patterned paper from the paper collection and adhere with foam tape.

Stamp the ornament string from the Sparkling Holiday Ornament Cling Stamp Set in Jet Black on white cardstock, cut out with coordinating die and sponge with Vivid Chartreuse, Lady Bug and Sunflower, accent with Zig Markers and add glitter.

Cut out the sentiment from the paper collection with the Eyelet Oval and Basics Large Die and cut another in Luxe Gold, adhere together offset and adhere with foam tape as shown.

Stamp the poinsettias from the Large and Small Festive Poinsettia Cling Stamp Set in Vivid Chartreuse and Lady Bug, sponge with same, cut out with coordinating dies and sculpt with the Large and Small Poinsettia Shaping Mold, add stamens and Frosting Powder.  

Stamp the holly leaves from the Small Festive Poinsettia Cling Stamp Set in Olive, sponge with Vivid Chartreuse and cut out with coordinating dies, sculpt with shaping mold and add Frosting Powder.

Stamp the pine branches from the Winter Wreath Accents Cling Stamp Set Jet Black, cut out with coordinating dies and sponge with Vivid Chartreuse and sculpt with stylus.

Adhere poinsettias, ornaments, branches and holly as pictured.

Other Products: White cardstock

Instructions:

Create base using outside Flourish Companion Frame. Die cut two pieces from white cardstock, glue it together on the top. Using same die, cut from collection paper and place into card using Foam Strips for dimension. Cut smaller frame from paper and adhere to the front of the shaped card using Adhesive Foam Strips.

To create flowers, stamp the Christmas Poinsettia & Holly Cling Stamp Set on white paper with Jet Black Archival ink and die cut using the coordinating dies. Colour the poinsettias with StazOn Black Cherry using a sponge dauber. You will need three petals for each flower, using assorted sizes. After colouring, place the flowers and leaves into the mold face down and run through cutting/embossing machine. Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal Clear glitter. Pierce the center and glue in some stamens using hot glue gun.

To Create the leaves, stamp Christmas Poinsettia & Holly Cling Stamp Set with Jet Black Archival ink and color using Ranger Archival Ink Pad - Olive and cut using the coordinating dies. Place the leaves into the mold face down and run through cutting/embossing machine. Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Stamp ornament with Sparkling Holiday Ornaments Cling Stamp Set onto collection paper using with EMBOSS - Embossing stamp pad - Clear and sprinkle with Embossing Powder - Gold 359760 and heat using heating gun. Cut using the coordinating dies. Place on the top of card using adhesive foam strips.

Fussy cut a sentiment ticket from paper collection and place onto the card using adhesive foam strips. Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine, EMBOSS - Embossing stamp pad - Clear

Instructions:

My finished card size is 4 1/4" x 5 1/2". Make card base and cover with a piece of sheet 3B of the paper collection. Set Aside.

Using various dies from the Rectangle Fillagree Die set cut out of the Flower Shaping paper and also out of the Luxe Gold Cardstock. Glue the larger die cut to the card front and then cut another shape from the set using a piece of sheet 9B of the paper collection and glue that to the inside of the larger piece. Next, cut two pieces of the next smallest die using white and gold cardstock then glue together with the gold piece showing through from the back. Glue this to the card front.  

Stamp the ornament onto watercolor paper using Memento Bamboo Leaves ink and then emboss with gold embossing powder. Use the Zig markers and the waterbrush to color the ornament and allow to dry. Die cut with coordinating die. Use 3D Crystal Lacquer to cover the ornament and give it a pretty shine. Allow this to dry.

Cut a piece of white ribbon and tie a bow and make a hanger to hold the ornament.  Hot glue to hold into place. The card is finished.

Other Products: Die Cut Machine, Gold Embossing Powder, White Cardstock, Canson Watercolor Paper, White Ribbon, Hot Glue Gun

Instructions:

Create a top fold card from a smooth white card stock measureing 5 1/2” x 7 1/2”. Choose the designer paper from Holiday Ornament Paper Collection and cut to size measuring 5” x 7”. Next, mat this paper on Luxe Gold Card stock creating a thin border on all the sides. Mat this ready panel on white card base using glue

Cut a border die cut with a die from Filigree Border & Accents Die from the white card-stock and Luxe Gold card-stock. Stack both die cuts together slightly offset. Adhere it on the card  base using foam tape.

Choose and stamp the images from Noel Holiday Ornaments Cling Stamp Set and Sparkling Holiday Ornaments Cling Stamp Set on smooth white card-stock using versamark ink, heat emboss using golden embossing powder and paint them using Zig Clean Clear Brush Markers. Cut all the images using their coordinating dies. Now stamp the lantern image from Christmas Lantern Cling Stamp Set on a smooth watercolour paper using Versafine pigment ink. Paint the image using Zig Clean Clear Brush Markers. Cut this image using coordinating die. Stamp the sentiment from Christmas Holly Accents Cling Stamp Set on a white card-stock using Library Green Archival Ink and die cut it using coordinating die. Cut a die cut from luxe gold card stock using same die and adhere it behind the sentiment image a little offset.

For the flowers, stamp flower images from Christmas Poinsettia & Holly Cling Stamp Set on the Deluxe flower shaping paper using Lady Bug Memento ink. Color them using same ink. Stamp the leaves from same stamp set on Deluxe Flower Shaping paper with Olive Archival  ink and color them using Leaf Green and Olive Archival ink. Cut the flowers and leaves using their coordinating dies and shape them using coordinating 3D shaping mold. Now add Go Man Go prills to the centre of flowers.

Once all the elements are ready, assemble the card as shown. For final look, apply Crystal Clear powder to the flowers using Art glitter dries clear glue.

Other Products: Die Cutting Machine, Score Board, Bone Folder, Smooth White Cardstock, Scissors, Double Sided Tape, Tacky Glue, Funnel Tray, Versamark Ink and Heat Gun

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 10 1/2” x 7 1/4”, score at 5 1/4” along the long side and fold. Die cut the shaped card using the outline die from the HCD2-7383 Simply Classic Rectangle Die set with one edge slightly over the fold to create the hinged shape card. Die cut a piece of green pattern paper using the outline die from the same die set and adhere to the front of the card. Die cut a frame using the outline die and the plain rectangle die out of pattern paper. Die cut the decorative die from the HCD1-7246 Fanci-fold Pocket & Accent Die out of gold cardstock and adhere behind the frame. Adhere the frame to the front of the card with foam tape. Die cut the decorative frame from gold cardstock using the No. 2 die from the HCD2-7383 Simply Classic Rectangle die set and adhere to the frame. Inlay the gold accents as shown.

Stamp the ornaments from the HCPC-31030 Sparkling Holiday Ornaments Cling Stamp Set and the HCPC-31031 Noel Holiday Ornaments Cling Stamp Set in Tuxedo Black ink on alcohol marker friendly paper. Leave the stamps in on the stamp positioner and colour the images with alcohol markers and then stamp again with Versamark ink and heat emboss with gold embossing powder. Die cut with the coordinating dies, add Wink of Stella to the ornaments and then add 3D Crystal Lacquer. Die cut another set of plain dies and adhere the coloured images to the top and add the larger ornament set at the top of the card. Add smaller ornaments under the gold decorative die as shown.

Stamp the birdie images from the  HCPC-31027 Festive Berry & Birdies Cling Stamp Set and the HCPC-31028 Christmas Holly Accents Cling Stamp Sets in Tuxedo Black ink on alcohol friendly paper. Colour with alcohol markers and die cut with the coordinating dies. Die cut another set of dies from Deluxe Flower Shaping Paper and adhere behind the coloured images. Add the birdie images over the large ornament decoration with foam squares as shown. Add a small birdie to the bottom left of the frame.

Stamp the sentiment from the HCPC-31026 Christmas Lantern Cling Stamp Set in Versamark ink on Deluxe Flower Shaping Paper and heat emboss with gold embossing powder. Die cut with the coordinating die and adhere the sentiment to the bottom left of the card inside the frame.

To finish, add Crystal Clear glitter to the birdies with clear gloss gel medium with a paint brush. Add gold gems around the sentiment.

Other Products: Clear gloss gel medium, paint brush, Pink Fresh Studio Gold Pearls, Copic Markers - Green YG67, G)7, YG231, YG03, Red R59, R29, R22, Yellow Y38, YR12, Y06, Versamark ink, Neenah Classic Crest 80 Ib cardstock, Clear Wink of Stella, foam squares, foam tape

Instructions:

Card size is 6 x 6”. Score and fold 12 x 6” Deluxe Flower Shaping Paper at 6” on the long side to create a tent fold card base. Cut Luxe Gold cardstock 2x to 5 7/8 x 5 7/8”. Cut sheets 8B (green) and sheet 11A (plaid) to 5 3/4 x 5 3/4” and ink the edges using Archival English Ivy ink. Trim the card front from sheet 1A to 5 1/8 x 5 1/8” and ink the edges using Vermillion ink. Using removable tape, adhere a gold mat layer, the green layer and the 5 1/8 square layer to the card front. Using the largest Circle Basics Large Die, diecut the circle from the center of the card front to create an aperture. It won’t cut through all the layers at once but the die will leave a nice impression so you can go back and cut through whatever layers didn’t cut the first time. Using the largest Eyelet Circle & Basics Small Die and the second largest Circle Basics Large Die, cut a border from Luxe Gold cardstock.

Stamp the ornament from the Noel Holiday Ornaments Cling Stamp Set on Luxe gold cardstock using VersaMark ink, cover with WOW Metallic Gold Sparkle Embossing glitter and heat set using the Heat it tool. Diecut using the coordinating die and diecut a second time from Deluxe Flower Shaping Paper. Adhere the layers together, add a gold cord to the top and adhere to the card front with hot glue in the center of the aperture. Adhere the gold, green and card front layers together and adhere to the card front. Adhere the eyelet gold border. Adhere the other gold layer behind the plaid layer and adhere to the inside of the card.

Stamp the Small and Large Festive Poinsettias on red cardstock using VersaMark ink, cover with WOW Metallic Gold Sparkle Embossing Glitter and heat set. Diecut using the coordinating dies and shape in the coordinating molds. Use the stylus to press down in the flower centers, offset two flowers and adhere together using hot glue to create two small and one medium flowers. Add a little hot glue to the flower centers add cover with Gold Gala Glitz. Stamp the image from the Holly Berry Cling Stamp set 2x on Luxe gold cardstock, cover with the WOW Embossing Glitter, heat set and diecut using the coordinating die. Use the deluxe Flower Shaping Kit to add shape to diecuts. Adhere the flowers and holly berry diecuts to the bottom left of the card front.

Stamp the ‘Merry Christmas’ sentiment from the Christmas Lantern Cling Stamp set on Luxe gold cardstock using VersaMark ink, cover with WOW Metallic Gold Sparkle Embossing glitter and heat set using the Heat it tool. Diecut using the coordinating die and then diecut 3 more times and adhere the layers together to create dimension. Adhere to the top of the card using dries clear adhesive. 

Other Products: Diecutting Machine, Hot Glue Gun, Versamark Ink, WOW Metallic Gold Sparkle Embossing Glitter, Gold Cord, Misti Stamp Positioner, Paper Trimmer, Gold Gala Glitz

Instructions:

Create card base using die HCD2-7308 Majestic Swirl Frames Die on white cardstock. Using same die cut it on pattern paper from HCDP1-2153 Holiday Ornament Paper Collection. From same die set cut intricate die on pattern paper from HCDP1-2153 Holiday Ornament Paper Collection, as shown, adhere it using foam tape. Cut another layer on white cardstock and luxe gold cardstock, adhere them together a little offset using designer dries clear adhesive and then adhere it on card using foam tape.

Stamp ornament images from HCPC-31031 Noel Holiday Ornament Cling Stamp Set on white cardstock using archival ink-mulberry, cut it with coordinating HCD1-7467 Noel Holiday Ornaments Die, randomly color it using archival ink-carnation red and add crystal clear glitter using designer dries clear adhesive. Adhere these ornaments as shown.

Stamp Holly leaves from HCPC-31028 Christmas Holly Accents Cling Stamp Set on white cardstock using archival ink-mulberry, cut it with coordinating die HCD1-7464 Christmas Holly Accents Dies, color randomly using archival ink-carnation red and English ivy, add randomly crystal clear glitter, adhere them using glue gun.

Stamp sentiment from HCPC-31026 Christmas Lantern Cling Stamp Set on white cardstock using archival ink-mulberry, cut it with coordinating die HCD1-7462 Christmas Lantern Dies, adhere it using designer dries clear adhesive as pictured.

Other Products: Big Shot plus machine, Glue Gun.

Instructions:

Take a 5" x 7" tent fold card blank cover with green paper from the Holiday Ornament Paper Collection, cut to 4 3/4" x 6 3/4". Adhere with Designer Dries Clear Adhesive. Die cut the inner and outer edges of the Courtyard Elegance Die in white card. Adhere to card front. Die cut the 4" circle from the same die set in green paper from the Paper Collection. Adhere. Die cut another 4" circle from the Eyelet Circle & Basics Small Die Set in white card. Adhere to the green circle. Die cut a 3.75" circle from the Circle Basics Large Die Set in red paper from the Paper Collection, adhere. Die cut a 3.5" circle from the Eyelet Circle & Basics Small Die Set in white card, adhere. 

Stamp onto Deluxe Flower Shaping paper, in Ranger Archival Jet Black Ink, the Noel Holiday Ornaments Cling Stamp Set. Die cut with the matching dies. Stamp again onto green paper from the Paper Collection, using Versamark Embossing ink. Add black embossing powder and dry with a heat tool. Die cut with the matching dies. Adhere the green Holiday Ornaments to the white Holiday Ornaments using foam tape. 

Cut seven thin strips of Luxe Silver Cardstock, adhere to each Ornament. Adhere the largest Ornament with foam tape to the centre of the card. Adhere the other Ornaments with Dries Clear Adhesive, in a row across the card. Add silver gems to each Ornament. Die cut the outside edge of the Stairway Gardens Die, in Luxe Silver Cardstock. Use the outside edge only, adhere to card front. Adhere a silver bow with hot glue to the corner of the card. Adhere the Noel Ornament to the bow with hot glue. All done.

Other Products: 5" x 7" card blank, white card, Versamark Embossing ink, black embossing powder, heat tool, foam tape, silver gems, silver bow, hot glue.

Instructions:

Stamp the ornament Image on the Luxe Silver Card using versamark embossing ink, cover it with silver embossing powder and heat it using heating tool. Die cut with coordinating dies, place the inside cutting die on this shape and die cut the inside part of ornament.

Die cut the shadow die on the silver glitter card and adhere the silver embossed ornament shape on this glitter shape using clear glue. Decorate it with rhinestones.

Stamp the sentiment from Celebrating you stamp set on the golden card using versamark embossing ink cover it with silver tinsel embossing powder and heat it using heating tool. Trim and add silver card under to make a border, add this tag using dimensional tape.

Add ribbon on the top.

Other Products: Dimensional Tape, Silver Tinsel Embossing Powder, Versamark Embossing Ink, ribbon, Rhinestones.

Instructions:

Cut a piece of white card stock measuring 11 x 7 1/2” and score at 5 1/2” for a top folding landscape card base. Cut a piece of purple card stock to 5 1/2 x 71/2 ” and ink the edges using the HCDA1-449 Stack and Store Daubers along with Deep Purple Archival Ink. Adhere to the front of the card base. Now Cut a piece of Luxe Silver Card Stock to 5 1/4 x 7 1/4” and attach; followed by a piece from Sheet 6A from the HCDP1-2138 Decorative Dragonfly Paper Collection. Before attaching the Dragonfly paper, ink the edges with Night Sky Archival Ink. Next, using the HCD2-7424 Rectangle Filigree Frame Dies, cut the largest die 3x, first from white card stock, second from Luxe Silver Card Stock, and lastly from Sheet 5A (From sheet 5A only the inner die cut piece will be used). With the second smallest frame set cut 2x from both white and silver, and from the inside frame outline die cut from sheet 3A. Ink edges of the Dragonfly papers with ink colors (Deep Purple, Night Sky, Leaf Green). Layer as shown making sure to offset the silver layers behind the white layers and using foam tape behind the inside frame. For the sentiment layer, use the HCD2-7351 Iron Work Sentiment Dies and cut 3x, once from Luxe Silver, once from white card stock, and once from sheet 5A. Ink the 5A layer a little with Deep Purple ink to darken it a little. Layer the sentiments so that the purple and white layers are exactly on top of each other and the silver is slightly on top. (Designers Note: The dates added below the Thank You sentiment are the years this designer has actually been on the Heartfelt Creations Design Team, and this card is to commemorate that. “Thank You Heartfelt for a beautiful journey”.)

Stamp out 8 medium and 2 large Climbing Clematis Flowers onto HCPP1-475 Deluxe Flower Shaping Paper using the HCPC-3954 Climbing Clematis Cling Stamp Set using Distress Oxide Wilted Violet Ink. Color using a blending brush and Majestic Violet Archival Ink. Die cut with coordinating dies and run through the coordinating 3D mold. Using the HCST1-401 Deluxe Flower Shaping Kit press the centers of the flowers and pierce the centers to add HCS1-459-4 Rock Candy Stamen. Secure with a glue gun. Now stamp the HCPC-3816 Lush Lilacs Cling Stamp Set 1x onto Deluxe Flower Shaping Paper with Night Sky Archival Ink. Color using French Ultramarine Archival Ink and die cut using the coordinating die. Ink the tips of the flowers with Night sky before running the flowers through the coordinating 3D flower mold. Now using the Flower Shaping Kit, press the centers with the smaller ball tools. Using a small golf tool pierce a tiny hole into the center of each flower and thread thru 1/2 of a pastel pearl stamen small and secure to the back with a drop of glue. To finish the flowers, simply add Nida Tanner’s Magic Glitter Powder by adhering it with Dries Clear Glue and a Hydra Sponge. Lastly, for the leaves create these by stamping the HCPC-3835 Leafy Accents in Olive Archival Ink and coloring it in with Leaf Green. Die cut with the coordinating dies. Before running the leaves through the 3D mold ink the edges of the leaves with Olive ink. Once the leaves are shaped all there is left to do is to arrange the beautiful corner arrangements. Cut a piece of coordinating paper from the Decorative Dragonfly Collection to complete the inside of the card. 

Other Products: Purple Card Stock, Distress Oxide Wilted Violet, 3D Foam Tape, Glue Sticks, Glue Gun, Scissors, Paper Trimmer, Die Cut Machine

Instructions:

To make the card base, cut a piece of white cardstock of size 8 x 10 inches, scored and folded at 6 inches to create a base of 8 x 6 inches on one side and the other panel is 8 x 4 inches. Cut pattern papers from HCDP1-2149 Feathery Florals Paper Collection to 1/8 inch less than each of the sides and adhere them on the corresponding panels.

Again, cut another piece of white cardstock with size 5 x 5 1/2 inches. Adhere this piece to the center of the card opening towards the opposite side, like a gate fold. Cover the sides of this panel as well with pattern papers. Using the dies from HCD3-7442 Curvy Decorative Border Die set, cut 2 pieces each of the decorative borders on white cardstock, stack and glue them together. Adhere these to the front flaps of both the panels along with a small border of Gold cardstock. Cut 4 pieces each of Gold and white cardstock with the border die from HCD1-7263 Swirly Accent Spray Die, stack 1of each together with the Gold die-cut on top and adhere these to the corners of the front panel. 

Add the sentiment from HCPC-31007 Friendship Sentiments Cling Stamp Set with Majestic Violet ink onto a piece of 4x4 inch White cardstock. Sponge the edges with Majestic Violet ink and adhere this to the inner most panel. Stamp and heat emboss the image from HCPC-31016 Ornate Window Cling Stamp Set onto Gold cardstock with blue glitter embossing powder and cut using the coordination dies, along with a few blank pieces of white cardstock. Stack and glue the die-cuts together keeping the embossed Gold piece on the top. Cover the window area with a small piece of vellum. Adhere this ready panel to the small front panel using dimensional tape. 

Stamp the images from HCPC-3983 Decorative Dragonfly Cling Stamp Set and HCPC-31019 Floral Feathers Cling Stamp Set onto White cardstock with Cactus Flower ink and color the images using Cactus Flower and Paradise Teal inks. Stamp the flower images from HCPC-3954 Clematis Cling Stamp Set using Cactus flower ink and the leaf images from HCPC-31011 Garden Lily Cling Stamp Set using Fern Green ink onto flower making paper. Color the flowers with Cactus Flower and Paradise Teal inks, leaves with Fern Green inks and cut all the images with their coordinating dies. 

Shape the petals and leaves using flower shaping tools. Stack and glue 2 petals each for a flower; and add small pearl stamens for the centers. Add crystal clear glitter on the flowers and leaves by sponging some dries clear glue. Similarly, add Clementine Ultrafine glitter onto the rest of the die cut images.

Complete the card by adhering all the ready elements using hot glue and dimensional tape along with few rainbow pearls around the arrangement.

Other Products: Dimensional adhesive, funnel tray, scissors, paper trimmer, scoring board, die cutting machine, Rainbow pearls, WOW embossing glitter

Instructions:

Cut a piece of white cardstock 8 x 8 1/4", score at 4" and fold to get a slim base. Cut a piece of patterned paper from the Floral Basket Paper Collection to 3 14/16 x 8 2/16". Cut out a white rectangle with die No. 3 from the Slim Eyelet Rectangle Die and a blue rectangle from the Floral Basket Paper Collection with die No. 3 from the Slim Basic Rectangle Die. Cut out a white frame with die No. 3 from the Slim Elegant Rectangle Die and a blue one with die No. 4 from the same set. Stamp the sentiment from the Special Floral Sentiment Cling Stamp Set in Forget Me Not ink and cut it out with coordinating die. Adhere all elements to the base as pictured.

Stamp the basket from the Wicker Basket Cling Stamp Set in Toffee Crunch ink, color it and cut out with coordinating die. Stamp the bird from the Christmas Holly Accents Cling Stamp Set in Tuxedo Black ink, color it and cut out with coordinating die. 

Stamp blossoms from the Iris Garden Petals Cling Stamp Set in Forget Me Not ink onto Deluxe Flower Shaping Paper. Color their edges with the French Ultramarine ink and their centers with the French Ultramarine and Forget Me Not inks, diecut with coordinating dies and shape with mold. Add Pastel Pearl Stamens small to all flowers. Stamp small blossoms from the Hollyhock Petals & Leaves Cling Stamp Set in Pink Peony and French Ultramarine inks, diecut with coordinating die and shape with mold. Add some Orange Juice Prills. 

Stamp leaves from the Hollyhock Petals & Leaves Cling Stamp Set in Fern Green ink, color them with Leaf Green ink, diecut with coordinating die and shape with mold. Stamp 6 branches from Cottage Tree 'scapes Cling Stamp Set in Fern Green ink, color them with Leaf Green ink and cut out with coordinating die. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers and branches and add some pearls.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, colored pencils, pearls, sisal

Instructions:

Prepare a 5 1/2 x 7 1/2” card base using the Flower Shaping paper. Top that with a piece of the Ornate Peacock paper 1/4” smaller.   

Use the Oval Filigree Frame die and cut the largest die from the Flower Shaping paper and adhere to the center of the card. Use the 2nd die and cut the oval out of the Ornate Peacock paper, add foam dots to the back and adhere to the card. Use the 3rd die and cut it out of the white card stock, add foam dots to the back and adhere to the card.

Stamp several leaves from the Leafy Accent set with Cottage Ivy on the Flower Shaping paper. Lightly color with the Vivid Chartreuse ink. Use the coordinating die and cut out. Highlight the edges with more of the Cottage Ivy ink. Place in the matching mold and run through the die cut machine to shape.

Stamp the Small Wild Roses on Flower Shaping paper with the Vibrant Fuchsia ink. Cut out with the coordinating die. Use the dauber to color the center of the flower with the same ink. Place in the matching mold and run through the die cut machine to shape. Use the Golf tool to out a hole in the center of each petal and add the Stamens, secure with hot glue.

Stamp the Wisteria petals on a yellow piece of paper from the Ornate Peacock paper, cut out with the coordinating die.  Use the Flower shaping tool to shape.

Arrange all the leaves and flowers on the card and secure with hot glue,

To finish the card, add glitter to all the leaves and flowers.  dd Ebony Black Crystal drops to the center of each of the Wisteria petals.  Add 3D Crystal Lacquer to the white side of the card as shown.

Other Products: Paper trimmer, Die cut machine, Hot glue and gun,

Instructions:

The finished layout measures 12 inches by 12 inches. For your background use a 11 1/2 x 11 1/2" paper #9B from Hollyhock collection paper, a 11 x 11" paper #9B from the same collection. Distress the edges with the blade of scissors and glue it on deluxe flower shaping paper. Make a sewing all around the paper. Cover it with clear gesso.  When dry, make droplet with liquid ink on your page.  (I used, twisted citron, bundled sage, abandoned coral and carved pumpkin from distress oxide). I randomly stamp in olive green words from the Friendship sentiment. 

Cut 2 other pieces of paper in the Hollyhock collection: 4 x 7 1/4" in #9B and 4 3/4 x 5 3/4" in #8B. Glue this pieces on the right of your layout and glue your picture over it with 3d foam dots to give dimension. 

Stamp your flowers from Wild Rose collection in 3 colors: French ultramarine, pink peony and bright tangelo. Stamp with ink onto white flower shaping paper and color with the same ink. Diecut with the coordinating die. Place facedown into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe Flower Shaping kit tools. Use 3 smalls layers to make your rose. Glue them together and add stamens in the center.

Stamp in olive green leaves from the Wild rose kit. Color with the same. Cut it with the coordinating die and shape with the shaping mold.  

Put cheesecloth and sewing thread on your layout next to your picture and glue your flowers and leaves over. Do the same thing at the left of your layout.

Stamp with Olive ink sentiment from Elegant Rose sentiment. Die cut with the coordinating die from the same collection. Cut 3 other times in white paper and glue them on each other to make a chipboard. Add 3D crystal clear and glue it on your picture.

Stamp with Olive ink flower from Hollyhock fence and colore it with the zig marker.  Die cut with the appropriate die from the same collection. Add 3D crystal clear and add it through your bouquet. For the final touch add lace through your bouquets.

Other Products: Die cutting machine Cut’n’boss, heat gun, water mister, hot glue gun, hot glue, scissors, cheesecloth, sewing thread, ribbon, ruler, lace, white gesso, distress spray twisted citron, crushed olive, squeezed orange, carved pumpkin,