Instructions:

Ready side fold card measures 5.5" × 7.5". Cut a mat from designer paper collection measuring 5.25" × 7.25", adhere it on ready card base. Cut another mat from designer paper collection measuring 4.75" × 6.75"and adhere it on white cardstock measuring 5"×7". Adhere it on card using dimensional tape. 

Cut a frame from white cardstock using Fancy Classic Oval Frame Die set and adhere on card using foam dots. Stamp sentiment stamp on vellum paper using versamark and heat emboss with white embossing powder. Cut it using oval die from the set. Glue it on card as pictured. Stamp angel image on white cardstock using French Ultrafine, Coffee and butter cup inks. Further, stamp it with versamark and heat emboss using sparkle platinum embossing powder. Cut with coordinating die and glue on card using foam dots as pictured.  

Stamp leaves from Winter Wreath Accents Stamp using fern green and paint with same ink. Cut with coordinating die and slightly shape using stylus. Cut some berries and pine cone images on white cardstock using coffee archival and paint using copic markers. Stamp star image on white cardstock using versamark and heat emboss using sparkle embossing powder. Cut with coordinating die. Arrange images on card and glue them as pictured. 

Other Products: Smooth White Cardstock, Versamark, Sparkle Platinum Embossing Powder, Copic Markers

Instructions:

The white card stock base measures 7 1/2 x 9" scored at 3" and 4 1/2" along the short side. Using the oval outiline die from HCD2-7382 - Simply Classic Oval Frame Die, cut the card base placing it in the exact center and cutting just the side panels and keeping the center intact to form hinges. Fold the card base along the score line in a zig- zag manner. Using sheet 1B and 12B from HCDP1-2142 Joyous Noel Paper Collection, cover the front and back panels with each piece measuring 1/8" less than the panels, as well as for the oval cut panel.

Using HCPC-3998 - Joyous Noel Background Cling Stamp Set, white heat emboss the background image on vellum card stock, cut using the oval outline die and adhere it to the front oval panel. Using the oval frame from HCD2- 7382 - Simply Classic Oval Frame Die, cut 2 pieces in white card stock and 1 piece in silver card stock. Adhere 1 white die-cut piece to the back oval panel, stack the rest 2 die-cut with the silver one on top and adhere it to the front oval panel.

Cut the angel image from sheet 1B with the small oval die and adhere it to the back oval panel, along with a silver decorative die-cut and add crystal clear glitter on the image. Using HCD1-7263 - Swirly Accent Spray Die, cut 2 pieces each with White and Silver cardstock. Adhere the silver die-cuts on the front panels and the white ones on the back panels as shown. 

Stamp the angel images from HCPC-3996 Joyous Noel Angel Cling Stamp Set on white card stock with Pebble Beach ink, color them using water colors and cut using their coordinating dies. Stamp the Merry Christmas from HCPC-3995 - Starry Holiday Greetings Cling Stamp Set on white card stock with Fern Green ink and cut using the coordinating die along with few extra die-cuts. Stack the die-cuts together with the stamped sentiment on top. Stamp the dove image from HCPC-3997 Starry Noel Angel Cling Stamp Set with Fern Green ink on white card stock, color using water colors and cut using the coordinting die. 

Stamp several flower images from HCPC-3957 - Large Festive Poinsettia Cling Stamp Set on flower making paper with Fern Green ink and color the tips using Night Sky ink. Stamp the leaf images from HCPC-3958 - Small Festive Poinsettia Cling Stamp Set on flower making paper with Fern Green ink and color using the same ink. Shape the petals and leaves using flower making tools, stack and adhere 2 petals each for a flower and add silver stamens for their centers. Add Crystal clear glitter on the flowers, leaves, sentiment and images by sponging some dries clear glue.  

Die cut 2 pieces of silver card stock with the center decorative die HCD2-7382 - Simply Classic Oval Frame Die cut them into 2 halves and adhere them on the corners of the front panel.

Arrange and adhere all the ready elements on the card base using hot glue and dimensional tape. Finish off the card by adding water droplets around the arrangement. 

Other Products: Dimensional adhesive, hot glue, hot glue gun, funnel tray, scissors, paper trimmer, die cutting machine, scoring board, water droplets, water color, brushes

Instructions:

Card size is 7 x 5”. Place the largest Booklet Basics Die just over the top fold of a 7 x 5” white card base and diecut to create shaped card base. Cut the largest Booklet Frames Die from white cardstock and from Luxe Gold cardstock. Sponge white diecut with dries clear adhesive and cover with Rajni Chawla’s dries clear adhesive. When dry, adhere the white diecut over the Luxe Gold diecut just slightly offset to create a gold shadow and adhere this to the card front. Using the second largest Booklet Basics Die, cut from Luxe Gold cardstock. Using the third largest Booklet Basics Die, cut from the Joyous Noel Paper Collection, sheet 5A, ink the edges with Seaside Spray ink, stamp the ‘Noel ‘sentiment from the Starry Noel Angel Cling Stamp Set in the same ink and adhere to the inside of the card. Diecut the largest Booklet Basics die from Luxe Gold cardstock, score in the middle, lightly shape over a glue bottle and adhere to the card front using dimensional dots and dries clear adhesive. Using the second largest Booklet Basics Die, cut sheet 5A again, ink the edges with the Seaside Spray ink, score, shape and adhere to the card front using the dimensional dots and adhesive. Cut a bookmark from Luxe Gold cardstock and adhere to the center using an adhesive strip.

Stamp the Joyous Noel Angel on white cardstock using memento Tuxedo Black ink, color using Stampin’ Blend markers, diecut using the coordinating die, cut off the wings, spritz with Sheer Shimmer Craft Spray – Sparkle and lightly shape using your fingers. Stamp the angel again and the harp on Luxe Gold cardstock using VersaMark ink, cover with WOW Metallic Gold Sparkle Embossing Glitter, heat set using the Heat It tool and diecut using the coordinating dies. Cut the dress off the gold angel diecut and adhere behind the colored diecut slightly offset using dries clear adhesive. Adhere the head and wings of the gold angel diecut directly behind the colored diecut. Cut the harp 3x from white cardstock, adhere together and adhere behind the gold harp. Adhere the angel and harp on the right side of the card front.

Stamp the Small Festive Poinsettia and the Large Festive Poinsettia on Deluxe Flower Shaping paper using Seaside Spray ink, color using the same ink, diecut using the coordinating dies. Stamp the Small Festive Poinsettia holly leaves on Deluxe Flower Shaping paper using Archival English Ivy ink, color using the same ink and diecut using the coordinating die. Shape the flowers and leaves using the Large and Small Festive Poinsettia 3D molds, pierce the centers of the flowers using the Groove Golf Tools, insert gold Assorted Bead Stamens – Medium. Use two flowers for each poinsettia being sure to offset the flowers. Secure the stamens using hot glue. Sponge the flowers and holly leaves with dries clear adhesive and sprinkle with Rajni Chawla’s Crystal Clear glitter.

Stamp the Holly Berry Spray images on Luxe Gold cardstock using VersaMark ink, cover with WOW Metallic Gold Sparkle Embossing Glitter, heat set using the Heat It tool, diecut using the coordinating dies and lightly shape using the Deluxe Flower Shaping Kit stylus.

Adhere the poinsettias, holly leaves and Holly Berry Spray diecuts on the left side of the card front using hot glue. Finish off the card by adding some glitter to the angel.

Other Products: White cardstock, Diecutting Machine, VersaMark, WOW Metallic Gold Sparkle Embossing Glitter, Stampin’ Blend markers – Light and Dark Seaside Spray, SU1000, SU700 and Dark Daffodil Delight, Hot Glue Gun, Misti, Funnel Tray, Seaside Spray Ink Pad

Instructions:

Cut white card stock to 11 x 7 1/2” and score at 5 1/2” to create a 5 1/2 x 7 1/2” card base. From the HCDP1-2142 Joyous Noel Paper Collection Select a dark blue piece of paper and cut to 5 1/2 x 7 1/2” then using the HCDA1-449 Stack and Store Daubers along with Night Sky Ink sponge around the edges and adhere to the card front. Cut a piece of 5 1/4 x 7 1/4” HCGP1-493 Luxe Silver Cardstock and layer on top of the dark blue paper. Next cut a piece of yellow paper to 4 3/4 x 6 3/4” and attach to the silver layer on the card base and set aside. Now cut a light blue patterned paper from the Joyous Noel Paper Collection to 5 x 7” and sponge in the same manner with Night Sky ink. Using the HCD1-7397 French Gate Die use one of the center panels to “cut in” a window into the center of the light blue piece of paper. Do the same using a piece of Luxe Silver Cardstock that measures 4 x 6 1/2”. Off set the Luxe Silver Cardstock slightly behind the light blue panel so that just a hint of silver shows, and glue it to the back of the light blue piece of paper. Cut a piece of Clear Cardstock measuring 4 x 6 1/2” and glue it securely behind the silver piece that was just adhered to seal up the back side of the window opening. From the same French Gate Die from the previous steps use the large rectangle die along with one inner panel to cut a piece of white cardstock, then trim out the inner decorative design to create a white frame for the window (see photo). Then also using white cardstock cut a thinner outer rectangle, for the window, by using the larger and smaller rectangle dies together without the inner die. These two frame pieces glued together create the window frame. Using HCD1-7211 Decorative Pocket Accents Die cut two pocket dies from white cardstock as shown.

Stamp both angel stamps from HCPC-3996 Joyous Noel Angels Cling Stamp Set onto Copic X-Press It paper and color with Copic markers. Cut with coordinating dies. Using white Versa Color Pigment Ink along with Opaque White Embossing Powder stamp and heat emboss the bottom portion of the HCPC-3908 French Doorway Cling Stamp and fussy cut out just the bottom portion to use as a window ledge.

To assemble the shaker card, using 3D foam tape add a double layer of foam tape to the back of the light blue window panel surrounding the entire window opening making sure not to leave any gaps. Also add the same double layer around the outer edges for extra support when it is attached to the card base in the next step. Use an antistatic tool inside the backside of the shaker window before removing any of the foam tape release paper. This will help with static electricity. Now, with the card base laying flat on the work surface with the yellow paper facing up, add the shaker bits to the center of the yellow paper. Next remove the release papers from the 3D foam tape on the back of the blue window piece and add a little Dries Clear Glue to each of the foam pieces, then glue the window straight down onto the card base with the light blue window facing up trapping the shaker bits inside.

To finish the window, glue the two window frames together and dab with Dries Clear Glue using a Hydra Sponge, then sprinkle with Rajni Chawla’s Crystal Clear Glitter. Do the same technique with glittering the Decorative Pocket Accent Dies after trimming off the actual pocket strip along the flat edge. Glue these around the window as shown. Using foam dots, attach the windowsill along the bottom to complete the window.

Each of the angels have been glittered using Dries Clear Glue applied directly to the images with a metal applicator tip, then sprinkled with Ultrafine Transparent Glitter. The angels are then adhered with Dries Clear Glue and foam dots to complete the project.

Other Products: Copic Markers, Copic X-Press It Paper, Star Sequins, 3D Foam Dots, 3D Foam Tape, Paper Trimmer, Scissors, Die Cut Machine

Instructions:

Black chip board 7 1/2 x 4 1/2”, trim the top by cutting the 2 corners. Layer with a piece of the Holiday Star Paper slightly smaller.

Use one of the sentiment tags in the paper collection, mat on a piece of Black card stock, add foam dots to the back and adhere to the tag as shown. Cut the Classic Floral Vase die out, cut in half and adhere under the top and bottom of the sentiment.

Stamp the Holiday Stars on a piece of the Holiday Star paper with White Versa Color and heat emboss with white powder. Cut out with the coordinating die and add small foam dots to the back and adhere around the tag.

Stamp the flowers on white card stock with the Manganese Blue ink, cut out with the coordinating die and place in the matching mold. Stamp the leaves on white with Cottage Ivy ink and color in with the Vivid Chartreuse. Cut out with the coordinating die, place in the matching mold and run through the die cut machine to shape both the leaves and flowers. Arrange on the tag.

To finish add glitter to the leaves and flowers. Place tiny blue gems in the center of each flower. Add a bow to the top.

Other Products: Paper trimmer, die cut machine, heat gun, tiny blue gems, ribbon, black chip board.

Instructions:

Cut a card base from white cardstock that is 6 x12" folded in half. Find and cut out both of the 6 x 6 "printed patterned backgrounds. Cut out just the middle section from one and adhere to the full 6 x 6" piece using foam tape.

Die cut the Rounded Window Frames piece from white cardstock, and cut a plain circle from dark grey cardstock just about the same size as the decorative piece. Adhere these pieces together. Stamp the sentiment onto the white cardstock using grey ink (Archival- Shadow Grey). Adhere the sentiment piece to the card base using foam squares.

Stamp the Baby's Friends images onto white cardstock using black ink (Archival- Jet Black). Add color to the images using Zig Clean Color Markers and a water brush.Deer- Orange, Light Pink, Violet, Leaf Green. Raccoon- Dark Grey, Light Grey, Violet, Leaf Green. Add the animals to either side of the sentiment using foam squares.

Stamp 2 sets of all sizes of the Small Wild Rose using black ink onto Deluxe Flower Shaping Paper. Add color to the larger flowers using blue ink (Distress Oxide Ink- Stormy Sky) and daubers. Shape all of the flowers using the coordinating 3D Shaping Mold. Assemble the flowers and add beads to the middle of each using liquid adhesive. Let dry.

Stamp and die cut 1 of the Leafy Accents image using green ink (Archival- Library Green). Add color to the images using the same ink and daubers. Shape the leaves using the coordinating 3d Shaping Mold. Add flowers and leaves to either side of the card in clusters.

Other Products: Cardstock (White, Grey), Beads, Archival Ink (Library Green, Shadow Grey, Jet Black), Distress Oxide Ink (Stormy Sky), Water brush, Scrapbook Adhesives by 3L (Crafty Foam Tape, Dual Tip Glue Pen, 3D Foam Squares, E-Z Runner Ultra, Thin 3D Foam Squares), Archival Library Green Ink

Instructions:

The finished card measures 4 1/2 x 7 inches. Cut a piece of deluxe flower shaping paper 9  x 7 inches and score at 4 1/2 inches to make a top fold card. Cut different pieces of paper as follows: 4 1/2 x 7 inches in blue paper #5B from Joyous Noel collection, 4 1/4 x 6 3/4 inches in green paper #11B from Joyous Noel collection, glue both on the card base; 4 x 6 1/2 inches in blue paper #5B from Joyous Noel collection 3 3/4 x 6 1/4 inches in green paper #5A from Joyous Noel collection (ink the edge with olive ink). Emboss with white powder and versamark background with the Joyous Noel background, glue on the base with 3D foam dots.

Stamp your flowers (Clematis) onto white flower shaping paper. (I made flowers in French ultramarine ink and in sun dazed ink).  Diecut with the coordinating die. Place face down into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe Flower Shaping kit tools. Glue 3 layers together. In the center of the flowers add white stamens from the rock candy kit. 

Stamp 2 little flowers from the French Cottage collection onto white flower shaping paper with the olive green ink. Diecut with the coordinating die. Give further shape with Deluxe Flower Shaping kit tools. Glue 2 layers together. In the center of the flowers add a blue stamen from the pastel pearl medium kit. 

Stamp in olive green leaves from the Leafy accents. Cut with the coordinating die and shape with the shaping mold.  

Put cheesecloth and sewing thread on your card  and glue your flowers and leaves over. 

Emboss with white powder and versamark ink the bird from the Starry Noel angel stamp. Color with French ultramarine ink and die cut. Glue it through your flowers.

Stamp your sentiment (Noel) in olive on the yellow paper #9B. Die cut with 3 other in white paper. Glue them on each other to make a chipboard and add 3D crystal clear.

For the final touch, add glamour sparkles blue and green.

Other Products: Die cutting machine Cut’n’boss, heat gun, water mister, hot glue gun, hot glue, scissors, cheesecloth, sewing thread, Glamour sparkles blue and green, VersaMark ink, archival sun dazed ink

Instructions:

Card size 5” x 7”. Take pattern paper from the HCDP1-2142 Joyous Noel Paper Collection, tear edges and adhere it on card base using designers dries clear adhesive.

Cut two intricate die from HCD1-7416 Noel Decorative Die on white cardstock and gold cardstock. Paste gold cardstock behind the white cardstock die a little offset to give some dimension. Add crystal clear glitter. Adhere them using foam tape, as pictured.

Stamp angel image from HCPC-3997 Starry Noel Angel Cling Stamp set using archival ink-Goldenrod and Night sky, cut with coordinating die HCD1-7415 Starry Noel Angel Die, add crystal clear glitter, adhere it using foam tape.

Stamp one harp image from HCPC-3996 Joyous Noel Angel Cling Stamp Set on white cardstock using archival ink night sky, cut it with coordinating die HCD1-7414 Joyous Noel Angel Die, color it randomly using archival ink-goldenrod, add crystal clear glitter and adhere.

Stamp some poinsettia flowers from HCPC-3957 Large Festive Poinsettia Cling Stamp Set, using archivalink-goldenrod, HCPC-3958 Small Festive Poinsettia Cling Stamp Set using archival ink-golden rod, cut with coordinating die HCD1-7358 Large Festive Poinsettia Die and HCD1-7359 Small Festive Poinsettia Die, color them using archival ink-golden rod and periwrinkle, shape them using HCFB1-5007 Large 3DFestive Poinsettia Shaping Mold, HCFB1-5008 Small 3D Poinsettia Mold, adhere two petals together, add stamens, and crystal clear glitter.

Stamp some leaves from HCPC-3958 Small Festive Poinsettia Cling Stamp Set using archival ink-Periwrinkle, cut with coordinating die, color them using archival ink-goldenrod shape them using 3d mold . Arrange poinsettia flowers and leaves as shown.

Cut one label die from HCD1-7411 Holiday Star Die on white cardstock and stamp sentiment from HCPC-3993 Holiday Star Cling Stamp Set using archival ink-Night Sky. Adhere it using foam tape.

Other Products: Big Shot Plus Machine.

Instructions:

Create a 5 x 7" card base with white cardstock. Cut a 4.5 x 6.5" piece of dark blue paper from the Joyous Noel Paper Collection, distress using Night Sky and adhere to inside of card. Cut a small portion of the front with the frame die in the Noel Decorative Die. Cut a piece of lighter blue paper from the paper collection, using the Noel Decorative Die to cut the bottom edge, distress with Night Sky and adhere. Cut the Noel Decorative die in white and Luxe Gold and adhere offset, adhere both to bottom of top flap as shown in photo.

Stamp the angel and bird from the Starry Noel Angel Cling Stamp Set and the Joyous Noel Cling Stamp Set in embossing ink on white cardstock, heat emboss with black embossing powder, cut out with coordinating die, color with Zig Markers, add glitter and adhere to the left side of card front with foam tape.

Stamp the leaves from the Holly Berry Spray Cling Stamp Set in Olive, cut out with corresponding dies and sculpt with stylus, add glitter.

Stamp the large poinsettia from the Small Festive Poinsettia Cling Stamp Set in Pistachio, sponge centers with Vivid Chartreuse, cut out with coordinating dies and sculpt with the Small 3D Festive Poinsettia Shaping Mold. Add gold stamens and glitter.

Stamp the small poinsettia from the Large Festive Poinsettia Cling Stamp Set in Pistachio, sponge with same, cut out with coordinating dies and sculpt with the Large 3D Festive Poinsettia Shaping Mold. Add gold stamens and glitter.
Stamp the holly from the Small Festive Poinsettia Cling Stamp Set in Olive, sponge with Vivid Chartreuse, cut out with coordinating dies and sculpt with the Small 3D Festive Poinsettia Shaping Mold. Add glitter.

Adhere poinsettias and foliage as shown in photo.

Other Products: White cardstock, embossing ink, black embossing powder, foam tape, Memento Dye Ink - Pistachio

Instructions:

Cut a 6” square panel from the paper collection and adhere to a 6” square card base.

Die cut the largest scallop circle from the decorative circle frames in white card and the 2nd size using dark blue paper from the collection. Place the 2 circles on the center of the panel and die cut the 3 pieces together using a circle die to create an aperture. Adhere these 3 layers together using dries clear adhesive.

Die cut the top inch of the Noel decorative die using white card x 2 and adhere to the top and bottom of the small panel with the aperture. Trim away the excess from the sides and add to the card base using foam pads.

Add a little dries clear adhesive using a sponge to the white die cuts and sprinkle with transparent glitter.

Cut the sentiment strip and fold the right side back, add adhesive to the strip and hook it around the aperture and along the centre of the panel to the edge, trim off excess.

Stamp the angel into stamping card using espresso truffle ink and colour using copics. Snip off the dove, die cut and shape using the flower shaping tools, add a little transparent glitter to the wings and adhere to the side of the aperture using hot glue.

Other Products: 6" square white card base, copic pens, foam pads, hot glue, stamping card, white card

Instructions:

Its a ready folded card measuring 9" by 6", cut panel on Deluxe Paper measures 8 3/4 by 5 3/4 and adhere it on the card base using dimensional tape. Cut another panel from Joyous Noel Paper Collection measures 8 1/2 by 5 1/2.

For the center, place the smallest die from Fancy Classic Oval Die Set on the deluxe paper and outer oval die from simple classic oval frame die together and die cut the shape, apply clear glue on the center using hydra sponge and cover with magic glitter.

Place the both oval dies from simple classic oval frame die set on Green paper from paper collection sheet number 11B and die cut the oval shape and adhere on the white die cut using clear glue.

Die Cut the first big frame die on the blue paper from paper collection sheet number 2B add extra layer underneath using clear glue for the sturdiness, add on the card center using dimensional tape, add oval frame on the center of the card using foam dots.

Next, stamp the sentiment using versamark embossing ink from Celebrate Love Sentiment Stamp Set on vellum and cover with gold tinsel embossing powder, heat it using heat tool trim and add deluxe card under the vellum sentiment and add on the card front using hot glue.

Stamp the wild flowers on the deluxe card using periwinkle ink diecut the images using coordinating dies, shape the flowers shape the flowers using golf groove tool and finish the flowers using deluxe shaping kit. Use 3 layers of same size to make 1 flower. Make a few flowers using hot glue, add pearls in the centers and mini prills using clear glue, apply clear glue and cover with Nida Tanweer Magic Glitter.

Stamp the images from wild poppy accents stamp set on vellum using versamark and cover with white embossing powder and heat it using heating tool and die cut with coordinating dies.

Stamp leafy accents images with leaf green ink on deluxe paper, color the image with leaf green ink and mowed lawn ink using daubers. Shape the leaves from back with golf groove tool, apply clear glue and cover with Nida Tanweer Magic Glitter.

Die cut the corners from simply classic oval frame die on the deluxe card and green paper aswell. add extra layer of corners under the green paper covers using clear glue and add on the card coners using clear glue.

Arrange all ready elements as shown using hot glue and rhinestones and nuvo drops to embellish the card.

Other Products: Versamark embossing ink, Hot Glue, Dimensional tape, Nida Tanweer Magic glitter, Rhinestones, Nuvo Drops, Vellum, Gold Tinsel Embossing Powder, Pearls.

Instructions:

Take sheet 3B from the Joyous Noel Paper Pad for the background of the 12 x 12" scrapbook page. Cut a 2” x 12” strip from the plain green sheet 11B from the Paper Pad. Mat onto a 2 1/4” x 12“ strip of white card. Adhere down the center of the page. Mat a 3 3/4”x 5 3/4” photo onto a 4” x 6” piece of sheet 11B. Put to one side.

Die cut two Noel Decorative Dies, HCD1-7416, outside edges, in green sheet 11B. Die cut two inside pieces in white card. Adhere the white to the green die cuts and adhere to the sides of the green strip. Adhere the matted photo to the center using foam tape.

Stamp the Starry Angel from the Starry Noel Angel Stamp set, in Ranger Archival Leaf Green ink onto Deluxe Flower Shaping Paper. Die cut with the matching die. Cut off the top of the Angel  as you wont need this part. Color in the bottom starry part with Distress Oxide Peeled Paint and ink the edges using the Daubers and the same ink. Adhere to side of photo.

Stamp in Ranger Archival Jet Black Ink, onto Deluxe Flower Shaping Paper, five Doves, from the Starry Noel Angel Stamp Set. Die cut with the matching die. Color in with Zig Watercolor Markers in Olive Green and Blue. Apply Ranger Glossy Accents to the leaves. Cut off the leaves of two of the doves, put to one side, as you will only need the leaves. Adhere two doves with leaves to the page. Adhere one set of leaves to the top of the matted photo.  

Stamp in Ranger Archival Olive ink, the Joyous Noel Background stamp, twice. Cut one to 5”x 4”, mat onto green paper from the paper pad cut to 5 1/4” x 4 1/4”. Ink the edges in Olive ink using a Dauber. Cut the other Joyous Noel Background stamp to 4 3/4” x 3 3/4”. Ink the edges in Olive ink. Adhere on top of the previous stamped image. Adhere this to the side of the page, using foam tape and Dries Clear Glue. Adhere a Dove with leaves onto the stamped image and adhere one set of leaves slightly behind the background stamp.

Using Dries Clear Glue and a small sponge, dab glue onto the Doves, leaves, stars, and Background stamped image. Sprinkle on clear glitter.

Other Products: White card, clear glitter, foam tape, Ranger Glossy Accents, small sponge, Distress Oxide ink – Peeled Paint.

Instructions:

Cut out the white base of the card and fold it to 8" x 5 ". Cut a slightly smaller rectangle from the paper collection and glue to the base. Cut a 4 3/4 " x 7 3/4" rectangle from the white paper, then cut a slightly smaller rectangle from the paper collection. Cut a 4 1/2 " x 5 3/4" rectangle from the silver paper, then cut rectangle from the paper collection 4 1/4" x 5 1/2" then stamp the Joyous Noel Background Cling Stamp with Memento - Rich Cocoa and Memento - Desert Sand ink and adhere with Double Dots 100 pc. -3D Foam Circles. 

Stamp images from Starry Noel Angel Cling Stamp Set and Joyous Noel Angel Cling Stamp Set stamp with brown ink. Bird in brown and green ink while the Angel: Wings in blue ink, a dress in green ink, hair in brown and a harp in brown ink. Then cut with coordinating die. Shadow with the same inks. Cut out the same elements in silver paper. Adhere the silver cutouts under the colored mages so that they stick out a little from underneath.

Arrange all the elements as shown and glue them with Double Dots 100 pc. -3D Foam Circles.

Other Products: Cutting machine

Instructions:

The ready side-fold card measures, 6" by 8". Cut a smooth white cardstock measuring 12" by 8" and score it at 6" on the longer side. Crease and score it well using a bone folder.

Choose a pattern paper from the designer paper collection and cut measuring 5 1/2" by 7 1/2". Mat it on the white cardstock creating a delicate white border of 1/16" on all sides. Layer the panel on the card base using foam dots. 

Cut the one shadow from white cardstock, and 1 each lacy frame from white and Luxe gold cardstock using Fancy Classic Rectangle Frame Die. Glue the golden frame behind the white one, creating a delicate shadow. Layer the fancy frame on the solid base. Choose the pattern paper from the designer paper collection and cut the fancy frame, stacking the inside window. Use the inside panel to decorate the center and stamp the sentiment using Leaf Green Archival ink. Glue some mixed-size glass droplets for extra interest. Secure the oval die from the Simply Classic Oval Frame Die set and cut a window panel from the other sheet from the designer paper. Distress the edges a little using Leaf Green Archival ink and glue an acetate sheet behind the window. Finally, add some shaker elements and close the window as shown. 

Stamp the required images from Floral Song Cling Stamp Set using black archival ink and paint them using Zig Clean Clear Brush Markers. Next, cut the painted images using their coordinating dies. Glue an extra die cut behind the painted image to add extra strength. Layer the painted images on the card front as shown. 

Stamp, color and cut a few wisteria flowers using Cactus Flower Archival ink and shape them using a flower shaping kit. Add flower prills using a glossy accent and use these flowers to create a floral twig.

Other Products: Smooth White Card stock, Scoreboard, Double-sided tape, Adhesive that dries clear, Clear Droplets.

Instructions:

Card size: 4 5/8” x 6 5/8”. Make a shaped card by placing the outer die of the Decorative Circle Frames over the fold of white 12 X 5 piece folded in half at the top, (it will hang over the edge about 5/8” in this case, see video for further instruction). On the top half of card only, score at the center (from the fold it should be about 2 9/16”, it will be 3 3/8” if measuring from the outside edge of top (you can plainly see the center of the decorative die when it is being scored, don’t worry that it is not even on both halves. Fold the top down toward center fold.

Cut another white front of card with the same outer die then glue it to the front of card on the half that is folded in. When the card is closed all edges should match up. Cut 2 panels with this same outer die from yellow decorative paper, glue one to the front and one to the inside trimming the top as necessary to fit (do not glue over scored fold as this makes it hard to close).

Cut 2 white decorative die cuts and 2 yellow eyelet circles from the Decorative Circle Frames set. Glue one inside trimming at the top and glue one on the front popping up the yellow circle on the front.

Stamp the angel with bird and Magnolia arch with memento Tuxedo Black, die cut, color with Copics, shape slightly from the back and pop up both on the card front.

Stamp Magnolia blossoms (medium and small) 2 times each using Pink Oxide Ink, sponge with pink on the edges then sponge with yellow on the insides, form in the mold then glue 2 together for each flower. Pierce the centers, insert light yellow stamen, secure with hot glue then snip the wires in the back.

Stamp the leaves using Fern Green, sponge with Leaf Green and Magenta Hue, die cut, mold then cut apart.
Stamp the sentiment using pink Oxide, die cut with the small oval from the ovals large set, pop up on the yellow circle inside of card. This will be the stop to keep card open to display.

Glitter flowers and lacquer leaves then glue to front and inside as desired. Add small pearls to the decorative white die cuts.

Other Products: White cardstock, pearls, Distress Oxide in pink and yellow, Copic Markers: YG03, YG11, RV10, RV02, RV00, Y21, YR24, E50, E93, E00, C2, Stickles-Diamond

Instructions:

Cut a piece of white cardstock to 5 x 9", score and fold to get 5 x 4.5" base. Cut out a piece of blue paper from the Joyous Noel Paper Collection to 4 13/16 x 4 5/16", adhere it to the base. Cut out a white and a silver frame with die No. 3 from the Eyelet Frame Gateway Die set, the blue panel with die No. 4 from the same set, adhere them together and to the base.

Stamp the sentiment from the Holiday Star Cling Stamp Set in French Ultramarine ink, cut it out. Stamp the angel and the harp with the Joyous Noel Angel Cling Stamp Set in French Ultramarine and Magenta Hue inks and cut out with coordinating dies. Adhere all elements as pictured.

Stamp blossoms from the Small Festive Poinsettia Cling Stamp Set and the Large Festive Poinsettia Cling Stamp Set in French Ultramarine and Magenta Hue inks onto Deluxe Flower Shaping Paper, color their centers with the same inks, diecut with coordinating dies and shape with molds. Add Pastel Bead Medium Stamens to all flowers. Stamp 6 holly leaf clusters from the Winter Wreath Accents Cling Stamp Set in Fern Green ink, color them with Leaf Green ink and cut out with coordinating die. Stamp 5 small branches from the Holly Berry Spray Cling Stamp Set in French Ultramarine ink onto Deluxe Flower Shaping Paper, diecut with coordinating die. Stamp 2 pomegranate branches from the Winter Wreath Accents Cling Stamp Set in White ink onto Vellum paper, use Opaque Embossing Powder, then heat emboss them and diecut with coordinating dies.

Use dimensional adhesive and hot glue to attach all elements onto card as pictured. To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers, add some self-adhesive pearls and styrofoam balls.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, heat tool, white cardstock, sisal, self-adhesive pearls, styrofoam balls

Instructions:

Click HERE to view the video tutorial for the card.Click HERE to view the video tutorial for the Dragonfly.

Cut a 4 1/4" x 5 1/2" sheet of pattern paper from Decorative Dragonfly Paper collection and adhere it on a same sized card base. Die cut 2 pieces of Deluxe flower shaping paper and a piece of pattern paper using the dies from French Courtyard die set.

Cut the larger die cut a little smaller than half and adhere it and the sentiment die cut and the pattern paper circle on the card as shown. Trim off the excess die cut hanging off the edge.

Stamp the dragonfly image from Decorative Dragonfly cling stamp set on a piece of vellum using VersaColor white pigment ink and heat emboss it using white embossing powder and heat tool. Die cut it using matching die from Decorative Dragonfly die. Ink it from the back using Vibrant Fuchsia and Manganese Blue Archival inks and Stack and Store Daubers. Adhere it on the card as shown. Adhere a few rhinestones to add finishing touch. 

Other Products: Scissors and rhinestones

Instructions:

My finished card size is 3 1/2" x 6 1/2". Make card base and cover with a piece of Sheet 9B of the paper collection. Using The French Gate Die cut a piece of Sheet 12B with the larger rectangle. Use dimensional tape and adhere to card front. Using white cardstock cut out the French Gate Die and also cut one using the Luxe Gold card stock. Glue these two pieces together so the gold shows under the white. Glue to card front.

Stamp the flowers using Leaf Green and color with various colors of Archival inks. You can use your imagination here and color these the way you love them. I used Magenta Hue and Vibrant Fushia, Sunflower and then Ultra Marine Blue and Manganese Blue. The greens are Leaf Green and Olive. Use coordinating dies to cut out the florals.Apply Crystal Lacquer to the blooms of the florals and sprinkle with glitter then set aside to dry.

Stamp the dragonfly onto Flower Shaping Paper and also onto the Vellum using Archival Jet Black ink. Emboss both pieces with gold embossing powder then use coordinating dies to cut out. I colored with Forget Me Not and Cactus flower. Glue the Vellum dragonfly and the paper dragonfly together and lift up on the vellum dragonflies wings. Glue to the top part of the card.

Decide on the placement for the flowers then glue down with hot glue. The card is finished.

Other Products: Die Cut Machine, Gold Embossing Powder, White Cardstock, Hot Glue Gun

Instructions:

Ready basket measures 4" × 2" × 2". Take a piece of white cardstock measuring 8" × 6". Score on 2" on all four sides. Cut corners and create a box. For outer side of box 2 pieces measure 2" × 2" from designer paper and glue it. Using Noel Decorative Die cut two pieces from white cardstock and two from paper collection, glue it together and place on the back and front of box. Cut 2 decorative pieces from gold cardstock and collection paper using Noel Decorative Die and place into front and back box using Foam Strips for dimension.

To create flowers, stamp the Christmas Poinsettia & Holly Cling Stamp Set on white paper with Jet Black Archival ink and die cut using the coordinating dies. Colour the poinsettias with StazOn Black Cherry using a sponge dauber. You will need three petals for each flower, using assorted sizes. After colouring, place the flowers into the mold face down and run through cutting/embossing machine. Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter. Pierce the centre and glue in some stamens using hot glue gun.

To create the leaves, stamp Christmas Poinsettia & Holly Cling Stamp Set with Jet Black Archival ink and color using Ranger Archival Ink Pad - Olive and cut using the coordinating dies. Place the leaves into the mold face down and run through cutting/embossing machine. Sponge the leaves with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Stamp sentiment using Starry Noel Angel Cling Stamp Set on the piece of paper collection with Ranger Archival Ink Pad - Jet Black and sprinkle with Cosmic shimmer Embossing powder - Black Mirage and heat up to melt powder using heating tool. Die cut one using the coordinating die place onto the card using adhesive foam strips.

Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine, Cosmic shimmer Embossing powder - Black Mirage

Instructions:

Score a 4 1/4" x 11" piece of Deluxe Flower Shaping Paper at 51/2" to create a 4 1/4" x 5 1/2" top folding cardbase. Stamp the Joyous Noel Background Cling Stamp Set on the card base using VersaMark ink then heat emboss it using WOW Clear Sparkle Embossing Glitter and heat tool.

Stamp the image from Joyous Noel Angel and Starry Noel Angel Cling Stamp Set on a piece of Deluxe Flower Shaping Paper using Versamark Ink then heat emboss them using Ranger gold embossing powder and heat tool. Color the images with Zig Clean Color Brush Pens and die cut using the matching die from Joyous Noel Angel and Starry Noel Angel Die . Cover the Angel's wings and the design on the dress with dries clear adhesive, sprinkle rafTangles Shimmer Dust, let it dry and then burnish the glitter with your fingertip. Brush off the extra glitter.

Adhere both the images on the card as shown using adhesive foam strips.

Other Products: Versamark ink, WOW Clear Sparkle Embossing Glitter, WOW heat gun, Brustro Green Gold Brush and CrafTangles Shimmer Dust.

Instructions:

The ready card base measures 6″ by 8″. Choose the designer paper from Joyous Noel Paper Collection and cut it to the size 5 3/4”x 7 3/4” and adhere it on the card base. Cut 4 corners from Luxe Gold cardstock using Simply Classic Oval Frame Die and glue them behind each corner shown a little out as an extra accent

Choose the paper from the same designer paper collection and cut it to the size 5 1/4”x 7 1/4”. Stamp a beautiful background stamp from Joyous Noel Background Cling Stamp on this designer paper using archival fern green ink. Mat this paper on Luxe gold cardstock, making a delicate border on all the sides. Adhere this panel on the card base using foam tape.

Cut 3 pieces of fancy oval frames 2 from white cardstock and 1 from Luxe gold card stock using Simply Classic Oval Frame Die and glue them together keeping the white die cuts on the top and gold one a little offset. Cut the solid frame oval from the same paper collection and glue it on the back. Cut the outer frame in Luxe Gold card stock using the same die. Layer all these die cuts on the card as shown.

Stamp the angel and noel images from Starry Noel Angel Cling Stamp set on a smooth white card stock using VersaMark and heat emboss using golden embossing powder and cool jade embossing powder by Nuvo.

For flowers and leaves stamp the images from Christmas Poinsettia & Holly cling stamp set on Deluxe flower shaping paper using spiced marmalade distress oxide ink and Leaf green archival ink. Color the flowers using Morocco memento ink, Tangelo memento ink and Spiced Marmalade distress oxide ink. Color leaves using leaf green and a little hint of spiced marmalade distress oxide ink. Cut flowers and leaves using coordinating dies and shape them using coordinating mold. Now add golden stamens to the centre of flowers.

Now add all the ready elements to the card as pictured. Also cut a sentiment from designer paper and add to the center using foam tape. Add golden powder to the flowers using designer dries clear adhesive.

Other Products: Dimensional Adhesive, hot glue, scoreboard, die-cutting machine, copic markers, VersaMark watermark stamp pad, smooth white card stock, golden embossing powder, cool jade embossing powder, spiced marmalade distress ink, Hot glue.