Instructions:

The ready top fold card from smooth white cardstock measures, 5″ by 8 1/2″. To prepare the top panel, choose the light green paper from the designer paper collection and cut it to size measuring 41/2″ by 8″. Distress all the sides using sharp scissors and mat it directly on the white cardstock measuring 1/8″ larger. Next, layer it with one layer of foam tape on coordinating paper from the same paper collection. Finally, layer the prepared panel with one layer of foam tape on the ready card base.

Using Elegant Hearts Centerpiece Die cut 3 pieces of the center element from white cardstock and 2 pieces using Luxe Gold Cardstock. Glue the gold one behind the white ones, creating a soft gold shadow. To the remaining white element, cut the coordinating solid octagon and glue them together as shown. To this add a bit of inlay work with the scrap pieces of gold. Arrange the three elements on the card front, creating dimensions using foam tape.

Stamp the florals with Majestic Violet on flower-making paper using Clematis Cling Stamp Set. Cut the florals using the coordinating die set and color the flowers using Magenta Hue and highlight them using Majestic Violet Archival inks. Spritz water and shape the flowers using golf groove tools. Prepare 3 large flowers of 2 petals each and 5-6 filler flowers using the one smallest petal each. Prepare 2 large flowers and add small rock candy stamens. Also, prepare medium and small flowers. To these add flower center pearls.

Cascading Wisterias are first stamped with Cactus Flower Archival ink, cut with its coordinating die, and then colored using the same ink. Once all colored these are shaped using Deluxe Flower Shaping Kit and add glitter balls to the centers.

Using Celebrate Love Sentiments Cling Stamp Set, stamp the sentiment with white pigment ink on vellum cardstock and sprinkle white heat embossing powder. Dust extras and heat set it using a heat gun. Following the same procedure, stamp the butterfly on vellum using versa mark ink and gold heat emboss the butterfly using Floral Butterfly Accent stamp. Cut the butterfly using its coordinating die.

For foliage, Stamp the images from Leafy Accent stamp set with Olive green archival ink and paint them using Leaf green Archival ink. Cut the foliage using its coordinating die. Shape the leaves using a groove golf tool.

Once all the elements are ready, add heat embossed sentiment layered on gold cardstock, add glitters, and complete the card by assembling a small floral bouquet as shown.

Other Products: Smooth white cardstock, Score Board, Die Cutting machine, Tacky glue, Glossy Accent, Foam Tape, Adhesive that dries clear, Versafine ink.

Instructions:

Prepare a 6 x 6" Twisted Easel card. Cut a piece of white card stock 6 x 12, score on the 6" and turn, score corner to corner on the top 6" to make the easel card twist.

Cut a piece of the window Scene paper 5 3/4" x 5 3/4", cut one corner to corner and adhere all 3 pieces in place.

Cut one of the Rounded Window frames out, (cut the center out too), adhere to the card as shown.

Stamp several of the leaves from the Large Floral Urn cling Stamp and die setusing Emerald Green ink, color in with the Zig markers, cut out with the coordinating die.

Stamp the Small Wild Rose flowers on white card stock with the Manganese Blue ink, color the center in with the Vivid Chartreuse, then lightly color the edges with more of the Maganese Blue. Cut out with the coordinating die and place in the matching mold to shape. Add stamens to the center to complete the flower.

Stamp the Wild Asters on white card stock with the Cantaloup ink and lightly color with the same ink, cut out with the coordinating die, use the Flower Shaping tool to shape.

Adhere all the leaves and flowers on the card both outside and inside as shown.

Cut one of the Ornate Ovals out for the sentiment, stamp the sentiment from the Special Birthday Sentiment set with Library Green ink, place foam dots on the back and adhere to the inside of the card,

To finish, add larger pearls to the center of the Asters, tiny pearls to the corners of the card and glitter to the leaves and flowers.

Other Products: Paper Trimmer, Die cut machine, Tiny Pearls, Large Pearls,

Instructions:

Create a 6 by 7" gatefold card base and mat with pattern papers from the seasonal wreath paper collection. 

Cut the out centerpiece frame from the simply elegant centerpiece die set using pattern papers. Cut the decorative centerpiece from the same die set with pattern papers and luxe gold cardstock. 

Cut the centerpiece frame and decorative centerpiece in half and adhere on both sides of the card front using foam tape and foam strips.

Stamp the snowflakes from the winter wreath accents stamp set on vellum and heat emboss in white, cut the snowflakes using the coordinating die.

Stamp the small festive poinsettias on vellum and heat emboss in white, color the petals with versamagic thatched straw. Add go man go prills to the flower centers.

Stamp the leaves from the small festive poinsettias and holly berry stamp set using archival fern green. Cut and shape the leaves using their coordinating dies and 3d shaping molds. 

Arrange everything as shown and add the snowflakes as accents.

Lastly, add a sentiment from the paper collection and dust the flowers with glitter.

Other Products: Versamagic thatched straw, white embossing powder, foam tape.

Instructions:

Other Products: Smooth White Cardstock , Hot glue , Dimensional tape, Copic Markers, Black Distress Ink, Sea Grass Archival

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 10” x 7”, score at 5” along the long side and fold to create a base card of 5” x 7”. Cut a piece of silver cardstock 5” x 7” and adhere to the front of the card. Cut a piece of light green paper 4 7/8” x 6 7/8” and adhere to the front of the card. Cut a piece of silver cardstock 4 5/8” x 6 5/8” and adhere to the front of the card. Cut a piece of light green paper 4 1/2" x 6 1/2" and adhere to the front of the silver card.

Die cut three frames using the No. 2 die from the HCD2-7307 Royal Elegance Frame Die set – two from Deluxe Flower Shaping Paper and one from silver cardstock. Adhere the two white frames together and then adhere the silver frame to the top and then adhere to the front of the card.

Stamp the flower, leaves, birds and eggs, butterfly and bee images from the HCPC-3965 Summer Wreath Accents Cling Stamp Set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and colour pencils and die cut with the coordinating dies. Add the flower and leaf images to the centre of the frame to create a bouquet. Add the birds on the left side of the bouquet and the eggs in the nest on the bottom right of the bouquet as shown. Add the butterfly to the flowers and the bees with small foam squares on the outside of the frame as shown.

Add Crystal Clear glitter using clear gloss gel medium and iridescent gems to some of the flower centres and outside the frame.

Die cut the outer bow image from the HCD1-7375 Seasonal Wreath Die out of silver cardstock. Die cut the outer bow image from the HCD1-7375 Seasonal Wreath Die out of light pattern paper and adhere to the silver bow image. Die cut the decorative bow image from the HCD1-7375 Seasonal Wreath Die out of silver cardstock and adhere to the front of the bow and then adhere the bow to the bottom of the bouquet. To finish add an iridescent gem to the centre of the bow.

Other Products: Iris cardstock, Prismacolour pencils, iridescent gems, clear gloss gel medium, small foam squares.

Instructions:

Cut a piece of white cardstock to 11 x 7 1/4", score at 5.5" and fold to get a base. Cut a piece of patterned paper from the Spring Garden Paper Collection to 5 1/4 x 7", another one to 5 x 5" and a little bigger piece of white cardstock. Cut out a diecut with outline die from the Simply Elegant Centerpiece Die set and a patterned paper from the Spring Garden Paper Collection, then use smaller die to cut out a white doily. Die-cut a white Delicate Flourish from the Cut Mat Create 2A die set. Stamp the sentiment in Tuxedo Black ink and Just For You Sentiments stamp and cut it out.

Stamp flowers from Cottage Garden Hydrangea Cling Stamp Set in Summer Sky ink onto Deluxe Flower Shaping Paper, color them with Summer Sky and Pink Peony inks, diecut with coordinating dies, shape with mold and add to their centers some Lettuce Entertain You! prills. Stamp two Large Hydrangea Blossoms in Tuxedo Black ink, color them with Summer Sky and Pink Peony inks and diecut with coordinating die. Stamp one branch from Leafy Accents Cling Stamp Set in Leaf Green ink, color them, cut out with coordinating die and shape with coordinating mold. Stamp 2 bees from the Summer Wreath Accents Cling Stamp Set in in Tuxedo Black ink, color them with markers and diecut with coordinating die. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers and bees.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, promarkers, white cardstock, gauze

Instructions:

The finished card measure 5 x 6 1/4 inches. Cut one piece deluxe flower shaping paper 10 by 6 1/4 inches and score at 5 inches to make a side fold card. Cut a 4 3/4 x 6 violet paper and a 4 1/2  x 5 3/4 green paper and glue it on your card base. Cut a piece of white cardstock  4 1/8 x 5 1/2.  Ink the edge in deep purple ink and glue it on the card base with 3D foam. 

Use the smaller part of the Simple Centerpiece die and cut it 9 times in pattern paper and one time in violet.  Ink the edge of the pattern paper with leaf green ink and in deep purple for the violet. Glue on the base and cut to fit with the white paper. On the violet one stamp a sentiment from the Just For You Sentiments. Glue the violet one with 3D foam.

Make 2 Climbing Clematis Flowers of different sizes. Stamp with Deep purple ink onto Deluxe flower shaping paper, color the center with the same color ink and shade the edge with the same color sea grass ink. (You can also color the back of the flowers).  Diecut with the coordinating die. Place face down into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe flower shaping kit tools. Glue 2 layers together. Poke a hole in the center of the flower and add stamens. Put a little bit of glue on the tips of you petal and dip them in the crystal clear powder to make them shine. Also make 1 leaf in leaf green with the same technique.

Put cheesecloth and sewing thread on the left side of your sentiment. Glue your flowers and leaves on it. 

Other Products: Die cutting machine, water mister, hot glue gun, scissors, cheezecloth, sewing thread, archival ink sea grass,

Instructions:

Tent fold card size is 5 x 7”. Cut Deluxe Flower Shaping Paper to 10 x 5”, score and fold at 3” on the long side. Cut another piece of deluxe Flower Shaping paper 4 x 6”. Cut paper from the Floral Butterfly Collection as follows and ink all the edges using Archival Majestic Violet ink: paper with the butterflies 3 7/8 x 5 7/8” - adhere on the 4 x 6” cardstock using dries clear adhesive, purple sheet 8B 4 7/8 x 6 7/8” – adhere on inside of card, plaid sheet 11B 4 7/8 x 2 7/8” – adhere on front of card base. Adhere the 4 x 6” panel to the top of the card front using dimensional squares. Sponge dries clear adhesive on the butterflies and flowers on the card front and sprinkle with Crystal Ultrafine Transparent Glitter.

Using the largest eyelet die from the Eyelet Rectangle and Basics Die set, cut from Deluxe Flower Shaping paper. Stamp the sentiment from For My Friend Sentiments Cling Stamp set using Majestic Violet ink and adhere the rectangle to the inside of the card.

Stamp the small butterflies from the Large Floral Butterfly Cling Stamp Set on Flowerite Vellum using VersaColor Pigment Ink Pad – White, sprinkle with WOW Sparkling Snow Embossing Glitter, heat set using the Heat It Tool and color the backs using Majestic Violet ink. Diecut using the coordinating die and cut apart using a scissor. Sponge with dries clear adhesive, sprinkle with glitter and adhere to the card front using hot glue.

Other Products: Diecutting Machine, WOW Sparkling Snow Embossing Glitter, Hot Glue Gun

Instructions:

My finished card size is 3 3/4" x 7 1/2". Using white cardstock, make card base and cover with a piece of the paper collection. Cut out the decorative Adorn It Pocket Accents die from white cardstock and glue to the card front. Cut a piece of coordinating paper 1 1/2" x 7 1/4" and glue down the left side of the card front covering a portion of the decorative die.

Stamp flowers onto Deluxe Flower Shaping paper using New Sprout ink and cut out with the coordinating dies. Use Stack and Store Daubers to add Magenta Hue ink to the edges of the flowers. Lay onto the coordinating mold, spritz with water and run through the die cut machine. Turn out onto the desk to dry. As they are drying use the Deluxe Flower Shaping kit to add a bit more dimension to the flower petals. Use hot glue to glue two petals together to make the rose. Put a clump of hot glue in the center of the flowers and add the Prills there. Allow to dry.

Stamp the leaves using Fern Green Archival ink and color using Leaf Green. Cut out with coordinating dies and edge with some of the Magenta Hue and Olive ink. Lay onto mold, spritz with water and run through the die cut machine. Turn out onto the desk to dry.

When everything is dry, add adhesive to the end of a wedge of a Hydra Sponge and dab along the edges of the flowers and leaves. Sprinkle glitter and allow to dry. Decide on placement of flowers and leaves and use hot glue to adhere to card front.

Other Products: White Cardstock, Hot Glue Gun, Die Cut Machine

Instructions:

Cut a 6 x 6” panel from Countryside Cottage Paper Collection 1A and remove the rounded square using Cut, Mat Create 2A, edge with Pink Peony. Adhere Cheerful Note Sentiments Cling Stamp Set ‘Sending you a Hug’ onto a stamping block in a curved line and ink with Jet Black stamp onto the aperture panel around the curved edged. Adhere over the front of a 6 x 6” card base already covered with Countryside Cottage 1B using foam strips.

Line the inside of the card with the remaining 1B and edge in Pink Peony. Die cut and mat and layer Ornate Ovals and Eyelet Oval & Basics Large Die with Countryside Cottage 8B and white cardstock. Masking off part of the stamp, ink up ‘friend’ with Forget Me Not and stamp onto the white oval.

Stamp onto white cardstock in Versafine Onyx Cottage Summer 'Scapes, Large Floral Butterfly and Sweet Magnolia Buds and clear heat emboss. Die-cut and colour with Zig Clean Colour Real Brush Markers and water pen. Use scissors to separate the butterfly strip.

Stamp onto Deluxe Flower Shaping Paper in Vibrant Fuchsia and Rose Madder Sweet Magnolia, die-cut and colour the edges and backs in the same colour, centres in Vivid Chartreuse. Stamp onto Deluxe Flower Shaping Paper in Fern Green the leaves and petals for the buds, die-cut, colour the backs and edges with Leaf Green and Vivid Chartreuse. Place in 3D Magnolia Shaping Mold, spritz with water and run through the die-cutting machine, complete shaping with the Deluxe Flower Shaping Kit. Hot glue 2 off-set petals together, pierce the centre and thread through pearl stamens, push floristry wire up into the stamens of the completed magnolia flowers and buds and secure with hot glue, wrap the wire with tape adding the leaves as you go, use a little hot glue.

Stamp in Tea Rose onto Deluxe Flower Shaping Paper Garden Zinnia, die-cut and colour front and back with Tea Rose, place in Large 3D Zinnia Shaping Mold, spritz and run through die-cutting machine. Offset and adhere 2 petals together with hot glue, pierce the centres and add stamens, secure at the back with hot glue and cut off the excess cord.

Adhere the magnolia branch with hot glue around the aperture and tuck in Sweet Magnolia Buds and Garden Zinnia.

Adhere the flower pots and butterflies some with hot glue and some on dots for dimension.

Apply Dries Clear with a sponge and sprinkle on Crystal Clear glitter.

Other Products: Paper trimmer, scissors, hot glue, florist wire and tape, versafine onyx and clear heat embossing powder

Instructions:

Cover a C6 card blank (4 1/8 x 6 5 3/4”) with Tender Moments Paper Collection, sheet 10B, edged with Sky Blue. Cut Tender Moments Paper 12B and tear the edge for the bicycle to ride upon, edge with Leaf Green. Die-cut Rounded Scallop Window and Circle Basics Large in Delightful Daffodil Paper Collection sheet 8B and edge with Sunflower ink, adhere to the card trimming off excess, add dots behind the sun.

Line the inside of the card with Tender Moments Paper 12B and mat and layer Diamonds and Lace with Tender Moments sheet 10B and white cardstock. Stamp out the sentiment in Sky Blue ‘Hey it’s your birthday’ from Special Birthday Sentiments edge with Sky Blue and Leaf Green.

Stamp in Jet Black onto white cardstock Barnyard Accents, Cottage Lifestyle, Large Floral Butterfly and Cottage Summer ‘Scapes, colour with Zig Clean Color Real Brush Markers and die-cut using coordinating dies. Add Dries Clear adhesive and Minnie Pearls Prills to the centre of the sunflower. Adhere die-cuts to the front of the card using glue and dots, trim off overhanging bicycle.

Stamp onto white cardstock in Sky Blue ‘Lets Celebrate’ from Celebrate Love Sentiments, die-cut with Arrows and Banner mat onto Tender Moments sheet 10B edged in Sky Blue, adhere with dots.

Add gems and wink of stella for a little sparkle.

Other Products: Paper trimmer, wink of stella clear, gems

Instructions:

This Layout measures 12“ x 12“ Using the design paper sheet 9B in the collection paper pad and adhere this to the 12“ x 12“ grey board for the layout base. Find the design paper sheet 2B and trim this to 6“ x 7“. Ink the edges with the Viridian ink then adhere this to the layout base as seen in the project photo, a little to the lower right using the double sided foam tape

Die cut the torn lace frames by using the large lace frame from the Elegant Swirl Gateway die set and the paper sheet 2B, die cut two. Using the lower part of the frame by tearing it to size then inking with the Viridian ink and layering so it will frame the two photo corner edges.. The photo size used for the lay out is, 2  3 /4 “ x 3 3 / 4“. The photo is backed with grey board and the edges are sanded with the sand paper.

Using the white card stock and the Library Green ink, stamp all needed embellishments for this project from the Summer Wreath Accents, Autumn Wreath Accents and Winter Wreath Accents Cling Stamp sets. Using the archival inks and the aqua pencils to color the stamped images. Archival inks used:- Bow: Viridian and Olive. Wheat: Sunflower. Granite Apples: Red Geranium and Leaf Green. Aqua pencils used:- Owls: Bison, Persimmon pencils. The flowers:  Sunflower, Cherry, Mango pencils.  Leaves: Pesto green and Cherry pencils. The hearts: Cherry pencil.

When all is done, die cut the images using the matching die sets. Bring a little shaping to the elements by using the flower shaping tool kit. Adhere the elements to the layout, clustering in the corner s as shown. Use the hot glue gun and the clear drying adhesive to do this.

Make the sentiment by using the larger sized letters from the Letters and Numbers die set. Die cut four layers for each letter from the white card stock and one layer each from  the 2B paper sheet. Adhere all the layers together before adhering to the layout. Add the sand to the flower centres by applying the clear drying adhesive then sprinkling sand on the flowers. Add the leaves, flowers and the hearts to the photo sides as shown.

To finish the project, add the crystal lacquer to the letters.

Other Products: Inks used: Spectrum Noir aqua pencils: :- bison, persimmon, sunflower, cherry, mango, pesto green and cherry. Other: Paper trimmer, Hot glue gun, Double sided tape, Double sided 3D foam tape, Black sand, 12 “ x 12 “ grey board, Sand paper.

Instructions:

Card measures 6” x 6”. To create a card base - cut out 12” x 6” piece of HCPP1-438-1 Paper Pack of 10 - Black, then score it at 6” (long side up). Fold using a bone folder along the score lines.

Cut out a slightly smaller square of HCDP1-2131 Rustic Sunflower Paper Collection and distress the edges with Memento Dye Ink Pad - Paris Dusk using HCDA1-449 Daubers, then adhere it to the card front as shown. Die cut three decorative frames of HCPP1-438-1 Paper Pack of 10 - Black with HCD1-7370 Simply Elegant Centerpiece Die, then stack and adhere them to the card front using 3D foam.

Stamp the flowers and leaves on HCPP1-468 Deluxe Flower Shaping Paper Pack of 25 - White using HCPC-3962 Rustic Sunflower Cling Stamp Set with Memento Dye Ink Pad - Rich Cocoa, then colour the leaves with Memento Dye Ink Pads - Bamboo Leaves, Potter’s Clay and colour the flowers with Memento Dye Ink Pads - Dandylion, Potter’s Clay using HCDA1-449 Daubers and die cut them with matching HCD1-7364 Rustic Sunflower Die.

Place flower petals and leaves in HCFB1-5009 3D Rustic Sunflower Shaping Mold , spray them with water and run them through a die cutting machine. Assemble Sunflowers using a hot glue gun, HCST1-401 Deluxe Flower Shaping Kit and black glitter. Using a sponge add Designer Dries Clear Adhesive to the leaves and flowers, sprinkle them with Glitter and, then adhere flowers and leaves to the card as shown.

Other Products: Die Cutting machine, Trimmer or Guillotine, Scissors, Hot glue Gun, Bone folder, glitter, black glitter, memento Dye Ink Pad - Dandelion

Instructions:

Make a gatefold card base using white card stock. Cut white card stock measuring 7“ x 12”. On the 12” side score at 3” and 9”. Fold in the flaps to make gatefold card. Cut pattern paper from the paper collection a little smaller than the card flaps and card base. Distress with distress ink. Adhere using clear glue.

Cut two strips of white card stock 1” x 7”. Cut two pieces of dark green background pattern paper 3/4” x 7”  and adhere on the white strip. Adhere these pieces on the two front flaps.

Cut a piece of white card stock 4” by 4” and cut pattern paper from paper collection and adhere this on the white pieces. Adhere this on the left gate in the center of the card.

Cut two die cuts, one in white card stock and one in luxe gold card stock using the inner decorative window die from the Teardrop Lattice Gateway card. Adhere the gold die cut under the white die cut, offsetting a little. Cut two pieces of circle frame die cut from white card stock, using the eyelet basics and circle die set. Adhere the two pieces together and adhere this frame on the square card piece. Adhere the decorative window on the card front.

Cut three pieces of seasonal wreath die cut from deluxe flower shaping paper and color them  different shades of green and brown using Archival ink.

Layer these on top of each other using foam dots. Adhere the wreath on the decorative window.

Stamp the elements from the Summer Wreath and the Autumn wreath stamp set using Jet black ink on deluxe flower shaping paper. Stamp the owl and baby image . Color all these with Zig real brush pens and cut with matching dies.

Stamp the leaves from the two sets in green and brown Archival ink on Deluxe flower shaping paper and color them in shades of green and brown. Shape the leaves using the deluxe flower shaping tool kit.

Arrange the leaves, fruits, berries etc. on the wreath using clear glue. Add the owl image using foam tape.

Cut sentiment from the paper collection and add to finish the card.

Other Products: die cutting machine, white card stock, Rustic Impression Distress ink, scoring board

Instructions:

From the Home on the Farm Paper Collection checkered sheet 11A, cut a larger tag from the HCD1-7201 Ticket and Tags Die set . From the remnants of the random watercolor background with orange blotches, made of shades of orange, cut out the smaller tag. Connect them together with glue.

Stamp the images you want onto white cardstock. Use black ink for selected images from HCPC-3966 Autumn Wreath Accents Cling Stamp Set, HCPC-3941, Countryside Autumn 'scapes Cling Stamp Set (use brown ink for background sunflower from this set), and an oblong leaf in the background from the HCPC-3939 Cottage Tree 'scapes Cling Stamp Set.

Use green ink - Bamboo Leaves to stamp vine leaves from HCPC-3966 Autumn Wreath Accents Cling Stamp Set on green sheet 10B of the Delightful Daffodil Paper Collection.

Cut with matching dies. Paint with watercolor paints in selected colors as shown. Use shades of yellow, orange, brown, green and purple.

Lay the red thread asymmetrically on the watercolor background and layer the selected motifs as shown. Adhere the individual elements with glue. And it's ready! Give an autumn tag in warm, energetic colors to a loved one.

Other Products: Cutting machine, watercolor paints, brush, thread, Distress Ink-Rusty Hinge

Instructions:

Cut a white cardstock base that is 6 x 6". Cut a piece of the orange and teal patterned paper that is 5.75 x 5.75", and a piece of the teal patterned paper that is 4.75 x 4.75". Adhere these layers to the card base. Die cut out the Rounded Window large die cut layer from white cardstock. Cut a large plain circle from yellow patterned paper. Adhere these 2 layers together and to the card base. Die cut the smaller decorative circle from white cardstock. Stamp the sentiment on this smaller piece using brown ink (Staz On- Timber Brown). Adhere this to the card using foam squares. Add brown pearls to the corners of the card front.

Stamp and die cut 2 sets of each the larger and smaller Rustic Sunflowers using brown ink. Add color to the flowers using 2 tones of yellow ink (Stampin Up- Delightful Dijon, Crushed Curry) and daubers. Shape the flowers using the coordinating 3D Shaping Molds. Assemble the flowers and add brown Prills to the middle of each using a liquid adhesive. Let dry.

Add the flowers to the top and bottom as well as the side of the 6 x 6" card using adhesive dots.

Other Products: Stampin Up Ink (Crushed Curry, Delightful Dijon), Gems, Cardstock- White, Scrapbook Adhesives by 3L (3D Foam Squares, Adhesive Dots Medium, Dual Tip Glue Pen)

Instructions:

Card size: 6 x 6”. Start with 6 x 12” white heavy weight cardstock, score at 6” and fold. Cut a red panel 5 3/4" square from the Home for the Holidays Paper Collection, glue it to the card front. Cut the 6” card panel from decorative paper with the old red truck on it, cut off the outer green border then glue it to the red panel. Cut similar panels for the inside of the card. Diecut the corner Frame a Card Leafy Border Die from white cardstock, adhere to the bottom left of the inside to create a pocket. Diecut a tag from white cardstock, add a panel from the paper collection, add ribbon and insert in the pocket. 

Using a pencil, draw a heart shape to include most of the truck scene (use a template or die cut shape to make heart shape if necessary). This line will help guide where you put the wreath pieces. Cut 2 Adorn-It Pocket Accents from white or shimmer white. Use just the outer part of the die cuts to make a heart boarder for the wreath, glue it, snipping curves where necessary to help it lay down flat.

Stamp laurel type leaves 4 times from the summer Seasonal Wreath set out of light green cardstock, die cut. Stamp the pine cones, at least 5, ornaments and berries several times from white, stamp holly from medium green several times, stamp pine boughs from dark green several times each, die cut all pieces. Die cut 2 holly wreaths of the Seasonal Wreaths die set from medium green, cut apart.

Start arranging the wreath without gluing to see how it looks best to you then start gluing pieces and popping up some pieces. Try to keep the general large heart shape.

Lacquer the ornaments, glitter the rest. Die cut a white snowflake (set aside).
Make a multi-loop bow for the top of the wreath, glue it to the top then “hang” ornaments below it using pop dots. Glue the white snowflake to the top of bow.

To finish, just add pearls to the snowflake center and to each corner of the card. Put some Stickles on the Christmas lights on the back of the truck.

Other Products: White cardstock, green cardstock, red silk ribbon, pearls, Stickles, Copic Markers: R43, R24, R29, E33, E35, G94, YG03, Y11, Y15, YR23, B00, B01, B02, G99

Instructions:

Die cut a few pieces of white cardstock and a piece of Luxe Gold cardstock using the dies from Elegant Heart Centerpiece Die and Courtyard Elegance Die. Adhere them to a 4 3/4" x 4 3/4" white cardstock as shown and trim off the excess die cuts. Adhere this piece on a 5" x 5" white card base using double sided foam tape.

Stamp the flowers from Large Festive Poinsettia Cling Stamp Set and Small Festive Poinsettia Cling Stamp Set with Carnation Red Archival Ink on a sheet of Deluxe Flower Shaping Paper. Ink them with the same ink using oval makeup brush. Die cut them using the matching dies from Large Festive Poinsettia Die and Small Festive Poinsettia Die.

Stamp the leaves from Large Festive Poinsettia Cling Stamp Set with Leaf Green Archival Ink on a sheet of Deluxe Flower Shaping Paper. Ink them with the same ink using oval makeup brush. Die cut them using the matching dies from Large Festive Poinsettia Die.

Shape them all using Large 3D Festive Poinsettia Shaping Mold, Small 3D Festive Poinsettia Shaping Mold and Deluxe Flower Shaping Kit. Apply Designer Dries Clear Adhesive on them using Hydra Sponges and sprinkle Craftangle Shimmer Dust glitter. Add a little Lettuce Entertain You Prills to the poinsettia centers. Arrange and adhere the poinsettia and leaves as shown on the card front. Glue few pearls on the die cut background to add finishing touch.

Other Products: CraftTangles shimmer dust, double sided foam tape, oval makeup brush and pearls.

Instructions:

Create a 5 x 7" card base in white cardstock. Cut a 4.5 x 6.5" piece of dark green designer paper from the Seasonal Wreath Paper Collection, distress with Library Green and adhere.

Cut the doily die from the Rounded Window Frame Die in white cardstock, cut off the bottom piece (to be attached to the bottom of the card later) and adhere to the top of the card.

Cut a 4.25 x 6" piece of pale green designer paper, distress with Library Green and adhere with foam tape. Cut the green frame from the paper collection and adhere with the remaining piece of Rounded Window Frame Die doily underneath, as shown.

Cut out the detail wreath with the Seasonal Wreath Die in dark green paper from the paper collection and the wreath frame in medium green designer paper and Luxe Gold cardstock and adhere them with foam tape off set. Adhere to the center of the card.

Cut out the small branches and holly from the Seasonal Wreath Die in Gold Luxe cardstock.

Stamp the berries and holly from the Winter Wreath Accents Cling Stamp Set in Jet Black on Bristol Smooth paper, color with Zig markers and cut out with coordinating dies. Sculpt with Deluxe Flower Shaping Kit.

Stamp the sentiment from the Festive Winterscapes Cling Stamp Set in Jet Black and cut out with the Arrows and Banner Die.

Cut out the bow from the Seasonal Wreath Die in red cardstock, cut out the detail bow in the same paper and distress with Light House, adhere together. Cut out the outer die from the bow in Luxe Gold cardstock. Adhere the red bow to the gold frame with foam tape.

Adhere the wreath as pictured, as well as the Luxe Gold branches, holly and berries, with bow at bottom of wreath.

Stamp the Large Festive Poinsettia Cling Stamp Set in Light House, cut out with coordinating dies and sponge with same, sculpt with the Large 3D Festive Poinsettia Shaping Mold add stamens and glitter.

Arrange and adhere sentiment, poinsettias and foliage along bottom.

Other Products: White cardstock, Bristol Smooth Cardstock

Instructions:

To create gift box, use the Treasured Heart Gift Box Die set. First, die cut hexagon base and 6 sides from red card stock. Mat box sides with 2” x 2” pieces from Festive Poinsettia Paper Collection. Also mat top petals with die from the set using collection paper. Fold on creasing lines created by the die and glue sides to the base and then to each other to assemble gift box.

Stamp multiple Poinsettia flowers and leaves using Large and Small Festive Poinsettia Cling Stamps with red and green archival ink pads onto white cardstock. Color flowers and leaves using daubers and archival inks. Die cut with coordinating Festive Poinsettia dies and then shape with matching shaping mold. Embellish center of flowers with stamens and petals with Stickles glitter glue.

Stamp leaves and swirls using Holly Berry Spray Cling Stamps with green archival ink pad onto white cardstock. Color using daubers and same ink. Die cut with coordinating die.

Layer Poinsettia flowers on top of holly berry spray and leaves using hot glue. Adhere Poinsettia flowers and leaves to top of box.

Other Products: Die Cutting machine, red card stock, hot glue gun, hot glue, paper trimmer, Ranger Stickles glitter glue in Lime Green, Orange Slice and Gold.