Instructions:

Cut Deluxe Flower Shaping paper to 11 1/4 x 4 3/8" size, score and fold at 5 1/8" to create card base. From the Floral Basket paper collection, cut a 5 11/16 x 4 7/16" paper panel from center of sheet 3B. Cut a piece of regular white cardstock to 4 1/4 x 5 1/2" size panel. Using from the HCD1-7157 Eyelet Oval & Basics Large Die, use the largest plain oval to die cut opening from the center of white panel. Using from the HCPC-31010 Basket Blooms Cling Stamp Set, stamp the rose/peony bouquet in Viridian ink onto all 4 corners of the paper panel. Clean the stamp and repeat, this time in Versacolor white ink and then sprinkle white embossing powder and heat set. Sponge the white panel edges and inside corners with Pink Peony and Magenta Hue ink. Sponge the inside edges of oval with Vivid Chartreuse ink. Sponge the teal panel along the outer edges with Garden Patina ink. Attach the teal panel onto card base. Attach the white panel onto teal panel using dimensional adhesive for the top section of panel and glue for the bottom, attach at an angle onto teal panel. Stamp the ‘With all my Love’ sentiment onto inside of oval as shown. 

Stamp the floral bouquet from HCPC-31010 Basket Blooms Cling Stamp Set in Garden Patina ink onto Deluxe Flower Shaping paper and die cut with coordinating die. Clean the stamp and repeat, this time in Versacolor white ink and then sprinkle white embossing powder, heat set and die cut. Stamp the small peony from the same set in Garden Patina for the leaves, Rose Madder and Magenta Hue for the flower onto the Deluxe Flower Shaping paper and diecut. Stamp the large bouquet from HCPC-31009 Basket Florals Cling Stamp Set in Versacolor white onto vellum, sprinkle with white embossing powder, heat set and die cut with coordinating die. Stamp the basket and handle from HCPC-31008 Wicker Basket Cling Stamp Set in a combination of Pebble Beach and Goldenrod ink onto the Deluxe Flower Shaping paper and diecut with coordinating die. Stamp the bow from the same set in a combination of Rose Madder and Magenta Hue ink. 

Sponge the peonies and filler florals in bouquet with Pink Peony ink. For the two stemmed peonies use Pink Peony and Magenta Hue ink. Use the same for the other round florals in the bouquet. Brighten up the peonies in bouquet even more with the Light Pink marker and blender. Use Vivid Chartreuse and Garden Patina ink on the largest leaves. Use the Pale Green marker and blender on the rest of the leaves. Sponge the basket and handle with Sepia and Goldenrod ink. Sponge the bow with Pink Peony ink.  

Assemble the bouquet, basket and bow together as shown. Attach the vellum florals on bottom right next to oval as shown. Attach the bouquet as shown. 

Use the Dries Clear glue along with a yellow dauber to add a sparkle of Baby’s Breath glitter over flowers in bouquet and on the four corners of card panel. Add a light sparkle of Mint Julep glitter around sentiment within oval. Add pearls onto bouquet.

Other Products: Art Institute Baby’s Breath & Mint Julep Ultrafine Glitter, Hot Glue, Hot Glue Gun, Dimensional Adhesive, Funnel Tray, Scissors, Paper Trimmer, Diecutting Machine

Instructions:

Make a card base using white card stock measuring 7 "by 5 ". Fold to make a top folding card.

Cut a piece of background paper from the paper collection , a little smaller than the card front and add to the card base. Cut another mat layer from the paper collection and cut it to size 4 1/2" by 5".

Cut two pieces of die cut from the Delicate Daisy Corner and Border die in white and gold stock. Attach the white die cut on the gold die cut and adhere on the card front. Cut a piece of round vellum paper from the basic circle die and add a gold frame cut from the same die set using Luxe Gold paper.

Then stamp the image of the basket in jet black ink on white cardstock and colour with archival ink. Stamp images of the flowers stems with black ink and colour with zig marker.

Stamp the small flowers from the classic Rose stamp set on Deluxe flower shipping paper and colour with vibrant Fuschia ink. Make leaves using olive green and leaf green ink shape the flowers and leaves in the 3D flower shaping mold.

Stamp the images from the basket blooms stamp set and colour with markers, cut with matching die. Stamp the bow and colour and cut with matching die.

Arrange the vellum paper round on the card front. Add the basket with flowers and finish with the sentiment and a satin ribbon bow.

Other Products: Die cutting machine, scoring board, satin ribbon

Instructions:

Create a top fold white card measuring 6 1/2”x 6 1/2”. Choose a designer paper from Floral Basket Paper Collection and cut it to the size 6 1/4” x 6 1/4”. Adhere it on white card base. Choose another designer paper from the same Paper Collection and cut it to the size 5 7/8” x 5 7/8”. Layer this paper on smooth white card stock of measurement 6” x 6”. Adhere this panel on ready card base using foam tape.

Next, Cut 2 white die cuts from Delicate Daisy Corner & Border Die and 2 solid covers using the same die from Luxe Gold Cardstock. Mat white die-cut on the gold base and finally layer it on the ready card front as shown. Cut 2 white die cuts from white card stock using the small die from Slim Lattice Oval Die. Stack both together for extra strength. Now stamp the sentiment from Special Birthday Sentiments Cling Stamp Set using VersaMark on solid die cut designer paper from same collection and sprinkle golden embossing powder. Heat set the sentiment. Adhere these die cuts on the card as shown.

Choose and stamp the images from the Wicker Basket Cling Stamp set on smooth white card stock using VersaMark and heat emboss with golden embossing powder. Now again stamp the image from Basket Blooms Cling Stamp Set on smooth white cardstock using jet black archival ink. Paint all the images using Zig Clean Clear Brush Markers. Cut all the images using their coordinating dies. Using the dies from Basket Blooms die set and cut from luxe gold card stock and stack it behind the coloured images slightly offset. Die cut a tag from Floral Basket paper collection using a die from Ornamental Tags die set.

Once all the elements are ready, decorate the card using prepared coloured images.

Other Products: Die Cutting Machine, Score Board, Bone Folder, Smooth White Cardstock, Scissors, Golden Heat Embossing Powder, Heat gun, VersaMark watermark stamp pad,

Instructions:

Cut a piece of white cardstock to 5 1/4” x 8 1/4” and score at 1” along the 8 1/4” side to form a 1” flap. Using the largest die from the HCD2-7384 Fancy Classic Rectangle Frame die set cut this piece with the die slightly over the top fold line so that the score line is preserved. Now using the same die, cut 2x from white cardstock. Attach one to the flap to form a card base. Make sure the flap is to the inside of the card base so that it can be covered when finishing the inside of the card. Trim the top of the card to match along the top so it opens easily. Now to complete the card front, simply attach the third cut piece to the front of the card which will make the top of the card look complete and will strengthen the card overall. Using that same die from the Fancy Classic Rectangle die set, cut a piece from HCDP1-2146 Floral Basket Paper Collection, sheet 7B. Using the HCDA1-449 Stack and Store Daubers, Ink the edges using Paradise Teal Archival Ink and glue to the card front. Next using the second largest die from the same set cut 2 pieces, one from sheet 10B, and another from Luxe Gold Cardstock. Layer the green on top of the gold and offset a little to create a two tone look. Attach to the card front. Using the same die, cut a pink piece from HCDP1-2133 Floral Banners Collection Paper Pad, Sheet 12B. Insert the center section into the green and gold frame. Using the HCD1-7157 Eyelet Oval and Basics Large die set, cut one scallop oval from Luxe Gold Cardstock. Using HCD1-7156 Eyelet Oval and Basics Small die set, cut a piece from sheet 2B of the Floral Basket Paper Collection. Layer these two ovals and attach to the card front using 3D foam dots. 

Stamp the basket and handle from the HCPC-31008 Wicker Basket Cling Stamp Set with Versa Color White ink onto white cardstock and heat emboss with white embossing powder. Die cut with coordinating dies. Stamp the flowers from the HCPC-31010 Basket Blooms Cling Stamp Set onto Copic X-Press It Paper with Memento Tuxedo Black Ink and color with Copic markers. Die cut with coordinating dies. Add dots of Dries Clear Glue to the small yellow filler flowers and sprinkle with Clementine Ultra Fine Transparent Glitter.

Glue the white basket to the center oval on the card front. Glue the underneath of the handle down to the background paper. Using 3D foam dots add the flowers to the top of the basket then glue down the front part of the handle on top of the flowers. Add a coordinating bow to the handle. Finish the inside of the card as desired.with designer paper, Luxe Gold. cardstock and eyelet oval diecuts.

Other Products: 3D Foam Dots, Copic X Press It Paper, Copic Markers, Scissors, Trimmer, Die Cut Machine

Instructions:

The ready top-fold slimline card from smooth cardstock measures 9 1/2" by 4 1/2". To prepare the card base, cut the paper measuring 9 1/2" by 9" and score at 4 1/2" on 9" length and crease well. For the first panel, choose the paper from the designer paper collection and cut a panel using HCD3-7431 Slim Eyelet Rectangle Die, and layer it on the card front using foam dots. 

Next cut one each of white and gold die-cut using HCD3-7433 Slim Lattice Oval Die. Glue gold one on the bottom a little off center to create the shadow. Layer this die cut on the card front using foam dots. 

Stamp the images from Wicker Basket Cling Stamp Set and Basket Florals Cling Stamp Set with black archival ink and paint them using Zig Clean Clear Markers. Cut the images using their coordinating dies and shape them a little and add dimensions. Layer the ready-painted bouquet on the ready card front and complete the card using the stamped ornamental tag. The sentiment is from Celebrate Love stamp set. 

Other Products: Smooth white cardstock, double-sided tapes, Glossy Accent, Score Board, Die Cutting Machine

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 10” x 7”, score at 5” along the long side and fold to create a base card of 5” x 7”. Cut a piece of floral pattern paper 4 7/8” x 6 7/8” and adhere to the front of the card. Die cut two frames using the No. 1 and No. 3 dies from the HCD2-7382 Simply Classic Oval Frame Die - one from Deluxe Flower Shaping Paper and one from light green paper.  Adhere the paper over the white frame. Die cut the outer decorative die using the Nos. 2 and 3 dies from gold cardstock and adhere to the frame as shown. Adhere the frame to the card front with foam tape. Adhere the oval previously cut from the frame from green pattern paper and adhere inside the frame. Die cut a decorative oval using the Nos. 3 and 4 dies from the HCD2-7382 Simply Classic Oval Frame Die. Add Frosting Powder to the outer decorative edge using Dries Clear glue on a sponge. Adhere to the inside of the frame over the light green pattern paper oval. Die cut an oval out of floral pattern paper using the No. 5 die from the HCD2-7382 Simply Classic Oval Frame Die and adhere to the inside of the decorative oval.  Die cut the inner decorative die using the No. 6 die from the HCD2-7382 Simply Classic Oval Frame Die out of Deluxe Flower Shaping Paper. Add Frosting Powder using Dries Clear glue on a sponge and then adhere to the centre of the frame over the floral pattern paper oval.

Stamp the basket and handle image from the HCPC-31008 Wicker Basket Cling Stamp Set and a small floral spray from the HCPC-31009 Basket Florals Cling Stamp Set in Tuxedo Black ink on alcohol marker friendly paper. Colour the images using alcohol markers and die cut with the coordinating dies. Adhere the basket to the front of the card using foam tape. Adhere the large floral spray over the basket with foam tape as shown and then adhere the handle over the flowers .

Stamp the ribbon bow from the HCPC-31008 Wicker Basket Cling Stamp Set in Tuxedo Black ink on alcohol friendly paper. Colour with alcohol markers and die cut with the coordinating die. Adhere the bow to the basket.

Stamp the sentiment from the HCPC-3847 Celebrate Love Sentiments Cling Stamp set in Tuxedo Black ink on light blue pattern paper. Die cut using the HCD1-7203 Ornamental Tags Die set and adhere under the flowers and bow.

Other Products: Altenew alcohol markers - Artist Markers Set B, Sunshine Valley Garden Set, Alcohol Markers Set B. Copic Markers YG17 YG23, Neenah 80Ib Classic Crest Cardstock, foam tape

Instructions:

Cut a white cardstock 6 x 6" card base. Then find and cut out the 6 x 6" patterned panel used. Adhere to the card front. Find and cut out both (2) of the small oval card front patterned pieces. Mat one in white cardstock and add to the 6 x 6" card front. Trim the other down slightly, then die cut out the oval middle using the oval die. Cut a piece of acetate to fit in behind this piece, adhere them together. Using 3D Foam Strips, add 2 layers around the oval opening to create the shaker section. Add the sequins to the shaker and then carefully adhere to the card base using the bottom as a guide. 

Using grey ink (CTMH- Whisper) stamp the sentiment onto white cardstock. Die cut the sentiment out using a small oval die. Dust the edges with the dark pink ink (CTMH- Pomegranate). Adhere to the shaker portion of the card using Thin 3D Foam Squares. Add gems to the sentiment piece. 

Stamp the basket image and handle onto white cardstock using an embossing pad and Distress Embossing Enamel- Hickory Smoke. Stamp the bow image onto white cardstock twice using dark pink ink. Using a waterbrush and the same ink, add color to the bow. Adhere the 2 bow pieces together and shape slightly. Assemble the basket and add the bow. Adhere to the left hand side of the shaker card. 

Other Products: Embossing Pad, Distress Embossing Glaze- Hickory Smoke, Close To My Heart Ink (Whisper, Pomegranate), Waterbrush, Gems, Acetate, Spiegelmom Scraps Sequins Mix, Cardstock- White, Scrapbook Adhesives by 3L (3D Foam Strips, Thin 3D Foam Squares, 3D Foam Squares, E-Z Runner Ultra)

Instructions:

Make a slim line card by cutting your paper 9” x 8 3/4”. Score on the 9” side 4 1/2” making the card 4 1/2” x 8 3/4”. Top it with a piece of the Floral Basket paper 4A on top 1/4” smaller.

Cut 2 of the Slim Lattice Ovals, one out of Gold, the other out of white. Adhere to 2 together off setting them slightly so the gold will show underneath. Adhere in the center of the card.

Stamp the 2 of the Basket Florals on white with Black Color Box ink heat emboss with black powder. Color with the Zig markers. Die cut with the coordinating dies. Add dimensional tape on the back.

Stamp the basket on white with Distress ink Walnut Stain, color with Tea Dye. Cut out with the coordinating die. Add foam dots to the back and ahere to the card, add floral arrangement on top along with the extra flower from the set.

Stamp the Sweet Magnolia flowers on white with the Vibrant Fuchsia ink. Lightly color the center with the same ink. Cut out with the coordinating die. Highlight the edges with more of the ink, place in the matching mold. Run through the die cut machine to shape.

Stamp the leaves with Cottage Ivy, color in with the same going very light, cut out with the coordinating die and place in the matching mold, run through the die cut machine to shape. Adhere the flowers and leaves on the left side of the basket.

Stamp the sentiment on white with the Teal Zeal ink, cut out with the Ticket and Tags die. Add adhesive and tuck behind the flowers.

To finish, add glitter to all the flowers and leaves.

Other Products: Paper Trimmer, Die Cut Machine, Square foam dots, Distress ink Walnut Stain and Tea Dye,

Instructions:

Card size 9” x 4” (final size). Take pattern paper from HCDP1-2146 Floral Basket Paper Collection, size 8.875” x 3.875”.  Cut another die from HCD3-7431 Slim Eyelet Rectangle Die ( 2nd largest die) on white cardstock. Take another layer of die and cut it on pattern paper from die HCD3-7432 Slim Basic Rectangle Die (2rd largest die) on pattern paper and adhere it on white cardstock using designer dries clear adhesive. Now adhere this layer using foam tape. Cut one die from HCD3-7433 Slim Lattice Oval Die on white cardstock and adhere it using foam tape. Next cut one eyelet circle die from HCD1-7154 Eyelet Circle & Basics Small Die on white cardstock, adhere it using foam tape, sprinkle some drop of splatter of water adding archival ink-forget me not re-inker drops in water.

Stamp one basket, handle and ribbon image from HCPC-31008 Wicker Basket Cling Stamp on white cardstock using Stazon ink-jet black, cut it with coordinating die HCD1-7436 Wicker Basket Die. Color them using archival ink-garden patina and night sky, add 3d crystal lacquer and add crystal clear glitter.

Stamp one bloom image from HCPC-31010 Basket Blooms Cling Stamp Set on white cardstock, cut it with coordinating die HCD1-7438 Basket Blooms Die. Color using Zig markers andarrange them as pictured.

Cut one tag die from HCD1-7202 Albums Tags and Accents Die, on white cardstock. Stamp sentiment from HCPC-3843 Special Birthday Sentiments Cling Stamp using archival ink-garden patina and night sky. Adhere using foam tape.

Other Products: Big Shot Plus Machine.

Instructions:

Create a 5 x 7" card base in white cardstock. Cut out a 2 x 6.75" piece of teal striped paper from the Floral Basket Paper Collection and adhere to bottom of card. Cut out the Filigree Accents Die in white cardstock and adhere on striped paper, as shown in photo. Cut out a 3 x 6.75" piece of teal paper from the paper collection and adhere with foam tape. Cut out the corners from the Filigree Border & Accents Die x2 and adhere to each top corner.

Cut out the scalloped oval from the Eyelet Oval and Basics Large Die in white cardstock and adhere, cut out the oval from the Eyelet Oval and Basics Large Die in light blue and distress with Summer Sky, adhere with foam tape, as shown.

Stamp the sentiment from the Just for You Sentiments Cling Stamp Set in Jet Black on light blue designer paper and cut out the with the Arrows and Banner Die.

Stamp the basket, bow and handle from the Wicker Basket Cling Stamp Set, and the floral from the Basket Blooms Cling Stamp Set in Jet Black. Sponge the basket and handle with Pebble Beach, cut out with coordinating dies and adhere with foam tape on the oval. Sponge the florals with Sunflower, Summer Sky, Leaf Green, Vibrant Violet, add accents with Zig Markers, cut out with coordinating dies, add glitter and adhere with foam tape. Sponge bow with Vibrant Violet, cut out with coordinating die, add glitter and adhere with foam tape as shown. Adhere the sentiment.

Stamp the small zinnias from the Large Garden Zinnia Cling Stamp Set in French Ultramarine, sponge with Sunflower and French Ultramarine, cut out with coordinating dies and sculpt with the Large 3D Zinnia Rose Shaping Mold, add prills and glitter.

Stamp the small zinnias from the Large Garden Zinnia Cling Stamp Set in Leaf Green, cut out with coordinating dies and sculpt with the Large 3D Zinnia Rose Shaping Mold, sculpt into buds and add glitter.

Stamp the medium zinnia from the Small Garden Zinnia Cling Stamp Set in French Ultramarine, sponge with Sunflower and French Ultramarine, cut out with coordinating dies and sculpt with the Small 3D Zinnia Rose Shaping Mold, add prills and glitter.

Stamp the leaves from the Leafy Accents Cling Stamp Set in Olive, cut out with coordinating dies, sponge with Leaf Green, sculpt with 3D Leafy Accents Shaping Mold.

Adhere flowers and foliage as pictured.

Other Products: White cardstock

Instructions:

My card size is 5" x 7". Make card base and cover with a piece of Sheet 1B of the paper collection. Set aside while we work on all the elements.

Stamp the basket and floral using Rich Cocoa and color the basket with Rich Cocoa ink and a Stack and Store Dauber. Color the florals with Prisma Color pencils, odorless mineral spirits and blending stumps. Stamp the bow with Goldenrod ink and color with a dauber and Goldenrod ink. Cut everything out with coordinating dies and glue everything together to make the floral basket.

Stamp the sentiment with Goldenrod ink and cut out with Ornamental Tags Die and set aside.

Using white cardstock and the Luxe Gold Cardstock cut out one each of the Regal Lattice Gateway Die. Glue these two pieces together with the gold piece under the white and offset a bit so it shows through. Use the archway die from the set to cut out a piece of white cardstock and place it in the Embossing Folder and run through the die cut machine. Glue this piece on top of the two die cuts creating a sort of medallion.

Now glue the basket to the top of this medallion piece and using dimensional tape glue down the sentiment. Now add dimensional tape to the medallion piece and adhere to card front. The card is finished.

Other Products: Die Cut Machine, White Card Stock, Prisma Color Pencils: PC-913 Spring Green, PC-938 Blanc, PC912 Apple Green, PC922 Poppy Red, PC908 Dark Green, PC930 Magenta, PC1004 Yellow Chartreuse, Blending Stumps, Odorless Mineral Spirits, Dimensional Tape, Die Cut Machine, Fanciful Flowers Embossing Folder

Instructions:

Cut out the white base of the card and fold it to 5,75" x 8". Cut a slightly smaller rectangle from the paper collection and glue to the base. Cut a 5" x 7.25" rectangle from the white paper, then cut a slightly smaller rectangle from the paper collection. Adhere with Double Dots 100 pc. -3D Foam Circles.

Cut the white paper frames from the Oval Filigree Frame Die set, then from the paper collection cut out the oval frames from the same set. Glue as shown in the photo.

Stamp the sentiment from the Just For You Sentiments set in black ink on a strip of paper from the collection. Cut a slightly larger strip of white paper and tape it underneath.

Stamp flowers from the Basket Florals set in black ink on white paper. Colorize with watercolor markers. Then cut with the matching die. Stamp basket and bow from the Wicker Basket set in black ink on white paper. Colorize with watercolor markers. Then cut with the matching die. Cover the bow with glue and glitter.

Glue all elements as shown.

Other Products: Cutting machine, watercolor markers

Instructions:

Cut sheet 7B from the Floral Basket Paper Collection to 5" x 7". Adhere to a 5" x 7" card blank. Die cut an Oval Filigree Frame, largest piece, from the Oval Filigree Frames Die Set, in Luxe Silver Cardstock, adhere to card front.

Stamp onto Deluxe Flower Shaping Paper in Ranger Archival Olive ink, the largest Wicker Basket from the Wicker Basket Cling Stamp Set. Color with Olive ink using a Dauber. Die cut with the matching die. Adhere to card front with Designer Dries Clear Adhesive. Stamp in Ranger Archival Coffee ink, the Basket Florals from the Basket Florals Cling Stamp Set, color lightly with Olive ink. Die cut with the matching die, adhere to Wicker Basket.

Stamp and color in Distress Oxide Tumbled Glass ink, the smaller Poinsettias from the Large Festive Poinsettia Cling Stamp Set. Stamp five sets. Die cut with the matching dies, place in the Poinsettia Shaping Mold, lightly mist with water and run through a die cutting machine. Tap out and lightly color the edges with Tumbled Glass ink. Glue three layers together with Dries Clear Adhesive, offset the petals as you go. Add Dries Clear Adhesive to each flower center and add Stop Whining Prills. Adhere to centre of the Basket Florals die cut piece with hot glue.

Stamp in Olive ink, three lots of Holly Berry Spraysfrom the Holly Berry Spray Cling Stamp Set.  Die cut with the matching dies. Lightly shape with the stylus from the Deluxe Flower Shaping Kit. Adhere around the Poinsettias with hot glue. Fill two small Berry die cut pieces from the Small Poinsettias with Dries Clear Adhesive, add Stop Whining Prills. When dry, adhere around the Poinsettias.

Sponge Dries Clear Adhesive over the flowers and sprays, apply clear glitter. All done.

Other Products: 5" x7" card blank, foam tape, Distress Oxide - Tumbled Glass, water mist bottle, die cutting machine, hot glue, white card, small gem, clear glitter.

Instructions:

Ready side fold card measures 5.75" × 7.75". Cut a mat from designer paper collection measuring 5.5" × 7.5". Adhere it on card base. Cut another mat from designer paper measuring 5" × 7", distress edges with matching ink and adhere it on white cardstock which is 1/8 of an inch bigger on all four sides. Adhere it to card using dimensional tape. Cut decorative pieces from white and gold cardstock using a die from the set.  Glue both pieces together, but a little bit offset. Stamp sentiment on it using mulberry ink. Glue it on card using foam dots.  

Stamp image on water colour paper using black archival using stamp from Budding Rose Stamp set. Paint image using zig markers and cut with coordinating die. Adhere it to card using foam dots as pictured.  

Stamp classic rose flowers on deluxe flower shaping paper using magenta hue ink and cut with coordinating die. Paint flowers with magenta Hue and Mulberry ink. Shape with round object and create 3d flowers. Stamp classic rose leaves using fern green ink and the Floral Shoppe Fillers using leaf green ink, diecut with coordinating dies. Paint with same ink and shape using shaping mold. Stamp lush lilac flower using sea grass ink and cut with coordinating die. Shape using shaping mold, pierce the centre and add stamen.

Arrange the ready elements on card and glue them using hot glue.

Other Products: Smooth White Cardstock, Sea Grass Archival, Watercolour Paper

Instructions:

A ready side fold card measures 5" x 7". Cut a mat from the designer paper collection that measures 4.75" x 6.75" and adhere it to the ready card base. Cut another mat from designer paper collection measuring 4.25" × 6.25", adhere it on white cardstock which is 1/8 of an inch bigger on all four sides. Using dimensional tape, mat it on the card. As shown, stamp the sentiment with black archival ink. Use the die from the Curvy Accent Border Die Set to cut two decorative borders from white and gold cardstock. Glue them together. As  pictured, cut this border and glue it to the card. Die cut decorative heart from white and gold cardstock using a die from the Decorative Heart Die Set. Glue both together and adhere to card using foam strips. 

Stamp classic rose flowers on deluxe flower shaping paper using magenta hue ink and cut with coordinating die. Paint flowers with magenta Hue and Mulberry ink. Shape with round object and create 3d flowers. Stamp classic rose leaves using fern green ink and Holly Berry leaves using leaf green ink, cut with coordinating dies.  Paint with same ink and shape using shaping mold. Stamp Wisteria flower using sea grass ink and cut with coordinating die. Shape using shaping mold, pierce the centre and add stamen. Arrange the ready elements on card and glue them using hot glue. 

Other Products: Smooth White Cardstock, Sea Grass Archival

Instructions:

The finished card measure 5 x 7". Take a 10 x 7" white base and fold it in half to make a top fold card. Place die from Decorative circle frame die about 1/2" up past fold so that fold does not get cut. Cut with the die again on another piece of white, ink the edge with magenta hue ink and then glue it to the folded card matching bottom and side edges. 

Cut 5 times the decorative part of the outside die out of pattern paper #4B from floral Basket collection. Glue it on each other and glue to the card front. Cut a 3.25 circle in white cardstock and ink the edge with magenta hue ink. Glue it with #D foam.

Cut 5 times the sentiment from the Lattice flourish gateway with white cardstock and one time with green paper #10B.  Add crystal lacquer and glue on the card. 

On white cardstock stamp basket in sepia ink and flowers with jet black ink. Color with zig markers. Add 3D crystal and crystal clear on the flowers. Glue on the card with 3D foam dots.

Other Products: Die cutting machine Cut’n’boss, heat gun, water mister, hot glue gun, hot glue, scissors,

Instructions:

Card size:  5” x 7 7/8”. Make a shaped card using the outer die of the Flourish Companion Frame on a folded 5 1/4” x 7 1/4" card, letting edge of die hang over the fold at the top by about 1/4" (see video). Die cut a blue decorative paper panel using the same outer die. Glue panel to the folded card. Die cut the large decorative frame of the same set from white cardstock then glue it to the blue panel. 

Die cut 2 Delicate Daisy Borders from white and from silver, glue each set together slightly off-set. Pop these up onto card both bottoms facing each other in the center (ends will hang over card).

Stamp the Basket blooms and extra lily (2 lilies) using black ink. Stamp the shorter basket using black ink, die cut all then color with Copic markers. Pop the basket and then pop the flowers on top in the center of card. Tuck the 2 sets of lilies under the basket on both sides.

Stamp the sentiment using VersaMark then emboss with silver powder and a heat gun. Die cut with the Ticket and Tags set. Cut a silver mat for the sentiment. Pop sentiment up under the basket.

Randomly glitter card, glitter the flowers, use white Nuvo on the baby’s breath, glue silver half pearls on each corner.

Other Products: White cardstock, Silver embossing powder, Versamark ink, silver half pearls, Copic: E51, E53, E33, E35, E39, RV10, RV00, RV02, YG03, YG23, YG17, YG61, G82, Y11, Y15, Y35, Y38, V01, V12, BV00, BV01, B00

Instructions:

Cut a piece of white cardstock to 5.5 x 11", score at 5.5" and fold to get a base. Cut a piece of paper from the Floral Basket Paper Collection to 5 1/4 x 5 1/4", another one to 5 x 5". Cut out a white frame with a die No. 5 from the Eyelet Frame Gateway Die. Cut out a white and a silver frame with dies No. 3 and 4 from the Teardrop Lattice Gateway Die. Stamp the sentiment in Fern Green ink from Just For You Sentiments stamp and cut it out. Adhere all elements to the base as pictured. 

Stamp 4 lilies and 2 flower clusters from the Basket Blooms Cling Stamp Set in Tuxedo black ink. Color them with colored pencils and cut out with coordinating dies. Stamp 12 blossoms from Sweet Magnolia Blooms Cling Stamp Set in Magenta Hue ink onto Deluxe Flower Shaping Paper, color them with the same ink, diecut with coordinating die and shape with mold. Add some Pastel Pearl Stamens Small to flowers. Stamp blossoms from Lush Lilac Stamp Set in Sunflower and Buttercup inks onto Deluxe Flower Shaping paper and diecut with coordinating die. Shape them with Deluxe Flower Shaping tools and add some Go Man Go Prills. Stamp 3 branches from Leafy Accents Cling Stamp Set in Fern Green ink, color them with Leaf Green ink, cut out with coordinating die and shape with coordinating mold. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers and some pearls.   

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, sisal, colored pencils, self-adhesive pearls

Instructions:

Its a ready folded card measuring 9" by 6". Cut panel on Luxe Gold Paper measuring 8 3/4 by 5 3/4" and adhere it on the card base using dimensional tape. Cut another panel on Deluxe Flower Shaping paper measuring 8 1/2 by 5 1/2" and adhere on the golden panel using clear glue. Next, trim panel from Floral Basket Paper Collection sheet number 1B measure 8 1/4 by 5 1/4" and adhere this panel on the card using clear glue.

Die cut the shape of border on the gold luxe card from Curvy Accent Border Die Set and add on the card front top and bottom as shown using clear glue. Die cut the shape of frame on deluxe card and gold luxe card from Oval Filigree Frame Die Set adhere together using clear glue and add this frame on the card center using foam dots.

Stamp the image of basket, bow and handle on the deluxe card using versamark embossing ink and cover the image with white powder and heat it using heating tool, die cut the shapes using coordinating dies. 

Stamp the image of basket blooms and branches of rose on the deluxe card using versamark embossing ink and cover the image with Golden Tinsel powder and heat it using heating tool, die cut the shapes using coordinating dies. Color all images using Zig clear brush markers. Apply clear glue randomly and sprinkle some magic glitter.

Stamp the sentiment on the deluxe paper using Paradise Teal ink from Friendship Sentiments Cling Stamp Set and trim, color the edges with Kitsch Flamingo ink using dauber.

Arrange all ready elements as shown using foam dots and hot glue gun.

Embellish the card using decorative beads.

Other Products: Dimensional Tape, Twine, Golden Tinsel Embossing Powder, Decorative Beads, Versamark Embossing Ink, Hot Glue Gun, Kitsch Flamingo Distress Ink.

Instructions:

The ready side-fold card base is 8 1/2 x 6 inches in size on Kraft cardstock. Cut a piece of sheet 7A from HCDP1- 2142 Joyous Noel Paper Collection measuring 1/8 inch less than the card base and adhere it to the inside panel. Use sheet 10B to cut a piece measuring 8 x 5 1/2 inches, sponge the edges using Golden Rod ink and adhere it to the front panel along with an Ivory base larger in size just enough to give a thin frame around. 

Using HCD2-7383 Simply Classic Rectangle Frame Die cut the outline with sheet 5B and Ivory cardstock. Stack and adhere them together, sponge the edges with Golden Rod ink and adhere it to the card front slightly tilted. Cut the large decorative frame with 1 Gold and 2 Ivory cardstocks, stack and adhere them together on the outline. Use the smallest decorative die from HCD2-7399 Flourish Companion Frame Die to cut from Kraft cardstock to adhere on all the corners of the inside panel. 

For the shaker element, stamp the image from HCPC-3993 Holiday Star Cling Stamp Set onto White cardstock with Peeled Paint oxide ink and heat emboss with Fern Green embossing powder. Cut the image using the coordinating die and sponge using Golden Rod ink. Cut the image again with a smaller star die to create a frame along with few more die-cuts with Ivory cardstock. Use sheet 1A for the inside panel of the skaker and add glitter and micro beads for the same. Adhere the ready shaker element to the card base as shown. 

Stamp a few images of the flowers and leaf spray from HCPC-3958 Small Festive Poinsettia Cling Stamp Set, HCPC- 3957 Large Festive Poinsettia Cling Stamp Set and HCPC-3959 Holly Berry Spray Cling Stamp Set onto flower making paper with Fern Green ink. Color the images using Fern Green and Golden Rod ink and cut using the coordinating dies. Stamp 3 of the smallest flowers from HCPC-3906 Small Wild Rose Cling Stamp Set with Manganese Blue ink of flower making paper, color using the same ink and cut with corrdinating dies. Shape the images with the flower shaping tools and add crystal clear glitter by sponging dries clear glue. 

Stack 3 petals for the large flower, 2 petals each for the smaller flowers and add the flower centers for each of the flowers. Arrange and adhere the ready element onto the card base as shown using hot glue. Finish off the card by adding some rhinestones and Gold beaded thread around the arrangement as accents.

Other Products: Kraft cardstock, Ivory cardstock, Dimensional adhesive, funnel tray, scissors, paper trimmer, scoring board, die cutting machine, Peeled Paint distress oxide ink, Ranger Fern Green embossing powder, Gold microbeads, White microbeads, rhinestones, green glitter, Gold beaded thread

Instructions:

Die cut 2 pieces of white cardstock using the largest Rectangle Filigree Frmes Die. Score one of the solid pieces at 1/2" and fold it. Now adhere this folded tab behind another piece to create the shaped card base. Ink it lightly with Worn Lipstick Distress ink. Die cut another piece of white cardstock using the 2nd largest die from the same set and adhere it on the card base using double sided foam tape. Emboss a piece of white cardstock using Altenew Herringbone Tiles 3D Embossing Folder and then die cut it using the 3rd largest die from the same set and adhere it on the previous die cut.

Die cut a piece of white cardstock using the dies from Decorative heart die and ink it lightly with Mowed Lawn Diestress ink. Adhere it on the card as shown.

Stamp the images from Wicker Basket and Basket Blooms cling stamp sets on a piece of white cardstock using Jet Black Archival ink. Die cut then using matching dies from Wicker Basket and Basket Blooms Dies. Colour them using Zig Clean colour brush pens. Assemble and adhere them as shown to create a floral basket. Colour the bow with Brustro metallic watercolor to add shine. Adhere it on the card using double sided foam tape.

Other Products: Worn Lipstick and Mowed Lawn Distress inks, Large Oval makeup brush, Altenew Herringbone Tiles 3D Embossing Folder, double sided foam tape and Brustro Metallic watercolours.

Instructions:

Score and fold an 8” x 6.25” piece of white card in half at 4”, place the large tag die over the fold and die cut to create the shaped card base. Die cut a paper using the largest tag, adhere to a white card die cut of the same shape and adhere to the card base. Die cut a contrasting frame using the 2 tag dies and adhere around the edge of the card.

Stamp 2 of the stars using sweet plum ink, onto pale blue paper from the collection. Cover with clear embossing powder, remove excess and heat to set. Die cut 1 of the stars using the largest die and adhere to the of the card base.

Select a panel from the paper collection, trim to the required size, and use the smaller of the tag dies to die cut and shape the top. Adhere to a white die cut of the same size and Add to the card using foam pads.

Die cut the 2nd star using the centre die and off set this on to the centre of the first star, add a sparkly gem to the centre.

Die cut 2 of the holiday star tags:- 1 x white card and 1 x blue paper from the collection. Adhere the blue tag to the base of the card tucking it under the layered panel. Stamp the sentiment onto the white tag using elderberry ink and add to the card base using foam pads.

Stamp the snowflakes using blue danube onto white card and die cut. Adhere 5 to the card front.

Sponge dries clear adhesive over the front of the card and lightly sprinkle with transparent glitter.

Snip 3 of the fancy star sides remaining from the 2nd star die cut and tuck over the left edge of the card.

Other Products: White card, 10mm sparkle gem - The Hobby House, foam pads, clear embossing powder

Instructions:

Card size is 6 x 6”. Score and fold 12 x 6” white pearl metallic cardstock at 6” on the long side to create tent fold card base. Cut luxe silver cardstock x2 to 5 3/4 x 5 3/4” and cut white pearl metallic cardstock x2 to 5 1/2 x 5 1/2”. Adhere one of the white pearl pieces to one of the silver pieces and adhere to the inside of the card using a tape runner. Stamp the ‘Happy Holidays’ Sentiment from the Holiday Star Collection on this piece using Distress Oxide Wilted Violet ink. Stamp the bow from the Wicker Basket Cling Stamp set on the white pearl cardstock using the same ink, diecut using the coordinating die and adhere to the inside of the card over the sentiment. Emboss the second white pearl piece using an embossing folder (I chose one that reminded me of snow), adhere to the second silver piece and adhere to the card front using a tape runner. 

Stamp the wicker basket, handle and bow from the Wicker Basket Cling Stamp set, the blooms from the Basket Blooms Cling Stamp set, the snowflakes from the Large Holiday Star Cling Stamp set and the leaves from the Holly Berry Cling Stamp set on Luxe Silver Cardstock using VersaMark ink, cover with WOW Metallic Silver Sparkle Embossing Glitter and heat set using the Heat It Tool. Diecut using the coordinating dies. Diecut extra baskets and blooms x4 from white cardstock and adhere under the stamped basket and blooms for dimension. Adhere the blooms to the basket then adhere the handle. Adhere the basket and blooms to the card front using dries clear adhesive and dimensional squares. 

Using the Poinsettia & Holly Clusters Cling Stamp set, stamp the small poinsettias and holly leaves on white pearl metallic cardstock using VersaMark, cover with Wow Silver Sparkle Embossing Glitter and heat set using the Heat It Tool. Color the poinsettias with Distress Oxide Wilted Violet ink, buff with a paper towel and diecut the flowers and leaves with the coordinating dies. Place face down in the 3D Poinsettia Shaping Mold spritz with water and run through the diecutting Machine. Press down the centers of the poinsettias and holly and set aside to dry. Once dry, adhere two poinsettia petals to a holly leaf making sure to offset them. Add a little dries clear adhesive to the flower centers and add Silver Gala Glitz. Make twelve of these flowers – eleven for the basket and one for the bottom, next to the basket. Adhere the poinsettias with hot glue as shown. Add a few Holly Berry leaves to the bouquet and adhere the bow off center and at an angle onto the basket. 

Stamp the ‘Merry Christmas’ sentiment from the Holiday Star Cling Stamp set on white pearl metallic cardstock using Distress Oxide Wilted Violet ink and diecut using the Ticket and Tags Die. Adhere to the bouquet using hot glue and dimensional dots.

Adhere two snowflakes to the card front – one at the top left and one on the tag. 

Other Products: White Pearl Metallic Cardstock, Diecutting Machine, Misti, VersaMark, WOW Silver Sparkle Embossing Glitter, Paper Trimmer, Funnel Tray, Embossing Folder, Silver Gala Glitz, Tape Runner