Other Products: White cardstock, dimensional adhesive, hot glue, hot glue gun, scissors, funnel tray, paper trimmer, die cutting machine

For more tips on creating with the Summer's Garden Collection watch the tutorial at https://youtu.be/kYiP8qJZ4rE.

For more tips on creating with the tags & sentiments, watch the tutorialat https://youtu.be/eAfLuNkRda4.

Instructions: Cut a piece of white cardstock to 8 1/2 x 5 1/2" size, score and fold at 4 1/4". Stamp the smallest set of zinnia petals in Rose Madder on the top left and bottom right of card. Stamp off ink 1x on scrap paper beforehand. Use from the Album Tags and Accents Die to diecut the tag opening from front of card base. Pair the same die with eyelet frame to create a border from white cardstock and green paper from the Summer’s Garden collection. Cut two strips of 1 5/8 x 3/8 " coral paper from the collection. Lightly sponge the edges of card base with Vivid Chartreuse ink and Rose Madder. Lightly sponge the edges of strips with Rose Madder ink and attach onto left and right side of card as shown. Sponge edge of white frame with Rose Madder. Offset the frames onto card as shown. Lightly sponge some Rose Madder in a pattern inside the frames. Stamp the ‘Have a wonderful birthday’ in Rose Madder ink onto white cardstock and diecut with long banner die from Arrows and Banner Die set. Sponge edges of banner with Rose Madder ink and attach onto card as shown.

Stamp the 3rd largest and 2nd smallest zinnia petals 2x from Small Garden Zinnia Cling Stamp Set in Rose Madder ink onto flower shaping paper and diecut with coordinating dies. Stamp the same two sizes of zinnia petals again 1x, this time in Sunflower ink and diecut. Stamp the small zinnia petals again 2x, this time in Magenta Hue ink and diecut. Stamp both petal sizes again, this time in Leaf Green ink and diecut. Stamp the large leaf 1x and small leaf 2x from the Large and Small Garden Zinnia Cling Stamp Set in Leaf Green ink onto the flower shaping cardstock and diecut.

Use the Stack and Store daubers to color the flowers and leaves. Color the backside of coral petals with Rose Madder ink. Flip over and color with Pink Peony, followed a darker shading of Rose Madder and a pop of Sunflower. Color the backside of the yellow petals with Sunflower. Flip over and color with Buttercup and Sunflower ink. Color the backside of the pink petals with Cactus Flower. Flip over and color with Pink Peony, followed by a darker shading of Cactus Flower and a pop of Sunflower. Color the leaves with Vivid Chartreuse and a touch of Sunflower ink. Use a hydra sponge to apply a light touch of Crystal Lacquer over the petals and leaves.

Once petals and leaves are dry, use the zinnia shaping molds and shaping stylus to shape the petals. For one of the small coral zinnia petals, cut off petals and curl to form petals that are not fully open. These petals will go in the center of zinnia. Use hot glue to assemble the flower as shown. For the center, add some Dries Clear glue and sprinkle with prills. Shape the remaining petals into bud form, attaching the green petals around the base.

Attach the zinnia and leaves onto card with hot glue. Dab some Dries Clear glue onto a sponge, apply over edges of card and rest of card as desired, sprinkle with Rajni Chawla’s Crystal Clear and tap off.

Other Products: White Cardstock, Hot Glue Gun, Die Cut Machine, Dandelion Memento Ink, Flat Back Pearls

For more tips on creating with the Summer's Garden Collection watch the tutorial at https://youtu.be/kYiP8qJZ4rE.

For more ideas on creating with the Decorative Royale Square & Circle Dies, watch the tutorial at https://youtu.be/tqmtn_TiVVw.

Instructions: My finished card size is 6" x 6". I cut a piece of the flower shaping paper 6" x 12" and scored at 6". Fold to make card base. Using Sheet 8B of the paper collection use the scalloped edge die to cut a piece to add color to the card front. Glue down.

Next, using white cardstock, I cut out the decorative pieces of the dies leaving the center square in place to hold the sentiment. Glue this piece to the green layer and set aside. I glued the pearls next and left to dry. Stamp the sentiment using Vibrant Fuchsia ink and cut out using the square center.

Stamp the leaves with Fern Green Archival Ink and color using Leaf Green. Cut out using the coordinating die. Lay on the mold, spritz with water and run through the die cut machine. Turn out to dry. While the leaves are drying, stamp the flower petals using Rich Cocoa ink then color using various inks. Here is where you can select what color you like. Cut out the petals using coordinating dies. Lay onto the mold, spritz with water and run through the die cut machine. As you turn the petals out use the Deluxe Flower Shaping Kit to add a bit more dimension to them. Allow to dry. Layer up several petals and glue together. The more dimension the better. Next add prills to the center and allow to dry. This is the time to apply glitter with glue and the sponge. Once everything is dry, decide on placement and hot glue in place. The card is finished.

Other Products: White and yellow cardstock, dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine

For more tips on creating with the Summer's Garden Collection watch the tutorial at https://youtu.be/kYiP8qJZ4rE.

For more ideas on creating with the Decorative Royale Square & Circle Dies, watch the tutorial at https://youtu.be/tqmtn_TiVVw.

Instructions: Cut a piece of white card stock 12” x 6” and score at 6” mark on the score board. Fold to make a top fold card. Prepare a mat layer by cutting white card stock 5 7/8” x 5 7/8”. Add a dark purple pattern paper from paper collection smaller than this white mat layer. Adhere this on the card front using foam tape. Cut a 6” card panel design from paper collection. Mat it on white card stock leaving a very narrow border all around. Cut a Courtyard Elegance die cut in white card stock. Cut it to match the size of the second mat layer. Adhere on the second mat layer and adhere this whole panel on the card front using foam tape.

Stamp the Zinnia flowers from Small Zinnia cling stamp set with Magenta hue ink on deluxe flower shaping paper. For one flower, two big size, two medium and two small are needed. Stamp many small flowers for buds. Colour with vibrant fuschia and magenta hue inks. Cut with coordinating die and shape in 3D flower shaping mold. Layer the flowers together. Add stamens in the centre of buds. Make leaves using the Library ink and leaf green ink. Colour them using sponge dauber and shape them in 3D flower shaping mold.

Cut an oval frame in deep pink colour background paper from paper collection. Cut out the centre die cut from Elaborate ovals frame die. Add some pink colour in the centre and add a sentiment. Add the oval frame in the centre of the card and then place the sentiment tag.

Arrange the flowers and leaves on the card front.

Other Products: White Heat Embossing Powder from Rangers, Hero Arts Die Cutting Machine, Score Board, Foam tapes, Hot glue, Smooth White Cardstock

For more tips on creating with the Summer's Garden Collection watch the tutorial at https://youtu.be/kYiP8qJZ4rE.

For more tips on creating with the Cascading Petals Collection watch the tutorial at https://youtu.be/DqhvfrsTI00.

Instructions: The ready top fold card from smooth card stock measures 7" by 7". To prepare the card front, choose a 6" by 6" card panel and distress all the edges with sharp scissors. Mat a layer of the white cardstock making a delicate frame of 1/16" on all sides. Next, choose an orange color paper from the designer paper collection and layer it behind creating another border of 1/4" on all sides. Finally, layer the prepared panel on the ready card base.

Choose a scenic paper from the paper collection and cut the solid circle using the largest die of Eyelet Circle and Basics Small Die set. Using the outer two dies of the same die set, cut 2 frames from white cardstock and glue them together. Adhere this frame around the scene to create a window as shown.

Arrange the ready window frame in the center of the card panel keeping 2 white die cuts of Swirly Accent Spray Die behind the circle frame.

For the foliage, stamp Leafy Accent stamp set using white pigment ink on vellum cardstock, sprinkle white heat embossing powder, and dust extras. Heat set the stamped images using a heat gun and cut them using the coordinating die set. Cascading Wisterias are first stamped with Magenta Hue, cut with the coordinating die and then color using Cactus Flower. Once all colored, then shape using Deluxe Flower Shaping Kit.

For Zinnia Flowers, stamp a couple of images from the Small Zinnia stamp set with Cactus Flower and cut them using it's coordinating die. Color the centers using magenta Hue and rest of the flower petals using Cactus Flower. Add highlights using Plum archival ink and shape them using shaping tools. Form 1 large and two small flowers. Once all the elements are ready, assemble a small bouquet with the help of hot glue and complete the card by adding some glitter and a sentiment.

Other Products: Smooth White Cardstock, dimensional tape, Hot glue

For more tips on creating with the Summer's Garden Collection watch the tutorial at https://youtu.be/kYiP8qJZ4rE.

Instructions: Ready side fold card measures 7” × 7". First choose paper from designer paper collection measuring 6.75" × 6.75", distress edges and mat it on ready card base in tilted manner. Cut an eyelet square from white cardstock and cut it into half diagonally. Choose another paper from designer paper collection measuring 6.5" × 6.5". Glue eyelet square pieces from back side as shown in the picture. Adhere it on card using dimensional tape in tilted manner.

Die cut pattern paper and white cardstock using Heart of Joy Decorative die and arrange them on card as shown in the picture. Cut an eyelet circle from white cardstock and stamp sentiment using cactus flower on it. Glue it on card using dimensional tape. Cut 2 corners from gold luxe cardstock using Swirly Accent Spray die and glue as shown.

For flower, stamp zinnia flower on deluxe flower shaping paper using cactus flower ink and cut with coordinating dies. Paint flowers using magenta hue and cactus flower ink and shape using flower shaping mold. layer flowers and glue using hot glue and add prills using hot melted glue. Stamp leaves using fern green ink and cut with coordinating die. Paint leaves using same ink and shape using shaping mold. Arrange flowers and leaves using hot glue. Tie a bow using organza ribbon and glue it as shown and add a decorative button. For finished look apply Frosting Powder on flowers and leaves using clear dry adhesive.

Other Products: Hot glue, die cutting machine, silver cardstock

For more tips on creating with the Summer's Garden Collection watch the tutorial at https://youtu.be/kYiP8qJZ4rE.

For more ideas on creating with the 5 x 7 Decorative Frame Dies, watch the tutorial at https://youtu.be/qdBFA5VpmSo.

Instructions: Card size is 7.25” x 5.25” on white cardstock. From the HCD2-730 Eyelet Rectangle & Basics set, cut a 5" x 7" rectangle from the paper collection and glue it to the base. Cut a 4.75 " x 6.75" frame of silver paper from the same set of dies and glue them. Cut out the largest frame from the HCD2-7308 Majestic Swirl Frames Die set from the paper collection and white paper. Glue the white frame underneath the colored frame so that it protrudes a little. Glue to the paper. Cut the largest frame from the HCD1-7305 Ornate Ovals Die set from silver paper and glue. Cut a smaller frame from the same set of cutting dies from the paper collection and from white, glue white underneath. In the middle, stamp the sentiment from the HCPC-3901 Fresh Cut Hydrangea Cling Stamp Set and glue.

To create flowers, stamp with Archival Ink - Rose Madder and Archival Ink Pad – flowers from the HCPC-3924 Small Garden Zinnia and HCPC-3923 Large Garden Zinnia sets then die cut using the coordinating dies. Color them with the Archival Ink - Rose Madder and shape using the Mold. Glue the petals with hot glue. In the middle of the flower, put some glue inside and add ANC818 Go Man Go Prills. Stamp the leaves from the same set with Archival Ink -Leaf Green and cut with matching dies, then color with the same ink and shape using the Mold. I cover the flowers and leaves with glue and cover them with Rajni Chawla's Crystal Clear.

Glue all the elements as pictured.

Other Products: Twine, gold sequin, hot glue

For more tips on creating with the Summer's Garden Collection watch the tutorial at https://youtu.be/kYiP8qJZ4rE.

Instructions: Cut the image from sheet 9A with scissors and glue to a slightly larger rectangle prepared from sheet 5B. Fix the whole on a double base.

Create a composition of small and medium zinnia and zinnia buds. Stamp images of zinnia flowers and leaves on Deluxe Flower Shaping paper. Apply with applicator, shades of pink ink on flowers and green on leaves. Shape in the mold intended. Add a little glue to the center of each flower, combine 4 or more zinnia petals together. Wait for the glue to dry. Make a hole inside, use a mat and a special tool for it, then pass the stamens. Underneath, connect with hot glue.

Arrange the composition as shown. Finish with a white twine and gold sequin.

Other Products: White cardstock

For more tips on creating with the Summer's Garden Collection watch the tutorial at https://youtu.be/kYiP8qJZ4rE.

For more ideas on creating with the 5 x 7 Decorative Frame Dies, watch the tutorial at https://youtu.be/qdBFA5VpmSo.

Instructions: Stamp the Large Garden Zinnia Cling Stamp – three times the biggest one and Small Garden Zinnia Cling Stamp – two the biggest and the smallest one on white paper with Ranger Archival Ink Pad - Red Geranium and cut using the coordinating dies. Color with Ranger Archival Ink Pad - Red Geranium. You will need 2-3 petals for each size. Place the flower petals into the mold face down and sprinkle water on. Go through machine and run through cutting/embossing machine. Wait to dry. Make sure petals placing offset to create flower. Using Ribbit Prills to fill the center flower. Sponge the petals and leaves with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Stamp the leaves using Large Wild Rose Cling Stamp Set on the Deluxe Flower Shaping Paper with Ranger Archival Ink Pad - Leaf Green, cut out with the coordinating die, shade use this same ink and shape. Shape leaves using Mold as shown on the video. Adhere the flowers and leaves  to card using a hot glue gun.

Create card base using white paper and Decorative Circle Frames Die. To create top base, cut Decorative Circle Frames Die from Summer's Garden Paper Collection and place on the base of card. Cut from gold paper using the Decorative Circle Frames Die and Decorative Circle Frames Die as shown and adhere to the card base using 3D foam tape for dimension.

Fussy cut a sentiment ticket from paper collection and place onto the card using adhesive foam strips. Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

Other Products: Sheer Shimmer Spritz – Sparkle, Small Dimensional Dots, White Cardstock, Wink of Stella, Hot Glue Gun, Green cord, Dimensional Squares.

For more tips on creating with the Summer's Garden Collection watch the tutorial at https://youtu.be/kYiP8qJZ4rE.

For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.

Instructions: Card size is 6 x 6". Score and fold 12 x 6” white cardstock at 6” and 9” to create base for easel. Cut white cardstock to 6 x 6”. Use the plain Petite Pocket Accents Die to cut the top of the white panel. Cut designer paper to 5 7/8 by 5 7/8” and use the same die to cut the top. Cut 6 x 6” panel from designer paper sheet 11A, trim to 5 7/8 x 5 7/8” ink the edges using Archival Tea Rose ink and adhere to the inside bottom of the card base. Cut three pieces of matching paper to 5 7/8 x 2 7/8”, ink the edges and adhere to the card base. Diecut both of the decorative Petite Pocket Accents Dies from white cardstock and adhere together. Sponge with dries clear adhesive and sprinkle with Rajni Chawla’s crystal clear glitter. Ink the edges of the shaped designer paper, adhere to the shaped white panel and then adhere the glittered Petite Pocket Accents diecuts to the top of the panel. Adhere the panel to the three inch folded section of the card base to form the easel.

Diecut the ornamental tag two times from white cardstock and adhere together, one upside down. Sponge with dries clear adhesive and sprinkle with Rajni Chawla’s crystal clear glitter. Stamp ‘Happy Birthday’ using Coastal Coral ink on white cardstock and diecut using the plain ornamental tag. Adhere the tag as shown.

Stamp the small and Large Zinnias 3x each on Deluxe Flower Shaping Paper using Archival Tea Rose ink. Color them using Archival Tea Rose, Buttercup and Coastal Coral inks, diecut using the coordinating dies and ink the edges with Tea Rose. Stamp some of the smallest flowers using Archival Buttercup, color with the same ink, diecut and lightly ink the edges using Coastal Coral ink. Stamp the leaves using Archival Olive ink, color using Vivid Chartreuse, diecut and ink the edges using Olive ink.

Shape all of the flowers in the Large and Small Zinnia Shaping molds and finish shaping using the Deluxe Flower Shaping Kit and the Groove Golf Tool set. Spray all the petals with Sheer Shimmer Spritz – Sparkle. Use three petals the same size, one petal one size smaller and one of the small buttercup petals for each of the Coral flowers. The small coral flower just has three coral petals. Adhere the petals together using hot glue. Build up the flower by adding a little puddle of hot glue between each layer and letting it set before adhering the next layer. Add a puddle of hot glue to the flower centers and add the Heart of Gold prills.

Adhere the flowers and leaves to the card front using hot glue. Brush some Wink of Stella here and there on the flowers to create even more shimmer. Tie a bow using the green cord and adhere as pictured. Make small loops with the cord and adhere around the large flower.

Other Products: Heavy cardboard, Distress Oxide inks – Wild Honey, Candied Apple, Twisted Citron, Mowed Lawn, Hero Arts Embossing & Watermark ink, hot glue gun, Reeves Gloss Gel

For more tips on creating with the Window Scene cards & dies, watch the tutorial at https://youtu.be/LnM95GR92ao.

For more ideas on creating with the Decorative Royale Square & Circle Dies, watch the tutorial at https://youtu.be/tqmtn_TiVVw.

Instructions: Cut a piece of Deluxe flower Shaping Paper 12” x 6”, score at 6” along the long side and fold to create a base card 6” x 6”. Cut a piece of dark orange patterned paper 6” x 6” and adhere to the front of the card. Using the Number 2 die from the HCD1-7283 Courtyard Elegance Die,, cut a 5 3/4” x 5 3/4” square from a piece of lighter orange patterned paper. Die cut the decorative outer die using the No 2 and No 3 dies from the HCD1-7283 Courtyard Elegance Die set out of gold cardstock and adhere to the front of the patterned paper. Adhere this to the front of the card using heavy cardboard. Die cut the decorative round No 2 die from the HCD1-7271 Rounded Window Die set and adhere to the front of the card with heavy cardboard. Die cut the eyelet circle out of light orange patterned paper using the eyelet circle from the HCD1-7154 Eyelet Circle & Basics Die set and adhere to the front of the decorative round die. Die cut the sentiment out of Gold Luxe cardstock using the sentiment die from the HCD1-7203 Ornamental Tags Die set and adhere to the centre of the circle as shown.

Stamp the leaf images from the HCPC-3923 Large Garden Zinnia Cling Stamp Set and the HCPC-3924 Small Garden Zinnia Cling Stamp Set in embossing ink on vellum and heat emboss with white embossing powder. Colour with Twisted Citron and Mowed Lawn inks on the front of the images and die cut with the coordinating dies. Spritz on the back of the leaves with water and then shape using the golf tool. Add Crystal Clear glitter with some gloss gel on a paint brush and adhere to the top left and bottom right as shown.

Stamp the flower images from the HCPC-3923 Large Garden Zinnia Cling Stamp Set and the HCPC-3924 Small Garden Zinnia Cling Stamp Set in embossing ink on vellum and heat emboss with the white embossing powder. Colour the front of the larger images with Wild Honey ink in the centres and Candied Apple ink on the outside of the petals and the smaller images with Wild Honey ink only and die cut with the coordinating dies. Spritz the back of the petals with water and then shape using a golf tool. Assemble the flowers using a hot glue gun as shown. Pierce the centres with the sharp end of a golf tool and insert the yellow stamens with a wire. Fasten with Dries Clear glue and trim the threads. Add Crystal Clear glitter to the flowers with gloss gel on a paintbrush. Adhere over the leaves over the top left and bottom right as shown.

Other Products: White cardstock, Acrylic Shimmer additive, Pan Pastels: orange, pink, blue.

For more tips on creating with the Summer's Garden Collection watch the tutorial at https://youtu.be/kYiP8qJZ4rE.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

For more ideas on creating with the 5 x 7 Decorative Frame Dies, watch the tutorial at https://youtu.be/qdBFA5VpmSo.

Instructions: Card size: 5 x 7”. Cut a white base and white decorative die using the Decorative Circle Frames Die, this will be the base. Fold it in half lengthwise. Using white cardstock also cut the large decorative circle of the Rounded Window Frame, now cut out the center using a circle die. Cut the decorative circle part of the Courtyard Elegance Die and an Eyelet circle from the Eyelet circles die (cutting away the inside with a small circle. Glue the decorative circle and the eyelet circle together. Cut an extra center (square) of the decorative circle part of the Courtyard Elegance then turn it to a diamond and glue onto of the square center. Glue circles on top of the base making sure to only apply glue where it hits the base. Cut pearl swirls as needed and add them to the card. Keep backing on the parts that do not touch cardstock (it is a bit of a pain but looks cool).

Stamp Zinnia using Buttercup, Tiger Lily and Rose Madder, sponge with like colors then die cut. Stamp leaves with Fern Green, sponge with Leaf Green then die cut. Shape leaves and Zinnia in molds, use Groove Golf Tools for center Zinnias. Glue 4-5 layers together to make flowers. Glitter the flowers, add Prills to the centers then arrange on right side of card. Mix Lacquer and Shimmer additive together and brush onto leaves. Insert leaves where needed.

Stamp the butterfly (x2) using embossing fluid and white powder then heat set. Die cut and color the backs with Pan Pastel chalks (or other). Cut just orange and pink portion of 1 butterfly then glue it on the front edges to the whole butterfly (leave backs of wings free). Glitter the butterfly (light on the adhesive so that vellum does not curl). Then glue the body only to the left side of card. Stamp the sentiment using Tiger Lily then die cut with the Arrows and Banners Die. Glue it to card, glitter the card.

Other Products: Diamond Dust, White Cardstock, Big Shot Machine, Glue Gun.

For more tips on creating with the Summer's Garden Collection watch the tutorial at https://youtu.be/kYiP8qJZ4rE.

Instructions: Card size is 6”x 6” (final Size). Cut Pattern paper from the collection, smaller than the card size, tear the edges and adhere it on the card base.

Cut One Die from Decorative Circle Frames Die HCD2-7306 on the pattern paper from the collection and with same die cut one more die on gold cardstock. Take another layer of die from Ornate Oval Die HCD1-7305 on white cardstock Take another Royal Elegance Frames Die HCD2-7307 and cut them on white cardstock and gold cardstock and assemble all these die cuts as pictured. Stamp Sentiment from Special Birthday Sentiments on the top layer using archival ink-carnation red.

Stamp some flowers and leaves from Large Garden Zinnia Cling HCPC-3923 and Small Garden Zinnia Cling Stamp Set HCPC-3924 on deluxe flower Shaping Paper using archival ink-carnation red and Library Green. Cut them with coordinating Die HCD1-7314, HCD1-7315. Color them using archival ink-Sunflower and leaf green. Next emboss them using Mold. After arranging layer add some prills at the center of flowers. Add Diamond Dust randomly.

Other Products: Ribbon; Die Cut Machine;

For more tips on creating with the Summer's Garden Collection watch the tutorial at https://youtu.be/kYiP8qJZ4rE.

For more ideas on creating with the Decorative Royale Square & Circle Dies, watch the tutorial at https://youtu.be/tqmtn_TiVVw.

Instructions: Prepare a white 6 x 6” card base. Cut a piece of the Summer’s Garden 10B slightly smaller.

Cut out 2 of the Rounded Scallop Windows, adhere to the center of the card. Wrap a piece of the white ribbon around and adhere to the card base. Cut out a circle using the largest die from the Eyelet Basic Circles Small, add D-Dots to the back and adhere on top of that one. Cut out one of the Rounded Window Frames using the 2 smallest ones from the set and adhere on top of the circle.

Make the bow and adhere to the left side of the card as shown.

Stamp the flowers on white with the Tangelo and color in with the Cantaloupe, cut out with the coordinating die, ink the edges with more of the Tangelo, place in the matching mold and run through the die cut machine to shape. Stamp the leaves on the white with the Bamboo Leaves and color in with the New Spout, cut out with the coordinating die, ink the edges with more of the Bamboo Leaves, place in the mold and shape. Stamp the smallest flowers from the Large Zinnia set with the Sunflower and color with the Buttercup. Cut out with the coordinating die, place in the mold to shape.

Arrange and adhere the leaves and flowers on the card using hot glue. To finish, add hot glue in the center of each flower topped with Prills. Add glitter to all the flowers and leaves.

Other Products: Off White pearl cardstock, hot glue, Archival ink pad - Dandelion, distress ink mowed lawn, hot glue gun, dimensional adhesive, acrylic block, scissors, funnel tray, die cutting machine, Nida Tanweer Magic Glitter Powder, Distresser Tool.

For more tips on creating with the Summer's Garden Collection watch the tutorial at https://youtu.be/kYiP8qJZ4rE.

Instructions: For the card base, cut a piece of Deluxe Flower Shaping cardstock to 11.6" x 8.8” size, score and fold in half. Trim green paper piece from Summer's Garden Paper Collection to size 8.6” by 5.6” rough the edges using distresser tool. Trim pink paper from same paper collection to size 8.4” by 5.4” rough the edges using distresser tool. Adhere pink paper on to the green paper using dries clear glue and adhere this panel on card base using dimensional tape.

Next, cut Eyelet Lace Frames Die from Summer's Garden paper collection (1x) and (3x) on Deluxe flower shaping paper. Adhere paper collection cutout frame on to the white frame using clear glue, and layer extra 2 frames underneath with this layer using dimensional tape. Adhere this frame on the card front as shown. Stamp ‘I Appreciate You So Much’ sentiment in the center using black ink.

For the Zinnia flowers, Stamp the 3rd largest (3x), 2nd smallest (2x) from Small Garden Zinnia Cling Stamp Set in Archival Dandelion Ink on off-white cardstock and diecut with coordinating dies. Stamp 1st smallest zinnia petals (8x) in leaf green ink on off-white pearl cardstock and diecut with coordinating dies. Stamp 2nd smallest (3x) using Vibrant Fuchsia ink. Stamp small leaves (3x) using leaf green ink. Stamp the leafy accents from leafy accents stamp set with leaf green ink and color leafy accents and zinnia small leaves with Vivid Chartreuse ink and diecut using coordinating dies. Shade edges with mowed lawn ink.

Use the Stack and Store daubers to color the flowers and leaves. Color the backside of the flower with same ink that is on the front of the flowers and smallest petal with Vivid Chartreuse ink. Shade small lady bud using zig markers.

Use the zinnia shaping molds and shaping stylus and groove golf tools to shape the petals. Use hot glue to assemble the flowers as shown. For the center, add some Dries Clear glue and sprinkle with prills.

Attach the zinnia and leafy accents onto card with hot glue. Dab some Dries Clear glue onto a sponge, apply over card as desired, sprinkle with Nida Tanweer Glitter Powder and tap off.

Other Products: 8” white card base, foam pads, organza ribbon, white cardstock

For more tips on creating with the Summer's Garden Collection watch the tutorial at https://youtu.be/kYiP8qJZ4rE.

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: Cut a paper from the collection slightly smaller 8” square, edge with gray ink and adhere to the card base

Adhere a white die cut of the royal elegance frame to the right side of the card. Select and cut the panel from the paper collection, adhere to a slightly larger coordinating paper and adhere slightly offset onto the royal elegance frame using foam pads.

Make the zinnia: Stamp the petals using morocco ink and die cut. Colour the reverse and the front from the edge, fading the ink into the centre, using the morocco ink. Place face down into the mold and spritz with water, run through the diecutting machine to shape. Layer the petals together using hot glue threading a single stamen in the smaller flowers and 3 in the centre of the large flower.

Make the leaves: Stamp the large and small leaves onto green paper from the collection using bamboo leaves ink. Diecut and add shading to the edges of the leaves with the bamboo leaves ink. Run through the die cutting machine to shape.

Make the wild roses: Stamp onto the flower shaping paper using Sweet plum ink. Add cantaloupe ink to the centre of the flowers and colour the petals using lulu lavender. Die cut and add sweet plum to the outer edges of the petals. Place the flowers face down into the mold and spritz with water. Place the top of the mold onto the flowers and run through the diecutting machine to shape. Add additional dimension to the edge of the leaves using the golf tools. Allow to dry.

Die cut the best wishes using white card, cut a solid circle tag and adhere the 2 together. Tie organza ribbon through the tag and secure at the top. Die cut 2 Swirly border accents using coordinating paper.

Arrange and adhere the leaves, flowers and swirly borders onto the card base using hot glue. Drop hot glue into the centre of the wild roses, cover with prills and remove excess. Sponge dries clear glue over the flowers and sprinkle with glitter.

Other Products: Dimensional adhesive, hot glue, hot glue gun, paper trimmer, die cutting machine, adhesive backed craft foam, white cardstock

For more tips on creating with the Summer's Garden Collection watch the tutorial at https://youtu.be/kYiP8qJZ4rE.

For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.

For more tips on creating flowers with the shaping mold watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Create a 5 x 7 inch card base with white cardstock. Cut a 5 x 7” green paper piece from the Summer's Garden Paper Collection, distress with Bamboo Leaves and adhere. Cut out two of the Ornate Pocket Accents Die in white cardstock and adhere one to top and bottom. Cut out a purple piece of designer paper 4 x 5.5 inches, distress with Vibrant Violet and adhere. Cut out the vertical butterfly panel from the paper collection, distress with Vibrant Violet, adhere to adhesive backed foam cut to fit and adhere to card front.Cut out the sentiment from the Ornamental Tags Die in white cardstock, cut out the frame in lavender designer paper and adhere together, and then adhere to card front as shown.

Stamp the Large and Small Garden Zinnia stamps in Vibrant Violet ink on Deluxe Flower Shaping Paper, and the small zinnias in Buttercup, sponge with same and cut out with coordinating dies, sculpt with Large and Small 3D Zinnia Shaping Mold, add prills or stamens and glitter.

Stamp the leaves from the Small Zinnia Stamp sets in Bamboo Leaves, sponge with same and cut out with coordinating dies, sculpt with Small Zinnia Shaping Mold.

Stamp the large ladybug from the Large Garden Zinnia Stamp set in Black, cut out with coordinating dies, sponge with black and Vermillion and sculpt with coordinating 3D Zinnia Shaping Mold. Stamp the leaves from the Leafy Accents Cling Stamp Set in Bamboo Leaves, sponge with the same and cut out with coordinating dies, sculpt with 3D Leafy Accents Shaping Mold.

Adhere as pictured.

Other Products: Die Cutting machine, Trimmer or Guillotine, Scoreboard, Scissors, Bone folder, Memento Dye Ink Pads - Angel Pink, Grape Jelly, Pear Tart; self adhesive gems, silver cardstock

For more tips on creating with the Summer's Garden Collection watch the tutorial at https://youtu.be/kYiP8qJZ4rE.

Instructions: Box measures - 4 1/2 x 41/2 x 4 inches. To create a box - die cut six side pieces and one base piece from White card using Treasured Heart Gift Box Die, then die cut matching pieces of Paper Collection using the Stairway Gardens Die HCD1-7281. Cut out 21/8” x 21/8” pieces of Paper Collection and distress them with Memento Dye Ink Pad - Elderberry using Daubers. Adhere lacy squares to the inked squares using Dries Clear glue with a metal tip, then fold using a bone folder along the score lines. Cut out a piece of one rounded flap and then cut out the opposite full rounded flap from the opposite side of the box. Assemble box. Die cut base piece from white card and one side piece of white card using Treasured Heart Gift Box Die. Cut out half of the side piece and adhere it to the base piece, then adhere the final piece to the box base. Die cut two base pieces fromPaper Collection using Treasured Heart Gift Box Die and adhere them on the top and bottom of the lid. Die cut 6 rounded flaps of Paper Collection using Treasured Heart Gift Box Die and adhere them to the flaps inside the box and on the closing element of the lid. Die cut 5 decorative hinges from Paper collection using Window Hinges Die HCD1-7285 and adhere them to the box. Die cut the 5 nesting hinges from Paper Collection using Window Hinges Die HCD1-7285 and adhere them to the box as shown. Decorate each of the hinges with a self-adhesive gem. Die cut decorative locker elements from Paper Collection using Window Hinges Die HCD1-7285 and adhere to the front of the box as shown. Die cut doily from silver cardstock using Butterfly Kisses Decorative Die HCD1-7179 and adhere it on the top of the box.

Stamp the leaf images of HCPC-3924 Small Garden Zinnia Cling Stamp Set on HCPP1-475 Deluxe Flower Shaping Paper with Memento Dye Ink Pad - Bamboo leaves, then colour the image with Memento Dye Ink Pads - Bamboo leaves and Pear Tart using HCDA1-449 Daubers. Die cut using a matching die of HCD1-7315 Small Garden Zinnia Die, then place them in HCFB1-492 Small 3D Zinnia Shaping Mold, spray them with water and run them through a die cutting machine.

Stamp Zinnia images of HCPC-3924 Small Garden Zinnia Cling Stamp Set on HCPP 1-475 Deluxe Flower Shaping Paper with Memento Dye Ink Pad - Elderberry, then colour the images with Ranger Archival Ink Pad - Vibrant Fuchsia RACP524 and Memento Dye Ink Pads - Angel Pink, Grape Jelly and Elderberry using HCDA 1-449 Daubers. Die cut the images with matching HCD1-7315 Small Garden Zinnia Die, then place them in HCFB1-492 Small 3D Zinnia Shaping Mold, spray them with water and run them through a die cutting machine. Assemble Zinnia flowers petals using a hot glue gun. Apply glue using a hot glue gun on the centre of the flower and sprinkle it with Gilt Trip Prills ANC805 ANC825.

Using a sponge add Designer Dries Clear Adhesive to the flower petals and sprinkle them with Crystal Ultrafine Transparent Glitter 1/2 oz. 85-glitter, and apply 3-D Crystal Lacquer 4 oz 3D1844 on flower petals, then adhere flower to the box and fill in the composition with leaves.

Other Products: Dusty Concord Distress ink, foam adhesive, yellow, pink, transparent and purple glitter, silver cardstock.

For more tips on creating with the Summer's Garden Collection watch the tutorial at https://youtu.be/kYiP8qJZ4rE.

Instructions: Card Base: Cut a 5 3/4" x 5 3/4" piece of pattern paper from Summer's Garden Paper Collection and cut the house image from that using the die from Eyelet Oval and Basics Large Dies. Die cut a piece of silver cardstock using the largest die from Ornate Ovals Die. Adhere the house image on this silver die cut.

Adhere the 5 3/4" x 5 3/4" piece of pattern paper on a 6" x 6" white card base and adhere the silver die cut using foam adhesive on top so that it covers the oval cut in the pattern paper. Apply little dots of Designer Dries Clear Adhesive and sprinkle yellow, purple and pink glitter on top of similar colored flower vines.

Purple flowers: Stamp the smallest size of Zinnia from Small Garden Zinnia Cling Stamp Set on a sheet of Deluxe Flower Shaping Paper with Deep Purple Archival Ink. Ink the flowers with Dusty Concord Distress ink. Die cut the flowers using the matching die from Small Garden Zinnia Die. Shape them using Deluxe Flower Shaping Kit and Groove Golf Tool Set. Add few yellow stamens from Small Pastel Pearl Stamens to the flower centers.

Yellow flowers: Stamp the flowers from Wisteria Petals Cling Stamp Set on a sheet of Deluxe Flower Shaping Paper with Buttercup Archival Ink. Ink them with the same ink and die cut them using matching die from Wisteria Petals Die. Shape them using Deluxe Flower Shaping Kit. Add a pink stamen from Medium Pastel Pearl Stamens to the flower centers.

Adhere the flowers as shown around the oval die cut to finish the card.

Other Products: Beads, Gems, Cardstock- White, Word Sticker, Distress Oxide Ink (Fossilized Amber, Wilted Violet, Peeled Paint), Scrapbook Adhesives by 3L (Dual Tip Glue Pen, Creative Photo Corners White, Adhesive Dots Medium, E-Z Runner Ultra, 3D Foam Squares, Crafty Foam Tape)

For more tips on creating with the Summer's Garden Collection watch the tutorial at https://youtu.be/kYiP8qJZ4rE.

For more ideas on creating with the 5 x 7 Decorative Frame Dies, watch the tutorial at https://youtu.be/qdBFA5VpmSo.

Instructions: The purple bordered patterned paper is the background. Cut a strip of the green patterned paper that is 1.5 x 10” and flag both ends. Adhere up the side of the layout using foam tape. Die cut the decorative circle die from white cardstock, and then the mat for it from purple patterned paper. Adhere them together and add to the layout on the green strip using foam tape. Crop and mat the photo in white cardstock and using white photo corners. Add to the decorative mat using foam squares. Add gems to the top and bottom of the decorative die.

When I create photos, I like to stamp at least 2 sets of each flower size in each color. That is what I did with these purple flowers. Stamp 2 sets of each size of flower and leaves onto Deluxe Flower Shaping Paper using Staz On Ink (Timber Brown). Add color to the flowers using ink and daubers. The middle of each is Distress Oxide Fossilized Amber and the petals are Wilted Violet. The leaves are colored using Peeled Paint. Die cut all, and shape using the coordinating Shaping Molds.

Assemble the flowers and add beads to the middle of each using a liquid adhesive. Let dry completely. Add clusters of the flowers to the left- and right-hand side of the matted photo using adhesive dots. Then add the leaves. The title sentiment is a foam word sticker and was added to the right of the matted photo in amongst the flowers.

Other Products: Inks: Mist sprays- Green, Yellow, Lilac. Versa-mark, Nuvo crystal drops-Chocolate Fudge, Foam Inking tool, White card stock, Hot glue gun, Diamond stickles, Fussy cutting scissors, Double sided tape, Double sided foam tape.

For more tips on creating with the Summer's Garden Collection watch the tutorial at https://youtu.be/kYiP8qJZ4rE.

Instructions: This card base measures 6 3/4” x 6 3/4” (17.2cm x 17.2cm)

To make the tent fold card base, use the white card stock and cut two card pieces to the above measurements. Using the scor-pal make a fold at 1/2” (1.5cm) below the edge on one of the cards. Apply double sided tape to this and adhere both cards together. This forms your tent fold card base.

Find the sheet 4a in the paper collection. Fussy cut the cottage in the frame. Use the remaining paper to cut a matting a little smaller than the card base. Cut from the remaining paper a matting about 4” x 3” (10.5cm x 7cm) distress the edges of these papers with the back of the scissors and curl the edges up a little. Adhere to the card base using the double-sided 3D tape to raise the papers. Fussy cut the butterflies in the papers. Apply clear drying adhesive to the butterflies using a hydra sponge then dip the butterflies in to the glitter. When dry, adhere to the card front using the hot glue gun.

Make the sentiment by stamping the sentiment first with the versa-mark then with the gold embossing powder. Set with the heat it tool. Cut this to a banner then apply versa-mark to the edges, dip into the gold powder then set it with the heat it tool. Curl the banner then adhere to the card front. Use the Nuvo crystal drops at each end of the banner.

To make the Zinnia flowers: Using the flower shaping paper, library green ink and the Zinnia stamps and dies. Prepare enough for three sized Zinnias. Each flower is made with two larger petals a smaller sized petal. Spray the petals on both sides with the mists, then bring shape to the petals by using the matching molds. The centers are made using the smaller petal, cut the petals away from the petal center then curl these with a groove gulf tool end. Adhere all the petal layers together then the flower centers using the hot glue gun. Adhere one for one the curled petal for the center so they stand up in the center of the flower. Adhere the Zinnias to the card front using the hot glue gun. Make three leaves and add these under the flowers. To finish the card off, apply the diamond stickles to the flowers on the cottage wall and flower centers in the paper print.

Other Products: Die cutting machine Cut’n’boss, cheesecloth, water mister, hot glue gun, hot glue, scissors, sequins, ribbon, my minds eye word sticker, Prima lace, little B corrugate tape, memento dew drop grape jelly ink, funnel tray

For more tips on creating with the Summer's Garden Collection watch the tutorial at https://youtu.be/kYiP8qJZ4rE.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: The finished card measure 4 1/2 x 7". Cut a piece of paper in white cardstock 9 x 7 inches. Fold to made a top folding card. Cut one piece of 6 7/8 x 4 1/4 in sheet #11B. Ink the edges of the card with the Coastal Coral ink and a dauber. One piece of 6 1/2 x 4 1/8 in white cardstock. One piece of 6 3/8 x 3 7/8 in sheet #12B. One piece of 6 1/8 x 3 5/8 in white cardstock. And finally one piece of 5 7/8 x 3 1/2 in sheet # 9A. Ink the edges of the last paper with the Coastal Coral ink and a dauber.

Cut a white cardstock with elaborate oval frame die, glue it onto the front. Also cut in corrugated tape a strip of 6 1/2 long and also glue it in the frame.

Stamp your flowers with grape jelly ink onto white flower shaping paper, color the center with coral ink and shade the rest of the flower using grape ink. Color the reverse of the flowers and diecut with the coordinating die. Place face down into the flower shaping mold, spritz with water and run through the diecutting machine to shape. (Do the same thing for the leaves and use the green ink vivid chartreuse). When dry, give further shape with Deluxe flower shaping kit tools. Put glue in the center of the flowers and add coral prills. (I used 3 largest flowers plus 1 smaller for each flower). Take two of the smaller flowers and color i with the same colors. Use the tool to shape the petal to make a flower bud.

Put cheesecloth and sewing thread in the center of your card and glue your flowers and leaves over it. With the hydra sponge, put some glue on your flowers and then add glitter on it. Add your sentiment to the right side of the card. To add the finishing touch, simply add sequins and lace!

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, sisal, self-adhesive crystals

For more tips on creating with the Summer's Garden Collection watch the tutorial at https://youtu.be/kYiP8qJZ4rE.

For more tips on creating with the Lush Lilac collection, watch the tutorial at https://youtu.be/KDbdzC0MnAI.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Cut a piece of white cardstock to 8 1/4 x 11" size, score and fold at 5.5. Cut a piece of patterned paper from the Summer's Garden paper to 5 5/16 x 8 1/16" size. Adhere it to the base. Cut a piece of the Summer's Garden paper to 4 5/8 x 6 3/4" and a little bigger piece of white cardstock. Glue them together and attach them to the base using adhesive foam. Diecut three frames with Ornate Ovals dies from the white cardstock and the oval from the Summer's Garden paper. Using adhesive foam adhere all elements to the card as pictured. Stamp the sentiment in Red Geranium ink and cut it out.

Stamp blossoms from Small and Large Garden Zinnia Cling Stamp Sets in Red Geranium and Buttercup inks onto Deluxe Flower Shaping paper and diecut with coordinating die. You`ll need 18 zinnia flowers, two petals for each flower and 11 lilac flowers. You`ll also need 5 big and small zinnia leaves, about 13 leaves from Oakberry Lane Blossoms Set, about 7 branches from the Festive Winterscapes set and 2 branches from Lush Lilac set. Stamp them in Leaf Green ink and cut out with coordinating dies. Use the Stack and Store daubers to color all flowers and leaves. For flowers use Red Geranium and Buttercup ink, for leaves use Leaf Green ink. Shape the flowers and leaves using their coordinating shaping molds. Use the Deluxe Flower Shaping stylus to add more dimension to blossoms. Take some Lemon Chiffon Prills and glue them in the centers of all flowers. Use dimensional adhesive and hot glue to attach sentiment, blossoms and leaves onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over paper, flowers and leaves.

Decorate card with a few small self-adhesive crystals.