Instructions:

Cut a piece of  Deluxe Flower Shaping Paper 12” x 6”, score at 6” along the long side and fold to create a base card of 6” x 6”.  Cut a piece of gold cardstock 6” x 6” and adhere to the front of the card.  Cut a piece of dark blue paper 5 7/8” x 5 7/8” and adhere to the front of the gold cardstock. Cut a piece of blue cardstock 5 5/8” x 5 5/8” and adhere to the front of the blue paper. Cut a piece of blue paper 5 1/2” x 5 1/2" and adhere to the front of the blue card. Die cut two dies out of blue cardstock using the No. 3 and No. 4 dies from the HCD2-7337 Teardrop Lattice Gateway Die set and adhere to the bottom of the card as shown.

Stamp the bucket image from the HCPC-3964 Rustic Sunflower Bucket Cling Stamp Set and the single sunflower images from the HCPC-3963 Rustic Sunflower Can & Freezer Cling Stamp Set ink Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Real Brush Markers and die cut with the coordinating dies. Cut the opening in the bucket with a sharp craft knife at the top and then insert the sunflowers so they appear to be in the bucket.  Add the bucket and sunflowers to the front of the card with foam circles.  Add foam circles behind a couple of sunflowers to add dimension.

Stamp the leaf images from the HCPC-3962 Rustic Sunflower Cling Stamp Set in Library Green ink on Deluxe Flower Shaping Paper. Colour with Leaf Green and Library Green inks and die cut with the coordinating die. Colour the back of the leaves with Leaf Green ink and shape using the coordinating mold. Add Crystal Clear glitter using clear gloss gel medium and adhere to the left of the bucket as shown.

Stamp the sunflower images from the HCPC-3962 Rustic Sunflower Cling Stamp Set in Tiger Lily ink on Deluxe Flower Shaping Paper. Colour the petals with Buttercup ink and the centres with Tiger Lily ink and die cut with the coordinating dies. Colour the backs of the flowers with Buttercup ink and shape using the coordinating mold. Add Crystal Clear glitter to the petals with clear gloss gel medium and gold Gala Glitz to the centre of the flowers. Adhere the flowers over the leaves on the left of the card.

Stamp the ladybug images from the HCPC-3964 Rustic Sunflower Bucket Cling Stamp Set in Vermillion ink on Deluxe Flower Shaping Paper. Colour the spots with a fine black pen and the rest of the image with a red Copic pen and die cut with the coordinating die. Add 3D Crystal Lacquer to the body of the ladybugs and then when dry add to the card as shown with foam squares.

Stamp the sunflower seed images from the HCPC-3964 Rustic Sunflower Bucket Cling Stamp Set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Real Brush Markers and die cut with the coordinating die. Adhere seeds to the right of the bucket as shown.

Stamp the sentiment from the HCPC-3847 Celebrate Love Cling Stamp Set on blue pattern paper and die cut with the small tag die from the HCD1-7201 Ticket and Tags Die and adhere to the top right by the sunflowers as shown.

Other Products: Iris cardstock, foam squares, Creative Expressions Foundation Cardstock – Sky Blue, Copic marker – Lipstick Red R29, Fine Black Artline Pen, Altenew Obisdian Pigment Ink, clear gloss gel medium, Gold Gala Glitz, craft knife

Instructions:

Cut out the white base of the card and fold it to 8" x 5 1/2". From the paper collection, cut a 7 3/4” x 5 1/4" rectangle and adhere to the base. From the white paper, cut a 6” x 4" rectangle and glue. From the paper collection, cut a 5 3/4" x 3 3/4" rectangle and glue.

From white paper, cut the center section of the Elegant Swirl Gateway Die set and glue it as shown.

On Deluxe Flower Shaping Paper Pack of 50 - White, use black ink to stamp images from the Rustic Sunflower Bucket Cling Stamp Set and the Rustic Sunflower Can and Freezer Cling Stamp Set, cut out with coordinating dies, then color with watercolor markers. To the center of the sunflowers add glue and brown prills.

Stamp Sentiment with Ranger black ink on a strip of paper collection. Arrange everything as pictured. Finally, add sentiment. Cover with glue and glitter.

Other Products: Watercolor markers, Die cutting machine

Instructions:

Other Products: Smooth White Cardstock, Watercolor Paper, Versamark

Instructions:

The ready side-fold card measures 8 1/2" by 6 1/2". To prepare the card base, cut a smooth white cardstock measuring 8 1/2" by 6 1/2" and one-piece measuring 8 1/2" by 7". Score the second piece at 1/2" on 7" length to make the hinge. Crease well and adhere to the first piece on top of the hinge.

Choose the pattern paper from the designer paper collection and chop it to 7 3/4" x 5 3/4" using a deckled edge paper trimmer. Layer the panel first on white cardstock making a border of 1/16" on all sides and then on coordinating teal color cardstock making another 1/16" border on all sides. Layer the ready panel on the card front.

Cut a white frame using an outermost die from Eyelet Frame Gateway Die and the window die from Teardrop Lattice Gateway Die. Choose the coordinating paper and cut another frame using the 3rd die from the Eyelet Frame Gateway die and layer on top of the already ready frame. Use double-sided tape for extra dimensions.

Next, stamp the images from Rustic Sunflower Can & Freezer stamp set and Rustic Sunflower Cling Stamp Set using black archival ink and paint them using Zig Markers. Once done with all the coloring, cut the images using their coordinating die sets.

Stamp the butterfly image from Floral Butterfly Accents Cling Stamp Set with Versafine on Rajni Chawla's Vellum Flowerite and sprinkle gold heat embossing powder. Dust extras and heat set the image using heat tool. Cut the butterfly using it's coodinating die. Shape the butterfly with your hands.  

For Sunflowers, stamp multiple images of flower petals using Sunflower Archival ink and cut these using its coordinating dies. Paint the flower petals using Sunflower ink and Orange Tangelo Archival inks and shape them using a Deluxe flower shaping kit. Prepare 2 large and 4 medium-sized flowers. Prick the holes in the center and secure the pollens with the heat tool. Stamp one size smaller petal from the same set using Library green/ Cobalt Blue archival ink on green color cardstock and cut them using coordinating dies. Using the crushing technique, create calyx and complete the flower by securing them behind each flower for the complete flower look.

Stamp 3-4 sets of leaves using Leafy Accent stamp and Olive Green Archival ink and cut them using its coordinating die. Color the leaves using the same inks and shape them using the deluxe flower shaping kit and add glittered pearls using a glossy accent.

Stamp, color and cut few wisteria flowers using Leaf Green Archival ink and shape them using the flower shaping kit. Add flower pollens using a glossy accent and use these flowers as fillers.

Once, all the elements are ready, assemble the card as shown and complete the card by adding a sentiment from For My Friend Sentiments Cling Stamp Set on the tag from Album Tags and Accents Die.

Other Products: Smooth White Cardstock, Die Cutting Machine, Sharp Scissors, Scoreboard, Double-sided tape, Satin twine, Deckled Edge Paper Trimmer, Pearls, and Adhesive.

Instructions:

Make card base by taking the base die in the Decorative Circle Die set and laying it slightly over the edge of folded cardstock large enough to accommodate the die. Run through the die cut machine. Cut a piece of layering weight white cardstock using the same die only don't fold the cardstock. Glue this piece to the base card thus creating the finished look of the shape. I used a piece of sheet 10B of the paper collection to cut out another base piece and then glued it to the card base. Now we are ready to move forward with the rest of the card.

Using the decorative die of the set, cut out one using white cardstock and one using Luxe Gold Cardstock. Offset them just a bit so the gold shows just a bit behind the white piece and glue together. Use dimensional tape to secure this to the card base. Next, I created a round scalloped frame using gold cardstock, one of the round scalloped circles from the set and a circle die from the Eyelet Circles and Basics Small die set. I also cut out a piece of Sheet 10B using this same scalloped die. Glue the gold frame over the blue die cut being careful to match the scallops. Glue this frame piece to the card front.

Now we are going to work on the Sunflowers and leaves. Stamp the flower petals onto Deluxe Flower Shaping Paper using Memento Dandelion Ink. Also stamp a few using Fern Green ink. Color the petals using a mix of cantaloupe, Rhubarb Stalk and Sunflower Ink. The green ones were colored with Leaf Green ink and hilighted with Olive. The Sunflower leaves were stamped with Fern Green ink and colored with Leaf Green ink and hilighted with Olive ink. Use coordinating dies to cut out. Lay leaves and flower petals onto shaping mold, spritz with water and run through the die cut machine. Use the Flower Shaping Tools to add a bit more dimension by applying pressure to the centers of the petals. On the yellow flowers centers add a home made product that I mixed up just for Sunflowers. Allow to dry. Add glitter using a Hydra Sponge and Dries Clear Adhesive and allow to dry.

Stamp the sentiment from For My Friend Cling Stamp Set onto a piece of sheet 1B using Black ink. Cut out using the flag piece and cut off one end so it will fit on the card. Decide on placement and glue down. Decide where you want the flowers, leaves and the green sunflower buds and glue down.

Other Products: Die Cut Machine, Memento Dandelion Ink, Dimensional Tape, Homemade Product for Flower Centers, White Cardstock

Instructions:

Use the 6 x 6" Rounded Bi-Fold card for your base to create an easel card. Cut 3 round circles from the Rustic Sunflower Paper collection (9B, 4A, 4B) using the Largest Rounded Sunlight Window die and adhere to the card base using the Dries Clear adhesive.

Cut one of the Royal Elegance Frames out of white for the sentiment, stamp the sentiment on the oval cut out with the Plum ink using the Special Birthday Sentiment. Place foam dots on the back and add to the other Oval frame, add foam dots to the back of it and adhere to the bottom panel as shown.

Stamp flowers from the Rustic Sunflower Cling Stamp set on white card stock with Tangelo ink, color with Dandelion, cut out with the coordinating die, ink the edges with Cantaloupe ink. Place the flowers in the matching mold and run through the die cut machine to shape. Put 2 together making one flower.

Stamp the leaves from the Rustic Sunflower Cling Stamp set on white card stock with Cottage Ivy, color with the Bamboo ink, cut out with the coordingating die, ink the edges with more of the Bamboo Leaves and place in the matching mold. Run through the die cut machine to shape.

Stamp one of the Leafy Accent leaves on whtie with Cottage Ivy, color with the Bamboo Leaves, cut out with the coordinting die, ink the edges with more of the Bamboo Leaves and place in the matching mold. Run through the die cut machine to shape. Add all the leaves and flowers on the panels as shown.

Stamp 3 of the Lady Bugs from the Rustic Sunflower Bucket Cling stamp set on white with the Carnation Red ink, cut out with the coordinating die and adhere to the card using hot glue.

To finish the card add Power Outage Prills to the center of each flower and glitter to all the leaves and flowers.

Other Products: Die cut machine, Paper trimmer, Hot glue gun, Dandelion Ink

Instructions:

For the base use Gateway Fold Card – White. Cut panel to the shape using outside Lattice Swirl Gateway Die. Using the same die, cut from paper collection and place into card using Designer Dries Clear Adhesive. Cut using Lattice Swirl Gateway Die outside frame from paper collection and place using Adhesive Foam. Cut using decorative frame die from paper collection and adhere to the front of the shaped card using Adhesive Foam.

To create Sunflowers, stamp Rustic Sunflower Cling Stamp on white paper with Ranger Archival Ink Pad - Coffee and cut using the coordinating dies. You will need 2 petals of each to create flowers. For bigger flower use the biggest stamp, for smaller flower use smaller size stamp. Colour the flowers with Ranger Archival Ink Pad - Sunflower and center with Ranger Archival Ink Pad - Coffee using a sponge dauber. After coloring, place the flowers into the mold and run through cutting/embossing machine. Add a little hot glue to the underside of the flower. Add dries clear adhesive in the center and sprinkle brown Prills. Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

To create can, stamp Rustic Sunflower Can & Freezer Cling Stamp on white paper with Tim Holtz Disstress Oxide Ink Hickory Smoke and cut using the coordinating dies. Shade using Gallery soft oil pastels 246. Sponge the can with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

To create leaves, stamp Rustic Sunflower Cling Stamp on the white paper with Ranger Archival Ink Pad - Leaf Green, cut out with the coordinating die, shade use this same ink and shape in the mold. Sponge the leaves with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Cut piece from paper collection and stamp using Just for You Sentiments Cling Stamp with Ranger Archival Ink Pad - Jet Black and place onto the card using adhesive foam. Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine, Tim Holtz Distress Oxide Ink Hickory Smoke, Gallery Soft Oil pastels 246

Instructions:

Other Products: White cardstock, Distress Ink-Broken China, Pumice stone, Big-Shot Machine.

Instructions:

Make a square card base. Cut white card stock to size 6 “ by 12” and score at the 6” mark on the long side. Fold to make a top folding square card base. Cut a pattern paper 5 3/4'’ by 5 3/4" and adhere to the card base. Cut a square card panel from the pattern paper and remove the center part usng the Cut Mat Create square die. Adhere the card panel on the card front using foam tape.

Cut two pieces of Swirly accents die cut and trim them to form two corners and adhere on the top right corner and bottom left corner.

Stamp the sunflower image in all the sizes from the Rustic sunflower cling stamp on deluxe flower shaping paper using Sunflower archival ink. Using the sponge dauber, color the flowers and then cut using the matching die. Shape the flowers in the 3D flower shaping mold and shape them further in the deluxe flower shaping kit. Layer two big flower and one small flower. Add black prills in the center. Make many small and big flowers like this.

Make leaves by stamping the images from the Rustic Sunflower stamp set and the leafy accent stamp set using Library green ink. Color the leaves using a blend of Leaf green ink, library green ink and coffee. Cut the leaves using the matching die and shape them in respective 3D shaping molds.

Stamp the bucket and flower images in jet black ink on white card stock and color with zig markers. Cut with matching die. Add the bucket image on the card front. Arrange the flowers and leaves on the card front.

Stamp the sentiment in jet black ink on a strip of pattern paper. Mat this on a white strip of paper and add to finish the card.

Other Products: scoring board, die cutting machine, foam tape

Instructions:

The finished card measure 5 x 7 inches. Cut one piece deluxe flower shaping paper 10 by 7 inches and score at 5 inches to make a side fold card. Cut 1 piece of designer paper 4 3/4 x 6 3/4 inches, ink the edge in sepia and glue it on the base.  Cut a piece of corrugated cardboard 4 1/4 x 5 3/4 inches and glue it on the card base.

Make 4 Rustic Sunflower Flowers of different sizes. Stamp with Bright Tangelo ink onto Deluxe flower shaping paper, color the center with the sunflower ink and shade the edge with the same color. You can also color the back of the flowers. Diecut with the coordinating die. Place facedown into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe flower shaping kit tools. Glue 2 layers together. In the center of the flowers put hot glue. Add Prills on the top of the glue and let it dry. Also make 5 leaves in leaf green with the same technique.

Add a 6 x 1 1/2 inch burlap fringe on the left of your card.  With the rounded window frame die and the circle basics large die cut a doilie in white paper and yellow paper. Glue them on each other and put it in the center of the card.

Glue your flowers and leaves at the left of your card. Add sewing thread and jute string through your bouquet. 

Cut a tag with Tickets and tags die. With the letters and numbers die, die the word “YOU” in white and yellow and glue them on each other before paste it on the ticket. Put 3D Crystal lacquer on it to make it shine. Add it to the right of your flowers with 3D foam.

Other Products: Water mister, hot glue gun, hot glue, scissors, cheesecloth, sewing thread, jute string Tim Holtz, corrugated cardboard, burlap fringe

Instructions:

Card size is 9 inches by 6 inches. Score and fold 12 by 9 inches Deluxe Flower Shaping Paper at 6 inches on the long side to create card base. Cut panel on white card measuring 5 7/8 by 8 7/8 inches adhere it on card base using dimensional tape. Trim pattern paper from Rustic Sunflower Paper Collection measuring 5 1/2 by 8 1/2 inches and adhere onto card base using clear glue.

Die cut 4 frames using 2 smallest dies from Regal Lattice Gateway Die on Deluxe paper and adhere 2 frames together for sturdiness using clear glue, apply clear glue on the front using hydra sponge and cover with Magic Glitter, die cut 2 frames using second die from Regal Lattice Gateway Die Set On Pattern Paper and adhere underneath the frames using clear glue. Set these both frames horizontally as shown using dimensional tape.

Die cut 2 frames from Intricate Swirl Frame die set, one on gold card and other on deluxe card, adhere together, cut half frame and arrange half frame on the card front using dimensional tape.

Die cut 2 frames using Ornate Oval Die, One on Deluxe Paper and one on pattern paper from Rustic Sunflower Paper Collection Adhere both together using clear glue, set on the card front using dimensional tape.

Stamp Rustic Sunflowers and images from Rustic Sunflower Can and Freezer and Rustic Sunflower Bucket stamp sets using Coffee Ink, leaves with Fern Green ink on Deluxe Paper, die cut images using coordinating dies. Color the flowers with Dandelion Ink, color the centers with Bright Tangelo Archival Ink using dauber. Shape the flowers in shaping mold and make few flowers using Deluxe Kit and hot glue gun. Add clear glue in the centers, add mini prills, apply clear glue onto the flowers with hydra sponge and cover with Nida Tanweer Magic Glitter Powder. Color the leaves with vivid ink and color the leave edges with Mowed Lawn Distress Ink. Shape leaves in shaping mold. color other images using zig markers and apply clear glue and cover with Magic Glitter.

Stamp the sentiment on pattern paper using fern green ink trim the tag and add as shown using dimensional tape.

Add all ready elements and flowers as pictured, embellish the card with rhinestones using Quickstik Craft Tool.

Other Products: Die Cutting Machine, White Cardstock, Dandelion Archival Ink Pad, Mowed Lawn, Rhinestones, Dimensional Tape, Nida Tanweer Magic Glitter Powder.

Instructions:

Card size: 4 1/2 x 6”. Start with a 6 x 6" Shutter Fold card and cut off the right side. Glue the 2 semi-circle halves together to form 1 semi-circle flap for the front of card. Cut a 4 1/2  6” piece of decorative paper for the inside trimming to leave a slight white border. Cut a decorative paper semi-circle to fit front flap. Cut 2 medium tags using the Ornamental Tags from decorative paper tags. Glue the inside piece and the front piece onto card.

From white cardstock die cut the Rounded Lattice Window frame 2 times (just 1 half of it or use both halves if desired, you need 2). Cut 2 of the corners from the Swirly Accents Spray die. Glue the front Lattice half to the card front but on the inside just glue the left side and about 2’ top and bottom of the semi-circle to make a pocket opening for the tags. Glue the corners to the top and bottom right side of card inside. Tuck the 2 tags in the pocket and add ribbon to the top of tags.

Stamp  milk can and sunflower bouquet using Tuxedo Black then color with Copic Markers and die cut. Pop up the extra lid then glue flower bouquet as if coming out of the can. Glue the can and flowers to the card front at the right edge of the flap.

Stamp Rustic Sunflowers using Peanut Brittle, sponge with Sunflower then die cut. Stamp the leaves with Fern Green, sponge with Leaf Green then die cut. Shape leaves and flowers in the Shaping Mold (see video). Glue 3 of the same size together to make each Sunflower then fill centers with Redland Elements. Glitter the flowers, brush a mix of lacquer and shimmer together onto leaves. Glue 1 flower inside right bottom then glue the other 2 on the left side of front flap.

Glitter the card and tags.

Other Products: White cardstock, ribbon, Copic Markers: C2, C3, C5, Y11, Y13, Y18, Y38, YG03, YG17, YG25, E33, Shimmer Additive

Instructions:

Score the front of a 6" x 3" white card base diagonally at every 1/8". Die cut a piece of kraft and white cardstock using the dies from Album Tags and Accents die. Adhere them together and adhere the resulting piece on the card front using double sided foam tape.

Stamp the image from Rustic Sunflower Can and Freezer cling stamp set on a piece of watercolor cardstock and color it using DOMS brush pens and Koi waterbrush. Die cut the colored image using the matching die from Rustic Sunflower Can and Freezer die. Die cut a piece of white cardstock using the same die and adhere it behind the colored piece. Adhere this piece on the card as shown to finish the card.

Other Products: DOMS brush pens, Brustro watercolor cardstock, Koi waterbrush and double sided foam tape.

Instructions:

Card size: 4 3/4 x 6 3/4". Start with a 7 x 11” piece of white cardstock folded to 5 1/2 x 7”, place the outer die of the Royal Elegance Frame Die on card so that the die hangs over the fold by about 1/4" then cut (see video). Cut another front with the same die. Using decorative paper cut 2 more panels with the outer die, 1 for the front and 1 for the inside. Glue all panels onto card.

Using the outer die and the decorative die together, die cut a Gold Luxe border for the front of card (save the Gold Luxe decorative die cut for another card). Glue the gold border to the front of card matching edges.

Use the decorative die alone to cut a green decorative paper die cut. Place foam under this layer to pop it up and adhere to card front. Use the next die in (oval shaped decorative die) to die cut a Gold Luxe and a piece of decorative paper. Glue these together off-setting slightly. Use foam to pop it up on top of rectangle popped up layer. Cut a Gold Luxe oval and a decorative paper oval and off-set them then glue onto decorative oval.

Stamp sentiment using black on decorative paper and die cut with the next oval smaller. Cut the decorative frame for this oval out of Gold Luxe. Pop the oval and frame up and adhere to the center.

Stamp Sunflowers with Peanut Brittle, sponge with Sunflower then die cut. Stamp leaves with Fern Green, sponge with Leaf green, die cut then shape flowers and leaves in the mold (see video).

Glue 3 flowers together for each sunflower, fill with Redland Elements, glitter flowers. Brush a mix of lacquer and shimmer together onto leaves. Arrange leaves and flowers on the left side of card around oval. Glitter the non-gold parts of the card front.

Other Products: White cardstock, shimmer additive

Instructions:

Use the 7 “ x 5 “ Gateway fold card base for this card. To decorate the card panels, using the Gateway Eyelet Frames die set and the white card stock die cut three eyelet gateway frames, the largest size for the card base matting. From the same die set, use the next to the outside die frame, cut three mattings  from the sheet 9B. Ink all the edges of the die cuts with the leaf green ink and the dauber. Adhere all the layers to the gateway card base using double sided tape and foam tape for the card front panel. Using the Decorative Circle Frame die set and the white card stock die cut two fancy frames. Ink the edges of the frames with the leaf green ink and a dauber inking tool. Adhere to the card base using  foam dots to the first and third panel in the card base. Using the sheet 9B and the eyelet circle from the decorative circle frame die set, die cut two circles. Die cut also two banners using the arrows and Banner die set. Use the middle sized arrow dies. Using also the leaf green Ink, ink all the edges.

Adhere the circles in place and the arrows to the card front circle.

To decorate the card front panel, use six leaves, three large and two small sunflowers. To make these sunflowers stamp using the Rustic 'Sunflower stamps and sepia ink, color the images using: Spectrum Aqua Blend color Pencils- Mango for the sunflowers and for the leaves, Parakeet, Spruce. Use the water coloring pen to blend the colors. Use the matching dies to die cut the shapes. To bring shape and emboss to the flowers and leaves, use the matching Rustic Sunflower shaping mold and use the deluxe flower shaping tools to bring further shaping needed. Next apply a little adhesive to the flower petal tips using the hydra sponge then dip them into the glitter. When dry adhere two petal layers together for each flower using the hot glue gun. Next step is, apply the clear drying adhesive to the flower centers then you can sprinkle the black sand over the adhesive. Tap away any excess sand then put aside to dry. Three sets of the berry twigs are used as fillers. Stamp the berry image with the sepia and color using the leaf green ink. Die cut ready for use.  Arrange and adhere all the leaves flowers and fillers to the card front circle using the hot glue gun or the clear drying Adhesive.

For the middle panel, two buckets, five sunflower seeds, two large sunflowers on stems and five small sunflowers on stems are used. For the five sunflower seeds, the ginger color is used. The colors used are: The seeds, handles and bucket: Ginger and Gravel. The flower sprays: Mango, Parakeet and persimmon. The flowers: Mango. The leaves: Spruce and  Parakeet. To prepare the flat sunflowers, apply the adhesive to the petal points then apply the glitter to the petals. When dry, apply adhesive and sand to the flower centers. Do this to all the stamped clusters and all the sunflowers with stems. Put aside to dry.

For the third and last panel, first stamp the sentiment with sepia ink in the center of the eyelet circle then adhere the rustic sunflower sprays to the top and bottom of the eyelet circle. Colors used are: spruce, parakeet and mango. Three sunflower seeds are adhered to the left of the foot of the card.

To prepare the sentiment words, die cut from the white card stock using the Letters and Numbers die set. The small letter size, x 5 each letter for the words BUCKETS OF LOVE  and x 5 for the letter S. From the large  letter size x6 each for the XXO. Die cut also one of each of the letters from the sheet 9B design paper used for the card matting. Stack and adhere all the letters ready to use. Adhere in place using the clear drying adhesive and the ruler to keep the letters in a straight line while adhering in place. When the adhesive is dry, apply the crystal glossy to each letter, to the sunflower seeds and to the details on the bucket.

Other Products: Inks: Spectrum Aqua Blend color Pencils- Mango, persimmon, Gravel, Ginger. Other: Double sided tape, Double sided foam tape, Hot Glue Gun, Black sand, Glitter, Ruler.

Instructions:

Card size is 6 x 6”. Using the 6 x 6” Round bi-fold card base, fold the middle circle in half. Cut three circles using the Rounded Sunlight Window Die from the Rustic Sunflower Paper Collection, Sheet 8B. Ink the edges using Memento Peanut Brittle ink and adhere one to the inside of the card and the other to the card front. Cut the third one in half and adhere to the middle, folded panel. Using the Rounded Lattice Die, cut two times from white cardstock. Using the outside Rounded Window Frame Die and the inside three dies from the Courtyard Elegance Die, cut from white cardstock. Sponge these diecuts using dries clear adhesive and cover with Rajni Chawla’s Crystal Clear glitter. When dry adhere to the card front and inside of the card using dries clear adhesive and foam strips. The center square diecut will work as the easel stop.

Stamp the Rustic Sunflowers on Deluxe Flower Shaping Paper using Memento Potter's Clay ink. Color using Memento Peanut Brittle and ColorBox Harvest inks. Diecut using the coordinating die, ink the edges using Memento Rhubarb Stalk and shape using the Rustic Sunflower Mold and finish shaping by pinching and twisting the tips. Spray with Sheer Shimmer Craft Spray - Sparkle and let dry. Adhere two flowers together using hot glue to create the smaller sunflowers and three flowers for the large flower. Add hot glue or dries clear adhesive to the flower centers and cover with brown Gala Glitz.

Stamp the Rustic Sunflower leaves on Deluxe Flower Shaping Paper using Archival Olive ink and color using Vivid Chartreuse and Olive inks. Diecut using the coordinating die, ink the edges using Olive ink and shape in the Rustic Sunflower Shaping Mold. Stamp the Sunflower stalks and leaves from the Rustic Sunflower Can & Freezer Cling Stamp Set in Olive ink, color using Vivid Chartreuse, diecut, trim off the stalks, edge using Olive ink and shape using the Deluxe Flower Shaping Kit. Spray with Sheer Shimmer Craft Spray - Sparkle and let dry. Create two floral clusters, one on the card front and one on the bottom of the inside of the card.

Stamp the ‘You’re an amazing friend’ sentiment on vellum using VersaMark, sprinkle with Ranger Cranberry embossing powder and heat set using the Heat It Tool. Diecut using the eyelet Ticket and Tags Die and adhere to the card front using hot glue.

Other Products: White Cardstock, ColorBox Ink Pad – Harvest, Gala Glitz – Brown, VersaMark, Hot Glue Gun, Dimensional Squares, Sheer Shimmer Craft Spray-Sparkle, Ranger Cranberry Embossing Powder

Instructions:

Create a 5 x 7" card base with white cardstock. Cut a 4.5 x 6.5" piece of chicken wire paper from the Rustic Sunflower Paper Collection, distress with Paradise Teal and adhere.

Cut the large shadow frame from the Regal Frames and Accents Die in teal designer paper from the Rustic Sunflower Paper Collection, distress with Paradise Teal, adhere to dimensional tape and adhere, cut the decorative frame from the same die set in white cardstock and adhere. Cut the medium center die in white paper, sponge with light blue ink and adhere to center.

Stamp the bucket and sunflowers with the Rustic Sunflower Bucket Cling Stamp Set in Jet Black, color with Copic markers and cut out with coordinating dies, sculpt with stylus and adhere with foam tape.

Stamp the sentiment from the Celebrate Love Sentiments Cling Stamp Set in Jet Black on white cardstock and cut out with small oval from the Regal Frames and Accents Die, distress the outer frame with Paradise Teal. Adhere as shown.

Stamp the Rustic Sunflower Cling Stamp Set in Peanut Brittle, cut out with coordinating dies and sponge with Buttercup, sculpt with the 3D Rustic Sunflower Shaping Mold and add prills and glitter.

Stamp the leaves from the Rustic Sunflower in Fern Green, sponge with same, cut out with coordinating dies and sculpt with 3D Rustic Sunflower Shaping Mold.

Adhere flowers and leaves as shown .

Other Products: White Cardstock, copic markers, Bristol Smooth cardstock

Instructions:

Spritz the stamping card with water and sprinkle with the shimmer shakers, spritz again with water if required to create a pale background. Allow to dry overnight.

Cut a 7” x 10” piece of white cardstock, score and fold at 5” to create a tent fold card base.

Die cut the largest and third size majestic swirl frames - using the shimmer shaker card and the 2nd size using white card. Adhere the largest 2 to the card base using dries clear glue and the smallest adhere to the card base using foam pads.

Stamp the largest sunflowers onto vellum using versamark, (either vellum is suitable), cover with white embossing powder, remove excess and heat to set. Die cut. Nip the sides of each petal together at the tip and layer all 4 sets of petals (offsetting each layer) using hot glue. Add a sparkly gem in the centre to coordinate with the paper.

Create an organza bow, hot glue into position top left of the card, and hot glue the flower to the centre of the bow.

Die cut the best wishes tag using white card. Snip away the circle and adhere the words to the bottom right of the card base. Add 3 white pearls to the centre panel.

Other Products: White stamping card, white card stock, Rich wine and dusky mink shimmer shakers – Cosmic shimmer, white flat backed pearls, organza ribbon and .5” sparkly gem– The Hobby House, versamark, foam pads

Instructions:

Use white cardstock to make a 4.5'' x 6.5'' base when folded. From Sweet Magnolia Paper Collection fuchsia sheet 11B, cut a 4.25'' x 6.25'' rectangle.

Use a watercolor background in yellow, fading into orange in places and a little brown. Trim to size approximately 3.25" x 5.5". Using glue, connect the individual layers.

Stamp the image from the HCD1-7365 Rustic Sunflower Can & Freezer Die set on a white cardstock. Use Jet Black ink. Cut with a matching die. Don't color. Glue in the central part.

Cut sheets 4A and 11B from the Rustic Sunflower Paper Collection using alphabet letters HCD2-7371 Letters & Numbers Die. Overlay the selected letters with a slight offset as shown with the lighter layer at the top. Make the sentiment and adhere it on the bottom.

Other Products: White 170g paper, trimmer, cutting machine, watercolor paints, brush

Instructions:

Cut a piece of white cardstock 5 11/16 x 11 3/8", score at 5 11/16 " and fold to get a square base. Cut a piece of patterned paper from the Home for the Holidays Paper Collection to 5 7/16 x 5 7/16", another one to 5 1/8 x 5 1/8" and 3 3/4" diameter circle, distress the edges. Cut out a white frame with the Decorative Circle Frame. Use dimensional adhesive and glue all of them as pictured.

Stamp the sentiment with Holiday Village Cling Stamp in Forget Me Not ink and cut it out. Cut out two pieces of the blue paper from the Home for the Holidays Paper Collection to 5 11/16 x 5 11/16" and 5 11/16 x 3 1/2", distress the edges and adhere them inside of the base to make a pocket. Cut out two tags from the Home for the Holidays Paper Collection and a little bigger pieces of the white paper, distress the edges, adhere them together. Cut out the sentiment with Letters & Numbers Die, adhere to the tags and add some glitter. Cut out from the white cardstock a snowflake with the Holiday Snowflake Frame Die, adhere it on the pocket. Put the tags into a pocket.

Stamp the image Home for the Holidays Cling Stamp Set in Tuxedo Black ink on the white cardstock, repeat twice to get the image of the car, the fence and deer. Color the images with markers, then cut out with coordinating dies. Add some glitter then use dimensional adhesive and adhere all elements to the base.

Stamp 4 blossoms from Large Festive Poinsettia Cling Stamp Set in Red Geranium ink onto Deluxe Flower Shaping paper, color them with Lady Bug ink, diecut with coordinating dies. Stamp 2 holly leaves from the Small Festive Poinsettia Cling Stamp Set in Leaf Green ink, color them, cut out with coordinating die. Shape all flowers, branches and berries using their coordinating shaping molds. Add some Stop Whining prills to the centers of flowers.

Stamp 3 flowers from Cottage Garden Hydrangea Cling Stamp in Buttercup ink onto Deluxe Flower Shaping paper, cut out with coordinating die and shape with Deluxe Flower Shaping tool and add some Lettuce Entertain You prills. Stamp 4 small branches from the Holly Berry Spray Cling Stamp Set in Leaf Green ink and cut out with coordinating dies.

Use dimensional adhesive and hot glue to attach all elements onto card as pictured. Add some self-adhesive pearls.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, promarkers, gauze, self-adhesive pearls

Instructions:

Cut a piece of white cardstock 5 11/16 x 8 1/4", score at 4 1/8 " and fold to get a rectangle base. Cut a piece of patterned paper from the Home for the Holidays Paper Collection to 5 1/4 x 3 15/16" and 3 15/16" diameter circle and distress the edges. Cut out a white doily with the Rounded Window Frame Die. Use dimensional adhesive and glue all of them as pictured. Cut out the sentiment with Letters & Numbers Die, adhere it to the circle and add some glitter.

Stamp the image with Holiday Village Cling Stamp Set in Tuxedo Black ink on the white cardstock, repeat twice to get the image of the church, people and trees. Color the images with markers, then cut out with coordinating dies. Add some glitter then use dimensional adhesive adhere all elements to the base.

Stamp 6 blossoms from Large Festive Poinsettia Cling Stamp Set in Red Geranium ink onto Deluxe Flower Shaping paper, color them with Lady Bug ink, diecut with coordinating dies. Stamp 6 holly leaves from the Small Festive Poinsettia Cling Stamp Set in Leaf Green ink, color them, cut out with coordinating die. Shape all flowers, branches and berries using their coordinating shaping molds. Add some Stop Whining prills to the centers of flowers. Stamp 6 flowers from Cottage Garden Hydrangea Cling Stamp in Buttercup ink onto Deluxe Flower Shaping paper, cut out with coordinating die, shape with Deluxe Flower Shaping tool and add some Lettuce Entertain You prills. Stamp 3 small branches from the Holly Berry Spray Cling Stamp Set in Leaf Green ink and cut out with coordinating dies.

Use dimensional adhesive and hot glue to attach all elements onto card as pictured. Add some self-adhesive pearls.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, promarkers, gauze, self-adhesive pearls

Instructions:

Remove 1 round from the 6 x 6” Bi-Fold Card and use the single to make the ornament on. Mat and layer Rounded Window Frame with Home for the Holidays 9B onto 12B edged with Seafarer and adhere inside the card. Stamp onto white cardstock and edge in Seafarer ‘Today’s Favourite Moments’ Today’s Quotes Cling Stamp Set and shadow with Luxe Gold cardstock, adhere on dots inside the card.

Die-cut in white cardstock the 2nd largest arrow from Arrows and Banner, lay in Scor-Pal landscape and score at 2 3/4” and fold. Adhere onto one side with Home for the Holidays 9B and corner punch the top. Thread gold twine within the folded arrow and adhere to the single 6 x 6” Bi-Fold card.

Cover the single card circle with Home for the Holidays 9B Rounded Sunlight Window and Rounded Window Frame 12B, edge in Seafarer. Wrap gold twine around the ornament top and secure with tape at the back then adhere to the 6 x 6” Bi-Fold card. Shadow white and Luxe Gold cardstock Rounded Window Frame and create aperture with Circle Basics Large Die, adhere behind the aperture the image from Home for the Holidays sheet 2A mount with dots.

Stamp in Jet Black onto white cardstock Home for the Holidays and colour with alcohol markers, die-cut with coordinating die and add gel pen for the tree lights and Dries White glue and glitter, shape and adhere with hot glue.

Stamp in versamark onto Deluxe Flower Shaping Paper Festive Poinsettia Small/Large and Holly Berry Spray and gold heat emboss. Colour with Paradise Teal and Seafarer. Lay face down in Small/Large 3D Festive Poinsettia Shaping Mold, spritz with water and run through the die-cutting machine. Cup the centres with Deluxe Flower Shaping Kit and adhere 2 petals together with hot glue thread Medium Assorted Bead Stamens through the centres.

Die-cut white cardstock snowflakes from Festive Snowglobe add Dries Clear and glitter. Use hot glue to adhere all die-cut elements, add Dries White and Glass Shards.

Die-cut tag from Home from the Holidays 12A and gold heat emboss Festive Winterscapes ‘Happy Holidays’, thread gold twine and bow and adhere on dot.

Other Products: Hot glue, scissors/trimmer, corner punch, gold twine, alcohol markers, gel pen, versamark

Instructions:

The final card size is 5 x 7". Using the Decorative Circle Frames Die, cut the largest from patterned paper. Cut the next from white cardstock. Using the Large Circle Die cut from pink patterned paper. Cut the smaller scalloped circle from white cardstock. Cut the smaller plain circle from the green patterned paper. Cut the smallest die from the Ornate Ovals Die from white cardstock. Stamp the Let's Celebrate sentiment onto this piece using brown ink (Staz On- Timber Brown).

Cut a custom white cardstock card base the same width as the largest layer of die cuts you have cut. The fold is in the middle of the die cut piece, creating an easle of sorts. I fussy cut the edge to match the large die cut edge. Adhere that largest die piece to the custom card base. Adhere the next 2 die cut layers to the card base also. Adhere the green polka dot circle to the larger scalloped circle, then adhere to the card base using foam tape.

Adhere the sentiment to the card using foam squares. Add gems to this die cut piece too.

Stamp and die cut 2 sets of the Sweet Magnolia Blooms onto Deluxe Flower Shaping Paper using grey ink (Archival- Shadow Grey). Stamp and die cut 2 of the Sweet Magnolia Buds branches onto white cardstock using brown ink (Staz On- Timber Brown). Add color to the large flowers using pink ink (Distress Oxide- Seedless Preserves) and daubers. Add the same color to the branches using pink ink and a waterbrush. Add color to the rest of the braches using Zig Clean Color Markers (Olive Green, Oatmeal) and a waterbrush. Shape the branches slightly using shaping tools and add to the card, around the die cut circle. 

Shape the flowers using the coordinating 3D shaping mold. Assemble the flowers and then add gold micro beads to the middle of each using a liquid adhesive. Let dry. Add the flowers to the top and bottom of the card.

Other Products: Cardstock- White, Distress Oxide Ink- Seedless Preserves, Archival Ink- Shadow Grey, Gems, Waterbrush, Microbeads- Gold, Scrapbook Adhesives by 3L (Crafty Foam Tape, Dual Tip Glue Pen, Adhesive Dots Medium, Adhesive Dots Micro, E-Z Runner Ultra, 3D Foam Squares)

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 10” x 7”, score at 5” along the long side and fold to create a base card of 5” x 7”. Cut a piece of gold cardstock 5” x 7” and adhere to the front of the card. Cut a piece of pink pattern paper 4 7/8” x 6 7/8” and adhere to the front of the gold card. Die cut 4 corners from the HCD1-7246 Fanci-fold Pocket & Accents Die set out of gold cardstock and adhere to the four corners. Die cut 4 large pocket dies from the HCD1-7246 Fancifold Pocket & Accents Die set – two in white cardstock and two in gold cardstock. Adhere the white dies over the gold dies offsetting them slightly. Adhere on the card front as shown with the decorative edges facing out.

To create the band, cut a piece of gold cardstock 1 3/8” x 5” and adhere to the centre of the decorative dies. Cut a piece of green pattern paper 1 1/4" x 5” and adhere over the gold card. Die cut an eyelet rectangle using the die from the HCD1-7201 Ticket & Tags Die set and adhere over the green paper and trim the ends. Stamp the sentiment from the HCPC-3848 Cheerful Note Cling Stamp set in Obsidian ink and die cut using the coordinating long rectangle die from the HCD1-7201 Ticket & Tags Die set.

To make the flowers, stamp the flower images from the HCPC-3773 Flowering Dogwood Cling Stamp set in Versacolor White ink on the vellum and heat emboss with white embossing powder. Colour the back of the flowers with Nuvo Pink Flambe embossing mousse and lightly colour the on the front with a light pink alcohol marker. Die cut with the coordinating dies. Spritz lightly on the back of the flowers and shape using a groove golf tool. When dry add Frosting Powder to the flowers with clear gloss gel medium and Lettuce Entertain You Prills to the centres of the flowers. Adhere the flowers around the sentiment to the left of the card as shown.

Stamp the leaf images from the HCPC-3773 Flowering Dogwood Cling Stamp set in Library Green ink on Deluxe Flower Shaping Paper. Colour with Leaf Green and Olive inks and die cut with the coordinating dies. Shape using the flower shaping tools and add Crystal Clear glitter using clear gloss gel medium. Trim and adhere around the flowers.

Other Products: Light pink alcohol marker, Altenew Obsidian Pigment ink, clear gloss gel medium.

Instructions:

Create a 5 x 7" card base with white cardstock. Cut a 4.75 x 6.75 "piece of striped piece of paper from the Sweet Magnolia Paper Collection, distress with Magenta Hue and adhere. Cut out the outer frame of the Palace Gateway Die in pink paper from the same paper collection, distress with Magenta Hue and adhere, cut out the gate with the same die in white cardstock and adhere.

Stamp the sentiment from the Small Classic Petunia Cling Stamp Set in Jet Black and cut out with the Arrows and Banner Die, distress with Magenta Hue.

Stamp two of the petunia vines from the Large Classic Petunia Cling Stamp Set in Jet Black, cut out with coordinating die, sponge with Magenta Hue and Cactus Green, add glitter.

Stamp the Large and Small Classic Petunia Cling Stamp Sets in Magenta Hue and sponge with same, cut out with coordinating dies and sculpt with stylus. Cut out stamens from set in yellow cardstock, adhere to flowers and add glitter.

Stamp the smallest flowers from the Small Classic Petunia Cling Stamp Set in Iris, sponge centers with Buttercup and the outer petals with Vibrant Violet, cut out with coordinating dies, sculpt with stylus, add bead stamens and glitter.

Stamp the leaves from the Small and Large Classic Petunia in Olive Green, sponge with Cactus Green cut out with coordinating dies and sculpt with stylus.

Adhere vines, leaves, flowers and sentiment as shown.

Other Products: White Cardstock, Stazon Cactus Green Ink Pad, yellow cardstock

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 12” x 7”, score at 6” along the long side and fold to create a base card of 6” x 7”. Cut a piece of gold cardstock 6” x 7” and adhere to the front of the card. Cut a piece of dark pink pattern paper 5 7/8” x 6 7/8” and adhere to the front. Cut a piece of gold cardstock 5 5/8” x 6 5/8” and adhere to the front.  Cut a piece of medium pink pattern paper 5 1/2" x 6 1/2" and adhere to the front of the gold card.

Cut the decorative gateway die out of gold cardstock using the HCD2-7349 Palace Gateway Die.  Trim the middle out leaving the sides as shown. Cut a piece of gold cardstock 5 3/4" x 3 1/2". Cut a piece of light green pattern paper 4 5/8” x 3 3/8” and adhere to the gold cardstock.  Adhere the top and bottom of the gold gate die to this panel and then adhere to the front of the card.

To create the band, cut a piece of gold cardstock 1 1/2" x 7”.  Cut a piece of light pink pattern paper 1 3/8” x 7” and adhere to the front of the gold band.  Cut a piece of vellum 1” x 8” and stamp the sentiment from the HCPC-3847 Celebrate Love Cling Stamp in Versamark ink and heat emboss with gold embossing powder. Adhere the vellum to the band and fold the ends over and adhere firmly on the back. Cut two narrow strips of gold cardstock 1/8” x 8” and adhere to the edges of the vellum and fold the ends over the side of the card and adhere on the back. Adhere to the front of the card as shown.

Stamp the flower images from the HCPC-3786 Large Classic Petunia Cling Stamp in Pink Posies ink on Deluxe Flower Shaping Paper. Colour the centres with Canteloupe ink and the petals with Pink Peony ink and die cut with the coordinating dies. Colour the backs of the flowers with Pink Peony ink and the edges with Pink Posies ink. Spritz with water and shape using Groove Golf Tools. When dry assemble using two of each size flower. Pierce the centres of the flowers and insert a single yellow Pastel Pollen stamen and some gold medium pearl stamens.  Fasten with glue and add Crystal Clear glitter with clear gloss gel medium. When try trim the wires and threads.

Stamp the leaf images from the HCPC-3786 Large Classic Petunia Cling Stamp in Pink Posies ink on Deluxe Flower Shaping Paper.  Colour the images with Leaf Green and Pink Posies ink and die cut with the coordinating dies.  Shape using the Groove Golf Toll and add Crystal Clear glitter using clear gloss gel medium.  Add two layers of leaves to the flowers and then adhere around the sentiment as shown.  Trim some extra leaves and add around the flowers.

Stamp the small petunia images from the HCPC-3786 Large Classic Petunia Cling Stamp in Leaf Green ink on Deluxe Flower Shaping Paper. Colour with Canteloupe and Buttercup inks and die cut with the coordinating dies. Colour with Buttercup ink on the backs and shape using the Deluxe Flower Shaping kit. Pierce the centres and insert a yellow bead stamen and fasten with Dries Clear glue. Add Crystal Clear Glitter with clear gloss gel medium.  Trim the wires and add around the larger flowers as shown.

Other Products: Clear gloss gel medium, paint brush

Instructions:

Other Products: Watermist, Hot glue gun, scissor,

Instructions:

Cut 2 sheets of Spring Garden Paper Collection 9 x 9” and adhere together with 1/2” overlap to give an overall size (17 1/2 x 9”). Use the cardboard backing from your paper collections and cut x2 5 1/2 x 7 3/8”, x2 3/4 x 7 3/8”, x1 2 3/4 x 7 3/8”. Adhere 3 1 x 8” off cuts together to create a guide. Lay down the cardboard pieces dry first to get an idea of centred position. Adhere 2 1/2” magnets on the underside of the first 5 1/2” piece of cardboard (left hand side of underneath). Glue down left to right cardboard (portrait) 5 1/2”, 3/4”, 5 1/2”, 3/4”, 2 3/4”. Use the guide to space each piece equally apart. Mitre the corners with scissors or a kraft knife close to the cardboard. Gently run a ball tool along the cardboard and crease the paper around each edge and adhere. Adhere 2 pieces of Spring Garden Paper Collection together to create the lining 16 x 7 1/4”, edge with Deep Purple. Lay 2 magnets on top of the existing paper covered magnets and add double sided adhesive onto the adjoining cardboard piece. Gently bring the flap over, ensure square and rub only on the magnets and carefully pull back, the adhesive should pick up the loose magnets in the correct position. Lay the lining piece over and with a bone folder rub the paper into the spine gaps. Adhere over the top of the magnets on the inside mat and layered scalloped Decorative Circles.

Adhere Spring Garden Paper panels to cover the external front/back 5 1/2 x 7 1/4”, magnet flap 2 3/4 x 7 1/4”, sides 5/8 x 7 1/4” edged in Deep Purple. Adhere 4 white cardstock Album Tags & Accents corners edged in Deep Purple.

Cut white cardstock 4 1/4 x 6 1/4” and 2 score lines on 3 sides at 3/8”. Cut away the corners where the score lines overlap leaving a tab (photos on my blog). While the box is flat cut purple Spring Garden Paper edged in Deep Purple to cover the sides and front 4 5/8” x 3 3/8”. Adhere the pocket sides/bottom together. Add adhesive to the exposed flaps on 3 sides and adhere inside (tip: position the first pocket when closed).

Sandwich 2 purple Eyelet Oval die-cuts to cover front and back white cardstock. Adhere half the purple oval onto the magnet flap. Mat and layer white cardstock Decorative Oval die-cut onto Spring Garden plain edge Eyelet Oval die-cut, edge all with Deep Purple and adhere onto the purple oval on dots. 

Stamp onto Deluxe Flower Shaping Paper in Magenta Hue Fragrant Hyacinth, die-cut and colour with French Ultramarine. Spritz and lay face up in the 3D Hyacinth Shaping Mold. Add Nuvo Dandelion to the centres. Adhere with hot glue onto a white cardstock small hyacinth stamped in Leaf Green.

Stamp onto Deluxe Flower Shaping Paper in Deep Purple Fragrant Hyacinth, die-cut and colour with Majestic Violet and Magenta Hue. Shape with Deluxe Flower Shaping Kit (lay face down on foam mat and curl into a ball with the tool, then flip over and press the ball into the centre to give the petals a curled under effect). Add Nuvo Dandelion to the centres. Adhere with hot glue onto a white cardstock large hyacinth stamped in Leaf Green. Colour the leaves with watered down Distress Ink Peeled Paint.

Die-cut a tag from the Spring Garden Paper Collection Ornamental Tags and stamp and edge in Majestic Violet ‘You are so thoughtful’ from the Just For You Cling Stamp Set.

Adhere hyacinth, tag and bow onto the oval with hot glue, add Dries Clear and glitter. Insert blank cards and envelopes.

Other Products: Hot glue, paper trimmer/scissors, blank card/envelopes, ribbon, double sided tape, distress ink peeled paint