Instructions:

Cut Deluxe Flower Shaping paper to 4 1/4 x 11" size, score and fold at 5 1/2" to create card base. Cut largest plain oval of the Eyelet Oval and Basics Small Die from center of card base. Cut the top right 6 x 6" panel from sheet 9A of the Hollyhock Garden Paper Collection to 4 1/16 x 5 6/16" size. Diecut a coordinating oval from the card panel. Sponge the edges of panel with Garden Patina ink and attach onto card base.

Stamp the three small hollyhocks from HCPC-31001 Hollyhock Fence Cling Stamp Set in a two tone of Magenta Hue and Mulberry ink for the blooms and Fern Green ink for the leaves onto Deluxe Flower Shaping cardstock. Stamp the fence 2x from the same stamp set in VersaColor White ink onto Deluxe Flower Shaping cardstock, sprinkle with Aged Ivory embossing powder and heat set. Stamp the smallest size of hollyhock petals from HCPC-3999 Hollyhock Petals & Leaves Cling Stamp Set in VersaColor White ink onto cream cardstock, sprinkle with Aged Ivory embossing powder and heat set. Clean the hollyhock petal stamp. Ink petal stamp again, this time in a combination of Magenta Hue and Mulberry ink onto the cream cardstock. Stamp the small hollyhock leaf in Fern Green ink onto Deluxe Flower Shaping cardstock. Die cut all the images with coordinating dies. Pair the eyelet oval and largest plain oval from Eyelet Oval and Basics Small Die, and diecut the oval 2x from Deluxe Flower Shaping cardstock. Ink the ‘For my Friend’ in Mulberry, stamp off on scrap paper, then stamp in Magenta Hue, stamp off and again and then stamp through oval opening to inside of card.

Sponge the outer edges of one of the ovals with white ink, sprinkle with Aged Ivory embossing powder and heat set. Ink the inside edges of oval with Pink Peony ink. Attach this oval on top of the other and then attach around oval opening of card. Adhere two of the fences on top of the other two to create a sturdier fence. Lightly sponge the white fence with Garden Patina ink. Attach the fence through the opening of oval as shown. Sponge inside of card base oval with Pink Peony ink. Sponge the hollyhock image blooms with Pink Peony ink. Sponge the leaves with Vivid Chartreuse ink and a touch of Fern Green. Sponge the small hollyhock leaf with the same.

You’ll need 2 burgundy and 2 small white hollyhock petals. Sponge all the petals with Pink Peony ink in a circular pattern from center to almost out to the edge. Repeat using the Mulberry and then lastly the Vibrant Fuchsia. Use the Hollyhock Shaping Mold to shape the petals and small leaf. Use the Deluxe Flower shaping stylus to finish shaping the petals, leaf and rest of hollyhock images. Add a light touch of Vivid Chartreuse and Sunflower to the pollen stamens. Use a wire cutter to cut off 1/4" sections of the pollen. Attach these onto the petals and attach with hot glue. Attach the hollyhocks in front of fence as shown with hot glue. Attach the hollyhock petals as shown. Cut the small hollyhock leaf in half and attach as shown.

To add some more sparkle, apply the Dries Clear glue onto a yellow sponge, dab over card and sprinkle with Crystal Clear as desired.

Other Products: Cream Cardstock, Wire Cutter, Dimensional Adhesive, Hot Glue, Hot Glue Gun, Funnel Tray, Scissors, Paper Trimmer, Diecutting Machine

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 12” x 6”, score at 6” along the long side and fold to create a base card of 6” x 6”. Die cut the outer eyelet edge square using the No. 1 die from the HCD1-7281 Stairway Garden Die out of Deluxe Flower Shaping Paper. Adhere to the front of the card. Cut  a 6” x 6” panel from the paper collection and trim to 5 3/4” x 5 3/4”. Die cut the decorative die using the Nos 2, 3, 4, 5, 6 dies from the HCD1-7281 Stairway Garden Die and the No. 2 die from the HCD1-7283 Courtyard Elegance Die. Adhere the decorative die over the previously cut pattern paper and adhere to the front of the card with foam tape. Inlay the small flowers with the off cuts of the dies.

Die cut the inside decorative panel out of Deluxe Flower Shaping Paper using the small square die and the lattice square die from the HCD1-7281 Stairway Garden Die. Die cut a square from light yellow paper and adhere the lattice die over the square yellow paper and then adhere to the front of the card as shown.

Stamp the gate and flower images from the HCPC-31001 Hollyhock Fence Cling Stamp Set in Black Onyx ink on Iris cardstock. Colour the images with Zig Clean Colour Clean Brush Markers and die cut with the coordinating dies. Add a long hollyhock and plain stem image to the right of the card. Add the gate to the right of the card with foam tape. 

Stamp the large flower stem image from the HCPC-31000 Hollyhock Stem & Blooms Cling Stamp Set in Black Onyx ink on Iris cardstock. Colour with Zig Clean Colour Real Brush Markers and die cut with the coordinating die.  Adhere to the left of the gate with foam tape. Add some hollyhock images to the right of the large flower and to the right side of the gate as shown. Add Go Man Gro Prills to the centres of the flowers. Add Crystal Clear glitter to the painted images using clear gloss gel medium and a paint brush.

Stamp the bird images from the HCPC-3956 Clematis Birdhouse & Trellis Cling Stamp set on Iris cardstock with Black Onyx ink. Colour the images with Zig Clean Colour Real Colour Brush Markers and die cut with the coordinating die. Adhere the birds on the gate as shown.  

Cut the sentiment from the paper collection and adhere to the front of the card as shown.  

To finish, add iridescent gems to the centres of the flowers on the background and the lattice in the centre of the card as shown.

Other Products: Iris Cardstock, Versafine Black Onyx Ink, Iridescent gems, foam tape, clear gloss gel medium

Instructions:

The finished card measures 6 x 6 inches. Cut a piece of deluxe flower shaping paper 12 x 6 inches and score at 6 inches to make a top fold card.  Cut with the larger die of the Simply center piece die to make an open card.

Cut different pieces of paper from Hollyhock Garden Collection with the same Simply center piece die as follows: 6 x 6 inches in pink paper #12B, 6 x6  inches in Deluxe flower shaping paper and trim 1/16 inch with scissors all around, 5 1/2 x 5 1/2 inches in pattern paper #9A ink the edge with French ultramarine ink.

Glue each color or pattern paper on a larger colored one. Glue it on your card base with glue and 3D foam if you want to give more dimension.

Stamp Hollyhock flowers onto white flower shaping paper with memento rose bud ink. Diecut with the coordinating die. Place face down into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe Flower Shaping kit tools. In the center of some of the flowers add stamens from Pollen stamen set and pastel bead medium kit.

Stamp in leaf green leaves from the hollyhock stem and bloom. Cut it with the coordinating die. Also stamp with sepia the fence of the hollyhock fence stamp and in leaf green the other kind of leaves. Color everything with the zig markers pen. Glue everything on your card as shown.

Stamp your sentiment from the Special birthday sentiments stamps kit in the middle of the card with Memento Rose bud ink.

Other Products: Die cutting machine Cut’n’boss, heat gun, water mister, hot glue gun, hot glue, scissors,

Instructions:

My finished card size is 3 1/2" x 6 1/2". Make card base and cover with a piece of Sheet 8B of the paper collectyion. Cut a piece of white cardstock 3" x 6" and cover with a piece of Sheet 12B.

Cut two of the French Gate Dies; one from White Cardstock and one from Gold. Glue together offsetting a bit so the gold shows through behind the white. Glue to the 3" x 6" piece of white cardstock then glue to the card front.

Stamp the flowers onto the Deluxe Flower Shaping Paper using New Sprout and cut out using coordinating dies. Color the center with New Sprout and the edges with Magenta Hue the the very edges with Vibrant Fuschia. I colored front and back of the petals. Lay onto the shaping mold, spritz with water and run through a die cut machine. Turn out on the desk and allow to dry. I also did a bit more shaping with the Deluxe Flower Shaping Kit at this point. Once the petals dry add the Prills to the center and allow to dry.

Stamp the greenery from the Hollyhock Fence and the Hollyhock Stems and Blooms using Leaf Green then color using Leaf Green and brush the edges with Olive to add a bit of depth. I used hot glue to add the flowers to the greenery then I hot glued to the card front. The card is finished.

Other Products: Die Cut Machine, Hot Glue Gun, White Cardstock,

Instructions:

Card size: 5 x 6 7/8”. Make a shaped card (see video) using the outer die of the Fancy Classic Rectangle Frame die set. Cut a decorative paper piece using the same die. Glue the decorative paper to card base matching edges. Cut the decorative die from gold then glue it to the card front.

Stamp several small hollyhock stems and blooms, the hollyhock fence x2, the Clematis Birdhouse and 2 birds using black on white cardstock, die cut all then color. Slightly shape leaves from the back and place pop dots on the backs of leaves. Shape the bird bodies and place pop dots under their bellies.

Stamp the sentiment using black onto white then use the banner to die cut, shorten to size. Cut another banner from gold, glue them together off set.

Glue the fence pieces onto card front at the bottom, overlap if needed to shorten also glue the birdhouse down on right side under fence but leave left side of birdhouse free from glue for now. Adhere the blooms, various sizes and shapes. Adhere the 2 little birds as desired.

Tuck the sentiment in under left side of birdhouse then glue birdhouse all the way down.

Glitter flowers.

Other Products: White cardstock, Copics: YG03, YG23, RV10, RV02, RV55, R20, R21, R22, Y11, Y15, B21, B24, V01, V12, V15, E50, E53, E33, E35

Instructions:

Score a 11" x 4 1/4" piece of Deluxe Flower Shaping paper at 5 1/2" and fold to make a 4 1/4" x 5 1/2" top folding card base. Spritz the front of the cardbase generously with water on both sides and emboss it using Altenew Herringbone Tiles 3D Embossing folder. Let it dry under something heavy like a big acrylic block. 

Ink a piece of white cardstock using Mowed Lawn and Salty Ocean Distress inks using large oval makeup brush. Die cut this piece using the die from Filigree Companion Frame die. Die cut a piece of white cardstock using the die from the same set and adhere it on the previous die cut. Adhere this piece on the cardfront using foam tape.

Stamp the images from Hollyhock Fence Cling stamp set on a piece of watercolor cardstock and die cut them using the matching dies from Hollyhock Fence die. Color them using Zig clean color real brush pens. Arrange and adhere them on the card as shown using Foam tape. Add a few pearls to finish the card.

Other Products: Altenew Herringbone Tiles 3D Embossing folder, Foam tape, Brustro green gold brushes, Brustro Watercolor cardstock, Mowed Lawn, Salty Ocean and Gatherd Twigs Distress inks, large oval makeup brush and Pearls.

Instructions:

Cut out the white base of the card and fold it to 5 1/2" x 5 1/2". Cut a slightly smaller rectangle from the paper collection and glue to the base. Cut a 5 1/4 " x 5 1/4" rectangle from the silver paper, then cut a slightly smaller rectangle from the white paper. Then, with green ink, stamp the sentiment from the Cheerful Note Sentiments set in the middle right and adhere with Double Dots 100 pc. -3D Foam Circles.

Stamp Hollyhocks from the Hollyhock Fence set with black ink, highlight the leaf nerves with a dark green watercolor pencil then color them with Memento New Sprout ink. Cut with coordinating die. Color the flowers with a pink and yellow watercolor pencil. Diecut the silver paper using the same dies and glue them so that they stick out a little from the bottom.

Glue everything as shown.

Other Products: Watercolor pencil, cutting machine

Instructions:

Make a square card base with Deluxe flower shaping paper. Cut Cardstock to size 12" x 6" and score at 6" on the long side. Fold to make a top folding card base.

Cut luxe gold card stock 5 3/4" x 5 3/4" and add as mat layer on the card front. Cut pattern paper from paper collection to size 5 1/2" x 5 1/2" and adhere to the card front, cut a country cottage image from the paper collection to size 4" x 4" and add a mat gold layer from Luxe gold card stock. Add this piece on the card front.

Cut a french gate die cut in white and gold card stock. Trim a part of the die cut to get a corner design. Adhere the white die cut on the gold die cut and adhere the pieces on the top right corner.

Stamp the images from Hollyhocks Stem and Blooms stamp with Jet black ink on Deluxe flower Shaping paper. Colour the stem with Zig real brush pens. Add colours to the Bloom stem with Zig markers. Cut with coordinating die.

Stamp the flowers from Hollyhocks Petals and Blooms stamp set with Seedless Preserve distress oxide ink on vellum. Add clear embossing powder and heat set. Add the same colour to the back of the flower. Spary once with water and shape in the 3D flower shaping mold. Stamp the leaves with English Ivy ink. Color the leaves with leaf green ink . Add prills in the flowers.

Stamp and colour the fence and cut with coordinating die.

Arrange the blooms and stems on the card. Arrange the flowers and leaves . 

Finish the card by adding the sentiment.

Other Products: Die cutting machine, scoring board, water spray, seedless preserve distress oxide ink, hot glue gun with sticks, Vellum paper 180 gsm

Instructions:

Card size 5” x 7”. Take pattern paper from HCDP1-2143 Hollyhock Garden Paper Collection, tear edges, adhere it on card base using designer dries clear adhesive.

Cut one die base on pattern paper using die HCD2-7349 Palace Gateway Die, adhere it using foam tape, cut one intricate die on white cardstock, adhere it on pattern paper using foam tape.

Stamp one fence image on white cardstock using versamark ink, sprinkle embossing powder-enchanted gold and cut it with coordinating HCD1-7419 Hollyhock Fence Die. Adhere it using designer dries clear adhesive and foam tape.

Create hollyhock flowers using HCPC-3999 Hollyhock Petals & Leaves Cling Stamp on white cardstock using archival ink-vibrant fuchsia for flower petals and english ivy for leaves and small flower petals, cut them using coordinating HCD1-7417 Hollyhock Petals & Leaves Die. Color them using archival ink-vivid chartreuse, leaf green, coastal coral, vibrant fuchsia, mulberry,  shape them using HCFB1-5012 3D Hollyhock Shaping Mold, giving a touch of Encore Ultimate Metallic Ink Pad-Gold for leaves. Add stamens and prills and randomly add crystal clear glitter on edges of flowers.

Stamp some stems from HCPC-31000 Hollyhock Stem & Blooms Cling Stamp on white cardstock using archival ink- English ivy, cut them using coordinating die HCD1-7418 Hollyhock Stem & Blooms Die, color them using archival ink-leaf green, english ivy. From same stamp set make base for hollyhock flowers using archival ink- english ivy, cut them with coordinating die and color them using archival ink-leaf green.

Stamp one stem image from HCPC-31001 Hollyhock Fence Cling Stamp on white cardstock using archival ink-english ivy, cut them with coordinating die HCD1-7419 Hollyhock Fence Die, color them using archival ink-sunflower and leaf green, add randomly add crystal clear glitter. Arrange all flowers, leaves, stems as pictured.

Cut one small oval die from HCD2-7309 Eleborate Oval frames Die Die on white cardstock, add sentiment from HCPC-3847 Celebrate Love Sentiments Cling Stamp using archival ink-vibrant fuchsia, adhere it using foam tape.

Other Products: Big Shot Plus Machine. Embossing Powder-Enchanted gold.

Instructions:

Layout is 12 x 12". Take a 3 3/4” x 5 3/4" photo and mat onto a 6” x 4” piece of light green paper, sheet 7B, from the Hollyhock Garden Collection Paper Pad. Cut a piece of dark green paper, sheet 8B, from the Hollyhock Garden Paper Pad, to 6 1/2” x 4 1/2", adhere to center of the yellow paper, sheet 11B, 12" x 12" page.

Stamp two Fences from the Hollyhock Fence Stamp Set, in Ranger Archival Potting Soil ink, onto Flower Shaping Paper. Color with Ranger Distress ink, Tea Dye, using the Daubers. Die cut with the matching die. Lightly shape with the stylus from the Deluxe Flower Shaping Kit. Put to one side.

Stamp three small Hollyhock Stems, from the Hollyhock Fence Stamp Set, in Ranger Archival Leaf Green ink, three times.  Color with Ranger Archival Vivid Chartreuse and Vibrant Fuchsia, using the Daubers. Die cut with the matching dies. Lightly spritz with water and shape with the stylus from the Deluxe Flower Shaping Kit.

Stamp four Hollyhock Stems from the Hollyhock Stems & Blooms Stamp Set, two of each, in Leaf Green ink. Color with Ranger Archival Vivid Chartreuse ink and Vibrant Fuschia ink using the Daubers. Die cut with the matching dies. Lightly spritz with water and shape with the stylus from the Deluxe Flower Shaping Kit.

Stamp nine small Hollyhocks from the Hollyhock Petals & Leaves Stamp Set, in Ranger Archival Vibrant Fuchsia. Color in with Vibrant Fuschia ink using the Daubers. Die cut with the matching dies. Stamp eight medium Hollyhocks in the same way. Pierce a hole in the middle of each one. Color in with a touch of Ranger Archival Sunflower ink in the centers then add Vibrant Fuschia using the Daubers. Add Nuvo Drops in Rhubarb Crumble to the small flower centers. Thread Medium Bead Stamens in pink through the medium petals. Add two layers of petals at a time, offset and glue the petals as you go.

Stamp seven small leaves from the same Stamp Set in Leaf Green ink, color in with Vivid Chartreuse ink, add a little Vibrant Fuchsia ink to the edges, using the Daubers. Die cut with the matching die. Place petals and leaves in the Hollyhock Shaping Mold, lightly spritz with water and run through a die cutting machine. Tap out and lightly shape with the stylus from the Deluxe Flower Shaping Kit.

Stamp three Dragonflies from the Decorative Dragonfly Collection, in Leaf Green ink, die cut with the matching dies. Color with Vibrant Fuchsia and Vivid Chartreuse inks. Make two sets of each and glue one on top of the other, along the bodies only, making sure to leave the wings free.

Cut a border from sheet 3B, from the Paper Collection. Adhere 1 1/2"from the base of the page. Adhere the matted photo to the center of the page, an inch from the top of the border. Adhere the Large Hollyhock Stems and smaller Hollyhock stems to either side of the photo as per the layout. Adhere a few leaves cut from a large Hollyhock stem, beneath the photo, where the Fences will be placed. Cut off two end posts from the Fences so that you only have posts on either end of the Fence. Adhere the Fences together. Adhere the Fence below the photo, leaving them to gape a little. Adhere a small Hollyhock stem to the join of the Fence and add two small leaves and a small Hollyhock flower.

Adhere small green leaves to either ends of the page. Adhere the small Hollyhocks around the page. Adhere the Dragonflies and medium Hollyhocks to the page. Stamp a sentiment from the Todays Quotes Sentiment Stamp Set, in Ranger Archival Olive Green Ink. Die cut with the 1.75” x 3.25” oval from the Eyelet Ovals & Basics Large Stamp Set. Adhere with foam tape to the side of the page. Using Dries Clear Glue and a small sponge, sponge glue over the Hollyhocks, leaves, Dragonflies and Hollyhock stems. Apply Clear Glitter.

Other Products: Distress ink pad - Tea Dye, Ranger Archival ink pad - Potting Soil, Hot glue gun, Piercing Tool, Clear Glitter, Foam tape

Instructions:

Create 6 x 6” card base  from white card stock and cut a pieces of the Collection Paper 1/4 inch smaller. Glue it to the base. Cut retcangule piece from paper collection and using foam strips, attach to the front of card.

To create Hollyhock flowers, stamp Hollyhock Petals & Leaves Cling Stamp Set on white paper with Ranger Archival Ink Pad - Magenta Hue and cut using the coordinating dies. You will need 2 petals of each to create flowers for bigger flower use the biggest stamp, for smaller flower use smaller size stamp. Colour the flower with Ranger Ranger Archival Ink Pad - Magenta Hue and Ranger Archival Ink Pad - Sunflower using a sponge dauber. After colouring, place the flowers into the mold and run through cutting/embossing machine. Pierce the center and glue in some stamens using hot glue gun. Add a little hot glue to the underside of the flower. Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter. Asemble flowers as shown.

Stamp the stamp Hollyhock Petals & Leaves Cling Stamp Set and Hollyhock Stem & Blooms Cling Stamp Set on the white paper with Ranger Archival Ink Pad - Leaf Green, cut out with the coordinating die, shade using this same ink and shape using mold. Sponge the leaves with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Cut sentiment from paper collection and place onto the card using adhesive foam strips. 

Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine,

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 6 1/2” x 6 1/4”, score at 3 1/4” along the 6 1/2” side and fold to create a 3 1/4” x 6 1/4” card. Die cut the window using the No. 4 Left Insert Die from the HCD1-7397 French Gate Die on the card front. Cut a piece of clear cardstock 3” x 6” and adhere to the inside left of the card. Die cut two decorative gate dies out of Deluxe Flower Shaping Paper using the No. 3 Decorative Gate die and the No. 5 Decorative Gate Dies. Cut two frames out of green pattern paper from a 3” x 6 1/16” paper using the No. 1 Outline die from the HCD1-7397 French Gate Die. Adhere the green frame on the front and inside left of the card.  Adhere the the two decorative dies over the decorative insert.

Stamp the long stem images from the HCPC-31000 Hollyhock Stem & Blooms Cling Stamp Set in English Ivy ink on Deluxe Flower Shaping Paper. Colour with Leaf Green ink and die cut with the coordinating die. Shape the leaves and adhere to the front of the card as shown.

Stamp the leaf images from the HCPC-3999 Hollyhock Petals & Leaves Cling Stamp Set in English Ivy ink on Deluxe Flower Shaping Paper. Colour with Leaf Green ink and die cut with the coordinating dies. Colour the backs with Leaf Green ink and shape using the coordinating mold.  Add Crystal Clear glitter using clear gloss gel medium and adhere around the long stems.

Stamp the flower images from the HCPC-3999 Hollyhock Petals & Leaves Cling Stamp Set in Lady Bug and Magenta Hue inks. Colour the centres with Citrus Burst ink and die cut with the coordinating dies. Colour the edges and backs of the Lady Bug  flowers with Lady Bug ink and the Magenta Hue flowers with Cotton Candy ink. Shape using the coordinating mold. Pierce the centres of the flowers and insert yellow rock candy stamens and magenta pearl stamens and fasten with Dries Clear glue. When dry trim the threads, add Crystal Clear glitter using clear gloss gel medium and adhere over the leaves.

Cut sentiment from paper collection and adhere over the leaves. 

Inside Back of card: Cut a piece of pattern paper 3 1/8” x 6 and adhere to the inside back of the card.

Other Products: Altenew inks - Cotton Candy, Citrus Burst, clear gloss gel medium, paint brush

Instructions:

Card size is 5 1/2 x 4 1/4”. Score and fold 11 x 4 1/4” white cardstock at 5 1/2” on the long side to create tent fold card base. Cut white cardstock 5 3/8” x 4 1/8” and sheet 4A from the Hollyhock Garden Paper Collection to 5 1/4 x 4”. Ink the edges of the designer paper with Vibrant Fuchsia Archival ink, adhere it to the white cardstock using dries clear adhesive and then adhere to card base using foam tape. Cut sheet 9A to 5 3/8 x 4 1/8”, edge with Vibrant Fuchsia ink, stamp ‘You are in our thoughts & prayers’ from Cheerful Note Sentiments with the same ink and adhere to the inside of the card.

Stamp the fence from the Hollyhock Fence Cling Stamp set on white cardstock using VersaMark, cover with WOW Sparkling Snow Embossing Glitter and heat set using the Heat It Tool. Stamp the stems from the same set on white cardstock using Memento Tuxedo Black ink, color using Stampin’ Blend markers Light Granny Apple Green and Light Lovely Lipstick, diecut with the coordinating dies and lightly shape using the Deluxe Flower Shaping Kit. Add a dot of glue in the flower centers and sprinkle with You Had Me at Yellow prills. Sponge with dries clear adhesive and sprinkle with Rajni Chawla’s crystal clear glitter. Stamp the little bird from the Clematis Birdhouse & Trellis Cling Stamp set in white cardstock using Tuxedo Black ink, color using Stampin’ Blend markers – Light Seaside Spray, 1000 and Light So Saffron, diecut using the coordinating die and lightly shape using the stylus. Stamp the sentiment ‘feel better soon’ on white cardstock using Vibrant Fuchsia ink, diecut using the eyelet die from the ticket and Tags Die set. Diecut a decorative hinge from white cardstock using the Window Hinges Die and cut in half.

Adhere the fence to the bottom center of the card front using adhesive strips. Adhere the hollyhock and stem images to both sides of the fence using dries clear adhesive and dimensional dots. Adhere the little bird to the to center of the fence using dries clear adhesive and dimensional dots. Adhere the sentiment at the top center of the card front using dimensional tape and adhere the window hinge pieces to the top corners using dries clear adhesive.

To add some sparkle, randomly dab all the elements and the card front and inside with dries clear adhesive and sprinkle with Crystal Ultrafine Transparent Glitter.

Other Products: White Cardstock, Dimensional Dots, Dimensional Tape, Funnel Tray, Diecut Machine, Paper Trimmer, Misti, Stampin’ Blend Markers – Light Lovely Lipstick, Light Granny Apple Green, Light Seaside Spray, 1000 and Light So Saffron,

Instructions:

Cut a piece of 6 x 12” cardstock from the HCPP1-475 Deluxe Flower Shaping Paper and score in half to create a 6 x 6” card base. Next cut a piece of 6” x 6” pink paper from sheet 12B of the HCDP1-2143 Hollyhock Garden Paper Collection and glue to the card front. From sheet 11A cut a piece of green and pink patterned paper to 5 3/4 x 5 3/4” and glue to the card front. Next using the largest die from the HCD1-7370 Simply Elegant Centerpiece Die, cut a piece of the same pink paper from sheet 12B, then using the large decorative die from that set cut 1x using white cardstock and 1x using HCGP1-493 Lux Silver Cardstock. Glue these together, slightly offsetting the silver behind the white, and glue to the pink background die. Glue the piece just created to the card front. Using the small two center dies from this same die set cut the background die from Sheet 11B (yellow), and then the center decorative die 1x from white card and 1x from Luxe Silver Cardstock layering them just like the larger medallion die. Attach this center medallion to the center of the card front with 3D foam tape, popping it up for added dimension.

Using the HCPC-3999 Hollyhock Petals and Leaves Cling Stamp Set, Stamp the large hollyhock flowers 4x and the medium hollyhock flowers 3x in Versacolor White Pigment Ink onto Rajni Chawla’s Vellum. Make sure to use an antistatic tool before stamping. Once stamped, sprinkle with white embossing powder and heat emboss. Also from this same stamp set stamp the leaves 4x in Leaf Green Archival ink onto white cardstock. Also using Leaf Green, stamp the large leafy stem 1x onto white cardstock using the HCPC-31000 Hollyhock Stems and Blooms Cling Stamp Set. Next Stamp the yellow flowers by stamping the calyx stamp from the HCPC-3980 Sweet Pea Cling Stamp Set in Chrome Yellow Archival ink. Lastly from the HCPC-3966 Autumn Wreath Accents Cling Stamp Set stamp the small leaf 4x in Olive Archival ink. Cut all stamped images with their coordinating dies.

Using HCDA2-450 Stack and Store Daubers color flowers and leaves in the following ways. For the Hollyhocks use a mixture of pink Distress Oxide inks onto the front sides of your images. Top Tip: Wipe any excess ink off the vellum with a damp cloth after the ink has had a chance to sit for a few minutes. This will allow for the white heat embossing to be more brilliant. Once colored hand shape with Grooved Golf tools and glue together 3 layers then add both HCS1-460 Bridal Bouquet Stamens and HCS1-459-1 Rock Candy Stamens to the centers with a glue gun. For added sparkle dab on some Dries Clear glue using a Hydra Sponge and sprinkle with Crystal Ultrafine Transparent Glitter. Next color the yellow flowers with Sunflower Archival ink and shape through the HCFB1-5010 3D Sweet Pea Shaping Mold before adding the HCS1-457-1 Pastel Pearl Small Stamens in the centers of each flower. For the Hollyhock leaves color with Vivid Chartreuse Archival inks and for the Autumn Wreath leaves color with both Olive and Leaf Green Archival Inks. Both styles of leaves can be shaped easily using the HCST1-401 Deluxe Flower Shaping Kit stylus and shaping mat by giving a little extra dimension from the back.

From sheet 3A of the Hollyhock Garden Paper Collection choose a sentiment strip to add to the card front. Cut a flag out of one end and attach to the card as shown. To finish the card arrange the flowers in a circular design using the die as a guide. When adding the leaves rip off leaves as needed from the leafy stem for the larger flowers. Glue flowers and leaves with a glue gun. Add a coordinating center gem to finalize the project. Decorate inside of card as desired.

Other Products: Ranger Archival Ink - Chrome Yellow, Ranger Distress Oxide Inks - Kitsch Flamingo, and Picked Raspberry, Pink and Silver Embellishment, 3D Foam Tape, Glue Sticks, Glue Gun, Paper Trimmer, Scissors, Die Cut Machine

Instructions:

Cut a piece of white cardstock to 8 1/4 x 11", score at 5.5" and fold to get a base. Cut a piece of paper from the Hollyhock Garden Paper Collection to 5 3/16 x 7 14/16", another one to 4 3/4 x 5 14/16" and a little bigger piece of the white cardstock. Cut out a white and a silver frame with the die No. 4 from the Fancy Classic Rectangle Frame Die Set, adhere them together, cut out in half. Stamp the sentiment from the Celebrate Love Sentiments Stamp Set in Vibrant Fuchsia ink, cut it out with the tag from the Album Tags and Accents Die set. Adhere all elements to the base as pictured.

Stamp two hollyhocks from the Hollyhock Stem & Blooms Cling Stamp Set in Tuxedo black ink, stamp 3 small hollyhock stems from the Hollyhock Fence Cling Stamp Set in Tuxedo black ink and the fence from the same set in Toffee crunch ink. Color them with colored pencils and cut out with coordinating dies. Adhere all elements together and to the base.

Stamp blossoms from the Hollyhock Petals & Leaves Cling Stamp Set in Vibrant Fuchsia and Sunflower inks, color their centers with the same ink, diecut with coordinating dies and shape with mold. Add Pastel Pollen Stamens Medium and some Minnie Pearls prills to all big flowers and just prills to small flowers. Stamp 9 hollyhock leaves from the Hollyhock Petals & Leaves Cling Stamp Set in Fern Green ink, color them with the Leaf Green ink, cut out with coordinating die and shape with mold. Stamp 3 bees in Tuxedo Black ink from the Summer Wreath Accents Cling Stamp Set, color them and cut out with coordinating die. Use dimensional adhesive and hot glue to attach all elements onto card as pictured. To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers and bees.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, sisal, colored pencils

Instructions:

Ready side fold card measures 5.5" × 7.5". Cut a mat from designer paper collection measuring 5.25 × 7.25", distress edges with matching ink and adhere it on ready card base. Cut another mat from designer paper collection measuring 4.75" × 6.7.5" and cut a rectangle window using die from French Gate die set. Take white cardstock measuring 5" × 7", cut a window also in it. Cut a decorative piece from white cardstock using die from French Gate die set. Glue all pieces and create second mat. Adhere it on card using dimensional tape.  

Stamp fence image on white cardstock which coffee ink and cut with coordinating die. Paint with distress ink. Stamp flowers using Buttercup ink and leaves using leaf green ink on deluxe flower shaping paper. Cut with coordinating dies, paint flowers with buttercup and tiger lily ink and leaves using leaf green ink. Shape flowers and leaves using shaping mold. Pierce the center of Flowers add stamen. Stamp Hollyhocks floral stem on deluxe flower shaping paper using leaf green ink and cut with coordinating die. Paint using same ink. 

Arrange all elements on card and glue them using hot glue as pictured. Stamp Butterflies on vellum paper using versamark and heat emboss using white embossing powder. Cut with coordinating die. Glue them on card using foam dot. Cut sentiment strip from designer paper and glue it on white cardstock strip. Glue it on card using dimensional tape.

For finished look, apply Crystal Clear on flowers and leaves using Art Glitter Dries Clear adhesive. 

Other Products: Smooth White Cardstock, Versamark

Instructions:

Score and fold a 12” x 5.25” piece of white card at 6” to create a tent fold card, place the largest Lattice Swirl gateway die over the fold and die cut to create a shaped card base. Use the largest Lattice Swirl gateway die to cut paper from collection and layer onto a white die cut of the same shape. Adhere this to the card base. Die cut a white and pale green decorative Lattice Swirl gateway die and adhere them on top of each other, slightly offsetting, onto the card base.

Make the flowers: Stamp 2 large, 2 medium and 3 small floral stamps using bumble bee ink onto flower shaping paper, color the center using lilac posies ink and the remainder lightly with pale papaya ink, die cut. Place face up into the shaping mold, spritz with water and run through the die cutting machine to shape. Layer 2 sets of petals together, offsetting, to create each flower. Place a drop of hot glue into the center of each flower and cover with a penny saved prills, remove excess when cool.

Stamp the leaves and 2 stems onto flower shaping paper using fern green ink and color lightly using bamboo leaves, add a small amount of sweet plum ink to shade, die cut and lightly edge with bamboo leaves. Shape the stems by hand using the flower shaping tools and the leaves face down into the shaping mold (these can be shaped at the same time as the florals).

Position the stems, flowers and leaves to one side of the card and hot glue into place. Sponge with dries clear glue and sprinkle with transparent glitter.

Stamp the sentiment using black ink onto white card, die cut using a circle die and adhere to the card base using foam pads.

Other Products: Bumble bee and pale papaya ink pads - Stampin Up!, white card, foam pads, hot glue

Instructions:

The ready card base from smooth white cardstock measures, 5 1/2″ by 8 1/2″. Choose the designer paper from Hollyhock Garden Collection and cut to size measuring 4 3/4″ by 7 3/4″. Glue the panel on Luxe Gold cardstock creating a sleek border of 1/16″ on all the sides. Layer the panel on the ready card base using double-sided tapes for extra dimensions. 

Cut all the required die cuts as shown from white and gold cardstock using Fancy Classic Oval Frame Die. Glue the delicate outer gold frame on a white die-cut to add extra strength and then paste it on the purple solid die cut that has been cut using the outer rim from the same set and green pattern paper from the designer paper series. Cut the center oval frame in white and paste it directly on the pattern paper in the window. Adhere gold die-cut on the back peeking through the whites, to the fancy oval frame. Layer the frame using double-sided tape.

For Hollyhock flowers, stamp a couple of large, medium, and small flowers using Tea Rose on flower shaping paper and cut the flowers using its coordinating dies. Color the flowers using the same ink and add highlights using Red Geranium archival ink. Shape the flowers using the coordinating mold and then add a few more strokes using the flower shaping kit. Once done, press the centers and add glitter balls. Finally, brush a thin layer of crystal lacquer on the flowers and keep them for drying.

Stamp, color and cut the foliage from Leafy Accent Cling Stamp Set and color them using Leaf Green and highlight them using Olive green and shape them using a deluxe flower shaping kit.  

Also, stamp a few fillers from Floral Shoppe Fillers Cling Stamp Set using Leaf green and Cactus Flower Archival ink and cut using the coordinating die set. Sponge adhesive that dries clear on the fillers and sprinkle mixed shades of prills. Dust extras and also sprinkle some Rajni Chawla’s Crystal Clear Powder and keep them for drying. 

Once all the elements are ready, assemble the card as shown and complete the card by adding a sentiment from Celebrate Love Sentiment Cling Stamp Set. 

Other Products: Smooth White Cardstock, Funnel Tray, Die Cutting Machine, Score Board, Paper Trimmer, Tweezers, Glossy Accent

Instructions:

Its a ready folded card measuring 9" by 6". Cut panel on Deluxe Paper measuring 8 3/4 by 5 3/4" and adhere it on the card base using dimensional tape. Cut another panel from Hollyhock Paper Collection which is slightly smaller than white panel and adhere this panel on the card using clear glue. Apply texture paste randomly on the panel using stencil and sprinkle glitter powder.

Diecut the shape on the green designer paper using Elegant Pocket Accents Die, add extra card layer underneath, add this border as shown using clear glue.

Diecut the frame from Fancy classic oval die set on the designer paper, add layer underneath for the sturdiness, add this frame on the card center using dimensional tape.

Stamp the flowers from Hollyhock Petals & Leaves Cling Stamp Set using Tea Rose Ink on the Deluxe Card, diecut using coordinating die color the edges with Coastal Coral Ink, and color the centers of each petal with Abandoned Coral Ink, shape the flower in shaping mold and finish shaping using Shaping Kit. Add mini prills in the center using clear glue, apply clear glue on the flowers using hydra sponge and cover with magic glitter powder.

Stamp the small leaves and Stems using Leaf Green ink on the deluxe paper, color the stems using Zig Markers, color the leaves with leaf green ink, shape leaves in the mold, cover with glitter.

Stamp leafy accents images with leaf green ink on deluxe paper, color the image with leaf green ink and mowed lawn ink using daubers, shape the leaves from back with golf groove tool, apply clear glue and cover with Nida Tanweer Magic Glitter.

Arrange all ready elements as shown on the card using hot glue and embellish the card with pearls, art pebbles and Nuvo Drops.

Other Products: Abandoned Coral distress ink, Stencil, Nida Tanweer Magic Glitter Powder, Hot Glue, Pearls, Mowed Lawn Distress Ink, Art Pebbles, Dimensional Tape.

Instructions:

Take a piece of Ivory card stock measuring 9 x12 inches, score and fold at 6 inches to create a side fold card base measuring 9 x 6 inches in size. Using sheet 9B and 5B from HCDP1-2143 Hollyhock Garden Paper Collection, cut mat layers which are 1/8th inch smaller in size than the card base and adhere them on the front and inside card panels. 

Using HCD2-7399 - Flourish Companion Frame Die, cut 1 each of the outer frame on sheet 1B and Ivory card stock each, layer them together. Sponge the edges of this layer using Leaf Green ink and adhere it to the card front using dimensional tape. Using the large decorative frame of the same die set, cut 1 piece each with Ivory and Gold card stock, layer them together with Ivory piece on top slightly off-centerd and adhere it on top of the mat layer. Again cut 4 pieces of the corner die from the same die set in Gold card stock and adhere them on the corners of the inside panel. 

Using HCD1-7283 - Courtyard Elegance Die, cut 1 each of the circle decorative piece with Ivory and Gold card stock. Cut mat layer for the circle with sheet 5B and Ivory card stock. Stack each of these layers together using dimensional tape and adhere this element to the right side of the card base leaving one half of it outside the base. Using sheet 3A, cut the sentiment 'Have a Beautiful Day' along with an Ivory mat layer, sponge the edges with Tiger Lily ink and adhere this piece to the center of the circle element using dimensional tape. 

Stamp a few images of the fence and the hollyhock stems using HCPC-31001 Hollyhock Fence Cling Stamp Set and HCPC-31000 Hollyhock Stem & Blooms Cling Stamp Set using using Sepia and Fern Green ink on white card stock. Color the images using Zig markers. Cut the images using their coordinating dies and adhere them on the card front with dimensional tape as shown. 

For the flowers, stamp several images of the flowers from HCPC-3999 Hollyhock Petals & Leaves Cling Stamp Set on flower making paper and the leaf images with Fern Green ink. Color the large flower images using using Tiger Lily and Lighthouse ink, the smaller flowers using Sunflower ink. Color the leaves using Leaf Green ink and sponge the edges using Night Sky ink. Cut all the images using their coordinating dies and shape using HCFB1-5012 3D Hollyhock Shaping Mold. 

For the large flowers, stack 1 large and 1 medium petal each and add stamens for the centers. Sponge some dries clear glue on the flowers and leaves, add crystal clear glitter and adhere the ready elements on the card base using hot glue. Apply dries clear glue on the Hollyhock stems, leaves and the tiny flowers and add crystal clear glitter. Finish off the card by adding some clear water droplets around the arrangement as shown.

Other Products: Ivory card stock, Dimensional adhesive, hot glue, hot glue gun, funnel tray, scissors, paper trimmer, die cutting machine, scoring board, paint brushes, clear water droplets

Instructions:

Use Hollyhock Garden Sheet 8B to make a 12 x 12” scrapbook page.

Use the Decorative Circle Frames die to cut out the largest frame in both White and Gold, adhere the 2 together off setting a little bit so the Gold shows. Cut out dies #3 in Gold, #4 in white and #5 for the picture. Add foam dots on the back of the Gold Circle and White Circle, add picture and adhere all to the page.

Stamp the Hollyhock Stems on white with Cottage Ivy, color with the New Sprout ink, cut out with the coordinating die, ink the edges with more of the Cottage ivy. Use the Flower shaping kit to shape.

Stamp the Hollyhock petals on white with the Black ink, color the center with a Yellow marker from the Zig Marker set, color the petals with Lulu Lavender, cut out with the coordinating die, place in the matching mold and run through the die cut machine to shape.

Stamp the Leafy Accents on white with Cottage Ivy, color with New Sprout and cut out with the coordinating die, ink the edges with more of the Cottage Ivy. Place in the matching mod and run through the die cut machine to shape, Adhere all the flowers and leaves on the page around the circle.

Die cut the letters out using the Letters and Numbers dies, add to the top of the page for a title.

To finish, add Recollections Black micro beads to the center of the flowers and glitter to all the leaves and flowers.

Other Products: Paper Trimmer, Die cut machine, Recollections Black Mirco Beads

Instructions:

Create a 5 x 7" card base in white cardstock. Cut out the frame of the Simply Classic Rectangle Frame Die in a piece of sky blue paper from the Hollyhock Garden Paper Collection and adhere with foam tape. Cut out the decorative die in white cardstock and adhere. Cut the center in sky blue designer paper from the Hollyhock Garden Paper Collection and adhere. Cut out the cottage scene with the center die and adhere with foam tape.

Stamp the gate from the Hollyhock Fence Cling Stamp Set in Rich Cocoa, cut out with coordinating die and adhere with foam tape on the left side of card.

Stamp the small hollyhocks from the Hollyhock Fence Cling Stamp Set in Jet Black and cut out with coordinating dies, sponge with Vibrant Violet, Coastal Coral and Magenta Hue, sculpt with stylus and add glitter. Adhere with foam tape as seen in photo.

Stamp the sentiment from the Cheerful Notes Sentiments Cling Stamp Set on white cardstock and cut out with the Arrows and Banner Die and adhere with foam tape as seen in photo.

Stamp the hollyhocks from the Hollyhock Petals & Leaves Cling Stamp Set in Vibrant Violet, sponge with Vivid Chartreuse and Vibrant Violet, cut out with coordinating dies and sculpt with the Hollyhock Shaping Mold. Add stamens and glitter.

Stamp the large hollyhock stem from the Hollyhock Stem & Blooms Cling Stamp Set in Olive, cut out with coordinating die and sponge with Vivid Chartreuse.

Stamp the leaves from the Hollyhock Petals & Leaves Cling Stamp Set in Olive, cut out with coordinating dies, sponge with Vivid Chartreuse, sculpt with Hollyhock Shaping Mold.

Adhere flowers and foliage as pictured.

Other Products: White cardstock, foam tape, die cutting machine

Instructions:

Card size is 5 x 7”. Cut Flower Shaping paper to 10 x 7”, score at 5”. Diecut card front using Noel Decorative Die outline as shown being sure the cutting board doesn’t cover the back cut blade to create a shaped card front. Cut paper from the Joyous Noel Paper collection to 5 x 7”, diecut Noel Decorative die, trim top of panel if necessary to fit card front, then ink edges with Deep Purple and Periwinkle ink. Diecut a second Noel Decorative die from light blue paper from paper collection for a soft shadow behind the first one, then adhere onto card front. Cut paper from paper collection to 4 13/16 x 6 7/8”. Ink edges with Night Sky and Deep Purple ink and adhere on inside of card base.

Stamp images onto white cardstock. Stamp Angel from Joyous Noel Angel stamp set twice using Olive ink. Stamp angel and harp from Starry Noel Angel Stamp set using Encore Gold ink, emboss with Antique Linen embossing powder, tap off and heat set. Stamp dove from same set using Night Sky ink. Use gold ink to stamp Joyous Noel Background stamp and fussy cut the banner. Diecut images with coordinating dies.

Color images with Stack and Store daubers along with the following inks. On one angel, color with Leaf Green, Olive, Gold, Periwinkle and Deep Purple inks. Trim off the dove on the second matching angel and color, then on the remaining angel apply Dries Clear glue with Hydra Sponge, apply Antique Linen embossing powder and heat set. Color the dove with twig image with Periwinkle and Leaf Green ink. Apply Gold to the banner and harp.

Shape images with your hands and for a light shape, use the stylus from the Deluxe Flower Shaping kit to give dimension to angel and dove. Layer the green colored angel onto the Embossed angel for a golden shadow and adhere second small dove onto harp. Cut a small piece of cheesecloth onto card front and adhere. Use scissors to trim off part of twig in large dove as shown, then adhere images as shown.

Apply Crystal Glitter onto card as desired, tap off and allow to dry.

Other Products: Antique Linen Embossing Powder, Cheesecloth, Paper Trimmer, Scissors, Diecutting Machine.