Other Products: Brick embossing folder, Foam Tape, Lavender cardstock, Copic markers: RV10, RV00, RV02, Y11, Y15, Y17, BV00, BV01, BV02, R00, R11, R21, R22, E53, E33, E35, E000, E00, E01, E93, V00, V01, B00, B02, B04, Y21, Y24, Y23, White Fun Flock, white card stock.

For more tips on creating with the Singing in the Rain collection, watch the tutorial at https://youtu.be/_J85LChrXSs.

Instructions: Bendi card size: 6 x 6 1/2". Cut white card stock 6 x 5 1/2 " and cut decorative paper 6 x 5 1/2" to cover (die cut and glue Regal Border from Lavender cardstock and glue to top before adding paper so that it is sandwiched between). Cut two side panels front and back (4 pieces) 6 x 5" and use curved border from Fleur Basics to cut the tops. Cut a Fleur Border from lavender card stock for both sides. Sandwich border between two layers for both sides. Score 1/2 " from edge on both sides (along tallest side on both) for tabs to glue to back of card. Draw a 1/4 " line on the short end of both and make a tab on both. On center panel, cut a slit to coincide with left flap tab, 4 1/2 " from left side. On left flap, make a slit to coincide with right flap tab, 2 1/2" from left edge. Glue flaps to center in the back using the 1/2" scored tabs you made on each long end.

I used decorative paper with a scene on the inside of each flap so I did not add anything else this time. For the center and outside of flaps I stamped using Memento Tuxedo Black, die cut and colored cottage, cottage accents, dogwood, wildwood florals, blossoms, fairy, bird in branch, birds, birdbath, and wheel barrel. Emboss cottage with bricks and rub Worn Lipstick over the embossing. Add windows and door and glue to center of card. Use the Deluxe Flower Shaping Kit to lightly shape all the elements and add dogwood to each side of center and some flowers at the bottom (avoiding slit). Add Prills to center of flowers, glue Fun Flock to round blossoms. Glue bird to dogwood branch at top right.

For left flap, glue a piece of leftover dogwood to left side, glue wheel barrel to right side and pop up fairy with a bird in her hand to left over part of dogwood. For right flap, glue birdbath with bird to center area and pop up bird in branch to right top. (Always avoid slits for ease of opening and closing Bendi Card.). Glue ultrafine glitter to wings of fairy.

Other Products: Green cardstock Vintage Photo Distress Ink, Glue Gun, Mini Mister, Misti, Ranger Clear Crackle Paint, mounting tape, Copic Alcohol Ink Markers. (Skin tone- E000, E00, E11, E24, R20, Hair - C3, C5, C6, C8, Dress/Boots - B00, B21, B24, B28, Bird - B000, B00, B21, Branch - E57, E35, Flowers - RV00, RV21, RV34, Leaves - G40, G45 ), X-Press It Blending Cardstock, Squeezed Lemonade Distress Ink.

For more tips on creating with the Singing in the Rain collection, watch the tutorial at https://youtu.be/_J85LChrXSs.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

For more tips on creating with the Classic Rose collection, watch the tutorial at https://youtu.be/Z8P070kC3oo.

Instructions: Create a 5 1/2 x 5 1/2 inch top folding card from heavy white cardstock. Cut base layer from green layering cardstock at 5 1/4 x 5 1/4 inches. Select the green designer paper from the Singing in the Rain Collection and cut at 5 x 5 inches. Adhere the layers and cut a window in the center of the card using Circle Basics Large Die and Eyelet Circle and Basics Small Die. Cut an eyelet circle for a decorative layer around the window. Adhere the layers with double sided tape and the eyelet layer around the window with Designer Dries Clear Adhesive.

Stamp the fairy image from the Songs of Spring Stamp Set on X-Press It Blending Cardstock using Memento Tuxedo Black Dye Ink. Color the image with Copic Alcohol Ink Markers. (Skin tone- E000, E00, E11, E24, R20, Hair - C3, C5, C6, C8, Dress/Boots - B00, B21, B24, B28, Wings - BV00, BV01, RV00, RV 01, Bird - B000, B00, B21, Branch - E57, E35, Flowers - RV00, RV21, RV34, Leaves - G40, G45). Die cut the image with the corresponding die.

Stamp the rose petals from the Classic Rose Collection using Butter ColorBox Fluid Chalk Ink. Sponge with Squeezed Lemonade Distress and Lime Pastel ColorBox Ink. Lightly mist with water using the mini mister and shape using the Rose Molding Plates. Add additional shaping with the Deluxe Flower Shaping Kit if desired. Adhere the petals using Designer Dries Clear Adhesive, off-setting each layer. Cut the leaves from green cardstock and sponge with Memento Olive Grove Ink. Shape with the Deluxe Flower Shaping Kit. Adhere Ranger Clear Crackle Paint to the flowers and leaves and lightly sprinkle Rajni's Frosting Powder. Lightly heat set. Adhere the leaves and roses around the lower left side of the window with a hot glue gun. Adhere the fairy image overlapping the upper right side of the window. Avoid applying the hot glue to the part of the image that hangs over the open part of the window.

Other Products: Smooth white Cardstock, Peeled Paint Distressing Ink, Zig Clean Clear Brush Markers, Water Color Brush, Archival inks black, Plum, Leaf Green, Library Green, Fern Green, Deep Grape ColorBox ink, Harvest ColorBox ink. Grand Labels 1, Distress ink Vintage Photo.

For more tips on creating with the Singing in the Rain collection, watch the tutorial at https://youtu.be/_J85LChrXSs.

For more tips on creating with the layered card & shadowboxes, watch the tutorial at https://youtu.be/DrMIKI-XTmI.

Instructions: To see more photos of this project, click here. Firstly, construct 2 shadow boxes. Choose pattern papers as shown and paste them into the box. In the left side of the shadow box, the chair is fussy cut and then layered in the same place using foam tapes. Cover the front of the shadow box. For cutting the window use Cut Mat and Create 2A Die. Now, close the shadow boxes using 1/2" strip on all the four sides. Cut a white die cut frame from Grand Labels One from purple pattern paper and one from white cardstock. Stack both the die cuts together. Prepare 2 pieces of the same kind and adhere them on the front of the shadow box.

To make the cover of the Project, Cut 2 pieces of white cardstock measuring 6 1/2" by 7 3/4". Score at 1 1/4" on the longer side. Glue the scored 1 1/4" panel of the first piece to the 1 1/4" scored piece of the second piece. This will form the front, back, and spine of the project. Now Choose the pattern papers for the front, back and inside panels. Refer to the pictures.

Once the front cover is covered with patterned paper, choose another one from the same collection to create the top fancy panel. It should measure 5" by 6". Chop all the four corners using corner punch and layer it on the right side of the front cover, keeping a ribbon underneath to create the closure of the project. On the left side glue a fancy lace border from the Sweet Heart Borders die set. Fussy cut the focal image from patterned paper and layer it on the front top panel. Decorate the front using flowers from Wildwood cottage Collection, a pair of painted boots, painted festive gate and a fussy cut puppy. Add sentiment as shown and highlight with glitters.

For the inner panels, cut 2 solid pieces from Grand labels one and glue them on either side of both panels. Adhere the shadow boxes using tacky glue. Stamp various foliage images from Rain Boots and Blossoms Cling Stamp Set with Library Green archival ink, cut them using its coordinating die, and color them using Leaf green archival and zig markers. Shape them using Deluxe flower shaping kit. Also, stamp and cut Festive Gate from Celebrate the season Collection and paint it using Vintage Photo Distress Ink. The umbrella image and the fairy image is stamped with black archival and cut using their coordinating dies. Both the images are painted using Faber Castell Pencil Colours.

For flowers, stamp and cut floral images from Wildwood Floral stamp and die set and paint them using Deep Grape Color Box ink. Color the center with Leaf Green. Shape the flowers using Deluxe Flower Shaping Kit and add Rock Candy Stamens. Also, stamp various leafy images from the Singing in the Rain Collection and paint them using Broken China, Peeled Paint, Rusty Hinge and Raspberry Pink. Shape them using flower shaping kit and add prills using an adhesive that dries clear.

Once all the elements for shadow boxes are ready, decorate them by layering the images using foam dots and creating small flower bouquets. Assemble all the elements as shown and complete the center panels.

For the back panel, Fussy cut the image from the pattern paper and create a pocket by gluing 3 sides. Add jute cord to the tags and add them to the pocket. Glue a ribbon underneath the pocket to create a closure for the project.

Other Products: Memento Dye Ink Pad - Pear Tart; Glitter Ultrafine Transparent - Orange Crush, Ensalada, Pink Azalea and Blue Boy; Want2Scrap 250 Count Rhinestones - Iridescent; Ranger Stickles - Yellow

For more tips on creating with the Singing in the Rain collection, watch the tutorial at https://youtu.be/_J85LChrXSs.

For more tips on creating with the Wildwood Cottage collection, watch the tutorial at https://youtu.be/g8WLXE8hLRk.

Instructions: Create a 6" x 6" card base out of white card stock. Cut a 6" x 6" card front from the Singing in the Rain Paper Collection and die cut the center image using the coordinating Circles Basics Large Die. Sponge edge of card front with Bamboo Leaves Memento Ink and adhere directly to card base with Dries Clear Adhesive.

Die cut a piece of pink design paper with the eyelet die from Eyelet Circles and Basics Small Die set. Sponge die cut eyelet circle with Rose Bud Memento Ink. Matte die cut image on eyelet circle and adhere to card front with pop dots. Cut sentiment from design paper and sponge edges with Danube Blue Memento Ink and adhere to card with pop dots.

On White Cardstock with Tuxedo Black Ink stamp the heart shaped vine image using the Rain Boots and Blossoms Stamp Set and stamp the blossoms with the Wildwood Florals Stamp Set and die cut all with coordinating dies.

Using Stack and Store Daubers and the Dove Blender Pen as needed for fine detail, color five of the wildwood florals with Summer Sky Memento Ink and the other two florals with Rose Coral Memento Ink; color the heart shaped vine using Pear Tart and Bamboo Leaves Memento Inks and the hearts with Rose Bud Memento Ink.

Using the Deluxe Flower Shaping Kit, shape the florals and the vine. Cut the vine as needed and adhere all to the card as shown using Dries Clear Adhesive.

With Dries Clear Adhesive add Hot Mama Prills to the center of the blue floral and add Blue Suede Shoe Prills to the center of the pink floral.

With Dries Clear Adhesive add Ensalada Glitter to the die cut vine and also to the greenery and the green line on the rainbow on the design paper; add Pink Azalea Glitter to the pink hearts, pink wildwood florals and pink flowers and pink stripe of the rainbow on the design paper; add Blue Boy Glitter to the blue wildwood florals, the blue flowers on the design paper, and the blue stripe on the rainbow; and add Orange Crush Glitter to the orange stripe of the rainbow and to the orange flowers on the design paper.

Add Yellow Stickles to the centers of the flowers on the boots on the design paper. Finish by adhering an Iridescent Rhinestone to the sentiment, as shown.

Other Products: Zig Brushes, glue gun, Foam tape, double sided tape, mini mister, Sizzix, Trimmer, Zig brushes.

For more tips on creating with the Singing in the Rain collection, watch the tutorial at https://youtu.be/_J85LChrXSs.

Instructions: It's a single fold card with elements attached on the front panel of the card. Start by taking a white card stock folded and measuring at 6.5" x 4.5". It has 2 mat layers so cut the first layer at 1/8" less than the card base and the second layer at 1/8" less than the first layer. Both the layers are created using patterned paper from the collection.

Choose the umbrella image from the stamp collection and stamp it on a white card stock using black archival ink. Color the stamped image using Zig brushes. Similarly stamp the little birdie image and the branches using Archival black ink on a white card stock. Color all the stamped images using Zig brushes. Also stamp some sunflower images from the beary fun collection and color the images using Zig brushes.

Once all the images are colored, die cut all the pieces using the coordinating dies. Using a mini mister spray and damp the images to a little extent. Later using one of the ball tools from the Deluxe Flower Shaping Kit, shape the leaves, birds and the umbrella to make it look protruded. This will help create a dimensional look to the images.

In order to assemble the card, place the stamped Umbrella first and then layer all the leaves, branches and the little birdie towards the top of the card. Towards the bottom die cut a strip of decorative border die from a white card stock and layer it. Tuck in the leaves, sunflower accents from the bottom. Finish the card by layering a fussy cut sentiment from the paper collection.

Other Products: White Cardstock, Prisma Color Pencils: PC992, PC994, PC933, PC940, PC-939, 734 White, Odorless Mineral Spirits, Dimensional Tape

For more tips on creating with the Singing in the Rain collection, watch the tutorial at https://youtu.be/_J85LChrXSs.

For a video link for creating with the Wildwood Cottage Collection: https://youtu.be/g8WLXE8hLRk.

Instructions: My card size is 5 1/2 X 5 1/2". Make white card base and cover with a piece of the paper collection.

Stamp the images and flowers with Memento Tuxedo Black ink, color with the Prisma pencils, cut out using the coordinating dies, shape the flowers with the Deluxe Flower Shaping Kit and set aside to dry.

Add the Crystal Clear to the image and then adhere to card front using dimensional tape. Once dry glue the flowers to the card front.

Then cut out one of the tags from the paper collection using the Luggage and Tags Die, ink the edges with Bamboo Leaves ink and again use dimensional tape to adhere to the card front.

Other Products: White Cardstock, Corner Rounder, Ribbon, Memento Dandelion ink.

For more tips on creating with the Singing in the Rain collection, watch the tutorial at https://youtu.be/_J85LChrXSs.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Begin making your tag by cutting a piece of White Cardstock 8 x 3 3/4", layer it with a piece of the Singing in the Rain paper cut 1/4 inch smaller after rounding the 2 top corners.

Using the Words of Encouragement Stamp, stamp at the top of the tag with the black ink.

Make a bow and adhere to the top of the tag.

Stamp the leaves on white with Bamboo Leaves and lightly color them in with the same ink. Cut out using the coordinating die and place in the Flower Shaping Mold. Stamp the flowers on white with Color Box Chambray, color the centers with the Memento Dandelion and the edges with more of the Chambray. Cut out, place in the Flower Shaping mold, run through the machine, place 2 together and glue in place with dries clear adhesive on the tag.

Stamp the birds on white with the Chambray, color with Toffee Crunch on the bottom and Summer Sky on top, cut out, shape and adhere to tag,

To finish the tag, using dries clear adhesive, add Crystal Clear to the birds, leaves and flowers. Add Prills to the center of each flower.

Other Products: Distress Ink Colors Shaded Lilac, seedless preserves; peeled paint; abandoned coral; glue gloss; canson water color paper; corrugated paper, may arts ribbon.

For more tips on creating with the Singing in the Rain collection, watch the tutorial at https://youtu.be/_J85LChrXSs.

For more tips on creating with the foam paper & stamens, watch the tutorial at https://youtu.be/Oma6ctVmUD0.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

For more tips on creating with the layered card & shadowboxes, watch the tutorial at https://youtu.be/DrMIKI-XTmI.

Instructions: Card base is 6.5 x 6.5". Stamp and cut with matching dies all your elements using Coffee archival ink on canson water color paper. Including the wildwood florals; classic vine; all the elements from the Singing in the rain collection. Color your florals using shaded lilac and seedless preserves. I colored some of the elements using Abandoned coral. All the leaves were colored using peeled paint.

Pierce your flowers to make room for the stamens, lightly mist then Mold the flowers using the 3D shaping mold. Insert the stamens and set with a bit of dries clear adhesive. Use glue gloss and sprinkle with crystal clear.

Take the 5 x 5" shadow box and cut papers to fit outside of box using Cut Mat Create Die, outside border strips are approx. .5 x 5". Color edges with Peeled Paint distress ink, cut a panel for the inside of the box which measure approx. 5 x 5". Adhere the box together. Take your Festive Holiday Die and cut this out on a coordinating pattern paper and attach to the back of the shadow box card. I cut two mats from the paper collection to go on the back of this, one is 5.5 x 5.5" and the other is 6 x 6" and then the corrugated mat layer is 6.5 x 6.5". Color the edges of the two layers from the paper collection with Peeled Paint distress ink. Attach your ribbon, then I matted this on a white card base. Complete and assemble card as shown. Add your preferred sentiment and detail with more crystal clear if you like.

Other Products: White cardstock, Creme Cardstock, Green cardstock, Pearl pen creme and, Cutting machine (Big Shot), Scissor, Ruler, Seambinding Ribbon, Stickles, Embossing Folder Bubbles, Distress tool, fineliner, Twinmarker chocolat 92, Twinmarker violet 84, Foamtape.

For more tips on creating with the Singing in the Rain collection, watch the tutorial at https://youtu.be/_J85LChrXSs.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Cut a piece of Green cardstock at 8 x 12" and fold it in half so it is 8 x 6". Now cut a piece of the design paper at 5 3/4 x 7 3/4" and make the edges rough with the distress tool and ink them with the teal zeal ink. Glue this on top of the card base with dries clear adhesive.

Take a piece of the same Green cardstock as the card and cut it at 4 1/4 x 5 3/4", put this in the embossing folder and run it through the die cutting machine. Now cut 4 strips from the embossed cardstock, each 1 inch wide and different lengths and cut a V shape out on the bottoms. Glue them next to each other with 1/8" of space in between them and on top. Cut another strip and glue that on the top over all the vertical strips. Cut a border out of creme cardstock with the Ornate Borders and Pockets Die and glue this on the top strip. Make a bow and adhere it to the Ornate Border. Cut a saying from the paper collection and mat this on a green background, (also a patterned paper) and glue this on the right bottom corner. Glue a leftover piece of the Ornate Border die on top of that.

Now stamp with Black Tuxedo Ink the Umbrella from the Songs of Spring Stamp and color it with the Rose Bud, Bamboo Leaves, Teal Zeal, Cantaloupe, Twinmarker Chocolat, twinmarker Violet. On the tiny flowers you can put dots with the pearl pen. Wrap a piece of ribbon around the stick of the umbrella then Glue the umbrella with some foam tape on the card and let the ribbon come out on the bottom, cut a V shape out of the end and tape that down. Put some stickles on the birds and Umbrella for some bling.

Other Products: Coloured Pencils, Ebosser, Emerald Green and Celeste Blue Ink pads

For more tips on creating with the Singing in the Rain collection, watch the tutorial at https://youtu.be/_J85LChrXSs.

For more tips on creating with the layered card & shadowboxes, watch the tutorial at https://youtu.be/DrMIKI-XTmI.

Instructions: Assemble the Layered card from the back forward. Cut 11 6 x 6" panels from the Singing in the Rain paper collection. Use the Eyelet Circle and Basics Small Dies and Circle Basics Large Dies to cut out the centres then glue these onto each page of your layered card using Dries Clear Adhesive.

Stamp and Colour all of the elements from the Rain Boots and Blossom's, Songs of Spring, Singing in the rain and Birds and Blooms Cling Stamp Sets. Cut them out with the coordinating dies, shape them with the Deluxe Flower Shaping Kit and adhere them to your card throughout each of the pages.

Other Products: Pearl White Metallic Cardstock, Blue Metallic Cardstock, Crafters Companion Dry Stone Wall Embossing Folder, Dimensional Tape, Sponge, Sparkle Sheer Shimmer Spritz, Memento London Fog Ink, Hot Glue Gun, Zig Clean Color Real Brush Markers: Cornflower Blue, Dark Pink and Violet.

For more tips on creating with the Singing in the Rain collection, watch the tutorial at https://youtu.be/_J85LChrXSs.

For more tips on creating with the Winter's Eve collection, watch the tutorial at https://youtu.be/Hf9-3YQWBXM.

Instructions: Create a 5" x 7" card base from pearl white metallic cardstock. Cut a metallic blue mat layer 4 7/8" x 6 7/8". Cut a white pearl mat layer 4 3/4" x 6 3/4"and emboss with embossing folder. Adhere the blue mat to the card base with Dries Clear Adhesive. Adhere the white embossed layer to card base with dimensional tape. Cut a piece of designer paper 4 7/8" x 6 7/8", ink the edges and adhere to the inside of the card.

Stamp the window on pearl white metallic cardstock with London Fog Ink, cut out with matching die and ink the edges. Adhere clear cardstock to the back of the window frame. Cut a piece of the designer paper, add glitter and adhere to the clear cardstock using Darice adhesive foam strips. Cut out all the pieces from the Window Box Elements Die set from blue metallic cardstock and adhere to the window with Dries Clear Adhesive as shown. Adhere the window to the card base using dimension tape. Diecut the window box from pearl white metallic cardstock and assemble using dries clear adhesive. Cut another window box elements die from pearl white cardstock, trim and adhere to window box along with the blue window box trim. Adhere the window box to the card base.

Stamp the blossoms and leaves from the Rain Boots and Blossoms cling stamp set on white cardstock with Memento Tuxedo Black Ink. Color the stems and leaves with Bamboo Leaves ink using the Stack and Store Daubers. Color the blossoms with the Zig Clean Color Real Brush markers. Shape with the Deluxe Flower Shaping Kit and spray with Sparkle Sheer Shimmer Spritz. Add drops of Nuvo White Crystal Drops to the centers of the puff blossoms. Add the blossoms and leaves to the window box using hot glue gun. Sponge them with dries clear adhesive and sprinkle with Rajni Chawla's Crystal Clear.

Other Products: 3D foam tape, Waterproof red ink, hot glue gun, pink pigment ink, stencil mask 13 arts, art stones, 3D clear medium.

For more tips on creating with the Singing in the Rain collection, watch the tutorial at https://youtu.be/_J85LChrXSs.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Take an 8 1/2 x 11" Kraft cardstock, score and fold at 5 1/2". This will be your card base. Select paper from Singing in the Rain Paper Collection, cut it 1/8" smaller than your card base and adhere with dries clear adhesive.

To create flowers, stamp the Classic Rose Cling Stamp Set on paper with waterproof red ink and cut using the coordinating dies. Colour with pink pigment ink. You will need two petals for each flower to create flowers. Sponge the petals with dries clear adhesive and sprinkle with Ultrafine transparent glitter. Using the 3D Rose Shaping Mold shape flowers as shown in the tutorial.

Layer the petals together using the hot glue gun making sure to offset them. Use a paper piercer to make a hole in the middle and pull through the stamens from the set. Add a little hot glue to the underside of the flower to adhere. Sponge the petals with dries clear adhesive around card and sprinkle with Rajni Chawla's Crystal Clear glitter.

Use stencil mask on the background, use some art stones to decorate background. Choose the sentiment from the paper collection, cut in out and place using 3D tape. Adhere the flowers as shown.

Other Products: Archival ink Plum, White card stock, Spellbinders labels die.

For more tips on creating with the Singing in the Rain collection, watch the tutorial at https://youtu.be/_J85LChrXSs.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Cut a card base from white card stock 7" x 5". Cut a mat layer from the paper collection 4 3/4 " x 6 3/4 " and adhere to the card front using clear glue. Cut two border dies using white card stock and adhere on the card front using the pattern paper and layering them as shown using foam dots.

Cut a panel from the paper collection using the botanical window inner die. Cut the outer layers in white card stock and layer them together using clear glue. Adhere on the card front using foam dots.

Stamp the classic rose flowers in Plum colour and colour with vibrant fuchsia, butter cup and plum colour. Cut with matching die and shape in the flower mold. Watch the video above to see how to mold flowers. Shape the flowers a little more with the tool kit. Add stamens. Stamp, color and cut the leaves and other flowers and foliage and colour with matching colours.

Stamp a rain boot in black ink and cut with matching die. Colour the image with Zig markers and shape a little with ball tool. Adhere on the window die cut using foam dots and place flowers inside using clear glue.

Arrange the flowers and leaves on the card front as shown. Cut a spellbinders label. Stamp the sentiment and adhere on the card front to finish the project.

Other Products: Carad`ache Neocolor II watersoluble wax pastels: 140-Ultramarine, 230-Yellow Green, 070 Scarlet, 220 Grass green, 031-Orangish yellow, 159-Perssian blue, 081-Pink, 059-Brown, 051-Salmon, 211-Jade green, 100-Purple violet. Distress Inks: Walnut Stain, Victorian Velvet. Other: Diamond stickles, Heat Gun, Water Mister, Inking tool, Water coloring brush, Scissors, Ruler, Coffee Archival Ink, Hot glue gun, Fussy Cutting Scissors, Double sided Tape, Double Sided Foam dots, White organza ribbon, Misti stamping tool.

For more tips on creating with the Singing in the Rain collection, watch the tutorial at https://youtu.be/_J85LChrXSs.

Instructions: The finished size of this card is 5.31 in x 5.31 in (13.5cm x 13.5cm) Taking the white card-stock, make a tent fold card to the above measurements. From the paper collection find the pink design paper and cut a card front matting a little smaller than the card base. Ink the edges of this paper first with the Victorian velvet distress ink and then with the Walnut stain ink.

Using the same design paper cut a small heart shape using both the scalloped heart edge and the plain heart edge to make a heart shaped ring. From the same heart dies, cut 2 extra from the white card stock to make a chippie. Again from the same design paper cut the two doilies using the Festive Holiday die and cut the window box once from the Window Box Elements die set. Using the Victorian Velvet ink, ink the edges of the window box and the heart ring. Find the printed tag used in the paper collection. Ink around the edges with the Victorian velvet ink.

Taking the white card-stock, archival coffee ink and stamp the images used for this card from the Wildwood Florals, Rain Boots And Blossoms, Songs Of Spring and the Wildwood Accents stamp sets. Bring color to the images using the colors listed as a guide. Once all has been colored die cut the images with the matching die set and shape with the Deluxe Flower Shaping Kit. To decorate the card front: Adhere the two doilies to the card front, then adhere the window box to the lower center of the card front. Wrap the ribbon around the card front and secure with a triple bow. Secure in place in line with the already adhered flowers. Adhere a few flowers over the knot of the bow. Taking the tag, adhere a flower cluster arrangement to the top of the tag. Apply the Nuvo crystal drops to the flower centers. Adhere the tag in place in the window box with double-sided tape. To finish the card, apply stickles to the little girls dress skirt edge, collar, and cuffs.

Other Products: Creative Expression Iris Cardstock, Heart of Gold Prills, Lavender ribbon, Stamp positioner, Brilliance Pearlescent Lavender.

For more tips on creating with the Singing in the Rain collection, watch the tutorial at https://youtu.be/_J85LChrXSs.

Instructions: To view a larger photo of this project, click here. Cut a piece of Iris cardstock 8 1/2" x 4" and die cut both ends with the HCD1-780 Ornate Borders and Pockets die to create the tag. Cut a piece of patterned paper 4 3/4" x 3 3/4" and adhere onto the tag.

Die cut the smallest eyelet oval out of the Iris cardstock and adhere to the tag. Die cut the light orange patterned paper using the next size edge die from the Small Eyelet oval set. Die cut the oval image from the patterned panel. Using a stamp positioner stamp the Thinking of You image from the HCPC-3812 Raindrop Sentiments stamp set in Tuxedo Black ink on this oval image and then adhere to the tag as shown.

To make the leaves stamp the images from the HCPC-3811 Rain Boots and Blossoms Stamp set in Bamboo Leaves on white cardstock. Colour the images with Bamboo Leaves ink and die cut with the coordinating die. Shape and adhere to the bottom and top of the oval as shown.

To make the flowers stamp the images from the HCPC-3769 Wildwood Florals Stamp set in Rose Coral and Lavender inks and die cut with the coordinating die. Sponge the edges with the coordinating inks and shape using the Deluxe Flower Shaping kit. Add Heart of Gold prills to the centres and Crystal Clear using Dries Clear Glue. Add the flowers to the leaves as shown.

To finish, add the ribbon bow to the top of the tag as shown.

Other Products: White cardstock. Glitter embossing powder.

For more tips on creating with the Singing in the Rain collection, watch the tutorial at https://youtu.be/_J85LChrXSs.

Instructions: Cut white cardstock to 10"x 7" and score at 5" to make card base size 5"x 7". Now take another white cardstock and cut one border die from Elegant Border Basics die and tear it and paste it on the left top edge and right bottom edge.

Now take designer patterned paper and cut it a little smaller than the card base. Tear the edges and adhere to the card with designer dries clear adhesive. Now create another layer with white cardstock size 4.5"x 6" and tear the edges. Now stamp raindrops from raindrop sentiments with versamark ink on the white cardstock and then sprinkle glitter embossing powder and heat it with heat tool. And adhere it with foam tape to give some dimension.

Now cut fairy and rainbow image from pattern paper with matching dies. Paste them with foam tape as shown.

Next stamp some petunia flowers with archival ink carnation red and manganese blue ink and cut them with matching die and colour them with archival ink carnation red and sunflower ink. Shape them with the flower shaping deluxe tool kit. Then add some stamens at the centre of the flower and sprinkle crystal clear.

Now stamp some blossoms from rain boots and blossoms cling stamp set and cut them with matching dies, color and shape them and assemble as shown.

Add sentiment from designer paper collection. "Have a Beautiful Day".

Other Products: Chameleon Pens (BL3 Sky Blue, OR3 Tangerine, NU1 Bisque, RD2 Red Coral, YG3 Spring Meadow, YL2 Sumer Sun) Chameleon Color Top- BL7 Indigo, Scrapbook Adhesives by 3L (Extreme Double Sided Tape, Dual Tip Glue Pen, 3D Foam Squares- Mix, Adhesive Dots- Medium and Micro), Mini Frame, Cork, Cork Coaster, Thread Spool, Wood Spindle, Coral Silk Ribbon, Corner Rounder, Mini Wooden Bucket, White Paint, Spectrum Noir Sparkle Pen, Stampin' Up Ink (Early Espresso, Crushed Curry), Close To My Heart Ink- New England Ivy.

For more tips on creating with the Singing in the Rain collection, watch the tutorial at https://youtu.be/_J85LChrXSs.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: (To view a larger photo of this project, click here.) Every night when I go to bed, I take my earrings and wedding ring off and I put them in a special dish in my bedroom. I created this Umbrella Jewelry Keepsake Holder for just that purpose, a pretty place to place the items I love each night. Measure the cork coaster and cut a piece of the blue patterned paper that is slightly smaller. Round the corners and adhere to the cork coaster using Extreme Double Sided Tape. Paint the mini bucket, thread spool and wood spindle with white paint. Let dry. Adhere the thread spool and spindle together and adhere to the back of the cork coaster base. Adhere the mini frame with cork inside to the spindle. Adhere the bucket in front of the mini frame onto the base. Add the silk ribbon bow around the spindle.

Stamp and die cut 2 of the birds and umbrella using black Archival Ink. Stamp and die cut 1 set of Delightful Daisies using dark brown ink (Early Espresso). Stamp and die cut 1 set of the smallest Small Classic Petunia (for the leaves only) using dark brown ink. Add color to one of the smallest daisies using Crushed Curry ink and a dauber. Shape using the 3D Floral Basics Shaping Mold.

Add color to the petunia leaves using green ink (New England Ivy) and a dauber. Shape using the Deluxe Flower Shaping Kit. Add yellow Prills to the middle of the daisy using liquid adhesive. Let dry. Adhere the flower and leaves to the front of the mini bucket.

From one of the stamped images of the birds and umbrella, cut off just the top of the umbrella, and the birds. I like to add color to all layers of a layered piece. I also ended up using one of the mini clusters of flowers cut from the umbrella. Add color to the umbrella and birds image using Chameleon Pens. Color the top of the umbrella using Red Coral. Add color to all of the leaves and vines using Spring Meadow. Add color to the middles of the flowers using Summer Sun. Add color to the umbrella handle and topper using Bisque. Add color to the birds chests using Tangerine with a 3 second fuse. Add color to the birds using Sky Blue and the Indigo Color Top using a 4 second fuse.

I added sparkle to the birds and umbrella using a sparkle pen. Using 3D foam squares I adhered the umbrella top over the original image. I took a small cluster of flowers that I cut off earlier and added them to the top of the umbrella, again using 3D foam squares. I added the birds, again using 3D foam squares on top of the original image. Adhere the layered image to the middle of the mini frame using 3D foam, this might take a few layers of foam to bring it above the frame edge.

Other Products: White Card Stock, Cut File, Versafine Deep Lagoon Ink, Metallic Chalks, Derwent Water Color Pencils (#63, #15, #7, #51 and #31), Versamark, Red Cinnabar Embossing Powder, Gala Glitz Orange and die cutting machine.

For more tips on creating with the Singing in the Rain collection, watch the tutorial at https://youtu.be/_J85LChrXSs.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: To see a larger photo of this project, click here. Start by taking the cut file found here. https://www.3dsvg.com/shop/summer-svg-files/honey-bee-fairy-house-svg/?affiliates_svg=110 and cutting the base out of White card stock and the panels from the Singing in the Rain Paper Collection and assembling according to the directions.

The songs of spring image was stamped on white card stock using deep lagoon ink and die cut with the matching dies before coloring with a combination of metallic chalks and Derwent water color pencils.

The flowers were stamped on white card stock using versamark and heat embossed with red cinnabar embossing powder before die cutting with the matching die and shaping using the flower shaping mold and tweaking with the flower shaping tools before coloring with metallic chalks and accenting the centers with gala glitz orange. I also used craft wire bending it slightly to attach the little Fairy image.

Other Products: Stampin Up Early Espresso Ink, Cherry Cobbler, Night of Navy, Garden Green, Pumpkin Pie and Marina Mist and Powder Puff Ink.

For more tips on creating with the Singing in the Rain collection, watch the tutorial at https://youtu.be/_J85LChrXSs.

To see more photos of this project, click here.

Instructions: Page One: Stamp the Singing in the Rain little girl with boots facing right with Early Espresso ink on white cardstock and on vellum. Color the little girl with Stampin Up Cherry Cobbler, Night of Navy, Powder Puff and Early Espresso ink. Die cut the little girl from white cardstock and vellum. Cut off the white cardstock wings and attach the vellum wings. Apply small amount of glitter to the wings. After coloring the little girl's boots add 3D lacquer to the boots to make them shine. Glue picture from the Singing in the Rain paper collection to the page. Cut out and apply the Have a Beautiful Day sentiment to the front of the card. Glue the little girl and pink and yellow prills into place.

Page Two and Four: Add 3D lacquer to the water puddles and let dry. Glue picture from the Singing in the Rain paper collection to the page and add pink and melon prills to the flowers.

Page Three and Five. Glue the appropriate picture from the Singing in the Rain collection to the page. Add pink and melon prills to the flowers in the image.

Page Six - Nine: Glue appropriate image to each page of the card and add blue, melon, yellow, pearl white and lavender prills to the flowers in the images.

Other Products: Hot Glue Gun, Tim Holtz: Faded Jeans, Red Stamen Bead Spray, Watercolor paper, Zig Clean Color Pens.

For more tips on creating with the Singing in the Rain collection, watch the tutorial at https://youtu.be/_J85LChrXSs.

Instructions: Score your plain white cardstock to 4 x 4.75" this will be your card base. Next take a piece of patterned paper from your paper collection and cut the pre-printed card front from the collection of sheets. Adhere this to the card front using Dries Clear Adhesive.

Once done you will then cut two Festive Holiday dies using white cardstock, which you will adhere to the outer edge of the card for added decor.

Now stamp/diecut using the Stazon red ink a total of 6 Botanical Rose flower. After they have been diecut add a touch of Stazon Blazing Red and Tim Holtz Faded Jeans distress ink to the flower petal edges for depth.

Now using your tweezers from the flower making kit twist each of the petals to shape and glue the large and medium size rose on top of one another. Then add the red bead spray to the flower centers. Once complete fussy cut some leaves from the Classic Rose collection and arrange as desired to your flower spray.

Next stamp the umbrella and birds image from the Songs of Spring stamp set using Black Stazon ink on the watercolor paper. Then color the image using the Zig Clean color pens and diecut with the coordinating die. Once complete adhere it to the card front.

Other Products: Picked Raspberry, Gathered Twigs, Mowed Lawn Distress ink, Picked Raspberry, Wild Honey & Black Soot Distress Oxide ink, Sizzix Tim Holtz Bricked Embossing Folder.

To see how to shape the mum, watch the video at https://youtu.be/jJBwQyyza6g.

Instructions: Take a 6" x 6" white card base & ink all the edges using Gathered Twigs Distress ink & Stack and Store Daubers. Splatter some of the same ink on it. Take a piece of 5 1/4" x 5" white cardstock & emboss it using Sizzix Tim Holtz Bricked Embossing Folder. Take another piece of white cardstock & die cut it using the Eyelet Oval Die. Ink both the pieces using Gathered Twigs Distress ink. Adhere these to the card base as shown using 3D Foam Circles.

Take a piece of white cardstock & die cut it using Sweetheart Borders Die. Cut the die in 2 pieces & use the thinner piece for this card. Ink this piece using Black Soot Distress ink & Distress Oxide ink. Adhere on the card base as shown.

Stamp the Enchanted Mum Cling Stamp Set on a piece of white cardstock using Picked Raspberry Distress ink & die cut using matching die from Enchanted Mum Die. Ink it using Picked Raspberry & Wild Honey Distress Oxide inks & Stack and Store Daubers. Shape them using Deluxe Flower Shaping Kit. Stamp the leaves from Open Leaf Cling Stamp Set on a piece of white cardstock using Coffee Archival Ink & die cut it using matching die from Classic Leaf Die. Die cut another piece of white cardstock using the swirls die from Cut Mat Create 2A Die. Ink this die cut & the leaf with Mowed Lawn Distress ink & Stack and Store Daubers. Shape the flower & leaves using Deluxe Flower Shaping Kit. Add some green stamens from Small Pastel Pearl Stamens to the flower center.

Stamp the sentiment from Today's Quotes Stamp Set on a piece of white cardstock using Black Soot Distress Oxide ink. Trim the edges and glue it on a slightly larger piece of white cardstock inked with the same ink. Adhere it on the card front as shown using Darice Adhesive Foam Strips. Arrange and adhere the flower, leaves and swirl on the card front as shown.

Other Products:  Distress Ink (Black Soot ), glue gun, Foam tape, double sided tape, mini mister, Sizzix, Trimmer, Sequins, Pearls, Mudra Stencil, Water Color Paper, Texture Paste, cheesecloth.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

For more tips on creating with the Camelia Carnation collection, watch the tutorial at https://youtu.be/rhk76SAIgWQ.

Instructions: The final card measures 6" x 4.5". Start by scoring and cutting a black cardstock that measures 4.5" x 12", score at 6" and create the card base. Cut a 5.8" x 4.3" white cardstock and distress the sides using black soot distress ink.

For the front card base take a watercolor paper which measures 5.5" x 4.1". Take any stencil of your choice and create a stencil background using some texture paste. Heat set and sprinkle some water to wet the surface. Later on an acrylic block, splash some Black Soot Distress Ink to splash the stenciled background. Once you receive the desired look heat set the surface.

Stamp and die cut some large and small Camelia Carnation by stamping using Vermillion Archival Ink. Color the flowers using Sunflower ink and shape the petals, using 3D basic flower shaping molds. Shade the leaves using the Crushed Olive Distress Ink. Stamp and die cut some filler leaves using the Black Soot and keep them white.

To arrange the bouquet, use some cheese cloth, pearl stamens and leaves, assemble all the shaped flowers and leaves. Tuck in the die cut holiday filigree at the bottom of the flower bouquet. Sprinkle some Black Soot on the white surface.

Other Products: White cardstock, Cream cardstock, very light pink ink.

For more tips on creating with the border dies & foldout cards, watch the tutorial at https://youtu.be/wxX94X84kUo.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

For more tips on creating with the Classic Rose collection, watch the tutorial at https://youtu.be/Z8P070kC3oo.

Instructions: Create a white card base 5 x 7".

Using the Regal Border dies cut 2, one for the top and one for the bottom of the card. Adhere these two together using dries clear adhesive, add D-Dots to the back and place it on the card base in the center. Cut 2 strips of white card stock one 1 1/2" x 6 3/4" and the other one 1 x 6 3/4", add D-Dots and adhere on top of the regal dies.

Cut 2 of the Ornate Border, adhere those 2 together, place D-Dots on the back and adhere to the card. Stamp the sentiment on white with the Rouge ink, use the oval die and cut out. Adhere on top of the Ornate die as shown.

Stamp the leaves on white with the Eden green, color in with the Bamboo Leaves, cut out, shape using the Flower mold, adhere to card placing one on each side.

Stamp the Roses on cream cardstock with the light pink ink, cut out with coordinating die, and use the flower mold to shape the flowers. Assemble the flowers together and adhere to card.

To finish add glitter to the Regal Border, leaves and flowers.

Other Products: White cardstock, white embossing powder, Sap Green Archival ink, Versa mark ink, glitter, micro beads, sunflower glass fragments, handmade flower making paper, vellum paper, Fossilized Amber Distress Oxide, Broken China Distress Oxide

Instructions: Ready top side fold card measures 6" x 8". To prepare the card mats first choose a pattern paper from the designer paper collection and cut a piece measuring 7 7/8" x 5 7/8". Distress the edges of the pattern paper using matching color ink and layer it on the ready card base. Further choose two pattern paper and cut a piece measuring 5.75" x 7.75". Distress the edges of both the paper using same color ink. Mat one piece on the ready card base.

Cut two borders from the white cardstock using Elegant Pocket Accents Die. Also cut the edges of the pattern paper using same die. Apply glitter on the borders and glue the borders on both edge of the pattern paper. Layer it on the card base using dimensional tape. Cut four rings from the white cardstock using eyelet circle & basic small die. Glue the rings on the center of the card.

Stamp sunflower using Sunkissed Fleur stamp on the handmade flower making paper, using Sunflower Yellow Archival ink and die cut with coordinating die. Color the flowers with the same color ink and shape using groove tool. To create flower center, I use sunflower glass fragments. Stamp the Leafy Accents leaf using Library Green Archival ink on white cardstock and cut with coordinating die. Color the leaves using Sap Green and Library Green Archival inks. Shape the leaves using shaping mold. Stamp butterfly on the vellum paper using Versa mark and heat embossed with white embossing powder. Cut with coordinating die. Color the butterfly with Distress Oxide inks.

Arrange the flowers and leaves in the center of the card as shown in the picture. Fill the ring with micro beads. Glue the butterfly as shown in the picture. Cut a sentiment from the same collection. Cut white cardstock using tickets and tags die. Glue the sentiment on it.

Other Products: Mowed Lawn and Picked Raspberry Distress ink, Versamark ink, Ranger Silver Embossing powder, Transparent and Pink Glitter, Gansai Tambi Watercolors, Koi Watrbrush, Watercolor cardstock and pearls.

Instructions: Die cut the bottom of 6" x 6" piece of white cardstock using the die from Ornate Pocket Accents Die. Trim the edges so that the height of the remaining piece is 5 3/4" and the top width is 5". Score this piece at 1/2" from the top.

Take a 5 3/4" x 5 3/4" pattern paper from Sweet Peony Paper Collection and make a 5" wide slit 1/4" from the top. Insert and glue the 1/2" tab from the previous step inside this slit. Adhere this piece to a 6" x 6" piece of white cardstock. Decorate the top of the die cut piece using the same paper collection and Ornate Pocket Accents Die.

Stamp the flowers from Buttons and Blooms Cling Stamp Set using Versamark Ink on watercolor cardstock and heat emboss them using Heat It Craft Tool and White Embossing Powder. Color them using Koi Waterbrush and orange and green colors from Gansai Tambi Watercolors. Die cut them using matching dies from Buttons and Blooms Die. Shape all the flowers using Deluxe Flower Shaping Kit. Add Hot Mama Prills to the flower centers. Use the green flower petals as leaves.

Stamp the Decorative Vase stamp from Merry and Bright Accents Cling Stamp Set using Versamark Ink on white cardstock and heat emboss them using Heat It Craft Tool and Ranger Silver Embossing powder. Cut off the leg of the vase and adhere it to the left side of the die cut flap. Arrange and adhere all the flowers and leaves as shown inside the vase.

Stamp the corset image from Floral Corset Cling Stamp Set using Versamark Ink on watercolor cardstock and heat emboss them using Heat It Craft Tool and Gold Embossing Powder. Color it with Picked Raspberry Distress ink using Stack and Store Daubers and Koi Waterbrush. Die cut it using matching die from Floral Corset Die. Apply glitter to few parts of the corset. Curve and shape it slightly.

Die cut the leaf swirl from white cardstock using the die from Cut Mat Create 2A Die. Ink it with Mowed Lawn Distress ink using Stack and Store Daubers. Shape it using Deluxe Flower Shaping Kit. Cut it strategically and adhere behind the corset die cut we made in last step. Adhere the pinished piece to the card front as shown. Glue some pearls to the die cut to add finishing touch.

Other Products: White cardstock, Big Shot Machine

To see how to shape the hibiscus, watch the video at https://youtu.be/84Re1-gaq1o.

For more tips on creating with the Under The Sea collection, watch the tutorial at https://youtu.be/84Re1-gaq1o.

Instructions: Card size is 6"x 6"(final size). Take pattern paper from the collection and tear the edges and adhere it on the white card base.

Cut two dies from Elegant Pocket Accents Die on white cardstock and adhere it on the card base as seen on the picture.

Stamp some flowers from Tropical Hibiscus Cling Stamp Set with Archival Plum ink onto white cardstock and diecut them with coordinating die. Color them with Cactus Flower and Sunflower Archival ink and shape them using Deluxe flower shaping tool kit.

Stamp leaves from the same stamp set with Archival Library Green ink onto white cardstock and diecut them with coordinating die. Color the leaves with Leaf Green and Library Green inks. Shape leaves.

Stamp one fish from Under The Sea Cling Stamp set onto white cardstock with Archival Plum ink and diecut it with coordinating die. Color it with Zig Clean Color Real Brush Marker using Watercolor Brush.

Adhere everything onto card as pictured. Add prills, pollens and crystal glitter as shown. Add sentiment from the paper collection, using foam tape.

Other Products: Ivory cardstock, ribbon, foam tape, Nuvo Shimmer Brush, Gold 3D Stamp Paint

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

For more tips on creating with the pocket dies, watch the tutorial at https://youtu.be/uDhKUj9AAMo.

Instructions: Finished card size is 6 x 6". Fold Ivory cardstock 12 x 6" in half. Coral color Poppy decorative paper cut to 5 3/4 x 5 3/4" then glued to card base. Cut Ornate Pocket Accents and Album Tags and Accents out of Ivory cardstock. Cut the inside part of Album Tag and Accents out of ivory and coral Poppy paper. Glue the Ornate Pocket Accent to the bottom of card. Stamp sentiment using Rose Madder on Ivory and coral die cut paper and glue to Ivory die cut then glue to card above Ornate Pocket Accent.

Stamp flowers using Carnation Red then sponge with Rose Madder and Carnation Red and die cut. Shape in the Floral Basics Shaping Mold and when dry, brush some gold paint on petals with your finger. Punch center down and glue 2 layers together then add glitter to petals and Black Gala Glitz in the centers. Stamp leaves with Library Green and sponge with Leaf Green and Rose Madder, die cut and shape in mold. Arrange flowers and leaves on top of Ornate Pocket Accent and alongside sentiment tag. Make a double loop sheer ivory bow and glue it to right side of the arrangement to finish.

Other Products: Tim Holtz Distress ink - fired brick, Tim Holtz Oxide ink - fired brick, hot glue, hot glue gun

For more tips on creating with the Tulip Time collection, watch the tutorial at https://youtu.be/rfYMxeNBmJk.

For more tips on creating with the Frame a Card Leafy Borders, watch the tutorial at https://youtu.be/K_1152Kd2Ls.

Instructions: Create card base using white paper and Intricate Swirl Frames. Cut a piece of paper from the Tulip Time Paper Collection using a Intricate Swirl Frames and adhere to the card base using Dries Clear Adhesive. Cut the center of Intricate Swirl Frames Die from paper collection and adhere to the card base using 3D foam tape for dimension.

Stamp the leaves using Leafy Accents Cling Stamp Set on the white paper with StazOn Ink Pad - Olive Green, cut out with the coordinating die, shade use this same ink and shape. Shape leaves using Leafy Accents Shaping Mold. Adhere the flowers and leaves attached using a hot glue gun.

To create flowers Stamp Tulip Time Cling Stamp Set on paper with Tim Holtz Oxide ink - fired brick and cut using the coordinating dies. Color with Tim Holtz Oxide ink - fired brick using sponge. Place the flowers into the Tulip Shaping Mold and sprinkle with water. Put through machine. Wait to dry. Layer the petals together using the hot glue gun making sure to offset them. Use a paper piercer to make a hole in the middle and pull through the green stamens and a little hot glue to the underside of the flower. Shape to closed tulip or open flower. Using paint brush paint ready flower with Designer Dries Clear Adhesive and sprinkle Rajni Chawla's Crystal Clear Glitter. Every stamens cover with green flower tape and put all flowers to bouquet.

Using Vase & Fillers Cling Stamp Set stamp some leaves on paper with StazOn Ink Pad - Olive Green, cut out with the coordinating die, shade using this same ink.

Adhere the flowers and leaves to the card using a hot glue gun. Add to brooch using hot glue gun.

Other Products: White cardstock, water mister, hot glue gun, hot glue, scissors, paper trimmer, diecutting machine

For more tips on creating with the Tulip Time collection, watch the tutorial at https://youtu.be/rfYMxeNBmJk.

Instructions: Cut a piece of white cardstock to 8 1/2 x 5 1/2" size, score and fold at 4 1/4" to create the card base. Cut the card front shown from the Tulip paper. Use from the 2nd largest die from the HCD2-751 Cut Mat Create 2A Die to diecut the center panel from the card front. Lay the card front border onto center of card base as a template, then place the Cut Mat die onto front fold of card and diecut opening. Stamp the Happy Anniversary from the HCPC-3847 Celebrate Love Sentiments Cling Stamp Set onto the center panel. Using from the HCD1-7161 Sweetheart Borders Die, diecut the long border from white cardstock. Trim the border to a 3 1/2" length and attach onto the top backside of card front border. Now attach the center panel through opening onto inside of card. Use double dots to attach the card front border to the card base as pictured.

Stamp medium tulip 1x from HCPC-3858 Tulip Time Cling Stamp Set in Vibrant Fuchsia ink onto white cardstock and diecut with coordinating die. Stamp the small tulip from same stamp set in Tiger Lily ink onto white cardstock and diecut with coordinating die. Stamp small tulip leaves 3x from same stamp set in Fern Green onto white cardstock and diecut with coordinating die. Stamp the tulip border from HCPC-3861 Tulip Cart & Fence Cling Stamp Set in two color tones, Fern Green (leaves) and Vibrant Fuchsia (tulips) onto white cardstock and diecut with coordinating die.

Use the Stack and Store daubers to color the tulips and leaves. For the tulips petals, use Magenta Hue on the outer edges of petals and Tiger Lily in the centers. Use a variation of the same two colors for the tulips of border. For the leaves use Leaf Green ink. Use the HCFB1-472 3D Tulip Shaping Mold to shape tulip petals. Spritz the petals lightly with water before sending the the diecutting machine. Use the shaping stylus to finish shaping the leaves and tulip border. Use hot glue gun to assemble tulips and thread wire stamen from HCS1-458-3 Bright Bead Stamens-Medium through the tulip centers. Thread the tulip stamens through the top of leaf stems and attach with hot glue.

Attach all 3 tulips to the inside of card as shown. Attach the tulip border to the outside of card panel. Use Dries Clear glue along with Crystal glitter to add a touch of sparkle over card as desired.

Other Products: White cardstock, Prisma Color Pencils: 1026; 929; 912; 1054; 1030

Prepare a white card base 5 x 7" and layer it with a piece of the Tulip Time paper 1/4 inch smaller. Add 3 Crystal Drops in the upper right hand corner.

Instructions: Cut one of the Frame A card 1/4 circle from white cardstock adhere to the left side of the card. Cut a piece of white cardstock 2 x 6" and layer it with a piece of the Tulip Time paper, adhere to card. Cut one of the Eyelet Rectangles out of white cardstock and layer it with a piece of the Tulip Time paper, adhere to card as shown.

Stamp the Tulip Bouquet on white with Library Green, color in with the pencils. Stamp the Watering can on white with the Coffee ink, color in with the pencil, cut everything out with the coordinating die, add the bouquet to the back of the watering can, add foam dots and adhere to card. Cut one of the smallest arrows out and adhere under the watering can.

To finish add glitter to the flowers and leaves.

Other Products: Seedless Preserves distress ink pad

Instructions: The finished card measures 6 x 6". Cut white card stock in size 6 x 12". Score at 6 inches on the longer side. Fold to make a top folding card base.

Cut a soft pastel background designer paper 5 3/4 x 5 3/4". Ink the edges with Seedless Preserves distress ink using a dauber. Score the paper at 1/8" interval and adhere to the card base.

Cut a border from Tags and Tickets die set in white card stock. Ink the edges with Seedless Preserves distress ink. Cut a border pattern paper from the paper pad and ink its edges too. Adhere on the border and attach this whole piece on the right edge of the card front.

Cut Eyelet border die cuts in white card stock and distress the edges with Seedless Preserves distress ink. Adhere on the card front as shown.

Cut three oval die cuts and ink its edges. Align the ovals on top of each other, the biggest oval at the bottom and the smallest on top. Attach them using foam tape with their base point touching. Adhere the whole piece onto the left corner.

Stamp the can with tulips image from the Tulip bouquet cling stamp in black ink on white card stock. Colour the image using Zig real brush pens. Cut with coordinating die. Adhere the image on the oval die cuts popping it up using foam dots. Finish the card using a sentiment from the designer paper collection.

Other Products: BigShot Die Cutting Machine, white card stock, pop dots, paper trimmer, scissors, MISTI stamp positioner, heat tool, smooth watercolor paper

For more tips on creating with the Tulip Time collection, watch the tutorial at https://youtu.be/rfYMxeNBmJk.

For more tips on creating with the Floral Fashionista collection, watch the tutorial at https://youtu.be/9V6JOqdQtC8.

Instructions: Create a 4.25" x 5.5" card base from white card stock. Choose a patterned background paper from the Tulip Time Paper Collection for card base mat. Using the coordinating mat die from the Eyelet Rectangles and Basics die and your manual die cutting machine, cut your background mat from the decorative paper.

Using a piece of hydra sponge and ColorBox Pigment Ink - Frost White, dab ink onto several areas along each side of the decorative paper mat. Sprinkle with white embossing powder and set using heat tool.

Using one of the larger heart dies from the Eyelet Hearts Die, cut a heart into the far side of the decorative paper as shown, creating a heart shaped window in which to stamp sentiment. Next, using the same heart die cut, locate the slightly larger eyelet heart die version that coordinates and nest the two together using a low tack tape. Then die cut from white card stock to create an eyelet shaped heart frame. Ink heart frame using Ranger Archival Ink - Magenta Hue. Using a piece of hydra sponge, apply a thin layer of Designer Dries Clear Adhesive to the heart shaped frame and sprinkle with Rajni Chawla's Crystal Clear.

Cut a smaller heart die cut from the Eyelet Hearts Die from white card stock. Ink edges using Ranger Archival Ink - Magenta Hue. Stamp Valentine's Day sentiment onto heart using Ranger Archival Ink - Jet Black. Stamp second sentiment into heart shaped window using Ranger Archival Ink - Jet Black. Adhere glittered heart frame to large die cut heart shaped window.

Stamp one inking of the large tulip blossoms, and two of the tulip filled bucket found in the Tulip Bouquet Die onto smooth watercolor paper using Ranger Archival Ink - Jet Black. Color using Zig Clean Color Real Brush Markers. Using the coordinating dies, die cut all embellishments. Die cut the smaller tulip blossoms from the bouquet in the tulip bucket using the coordinating die. Using Deluxe Flower Shaping Kit, shape small tulips slightly. From the second bucket image, using scissors cut off the bucket portion of the image as you will just use the tulip bouquet from the illustration. Using a dries clear glue, layer the shaped tulips onto the bouquet you've trimmed off of the bucket image.

Stamp two inkings of the small tulip blossom petals from the Tulip Time Cling Stamp Set onto white card stock using Ranger Archival Ink - Plum. Die cut using coordinating die. Using Stack and Store Daubers, ink petals using Ranger Archival Ink - Magenta Hue, and then add Ranger Archival Ink - Vermillion overtop. Shape ever so slightly using Deluxe Flower Shaping Kit. Adhere two petal pieces together to create flower - you will need two.

Stamp one inking of petite florals from the Floral Fashionista Cling Stamp Set onto white card stock first using Ranger Archival Ink - Magenta Hue, and then another stamping in Ranger Archival Ink - Majestic Violet. Ink each of the petals in the corresponding colors they have been stamped in. Die cut using coordinating dies, and then shape using 3D Petite Florals Shaping Mold.

Stamp several leaves from the Small and Large Sweet Peony Cling Stamp Sets onto white card stock using Ranger Archival Ink - Fern Green. Color using Stack and Store Daubers using Ranger Achival Ink - Leaf Green. Die cut using coordinating dies, and shape slightly using Deluxe Flower Shaping Kit.

Position and adhere the larger tulip flowers beside the large heart die cut window as a background accent for behind smaller heart die cut. Next, position and adhere a portion of the smaller tulip bouquet to the backside of the smaller heart die cut so the bouquet flows from the bottom of the heart shape. Using pop dots, adhere small heart to card base as shown. Add tulip flowers and petite florals as shown. Add in peony leaves as fillers where desired.

Using Designer Dries Clear Adhesive and metal tip, apply prills to flower centers and Crystal Ultrafine Transparent Glitter to all flowers and die cut embellishments.

Other Products: Watercolor paper, 080 Violet Zig Clean Color Real Brush Marker, 081 Light Violet Zig Clean Color Real Brush Marker, 026 Light Pink Zig Clean Color Real Brush Marker, Peeled Paint, Tea Die and Vintage Photo Distress Inks, Dimensional Tape

Instructions: Card size is 4 1/4 x 5 1/2". Make card base and cover with one of the card fronts from the Tulip Time paper collection. Add glitter here and there and set aside to dry.

Stamp the flowers and leaves and the wagon with Rich Cocoa Memento Ink onto watercolor paper and use coordination dies to cut out. Color using daubers and the water brush along with Distress Ink and Zig markers.

Slip some of the tulips and leaves down inside the slit on the wagon bed and glue into place. Use other tulips as a foreground for the fence. Add glitter to the flowers and leaves and allow to dry.

Use dimensional tape to adhere the wagon and then glue the other tulips with the dries clear adhesive. Cut out the tag and adhere to the card front with dimensional tape.

Other Products: Cream and Red Cardstock, Florist Tape, Seam Binding Ribbon, Glue Gun, Paper Trimmer, Scissor, Tape, Bigshot, water Spritzer, Butterfly Charm, Spanish Moss, ScorPal, Bling on the Roll, Foam tape

For more tips on creating with the Tulip Time collection, watch the tutorial at https://youtu.be/rfYMxeNBmJk.

Instructions: Card size is 7 1/2 x 5 1/2" with a 1/4" depth. Cut a piece of cream cardstock at 5 1/2 x 7 1/2". Cut a second piece of cream cardstock at 5 1/2 x 8 1/2" score this on the short side on 7 1/2 and 7 3/4. Adhere the first piece of cardstock onto the end flap of the second cardstock. This completes your card base. Take paper from the collection with a green background and cut to 5 1/4 x 7 1/4", ink the edges with Coffee ink. Cut red cardstock to 5 x 7" and glue this on the green paper. Cut a piece from the paper collection to 4 7/8 x 6 7/8". Ink the edges with Coffee ink and glue it on the red cardstock. Add glue to the birds and then sprinkle some Glass Glitter, tap off and let dry. Using the border from the Album Tags and Accent dies and red cardstock, die cut the border twice, lengthwise. Take the remaining paper, and adhere it behind the original border, to create a double-sided border. Adhere this to your decorative paper and fold the edges behind it. Adhere this panel to the card base. Adhere the bling on the roll along the seam of your red border. Die cut a ticket from the paper. Ink the edges with Coffee ink and adhere using 3D foam.

Using Vermillion ink and white cardstock, stamp 12 of the smallest tulips, color them on the front and back with Lady Bug ink. Die cut with coordinating dies. Now stamp the tulip leaves with Fern Green ink and color them with Leaf Green. Die cut with the coordinating die. Now place all the die cuts in the 3D mold, spray them lightly with water, put the lid on and run it through the machine. Adhere 2 flowers offset on top of each other, make a hole in the center and pull 1 stamen through it. Take your florist tape and run it over the wire of the stamens. Glue the leaves on the stamens.

Using Fern Green ink and white cardstock, stamp the tulip vase fillers and color them with Leaf Green ink. Die cut with the coordinating dies, on the tiny Hyacinths you can glue some prills and let this dry. Make a nice bouquet with all the flowers and fillers and place this on the top of the card. Add moss, a bow made from seam binding ribbon and a charm to finish it. To see all the fun things on the inside of this card, please visit my blog.

Other Products: Wood Box, Kraft Knife, Pierce Tool, Arteza Pens, Langton Watercolor Paper, Barn Door Distress ink

Instructions: Take your patterned paper and kraft knife and cover your wood box. Use the paper from Tulip Time collection that has the sky background, for the inside of the box. Once you are done covering your box use your kraft knife to cut any missed edges. -

Next stamp/diecut your fence and tulip border from Tulip Cart & Fence stamp set in Stazon black ink onto watercolor paper. Color in your images using the Arteza watercolor pens. When complete, diecut the images with coordinating dies. Layer images on foam to give it added dimension.

Next stamp the holly branch with small cardinal from Festive Holly & Cardinals set in Colorbox Dark Brown ink onto watercolor paper and diecut with coordinating die. Cut the cardinal from holly branch and color it by sponging on some Barn Door Distress Ink and Archival Sunflower on the beak. Cut a sentiment from the paper collection. Attach everything onto front of box as shown.

Other Products: Cardstock- White, Stampin' Up Ink (Early Espresso), Chameleon Pens (Apple Green, Olive, Peony Pink, Bubblegum, Warm Sunset, Summer Sun, Vermillion, Sky Blue, Red Coral), Scrapbook Adhesives by 3L (Dual Tip Glue Pen, Adhesive Dots Mini and Medium), Heidi Swapp Misters (Mustard, Primrose)

For more tips on creating with the Tulip Time collection, watch the tutorial at https://youtu.be/rfYMxeNBmJk.

Instructions: Depending on the size of your round mini frame. Choose the coordinating circle die and cut the background from light yellow patterned paper. Find and cut out the "You Brighten My World" sentiment and set aside for now.

Stamp 2 sets of each size of the Tulip Time images and leaves onto white cardstock using dark brown ink (Early Espresso). Die cut and then start adding color using Chameleon Pens. Add color to one set in pink (Peony Pink, Bubblegum) and the other set in yellow (Warm Sunset, Summer Sun). Add color to the leaves using two tones of green (Apple Green, Olive). Shape the flowers using the 3D Tulip Shaping Mold.

Stamp and die cut 1 set of the single stem tulip grouping onto white cardstock using dark brown ink. Stamp 2 of the small leafy stems from the fillers using dark brown ink onto white cardstock. Add color to these fillers using the Sky Blue Chameleon Pen. Add color to the tulip stems using the same greens as before for the stems, and 2 tones of red/coral for the blooms (Vermillion, Red Coral). Shape all of the leaves and blooms.

Mist the back of the yellow and pink tulips using coordinating misters (Heidi Swapp Shimmer Mister- Mustard, Primrose). Further shape and assemble the flowers. Add stamen using a liquid adhesive. Let dry. Add the sentiment slightly bowed, to the frame. Then add the 3D Tulips using adhesive dots. Then start adding the fillers and leaves around them. Add some of the smaller tulip stems using mini adhesive dots.

Other Products: London Gray Memento, white card stock, yellow card stock, ribbon, butterfly punches, Copic Markers: YG03, YG17, YG67, Y11, Y15, Y35, V01, V12, V15, RV10, RV02, RV55, E53, E31, E33, E35, C1, C3, BOO, B02, B04, E11, Mustard Distress Ink, foam tape

For more tips on creating with the pocket dies, watch the tutorial at https://youtu.be/uDhKUj9AAMo.

For more tips on creating with the Tulip Time collection, watch the tutorial at https://youtu.be/rfYMxeNBmJk.

Instructions: Card size: 6 x 6". Cut Ornate Pocket Accents and the Decorative Pocket Accents out of white card stock. Cut decorative light yellow paper from Tulip Time paper collection to 5 1/2 x 5 1/2" and cut a yellow card stock 5 3/4 X 5 3/4". Cut 1 corner out of white and a shortened sentiment label out of white as well. Glue yellow paper to yellow card stock then glue Ornate Pocket Accent to the top and measure where the Decorative Pocket Accent will go, draw a line in the slit, remove and use the slot die to cut through both yellow paper and yellow and stock. Glue the Petite Pocket Accent to the bottom of Ornament Pocket accent forming a triangle in the center (you might want to add decorative paper for that area before gluing to make it easier, cut away any extra). Glue yellow card stock to card base but make sure you leave pocket open to insert tag.

Cut large tag mat out of yellow card stock and tag out of decorative paper, something to go with the fence and cart. Cut small circle tag out of white and edge with Buttercup. Stamp "I Miss you" on the round tag and "I'm thinking of you" on the shortened Tickets and Tags Die using Mustard Seed Distress Ink. Glue the round tag onto large tag. Glue the tickets and Tags die onto card front on left side and glue the corner in the right bottom corner.

Stamp cart with Rich Cocoa Memento, fence, flower border, and birds with London gray and stamp the tulip blossoms with Majestic Violet and Buttercup, stamp leaves with Fern Green. Sponge leaves with Leaf Green, sponge blossoms with Majestic Violet and Buttercup. Die cut everything. Color cart, fence, birds and flower border with Copic Markers. Add Ultrafine glitter to flower border and cut to fit cart, put the rest along the fence. Add glitter to blossoms in background paper. Glue birds to fence post and up in tree. Punch tiny butterflies out of yellow card stock and glue to flowers.

Run the blossoms through die cutting machine in the shaping mold after misting and let dry. Punch the centers down with stylist and glue 2 blossoms together to form each flower. Make a small bouquet, cutting off leaves and adding them back in where necessary. Glue a small yellow bow to the bottom of bouquet. Glue bouquet to bottom right between sentiment and corner. Glitter flowers. Punch trio of butterflies out of yellow card stock and glue to card base. Glitter butterfly wings.

Other Products: White card, black card, versamark, white embossing powder, foam pads, hot glue, black ink, clear embossing powder, Lime burst shimmer shaker, sun yellow pixie powder, transparent glitter, kuretake clean colours:- dark gray, yellow, may green, & deep green, water brush, nuvo gunmetal grey embellishment mousse, aquamarine metallic wax

Instructions: Score a 5.75" x 11.75" piece of kraft card at 5.75" to create the square card base and cut and adhere a 5" square paper from the pad to the centre of the card base.

Lightly spray a 6" square piece of white card with water and sprinkle the Lime Burst shimmer shaker and the Sun Yellow pixie powder over it. Add more water to create a shimmery background. When dry cut the card to 4" square and mount onto a slightly larger piece of white card. Adhere to the centre of card using foam pads.

Stamp 3 of the tulip bunches onto white card using Versa mark and cover in white embossing powder, remove the excess and heat set. Colour using the kuretake pens and water brush and allow to dry. Die cut and shape with the flower shaping kit.

Stamp the vase in versamark onto black card, cover in white embossing powder, remove excess and heat to set. Tint with the embellishment mousse and the metallic wax and shape with the flower shaping tools.

Glue the vase and tulips into position using hot glue.

Stamp the sentiment in black ink onto some of the waste card and heat emboss with clear embossing powder. Mount onto a slightly larger piece of white card and glue into position using the dries clear glue.

Run the dries clear glue around the edge of the paper border, sprinkle with transparent glitter and remove excess, allow to dry.

Other Products: White cardstock, VersaFine Smokey Gray ink, Stickles Diamond, Glossy Accents, 3mm Yellow Ribbon

Instructions: Using your Tulip vase & Fillers Stamp set, stamp your tulips and leaves using Smokey Gray ink. Color your tulips with your Sunflower ink and your stems and leaves with the Bamboo Leaves ink. Cut with coordinating dies.

Stamp your fillers with Bamboo Leaves ink and cut with coordinating dies. Shape with your Deluxe Flower Shaping Kit. Decorate with stickles.

Cut your white card base 12" x 6". You will use the full sheet of patterned cardstock for this card. Cut the bottom part of your cardstock into 2 mats 5 7/8 x 5 7/8" (these will be your front panel and your back panels). Cut the top of the cardstock into 2 mats 5 7/8" x 5 7/8" (these will be your insert panels). Trim the green decorative borders. Cut into 2 strips 5 7/8" long.

Card assembly - fold your white card base in half. Adhere your front and rear panels. Adhere the green border strip down the left-hand side of the front panel and again down the left-hand side of the rear panel. Adhere your insert mats. Make a bouquet of tulips and fillers and adhere above the bucket. Using 3d adhesive adhere your sentiment. Adhere a small yellow bow above your sentiment. Decorative with stickles as desired. Decorate the dots of the boots with glossy accents or dimensional magic.

Other Products: Card stock, white, green; Prismacolor pencils; craft foam; foam tape; pop dots; bakers twine, green/white; pearls; enamel dot, pink; Wink of Stella, clear

For more tips on creating with the Tulip Time collection, watch the tutorial at https://youtu.be/rfYMxeNBmJk.

For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.

Instructions: Card base: Cut a piece of white card stock 8.5" x 5.5", fold in half with side fold. Cut a piece of green card stock 4" x 5.25". Cut out one of the card panels and add to the green card stock. Cut a piece of craft foam 3 7/8" x 5 1/8", add to back of green card stock and then adhere to card front.

From white card stock, die cut Decorative Pocket Accents die. Stamp flowers, vase and water can with Jet Black on white card stock. Color with Prismacolor pencils and then cut with coordinating dies. Shape flowers with Flower Shaping tools. Arrange and adhere flowers behind vase and can. Add pop dots to back of flowers and then add vase to card. Add watering can with foam tape. Add Wink of Stella to flowers and vase. Stamp sentiment with Jet Black on white card stock and die cut with small Ornamental Tags Die. Add pearls to bottom of tag. Add bakers twine in hole and then add enamel dot. Add to card.

Other Products: Floral Cardstock, Hot Glue Gun, VersaMark, Martha Stewart Onyx Glitter, Sheer Black Ribbon, Misti, Dimensional Tape, Ranger Black Sparkle Embossing Powder, Distress Oxide Ink Pad Black Soot, Bow-It-All 2

For more tips on creating with the Tulip Time collection, watch the tutorial at https://youtu.be/rfYMxeNBmJk.

For more tips on creating with the pocket dies, watch the tutorial at https://youtu.be/uDhKUj9AAMo.

Instructions: Card size is 6 x 6". Score and fold 12 x 6" black cardstock at 6" on the long side to create a 6 x 6" tent fold card base. Cut pink designer paper from the Tulip Time Collection to 5 7/8 x 5 7/8", ink the edges with Distress Oxide Ink - Black Soot. Using the Misti, stamp the sentiment on the pink designer paper using VersaMark, sprinkle with Ranger Black Sparkle Embossing powder and heat set using the heat it tool. Adhere to the card base using dimensional tape. Cut one of the 6 x 6" panels from the paper collection and adhere to the inside of the card using dries clear adhesive.

Diecut two of the Petite Pocket Accents Die from black cardstock. Die cut two of the lace edges using the same die set from black cardstock. Adhere the lace edges to the petite pocket accents. Sponge the diecuts with dries clear adhesive and sprinkle with Onyx glitter and when dry, adhere to the card front as shown.

Stamp the tulips on floral paper using Buttercup, Majestic Violet and Vibrant Fuchsia inks. Color with the same inks and diecut using the coordinating dies. Ink around the edges, color the backs of the petals and place in the tulip mold. Spritz with water and run through the diecutting machine. Press down in the middle of each petal using the stylus from the Deluxe Flower Shaping kit to further shape the flowers. Pierce a hole in the center of each petal and thread the Rock Candy Stamens through. Add some hot glue to the underside to secure. Use two petals to create each flower making sure to offset them.

Stamp the leaves on floral paper using Ranger Olive ink, color using Leaf Green and Olive inks and diecut using the coordinating dies. Shape using the deluxe flower shaping kit. Adhere the flowers to the leaves, sponge with dries clear adhesive, sprinkle with Rajni Chawla's Crystal Clear Glitter and then adhere to the card base using a hot glue gun.

Create a black sheer bow using the Bow-It-All 2 and adhere as shown using a hot glue gun.

Other Products: 7" Metal Tin

For more tips on creating with the Tulip Time collection, watch the tutorial at https://youtu.be/rfYMxeNBmJk.

Instructions: To see more of this tulip tin, click here. Cut a 7 x 12" piece of cottage designer paper from the Tulip Time Paper Collection, cut additional small strip if tin is larger than 12 inches around, adhere to tin. Cut a circle die to fit top of tin from designer paper and adhere.

Stamp and sponge the Large tulips in Buttercup and Lulu Lavender, and Medium tulips in Cantaloupe, and the small tulips in Vibrant Fuchsia from the Tulip Time set onto white cardstock and diecut with corresponding dies. Shape with the 3D Tulip Shaping Mold, add lavender beaded stamens to the centers of the large lavender tulips and pearl yellow stamens to the centers of the large yellow tulips and add glitter all the flowers.

Stamp and sponge leaves from the Tulip Time set in Olive onto white cardstock and cut out with corresponding dies. Stamp the leaves from the Leafy Accents set in Library Green, cut out with corresponding dies. Sponge the leaves with Bamboo Leaves. Shape with 3D Leafy Accents Shaping Mold.

Stamp the fence, cart, wheel, and tulips from the Tulip Cart and Fence set in black onto white cardstock, cut out with the corresponding die and sponge with ink. Stamp hyacinths from the Tulip Vase and Fillers set in black, sponge with ink and cut out with corresponding die. Add glitter to all flowers

Cut out two dies with the Petite Pockets Accents Die in white cardstock, adhere the two together longways to create a lattice and adhere to tin to the right of the cottage, adhere yellow tulips and leaves made with the Leafy accents on top.

Cut out two fancy dies for the sentiment from the Ornament Tags die in magenta designer paper from the Tulip Time Paper Collection and stamp the sentiment from the Just for You Sentiments set in black and cut out with the rectangle die in the Ornament Tags Die.

Cut the tulip row from the Tulip Cart and Fence set in half and layer in the cart, adhere the wheel to the cart with foam tape for dimension and adhere the cart to the right of the lattice created with the Petite Pocket Accents Die. To the right of that, adhere the sentiment on the top and the fence below with hyacinths and medium tulips adhered to the front of the fence, as seen in photo. In front of the cottage adhere hyacinths and small tulips in the cart that is on the designer paper and cut out the Happy Days sentiment from the paper collection and adhere to the front of the cart.

For the top of the tin, adhere the lavender tulips and leaves as seen in photo.

Other Products: Orange Cardstock, Purple Cardstock, Archival Cobalt ink, 3D Foam tape, Pencil colors, hot glue, glue gun

To see how to shape the peony, watch the video at https://youtu.be/L9_MLkvpGPQ.

For more tips on creating with the Floral Fashionista collection, watch the tutorial at https://youtu.be/9V6JOqdQtC8.

Instructions: The finished card measures 6 -1/2 x 6-1/4". Cut orange cardstock 13 x 6-1/4", score at 6-1/2" from the longest side and fold. Cut purple cardstock 6 x 5-3/4" and adhere on top of orange cardstock diagonally as shown with Dries Clear glue. Choose pattern paper from the Floral Fashionista collection and layer on top of purple cardstock.

Die cut Eyelet Oval die from white cardstock and adhere onto left side of the card with 3D foam tape. Stamp corset image from Floral Corset Cling Stamp Set onto white cardstock with Archival Ink Jet Black and diecut with coordinating dies. Color the corset image using pencil colors.

For the blue peony flowers, stamp peonies and leaves from Large and Small Sweet Peony Cling Stamp Sets onto white cardstock with Archival ink Cobalt and die cut using coordinating die. Color the petals using Archival ink Cobalt. Shape the flowers and leaves using golf tools.

For the small flowers, stamp petals from the Floral Fashionista Stamp Set with Archival Plum ink onto white cardstock and color using same ink. Die cut using coordinating die. Shape the flowers using 3D Petite Florals Shaping Mold.

Stamp leaves from Leafy Accents Cling Stamp Set onto white cardstock using Archival ink Library Green and die cut using coordinating die. Color the leaves using Archival ink - Olive and Colorbox ink Olive Pastel. Shape the leaves using Leafy Accents Shaping Mold.

Thread stamens through the peony flowers and attach with hot glue. Assemble all the flowers. Die cut tag out of pattern paper using Ornamental Tags Die. Once all the elements are ready, arrange them onto card as shown.

Other Products: Distress inks, Stormy Sky and Pumice Stone, Smooth white cardstock, Die-cutting Machine, Score Board, Distress Oxide Rusty Hinge, Hot Glue Staedtler Pencils.

For more tips on creating with the Tulip Time collection, watch the tutorial at https://youtu.be/rfYMxeNBmJk.

Instructions: To see more of this tissue box, click here. Using Album Tags and Accents Die and thick back cover of the designer paper pack, cut 4 pieces of tags and glue them together to create 2 sets of thick tags. Choose the paper from the designer paper collection and cover both the sides of the tags.

To create a box, measuring 3" x 2 " with the height of 2 1/2", take a smooth kraft card stock measuring 6 1/2" x 8 1/2". To the longer side score at 2 1/2" first, then rotate the paper and again score at 2 1/2". You will be left with 3" in the center which will make the length of the box. On the shorter side, score at 2 1/2" first, rotate the paper and again score at 2 1/2". You are left with 1 1/2" in the center which will make the width of the box. Now on the same side score at 2" till 2 1/2" and then again score from 4" till the end. This will make the half inch hinge when folded. Repeat the process on another side. For the construction of the box, do refer to the picture shared in my post on my blog. Once the box is complete cover all the sides by pasting designer paper on all sides. Glue the box between 2 tags as shown using red tacky tape.

To create vellum Tulips, stamp the multiple tulip images from Tulip Time Cling Stamp Set with Frosted white Color Box ink on Vellum sheet and sprinkle white heat embossing powder. Dust extras and heat set the images using a heat tool. Cut the images using its coordinating dies and paint them using distress oxide, Rusty Hinge. Shape the flowers on the back of a paintbrush and add rock candy stamens to the centers using hot glue. Make a small bouquet of tulips as shown in the picture. Also, white heat emboss the butterflies from Butterfly Dreams Collection the same way we did with Tulips. Color them using Distress Oxides.

The vase images from the Tulip Bouquet Cling Stamp Set is stamped on white cardstock using black archival ink and then cut using its coordinating die. The 2 vases are then colored using Staedtler pencils

The fence from Tulip Cart & Fence Stamp set is stamped with black archival ink, colored using distress inks Pumice Stone and Stormy Sky and cut using its coordinating die. Extra die cuts are stacked behind the painted image to make it sturdier. Also, the filler images from Rain Boots and Blossoms Cling Stamp Set are stamped with Olive green and cut with its coordinating dies. These are then colored using Leaf Green Archival Ink and shaped using Deluxe Shaping Kit.

Once all the elements are ready, glue fences on both the sides and assemble a small bouquet of tulips on the fence on one side and vellum butterfly on the other side. Complete the project by adding another butterfly near the vase and add the sentiment.

Other Products: White cardstock, Big Shot Machine

For more tips on creating with the Under The Sea collection, watch the tutorial at https://youtu.be/84Re1-gaq1o.

Instructions: Card size is 5 x 7" (final size). Take pattern paper from the Under the Sea collection and tear the edges and adhere it on the white card base.

Cut two Eyelet Lace Frames Die on white cardstock and adhere it on the card. Cut one Eyelet Circle Die and adhere it at the centre of the card with foam tape.

Stamp two shell images from Coral Reef Collage Cling Stamp set with archival ink-plum and cut it with coordinating die and color them with Zig Clean Color Real Brush Markers using Color In Watercolor Brush. Arrange them as seen on the picture.

Stamp some flowers, leaves, and small shells from Tropical Hibiscus Cling Stamp Set with archival ink and cut them with coordinating die. Color them with archival ink and shape them using Deluxe flower shaping tool kit. Add prills and crystal glitter as seen on the picture. Arrange them at the centre of the card.

Add sentiment from the paper collection, using foam tape as seen on the picture.

Other Products: Strathmore Bristol Smooth Cardstock, Creative Expressions Brunswick Green

For more tips on creating with the Woodsy Wonderland collection, watch the tutorial at https://youtu.be/TldMdgGbYkQ.

For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.

Instructions: Cut a piece of cream cardstock 12" x 7", score at 6" along the long side and fold to create a 6" x 7" card base. Die cut the lace edges from the HCD1-7202 Album Tags & Accents Die out of the Brunswick Green cardstock and adhere to the top and side edges. Cut a 6" x 6" patterned paper and adhere to the front of the card.

Cut a small landscape image 3" x 4 1/4" and adhere to the back of the shadow box. Assemble the box and cut a piece of striped paper 3 1/2" x 4 3/4". Trim the edges by 1/2" each side and adhere to the sides of the shadow box. Die cut the centre of the paper using the smaller rectangle die from the HCD2-750 Cut Mat Create 1B Die set and adhere to the front of the box. Die cut a skunk from the paper and adhere to the inside of the box with foam tape. Add Lion's Mane glitter to the images and dot around the sky with Dries Clear glue. Adhere slightly to the left of centre on the base card. Add Lion's Mane glitter around the inner edge of the shadow box opening with Dries Clear glue.

Stamp the tree image from the HCPC-3766 Woodsy Treescape Stamp set, in Jet Black ink on Bristol Smooth cardstock. Colour with the Zig Clean Colour Brush Markers and die cut with the coordinating die. Shape lightly and adhere to left side of the shadow box. Add Lion's Mane glitter to the tree with Dries Clear glue.

Stamp the large tree images from the HCPC-3766 Woodsy Treescape Stamp set, in Jet Black ink on Bristol Smooth cardstock. Colour with the Zig Clean Colour Brush Markers and die cut with the coordinating die. Die cut a plain image from white cardstock and adhere one image to it before adding to the right side of the shadow box. Add other trees to the right of the shadow box as shown. Stamp the leaves from HCPC-3766 Woodsy Treescape Stamp set in Jet Black ink on Bristol Smooth cardstock. Colour with the Zig Clean Colour Brush Markers and die cut with the coordinating die. Shape and adhere to the top of the trees as shown.

Stamp the flower images from the HCPC-3767 Woodsy Wonderland Stamp set, in Jet Black ink on Bristol Smooth cardstock. Colour with the Zig Clean Colour Brush Markers and die cut with the coordinating die. Trim the lavenders and adhere to the left side of the shadow box. Add purple flowers to the base of the trees on the right, yellow flowers to the right on the shadow box and some yellow/orange flowers to the left of the shadow box. Add Crystal Ultrafine to the purple flowers and Lion's Mane glitter to the yellow and orange flowers.

Stamp the rock and log images from the HCPC-3767 Woodsy Wonderland Stamp set, in Jet Black ink on Bristol Smooth cardstock. Colour with the Zig Clean Colour Brush Markers and die cut with the coordinating die. Die cut another die from plain cardstock and adhere the painted image to the plain die to create some strength. Adhere the image to the front of the shadow box as shown. Trim the leaves from the log image and adhere at the base of the trees on the right. Add Lion's Mane glitter to the leaves and around the rocks with Dries Clear glue.

Stamp the rabbit, fox, squirrel, birds and cardinals from the HCPC-3768 Woodsy Critters Stamp set on Bristol Smooth cardstock and colour in with Zig Clean Colour Brush markers and die cut with the coordinating dies. Shape the animals and birds and adhere to the card as shown.

Die cut the outer die from the HCD1-7203 Ornamental Tags die in Brunswick Green cardstock. Die cut the inner decorative die from the same set in Brunswick Green cardstock and adhere to the outer die cut. Die cut the 'A Gift For You' sentiment from the patterned paper and adhere to the tag. Adhere the tag to the top as shown.

Dot Dries Clear glue around the card and add some Lion's Mane glitter for some sparkle.