Other Products: Cut File, White Card Stock, Versamark, Silver Embossing Powder, Tattered Rose Distress Embossing Powder, Tattered Rose Distress Ink, Peeled Paint Distress Ink, Stickles, Ribbon from my stash and die cutting machine.

Watch this video for tip on how to shape the roses here.

Instructions:  Start by cutting the pieces out of white card stock and assembling according to the directions. For added strength I cut the sides 4 times per side and glued them together. Once your glue has cured, layer in a piece of paper from the Classic Wedding Paper Collection to finish off the inside. Diecut a medallion on orange designer paper from Classic Wedding Collection. Diecut the shadow frame on white cardstock and adhere orange medallion directly onto shadow. Adhere to the back of wagon. I slightly curved this for some added dimension. 

The Classic Rose flowers were stamped on white card stock with Versamark and heat embossed with Tattered Rose distress embossing powder before die cutting with the matching die and distressing with Tattered Rose Distress Ink and finally shaping with the Flower Shaping tool.  The leaves were stamped on white card stock with Northern Pine and die cut with the matching die and distressing with Peeled Paint Distress Ink and finally shaping with the Flower Shaping tool. Stamp 2 bell garlands on white card stock with Versamark and heat embossed with silver embossing powder. Die cut with the matching die and coloring with Tattered Rose Distress Ink. Attach one on each side of wagon with dries clear glue. Add accented with Crystal Stickles.

Other Products: White Cardstock, Dimensional Tape, White Lace, Vintage Photo Distress Ink, Hot glue gun

You can watch a video on how to make the Classic Rose here.

Instructions: My card size is 5 1/2 x 5 1/2".  Make card base and cover with a piece of the paper collection. Hot glue a piece of white lace along the bottom of the card. I used some glue on a sponge and dabbed around the edges of my card and then used the Frosting Powder to add some interest to the card.

Stamp, diecut, color and shape the roses. (I stamped the roses using Rich Cocoa Memento Ink and colored them in New Sprout and Bamboo Leaves ink)  Use glue and the Frosting Powder on the edges of the petals for a very encrusted look.  

Next I stamped, diecut and colored the dove and added Crystal Clear to the doves plumes (I used Tuxedo Black Memento Ink to stamp the dove and New Sprout to color). I used a piece of the dimensional tape to attach it to the bottom of the card.

Next stamp and diecut the Classic Wedding Roses stamp large heart using Rich Cocoa Memento Ink and use the dove blender pen to color using Memento inks (New Sprout, Bamboo Leaves, Rich Cocoa). Adhere it to the front of the card and then glue your roses around the die cut.  Your card is ready to go.

Other Products: White Cardstock, Silver Foil Cardstock, Green Cardstock, Ranger Distress Ink Pads – Carved Pumpkin and Peeled Paint, Nuvo Crystal Drops – Ivory Seashell,  Scrapbook Adhesive by 3L - Thin 3D Foam Squares and EZ Runner Grand, Versamark, Silver Embossing Powder, Heat Gun, Spellbinders Platinum Die Cutting Machine.

Watch this video on how to make the Classic Rose here.

Instructions: Create a 6 1/2" x 6 1/2" card base from white cardstock. Cut a 6 1/4" x 6 1/4" foil silver square, adhere to card with tape runner. Cut out a 6" x 6" card front from Classic Wedding Paper Collection, adhere to card. 

Die cut 2 decorative medallions from silver foil cardstock. Adhere to center of card using thin 3D foam squares. 

Stamp Classic Wedding Bells with Versamark and silver embossing powder onto white cardstock, heat set with embossing tool. Die cut with coordinating die and then color with distress inks and daubers (Carved Pumpkin, Peeled Paint). Adhere wedding bells to center of card using 3D foam squares.

Stamp multiple Cascading Fuchsia flowers with Carved Pumpkin distress ink onto white cardstock. Die cut with coordinating dies and then color edges with same distress ink. Shape flowers with Deluxe Flower Shaping kit to create roses. Follow the same technique as the video above to create these roses. Adhere roses to card using thin foam squares. Embellish center of small flowers with Crystal Drops.  

Die cut leaves from green cardstock using small vine from Cut Mat Create 1B die collection, adhere to card under flowers.

Other Products: Card Stock: Crafters Companion Whit-hint of gold 300gm, Peach card stock, Ranger: Archival ink: jet black and Sap green, Distress ink: Victorian velvet and aged mahogany Other: Heat Gun, Water Mister, Inking tool, Bone folder, Paper distressing tool, Scissors, Ruler, Hot glue gun, Versa-mark, Double sided Tape, 3d Double Sided Foam Tape, Misti, Clear crackle medium

To see tips on shaping the Classic Rose, watch this tutorial.

Instructions: This card when completed fits into an envelope measuring 9 1/2" x 7 1/2" (24.1 cm x 19 cm). To make the card base take the A4 card stock make 2 folds, being 2 1/4" (6 cm) each to form the foot of the card. Fold this to a hill and valley fold. Cut the card front base at 5 3/5" x 6 3/4" (14.2 cm x 17.1 cm) The card slider at 2 5/8" x 4 1/2" (6.7 cm x 11.5 cm) The slider stop at 1" x 3 3/4" (9.5 cm x 3 cm). Visit Sussipoppins.blogspot.com to find a photo tutorial on how to put this card together

Taking the peach cardstock cut this a little smaller than the card front base, the designer paper for the card front is distressed with a paper distresser. When preparing with double sided tape, apply only to three sides. Leaving the top open so the slider can slip into this opening. 

Find the desired designer paper from the paper collection and cut matting for the card base measurements. This is also cut a little smaller than the cardstock. Apply double sided tape then adhere to the card base pieces. Adhere the card front to the centre of the card foot. Centre then adhere the slider to the top edge of the card background. Slip the slider into the card front opening. This makes the card base complete, now  continue decorating your card.

Taking the white card stock and the large rose heart stamp, stamp once with the Sap green ink and the other with the gold embossing powder. Die cut using both the outer and inside die pieces. Find the sentiment, using a scrap of designer paper stamp with gold embossing powder. Trim edges so you will have a banner that will fit into the heart centre. 

Stamp three leaf swirls using the Sap green ink, apply a little ink to the heart of the leaves using the daubers. Make the roses and rose buds. Stamp the roses in black ink on white paper and diecut using coordinating die. Color using Stack and Store Daubers and Distress inks, Victorian Velvet and Aged Mahogany. Shape flowers and leaves as desired. 

Adhere the hearts with 3d foam tape or double dots. Slip the sentiment banner into the heart centre and secure. Arrange and adhere a leaf swirl to each side of the heart, adhere the roses using as filler the extra leaf swirl, trimming as you go. Apply crackle medium to the roses then the crystal powder. Heat to activate the mediums.

Other Products: White cardstock, Black cardstock, Pearl halves, Lace, ribbon, Viva Perlen-Pen, M.S. Border Punch, 3-M Foam Tape, Adirondack Salmon and Peach Bellini inks, Copic E95,C0,C01,C02,C03,C05,C07,C09

See how to shape the Sunrise Lily here.

Instructions: Card size is 5 7/8 x 6", I chose a peach colored paper from Classic Wedding Collection and cut it 5 7/8 x 5 7/8" then used a border punch to cut a border on the left side only. I cut the Decorative Medallion die from white linen and glued it to the left side about 1 1/2" from the bordered edge and wrap the lace (about 2 1/2" width) around the left side, secure in back. Use a piece of floss to gather and tie the middle portion of lace.  

Stamp and die cut 1 large and two smaller lilies and leaves with black ink. Diecut stamens from black cardstock. Sponge the lilies with Rose Coral ink and use Cantaloupe ink on the edges. Sponge the leaves with Bamboo Leaves ink. Shape the flowers and leaves using the Deluxe Flower Shaping Kit. Fashion flowers with stamen which have been glued and dipped in yellow/orange Prills. Add the large lily to the center of the lace and cover the roses on the right side of the card with the two smaller lilies. 

Stamp, die cut and form the tiny flowers from Wildwood Floral using orange ink, shape and add pearls to the center of each and glue to card around the lilies on the right side. Add peach ribbon to both sides. Stamp, die cut and color Bride and Groom then pop up with foam tape.  

Add Liquid Pearls Nuvo and Perlen-Pen dots to Bride bouquet. Diecut a sentiment "ticket" from the Classic Wedding Collection designer paper using ticket die from Luggage and tags die. Attach to left side under large Sunrise Lily (I punched a hole and attached with white floss) Glue to a 5 7/8 x 6" white folded card.

Other Products: Apricot-pink cardstock. 65 lb. white cardstock, olive green cardstock, X-Press It Blending Cardstock, Copic Alcohol Ink Markers, Abandoned Coral Distress Ink, Misty, Copic Alcohol Ink Markers (E000, E11, E21, C0, C1, C3, C5,  C7, B0000, B000, B00, B21, B92, G40, G45, RV81, RV85), double sided tape, heat tool, glue gun, Crackle Paint, mini mister

Instructions: Cut card  base from heavy white cardstock to create a 5 1/2 x 5 1/2 inch top folding card. Cut the base layer from apricot-pink cardstock at 5 1/4 x 5 1/4 inches. Cut  the designer paper from the Classic Wedding Paper Collection at 5 x 5 inches. Sponge the edges of the paper with Abandoned Coral Distress Ink. Adhere the layers with double sided tape. 

Stamp the bride and groom image from the Classic Wedding Bells Stamp set using Desert Sand Dye and X-Press It Blending Cardstock. You can use any Copic compatible paper. Color the image with the following Copic Marker color combo (Skin- E000, E11, E21, Hair and Suit - C0, C1, C3, C5, C7, Wedding Gown and veil - B0000, B000, B00, B21, B92, Bouquet - G40, G45, RV81, RV85). Die cut with the coordinating die. Cut  three or four additional images with the die from dark green cardstock. Adhere the layers using Designer Dries Clear Adhesive, this will provide dimension and strength to the focal image. Apply a thin coat of Dries Clear Adhesive to the image and lightly sprinkle with Crystal Clear Glitter. 

Diecut the Medallion from light blue cardstock and the coordinating mat from the green cardstock. Lightly dot the medallion with Dries Clear Adhesive and apply to the dark green medallion mat. Adhere the medallion to the card base as shown.

Stamp Classic Roses image on light weight white cardstock using white embossing powder. Heat set the flowers. Stamp the leaves with the Classic Rose Stamp set using Olive Green ink. Die cut with the coordinating die sets. Sponge the flowers with Abandoned Coral Distress Ink. Sponge the leaves with Olive Green and Abandoned Coral ink. Die cut the roses and leaves. Shape the flowers and leaves with the Deluxe Flower Shaping Kit. Allow to dry and  adhere the layers. You can view a wonderful tutorial on flower shaping dimensional roses here. Lightly brush the flower petals with Crackle Paint and sprinkle with Frosting Powder and heat set. 

Apply Dries Clear Adhesive to the card base as shown and sprinkle Gold Gala Glitz and allow to dry. Apply dimensional foam dots to the focal image and adhere over the Gold Gala Glitz. Arrange and adhere the leaves and flowers with a glue gun.

Other Products: Soft Matte Gel, heat gun, twine, beads, dimensional adhesive, Glue Gun, Glossy Accent, scissors, heat tool, Distress inks, Pine needle, Barn Door, Vintage Photo, Archival Black, Saffron,

Instructions: Cut coral cardstock at 6" x 12". Sore and fold at 6". Cut a designer paper at 5 1/2" x 5 1/2". Cut another designer paper to 5" x 5". Cut another at 4 1/2" x 4 1/2" and diecut using plain border die. Distress all the designer paper edges.

Take the Fleur Basic Border Die and die cut from a white card stock to match your designer paper cut with plain border die. Adhere border under designer panel using dries clear glue. Ink edges with Lime Pastel ink. Diecut 2 tags from the paper collection and distress. Adhere all the layers and attach onto card Base.

For the flowers Stamp multiple set of dogwoods from the stamp using a white cardstock using Saffron ink and diecut. 

Stamp Leaves using Pine Needle ink and diecut with coordinating die. Color Leaves with Lime Pastel Ink. Shape both flowers and leaves and attach onto twine as desired using hot glue adding pollens where needed. Apply drops of Dries Clear Glue to center of flowers and add prills.

For the sentiment cut a pre made sentiment from the paper collection and attach using dimensional adhesive. Add Crystal Clear to the flowers and along sentiment.

Other Products: Archival Ink Plum, Tea Rose, Magenta Hue, Library Green, Fern Green, Olive Green, Black, Distress Ink Rusty Hinge, Smooth Cardstock, Spellbinders Classic Circle die, Zig Clean Clear Brush Markers

For tips on shaping roses, watch the tutorial here.

Instructions: The ready gatefold card measures 6” x 7”. Take a smooth white cardstock measuring 12” x 7” and score at 3” and 9” on the longer side. Crease the score lines to form a gatefold card base. Now choose patterned paper from the coordinating paper collection and cut all front and inside panels, 1/4” smaller than the card panels. Distress the edges using distress inks and paste them using an adhesive that dries clear.

For the flowers, images are stamped with archival ink Plum and colored using Tea Rose and Magenta Hue. The leaves are stamped using Library green ink and painted using Olive and Fern Green. To shape the flowers and leaves, follow Emma Lou's video. 

For the front panel, diecut 2 Botanic Window Frames and adhere together for a sturdier piece and distress using Rusty Hinge ink. Apply adhesive that dries clear and sprinkle Frosting Powder. Heat set if you require the frosty look. The inside panel of the window is cut using gray patterned paper and layered in the center using foam tape.

The wedding couple and wedding bells are stamped with black archival ink and colored using Zig Clean Clear Brush Markers. Both the images are layered using foam tapes.

Diecut 3 Medallions onto white cardstock using medallion die. The window is then layered on the 2 Decorative Medallion die cuts. Assemble a rose bouquet on the right-hand side, add flower pollens as shown using hot glue.

The sentiment is stamped with black archival on light colored pattern paper and then fussy cut using sharp scissors. The inside of the gatefold card has a decorative pocket which is created using a rectangular piece of Decorative Medallion die. Diecut meddallion frame on aqua cardstock and glue white medallion on top and attach on inside of card. Add fussy cut sentiment and apply Crystal Clear on flowers and leaves.

Other Products: Cardstock (white), Beads, Pearls, CTMH (watercolour paints, Ink- Chocolate), Scrapbook Adhesives by 3L (EZ Runner Grand, Extreme Double Sided Tape, Glue Pen, 3D Foam Squares, Adhesive Dots), Water Brush, Lace

Instructions: Find and cut out the 6x6" card front from the Classic Wedding paper collection. Adhere a piece of 3" wide lace across the front of the card. Adhere to a 6x6" card base. Cut a strip of the green polka dot patterned paper that is 1x6" and mat it in the pink patterned paper. Adhere on top of the lace using Extreme Double Sided Tape. Cut a piece of pink patterned paper that is 4x4" and adhere to the card using 3D foam squares. Cut a piece of cream patterned paper that is 3.5 x 3.5" and adhere to the card again using 3D foam squares.

Stamp and die cut 1 of the large heart wreath using Chocolate ink. Stamp and die cut 1 set of the medium Classic Rose flowers in Chocolate ink. I added colour to all of my images using watercolour paints and a water brush. Shape and assemble the flowers. I added beads to the middles of the flowers using 3D Crystal Lacquer. Let dry. Using a glue pen add glue to the tips of the flowers and sprinkle on Crystal Clear glitter. Let dry. 

Adhere the rose wreath to the front of the card using 3D foam squares. Add the small layered rose to the top left hand corner of the wreath using adhesive dots. Add pearls to the 4 corners of the cream patterned paper. Find and cut out the “Happily Ever After” sentiment and flag the right hand side of the banner.  Adhere the left hand side just slightly under the wreath, and using an adhesive dot attach the other end to the right hand side of the wreath bowing slightly.

Other Products: White Card Stock, PrismaColor pencils 1097;928;929;949; piece of chip board

To see how to shape the Classic Rose, watch the tutorial here.

Instructions: Begin with the Flipfold insert and cover all 3 sections with Classic Wedding Paper leaving 1/8 to 1/4"  around the edges. Use the stamp positioner and Dark Brown ink and stamp the sentiment on the second layer of the card. Stamp the Wedding Bells on white card stock with the Dark Brown ink, color with the pencils and diecut. Diecut another bell out of chip board,(I used a ceral box) and layer the one you colored on top. Stamp the Leaves on white card stock and color with the Bamboo Leaves, cut out and adhere to the first layer of the card. Stamp the Roses on white card stock with the Frost White color box and emboss with the Aged Ivory embossing powder. Heat Set. Lightly color over top with the daubers the Pearlescent Orchid ink. Diecut, shape and adhere on top of the leaves. To finish the card apply glitter to the flowers, leaves, bell and ribbon as shown.

Other Products: ColorBox Chalk Ink-Gray Whale and Fawn; Brilliance Ink; VersaMagic Chalk Ink-Pixie Dust and Pink Petunia; Want2Scrap 72 Count-Sage Green Pearls; Want2Scrap 72 Count-Pink Pearls; Art Glitter Ultrafine Transparent Glitter-Antique White and Angel Dust; Art Glitter Ultrafine Opaque Glitter-R2

To see how to shape the Classic Rose, watch the tutorial here.

Instructions: Begin by creating a 6" x 6" card out of White Cardstock. Next cut a 6" x 6" card front from the Classic Wedding Paper Collection and die cut the center using the Cut Mat Create 2B Die. Sponge edge of Classic Wedding card front with Olive Grove Memento Ink and then adhere to the card base with pop dots. Next adhere die cut square directly to the card base with Dries Clear Adhesive. 

On White Cardstock with Tuxedo Black Ink stamp the rose petals using the Classic Rose Cling Stamp Set, stamp the couple image from the Wedding Bells Stamp Set and stamp the small heart from the Classic Wedding Roses Cling Stamp Set. Die cut all with coordinating dies. Using Stack and Store Daubers, Fantastix and Tombow Blender as needed to color small floral heart, color leaves with Olive Grove and Pistachio Memento Ink and then add Pearlescent Olive Brilliance Ink and color the roses and the rose petals with Pixie Dust VersaMagic Chalk Ink and then add Pink Petunia VersaMagic Chalk Ink to the centers of the petals. Color the couple by using Gray Whale o the suit and Fawn Chalk Ink on the color and pants, the groom's hair with Dark Brown Chalk Ink and skin with Cantaloupe Memento Ink. Shade the brides gown, hair and veil lightly with Cantaloupe Ink. Finally color the bouquet with Pixie Dust and Pink Petunia VersaMagic Chalk Ink and New Sprout Memento Ink. 

Using white card stock diecut using Decorative Medallion Die and using Dries Clear Adhesive with the fine metal tip add Antique White Glitter. Shape floral heart, bridal couple image and roses petals with the Deluxe Flower Shaping Kit. Adhere all to card, cutting floral heart apart as needed, with Dries Clear Adhesive and pop dots as needed. With Dries Clear Adhesive add Antique White Glitter to the die cut roses and to the roses on the heart and the bouquet and the ribbon on the design paper, add Lichen Glitter to the leaves, add Angel Dust Glitter to the bride and add R2 Holographic Silver Glitter to the diamond on the ring. Finally, adhere the Sage Green Pearls and Pink Pearls as shown.

Other Products: White Cardstock, London Fox Memento Ink, Chrome Yellow Archival Ink, Scor-Tape, Silver Wedding Bands, Hot Glue Gun, Seam Binding

Instructions: My album size is 4 1/2 x 8 1/2". Cover the insert inside and outside using coordinating pieces of the paper collection. Next decorate the tags using the paper collection and the Borders and Pockets Die. I added the Baby’s Breath glitter to one of the tags usign dries clear glue and set aside to dry.  

Next I colored the seam binding using the Pearlescent Coral Ink and when it was dry I tied a bow and adhered it to the top of the tag. I kept these tags very simple so the Bride can write little thoughts and comments about her day. The album is not bulky and she can slip it inside her bag to carry with her. 

Stamp the bride and groom and wedding rings in Tuxedo black ink onto white cardstock and diecut.  Color using the Dove Blender Pen and ink to color, then add glitter to the hem of the brides dress, well as her bouquet and the wedding rings. 

On the inside stamp the sentiment at the top of the page using Tuxedo black ink. Diecut one of the medallions using the medallion die and adhere to the left. Use hot glue to glue the metal rings over the medallion. Stamp the dove in Tuxedo black ink onto white cardstock, diecut and add glitter to it's plumes. Adhere it to the bottom of the slots holding the tags. I also covered the back of the album with a piece of the paper collection just to give it a more finished look. 

Other Products: White Cardstock, Versamark ink, Foam squares, Heat Gun, die cutting machine, Green thick bakers twine, Memento Grey Flannel ink

To see how to shape the roses watch the tutorial here.

Instructions: Diecut the lace border from the HCDI-7120 Fleur Border Basics Die set and adhere to the edges of the fold out card. Diecut the patterned paper to fit the fold out panels using the plain border edge die from the Fleur Border Basics dies. I have used two sheets of the coral roses and bells paper to cover the front and the back of the card.

Die cut the semi-circular medallion in white cardstock and adhere to the top of the card back.

Stamp the three different doves from the HCPC-3775 Flowering Dogwood & Doves stamp in Tuxedo Black and die cut with the coordinating dies. Sponge the edges with Summer Sky and shape using the Deluxe Flower Shaping kit. Adhere to the front of the card as shown with foam squares and Dries Clear Glue (leave the left bottom one until the leaves and flowers have been added to the card).

To make the leaves stamp with the images with Tuxedo Black. Sponge using the Precision Daubers with Bamboo Leaves before die cutting. Shape the leaves with the Deluxe Flower Shaping kit, trim and adhere to the left front panel, around the base of the dove, on the left side panel and the top right corner of the back panel of the card.

To make the roses stamp the images from HCPC-3752 Classic Rose Stamp with Rose Coral, sponge the petals with the ink before die cutting using the coordinating die. Shape with the Deluxe Flower Shaping Kit and assemble in different sizes. Apply Dries Clear adhesive to the petals with a paint brush or sponge and sprinkle Frosting Powder over the roses. Use a heat gun to bring out the glitter and frosting on the roses. Adhere the flowers as shown.

Stamp the rings image from HCPC-3788 Classic Wedding Roses Cling Stamp set with versamark and then emboss with gold embossing powder. Die cut and add dries clear glue and Crystal Clear glitter to the diamond of the rings for sparkle.  Add to the flowers as shown on the bottom left.

Other products: Paper trimmer, score board, ruler, scissors

Instructions: This a very easy and fun way to make a super interactive mini album that fits in the Classic Wedding train caboose that was highlighted a few weeks ago on this blog. The inspiration for this project came from https://youtu.be/lvsq_ERugUk My Sister Scrapper. Instead of making a mini album that is rectangle as described in the video I altered the mini album to a 3 ½ inches by 3 ½ inches mini album that is put together the same way.

For the pages: You will need to cut six pieces of white cardstock 7 inches by 7 inches square. Score both ways at 3 ½ inches. Cut one of the four score lines to the middle intersection mark on each of the six pages. Cut six pieces of white cardstock 3 inches by 4 ½ inches Score on the 4 ½ inches side at ½ inch from each end and with the 3 inches side across the top score at 1 ½ inches. Cut a small notch at the ½ inch and 1 ½ inch intersection for ease in folding the pockets on each of the six set of pages. Fold on the score lines of the 7 inches by 7 inches white cardstock pieces with the open side on the page on the top and bottom with the folded page with the opening side on right side and bottom forming the pocket. Attached glue to the ½ inch borders of the 3 inches by 4 ½ inches pieces and glue in place to form the pockets. Refer to pictures for details. Attach the pockets with glue. Cut six pieces of white cardstock 3 inches by 3 inches and 12 pieces of white cardstock 2 inches by 3 inches. Cut 30 pieces of Classic Wedding decorative paper 3 inches by 3 inches and 12 pieces of Classic Wedding decorative paper 1 ¼ inches by 4 ¼ inches for the pockets. Attach decorative papers to white cardstock with glue.

For the hidden hinge: Cut a piece of white cardstock 3 inches by 12 inches and score every half inch across the 12 inch side. Glue six sets of hinges starting from the middle and working your way outward with one open hinge that lays flat between each raised page hinge. You will have 1 inch and 1 ½ inches of scored lines left over at each end.

For the cover: Cut a piece of white cardstock that measures 3 ¾ inches by 10 inches. On the 10 inches side of the paper score 3 ¾ inches from each end. I used a ½ inch gusset in between the pages and the hidden hinge system described in the video. Glue the hidden hinge piece in to the binding of the mini album and the extra to the inside front and back cover. Cover the cover with four pieces of 3 ½ inches by 3 ½ inches Classic Wedding Paper and 1 piece 2 ½ inches by 3 ¾ inches paper for the outside of the cover. 

Other Products: Gypsy Soul Lasercut Tag, Westcott Brand Scissors, Trimmer, Distress Ink: Peeled Paint, Spiced Marmalade, Kraft Knife, Silver Foil Paper, Tim Holtz Ideaology Hinges

Watch tutorial in the link to see how to shape the rose: http://bit.ly/2rhcYif.

Instructions: Take your take GSL tag and cover it with the Classic Wedding patterned paper of your choice. Using your kraft knife to cut any lose edges. Then add your Scrapiniec phrase for the tag center and you will then add your fairy you will fussy cut from the Wildwood Cottage patterned paper. 

Flowers: Now you will use your classic wedding roses stamp and stamp a total of 12 flowers. 2 large and 2 medium will shape each rose. Be sure to stagger each layer this allows the flowers to have a nice full look. Take your daubers and ink the rose centers using your Tim Holtz distress ink in Spiced Marmalade. For the leaves you will use your dauber to add depth with the Peeled Paint distress ink. Finish decorating your tag by adding the medallion die in the silver foil paper to the bottom of the tag for an elegant look. Finally add the Tim Holtz Hinges to be the tag topper. 

Other Products: Couple, Ribbon, Pearls, Pearl pen crème, Glitter glue, Gray Cardstock, Acetate, Dove, Lace, gold thread, score board, distress ink Picked Raspberry, Vintage Photo, Versafine Black, Hot glue gun, Ribbon

To see how to shape the roses, watch the tutorial here.

Instructions: Take two 12 x 12" piece of gray cardstock and score it at 4 and 8" turn it and score again 4 and 8". Cut off the corners on both papers, then take a piece of 11 1/4 – 11 1/4" and score this at 3 3/4 and 7 1/2" turn it and do the same again! Cut these corner off also. Now glue them all on top of each other first the 2 big ones and then the small one. Decorate all the panels with paper from the collection. You can make some pockets too, and fussy cut tags of your choice adding gold thread if desired.

Glue the wedding couple in the middle of the box using hot glue. Diecut medallion out of gray cardstock using medallion die. This medallion will be placed behind the wedding couple to create a fence effect. I used strips of clear acetate folded in half and glued the medallion onto the strips of acetate to allow it to stand up.

Stamp Roses and leaves in Versafine Black ink and diecut with coordinating dies. Using the stack and store daubers, color leaves in Bamboo Leaves with light touches of Vintage Photo and Flowers in Picked Raspberry. Shape using Deluxe flower shaping kit following video for shaping flowers. Add desired flowers and leaves in front of couple.

Lid: Using gray cardstock cut out a square of 6 1/8 – 6 1/8" and score at 1 inch all the way round, on one side use a scissors to cut two times one on the left corner and one on the right corner just to the score line, on the opposite side of the square and repeat this process. Fold along the score line and add glue on tabs to shape lid. Cut pieces of patterned paper on top and sides of the lid and box. 

Take the ribbon and create a bow and adhere this on top of the box. Arrange flowers and adhere onto lid as well as dove embellishment. Add lace along all sides of the lid. Add Nuvo drops in centers of small flowers and dots around as desired.

Other Products: White card stock, silver embossing powder, heat tool, VersaFine Grey Ink, Spellbinders Die-Floral Affair, pop dots, Memento Dye Ink Pad-Angel Pink, Memento Brilliance Ink-Starlite Silver, Gemini die cutting machine, scissors, paper trimmer, sponge

Watch the tutorial here to learn how to shape the Classic Rose.

Instructions: Create a 5" x 6.5" card base using white card stock. Locate within paper collection and cut a piece of foiled decorative card stock just slightly smaller than card base as shown. Ink all edges with a silver ink. Adhere to card base. 

Die cut decorative frame from white card stock. Locate scrapbook page with main focal image shown and trim to fit slightly larger than decorative die cut. Adhere focal image behind frame and trim around frame edges to removed excess paper from image. Adhere to card base using pop dots as shown. Using a sponge and dries clear glue, apply glue to decorative frame and sprinkle with Crystal Clear glitter. Set aside to dry. 

Stamp sentiment with Versa Fine Grey ink onto light pink patterned paper from paper collection and sprinkle with silver embossing powder. Heat set and then fussy cut using scissors. Adhere to card base using pop dots. Stamp two of the large rose filled hearts onto white card stock using Versafine Grey ink. Sprinkle with fine detail silver embossing powder and heat set. Using stack and store daubers add a hint of color to die cuts (Angel Pink, Bamboo Leavves). Diecut using coordinating die with center die and then snip apart keeping large rose and two smaller roses on either side. Shape using deluxe flower shaping kit and adhere to card base as shown. 

Stamp one wedding ring image onto white card stock using Versafine Grey ink and heat emboss using fine detail silver embossing powder. Die cut using coordinating die and adhere to bottom rose cluster as shown. Stamp one set of the smaller roses from the Classic Rose Cling Stamp Set as well as one of the triple leaf images onto white card stock using silver ink. Die cut using coordinating die and then color using stack and store daubers. Create one midsized dimensional rose. Shape leaf die cut and adhere along with dimensional rose to upper corner. Using a dries clear glue, add some Crystal Clear glitter to leaves and rose petals. 

Other Products: Pearl White Metallic Cardstock, white cardstock, Brilliance Pearlescent Ivy Ink Pad, VersaMark, Silver Embossing Powder, heat gun, Distress Clear Rock Candy Crackle Paint, Misti, Big Shot, paint brush, hot glue gun, dimensional foam tape

Instructions: Create a 6” x 6” card base with the Pearl White Metallic cardstock. Cut two mat layers from the paper pad 5 3/4” x 5 3/4” and 5 7/8” x 5 7/8”, ink the edges and adhere to the card base. 

Die cut the Medallion on white cardstock. Stamp the sentiment and the wedding bells border with VersaMark and heat emboss using silver embossing powder. 

Diecut the wedding bells with the matching die and use the Stack and Store Daubers with the Poppy and Coral inks to color the ribbon. Add glitter.  

Diecut the sentiment with the Cut Mat Create die and ink the edges and adhere to the card as shown with dimensional foam tape. Adhere the medallion and the wedding bells border to the top of the card using Darice Adhesive Foam Strips.

Watch this video https://youtu.be/Z8P070kC3oo to learn how to create dimensional roses with the Classic Rose Collection. 

Stamp the roses on white cardstock with Pearlescent Poppy Ink, color with Pearlescent Coral and highlight with Pearlescent Poppy. Die cut with the matching die and shape using the Deluxe Flower Shaping Kit. Stamp and color the rose vines with Pearlescent Ivy ink, die cut with the matching die and shape using the Deluxe Flower Shaping Kit.  Paint the roses and vines with Distress Crackle paint and glitter with Rajni Chawla’s Crystal Clear.  When they’re dry adhere to the card using a hot glue gun.

Other Products: Archival ink- Rose Madder, cardstock

Watch the tutorial here to learn how to shape the Classic Rose.

Instructions: Base Card size 8” x 8” and after fold card size is 4” x 8”. Choose your patterned paper and cut to 3 3/4” x 7 3/4”. Adhere this directly onto card base. For second layer cut white cardstock to 3 1/4” x 7 1/4” and pattern paper size is 3 1/8” x 7 1/8” adhere these two together using Dries clear glue. For third layer cut white cardstock to size 2 1/4” x 6 3/4” and pattern paper size is 2 1/8” x 6 5/8”. Attach these two together using dries clear glue. Attach double sided foam tape between the layers to give it dimension. 

Diecut 3 medallions on white cardstock using medallion die. Adhere two medallions on the center of card using glue and attach one to the left of the card.

Stamp Classic Rose petals in Rouge ink onto white cardstock and diecut. Color using Cantaloupe ink and Rouge ink along with Stack and Store Daubers. Stamp Leaves in Olive Pastel ink onto white cardstock and diecut using coordinating die. Color using New Sprout ink, Olive Pastel, Cantaloupe ink. Shape both the leaves and flowers using Deluxe Flower Shaping Kit.

Fussy Cut tags of your choice from designer paper. Arrange items on card as shown. Apply dries clear glue on flowers and add Crystal Clear.

Other Products: Canson Water Color Paper; Glue Gloss; Distress Inks Peeled Paint; Vintage Photo; Foam Adhesive; Blank Cover book Binding Kit; Want2Scrap 72 count white pearls; Nuvo Clear drops

To see how to create the Classic Rose, watch the tutorial here.

Instructions: You can find the printable Cake Template here. Print out the template on copy paper and cut it out.  Use a paper from collection and trace the template onto your desired paper; then score, fold and glue all the fold lines. 

Diecut the Decorative Medallion die twice and attach to each side of the box.

Stamp the wedding bells in Vintage Photo, diecut and colour with vintage photo; rose coral and peeled paint. 

Add Nuvo drops to the bell for detail and allow to dry. Stamp two sets of Classic Rose and two sets of the Classic vine in Vintage Photo on white paper and diecut. Color flowers using Rose Coral ink and Leaves Peeled Paint. Mold and shape the roses and do the same with the leaf vine. Add pollens in center of flowers. Cut the leaf vine apart and assemble to drop over edges of box as shown. 

Detail the leaves and flowers with Crystal Clear and detail the medallion die with same. Final touch to ink edges of box lightly with rose coral chalk ink and adhere small pearls to detail the medallion die. 

Other Products: White card stock 280 gsm, Archival Inks- Jet Black, Pink Peony, Plum, Library green, leaf green, Sparkling dust powder, Zig markers-Grey, Pink and Green, Nestabilities Classic Ovals LG Etched Dies SKU: S4-110, Distress ink-Aged Mahogany, Pollens

Instructions: The finished card measures 6" x 6". Cut a 6 x 6" card panel design that is shown from the paper stack. 

Distress the edges with Aged Mahogany distress ink and adhere on the card base.

Diecut two borders from the Fleur Border Basics die and one decorative medallion die on cream cardstock and adhere on the card front.

Stamp the wedding bells image in Jet Black ink, color with Zig markers and diecut with coordinating die. Stamp the classic rose flower in Plum colour, diecut and colour with Pink Peony ink. Mold the flowers on the flower shaping tool kit. Stamp the smallest of the classic rose in green ink and colour with leaf green ink. Shape a little and add pollens to make filler flowers.

Follow this video by Emma Lou to learn how to make the roses .

Stamp the leaves and colour with Library Green ink and diecut with the coordinating die. Shape the leaves.

Diecut an oval frame, apply adhesive and add sparkling dust powder. Adhere the oval frame on the card front.

Add the wedding bell die cut on the top of the oval die cut. Arrange the leaves and roses at the base of the oval using clear glue. Cut a sentiment from the paper stack, mat in cream paper and add to card base.

Other Products: Ink: Staz-On Jet Black, Olive Green, Royal Purple, Saddle Brown, purple sheer ribbon, natural twine, sand paper, 4 Tumbled Marble 4" x 4" Noce Tiles (Home Depot), make up applicators, cork Con-Tact self-adhesive, Staz-On cleaner, steel ruler, cutting mat, paper towels, craft knife

Instructions: Sand rough edges of tiles, clean off dust with water, wipe dry and let dry overnight. Stamp sentiment from Italiana Riviera Set on top of each tile and Italiana Grape Cluster image on bottom using Jet Black Staz-On Ink. (Note: Apply reinker to ink pad before stamping to make sure ink pad is very juicy when stamping.) Let tiles dry overnight or heat set well with a heat gun.

Using Staz-On inks and make-up applicators, dab colors on tiles to color images. I use paper towels to dab off excess ink before applying to tile and then go back and add more color to shadows. After coloring is completed, bake tiles at 300 degrees for 20 minutes. Let tiles cool.

Cut cork sheet into 3 5/8" squares using cutting mat, metal ruler and craft knife. Adhere cork squares to backs of tiles. 

Create these in a group of 4 for gift giving. Cut a piece of sheer ribbon and tie the group of tiles together. 

For the tag, die cut the pre-made label from the Italiana Riviera Paper Collection using the matching die from Luggage and Tags Die Set. Ink the edges of the tag with Saddle Brown Ink and tie to ribbon with twine.

Other Products: Plain guest book, white pearlised cardstock, 3D foam tape, Foamiran, waterproof black pigment ink, purple pigment ink, white glitter, floral stamens, hot glue gun, magic glue, gold embossing powder, heat gun

Instructions: The ready top fold card measures 5 1/2 x 5 1/2" on white pearlised paper card base. Select the designer paper from the Classic Wedding Paper Collection cut at 5 1/4 x 5 1/4 inches.

Stamp floral heart and wedding rings from Classic Wedding Roses Set using embossing ink and gold embossing powder on white paper, set with heat gun. Diecut with matching die from Classic Wedding Roses Die Set.

Cut another layer Classic Wedding Paper Collection cut at 4 1/8 x 5 1/4 inches, use border to cut out to matching shape with Border Basics Die - cut from pearlised paper and use glue to adhere together, use dimensional adhesive to attach onto card.

To make the pink flowers, stamp the flowers from the Large Classic Petunia Cling Stamp Set into white foamiran with black permanent waterproof ink and sponge the stamped images with the purple pigment ink before die cutting with the coordinating die. Use iron or heat gun to shape flower using your fingers, add floral pink stamens. Sponge the petals with clear quick drying liquid glue. Sprinkle with white glitter.

Arrange flowers and hearts around card.

Other Products: Black Archival Ink, Gansai Tambi Watercolors, Koi Waterbrush, Ebosser, Martha Stewart scoreboard, white & watercolor cardstock,  pearls & adhesive

Instructions: Take a 4 1/4" x  4 1/4" watercolor cardstock & stamp the large rose heart image from Classic Wedding Roses Cling Stamp Set several times with Black Archival Ink. Color it using Gansai Tambi Watercolos & Koi Water Brush. Add small drops of Gloss White Nuvo Crystal Drops around the flowers.

Take a 4 1/4" x  4 1/2" white cardstock & die cut the edge using Fleur Border Basics Die. Use Martha Stewart scoreboard to score stripes on this piece of cardstock.

Adhere both the colored & die cut pieces of cardstock on a 4 1/4" x 5 1/2" white card base.

Stamp the sentiment from Heartfelt Sentiments Cling Stamp Set in black ink on a piece of white cardstock & die cut it using the banner die from Everyday Heroes Die. Shape it and adhere to the top left on the card as shown. Add some pearls along the die cut border to add finiahing touch.