Other Products: Pan-Pastels: Pink-26603, Green-26083 Card-stock: Pink, Dark Pink. Inks: Forest Moss, Victorian Velvet distress inks, STAZ-ON Black Cherry. Other: Bone folder, Craft mat, Scissors, Ruler, Sate skewer, VersaMark, Fussy Cutting Scissors, Double sided Tape, Double Sided Foam Tape, Misti stamping tool, Hot glue Gun.

To see how to shape the petunia, watch the video at https://youtu.be/KOy_qNB9OAk.

For more tips on creating with the foam paper & stamens, watch the tutorial at https://youtu.be/Oma6ctVmUD0.

Instructions: The finished size of this card is 6.102in in x 5.31 in (15.5 cm x 13. 5 cm) Taking the white card-stock, make a tent fold card base 5.31 in x 5.31 in (13.5 cm x 13. 5 cm) Take the pink card-stock and make the matting a little smaller than the card base. Adhere the matting to the base with 3d foam dots.

For the card front, take the pink card-stock and cut to 3.858in x 4.803in (9.8 cm x12.2 cm). Find the paper in the collection with the verse beginning with "There is strength for every burden," trim this so it fits the pink card-stock. Ink the edges with the Forest Moss and Victorian Velvet distress inks and daubers. Adhere together using double sided tape. Taking the dark pink and pink card-stock and the lace border die from the Sweet Borders die set, die cut this 2x each color. Adhere the two colors back to back. Trim to fit a border at both sides of the card front. Adhere in place; adhere also along the card front bottom edge. Adhere this to the card front with 3d foam dots so it peeks over the top of the card base 0.787in (2cm)

For the banner, find the stamp in the Banners of Love stamp and matching die collection. Stamp the image using the gold embossing powder onto the white card-stock. Die cut 4x extra from the white card-stock, adhere all the layers together to form a chipboard banner. Adhere the banner in place by using the 3d foam dots.

The flowers are made from the art foam paper and green stamens. Stamp the flowers with Stazon Black Cherry ink and color using the pink Pan-Pastels. Make the leaves using the same method as the flowers. Stamp with Forest Moss and color with green Pan-Pastels. Arrange and adhere in place around the card front corner and the banner, using the hot glue gun

To make the screw swirls, take the dark pink card-stock and cut small strips of card-stock .039in (1mm). Wrap the card-stock strips around the sate stick. This will form a screw. Trim the screw to the length wanted. Adhere in place using the hot glue gun, pull to stretch the screw out so you will get a swirl screw effect. Add more to the flower clusters as fillers. This card has 10.

Other Products: Archival inks--Plum, leaf green, library green, white card stock, fine pointed tweezers, hot glue gun, NUVO Mousse.

For more tips on creating with the Classic Rose collection, watch the tutorial at https://youtu.be/Z8P070kC3oo.

For more tips on creating with the foam paper & stamens, watch the tutorial at https://youtu.be/Oma6ctVmUD0.

Instructions: Make a card base from white card stock. Cut a piece of white card stock, 10" x 7". Score at the 5" mark on the longer side on your scoring board. Cut pattern paper from classic wedding paper collection 4.75" x 6.75" and adhere to the card front using clear glue. Cut another strip in pink colour of the same size and tear in half. Adhere one half to the right side of the card panel as shown.

Die cut The Botanic Window from white card stock. Cut another die cut from the Festive holiday die. Adhere the window die on the card front on the top and attach the second die cut on the bottom right. Stamp the foam paper with plum ink, the images of the classic rose from the stamp set. Cut with coordinating die. Brush a little colour on the edges with sponge dauber. Heat the flower layers for 2 second with heat tool. Immediately transfer on flower molding pad from tool kit and shape with the ball tool. Make roses as per instructions given in the video. Simlarly make the filler flowers using green ink.

Cut out banners from the paper collection and adhere at the bottom. Stamp a happy anniversary sentiment and adhere on the banners. Finish the card by adding Nuvo Mousse drops of matching colour.

Other Products: White Card Stock, Pink Card Stock, Aqua Card Stock, Brilliance Ink - Watering Can and Crimson Red, Derwent Water Color Pencils (#21, 19 and 51), Yellow stickles and die cutting machine.

For more tips on creating with the Classic Rose collection, watch the tutorial at https://youtu.be/Z8P070kC3oo.

For more tips on creating with the Classic Petunia collection, watch the tutorial at https://youtu.be/KOy_qNB9OAk.

Instructions: To see a larger photo of this project, click here. This heart shaped box measures approximately 6" x 5" x 2 1/2" high. To make this box lets start with the base. For my project I created a 5" x 6" heart using my electronic cutter but you could use a template or die just the same. You will need 2 hearts and 2 strips of white card stock measuring 9 1/4" x 2 1/2". Scor the strips at the 1/2" mark on the bottom and 1 side and along the bottom cut relief cuts up to the scor line to allow the card stock to bend. Attach one side the 2 strips together, end to end to form a long strip and fold all your tabs from the relief cuts into the middle. Take one of your hearts and put adhesive along the edge and starting from the top of the heart, place the joint where you joined the 2 strips right into the center of the heart and working one side at a time attach the tabs along both sides until you reach the point at the bottom. At this point if your strips are a little long you can simply cut them to length before fastening them together. The top will be created the exact same way but you need to make the top just slightly larger to allow the top to close over the bottom.

The Classic Rose and Petunia flowers were stamped on white card stock using Watering Can ink and die cut with the matching dies before distressing with Pearlescent Poppy and Pearlescent Coral inks before shaping with the flower shaping tools. After the Petunia flowers were shaped they were finished with Pastel Bead Stamens-Medium.

The corner floral images from the Banners Of Love Cling Stamp Set were stamped on white card stock using Watering Can ink and die cut with the matching dies before coloring with Derwent Water Color Pencils.

The "Just For You" banner was stamped on white card stock using Watering Can ink and die cut with the matching die before coloring with Derwent Water Color Pencils and accenting with Yellow stickles.

Other Products: Red Cardstock, light weight white cardstock, VersaMark embossing Ink Pad, Detail Black Embossing Powder, double sided tape, glue gun, heat tool, white ribbon, Misti, mini mister, stapler, Avery Elle Stamp and Die Storage Pockets - clear.

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE. For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: To see a larger photo of this project click here. Select the plaid paper from the Heartfelt Love Paper Collection and cut at 12 x 10 inches. Score at 5 and 7 inches. Position the Eyelet heart and a smaller nesting heart on the font panel and die cut. Cut a piece of clear cardstock slightly larger than the heart and adhere with Dries Clear Adhesive. Allow to dry.

Cut the red topper at 5 x 2 inches and score at 1 inch. Cut the Sweetheart Border Die on white cardstock. Use the Spellbinder Tool N' One to weed any remaining pieces that may remain in the die cut. Adhere to the bottom of the topper with Dries Clear Adhesive.

Stamp the sentiment from the Heartfelt Love Sentiments Stamp set with VersaMark Ink on white cardstock. Apply Detail Black embossing powder and heat set. Die cut with the Circle Basics Large Die Set.

Stamp the petals of the Classic Rose Stamp Set using the Rouge ColorBox Fluid Chalk Inkpad on white cardstock and Die Cut with the coordinating die. Sponge the tips of the petals with the Rose Coral ColorBox Fluid Chalk Inkpad. Spritz lightly with water with a mini mister and shape with the Rose Shaping Mold. I added additional shaping with the Deluxe Flower Shaping Kit. Assemble. Stamp the Sun Fleur Cling stamp on green cardstock with Memento Olive Grove Ink. Die cut with the coordinating die. Shape gently with the Flower Shaping Kit. Use one of the petals for the sepal under the flower. Assemble the sepal and petals. Punch a hole in the middle using the sharp end of the Spellbinder Tool N' One or the Deluxe Flower Shaping Kit. Insert a few of the Pastel Pearl - Small Stamen.

Fill an Avery Elle Stamp and Die Storage Pocket with the treat of your choice. I used Lindor Truffles. Insert in the pocket inside the treat bag flaps and place the topper on top. Staple in place. Wrap with a ribbon and tie a bow. Adhere the flower and sentiment to complete your Heartfelt Love Treat Bag.

Other Products: Centura Pearl White cardstock, Pearls, Stazon Cherry Pink ink Centura Pearl White cardstock, Pearls, Stazon Cherry Pink ink.

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

For more tips on creating with the foam paper & stamens, watch the tutorial at https://youtu.be/Oma6ctVmUD0.

Instructions: To see a larger photo of this project, click here. Die cut 4 of the panels out of the Centura Pearl cardstock and assemble. Cut 4 plain square panels from the small heart patterned paper and adhere on all sides of the box. Cut 4 panels for the top of the box out of the small heart patterned paper and adhere to the top of the box. Cut 4 decorative panels from the darker paper and adhere to the sides. To finish decorate with pearls as shown.

To make the leaves stamp the images from the HCPC-3545 Open Leaf stamp set with Tuxedo Black ink on white cardstock. Colour in the leaves with Bamboo Leaves ink and die cut with the coordinating die, shape and adhere to the top and over the box as shown.

To make the flowers stamp the images from the HCPC-3752 Classic Rose Cling Stamp set in Cherry Pink ink on art foam paper and die cut with the coordinating die. Colour the edges with the Carmine Red stamp paint with a damp sponge. Heat and shape with a heat gun. Use two large petals and the next size petal and assemble with a glue gun. Add the stamens in the centre and adhere to the top of the box over the leaves.

To make the smaller flowers stamp the images from the HCPC-3644 Birds and Blooms Stamp set with the Olive Green ink on foam paper and die cut with the coordinating die. Lightly colour the flowers with the Gold/Silver stamp paint with a damp sponge. Heat and shape with a heat gun. Pierce the centre of the flowers with the piercing tip from the Deluxe Flower Shaping kit and insert the pearl stamen. Adhere to the box as shown.

Other Products: A5 quite Card Blank , 3D Foam Pads, Red Ink pad, EBosser Die cutting Machine, Red card, White Card .

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: Take a sheet of A4 white card fold this in half to create your A5 Card base.

Cut a sheet of Red card to A5 size, glue this onto your white card base with dries clear adhesive. Take a sheet of paper from the Heartfelt Love Collection cut this to mat on top of your red card and adhere this to the red card with 3D Foam Pads

Cut a sheet of white card to layer over your patterned paper. Place the Love die From the Banners of Love Set at the bottom of your card and add 2 of the Eyelet Hearts Dies to the top center of your card run this through your Die Cutting Machine.

Save the letters and the large heart for another project. Stamp I love you from the Heartfelt Love Sentiment Stamps onto the smaller Heart with red ink and add this on top of your Patterned paper with 3D Foam Pads.

Other Products: Spellbinders Decorated Birthday Die , Glue Gloss

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Finished card is 5 1/2 x 6 1/4". Die cut the base from white cardstock using the Spellbinders Decorated Birthday die and assemble into a centre step card. Cut strips from the striped patterned paper in 7/8 strips and adhere to the sides of the step card and trim to fit. Cut a trim of 1 2/8 x 1" and adhere to the sides of the front step.

Cut the sentiment panel from the patterned paper and die cut two lace trims from the HCD1-7161 Sweetheart Borders Die from white cardstock and adhere to the sides of the panel. Trim the lace edge to fit the panel. Die cut the frame from the HCD1-7150 Window Box Elements Die in white cardstock and adhere to the top of the panel. Cut a piece of white cardstock 5 3/4" x 3 7/8 and adhere to the back of the panel. Adhere this panel to the centre front of the step card.

To make the leaves stamp the images from the HCPC-3545 Open Leaf stamp set in Bamboo Leaves on white cardstock. Colour the images with New Sprout ink and die cut with the coordinating dies. Sponge the edges with Bamboo leaves before shaping using the Deluxe Flower Shaping kit. Adhere to the front of the card as shown with dries clear adhesive.

To make the flowers stamp the images from the HCPC-3608 Arianna Blooms Stamp set in Pearlescent Coral ink on white cardstock. Ink the centres with Canteloupe ink and die cut with the coordinating die. Shape the flowers using the new HCFB1-464 3D Floral Basics Shaping Mold. Finish shaping into a cup shape with the shaping tools and allow to dry. Using Glue Gloss add Frosting Powder to the flower petals and heat using the heat gun for a frosted finish. Add the prills to the centres of the flowers with Dries Clear glue. Adhere the flowers to the card as shown.

Other Products: VersaMark, White/Iridescent Ribbon, Heat Tool, Stamping Up Melon Mambo Cardstock, Misti, Big Shot Plus, Hot Glue Gun.

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

To see how to shape the roses, watch the video at https://youtu.be/Z8P070kC3oo.

Instructions: Create a side fold 5" x 6'" card base from Melon Mambo cardstock. Cut a mat layer from the Heartfelt Love paper collection at 4 7/8" x 5 7/8", distress the edges and adhere to the card base using dries clear adhesive. Cut another mat layer from the Melon Mambo cardstock at 4 5/8" x 5 3/4" and adhere to the base using dries clear adhesive. Cut another piece of the designer paper at 4 3/4" x 5 5/8", stamp the Forever Love Background Stamp with VersaMark ink, sprinkle with gold embossing powder and heat set. Distress the edges and adhere to the card base.

Stamp the Classic Roses with Lilac Posies ink, color with lilac posies and cantaloupe ink, diecut using the coordinating die, shape using the deluxe flower shaping kit. Stamp the Leaves with Bamboo Leaves ink, color with Bamboo Leaves and Lilac Posies, diecut using the coordinating die and shape using the deluxe flower shaping kit.

Sponge the flower and leaves with dries clear adhesive and sprinkle with Rajni Chawla's Crystal Clear. Adhere to the card base with hot glue gun as shown. Make a small triple loop bow and adhere it under the rose.

Other Products: Fired Brick & Aged Mahogany Distress ink, Black Archival Ink, Mini MISTI, Ebosser, Cuttlebug Anna Griffin Poppy Embossing Folder, red cardstock, Pick me Up, Red Satin Ribbon & black rhinestones.

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: Emboss a piece of 4 3/4" x 6 3/4" white cardstock using Cuttlebug Anna Griffin Poppy Embossing Folder. Adhere it to a 5" x 7" black cardbase.

Take a piece of 4" x 6 1/4" red cardstock & die cut one of the long edges using Sweetheart Borders Die. Emboss the rest of the cardstock using the same embossing folder. Ink it using Stack and Store Daubers, Fired Brick & Aged Mahogany Distress inks. Adhere it to the card base aligning it to the right side as shown using Darice Adhesive Foam Strips.

Stamp the Forever Love Background Stamp on a 4" x 5 1/4" white cardstock using Black Archival ink & adhere it on a slightly larger black cardstock. Wrap a red satin ribbon around the bottom of this cardstock. Adhere this to the card base as shown using Darice Adhesive Foam Strips.

Die cut 2 pieces of red cardstock using Eyelet Hearts Die. Stamp the sentiment from Heartfelt Love Sentiments Stamp Set using Aged Mahogany Distress ink several times on the smaller heart. Adhere them together & then on the card base on the ribbon using using Double Dots 3D Foam Circles.

Stamp the banner & sentiment from Banners Of Love Stamp Set & Heartfelt Love Sentiments Stamp Set on a piece of white cardstock using Mini MISTI. Die cut the stamped banner using matching die from Banners Of Love Die. Adhere it on the heart using Designer Dries Clear Adhesive. Add some black rhinestones on the ribbon using Pick me Up & Ebony Black Nuvo Crystal Drops to the die cuts for a finishing touch.

Other Products: Distress ink Picked Raspberry and Wilted Violet, Archival Inks Black, Library Green, Leaf Green, Plum, Magenta Hue, Paper Distressing tool or a pair of sharp scissors, Acetate Paper, Versamark ink, Funnel Tray, Glossy Accent, White Smooth Cardstock, Black Chipboard, Double sided tape, Fuschia Color Ribbon, Crop -a-Dile, Thin Wire, paper towel, Heat Gun.

For more tips on creating the Winter's Eve collection, watch the tutorial at https://youtu.be/Hf9-3YQWBXM.

Instructions: To see a larger photo of this project, see here. Cut a tag from a smooth white cardstock measuring 4 1/4" by 7 1/2". Stamp a few images of snowflakes randomly from Snow Kissed Spruce Cling Stamp Set with Versamark and sprinkle with white embossing Powder. Heat set it using a heat gun. Distress the tag using Picked Raspberry and then with Wilted Violet. Once happy with the background, mist a little with water and dab it with a paper towel. Further distress all the sides with Paper distressing tool or scissors. Layer it on a white cardstock 1/8th inch larger on all sides from the original tag. The next layer added is with black chipboard, again 1/8" larger on all the sides.

For The shaker Window, Stamp the window image from Window Frame Cling Stamp Set, with black archival, and cut it using it's coordinating die. Color the window using Wilted Violet and Picked Raspberry and adhere an acetate measuring 2 1/2" by 3 1/2", behind the window. Cut extra 4 windows without stamping. Glue all these together to create dimensions. Cut a piece of white cardstock measuring 2 1/2' by 3 1/2" and stamp an image with Fushchia Pink Stazon. Glue this image behind the window panel to create a scene. Fill the window with Crystal Clear Powder and close the window by gluing colored window panel.

Trees from Snow Kissed Spruce Stamp Set are stamped using Archival ink Library Green and then painted the edges with Leaf Green. With the help of Adhesive that dries clear and crystal clear add a little sparkle to all the trees.

Images of deer from Woodsy Critters Cling Stamp Set is stamped with black archival ink and then cut using its coordinating die. These are then painted using distress ink, Vintage Photo, and Peeled Paint.

For Poinsettias, stamp multiple images from Poinsettias & Holly Clusters Cling Stamp Set with Plum Archival Ink and Holly leaves with Library Green. Cut them using their coordinating dies. Poinsettias are colored using Magenta Hue and leaves are colored using Leaf Green and Olive Green. Shape them using Deluxe flower shaping kit. Arrange the flower and add prills in the center.

Holly leaves from Festive Holly Cardinal Stamp set are stamped using Black Archival and then painted using Peeled paint and Mowed Lawn Distress inks.

For snow hill, cut a small piece of white cardstock measuring 3" by 4 1/2" and cut it using Fleur Border Basic Die as shown. Distress a little with Picked Raspberry and stamp a sentiment from Ornate Sleigh Cling Stamp Set, with Black Archival ink.

Once all the elements are ready, layer them as shown, using foam dots creating different dimensions. Finish the tag by tying a ribbon along with a small tulle of net and lots of sparkle.

Other Products: Bling on a string, White Cardstock, Hot Glue Gun

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: My card size is 4 1/2" x 6". Cut a piece of white cardstock 6" X 8 1/2". On the 8 1/2 side, score at 4 1/2". This makes the card front measure 4" X 6" and the back panel is 4 1/2" X 6". Cover the front and the inside of the card with paper from the Heartfelt Love paper collection.

Cut out the border die using white cardstock and adhere it to the card front about 1" down from the score line. Next I chose one of the sentiments from the paper pad and backed it with a piece of white cardstock. Use the Lipstick Red ink to edge the white cardstock to match the designer paper and then glue the sentiment to the piece of cardstock with dries clear adhesive. Glue this down, tucking it behind the die cut piece. Next I used my hot glue gun to add the bling along the top edge of the die cut piece.

I went back to the paper pad and chose the cute little frog sentiment and cut it out. I matted it with another piece of white cardstock and then glued it down to the inside of the card. I used the Designer Dries Clear Adhesive to add some glitter accents to the little fireflies and the cattails. Once everything is dry, the card is finished!

Other Products: Distress Inks: Vintage Photo; peeled paint; cracked pistachio; WOW embossing powder white; Creative Embellishments Flourish Chipboard; Prima Art Stones; Gesso; Art Anthology Mists: Fiesta Key; Sandcastle; Cowboy Glaze; Fabscraps metal embellishments; gold brads. Canson water color paper. Tim Holtz poinsettia stencil. Crafters Workshop Modeling Paste; white chipboard. Xpress it Double sided tape. Hot Glue Gun.

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

For more tips on creating with the Celebrate The Season collection, watch the tutorial at https://youtu.be/ePihXJz9zSQ.

Instructions: To see a larger photo of this project click here. Cut a 3.5 x 3.5" piece from white chipboard and score .25" on each end. This will be our base of the lantern. Using canson water color paper cut out four of the gift box die. Apply a coat of gesso and let dry. In the meantime Stamp out three sets of the Poinsettia and Holly Clusters and leaf set, color leaves with peeled paint and the poinsettias cracked pistachio. Pierce with paper piercer to make room for the stamen. Attach a few together but leave some singles. Insert stamen from bridal set.

Cover chipboard with versa mark ink and heat set with WOW embossing powder. On all four sides of the gift box, using the tim holtz stencil, add a coat of modeling paste randomly using the poinsettia stencil. Instead of folding the box on the bottom, i attached the white chipboard to each end of the lantern and used heavy duty double sided tape to secure this together.

Using the Art Anthology Mists; apply some color to the lantern on the edges and on the poinsettias and use water to move the color, heat set in between. Add art Stones to the center of the poinsettias as shown in my sample.

Add the chipboard and poinsettias to each side. Detail with frosting powder and crystal clear. Stamp out two merry Christmas sentiments from Celebrate the season set and adhere to sides as shown, Complete and decorate as you like. Cut a 6.75 x 1.5" piece from Canson water color paper for the handle; ink with vintage photo and cracked pistachio attach fabscraps metals to each end with brad and hot glue this to the top as shown.

Other Products: Heavy weight white card stock, Copic Markers: R21, R17, R29, R59, YG03, YG17, YG63, E33, E35, 3M Foam Tape

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: To see a larger photo of this project, click here. Luminary is 4" X 4". Cut 5 box panels out of heavy white card stock, cut out center of bottom portion with the square die in Box set. Glue vellum to the back of each open square. Cut away top 2 portions of the box leaving bottom 2 portions and flaps for closure then put box sides together with Dries Clear Adhesive. Cut 4 fence dies from Essential Borders and 6 decorative borders from Essential Borders. Glue fences at the bottom and decorative borders at the top and at the top of the vellum panels. The bottom of box may be glued shut as top opening is large enough to set Tea Light in and take it out.

Stamp and die cut Festive Holly and Cardinals (2 or 3 sets)with Tuxedo black Memento Ink on white card stock, Poinsettia (3 or 4 set) with Lady Bug Memento Ink on white card stock and then color Festive Holly and Cardinals with Copic Markers, sponge Poinsettias with more Lady Bug. Place Poinsettias in flower mold, spritz with water and run through your die cutting machine (see Video about flower molds for more info). Shape the Holly and Cardinals using the Deluxe Flower Shaping Kit. Stamp sentiment 2 times with Lady Bug and die cut each with small oval then edge the ovals with more Lady Bug ink.

Glue 2 layers of shaped Poinsettias together for each flower and add Lettuce Entertain You Prills to the centers. Sponge adhesive onto flowers, Holly and Berries then sprinkle with Rajni Chawla's Crystal Clear.

Glue Holly and Cardinals to box all the way around, cutting and piecing as needed and use foam tape to lift some pieces to give more dimension. Glue Poinsettias here and there as desired to finish decorating your Gazebo. Add the Merry Christmas sign to 2 sides on the top portions of Gazebo Luminary with foam tape.

Other Products: Archival Ink-garden Patina, Leaf green, ribbon, cream cardstock, water spritzer, die cutting machine, scissors.

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: To see a larger photo of this project, click here. Cut 4 pieces of Gift of love box die and assemble them.

Next, stamp Poinsettia cluster using Archival ink Garden Patina for poinsettias and Leaf Green for leaves, cut them with coordinating die and color them with the same ink. Place colored flowers and leaves onto flower shaping mold, spritz with water and run through your die cutting machine. Now that they are shaped you can assemble them, inserting stamens in the center. Apply adhesive as desired and sprinkle Crystal Clear.

Once all the flowers are ready, adhere them on the box as shown on the picture. Add sentiment from the Winter's Eve designer paper collection.

Other Products: Cardstock (White, Dark Brown, Kraft), Silver Pearls, Close To My Heart Ink (Chocolate, Ponderosa Pine, Fern, Ruby), Spectrum Noir- Sparkle Pen, Glass Glitter, Scrapbook Adhesives by 3L (3D Foam Squares-Mix, White Creative Photo Corners, Adhesive Dots- Micro, Adhesive Dots- Medium, E-Z Runner Grand)

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Layout is 12 x 12". Brown cardstock is the largest layer. Cut white cardstock to 10.5x10.5". Cut the red patterned paper to 10x10". Adhere these layers together. Cut the wood grain patterned paper to 6x12". Cut the green patterned paper to 6.5x12". Adhere these layers together and to the middle of the layout.

Cut 2 of the decorative scrolls from white cardstock. Cut 2 of the largest circle from green patterned paper. Cut 2 smaller circles from the red patterned paper. Adhere the decorative scrolls to the large green circles. Then add the red circles using 3D foam squares. Adhere to the layout using 3D foam squares. Mat the photo in white, kraft and then white cardstock again. Add white photo corners to the matted photo. Adhere to the middle of the layout. Find and cut out the "Christmas Blessings" sentiment and flag both ends. Adhere to the layout using 3D foam squares.

Stamp and die cut 2 sets of the larger poinsettias using brown ink. Stamp and die cut 1 set of the large holly using dark green ink. Stamp and die cut 1 set of the small poinsettias in brown ink. Stamp and die cut 1 set of the small holly clusters using dark green ink. I added color to the poinsettias using Ruby red ink and daubers. I added color to the holly leaves using Fern ink and daubers.

Using the 3D Poinsettia Shaping Mold, shape the poinsettia and holly. Assemble the layered poinsettias. Using liquid adhesive add glass glitter to the middle of each flower. Using a glitter pen, add sparkle to all of the petals. Let dry.

Adhere the poinsettias to either side of the matted photo and to the decorative scrolls above and below. Add holly leaf pieces around all of the poinsettias.

Die cut 1 Arianna Lace image in white cardstock. Cut the petals apart and add 1 to each corner of the red patterned paper. Add silver pearls to each. Also add pearls to the decorative scrolls.

Other Products: Stampin Up Chocolate Chip, Real Red, Garden Green Inks

Wildwood Cottage Collection https://youtu.be/g8WLXE8hLRk.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Inspiration for this project comes from Mini Accordion Hinge Book https://youtu.be/2W5wniln328.

Instructions: To see a larger phot of this project, click here. Scoring, Folding and Trimming: Fold 10.5 inches x 10 inches black card stock in half and burnish creases with a bone folder. Die cut ten Wildwood Cottage card bases as per instructions in the video. Cut on fold line of each card base from one inch to 3.5 inches. Cut black cardstock 7.5 inches x 9 inches. Score at one-inch intervals on the long side. Open the accordion folded piece and trim vertically at 5 inches and 2.5 inches cutting across the creases to create three long strips. Connect the strips end to end with glue. Cut and trim ten 3/4 inch by 4.5 inches strips from black cardstock. Cut 38 3 1/2 inches by 3 1/2 inches white cardstock for the inside pages of the mini accordion for photo mats.

Mini Accordion Hinge Book Assembly: Slide one mountain fold of the accordion spine into the slit of one WIldwood Cottage card base from the outside to the inside. Insert one black binding strip into the accordion pleat to secure it to the page. Repeat to insert all pages onto the spine. Adhere the front cover and back cover tabs with dries clear adhesive. Glue the white cardstock photo mats to each page of the album.

Decorate Mini Accordion Hinge Book: Stamp the small poinsettias and holly from the Poinsettia & Holly Clusters Stamp Set five times, color with chocolate chip ink, die cut and color with Stampin Up Chocolate Chip, Real Red, and Garden Green ink using sponge daubers. Place the flowers in the molding tray and run through the die cutting machine for shaping. Finish shaping with flower shaping tools and glue together. Insert prills with glue into the center of each flower. Set aside to dry. Die cut a front and back cover from Festive Holly paper with the Wildwood Cottage die. Glue front and back cover into place with dries clear glue. Stamp 38 images from the Festive Holly & Cardinals Stamp set with chocolate chip ink, die cut and color with Stampin Up Chocolate Chip, Real Red, and Garden Green ink using sponge daubers. Glue one holly bunch to each page of the album.

Adhere the flowers to the front cover as shown.

Other Products: Black Archival ink, light green pigment ink, white cardstock, adhesive, hot glue gun, red pigment ink, 3D gloss gel, art stones, mini art stones, snowflake paste, heat tool, 3D foam tape.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: To see a larger photo of this project, click here. Take a ready prepared Christmas bulb ornament and select paper from the Festive Holly Collection, cut it out to size of bulb as shown and glue it down using dries clear adhesive. Chose sentiment from the paper collection, cut it out and adhere using 3d foam tape. Decorate with gloss gel and art stones. Take Clear adhesive and draw some lines around art stones and sprinkle mini art stones. Arrange poinsettias as shown and adhere using hot glue gun. Use snowflake paste to decorate, heat up using heat tool.

To create flowers, stamp the Poinsettia & Holly Clusters Stamp Set on white paper with black Archival ink and cut using the coordinating dies. Colour the poinsettias with red pigment ink using a sponge. Colour the holly with light green pigment ink. You will need one petal for each flower. After colouring, place the flowers and leaves into the mold face down and run through cutting/embossing machine. When dry, adhere the flowers to the holly leaves using Clear Adhesive, pierce a hole in the center and insert stamen. Add a little hot glue to the base to hold the stamen. Use a paint brush to add dries clear to the flower petals and leaves and sprinkle with Rajni Chawla's Crystal Clear glitter.

Other Products: White Cardstock

For more tips on creating with the Classic Petunia collection, watch the tutorial at For more tips on creating with the Classic Petunia collection, watch the tutorial at https://youtu.be/KOy_qNB9OAk.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Prepare your card base at 5x7" topped with a piece of 4 3/4 x 6 3/4" Classic Petunia paper from the paper pack.

Using some of the scrap white card stock that you trimmed off, cut one piece 1 x 6 3/4" and the other one 1 x 4 3/4", top those with more Classic Petunia paper add the shortest one first, add D-Dots to the back of the long one and adhere to card as shown.

Stamp the Classic Petunia Bouquet on white with Tuxedo Black, color in with the Wisteria and Bamboo Leaves, cut out and set aside. Stamp the flowers and leaves on white with Tuxedo Black, cut out, using the daubers color just the edges of the flowers with the Wisteria. Shape the flowers using the Floral Basics Shaping Mold, using the paper piercer from the Flower Shaping kit poke a hole in the center of each flower, Use 3 large and one small for one of the flowers and 2 large one small for the other 2 flowers. Add the stamens to the center of the flowers. Adhere to the top of the bouquet and adhere to card where the 2 stripes cross.

To finish add Crystal clear to both the flowers and leaves.

Other Products: Curious Iridescent - Cryogen White Paper; Copics - BG45, BG49, YG01, YG05, YG17, RV55, Y06; Art Glitter Ultrafine Transparent - Ensalada and Banana; Art Glitter BK007 Phlox; Want2Scrap 72 Count - Turquoise Rhinestones

For more tips on creating with the Young at Heart collection, watch the tutorial at https://youtu.be/kmqAVM6ibfM.

Instructions: Begin by creating a 4 1/4" by 5 1/2" card base out of white card stock. Cut an A2 card front from the Young at Heart Paper Collection and die cut the image using the coordinating die from the Eyelet Circle and Basics Small Circle Die Set. Sponge edge of A2 card front with New Sprout Memento Ink and adhere to card base using pop dots. Adhere die cut image directly to card base using Dries Clear Adhesive. Cut "Journey" sentiment from the design paper and sponge edges with Teal Zeal Memento Ink and adhere to card as shown with pop dots.

On White Cardstock with Tuxedo Black Memento Ink stamp the flowers in the pot using the Wildwood Cottage Darlings Stamp Set die cut with the coordinating die. Color flower pot using Copics BG45, BG49, flowers using RV55 with Y06 in the center and the leaves using YG01, YG05, YG17. Lightly shape the flower pot using the Deluxe Flower Shaping Kit. Adhere flower pot to card front as shown with pop dots.

With Dries Clear Adhesive add Banana Glitter to the flower centers on the die cut flower pot and to the flowers on the design paper, add Ensalada Glitter to the greenery in the flower pot and to the grass and greenery on the design paper and Phlox Glitter to the flowers around the window on the design paper. Adhere the Turquoise Rhinestone to the upper right hand corner of the card front, as shown.

Other Products: Hot Glue Gun, Gypsy's Soul Lasercut Dome, Distress Ink: Peeled Paint, Walnut Stain, Liquitex Gesso

For more tips on creating with the Classic Rose collection, watch the tutorial at https://youtu.be/Z8P070kC3oo.

Instructions: to see a larger photo of this project, click here. Cover your dome using paper from the Winter's Eve Collection. Once complete, you will fussy cut the main sentiment from the Heartfelt Love Collection and cover with a frame. Adhere to the wall of your dome. Diecut the sweetheart die from mirror cardstock and adhere to the wall with dries clear adhesive.

For the fence you will first cover with gesso. Once completely dry, sponge on the distress ink in peeled paint and walnut stain to give it a distressed look. The owl will be fussy cut from the Sugar Hollow collection and will be glued to the fence.

To create the flowers take the Classic Rose stamp and using Berrylicious ink, stamp 5 sets from the large and medium stamp set. Now diecut all of the stamped images with the coordinating die. Using your mold apply a light mist of water and add the various flowers then run through the die cutting machine to give you a perfectly molded flower. You can add some additional molding using your hand and shape as desired. Glue each of the roses using 3 diecuts. For the center you will form a bud by simply embossing to cup the flower with the deluxe flower shaping kit and then apply glue to hold it together.

When done, fussy cut the leaves from the Under the Sea collection and add your flowers as desired to complete your sentiment stand.