Instructions:

Ready side fold card measures 8" × 6". Cut a mat from designer paper collection measuring 5.75" × 7.75", distress edges with matching ink and adhere it on ready card base. Further, cut another mat from designer paper collection measuring 5.25" × 7.25", distress edges with matching ink and adhere it on white cardstock which is 1/8 of an inch bigger on all four sides. Glue it to card using dimensional tape. Cut one more mat from vellum paper measuring 5.25" × 7.25" and adhere it to card using tacky tape. Cut a frame from white cardstock and a frame from Luxe Gold cardstock using Oval Filigree Frame Die. Glue both pieces together and adhere it on card using dimensional tape. Cut an oval piece from designer paper using a die from the same set, distress edges with matching ink and adhere it on card. 

Stamp Garden Lily flowers on deluxe flower shaping paper using magenta hue ink and sea grass ink. Cut with coordinating dies and paint using same ink. Stamp leaves from Garden Lily and filler from Garden Lily Bouquet & Buds using olive green ink and cut with coordinating dies. Paint leaves using leaf green ink. Shape flowers and leaves using 3D Shaping mold. Pierce the centre of flowers and add stamens. Arrange flowers and leaves on card using hot melted glue. Once satisfied with arrangement, brush them with clear adhesive and sprinkle Rajni Chawlas's Crystal Clear.

Stamp Butterfly image on vellum paper using white ink and heat emboss using white embossing powder Cut with coordinating die. Glue it on card using foam dots. Cut a sentiment strip from white cardstock using a die and stamp sentiment on it using magenta hue ink. Glue it on card as pictured. For a finished look, glue a bow of white satin cord. 

Other Products: Smooth white cardstock, Sea Grass Archival, Satin Cord

Instructions:

Card size:  3 1/2" x 8 1/2". Cut white cardstock 8 1/2" x 7” then score and fold in half lengthwise to make a 3 1/2" x 8 1/2" card base. Cut decorative paper from Garden Lily Collection with the Slim Eyelet Rectangle to fit. Cut the Slim Lattice Rectangle from white. Glue layers together on card base except small white oval. On the small white oval stamp the sentiment using Bamboo Leaves.  Also cut the small oval from foam sheet or use pop ups and adhere to center of card.

Stamp the Lilies using Vibrant Fuchsia and New Sprout, sponge fuchsia flowers with Magenta Hue. Stamp leaves with Bamboo Leaves, sponge with New Sprout, (including Garden Lily Spray), die cut then shape in the mold. Glue 2 of each size together and pierce the centers to add stamen, (Rock Candy stamen were dyed dark orange with alcohol ink refill). Glitter flowers.

Stamp Lilacs with Sunflower, sponge with Buttercup, die cut then shape (each flower has 3 layers). Fill centers with Prills. Glitter flowers.

Brush 3D Lacquer onto leaves, let dry then arrange leaves and flowers around sentiment on left side.

Randomly glitter card front.

Other Products: White Cardstock, Foam sheet, Alcohol Ink Refill-Orange

Instructions:

Prepare a 5 x 7” white easel card. Die cut one of the Rectangle Filigree Frames (die #1) out of white card stock and one out ot the Silver card stock. Adhere the 2 together slightly offsetting so the silver will show. Adhere to the front of the card on the upper half. Use the inside of the frame and cut out of the Garden Lily paper 2B, add foam dots to the lower half and adhere to the card. Die cut the next die (#2) from the set with white and sliver card stock. Marry the 2 together. Add foam dots to the back and adhere to the front. Die cut (die #3) another  piece of the Garden Lily paper on top as shown.

Add another piece of the Garden Lily paper slightly smaller to the inside of the card.  Die cut the 4th die out of white card stock and die #4 out of the Garden Lily paper, stamp the sentiment on it, adhere to the white piece, add foam dots and adhere to the inside lower part of the card.

Stamp the Garden lily flowers on white with the Vibrant Fuchsia ink, color with the Pink Peony. Cut out with the coordinating die, place in the matching mold and run through the die cut machine to shape. Add stamens in the center of one flower, put 2 together making one flower. Add all the flowers to the flower stems.

Stamp the leaves on white with the Cottage Ivy ink. Color with the Vivid Chartreuse. Cut out with the coordinating die, highlight the edges with Emerald Green ink. Place in the matching mold and run through the die cut machine to shape.  

Adhere the flowers and leaves on the card.

 To finish, add glitter to all the flowers and leaves.

Other Products: Paper trimmer, Die cut machine, Hot glue gun, Ribbon, Foam squares,

Instructions:

Cut a 7.5” paper from the collection and a slightly larger piece of kraft card, rag the edges of both and layer onto the 7.75” square white card base.

Select and cut a 6” square paper panel from the collection. Cut a slightly larger piece of kraft card and rag the edges of both, layer together. Die cut the decorative Simply Elegant Centrepiece die using kraft card and adhere to the centre of the panel. Adhere the panel to the card base using foam pads.

Die cut the large tag, using the paper tag and kraft card. Stamp the sentiment onto the tag at a slight angle as shown and layer with the kraft card, Tie with bakers twine and adhere to the centre of the card using foam pads at the top of the tag.

Make the leaves: Stamp the  leaves x3 onto paper from the collection using northern pine ink, die cut and add additional colour to the edges using a dauber. Place face down into the mold, spritz lightly with water, and run through the die cutting machine to shape.

Make the yellow flowers: Stamp 2 small lily petals onto flower shaping paper using buttercup ink, colour lightly with buttercup ink and make a stroke line along the centre of each petal using copic Y26. Die cut and colour the reverse of the petals, place face down into the shaping mold, spritz with water and run through the die cutting machine to shape. Add more buttercup ink to edges and additional shaping using the flower shaping tools. Adhere 2 sets of petals together, offsetting the petals, to create the flower. Varnish the petals using 3d lacquer. Take 3 bridal stamens and colour both ends using Morocco ink, thread through the centre of the flower and keep as tall above the flower as possible, thread a grey wired bead stamen into the centre, position the stamens and adhere in place using hot glue. Brush with 3d lacquer.

Make the pink lilies: Stamp x2 large and 1 small petals using rose bud ink onto flower shaping paper. Stroke the ink from the centre of each petal towards the outer edge using a triangle dauber. Die cut, place face down into the shaping mold, spritz with water and run through the die cutting machine to shape. Add additional shape if required using the flower shaping tools. Adhere 2 sets of 3 petals together, offsetting the petals, to create the flower. Thread through 3 black rock candy stamen and a gold wired stamen, open out and hold in place with hot glue. Brush with 3d lacquer.

Large pink fillers:- Stamp x2 the large spray fillers onto white stamping card using northern pine ink for the leaves and rose bud for the flowers, use the water brush to colour the pink flowers with rose bud ink, diecut. Use the daubers to add shading to the flowers with the rose bud ink and lightly colour the leaves with bamboo leaves ink. Add shape using the flower shaping tools.

Garden lily buds x1: stamp onto white stamping card using northern pine ink for the stem and leaves and rose bud for the buds. Colour the stem and leaf in bamboo leaves ink. Use the water brush and rose bud ink to colour the buds. Die cut. Add northern pine ink to the edges of the leaves and additional rose bud ink to the tips of the buds. Shape using the flower shaping tools.

Garden lily buds: stamp x2 onto white stamping card using northern pine ink for the stem and leaves and rose bud for the buds. Colour the stem and leaf in bamboo leaves ink. Use the water brush and rose bud ink to colour the buds. Die cut. Add northern pine ink to the edges of the leaves and additional rose bud ink to eh tips of the buds. Shape using the flower shaping tools.

Teal filler flowers: Stamp the lush lilacs  x1 onto white card using desert sand ink, die cut and add teala zeal ink to the tips of each petal, place in the shaping mold face down, spritz with water and run through the die cutting machine to shape. Make a hole in the centre of the sets of petals and thread a pastel pearl stamen through the centre of each, secure with dries clear or hot glue. Sponge dries clear adhesive onto the flowers and sprinkle with glitter.

Stamp the large garden lily bouquet onto stamping card using rich cocoa ink, colour the florals using the rose bud ink and waterbrush. Add bamboo leaves ink to the leaves. Die cut, add additional ink to shade and shape using the flower shaping tools.

Position the leaves and flowers to wrap around the sentiment tag and secure with hot glue.

Other Products: 7.75" white square card base, foam pads, hot glue, kraft card, bakers twine

Instructions:

Make a card base  7" x 5" from white cardstock. Cut gold cardstock a little smaller than the card front and cut pattern paper from paper collection a little smaller than the gold card and adhere to the card front.

Cut a die cut from Rectangle Filigree frame die set  in white cardstock and gold card stock. Overlay them together and add to the card front. Add the inner decorative layer die cut and add pattern paper inside this, Use the inner most die 

Stamp the lily flowers with Pink Peony on Deluxe Flower Shaping Paper. Color with Archival inks. Stamp the leaves in olive green ink. Color with leaf green. Shape the flowers in 3D flower shaping mold and with deluxe flower shaping ball tool. Add rock candy stamens.

Stamp the flowers from the Garden Lily bouquet stamp set with Jet black ink on white cardstock. Color with Zig markers and cut with matching die. Arrange the stamped flowers and the lily flowers on the card. 

Stamp the small butterflies in white pigment ink on vellum paper and add white embossing powder. Heat set and cut with matching die. Adhere the butterflies. 

Stamp the sentiment on a circle die cut and add to the card as pictured. 

Add glitter powder on the flowers to finish the card.

Other Products: Scoring board, die cutting machine, hot glue gun, glue sticks, glitter powder.

Instructions:

Cut out the white base of the card and fold it to 8" x 6". Cut a slightly smaller rectangle from the paper collection and glue to the base. Cut a 5 1/2" x 7 1/2" rectangle from the white paper, then cut a slightly smaller rectangle from the paper collection and adhere with Double Dots 100 pc. -3D Foam Circles. 

Cut from white paper the smaller frame from the Rectangle Filigree Frame Die set. Then cut a smaller  frame from the paper collection. Then stamp the sentiment from the Friendship Sentiments set in black ink and adhere with Double Dots 100 pc. -3D Foam Circles. Cover the edges of the frame with glue and sprinkle with glitter

To make lilies, stamp flowers several times with Memento Rose Bud ink, then color them with the Archival Rose Madder ink. Cut with coordinating die. Shape flowers with the Mold from the same collection. Fold the flowers and glue with hot glue. Add glue and add one yellow and a few red stamens in the centers.Then cover the center of the flowers and the stamens with a brush with yellow ink.

To make the leaves, stamp several times the leaves from the Garden Lily and Garden Lily Bouquet & Buds and Garden Lily Spray & Fillers with Memento Olive Grove ink. Cut with coordinating dies. Color the flowers with a pink watercolor pencil. Color the leaves with Archival ink Olive. Form the leaves with the Mold from the same collection.

Glue everything as shown. Cover the flowers with glue and sprinkle with glitter.

Other Products: Cutting machine, paint brush, hot glue, watercolor pencil

Instructions:

Create a top fold card measures 5 1/2”x 7 1/2”.  Choose a designer paper from Garden Lily Paper Collection and cut it to the size 5 1/4”x 7 1/4”. Adhere it on white card base. Choose another designer paper from the same Paper Collection and cut it to the size 5” x 7”. Now, mat this paper on Luxe Gold Card stock making a delicate border of 1/16” on all four sides. Adhere this pannel on ready card base using foam tape.

Cut two pieces of decorative border from white card stock using border die from Delicate Daisy Corner & Border Die. Glue them together for extra strength and adhere it to the card as shown. Using Filigree Border & Accents Die, cut out the corner die from Luxe gold card-stock and glue it to the card front as shown.

Stamp the flowers and leaves from the Garden Lily cling stamp set on Deluxe flower shaping paper using Magenta Hue archival ink and Sunflower archival ink for flowers and Olive archival ink for leaves. Now color the flowers by using Leaf Green archival ink in the center and Magenta Hue and Sunflower archival ink on the petals. Color the leaves using Leaf Green archival ink and Bamboo leaves memento ink. Cut the flowers and leaves using their coordinating dies and shape them using the coordinating 3D shaping mold. Now add green stamens from Petite Pollen Stamens to the centre of flowers.

Die cut a tag from Garden Lily paper collection using a die from Ornamental Tags die set. Stamp a sentiment “for my Friend” from Just For You Sentiments cling stamp set using Versamark ink and heat emboss it using golden embossing powder. Stamp the butterfly image from Floral Butterfly Accents Cling Stamp Set with versamark ink on Rajni Chawla’s Vellum Flowerite and sprinkle white heat embossing powder. Dust extras and heat set the image using a heat tool. Cut the butterfly using its coordinating die. Shape the butterfly.

Once all the elements are ready, decorate the card using prepared flowers, leaves and butterfly as shown. For final look, apply Crystal Clear powder to the flowers and leaves using Art glitter dries clear glue.

Other Products: Die Cutting Machine, Score Board, Bone Folder, Smooth White Cardstock, Scissors, Rangers White Heat Embossing Powder, Heat gun, VersaMark ink.

Instructions:

Cut a piece of white cardstock to 6 14/16 x 6", score at 2 3/4" and fold to get a base. Cut out 3 pieces of paper from the Garden Lily Paper Collection 2 pieces to 2.5 x 5 3/4" and the third to 3 15/16 x 5 3/4", adhere them to the base. Cut out white and gold border from the Filigree Border & Accents Die and adhere them to the base as pictured. Stamp the sentiment from the Elegant Rose Sentiments Stamp Set in Cactus Flower ink and cut out with coordinating die. Cut out a white small heart with the Decorative Heart Die. Adhere the heart and the sentiment inside of the card.

Stamp a lily cluster from the Garden Lily Bouquet & Buds Cling Stamp Set in Tuxedo Black ink, color it and cut out with coordinating die. Stamp blossoms from the Garden Lily Cling Stamp Set in Cactus Flower and Buttercup inks onto Deluxe Flower Shaping Paper, color their edges with the same inks and their centers with the Buttercup and Sunflower inks, diecut with coordinating dies and shape with mold. Add Petite Pollen Stamens to all lilies. Stamp blossoms from Lush Lilac Stamp Set in Cactus Flower ink onto Deluxe Flower Shaping Paper and diecut with coordinating die. Shape them with Deluxe Flower Shaping tools and add some Minnie Pearls Prills. Stamp 5 leaves from the Garden Lily Cling Stamp Set in Fern Green ink, color them with Leaf Green ink, diecut with coordinating dies and shape with mold. Stamp 4 branches from Holly Berry Spray Cling Stamp Set in Fern Green ink and cut out with coordinating die. Stamp 2 lilies from the Basket Blooms Cling Stamp Set in Tuxedo Black ink, color them and cut out with coordinating die. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers. Add some self-adhesive crystals.    

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, sisal, colored pencils, self-adhesive crystals

Instructions:

Cut a piece of white cardstock, score and fold to get a 8 3/16 x 5 11/16" base. Cut a piece of paper from Garden Lily Paper Collection to 8 1/16 x 5.5", the other one to 7.5 x 4 3/4" and a little bigger piece of the white cardstock. Adhere them to the base. Cut out white and a gold frames from the Oval Filigree Frame Die. Stamp the sentiment with the Friendship Sentiments stamp in Cactus Flower ink and cut it out with the smallest oval from the Oval Filigree Frame Die Set. Adhere all elements to the base.

Stamp blossoms from the Garden Lily Cling Stamp Set in Cactus Flower ink onto Deluxe Flower Shaping Paper, color their edges with the same ink and their centers with the Sunflower ink, diecut with coordinating dies and shape with mold. Add Petite Pollen Stamens to all lilies. Stamp small blossoms from the Hollyhock Petals & Leaves Cling Stamp Set in Sunflower ink, diecut with coordinating dies and shape with mold, add Minnie Pearls prills. Stamp 7 leaves from the Garden Lily Cling Stamp Set in Fern Green ink, color them with Leaf Green ink, diecut with coordinating dies and shape with mold. Stamp 3 lily buds from the Garden Lily Bouquet & Buds Cling Stamp Set in Fern Green ink, color them and cut out with coordinating die. Stamp leaves from Holly Berry Spray Cling Stamp Set in Fern Green and diecut with coordinating dies. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers. Add some self-adhesive crystals.    

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, sisal, colored pencils, self-adhesive crystals

Instructions:

The ready top-fold slimline card from smooth cardstock measures 8 1/2" by 4 1/2". To prepare the card base, cut the paper measuring 8 1/2" by 9" and score at 4 1/2" on 9" length and crease well.

For the card front, choose the pattern paper from the Garden Lily collection and cut measuring 8" by 4" and frame it by adding a golden panel cut from Luxe gold cardstock, creating a border of 1/16" on all the sides. Layer the panel on the card front using glue dots or dimensional tape. 

Next, cut the Filigree Accents Die twice, back to back on smooth white cardstock glue gold die cut on the bottom a little off-center to create the shadow. Layer this die cut on the card front using foam dots. 

Stamp the images from Garden Lily Spray & Fillers Cling Stamp Set on smooth white cardstock with black archival ink and paint them using Zig Clean Clear Markers. Cut the images using their coordinating dies and glue 1 or 2 extra die cuts to add strength. Layer the ready-painted bouquet on the ready-card front on the right side as shown. 

For white vellum Lilies, Stamp the flowers on Vellum Flowerette cardstock using Hero Arts white pigment ink and sprinkle white heat embossing powder. Dust extras in the funnel tray and heat set the flower petals. Cut the petals using its coordinating die. Color the petals using Peeled Paint distress Oxide and shape them using flower shaping tools. Form the flowers and prick the center to add Petite Pollen Stamens - Medium. Prepare 2 medium flowers of 3 petals each. Also, white heat emboss the butterfly from Small Floral Butterfly Cling Stamp Set in the same way and cut it using its coordinating die. Color it using Wild Honey Distress Oxide. Shape the butterfly a little with a needle tool for extra dimensions.  

Stamp, color, and cut a few Wisteria flowers using Orange Blossom Archival ink, color them in the center using the same ink and shape them using a flower shaping kit. Add flower beads using a glossy accent and use these flowers as fillers.

Stamp 2 sets of leaves using Leafy Accent stamp and Olive Green Archival ink and cut them using its coordinating die. Color the leaves using the same inks and shape them using a deluxe flower shaping kit. Once, all the elements are ready, assemble the card as shown and complete the card by adding a sentiment strip from the Just For You Cling Stamp Set. 

Other Products: Die Cutting Machine, Score Board, Bone Folder, Smooth White Cardstock, Scissors, Smooth White Cardstock, Double Sided Tape, Flower Seeds, Glossy Accent, Tacky Glue, Hero Arts White Pigment Ink. Funnel Tray, and Heat Gun

Instructions:

Cut Deluxe Flower Shaping paper to 8 1/2 x 5 1/2" size, score and fold at 4 1/4". Using from the HCD2-7381 Fancy Classic Oval Frame Die, diecut the plain oval from the front panel of card base. Diecut the coordinating size decorative oval from white cardstock and another one from coral cardstock. Cut the bottom left 6 x 6" panel of sheet 10A in the Garden Lily paper collection to 5 1/2 x 4 1/8". Attach this panel to the inside of card base. Stamp the ‘Thinking of You’ sentiment through center of oval opening onto inside of card in Viridian ink. Stamp the small lily from HCPC-31012 Garden Lily Spray & Fillers Cling Stamp Set onto the top and bottom of card base corners next to oval as shown. For the lily, stamp off in Rose Madder ink onto scrap paper and then in Pink Peony ink onto the card. Clean the stamp, and then stamp in White pigment ink onto the corners and emboss with Bridal embossing powder. Sponge the inside edges of oval and outer edges of card with Pink Peony ink. Also lightly sponge Viridian ink around the oval to create a dimensional shadow. Add a touch of the Sunflower ink onto the lily centers in the corners. Lightly sponge the coral decorative oval with white ink and emboss with Bridal embossing powder. Lightly sponge the white oval with Pink Peony ink. Layer the white decorative oval onto the coral oval at an offset. Use a scissors to cut out a portion of the decorative oval as pictured. Attach the decorative oval into opening of card, using hot glue to attach on the inside. Cut the little strip from bottom left sheet 10A of the paper collection, one at 1 1/2" and one at 2 1/2", then attach onto top left and bottom right of oval as shown. 

Stamp 2 of the lily spray from HCPC-31012 Garden Lily Spray & Fillers Cling Stamp Set in a combination of Sunflower and Leaf Green ink for the leaves and Rose Madder and Sunflower for the lily buds onto Flower Shaping paper. Stamp 2 of the large set of lily petals and 1 of the small lily petals in Rose Madder ink. 

Sponge the leaves with Leaf Green and Viridian. Use Pink Peony and Rose Madder on the lily buds. For the lily petals, use the Pink Peony on the backsides of all the flowers. Use the same on the front center of petals, then add a touch of Sunflower ink. Then add some Rose Madder over the areas with Pink Peony. Use a yellow sponge to apply a light film of Crystal Lacquer over the lilies and let dry. 

Shape the lily petals using the Garden Lily shaping mold. Use the shaping stylus from the Deluxe Flower shaping kit to shape the lily sprays. Use hot glue to attach the lily sprays onto the top left and bottom right of oval. Assemble the lilies together using hot glue. Form one of the petals into buds. Add a touch of Sunflower ink over the brown petite stamen. Thread these through the centers of the two lilies. Attach the lilies onto the card as shown. 

Use the Dries Clear glue to add a sparkle of Mustard glitter in flower centers and on rest of card as desired. 

Other Products: Coral Cardstock, Art Institute Mustard Ultrafine Glitter, Hot Glue, Hot Glue Gun, Funnel Tray, Scissors, Paper Trimmer, Diecutting Machine

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 10” x 7”, score at 5” along the long side and fold to create a base card of 5” x 7”. Cut a piece of gold cardstock 5” x 7” and adhere to the front of the paper. Cut a piece of pattern paper 4 7/8” x 6 7/8” and adhere to the front of the card.  

Die cut the outer frame using the No. 1 die from the HCD2-7381 Fancy Classic Oval Frame Die from pattern paper. Die cut two plain outer dies from cardboard and adhere together and then adhere the pattern paper to the front and adhere to the front of the card.

Die cut two decorative frames using the No. 2 and No. 3 die from the HCD2-7381 Fancy Classic Oval Frame Die - one from gold cardstock and one from Deluxe Flower Shaping Paper. Adhere the gold frame over the white frame and adhere to the front of the card.  Die cut an inner oval from pattern paper using the No. 3 die from the HCD2-7381 Fancy Classic Oval Frame Die and adhere to the centre of the frame.

Stamp the bow and basket and handle image from the HCPC-31008 Wicker Basket using gold ink on watercolour paper and heat emboss with gold embossing powder. Colour with watercolour paints and die cut with the coordinating dies. Adhere the basket and handle to the centre of the card with foam tape and strips.  Adhere the bow to the top of the handle.

Stamp the small floral images and fillers from the HCPC-31012 Garden Lily Spray & Fillers the Cling Stamp Set and HCPC-31013 Garden Lily Bouquet & Buds Cling Stamp Set using gold ink on watercolour paper and heat emboss with gold embossing powder. Colour with watercolour paints and die cut with the coordinating dies. Adhere the floral images to the basket as shown using foam tape for dimension. Add a small filler to the bottom left of the basket as shown.

Stamp the leaf images from the HCPC-31011 Garden Lily Cling Stamp Set in English Ivy ink on Deluxe Flower Shaping paper. Colour with Leaf Green and Olive inks and die cut with the coordinating die. Colour the backs of the leaves with Leaf Green ink and shape using the coordinating mold. Adhere to the bottom right of the basket and frame.

Stamp the leaf flourish from the HCPC-31012 Garden Lily Spray & Fillers Cling Stamp Set in English Ivy ink on Deluxe Flower Shaping Paper. Colour with Leaf Green ink and Olive inks and die cut with the coordinating die. Shape and trim and adhere to the bottom right of the leaves.

Stamp the flower images from the HCPC-31011 Garden Lily Cling Stamp Set in Rose Madder ink on Deluxe Flower Shaping Paper. Colour the centres of the flowers with Leaf Green ink and the petals of the yellow flowers with Pink Peony and Rose Madder inks and die cut with the coordinating dies. Colour the backs with Pink Peony  ink and shape using the coordinating molds. Assemble the flowers using two of each petal and pierce the centres of the flowers. Colour the white stamens with Fresh Lemon  ink and use one yellow and three green stamens to insert in the centres of the flowers and adhere using Dries Clear glue. Adhere over the leaves as shown. Adhere a painted filler to the leaves and flowers.

Stamp the butterfly image from the HCPC-3953 Small Floral Butterfly Cling Stamp Set in Versamark ink on vellum and heat emboss with gold embossing powder. Adhere to the top left over the frame as shown.

Stamp the sentiment from the HCPC-31007 Friendship Sentiments in Obsidian Pigment ink on light green pattern paper.  Die cut the sentiment using the round tag die from the HCD1-7203 Ornamental Tags die and adhere to the bottom right using foam squares under the flowers as shown.

Inside Card: Cut a piece of gold cardstock 4 7/8” x 6 7/8" and adhere to the inside back of the card. Cut a piece of pattern paper 4 3/4” x 6 3/4” and adhere to the front of the gold card. Die cut a decorative frame out of Deluxe Flower Shaping Paper using the No. 2 die from the HCD2-7381 Fancy Classic Oval Frame Die. Die cut a frame using the No. 2 and No. 3 die from the HCD2-7381 Fancy Classic Oval Frame Die out of gold cardstock and adhere to the white frame. Stamp the sentiment from the HCPC-31007 Friendship Sentiments in the centre of the frame using Obsidian Pigment ink using a stamp positioner and then adhere to the centre of the inside back.

Other Products: Altenew Artist Watercolour Paints, Altenew Watercolour Paper, Altenew Obsidian ink, Fresh Lemon ink, Versamark ink, foam tape, clear gloss gel medium, paint brush, foam squares

Instructions:

Cut a piece of white cardstock to 7 1/4” x 9 1/8” and score in half at 3 5/8” to form a left fold slimline card base. Using the HCD3-7432 Slim Basic Rectangle Die use the largest die to cut a piece from Sheet 4B from the HCDP1-2147 Garden Lily Paper Collection. Using the HCDA1-449 Stack & Store Daubers ink the edges with Olive Archival Ink. Using the second largest die from the Slim Basic Rectangle Dies cut a piece from sheet 4A and do the same inking with the edges. Attach both of these layers to the front of the card base using Dries Clear Adhesive. Next, using the HCD3-7435 Curvy Accent Border Die set create a double layer accent border as shown using both Luxe Gold and White Cardstock. Glue this beautiful edge to the left hand side. Next take the HCD2-7371 Letters and Numbers Die Set to create the sentiment by cutting the smaller letters in both gold and white. Layer them by slightly offsetting them to coordinate with the border. This is a wonderful way to customize a sentiment perfectly for the occasion. 

Using the  HCPC-31011 Garden Lily Cling Stamp Set stamp the small lily 1x and the medium/large lily 2x onto Deluxe Flower Shaping Paper with Peony Pink Archival Ink. Next stamp the Leaf Stamp 3x in Olive Archival Ink. Cut out using the coordinating die sets. Color the centers lightly with Rose Madder Ink and with the triangle tip of the dauber, color the detail line on the flowers by pulling the color towards the tip. Lightly edge the flower petal as well. Color the leaves with Leaf Green and Olive Archival Inks. Now shape all the flowers and leaves with the coordinating 3D Shaping Mold. Then using both the Deluxe Flower Shaping Tool Set and Golf Tools shape your flower after spritzing them from the back with water and finish hand shaping. Poke a hole with a golf tool and add in 4-5, HCS1-499 Petite Pollen Stamens - Medium making sure to secure them with hot glue. Lastly add Dries clear glue to the petals and generously add Rajni Chawla’s Crystal Clear Glitter. For the Filler Flowers the HCPC-3906 Small Wild Rose Cling Stamp Set was used. It was stamped and lightly colored in Goldenrod Archival Ink and the centers were colored in Bright Tangelo. They were die cut with the coordinating dies and shaped in the coordinating 3D Shaping Mold. Go Mango Prills were added to the centers to finish them off. 

Using both of the HCPC-31012 Garden Lily Spray & Fillers Cling Stamp Set and the 
HCPC-31013 Garden Lily Bouquet & Buds Cling Stamp Set stamp numerous foliage pieces in Leaf Green Archival Ink and color using a mixture of Sunflower, Vivid Chartreuse, and Leaf Green. Using a Hydra Sponge Coat with a layer of Dries Clear Glue and cover with Crystal Clear Glitter and allow to dry. 

To assemble, layer the glittered Garden Lily Sprays and Fillers down first toward the bottom left corner of the card, followed by the shaped leaves leaving a couple out to add in after the flowers are glued down. Arrange the flowers and glue down using a glue gun with hot glue. Add in extra leaves or foliage as desired until the final desired look is achieved. Complete the inside with designer paper and the corner accents cut from Luxe Gold cardstock using the Filigree Border & Accent Die.

Other Products: Water Spritzer, Glue Gun, Glue Sticks, Scissors, Paper Trimmer, Die Cut Machine

Instructions:

To make a 9 1/2" x 4" card, cut a 12" x12" sheet of white card to 8" x 9 1/2". Score and fold at the 4" mark on the 8" side. Cover with yellow paper from the Garden Lily Paper Collection.

Die cut a Slim Lattice Oval Die in white card. Cut a piece of flowery paper from the paper pad to 3 1/4" x 8", (the same size as the Slim Lattice Oval Die). Adhere the Slim Lattice Oval die cut piece, to the flowery paper. Die cut a Slim Eyelet Rectangle Die, second size down, (8 1/2" x 3 1/2") in yellow paper. Adhere the Slim Lattice piece with the flowery background to the yellow eyelet rectangle. Cut a piece of pink paper from the paper pad to 8 1/2" x 3 1/2". Adhere the yellow paper to the pink paper, adhere to card front.

Stamp onto Deluxe Flower Shaping paper using Ranger Archival Olive ink, the Garden Lily Spray & Fillers from the Garden Lily Spray & Fillers Cling Stamp Set. Stamp one spray, two long fillers and four small filler flowers. Color with Olive and Ranger Archival Rose Madder inks using Daubers. Die cut with the matching dies. Lightly shape on the reverse, with the stylus from the Deluxe Flower Shaping kit.

Stamp two Garden Lily Buds from the Garden Lily Bouquet & Buds Cling Stamp Set in Olive ink. Color with Olive and Rose Madder inks using Daubers. Die cut with the matching dies. Lightly shape with the stylus from the Deluxe Flower Shaping Kit.

Stamp two sets of  Garden Lilies from the Garden Lily Cling Stamp Set in Rose Madder ink. Stamp the leaf from the same set in Olive ink. Color the Lilies lightly with Rose Madder ink, using a Dauber. Color the leaves in Olive ink using a Dauber. Place in the Garden Lily Flower Shaping Mold, lightly mist with water and run through a die cutting machine. Repeat for the yellow Lilies. You will need five Rose Madder Lilies and four yellow Lilies in various sizes. Pierce holes in the centers, thread through pink and yellow Beaded Stamens with white Rock Candy stamens. Add Dries Clear Glue and offset the petals as you go.

Adhere two Garden Lily long Sprays to top and bottom left side of the card. Adhere the small Garden Lily Spray Bouquet between the two Lily Sprays. Start adhering the Lilies using hot glue. Adhere the Leaves, Fillers and Buds around the Lilies. 

Stamp a sentiment from the Special Birthday Sentiments Cling Stamp Set onto white card. Die cut with a tag from the Ticket and Tags Die Set. Adhere to card. Sponge Dries Clear Adhesive over the flowers and leaves, add clear glitter. All done.

Other Products: 12" x 12" white card, white card, score board, die cutting machine, water mist bottle, paper piercer, hot glue, clear glitter.

Instructions:

Create a 5 x 7 inch card base in white cardstock. Cut a 4.5 x 6.5" piece of pale blue flowered paper from the Garden Lily Paper Collection, distress with French Ultramarine and adhere to card front. Cut the frame from the Fancy Classic Oval Frame Die out of pale blue paper, distress with French Ultramarine and adhere with foam tape to card front. Cut the decorative die in white card stock and adhere. Cut out the center oval in pale blue flowered paper, adhere to the center with foam tape. Cut out the inner decorative die in white cardstock and adhere.

Stamp the lilies from the Garden Lily Cling Stamp Set in Vibrant Fuchsia, sponge with Sunflower, Coastal Coral and Vibrant Fuchsia, cut out with coordinating dies and sculpt with the Garden Lily Shaping Mold, add stamens and glitter.

Stamp the leaves from the Garden Lily Cling Stamp Set, the lily sprigs from the Garden Lily Bouquet & Buds Cling Stamp Set, and the lily vines from the Garden Lily Spray & Fillers Cling Stamp Set in olive and sponge with Coastal Coral, Vibrant Fuchsia and Leaf Green, cut out with coordinating dies, sculpt with stylus and add glitter.

Stamp the sentiment from the Thank You Sentiments Cling Stamp Set in Jet Black on white cardstock and cut out with the Arrows and Banner Die.

Adhere flowers, foliage and sentiment as shown.  

Other Products: White card stock

Instructions:

Its a ready folded card measuring 9 1/4" by 6", cut a panel on designer paper from Garden Lily Paper Collection which is slightly smaller than card base, adhere it using clear glue.

Trim a panel on deluxe card and die cut the edge using Curvy Decorative Border Die Set, trim designer paper and add on the panel using same border line die from the set, add this layer on the card base using dimensional tape.

Die cut the circle shape border on the deluxe card and add this border as shown using clear glue.

Stamp the Buds, leaves & fillers from Gargen lily Bouquet & Buds Stamp Set & Garden Lily Spray & Fillers Stamp Set on Deluxe Paper Using Leaf Green ink color the fillers with Pink Peony Ink, Vivid chartreuse Archival and Mowed Lawn Distress Ink Using Daubers. Shape from back using shaping kit, cover with clear glue and magic glitter.

For the Lilies stamp the flower images using Rose Madder Ink on the yellow cardstock, die cut using coordinating dies, color the centers with Vivid Chartreuse and edges with Pink Peony using daubers, shape the flowers in shaping mold, finish shaping using shaping kit, make few flowers using hot glue. Make a hole in the centers, add stamens using hot glue, apply clear glue on the flowers add dress with Nida Tanweer Magic Glitter Powder.

Stamp the sentiment on deluxe flower shaping paper using Elegant Rose Sentiment Stamp Set with leaf green ink, die cut using coordinating die, add extra layer underneath for the sturdiness.

Add fillers, twine, lace and leaves as shown using hot glue and make a bunch of lilies in the center, add sentiment using clear glue.

Embellish the card with Rhinestones, decorative beads, Crystal Laquer and Nuvo Drops.

Other Products: Yellow Cardstock, Round Pearls, Art Pebble, Nida Tanweer Magic Glitter Powder, Decorative Beads, Hot Glue Gun, Mowed Lawn Distress Ink, Rhinestones, Twine, Lace.

Instructions:

Score a 11" x 4 1/4" piece of deluxe flower shaping paper at 5 1/2" and fold to create a top folding 5 1/2" x 4 1/4" card base. Emboss a same sized piece of white cardstock using Tim Holts Bricked Embossing Folder and adhere it on the card base.

Stamp the image from Garden Lily Bouquet and Buds Cling Stamp set on a piece of watercolor cardstock with Jet black archival ink and die cut it using matching die from Garden Lily Bouquet and Buds Die. Color it using Altenew watercolours. Adhere it on the card base as shown with double sided foam tape. 

Stamp the sentiment from  Elegant Rose Sentiments Cling Stamp set on a piece of white cardstock with Jet black archival ink and die cut it using matching die from Elegant Rose Sentiments Die. Die cut 3 more pieces of white cardstock using the same die. Fussy cut the sentiment part and adhere all the pieces. Adhere it on the card base as shown. Add few clear droplets around the sentiment to add finishing touch.

Other Products: Altenew Watercolours, Canson 300 gsm Watercolor cardstock, Brustro Green Gold Brush, Tim Holts Bricked Embossing Folder , dress my craft clear droplets and double sided foam tape.

Instructions:

My finished card size is 4" x 8".  Make card base out of white cardstock and cut the front panel at 2".  Cut a white piece of cardstock 2" x 8" and emboss it with the embossing folder. Cut the decorative die out of white cardstock and glue to the edge of the 2" front. Glue the embossed strip onto the card front.

I used a piece of Sheet #3A of the paper collection to cover the inside panel of the card. This will show behind the decorative front of the card.

Stamp the leaves in Sap Green and color with Sap Green and Goldenrod. Cut out with coordinating die. Lay onto the shaping mold, spritz with water and run through the die cut machine. Turn out onto the desk to dry. Once dry, use the Golf Tool to poke a hole in the center of the petals and feed through the stamen using hot glue to adhere to the petal.  I also used the hot glue to add some more shaping to the petals. Allow to dry.

Stamp the leaves in leaf green and color with same then cut out with coordinating die. Edge with Olive ink and lay onto the shaping mold. Spritz with water and run through the die cut machine. Allow to dry.

Decide on placement of the flowers and leaves and hot glue down.  The card is finished.

Other Products: Archival Sap Green Ink, White Cardstock, Die Cut Machine, Hot Glue Gun

Instructions:

Card size 8.75” x 3.875” (final size). Take pattern paper from HCDP1-2147 Garden Lily paper Collection, adhere it using designer dries clear adhesive. Cut one HCD3-7431 Slim Eyelet Rectangle die on luxe gold cardstock and adhere it on card base using designer dries clear adhesive.

Now cut one HCD3-7432 slim basic rectangle die on HCDP1-2147 Garden Lily paper Collection and adhere. Cut one strip of white cardstock size 8.25” x 1.25”, adhere it using designer dries clear adhesive.

Cut one die from HCD3-7434 Delicate Daisy Corner & Border Die on white cardstock and the base die on luxe cardstock, adhere them as shown. Stamp sentiment using archival ink-english ivy.

Stamp some Lily Petals and leaves from HCPC-31011 garden Lily Cling Stamp Set using archival ink-sunflower, leaf green and english ivy. on deluxe flower shaping paper, cut them with coordinating die HCD1-7439 Garden Lily Die. Colour them using archival ink-leaf green, sunflower and magenta hue on the edges for small lily flowers, shape them using HCFB1-5013 3D Garden Lily Shaping Mold. Add HCS1-499 petite pollen Stamen-Medium and crystal clear glitter.

Stamp lily spray from HCPC-31012 Garden Lily Spray and Fillers Cling Stamp Set using encore Ultimate Metallic Ink-gold on white cardstock, sprinkle gold embossing powder and heat it using Heating tool.

Arrange all leaves, flowers and spray as shown.

Other Products: Big Shot Plus Machine

Instructions:

Card size is 5 x 7”. Score and fold 10 x 7” white cardstock at 5” to create the side fold card base. Using the Filigree Border & Accents Die, cut the edge of the card front. Sponge the decorative edge and the top and bottom edges of the card front with dries clear adhesive and sprinkle with Rajni Chawla’s Crystal Clear glitter. Cut sheet 6B from the Garden Lily Paper Collection to 4 7/8 x 6 7/8”, sponge the edges with Coastal Coral ink and adhere to the inside of the card. Stamp the ‘Thinking of You’ sentiment from the Just for You Sentiments Cling Stamp set on white cardstock using Tuxedo Black ink and diecut using the Album Tags and Accents Die. Diecut the larger eyelet die, adhere the two together and adhere to the inside of the card. Cut white cardstock 4 1/8 x 6 7/8”, dry emboss and adhere to the card front using dimensional tape. 

Stamp the Garden Lilies on Deluxe Flower Shaping Paper using Buttercup ink, color using Buttercup and Coastal Coral inks, diecut using the coordinating dies and color the backs of the flowers. Place face down in the 3D Garden Lily Shaping Mold and run through the diecutting machine to shape. Adhere two petals of the same size together, offset, to create each lily. Using the Groove Golf tool, pierce a hole in the flower centers, insert the Petite Pollen Stamens and secure with hot glue. I used the yellow stamens and added a dab of Coastal Coral ink to the tips. Stamp the Garden Lily leaves using Archival Olive ink, color using the same ink, diecut, add more ink to the edges and the back of the leaves and shape in the 3D Garden Lily Mold. 

Using a paint brush, brush the flowers and leaves with watered down dries clear adhesive and cover with Rajni Chawla’s Crystal Clear glitter. Adhere the flowers and leaves to the EZ Stem Floral Wire and add a little glitter to the stems. Adhere the arrangement to the card front as shown using hot glue.

Stamp the ‘For My Friend’ Sentiment from the Just for You Sentiments Cling Stamp set on white cardstock using Tuxedo Black ink and diecut using the banner die from the Arrows and Banner Die set. Adhere to the top of the card front using dimensional Tape. 

Other Products: Diecutting Machine, White Cardstock, Misti, Hot Glue Gun, Funnel Tray, Dimensional Tape, Anna Griffin Slimline Flourish Embossing Folder, Paint Brush

Instructions:

The finished card measure 6 x 6 inches. Cut one piece of white cardstock in deluxe flower shaping paper 12 by 12 inches and score at 6 inches to make a side fold card. Cut a 6 x 6 green paper #11B and glue it on the card base. Also glue on a card base a white paper 5 1/2 x 5 1/2 inches and a yellow paper #6B 5 1/4 x 5 1/4 inches.  Glue with 3D foam a 5 x 5 inch pattern paper #6A and glue it over the card base. 

Stamp your Lily flowers with sunflower ink onto white flower shaping paper, color the center and shade the edge with the same color. You can also color the back of the flowers. Diecut with the coordinating dies. Place face down into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe flower shaping kit tools. Glue 2 layers together. In the center of the flowers make a hole and add stamens.  With a brush add a little bit of 3D crystal lacquer on your flowers. Add glue on the tips of the flowers add dip it into crystal clear powder. Redo the same thing to make other flowers in seagrass ink color.

Also stamp and diecut leaves with leaf green and color the center with a bit of library green ink. Use the mold to give shape to your leaves.

Stamp in leaf green ink sentiments from the Friendship sentiments cling stamp set on a 1 1/2  x 1 1/4  inch piece of Deluxe shaping paper. Ink the edges with the same color. Make a bouquet arrangement on your card and add the sentiment on the corner with 3D foam. 

For the final touch, add lace, ribbon and stamens through your bouquet.

Other Products: Die cutting machine Cut’n’boss, heat gun, water mister, hot glue gun, hot glue, scissors, cheesecloth, sewing thread, ribbon, lace, seagrass archival ink, library green archival ink

Instructions:

I used patterned paper sheet 1B for the background of my 12 x 12" layout. Using the swirly fern image and an embossing pad. Stamp the image diagonally across the layout and add gold embossing powder, then heat set. 

Die cut out the Oval Filigree Frame Die pieces from white cardstock. Snip them in half. Mat the photo in white cardstock and add gold photo corners to the photo. Adhere the photo to the right hand side of the layout using 2 layers of foam tape. Add the outside die cut pieces above and below the matted photo using liquid adhesive. Add the middle sections above and below the matted photo using foam tape. 

Stamp and die cut 2 of each of the remaining stamp images onto white cardstock using an emboossing pad and gold embossing powder. Add color to the images using Zig Clean Color Markers and a water brush for a very light and watercolour style look (Light Carmine, Light Green). Adhere the floral images to either side of the matted photo using foam squares. I added gems to the middles of the flowers. Add a few pearls around the floral clusters for a little more sparkle and shine.

Other Products: Water brush, Embossing Pad, Gold Embossing Powder, Cardstock- White, Gems, Pearls, Heat Gun, Scrapbook Adhesives by 3L (Creative Photo Corners Gold, 3D Foam Squares, Thin 3D Foam Squares, Crafty Foam Tape, E-Z Runner Ultra)

Instructions:

Cut a piece of white cardstock 10” x 7”, score at 5” along the long side and fold. Place the outer Majestic Swirl Frames Die over the folded card with one edge slightly over the folded side and die cut to create the shaped card. Cut single piece using this same die from patterned paper and place into card using Designer Dries Clear Adhesive. Die cut an outer frame from silver Cardstock and paper collection glue it together and make sure to offset them. Add to the front of the shaped card using Adhesive Foam Strips. Die cut the inner frame from silver cardstock. Cut patterned paper to fit in the middle,stamp sentiment using Elegant Rose Sentiments Cling Stamp Set with Ranger Archival Ink Pad - Jet Black and sprinkle with Cosmic shimmer Embossing powder - Black Mirage and heat up to melt powder using heating tool. Place into card using Adhesive Foam Strips.

To create Lily flowers, stamp Garden Lily Cling Stamp Set on white paper with Ranger Archival Ink Pad - Majestic Violet and cut using the coordinating dies. You will need 2 bigger and one smaler petals of each to create flowers for bigger flower use the biggest stamp, for smaller flower use smaller size stamp. Colour the flower with Ranger Archival Ink Pad - Majestic Violet using a sponge dauber. After colouring, place the flowers into the mold and run through cutting/embossing machine. Pierce the center and glue in some stamens using hot glue gun. Add a little hot glue to the underside of the flower. Add dries clear adhesive around flower stamen. Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

To create leaves, stamp the Garden Lily Cling Stamp Set and on the white paper with Ranger Archival Ink Pad - Leaf Green, cut out with the coordinating die, shade use this same ink and shape. Shape leaves using mold. Sponge the leaves with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine,

Instructions:

To create the card base, cut 2 pieces of Blue cardstock with sizes 9 1/2 x 7 inches and 9 x 7 inches. Score and fold at 1/2 inch along the longer edge of the bigger piece and adhere the 2 pieces along the flap to create a top-fold card base of 9 x 7 inches in size. Cut 2 pieces of Ivory cardstock measuring 1/8 of an inch less than the card base, sponge the edges with Cactus Flower ink and adhere to the front and inside panels. 

Using sheet 5B from HCDP1-2145 Friendship Rose Paper Collection, cut 2 pieces each with size 8 3/4 x 6 3/4  inchesand adhere to the front and inside panels. Using HCD2-7399 Flourish Companion Frame Die set, cut 4 pieces of the corner die with Ivory cardstock and adhere them on all the corners of the inside panel. 

Use HCD3-7433 Slim Lattice Oval Die to cut 4 pieces each with Ivory cardstock, stack 2 each and adhere them on the card front using dimensional tape as shown. Using HCD2-7399 Flourish Companion Frame Die set, cut 1 piece each of the inner rectangle frame with Ivory cardstock and the mat layer using sheet 7B. Sponge the edges of the mat layer with Cactus Flower ink, adhere the Ivory frame die-cut piece on the top and add this to the card center using dimensional tape as shown. Add the sentiment to the center of this stamped with Cactus Flower ink. 

Stamp a few images of the flowers from HCPC-3999 Hollyhock Petals & Leaves Cling Stamp Set on flower making paper with Cactus Flower ink and color them using Rosey Posey and Paradise Teal inks. Stamp few of the leaf images from HCPC-3835 Leafy Accents Cling Stamp Set on flower making paper with Fern green ink and color them using the same ink. Die-cut the images using their coordinating dies, shape them using the flower shaping tools and add crystal clear glitter by sponging some dries clear glue on the edges. 

Add stamens for the flower centers. Arrange the ready elements on either side if the sentiment and adhere them using hot glue. To finish off the card, add some small Unicorn beads around the flower arrangement.

Other Products: Blue cardstock, dimensional adhesive, hot glue, hot glue gun, funnel tray, scissors, paper trimmer, scoring board, die cutting machine, Ivory cardstock, Rosey Posey Archival ink, small unicorn beads