Instructions:

Cut Deluxe Flower Shaping paper to 12 x 6" size, score and fold at 6" to create card base. Cut a piece from sheet 5B of the Friendship Rose Paper Collection to 5 7/8 x 5 7/8" size. Sponge the edges with Magenta Hue ink and attach onto card base. Cut the top right 6 x 6" panel from sheet 10A of the paper collection. Cut the left decorative side of panel to 2 1/4" width, then cut it to 4" length from the top, leaving the other piece of the section at 2". Cut a 2 3/8 x 5 11/16" size panel from the white cardstock. Sponge the edges of the decorative paper pieces with Magenta Hue and then attach the two pieces onto the cardstock, overlapping the shorter piece on top of the longer one.

Diecut the HCD2-7430 Decorative Heart Die twice from Deluxe Flower Shaping cardstock. Layer these two on top of each other for sturdiness. Diecut the two of the decorative hearts from the same cardstock again, this time using only the inside 2 die pieces together to create the white border hearts. Diecut another border heart, this time from Luxe Gold cardstock. Diecut the scalloped heart piece from burgundy paper sheet 6B from the paper collection. Layer the one of the white border hearts onto the burgundy scalloped heart. Layer the other white border heart onto the gold one, offsetting it so the gold shows through a bit. Sponge the outer and inner edges of the white border heart with Magenta Hue and Lighthouse ink. Use hot glue to layer the white/gold border heart on top of the burgundy one. Build up the layer of glue so that there is about 1/4" of dimension in between the heart layers.

Stamp the rose heart from HCPC-31005 Friendship Rose Heart Stamp Set in Jet Black ink onto Deluxe Flower Shaping cardstock and diecut with the coordinating die. Stamp the ‘Sending you a hug’ sentiment in a combo of Magenta Hue & Lighthouse ink onto the cardstock. Fussy cut the sentiment with a scissors and lightly sponge the edges with Magenta Hue ink.

Color the rose heart using the Vivid Chartreuse and Leaf Green ink on the leaves and Pink Peony, Magenta Hue and a touch of Lighthouse on the roses. Use Pink Peony on the little sprays in between the buds. Use the Light Pink Zig marker along with the color blender to add some extra pop of color on the roses. Apply a thin film of Crystal Lacquer over the colored images. Use the shaping stylus from the Deluxe Flower Shaping Kit to shape the roses.

Cut the double layered white decorative heart in half widthwise. Overlap and attach onto card as pictured using hot glue. Attach the patterned paper strip on top using dimensional adhesive and hot glue. Cut apart the rose image and attach onto the dimensional heart. Then attach onto card as shown. Attach the sentiment. To add some more sparkle, apply the Dries Clear glue onto a yellow sponge, dab over card and sprinkle with Mustard glitter as desired.

Other Products: Art Institute Mustard Ultrafine Glitter, Hot Glue, Hot Glue Gun, Dimensional Adhesive, Funnel Tray, Scissors, Paper Trimmer, Diecutting Machine

Instructions:

Cut a piece of white cardstock to 10 x 7", score at 5" and fold to get a base. Cut a piece of dark paper from the Friendship Rose Paper Collection to 6 13/16 x 4 13/16" and a pink one to 6 9/16 x 4 9/16". Cut a piece of dark paper from the Friendship Rose Paper Collection to 5 14/16 x 2,5" and a little bigger piece of white paper. Adhere them to the base. Cut out two white and two silver frames with Decorative Heart Die, adhere them together and cut in half. Adhere them to the base as pictured. Cut out a silver heart with the die No. 2 from the Decorative Heart Die Set. Use the same die set and cut out a white heart with dies No. 2 and 3, dark pink heart with die No. 3 and a sentiment with the die No. 4. Adhere them to the base.

Stamp blossoms from the Hollyhock Petals & Leaves Cling Stamp Set in Vibrant Fuchsia and Pink Peony inks, color their centers with the same ink, diecut with coordinating dies and shape with mold. Add Medium Pastel Bead Stamens and Small Pastel Pearl Stamens to all big flowers and just prills to small flowers. Stamp 2 branches from Leafy Accents Cling Stamp Set in Leaf Green ink, color them, cut out with coordinating die and shape with coordinating mold. Stamp roses from the Friendship Rose Heart Stamp Set and Budding Rose Heart Cling Stamp Set in Tuxedo Black ink. Color them and cut out with coordinating die. Stamp 2 leaves from Summer Wreath Accents Cling Stamp Set in Fern Green ink, color them with the same ink, cut out with coordinating die. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, colored pencils, self-adhesive pearls

Instructions:

My card size is 5 1/2" x 7 1/2". Make card base using the Deluxe Flower Shaping Paper. It is quite sturdy and makes a great card base. Cover with a piece of Sheet 4B of the Friendship Rose paper collection cutting it at 5 3/8" x 7 3/8".

Using the Filigree Companion Frame die cut a piece of Sheet 4A and set aside. Using the decorative frame cut a piece of Luxe Gold cardstock and glue this to the die cut.

Using the Decorative Heart Die, cut three of the decorative hearts, then cut two of the hearts so you can entertwine the three hearts together. Glue down and then trim so the center heart does not have any of the other two dies showing inside the heart opening. Use a hydra sponge to add glue and then glitter to the hearts and set aside to dry. Once dry glue the hearts to the card front. Cut the 'Love' sentiment from Luxe Gold cardstock and adhere in the middle of the center heart.

Stamp the Budding Rose Heart onto white cardstock and use the Prismacolor pencils to color. Cut out using coordinating die and adhere this to the center heart. The card is finished.

Other Products: Die Cut Machine, White Cardstock, Prismacolor pencils: White, PC937 Tuscan Red, PC930 Magenta, PC912 Apple Green, PC911 Olive Green, Odorless Mineral Spirits, Blending Stumps, Dimensional Tape

Instructions:

Cut a 5 x 7" card base from white cardstock. Cut a piece of black cardstock that is 4.75 x 6.75 and a pink patterned paper layer that is 4.5 x 6.5". Adhere these layers together. Using the Decorative Heart Die, cut the large die cut piece from white cardstock and adhere to the card front. Die cut the scallopped heart from red patterned paper, and adhere to the card front using foam tape. Stamp the rose heart onto black cardstock using an embossing pad and white embossing powder, die cut out that image. Adhere to the card front using foam squares. 

Find and cut out the small pink journal block, and stamp the Happy Mother's Day sentiment onto it. Add to the card front using foam squares. Add pearls to the ends of the journal block. Add pearls to the large die cut piece for that finishing touch.

Other Products: Cardstock (White, Black), Pearls, Embossing Pad, White Embossing Powder, Scrapbook Adhesives by 3L (Crafty Foam Tape, 3D Foam Squares, Thin 3D Foam Squares, E-Z Runner Ultra)

Instructions:

Create a Slim Line card by cutting a piece of white card stock 9 x 9 1/2, fold on the 9” side making the card base 4 1/2 x 9 1/2”. Lay a piece of the Friendship Rose paper (4A) on top slightly smaller.

Cut out 2 of the Decorative Hearts die #2 & #3. Glitter the larger one, adhere one on each side of the card. Emboss the smaller heart from the center, add dimensional foam squares to the back and adhere to the center of the hearts.

Stamp the Friendship Rose Heart on white with black ink, color with Prisma Color pencils 912 & 920. Cut out with the coordinating die. Cut 3 more and adhere together Stamp the sentiment in the center, place small foam dots on the back of the colored one and adhere on top of the others. Place foam dots on the back and adhere to the center of the card as shown.

Other Products: Paper trimmer, Die cut machine, Prisma Color pencils, small foam dots, square foam dots, embossing folder,

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 10” x 7”, score at 5” along the long side and fold to create a base card of 5” x 7”. Cut a piece of gold cardstock 5” x7” and adhere to the front of the card. Cut a piece of pattern paper 4 7/8” x 6 7/8” and adhere over the gold cardstock.

Die cut the outer decorative frame using the No. 1 die from the HCD2-7426 Oval Filigree Frame Die out of Deluxe Flower Shaping Paper and adhere to the front of the card. Die cut an oval out of pink pattern paper using the large oval die from the HCD2-7426 Oval Filigree Frame Die and adhere to the decorative die. Die cut a frame out of gold cardstock using the No. 3 and No. 4 dies from the HCD2-7426 Oval Filigree Frame Die and adhere to the front of the pink patterned oval. Die cut two medium size decorative frames using the No. 4 from the HCD2-7426 Oval Filigree Frame Die - one from Deluxe Flower Shaping Paper and one from gold cardstock. Adhere the white die over the gold die slightly offsetting them to allow a glimpse of gold. Adhere to the centre of the frame. Add Frosting Powder to the inner frame decorative edge with Dries Clear glue on a sponge.

Stamp the vase image from the HCPC-3982 Classic Floral Vase Cling Stamp Set in gold ink on gold cardstock and heat emboss with gold embossing powder.  Die cut with the coordinating die and adhere to the front of the card with pop dots.

Stamp the single rose images from the HCPC-31006 Budding Rose Heart Cling Stamp and the HCPC-31005 Friendship Rose Heart Cling Stamp in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Real Brush Markers and die cut with the coordinating dies. Adhere the roses on the card to create a bouquet of roses using foam squares. Add Crystal Clear glitter to the roses using Dries Clear glitter on a dry sponge.

Die cut the sentiment out of gold cardstock using the sentiment die from the HCD1-7203 Ornamental Tags Die. Die cut the backing out of Deluxe Flower Shaping Paper and adhere the sentiment to this.  Adhere to the front of the vase as shown with foam tape.  Make a bow with linen thread and adhere to the top of the tag and finish with a gold gem.

Other Products: Iris cardstock, foam squares, linen thread, Pink Fresh Studios Gold Gems

Instructions:

Card size: 5 x 6 7/8”. Make a shaped card base with a side fold (see video) using the outer die of the Flourished Companion Frame die. Then cut another panel with the outer die from pink decorative paper. Use the outer die and the large decorative die together to make a thin white frame for the card base then glue it on top of the pink paper matching edges.

Splatter the pink paper with white acrylic paint (you can use a toothbrush or similar brush wet with water first to accomplish this). This mimics the Baby’s Breath.

Cut the Decorative Heart from white. Glue the large part onto card without inner hearts. On the smallest heart, stamp the sentiment using Vibrant Fuchsia then glue it to the center of open scalloped heart cut out.

Stamp the Budding Heart using black, die cut then color using copic markers. Pop up the colored heart onto card, be sure not to cover wording. Add pearls around heart edge.

Add white acrylic dots to Baby’s Breath and Diamond Stickles to Roses. When dry, add a small bow. Randomly glitter card base.

Add single pearl halves to card base. Add a strip of decorative paper to the inside of card on the right edges.

Other Products: White cardstock, white acrylic paint, white 1/16th ribbon, pearls, Copic Markers: RV10, RV02, RV13, YG03, YG17, YG23

Instructions:

Make a 6" x 6" square card base using white cardstock. Cut white cardstock measuring 6" x 12" and score at the 6" mark on the longer side. Fold to make a card base  Cut luxe gold Cardstock 5 3/4" x 5 3/4" and adhere on the card front. Cut a frame measuring 5 1/2" x 5 1/2" from the paper collection and add to the card front. Add another piece of pattern paper at the back. 

Stamp the images from the Budding Rose stamp set with Jet Black ink on Deluxe Flower Shaping paper. Colour with Zig real brush pens. Cut with coordinating die.

Cut a piece of white die cut from the Decorative Hearts Die and trim the die cut to fit the card. 

Add the stamped and coloured images on the card around the lacy heart die cut. Stamp a sentiment on a plain small heart and add to the card.

Stamp Rose flower image from the Classic Rose Cling stamp set with Pink Peony ink on Deluxe flower shaping paper. Colour with daubers using the same color. Stamp the leaves using the green ink. Cut all the stamped images using the matching die and shape them in the flower shaping mold. Make roses by following the video. 

Arrange the roses and the leaves on the card using clear glue. Add glitter on the flowers.

Other Products: Die cutting machine, scoring board

Instructions:

For this 12"x 12" scrapbook page, use sheet 11B from the Friendship Rose Collection Paper Pad for the background paper. Top Tip: if you want to save paper, gut the inside of sheet 11B with a paper trimmer, you can save the center piece for later. Take sheet 6A from the paper pad and cut to 11 1/2" square. Adhere to sheet 11B. Cut the left-over piece of sheet 11B to 3 3/4" x 5 1/4".  Adhere a  3 1/2" x 5" photo on top. Die cut the Decorative Heart Die in white card. Remove the center Heart pieces and put to one side. Adhere the Decorative Heart at a slight angle onto the 12" x 12" page. Adhere the matted photo on top.

Stamp the Budding Rose Heart Cling Stamp Set onto Deluxe Flower Shaping paper in Ranger Archival Leaf Green ink. Color with Ranger Archival Leaf Green and Rose Madder inks, using the Daubers.  Die cut with the matching dies. Ink the edges in Ranger Archival Olive ink. Put to one side. Stamp the single Roses from the Budding Rose Heart Cling Stamp Set three times in Leaf Green ink. Color with Leaf Green and Rose Madder inks. Die cut with the matching dies. Put to one side.

Die cut the Scalloped Heart from the Decorative Heart Die set from sheet 10B of the paper pad. Use the Scalloped Heart Die to die cut the Fancy Heart out of the paper that is left over from die cutting the Decorative Heart. Adhere the white fancy Scalloped Heart to the green Scalloped Heart. Adhere the Budding Rose Stamped Heart onto the Scalloped Heart. Stamp a sentiment in Leaf Green ink from the Friendship Sentiments Cling Stamp Set onto the smallest Heart that you put to one side. Ink the edges in Leaf Green ink using a Dauber. Adhere to center of the Budding Rose Heart with foam tape. Adhere all this to side of photo with foam tape.

Make one Extra Large, two Large and one Medium Roses by stamping the Classic Rose Cling Stamp Set with Rose Madder ink onto Deluxe Flower Shaping paper. Color with Rose Madder ink using a Dauber. Die cut with the matching dies. Place in the 3D Floral Basic Flower Shaping Mold and lightly spritz with water. Run through a die cutting machine and tap out. Ink the edges with Rose Madder ink using a Dauber. Lightly shape on the reverse with the stylus from the Deluxe Flower Shaping Kit. Make four buds by using the extra small petals. Add Designer Dries Clear Glue to the reverse and gently push each petal together to form a bud. Hold for a few moments for the glue to dry.  Add small, medium, large and extra-large layers, according to size, using Dries Clear Glue. Offset the petals as you go. Adhere three Roses to one side of the photo with hot glue.

To make the leaves, stamp onto Deluxe Flower Shaping paper with Leaf Green ink, Leafy Accents Leaves from the Leafy Accents Cling Stamp Set. Die cut with the matching dies. Place in the Leafy Accents Shaping Mold and lightly spritz with water. Run through a die cutting machine and tap out. Ink the edges of the leaves with Ranger Archival Olive ink using a Dauber. Cut into small segments.

Adhere the leaves around the Roses with hot glue. Adhere the Rose Stems at the base of the floral heart with hot glue, three to either side. Adhere a small Rose. Using a brush or a small sponge, apply Dries Clear Glue wherever you would like glitter. Add clear glitter. All done.

Other Products: Paper Trimmer, foam tape, die cutting machine, water spray bottle, hot glue, clear glitter.

Instructions:

Fold a 6.5” x 12” piece of white card in half, place the largest simple centrepiece die so that it slightly overlaps the fold and die cut to create a shaped card. Die cut a single large white simple centrepiece and adhere this to the card front. Die cut the 2 largest dies from the simply elegant centrepiece set using white card, adhere together using dries clear adhesive and layer onto a pink paper diecut of the 2nd largest simple centre piece die.

Stamp the sentiment onto pink paper from the collection using black ink and clear heat emboss. Die cut using the budding rose heart. Adhere to a white card die cut of the heart using dries clear adhesive.

Stamp the heart onto white card using black ink and clear heat emboss. Colour using colour pencils, die cut and adhere on top of the sentiment heart. Lightly curve the edges at the sides and adhere to the centre of the centre piece die cuts using foam pads in the centre of the heart.

Use a sponge to add a small amount of adhesive around the centrepiece die and sprinkle with crystal ultrafine glitter.

Adhere the centrepiece to the card front using dries clear adhesive.

Other Products: Coloured pencils, clear embossing powder, versafine clair black ink, foam pads

Instructions:

Cut out the white base of the card and fold it to 6" x 8". From the paper collection, cut a slightly smaller rectangle and glue to the base. Then cut a 5 1/2 "x 7 1/2" rectangle out of white paper and a slightly smaller rectangle from the paper collection, adhere with Double Dots 100 pc. -3D

Cut the largest frame from the Decorative Heart Die set out of white paper and glue it, then cut the next smaller frame - a heart from the paper collection and glue it. Cut an openwork heart out of white paper, then cut out the smallest heart from the paper collection and adhere it with Double Dots 100 pc. -3D Foam Circles. From the black paper, cut out the word 'Love' from the same set and glue it in the center of the green heart.

Stamp the rose branches from the Friendship Rose Heart set with black ink on white paper, then cut out with the coordinating die and color with water markers. Glue as shown.

Make Nuvo Apple Green dots and let it dry.

Other Products: Cutting machine, water markers

Instructions:

Create a top fold card from a smooth white card stock measuring 5” x 7”. Choose the designer paper from Friendship Rose Paper Collection and cut to size measuring 4 1/2” x 6 1/2”. Next, mat this paper on Luxe Gold Card stock measures 4 3/4” x 6 3/4”. Mat this ready panel on white card base using dimensional tape.

Cut decorative die cuts from white card stock and Luxe Gold card stock using main die from Decorative Heart Die. Stack both die cuts together slightly offset. Adhere it on the card using tacky glue.

Stamp all the images from Budding Rose Heart Cling Stamp Set and one rose from Friendship Rose Heart Cling Stamp Set using jet black archival ink and paint these images using Zig Clean Clear Brush Markers. Die cut these images using coordinating dies. Using heart die from Budding Rose heart die and cut from luxe gold card stock and stack it behind the coloured image of heart slightly offset. Now choose a designer paper from the same collection and die cut using a solid heart die from Decorative Heart Die. Stamp the sentiment “You’re One in a Million” from Friendship Sentiments Cling Stamp set on a die cut heart using wilted violet distress oxide ink. Adhere the coloured heart image on the solid die cut heart using foam tape.

Stamp the roses from the classic rose cling stamp set on vellum with versamark watermark and heat emboss them in white and color them using Lulu Lavender by memento and a hint of Majestic Violet in the centre. Stamp the leaves from the leafy accents cling stamp set with archival fern green and color using leaf green archival ink and Vivid Chartreuse archival ink. Cut the flowers and leaves using their coordinating dies and shape them using the coordinating 3D shaping mold.

Stamp the  images of small butterflies  from Large Floral Butterfly Cling Stamp Set on vellum with versamark watermark and heat emboss them in gold. Cut these butterflies using coordinating die.

Once all the elements are ready assemble the card as shown. For final look apply Crystal Clear powder to the flowers using Art glittery dries clear glue. Also add some stones and sequins to the center of the card.

Other Products: Smooth white card stock, dimensional adhesive, hot glue, hot glue gun, scoreboard, die-cutting machine, VersaMark watermark stamp pad, nuvo drops, Spectrum Noir glitter brush pen, die cutting machine.

Instructions:

Card size is 5” x 7”. Take two different pattern papers from HCDP1-2145 Friendship Rose Paper Collection, tear edges, as shown and adhere it on white card base.

Cut two HCD2-7430 Decorative Heart base die on luxe gold cardstock and intricate heart die on white cardstock, adhere them together using designer dries clear adhesive and then adhere this die using foam tape overlaping little. Cut Love sentiment die on luxe gold cardstock and adhere it as shown.

Stamp rose heart image on white cardstock using archival ink-light house and jet black ink, cut it with coordinating HCD1-7428 Friendship Rose Heart Die, add crystal clear glitter and adhere using foam tape. Stamp sentiment from  HCPC-31007 Friendship sentiments Cling Stamp using archival ink-light house.

Stamp some flower petals from HCPC-3906 Small Wild Rose Cling Stamp on Deluxe Flower Shaping paper using archival ink-magenta hue and cut it with coordinating die HCD1-7289 Small Wild Rose Die and color them using archival ink-magenta hue and leaf green. Shape them using Small 3D Wild Rose Shaping Mold. Create some small flowers and add gold beads in the centers.

Stamp some leaves from HCPC-3835 Leafy Accents Cling Stamp on Deluxe Flower Shaping paper using archival ink- English ivy and cut them with coordinating die. Color them using archival ink-leaf green and English ivy. Shape them using HCFB1-467 3D Leafy Accents Shaping Mold.

Arrange all flowers and leaves as pictured.

Other Products: Big shot Plus Machine

Instructions:

Create a 5 x 7" card base in white cardstock. Cut out a 4.5 x 6.5" peach piece of paper from the Friendship Rose Paper Collection, distress with Coastal Coral, cut out a plum piece of designer paper, slightly bigger and adhere together. Adhere to card front.

Cut out the Decorative Heart Die twice in white card stock, sponge the edges of one with Coastal Coral and adhere offset as shown in photo. Cut out the center scalloped heart die from the Decorative Heart Die in peach designer paper and plum and adhere offset with foam tape. Cut out the center heart in rose paper and adhere.

Stamp the sentiment from the Friendship Sentiments Cling Stamp Set on peach paper and cut out with the center heart of the Decorative Heart Die, distress with Coastal Coral, adhere with foam tape, offset as shown.

Stamp the roses from the Classic Rose Cling Stamp Set in Vibrant Fuchsia, sponge with same, cut out with coordinating dies and sculpt with the 3D Rose Shaping Mold, add glitter.

Stamp the leaves from the Leafy Accents Cling Stamp Set in Olive, cut out with coordinating dies, sponge with Olive and Vibrant Fuchsia, sculpt with 3D Leafy Accents Shaping Mold.

Adhere flowers and foliage as shown.

Other Products: White card stock

Instructions:

Create base. Take paper piece 7" x 10" and fold in half. Cut a piece 6 7/8" x 4 7/8" from paper collection and add to the base of card. Using Decorative Heart Die, cut piece from paper collection adhere to the front of the card using Adhesive Foam Strips for dimension.

Stamp on the white paper Budding Rose Heart Stamp Set using Ranger Archival Ink Pad - Jet Black and cut using the coordinating dies. Colour with green and red pencil. Place onto the card using adhesive foam strips.

Stamp sentiment using Friendship Sentiments Cling Stamp Set on the piece of paper collection with Ranger Archival Ink Pad - Jet Black and place onto the card using adhesive foam strips. .

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine, green and red pencils

Instructions:

The ready side fold card measures 6″ by 8″. Cut a smooth white cardstock measuring 12″ by 8″ and score it at 6″ on the longer side. Crease and score it well using a bone folder.

Choose a pattern paper from the designer paper collection and cut measuring 5 1/2″ by 7 1/2″. Mat it on the white cardstock Luxe Gold cardstock creating a delicate border of 1/16″ on all sidesfor each layer. Layer the panel on the card base using foam dots.

Cut 3 fancy frames from smooth white cardstocks using Decorative Heart Die and stack them together using an adhesive that dries clear. Choose the paper from the designer paper collection and cut a solid eyelet heart and glue it to the window. Layer the prepared frame on the card front using foam dots.

Stamp the required images from Friendship Rose Heart Stamp Set using black archival ink and paint them using Zig Clean Clear Brush Markers. Next, cut the painted images using the coordinating die. Glue an extra die cut behind the painted image to add extra strength. Layer the painted heart in the widow as shown.

Stamp a few fillers from Floral Shoppe Fillers Cling Stamp Set using Leaf green and cut it using its coordinating die set. Sponge adhesive that dries clear on the fillers and sprinkle mixed shades of prills. Dust extras and also sprinkle some Rajni Chawla’s Crystal Clear Powder and keep them for drying.

For the wild roses, stamp the flower petals with Magenta Hue archival ink using the Small Wild Rose Stamp set and cut them using its coordinating dies. Ink the flower centers using Leaf Green and color the flowers using Magenta Hue. Shape the flowers using a Deluxe flower shaping kit. Once the shaping is done, assemble a few flowers using ball tools from the shaping kit and add matching seed beads to the flower centers. Apply a layer of crystal lacquer on the flowers and dust Rajni Chawla’s Crystal Clear Powder.

Stamp, color and cut a few Wisteria flowers using Leaf Green Archival ink and shape them using a flower shaping kit. Add flower pollens using a glossy accent and use these flowers as fillers.

Stamp 2 sets of leaves using Leafy Accent stamp and Olive Green Archival ink and cut them using its coordinating die. Color the leaves using the same inks and shape them using a deluxe flower shaping kit. Once all the elements are ready, assemble the card as shown and complete the card by adding Luxe Gold stacked sentiment die cut from Decorative Heart Die.

Other Products: Smooth White Card stock, Scoreboard, Double-sided tape, and Adhesive that dries clear.

Instructions:

The finished card measures 6 x 5 1/2 inches. Cut a piece of deluxe flower shaping paper 12 x 5 1/2 inches and score at 6 inches to make a side fold card.  Cut different pieces of paper from Friendship Rose Collection as follows: 5 3/4 x 5 1/4 inches in coral paper #8B glue on the base, 5 1/4 x 4 3/4 inches in black paper #11B glue with 3D foam dots, 5 x 4 1/2 inches in pattern paper #1B glue over the black paper.

Stamp rose flowers onto white flower shaping paper with Jet black archival ink. Color with zig marker and diecut with the coordinating die. 

In white Deluxe Flower Shaping paper, die cut the Decorative Heart die 5 times. Glue them on each other. Cut from the paper 8A a sentiment and glue it under the lace heart.  Also stamp a sentiment with Friendship sentiments stamp in leaf green on the little heart and ink the edge with the same color.

Glue the two hearts and the flowers on your card as shown.

Make different kind of flowers: Flower from Classic Rose collection, stamp onto white Deluxe Flower Shaping paper with the coastal coral ink and color in the same ink. Diecut with the coordinating die. Give further shape with Deluxe Flower Shaping kit tools. Glue them together and add crystal clear glitter with glue to make them shine.

Flower from Hollyhock collection, stamp onto white Deluxe Flower Shaping paper with the leaf green ink and color in the same ink. Diecut with the coordinating die. Give further shape with Deluxe Flower Shaping kit tools. Use 2 small layers to make a flower. Add assorted pearl medium stamens in the center. Add crystal clear glitter with glue to make them shine.

Leaves, stamp in leaf green leaves from the Leafy accents. Color with the same ink. Cut it with the coordinating die and shape with the shaping mold.  

Put cheesecloth on your card next to heart and glue your flowers and leaves over. 

Other Products: Die cutting machine Cut’n’boss, heat gun, water mister, hot glue gun, hot glue, scissors, cheesecloth,

Instructions:

Cut a piece of white card stock to 7 x 10” and score in half at 5”. Using sheet 8B from the HCDP1-2145 Friendship Rose Paper Collection, cut a piece measuring 5 x 7”. With a Hydra Sponge, apply Dries Clear Glue to the edges and sprinkle with Lion's Mane Ultra Fine Transparent Glitter, once dry, attach to the card base. Cut a piece of white pearl cardstock to 4 3/4” x 6 3/4” and emboss with a floral embossing folder. Lightly sponge the flowers and leaves with Coastal Coral and Leaf Green Archival Inks. Attach this layer to the card front. Using the HCD2-7430 Decorative Heart Die, take the two inner hearts and die cut the pearl cardstock 2x. Do the same with both sheet 8B and 10A from the Friendship Rose paper pad. (For the pearl cuts use the outer hearts and for the colored cuts use the inner hearts for this project) With the outline heart only, cut Luxe Silver Cardstock 2x and adhere to the back of the pearl hearts previously cut. Using sentiment stamps from HCPC-3843 Special Birthday Sentiments Cling Stamp Set and HCPC-3845 Just For You Sentiments Cling Stamp set stamp the center of the colored hearts with the coordinating ink color. (Bright Tangelo and Leaf Green Archival Ink) Glue the small hearts to the center of the larger hearts.

Stamp the curved branch 2x from the HCPC-3949 Sweet Magnolia Buds Cling Stamp Set with Versa Color Pigment White Ink onto Rajni Chawla’s Vellum. Using HCDA1-449 Stack and Store Daubers color the back side of the vellum with Leaf Green and Bright Tangelo Archival Inks. Die cut using coordinated dies. Lightly hand shape on the back side with the Deluxe Flower Shaping Kit.

Adhere a string of pearls along the outer edge of the white pearl cardstock using the Dries Clear Glue. Attach the hearts to the card front as shown using foam dots for the lower heart and Double Dots 100pc - 3D Foam Circles for the top heart for extra height. Glue the Magnolia buds along side the hearts to complete the project.

Other Products: 3D Foam Dots, String of Pearls, Embossing Folder, Pearl Cardstock, Blending Ink Brushes, Anti static tool, Heat Tool, Scissors, Die Cut Machine

Instructions:

Using cream cardstock for card base, create a ready folding card size 9 by 5 1/2 inches. Cut another panel from cream card which is slightly smaller than card base and adhere it on to the card using dimensional tape. Cut a panel from Friendship Rose Paper Collection sheet number 1B,  measuring 8 1/2 by 5 inches and adhere on the last panel using clear glue.

Die cut the heart shape image using Decorative Heart Die on the designer paper sheet number 8B add extra layer underneath for the sturdiness, and adhere this shape on the card base using dimensional tape.

Die cut the heart shape on the green pattern paper using heart die from decorative heart die set and adhere on the big heart shape using clear glue.

Stamp the heart image on black card from Friendship Rose Heart stamp set using embossing ink, cover with gold tinsel embossing powder, heat it using heat tool and die cut the image using coordinating die, adhere this image on green heart shape using clear glue.

Stamp the bud images from Friendship Rose Heart Stamp Set on the vellum using embossing ink and cover the images with gold embossing powder, heat it using heating tool die cut with coordinating dies, and color buds from the back side using dauber with Magenta Hue Ink.

For the flowers stamp the classic rose images on the maroon card using embossing ink cover with white and gold tinsel embossing powder heat it using heating tool die cut with coordinating dies. Shape the flowers in 3D shaping mold and finish shaping using shaping kit and make a few flowers using hot glue. Stamp the leaves image from Classic Rose on the Deluxe Card using leaf green ink, die cut using coordinating die, color the images with leaf green ink and mowed lawn ink and shape the leaves in mold. Cover with clear glue and Nida Tanweer Magic Glitter Powder.

Stamp the branch image from Stylish Rose Frame Cling Stamp Set on the light pink cardstock using embossing ink cover with gold tinsel embossing powder, heat it using heating tool, die cut using coordinating die. 

Stamp the sentiment using Light House Ink on the deluxe card from Friendship Sentiments Stamp Set, after trimming with scissors, color the sentiment edges with leaf green ink.

Arrange all ready elements using hot glue and dimensional tape as shown.

Embellish the card with decorative beads and pearls.

Other Products: Cream Cardstock, Light Pink Cardstock, Black Card, Maroon Card, Pearls, Vellum, Dimensional Tape, Embossing Ink, Gold Tinsel Embossing Powder, Decorative Beads, Mowed Lawn Distress Ink, Nida Tanweer Magic Glitter Powder, Hot Glue Gun.

Instructions:

Card size is 4 1/4 x 5 1/2”. Score and fold 5 1/2 x 8 1/2” Petal Pink cardstock at 2 1/8” and 4 1/4” on the long side. The 4 1/4” fold is a valley fold and the 2 1/8” fold is a mountain fold. Cut white cardstock 4 x 5 1/4”, 1 7/8” x 5 1/4” and 3 1/4 x 4 3/4”. Cut Luxe Gold Cardstock 3 3/8 x 4 7/8". Using VersaMark, stamp the white 4 x 5 1/4” piece with the ‘Right next door or miles apart, friends are always close in Heart’ sentiment from the Friendship Sentiments Cling Stamp set and the single rose from the Budding Rose Heart Cling stamp set, cover with WOW Metallic Gold Sparkle Embossing Glitter and heat set using the Heat It Tool. Color the rose with Stampin' Blend markers – Light and Dark Petal Pink and Light and Dark Granny Apple Green. Adhere that piece to the inside of the card. Adhere the white 1 7/8” x 5 1/4 to the left side of the card front.

Using a punch, cut an opening in the card base for the ribbon. Cut a 20” piece of ribbon, adhere to the card front, feed through the opening, wrap around the back and tie into a bow. Using an embossing folder of your choice, emboss the 3 1/4 x 4 3/4 white cardstock, adhere to a piece of 3 3/8 x 4 7/8” Luxe Gold cardstock, add dries clear adhesive to the left side only and adhere to the card front as shown.

Using VersaMark, stamp the Friendship Rose Heart on heavy white cardstock, cover with WOW Metallic Gold Sparkle Embossing Glitter and heat set using the Heat It Tool. Color the image with Stampin Blend markers – Light and Dark Petal Pink and Light and Dark Granny Apple Green. Diecut using the coordinating dies, lightly shape using the Deluxe Flower Shaping kit and adhere to the card front using dimensional dots.

Stamp the ‘For My friend’ sentiment from the Just For You Sentiments Cling Stamp Set on white cardstock using VersaMark, cover with WOW Metallic Gold Sparkle Embossing Glitter, heat set using the Heat It Tool and diecut using the Arrows and Banner Die set. Using the same set cut a gold mat a little larger that the friendship banner. Adhere the sentiment banner to the top of the card front using dimensional tape.

Other Products: Die Cutting Machine, Heavy White Cardstock, Petal Pink Cardstock, Embossing Folder, Hot Glue Gun, Misti, VersaMark, WOW Metallic Gold Sparkle Embossing Glitter, Stampin blend markers – Light and Dark Petal Pink and Light and Dark Granny Apple Green, Punch, Petal Pink and Gold Ribbon, Hot Glue Gun, Misti, Dimensional Dots, Dimensional Tape,

Instructions:

Click HERE to see the video tutorial for this card.

Score a 10" x 7" piece of Deluxe Flower Shaping paper at 5" and fold to make a 5" x 7" card base. Cut a 4 3/4" x 6 3/4" piece of pattern paper from Hollyhock Garden Paper Collection and adhere it on the card.

Stamp the fence from Hollyhock  Fence Cling Stamp set on a piece of Deluxe Flower Shaping paper using Sepia Archival ink twice and ink them with same ink. Die cut them using the matching die from Hollyhock  Fence Die and adhere them together to create a wider fence. Adhere it on the cardbase on 3 sides using adhesive foam strips to create a pocket.

Stamp the image from Hollyhock Stem & Blooms Cling Stamp set on a piece of Deluxe Flower Shaping paper using Olive Archival ink 3 times and ink them with Leaf Green Archival ink. Die cut them using the matching die from Hollyhock Stem & Blooms Die and shape using Deluxe Flower Shaping Kit. Cut one of the stems to shorten it and then Adhere them as shown on the fence.

Stamp the flowers from Hollyhock Petals and Leaves Cling Stamp set using Carnation Red and Bright Tangelo Archival inks. Color them using Carnation Red, Bright Tangelo and Sunflower Archival inks. Die cut all the flowers using the matching dies from Hollyhock Petals and Leaves Die. Shape them using the 3D Hollyhock Shaping mold and Deluxe flower shaping kit. Poke a hole in the centers of the flowers with the pointed end of the groove golf tools and thread a pollen from Medium Assorted and Pastel Bead Stamens in each one of them and adhere with dries clear glue. Cut off the pollen stems once the glue dries and adhere on the Hollyhock stem as shown using hot glue gun.

Die cut 2 pieces of white cardstock and pattern papers using the dies from Treasured Heart Gift Box Die. Assemble them to create a small sachet/ envelope. Tuck it inside the fence pocket.

Stamp the butterflies from Large Floral Butterfly Cling Stamp sets on a piece of vellum using white versacolor Ink and heat emboss using White embossing powder and  heat gun. Die cut them using matching dies from Large Floral Butterfly. Adhere them on the card front. Add a few rhinestones to the butterflies' body.

Other Products: Silver rhinestones