Other Products: Memento Angel Pink, White card stock, Seam Binding, pearls, Liquid Pearls-white Spun Sugar Distress Ink, Lemonade Yellow Distress Ink, Pink Shimmer card stock, Copic Markers: RV00,RV10,RV02,Y00,YG11,YG25

For more tips on creating with the Classic Rose collection, watch the tutorial at https://youtu.be/Z8P070kC3oo.

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: See here to view a larger photo of this project. Box is approximately 4 3/4 X 2 3/4".  Cut box die 4 times out of white heavy weight card stock and cut out each side with the inset die to form a square window on each side. Cut inset out again from Pink Shimmer card stock. Cut 4 pieces of vellum 2 3/4 X 2 3/4". Glue Vellum to the inside of each panel window and glue pink inset to the top of each vellum window. Cut and glue decorative paper to match inset for each top section of the box (part of box die set). Fold at score lines and glue each straight side together then each top section until box is formed. Close top by folding flaps under each other.

Dye seam binding with Angel Pink refill and crinkle while drying. Make a bow for the top of box. Stamp, die cut and sponge roses with Rose Bud ink and then set them in rose mold, spritz with a bit of water and place the top on and run it through your die cutting machine with just the two cutting plates no base plate. Close buds with glue and glue rose pieces together just as you normally would, see Emma Lou's video for making roses.

Stamp, die cut and sponge color on the leaves from Window Box Fillers (rose looking leaves) using Bamboo Leave and New Sprout inks. Use the flower shaping kit to lightly shape the back of each leaf. Add leaves to front of box and then add roses on top. Add pearls and Liquid Pearls like Babies Breath. Sponge on Dries Clear glue and sprinkle with Crystal Clear. Stamp sentiment with Rose Bud Memento and die cut with one of the Banners from Banners of Love. Use RV00 and RV10 to add shading to the banner. Glue to front top section and glue bow to just one of the closing flaps (so you can open and close box).

Other Products: Memento Angel Pink, White card stock, Seam Binding, pearls, Liquid Pearls-white Spun Sugar Distress Ink, Lemonade Yellow Distress Ink, Pink Shimmer card stock, Copic Markers: RV00,RV10,RV02,Y00,YG11,YG25

For more tips on creating with the Classic Rose collection, watch the tutorial at https://youtu.be/Z8P070kC3oo.

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: Card is 4 1/4 X 5 1/2"

Dye seam binding with Angel Pink refill and crinkle while drying. Make a small bow for card. Stamp, die cut and sponge roses with Rose Bud ink and then set them in rose mold, spritz with a bit of water and place the top on and run it through your die cutting machine with just the two cutting plates no base plate. Close buds with glue and glue rose pieces together just as you normally would, see Emma Lou's video for making roses. Stamp, die cut and sponge color on the leaves from Window Box Fillers (rose looking leaves) using Bamboo Leaves and New Sprout inks. Use the flower shaping kit to lightly shape the back of each leaf.

Die cut a pink inset from Box die set, cut vellum 2 3/4 X 2 3/4", piece of decorative paper for behind inset and a strip of decorative paper for left side of card. Stamp and die cut "Just For You" Banner with Rose Bud, color leaves and flowers with YG11,YG25,RV10,RV00,RV02 Y00. Add little dots of Liquid Pearls. Stamp Forever Love background with Spun Sugar Distress ink (very light pink) onto white panel 4 1/8" X 5 3/8", sponge with glue and sprinkle Crystal Clear glitter onto it. Add decorative paper strip (from Heartfelt Love Paper Collection) to left side about 1/4" from left edge then the stacked square inset (decorative paper, vellum then pink inset), add pearls to centers of flowers on inset then glue leaves to card running them up the decorative paper strip. Add roses and bow following leaves and end with 3 little rose buds. Add Liquid Pearls Babies Breath, Crystal Clear glitter and Banner then attach to a pink 4 1/4 X 5 1/2" pink panel and finally to a folded white card.

Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.  

Classic Rose collection, watch the tutorial at https://youtu.be/Z8P070kC3oo.

Instructions: Take one Sheet of White Card stock and Place the outer edge of the Sweetheart Die on it and diecut. Turn the Die around so it meets the edge of the the one we cut and diecut again, do this twice. Score one at one inch down from the top and glue the two tops together. This creates your card base.

Cut two of the Sweetheart Border Dies in white and glue these to the front of your card with dries clear adhesive. They will slightly overlap in the middle

Stamp your Classic Rosses in Old Rose Ink and Your Praying for you stamp from the Banners of love Stamp set. Diecut, colour and shape your Roses, add these to one side of your card, add glue with a sponge and sprinkle with Crystal Clear. Diecut and glue your Sentiment to the other side of your card.

Other Products: White Ribbon, Ranger Silver Embossing Powder, Versamark ink

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

To see how to shape the roses, watch the video at https://youtu.be/Z8P070kC3oo.

Instructions: Cut a piece of white cardstock at 12" x 6", score at 3 1/4"and 8 3/4" and fold to create the gatefold. Using the cutting edge of the HCD1-7161 Sweetheart Borders Die cut both ends of the card. Die cut the decorative die from white cardstock and adhere it to the sides of the card with dries clear adhesive.

Cut a piece of white organza ribbon approximately 24". Using a craft knife cut a small slit in the folds on both sides and thread the ribbon through. Cut a piece of the pink patterned paper at 6" x 5 7/16" and adhere to the centre of the card. Cut the outer semi circular die from the HCD1-7144 Decorative Medallion Die from white cardstock and then die cut the decorative die and adhere to the top of the base die. Adhere to the top of the card as shown.

Stamp the images from the HCPC-3756 Blushing Rose Swirls Stamp set in Versamark ink on white cardstock, heat emboss with silver embossing powder and die cut with the coordinating die. Using a dove blender pen colour the leaves with Bamboo Leaves and the roses and buds with Cantaloupe and Pearlescent Coral. Shape and adhere to the fronts of the folds and the top of the semi-circular medallion at the top of the card.

To make the roses stamp the images from the HCPC-3752 Classic Rose Cling Stamp set in Pearlescent Coral, sponge the centres with Canteloupe inks and die cut. Sponge the edges with Pearlescent Coral before shaping the flowers using the HCST1-401 Deluxe Shaping Kit and assemble as shown and adhere to the leaves on the front as shown.

Die cut the largest eyelet die out of white cardstock from the HCD1-7162 Eyelet Hearts Die and adhere to the centre of the card. Die cut the dark pink patterned paper with the second largest Eyelet Heart die and adhere to the heart. Stamp the sentiment from the HCPC-3804 Heartfelt Love Sentiments Stamp set with Versamark ink and heat emboss with silver embossing powder on white cardstock. Die cut the heart using the next size down plain heart die from the HCD1-7162 Eyelet Hearts Die set and adhere to the eyelet heart as shown in the middle of the card.

Stamp the image from the HCPC-3803 Banners of Love Stamp set in versamark ink on white cardstock and heat emboss with Silver embossing powder. Colour the image in with Bamboo Leaves, Pearlescent Coral and Cantaloupe inks and die cut with the coordinating die. Adhere to the top of the hearts as shown and then add a rose to finish.

Other Products: Hot Glue Gun, Iron, Memento Luxe : Northern Pine, Copic Sketch: YG17, G94, RV55,RV11, Bling Embellishment, Bead Spray (Mauve), Westcott Brand: Scissors, Cutting Board, Recollections: Silver Foil Paper, Paper Shredder, Piercing Tool

For more tips on creating with the Flowering Dogwood collection, watch the tutorial at https://youtu.be/gI8RqHAt3vE.

Instructions: Take your white cardstock and create a 4.25 x 6.25" card base. Next cut your Classic Wedding paper and cut to 4x6" this will be your background paper to your card. Then take your distressing tool and distress the paper edges. You will then tear a small slit at the top and curl the edges outward. This is where you will lay the bling button.

Next diecut using the Sweetheart Borders die and silver foil paper. Once done adhere this to the card front along the side using dries clear adhesive. Place the straight edge of the die along the edge.

Now take your Eyelet Oval using the scalloped edge with the Under the Sea paper in pink. Now use the oval to diecut the sentiment from the Heartfelt Love collection which you will lay over the scalloped cut. This will be the card focal point.

To create your Flowering Dogwood flowers simply stamp medium size flowers from the stamp set using the Memento Dye in Rosebud on the Art Foam a total of 4 times. Once done diecut the stamped flowers and add some color and shading using your Copic Sketch pens in RV11 and RV55. Now taking your tweezers lay each flower against your iron until you see the foam begin to sort of melt. When this happens this is when your Art Foam is in the molding stage. Take each flower and fold and roll between your fingers. Once your are done take your piercing tool and pierce the centers to add your stamens.

Diecut a total of 5 leaves from the Flowering Dogwood set onto the Blazing Poppy patterned paper using the Memento Luxe ink in Northern Pine. Then add some color and shading with your Copic Sketch: YG17 and G94.

Once all your flowers are complete simply arrange them as desired onto your card surrounding your sentiment. Add your leaves and bead spray for added decor.

Other Products: Archival Plum, Leaf Green, Library Green, Olive Green, Smooth white cardstock

To see how to shape the roses, watch the video at https://youtu.be/Z8P070kC3oo.

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions:  To view larger photos of this project, see here. For the rose bouquet, stamp a couple of images from the Classic Rose Stamp Set with Archival Plum and cut them using its coordinating die. Use Color Box Harvest and Dark Peony to color the roses using the Stack and Store Daubers. The leaves are stamped with Library Green and colored using Fern Green and Olive Green. The flowers and leaves are then shaped using Deluxe flower shaping kit and dressed up using Frosting Powder and Crystal Clear. The filler flowers used here are from Wildwood Floral stamp and cut using its coordinating die. Shape them and keep them aside.

For the treat basket, cut 2 strips of smooth white cardstock measuring 9 1/2" by 2 7/8", score at 3/8'' and 5" on the longer side, and 3/8''on the shorter side. Adhere the flower panel of Gift of Love Box Die with low tacky tape twice on all the four scored panels and run them through die cutting machine. Choose the pattern paper and glue a strip measuring the same size, to the inside of the window. Score all the four sides and glue all the hinges. Cut a piece of 4 7/8" by 4 7/8" square from white cardstock and glue it on the base. Also, cut only the fancy edge from the larger die from Sweetheart Border Die set and glue on the edges of the basket.

For the handle, cut 2 strips of 6" by 2" and cut the border on both the sides. Glue both the fancy strips together on the long sides with dries clear adhesive and attach it to the basket to make the handle.

Arrange a small bouquet of roses on one side as shown. Further, decorate the bouquet using a couple of filler flowers from Wildwood Floral Collection.

To display the sentiment, cut a frame by nesting outer Eyelet die and the plain die and adhere a die cut from Window Box Element Die. Cut one base and stamp the sentiment using StazOn Ink Pad - Fuchsia Pink. Layer both the pieces using foam dots.

On the other side of the basket, stamp the sentiment from Banners of love sentiment using Fuschia Pink StazOn and cut it using its coordinating die. Layer it on the treat box using foam dots and decorate it a little with filler flowers.

Other Products: Green Cardstock, Glue Gun, Heat Gun

For more tips on creating with the foam paper & stamens, watch the tutorial at https://youtu.be/Oma6ctVmUD0.

Instructions: Prepare a 5 1/2 x 7 1/2 card base, layer it with green cardstock and a piece from the classic Petunia paper collection.

Cut the Sweetheart border die out of white cardstock and adhere to the top of the card with dries clear adhesive.

Stamp 6 sets of the Mums on the Art Foam Paper with Timber Brown ink, color in with the Vibrant Violet ink, cut out, use the heat gun and shape. Put 3 of the largest together along with 1 medium and 2 small to get the largest flower. Use the piercer from the Deluxe Flower Shaping Kit and punch a hole in the center of the flowers, put 7 stamens together, fold in half and pull through the hole, use a heat gun to glue in place. Next use 2 medium and 2 small to make the next two flowers, add 4 stamens each and repeat as with the first one.

Stamp the leaves on the Art Foam Paper with the Olive Green and color in with the Eden Green, cut out shape and adhere to card, add flowers on top of leaves.

Other Products: Archival inks-Leaf green, library green, deep purple, magenta hue, gold embossing powder-Zing, wire pollens-yellow, deep purple card stock, versamark embossing ink

For more tips on creating with the Classic Rose collection, watch the tutorial at https://youtu.be/Z8P070kC3oo.

Instructions: This is a Gatefold card and measures 8" x 8". Cut white cardstock 8" x 8" to create card base. Cut a pattern paper from Butterfly Medley paper pad, a little smaller than the white card front and adhere to the front of the card base. Cut another piece 7" x 7" from Heartfelt Love paper pad and adhere on the first mat layer using dries clear glue. Cut a deep purple card stock 6.5" x 6.5". Cut out two mat layers from the same paper using the sweet heart borders die. Score at the base at 1/2 inch on both the mat layers and adhere at the back of the card base on both sides. Adhere this card panel with gate fold on the white card front.

Cover the inside of the gates on both sides with mat layer from the sweet hearts border die. Cut a pattern paper 7"x 7" from Heartfelt Love paper pad and cover the inside of the card base.

Cut a piece of vellum 7" x 6" and roughly tear the edges. Distress the edges with Magenta hue ink. Stamp the Forever Love background stamp in Versamark embossing ink on vellum and apply gold embossing powder. Heat set this and adhere inside the card using clear glue.

Cut two sweetheart borders dies and adhere on the mat layer of the gates matching the lines very well. Cut out four borders from white card stock and adhere two on each sides of the card .

Other Products: White Pearl Metallic Cardstock, Purple Punch Metallic Cardstock, Sheena Douglas Embossing Folder, Big Shot, Misti

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

To see how to shape the flowering dogwood, watch the video at https://youtu.be/gI8RqHAt3vE.

Instructions: Cut Cardstock 10" x 7", score at 5" to create a 5" x 7" card base. Cut Purple Punch cardstock 4 7/8" x 6 7/8" and adhere to the card base using dries clear adhesive. Cut another piece of white cardstock 4 3/4" x 6 3/4", emboss with embossing folder and adhere to card base.

Stamp sentiment on white cardstock with Dark Peony ink and diecut using one of the plain edge heart dies. Cut a larger eyelet heart from purple punch cardstock and adhere the hearts together with dimensional dots. Add to the card base with more dimension dots.

Stamp the flowering dogwoods on white cardstock using dark peony ink, diecut with coordinating die, add more color to the edges and shape with the deluxe flower shaping kit. Add Minnie Pearl Prills to the centers, sponge with dries clear adhesive and sprinkle with Crystal Clear.

Stamp the classic rose vines on white cardstock with Bamboo Leaves Ink, cut with coordinating die, lightly color the centers with bamboo leaves and dark peony inks and add more color to the edges. Shape with deluxe flower shaping kit, add Crystal Clear and adhere the vines and the flowers to the card base as shown.

Other Products: Lace, Distress Ink Vintage Photo, Creme cardstock, Pearl pen White, hot glue gun, Vellum, Versafine black ink, spray bottle with water

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: To view a larger image of this project, see here. Cut the die 4 times out of Creme cardstock, use the flower insert in all 4 pieces to cut the flower window out, after that you can cut 4 pieces of the vellum and glue this behind the windows. Now you can glue the box together by putting dries clear glue on the tabs, when the box is done you can Ink all the edges with the Vintage Photo ink. Cut out 4 times the little top part from pattern paper and ink this too with the same ink and glue the pieces on the top part of the box, You can also cut a strip of pattern paper for the bottom and the top part.

Put a piece of lace all around the top part, put some dots with the pearl pen on the window Flowers and on the bottom design paper strip, stamp the rose vines with the Versafine black and color them with a mix of New Sprout and Bamboo Leaves and Vintage photo, Cut them out with the coordinating die and glue this on top of the box.

Now Stamp 5 Big Rose petals with  the classic rose stamp set using Rhubarb Stalk ink and cut them out with the coordinating die, wet them with a spray of water and shape them with the deluxe flower shaping kit. After each petal you color the rose on the back with the Rose Bud. Color very lightly and when the rose is done you can put some Rhubarb stalk ink and Ink the edges of the rose to make it darker, then you can glue them on top of the rose vines.

Stamp with Rhubarb Stalk some flowers of the window box fillers on creme cardstock and cut them out with the coordinating die, I didn't color the flower itself, now shape them with the shaping kit, make a hole in the center and put a flower stamen in, now you can glue the flowers next to the rose.

Other Products: White Cardstock, Red Cardstock, Ranger Archival Ink in Sap Green, Aged Mahogany Distress Ink, London Fog Memento Ink

For more tips on creating with the Flowering Dogwood collection, watch the tutorial at https://youtu.be/gI8RqHAt3vE.

Instructions: My card is 4 1/2 X 6". Make card base and cover with a piece of red cardstock and then cut out a card front and glue that down as well.

Next using Sap Green ink stamp the dogwood flowers and then ink the centers of the flowers. Use Bamboo Leaves Ink to stamp the leaves and then cut out using coordinating dies. I used Aged Mahogany ink to color the tips of the flowers and then using the Flower Shaping Kit shape the petals and then add the prills to the centers. Set aside to dry.

Now using Tuxedo Black Memento Ink stamp the doves and use the coordinating dies to cut out. Use London Fog to shade the doves and add the glitter to the plumes.

When everything is dry, decide on your placement and glue everything to the card front. Your card is finished.

Other Products: Paper trimmer, scoring board, bone folder, ribbon, foam tape, Stampin up Lemon Lime ink, Stampin Up Melon Mambo ink, Stampin Up Early Expresso ink

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: To view a larger photo of this project, see here. Die cut four Heartfelt Creations box sides with white card stock and the Gift of Love box die. Stamp, color and die cut four of the flower clusters from the Heartfelt Creations Banner of Love stamp set and die sets. Color the flower clusters with Stampin Up red rose, Lemon Lime and Powder Puff Pink ink.

Assemble box using dries clear glue to attach the sides and bottom. Fold the top down. Die cut four pieces of designer paper from the Heartfelt Creations Heartfelt Love collection. Glue these pieces to the top portion of each side of the box. Put a very light layer of glue on each side panel of the box and sprinkle the crystal clear glitter on each die panel. Attach the colored flower clusters with foam tape to each side of the box. Attach ribbon to the very top of the box. A tealight can be placed inside to illuminate the gift box.

Other Products: White Card Stock, Brilliance Ink - Watering Can, 3D Lacquer, Crystal Micro Glitter, Versamark, Fern Green Embossing Powder, Versafine Black Onyx Ink and die cutting machine.

For more tips on creating with the Classic Rose collection, watch the tutorial at https://youtu.be/Z8P070kC3oo.

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: To view a larger image of this project, see here. Start by creating a basic box for the bench out of white card stock that has a finished measurement of 5 1/2" wide x 2 1/4" deep x 3/4" tall with three 1 1/4" circles evenly spaced. Next take another piece of white card stock measuring 6" x 4" and using the outside die from the Sweetheart Borders Die cut the card stock and adhere to the base. The arm rests are something that I quickly came up with and cut using my electronic cutting machine.

Once you have all your pieces assembled in white, cover the bench with designer paper from the Heartfelt Love Paper Collection.

The Classic Rose flowers were stamped on white card stock using Watering Can ink and die cut with the matching dies before distressing with Pearlescent Poppy ink and shaping with the flower shaping tools. After the flowers were shaped they were lightly brushed with 3D lacquer and dusted with crystal micro glitter.

The leaves were stamped on white card stock with Versamark and heat embossed with Fern Green embossing powder and die cut with the matching dies before coloring with Bamboo Leaves ink.

The sentiment was stamped on white card stock with Black Onyx ink and die cut with the Eyelet Oval & Basics Small Die before lightly distressing with Pearlescent Poppy ink and finally brushing dries clear glue around the edge and sprinkling with crystal clear glitter.

Other Products: Black Archival ink, light green pigment ink, white pearl cardstock, iron or heat gun, adhesive, glue stick gun, red pigment ink

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Take a round tin and select paper from the Festive Holly Collection and cut it out to size of tin as shown. Glue it with dries clear adhesive.

To create wreath stamp the Celebrate the Season Cling Stamp Set on white paper with black Archival ink and cut using the coordinating dies. Colour with green pigment ink using a sponge. You will need four sets of garland to decorate. Place three on the top creating wreath, adhere using 3D foam squares.

To create the flowers, stamp Poinsettia & Holly Clusters Stamp Set three times in different sizes, cut using the coordinating dies. Colour with red and green pigment ink using sponge. Sprinkle water on and place in the Poinsettia Shaping Mold, run through the die cutting machine. Allow to dry. Take the Poinsettia & Holly Clusters, sponge with Designer Dries Clear Adhesive and sprinkle Crystal Ultrafine Transparent Glitter

Arrange Poinsettia & Holly Clusters to the tin using a hot glue gun.

Other Products: Dark Pink card stock, Bling Crystal buttons, Ranger Diamond stickles, Hot glue gun, Ranger Distress embossing powder worn lipstick, Versa-mark, Fussy Cutting Scissors, Double sided Tape, White organza ribbon

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: To view a larger photo of this project, see here. Find the design paper with the white spots on it. Taking the die for the gift box, die cut this from the design paper x 4. Make sure all the fold lines are folded before putting the box together with Dries Clear Adhesive. Taking the card stock and the flower and leaf part of the die, cut this x 6. Cut the box top side panels x 4 from the same card stock. Adhere the panels to the box sides. With the extra 2 flower and leaf panels, trim the flowers and leaves away. Give shape to these using the flower shaping tools. Adhere to the front of the box panels.

Stamp and die cut the banner "Just for you" using VersaMark Ink and heat embossing with the pink embossing powder on white card stock. Bring shape to the flowers of the banner. Adhere this to the box front using double-sided 3d foam tape or squares for height.

Make a triple bow and tie a ribbon around the box top. Secure with the hot glue gun in place. Add a flower to the bow knot and the remaining leaves under the bow. Add the bling stones to the flower centers and to finish apply the diamond stickles to the flowers on the sentiment banner.

Other Products: Canson water color paper; 10x10 deep edge canvas; corrugated cardboard; Art Anthology Mists (Sand and Peacock Feathers) Cowboy Glaze; Gold glimmer mist; Distress Inks: Antique Linen; Peacock Feathers; Cracked Pistachio; vintage photo; Brick stencil template; Creative Embellishments Chipboard; (photo corners and leaf flourish) White Sand Texture Paste; Gesso; Gold Alchemy Wax; Tim Holtz Photo Frame; Chipboard title.

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

For more tips on creating with the Wildwood Cottage collection, watch the tutorial at https://youtu.be/g8WLXE8hLRk.

For more tips on creating with the Classic Rose collection, watch the tutorial at https://youtu.be/Z8P070kC3oo.

Instructions: Prep 10 x 10 inch deep edge canvas with gesso; heat set to dry. Using texture paste and stencil apply to sides and random areas of the top; do not worry where the 8x8 corrugated cardboard will go as it will just be covered up, so concentrate on outside edges and sides of canvas. Heat set to dry. When dry use the Art Anthology mists Sand and Peacock Feathers to color the canvas; I also used the cowboy glaze to add additional color. Gold Alchemy wax was used too. Do the same to an 8 x 8 inch piece of corrugated cardboard' chipboard

Stamp and cut out two of each of the heartfelt love borders on Canson watercolor paper. Adhere together to make the die thicker, paint with gesso; and apply same techniques as above canvas.

Ink the Tim Holtz photo frame with vintage photo; dab some sand mist on as well as gold alchemy wax. Do same for the chipboard title.

Stamp and cut using coffee archival ink classic rose die and stamp and cut out two sets of the 9 set of wildwood florals and two sets of the trio set of florals. Color with distress inks starting with vintage photo in the center; outline with antique linen and lightly do edges with pistachio.

Pierce the flowers with the paper piercer to make room for the gold stamens; mold flowers and three sets of the classic rose vine, one will be left flat as shown on right side of the canvas. Attach stamens after molding flowers and add some diamond dust and Crystal Clear for detail.

Wrap the Heartfelt Love border die around the photo frame as shown, adhere down. The longer border die will go just under the corrugated cardboard on the right. Begin to assemble the canvas placing cardboard down first, then photo frame; add chipboard to top and bottom right corner. Create clusters of the wildwood florals using the classic rose on top of the vine chipboard. Insert 4x7 photo into the photo frame. Detail rest of canvas with gold alchemy wax and Crystal Clear. Feel free to add cowboy glaze for detail on bricks if needed. Complete canvas as shown.

Other Products: Wink of Stella, Burlap String, Pearls, CTMH Ink- Chocolate, Cardstock (White, Green), Stickles (Yellow, Teal), Chameleon Colored Pencils (202, 501, 701, 302, 2302, 401, 502, 1601, 1602, 1501, 202, 2301, 901), Scrapbook Adhesives by 3L (#d Foam Squares 1/4", Extreme Double Sided Tape 1/8", Adhesive Dots Micro)

For more tips on creating with the layered card & shadowboxes, watch the tutorial at https://youtu.be/DrMIKI-XTmI.

Instructions: First cut the 6x6 card layers. Find and cut out the 6x6 background layer that I used for the front of the card. The next layer is the wood grain pattern. The third layer is the coral patterned paper. The fourth layer is the cream patterned paper. The bottom layer is teal water patterned paper. Use the appropriate sized circle dies to cut out each layer of the card. TIP: I will often trace the card openings onto the patterned paper for easier die placement. Adhere each layer to the appropriate layers of the card. Using 3D Crystal Lacquer, I added Prills to the top of the card front. Then added brown Prills to the bottom sandy portion of the card front.

Stamp and die cut 1 porthole. Add color using Chameleon Colored Pencils. I used brown for the inner portion of the circle and blended with the others (2302, 401, 502). Adhere the porthole to the fourth layer of the card using 3D foam. Stamp and die cut 1 small and 1 large koi fish using brown ink I used Chameleon Colored Pencils to add color to them. I started with the darkest shades and worked to the lighter shades blending as I went (202, 501, 701, 302). Shape and adhere the small koi to the middle of the bottom layer of the card using 3D foam. Adhere the large koi fish in the bottom right hand corner of the card front.

Stamp and die cut 1 seahorse and 1 set of the mini seashells with brown ink. Add color using Chameleon Colored Pencils. I used blues and browns for the seahorse and added teal Stickles for a little sparkle (502, 501, 1601, 1602, 1501). Shape the seahorse and adhere to the top left hand corner of the card front using 3D foam. Add color to the shells. A little pink in the oyster shell, pinks and creams to the starfish, browns and creams to the coil shell (502, 202, 2301, 901). Add a pearl in the oyster shell.

Hand cut pieces of green and teal patterned paper to create the seaweed. Adhere to the different layers of the card openings. Find and die cut out 3 mini tags and adhere to different layers of the card. Add burlap string bows to each.

Other Products: Art Glitter Ultrafine Transparent - Orange Crush and Lemon Yellow; Want2Scrap 72 Count - Orange Rhinestones; Want2Scrap 72 Count - Turquoise Rhinestones; Ranger Stickles - Yellow

For more tips on creating with the Young at Heart collection, watch the tutorial at https://youtu.be/kmqAVM6ibfM.

Instructions: Begin by creating a 6" x 6" card base out of White Cardstock. Next cut a 6" x 6" card front from the Young At Heart Paper Collection and die cut the center image using the coordinating die from the Cut Mat Create 2A Die. Sponge outer edge of 6" x 6" design paper with Butter ColorBox Chalk Ink and then adhere directly to the card base. Next adhere the center die cut image to the card base with pop dots.

On White Cardstock with Tuxedo Black Memento Ink stamp the flowers from the Birds and Blooms Stamp Set and stamp the leaves from the Simply Classic Cling Stamp Set. Die cut all with coordinating dies. Using Stack and Store Daubers color the flowers petals with Tangelo Memento Ink and Butter ColorBox Ink and using a Fantastix add Cantaloupe Memento Ink to the flower centers. Color the leaves using Stack and Store Daubers with New Sprout and Bamboo Leaves Memento Inks.

Shape leaves and flowers with the Deluxe Flower Shaping Kit and then using Dries Clear Adhesive adhere flowers and leaves, cutting to fit as needed, to card front as shown. With Dries Clear Adhesive add yellow prills from the Bright Idea Prills Set to the flower centers and Orange Crush Glitter to the petals. With Dries Clear Adhesive and the Metal Glue Tip add Lichen Glitter to the leaves and Lemon Yellow Glitter to the airplane. Add Yellow Stickles to centers of the blue flowers on the design paper as desired. Adhere Orange and Turquoise Rhinestone to bottom left corner of the card, as shown.

Other Products: Abandoned Coral Distress ink, Ebosser, Clarity Stencil Brushes, Pick me Up, rhinestones & pearls.

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: Create a 4 1/4" x 5 1/2" white card base. Ink it with Abandoned Coral Distress ink using Clarity Stencil Brush use heavy color application on the right side to get the ombre effect.

Die cut white cardstock using both the dies from Sweetheart Borders Die. Ink the thinner border die cut using Abandoned Coral Distress ink & Stack and Store Daubers. Adhere both the die cuts as shown. Add some rhinestones & pearls to the die cuts using Pick me Up for finishing touch.

Other Products: Archival ink-Plum, Fern Green, Rose Madder, Buttercup, Jet Black, gold embossing powder, Versamark ink, Distress ink-Peeled Paint, Aged Mahogany, clear embossing powder, Jute ribbon.

To see how to shape the roses, watch the video at https://youtu.be/Z8P070kC3oo.

Instructions: To view a larger photo of this project, see here. Cardstock Tag size is 4"x7.5". Create a background mixing Distress ink using Peeled Paint, Aged Mahogany and then stamp Forever Love Background Cling Stamp with Versamark ink, heat set using clear embossing powder and then use Distress ink on the edges to give some depth using same colors of Distress ink.

Now cut three dies from the Gift of Love die and then color them with Archival ink -Plum and Gold 3D Stamp Paint and paste them on the bottom left and then centre right and top left.

Then on the edges of the tag apply Versamark and then sprinkle gold and embossing enamel-Aged Ivory and heat it with heat it craft tool.

Now cut 2 eyelet edge heart shape die and stamp the sentiment from the Today's Quotes Cling Stamp set with Jet Black and on the edges of the heart die apply Versamark and sprinkle the Embossing Enamel -Aged Ivory and heat it with heat it craft tool. And adhere it with the foam tape on the left side of the tag as shown.

Stamp the flowers with the Classic Rose Cling stamp using Archival ink Rose Madder, die cut with the coordinating die and colour them Rose Madder and Buttercup and shape them with Deluxe Flower tool kit. Add dries clear adhesive and sprinkle Crystal Clear on the petals. Stamp the leaves with Classic Rose Vines Cling Stamp set using Jet Black Archival ink and cut them out with the coordinating die and color them with Archival ink-Fern Green and Rose Madder. Shape using the deluxe flower shaping kit.

Once all these flowers and leaves are ready, assemble them and adhere to the tag as shown. Add jute ribbon to the top of the tag.

Other Products: 7gypsies Mini Vintage ATC Crate - White; Bazzill Cardstock; Tim Holtz Distress Ink - Walnut Stain and Salty Ocean; Mod-Podge; Beige, Cream and Teal Seam Binding; Scor-Tape; Want2Scrap 72 Count - LeCreme Pearls; Want2Scrap Swirls Finesse - Brown; Want2Scrap Swirls Finesse - LeCreme; Want2Scrap 6" Sleek Strip Pearls - LeCreme; The Robin's Nest Tear Drops - Beaches; The Robin's Nest Dew Drops - Early Dawn

For more tips on how to create with the Botanical Rose floral from the Butterfly Medley Collection, watch the tutorial here. 

Instructions: Decorate the sides and bottom of the mini crate using design paper from the Everyday Heroes Paper Collection, adhering it to the crate using Mod-Podge. To decorate the ends of the crate, die cut the brown design paper twice with the round window die from the Everyday Hero Die Set and adhere to ends of crate with Mod-Podge. Adhere LeCreme Pearls to die cut as shown.

With Walnut Stain Distress Ink on cream design paper stamp the "We Will Remember" sentiment from the You Inspire Me Stamp Set and die cut with the buckle die from the Everyday Hero Die Set and on blue design paper stamp the "You Inspire Me" sentiment and the arrow from the Everyday Hero Newsprint Stamp Set and die cut with the coordinating die from the Everyday Hero Die Set. Adhere to end of crate, as shown.

To create the flowers to decorate the end of the crate, with Walnut Stain Distress Ink stamp the flowers on beige design paper and stamp the leaves on green design paper using the Botanical Rose Stamp Set. With Salty Ocean Distress Ink stamp the daisies using the Delightful Daisies Stamp Set and die cut all with coordinating dies. Shape the petals and leaves using the Deluxe Flower Shaping Tools and add prills from the Spring Bling Prills set to each flower's center with Dries Clear Adhesive. With Dries Clear Adhesive adhere flowers to the one side of crate as shown.

With Dries Clear Adhesive add a touch of Crystal Glitter to the flowers, leaves and design paper.

For more photos, visit my blog here.

Other Products: Bazzill Cardstock; Tim Holtz Distress Ink - Walnut Stain and Salty Ocean; Mod-Podge; Beige, Cream and Teal Seam Binding; Scor-Tape; Want2Scrap 72 Count - LeCreme Pearls; Want2Scrap Swirls Finesse - Brown; Want2Scrap Swirls Finesse - LeCreme; Want2Scrap 6" Sleek Strip Pearls - LeCreme; The Robin's Nest Tear Drops - Beaches; The Robin's Nest Dew Drops - Early Dawn

For more tips on how to create with the Botanical Rose floral from the Butterfly Medley Collection, watch the tutorial here. 

Instructions: See a sample of the inside of the album here. To create the mini album use the design paper along with the Scor-Pal and corner rounder to create the album cover. Create the pages using Bazzill cardstock along with the Scor-Pal and secure the pages in the album using Scor-Tape. Add photos and decorate the pages with dew drops and bling, as desired.

Using the tag die from the Luggage and Tags Die Set die cut the hole reinforcements, large tags and the small "courage" tag. On one of the tags stamp the "In the face of adversity . . ." statement from the You Inspire Me Stamp Set. Decorate the other tags with images cut from the design paper. Adhere the hole reinforcements to the tags and then add seam binding to each tag. Create a pocket for the tags on the back page of the mini album.

To create the flowers to decorate the cover of the mini album, with Walnut Stain Distress Ink stamp the flowers on beige design paper and stamp the leaves on green design paper using the Botanical Rose Stamp Set. With Salty Ocean Distress Ink stamp the daisies using the Delightful Daisies Stamp Set and die cut all with coordinating dies. Shape the petals and leaves using the Deluxe Flower Shaping Tools and add prills from the Spring Bling Prills set to each flower's center with Dries Clear Adhesive. With Dries Clear Adhesive adhere flowers to the cover of the mini album, as shown.

With Dries Clear Adhesive add a touch of Crystal Glitter to the flowers, leaves and design paper throughout the mini album, as desired.

For more photos, visit my blog here. 

Other Products: Archival Black, Plum, Library Green, Smooth White Card Stock, Black Card Stock, Tacky Tape, Glossy Accent, Score Board, Peacock Feather and Peeled Paint Distressing Ink, Zig Markers, Water Color Brush

For more tips on creating with the border dies & foldout cards, watch the tutorial here. For more tips on creating with the layered card & shadowboxes, watch the tutorial here.

Instructions: Follow Emma's video to first construct the layered card. Choose the papers from the Winking Frog Paper Collection for all the pages. Once you have decided the papers, stick them back to back with low tack tape and tape down the Eyelet Oval die in the center and run through the die cutting machine. Once all the papers are cut, glue them with the tacky tape or the adhesive that dries clear. Distress all the edges including the cut window with Peacock Feather Distressing Ink.

Stamp the various images from the stamp collection on smooth white cardstock with black archival ink.Cut all the images using their coordinating dies and color them using Zig Brush Markers. All the images are then dressed up with Crystal Clear Powder with the help of adhesive that dries clear

For the flowers, stamp the images from Water Lily Cling Stamp Set with Archival Plum and paint it using Colorbox Berrylicious. Cut the images with its coordinating die and shape the flowers as taught by Emma Lou. Leaves are stamped with Library Green and colored using Fern Green and Leaf Green Archival Ink.

Cut 2 pieces of Ornate Borders and Pocket Die from black cardstock and sandwich a light blue pattern paper between both pieces. Glue all the three and tuck the die element as shown.

Decorate the inside of the album with cut images from the paper collection and few painted images creating a scene. For more images of the album, visit my website www.rajnichawla.com

The seam binding ribbon is used to create the closure of the album.Cut the desired length of the ribbon and rub Peeled Paint Distress ink. Sprinkle some water and heat set it.

The back page of the album has a pocket which is created using Delicate Basic Border die. For this cut a strip of 3 inches and cut the top edge with Basic Border Die. Cut the lacy border from black cardstock and glue from the back of the pocket.The back page of the album has a pocket which is created using Delicate Basic Border die. For this cut a strip of 3 inches and cut the top edge with Basic Border Die. Cut the lacy border from black cardstock and glue from the back of the pocket.

Other Products: Glossy Accents. Purple flower pearls from Dress My craft, Acetate sheet,

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

For more tips on creating with the pocket dies, watch the tutorial at https://youtu.be/uDhKUj9AAMo.

Instructions: The card base measures 6 inches by 6 inches. To make this, cut  white card stock 12 inches by 6 inches and score at 6 inches on the longer side. Fold to make a top folding card. Cut pattern paper from paper collection, a little smaller than the card base and adhere to the card front using clear glue.

Cut out a pocket from the pattern paper using the scalloped border from border die and adhere to the base of the mat layer, leaving the opening to insert tags.

Cut the decorative dies and the eyelet border dies from white card stock and adhere the decorative die cut on the top of the mat layer and adhere the border die cut matching with the pocket on the card front. Cut a doily die cut and adhere to the card front. Cut two from Furry friend die set. Cut out a small window from the first circle die cut. Stamp the round sentiment from the stamp set with black ink. Adhere a small piece of acetate sheet to cover the window from backside. Add the foam strip all around the window on the back. Lay this on the flat surface facing down. Add flower pearls and cover with the second circle piece. Adhere this shaker element on the doily die cut.

Stamp the flowers in purple and red ink from Buttons and Blooms collection. Stamp the image from the patchwork daisy collection using Library Green for leaves and purple and red ink for flowers. Sponge daubers can be used to color flowers. Cut with matching die. Shape the flowers on the flower shaping tool kit with groove tools. Add colored stamped images from the patchwork daisy collection around the shaker element. Add the images on the top of the card front. Add the flowers on them. Stamp and cut some buttons. Shape them and adhere in the flower centres with glossy accents. Apply glossy accents and glitter.

Cut two tags from the tags die set. Add the buttons on top and add the tags inside the pocket.

Other Products: white card stock, paper trimmer, white gel pen, assorted buttons, scissors, foam tape

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.

Instructions: Create a card base from white card stock measuring 5" x 7". Next select the patterned papers you wish to use in your background. Die cut a curved eyelet edge onto one larger piece of paper using the Eyelet Border Basics Die. Next, measure out the approximate sizes you will need for the other two layering pieces, both will remain having straight edges.

Die cut an eyelet trim border piece from white card stock that coordinates with curve of the piece of patterned paper. Adhere it to the back of the patterned piece as a second eyelet layer using dries clear adhesive as shown.

Die cut the lace like accent piece from the Sweetheart Borders Die from white cardstock. Trim down to the size you wish to use as accent on background. Adhere to back of layering piece using a dries clear adhesive as shown.

Adhere your layering pieces to the card base as shown, beginning with the center most section so the other die cut accents overlap.

From white card stock, die cut the large frame from the Intricate Swirls Frame Die, and one banner from the Arrows and Banner Die. Using Ranger Archival Ink Pad - Jet Black, stamp sentiment found in the Cheerful Note Sentiments Cling Stamp Set. Using Stack and Store Dauber, ink all edges of banner using Ranger Archival Ink Pad - Deep Purple.

Using a dimensional foam or pop dots, adhere frame and sentiment banner to card front as shown.

Stamp one inking of each of the illustrations found in the Patchwork Daisy Border Cling Stamp Set, onto white card stock using Ranger Archival Ink - Deep Purple. Color leaves on all stamped images using Stack and Store Daubers and Ranger Archival Ink - Leaf Green. Color daisies on large border die cut using Stack and Store Daubers and Ranger Archival Ink - Forget-Me-Not. Color smaller daisy flourish flowers using Ranger Archival Ink - Deep Purple. Die cut all images using coordinating dies. For large daisy border embellishment, using a scissor, snip entire border free so you have a free standing embellishment. Shape all embellishments slightly using Deluxe Flower Shaping Kit.

Stamp one inking of the mid sized and smaller daisies found in the Buttons and Blooms Cling Stamp Set, onto white card stock using Ranger Archival Ink - Deep Purple. Color two smaller blossoms using Ranger Archival Ink - Buttercup, and one mid sized flower using Ranger Archival Ink - Cactus Flower. Die cut using coordinating dies, and shape slightly in the center using your Deluxe Flower Shaping Kit.

Adhere smaller daisy flourish to top of card front, and larger flourish to bottom. Adhere daisy border die overtop as shown. Layer small yellow daisy flowers over daisy images on top and bottom of border, and the larger pink flower in center.

Using a dries clear glue, apply glitter to all leaves and petals. Lastly, using a white gel pen, add stitching to straight background panel as shown

Other Products: Smooth White Cardstock, Zig Clean Clear Brush Markers, Glossy Accents, Twine, Rajni Chawla's Twinkling Spark.

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.

Instructions: The ready top-fold card from smooth white cardstock measures, 7 1/2" by 6 1/4". The first layer is created using smooth white cardstock measuring 5 3/4" by 7". The right side of the card is scored horizontally, each time at 1/8 of an inch.

To create the top fancy panel of the card, cut 2 pieces of lace from white cardstock, keeping eyelet dies on both the edges of the fancy border. Cross the borders from the center and tightly glue the top and the bottom edge. Choose a teal color paper from the paper collection and cut it measuring 5" by 6 3/4". Glue the ready lace border on right side of the teal panel as shown. While the glue was wet, snip the teal paper keeping the cut little inside of the white fancy border edge. Layer the teal panel on the scored panel and further layer it on the ready card base.

Stamp 2 pieces of right daisies from Patchwork Daisy Cling Stamp Set and 2 large blooms from Buttons and Blooms Cling Stamp Set, using black archival ink. Cut the images using their coordinating dies. Paint the images using Zig Clean Clear Brush Markers, Also stamp, cut and paint 2 large buttons for the larger blooms. Add a glossy accent to the buttons for extra accent.

Once all the elements are ready, assemble the card as shown and complete it by adding sentiment tags from the paper collection. Also, add Twinkling Spark to add some shine to the final card.

Other Products: Cardstock White, ColorBox Ink (Candy, Dandelion, Violet, Pixie Mauve, Seaweed, Green Apple), Distress Oxide Ink (Broken China, Faded Jeans, Spiced Marmalade), Gems, Enamel Dots, Scrapbook Adhesives by 3L (Crafty Foam Tape, 3D Foam Squares, Adhesive Dots Micro, Adhesive Dots Medium, E-Z Runner Grand, Dual Tip Glue Pen), Tonic Paper Distresser

For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

Instructions: White cardstock is the background 12 x12". Cut a piece of the blue patterned paper that is 12 x 8", mat the edges in white cardstock, and then add a narrow strip of the pink striped patterned paper. Adhere to the middle of the white cardstock. Cut a strip of green patterned paper that is 1.5 x 12" and adhere to the left hand side of the layout. Find and cut out the circle stripe strip, and adhere that near the bottom of the blue patterned paper section.

Find and cut out the flower bordered frame. I fussy cut out the inside edge. Cut your photo to fit behind the frame. Adhere the frame on top of the photo using 3D foam squares. Mat the framed photo in white cardstock and distress the edges. Adhere to the layout using crafty foam tape. Die cut 1 of the Arianna Lace image from white cardstock, and cut into pieces. Add a piece above and below the matted photo. Add gems to these pieces.

Die cut the bird cage image from white cardstock and adhere to the right hand side of the matted photo. Add gems. Find and cut out the purple bordered journal block, and adhere to the top and bottom of the green patterned strip using 3D foam squares. Find and cut out the "Everyday Moments" sentiment and adhere to the right of the matted photo using 3D foam squares.

Stamp and die cut 1 of the Leafy Accents large clusters using dark green ink (Seaweed). Add color using ink and daubers, light green ink (Green Apple). Shape the leaves using 3D Leafy Accents Shaping Mold. Stamp and die cut 1 Patchwork Daisy vine image onto white cardstock using dark green ink, and add color to the vine and leaves only using light green ink. Shape the leaves and adhere to the right of the matted photo just under the birdcage.

Stamp and die cut 1 set of the large Buttons & Blooms using dark purple ink (Violet). Stamp and die cut 2 sets of the medium Buttons & Blooms, 1 using yellow ink (Dandelion) and 1 using the same purple ink as before. Stamp and die cut 1 set of the small Buttons & Blooms using dark pink ink (Berrylicious). Add color to the flowers using ink and daubers. Pink (Candy), Purple (Pixie Mauve), Yellow (Dandelion). Stamp and die cut sets of buttons in the following colors: Orange (Spiced Marmalade), Teal (Broken China), Yellow (Dandelion) and Purple (Violet). Add color to the button using ink and daubers and the following colors: Pink (Candy), Teal (Broken China), Yellow (Dandelion), Purple (Pixie Mauve), Orange (Spiced Marmalade).

Shape the flowers using the 3D Floral Basics Shaping Mold. Assemble the flowers and add a button to the middle of each flower. Add liquid adhesive to each button and let dry. Add the flowers to the vine and to the left hand side of the matted photo. Add leaf pieces around the flowers.

Other Products: White card stock, purple card stock, pearls, buttons, floss, acetate, embossing folder (cuttlebug).

For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

Instructions: Card size: 4 1/4 x 5 1/2". Cut white card stock 5 1/2 x 8 1/2" and fold in half to make a card base. Cut curved border on front of card only with the eyelet edge from eyelet Border Basics. Cut 2 pieces of decorative paper 4 1/4 x 5 1/2". Glue 1 to the inside of card and cut the second with the curved plain edge from the Eyelet border Basics die. Before gluing paper to the front, glue a piece of acetate to the front. Glue die cut piece of paper to the front of card on top of acetate leaving the white eyelet to show for a border. Cut a white panel for the left side of front, die cut with eyelet edge and also the inlay decorative curved die. Use an embossing folder on the plain part of white card stock. Instead of running it through a die cutting machine just use a hammer to hit only the portions you want a pattern on. Glue to left side of front and add pearls.

Stamp Patchwork Daisy Border and Patchwork Daisies using Leaf Green then sponge color with Chartreuse. Stamp Buttons and Blooms flowers using Magenta Hue, Forget Me Not and Majestic Violet inks. Die cut and sponge color. Stamp sentiment using Majestic Violet and die cut with oval then die cut larger oval from purple paper. Glue Daisy Border to front of card along decorative paper border. Glue sentiment to purple then to inside of card towards the left.

Glue the vine around oval cutting where necessary. Glue Buttons and Blooms flowers to border on front and vine inside. Thread buttons with floss then glue to the inside of flowers.

Other Products: White card stock; Memento Dye Ink Pad, Pear Tart; Ranger Archival Ink Pad, Pale Ochre; glossy accents; Stickles, Diamond; Wink of Stella, clear; seam binding; foam tape

For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.

Instructions: For card base, cut a piece of white card stock 11" x 6", fold in half to create 5 1/2 x 6" side fold card. Cut a piece of green design paper, 5 1/4" x 5 3/4", add to card front. From purple design paper, cut a piece 5 1/8" x 2 1/2". Die cut one edge with the smaller Eyelet Border Basics Die. From a 5 1/8" x 2 1/2" piece of white card stock, die cut using the larger Eyelet Border Basics Die. Adhere the two pieces together. Cut the card panel from the design paper and add to the Eyelet Border piece. Add to card front. Add diamond Stickles around the purple paper. From white card stock, die cut the doily in the Butterfly Kisses Decorative Die set. Die cut the 2 1/2" circle from the Eyelet Circle & Basics Small die from white card stock. Stamp the sentiment on the right side of the circle with Jet Black. Sponge the edge with Pear Tart and then adhere to the doily. Add diamond Stickles around the edge. Add to the card.

Stamp the flowers and buttons on white card stock with Bamboo Leaves and Magenta Hue, sponge each with the same inks. Also stamp a set of buttons with Pale Ochre. Cut off the Magenta Hue flowers, shape with the Flower Shaping Essentials tools. Add the stamens to the 2 smallest flowers and a Pale Ochre button to the center of the larger flower. Add the green floral piece to the card and then add the flowers. Highlight with diamond Stickles and Wink of Stella. Add the seam binding bow to the flowers. Add the 3 buttons to the right side, adhering one with foam tape

Other Products: White, blue, yellow and rose colored cardstock, tiny buttons.

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4. 

Instructions: Prepare a 5 x 7" white card base. On one end stamp the Patchwork Daisy border image in black ink, use the matching die and cut out. Color the flowers and leaves with the Sunflower, Emerald Green, Forget me not and Vibrant Fuchsia inks. Stamp the Buttons and Blooms flowers on the colored paper with black ink, cut out with the coordinating die, shape using the Flower shaping kit and adhere to the top of the flowers and add Prills to the center and glitter to the petals.

Cut a piece of the Patchwork Daisy paper 5 x 7", cut the side off using the Eyelet border basic die, and adhere to card.

Die cut the tag and corner pieces out with white cardstock, stamp the sentiment in Blue, add foam dots and adhere to card. Add tiny buttons to the tag. To complete the card, add matching paper to the inside as shown.

Other Products: Score board, die cutting machine, string, scissors, clear embossing powder, Purple Encore ink

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

Instructions: Card size is 4 1/4 x 5 3/4". Cut white cardstock to 8 1/2 x 5 3/4", score at 4 1/4. Cut turquoise designer paper to 4 1/4 x 5 3/4". Ink edges with Paradise Teal ink and adhere to card front. Cut striped designer paper 3 3/4 x 5 5/16", ink edges with Magenta Hue ink. Ink edges with Majestic Violet ink, adhere on card front using foam dots.

Using white cardstock die cut Eyelet border on the left and right side of cardstock to create a shape of your choice. Stamp stitched background using Encore Purple ink and sprinkle with clear embossing powder. Heat Set.

Stamp both swirling patchwork images using black ink, color with Pink Peony, Rose Madder, Buttercup, Sunflower, Vivid Chartreuse, Leaf Green, Olive inks and die cut with coordinating dies. Shape with Flower Shaping kit. Stamp buttons using black ink and die cut. Color with Pink Peony and Rose Madder inks. Die cut additional buttons and adhere together to make a thicker button. Cut small strips of string and glue on top of buttons to make it appear like thread is in the buttons. Apply Crystal Lacquer on buttons and allow to dry.

Using scissors to cut sentiment from paper, color with Majestic Violet ink and adhere onto card front using foam dots. Die cut arrow die from green designer paper, ink with Leaf Green ink. Adhere pieces as shown. Finally add Crystal glitter.

Other Products: Seam binding ribbon, twine, yellow marker

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

For more tips on creating with the pocket dies, watch the tutorial at https://youtu.be/uDhKUj9AAMo.

Instructions: Click here to view a larger photo of this project. Create the gift bag using the pattern found here with lavender paper from the Patchwork Daisy Paper Collection. Cut out two of the Ornate Pocket Accents Die in white cardstock by combining the two large dies without the separating dies. Adhere one to each side of the gift bag as shown.

Stamp 2 of the left facing and 4 of the right facing Patchwork Daisy in black, sponge flowers with Sweet Plum, color centers with yellow marker and sponge leaves with Fern Green and cut out with corresponding dies. Adhere two layers together for dimension, add Crystal Clear glitter and adhere to bag on the Ornate Pocket Accents Die. The left-over flowers will be cut apart and used on the tag.

Stamp buttons from the Buttons and Blooms set in black, cut out with coordinating dies and sponge with Buttercup and Leaf Green inks. Cut out extra buttons with the Buttons and Blooms Die and glue multiple layers together to give the buttons a realistic thickness. Sponge the sides with ink and cover the buttons with 3D Crystal Lacquer. Adhere buttons to the flower centers and to the end of each handle on the bag.

Create a tag using the Ticket and Tags Die. Cut the larger tag in white cardstock for writing your greeting and cut the blue tag out of the paper collection, as well as the tag topper. Adhere the extra flowers created to the tag, a sentiment from the paper collection and a seam binding bow. Tie the tag to the bag handle with twine.

Other Products: White Cardstock, Hot Glue Gun, Dimensional Tape

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.

Instructions: My card size is 4 1/4 x 5 1/2". Make card base and cover the inside of the card with a piece of the paper collection. Also cut a strip of the same paper 1" wide to go on the front of the card. Cut out the decorative piece from the Ornamental Tags Dies and glue to the fold of the card and then lay the 1inch piece of paper over that and glue it down.

Stamp the card front with the Patchword Daisy Cling Stamp and run the card front and the Patchwork Daisy Border die through the Sizzix machine. Next color the greenery of the stamped image with the Dove Blender pen and ink.

Stamp the flowers and buttons using inks and cut out using the coordinating die. Shape the flowers and then glue the buttons to the centers of them and set aside to dry. Once dry glue to the curved front of the card. Locate a tag and cut out using the coordinating die and use dimensional tape to adhere to card front.

Other Products: White card, blackberry bliss cardstock, balmy blue cardstock & berry burst ink (stampin Up!), black ink, Plum twist Pixie powder, summer sky chalk cloud blending ink, clear embossing powder, transparent glitter, gems, wet glue, foam pads, coordinating yarn, black fine liner. Double sided tape

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

Instructions: Score a 15" x 7.5" piece of white card at 7.5" to create a square card base. Colour the edges using summer sky chalk cloud ink.

Cut a 7" square piece of blackberry bliss card stock and adhere onto the card base. Using the black fine liner mark "stitches" around the blue border on the card base.

Cut a 6.25" piece of paper from the pad and edge with berry burst ink, layer onto a 6.5" square piece of blue card and adhere these 2 layers onto the card base.

Cut a 4" x 3.75" piece of white card and spritz with water, sprinkle pixie powder over the card and add more water to create a shimmering background. When dry add blue chalk cloud ink to cover any white areas. Stamp the hand stitched background in black ink and mount the piece of card onto a slightly larger piece of balmy blue card. Adhere to the card base using foam pads.

Die cut the largest die from the botanic window set in blackberry bliss, then die cut the smallest die inside it to create the window. Die cut the middle die from the set using paper from the pad and adhere this to the back of the window using wet glue. Die cut a second window from the largest die and adhere this to the back of the window to give added strength to the piece. Add wet glue to the swirls of the window and cover in transparent glitter, tap off excess and allow to dry. Add gems to the centre of the small flowers of the window. Use foam pads to adhere the window to the stitched background.

Select and die cut the tags from the paper pad. Stamp the sentiment in black ink and cover in clear embossing powder, remove excess and heat to set. Edge with berry burst ink and tie a bow of yarn in each tag. Tuck under the window and secure with foam pads.

Stamp the floral swirls in berry burst ink on balmy blue card and on paper from the paper collection. Cover in clear embossing powder, remove excess and heat to set. Lightly shape the flowers and leaves then position onto the card with wet glue.

Other Products: White Cardstock, Purple Cardstock, Clear Drying glue, Ribbon, VersaMark ink, pencil colors, double sided tape

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

For more tips on creating with the pocket dies, watch the tutorial at https://youtu.be/uDhKUj9AAMo.

Instructions: Cut purple cardstock 12 x 7-1/2", score at 3", 7" and fold. Mat all the three flaps outside and inside using pattern paper from the paper collection, leaving 1/4 inch border.

Die cut white cardstock twice using Elegant Pocket Accents Die and mat with purple cardstock, adhere them to the sides of the outside flap with clear drying glue.

For gift card pocket - Cut pattern paper 2-1/2" x 7-1/4" and die cut using the slit die from the Decorative Pocket Accents Die set. Die cut white cardstock using the Decorative Pocket Accents Die and adhere it on top of pattern paper overlapping the slits. Next apply double sided tape to all the four sides of pattern paper and adhere on to the center flap. p> For the pocket on third flap cut white cardstock 3-1/2 x 5-1/2, score at 1/2 inch from three sides and die cut the upper part using Petite Pocket Accents Die. Mat with pattern paper. Apply doubled sided tape to the 1/2 inch space and adhere to the third flap. Die cut white cardstock using Petite Pocket Accents Die and adhere on the upper part of the pocket. For the tag die cut white cardstock using the largest die from the Album Tags and Accents Die and mat with pattern paper. Die cut white cardstock using the banner die from the Album Tags and Accents Die, sponge with Archival ink saffron and stamp with sentiment from the Just For You Sentiments Cling Stamp Set using Archival Ink Jet Black.

Stamp white cardstock with Patchwork Daisy Border Cling Stamp Set using Archival ink Jet Black, die cut using coordinating die and color with pencil colors.

For flowers stamp vellum sheets with Buttons and Blooms Cling Stamp Set using versa mark ink and heat emboss with Ranger's white embossing powder. Die cut the images using the coordinating die. Color the flower petals using Color box ink Concord. Shape the flowers using Groove Golf Tool. Apply Crystal Clear Glitter on flowers with clear dry glue.

Stamp white cardstock with Leafy Accents Cling Stamp Set using Archival ink - Library Green, die cut using coordinating die. Color the leaves using Archival ink - Olive and colorbox ink Olive Pastel. Shape the leaves using Leafy Accents Shaping Mold.

Arrange the flowers and leaves on the outside flap as shown and finish off with sentiment banner.

Other Products: Hot Glue Gun, Sponge, Misti, Big Shot Plus, Scissor, Dimensional dots, VersaMark, WOW Sparkling Snow Embossing Glitter, WOW Royal Crush Embossing Glitter, Swarovski Arora Borealis crystals, ribbon from my stash, Crop-A-Dile

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.

Instructions: Click here to see a larger photo of this project. Tag is 6 x 5". Using the largest tag die from the Album Tags and Accent Die, cut through two pieces of white cardstock so you have two tags. Adhere these together using dries clear glue to form a strong base for the tag. Using the same die, cut two pieces of the Patchwork Daisy paper collection. Adhere one piece to the front of the white tag, ink the edges of the second piece and adhere to the back of the tag. Using the two largest dies, cut a border from white cardstock, sponge with dries clear adhesive and sprinkle with Crystal Ultrafine Transparent Glitter. Set aside to dry.

Diecut vellum from the same die, stamp the border from the Patchwork Daisy Border Cling Stamp Set using VersaMark, sprinkle with WOW Sparkling Snow Embossing Glitter and heat set using the Heat It tool. Color the flowers and leaves using Magenta Hue, Majestic Violet, Forget-Me-Not and Vivid Chartreuse Archival inks and Stack and Store Daubers. Diecut using the coordinating die, shape lightly using the Deluxe Flower Shaping kit. Stamp, color, diecut and shape the two flourishes from the same stamp set in the same manor and add a Swarovski crystal to each of the little flower centers on one of the flourishes. Apply dries clear adhesive to the edges of the vellum border diecut and adhere to the tag.

Using the Buttons and Blooms Cling Stamp set, stamp the flowers and the buttons on vellum using VersaMark, sprinkle with WOW Sparkling Snow Embossing Glitter and heat set using the Heat It tool. Color the flowers and buttons using Magenta Hue, Majestic Violet, Forget-Me-Not and Vivid Chartreuse Archival inks and Stack and Store Daubers. Diecut using the coordinating die and shape using the groove golf tool set. See Emma Lou's video here to learn how to shape them. Adhere two petals together, making sure to offset, to create the flowers. Using a dimensional dot, add buttons to the flower centers. Adhere the flowers to the border as shown. Adhere the floral flourish with the crystals to the tag as shown. Cut apart the second floral flourish and a small flower to the border and some leaves at the top.

Stamp the arrow from the Hand-stitched Accents Cling Stamp Set on vellum using VersaMark, sprinkle with WOW Royal Crush Embossing Glitter and heat set using the Heat It tool. Stamp the sentiment in the same manner, heat set and diecut the arrow using the coordinating die. Shape slightly with your fingers and adhere to the tag as shown. Using a Crop-A-Dile make a hole in the tag, add an eyelet and a ribbon.

Die cut a pocket from white cardstock using the Ornate Borders and Pockets Die, sponge with dries clear adhesive and completely cover with Crystal Ultrafine Transparent Glitter and when dry, adhere to the back of the tag at the bottom. Adhere a section of the floral flourish to the top of the tag as shown. Diecut a tag from the paper collection using the Tickets and Tags Die, sponge the edges, Stamp the sentiment using Majestic Violet ink and add glitter to the design. Diecut a mat from white cardstock using the same die set and adhere the tag to the mat. Punch a hole in the top and add ribbon.

Hand write a message on the back of the small tag and place it in the pocket.

Other Products: Silver Pin, Lilac Ribbon, clasp, Hat Pattern, Cutting machine, glue gun.

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

Instructions: Click here to view a larger photo of this project. Find the cut file for the hat here. Using white cardstock and Rhubarb Stalk ink, stamp the 1 large 1 medium and 1 small Oakberry Lane Blossoms. Using Majestic Violet ink, stamp 3 large, 1 medium and 1 small Oakberry Lane Blossoms. Die cut with coordinating dies. Color the center of the flowers with Buttercup ink and the petals with Majestic Violet ink. Place blossoms in the 3D mold, spray them lightly with water and place the lid on, run through the machine. Layer 2 blossoms together of the large and medium blossoms, creating 3 layered flowers. Make a hole in the center of the flowers and pull the stamens through. On the small flowers use only 1 bead stamen in the center of each flower.

Stamp the small flower flourish from the Patchwork Daisy Border die with Tuxedo Black ink on white cardstock, color the flowers with Majestic Violet and the leaves with Leaf Green, die cut with the connected die. Cut the hat with paper from the paper Collection using your electronic die cutting machine and this https://www.silhouettedesignstore.com/view-shape/67665 cut file, reduce the size till you like it. Assemble the hat. Then take the ribbon and the clasp and place along the bottom of the hat and create a nice bow.

Cut the small flower flourish in half, and arrange flowers as shown. Finally add the silver pin.

Other Products: White cardstock. Big Shot Machine.

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.

Instructions: Card size 6" x 6" (final size). Take pattern paper from the Patchwork Daisy Paper Collection and tear the edges and adhere it to the card base. Cut two Petite Pocket Accents Die each on white cardstock and adhere it on card as seen on the picture. Add crystal clear glitter.

Next cut with die Delicate Eyelet Edging on the left and right side and a panel will be created as shown and adhere it with foam tape and then add sentiment from Just For You Cling Stamp set with archival ink-jet black.

Stamp two set of Patchwork Daisy on white cardstock with archival ink-jet black and cut them with coordinating die and color them with archival ink-leaf green and rose madder and then sprinkle crystal clear glitter using Designer Dries Clear Adhesive. Arrange them as shown.

Stamp one bloom from Buttons and bloom cling stamp with archival ink-jet black and cut it with coordinating die and color it with archival ink-sunflower, rose madder, cactus flower and add button stamp at the centre of the bloom with foam tape and then sprinkle crystal clear glitter using Designer Dries Clear Adhesive. Add this Bloom shown.

Other Products: White Cardstock, White Ribbon, Grape Jelly Memento Ink, Sap Green Archival Ink, Hot Glue Gun

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

For more tips on creating with the pocket dies, watch the tutorial at https://youtu.be/uDhKUj9AAMo.

Instructions: Click here to view a larger photo of this project. This card was inspired by Liz Gaze and the video she shared here. My card size is 4 x 6". Fold a piece of 8 1/2 x 11" cardstock in half and tape the tag die so it is resting with cutting blade just over the fold. When cut out this will make the card front and back together. Cut a piece of the paper collection using the smaller tag die and edge with ink. Glue down onto the front of the card.

Cut out the corner pocket die and sponge adhesive onto it and dip into the glitter. Allow to dry then glue to the bottom of the card front.

Stamp the leaves with Olive Green Stazon ink and then cut out using the coordinating die. Using the daubers add color to the leaves then place them into the Leafy Accents Mold and spritz with water. Run through the Vagabond 2 and then turn out to dry.

Stamp the flower petals with Grape Jelly ink and cut out using the coordinating die. Using the daubers, add color to the petals (Sap Green in the centers and Grape Jelly to the outer edges). Place the petals onto the mold, spritz with water and run through the Vagabond 2. Turn the petals out and allow to dry. Once dry, glue two together to form flower and add Prills to the centers. Allow to dry. Once dry, decide on placement of leaves and flowers and glue using the hot glue gun.

Using the Ticket and Tags die cut out small tags from the paper collection and tie ribbon through the holes. Slip the tags down into the corner pocket on the card front and it is ready to go.

Other Products: ribbon, pearls, white card stock, yellow card stock, dimensionals

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Card size: 5 x 7" from yellow Cardstock. Cut from white card stock: Eyelet Heart and plain edge heart for a frame, Decorative Oval, Intricate Swirl Frame Die and Ornamental Tag for sentiment. Glue frame to yellow folded card. Glue Decorative Oval to back of Heart frame and trim off excess. Pop heart up and place toward top of the frame. Set card base aside while you work on the flowers and leaves.

Stamp flower blossoms from the Arianna Collection using Vibrant Fuchsia then sponge with Buttercup in the centers and Vibrant Fuchsia on the tips, die cut and run through the Die cut machine using the 3D Basic Florals mold after misting with water. Take them out of the mold and continue pleating the tips with your fingers while still moist. Punch them down in the center with stylist tool (Deluxe Flower Shaping Kit) and let dry completely before the next step.

While drying, stamp Leafy Accent leaves with Fern Green and sponge with Vibrant Fuchsia and Leaf Green then die cut and run through machine with 3D Leafy Accents Shaping Mold. Now put flowers together by gluing 2 the same size as the base and then one smaller. Die cut stamen (Arianna die set) from Vellum and use your stylist in the centers to make the stamen stand up then add yellow Nuvo to each end. Let dry and glue to the center of flowers. Pierce center of flower with piercing tool and add a yellow beaded stamen. Glue the stamen to secure and when dry, cut off the extra wire on the back of flower. (Small flowers only have 2 layers, both small.

Glue leaves and flowers to the left side and bottom of the heart. Stamp the sentiment to the white label that was die cut using Vibrant Fuchsia ink and then glue each end to the heart frame. To finish, add a small fuchsia ribbon bow to the left bottom corner and pearls to each corner of the white frame. Add smaller pearls to the cross sections of the Decorative Oval inside heart.

Other Products: White cardstock, micro pearls, satin white cord, half cut pearls, vellum paper, VersaMark

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Ready top fold card measures 6" x 8.5" To prepare mats choose a pattern paper from the designer paper collection and cut a piece measures 5.75" x 7.75". Cut another piece of designer paper which is 1/16" inch smaller than the first one. Mat the paper on the ready card base. Die cut border from white cardstock using the Classic Border Basics die and adhere as shown. 

Stamp hand stitched background on vellum paper using VersaMark and heat emboss it with white embossing powder. Cut a frame from the white cardstock using hand stitched accents die. Glue the frame on the vellum paper. Also glue a piece of pattern paper on the backside of the vellum paper. Glue this frame on the ready card base as shown. Die cut the fan from white cardstock using the Frame a Card Leafy Borders die and adhere to the bottom right of the frame. Stamp a butterfly on vellum paper using VersaMark and heat embossit with white embossing powder and cut with coordinating die. Color the butterfly using cactus flower ink and glue it as shown.

Stamp blazing poppy flower on handmade paper using Red geranium ink and cut with coordinating die. Color the flowers using acrylic paints. Stamp leafy accents leaves and Rain Boots and Blossoms leaves on the flower making paper using olive green archival. Paint the leaves with leaf green archival. Shape leafy accents leaves using mold and rain boots and blossoms leaves using ball tool.

Arrange the flowers and leaves on one side of the frame and glue it using hot melted glue. Tie some bows using white satin cord and glue it. Stamp a sentiment using red geranium ink on white cardstock layer it on the pattern paper and glue it on the card. For the finished looked apply soft matte gel on the flowers and dust with glitter, also apply glue near the frame and flowers and add micro pearls.

Other Products: Zazz: Green, Pink Glitter Glue, Glue Gun, Arteza Watercolor Pens, Langton Watercolor Paper, Fabrico Pens

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Take one of the sheets from the circle layered card and the sheet from Patchwork Daisy set that has the 4 - 6 x 6" panels and cut. Cover your circle layered card sheet and take your circle diecut and cut. Now cover the opening with the clear cardstock sealing your stamped image inside the top and bottom layers. 

Now stamp and diecut your cardinals from the Holly Berry set with Stazon black ink. Let set for a minute then color with Arteza pens.

To create your flowers stamp and diecut 10 blossoms from the Oakberry lane set from the sheet of Patchwork Daisy paper. To shape your blossoms,  place them in your 3D mold. Now to add some extra color use the Imagine Fabrico pens in pink with a touch of some pink glitter to really bring your flower alive.

Layer the blossoms 2 to a bunch and use your piercing tool to pierce the center and add your stamens. Stamp and diecut your leaves from a sheet of green paper from the collection place in your mold to shape and add to your blossoms. Add a touch of glitter to your leaves to add some sparkle.

Other Products: White card for stamping/die cutting, Copic YG63 (leaves), Copic R27 (berries), Bazzill Maraschino, Bazzill White, Red Ribbon, Distress Glitter Rock Candy, Glossy Accents, Nuvo Glitter Pen,

See how to create elegant Christmas cards here. 

See how to create Christmas cards in 30 minutes or less here. 

Instructions: To see more step by step photos, click on my name at the bottom of my instructions and head over to my blog. Using your red cardstock, cut 2 base cards 5 12/16" x 12". Using a bone folder on piece 1, bone fold at the 7 5/16" and fold. On your second piece bone fold at 3 4/16" and fold and again at 3 4/16" and fold to create front step. Join the two pieces together in the middle to make the middle section equal 7 5/16".

Using white cardstock cut 2 mats 5 1/2" x 7 1/8". Cut 2 mats 5 1/2" x 3". Using your Festive Holiday Paper Collection, cut 2 mats 5 5/16'" x 7" and 2 mats 5 5/16" x 5 3/4".

Using white cardstock cut 2 die cuts using your festive Holiday die. Using white cardstock cut 1 die cut using your Window Box Elements die.

Using your Festive Holiday & Cardinal stamp, stamp 3 of each of the holly sprays and cut with coordinating dies. Color you Berries using either your R27 Copic pen. Color your leaves using a YG63 Copic pen. Shape using your Deluxe Shaping Tool Kit.

Using white cardstock cut 2 mats, 3 x 2 3/4" and 2 5/16" x 2" (cut a matching mat for the smaller white mat using your patterned cardstock 2 1/2" x 1 3/4"), and using your Festive Holiday Stamp set, stamp your "with love at Christmas time" on the bigger mat and the "For you at Christmas" on the smaller mat. Using 3d adhesive adhere your "For you at Christmas" sentiment to the matching patterned mat.

Using your off cut from your patterned paper (the white decorative fence panel) trim to 5 5/16" wide and fussy cut around the decorative fence panel. Using a second piece of cardstock from the paper collection fussy cut out the birdhouse.

On panel 1 adhere your white decorative strip to the bottom of the card and then adhere your holly sprays one to the left and one to the right and adhere your sentiment over the top. Tie a bow out of red ribbon and adhere to the top of the sentiment and adhere a holly spray in the center of the ribbon.

Using your Festive Holiday die cuts slide your "with love at Christmas" sentiment in between the two and adhere in place. Adhere 1 holly spray to the top center and adhere a red bow and then adhere another holly spray to the ribbon center. Adhere another holly spray to the bottom. Using 3d adhesive adhere to the top left of panel 3. Using 3d adhesive adhere your fussy cut bird house.

On panel 4 adhere your fussy cut decorative fence panel and adhere a holly spray in the bottom right on the fence line.

Using a Wink of Nuvo glitter brush pen highlight your holly leaves and your birdhouse. Apply glossy accents to the berries. Apply dries clear glue to your birdhouse and glitter with a glitter of choice to create a snow effect.

Other Products: Christmas assorted snow Irridescent/silver

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Click here to view a larger photo of this project. Cut O Holy Night Paper Collection and white cardstock using tag die from Album Tags and Accents Die using both sizes. Large adhere to white paper and the two others on both sides of tag. Cut one tag using smaller. Place on tag using 3d foam tape. Cut swirl Noel Ornament Die from white glitter paper and place under sentiment layer. Cut out sentiment using Silent Night Scroll Die white glitter paper and collection paper as shown and place using 3d tape.

To create Poinsettia & Holly Clusters, stamp three times different sizes and cut using the coordinating dies. Color with red and green pigment ink using sponge. Sprinkle water on and place in the Poinsettia Shaping Mold. Wait to dry. Add a little hot glue to the underside of the flower to adhere. Using paint brush paint ready flower with Designer Dries Clear Adhesive and sprinkle Crystal Ultrafine Transparent Glitter

To create the pine needles, stamp Snowy Pine Village Cling Stamp and Silent Night Scroll Die (to place under each flower) with Ranger Archival Ink Pad - Coffee, and color using StazOn Ink Pad - Olive Green and cut using the coordinating dies. Using paint brush, paint with Designer Dries Clear Adhesive and sprinkle with glitter.

Arrange flowers and leaves as shown. Add snow.

Other Products: Colored pencils, white sparkle paper

For more tips on creating with the Snow Kissed collection, watch the tutorial at https://youtu.be/Wu5Z81llDWE.

Instructions: Cut a 5 x 7" card base in white card stock. Cut blue designer paper from the Merry and Bright Paper Collection to fit card base. Cut the large frame die from the Eyelet Lace Frames Die in white card stock. Cut snowflake blue piece from same paper pad to fit inside frame, cut a piece of white sparkle paper with the Fleur Border Basics Die to make a snowy hill. Adhere all to card base

Stamp and sponge the medium and small trees from the Snow Kissed Spruce set in Olive, cut out with corresponding dies, and add Frosting Powder. Heat emboss snowflakes from the Snow Kissed Spruce on blue designer paper in white embossing powder and fussy cut them out.

Stamp the sleigh ride from the Snow Kissed Spruce set in Black and color with colored markers, cut out with circle die. Cut out the lacey circle from the Butterfly Kisses Decorative Die and adhere sleigh ride on top. Adhere trees, snowflakes and sleigh as shown.

ther Products: White cardstock. Distress ink-peeled paint, broken china, chipped sapphire. Mini mister.

For more tips on creating with the Snow Kissed collection, watch the tutorial at https://youtu.be/Wu5Z81llDWE.

For more tips on creating with the pocket dies, watch the tutorial at https://youtu.be/uDhKUj9AAMo.

Instructions: Card size 6"x 6" (final size). Create background with distress ink-peeled paint, broken china, chipped sapphire and mist water with mini mister and then heat it with heat it craft tool. Stamp snowflakes randomly with archival ink-manganese blue as seen on the picture.

Cut two Decorative Pocket Accents Die on white cardstock and adhere it on card as shown.

Add plain panel with distress edges on top of the Decorative Pocket Accents Die with foam tape to give some dimension as shown.

Stamp trees from Snow kissed Spruce cling stamp set with archival ink-library green and then cut them with coordinating die and color them with archival ink-leaf green and sprinkle frosting powder and heat them and arrange them as shown, using foam tape.

Cut one ornamental die on white cardstock and distress the edges and add sentiment from Celebrate love Sentiments, as shown.

Other Products: Creative Expressions Watercolour paper, Paper distresser, Windsor and Newton Artist Quality Paints Permanent Rose, Schmincke Watercolour Paints French Ultramarine

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

Instructions: Cut a piece of white cardstock 12" x 6", score at 6" along the long side and fold to create a base card of 6" x 6". Cut a piece of green patterned paper 6" x 6", distress the edges and adhere to the front of the base card. Cut a piece of buttoned patterned paper 5 3/4" x 4 3/4" and using the plain edge from the HCD1-7210 Eyelet Border Die set die cut the apertures as shown. Cut two borders using the eyelet edge and the patterned die from white cardstock and adhere to the previously cut pieces as shown. Distress the edges and adhere to the front of the card with foam tape.

Stamp the pocket image from HCPC-3850 Patchwork Pocket & Patterns Stamp set in Deep Purple ink on watercolour paper and colour with a purplish mix of the two watercolours before die cutting with the coordinating die. Adhere to the left of the card as shown. Stamp the arrow image from the HCPC-3851 Handstitched Accents Stamp set in Deep Purple ink on watercolour paper. Then stamp the Thinking of You sentiment from the HCPC-3851 Handstitched Accents Stamp set inside the arrow image. Colour with watercolour paint and die cut with the coordinating die. Adhere the arrow to the right of the pocket as shown.

Stamp the images from the HCPC-3853 Patchwork Daisy Border Stamp in Jet Black ink on watercolour paper. Colour with the Zig Clean Colour Brush markers and die cut with coordinating dies. Shape and add Crystal Clear glitter to the images with Dries Clear glue on a damp sponge, and adhere over the pocket and cascading over the arrow to the right of the card.

Stamp the flower images from the HCPC-3859 Buttons and Bloom Stamp set on the Super White cardstock in a variety of colours - Deep Purple, Forget-Me-Knot, and Magenta Hue. Colour the pink flowers lightly with Magenta Hue, blue flowers with French Ultramarine and the purple flowers with French Ultramarine inks and die cut with the coordinating dies. Shape with the Deluxe Flower Shaping kit, add Crystal Clear glitter to the flowers with Dries Clear glue on a damp sponge and then adhere over the leaves as shown.

Stamp the button images from the HCPC-3859 Buttons and Bloom Stamp set on white cardstock cardstock in a variety of colours - Magenta Hue and Forget-Me-Knot inks. Stamp more button images to from the ... in Jet Black ink on water colour paper. Colour the pink buttons lightly with Magenta Hue and the blue buttons with French Ultramarine inks, and the buttons on water colour paper with Zig Clean Colour Brush markers. and die cut with the coordinating dies. Adhere the buttons to the centres of the flowers - the pink buttons on the light blue flowers, the blue buttons on the pink flowers and the green buttons to the purple and blue flowers as shown.

Other Products: White cardstock, handmade flower making paper, zig markers, glitter, white satin cord, silver embossing powder, Versamark, Archival Sap Green

For more tips on creating with the pocket dies, watch the tutorial at https://youtu.be/uDhKUj9AAMo.

Instructions: Click here to view a photo of the template. Ready side fold card measures 7" x 7". To prepare mat, choose a pattern paper from the designer paper collection and cut a piece measuring 6.5" x 6.5 . Layer it on the white cardstock which is 1/16" of an inch bigger. Choose another pattern paper from the same designer paper collection and cut a piece measuring 6.75" x 6.75". Layer it on the ready card base. Cut a border from the white card stock and glue it on the right side of the card. Cut a piece of white cardstock to create a book using book template. Also cut a pattern paper in book template which is 1/16" of an inch smaller than the first one. Cut one more book template from the white card stock and stamp sentiment using VersaMark on it. Heat emboss the sentiment using silver embossing powder.

Layer all the book template and stick some baby pink stones as shown. Cut two decorative borders from the baby pink card stock and apply glitter on it. Glue the book and borders on the card base as shown. Stamp some sun kissed flowers using magenta hue ink on the handmade paper and cut with coordinating dies. Paint the flowers with the same ink and shape using groove tool.

Stamp leaves from leafy accents stamp on the flower making paper using olive green ink and cut with coordinating die. Paint the leaves using leaf green archival and shape them using shaping mold. Stamp some leaves from the garden's edge coneflower stamp using black archival on water color paper. Cut with coordinating die and color using zig markers. Arrange flowers and leaves with some extra stamens as shown.

Tie bows using white satin cord and glue them. For the finished look, apply glitter on the flowers using glue that dries clear.