Instructions:

Cut a piece of Deluxe Flower Shaping paper to 11 1/2 x 7" size, score and fold at 3 1/4" and 8 1/4". Using from the HCD2-7403 Fancy Flourish Border Die, diecut the outline edge on the right and left fold of card so that the folds interlock beautifully. Next cut two 3 1/4 x 7" size paper panels, 1 pink and 1 green from the Dazzling Dahlia paper collection. Use the same outline die to cut matching panels for the card folds. Place the green panel on the left fold and the pink the right fold of card. Cut another piece of the green paper to fit into inside of card and attach. Lightly sponge the green panel edges with Leaf Green ink and the pink panel with Pink Peony and Magenta Hue. Now diecut the decorative Fancy Flourish Border Die, left and right die twice from Deluxe Flower Shaping paper. Adhere the same die pieces on top of each other for beautiful dimension. Lightly sponge around the outer edges of diecut pieces with Pink Peony and Magenta Hue ink and then attach onto card folds using glue and dimensional adhesive.

Stamp the set of 2 twice and set of 6 rose petals three times from HCPC-3752 Classic Rose Cling Stamp Set in white pigment ink onto Deluxe Flower Shaping Paper. Sprinkle with Aged Ivory embossing powder and heat set with heat tool. Diecut with the matching dies. Stamp two the vining leafy accents and one of the set of 3 leaf from HCPC-3835 Leafy Accents Cling Stamp Set in Leaf Green ink onto Deluxe Flower Shaping Paper. Diecut with the matching dies. Stamp the Thinking of You sentiment in Magenta Hue ink, then cut words apart and sponge edges with the same ink.

Use the Stack and Store daubers to color the roses and leaves. For the rose petals, sponge both the backside and front with Pink Peony and Magenta Hue. Start from the center of petals and blend outward, leaving the edges of petals white. Sponge the leaves with Vivid Chartreuse ink, Leaf Green, and then lastly a touch of the Olive in center of leaves. Place the rose petals into the HCFB1-462 3D Rose Shaping Mold, stamped side down. Mist with water and send the diecutting machine. Follow the same process for the leafy accent using the HCFB1-467 3D Leafy Accents Shaping Mold.

Layer the rose petals together using hot glue. For the smaller rose buds, color some of the wire stamen with the Leaf Green ink. Pierce a hole in the center of small petals and thread stamen through, attaching with hot glue. Temporarily lay out the leaves and roses over the left fold of card to visualize placement. Then set them aside and sponge Leaf Green ink over the main and surrounding area of placement. This creates a shadow backdrop for a more dimensional look. Attach the leaves and roses using hot glue. Attach the sentiment as shown. Dab some Dries Clear glue onto a sponge, apply over roses, leaves and rest of card as desired, then sprinkle with Rajni Chawla’s Crystal Clear glitter and tap off.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine

Instructions:

Cut a piece of Deluxe Flower Shaping paper to 10 1/2 x 7" size, score and fold at 3 1/4" and 7 1/4". Using from the HCD2-7403 Fancy Flourish Border Die, diecut the outline edge on the right and left fold of card so that the folds interlock beautifully. Next cut a 3 1/4 x 7" size pink paper panel from the Dazzling Dahlia paper collection. Use the same outline die to cut a matching panel for the top opening fold and attach. Cut a piece of green paper to fit into inside of card, lightly sponge with Leaf Green ink and attach. Now diecut the decorative Fancy Flourish Border Die for the top opening fold twice from Deluxe Flower Shaping paper. Adhere the same die pieces on top of each other for beautiful dimension. Lightly sponge around the outer edges with Pink Peony and Magenta Hue ink. Attach onto top opening fold. Diecut the coordinating decorative piece from green paper twice. Layer these same pieces on top of each other, sponge the edges with Leaf Green ink and then layer onto a separate piece of 3 1/4 x 7" white paper. Use a paper trimmer to carefully cut off the lattice border edge. Set the border aside. Attach the other piece onto bottom fold of envelope card. Cut 1/2 x 1 1/2" paper shims and attach on the left and right of bottom inside of card, gluing the bottom fold on top to secure. This will create a little more depth for contents of card. Wrap green lattice border around the envelope card at an angle and attach. Use small magnets at the ends for a snap closure. For tips on how to use magnets on your project, check out this tutorial https://www.heartfeltcreations.us/video/preserve-special-memories-the-ez-way-with-insta-albums

Stamp the set of 2 twice and set of 6 rose petals three times from HCPC-3752 Classic Rose Cling Stamp Set in white pigment ink onto Deluxe Flower Shaping Paper. Sprinkle with Aged Ivory embossing powder and heat set with heat tool. Diecut with the matching dies. Stamp two of the vining leafy accents and one of the set of 3 leaf from HCPC-3835 Leafy Accents Cling Stamp Set in Leaf Green ink onto Deluxe Flower Shaping Paper. Diecut with the matching dies. Stamp the For my Friend sentiment in Magenta Hue ink, then cut words apart and sponge edges with the same ink.

Use the Stack and Store daubers to color the roses and leaves. For the rose petals, sponge both the backside and front with Pink Peony and Magenta Hue. Start from the center of petals and blend outward, leaving the edges of petals white. Sponge the leaves with Vivid Chartreuse ink, Leaf Green, and then lastly a touch of the Olive in center of leaves. Place the rose petals into the HCFB1-462 3D Rose Shaping Mold, stamped side down. Mist with water and send the diecutting machine. Follow the same process for the leafy accent using the HCFB1-467 3D Leafy Accents Shaping Mold.

Layer the rose petals together using hot glue. For the smaller rose buds, color some of the wire stamen with the Leaf Green ink. Pierce a hole in the center of small petals and thread stamen through, attaching with hot glue. Temporarily lay out the leaves and roses over the top opening fold of card to visualize placement. Then set them aside and sponge Pink Peony and Magenta Hue ink over the main and surrounding area of placement. This creates a shadow backdrop for a more dimensional look. Attach the leaves and roses using hot glue. Attach the sentiment as shown.

Dab some Dries Clear glue onto a sponge, apply over roses, leaves and rest of card as desired, then sprinkle with Rajni Chawla’s Crystal Clear and tap off.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine

Instructions:

Cut white cardstock to 9 x 6 3/8”, score and fold at 4 1/2”. Cut 3 pieces of paper from Floral Banners paper collection. Cut the pink piece from sheet 12B to 4 5/16 x 6 1/8” ink edges with Rose Madder and adhere directly onto card base. Cut aqua piece from sheet 9B to 4 1/16 x 5 7/8”, ink edges with Garden Patina ink and adhere onto card base using foam adhesive. Cut patterned piece from sheet 11A to 3 15/16 x 5 3/4”, ink edges with Garden Patina ink and adhere onto card.

Diecut two decorative pieces from HCD2-7326 Ornate Flourish Gateway die onto white cardstock, using a light hand, apply Rose Madder ink randomly using a Stack and Store Dauber. Adhere onto card using Dries Clear Adhesive, creating a slight bowed effect.

Stamp Climbing Clematis flowers from HCPC-3954 Clematis Cling Stamp onto Deluxe Flower Shaping Paper using Magenta Hue ink, diecut with coordinating dies. You’ll need 2 large petals, 3 medium petals and 3 small petals. Use Stack and Store Daubers along with Rose Madder ink to color front and backside of petals. Begin in the center of the flower then use the corner of the dauber to blend the color through to each petal. Stamp the leaves from same set onto Deluxe Flower Shaping Paper using Olive ink, diecut with coordinating die. Shape florals and leaves using HCFB1-5006 3D Clematis Shaping Mold. Pierce the center of flowers and insert fuzzy Bridal Bouquet Stamens, you’ll need 3 stamens for the largest flower, and 2 in the remaining flowers, apply hot glue to secure.

Stamp the images from HCPC-3969 Vining Clematis Banner Cling Stamp set onto white cardstock using Olive ink. You’ll need to stamp two of the bolder clematis banners. On one image, stamp sentiment using Garden Patina ink, die cut with coordinating die, on the second image, diecut using both exterior and interior coordinating dies. Using the second vining banner, stamp onto vellum using Versa Color White ink along with Bridal Embossing Tinsel, heat set. Stamp the same image onto white cardstock using Olive ink. Die cut both using the exterior and interior coordinating dies.

Color the banners using a combination of Stack and Store Daubers and Dove Blenders. Color vellum on backside. Use Stack and Store dauber to apply Vivid Chartreuse ink onto leaves, then follow up with Dove Blender to add touches of Leaf Green onto leaves and flower centers. Use Dove Blender to apply soft touches of Cactus Flower onto petals and buds. Finally, using a dauber and a light hand, add Sunflower ink along the sentiment edges for a polished look. Adhere sentiment together using foam adhesive. Apply a few drops of Dries Clear Adhesive to adhere the vellum vine onto coordinating image, then use scissors to separate it. Adhere one along the top and one along the bottom of card as shown, trimming off the length as needed.

Place a small piece of cheesecloth approximately 5 1/2 x 4” in the center of card, fluff slightly so it’s not laying flat, then adhere sentiment on card using several thicknesses of foam adhesive for a 3D effect. Then adhere clematis blooms, as desired securing with hot glue. Cut each leaf in two at a slight angle, then curl around stylus tip before adhering onto card. Finally, apply Dries Clear Adhesive on flowers and sentiment as desired, sprinkle with Crystal glitter and tap off.

Other Products: White Cardstock, Hot Glue, Funnel Tray, Foam Adhesive, Scissors, Paper Trimmer, Die Cutting Machine

Instructions:

Make a card base from white card stock. Cut white paper measuring 7 “ x 10 “. Score at the 5” mark on the longer side and fold to make a horizontal card. Cut a piece of deep pink pattern paper from the paper collection, a little smaller than the card base and adhere on the card front using clear glue. Cut a second piece of white card stock measuring 6 1/2” x 4 1/2” and adhere a piece of light colored pattern paper, a little smaller than the second mat layer. Adhere the whole piece on the card front.

Cut two pieces of checkered background paper from the paper collection measuring 4” x 1”. Add a silver mat layer with an 1/8 inch border all around. Adhere one piece on the top left starting from the left margin and adhere the second piece on the card front on the right side statring from the right margin. Use foam tape to adhere as this adds dimension to the paper.

Stamp the rose flower image with white pigment ink onto vellum paper using the biggest flower stamp from the Classic Rose stamp set. Add white embossing powder and heat set with heat tool. Cut with the coordinating classic rose die. Mold the flowers using the 3D flower shaping mold. See the video to make the flowers. Layer two big and one medium flower and adhere together with clear glue. Add prills in the center.

Stamp the leaves using the Leafy Accents stamp onto Deluxe flower shaping paper with Library green ink. Color with Leaf Green Archival ink and cut with matching die. Shape the leaves in the 3D shaping mold.   Make small filler flowers using the smallest stamps from the classic rose set. Add stamens in the centre.

Using the Simply Elegant Centerpiece die, cut from white cardstock  Cut in half and add one piece on the top strip and one piece on the bottom strip of paper.

Arrange the flowers and leaves on the card using hot glue.

Stamp a sentiment  from Celebrate Love sentiment set and add to the card.

Add pearls on the die cuts to finish the card.

Other Products: White card stock, hot glue gun, die cutting machine, water mister, Victorian velvet distress oxide ink pad

Instructions:

Card size: 5 x 7”. Make a shaped card by placing the outer die of the Fancy Oval Frames off the fold at the top of a 5 x 7 card. Cut another front from white then glue it to the card base matching bottom and sides.

Glue together the plaid and a piece of floral decorative paper to make 5” x 7” then die cut it using the outer die. Make a strip about 1/4” wide to cover the 2 papers meeting from pink cardstock then make a strip of white about 3/16” to go on top of the pink. Use the outer die with the next die in the set to create a border out of pink cardstock. Glue the decorative paper onto card front followed by the strips of pink and white then lastly the pink border. Adhere pearls to the narrow strip.

Cut the center oval and decorative oval from white, the oval again from pink and foam sheet. Glue the pink under the white oval and the decorative oval on top. Glue the foam sheet to the bottom then glue to the center of card front. Either remove pearls from directly underneath or make a channel for the pearls in your foam.

Stamp, die cut and color the Elegant Rose Banner heart then stamp the Happy Anniversary in the center of the banner. Cut a foam sheet for the heart, glue them together then glue to the white oval.

Stamp roses using Magenta Hue, sponge with Pink Peony, die cut then shape in the shaping mold. Stamp leaves using Fern Green, sponge with Leaf Green, die cut then shape in the mold. Use the Deluxe Flower Shaping Kit to finish roses and layer them (see video). Glitter the flowers with Crystal Clear and lacquer the leaves.

Arrange roses and leaves around right side of rose banner. Glitter the card front using Ultrafine. Add a pink ribbon under flower arrangement. Add single pearls around the pink border.

Other Products: Pink cardstock, white cardstock, pearls, foam sheet, ribbon, colored pencils in greens and pinks

Instructions:

Fold a piece of white card stock to 5 x 7", place the largest die from the Fancy Classic Oval Frame set on top and run through the die cut machine leaving 1/4" hanging over so as to not cut into the fold. This makes the shaped card. Next cut onother one and lay over the folded one. Using Gold card sotck and the 2nd die from the set, cut out and adhere to the top of the card. With another piece of Gold, cut the 3rd die out and adhere on top. Last, die cut the center out and add to the card.

Stamp the Wild Roses on white card stock with the Plum ink, color the centers with Vivid Chartreuse, color edges with Rose Madder. Cut out with the coordinating die, place in the matching mold and run through the die cut machine to shape. Add Stamens and put 2 together to make a flower.

Stamp the leaves wtih Bamboo Leaves, color with the Leaf Green, cut out with the coordinating die, ink the edges with Bamboo Leaves, place in the matching mold and run throught he die cut machine to shape.

Adhere the leaves and flowers on the card as shown.

To finish, add glitter to all the flowers and leaves.

Other Products: Paper trimmer, Die cut machine, Hot glue gun

Instructions:

Card size: 4 3/4" x 6 3/4". Cut 1 piece of white heavy weight cardstock 6 3/4" x 7 1/2", cut another piece 6 3/4" X 4”. Die cut the 6 3/4 X 4” piece on one end with edge die, point side out. Cut the other piece of cardstock on one end with the edge die, point side in. Score and fold the 6 3/4 x 4” piece and glue onto the other die cut piece (glue straight edges together) so that 2 halves meet and interlock (should be about a 1/2" tab on straight side).

Use medium pink decorative paper to cut both halves with decorative die plus edge die (both halves) and also cut a piece of the decorative paper for the card inside center at 4 3/8” x 6 1/2". Cut a piece of gold for the inside at 4 5/8” x 6 5/8”, 2 pieces for the outside 3 1/2" x 6 5/8”. Die cut the 2 smaller pieces with the decorative dies plus edge die. Glue the pink onto the gold for inside and for outside, outside decorative die cut pieces will be off set just slightly so that halves still semi-interlock. Glue center stack to inside of card and glue outside decorative pieces to the 2 matching outside card base fronts. Use the 2 halves of the decorative die (without edge die) to cut a piece of white cardstock for the inside at 4 1/4" x 6 3/8”. Place the lattice looking bar at the “top” of inside.

Stamp the Elegant Rose Banner and the bird from the Cascading Petals collection using London Fog (if coloring with alcohol markers) if using water-based brushes or markers use other light-colored ink best suited for that. Die cut then color. For the Rose Banner, separately stamp sentiment using Magenta Hue then die cut with separate die piece (included with Rose Banner die). Also cut a piece of foam to go under the sentiment, glue together all pieces then glue to the center inside of card.

For the outside: Stamp smallest Wild Rose trio several times using Magenta Hue on Deluxe Flower Shaping Cardstock, die cut, sponge edges and backs only, place in Shaping Mold then finish shaping with the Deluxe flower Shaping Kit, insert gold stamen then glitter flowers with Crystal Clear.

Stamp leaves using Fern Green, sponge with Leaf Green, die cut then shape in mold. Cut leaves into leaf groups of 1 or 2.

Decorate the front: Round the back of the bird a bit with the largest stylist tool from the Deluxe Flower Shaping Kit, add dimensional to keep it popped up about 1/4" or so. Glue flowers and leaves of bird image top right. Add 5 roses to image then glue 2 more flowers with Leaves to the bottom right.

Glitter the bird and inside of card.

Other Products: White cardstock, London Fog Memento Ink, Copic Markers: YG03, YG25, YG17, YG63, RV10, RV02, RV55, Y21, YR24, YR27, B21, B32, B24, BV31, E50, E21, E33, E35, E37. Black fine point marker.

Instructions:

Fold white cardstock to 6 x 5.5" with fold on the top, then use the outline die from the Fancy Classic Oval Frame Die to cut, leaving the top of the die over-hanging fold by about 1". Use the same die and cut out the full front from the Floral Banners Paper Collection. Cut out 3 white doilies from the same die set as pictured. Cut out two ovals with the oval dies from the Floral Banners Paper Collection. Use dimensional adhesive and glue all of them. Stamp the sentiment in Fern Green ink using the Celebrate Love Sentiments stamp and cut it out.

Stamp blossoms from Large Wild Rose Cling Stamp Set in Magenta Hue ink onto Deluxe Flower Shaping paper, color the center and edges in the same colour. Then diecut with coordinating die and shape with coordinating mold. Stamp blossoms from Clematis Cling Stamp Set in Vibrant Fuchsia ink onto Deluxe Flower Shaping paper, color them with Vibrant Fuchsia and Rose Bud inks and diecut with coordinating dies. Add stamens and some glitter to all flowers. Stamp flowers from Lush Lilac Cling Stamp Set in Buttercup and Leaf Green inks onto Deluxe Flower Shaping paper and diecut with coordinating dies. Shape them with Delux Flower Shaping Kit tools. Put some prills in the center of the flowers. Stamp 2 branches from Leafy Accents Cling Stamp Set in Leaf Green ink, color them, cut out with coordinating die and shape with coordinating mold. Stamp 6 branches from the Cottage Tree 'scapes Cling Stamp Set in Leaf Green ink, color them with the same ink and diecut with coordinating die.

Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, sissal

Instructions:

Fold white cardstock to 5 x 7" with fold on the top then use the outline die from the Simply Classic Rectangle Frame Die to cut, leaving the top of the die over-hanging fold by about 1". Use the same die and cut out the diecut from the Floral Banners Paper Collection. Cut out 3 white doilies from the same die set. Cut out two rectangles from the Floral Banners Paper Collection. Use dimensional adhesive and glue all of them. Stamp the sentiment in Fern Green ink using the Celebrate Love Sentiments stamp and cut it out.

Stamp blossoms from Large Wild Rose Cling Stamp Set in Magenta Hue ink onto Deluxe Flower Shaping paper, color the center and edges in the same colour. Then diecut with coordinating die and shape with coordinating mold. Stamp blossoms from Clematis Cling Stamp Set in Vibrant Fuchsia ink onto Deluxe Flower Shaping paper, color them with Vibrant Fuchsia and Rose Bud inks and diecut with coordinating dies. Add stamens and some glitter to all flowers. Stamp flowers from Lush Lilac Cling Stamp Set in Buttercup and Leaf Green inks onto Deluxe Flower Shaping paper and diecut with coordinating die. Shape them with Deluxe Flower Shaping Kit tools. Put some prills in the center of the flowers. Stamp 1 branch from Leafy Accents Cling Stamp Set in Leaf Green ink, color them, cut out with coordinating die and shape with coordinating mold. Stamp 8 branches from the Holly Berry Spray Cling Stamp Set in Leaf Green ink and diecut with coordinating die.

Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, sissal

Instructions:

Other Products: Smooth White Cardstock, Violet Archival, Distress Bundle Sage, Satin Cord, Hot Glue

Instructions:

Other Products: Smooth White Cardstock, Satin Ribbon Twine, Violet Archival, Hot glue. Distress Bundle Sage ink,

Instructions:

Cut a piece of white cardstock 10” x 7”, score at 5” along the long side and fold to create a base card of 5” x 7”.  Die cut the shaped front on the left side using the middle cutting die from the HCD2-7403 Fancy Flourish Border Die set. 

Die cut the left decorative die from white cardstock using the left die and the edge die from the HCD2-7403 Fancy Flourish Border Die. Add Frosting Powder using spray adhesive and adhere white cardstock behind the decorative die. Trim to fit and then adhere to the left side of the card front.  Die cut the right decorative die from white cardstock using the right die and edge die from the HCD2-7403 Fancy Flourish Border Die set. Add Frosting Powder using spray adhesive and adhere a piece of white cardstock, trim to fit and adhere to the right inside of the card. Add pearls to the edges as shown.

Stamp the sentiment from the HCPC-3867 Celebrate Love Sentiments Cling Stamp set in Obisidian ink with a stamp positioner on the inside of the card.

Stamp the leaf images from the HCPC-3835 Leafy Accents Cling Stamp set in Northern Pine ink on Deluxe Flower Shaping Paper. Colour with Leaf Green ink and Magenta Hue inks and die cut with the coordinating die. Colour the backs of the leaves with Leaf Green ink and shape using the coordinating mold. Add Crystal Clear glitter using clear gloss gel medium, trim and add to the left front of the card and bottom right as shown.

Stamp the rose images from the HCPC-3752 Classic Rose Cling Stamp set in Plum and Magenta  Hue inks. Colour the images with Magenta Hue ink and the centres of the Magenta flowers with Magenta Hue ink and the Plum flowers with Plum ink and die cut with the coordinating dies. Colour the backs with Magenta Hue ink and the edges of the Magenta flowers with Magenta Hue ink and the Plum flowers with Plum ink. Shape using groove golf tools and assemble in a variety of sizes using hot glue.

Add Indian Gold Nuvo Mousse randomly to the Plum flowers and then add Crystal Clear glitter using clear gloss gel medium and adhere over the leaves as shown on the left side of the card and the bottom right of the card.

Other Products: Pearls, Altenew Obsidian Pigment ink, Stamp Positioner, Hot Glue Gun, Spray Adhesive

Instructions:

Card size 5”x7”. Take pattern paper from the HCDP1-2133 Floral Banners Paper Collection and adhere it using designer dries clear adhesive. Cut two dies from HCD1-7211 Decorative Pocket Accents Die on white cardstock, adhere it using foam tape, as shown.

Stamp one image from HCPC-3970 Peony & Sunflower Banner Cling Stamp Set on white cardstock using archival ink-jet black and cut them with coordinating die, add crystal clear glitter, cut them into half and adhere them using foam tape.

Stamp one more image from the same stamp set on white cardstock using archival ink-jet black and cut them  with coordinating die and color it with Zig Clean Color Real  Brush Markers using Color In Watercolor Brush- Fine, add sentiment from HCPC-3848 Cheerful Note Sentiments Cling Stamp Set using archival ink-cactus flower, adhere it using foam tape, as pictured.

Other Products: Big Shot Plus Machine, Foam Tape

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 10” x 7”, score at 5” along the long side and fold to create a base card 5” x 7”. Cut a piece of gold cardstock 5” x 7” and adhere to the front of the card. Cut a piece of white cardstock 4 7/8” x 6 7/8” and adhere to the front of the gold cardstock.

Die cut the outer frame using the No. 1 die from the HCD2-7381 Fancy Classic Oval Frame Die out of white cardstock and adhere to the front of the card.  Die cut the outer frame from white cardstock using the no. 1 and No. 3 dies and adhere to the base frame using foam tape.  Die cut two outer decorative frames using the No. 2 die from the HCD2-7381 Fancy Classic Oval Frame Die – one out of gold cardstock and one out of white cardstock. Adhere the gold decorative die to the white decorative die and adhere to the frame as shown.

Die cut three decorative frames out of white cardstock using the Nos. 3 and 4 dies from the HCD2-7381 Fancy Classic Oval Frame Die and adhere together. Add Frosting Powder using spray adhesive and then adhere inside the frame as shown.

Die cut the inner gold layer using the No. 4 die from the HCD2-7381 Fancy Classic Oval Frame Die set and adhere to the centre of the frame. Die cut the inner decorative die out of white cardstock using the Nos. 4 and 5 dies and adhere to the centre of the frame.

Stamp the rose frame images from the HCPC-3968 Elegant Rose Banner Cling Stamp Set in Jet Black ink on Iris cardstock. Colour the images with Zig Clean Colour Clean Real Brush Markers and colour pencils and die cut with the coordinating die. Trim the frame and adhere to the card front with foam tape as shown. Add clear Wink of Stella for some subtle sparkle.

Stamp the rose leaf images from the HCPC-3752 Classic Rose Cling Stamp set in Northern Pink ink on Deluxe Flower Shaping Paper. Colour the images with Garden Patina ink and die cut with the coordinating die. Shape using the coordinating mold and add Crystal Clear glitter with clear gloss gel medium. Trim and adhere around the left of the frame as shown.

To create the rose stamp the rose images from the HCPC-3752 Classic Rose Cling Stamp set in Magenta Hue ink on Deluxe Flower Shaping Paper. Colour the flowers with Angel Pink ink and Magenta Hue in the centres of the flowers and die cut with the coordinating dies. Colour the backs of the flowers with Angel Pink ink and the edges front and back with Magenta Hue ink. Shape the petals using golf tools and assemble with hot glue. Add Crystal Clear glitter using clear gloss gel medium and adhere over the leaves on the left side of the rose frames as shown.

Stamp the sentiment from the HCPC-3845 Just For You Sentiments Cling Stamp Set in embossing ink on white cardstock and heat emboss with gold embossing powder. Die cut using the small rectangle die from the HCD1-7203 Ornamental Tags Die. Die cut another plain rectangle from white cardstock and adhere the embossed sentiment on it. Trim and adhere to the centre of the card as shown.

To finish, add iridescent gems to the tag and on the decorative dies.

Other Products: Iris cardstock, Hero Arts Embossing and Watermark ink, clear gloss gel medium, hot glue gun, Prismacolour pencils, iridescent gems, Memento ink - Angel Pink, foam tape, Wink of Stella

Instructions:

Card size is 7 x 6 3/4”. Cut white cardstock 11 x 6 3/4” and score at 1/2” and 7 1/2”. Cut another white cardstock 3 1/2 x 6 3/4” and adhere to the large cardstock at the 1/2” score line creating a 14 1/2” base. Using the center edge Fancy Flourish Border Die, cut both ends with the center of the die facing out. Fold at the score lines and adhere magnets to both sides.

Cut Climbing Clematis designer paper 3 1/2 x 6 3/4” 2x from sheet 8B and 2x from sheet 12B, die cut the edges using the same die and adhere the lighter color to the front of the side panels and the darker purple to the inside of the side panels. Cut a 6 3/4 x 6 1/2” panel from sheet 8B and adhere to the inside center. Stamp the ‘Have a Wonderful Birthday’ sentiment from the Special Birthday Sentiments Cling Stamp Set on white cardstock using Majestic Violet ink and diecut using the Album Tags and Accents Die. Ink the edges and adhere to the center of the inside.

Using both decorative Fancy Flourish Border Dies along with the edge die, cut 2x each from white cardstock. Sponge with dries clear adhesive and cover with Rajni Chawla’s Crystal Clear glitter. When dry, adhere the matching diecuts to the front side panels over the designer paper. Adhere the other two to the top and bottom of the inside.

Using the eyelet tag from Album Tags and Accents Die, cut from white cardstock, sponge the edges with dries clear adhesive and sprinkle with crystal clear glitter. Cut the inside die from sheet 8B of the paper collection, ink the edges with Majestic Violet ink and adhere to the eyelet diecut. Using hot glue adhere this only to the left side of the center of the card front so that the card still opens.

Stamp the Clematis Flowers on Deluxe Flower Shaping Paper using Rose Madder ink, color using Pink Peony ink and diecut using the coordinating die. Shape in the Clematis Shaping Mold, pierce the centers using the Groove Golf Tool set, insert Bridal Bouquet Stamens and secure with hot glue.

Stamp the Hyacinth flowers on Deluxe Flower shaping Paper in Majestic Violet and Vivid Chartreuse, color with the same colors, diecut using the coordinating die, shape using the Hyacinth Shaping Mold and add a stamen to the center of each.

Stamp the leaves from the Large Floral Urn Cling Stamp set on Deluxe Flower shaping Paper using Olive ink, color using Vivid Chartreuse and Olive inks, diecut using the coordinating die and shape using the Deluxe flower Shaping Kit.

Adhere the flowers and leaves on the eyelet tag using hot glue to make a pretty arrangement. Use the Heat It tool to melt any glue strings that remain on the card.

Other Products: Diecutting Machine, White Cardstock, Hot Glue Gun, Misti, Funnel Tray

Instructions:

My finished card size is 5" x 7". Make card base and cover with a piece of dark purple cardstock. Using white cardstock, cut out the larger die from the set and glue it to the card front. Using a piece of sheet 8B of the paper collection cut a piece to fit inside the first die cut. Use Majestic Violet to edge the piece and adhere to the card front using dimensional tape. Using white cardstock cut the next smallest die using white cardstock and adhere to the card front. Cut a piece of light purple cardstock using the next smallest die in the set and adhere to the card front using dimensional tape. Then using white cardstock cut the smallest die and adhere it to the card front.

Stamp the flowers onto Deluxe Flower Shaping Paper using Lulu Lavender ink. Cut out using coordinating die. Use the Stack and Store Daubers to add more Lulu Lavender onto the edges. Lay onto the mold and spritz with water. Run through the die cut machine then turn out onto desk to dry. Stamp the leaves onto Deluxe Flower Shaping Paper using Fern Green ink. Color with Leaf Green i nk and cut out with coordinating dies. Edge the leaves with more Fern Green ink. Lay onto the mold, spritz with water and run through the die cut machine. Turn out onto the desk to dry.

Glue two flower petals together to make a flower and add Heart of Gold Prills to the center. Once the flowers and the leaves are dry, decide on placement and glue down. The card is finished.

Other Products: Hot Glue Gun, Die Cut Machine, Dimensional Tape, White Cardstock, Light Purple Cardstock, Dark Purple Cardstock, Misti Stamping Platform

Instructions:

Cut a white cardstock slimline card base (7 x 8.5" folded in half). Cut a piece of the light purple patterned paper that is 3.25 x 8.25", and a piece of the dark purple patterned paper that is 3 x 8". Adhere these 2 layers to the card, and add white photo corners to the dark purple patterned paper.

Die cut out 2 of the smaller Ornate Ovals dies from white cardstock. Add the Thank You sentiment to the small die cut piece using brown ink (Staz On- Timber Brown). Adhere to the card using foam squares.

Stamp and die cut 1 of the clematis spray using brown ink. Stamp and die cut 2 of the small and medium Clematis flowers using brown ink. Add color to all of the flowers using purple ink (Stampin Up- Elegant Eggplant) and a waterbrush. Add color to the spray leaves using green ink (Stampin Up- Old Olive) and a waterbrush.

Stamp and die cut 2 sets of the swirly Leafy Accents leaves using brown ink. Add color to these leaves using green ink and daubers. Shape the flowers and leaves using the coordinating 3D Shaping Molds. Shape the spray using the Deluxe Flower Shaping Kit. Assemble the flowers and add lavender Prills to the middle of the spray flowers and small flowers using a liquid adhesive. Add purple stamen to the middle of the larger flowers.

Add the spray above the sentiment, and add the flowers to either side of the sentiment. Then add leafy bits around the larger flowers.

Other Products: Stampin Up Ink (Old Olive, Elegant Eggplant), Waterbrush, Cardstock- White), Scrapbook Adhesives by 3L (Crafty Foam Tape, Dual Tip Glue Pen, Creative Photo Corners White, E-Z Runner Ultra, Adhesive Dots Small)

Instructions:

Spritz a sheet of stamping card with water and add cosmic shimmer shakers to create a lightly coloured background and allow to thoroughly dry, diecut using the 3 dies in the Fancy Flourish Border die set.

Use the centre die to create 2 green panels using the paper from the paper collection, trim to size and adhere the die cuts to the back of each panel. Sponge over dries clear adhesive, sprinkle with transparent crystal glitter and allow to dry.

Create a tent fold card base using white card 6.75” square. Cut a 6.75” x 5” panel of darker paper from the collection and adhere to the centre of the card base. Adhere the die cut panels to the top and bottom of the card as shown, using foam pads.

Die cut the 4th size eyelet diamond using dark paper from the collection and adhere to a slightly larger plain edge pale green diamond. Die cut a white diamond of the same size and adhere to the back of the green diamond to strengthen. Adhere this diamond to the top centre of the card base.

Stamp the sentiment onto the shimmer shaker card using black ink, diecut using a slightly smaller diamond and add to the centre of the eyelet diamond using foam pads.

Make the flowers: Stamp the hydrangea flowers using danube blue ink onto flower shaping paper, colour using summer sky and add a touch of sweet plum to the centre to tint the petals. Place into the mold, spritz with water and run through the die cutting machine to shape. Create a hole in the centre of each flower and secure 2 stamen into the centre using hot glue.

Die cut 2 border swirls using blue paper from the collection, snip into the swirls and create 2 small areas top and bottom of the diamond. Use dries clear adhesive to secure and hot glue the flowers into position on top of the swirls.

Sponge a little more dries clear adhesive onto the centre diamond and flowers, sprinkle with glitter and remove the excess.

Other Products: Stamping card, white card base 6.75" square, Heather meadow & denim dash shimmer shakers

Instructions:

Overall finished size 7 1/4 x 4”: Cut a piece of white cardstock 7 3/4 x 3 1/4” and score 1/4” on 3 sides, place the centre Fancy Flourish Border Die to the centre top of the cardstock, point facing downward and die-cut. Burnish the score lines and adhere the 3no. 1/4” strips together to create a pocket (snip off any overhanging tabs).

Cut white cardstock 7 1/4 x 3 3/4” and score 1/4” horizontal on one side. Lay the centre die with the point facing up and die-cut.

Cover top and bottom panels with Delightful Daffodil Collection 12B edge in Sky Blue and add decorative Fancy Flourish Border white die-cuts.

Adhere the top panel tab onto horizontal white cardstock 7 1/4 x 4” and cover with Delightful Daffodil Paper Collection 5B edged in Sky Blue. Cut the same paper to continue the pattern on the underside of the top panel.

Adhere the bottom (pocket) panel onto the front of the 5B piece.

For insert cut white cardstock Intricate Swirl Frame and mount onto white cardstock covered with Delightful Daffodil 12B. Stamp onto white cardstock in Sky Blue ‘For my Friend’ edge in Sky Blue and mat onto Intricate Swirl Frame adhere with Dries Clear.

Stamp onto Deluxe Flower Shaping Paper in Leaf Green Leafy Accents and colour with Vivid Chartreuse edge in Fern Green, die-cut and run through the die-cutting machine in 3D Leafy Accents Shaping Mold. Add Dries Clear and Crystal Clear.

Stamp onto Deluxe Flower Shaping Paper in Olive Classic Rose leaves, colour with Viridian, die-cut and run through the die-cutting machine in 3D Rose Shaping Mold.

Stamp onto Deluxe Flower Shaping Paper in Night Sky Classic and colour with distress oxide stormy sky front and back, edged in Night Sky. Run through die-cutting machine in 3D Rose Shaping Mold. Use Deluxe Flower Shaping Kit to cup 2 smaller petals to create a bud, then 3 larger petals around. Use a single petal for little flowers and add Nuvo Dandelion dots to the centres.

Stamp onto Art Foam Paper in Vivid Chartreuse Cottage Garden Hydrangea, add Nuvo Apple Green.

Stamp onto Delightful Daffodil Ornamental Tag in Night Sky ‘Lets Celebrate You’ and die-cut.

Adhere leaves, flowers and tag onto the top panel using hot glue, add a little cheese cloth under.

Other Products: Paper trimmer, scissors, hot glue, cheese cloth, distress oxide Stormy Sky

Instructions:

The finished card measures 7 x 5". Take a 9 x 7 white base and fold it at 5 to make a side fold card. Place die from die HCD2-7403 to cut the edge of the card. Use the die from the same kit on a piece of green paper from the Cottage Garden Collection.  Ink the edge with leaf green and glue it to the card front.

Cut in pattern paper a 6 3/4 x 4 3/4" rectangle, ink the edge in green and glue it on the base. 

Stamp your magnolias flowers with Archival leaf green ink onto white flower shaping paper, color the center and shade the edge with the same color. Diecut with the coordinate die. Place facedown into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe flower shaping kit tools. Use 2 petals by flower. Poke a hole in the center and add stamens. Made 2 big, 3 medium and 1 little.  

Stamp your hydrangeas flowers with Archival leaf green ink onto blue paper. Diecut with the coordinating die. Place facedown into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe flower shaping kit tools. Use 2 petals for each flower. Poke a hole in the center and add stamens. Make 7 flowers.

Stamp with leaf green and die cut leaves from the Floral shoppe collection.

Make an arrangement on the left of your card with cheesecloth, sewing thread and ribbon and glue your flowers and leaves over it. 

For the final touch, die cut a sentiment in the paper with die from Ornemental Tags, add a bow and glue it on your base with 3D foam. Add a little flower next to it. Use it to keep your card closed.

Other Products: diecutting machine, watermister, scissors, hot glue gun, ribbon, sewing thread, cheesecloth

Instructions:

Card size is 5 x 7”. Cut and fold 7 1/2 x 11” Champagne Cream Metallic Cardstock at 5 1/2”. Place largest Simply Classic Rectangle Frame Die a little over the fold and diecut to create shaped card base. Using the same die, cut again from Champagne Cream Metallic Cardstock and adhere to card base. Using the next size die, cut from Luxe Gold cardstock and adhere to the card front using dries clear adhesive. Cut the third largest die from Luxe Gold and adhere using Luxe Gold cardstock and adhere. Use the inside diecut and adhere to card front using dimensional squares. Cut the next size from Champagne Cream Metallic, stamp the sentiment ‘Hope your day is amazing!’ from Elaborate Birthday Cling Stamp set using VersaMark, cover with Ranger Gold Embossing Powder and heat set using the Heat It Tool and adhere.

Use the gold inside piece from the second diecut and adhere to the inside of card. Using the third largest die, cut from cream cardstock. Stamp the sentiment ‘Happy Anniversary’ from the Celebrate Love Sentiments set on the inside piece using VersaMark, cover with gold embossing powder and heat set using Heat It Tool. Adhere both to the inside of card as shown.

Stamp the Small Wild Rose on champagne metallic cardstock using VersaMark, cover with Aged Ivory embossing powder and heat set using the Heat It Tool. Diecut using the coordinating dies. Color front and back using Seafarer ink. Shape stamped side down in the 3D Small Wild Rose Mold. Layer three together, slightly offset. Pierce the centers using the Groove Golf Tool and insert 10 Assorted Bead Stamens - Medium. Secure using hot glue.

Stamp the leaves from the Large Floral Urn Cling Stamp Set on Deluxe Flower Shaping Paper using Archival Olive ink. Color using Vivid Chartreuse and Olive inks. Diecut using the coordinating die and shape using the Deluxe Flower Shaping kit.

Sponge the flower and leaves with dries clear adhesive and sprinkle with Rajni Chawla’s Crystal Clear glitter. Adhere as shown.

Other Products: Champagne Metallic Cream Cardstock, VersaMark, Misti, Funnel Tray

Instructions:

The finished card measures 5 x 6 3/4". Take a 13 x 5" white base and fold it in half to make a top fold card. Place die from die HCD2-7382 about 1/2" up past fold so that fold does not get cut.  Fold in half the front part of the card to make an easel card. Use the same die again on a piece of paper #8A from the Floral Banner Collection. Ink the edge with Viridian ink and glue the half bottom part to the folded card matching bottom and side edges. Cut the decorative part of two outside dies out of Gold Luxe. Glue it to the card front.

Cut pink paper #6A an oval with the die. Ink the edge with Coastal coral ink, add gold shimmer with the Nuvo pen and glue it with 3D foam on the base. Cut the word FOR YOU with the die Letters and Numbers in a pattern paper. Glue it in the middle of the card and add 3D Crystal Lacquer on it to give dimension.

Stamp your Climbing Clematis flowers with Coastal Coral and Viridian ink onto white flower shaping paper, color the centre and shade the edge with the same color. You can also color the back of the flowers. Diecut with the coordinate die. Place facedown into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe flower shaping kit tools. Glue 2 layers together. In the center of the flowers make a hole and stamens. Made 1 big Coastal Coral flower and 2 little viridian.  Add gold shimmer with the nuvo pen on the edge of the flowers.

Stamp fill in elements from Wild Aster and Holly Berry Spray stamp with Olive ink.  Die cut with the coordinating dies and color it with stampin’ write melon sorbet marker. Make an arrangement on the left of your card and glue your flowers over it. 

To make an easel card, die cut one die from the same kit in gold paper and glue it inside the card.  Make a little bouquet to the left of the die with fill in elements and one viridian clematis flower.  

Other Products: Diecutting machine, watermister, scissors, hot glue gun, ribbon, stampin’write melon sorbet, nuvo pen aqua shimmer,

Instructions:

Create a 5 x 7" card base with white cardstock. Cut a 4.75 x 6.75" piece of light blue designer paper from the Floral Banners Paper Collection, distress with Garden Patina and adhere to card front.

Cut a 5.75 x 4.25" piece of peach designer paper, distress with Coastal Coral. Cut a slightly larger mat from white cardstock and adhere together, adhere to center of card front with adhesive backed foam. Cut the largest die in the Palace Gateway Die in vellum and adhere, cut the gate die in white cardstock and adhere.

Stamp the peony banner from the Peony & Sunflower Banner Cling Stamp Set in Jet Black on Bristol Smooth Cardstock, color with Zig markers and cut out with coordinating dies. Stamp the sentiment from the For My Friend Sentiments Cling Stamp Set in Jet Black on the center die. Adhere with foam tape on top of gate, as shown.

Stamp the bird from the Floral Song Stamp Set in Jet Black on white cardstock, cut out with coordinating dies and sponge with Coastal Coral and Garden Patina, use Zig markers for branch and beak. Sculpt with stylus for dimension.

Stamp the Large and Small Sweet Peony Cling Stamp Set in Rose Madder, cut out with coordinating dies and sponge with same, sculpt with the 3D Floral Basics Shaping Mold and add stamens and glitter.

Stamp the leaves from the Leafy Accents Cling Stamp Set in Olive, sponge with Rose Madder and Olive and cut out with coordinating dies, sculpt with the 3D Leafy Accents Shaping Mold.

Arrange and adhere flowers, leaves and bird, as pictured.

Other Products: White cardstock, adhesive backed foam, Bristol Smooth Cardstock

Instructions:

Cut out the white base of the card and fold it to 7 1/2" x 5 1/2". From the paper collection, cut a 7 1/4” x 5 1/4" rectangle and glue to the base. From white paper, cut a rectangle with dimensions of 7" x 5" from the collection of paper, cut a rectangle measuring 6 3/4" x 4 3/4", adhere it on the white rectangle and adhere together to the base with Double Dots 100pc. -3D Foam Circle.

From the white paper and the paper collection, cut the Fancy Flourish Border Die.

From the Royal Elegance Frames Die zetaw, cut the medium white paper frame, then cut the smaller oval frame from the paper collection stamp sentiment with black ink and glue it as shown.

Using green ink, stamp the Christmas Trees from the Holiday Village Cling Stamp Set and cut with the coordinating die.

Glue everything as pictured, add a ribbon and a pearl.

Other Products: Ribbon, Big-Shot Machine, pearl

Instructions:

Cut out the black base of the card and fold it to 7 1/2" x 5 1/2". From the paper collection, cut a 7 1/4” x 5 1/4" rectangle and glue to the base. From black paper, cut a rectangle with dimensions of 7" x 5" and adhere with Double Dots 100pc. -3D Foam Circle.

From the silver paper, black paper and the paper collection, cut Fancy Flourish Border Die, Elegant Hearts Centerpiece Die and Simply Elegant Centerpiece Die and Swirly Accent Spray Die and adhere as shown.

Glue everything as in the photos, add a ribbon and a pearl.

Other Products: Ribbon, pearl, Big-Shot Machine

Instructions:

The ready card base measures 7 1/2" by 7 1/2". To prepare the card base, cut 2 panels from smooth white cardstock, one measuring 7 1/2" by 7 1/2" and the other measuring 8" by 7 1/2". Score the second panel at 1/2" on the 8 " side and crease well. Glue the first panel on the scored hinge and press well.

Choose the paper from the designer paper collection and cut 7" by 7" panel. Mat it on Luxe gold cardstock, making a delicate border of 1/16" on all the sides. Layer the panel on the ready card base.

Next, Cut 2 white die cuts from Fancy Flourish Border Die and 2 solid covers using the same die from Luxe Gold Cardstock. Mat white die-cut on the gold base and finally layer it on the ready card front as shown. Next, Cut the circle from teal color cardstock using Eyelet Circle Die and layer it in the center of the card front as shown.

For Sunflowers, stamp multiple images of flower petals using Sunflower Archival ink and cut these using its coordinating dies. Paint the flower petals using Sunflower ink and Orange Tangelo Archival inks and shape them using a Deluxe flower shaping kit. Prepare 2 large and 4 medium-sized flowers. Prick the holes in the center and secure the pollens with a heat tool. Stamp one size smaller petal from the same set using Library green/ Cobalt Blue archival ink on green color cardstock and cut them using coordinating dies. Using the crushing technique, create calyx and complete the flower by securing them behind each flower for the complete flower look.

Stamp 3-4 sets of leaves using Leafy Accent stamp and Olive Green Archival ink and cut them using its coordinating die. Color the leaves using the same inks and shape them using a deluxe flower shaping kit.

Stamp, color and cut few wisteria flowers using Leaf Green Archival ink and shape them using a flower shaping kit. Add flower pollens using a glossy accent and use these flowers as fillers.

Once all the elements are ready, assemble the card as shown and complete the card by adding a sentiment from Special Birthday Sentiments Cling Stamp Set and finally glitter the flowers using Rajni Chawla's Crystal Clear Powder. 

Other Products: Other Supplies Used: Smooth white cardstock, Die Cutting machine, Score Board, Glossy Accent, Sharp pair of Scissors

Instructions:

The ready card base measures 7" by 8". To prepare the card base, cut 2 panels from smooth white cardstock, one measuring 7" by 8" and the other measuring 7" by 8 1/2". Score the second panel at 1/2" on 8 1/2 " side and crease well. Glue the first panel on the scored hinge and press well.

Choose the paper from the designer paper collection and cut 6" by 7"  panel. Mat it on Luxe gold cardstock, making a delicate border of 1/16" on all the sides. Choose another coordinating paper and mat the panel on it, creating another delicate border of 1/16th of an inch on all sides. Next layer the panel on the ready card base.

Next, Cut 2 white die cuts from Fancy Flourish Border Die and 2 from Luxe Gold Cardstock. Mat white die-cut on the gold offsetting a little, creating a golden shadow. Layer the die cuts face to face as shown, using tiny glue dots.

For Sunflowers, stamp multiple images of flower petals using Sunflower Archival ink and cut these using its coordinating dies. Paint the flower petals using Sunflower ink and Orange Tangelo Archival inks and shape them using a Deluxe flower shaping kit. Prepare 2 large and 4 medium-sized flowers. Prick the holes in the center and secure the pollens with a heat tool. Stamp one size smaller petal from the same set using Library green/ Cobalt Blue archival ink on green color cardstock and cut them using coordinating dies. Using the crushing technique, create calyx and complete the flower by securing them behind each flower for the complete flower look.

Stamp 3-4 sets of leaves using Leafy Accent stamp and Olive Green Archival ink and cut them using its coordinating die. Color the leaves using the same inks and shape them using a deluxe flower shaping kit.

Stamp, color and cut few wisteria flowers using Leaf Green Archival ink and shape them using a flower shaping kit. Add flower pollens using a glossy accent and use these flowers as fillers.

Once, all the elements are ready, assemble the card as shown and complete the card by adding a sentiment from Special Birthday Sentiments Cling Stamp Set.

Other Products: Other Supplies Used: Smooth white cardstock, Die Cutting machine, Score Board, Glossy Accent, Sharp pair of Scissors

Instructions:

The ready top fold see-through card measures 8″ by 6″. To prepare the white card base, cut one piece measuring 11 1/2″ by 6″ and score at 3 1/2″ on the 11 1/2" side. Crease well with a bone folder. Take the middle edge cutting die and secure it using blue painter's tape on the edge of the shorter panel. Run it through the die-cutting machine to get the decorative edge on the panel.

Next, cut a piece of acetate sheet measuring 8' by 6' and adhere from the inside of the shorter panel, using tacky glue. Chop the extra acetate edge if hanging out. Choose the paper from the designer paper collection and cover the top and the inside panels of the card.

Cut the decorative die cut from the Luxe Gold cardstock using Fancy Flourish Border Die. Glue an extra white die-cut to add strength (optional). Layer it on the shorter panel as shown.

For Sunflowers, stamp multiple images of flower petals using Sunflower Archival ink and cut these using its coordinating dies. Paint the flower petals using Sunflower ink and Orange Tangelo Archival inks and shape them using a Deluxe flower shaping kit. Prepare 2 large and 4 medium-sized flowers. Prick the holes in the center and secure the pollens with a heat tool. Stamp one size smaller petal from the same set using Library green/ Cobalt Blue archival ink on green color cardstock and cut them using coordinating dies. Using the crushing technique, create calyx and complete the flower by securing them behind each flower for the complete flower look.

Stamp 3-4 sets of leaves using Leafy Accent stamp and Olive Green Archival ink and cut them using its coordinating die. Color the leaves using the same inks and shape them using a deluxe flower shaping kit.

Stamp, color and cut a few wisteria flowers using Leaf Green Archival ink and shape them using a flower shaping kit. Add flower pollens using a glossy accent and use these flowers as fillers.

Once, all the elements are ready, assemble the card as shown and complete the card by adding a sentiment from Celebrate Love Sentiments Cling Stamp Set and add glitter using Rajni Chawla's Crystal Clear powder.

Other Products: Smooth white cardstock, Die Cutting machine, Score Board, Glossy Accent, Sharp pair of Scissors, Acetate Sheet

To make the triple easel card base in green cardstock, use the Simple Center Piece die set. For the large octagon shaped easel card use the largest die from the die set. Fold a piece of 6” x 12” cardstock in half, die cut shaped card with die making sure not to cut over the top fold line. Crease and fold only front side of octagon shaped card in half. Die cut another single piece with same die and glue to lower side of card front to form the easel card. Repeat same instructions for the middle easel card using die number 3 from largest and die number 6 for the smallest easel card.

Cover card fronts and also inside of cards with Rustic Sunflower paper collection using octagon dies to cut the pieces. Die cut both decorative pieces using Elegant Hearts Centerpiece die set from blue cardstock. Adhere large decorative piece to largest easel card front and smaller decorative piece to the middle easel card front. Adhere all 3 octagon shaped easel cards together using glue or tape, about 2 inches apart from each other.

Stamp multiple sunflowers and leaves with Rustic Sunflower stamp set, die cut with matching dies. Color sunflowers using archival inks in yellow and orange shades and green archival ink for the leaves using daubers. Shape flowers with matching shaping mold. Using a brush, cover flowers and leaves with Crystal lacquer and then sprinkle with Frosting Powder. Embellish center of sunflowers with glass glitter using hot glue. Adhere sunflowers and leaves to all 3 card fronts using hot glue.

Die cut tags from paper collection using Album Tags and Accents die set for the larger tag and Ticket and Tags die set for the small tag. Stamp sentiment on both tags using Celebrate Love Sentiments stamp set using black ink. Adhere tags to smallest easel card front and inside using foam tape.

Other Products: Die Cutting machine, hot glue gun, hot glue, paper trimmer, Ranger Archival Ink Pad in Orange Blossom, green cardstock, blue cardstock, Stampendous bronze crushed glass glitter, foam tape.

Instructions:

Card size 4” x 8” (final size). Take pattern paper from HCDP1-2131 Rustic Sunflower Paper Collection and adhere it on cards base.

Cut one base die from HCD2-7403 Fancy Flourish Border Die on luxe gold cardstock and cut one intricate die on white cardstock and adhere using foam tape.

Stamp Sunflower and leaf images from HCPC-3962 Rustic Sunflower Cling Stamp Set on Deluxe Flower Shaping Paper using archival ink-Tiger Lily and library green for leaves and cut them with coordinating HCD1-7364 Rustic Sunflower Die. Color them using archival ink-sunflower and tiger lily for flowers and leaf green for leaves, Shape them using HCFB1-5009 3D Rustic Sunflower Shaping Mold. Add prills and redland elements at the centre, then sprinkle crystal clear glitter.

Arrange sunflower and leaves as pictured.

Other Products: Big Shot Plus Machine

Instructions:

Prepare the base that is 5.75" x 4" folded. Use white cardstock. From the 1B Home on the Farm sheet, cut a strip measuring 1.25" x 5.75" and glue on the left side of the base. Cut a 2.5" x 5.75" strip from the white cardstock and glue on the right side of the base as shown.

From the 12B Home on the Farm sheet, cut out a circle using the Circle Basic Large Set HCD1-7155. Use the second largest circle. From the white cardstock, cut out a smaller circle, next in sequence, and 5 and 6 in sequence, starting from the largest. Glue together and place in the center of the base as shown.

Using  Jet Black ink, stamp the sunflower image from the HCPC-3970 Peony & Sunflower Banner Cling Stamp Set onto the printer paper. Cut with the coordinating die. Paint with felt-tip pens or markers using shades of yellow, orange, brown and green. Glue on circles. Apply a small amount of glue to the center of the sunflower image only.

Stamp the sentiment from the Special Birthday Sentiments HCPC-3843 set using Vivid Chartreuse color. Trim to the right size. Place on the 3D foam circles as shown.
On a white cardstock, stamp hearts from the HCPC-3965 Summer Wreath Accents Cling Stamp Set using the Jet Black color. Cut with the matching die. Color with felt-tip pens or markers in a shade of red. Glue in the designated place.

Finish the work with the white Nuvo droplets at the bottom and the gold droplets in the middle of the sunflower as shown.

Simple, slightly spacious work in warm, autumn colors is ready. Give it to a loved one or friends.

Other Products: Cutting machine, trimmer paper, felt-tip pens or markers, printer paper

Instructions:

Use the Deluxe Flower Shaping Paper- pack of 50 to prepare the folded 7" x 5" card base. From the yellow 10B Countryside Cottage Paper Collection, cut a 6.75" x 4.75" rectangle and glue it to the base.

From the white printing paper, cut a decorative frame from the HCD2-7403 Fancy Flourish Border Die Set. Glue on a yellow background. From the gold cardstock, cut a strip approximately 6.75" x 0.75" in size. Glue through the center.

From the gold and patterned 2B Home on the Farm Paper Collection, cut out the center of the decorative frame from the Royal Elegance Frames Die HCD2-7307. Join them together with a slight shift as shown. Glue in the central part.

Stamp the sunflower from the HCPC-3970 Peony & Sunflower Banner Cling Stamp Set on the white cardstock using the Jet Black color. Cut with the coordinating die. Paint with watercolor paints using shades of yellow, orange, brown and green for sunflower and shades of yellow, pink, beige and pale blue for butterfly and bee.

Stamp the sentiment from the Special Birthday Sentiments Cling Stamp Set HCPC-3843 on the white cardstock using the green color - Vivid Chatreuse. Cut the sentiment with a banner from the Arrows and Banner Die HCD1-7204 set. Fold as shown. Back with recycled cardboard and place in the center of the sunflower.

Using the glue and a fragment of the 3D foam strip, place the butterfly and bee in the designated place. And it's ready!

Other Products: cutting machine, paper trimmer, recycled cardboard, watercolor paints, brush, printing paper

Instructions:

Mat and layer Snowy Pines Paper Collection sheet 5B onto green shimmer cardstock onto the front of a 7 3/4 x 7 3/4” card base. Line the inside of the card with Festive Poinsettia edged in Red Geranium. Adhere a Festive Poinsettia topper sentiment onto die-cut Eyelet Rectangle & Basics Die red Festive Poinsettia, mount with dots.

Cut 2 panels of cream shimmer cardstock 2 3/8 x 6 7/8” and stamp in Fern Green random Snowy Pines Cabin, mount onto green shimmer cardstock 2 1/2 x 7”.
Stamp onto cream shimmer cardstock Snowy Pines Cabin x 2 and die-cut the wreath, adhere on dots over the full image.

Die-cut Ornate Oval in green shimmer cardstock and mount the topper using dots.
Cut strips of green shimmer cardstock at 1/8” widths adhere together using dries clear to create a diamond pattern. Use the gridlines of a glass mat to ensure equal spacing. Adhere to the back of the panels to create a panel on the front of the card measuring 7 x 7”, adhere the whole piece onto the front of the card using dots.

Add the Snowy Pines Topper on dots and add self-adhesive pearls on the diamond panel.

Stamp onto Deluxe Flower Shaping Paper Large Festive Poinsettia in Red Geranium and colour with Carnation Red front and back. Stamp the Festive Poinsettia leaves in Olive and colour with Veridian, colour the front and back and edge in Olive adding some shading to the centres. Die-cut and place in the 3D Large Festive Poinsettia Mold, spritz with water and run through the die-cutting machine. Cup the centres with the Deluxe Flower Shaping Kit. Hot glue 2 petals together, add a dot of hot glue to the centre and add Ribbit prills.

Stamp onto white cardstock in Olive leaves from Holly Berry Spray, die-cut and shape with Deluxe Flower Shaping Kit.

Add dries clear and crystal clear to the poinsettia and leaves and hot glue the flowers and leaves around the Snowy Pines Cabin topper.

Other Products: Paper trimmer, scissors, self adhesive pearls, hot glue, cream/green cardstock from stash