Instructions:

Ready side fold card measures 4" × 9". Cut a folded shaped card from white cardstock using shaped die from Slim Gateway Rectangle die set. Cut a mat from designer paper and white cardstock using same die. Glue both mats on cand base. Cut a decorative gate from white cardstock using gate die from the same set. Glue it on card using foam strips. 

Stamp Classic Rose flowers on deluxe flower shaping paper using pink peony ink and cut with coordinating die. Paint flowers using pink peony and leaf green ink. Shape flowers using ball tool. Stamp flowers from Sweet Pea set using sea grass ink and cut with coordinating die. Paint flowers using same ink and shape using stylus. Stamp leaves from Classic Rose, Holly Berry Spray and Wild Aster Spray stamp using fern green ink and cut with coordinating dies. Paint leaves using leaf green and fern green ink. Shape classic rose leaves using shaping mold. Arrange all elements on card and adhere them using hot glue.

Cut a sentiment strip from designer paper, glue it on white cardstock strip. Glue it on card using foam dots. For finished look, apply glitter on flowers and leaves using Art Glitter Clear Dries adhesive. 

Other Products: Smooth White Cardstock, Sea Grass Archival

Instructions:

Card size is 6 1/8” x 4”. Cut white cardstock to 6 1/8 x 8”, score at 4”. Place largest plain edge oval from the Eyelet Oval & Basic Large die set onto card front, place cutting plate only on along the edge of oval, creating a partial cut when passed through diecutting machine. Use paper trimmer to cut remaining edge of card front leaving you with a partial shaped oval card front. Use same die to diecut pink paper from Feathery Florals paper collection and adhere on oval card front using foam adhesive. Cut green panel from paper collection to 3 13/16 x 5 15/16”, ink edges with Leaf Green ink and adhere inside of card base.

Use paper trimmer to cut a strip of pink paper for top of card base, slightly smaller than the exposed surface, adhere with foam adhesive. Cut another white strip slightly smaller for layering, and finally a layer of vellum, layer and adhere together on card base. Diecut 5 small decorative ovals from HCD2-7246 Oval Filigree Frame Die Set Layer together for thickness. Use Hydra sponge to dab Dries Clear glue onto frame, sprinkle with Rajni Chawla’s Crystal Clear glitter. Apply glue onto lower portion of oval and adhere onto card base. Stamp medium feather using gold ink and gold embossing powder, heat set. Stamp another one using Forget Me Not and Majestic Violet ink. Stamp the smaller Feathery Florals image using Olive and Leaf Green on the foliage and Magenta Hue and Rose Madder on the florals. Diecut images with coordinating dies.

Use stack and Store daubers to color medium gold feather using Sunflower and Magenta Hue ink. Color floral image with Vivid Chartreuse, Rose Madder and Sunflower inks. Use Hydra sponge to apply Crystal Lacquer onto image for a soft sheen and allow to dry. Shape image using Deluxe Flower Shaping Kit, cut apart as desired and adhere onto card base as shown using foam adhesive.

Stamp sentiment onto white cardstock using Magenta Hue and Majestic Violet ink, use scissors to trim apart and adhere onto card base as shown. Use Dries Clear glue to apply Baby’s Breath onto card as desired and allow to dry.

Other Products: White Cardstock, Foam adhesive, paper trimmer, scissors, Tidy Tray

Instructions:

Create a top fold card measuring 5 1/2”x 7 1/2”.  Choose a designer paper from Climbing Clematis Paper Collection and cut it to the size 5 1/4”x 7 1/4”. Adhere it on white card base. Cut a decorative gate in pink card stock and Luxe Gold Cardstock using Lattice Swirl Gateway Die. Glue a golden die-cut, behind the pink one to create little shadows. Choose a designer paper from the same paper collection and cut a background by using the solid die from same die set. Adhere all die cuts to the card as shown.

For clematis stamp the small flower images from the Clematis Cling Stamp Set in Majestic Violet Archival ink on Deluxe Flower Shaping Paper. Colour the flowers with Magenta Hue Archival ink and Cactus flower Archival ink using the Stack and store daubers. Die cut all the flower images with the coordinating dies and shape them using coordinating mold. Add “heart of gold” prills to the centre of flowers. For leaves, stamp the leaves from Leafy Accents stamp set on Deluxe Flower Shaping paper with Fern Green Archival ink and color them using Leaf Green Archival ink and Vivid Chartreuse Archival ink. Cut the leaves using their coordinating dies and shape them using coordinating 3D shaping mold.

Stamp the Trellis and the birds images from the Clematis Birdhouse & Trellis Cling Stamp Set in Jet Black ink on smooth white card stock. Colour with Zig Clean Colour Brush Markers and copic markers and die cut with the coordinating die. For sentiment, stamp “sending you a HUG!” from Cheerful Note Sentiments stamp set on a smooth white card stock using Majestic Violet Archival ink.

Once all the elements are ready, decorate the card as pictured. For final look, apply Crystal Clear powder using Art glitter dries clear glue.

Other Products: Die Cutting Machine, Score Board, Bone Folder, Smooth White card stock, pink card stock.

Instructions:

The finished card measures 9 x 4 inches. Cut one piece of white deluxe flower shaping paper 9 by 8 inches and score at 4 inches to make a top fold card. Place Slim Ornate rectangle die about 1/2" up past fold so that fold does not get cut. Use the same die again on a piece of paper #3A from the Garden lily collection. Ink the edge with library green ink and glue it to the folded card matching bottom and side edges. Die cut 3 times the second biggest die from the same kit in the Deluxe Flower Shaping paper and glue them on each other to make a white cardstock and glue it on the card. 

Stamp your Lily flowers with majenta hue ink onto white flower shaping paper, color the center and shade the edge with the same color. You can also color the back of the flowers. Diecut with the coordinating die. Place face down into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe flower shaping kit tools. Glue 2 layers together. In the center of the flowers make a hole and add stamens.  With a brush add a little bit of 3D crystal lacquer on your flowers. Add glue on the tips of the flowers add dip it into crystal clear powder. Redo the same thing to make other flowers in sea grass ink color.

Also stamp and die leaves with leaf green and color the center with a bit of library green ink. Use the mold to give shape to your leaves.

In deluxe flower shaping paper die cut a a 7 1/2  x 2 1/2 rectangle in paper #3A and glue it in the center of your card.  Die cut 3 times the sentiment from the same kit in paper #9B and glue them on each other to make a thick cardstock. Glue it on the card and add 3D crystal lacquer to give shine to your sentiment.

Put cheesecloth and sewing thread on the left of your card and make a bouquet arrangement on it.  For the final touch, put glue on your pattern paper on the stamen and add crystal clear powder on it.

Other Products: Archival sea grass ink, die cutting machine, scissors, cheesecloth, sewing thread, hot glue gun, water mister,

Instructions:

Cut 2 pieces of Ivory cardstock of size 9 1/2 x 6 1/2" and 9 x 6 1/2," score and fold the large piece at 1/2 inch along the longer edge. Attach the other piece to this hinge to create a card base of size 9 x 6 1/2 inches. Cut 2 pieces each of Ivory cardstock and the designer paper from HCDP1-2147 Garden Lily Paper Collection with size 1/4" lesser. Sponge the edges of each of the pieces with Pink Peony ink and adhere these panels on the front and inside panels making a thin frame around.

Use the corner dies from HCD1-7263 Swirly Accent Spray Die to cut 8 pieces on Ivory cardstock, stack and adhere 2 pieces each to make 4 corner die-cuts. Adhere these to the corners of the front panel. Use the 2 largest dies from HCD1-7367 Simple Centerpiece Die to create a frame. Die-cut 3 such frames, stack and glue them together to make it sturdy and add this to the card front using dimensional tape.

Again using the large decorative die from HCD1-7263 Swirly Accent Spray Die, cut 4 pieces on Ivory cardstock, stack and glue 2 each and adhere them over the octagon frame as shown. Add a sentiment piece to the center of this frame.

Stamp and white heat emboss a few of the leaves and flower images from HCPC-31011 Garden Lily Cling Stamp Set and HCPC-31012 Garden Lily Spray & Fillers Cling Stamp Set onto white cardstock and color them using distress inks. Cut each of the images using the coordinating dies, shape the flowers using flower shaping tools. Stack and glue 1 small and 2 large petals for the big flowers, 2 small petals for the smaller flowers and add stamens in the center.

Sponge some dries clear glue on all the flowers, spray and leaves; and add crystal clear glitter. Arrange all the ready elements to the card front as shown and adhere them using hot glue. Finally, complete the card by adding White flat-back pearls around the arrangement.

Other Products: Ivory cardstock, dimensional adhesive, funnel tray, scissors, paper trimmer, scoring board, die cutting machine, White flat-back pearls, Spun Sugar distress ink, hot glue gun, glue sticks

Instructions:

Cut out a 4.1/2" x 91/2" card base, then cut a slightly smaller rectangle from your paper collection and glue it to the base. Cut a 4" x 9" rectangle from white paper and glue it to the card.

From the white paper and the paper collection, alternately cut the biggest and the smaller from the Slim Elegant Rectangle Die set as shown. Glue with Double Dots 100pc. -3D Foam Circles.

From the white paper, cut out a smaller rectangle with a frill from the Rectangle Filigree Frame Die set, then cut out a smaller, matching rectangle from the same set and stamp it with black ink from the Cheerful Note Sentiments set.

On the white paper, stamp the elements from the Feathery Florals set with black ink. Then color with inks: Memento Lady Bug and Memento New Sprout. Cut with the matching die. Shape with the Deluxe Flower Shaping Kit.

To make lily, stamp flowers several times with Memento Rose Bud ink, then color them with the Archival Ink Rose Madder ink. Cut with coordinating die. Shape flowers with the Mold from the same collection. Fold the flowers and glue with hot glue. Add glue and add one yellow and a few green stamensin the centers.

To make the leaves, stamp several times the leaves from the Garden Lily with Memento Olive Grove ink . Color the leaves with Archival ink Olive and Memento New Sprout ink. Form the leaves with the Mold from the same collection.

Glue everything as shown in the photo. Cover with glue and glitter.

Other Products: Cutting machine, hot glue

Instructions:

Cut a piece of white cardstock, score and fold to get a 4 x 8 1/4" base. Cut a piece of paper from Feathery Florals Paper Collection to 3 3/4 x 8", the other one to 3 1/4 x 7,5" and a little bigger piece of the white cardstock. Cut out a white and a silver frame with the die No. 5 from the Slim Eyelet Rectangle. Cut out a rectangle from Feathery Florals Paper Collection with the die No. 5 from the Slim Basic Rectangle Die. Cut out a white and a silver heart with dies No. 2 and 3 from the Decorative Heart Die. Stamp 2 florals from the Petite Feathery Florals Cling Stamp Set in Tuxedo Black ink, color them and cut out with coordinating die. Cut out sentiment from Feathery Florals Paper Collection. Adhere all elements to the base as pictured. 

Stamp blossoms from the Garden Lily Cling Stamp Set in Cactus Flower and Sunflower inks onto Deluxe Flower Shaping Paper, color their edges with the same ink and their centers with the Sunflower ink, diecut with coordinating dies and shape with mold. Add Petite Pollen Stamens to all lilies. Stamp blossoms from Lush Lilac Stamp Set in Cactus Flower and Leaf Green inks onto Deluxe Flower Shaping paper and diecut with coordinating die. Shape them with Deluxe Flower Shaping tools and add some Tu Tu Pink Prills. Stamp 4 branches from Leafy Accents Cling Stamp Set in Fern Green ink, color them with Leaf Green ink, cut out with coordinating die and shape with coordinating mold. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers. Add some self-adhesive crystals.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, sisal, colored pencils, self-adhesive crystals

Instructions:

Cut a piece of white cardstock 10” x 7”, score at 5” along the long side and fold. Place the outer Filigree Companion Frame Die and cut. Add paper from the collection. Cut smaller frame from silver paper and adhere to the front of the shaped card using  Adhesive Foam Strips for dimension.

To create Clematis flowers, stamp Clematis Cling Stamp on white paper with Ranger Archival Ink Pad - Vibrant Fuchsia and cut using the coordinating dies. You will need 2 petals of each to create flowers, for bigger flower use the biggest stamp, for smaller flower use smaller size stamp. Colour the flower with Ranger Archival Ink Pad - Vibrant Fuchsia using a sponge dauber. After colouring, place the flowers into the mold and run through cutting/embossing machine. Pierce the center and glue in some stamens using hot glue gun. Add a little hot glue to the underside of the flower. Add little glue around stamens and sprinkle prills, leave it to dry.  Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

To create leaves, stamp theLarge Floral Urn Cling Stamp set leaves and the Hollyhock Petals & Leaves Cling Stamp on the white paper with Ranger Archival Ink Pad - Leaf Green, cut out with the coordinating dies, shade use this same ink and shape. Shape Hollyhock leaves using mold. Sponge the leaves with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

To create Floral Feathers, stamp the Floral Feathers Cling Stamp Set and on the white paper with Ranger Archival Ink Pad - Majestic violet, cut out with the coordinating die, shade use this same ink and Ranger Archival Ink Pad - Manganese Blue, shape. Sponge the leaves with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Stamp sentiment using Elegant Rose Sentiments Cling Stamp Set on the white paper Ranger Archival Ink Pad - Jet Black place onto the card using adhesive foam strips. Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine,

Instructions:

Ready folded black card is 9 by 6 inches. Trim panel on brown card measuring 8 3/4 by 5 3/4" and add on the card base using dimensional tape, trim panel from Feathery Florals Paper collection Sheet Number 5B which is smaller than brown panel and add this panel on the card using clear glue.

Die cut the shadow die of gate on the same designer paper add layer underneath for the sturdiness, die cut the gate die on the black card and add this gate shape on the shadow layer using clear glue.

Stamp the images from Petite Feathery Florals Cling Stamp Set on the deluxe card using leaf green ink, die cut using coordinating dies and color it using Zing brush markers. Shape from the back using shaping kit, apply clear glue using sponge and cover with Nida Tanweer Magic Glitter Powder.

For the flowers, Stamp the clematis flower images using versamark Embossing ink cover the images with snowflake embossing powder on mint card heat it using heating tool die cut the images using coordinating dies, color the centers of clematis with Salvage patina ink using daubers, use shaping stylus and shaping tool to shape the petals from back. Use hot glue to assemble the flowers as shown. For the centers add pearls using hot glue. Dab some Dries Clear glue onto a sponge, apply over the petals as desired, sprinkle with Nida Tanweer Glitter Powder and tap off.

Trim the sentiment from the designer paper add black card under the sentiment. Arrange all ready elements as shown using hot glue.

To finish it off, add Nuvo Drops, Rhinestones and decorative beads.

Other Products: Black Card, Brown Card, Mint Card, Decorative Beads, Nida Tanweer Magic Glitter Powder, Hot Glue, Versamark Embossing Ink, Pearls, Snowflake Embossing Powder, Salvage Patina Ink, dimensional Tape, Nuvo Drops.

Instructions:

Create a 5 x 7 inch card base in white cardstock. Cut a 2 x 5.5 inch piece of lavender paper from the Feathery Florals Paper Collection and adhere to the right side of card front. Cut the Filigree Accents Die in white card stock and adhere to card front as shown in photo. Cut out a 3.5 x 5.5 inch piece of green paper and adhere to the left side of card.

Stamp the window x2 with the Ornate Window Cling Stamp Set in Jet Black, sponge with Rich Cocoa, Forget Me Not and Vibrant Violet. Adhere flourish and frame from second window with foam tape for dimension.  Add glitter to flourish.

Stamp the small feathers from the Floral Feathers Cling Stamp Set in Jet Black, sponge with Forget Me Not and Vivid Chartreuse, cut out with coordinating dies and add glitter.

Stamp the peacock from the Peacock & Posies Cling Stamp Set in Jet Black, sponge with Forget Me Not, Vivid Violet and Vivid Chartreuse, cut out with coordinating dies and add glitter.

Stamp the Garden Lily Cling Stamp Set in Vibrant Violet, sponge with Vibrant Violet and Rose Madder, cut out with coordinating dies and sculpt with the Garden Lily Shaping Mold, add stamens and glitter.  

Cut out the sentiment from the paper collection. Adhere feathers, lilies, peacock and sentiment as shown.  

Other Products: White cardstock

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 10” x 7”, score at 5” along the long side and fold to create a base card of 5” x 7”. Cut a piece of silver cardstock 5” x 7” and adhere to the front of the card. Cut a piece of purple pattern paper 4 7/8” x 6 7/8” and adhere to the front of the silver card. Cut a piece of silver cardstock 4 5/8” x 6 5/8” and adhere to the front of the purple cardstock. Cut a piece of pattern paper 4 1/2” x 6 1/2” and adhere to the front of the silver cardstock.

Die cut two decorative dies from the HCD2-7328 Lattice Swirl Gateway Die - one from silver and one from Deluxe Flower Shaping Paper. Add Frosting Powder to the white decorative die with Dries Clear glue on a sponge and then adhere to the silver decorative die slightly offsetting the dies.  Adhere to the front of the card as shown.

Stamp the sentiment from the HCPC-3844 For My Friend Sentiment Cling Stamp Set in Jet Black ink to the top as shown using a stamp positioner.

Stamp the peacock image from the HCPC-31015 Peacock & Posies Cling Stamp Set and the feather images from the HCPC-31019 Floral Feathers Cling Stamp Set in Jet Black ink. Colour the images with Zig Clean Colour Real Brush Markers and die cut with the coordinating dies.  Add Crystal Clear glitter to the eyes of the feathers with Dries Clear glue. Adhere the peacock to the right of the decorative die oval with foam tape and the feathers under the peacock to make a long tail for the peacock.

Add I Cannot Tell a Lilac Prills to the peacock image over the flowers.  Add Lemon Chiffon Prills to the centres of the flowers and to the large feather.

Stamp the butterfly image from the HCPC-31018 Petite Feathery Florals Cling Stamp Set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Real Brush Markers and die cut with the coordinating die. Adhere to the card over the leaves on the top left  of the card with foam squares.. Add Crystal Ultrafine Glitter to the butterfly wings with Dries Clear glue.

Other Products: Iris cardstock, foam tape, stamp positioner

Instructions:

Card size: 6 x 6”. Cut a Simple Centerpiece card base using the largest die in the set on white cardstock. Score right side at 3” then fold down toward center fold, crease with bone folder then open flat. Cut another card front from white cardstock with the same die. Glue this piece to the bottom half only of the 3” scored side (all edges should match. This forms the easel base.

Cut green and lavender decorative paper for the front and inside of card using the same large Simple Centerpiece die. Glue the inside piece onto card but wait on the front. Use the lattice insert curvy Accent die to cut through front decorative paper piece at an angle. Cut it again from silver then glue the silver under the decorative paper off set so that silver shows. Trim any excess silver from edges of Centerpiece die cut. Glue a piece of lavender decorative paper under lattice opening then glue the card front to the base front.

Make 2 silver Octagon frames using the largest Simple Centerpiece die along with the next die in size together. Pop up the top/front silver frame and glue the inside silver frame to card.

Use a small oval die to cut a piece of silver and a piece of Fun Foam. Glue these together then glue to the inside of card to create a stop to keep easel card open (for best results this piece should be almost at the bottom of the inside).

Stamp Feathery Florals using black on white cardstock, die cut then color. Shape on the back using the largest ball stylist in the Deluxe Flower Shaping Kit. (Use pop ups under flowers and some leaves). Adhere larger floral to the front of card on the right side and glue/pop up smaller floral on top of the silver oval inside card.

Stamp Wild Rose using Deep Purple onto Deluxe Flower Shaping Cardstock. Sponge with Deep Purple, die cut then sponge edges again and use the shaping mold to form flowers. Glue 2 of the same size blossoms together to make flowers and then fill with Prills. Glue 3 on the front with Feathery Florals and 2 inside.

Cut one of the strip sentiments from decorative paper, line with silver, fish tail both ends then use a pen to make a wave.  Glue it to the front at an angle.

Glitter card randomly and glitter all the flowers.

Other Products: White cardstock, Copic Markers: BV00, BV02, V01, V12, YG61, YG82, Y11, Y15, Y38, Fun Foam sheet

Instructions:

Card size 4” x 8” (final size). Take pattenr paper from HCDP1-2149 Feathery Florals Paper Collection and cut it using die from HCD3-7431 Slim Eyelet Rectangle Die. Then take plain curvy border die and cut bottom.

Now cut two decorative border die on pattern paper using die HCD3-7442 Curvy Decorative Border Die, as shown.

Cut one die from HCD3-7447 Slim Elegant Rectangle Die on white cardstock and add sentiment from HCPC-3845 Just For You Sentiments Cling Stamp using archival ink-majestic violet and add crystal clear glitter.

Stamp some clematis flowers and leaves images from HCPC-3954 Clematis Cling Stamp Set on Deluxe Flower Shaping Paper using archival ink- Majestic Violet and Library Green. Cut them with coordinating die HCD1-7355. Color them using archival ink-majestic violet, violet, leaf green and for leaves using leaf green, library green and touch of majestic violet. Shape them using HCFB1-5006 3D Clematis Shaping Mold and use groove tool also to give some more dimension. And for the centres, color these petals with leaf green and on the edges color them with majestic violet and fringe cut them. For middle size clematis flower centres, add one layer of fringe petals. And for smaller clematis flower, add some gold beads and then sprinkle crystal clear glitter using Designer Dries Clear Adhesive.

Stamp feather image from HCPC-31019 Floral Feathers Cling Stamp on white cardstock using versamark ink and sprinkle gold embossing powder, heat it, cut with coordinating die and sprinkle crystal clear glitter, adhere using foam tape.

Arrange these feathers, flowers and leaves as pictured.

Stamp butterfly image from HCPC-7454 Petite Feathery Florals Cling Stamp on white cardstock using archival ink-mulberry, cut with coordinating die, color  using archival ink-pink peony and add crystal clear glitte. Adhere it using glue gun.

Other Products: Big Shot Plus Machine

Instructions:

My finished card size is 4 1/4" x 5 1/2". It is a fun fold card with a front closing flap. Make card base by cutting a piece of cream cardstock 7 1/4" x 5 1/2" and score at 3". Cut a piece of cream cardstock 4 1/4" X 4 1/4" and score at 1".  Attach the 1" fold to the card base making sure it is mid way up the 5 1/2" side of the card. I just eye balled it. This piece forms the closing flap.

Next cut a piece of Sheet 11A and cover the inside portion of the card.  I then cut a piece of cream cardstock 2 1/2" X 5" and glue to the inside of the card. This will fit behind the front of the card and supplies a place to write a message to the person receiving the card.  Cut two pieces of Sheet 6A to fit the closing flap front and back and glue down. Next I chose to use pieces of Sheet 5A of the paper collection to cover the front and inside of the card front.  

Now stamp the sentiment onto a piece of Sheet 6A and mat with a piece of the cream cardstock.  This finished piece will measure 1/2" x 3".  Glue to the front closing flap.

Stamp the flower petals and filler pieces onto the Deluxe Flower Shaping paper. The flower petals were stamped with Sap Green and the filler pieces were stamped with Leaf Green. Color the filler pieces with Leaf Green. I left the flower petals without additional color to make them look like a white flower. Cut out all pieces with coordinating dies. Lay the flowers onto the Mold, spritz with water and run through the die cut machine.  Lay out to dry.  Once dry, poke a hole in the center using the Golf Tool and feed through the stamens.  I used hot glue to anchor the stamens and I used two petals to create the flower.  

Decide on placement and hot glue down.  The card is finished. 

Other Products: Die Cut Machine, Hot Glue Gun, Cream Cardstock, Sap Green Archival Ink

Instructions:

For this 9" x 4" card, take an A4 sheet of heavy white cardstock, cut to 9" x 8". Score and fold in half, at 4" on the 8" side. Take the outside edge of the Slim Gateway Rectangle Die and some low tack tape, tape to the folded card, making sure to keep the folded side free of cutting lines. Run through a die cutting machine. Using the same Rectangle Die, die cut two more in yellow paper from the Garden Lily Paper Collection. Die cut another one in green paper from the Paper Collection. Adhere one yellow die cut to card front. Adhere the other two to the inside of the card. Take the inside edge of the same die and die cut in white card. Adhere to card front.

Stamp and color in Ranger Archival Sunflower ink, two sets of Lilies from the Garden Lily Cling Stamp Set, onto Deluxe Flower Shaping Paper. Add a little Pink Peony ink to the middle of the Lilies. Die cut with the matching dies. Place in the Garden Lily Flower Shaping Mold, lightly mist with water and run through a die cutting machine. Make double layers for each Lily, pierce a hole in the middle with the tool from the Deluxe Flower Shaping Kit. Thread through Petite Pollen Stamens and Rock Candy Stamens. Off set the petals and add Designer Dries Clear Adhesive. Stamp and color in Ranger Archival Olive ink a few Garden Lily Leaves onto Deluxe Flower Shaping Paper. Die cut with the matching die. Lightly shape with the stylus from the Deluxe Flower Shaping Kit. Adhere Lilies and Lily Leaves in a group on the card front with hot glue.

Stamp in Olive ink, three sets of buds and one large Bouquet from the Garden Lily Bouquet and Buds Cling Stamp Set. Color with Pink Peony ink. Die cut with the matching dies. Lightly shape the Buds with the stylus from the Deluxe Flower Shaping Kit. Stamp the small Bouquet from the Garden Lily Spray and Fillers Die in Olive ink onto Deluxe Flower Shaping Paper. Color with Pink Peony ink using a Dauber. Die cut with the matching die. Adhere the small Bouquet to card front below the Lilies. Adhere the large Bouquet to the inside of the card.

Stamp a Sentiment from the Special Birthday Sentiments Cling Stamp Set onto white card, in Olive ink. Die cut with a tag die from the Ticket & Tags Die Set. I used the base of the scalloped tag, twice. Adhere Sentiment across the small Garden Lily Bouquet Spray.

Sponge Designer Dries Clear Adhesive over the Lilies, Leaves, Bouquet Spray and edges of the Tag. Add clear glitter. All done.

Other Products: A4 white heavy weight cardstock, scoreboard, low tack tape, die cutting machine, white card, water spray bottle, hot glue, clear glitter.

Instructions:

Make a 5 x 7" card base using white card stock. Cut pattern paper from the paper collection a little smaller than the card base and add on the card front. Cut two pieces of gold die cuts from the Diamond fleur die and adhere on the card base facing each other. Add 2 more pieces of white die cuts  from the same die and add on the gold die cuts.

Cut a piece of gold die cut from the Filigree Oval Frame die and adhere in the centre of the card.

Stamp the feather images from the floral feathers stamp set with jet black ink on Deluxe Flower Shaping paper and colour with Zig markers. Cut with matching die.

Stamp the flowers from the rustic sunflower stamp set in cactus flower on Deluxe Flower Shaping paper.Colour the flowers using Archival inks Cactus flower, Sunflower and Plum using sponge dauber. Cut using matching die. Shape the flowers in the flower shaping mold for sunflower. Emboss the flowers with the Deluxe flower shaping tool kit. Layer the flowers together. Cup them and add the mix of two prills using designer dries clear glue.

Make leaves from the Leafy Accent set. Stamp the images of the leaves with leaf green ink and English Ivy ink on Deluxe Flower Shaping paper. Colour with matching inks and cut using the coordinating  die. Shape the leaves in the Leafy Accent  shaping mold.

Arrange the feathers and the flowers on the card front using hot glue gun. Finish the card by adding a sentiment from the paper collection.

Other Products: Die cutting machine, scoring board, hot glue gun and sticks

Instructions:

Cut 2 pieces of Ivory cardstock of size 9 1/2 x 6 1/2" and 9 x 6 1/2", score and fold the large piece at 1/2 inch along the longer edge. Attach the other piece to this hinge, to create a card base of size 9 x 6 1/2 inches. Cut 2 pieces each of Ivory cardstock and the designer paper from HCDP1-2147 Garden Lily Paper Collection with size 1/4th of inch lesser. Sponge the edges of each of the pieces with Goldenrod ink and adhere these panels on the front and inside panels making a thin frame around. 

Use the plain die from HCD3-7442 Curvy Decorative Border Die, cut a piece of the designer paper as shown. Using the decorative border die from the same set, cut 2 pieces each on Ivory cardstock and glue them to either side of the designer paper. Adhere this panel to the card base using dimensional tape. 

Use HCD2-7430 Decorative Heart Die, cut the heart die on Ivory cardstock and a mat layer with the designer paper. Stamp the sentiment on Ivory cardstock with HCPC-3844 For My Friend Sentiments Cling Stamp Set, using Goldenrod ink and cut using matching tag die. Sponge the edges using the same ink and adhere it to the center of the decorative heart die-cut. 

Stamp and White heat emboss a few of the leaves and flower images from HCPC-31011 Garden Lily Cling Stamp Set and HCPC-31012 Garden Lily Spray & Fillers Cling Stamp Set onto White cardstock and color them using distress inks. Cut each of the images using the coordinating dies, shape the flowers using flower shaping tools. Stack and glue 1 small and 2 large petals for the big flowers, 2 small petals for the smaller flowers and add stamens in the center. 

Sponge some dries clear glue on all the flowers, spray and leaves; and add crystal clear glitter. Arrange all the ready elements to the card front as shown and adhere them using hot glue. Finally, complete the card by adding yellow rhinestones around the arrangement.

Other Products: Ivory cardstock, dimensional adhesive, funnel tray, scissors, paper trimmer, scoring board, die cutting machine, rhinestones, Rusty Hinge distress ink

Instructions:

The ready top-fold card from smooth white cardstock measures 6 1/2" by 6 1/2". To prepare the card base, cut 2 pieces of white cardstock measuring, 6 1/2" by 7" and 6 1/2" by 6 1/2". Take a 6 1/2" by 7" cardstock panel and score at 1/2" on 7" length and crease well. This will make a hinge on the panel to secure another 6 1/2" by 6 1/2" panel. 

Next, choose a light plainer paper from the designer paper collection and chop 6" by 6". Choose another coordinating paper and chop measuring 5 3/4" by 5 3/4". Layer the panels as shown on the ready card base. 

Choose floral paper from the same designer paper collection and cut measuring 3 1/2" by 5 3/4". Cut the top and the bottom edges using a basic curve die from the Curvy Decorative Border Die set. Next, cut 2 each from white and luxe gold cardstock using the same die set. Glue the gold die on top of the white and prepare 2 lacy borders. Adhere these lacy borders on the top and the bottom edges as shown and layer the panel on the ready card front. 

Cut a tag from luxe gold cardstock using Album Tags and Accents Die and mat a solid tag from the designer paper collection. Prepare a die cut using the Simply Elegant Centerpiece Die set, chop it, and adhere it under the top and the bottom edges of the tag, peeking out a little on both edges. 

Stamp the required images from the Floral Feathers Cling Stamp Set and Feathery Florals Cling Stamp Set with black archival ink on smooth white cardstock and paint them using Zig Clean Clear Brush Markers. Cut the painted images using their coordinating dies. Adhere an extra die cut to add strength to the painted images. 

Once all the elements are ready, layer the painted images on the right side of the tag and complete the card with a sentiment strip from the same collection.

Other Products: Smooth white cardstock, Die cutting machine, Score-board, Sharp scissors, Glue Dots

Instructions:

Card size is 5 x 7”. Score and fold 10 x 7” white cardstock at 5” on the long side to create a side fold card base. Cut two pieces of white cardstock 4 7/8 x 6 7/8” and two pieces of sheet 11B from the Feathery Florals Paper Collection 4 3/4 x 6 3/4”. Ink the edges of the designer paper using Coastal Coral ink and adhere each one to the white mat layer. Adhere the panel to the inside of the card using dries clear adhesive. Stamp the ‘On Your special Day’ sentiment from the Celebrate Love Sentiments Cling Stamp set with Tuxedo Black ink on 4 x 6” white cardstock. Use a decorative punch on the corners and adhere to the inside of the card. Adhere the other panel to the card front using dimensional tape. Using the Simply Classic Oval Frame Die, cut from white cardstock, sponge with dries clear adhesive and cover with Rajni Chawla’s Crystal Clear Adhesive. Adhere the frame to the card front. 

Stamp the Petite Feathery Floral image on white cardstock using Leaf Green Archival ink, color with Leaf Green and Coastal Coral inks, diecut using the coordinating die and lightly shape using the Deluxe Flower Shaping kit. Adhere to the right side of the oval frame using dimensional squares and dries clear adhesive. Stamp the butterfly from the same set on white cardstock using Tuxedo Black ink and color using Stampin’ Blends markers – Light Calypso Coral, Dark Smokey Slate and Light Just Jade. Diecut using the coordinating die, lightly shape and adhere to the left side of the oval. Cut the sentiment from the paper collection sheet 6A, ink the edges with Coast Coral ink and adhere inside the oval.

Stamp the Clematis flowers on Deluxe Flower Shaping Paper using Coastal Coral Archival ink and color both sides of the flowers with the same ink. Diecut using the coordinating dies and shape in the 3D Clematis Shaping Mold. Pierce the centers using the Groove Golf Tool and insert Bridal Bouquet Stamens. Secure the stamens with hot glue. Sponge the flowers with dries clear adhesive and sprinkle with Crystal Clear Glitter. Adhere the flowers to the Petite Feathery Floral image using hot glue.

Add sparkle to the card by randomly sponging with dries clear adhesive and sprinkling with Ultrafine Transparent Glitter.

Other Products: White Cardstock, Misti, Funnel Tray, Dimensional Squares, Hot Glue Gun, Stampin’ Blends Markers - Light Calypso Coral, Dark Smokey Slate and Light Just Jade, Corner Punch,

Instructions:

Prepare a white card base 8 3/4 x 3 3/4”. Using the Slim Line Eyelet rectangle dies, cut the first layer from the Rustic Sunflower Paper collection, cut 2 more using smaller sizes from the Luxe Sliver Card stock. Use the Slim Line Basic dies and cut 2 from the Rustic Sunflower paper and adhere on top of the Sliver as shown.

Stamp the Leafy Accents on white card stock with the Cottage Ivy ink, color in with the Vivid Chartreuse ink and cut out with the coordinating die. Lightly high light the edges with more of the Cottage Ivy ink. Place in the matching mold and run through the die cut machine to shape.  Adhere one at the top and one at the bottom of the card.

Stamp the Rustic Sunflowers on white with the Tiger Lily ink. Color with the Sunflower ink and cut out with the coordinating die. Highlight the edges with more of the Tiger Lily ink. Place in the matching mold and run through the die cut machine to shape. Put 2 flowers together making one flower, arrange on top of the leaves. Add Power Outage Prills in the center of each flower.

Stamp the sentiment on white with black ink. Cut apart and add to the side of the flowers.

To finish, add glitter to all the leaves and flowers.

Other Products: Paper trimmer, Die cut machine, Hot glue gun, Misti,