Instructions:

Ready side fold card measures 6" × 8". Cut a mat from designer paper collection measuring 5.75" ×7 .75", distress edges with matching ink and adhere on ready card base. Cut another mat from designer paper collection measuring 4" × 6", create texture by scoring lines and adhere it on white cardstock measuring 5.5" × 7.5". Glue this mat to card using dimensional tape.

 Cut 4 decorative corners from white cardstock and 4 from Luxe Gold cardstock using die from Delicate Daisy Corner & Border die. Cut 4 base corners from designer paper using die from the same set. Glue two corners together, one white and one gold but make sure to offset a little bit.  Now glue it on designer paper corner. Similarly, create all pieces. Arrange these pieces on card to create a frame and glue using foam dots as pictured. Diecut white and gold cardstock using dies from Album Tags and Accents die set. Stamp sentiment on white diecut using mulberry ink, glue it on gold diecut and adhere it on centre of the card as pictured. Glue some sequins.

Stamp classic rose flowers on deluxe flower shaping paper using magenta hue ink and cut with coordinating die. Paint flowers with magenta Hue and Mulberry ink. Shape with round object and create 3d flowers. Stamp classic rose leaves using fern green ink and Holly Berry leaves using leaf green ink, cut with coordinating dies. Paint with same ink and shape Classic Rosesleaves using shaping mold. Stamp lush lilac flower using sea grass ink and cut with coordinating die. Shape using shaping mold, pierce the centre and add stamen. Arrange  the ready elements on card and glue them using hot glue.

Stamp a butterfly on vellum paper using white ink and heat emboss using white embossing powder. Cut with coordinating die and glue it on card as pictured.

Other Products: Smooth white cardstock, Sequins, Sea Grass Archival,

Instructions:

The finished card measures 5 3/4 x 5 3/4 inches. Cut a piece of deluxe flower shaping paper 11 x 5 3/4 inches and score at 5 3/4 inches to make a top fold card. Cut a 11 x 5 3/4 inches in pink paper #9B and fold at 5 3/4 inches, glue on the base

Cut different pieces of paper from Friendship Rose Collection as follows: 5 1/2 x 5 1/2 inches in black paper #11B. 5 1/4 x 5 1/4 inches in green paper #7B.  5 x 5 inches in deluxe flower shaping paper. Glue all of them inside the card.

Cut the top of your card with 2 borders from the Curvy accent border die. Diecut it again in a white paper and in a black paper and glue it over the border on your card.

Stamp flowers with the Wild Aster collection onto white flower shaping paper with the Melon mambo ink and color in the same ink.  Also make some flowers in leaf green. Diecut with the coordinating die. Give further shape with Deluxe Flower Shaping kit tools. Use 3 layers to make a flower. Add assorted pearls stamens in the center of the flowers. Glue them together and add crystal clear glitter with glue to make them shine.

Stamp flowers with the Hollyhock collection onto white flower shaping paper with the Melon Mambo ink and color in the same ink. Also make one with the color leaf green. Diecut with the coordinating die and shape with the shaping mold. Give further shape with Deluxe Flower Shaping kit tools. Use 2 layers to make a flower. Add assorted pearl stamens in the center of the flowers. Glue them together and add crystal clear with glue to make them shine.

Stamp in leaf green leaves from the Leafy accents. Color with the same ink. Cut with the coordinating die and shape with the shaping mold.  

Put cheesecloth and sewing thread on your card and glue your flowers and leaves over. Add green assorted beads stamens and lace through your bouquet. Add tickets you cut from the paper #12A. 

Stamp your sentiment from the Just for you kit in pink inside the card and glue 2 flowers and 1 leaf next to it. Make dots with green stickles all around the top of your card.

Other Products: Die cutting machine Cut’n’boss, heat gun, water mister, hot glue gun, hot glue, scissors, cheesecloth, lace, sewing thread, melon mambo stampin’ up ink, lime green stickles,

Instructions:

Ready tent fold card measures 9" × 4". Cut a mat from designer paper collection measuring 3.75" × 8.75". Adhere it on card base. Cut another mat from designer paper collection 3.25" × 8.25", adhere it on white cardstock which is 1/8 of an inch bigger on all four sides. Mat it on card using dimensional tape. Die cut white and gold cardstock using die from Slim Lattice Oval die set. Glue both together and adhere to card using foam dots. Cut oval pieces from white cardstock and designer paper. Create texture on designer paper die cut by scoring lines. Glue it on white oval piece. Adhere it on card as pictured. Cut an oval piece from white cardstock, stamp sentiment on it using mulberry ink and glue it on card. 

Stamp classic rose flowers on deluxe flower shaping paper using magenta hue ink and cut with coordinating die. Paint flowers with magenta Hue and Mulberry ink. Shape with round object and create 3d flowers. Stamp classic rose leaves using fern green ink and Holly Berry leaves using leaf green ink, cut with coordinating dies. Paint with same ink and shape Classi Roses leaves using shaping mold. Stamp lush lilac flower using sea grass ink and cut with coordinating die. Shape using shaping mold, pierce the centre and add stamen.

Arrange ready elements on card and glue them using hot glue. 

Other Products: Smooth white cardstock, Hot Glue, Sea Grass Archival,

Instructions:

Card size: 3 7/8 x 8 1/2". Cut the outer shape from black decorative paper (Friendship Rose Paper Collection) using the large Slim Eyelet Rectangle die, cut the top with the end of the Curvy Accent Border (Eyelet Edge edge). Using the Slim Basic Rectangle die to fit, cut a layer of Luxe Silver and foam sheet. Cut the top with the Curvy Accent Border (plain edge) die to match the top of the Eyelet in curved shape. Cut a piece of coordinating decorative paper to 3 1/4" x 8” then cut the top with the plain edge Curvy Accent Border to match the curve shape of the other tops. Glue panels in order on top of a folded slim card size 3 5/8” x 8” (this will insure that none of the white card base shows under the black eyelet layer).

Stamp the sentiment using Vibrant Fuchsia onto white cardstock then cut out using the Decorative Heart die. Cut a foam sheet the same size then glue it under the sentiment and onto card on top of decorative paper heart (if that paper was chosen).

Stamp the Small Wild Rose onto Deluxe Flower Shaping Paper using Vibrant Fuchsia then sponge with Magenta Hue, die cut then sponge edges and backs with Vibrant Fuchsia. Shape all the blossoms in the 3D shaping Mold then glue 2 of the same size together for each flower (stamp side up), except the bud which is only 1 blossom and stamp side down so that when petals are squeezed together to form the bud, the stamp side will show. Punch a small pointy flower from green to make a sepal for the bud. Pierce all the open blossoms in the centers then thread the silver pearl stamen through the centers, secure with hot glue then trim the backs of all threads. Glitter the flowers with Crystal Clear glitter.

Stamp the Leafy Accent leaves on Deluxe Flower Shaping Paper using Fern Green then sponge with Leaf Green and a little Magenta Hue. Die cut then sponge the backs and shape in the mold. Cut leaf into 2 or 1 leaf sections. Glaze the tops with 3D Lacquer mixed with shimmer additive (or whatever you have like lacquer).

Arrange leaves and flowers onto card at the bottom left side. Randomly glitter card using a sponge and Crystal Clear.

Other Products: White cardstock, foam sheet (like Fun Foam), Big Shot Plus (large format cutter), Acrylic shimmer additive, small flower punch with pointy petals.

Instructions:

Prepare a 4 1/2 x 9 1/2" white card base with a piece of the Friendship Rose paper 5B on top slightly smaller with foam strips on the back. Cut 2 of the Delicate Daisy Borders out of the Friendship Rose paper 3A. Back the 2 together and adhere on the center of the card.

Stamp the sentiment on white and cut out with the Decorative Heart die, add foam dots to the back and adhere to the center of the card. Using another piece of the Friendship Rose paper and the Decorative Heart dies, cut out and add on top of the heart as shown.

Stamp one of the Leafy Accents with Cottage Ivy on white, color in with the New Sprout ink. Cut out with the coordinating die, highlight the edges with more of the Cottage Ivy, place in the matching mold and run through the die cut machine to shape. Add glitter and set aside to dry.

Stamp the Small Wild Roses on white with the Vibrant Fuchsia ink, color with the same. Cut out with the coordinating die, place in the matching mold and run through the die cut machine to shape. Put 3 together to make one flower. Glitter and allow to dry.

Adhere both leaves and flowers on the left side of the card.

To finish, add Gold flakes to the center of each flower.

Other Products: Paprer trimmer, Die cut machine, small foam dots, Gold micro beads,

Instructions:

Cut a piece of white cardstock to 6.5 x 11", score at 5.5" and fold to get a base. Cut out 2 pieces of paper from the Sweet Magnolia Paper Collection: to 6 4/16 x 5 4/16" and to 5 11/16 x 3 15/16". The last one cut out with the borders from the Curvy Accent Border Die. Add a silver border. Use another border die from the Curvy Accent Border Die and cut out white and a silver border. Cut out two white and two silver corners with the die from Delicate Daisy Corner & Border Die. Cut out a white and a pink heart with die No. 2 from the Decorative Heart Die. Cut out a silver heart with die No. 3 from the same set. Stamp the sentiment in Vibrant Fuchsia ink using Friendship Sentiments Cling Stamp Set and cut it out with Decorative Heart Die. Use the same die and cut out a white and a silver frame. Adhere all elements to the base as pictured.

Stamp flowers with Lush Lilac Cling Stamp Set and Small Garden Zinnia Cling Stamp Set in Pink Peony, Majestic Violet and Vibrant Fuchsia inks onto Deluxe Flower Shaping Paper and diecut. Use the Stack and Store daubers to color flowers with the same inks. Shape lilacs and zinnias with Deluxe Flower Shaping stylus. Add some Lettuce Entertain You Prills to the center of each flower. Stamp 3 branches from Leafy Accents Cling Stamp Set in Fern Green ink, color them with Leaf Green ink, cut out with coordinating die and shape with coordinating mold. Stamp 6 branches from Cottage Tree 'scapes Cling Stamp Set in Fern Green ink, color them with Leaf Green ink and cut out with coordinating die.

Use dimensional adhesive and hot glue to attach all elements onto card as pictured. To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers. Add some pearls. 

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, self-adhesive pearls

Instructions:

My card size is a slimline 9" x 4". I used the Deluxe Flower Shaping Paper and made the card base. Cover the front with a piece of Sheet 3A of the paper collection. Cover the inside of the card with a piece of Sheet 1B of the Eloegant Rose Frames paper collection. Using the curved border die and one of the decorative dies that does not cut an edge, cut the front piece of the card giving a beautiful cut out border to the card front. I think the die I chose is quite simple but elegant and I just love the way it looks.

Stamp the Wild Rose flower petals using Magenta Hue ink and color the centers with Golden Rod ink and then the edges with Magenta Hue. Cut out with coordinating dies. Spritz with water and lay onto the mold then run through the die cut machine. Turn out onto the desk to dry. Stamp the Wild Rose leaves and the Leafy Accents with Leaf Green and then color with same Leaf Green ink. Cut out with coordinating dies and then edge them with Olive ink to give them more dimension. Lay onto coordinating mold and spritz with water then run through the die cut machine. Turn out onto the desk to dry.

When everything is dry, hot glue two petals of the flowers together then add Prills to the centers of these. Decide on placement and glue down using hot glue. The card is finished.

Other Products: Die Cut Machine, Hot Glue Gun

Instructions:

Create a top fold card from a smooth white card stock measuring 5” x 7”. Choose the designer paper from Friendship Rose Paper Collection and cut to size measuring 4 1/2” x 6 1/2”. Next, mat this paper on Luxe Gold Card stock measuring 4 3/4” x 6 3/4”. Mat this ready panel on white card base using dimensional tape.

Die cut decorative heart from white card stock, pink designer paper and 2 from Luxe Gold card stock using two heart dies from Decorative Heart Die set. Stack both die cuts together with gold die cut slightly offset. Adhere it on the card as shown using tacky glue.

Die cut again same decorative heart from green designer paper and white card stock. Stack them together for extra strength. Now choose a designer paper from the same collection and die cut using a solid heart die from Decorative Heart Die. Stamp a sentiment “You have a special place in my heart” from Friendship Sentiments Cling Stamp set on a die cut heart using deep purple archival ink. Now create a shaker element using foam tape, sequins and acetate sheet and adhere it on card as shown.

Stamp the all the images from Budding Rose Heart Cling Stamp Set and stamp both single roses twice from Friendship Rose Heart Cling Stamp Set using jet black archival ink and paint these images using Zig Clean Clear Brush Markers. Die cut these images using coordinating dies. Using heart die from Budding Rose heart die and cut from luxe gold card stock and stack it behind the coloured image of heart slightly offset. Cut this heart into half and adhere it on the shaker heart using foam tape. Now glue all the single roses together to make a bunch and adhere it on a card using foam tape. Now die cut an accent from luxe gold card stock using Filigree Border & Accents Die and use it as a ribbon on the bunch of roses. Again die cut an accent from luxe gold card stock using Filigree Accents Die and adhere it on the left corner of card.

Stamp the roses from the classic rose cling stamp set on vellum with versamark watermark and heat emboss them in white and color them using Lulu Lavender by memento and a hint of Majestic Violet in the centre. Stamp the leaves from the leafy accents cling stamp set with archival fern green and color using leaf green archival ink and Vivid Chartreuse archival ink. Cut the flowers and leaves using their coordinating dies and shape them using the coordinating 3D shaping mold.

Stamp the  images of small butterflies from Large Floral Butterfly Cling Stamp Set on vellum with versamark watermark ink and heat emboss them in gold. Cut these butterflies using coordinating die.

Once all the elements are ready assemble the card as shown. For final look apply Crystal Clear powder to the flowers using Art glittery dries clear glue. 

Other Products: Smooth white card stock, dimensional adhesive, hot glue, hot glue gun, die cutting machine, scoreboard, nuvo drops, Spectrum Noir glitter brush pen, scoreboard. Versamark watermark ink pad. Golden embossing paper.

Instructions:

For the gatefold part of this 9" x 6" card, cut a piece of A4 white card to 8" x 9" and score at 1" on either side of the 8" side. Fold and burnish with a bone folder. Cut one piece of white card to 9" x 6" for the base.

Tape two dies together, a decorative border and a plain border, from the Curvy Decorative Border Die Set. Mark the middle of the 8" side of the scored card, top and bottom with a pencil. Adhere the dies with low tack tape to these marks. Start with the plain curvy die, then a decorative die. Run through a die cutting machine. You should now have two pieces of white card, one decorative, one plain curvy.

Repeat for the left side, (plain curvy) of the gatefold, by taping the floral curvy die to the curvy edge of the card, followed by the circle curvy die. Run through a die cutting machine. The two pieces should match up. Cut a piece of green paper from the Friendship Rose paper pad to 9" x 6". Adhere the green card to the gatefold pieces, by gluing the folded edges to the rear. Glue the 9" x 6" piece of white card to the back to neaten. You now have a gatefold card.

To decorate, cut a floral roses paper to 4" x 9". Mark the middle with a pencil, top and bottom, die cut down the middle with the plain Curvy Borders edge die. Trim to fit. Adhere to both sides of the card. Die cut another Curvy Decorative Border in white card, adhere on top of the pretty Roses paper, matching the curvy line.

Die cut four hearts from the Decorative Heart Die Set in white card. Die cut one in green paper from the paper pad. Die cut the fancy heart in white card. Adhere the fancy heart to the green heart, adhere to the front left side of the card. Cover the back of the heart with a white heart to neaten the back.

Stamp a sentiment from the Friendship Sentiments Cling Stamp Set in Ranger Archival Jet Black ink onto white card. Die cut with the Decorative Heart Die. Adhere to the right side of card at a slight angle. Line up and cut off the excess of a white heart for the reverse side, adhere the heart to neaten the back.

Stamp and color four sets of Classic Roses and Leaf sets, in Ranger Archival Light House ink and Memento New Sprout ink, onto Deluxe Flower Shaping Paper. Color with the same inks. Die cut with the matching dies. Place in the Classic Rose Flower Shaping Mold, lightly spritz with water and run through a die cutting machine. Tap out and lightly ink the edges of the leaves in Light House ink.

Gently twist the tips of all the petals of the Roses with your fingers or the tips of a pair of tweezers. Pierce a hole in the middles, thread white stamens from the Pastel Bead Stamens - Medium, through two layers of petals. Off set the petals as you go and glue into place. Make one extra-large, two large and two medium Roses. Adhere the Roses to the heart with hot glue. Adhere the leaves with hot glue. Sponge Designer Dries Clear Adhesive to the flowers, leaves and pretty border. Sprinkle with clear glitter. All done.

Top Tip: Stamp the Roses out first onto white card, so that you can see all the size differences.  

Other Products: A4 white card, score board, bone folder, white card, pencil, low tack tape, die cutting machine, water spray bottle, paper piercer, tweezers, hot glue, clear glitter.

Instructions:

Cut out the white base of the card and fold it to 4 1/2" x 10". From the Friendship Rose paper collection, cut a slightly smaller rectangle and glue to the base. Cut white paper frames from the Slim Eyelent Rectangle Die set. Then cut out of paper from the collection using the Slim Basic Rectangle Die. Then glue the layers  with Double Dots 100 pc. -3D Foam Circles.

Cut an openwork heart from the Decorative Heart Die set from white paper and adhere it as shown. From the same set of dies, cut a heart in white paper and paper from the collection. Then, on the heart from the collection of paper, stamp the sentiment from the Friendship Sentiments set with black inkand glue.

Stamp a rose from the Friendship Rose Heart set in black ink on white paper, then cut with the matching die. Adhere the ribbon. Colorize with watercolor markers.

Glue as pictured.

Other Products: Die Cut Machine, watercolor markers, ribbon

Instructions:

Card size 9” x 4” (final size). Take pattern paper from HCDP1-2145 Friendship Rose Paper Collection, cut it from HCD3-7431 Slim Eyelet Rectangle Die (2nd largest die) .Take another layer of die and cut it on luxe silver cardstock. Now cut another layer from die HCD3-7432 Slim Basic Rectangle Die (3rd largest die) on pattern paper, and adhere it on silver cardstock using designer dries clear adhesive. Now adhere this layer using foam tape.

Now cut another layer of HCD2-7426 Oval Filigree Frame die on luxe silver cardstock, adhere it using foam tape, and another layer on white cardstock adhere it using designer dries clear adhesive. Cut another layer of oval die on white cardstock and add sentiment from HCPC-3845 Just For You Sentiments Cling Stamp using archival ink-light house, adhere it using foam tape.

Stamp some flower petals from HCPC-3906 Small Wild Rose Cling Stamp on deluxe flower shaping paper using archival ink-magenta hue and cut it with coordinating HCD1-7289 Small Wild Rose Die and color them using archival ink-magenta hue and leaf green. Shape them using Small 3D Wild Rose Shaping Mold. Create two rose flowers. Add some Lettuce Entertain You Prills for one flower.

Stamp some leaves from HCPC-3835 Leafy Accents Cling Stamp on deluxe flower shaping paper using archival ink- English ivy and cut them with coordinating die. Color them using archival ink-leaf green and english ivy. Shape them using HCFB1-467 3D Leafy Accents Shaping Mold.

Arrange all flowers and leaves as pictured.

Other Products: Big Shot Plus Machine.

Instructions:

Card size is 3 3/4 x 8 1/2”. Score and fold 7 1/2 x 8 1/2” white cardstock at 3 3/4” on the short side to create card base. Cut two mat layers from white cardstock 3 1/2 x 8 1/4”. Stamp the sentiment ‘Hope your day is as Special as you are’ from the Special Birthday Sentiments Cling Stamp set on one of the mat layers using Vibrant Fuchsia ink and adhere to the inside of the card using dries clear adhesive. Using the Slim Lattice Oval Die, cut from white cardstock, spray with adhesive, cover with Rajni Chawla’s Crystal Clear glitter, adhere to the second mat layer and adhere to the card front using dimensional tape. Stamp the ’Hey it’s your birthday’ sentiment on the smallest diecut using Vibrant Fuchsia ink, spray and glitter and adhere to the center of the large diecut using 3D dots. 

Stamp the Wild Asters on Deluxe Flower Shaping Paper using Vibrant Fuchsia ink, stamp the leaves using English Ivy ink, color using the same inks and diecut using the coordinating dies. Add a little extra ink to the tips and shape using the Deluxe Flower Shaping Kit. Adhere three petals together, slightly offset, using hot glue to create the large flower and two petals for the smaller flowers. Add a puddle of hot glue to the flower centers and cover with Lemon Chiffon prills. Sponge the flowers and leaves with dries clear adhesive and cover with Crystal Clear glitter. Adhere the flowers and leaves to the top left of the card front using hot glue.

Make a multi-loop bow with fuchsia satin edged sheer ribbon using the Bow-it-All V2 and adhere as shown using hot glue. 

Other Products: Diecutting Machine, White Cardstock, Spray Adhesive, Bow-it-All V2, Misti, Fuchsia Ribbon, Dimensional Tape, Hot Glue Gun, Funnel Tray

Instructions:

Make a slim line card base using the outermost die from the slim basic rectangle die set. Cut a mat layer from the paper collection using the outermost die from the slim eyelet rectangle die set and adhere this on the card front.

Cut another piece from the paper collection using the slim basic rectangle die set using the second biggest die. Cut out a window in this piece using the coordinating die from the slim basic rectangle die set.Add  a piece of background paper at the back of this window. Cut out a frame from the basic slim rectangle de set. And acetate sheet cut to the size of this window and attach sheet at the back of the frame. 

Add the shaker elements on the background paper of the second panel and cover the frame with acetate sheet. Attach this piece on the card front using clear glue. Cut a piece of decorative die cut from the slim lattice oval die set with Luxe Gold card stock. Trim this die and attach to the front.

Stamp the rose flower images with pink peony archival ink on the Deluxe Flower shaping paper. Add some shading with the same ink using blending brush. Cut with matching die and shape the flowers in the 3D flower shaping mold for rose. Make the rose flower. Stamp Leafy Accents leaves with the olive green colour on the flower shaping paper. Colour with leaf green ink and cut with matching die. Shape in the mold.

Add the flowers and the leaves on the card front. Finish with the sentiment.

Other Products: Die cutting machine, scoring board, acetate sheet, shaker elements

Instructions:

Score and fold a 6.5“ x 8” piece of  white card at 3.25” to create a narrow 8 x 3.25" card base.

Diecut a pink paper from the collection using the 2nd largest plain slim rectangle, edge with lilac posies ink and adhere to a white card die cut of the 2nd largest eyelet rectangle. Use dries clear adhesive to adhere to the front of the card base.

Diecut a blue paper from the collection using the 4th size slim plain rectangle, use the curvy accent border to die cut the pattern into the paper and use danube blue ink to add a border to the edges of the paper. Adhere to a white card die cut of the 4th size eyelet rectangle. Adhere this panel to the card base using foam pads.

Die cut a pink paper and white square from cut mat create 2A, adhere together. Die cut the image from the paper collection using cut mat create 2B and adhere this to the pink square, add lilac posies ink around the edge.

Stamp the large holiday star x2 onto luxe silver card using danube blue ink, sprinkle with clear embossing powder, remove excess and heat to set. Die cut the first star using the largest die and snip into the star to adhere to the back of the snowman panel as shown. Use foam pads to adhere to the card base.

Die cut the sentiment tag from the holiday star set and stamp the sentiment using danube blue ink. Adhere the star on the tag to the centre of the diecut of the smaller large holiday star and adhere to the left of the snowman.

Stamp the smaller snowflakes using lilac posies ink onto luxe silver card, cover with clear embossing powder, remove excess and heat to set, die cut and adhere to the card .

Other Products: White card stock, foam pads, clear embossing powder

Instructions:

The ready top fold card measures 8 1/2″ by 5 1/2″. To prepare the card base, cut a smooth white cardstock measuring 81/2″ by 5 1/2″ and a second piece measuring 9" by 5 1/2".  On 9" length, score at 1/2" and crease well. Glue the other panel on top to create a top fold card base. For the first layer, choose the paper from the Elegant Rose Frames designer paper collection and cut it 1/4" smaller than the main card front so that it shows a white border all around, Mat a golden layer behind it using Luxe Gold cardstock. 

Cut 2 pieces of filigree frames in white and glue them together to add some extra strength to the big frame. Layer it on the card using foam dots. Next cut the light color solid oval and layer it in the center. Next, cut the inner 2 frames using Luxe Gold cardstock and glue them together. Behind the golden frame add a solid green color oval cut using the same die. 

For Blue Asters, stamp a couple of petals from Wild Aster Cling Stamp Set using French Ultramarine Archival Ink and cut them using its coordinating die. Color the petals using the same ink and shape them using golf groove tools. Create 3 medium-sized Asters. Complete the flowers by adding the prills in the centers.

Stamp, color and cut a few wisteria flowers using Leaf GreenFlower Archival ink and shape them using a flower shaping kit. Add flower pollens using a glossy accent and use these flowers as fillers.

Stamp 2 sets of leaves using Leafy Accent stamp and Olive Green Archival ink and cut them using its coordinating die. Color the leaves using the same inks and shape them using a deluxe flower shaping kit.

Stamp the butterfly image from Small Floral Butterfly Accents Cling Stamp Set with Versafine on Rajni Chawla’s Vellum Flowerite and sprinkle white heat embossing powder. Dust extras and heat set the image using a heat tool. Cut the butterfly using its coordinating die. Stamp the Wild Aster Spray several times with Versafine on Rajni Chawla’s Vellum Flowerite and sprinkle white heat embossing powder. Dust extras and heat set the image using a heat tool. Cut the sprays using its coordinating die.

Once all the elements are ready, make a small floral display using all flowers, fillers, and foliage. Complete the card by adding a stamped sentiment from Special Birthday Sentiments Cling Stamp Set.

Other Products: Smooth white cardstock, double-sided tapes, Glossy Accent, Score Board, Die Cutting Machine

Instructions:

Cut a piece of white cardstock to 7 x 10", score at 5" and fold to get a base. Cut out 3 pieces of paper from the Sweet Magnolia Paper Collection: to 6 13/16 x 4 13/16", to 4.5 x 6 6/16" and to 3 1/4 x 6 1/4". First two adhere to the base. The last one cut out with the border from the Curvy Accent Border Die. Use combinations of border dies from the same set and cut out 3 white and 2 silver borders. Stamp the sentiment in Vibrant Fuchsia ink using Friendship Sentiments Cling Stamp Set and cut it out with Slim Lattice Oval Die. Use the same die and cut out a white and a silver frame. Adhere all elements to the base as pictured.

Stamp blossoms from Rustic Sunflower Cling Stamp Set in Buttercup  and Sunflower inks onto Deluxe Flower Shaping paper, color them with Buttercup ink. Then diecut with coordinating die, shape with coordinating mold. Stamp flowers from Lush Lilac Cling Stamp Set in Magenta Hue ink onto Deluxe Flower Shaping paper and diecut with coordinating die. Shape them with Deluxe Flower Shaping Kit tools. Put some Ribbit prills in the center of the flowers. Stamp 3 branches from Leafy Accents Cling Stamp Set in Fern Green ink, color them with Leaf Green ink, cut out with coordinating die and shape with coordinating mold. Stamp branches from the Summer Wreath Accents Cling Stamp Set in Vibrant Fuchsia ink. Color them and cut it out with coordinating die.  Use dimensional adhesive and hot glue to attach all elements onto card as pictured. To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers. Add some pearls.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, self-adhesive pearls

Instructions:

Cut a piece of white card stock to 7 x 10” and score in half at 5”. Using the blue striped paper from the HCDP1-2111 Cottage Garden Paper Collection, cut a piece measuring 5 x 7” Ink the edges using the HCDA1-449 Stack and Store Daubers along with Periwinkle Archival Ink. Attach to the card front. Next using the HCD2-7424 Rectangle Filigree Frame Die, cut out 3 pieces from the largest die in this set. One from white card stock, one from Luxe Silver Cardstock, and one from a scene from the Cottage Garden Paper Pack. With Dries Clear Adhesive adhere together the white and silver outer die cuts together, slightly offsetting them to form a two layer frame. Glue the frame to the card front. From the patterned paper die cut, discard the outer layer and use the center scene to glue into the frame on the card front as shown.

Stamp the smallest flower 4x from the HCPC-3900 Cottage Garden Hydrangea Cling Stamp Set with Periwinkle ink onto Deluxe Flower Shaping Paper. Color the centers with Periwinkle and the petals with a light touch of Deep Purple Archival Ink. Then after die cutting with the coordinating die, deepen the edges with Periwinkle ink. Shape using the coordinating 3D Mold. Next stamp the branch without swirls from the HCD1-7193 Leafy Accents 2x with Leaf Green Archival Ink onto Deluxe Flower Shaping Paper. Lightly color with Vivid Chartreuse Archival Ink. After die cutting with the coordinating dies, darken the edges with Leaf Green ink before shaping with the coordinating 3D Shaping Molds. To finish the Hydrangeas, simply add a single HCS1-457-1 Pastel Pearl Stamen - Small in white. Top Tip: Cut thread stamen in half and thread through just one single side and adhere with a glue gun on the reverse side for the simple single stamen look.

To complete the card, simply arrange the leafy accents in the best way to frame the scene that was chosen from the paper pack, any scene can be used. Then attach the individual hydrangea blooms (with a glue gun) one at a time over the leafy accents clustered close together until the desired look is achieved.

For the inside of this card the second largest die from the Rectangle Filigree Frame Die set was used over desgner paper which completed the card perfectly. 

Other Products: Glue Sticks, Glue Gun, Blending Brushes, Paper Trimmer, Die Cut Machine

Instructions:

Create a 5 x 7" card base in white cardstock. Cut out a 4.5 x 6.5" piece of peach paper from the Friendship Rose Paper Collection, distress with Coastal Coral and adhere. Cut out the Decorative Heart Die in black cardstock and adhere. Cut out the center scalloped heart die with the Decorative Heart Die in peach designer paper and adhere to card front offset.

Stamp the roses from the Friendship Rose Heart Cling Stamp Set in embossing ink and heat emboss with black embossing powder, color with Zig Markers and cut out with coordinating dies, adhere on the right side of the heart with foam tape.

Stamp the roses from the Classic Rose Cling Stamp Set in Coastal Coral, sponge with Coastal Coral, Bright Tangelo and Sunflower, cut out with coordinating dies and sculpt with the 3D Rose Shaping Mold, add glitter.

Stamp the leaves from the Leafy Accents Cling Stamp Set in Olive, cut out with coordinating dies, sponge with Olive and Vibrant Fuchsia, sculpt with 3D Leafy Accents Shaping Mold.

Adhere flowers and foliage as shown.

Other Products: White and black cardstock, black embossing powder, embossing ink

Instructions:

Cut a piece of White cardstock of size 9 x 9 1/2 inches, score and fold it to create a slimline card base of 9 1/2 x 4 1/2 inches in size. From HCDP1-2145 Friendship Rose Paper Collection, cut 2 pieces with sheet 1B of size measuring 1/4th of an inch lesser in size than the card base. Adhere these pieces to the front and inside card panels. 

Using HCD1-7411 Holiday Star Die, cut 1 piece each of the large star frame with White and Gold cardstock. Cut the corners of the star, stack the gold pieces on top of the white and adhere them to the corners of the inside panel. Using the largest of the HCD3-7431 Slim Eyelet Rectangle Die to cut a piece of Gold cardstock and adhere to the front panel. Using sheet 1B again cut another panel with size 9 x 4" inches and add this to the front panel along with a piece of White cardstock slightly larger than the designer piece having a thin frame around. 

Using White and Gold cardstocks cut 1 piece each with HCD3-7433 Slim Lattice Oval Die, align the gold piece on top of white slightly off-centered and adhere this using dimensional tape to the card front. Stamp the image from HCPC-31006 Budding Rose Heart Cling Stamp Set onto White cardstock using Obsidian Black pigment ink and color using Zig brush markers. Die-cut the image using coordinating die along with few blank white pieces. Add some crystal clear glitter on the image using dries clear glue. Once dried, stack the die-cut pieces together and adhere to the center of the card front using dimensional tape.

Stamp the sentiment from HCPC-31007 Friendship Sentiments Cling Stamp Set onto White cardstock with Tiger Lily ink and cut it using small oval die along with the center decorative element from HCD3-7433 Slim Lattice Oval Die in Gold cardstock. Using dimensional tape add this element to the center of the rose frame as shown.

Finally add some White Nuvo drops around the arrangement to complete the card.

Other Products: Dimensional adhesive, funnel tray, scissors, paper trimmer, scoring board, die cutting machine, Obsidian Black pigment ink, Eyelet Hearts die set, water color brushes

Instructions:

Click HERE to view the video tutorial for this card. Click HERE to view the video for Hollyhock flower shaping tutorial .

Score a 10" x 5" piece of Deluxe Flower Shaping paper at 2 1/2" and  7 1/2". Then fold to make a 5" x 7" gatefold card base. Cut pieces of pattern paper from Hollyhock Garden Paper Collection and adhere it on the card front panels. Cut slightly smaller pieces of pattern paper from the same paper collection and adhere them on the inside of the card. 

Die cut 4 pieces each of white cardstock using the dies from Rectangle & Oval Filigree Frame dies. Adhere the same pieces together. Cut the Rectangle Filigree Frame die cut in half and adhere it on the card front as shown. Die cut a piece of pattern paper from the same paper collection using the same die and cut that in half. Adhere the resulting pieces on the card front.

Die cut the matting pieces from Hollyhock Garden Paper Collection using the dies from Eyelet Oval & Basics Large Die & Oval Filigree Frame die. Stamp the sentiment from Just For You Sentiments Cling Stamp set on the smallest oval die cut using Jet Black archival ink. Adhere all the pieces together using foam strips wherever needed. Adhere this piece only on the left flap of the card front as shown.

Stamp the flowers from Hollyhock Petals and Leaves Cling Stamp set using Carnation Red and Bright Tangelo Archival inks. Color them using Carnation Red, Bright Tangelo and Sunflower Archival inks. Stamp the leaves from the same stamp set on a piece of deluxe flower shaping paper with Leaf Green Archival ink & ink it lightly with the same ink. Die cut all the flowers & leaves using the matching dies from Hollyhock Petals and Leaves Die. Shape them using the 3D Hollyhock Shaping mold and Deluxe flower shaping kit. Poke a hole in the centers of the flowers with the pointed end of the groove golf tools and thread a pollen from Medium Assorted and Pastel Bead Stamens in each one of them and adhere with dries clear glue. Cut off the pollen stems once the glue dries.

Adhere the flowers and leaves around the sentiment using hot glue gun. Add a few pearls on the die cuts to finish off the card.

Other Products: Scissors, hot glue gun & pearls

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 8 1/2” x 9 3/4”, score at 4 1/4” along the 8 1/2” side and fold to create a base card of 4 1/4” x 9 3/4”.

Die cut the eyelet rectangle using the No. 1 die from the HCD3-7431 Slim Eyelet Rectangle Die out of gold cardstock and adhere to the front of the card.  Die cut a plain rectangle using the No. 1 die from the HCD3-7432 Slim Basic Rectangle Die, score every 1/8” along the long side and adhere to the front of the gold eyelet rectangle.

Die cut the daisy border and two daisy corner outline dies from the HCD3-7434 Delicate Daisy Corner and Border Die out gold cardstock. Die cut the daisy border and two daisy corners decorative dies using the inner and outer dies from the HCD3-7434 Delicate Daisy Corner and Border Die. Add Frosting Powder to the decorative dies using Dries Clear glue on a sponge and adhere the decorative dies over the gold outline. Adhere the border and corners to the front of the card as shown.

Stamp the leaf images from the HCPC-3887 Wild Aster Cling Stamp Set in English Ivy ink on Deluxe Flower Shaping Paper. Colour with Leaf Green ink and die cut with the coordinating die. Colour the back of the leaves with Leaf Green ink and shape using a golf tool. Add Crystal Clear glitter using clear gloss gel medium with a paint brush, trim and add around the base of the border die as shown.

Stamp the aster flower images using Maple Yellow ink on Deluxe Flower Shaping Paper.  Colour the flowers with Citrus Burst and Cotton Candy inks and die cut with the coordinating die. Colour the backs of the flowers with Citrus Burst ink and shape using a groove golf tool. Assemble flowers with two of each size and add Crystal Clear glitter using clear gloss gel medium with a paint brush.  Add Heart of Gold Prills and a gold pearl to the centres of the flowers  and then adhere over the leaves as shown.

Die cut the sentiment out of gold cardstock using the sentiment die from the HCD1-7203 Ornamental Tags Die. Die cut the backing out of Deluxe Flower Shaping Paper and adhere the sentiment to this. Adhere under the asters.

Add gold pearls to the centres of the daisies on the two corners and border dies.

Other Products: Clear gloss gel medium, paint brush, Altenew inks - Citrus Burst, Maple Yellow, Cotton Candy, Pink Fresh Studio Gold Pearls,