Instructions:

The ready card base from smooth white cardstock measures, 5 1/2″ by 8 1/2″. Choose the designer paper from Sweet Pea Paper Collection and cut to size measuring 4 3/4″ by 7 3/4″ and cut it using deckled edge paper trimmer. Glue the panel on Luxe Gold cardstock creating a sleek border of 1/16″ on all the sides. Layer the panel on the ready card base using double-sided tapes for extra dimensions. 

Cut all the required die cuts as shown from white and gold cardstock using Fancy Classic Oval Frame Die. Glue the delicate outer gold frame on a white die-cut to add extra strength and then paste it on the purple solid die cut that has been cut using outer rim from the same set and purple pattern paper from the designer paper series. Cut the center oval frame in white and paste it directly on the pattern paper in the window. Adhere gold die-cut on the back peeking through the whites, to the fancy oval frame. Layer the frame using double-sided tape.

On smooth white cardstock, stamp the images from the Vining Sweet Pea Cling Stamp Set and Classic Floral Vase Cling Stamp Set with black archival ink and paint them using Zig Clean Clear Brush Markers. Cut the images using their coordinating dies. Layer the taller vase in front of the round large vase and chop extra that's hanging out. Cut and paste an extra layer of die-cut to add extra strength to the painted images. 

Stamp a few fillers from Floral Shoppe Fillers Cling Stamp Set using Leaf green and Cactus Flower Archival ink and cut it using its coordinating die set. Sponge adhesive that dries clear on the fillers and sprinkle mixed shades of prills. Dust extras and also sprinkle some Rajni Chawla's Crystal Clear Powder and keep them for drying.

For Sweet Pea Flowers, stamp multiple petals of small and large sweet pea petals on deluxe flower shaping paper, using Pink Peony archival ink, and color them using the same ink. Highlight the petal edges using Plum archival ink. Mist the petals a little and set them in the coordinating mold and roll them through the die-cutting machine. Shape them a little more using deluxe flower shaping tools and finish the flowers by adding green stamped and painted calyx.  

The butterfly from Small Floral Butterfly Stamp set is white heat embossed on vellum. Stamp the image with versafine ink on vellum cardstock and sprinkle white heat embossing powder. Dust extras and heat set the mage. Cut the image using its coordinating die set. 

Cascading Wisterias are first stamped with Carnation Red Archival ink, cut with its coordinating die, and then color them using the same ink. Once all colored these are shaped using Deluxe Flower Shaping Kit and add glitter balls to the centers.  

Stamp 2 sets of leaves using Leafy Accent stamp and Olive Green Archival ink and cut them using its coordinating die. Color the leaves using the same inks and shape them using a deluxe flower shaping kit. Once, all the elements are ready, assemble the card as shown and complete the card by adding a sentiment from Celebrate Love Sentiments Cling Stamp Set. 

Other Products: Smooth white cardstock, Die Cutting Machine, Funnel Tray, Bone Folder, Score Board, Versafine Ink.

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 7 1/2" x 10 1/2", score at 5 1/4" and fold. Die cut the shaped base using the No. 1 die from the HCD2-7399 Flourish Companion Frame Die slightly over the edge of the fold. Die cut an outer frame using the No. 1 die from the HCD2-7399 Flourish Companion Frame Die set in Deluxe Flower Shaping Paper and adhere to the shaped base front. Die cut two frames using the No.1 and No.2 dies from the HCD2-7399 Flourish Companion Frame Die set from pattern paper and Deluxe Flower Shaping Paper. Adhere the pattern paper over the white frame and then adhere to the card front with foam tape. Stamp the sentiment from the HCPC-3845 Just For You Sentiments in Deep Purple ink using a stamp positioner and then adhere to the inside of the frame. Die cut the decorative dies from the HCD2-7399 Flourish Companion Frame Die set out of gold cardstock. Adhere the large decorative die to the outer frame and the smaller one to the inside of the frame.

Stamp the sweet pea images from the HCPC-3980 Sweet Pea Cling Stamp Set with Vivid Chartreuse and Majestic Violet inks on Deluxe Flower Shaping Paper. Colour the flowers with Buttercup ink and the centres with Leaf Green ink and die cut with the coordinating dies. Colour the edges of the purple flowers with Violet ink and colour the backs with Buttercup, Leaf Green and Violet inks. Colour the edges of the light green flowers with Magenta Hue ink and the backs with Buttercup, Leaf Green and Magenta Hue inks. Shape using the coordinating mold and then pleat the petals by hand. Pierce the centres and add three purple stamens to the purple flowers and pink stamens to the pink flowers. Assemble the flowers using hot glue.

Stamp the leaf images from the HCPC-3980 Sweet Pea Cling Stamp Set in Library Green ink on Deluxe Flower Shaping Paper. Colour the images with Leaf Green and Mowed Lawn inks and die cut with the coordinating dies. Colour the backs of the leaves with Leaf Green ink and shape using the coordinating mold. Add a small wire to the base of the leaf with hot glue

Add florist tape to the flowers and add leaves and wire tendrils to the flowers as you roll down the wires.  Add Crystal clear to the flowers and leaves, trim the ends and adhere to the right side of the card as shown. To finish add a purple organza ribbon bow at the bottom right of the card as shown.

Card Inside: Die cut a background using the No. 1 die from the HCD2-7399 Flourish Companion Frame Die out of pattern paper and adhere to the inside of the card.  Trim at the edge of the fold to allow the card to fold easily.

Other Products: Ranger Archival ink - Violet, Distress ink - Mowed Lawn, fine green florist wire, clear glossy gel medium, foam squares, hot glue gun, green florist tape, purple organza ribbon, foam tape, stamp positioner

Instructions:

The background of this 12 x 12" layout is patterned paper from the Sweet Pea Paper Collection sheet10B. Cut a piece of the pink patterned paper that is 6.5 x 9" and adhere to the right hand side of the layout. Cut a piece of the striped patterned paper that is 3 x 12", and mat in white cardstock using a scalloped border cutter. Adhere this matted border in the middle of the pink patterned paper piece. Cut a smaller piece of striped patterned paper that is 2.25 x 6" and tear the bottom edge. Adhere to the top left hand corner. Cut a smaller piece of pink patterned paper that is 1 x 6" and tear the bottom edge of that also. Adhere one top of the other piece of striped patterned paper. 

Stamp and die cut 2 of the small narrow vases using an embossing pad and gold embossing powder. Adhere these to the top and bottom of the wide border. Die cut the middle oval die cut piece from white and Luxe Gold Cardstock. Adhere the white cardstock piece to the gold slightly off set. Adhere to the top left hand corner of the layout and snip off the over-hang.

Using the Simply Classic Oval Frame Die, cut the largest die from white cardstock, the next largest from Luxe Gold Cardstock, the next largest from white cardstock, and using the plain oval die to cut your photograph. Adhere the top 3 layers together, then adhere to the base piece using foam tape. Adhere the whole piece to the wide border using foam tape. Die cut 4 of the decorative corner die from Luxe Gold Cardstock. Adhere to the large pink patterned paper piece using liquid adhesive. 

Stamp and die cut 2 of each using brown ink (Staz On- Timber Brown) onto Deluxe Flower Shaping Paper: Vining Sweet Pea, Small and Large Sweet Pea flower, both sizes of leaves, 5 petaled flowers. Add color to the larger flowers using pink ink (Archival- Rose Madder) and daubers. Add color to the leaves using green ink (Archival- Olive) and daubers. I added color to the smaller vines and flowers using the same inks with a water brush and Zig Clean Color Markers (Deep Green, Light Carmine). Shape the flowers and leaves using Shaping Tools and the coordinating 3D Shaping Molds.

Assemble the flowers, and add Prills to the middle of the 5 petaled flowers using a liquid adhesive. Add the 5 petaled flowers to the vase border. Add the flowers to the right and left hand side of the matted photo with some cheesecloth. Add the larger leaves around these flowers also. Add the Vining Sweet Pea images to the left and right of the flower clusters.

Cut out the small journal black and add the hand written title using a black pen. Adhere to the bottom left hand corner of the layout.

Other Products: Cardstock- White, Embossing Pad, Gold Embossing Powder, Cheesecloth, Waterbrush, Scrapbook Adhesives by 3L (Crafty Foam Tape, E-Z Runner Ultra, Adhesive Dots Micro, Dual Tip Glue Pen, 3D Foam Squares, Adhesive Dots Medium)

Instructions:

This is card measures 7 7/8“ x 6 3/8“ when completed. Taking the white card stock make a tent fold card to the completed measurements. Taking the sheet 6A from the paper collection and cut this to 6“ x 7 1/2“. Make the script imprint in the paper by using the embossing folder. To enhance the script, lightly brush over the surface using the inking brush and red geranium ink. Adhere this to the card base by using the 3D double sided foam tape.

Stamp the vase by using the lager vase in the classic floral vase set, white card stock, versa-mark, gold embossing powder and the heat it tool. Bring colour to the vase by using the ink brush and the red geranium ink. Use the flower shaping tools to bring a rounded shape to the vase. Apply 3 D foam dots or scrap card board to support the rounded shape when adhered to the card front. Adhere the vase to the card front, 3  1 / 2 “ from the top of the card.

Make the lace frame by using the die from the classic floral frame die set and the white card stock. Colour the lace frame with the inking brush and the red geranium ink. Adhere to the vase on the card.

Make the sentiment by stamping the sentiment from the classic floral vase stamp set with sepia ink onto white card stock. Using the circle die that the sentiment fits into from the small circle die set then die cut. Sprinkle a little gold embossing powder around the edges of the circle, secure the powder by using the heat it tool and apply the heat from under the circle so the powder will not get blowen away. Hold the circle by using the tweezers so you won't get burnt from the heat. Adhere the sentiment to the lacy frame with 3D foam dot or scrap cardboard.

Make the sweet pea vines by stamping on white card stock with sepia ink, three large and one small sized images from the vining sweet pea stamp set. Die cut these with the matching die set after they have been coloured with the soft red, lagoon, bright green and cypress aqua pencils. Bring shape to the image by using the deluxe flower shaping tools. Sprinkle a little gold embossing powder on each flower then secure the powder as was done with the sentiment circle. Adhere the vining sweet peas in place as shown. To finish, apply the diamond stickles to the leaves.

Other Products: Inks: Spectrum Noir Aqua Pencils: Soft Red, Lagoon, Bright Green, Cypress. Other: Inking brush, 3D double sided foam tape, Misti stamping tool, Diamond stickles, SUP embossing folder- Scripty, Tweezers, Inking brush, VersaMark ink pad, Scrap cardboard.

Instructions:

Create base using outside die Fancy Classic Rectangle Frame Die cut two pieces from white cardstock, glue it together on the top, cover with designer paper. Using decorative frame die, cut from silver paper and place into card using Foam Strips for dimension. Cut smaller frame from paper collection and silver paper and adhere to the front of the shaped card using  Adhesive Foam Strips for dimension.

To create Sweet Pea flowers, stamp Sweet Pea Cling Stamp on white paper with Ranger Archival Ink Pad - Red Geranium and cut using the coordinating dies. You will need 2 petals of each to create flowers, for bigger flower use the biggest stamp, for smaller flower use smaller size stamp. Colour the flowers with Ranger Archival Ink Pad - Red Geranium using a sponge dauber. After colouring, place the flowers into the mold and run through cutting/embossing machine. Pierce the center and glue in some stamens using hot glue gun. Add a little hot glue to the underside of the flower. Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

To create leaves, Sweet Pea Cling Stamp on the white paper with Ranger Archival Ink Pad - Leaf Green, cut out with the coordinating die, shade using this same ink and shape. Sponge the leaves with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Stamp sentiment using Classic Floral Vase Cling Stamp Set on the piece of paper collection with Ranger Archival Ink Pad - Jet Black and place onto the card using adhesive foam strips. 

Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine

Instructions:

Cut a 6” x 6” base out of white paper. Then, from the paper collection, cut a square a little smaller than the base and glue it to the base. Then, cut 5.25" x 5.25" square from white paper and glue to the base. From the paper collection, cut a square a little smaller. Adhere as shown  with Double Dots 100pc. -3D Foam Circles. Use brown ink to stamp the sentiment from the same set.

From white paper, cut a frame from the Classic Floral Vase Die set, then cut it in half and glue it as shown on both sides of the card front.

On white paper, stamp a branch from the Vining Sweet Pea set with green ink and color it with green and pink ink. Cut with a suitable die. Cut another twig out of the white paper. adhere it under the colored twig so that it sticks out a little. Cover everything with glue and glitter.

Glue everything as shown.

Other Products: Die-cutting machine

Instructions:

Using the largest booklet frames die create a shaped card by diecutting a 6.5 x 4” card base – place the die over the side fold. Die cut again using single white card and paper from the Delightful Daffodil collection, layer these onto the card base.

Die cut the 2nd largest booklet frame using paper from the collection and adhere to a black die cut of the middle size decorative booklet frames die, add this to the card base using foam pads.

Die cut the Ironworks thank you in black card and add to a die cut of the background in contrasting paper from the collection, adhere this to a white card die cut of the background shape and add to the card base as shown using foam pads.

Stamp the holly berry sprays using olive grove ink on paper from the collection, die cut and snip away the holy leaves. Shape using the flower shaping tools and adhere to the card base using dries clear adhesive.

Make the flowers: Stamp in peanut brittle ink onto flower shaping paper, colour the centres using daubers/ peanut brittle ink then die cut. Add teal zeal ink to the petals and back of the flowers then shape using the golf tools.

Add flowers and trimmed holly sprays to the card base using hot glue then add a small drop of sugared almond nuvo into the centre of each flower and a few smaller dots over the back of the design - sprinkle over the crystal clear glitter, remove excess and allow to dry.

Other Products: White card base 6.5" x 4", foam pads

Instructions:

Create a shaped card with Simple Centerpiece. Cut a piece of white cardstock 6 1/2 x 6 1/2”. Lay onto the cutting plate overhanging the top horizontal blade and die-cut. Use ScorPal to score a line where the top blade would have been (this will give you a tab when trimmed with scissors).

Die-cut a full Simple Centerpiece in white cardstock add Dries Clear to the tab and adhere the full die-cut to the tab to give you a top hung shaped card.

Line the front of the card with Floral Frames Paper Collection 5B edged in Forget me Not. Adhere over 5A, the edges will be hidden by the Elegant Hearts Centerpiece aperture.

Die-cut Elegant Hearts Centerpiece in white and Luxe Gold Cardstock removing the centre to create an aperture. Use Dries Clear to adhere Luxe Gold Cardstock behind the white giving a slight shadow. Adhere on 3D foam strip onto the card.

Die-cut using Ticket and Tags from Floral Frame 12A, stamp ‘With All My Love’ from the For My Friend Sentiments (mask off the other words) in versamark and gold heat emboss. Adhere onto the frame with hot glue secured with ribbon bow.

Stamp in Olive Leafy Accents onto Deluxe Flower Shaping Paper, colour with Leaf Green, die-cut, colour the back. Place in 3D Leafy Accents Shaping Mold, spritz and run through the die-cutting machine.

Stamp in Leaf Green Dazzling Dahlia leaves, colour with Vivid Chartreuse, die-cut, colour the edges and backs in Leaf Green. Lay in 3D Dahlia Shaping Mold, spritz and run through the die-cutting machine.

Stamp in versamark onto Deluxe Flower Shaping paper and gold heat emboss both sizes of Dazzling Dahlia. Colour with Pink Peony and Sky Blue overlapping the colour. Layer up the petals with hot glue shaping with Deluxe Flower Shaping Kit. The last smaller petal at the centre, Thread Pastel Bead Stamens, secure with hot glue trimming off excess wire. Add to the centre of the dahlia with hot glue.

Add dries clear adhesive  to sponge and apply crystal clear glitter.

Other Products: Paper trimmer, scissors, hot glue, VersaMark, ribbon

Instructions:

Die-cut Rectangle & Basics two largest dies to mat and layer Floral Banners Collection paper sheet 4B edged in Pink Peony onto 9B edged in Leaf Green onto a 5 x 7” card blank. Die-cut Intricate Swirl Frame rectangles in white cardstock to create a frame.

Cut white cardstock approximately 3 1/2 x 5 1/2” lay both cut-in dies from Classic Companion Border and tape in place. Run through the die-cut machine. Adhere behind the Intricate Swirl Frame. Add 3D foam strips doubled up to the back of the frame and adhere to the card.

Stamp Leafy Accents and leaves from Classic Rose in Olive onto Deluxe Flower Shaping Paper and colour with Vivid Chartreuse, die-cut and colour the back and centres of the leaves with Olive. Add to the 3D Leafy Accents and 3D Rose Shaping Molds spritz with water and run through the die-cutting machine. Use Dries Clear adhesive and sponge to dab onto the leaves and add Crystal Clear glitter.

Onto a glass mat smoosh Distress Oxides Spun Sugar, Milled Lavender, Tattered Rose spritz with water and pick up the colour onto a sheet of Deluxe Flower Shaping Paper front and back. When the paper has completely dried stamp Classic Rose in Pink Peony and die-cut. Add to the 3D Rose Shaping Mold, spritz and run through the die-cutting machine.

Use hot glue to secure the petals together. Start with 2 of the smaller petals rolling around the Golf Tool to form cone shapes. Bring the petals together around the cone. Add another 2 or 3 petals of the next size up off-setting the petals and repeat with the next size up or as many times to make larger or smaller roses. Add a green petal around the base of the buds stamped in Olive onto Deluxe Flower Shaping Paper, coloured with Leaf Green and Fern Green, shaped with Deluxe Flower Shaping Kit.

Pierce the single smallest rose petals and thread Bridal Bouquet Stamen securing at the back with hot glue. Trim off excess cord.

Adhere each larger rose onto Classic Rose leaves. Adhere Leafy Accents with hot glue onto the Intricate Swirl Frame.

Adhere ribbon loops with hot glue prior to adhering roses.

Die-cut an Ornamental Tag from Floral Banners Paper 12A and adhere with dot.

Other Products: Paper trimmer, scissors, ribbon, hot glue, distress oxides: Milled Lavender, Tattered Rose, Spun Sugar

Instructions:

Other Products: Smooth White Cardstock, Neenah Solar White Cardstock, Copic Markers, Sequins

Instructions:

My finished card size is 3 3/4" x 7". Make card base and set aside while we work on the elements.

Cut a piece of white cardstock 3 1/2" x 6 3/4". Use one of the oval dies and cut an opening in the cardstock. I just eye balled this. I used the embossing folder at this point and set it aside. Using green cardstock cut a piece about 3 1/4" X 6" and cut a smaller oval in it. Position the green piece behind the white embossed piece making sure it is even in the opening and glue down. I chose a piece of the paper collection and cut a piece to lay behind the opening. Glue this down. Wrap a piece of ribbon around the bottom of the card panel and use Scor-Tape to adhere to the back of the panel. Cut out one of the tags from the paper collection and using dimensional tape, adhere to the panel over the ribbon. Glue this panel to the card front.

Now we are going to work on the flowers. Stamp the flowers onto Deluxe Flower Shaping Paper using Magenta Hue ink. Color these petals with Magenta Hue as well. Use coordinating dies to cut out the flower petals. Stamp the leaves using Fern Green and color with Leaf Green ink. Cut out using coordinating dies. Edge the leaves with Olive ink to give dimension to them. I used Stack and Store Daubers to add color to the flowers and leaves. Shape the leaves a bit using the Deluxe Flower Shaping Kit and then brush on Glossy Accents and set aside to dry. Shape the flowers using the Deluxe Flower Shaping kit and then hot glue two petals together being careful to offset the petals. Add the Lemon Chiffon Prills to the centers of the flowers and set aside to dry. Once dry, use Hydra Sponges and Dries Clear Adhesive to add glitter to the flower petals and then set aside to dry.

Once everything is dry decide on placement and hot glue to the card front.

Other Products: Embossing Folder, White Cardstock, Green Cardstock, Green Ribbon, Die Cut Machine, Scor-Tape, Dimensional Tape, Hot Glue Gun, Ranger Glossy Accents

Instructions:

Fold white cardstock to 6 x 5.5" with fold on the top then use the outline die from the Fancy Classic Oval Frame Die to cut, leaving the top of the die over-hanging fold by about 1". Use the same die and cut out the full front from the purple sheet of the Sweet Pea Paper Collection. Using the same die set, cut from white cardstock and pink designer paper as shown leaving an aperture in the center. Cut out a white gate with the Palace Gateway Die. Use dimensional adhesive and glue all of them. Stamp the sentiment in Leaf Green ink using the Celebrate Love Sentiments stamp and cut it out.

Stamp blossoms from Sweet Magnolia Blooms Cling Stamp Set in Cactus Flower ink onto Deluxe Flower Shaping Paper, color their edges and centers with the same ink, diecut with coordinating die and shape with mold. Add stamens to all flowers. Stamp flowers from Lush Lilac Cling Stamp Set in Cactus Flower and Leaf Green inks onto Deluxe Flower Shaping paper and diecut with coordinating dies. Shape them with Deluxe Flower Shaping Kit tools. Put some prills in the center of the flowers. Stamp 3 branches from Leafy Accents Cling Stamp Set in Leaf Green ink, color them, cut out with coordinating die and shape with coordinating mold. Stamp branches from Sweet Magnolia Buds in Frost White ink onto Vellum paper, use Opaque Embossing Powder, then heat emboss them and diecut with coordinating die. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, sissal, self-adhesive crystals

Instructions:

Create a card base from Deluxe Flower Shaping card stock. Cut a card piece measuring 7” x 10 “ and score at 5” on the long side. Fold to make a horizontal card base.

Cut a piece of floral background paper 7 1/4" x 4 3/4" from the Sweet Pea paper collection and adhere on the card front using designer dries clear glue.

Cut two die cuts from the Flourish companion Frame die using the outer large decorative die piece in white card stock and luxe gold card stock. Adhere the white die cut behind gold die cut off setting a little. Cut another piece using the outer most die and pink background paper to get the backing layer for the frame die cut.  Adhere the frame die cut on the card front. Cut the inner part of the frame using a pink colour paper and adhere the whole set on the card front.

Stamp the Vining Sweet Pea image in cactus flower ink on Deluxe flower shaping paper. Color with Zig markers and cut with coordinating die. Stamp two images of the long vase with Jet black ink and colour with Zig markers . Cut with matching die. Shape them a little and add foam tape on the back. Adhere on the card as shown.

Stamp the Sweet pea flower image for both small and big flower using Majestic violet Archival ink on Deluxe flower shaping paper. Colour with a blend of the violet ink and vibrant fuschia ink. Shape the flowers in the 3D flower shaping mold for sweet pea. Gather the 3 petals for small flower together. Add a purple stamen in the centre and glue together. Add this on the two petals. Make similar big flowers.

Stamp the sepal flowers in Library Green ink and color with Leaf Green ink. Shape in the 3D flower shaping mold. Add this at the back of the flowers. Make leaves using Library Green ink and Leaf green ink.

Arrange the  stamped vining flowers image and the sweet pea flowers and leaves on the card.

Use the eyelet circle die to get a white and a mat gold die cut. Stamp the sentiment on the smaller white circle. Adhere to the card.

Other Products: Die cutting machine, scoring board. hot glue gun

Instructions:

Card size: 5 x 7”. Die cut the card base using Fancy Classic Oval Frame outer die. Die cut another front from white cardstock (because when making shaped cards you cannot make full shape in order to keep the fold). Cut another front from decorative paper. Cut the next size in with another decorative paper that coordinates. Cut the inner oval from first color decorative paper also cut a piece of foam sheet to fit oval. Glue the first 2 layers onto card.

From Silver cut all the decorative dies in the Fancy Classic Oval Frames set. Glue the thin silver frame where the lavender meets the aqua, glue the next silver die cut centered on front. The oval decorative die goes on the lavender oval, also glue the foam sheet to fit under the paper, now glue the oval stack onto center on card.

Stamp the sentiment using Majestic Violet on white, die cut with a small oval then sponge the edges with LuLu Lavender (or other light lavender). Cut a mat from silver 1/8” larger using large oval set then cut a foam sheet to fit. Glue oval sentiment stack together then glue to the center of card.

Stamp smaller Sweet Pea using Majestic Violet, sponge with violet and Magenta Hue. Stamp leaves, sepals and vine using Fern Green, sponge with flower colors and Leaf Green. Die cut and shape in the Flower Mold (See video). Shape vines with groove tools or Deluxe Flower Shaping Kit from the back, curl the spindly vines around a stylist or Groove Tool. Flowers are 2-part, glue the 2 parts together in the center and fold upward with fingers, add a dot of Nuvo Crushed Grape to the center of each. Glue the sepals to the bottoms. Make buds using 1 part of flower by rolling petals then gluing sepal onto bottom. Make several spindly vines using green wire wrapped around a stylist or Groove Tool.

Use hot glue to glue arrangement onto card front around sentiment. Add wire vines as desired to finish arrangement. Glitter all the flowers and buds. Mix shimmer and lacquer together then paint onto leaves with an old flat paintbrush. Stipple glue onto card front then add glitter (Try to avoid silver). Your card is finished.

Other Products: White cardstock, foam sheet, green wire, shimmer additive

Instructions:

Create a 6 x 6" card base with white cardstock. Cut a 5.5 x 5.5" piece of purple designer paper from the Sweet Pea Paper Collection, distress with Iris and adhere. Cut a 5 x 5" piece of patterned designer paper and adhere.

Cut out the small doily from the Classic Floral Vase Die in white card stock and adhere to top right corner.

Stamp with the sentiment from the Classic Floral Vase Cling Stamp Set in Jet Black on a tag from the paper collection and cut out, distress with Iris.

Stamp the Sweet Pea Cling Stamp Set in Vibrant Violet, sponge with the Vivid Chartreuse and Vibrant Violet, cut out with coordinating dies, sculpt with the Sweet Pea Shaping Mold and add glitter. Stamp the vase with the Classic Floral Vase Cling Stamp Set in Vibrant Fuchsia, cut out with coordinating dies and sponge with the same and sculpt with a stylus.

Stamp the vines with the Vining Sweet Pea Cling Stamp Set and the Sweet Pea leaves in Olive and sponge with Pink Peony, Vivid Chartreuse and Olive, cut out with coordinating dies, sculpt the leaves with the mold and the vines with stylus and add glitter.

Adhere vase and tag with foam tape, adhere seam binding bow. Adhere flowers and vines as shown.

Other Products: White cardstock, foam tape, Stazon Ink Pad - Iris, seam binding ribbon

Instructions:

This top fold card measures 6 3/4 inches by 4 3/4 inches. To create a card base - cut out a 9 1/2” x 6 3/4” piece of white cardstock and score it at 4 3/4” (long side up). Fold using a bone folder along the score line. In Wild aster paper cut a 4 1/2 x 6 1/2" pink paper, a 4 1/4 x 6 1/4" white paper and a 4 x 6" light pink paper. Glue them on card base.

Make the Wild aster flowers. Stamp using Fuchsia Pink ink onto flower shaping paper, colour the centre with sunflower and shade the rest of the flower using the same pink. Diecut with the coordinating die. Spritz with water and give further shape with Deluxe flower shaping kit tools. Put white prills in in the centre of the small flowers with hot glue. Made 1 big flower, 1 medium, 1 small flowers. Also stamp, color and cut 3 leaves from the same collection.

Also stamp with olive ink and cut flowers from the Wild aster scroll and cluster. Coloring with Fuchsia Pink ink, olive ink and zig markers.

Die cut your sentiment from HCD2-7338 die, one white and one in fuchsia paper and glue them on each other. Glue it on the card.  Put cheesecloth on your card and make a flower and leaves arrangement to the left of your sentiment. For the final touch, add spring kraft wire string.

Other Products: Diecutting machine, water mister, scissors, hot glue gun, cheesecloth,

Instructions:

From a sheet of HCPP1-475 Deluxe Flower Shaping Paper Pack of 50 - White, cut out a 4.25" x 12" rectangle. Fold in half to make a base. Cut a 4" x 5.5" rectangle from the 5A Sweet Magnolia Paper Collection. Glue to the base.
From a silver sheet of paper and paper with a linen texture, cut a 2x decorative border from the HCD1-7211 Decorative Pocket Accents Die set. Apply on top of each other with a slight offset and adhere in the center as shown with a little glue.

On an A4 sheet of paper intended for the printer, stamp the border from the Floral Mosaics set 2x using Pebble Beach ink. Cut with a matching die. Cut to size and adhere with  a little glue in the center.

From the Luxe Gold cardstock, cut a frame from the HCD2-7309 Elaborate Oval Frames Die set. Glue in the central part. 

Stamp the sentiment from the HCPC-3842 Celebrate Love Sentiments set on the white cardstock using the Light House color, cut out a small oval frame using the Elaborate Oval Frames set, add rounded 3D dots and place on the golden element.

Stamp Asters and leaves from HCPC-3887 Wild Aster Cling Stamp Set and fine leaves from HCPC-3939 Cottage Tree 'scapes Cling Stamp Set onto a sheet of Deluxe Flower paper. Cut with matching dies. Paint the flowers with watercolor paints in shades of pink and apply Vivid chatreuse and Bamboo leaves on the leaves with a dauber. Shape the flowers with your golf tool. Glue 4 petals together.

Arrange the composition and adhere to the indicated place. (At the bottom, adhere the 3 leaves of the asters, arrange the flowers on them. In between, put a small leaf Cottage Tree 'scapes, divided into 4 parts.) Put a little glue in the middle of the flowers and sprinkle them with prills. Finally, complete the composition with golden Nuvo drops in the indicated places and it's ready!

Other Products: Cutting machine, paper trimmer, watercolor paints, brush, sheet of paper intended for the printer, sheet of paper with a linen texture

Instructions:

Prepare a white card base 5 x 7". Lay a piece of Sweet Pea paper (sheet 6B) on top. Cut a piece of white card stock using the 2nd die from the Filigree Companion Frame set on top of that.

Stamp the Vining Clematis Banner on white with Deep Purple and color in with Lulu Lavender. Cut out with the coordinating die and adhere to the gold back ground from the same set. Add foam dots to the back and adhere to the center of the card.

Use the Letters and Numbers die and cut out the letters to spell For You, adhere to the center of the stamped Clematis banner as shown.

Stamp the flowers on white with the Deep Purple, color with the Lulu Lavender, cut out with the coordinating die, place in the matching mold and run through the die cut machine to shape. Adhere to the card.

Stamp the leaves from the Large Floral Urn set on white with the Emerald Green ink, color with the Bamboo Leaves, cut out with the coordinating die, use the Deluxe Flower Shaping tool to shape. Adhere to the card.

To finish add white pearls to the center of each flower and glitter to all leaves and flowers.

Other Products: Paper Trimmer, Die cut machine, Small white pearls

Instructions:

Card size is 6 x 6”. Score and fold 12 x 6” Deluxe Flower Shaping Paper at 6” on the long side to create card base. Cut a 5 7/8 x 5 7/8 piece of white cardstock and ink the edges using Deep Purple ink. Cut a 6 x 6” panel from the Sweet Pea Paper Collection sheet 11A, trim to 5 3/4 x 5 3/4” and adhere to the previous mat layer. Adhere the two to the card front using dries clear adhesive. Cut another 6” panel from sheet 11A, trim to 5 7/8 x 5 7/8”, ink the edges, stamp the ‘Hope your day is as Special as you are’ sentiment from the Special Birthday Sentiments Cling Stamp set using Deep Purple ink and adhere to the inside of the card using dries clear adhesive.

Using the Classic Floral Vase Die, cut the decorative die from white cardstock x3. Cut one in half, save the one half for another project, then adhere the two whole and one half diecuts together. Sponge with dries clear adhesive and sprinkle with Rajni Chawla’s Crystal Clear Glitter. Adhere to the card front using dries clear adhesive as shown.

Stamp the Sweet Pea flowers and leaves on Deluxe Flower Shaping Paper using Deep Purple and Leaf Green inks, color the centers of the flowers with the Deep Purple and color the leaves with the Leaf Green. Stamp and color the calyx using Leaf Green. Diecut all using the coordinating dies, add more color to all the edges and color the backs of the flowers and leaves. Place the flower petals, the leaves and the calyx in the 3D Sweet Pea Mold face down, spritz with water and run through the diecutting machine to shape. Add a little additional shaping using the Deluxe Flower shaping kit. Adhere the three petals to the top of the two petals and the calyx to the bottom to create flowers. Create one large and two small flowers and one large and two small leaves. Sponge with dries clear adhesive and sprinkle with Rajni Chawla’s Crystal Clear glitter. Adhere the flowers and leaves on the decorative diecuts using hot glue.

Make a multiloop bow from satin cord and adhere under the large sweet pea flower. Add some sparkle to the card front and the inside by randomly dabbing with dries clear adhesive and sprinkling with Crystal Ultrafine Transparent glitter.

Other Products: White Cardstock, Diecutting Machine, Paper Trimmer, Misti, Hot Glue Gun, Satin Cord, Funnel Tray

Instructions:

The finished card measures 6 inches by 6 inches. Take a 6 x 6" swing fold card white HCCB1-482. Cut a 6 x 6 blue paper #9B, glue it inside the card. All around the square make drops with nuvo crystal white. With the rounded lattice window die, cut a square in green paper #10B and glue it on the round white base. With the same die and the rounded sunlight window die, cut a white border in deluxe flower shaping paper and glue it on the green circle.  Add nuvo crystal drops (dandelion yellow) all around the circle.

Use the stamp in the Elegant mosaic kit. Stamp the first one with colorbox archival frost white and heat emboss with embossing powder blue. Die cut with the coordinating die. Do the same thing with the 3 other stamps in the same kit with yellow, blue and yellow embossing powder. Color the details with zig markers and glue them on each other with 3D foam. Add 3D lacquer in the center of the smaller mosaic flower after coloring it with the orange zig marker. Color the detail with the zig markers and add 3D lacquer on the dots you colored.

In blue paper #9B cut letters from the die Letters and Numbers Die. Add it to a tag from the Tickets and tag colored in sunflower archival ink.  Add 3D lacquer on the letters.  Glue it under your mosaic.

On deluxe flower shaping paper, stamp with archival manganese blue and die cut flowers from the French Cottage collection.  Add nuvo crystal drop dandelion yellow in the center. Stamp leaves from Summer Wreath accent and emboss it. Color with orange zig marker. Also stamp and color in light green other leaves. Glue on each side of your sentiment.

Other Products: Diecutting machine, water mister, scissors, hot glue gun, embossing powder: top boss red, wow primary lemon, wow primary lagoon