Other Products: Other Products: white card stock, BigShot die cutting machine, scissor, paper trimmer, water, mist bottle, dimensional foam tape, gold card stock, heat tool

For more tips on creating with the Burst of Spring collection, watch the tutorial at https://youtu.be/_8WJPTKIUlQ.

Instructions: Create a tent fold card base from white card stock using the 4.0" x 5.25" rectangle from the Eyelet Rectangle and Basics Die. Next, die cut the Diamonds and Lace Die also from white card stock. Adhere it to card base. Ink all edges using a combination of Ranger Archival Ink - Coffee and gold ink to give an aged appearance.

Choose the size eyelet diamond die you wish to use for sentiment background. Die cut from gold card stock and set aside. Locate coordinating sized diamond die within the Diamond Basics Die and die cut from white card stock. Using Ranger Archival Ink - Jet Black, stamp sentiment from Cheerful Note Sentiments Cling Stamp Set. Ink all edges using same color combination used on card base. Sprinkle Embossing Enamel - Aged Ivory lightly using finger tips to areas on sentiment diamond you wish to add some antiqued texture. Working from the backside of the diamond shape (as to not blow embossing enamel off of die cut), melt embossing enamel with heat tool. Adhere sentiment diamond shape to gold eyelet die cut. Using dimensional foam tape, adhere to card base. Repeat same embossing enamel technique to various spots on card base.

Stamp one inking of each of the opposing pansy sprays from the Delicate Pansy Spray Cling Stamp Set onto white card stock using Ranger Archival Ink - Jet Black. Stamp one inking of each size of pansy petals and foliage illustrations from the Cheery Pansy Cling Stamp Set. Using Stack and Store Daubers, color all pansy centers using Ranger Archival Ink - Sunflowers, Ranger Archival Ink - Forget-Me-Not around centers, and Ranger Archival Ink - Deep Purple on petal tips, working the blue and purple colors into one another. Using Stack and Store Daubers, color all foliage with Ranger Archival Ink - Olive. Die cut all stamped images using coordinating dies. Using Stack and Store Dauber, apply a hint of Ranger Archival Ink - Coffee to all petal pieces and pansy sprays to give them a vintage feel.

Using 3D Pansy Shaping Mold, shape one large, one mid-sized, and one small pansy, along with both sizes of foliage. Assemble following video link above. Shape pansy sprays slightly using Deluxe Flower Shaping Kit.

Adhere one pansy spray to top corner of card base as shown, and the other spray to opposite bottom corner. Adhere the large foliage and large dimensional pansy to top floral spray. Adhere mid and small sized dimensional pansies, along with smaller foliage to bottom floral spray.

Using a fine metal glue tip and Dries Clear Adhesive, apply Crystal Ultrafine Transparent Glitter to all pansies and foliage, and prills to pansy centers.

Other Products: White acrylic paint, sandpaper, gold faux metal corners, natural wood frame, yellow cardstock, white cardstock, purple color pencils, Copic: V01, V12, V15, BV00, BV02, YG11, YG41, Clear Sparkle Nuvo, floral wire or leftover stamen wire.

For more tips on creating with the Burst of Spring collection, watch the tutorial at https://youtu.be/_8WJPTKIUlQ.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Frame size: 7 1/2 x 5 1/2", it holds a 4 x 6" photo. Start with a natural wood color frame and paint it white with spray acrylic paint. Let it dry well then sand it to leave a distressed look. Spray paint 4 filigree corners made of metal or plastic (the ones here were plastic, gold that looked like metal). Glue the corners to the frame.

Stamp several small and medium sized pansies using Majestic Violet and Deep Purple. Stamp 1 large pansy with Deep Purple. Stamp 3 Delicate Pansy Spray using Leaf Green, sponge with Vivid Chartreuse. Sponge pansies with Buttercup and Deep Purple or Majestic Violet. I used a colored pencil to add the dark ring on each pansy. Die cut Sprays and Pansies then run Pansies through the die cutting machine in the shaping mold. Stamp the Floral Fashionista blooms on yellow cardstock and run through with their shaping mold. Put pansies together and then add glitter to petals, also add glitter to the small flowers on the Pansy Sprays. Squeeze dots of Nuvo to the baby's breathe on the sprays. When dry add gold Prills to the centers. Add Prills to the centers of Floral Fashionista blooms.

Cut the flourishes off the sprays and use them where needed including on the right top corner. Glue 1 spray (center part) in bottom left corner, glue flourishes up left side and right of the corner. Glue the large pansy in left corner and the rest of the pansies arranged up the left side, right bottom and 1 at the top right. Glue petite Floral Fashionista blossoms here and there. Dot glue onto frame and add white Prills to glue.

Take wires from stamen (or other floral wire) color it green then curl it around a Groove Golf Tool to make spirals. Insert them wherever desired.

Other Products: Cuttlebug Anna Griffin Juliet Damask Embossing Folder, Spellbinders Tan Embossing Mat, Gansai Tambi Watercolors, Koi WaterBrush, watercolor cardstock and pearls

For more tips on creating with the Burst of Spring collection, watch the tutorial at https://youtu.be/_8WJPTKIUlQ.

Instructions: Cut a piece of 4 1/2" x 6 1/2" pattern paper from Burst of Spring Paper Collection and adhere it on a slightly larger piece of white cardstock. Adhere this piece on a 5" x 7" white card base using Darice Adhesive Foam Strips.

Die cut a piece of white cardstock using the detailed and outline dies from Decorative Medallion Die. Die cut a piece of pattern paper from the Burst of Spring Paper Collection using the same outline die from the above die set. Stack and adhere all the 3 pieces together and adhere the final piece on the card base using Darice Adhesive Foam Strips.

Die cut a piece of white cardstock with the eyelet die from Eyelet Circle and Basics Small Dies. Open the Cuttlebug Anna Griffin Juliet Damask Embossing Folder and put the eyelet circle die cut face down on one side of the embossing folder without taking it out of the die and put the Spellbinders Tan Embossing Mat on top then run it through the die cutting machine to emboss the design on the die cut. Then adhere it to the card base as shown using Darice Adhesive Foam Strips.

Die cut a piece of white cardstock using the doily die from Butterfly Kisses Decorative Die and adhere it to the eyelet circle die cut slightly offsetting it to the bottom left using Darice Adhesive Foam Strips.

Die cut 4 pieces of white cardstock using the thank you die from Butterfly Kisses Decorative Die and ink one of them using Deep Purple Archival Ink. Stack and adhere them all together and glue the final piece on the doily die cut.

Stamp the image from Delicate Pansy Spray Cling Stamp Set on a piece of watercolor cardstock with Jet Black Archival Ink Pad. Color it using Gansai Tambi watercolors and die cut using the matching die from Delicate Pansy Spray Die. Adhere it on the card front as shown using Darice Adhesive Foam Strips. Add pearls to the die cuts for finishing touch.

Other Products: Seedless preserve distress ink, blending foam applicator, die cutting machine. White 270 gsm card stock,

For more tips on creating with the Burst of Spring collection, watch the tutorial at https://youtu.be/_8WJPTKIUlQ.

Instructions: The finished card size measures 7 inches by 5 inches. To make the card base, cut white card in 10 inches by 7 inches and score at 5 inches mark on the longer side. Fold to make a card base. Distress the edges of the card base with Distress ink.

Cut a 6 3/4 inches by 4 3/4 inches pattern paper design from the paper collection and adhere to card front using clear glue.

Cut two pieces of die cuts from Petite pockets die set. Adhere the two together with glue as shown. Cut a pattern paper 4 3/4 inches by 5 1/2inches. Distress the edges with Distress ink. Adhere the die cuts to this as shown. Adhere the whole piece on the card front with foam tape.

Stamp the Pansy frame image on white card stock. Colour with Zig markers and cut with coordinating die. Cut the small lattice die cut from Lacy Diamond die and adhere to the centre of pansy frame. Cut an A2 card frame from pattern paper. Add the lace die cut on top from the Decorative die set. Adhere the Pansy frame on this panel and adhere to the card.

Stamp the pansy flower image with majestic violet ink and Vibrant Fuchsia ink on white card stock and colour the flowers with archival ink. Mold the flowers in the pansy mold and give further shape with groove golf tools. Add the flowers and leaves to the pansy frame

Cut a small diamond diecut. Cut a sentiment from pattern paper and add to the card to finish it.

Other Products: Diecutting Machine, Hot Glue Gun

For more tips on creating with the Burst of Spring collection, watch the tutorial at https://youtu.be/_8WJPTKIUlQ.

Instructions: Take a Burst of Spring Paper Collection and a white cardstock, using the larger tag die from Album Tags and Accents Die, cut the white cardstock and paper from the collection and adhere together using dries clear glue. Using the smaller size tag, cut one piece from paper collection and diecut the bottom using die from Album Tags and Accents Die. Adhere the smaller tag using 3d foam tape. Diecut the opening in the tag.

From Album Tags and Accents Die, diecut white paper using the larger decorative tag die and diecut the smaller one from paper collection. Stamp from Thank You Sentiments Cling Stamp Set ''Happy Mother's Day''.

Stamp the leaves using Cheery Pansy Cling Stamp Set on the white paper with Ranger Archival Ink Pad - Leaf Green, cut out with the coordinating die, shade use this same ink and shape. Shape leaves using Pansy Shaping Mold.

To create flowers, stamp Cheery Pansy Cling Stamp Set on white paper with Ranger Archival Ink Pad - Jet Black and cut using the coordinating dies. Color with inks: Leaf Green, Deep Purple and Paradise Teal using sponge. Place the flowers in the Pansy Shaping Mold and sprinkle water on. Go through machine. Wait to dry. Layer the petals together using the hot glue gun making sure to offset them. Using paint brush, paint ready flower with Designer Dries Clear Adhesive and sprinkle Rajni Chawla's Crystal Clear Glitter.

Adhere the flowers and leaves to the card using a hot glue gun.

Other Products: White Cardstock, Stampin Up Markers Yoyo Yellow & Lavender Lace, Purple brads

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Prepare a 5 x 7" white card base. Die cut one of the Eyelet Lacy Frames out of white cardstock and adhere to the card. Cut one of the Eyelet Rectangles out of white cardstock, add foam dots to the back and adhere to card. Stamp the sentiment from the Cheerful Notes Sentiments on white cardstock with the Deep Purple ink, cut out with the Album and Tags die, add 2 tiny purple brads in the holes, add foam dots to the back and adhere to the card as shown.

Stamp all the leaves on white cardstock using the black ink, color in with the Leaf Green, cut out with the coordinating die, ink the edges with the Library Green ink and shape using the molds.

Stamp the Pansies on white cardstock with the black ink, color with the yellow and Lavender lace ink and cut out with the coordinating die, ink the edges with the Deep Purple. Place in the mold and shape, assemble the flowers.

Stamp the Lush Lilacs on the vellum with the White color Box ink, heat emboss with the Bridal Tinsel embossing powder, shape using the Deluxe Flower Shaping tool kit. Use the coordinating die to cut out the leafy accents that are pre-colored from the Lush Lilac paper collection.

Adhere all the leaves and flowers on the card. To finish, add glitter, Prills and crystal drops to the leaves and flowers.

Other Products: White Cardstock, Purple Cardstock, Dimensional Tape, Flat Back Pearls, Sizzix Vagabond 2 Adapter

For more tips on creating with the Burst of Spring collection, watch the tutorial at https://youtu.be/_8WJPTKIUlQ.

Instructions: My card size is 5 x 7". Make card base and cover with a piece of purple cardstock. Pick a piece of coordinating paper from the collection and layer it over the purple cardstock.

Using two of the ovals cut out a frame with the purple cardstock. Next cut out the Decorative Oval Die using white cardstock. Cut it apart so that it will fit behind the oval frame and glue down. Glue the finished oval frame to the card front and add the pearls. I also added a corner interest with the pearls. Set aside to dry.

Using Deep Purple Archival ink and Lulu Lavender Memento ink, stamp the flower petals onto white cardstock. Stamp the leaves using the Olive Green Stazon ink. Color using different ink colors to suit your taste. Using the coordinating die, cut out the petals and leaves and place them onto the3D Shaping Mold and spritz with water then run through the Vagabond machine. Lay out to dry. Once dry add Prills to the centers and glitter and again, allow to dry.

Stamp the Pansy Spray using Jet Black Archival Ink onto white cardstock and color using various inks and the Dove Blender Pen. Using the coordinating die, cut out the spray and add glitter, then allow to dry. Add the flowers and glue down then add dimensional tape to the back. Attach the spray to the bottom of the decorative oval.

I found one of the tickets on the paper collection and cut out then added dimensional tape to the back. Adhere to the front of the card and your card is ready to go. This one will mail easily!

Other Products: Smooth white cardstock, Die Cutting Machine, Score Board, Foam Dots and Distress inks Seedless Preserves.

For more tips on creating with the Burst of Spring collection, watch the tutorial at https://youtu.be/_8WJPTKIUlQ.

Instructions: The ready side-fold card from smooth white cardstock measures 5 1/2" x 7". To create the top layer, cut a piece of white cardstock measuring 5" x 6 1/2". Smush seedless preserves on the craft sheet, spritz it with water and rock n roll the paper in distress ink. Lift the ink and create few layers of the color. Dry between each layer using a heat gun. Once happy with the background stamp the image from Delicate Pansy Spray Cling Stamp Set with Vibrant Fuschia randomly. Score the panel at 1/8th of an inch every time. Using the second largest die from Eyelet Basic Large Ovals Die, cut a window in the center. Also, cut an eyelet frame by nesting the first and second largest die. Adhere the frame around the window as shown. Cut the small fancy frame using Intricate Swirl Frame Die and adhere from the back of the window. Stamp the sentiment from the Today's Quotes Cling Stamp Set using Vibrant Fuschia on a paper and layer it from the back of the window creating dimensions.

Stamp the image from Delicate Pansy Spray Cling Stamp using black archival ink and color it using Zig Clean Clear Brush Markers. Die cut the image using its coordinating die.

Using Songs of Spring Die, cut a pair of birds from the Singing in the rain collection. Shape them a little with your fingers.

Split the painted image in 2 and adhere on the top left and bottom right corners as shown. Also, adhere a pair of shaped birds for extra interest.

Stamp the butterfly border on vellum sheet using white frost color box ink and sprinkle some white heat embossing powder. Dust extras back and heat set the image using a heat tool. Die cut the border using it's coordinating die. Cut apart the butterflies and finish the card by adding butterflies to the card.

Other Products: Card stock, white; chalks; Stickles, Crystal; foam tape; sheer polka dot ribbon

For more tips on creating with the Burst of Spring collection, watch the tutorial at https://youtu.be/_8WJPTKIUlQ.

For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.

For more tips on creating with the diamond dies, watch the tutorial at https://youtu.be/JwS0Rmysd98.

Instructions: Click here to see a larger photo of his project. Die cut 6.25" x 4.25" tag from white card stock. Die cut 5.75" x 3.75" tag from purple design paper. Cut the 6" x 2" Decorative Pocket Accent Die from white card stock and adhere to the back of the purple design paper tag. Adhere to white tag. Trim the Decorative Pocket Accent die to fit. Use the 1" x .5" tag topper accent die to cut the opening at the top of the tag for the ribbon.

Place the largest Eyelet Diamond die on white card stock. Place the center piece of the Lacy Diamond die in the center and cut both pieces at the same time. Add to the tag with foam tape. Stamp Pansy Frame with Jet Black, color with chalks. Die cut with coordinating die. Add to tag with foam tape.

Using the Birthday Love' stamp, mask the word 'Birthday' and stamp the word 'love' on white card stock with Magenta Hue. Die cut with smallest Eyelet Diamond die. Ink around the edges with the same ink and then adhere to the center of the card. Add crystal Stickles to flowers.

Other Products: Smooth white cardstock, Die Cutting Machine, Score Board, Foam Dots and Distress inks Seedless Preserves.

For more tips on creating with the diamond dies, watch the tutorial at https://youtu.be/JwS0Rmysd98.

For more tips on creating with the Burst of Spring collection, watch the tutorial at https://youtu.be/_8WJPTKIUlQ.

Instructions: The ready side-fold card from smooth white cardstock measures 6" by 8". To create the first layer, choose the paper from designer paper collection and cut to size measuring 5 1/2" by 7 1/2". Distress all the sides with Seedless Preserves and the further distress them with sharp scissors. Next, layer the white die cut using Intricate Swirl Frame Die. Again the paper from the same collection and cover the front of the frame die cut showing only the lacy frame. Distress it using distress ink and then further distress the panel using sharp scissors.

Stamp the image from Burst Of Spring Cling Stamp Set using black archival ink and color it using Zig Clean Clear Brush Markers. Die cut the image using its coordinating die. Add dimensions to the image by using foam dots.

Cut a fancy frame from white cardstock using Lacy Diamond Die and 3 frames by nesting largest 2 dies from cut Basic Diamond Die. Layer both of them as shown by adding dimensions using foam dots. Layer the painted image on the top front panel as shown and finish the card by adding a sentiment from the paper collection.

Other Products: Foam tape, Gansai Tambi watercolour paints, Versamagic inks - Pretty Petunia, Nuvo Pure Sheen Glitter - Diamond,

For more tips on creating with the Burst of Spring collection, watch the tutorial at https://youtu.be/_8WJPTKIUlQ.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Cut a piece of white cardstock 12" x 6", score at 6" along the long side and fold to create a base card of 6" x 6". Cut a 6" x 6" panel from the patterned paper and die cut the inner circle out with the largest plain die from the HCD1-7154 Eyelet Circle & Basics Die set. Die cut the eyelet edge using the eyelet circle die from the HCD1-7154 Eyelet Circle & Basics Die set and adhere to the back of the inner circle. Add this to the base card with foam tape. Die cut a frame from the HCD1-7179 Butterfly Kisses Decorative Dies in both white cardstock and purple patterned paper. Trim the corners and adhere the purple paper to the white cardstock die cuts and then adhere to the four inner corners as shown.

Stamp two vase and flower images from the HCPC-3863 Burst of Spring Stamp in Jet Black ink on watercolour card. Colour with Gansai Tambi watercolour paints and die cut with the coordinating die. Cut the extra flower from the spare image and adhere to the flower on the first image. Add the 3D Crystal Lacquer to the vase and allow to dry. Add Cyrstal Clear glitter to the flowers with Dries Clear glue on a fairly dry sponge. Shape the vase and adhere to the front of the card as shown.

Stamp the left side and right side pansy spray images from the HCPC-3864 Delicate Pansy Spray set in StazOn Jet Black ink and colour with the Gansai Tambi water colour paints and die cut with the coordinating die. Shape and add Crystal Clear glitter to the image with a fairly dry sponge. Trim and add to the right and left sides at the base of the vase. Add a small trimmed spray to the top left of the card.

Stamp the flower images from the HCPC-3862 Cherry Pansy Stamp set in Pretty Petunia on Iris cardstock. Colour the light purple flowers with Pretty Petunia and colour the dark area with Pretty Petunia with a Fantastix pen. Die cut using the coordinating die and colour the flowers on the back with Pretty Petunia ink. Shape using the coordinating mold and assemble when dry. Add Crystal Clear glitter to the flowers with Dries Clear glue on a damp sponge and Lemon Chiffon Prills to the centres of the flowers. Adhere over the pansy image on the bottom right and the pansy spray on the top left as shown.

Stamp the leaf images from the HCPC-3862 Cherry Pansy Stamp set in Library Green ink on Iris cardstock. Colour with Leaf Green and Olive inks and die cut with the coordinating dies. Colour the backs with Leaf Green ink. Shape using the coordinating molds and add Crystal Clear glitter to the leaves with Dries Clear glue on a damp sponge. Add around the pansies on the top left of the card.

Die cut the small tag using the tag die from the HCD1-7201 Ticket and Tags Die set and adhere under the spray of flowers on the top left of the card.

Other Products: White Cardstock, Orange Cardstock, Pencil colors, Clear drying glue, 3D Foam tape, Twine. Ultra-thick embossing powder

For more tips on creating with the Burst of Spring collection, watch the tutorial at https://youtu.be/_8WJPTKIUlQ.

Instructions: The finished card measures 7-1/2 x 9-1/2". For the base of the card, cut white cardstock 15 x 9-1/2". Score at 7-1/2" from the longest side and fold. Cut green color pattern paper from the collection and adhere on the base of the card with clear drying glue leaving 1/4-inch border. For the next layer, cut orange cardstock 9 x 7" and layer on top pattern paper. For the final layer Choose pattern paper from the paper collection and adhere on top of orange cardstock with clear drying glue.

Die cut purple cardstock twice using Fleur Border Basics Die largest die and pattern paper using smallest die from the set. Mat the die cut pattern paper with die cut purple cardstock keeping the border part visible. Arrange them in the center of the card as shown.

Die cut white cardstock using the largest die from the Diamond Basics Die set and smallest die from the Lacy Diamond Die set. Die cut purple cardstock using second largest die from the Eyelet Diamond Die set. Stamp the white cardstock using Petite Pansy Frame Cling Stamp Set and die cut using the coordinating die. Color the image using pencil colors. Cover the colored image with ultra-thick embossing powder. Once all the elements are ready arrange them as shown.

Die cut the sentiment ticket and tag from the paper collection using Ornamental Tags Die and Album Tags and Accent die and tie them with a twine as shown.

Other Products: White Cardstock, Big-Shot Machine, dry glitter-rock candy.

For more tips on creating with the Burst of Spring collection, watch the tutorial at https://youtu.be/_8WJPTKIUlQ.

Instructions: White Card size 6"x 6" (final size). Cut two Petite Pocket Accents Die on white cardstock and adhere on the left and right-side edges, as shown. Adhere pattern paper from the collection size 5.875" x 5.875" with torn edges. Cut one Elegant Pocket Accents Die and one Ornate Pocket Accents Die on white cardstock and arrange them with foam tape.

Stamp some Cheery pansy flowers and leaves with archival ink-cactus flower and library green and cut them with coordinating die and color them archival ink. Shape them using Pansy Shaping Mold, assemble them and add prills at the centre of the flower. Sprinkle dry glitter-rock candy and arrange these flowers and leaves as shown.

Add sentiment from the paper collection and adhere on the top left side.

Other Products: Crafters Companion 3D Embossing Folder Ornate Lace, Floral Cardstock, Dimensional Tape, Hot Glue Gun, Big Shot, MISTI

For more tips on creating with the Burst of Spring collection, watch the tutorial at https://youtu.be/_8WJPTKIUlQ.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Card size is 5 x 7". Score and fold 10 x 7" white cardstock at 5" to create top fold card base. Cut another piece of white cardstock 4 1/2 x 6 1/2", stamp the sentiment using Majestic Violet ink, place in embossing folder and run through the diecutting machine. Adhere to the card base using dimensional tape.

Stamp the Cheery Pansy with Majestic Violet ink, color with Majestic Violet, Buttercup and Magenta Hue inks. Stamp the leaves with Olive ink and color with Fern Green. Diecut the flower and leaves with coordinating dies, place in the Pansy Shaping Mold, spritz with water and run through the diecutting machine. Adhere the flower petals together using dries clear adhesive, press down in the centers using the Deluxe Flower shaping kit, sponge the pansy and leaves with dries clear adhesive and sprinkle with Crystal Clear glitter. Add glue and Heart of Gold Prills to the flower center.

Adhere the pansy and leaves to the card using the hot glue gun as shown.

Other Products: Ranger Embossing Powder - White, Creative Expressions Aurora Crystal Sparke Embossing Powder, Close to my Close White Daisy Pigment ink, Distress Oxide ink - Lucky Clover, Picked Raspberry, Broken China, Wild Honey, Twisted Citron, Black Soot, Nuvo Pure Sheen Glitter - Diamond

For more tips on creating with the Butterfly Dreams collection, watch the tutorial at https://youtu.be/uCKKJfAQFHA.

For more tips on creating with the diamond dies, watch the tutorial at https://youtu.be/JwS0Rmysd98.

For more tips on creating with the Sweet Peony collection, watch the tutorial at https://youtu.be/L9_MLkvpGPQ.

Instructions: Cut a piece of white cardstock 10" x 7", score at 5" along the long side and fold to create a base card of 5" x 7". Cut a piece of patterned paper including the Dream again sentiment 4 3/4" x 6 3/4" and adhere to the base card. Cut a piece of peony patterned paper 5" x 7" and die cut the diamond out of the centre of the card using the second largest diamond die. Cut a diamond frame using the largest and second largest diamond die from teal paper. Add Crystal Clear glitter to the frame with Dries Clear glue on a damp sponge and then adhere to the diamond opening. Add this to the card base.

Stamp the images from the HCPC-3819 Small Sweet Peony Stamp set on vellum using White Daisy ink and emboss with white embossing powder. Colour on the back with Picked Raspberry, Broken China and Wild Honey inks and die cut with the coordinating dies. Trim the flowers and shape using a groove tool. Assemble using two larger and one smaller flower for the three small petals for the smaller flower, pierce the centre of the flowers and thread through the white fluffy stamens. Glue in place with Dries Clear glue and when dry trim the stamens and then adhere around the bottom right of the card around the diamond.

Stamp the leaf images from the Leafy Accents using White Daisy ink on vellum and emboss with white embossing powder. Colour on the back with Twisted Citron and Lucky Clover inks and die cut with the coordinating die. Shape with the groove golf tool and adhere around the peonies.

Stamp the leaf images from the HCPC-3819 Small Sweet Peony Stamp set in Library Green ink on flower shaping cardstock. Colour in with Leaf Green and Olive inks and die cut with the coordinating dies. Shape and add Crystal Clear using Dries Clear glue on a damp sponge and then adhere around the flowers over the leaves.

Stamp three butterfly images from the HCPC-3835 Leafy Accents Stamp set in White Daisy ink on vellum. Colour with Broken China, Picked Raspberry, Wild Honey and Black Soot inks and die cut with the coordinating die. Trim the last third of the wing off the end and the body off one of the butterflies, trim the wings and shape and adhere to a base butterfly. Trim two thirds off the wing and the body of the third butterfly, trim and shape the wings and adhere over the base butterfly. Add Crystal Clear glitter to the butterfly with Dries Clear glue on a fairly dry sponge and then adhere the butterfly to the to right of the diamond as shown.

Stamp the sentiment image from the HCPC-3845 Just for You Sentiments Stamp set in White Daisy in on vellum. Die cut the sentiment out using the second smallest banner die from the HCD1-7204 Arrows and Banner Dies and shape and adhere to the bottom right as shown.

Other Products: Handmade paper, green floral wire, green floral tape, Soft matte gel, satin ribbon

For more tips on creating with the Burst of Spring collection, watch the tutorial at https://youtu.be/_8WJPTKIUlQ.

Instructions: Click here to see more photos of this project. To prepare flowers, first stamp small sweet peony flowers on foam paper using buttercup archival and cut with coordinating die. Apply same ink on the center of the flowers. Shape the flowers using hot iron. Tie stamens on floral wire and add shaped flowers using designer glue. Create multiple flowers using large and small stamps and dies. To prepare leaves, stamp cheery pansy leaves using olive green archival and cut with coordinating die. Color the leaves using acrylic color (dilute the paint using water). Shape leaves using shaping mold. Cut and glue leaves on floral wire using designer glue.

Cut strips of foam paper which are 3/4" wide and 4" long. Color the strip using leaf green archival and cut thin slits on it. Heat and twist the slits. Glue these strips on floral wire using hot glue. Once all the elements are ready keep them aside. Take floral wires and join them using floral tape and make that 26" long. Fold from one end and make a loop. Arrange flowers and leaves on the wire using floral tape. When finished with all arrangement make a loop on another end. Tie ribbons on both loops.

For the finished look apply soft matte gel on the flowers and add glitter.

Other Products: 8x4 inch wooden cross, lavender and white acrylic paint

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Click here to view a larger photo of this project. Paint cross with lavender paint and then a thin coat of watered-down white acrylic paint.

Stamp the large and medium dogwoods from the Flowering Dogwood set in Majestic Violet, sponge centers with Vivid Chartreuse and outsides with Majestic Violet and cut out with corresponding dies and sculpt with the 3D Floral Basics Shaping Mold. Cut out stamens from the Flowering Dogwood set in lavender cardstock wrap around beaded stamens and add to the centers of the flowers. Stamp the dogwood spray from the Flowering Dogwood & Doves set in jet black and sponge with Tea Rose, cut out with corresponding dies. Sponge blossoms with adhesive and cover with Crystal Clear.

Stamp, and sponge leaves from the Flowering Dogwood set in Bamboo Leaves, cut out with corresponding dies and sculpt.

Adhere flowers and leaves to cross as shown.

Other Products: White Cardstock, ColorBox Ink (Hyacinth, Thistle, Seaweed, Chocolate), Scrapbook Adhesives by 3L (Creative Photo Corners White, 3D Foam Squares, Dual Tip Glue Pen, E-Z Runner Grand) Ivory Burlap String

For more tips on creating with the Lush Lilac collection, watch the tutorial at https://youtu.be/KDbdzC0MnAI.

Instructions: The card base is 6 x 6" in white cardstock. Cut the light purple patterned paper to 6 x 6". Find and cut out the coordinating 6 x 6" card base from the patterned paper pack. Trim down to the green scalloped border. Adhere this layer to the larger layers using white photo corners. Cut a piece of the cream patterned paper that is 1 x 6" and add the purple border strip along each edge. Adhere to the card. Cut a piece of green patterned paper that is 4.5 x 4.5" and round the corners. Adhere to the card using 3D foam squares. Cut the middle from the other coordinating 6 x 6" patterned card, again with the corners rounded. Adhere to the middle of the card using 3D foam squares.

Add the light purple mini tag to the top of the card and add a bow of ivory burlap string. Find and cut out the "It's Your Special Day" and "Hoping Your Day is Perfect". Mat the first in purple patterned paper. Set these aside for now.

Stamp one each of the Lush Lilac Flowers, Lush Lilac Spray and Lush Lilac Small Bloom using brown ink (Chocolate) onto white cardstock. Add color to the images using ink and daubers. Using green ink (Seaweed) add color to the leaves and stems. Add darker purple ink (Hyacinth) to the middles of all of the flowers and parts of the backgrounds. Using lighter purple ink (Thistle) add color to the rest of the flower images. Shape the larger images using the Deluxe Flower Shaping Kit. Shape the small Lush Lilac flowers using the 3D Lush Lilac Shaping Mold.

Assemble the flower spray and bloom. Add light purple Prills to the middles of all of the small flowers. Let dry. Add the spray to the top right hand corner of the card. Add the small bloom to the bottom left hand corner of the card. Adhere the larger matted sentiment to the very middle of the card using 3D foam. Add the small strip just below, also using 3D foam.

Other Products: Nuvo Silver Moondust glitter drops, Copics N2, N4, BV000 & RV42, organza ribbon Stampin up! Ink pads: Berry Burst, Old Olive, Mango Melody, Granny Apple Green, Rich Razzleberry, Gorgeous Grape, Black Memento ink, black & clear embossing powders, transparent glitter, old olive card, Archival inks: Magneta Hue, Deep Purple, hot glue, Kuretake pens with water brush, SVG Alphabet file #252472

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Click here to  view a larger photo of this project. Make the "H" pennant: Die cut 2 of the largest arrows from the sweet peony paper collection and glue them back to back. Curl the top of the arrow over to the back and secure with dries clear glue leaving a gap to thread ribbon through. Cut 2 x "H" using SVG file and layer these centrally onto the banner. Stamp 1 large peony bud and 3 small peony buds onto white card by inking the leaves with old olive and the buds with berry burst, use a water brush to spread the ink and colour the images. Diecut. Add a little more ink to shade the blossoms and shape using the flower shaping tools. Adhere to the banner using hot glue. Using some scrap from the paper collection, die cut 2 x 2nd smallest arrows, glue together and curl forward, secure with dries clear glue.

Make the "E" pennant: Die cut 2 of the largest arrows from the Backyard Blossoms paper collection and glue them back to back. Curl the top of the arrow over to the back and secure with dries clear glue leaving a gap to thread ribbon through. Cut 2 x "E" using SVG file, using paper from the collection and adhere these centrally onto the banner. Stamp the coneflower onto white card by inking the leaves with old olive and the flowers with mango melody (stamp 2 additional heads for the large coneflower), use a water brush to spread the ink and colour the images. Diecut. Add a little more ink to shade the flowers and leaves and shape using the flower shaping tools. Layer the 2 additional heads of the larger flowers on top of the complete coneflower and glue the head of the flower, cover with black gala glitz. Add gala glitz to the smaller flowers in the same way and use hot glue/wet glue to position the flowers onto the banner. Using some scrap from the paper collection, die cut 2 x 2nd smallest arrows, glue together and curl forward, secure with dries clear glue.

Make the "A" pennant: Die cut 2 of the largest arrows from the Sweet as Honey Paper Collection and glue them back to back. Curl the top of the arrow over to the back and secure with dries clear glue leaving a gap to thread ribbon through. Cut 2 x "A" using SVG file using contrasting paper from the collection and adhere these centrally to the banner. Stamp the bees in black memento ink, cover in black embossing powder, remove excess and heat to set. Colour using mango melody ink. Die cut and add transparent glitter to the wings. Shape using flower shaping tools and adhere to the banner using hot glue. Using some scrap from the paper collection, die cut 2 x 2nd smallest arrows, glue together and curl forward, secure with dries clear glue.

Make the "R" pennant: Die cut 2 of the largest arrows from the Oakberry Lane Paper Collection and glue them back to back. Curl the top of the arrow over to the back and secure with dries clear glue leaving a gap to thread ribbon through. Cut 2 x "R" using SVG file, using contrasting paper from the collection and adhere these centrally to the banner. Die cut 2 of the see-sawing squirrels from the pad and a 3rd from white card layer these together using dries clear glue. Shape using the flower shaping tool and add to the banner with hot glue. Stamp the small and medium blossoms onto white card using Deep purple archival ink and die cut. Colour the edges of the blossoms with the ink and place in the mold face down. Run through the diecutting machine to shape and layer the smaller flower inside the larger dries clear glue, add stamens to the centre. Stamp, die cut and mold the leaves in the same way but using the paper from the pad and old olive ink. Add to the banner using hot glue. Using some scrap from the paper collection, die cut 2 x 2nd smallest arrows, glue together and curl forward, secure with dries clear glue.

Make the "T" pennant: Die cut 2 of the largest arrows from the Buttons and Blooms Paper Collection and glue them back to back. Curl the top of the arrow over to the back and secure with dries clear glue leaving a gap to thread ribbon through. Cut 2 x "T" using SVG file, using contrasting paper from the collection and a 3rd with white card, adhere these centrally to the banner. Stamp the smallest blooms onto white card using berry burst ink and die cut. Colour using magenta hue archival ink on daubers and shape with the flower shaping tools. Stamp the leaves onto old olive card using old olive ink and diecut. Shape using the mold. Add dries clear glue to the top of the leaves and sprinkle with transparent glitter. Stamp the buttons onto paper from the pad using black ink, cover with 3D crystal lacquer and allow to dry. Position all the elements and hot glue into place.Using some scrap from the paper collection, die cut 2 x 2nd smallest arrows, glue together and curl forward, secure with dries clear glue.

Make the "F" pennant: Die cut 2 of the largest arrows from the Patchwork Daisy Paper Collection and glue them back to back. Curl the top of the arrow over to the back and secure with dries clear glue leaving a gap to thread ribbon through. Cut 2 x "F" using SVG file, using contrasting paper from the collection, adhere these centrally to the banner. Stamp one each of the swirling daisies onto white card using black memento ink. Colour using granny apply green and magenta hue ink then die cut. Shape using the flower shaping tool and position onto the banner using hot glue. Add silver moondust glitter drops into the centre of each flower. Using some scrap from the paper collection, die cut 2 x 2nd smallest arrows, glue together and curl forward, secure with dries clear glue.

Make the "E" pennant: Die cut 2 of the largest arrows from the Floral Fashionista Paper Collection and glue them back to back. Curl the top of the arrow over to the back and secure with dries clear glue leaving a gap to thread ribbon through. Cut 2 x "E" using SVG file, using contrasting paper from the collection, adhere these centrally to the banner. Stamp the corset using Rich Razzleberry ink and colour using Copics. Shape the corset using the flower shaping tools and add transparent glitter. Adhere to the banner using hot glue. Using some scrap from the paper collection, die cut 2 x 2nd smallest arrows, glue together and curl forward, secure with dries clear glue.

Make the "L" pennant: Die cut 2 of the largest arrows from the Tulip Time Paper Collection and glue them back to back. Curl the top of the arrow over to the back and secure with dries clear glue leaving a gap to thread ribbon through. Cut 2 x "L" using SVG file, using contrasting paper from the collection, adhere these centrally to the banner. Stamp the leaves in old olive ink onto white card and water colour. Die cut and brush ink onto the edges of the leaves, shape using the flower shaping tools. Stamp the tulips and filler flowers in black memento ink onto paper from the paper collection and colour the stems with Olive ink. Brush magenta hue ink at the base of the tulips to shade, die cut and shape all the leaves and flowers. Hot glue into position and use wet glue to add transparent glitter to the flowers. Using some scrap from the paper collection, die cut 2 x 2nd smallest arrows, glue together and curl forward, secure with dries clear glue.

Make the "T" pennant: Die cut 2 of the largest arrows from the Burst of Spring Paper Collection and glue them back to back. Curl the top of the arrow over to the back and secure with dries clear glue leaving a gap to thread ribbon through. Cut 2 x "T" using SVG file, using contrasting paper from the collection, adhere these centrally to the banner. Stamp the spray onto white card using gorgeous grape ink and heat emboss with clear embossing powder. Colour the spray using Kuretake pens and a water brush. Shape using the flower shaping tools and adhere to the banner using hot glue. Using some scrap from the paper collection, die cut 2 x 2nd smallest arrows, glue together and curl forward, secure with dries clear glue.

Thread the banners and the mini banners onto a 1.5" organza ribbon and knot a little ribbon between each banner to position them and prevent movement. Leave some ribbon at the end for hanging the banner.

Other Products: White cardstock, Distress Oxide Worn Lipstick, Diamond Stickles, pink sheer ribbon

To find out how to shape the sweet peony watch these videos: Sweet Peony Flower Shaping Basics

How to shape the Sweet Peony 4 Different Ways 

Instructions: Die cut 2 of the Festive Holiday Decorative dies using white cardstock. TIP: when stamping with Pigment ink you will have to let it dry or set with a heat gun before die cutting and coloring to avoid smudging. Using the Peony Bud and Blossom stamp set, stamp the small peony 4 times.

Cut card base using the white cardstock 8 5/8" x 5 1/2". Fold card in half, I like to run a bone folder over the spine of the card to give it a clean finish. Trim the selected cardstock from the Sweet Peony Collection. Using circle dies, cut the circle center out of patterned mat and using the next size up cut a white circle.

Now you have all the elements done, you can complete the card. Adhere the patterned mat. Adhere the white Festive Holiday die cuts to the top and bottom of the card. Adhere the first layer of peonies, using 3d adhesive adhere your white circle, then using 3d adhesive adhere your patterned circle. On the top peony tie a bow and adhere in the center. On the bottom peony I have fussy cut two layers to adhere over the top. Use 3d adhesive between each layer. Using 3d adhesive adhere your "Life's Beautiful Moments" sentiment. Decorate with stickles as desired. I like to highlight the stamped flowers and the leaves and baby's breath on the patterned picture.

Other Products: Metal Closure, Ribbon, Cardboard, Assorted Stickers, Foam Dots, Cardstock, Rhinestones, Rope, Tape, Paper Cutter, Ruler, Pencil, Scissor, Brown Cardstock 8 sheets, Score Board

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Mini Album is 6 1/2 x 6 1/2 x 2". Cut 2 pieces of cardboard for the covers at 6 1/2 x 6 1/2" and the spine at 6 1/2 x 2". Take 2 pieces of brown cardstock and glue them together with 1/2" overlap, then tape or glue down the covers and spine with 1/8" gaps in between them. Draw a 1" line all the way around your book and cut that out, put tape or glue on it and fold everything to the inside of your book. Cut 2 pieces of cardstock at 7 x 6" for the inside of the album and glue these down.

To make the spine, cut 3 pieces of the brown cardstock at 6 x 1 3/4, 6 x 2 1/4 and 6 x 2 3/4". Now score them all 3 1/2 on both long sides, put tape on both sides of the fold now place them on top of each other. Glue the spine on your book.

Now for the pages, take 6 pieces of cardstock, cut them exact at 12 x 12". Now score and fold them in half, turn the page and fold in half again. Cut 1 score line in till the center, do this with all 6 of them. Now fold them in half and then double (I will put a photo on my blog). Put glue on the bottom of the center piece now you have a sleeve, do this with all 4. Now you can place them by putting the sleeves over the hinge part, by removing the tape on both sides. Now you have 6 pages and every page has 4 pages and a pocket.

To decorate the front of the album cut a designer paper 6 x 6 inch. Fussy cut a border of your choice from the same paper pad and adhere along the bottom. Take a piece of ribbon and tape this on the bottom, fold it to the back of the paper, now glue the paper on the cover. Glue the closure down, mat the photo on white cardstock and place it on the cover. Stamp and die cut the tiny flowers of the Floral Fashionista using Rich Cocoa ink, color with Summer Sky ink. Shape using coordinating mold. Stamp and die cut the medium sized peony three times with Vibrant Fuchsia ink, color with Magenta Hue and Buttercup ink. Shape using the Deluxe flower shaping mat. Stamp and die cut the Oakberry Blossom Leaves using Bamboo leaves ink. Color with Fern Green ink and shape using coordinating mold. Cover leaves in Crystal Lacquer and allow to dry. Layer and pierce the centers of the flowers as shown and insert stamens. Glue the flowers on the left bottom corner of the album. Place the crown rhinestone sticker on the cover.

For the back cover cut a 6 x 6" piece of patterned paper, then tape a piece of ribbon on it and put the other side of the closure on it. Take another piece of paper and cut this at 5 1/2 x 5 1/2" and glue this over the ribbon.

On the page shown, cut Floral Fashionista paper to 5 3/4" x 5 3/4" and adhere on pages. Mat photo in white cardstock and adhere onto page. Stamp the Floral Fashionista flowers in Rich Cocoa ink on white cardstock and die cut. Shape using coordinating mold. Stamp Oakberry Leaves with Bamboo Leaves, color with Fern Green ink and shape using coordinating mold. Layer leaves and flowers in lower left-hand corner, inserting rhinestones in the flower center. Finish by adding stickers as desired.

Other Products: Pierce Tool, Arteza Pens, Langton Watercolor Paper, Stickles Gold Glitter

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Score white cardstock to 4x10", this is a long card. Adhere patterned paper as shown to the front of your card sizing to 3.75 x 9.75" which will leave a tiny white edge. 

Stamp and diecut using the black ink onto watercolor paper the patchwork daisy flowers. Color using watercolor pens and once dry add some clear glitter glue which will really brighten the overall look of the flowers.

Diecut the elgant pocket accents die in white and create a frame which you will arrange your flowers along.

To make the Oakberry blossoms, stamp using the Crimson Red ink onto one of the sheets of paper from the collection. Also stamp one petite floral flower. Now add some color by using your Copic pens and add more Crimson Red ink to your flower edges to give them depth, die cut and shape using the Deluxe Flower Shaping Kit. Add some Frosting Powder to your flowers for added sparkle. Select similar shade of stamens, color with Copic pens to match. Pierce the center and add the colored stamens, adhere.

Now stamp the leaves from the Oakberry set using Leaf Green Archival ink onto green designer paper. Shape using Deluxe Flower Shaping kit, add Frosting Powder and glue to the flowers. Cut a sentiment from the paper pad. Arrange all as shown and adhere.

Stamp your sentiment from Just For You sentiments set in black ink to finish your card.

Other Products: Versa mark, vellum paper, white satin cord, micro beads, flat back pearl, cheese cloth, smooth white cardstock, white embossing powder

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Ready upside fold card measures 6" x 8". To prepare card mat, take a piece of pattern paper from the designer paper collection measuring 7 3/4" x 5 3/4". Adhere it on the ready card base. Choose another pattern paper from the designer paper collection and cut a piece measuring 7.5" x 5.5". Tear it diagonally from the both side and distress the edges using scissors. Arrange it on the card using dimensional tape as shown. Cut borders using frame a card Leafy Borders die from the white cardstock and glue on the center part of card. Glue flat back pearl on borders.

Choose a sentiment card from love paper collection and cut it using eyelet circle & basic small die. Also cut a round frame using same die from the white cardstock. Glue frame on sentiment card. Cut 2 decorative borders from white cardstock using elegant pockets accents die. Glue both pieces on back side of sentiment card and mat it on the center of card using dimensional tape.

Stamp Sun Kissed Fleur Stamp on vellum paper using VersaMark and heat emboss it with white embossing powder. Cut with coordinating die. Paint flowers using sunflower yellow ink and shape flowers using round object. Glue the layers of the flowers and add micro beads in the center. To prepare leaves, stamp leafy accents stamp on white cardstock using olive green ink and cut with coordinating die. Paint leaves using leaf green archival and olive green archival. Shape them in shaping mold. Arrange all the elements on the card. Once satisfied with the arrangements glue using hot melted glue. Tie a bow using white satin cord and glue it. For the finished look apply glitter on the flowers using adhesive that dries clear.