Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, gold embossing powder, VersaMark, heat gun, twine

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

For more tips on creating with the Butterfly Dreams collection, watch the tutorial at https://youtu.be/uCKKJfAQFHA.

Instructions: See a video here https://photos.app.goo.gl/Uvn4Q8ksBXHB6ooRA. Create a white cardstock blank card 8 1/4 x 5 3/4” (A5). Cut kraft card 8 1/8 x 5 5/8” and pink paper 8 x 5 1/2”. With distressing tool or scissors, distress the edges and mat and layer keeping adhesive 1/2” from the edges. Cut green paper at 7 1/2 x 5” and pattern paper at 7 3/8 x 4 7/8”, ink with Sepia prior to distressing the edges and adhere leaving 1/2” gap from the edges. Add all layers onto the card blank and gently pull back edges to further distress the mat and layers.

Die cut fanciful doily from Butterfly Kisses Decorative Die set, 1 in white/1 in pink. In white die cut 2 decorative strips from Ticket and Tags Die set, 1 lace top from Diamonds and Lace Die, 2 swirling tag from Ornamental Tags Die set, 1 small vine from Cut Mat Create 1B Die set. Stamp the butterflies on white paper with VersaMark, heat emboss in gold and diecut using coordinating die.

From Ticket and Tags die set, cut the large tag and tag topper in kraft card and the smaller tag and reinforcement in white. Prior to assembling the tag, distress and ink the edges with Sepia. With VersaMark stamp Large Wild Rose and heat emboss in gold. Thread with twine. From Ornamental Tags mat and layer the tag A Gift For You using patterned paper and kraft card, distress and ink the edges with Sepia.

Stamp out multiple Wild Rose petals in all sizes with Pink Peony and leaves in Leaf Green and die-cut with coordinating dies. From the edges of the petal use Pink Peony to colour part way down each petal leaving the base of the petal white/softer pink. Colour the leaves in Leaf Green. Edge petals and leaves in a stronger ink. Spritz the petals/leaves whilst in the mold to loosen the paper fibers prior to running though the die-cut machine. Remove them from the mold and further shape using the Deluxe Flower Shaping Kit. Layer up the petals with adhesive. When dry, pierce the centre of the rose and thread stamens. For the large bud rose, use the smaller petals and ball tool to form a ball and layer larger petals around to give a bigger bud centre.

With a glue gun, decorate the card adding accents, tag and roses. Tuck in leaves as you build the spray, add sentiment tag, butterflies and vine. Dab roses and leaves with Dries Clear and add glitter.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, Distress Ink Peeled paint, lace, 1/4" ribbon, pearls

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: Cut a piece of white cardstock 8 1/4 x 8", score at 4” and fold. Cut a piece of white cardstock 8 x 3 3/4", 7 1/4 x 3 1/4". Cut out 23" white ribbon.

Use the Stack and Store daubers to color all edges of 8 x 3 3/4" and 7 1/4 x 3 1/4" white cardstock with Distress Ink Peeled paint and Leaf Green ink. Stamp leaves from Oakberry Lane Blossoms Cling Stamp Set in Leaf Green ink at the edges of colored cardstock. Attach all pieces of paper and ribbon to the card.

Stamp blossoms from Large Wild Rose Cling Stamp Set and Small Wild Rose Cling Stamp Set in Rose Bud ink onto Deluxe Flower Shaping paper and diecut with coordinating dies. To make this card, you`ll need 2 large blossoms, 3 smaller blossoms and 5 small blossoms. You`ll also need 2 branches from Leafy Accents Cling Stamp Set and 4 leaves from Large Wild Rose Cling Stamp Set. Stamp them in Leaf Green ink and cut out with coordinating dies.

Use the Stack and Store daubers to color all flowers and leaves. For big flowers use Pink Peony ink, for leaves use Distress Ink Peeled paint, Leaf Green ink and a little bit of Rose Bud ink. Shape the leaves using their coordinating shaping molds. Use the Deluxe Flower Shaping stylus to shape all flowers. Thread stamens through the centers of flowers and attach with hot glue, trimming off the excess string. Use dimensional adhesive and hot glue to attach lace, blossoms and leaves onto card as pictured.

To add that extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers and stamped inscription.

Decorate card with a few small self-adhesive pearls.

Other Products: Paper Trimmer, Hot Glue Gun, Die Cutting Machine, Magnets, Water Mister Bottle, Dimensional Packing Material, White Cardstock

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

For more tips on creating with the Window Scene cards & dies, watch the tutorial at https://youtu.be/LnM95GR92ao.

Instructions: Click here to view another photo of this card. My card is 6 x 6". Stamp flower petals using Archival Buttercup and Magenta Hue ink. I used Magenta Hue to color the pink flowers and Brilliance Sunflower Yellow for the yellow flowers. I also used a hint of Brilliance Pearlescent Coral on the tips of the pink flowers to achieve the look I wanted. Cut out the petals using the coordinating dies. Spray the petals with water and use the Flower Shaping Tools to break down the fibers of the paper and shape. Set aside to dry. Once dry, hot glue layers of petals to form the flowers. Add Prills to the center of the flowers and set aside to dry. Once dry, add Crystal Clear glitter to the flowers and allow this to dry.

Stamp the leaves with Archival Fern Green ink and color using Vivid Chartreuse and Bamboo Leaves. Use the coordinating dies to cut out the leaves. Spritz the leaves with water and use the flower shaping tools to shape then set aside to dry. Once dry, I added the Crystal Ultrafine Transparent Glitter to them and set aside to dry.

Now it’s time to start working with the shaped Shutter Fold Card. Pick a 6 x 6" card front and trim it down 1/4” and glue to the inside of the card. Find a sentiment on the paper and cut out and apply a piece of dimensional shipping box and then glue to another sign from the paper. (I always save my shipping boxes for using for dimension). Glue to the inside of the card.

Using the circle die from the Rounded Sunlight Window Dies, cut out a piece of the paper collection. Using one of the decorative dies from the Rounded Eyelet Window Dies cut out each side of the circle shaped piece of the paper collection. Now use the paper trimmer and cut in half so that it fits each side of the card front. Next use one of the dies to cut a piece of plain paper to fit behind the decorative piece and adhere behind. Edge each piece with Magenta Hue ink to add a bit of color to the pieces. Apply a magnet to the side of the card front then glue the decorative piece of paper to the side of the card front.

Using the smaller circle die of the Rounded Window Frame Die, cut a piece of white cardstock. Now cut a circle of the decorative paper using the small circle die. Adhere a magnet to the back of the white cardstock piece and then cover it with the circle piece of paper. Apply glitter to the edges of the white cardstock piece and then glue one side to one side of the card front. Go around the piece with Magenta Hue ink to add color. Now, with the magnets installed it will close and hold the card together. You can apply the flowers to the decorative circle using hot glue. The card is finished.

Other Products: White cardstock, Pink cardstock, Distress Ink Tumbled Glass, Big Shot Machine, VersaMark Embossing Ink, White Embossing Powder, Bluefern Embossing Powder Breeze, Mini Mister, 3D foam tape, Hot Glue.

For more tips on creating with the Cascading Petals Collection watch the tutorial at https://youtu.be/DqhvfrsTI00.

For more tips on creating with the French Cottage Collection watch the tutorial at https://youtu.be/cATv3wk2_sM.

Instructions: Ready Card base size is 9”x 6”. Cut panel from white card measuring 8.7” by 5.7” adhere it on card base using 3D foam tape. Trim pattern paper from Tea Time Collection measuring 8.5” by 5.5” and adhere it using Designer Dries Clear adhesive.

Stamp a door stamp using versa mark embossing ink cover it in breeze embossing powder and heat it using heat tool. Cut it using coordinating die. Cut another door on white card and set aside, color door border using zig markers cover it with glitter dust. Adhere door border on white door using foam strip.

Stamp some leaf branch images from Cascading Wisteria Cling Stamp Set on green paper from paper collection, and required images on white card and flowers on pink card using versamark ink cover it with white embossing powder, heat using heat tool, diecut and shape using shaping tool. Color images using Zig Markers.

Arrange all ready elements as shown, make 3 bunches of small cascading Wisteria flowers on door using hot Glue. Add Green Nuvo Drops and glitter dust to embellish the card.

Stamp the sentiment from Birthday Quote Stamp set with Tumbled Glass Ink on white card and add on card.

Other Products: Smooth White Card-stock, Liquid glue, Die-cutting machine, Score-board.

For more tips on creating with the Cascading Petals Collection watch the tutorial at https://youtu.be/DqhvfrsTI00.

For more ideas on creating with the 5 x 7 Decorative Frame Dies, watch the tutorial at https://youtu.be/qdBFA5VpmSo.

Instructions: Create a side fold card from a smooth white cardstock, measuring, 6" by 8". Choose the paper from the designer paper collection and cut it measuring 5 1/2" by 7 1/2". Mat a white cardstock, little larger than the pattern paper to make a delicate white border all around. Layer the panel on the card front.

Cut all the required die cuts Decorative Circle Frames Die and assemble them as shown. The die cut is painted using Cactus Flower Archival Ink.

Stamp the image from Floral Song Cling Stamp Set on smooth white cardstock using black archival ink and color it using Zig Clean Clear Brush Markers. Next, Cut the image using its coordinating die.

Stamp tiny florals from Wisteria Petals Cling Stamp Set using Cactus Flower and foliage from Cascading Wisteria Cling Stamp Set using Olive green and cut them using their coordinating dies. Color the flowers using Majestic Violet and foliage using Leaf Green Archival inks and shape them using Deluxe Flower Shaping Kit. Prepare a few single petal flowers and add pearl beads to the flower centers.

Once all the elements are ready, assemble the front panel as shown and add some sparkle to the flowers using Rajni Chawla's Crystal Clear powder.

Other Products: Iris cardstock, foam tape, Versamagic ink – Pretty Petunia, heavy cardboard, Ranger Archival ink – Violet, hot glue gun

For more tips on creating with the French Cottage Collection watch the tutorial at https://youtu.be/cATv3wk2_sM.

For more tips on creating with the Cascading Petals Collection watch the tutorial at https://youtu.be/DqhvfrsTI00.

Instructions: Cut a piece of white cardstock 10” x 7”, score at 5” along the long side and fold to create a base card of 5” x 7”. Cut a piece of gold cardstock 4 15/16” x 6 15/16” and adhere to the front of the card. Stamp the door image from the HCPC-3908 French Doorway Cling Stamp Set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush markers and trim the image to 4 3/4" x 6 3/4" and adhere to the front of the card.

Stamp the lamp image from the HCPC-3908 French Doorway Cling Stamp Set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush markers and die cut with the coordinating die. Adhere to the top right of the door frame as shown. Stamp the pot plant images from the HCPC-3909 French Cottage 'scapes Cling Stamp Set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die. Adhere to either side of the door frame. Cut a piece of light green patterned paper 4 7/8” x 6 7/8”. Die cut the opening using the outer large tag die from the HCD1-7202 Album Tags & Accents Die set. Die cut the large decorative die from the HCD1-7263 Swirly Accent Spray Die set out of white and gold cardstock. Adhere the white die over the gold die slightly offsetting the dies and then adhere behind the top of the opening. Cut a piece of clear cardstock 4 3/4" x 6 3/4" and adhere behind the green paper and decorative dies. Adhere this to the front of the card with a double layer of heavy cardboard.

Stamp the wisteria images from the HCPC-3912 Cascading Wisteria Cling Stamp Set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating dies. Shape lightly, add Crystal Clear with Dries Clear glue on a dry sponge and adhere to the top of the card with foam squares.

Stamp the pot plant images from the HCPC-3909 French Cottage 'scapes Cling Stamp Set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating dies. Adhere to the front of the card as shown.

Stamp the long leaf branch image from the HCPC-3912 Cascading Wisteria Cling Stamp Set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die. Shape lightly, add Crystal Clear glitter with Dries Clear glue on a dry sponge and then add to the right side of the door frame with foam squares. Stamp the small leaf and wisteria images from the HCPC-3912 Cascading Wisteria Cling Stamp Set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die. Shape lightly, add Crystal Clear glitter with Dries Clear glue on a dry sponge and then add over the long leaf branch image with foam squares and over the pot plant on the right side of the door frame.

Stamp the small flower images from the HCPC-3908 French Doorway Cling Stamp Set in Magenta Hue and French Ultramarine inks. Colour the centres of the pink flowers with Tiger Lily ink and the blue flowers with Buttercup ink and die cut with the coordinating die. Colour the edges and backs of the pink flowers with Magenta Hue ink and the blue flowers with Pretty Petunia inks. Shape using the Groove Golf tools, add Crystal Clear glitter using Dries Clear glue on a damp sponge and adhere over the pot plants as shown. Add Heart of Gold Prills to the pink flower centres and Lemon Chiffon Prills to the blue flower centres.

Stamp the wisteria images from the HCPC-3911 Wisteria Petals Cling Stamp Set in Magenta Hue and Violet inks. Colour the images with Magenta Hue inks and then the centres of the pink flowers with Cactus Flower ink and the purple flowers with Majestic Violet ink and die cut with the coordinating die. Colour the backs of the flowers with Magenta Hue inks and then shape using the groove golf tools. Pierce the centres of the flowers and then thread the flowers onto a deep purple bead stamen and adhere using a hot glue gun. Make different lengths of the wisteria flowers. Add Leaf Green ink to the stamen wires and then trim and adhere to the cascading wisteria images with a hot glue gun.

Stamp the bird images from the HCPC3866 Tweet Cherry Blossom Cling Stamp Set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die. Shape using the coordinating mold and add Crystal Clear glitter using Dries Clear glue on a dry sponge. Add three birds over the door frame and the wisterias using foam squares doubled up. Add one bird over the flowers on the bottom left.

Trim the sentiment from the patterned paper and adhere to the. To finish add Crystal Clear glitter to the card front with Dries Clear glue on a dry sponge.

Inside – cut a piece of gold cardstock 4 7/8” x 6 7/8” and adhere to the inside right of the card. Cut a piece of light green patterned paper 4 3/4” x 6 3/4" and adhere over the gold cardstock.

Other Products: Memento angel pink, white cardstock

or more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

For more tips on creating with the French Cottage Collection watch the tutorial at https://youtu.be/cATv3wk2_sM.

Instructions: Create a 5 by 8 tall card and mat it with pattern papers from the Calla lily Collection. Cut the decorative door from the French doorway die set.

Stamp the flowers from the small wild rose cling stamp set with archival fern green and color them using memento rose bud and archival buttercup for small petals. Stamp the leaves from the leafy accents cling stamp set with archival fern green and color using memento bamboo leaves and olive green. Cut the flowers and leaves using their coordinating dies and shape them using the coordinating 3d shaping mold.

Adhere the door using foam tape and arrange everything as pictured. Lastly add a sentiment from the paper collection and dust the flowers with crystal clear glitter powder.

Other Products: White cardstock, Big Shot Machine, Distress ink-Peeled Paint, Seedless Preserves, Lindy’s Stamp Gang Magical-EnvyGreen, Hot Pink, Mini Mister.

For more tips on creating with the Cascading Petals Collection watch the tutorial at https://youtu.be/DqhvfrsTI00.

For more ideas on creating with the Decorative Royale Square & Circle Dies, watch the tutorial at https://youtu.be/tqmtn_TiVVw.

Instructions: Card base size is 6” x 6” (Final Size). Take pattern paper from the collection and adhere it on card base using Designer Dries Clear adhesive. Cut one die from Courtyard Elegance Die Set on white cardstock and adhere it using Designer Dries Clear Adhesive. Cut one Eyelet Circle Die on white cardstock and create background using distress ink-peeled paint and seedless preserves and sprinkle water with mini mister. Then sprinkle some Lindy’s Stamp Gang Magical-Envy Green, Hot Pink and spray water with mini mister.

Stamp some leaf branch images from Cascading Wisteria Cling Stamp Set on white cardstock using archival ink- library green and cut them with coordinating die and color them using archival ink-leaf green shape them using groove groove golf tool set, arrange as pictured. Stamp some flowers from French Cottage’Scapes Cling Stamp Set using archival ink-Leaf Green and cut them with coordinating die. Color them using archival ink-Pink Peony and shape them using Groove Golf tool. Add stamens at the centre. To make Wisteria flowers, stamp some petal images from Wisteria Petals Cling stamp Set on Deluxe Flower Shaping Paper-White using archival ink-majestic violet, cut them with coordinating die and color them using archival ink-vibrant fuchsia and leaf green. Shape them using Groove Golf tool set and arrange hanging wisteria flowers as pictured.

Cut one circle die from Decorative Circle Frames Die Set on white cardstock add sentiment from For My Friend Sentiments Cling Stamp Set using archival ink-Jet Black. Adhere it with foam tape.

Other Products: Glue, hot glue, twine white, ribbon, 3d squares, white card 120g, brush

For more ideas on creating with the 5 x 7 Decorative Frame Dies, watch the tutorial at https://youtu.be/qdBFA5VpmSo.

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: Create a double white base 3 3/4 x 6’’. Cut out a slightly smaller rectangle from white card. Cut the Majestic Swirl Frames Die out of pink paper from the French Cottage Paper Collection page 3B. Glue all layers on the base as shown.

Create foam flowers. To create large flowers, stamp them on Art Foam Paper using Memento Lilac Posies ink and cut with the coordinating dies from the collection. Apply lilac ink using the dauber. Form using a hot iron. Make a hole in the middle and insert the stamens. Add glue to each petal and bottom of the flower. Stamp the leaves with Ranger Archival Jet Black ink on Deluxe paper. Apply green ink using the dauber. Die cut with the coordinating die.

Glue the flowers and leaves to the card as pictured. Add string and ribbon as shown. Paint the petals and leaves with white paint.

Other Products: Hot glue, watercolour pencils, organza ribbon, black StaZon ink, white stamping card

For more tips on creating with the Cascading Petals Collection watch the tutorial at https://youtu.be/DqhvfrsTI00.

Instructions: Click here to view more photos of this project. Die cut 2 of the bird cages from flower shaping paper and adhere together. Cover in the nuvo mousse and set aside to fully dry.

Stamp the bird images onto white stamping card using black stazon and colour using water colour pencils. Die cut and then die cut a second shape only. Adhere the 2 die cuts together and shape the bird using flower shaping tools.

Using the flower shaping paper, stamp the leaves x 2, 2 flower stamp x 2, and 3 flower stamp x 2 using Toffee Crunch ink. Colour the flowers with cantaloupe, the leaves with pistachio and the branch with toffee crunch. Die cut and add shade to the leaf with Bamboo leaves and shade the flowers with tangelo ink. Spritz with water and shape using the flower shaping tools. Add dries clear glue to the flowers and sprinkle with crystal clear. Allow to dry.

Stamp 2 of the branches from the wisteria petals stamp set in espresso truffle onto the flower shaping paper and colour using the same colours and glitter as previously.

Using the border dies, diecut papers from the collection for the front and backs of the card blank. Add a pattern into the smallest and 3rd paper so that the white of the card shows through. Adhere to the card. Make a pocket using the border dies for the 3rd back page of the card, die cut a tag from the paper collection, add a bow to the tag and tuck the tag in to the pocket.

Adhere the bird cage to the back of the card so that the side and top hang over the edges. Position the leaves, flowers and birds using hot glue.

Die cut the shield from the paper collection and adhere to a white card shield. Adhere a sentiment across the front of this and adhere to the front of the card.

Die cut 2 more tags and a 2nd tag of white flower shaping paper, adhere these together and tie bows at the top of the tags. Hot glue these into place as shown.

Other Products: White cardstock, Top Boss Embossing ink pad, Gold Painty Pen, embossing folders, Copic Markers: V12, V15, BV00, BV02, Y15, Y35, RV10, E50, B21, B41, B45, E53, E33, E35, YG11, YG05, YG07, C3, C5

video For more tips on creating with the Cascading Petals Collection watch the tutorial at https://youtu.be/DqhvfrsTI00.

For more ideas on creating with the 5 x 7 Decorative Frame Dies, watch the tutorial at https://youtu.be/qdBFA5VpmSo.

Instructions: Click here to view more photos of this project. Card size: 4 3/4 x 6 3/4". The video above shows how to make a shaped card with dies. Fold a piece of white cardstock the size of card then place the die so that it hangs over the folded edge about 1/8” (just so that it does not cut the whole fold off), cut through both layers for your base. Cut another white top but this time cutting the full die on a single layer. Glue the full die cut to the card base matching all bottom and side curves. Cut a piece of vellum with the same outer die and cut off the very top so that it fits inside card. Put a line of glue just at the top then wipe off with your finger to make a super thin layer of glue before laying the vellum down on it.

Cut a Gold Luxe layer with the outer and the inner decorative die (no circles yet). The outer gold die cut will be used inside the card and the inner decorative die is for the front. Before gluing the gold to the front, cut a medium sized heart out of the middle. Now glue the gold onto the front. Cut a white heart frame using the same size heart as before and also a large eyelet heart together. Also cut the largest eyelet circle and then cut that with the largest basic circle to make a very thin circle frame for the gold circle in the center. Glue both frames on (be careful not to get glue on the gold paper as it will mess up the finish but you can clean it pretty well by applying a wet Q-tip then use a soft cloth to rub it dry).

For the inside: Emboss the medium heart left when making the heart frame. Cut an eyelet gold mat for the heart inside. Cut another white panel to match the card shape then emboss it and trim it to fit. Glue it to the inside, glue the gold outer edge on, glue the heart in the center (tip, place the heart upside down over the heart opening glue the gold mat to it upside down then put glue on the back which is face up and close the back of the card down onto it. Now your heart will be in the exact right place to show from the front of the card through the vellum). When dry, turn the card over and continue to decorate.

Stamp and emboss with gold, 2 sentiments on white cardstock. Die cut each out with smallest oval possible then edge with the gold painty pen. Glue one above the heart inside and the other at the bottom of the heart on the front.

Stamp, die cut and color 1 vine with hanging wisteria, right and left side of vine making a heart, and 1 of each bird. Glue the heart shaped vines to the front heart frame. Shape the vine with hanging wisteria a bit from the back then glue it to the top of the circle and heart, leave some wisteria up loose or use foam dots to pop up. Now glue both birds inside so that their heads are together and showing through the heart hole in front. Some flowers will be covered, not to worry. Glitter all the flowers and gloss all the leaves.

Other Products: Adhesive backed foam, white cardstock

For more tips on creating with the Cascading Petals Collection watch the tutorial at https://youtu.be/DqhvfrsTI00.

For more tips on creating with the French Cottage Collection watch the tutorial at https://youtu.be/cATv3wk2_sM.

Instructions: Create a 6 inch x 6 inch card base. Cut 6 x 6” purple piece from the Cascading Petals Paper Collection and adhere to card base, cut out the door panel and cut out the center with the Cut Mat Create 2B Die and adhere the center and the larger square to adhesive backed foam, distress both with Deep Purple and adhere to center of the card.

Stamp the flowers from the Cascading Wisteria Cling Stamp Set in Deep Purple and sponge with Bamboo Leaves for centers and outsides with Deep Purple, cut out with coordinating dies, sculpt with a stylus, add stamens and glitter.

Stamp the flowers from the Cascading Wisteria Cling Stamp Set and the birds from the Floral Song Cling Stamp Set and the topiary and pots from the French Cottage 'scapes Cling Stamp Set in black on white cardstock, cut out with corresponding dies and sponge with ink pads to color. Add glitter.

Cut out the sentiment from the paper collection and distress with Deep Purple, adhere with birds, pots, wisteria and flowers pictured.

Other Products: Gallery oil soft pastels 236, 235, 201

For more tips on creating with the Cascading Petals Collection watch the tutorial at https://youtu.be/DqhvfrsTI00.

For more tips on creating with the French Cottage Collection watch the tutorial at https://youtu.be/cATv3wk2_sM.

Instructions: Create card base using white cardstock 8 1/2 x 11", score and fold at 5 1/2". Cut Cascading Petals Paper Collection to 8 3/8 x 5 3/8". Glue it to the base of card.

Stamp window using Cottage Window & Hydrangea Cling Stamp Set with Ranger Archival Ink Pad – Coffee on the white paper and cut using the coordinating die. Place on card front using 3d double sticky foam for dimension. Colour using soft oil pastels 236 & 237. Sponge with dries clear adhesive and sprinkle with Crystal Ultrafine Transparent Glitter and Rajni Chawla's Crystal Clear glitter. Secure using hot glue.

To Create flowers, stamp the French Cottage ‘scapes Cling Stamp Set on paper with Ranger Archival Ink Pad – Plum and cut using the coordinating dies. Colour with this same shade. You will need 2 petals for each flower. Sprinkle water and shape using Groove Golf Tool Set. Layer the petals together using the hot glue gun making sure to offset them Sponge the petals with dries clear adhesive and sprinkle with Crystal Ultrafine Transparent Glitter and Rajni Chawla's Crystal Clear glitter

To Create leaves, stamp the French Cottage 'scapes Cling Stamp Set on paper with Memento Dye Ink Pad - Bamboo Leaves and cut using the coordinating dies. Colour with this same shade. Sponge with dries clear adhesive and sprinkle with Crystal Ultrafine Transparent Glitter and Rajni Chawla's Crystal Clear glitter.

To Create bike, stamp the Cottage Lifestyle Cling Stamp Set with Ranger Archival Ink Pad – Coffee on the white paper and cut using the coordinating die. Place using 3d double sticky foam for dimension. Colour using soft oil pastels 236, 237 and Ranger Archival Ink Pad – Plum. Sponge with dries clear adhesive and sprinkle with Crystal Ultrafine Transparent Glitter and Rajni Chawla's Crystal Clear glitter. Secure using hot glue.

Repeat this step using the 3-bunch wisteria from Cascading Wisteria Cling Stamp Set. Stamp onto white paper leaves with Memento Dye Ink Pad - Bamboo Leaves use the Stack and Store daubers to colour leaves. Stamp Wisteria flower with combo colour Memento Dye Ink Pad - Bamboo Leaves and Ranger Archival Ink Pad - Majestic Violet and diecut with coordinating die use the Stack and Store daubers to colour with this same inks. Sponge the flowers and leaves with dries clear adhesive and sprinkle with Rajni Chawla's Crystal Clear glitter. Adhere as shown.

Other Products: Watercolor paper; Die cut machine: White card stock; Memento Grape Jelly ink; Hot glue gun; clear gems

For more tips on creating with the Cascading Petals Collection watch the tutorial at https://youtu.be/DqhvfrsTI00.

For more tips on creating with the Cottage Garden Collection watch the tutorial at https://youtu.be/faBoB2s49RI.

Instructions: Prepare a 5 x 7” white card base. Lay a piece of the Cascading Petals paper on top slightly smaller.

Stamp the Cottage Window on the watercolor paper with the black ink and color with the Zig Clean Color markers. Die cut with the coordinating die, adhere to the card.

Stamp the Bird and vines on the watercolor paper with the black ink and color with the Zig markers, die cut out with the matching die, use the Flower Shaping tool and shape a little, add foam dots to the back of the bird and adhere the vines and bird to the card.

Stamp the Wisteria Petals on the flower shaping paper with the Grape ink, color with the same ink and cut out with the coordinating die. Use the Flower shaping tool and shape, build the flowers by putting a hole in the center and running a stamen through the center. Use the glue gun to keep in place, add 3-6 petals on each. To finish, add glitter to the bird, vines and flowers, add tiny gems to the pink flowers around the bird.

Other Products: Die cutting machine, water mister, hot glue gun, hot glue, scissors, heat gun, 13 arts roots, funnel tray

For more tips on creating with the Cascading Petals Collection watch the tutorial at https://youtu.be/DqhvfrsTI00.

For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: The finished card measures 6 by 6 inches. Cut a piece of paper in a violet paper (paper #10B) 12 x 6 inches, score and fold at 3” and 6” on the width side. Cut 3 pieces of lilac paper (paper #4B): 5 1/2 x 51/2, and two 2 1/2 x 2 1/2”. Adhere to the card base as shown. Cut 2 squares: 4 x 4 in paper 10B and 3 1/2 x 3 1/2 in the paper 5A. Paste them on each other and glue it on the center of the card base, at 1 1/2 inches from the border.

Die cut doily with the Rounded window frame die in the paper #5A. Die cut a circle with a bird on it in the paper # 2A with the Circle Basics Large Dies (3”). Adhere it to the doily and glue it on the square in the middle of your card base.

Stamp the Oakberry lane blossoms flowers with archival majestic violet ink on a white cardstock. Color it with the same color with a dauber and add a little touch of green in the center. Cut it with the coordinating die. Shape the flowers by using the 3D Shaping Mold. Add green and lilac stamens in the center of the flowers. Also stamp in green and cut leaves in the Cascading Wisteria kit.

Put roots on the card base. Glue cascading wisteria leaves over, and finally add flowers over it.

Cut a sentiment from your paper with a little larger violet paper under it. In the card, paste a piece of design paper from the paper #2A cut with a Cut Mat create 2A.

Other Products: Beading wire, Seed beads, wire cutting scissors, Fussy cutting scissors, SUP embossing folder-country floral, Hot glue gun, Versa-mark, Inks: Spectrum Noir- Pine tree, Crushed velvet, Spring meadow, Grasshopper. Creative Artist water colour box (a local brand of water colour blocks). Double sided 3D foam tape, double sided tape, Inking tools, White card stock.

For more tips on creating with the Cascading Petals Collection watch the tutorial at https://youtu.be/DqhvfrsTI00.

Instructions: This card when finished measures 8 1/2” x 6 3/4” (21cm x 17.5cm). Taking the white card stock make a tent fold card by cutting 2 of the above measurements. Scoring from the top the width of one of the cards, this will be the back part of the card base. Adhere the double side tape to this area. When the card is completed remove the protection tape and adhere both card pieces together. You can make a larger card this way without wasting a lot of card stock.

Finding the design paper from the collection Sheet 11B. Cut this a little smaller than the card front, also cut a piece of paper to measure the same as the embossing folder. Taking the Crushed velvet ink and the inking tool, ink all the edges of the card base and the edges of the matting. Do this to the embossed paper also the raised embossing. Adhere all to the card base using 3D foam tape.

Taking the gold cardstock cut the cage twice, trim away some of the cage so the swirls remain. Bring a curve into the cage tops. Adhere the cage points to the centre of the card edge adhere the other end of the cage to the card, making sure the curve stays in the cage. See the photo of the card. Taking the stamp for the sentiments and the gold embossing powder make the sentiments. Bring the grasshopper ink onto the sentiments and the glitter.

Make all the embellishments for the card. The branch with only leaves x5, the leaf branch with 3 wisterias x 1 the leaf branch with 2 wisteria’s x 1. The gold beads from the gold cardstock stamped with gold embossing powder x5. Each wisteria cluster is made with 3 petals. There are 41 clusters.

The wisteria clusters are made as so: cut the wire to 4” for each cluster. When the petals are still damp when they have been shaped using the flower mold, wrap them over a shaping tool and squeeze tight to shape the petals more. When these are dry use the pocking edge from the golf tool. Thread the bead onto the wire and twist to secure. Thread the wire through the hole in the petal, use the hot glue gun to secure the petals together. Once you have made all the clusters, place and wrap the wires to the wisteria shape. Make the wisteria flowers different lengths so when placed they will be in a natural form. Apply the clear drying glue with a hydra sponge and dip into the glitter, set aside to dry.

Adhere all the elements to the card by first placing the circle sentiment then the leaves and branches. Last the wisterias. A branch with only leaves and the sentiment across the front of the wisterias. To finish the card, use the stamped gold beads as fillers in and about the leaves.

Other Products: MISTI, transparent glitter and pearls.

For more ideas on creating with the 5 x 7 Decorative Frame Dies, watch the tutorial at https://youtu.be/qdBFA5VpmSo.

For more tips on creating with the Sweet Peony collection, watch the tutorial at https://youtu.be/L9_MLkvpGPQ.

Instructions: Cut a piece of 4" x 5 1/4" pattern paper from Wild Rose Paper Collection and adhere it on a 4 1/4" x 5 1/2" white card base. Die cut a piece of white cardstock using the die from Decorative Circle Frames Die. Cut away 1 1/4" from the middle and join the 2 bigger pieces in the middle. Adhere it to the card front using Darice Adhesive Foam Strips. Trim off the excess die cut hanging from the edge on both sides and adhere the edges to the card front using Designer Dries Clear Adhesive.

Stamp the sentiment from Words Of Encouragement Stamp Set on a piece of white cardstock with Vivid Chartreuse, Leaf Green and Olive Archival Ink using MISTI to get an ombre look. Die cut this piece using the die from Elaborate Oval Frames Die and adhere it on the card front as shown using Darice Adhesive Foam Strips.

Stamp the flowers from Small Sweet Peony Cling Stamp Set on a piece of Deluxe Flower Shaping Paper with Vibrant Fuchsia Archival Ink and ink using the same ink. Die cut them using the matching dies from Small Sweet Peony Die and shape using Deluxe Flower Shaping Kit. Add a green stamen from Medium Assorted Pearl Stamens to the flower centers.

Stamp the leaves from Oakberry Lane Blossoms Cling Stamp Set on a piece of Deluxe Flower Shaping Paper with Olive Archival Ink Pad and color it with Leaf Green Archival Ink Pad. Die cut the leaves using matching dies from Oakberry Lane Blossoms Die and shape them using 3D Blossoms Shaping Mold.

Apply Designer Dries Clear Adhesive on the flowers and leaves using Hydra Sponges and sprinkle transparent glitter. Arrange and adhere all the flowers and leaves on the card as shown. Add pearls to the die cut for finishing touch.

Other Products: White Cardstock, Diecutting Machine, Hot Glue Gun

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: Card size is 6 x 6”. Score and fold 12 x 6” white cardstock at 6” on the long side to create a top fold card base. Cut two pieces of Window Scenes Paper Collection to 5 7/8 x 5 7/8”, edge using Archival plum ink and adhere one to the inside of the card and one to the front of the card base. Using the outer die from the Sweetheart Borders die set, cut the bottom front of the card.

Diecut the decorative Sweetheart Border from white cardstock. Sponge with dries clear glue and sprinkle with Rajni Chawla’s crystal clear glitter. When dry, adhere to the card front.

Stamp the large and small Wild Roses on Deluxe Flower Shaping paper using Archival plum ink. Color using magenta Hue ink, diecut using coordinating dies and ink the edges using plum ink. Shape using 3D Wild Rose molds. Sponge with dries clear adhesive and sprinkle with crystal clear glitter. Adhere Power Outage Prills to the flower centers using dries clear adhesive.

Stamp the Wild Rose leaves and the Leafy Accents leaves on Deluxe Flower Shaping paper using Bamboo Leaves ink, color with the same ink, diecut using coordinating dies and shape using the 3D flower shaping molds. Sponge with dries clear adhesive and sprinkle with crystal clear glitter.

Adhere the flowers and leaves to the card front using a hot glue gun.

Other Products: Scoring board, die cutting machine, white card stock, Zig Real Brush pens

For more tips on creating with the Cascading Petals Collection watch the tutorial at https://youtu.be/DqhvfrsTI00.

For more ideas on creating with the 5 x 7 Decorative Frame Dies, watch the tutorial at https://youtu.be/qdBFA5VpmSo.

For more tips on creating with the Wild Aster Collection watch the tutorial at https://youtu.be/1mriCKqh-Ac.

Instructions: Make a 6 inch square top folding card base. Add light pink background paper from paper collection a little smaller than card base. Cut the mat layer die cut from luxe gold paper from decorative circle die set. Cut out a circle from the centre using the circle die. Cut the decorative circle design in white card stock and cut out a circle from the centre using a circle die that is smaller than the gold mat circle. Add a pattern paper circle on the gold layer. Now adhere the decorative circle die cut on this.

Cut a die cut in luxe gold from the paper from the inner tag of Elaborate ovals die set. Cut the decorative design in white card stock. Adhere this on the gold mat layer. Stamp the sentiment on a small circle die cut and mat on gold circle die cut. Adhere to the card centre.

Stamp the aster flower in plum on flower shaping paper three times for a flower. Colour with a blend of vibrant fuschia and plum ink. Shape with groove golf tools and add prills in the centre. Stamp the Wisteria petals, leaves and bird images on deluxe flowers shaping paper. Colour with Zig markers and Archival ink and shape the leaves and flowers on foam pad using golf tools. Add prills on the flowers. Arrange the flowers and leaves on the card front. Add the floral bird image with foam tape.

Arrange the flowers, bird image, wisteria leaves and flowers on the card front.

Other Products: Ribbon, Ranger Distress Peeled Paint,

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: Cut white card base and fold with dimensions of 7 1/4" x 5 1/4". Die cut a rectangle using Eyelet Rectangle & Basics Die HCD2-7189 with approximate dimensions of 7" x 5" from HCDP1-2114 French Cottage and glue. Cut alternately from golden paper and paper from the frame collection from the set HCD1-7309 Elaborate Oval Frames and glue.

To create rose shaped flowers, stamp the Large Wild Rose and Small Wild Rose on the Deluxe Flower Shaping paper a few times using Ranger Archival Ink Rose Madder, then shadow with the same ink and die cut using the coordinating die. Cover them with Rajni Chawla's Crystal Clear. Arrange the leaves and flowers on card and glue. To create leaves, stamp the Leafy Accents Cling Stamp Set on the Deluxe Flower Shaping paper with Distress Peeled Paint ink, die cut with the coordinating die, shade using this same ink. Shape leaves using 3D Leafy Accents Shaping Mold. Stamp the image from Wild Aster Spray Cling Stamp Set on white paper using Archival Ink –fern green. Die cut using matching die from Wild Aster Spray Die. Color with pink ink.

Glue all the elements as shown and add ribbon.

Other Products: Watercolor paper; Die cutting machine;

For more tips on creating with the Cascading Petals Collection watch the tutorial at https://youtu.be/DqhvfrsTI00.

For more ideas on creating with the 5 x 7 Decorative Frame Dies, watch the tutorial at https://youtu.be/qdBFA5VpmSo

For more tips on creating with the Flowering Dogwood collection, watch the tutorial at https://youtu.be/gI8RqHAt3vE.

Instructions: Start with 11 x 8 1/2” white cardstock then fold in half. Place die on folded card off the fold about 1/2”. On another piece of white, cut with same die to make a full cut. Glue the full die cut onto folded card base matching sides and bottom. Cut the next die in the set out of the white and adhere to the card. Cut one more from the set, ink the edges with the Manganese Blue ink, add foam dots to the back and adhere to the card.

Stamp the Leafy Accent leaves on the Deluxe Flower Shaping paper with the Emerald Green ink, lightly color with the same, cut out with the coordinating die, ink the edges with more of the same ink applying more pressure, place in the matching mold and run through the die cutting machine.

Stamp the dogwood flowers on the Deluxe Flower shaping paper with the Bright Tangelo ink, color in using one of the Zig Markers, cut out with the coordinating die, shape with the Deluxe Flower Shaping tool kit.

Stamp the Bird from the Floral Song set on the watercolor paper, color with the Zig makers, cut out with the coordinating die, add foam dots to the back and adhere to the card. Add the leaves and flowers around the bird. To finish, add Crystal drops to the center of the flowers and glitter to the leaves, flowers and bird.

Other Products: Ranger Distress Ink –Wild honey, Ranger Distress oxide –spiced marmalade, Ribbon

For more ideas on creating with the Decorative Royale Square & Circle Dies, watch the tutorial at https://youtu.be/tqmtn_TiVVw.

For more tips on creating with the Window Scene cards & dies, watch the tutorial at https://youtu.be/LnM95GR92ao.

For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.

Instructions: Card size is 6” x 6” on white cardstock. Cut the largest square from the HCD1-7281 Stairway Gardens Die set from the paper collection and adhere to the base. Cut a rectangle from the paper collection from the HCD1-7282 Eyelet Royale Die set and stick it to the base on the right.

Cut the HCD1-7271 Rounded Window Frame Die from white paper and adhere it in the center of the base. Cut the HCD1-7283 Courtyard Elegance Die circle paper from the collection and glue it to the base.

To create flowers, stamp the Oakberry Lane Blossoms Cling Stamp Set on the Deluxe Flower Shaping paper a few times using Distress Ink Wild honey then ink shadow using Distress Oxide Spiced marmalade ink and die cut using the coordinating dies. Shape using 3D Blossoms Shaping Mold. Use a paper piercer to make a hole in the middle and pull through the yellow stamens from the Pastel Bead Stamens-Medium set. Layer the petals together using the hot glue gun making sure to offset them. Add a little hot glue to the underside of the flower to adhere.

Stamp Leafy Accents leaves on the Deluxe Flower Shaping paper with Ranger Archival Ink Pad - Fern Green ink, die cut with the coordinating die, shade using this same ink. Shape leaves using 3D Leafy Accents Shaping Mold. Arrange the leaves and flowers on card and glue as shown.

Cut a sentiment from the paper collection. Place the remaining elements on the paper as pictured.

Other Products: Cardstock- White, Distress Oxide Ink (Fired Brick), Archival Ink (Jet Black, Coffee), Stickles- Diamond, Scrapbook Adhesives by 3L (3D Foam Squares, Dual Tip Glue Pen, E-Z Runner Ultra, Adhesive Dots Micro)

For more tips on creating with the Candy Cane Cottage Collection watch the tutorial at https://youtu.be/8Twf2bi7Lgk.

Instructions: Add the printed card front as your base. Adhere it to the 6 x 6” white cardstock base. Die cut 1 of the small doilies from Butterfly Kisses from white cardstock. Adhere near the middle of the card. Stamp and die cut 2 of the cottage image using black ink (Archival- Jet Black) onto white cardstock. Stamp and die cut 1 of each using black ink onto white cardstock: penguins. Stamp and die cut 3 sets of the lights. Stamp and die cut the candy canes using red ink (Fired Brick). Stamp and die cut 1 set of the poinsettia using brown ink (Archival- Coffee). Add color to the flowers using ink and daubers (Fired Brick). Shape the flowers using the coordinating shaping mold and add Prills to the middle of the flower using a liquid adhesive. Let dry. Add color to the other images using Zig Clean Color Markers and a water brush (Light Green, Carmine Red, Cobalt Blue, Brown, Bright Yellow, Deep Green, Pink). Add color to just the snow topped roof from one of the cottage images. Fussy cut it out and adhere to the full colored image using foam squares. Add lights along the edges of the roof.

Adhere the cottage to the card using foam tape. Find and cut out the “Let it Snow” sentiment and flag one end. Adhere to the left of the cottage using foam squares. Add the remaining set of lights below the sentiment. Add the candy canes to the front of the cottage. Then add the penguins to the card using foam squares. Add Stickles to the snow and the lights. Add the poinsettia to the top corner of the card.