Other Products: White Cardstock, Hot Glue Gun, Scissors, Die Cutting Machine

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

To see how to shape the roses, watch the video at https://youtu.be/Z8P070kC3oo.

Instructions: To view a larger photo of this project, see here. Finished size of gift box including flowers is apprx. 5 3/4" x 2 1/2". Use the gift box die to cut 4 base pieces from the light green ombre patterned Classic Petunia paper. Using from the same die set, diecut square floral pattern from each one of the previously cut base pieces. Next, diecut 4 of the square floral die and smaller angular piece from the fuchsia ombre patterned paper. Using from HCD1-7121 Elegant Border Basics, diecut the thank you from same paper and trim with scissors. Sponge edges of the gift box base, pieces and thank you with Berrylicious ink. Assemble the box as shown in the tutorial. Attach the pieces onto the gift box as shown.

Stamp the rose leaves 2x from HCPC-3753 Classic Rose Vines stamp set in Dark Brown ink onto white cardstock and diecut with coordinating die. Stamp the large set of 2 roses 2x and set of 6 roses 1x from HCPC-3752 Classic Rose stamp set in Dark Brown ink onto white cardstock and diecut with coordinating dies.

Use the Stack and Store daubers along with the following inks for the coloring. For the leaves, use Bamboo Leaves and New Sprout. For the roses, use Berrylicious on the entire petal, then shade the edges darker with the Dark Peony.

Shape the roses and leaves. Assemble the roses using the hot glue. Use glue and double dots to attach roses and leaves onto top of gift box as pictured.

Other Products: White Cardstock, Dimensional Adhesive, Scissors, Paper Trimmer, Die Cutting Machine

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: Cut white cardstock to 6 x 6 1/4 ", score and fold at 3 1/8 ". This creates a 6 x 3 1/8" size card base. Using from the Sweetheart Borders die, diecut the outline from card base, overlapping slightly on folded edge. Sponge edges of card base with Butter ink. Using from the same die set, diecut the large border pattern from pink Heartfelt Love paper. Sponge the large border with Berrylicious ink. Using from the Eyelet Hearts die, diecut the largest eyelet heart from white cardstock. Use the largest plain heart to cut from within eyelet heart. Stamp Because I Care sentiment in Tuxedo Black ink onto the center of plain heart. Sponge edges of eyelet heart border with Rouge ink. Sponge edges of plain heart with Butter ink. Lightly highlight the sentiment with Rouge ink. Use glue and dimensional adhesive to attach border and hearts onto card base as pictured.

Stamp the floral corner from HCPC-3803 Banners Of Love in Tuxedo Black ink onto white cardstock and diecut with coordinating die. Diecut 2 of the small leafy die from Cut Mat Create 1B.

Use the Stack and Store daubers along with the following inks to color. Use the Dove Blender for fine details. For the leaves, use Cottage Ivy, New Sprout and Lime Pastel. For the flowers, use a combination of Rouge, Berrylicious, Rhubarb Stalk and Butter inks.

Shape the flowers and leaves. Cut apart the floral corner into two pieces. Attach flowers and leaves onto the card as pictured. Use Dries Clear glue to add Baby's Breath glitter over flowers, leaves and rest of card as desired. Use the same glue to add Lemon Chiffon prills to floral centers.

Other Products: Smooth white cardstock, Versafine ink, Distressing tool/scissors, scoreboard, Archival ink Library Green, Olive Green and Fern Green.

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

To see how to shape the flowering dogwood, watch the video at https://youtu.be/gI8RqHAt3vE.

Instructions: Create a top fold card using smooth white cardstock measuring 6 1/2" by 6 1/2". On the side edges create a fancy edge, using Sweetheart Border Die. Repeat the process for back panel also keeping the die in the same position every time so that the borders fall back to back.

The center panel after cutting measures 4 1/2" by 61/2''. Choose a pattern paper from the designer paper collection and cut 1/8" smaller to the center panel. Distress all the four sides with a distressing tool. Sparkle the top and the edge of the pattern paper with Crystal Clear using an adhesive that dries clear.

Cut two broad fancy borders from white cardstock and trim the lacy sides and adhere them on the top panel as shown.

Cut a circle frame using Circle Basic large dies using white cardstock and layer it in the center of the card.

For flowers, stamp Dogwood flowers multiple times and cut them using their coordinating dies. Use ColorBox Fluid Chalk Ink Pad - Berrylicious to stamp and paint the flowers. For pollens, I have used Memento Dye Ink Pad - Cantaloupe. Classic Rose leaves are stamped with Library Green and cut using the coordinating die. Leaves are then painted using Archival Leaf green and Olive Green and all leaves and flowers are shaped with Deluxe flower shaping kit. Sparkle all the flowers with Crystal Clear using Adhesive that dries clear.

For Butterflies, stamp the butterfly image on Vellum sheet using Versafine ink, sprinkle white heat embossing powder, dust extra powder in funnel tray and heat set it using the heating tool. Cut the image with it's coordinating die.

Once all the elements are ready, assemble the card as shown and complete the card by adding a sentiment from Heartfelt Love Sentiments.

Other Products: Ranger Silver Embossing Powder, Heart of Gold Prills, Versamark ink, Heat Gun, Ribbon

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

To see how to shape the roses, watch the video at https://youtu.be/Z8P070kC3oo.

For more tips on creating with the border dies & foldout cards, watch the tutorial at https://youtu.be/wxX94X84kUo.

Instructions: Cut a piece of white cardstock at 10" x 7", score at 5" along the long side and fold for a base card of 5" x 7". Cut a piece of pink heart ombre paper 5" x 7" and using the cutting die from the Classic Border basics die set die cut both ends of the paper as shown. Die cut the eyelet edge from the white cardstock and adhere to the edges of the patterned paper with dries clear adhesive as shown. Adhere all the paper to the base card as shown.

Die cut the largest eyelet heart from white cardstock and adhere to the base card. Die cut the second largest eyelet heart from the pink patterned paper and adhere to the white heart. Stamp the sentiment from the HCPC-3804 Heartfelt Love Sentiments Stamp set in versamark on white cardsock and heat emboss with silver embossing powder. Using the plain edge heart die die cut the embossed sentiment out and adhere to the pink heart. Add a satin ribbon bow to the top of the heart.

To make the leaves stamp the images from the HCPC-3545 Open Leaf stamp set on white cardstock with Tuxedo Black Ink. Colour in the leaves with Bamboo Leaves ink and finish colouring with the Prismacolour pencils. Die cut with the coordinating die, shape with the Deluxe Flower Shaping Kit and adhere around the base of the hearts and over the ribbon bow as shown.

To make the flowers stamp the images from the HCPC-3752 Classic Rose Cling Stamp set in Pearlescent Coral, sponge the centres with Canteloupe inks and die cut using the coordinating die. Shape the flowers using the HCST1-401 Deluxe Shaping Kit and assemble as shown and adhere to the leaves on the front as shown.

Other Products: White Ribbon, Ranger Silver Embossing Powder, Versamark ink, Foam tape.

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: Cut a base card 9" x 6 3/4" and score at 2 1/4" and 4 1/2". Score to create a z fold card.

Cut a piece of pink patterned paper 2" x 6 1/2" and adhere to the middle of the card.

Cut a piece of pink heart patterned paper 6 1/2" x 4 1/4" and adhere to the back of the card. Cut two lace borders from the HCD1-7161 Sweetheart Borders Die and adhere them to the front of the paper. Add the ribbon down the front of the lace borders and adhere on the back of the paper. Adhere the paper to the back of the card as shown.

Cut a piece of white cardstock 2 1/4" x 6 3/4". Cut a piece of pink patterned paper 2" x 6 3/4" and adhere to the white cardstock. Cut two lace borders from the HCD1-7161 Sweetheart Borders Die and adhere them to the front of the paper. Add the ribbon down the front of the lace borders and adhere on the back of the card. Adhere to the front of the card as shown.

To make the hearts die cut the second largest eyelet heart out of darker pink cardstock. Die cut the largest plain heart in white cardstock and adhere to the pink eyelet heart. Die cut the next size eyelet heart from the darker pink patterned paper and adhere to the white heart with foam tape. Stamp the sentiments from the HCPC-3804 Heartfelt Love Sentiments Stamp set in versamark on white cardstock and heat emboss with silver embossing powder. Die cut the sentiment out with the next size down plain heart die and adhere to the pink patterned heart. Adhere the hearts to the base card as shown.

Other Products: Pink cardstock, X-Press It Blending Cardstock, mounting tape, Copic Markers (Ribbon - B21, B24, B26, B37, C5, Flowers - Y00, Y11, Y15, Y35, Leaves- YG11, YG03, YG67)

For tips on creating with the border dies & foldout cards, watch the tutorial at https://youtu.be/wxX94X84kUo.

Instructions: Cut heavy white cardstock at 5 1/2 inches x 12 inches. Score at 4 1/4 in and 9 inches. Draw a light vertical line 2 inches from the outer edge of the right flap. Using the Eyelet Hearts Die, place the center of the largest plain heart die on the line and secure with repositional tape. Secure the outer portion of the heart on the cutting mat up to the line. Only the part of the heart that is to be cut should be on the cutting mat. Allow the rest of the card and die to rest freely from the end without any pressure. This is called a "partial die cut". Run the card through the die cutter and then cut the paper vertically on your light pencil line. This will allow the outer edge of the heart to be a flap over the edge of the card. Cut a pink layer at 2 1/4 inches x 5 1/4 inches and the designer paper from Heartfelt Love paper collection at 2 x 5 inches. Adhere to the left flap. Cut the left pink panel at 2 3/4 inches and adhere to the left flap. Die cut the Sweetheart Border die on white paper and weed using the Spellbinders Tool n' one. Tip the left side of the die cut to allow for 1/8 inch border around the inside of the flap. Apply Designer Dries Clear Adhesive and apply to the left flap on top of the pink layer.

Die cut a pink Eyelet Hearts Die that will nest inside the white heart as shown. Adhere the pink heart. Apply Dries clear Adhere to the inside of the heart and sprinkle generously with Mauve Gala Glitz. Allow the adhesive to dry.

Stamp the sentiment, using Banner of Love stamp set onto X-Press It paper with Memento Tuxedo Black Ink. Color the image with the following Copic Alcohol ink - (Ribbon - B21, B24, B26, B37, C5, Flowers - Y00, Y11, Y15, Y35, Leaves- YG11, YG03, YG67). You can choose any ink or medium that you prefer. Die cut with the coordinating die. Cut 3 additional pink sentiments and adhere the layers with a small strip of mounting tape between each layer. This will add great dimension. Adhere the image with some overlap on the heart.

For a final touch, cut a pink mat at 4 x 5 1/4 inches and a white layer at 3 3/4 x 5 inches and adhere to the inside of the card. This will allow a petty place for your personal message.

Other Products: Distress Inks: Forest Moss, Mustard Seed, Aged Mahogany, Dusty Concord, Mustard Seed. Pan Pastels: 470.8 Violet Tent, 680.8 Bright Yell. Green Tint. Other: Pink Card Stock, Water coloring brush, Scissors, Ruler, Paper trimmer, Black Archival Ink, Hot glue gun, Versa-mark, Fussy Cutting Scissors, Double Sided 3d Foam Tape, Misti-stamping tool.

To see how to shape the petunia, watch the video at https://youtu.be/KOy_qNB9OAk.

For more tips on creating with the foam paper & stamens, watch the tutorial at https://youtu.be/Oma6ctVmUD0.

Instructions: The finished size of this tent fold card is 5.31 in. x 5.31 in. (13.5cm x 13.5cm). Taking the white cardstock make the tent fold card base to the above measurements. For the card front 1st mat layer, take the pink cardstock, cut to 5.118 in. x 5.118 in. (13cm x 13cm). For the 2nd matting, find the pink and white design paper in the collection with the flowers and leaves, cut this to 4.92 in. x 4.92 in. (12.5cm x 12.5cm). For the 3rd matting, find the design paper in the collection with the pink heart print; cut this to 4.72 in. x 4.72 in. (12cm x12cm). Adhere the first 2 matting layers (the pink cardstock and the design paper with the flowers and leaves) using the 3d foam dots to the card front.

The 3rd matting paper with the pink hearts is stamped with the Forever Love background stamp using VersaMark and heat set with gold embossing powder. Adhere the stamped paper to the card front using the 3d foam dots. To make the banner: Find the banner stamp with no words on it in the 'Banners of Love' set, stamp the banner on white cardstock using VersaMark and heat set with gold embossing powder. Finding the stamp with the word Gorgeous on it from the stamp set 'Heartfelt sentiments' Use only the word Gorgeous, stamp this onto the banner using the black archival ink and the misti-stamping tool. Add color to the banner using the Victorian Velvet distress ink and a water coloring brush.

The flower cluster images from the Banners of Love stamp set are stamped two times with VersaMark and heat set with gold embossing powder onto white card stock. Die cut the stamped images plus 6 extra unstamped from the card stock. Adhere to one stamped image 2 extra die cuts and the other 4 extra die cuts to form 2 chipboard flower cluster images. Color both the flower clusters using the distress inks listed in the product list. Trim the image with the 2 extra die cuts so they will be adhered to both sides of the banner as seen in the card photo. The 2nd flower cluster is adhered with the 3d foam dots to the card front to the top of the banner.

Stamp the 3 Dogwood flowers with StazOn Black Ink on art foam paper and diecut with the coordinating die. Color with the pan-pastels and heat with heat tool to shape. Add the stamens to the flower centers as shown in the video. When the flowers are completed adhere with the hot glue gun to the sides of the banner as shown.

Other Products: Rhinestone brads, Ribbon, Lace, Nuvo light green, white card stock, Copic Markers- RV00,RV10,BG32,BG34,G21,G82,YG03,YG17,Y11, Distress Inks-Peacock, Liquid Pearls-light yellow, light pink, Stickles-Star Dust

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: Layout is 12 X 12". Start with 12 X 12 heavy weight white card stock as the base (I was going for a nice pink and white layout). Cut plaid paper 6" X 10.5" and use Sweetheart Border on the bottom, glue down using dries clear adhesive about 2" from right side. Cut light pink floral paper 11" X 7" and turquoise paper 11.25" X 7.25". Add sheer lace and embroidered lace to bottom side then glue down to center of page, glue pink ribbon over lace edge. Cut vertical border 1.75" 11.5" and cut left side with Border Essentials Die. Cut turquoise strip 5/8" X 11 1/2", glue lace to left side and then glue down on top of pink vertical border.

Cut white photo mat 10" X 5" and glue over the center of pink floral paper. Pick 3 favorite photos and glue to white mat. Stamp and die cut dogwood flowers (small) and the floral corners X 2 then color floral with Copic markers and sponge flowers with Peacock Distress. Add corners to photos.

Cut hearts from pink paper and white card stock. Stamp Hey Gorgeous with Peacock on an angle of white heart. Glue both to bottom of vertical border and add one stacked flower. Add pink Prills and green Nuvo dots. Add rhinestone brads top and bottom. Glue two stacked flowers on top of folded pink ribbon at top right side. Add glitter as desired to flowers.

Other Products: MDF Ring, Pearls on String, Impress Dye inkpads - Emerald and Old Rose, Ribbon, Elastic, Pink Paint Hot Glue Gun, White Cardstock

For more tips creating with the Heartfelt Love collection, watch the video at https://youtu.be/AePSIkkwaCE.

To see how to shape the roses, watch the video at https://youtu.be/Z8P070kC3oo.

For more tips creating with the Blushing Rose collection, watch the video at https://youtu.be/HVQjbz25S2I.

Instructions: Begin by painting one side of your rings in pink paint. Let this dry then cover the main side, with a sheet of paper from the Heartfelt Love Paper collection, adhere your pearl strings around all edges with your hot glue gun and thread the elastic.

Die cut 3 Sweetheart Border dies on designer paper, adhere these to the outer ring around the bottom of your dream catcher with your hot glue gun. Adhere ribbons over the top of the bottom ring about 8 inches in pinks and whites.

Stamp your Classic Rose stamp with Old Rose ink on white cardstock. Die cut and shape with your Deluxe Flower Shaping Kit. Stamp the Blushing Rose Vine from the Blushing Rose Stem stamp in Emerald Green on white cardstock. Die cut and shape. Use a hot glue gun to adhere on top of your ribbon.

Die cut one of the Eyelet Hearts and your favorite picture and glue these to the heart. Stamp the love from Banners of Love stamp in Old rose ink on white cardstock. Die cut these and add below the photo. Lastly add a couple of flowers to the top and add a hanging ribbon, apply Crystal Clear to the flowers as desired.

Other Products: Archival Ink (Vermillion , Leaf , Library Green, Plum , Fuschia Pink), Distress Ink (Picked Raspberry, Crushed Olive), Foam tape, double sided tape, Sizzix , Trimmer, vellum.

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: The final white card base measures 5.5" x 4.25" and its created in a clean and simple format. The stamping technique used is "repeat stamping" with coordinating ink colors. Make two versions of this card, one in pink and one in green. Cut a mat layer from coordinating colored cardstock 5.25" x 4" and a white mat layer 5" x 3 3/4".

Take the decorative floral stamp from the Banners of Love Stamp Set and repeat stamp with coordinating inks on the white mat layer. Start the process from the center of the card so that the spacing is equal and spreads out evenly. Once the background is created, tear a piece of vellum and adhere to the center of the white mat layer at an angle as shown. Die cut the filigree square from the Gift of Love die set using white card stock. Using dries clear adhesive, adhere the mat layers to the card base as shown and adhere the decorative square to the center of the card using foam tape. 

Stamp the banner from the Banners of Love stamp set in coordinating inks and stamp the Because I Care Sentiment from the Heartfelt Love Sentiments Stamp set in Black. Diecut using the coordinating die and adhere to the decorative square.

Other Products: Paper trimmer, scoring board, bone folder, matte board, ribbon, foam tape, Stampin up Melon Mambo cardstock, Stampin up Lemon Lime ink, Stampin Up Melon Mambo ink, Stampin Up Early Expresso ink

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: To view more photos of this project, see here. Cut one piece of black card stock 3 1/2 inches by 6 1/2 inches. Score 1 inch from the left and right edge on the 3 1/2 inches side and 3/4 inches on the 6 1/2 inches left edge side. Cut two pieces of matte board for covers at 4 3/4 inches by 6 1/4 inches. Place glue on the 1 inch border of the matte board. Place the glued area of the board onto the spine cover black card stock, aligning the corner of the board with the intersecting score lines. Repeat for the second matte board. Fold the top and bottom flaps of the 3 1/2 inches by 6 1/2 inches black card stock piece around the matte boards and glue into place. Cut two pieces of black cardstock 6 1/4 inches x 6 1/4 inches. Flip the matte boards and spine piece over. Place glue on the exposed areas of the matte boards and attach the 6 1/4 inches by 6 1/4 inches black cardstock pieces to the glued areas. Use a pair of scissors to remove the paper from each corner at a 45-degree angle. Glue the long flaps of the black card stock around the boards. Tuck in the excess paper that extends beyond the tip of each corner and glue the short flaps of the black card stock in place. Cut a piece of black card stock 3 1/2 inches by 4 1/4 inches for the inside spine. Glue this piece of black card stock into place on the inside of the card box. Use a bone folder to burnish the two spine covers together and to shape a slightly curved spine.

Cut two pieces of Heartfelt Creations, Heartfelt Love paper 6 1/4 inches by 4 1/5 inches and glue these pieces to the front and back outside covers. Cut one piece of designer paper 1 inch by 4 1/2 inches and one piece 1 1/4 inches by 4 1/2 inches. Glue these pieces to the outside and inside spine of the card box. Stamp in Stampin Up Early Expresso ink the Heartfelt Creations small heart from the Classic Wedding Roses Cling Stamp set. Color the wreath flowers with Stampin Up Melon Mambo ink and the leaves with Stampin Up lemon lime ink. Die cut the wreath with the Heartfelt Creations Classic Wedding Roses die. Stamp, color and die cut six sets of Heartfelt Creations Classic Roses. Stamp with Stampin Up Early Expresso ink and color with Stampin Up Melon Mambo ink. Shape the flowers in to small roses and rose buds. Attach the wreath and the roses to the center of the front of the card box. Die cut with Stampin Up Melon Mambo card stock two sets of each of the Sweetheart Borders Die. Attach the border pieces to the top and bottom of the front of the card box.

Score two pieces of 9 3/4 inches x 12 inches black card stock. Score on the 9 3/4 inches side at 1 1/2 inches, 2 inches, 2 3/4 inches and 8 1/4 inches. Score on the 12 inches side at 3 inches, 3 1/4 inches, 7 3/4 inches and 8 1/4 inches. Cut away from the 3 inches score line to the 12 inch line the outside scored areas on each piece of black card stock. Fold long the score lines and glue the side flaps around the back. Place glue on the back of the pockets formed and attach to the inside covers.

Cut two pieces of Heartfelt Creations Heartfelt Love paper at 5 1/2 inches by 2 3/4 inches and four pieces of paper at 5 1/2 inches by 3 1/2 inches. Attach these pieces with glue to the front top, front bottom, and bottom front of the card box inside pockets. Take the Stampin Up Melon Mambo Heartfelt Creations Sweetheart border pieces cut earlier and glue to the top front pocket panels. Cut from the Heartfelt Creations Heartfelt Love paper the Just For You and Let's Celebrate pieces and glue to the top of the die cut borders.

Cut four 8 1/2 inches by 5 1/2 inches white card stock pieces to form the cards. Score at 4 1/4 inches on the 8 1/2 inches side. Cut 4 pieces of white cardstock 4 inches by 5 1/4 inches and foam tape these pieces to the front of each card base. Cut four pieces of Heartfelt Creations Heartfelt Love paper at 5 inches by 3 3/4 inches and two pieces at 3 1/4 inches by 4 1/4 inches. Arrange the paper on each card as illustrated and glue into place. Use prills with glue to cover the middle of each flower on the cards. Tie ribbon as a border on two of the four cards.

Other Products: Archival Ink (Vermillion , Leaf , Library Green, Plum , Fuschia Pink, Black), Distress Ink (Picked Raspberry, Crushed Olive), Foam tape, double sided tape, Sizzix , Trimmer, vellum.

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: The final white card base measures 5.5" x 4.25" and its created in a clean and simple format. The stamping technique used is "repeat stamping" with coordinating ink colors. Make two versions of this card, one in pink and one in green. Cut a mat layer from coordinating colored cardstock 5.25" x 4" and a white mat layer 5" x 3.75".

Take all the sentiments from the collection and repeat stamp with coordinating inks on the white mat layer. Start the process from the center of the card so that the spacing is equal and spreads out evenly. Once the background is created, tear a piece of vellum and adhere to the center of the white mat layer at an angle as shown. Die cut the filigree square from the Gift of Love die set using white card stock. Using dries clear adhesive, adhere the mat layers to the card base as shown and adhere the decorative square to the center of the card using foam tape.

Stamp the banner from the Banners of Love stamp set in coordinating inks and stamp the I Love you Sentiment from the Heartfelt Love Sentiments Stamp set in Black. Diecut using the coordinating die and adhere to the decorative square.

Other Products: White, Green and Mauve Cardstock, Scor-Tape

For tips on creating with the Wildwood Cottage Collection watch this video: https://youtu.be/g8WLXE8hLRk.

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: To view a larger photo of this project, see here. Using the mauve cardstock cut out the box die and the decorative panel in each side. I used Designer Dries Clear adhesive to adhere the decorative panels to the box. Next, I chose a pretty piece of the paper collection and cut out the panels that are at the top of the box. Glue them down. I used score-tape to hold the box together because of its strength.

Once you have the box put together it is time to stamp the leaves and flowers and get them ready to decorate the box. I used Rosebud Memento Ink to stamp and color the flowers and Cottage Ivy Memento ink to stamp the leaves. Once you use the dies to cut out the flowers and leaves it is time to shape them with the flower shaping kit. Spray a bit of water onto the back side of the flower petals and leaves and use the stylus to burnish the back side of them. Set aside to dry.

Once everything is dry, decide on the placement and use the glue to glue everything down. Your box Is now ready to fill and give as a gift!

Other Products: Red Card Stock, White Card Stock, Versamark, Versafine Crimson Red, Versafine Vintage Sepia, Versafine Olympia Green, Chestnut Embossing Powder, Derwent Water Color Pencils (#17, #56, #21 and #47), Micro Glitter, Brilliance Ink - Pearlescent Thyme and die cutting machine.

For more tips on creating with the Classic Petunia collection, watch the video at https://youtu.be/KOy_qNB9OAk.

For more tips on creating with the Heartfelt Love collection, watch the video at https://youtu.be/AePSIkkwaCE.

Instructions: Start by cutting a piece of white card stock 10" x 7" and score in the middle at the 5" mark. Next using the smaller die from the Sweetheart Border die, die cut 1 edge for the front of your card. Next take a piece of red cardstock 8 1/4" x 7" and score at the 3 1/4" mark. Now taking the outside edge die from the larger die in the Sweetheart Borders Die, die cut 1 edge for the inside of your card and finish with the last die cut out of white card stock. Now fasten the two 5" x 7" pieces together as shown. Cut designer paper along with red cardstock and layer onto card as shown. Using the small border die, die cut red cardstock along the top and bottom and adhere to the inside.

The corner floral images, and Just For You sentiment from the Banners Of Love Cling Stamp Set were stamped on white cardstock twice using Vintage Sepia ink and die cut with the matching dies before coloring with Derwent water color pencils.

The word "LOVE" was stamped on white card stock using Versamark and heat embossed with Chestnut Embossing Powder, and die cut with the matching die and dusted with Micro Glitter.

The Petunia flowers were stamped on white card stock using Crimson Red and die cut with the matching dies before distressing with Pearlescent Coral ink and shaped with the flower shaping tools. The Larger Petunia flowers, along with the smaller one inside were stamped in Versamark and heat embossed with Chestnut Embossing Powder and die cut. Shape using the deluxe flower shaping kit as shown in video. Insert stamens in the center of the flowers as desired.

The leaves were stamped on white card stock with Olympia Green and die cut with the matching dies before coloring with Pearlescent Thyme ink. Shape using the deluxe flower shaping kit.

The Forever Love Background Cling Stamp was stamped on white card stock using Versamark and heat embossed with Chestnut Embossing Powder before lightly distressing with Pearlescent Thyme and Pearlescent Coral inks.

Layer and arrange pieces as shown and adhere. Add a string bow on the front and prills to the tiny flowers as shown.

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: Cut a 12.5" x 7.5" white card base, and fold it to create a 6.25" x 7.5" card.

From pattern paper, die cut two of the large backgrounds from the Sweetheart Borders die and from white cardstock, die cut two large Sweetheart Borders dies. Adhere these on the card on top and bottom using dries clear adhesive. Die cut two Sweetheart Border edge dies using white cardstock and adhere them on the card base as shown.

Die cut one eyelet heart shape on white cardstock and distress the edges with Rose Madder Archival ink, adhere it with foam tape.

Stamp one floral image from the Banners of Love Cling Stamp Set with Plum Archival ink on white cardstock and die cut with the matching die. Adhere on the left side of the heart die cut. Stamp word LOVE sentiment with Jet Black Archival ink and die cut with the matching die and apply glossy accent and sprinkle Crystal Clear. For final touches add heart shape pearls as shown.

Other Products: White and Red cardstock, Clear Gems

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: To view a larger photo of this project, see here. To create box, die cut 4 sides with Gift of Love Box die set from red cardstock. Use decorative inserts on all sides. Die cut 4 solid frames from white cardstock and adhere to the inside of each side, glue to box sides.

Die cut 4 of the upper panel from white cardstock and stamp the sentiment on all four. Adhere to box with dries clear adhesive.

Stamp the leaves with Olive Green, cut out, color with Eden Green, shape and adhere to one of the top folds. Stamp the flower on white cardstock with Jet Black Ink, color with Black Cherry, cut out, shape with the deluxe flower shaping kit and adhere on top of the leaves.

Add clear gems to the center of each flower in the decorative panel as shown. Add Crystal Clear to flower and leaves.

Other Products: Clear Beads, CTMH Ink (Blush, Fern, Chocolate), Silk Ribbon, Cardstock- White, Scrapbook Adhesives by 3L (3D Foam Squares, E-Z Runner Ultimate Permanent), Stickles, 1/8" Hole Punch

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: To view a larger photo of this project, see here. Die cut 2 of the Gift of Love Box sides from white cardstock. Cut another piece of white cardstock that is 2.5 x 3.5" and fold at the 1/2" mark from each end and using the 1.5" circle die cut the middle out of it. Adhere that piece in between the 2 box panels. Then adhere the bottom of the box. Punch 2 small holes in the small rectangular section of the box top.

Using the coordinating box section dies, cut pieces for the outside of the box from the pink heart patterned paper and the wide striped patterned paper. Adhere to the sides of the box. Add the K-cup. Using the 1.75" circle die, cut a piece if the red polka dot patterned paper. Adhere to the top of the box. Add silk ribbon to the top of the box.

Find and cut out the small coffee cup and the "Enjoy the Moment" sentiment from the Coffee Talk Paper Collection. Adhere to one side of the box using 3D foam squares.

Stamp and die cut 1 set of the small Classic Rose and 1 set of leaves using brown ink. Add color to the flowers and leaves with daubers using Fern for the leaves and Blush for the flowers. Shape the flowers and leaves with the Deluxe Flower Shaping Kit . Add clear beads to the middles of the flowers using 3D Crystal Lacquer. Add Stickles to the tips of the petals. Adhere 1 flower to the front of the box with the coffee cup and adhere a flower and leaves to the top of the box.

Other Products: Hot Glue Gun, Scrapiniec Leave Embellishment, Memento Luxe: Northern Pine, Electric Pink, Love Letter Red, Copic Sketch: YG05, YG09, C1, R335, R39, RV02, RV06, Bone Folder, Tim Holtz Kraft Stock Nostalgic collection cardstock, Foam (red)

For more tips on creating with the Classic Rose collection, watch the tutorial at https://youtu.be/Z8P070kC3oo.

Instructions: Take your sheet of 8.5 x 11" white cardstock, cut to 7 x10" and score on the long side at 5" to create a 5 x 7" card base. Using your bone folder press along the fold for a nice crisp crease. Once done now take one of the sheets of patterned paper from the Heartfelt Love Paper collection and cut to 4.75 x 6.75". You will adhere this to your card base and this will serve as decorative element for your card front. Now take your Sweetheart Borders die and cut using the sheet of paper from the Tim Holtz Nostalgic collection. I have used a rose colored sheet that blends with my chosen sheet of patterned paper.

Now take a sheet of white cardstock and diecut 2 heart eyelets from your Eyelet Hearts die. Now use another sheet of patterned paper and diecut a plain heart from the set. Adhere to each of your diecut hearts. To give my diecut hearts a look of popping off the page, I diecut 2 more sets of the plain hearts using foam and adhered it to the back of each heart. Then glue each heart on the card making each heart angle towards the edges.

To create the flowers, take the Classic Rose die and your foam paper using the Classic Rose cling stamp set, and stamp using the Memento Luxe ink in Electric pink. Apply each flower to your iron - this allows the foam to mold easily and roll each of the diecut flowers to give it a more realistic look. Then using your daubers ink the edge of the flowers in electric pink and the centers will be in pear tart. To finish the coloring of flowers ink the very edges using Love Letter red. Adhere the large and medium flowers on top of each other staggering the flowers. Now use your piercing tool and pierce the centers to add the rock candy stamens. Diecut and stamp the leaves from the Sunflower Accents stamp/die set. Add some coloring using your YG05, YG09 copic sketch pens. Emboss the leaves for a realistic look and add to your flowers. Diecut and color your sentiment using the copic sketch pens.

Layer your flowers between your hearts and to finish it off add your Scrapiniec leaves for a complete look.

Other Products: Smooth white cardstock, Versamark embossing ink, scissors, scoreboard, Archival ink Library Green, Olive Green and Fern Green, Vibrant Fuschia, Aquamarine, Jet Black

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

For more tips on creating with the Flowering Dogwood collection, watch the tutorial at https://youtu.be/gI8RqHAt3vE.

Instructions: The finished card measures 7" x 5". For this, Cut a white card stock 7" x 10" and score at 5" mark on the long side. Fold and make the card base. Adhere a mat layer 6.75" x 4.75" of designer paper in soft green shade using the clear glue. Cut another pattern paper with dogwood flowers 4.75" x 4" and adhere on the left side on the mat layer. Cut the lace border in white card stock and adhere on the top and bottom of this card panel.

Cut a quote from the designer paper pad and adhere on white card stock leaving 1/4 " around the border. Adhere on the card front as shown on the right side.

Stamp Dogwood flower images many times with Versamark embossing ink on vellum paper. Put white embossing powder and heat set with the heat tool. Apply aquamarine ink with a dauber at the back and front of the flowers and cut with coordinating die and shape with the flower making tool kit. Insert pollens. Make similar small flowers using white card stock and library green ink. Cut with the coordinating die and shape into smaller flowers. Apply clear glue on flowers and sprinkle glitter powder. Let them dry. Stamp classic rose leaf in library green and colour with green inks. Cut with matching die and shape them.

Stamp dogwood branch with black ink on white card stock and colour with vibrant fuschia and green colour. Cut with matching die and shape a little using ball tool. Stamp and cut a flying dove image and apply some aquamarine ink on edges and add glitter. Adhere the dove on the bottom right.

Arrange the dogwood branches on the card front as shown with clear glue. Cut a sentiment from the pattern paper in the shape of tag and adhere to the card front as shown. Arrange all the flowers and leaves on the branch and the tag as shown.

Other products: Dark Pink Cardstock, Vintage Photo Ink, Lace, Pearl Heart embellishment, Golden corner stickers, Gold embossing powder, Charm, Charm clip, Versa fine Black Ink, White Pearl pen, Distress tool, Heat tool, Glue gun, Distress Ink Vintage photo, Versa mark Ink

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: Cut a piece of Cardstock of 6 x 12" and fold it in half, then your card is 6 x 6". Cut a piece of designer paper from the Love paper Collection at 5 3/4" x 5 3/4". Use distress tool to distress all of the edges, tear your paper on the upper side, ink all your edges with the Vintage photo.

Take the Big forever Love Background stamp and stamp this with Versa mark Ink, sprinkle with gold embossing powder on top and melt this with your Heat tool. Glue a piece of lace behind the tear and glue the whole part on top of the card. Now mat your photo with 3D foam tape on a piece of cardstock which is a little bit bigger then the photo, Ink all the edges of the cardstock and the photo.

Cut out a heart with the Heart Die and then you place the bottom part of the photo in it stick a corner sticker on the left bottom corner of the photo and glue this all down on the top of the card. Tie a bow around the left side of the heart with a piece of lace and add an embellishment to it. You can also glue an embellishment on the piece of lace where you made the tear.

Now stamp some rose vines with the black versa fine Ink and color them with a mix of the bamboo leaves and new Sprout and Vintage photo, cut them out with the coordinating die and glue some rose vines on the bottom of the heart. Stamp some Dogwood flowers with Rhubarb Stalk and color them with Rose Bud very lightly and in the middle add some New Sprout. Cut them out with the coordinating die and shape them with the Deluxe Flower Shaping Kit. Make a hole in the centre and pull some stamens through it and cover them with Crystal clear. Now glue them on top of the vines. Decorate the front also with some dots with the pearl pen.

For the inside cut 2 pieces of Design paper of 5 3/4 x 5 3/4 inches, distress them and Ink them with Vintage Photo and glue the upper one down. Cut a heart from the eyelets heart dies and glue this on top of the design paper, stamp the word I love you from the Love sentiments with Versa mark Ink and put Gold embossing powder on it and melt it with the heat tool. Cut a dark pink border with the Sweetheart Border die and adhere to the center of the 2 1/2 x 8" with a strip of tape. Score this strip on both sides at 1 1/4 inch, add dries clear adhesive to the flaps, the bottom edge and the side edges, wrap the one inch flaps around the back of the 5 3/4 x 5 3/4" designer paper and adhere to form a pocket. Glue the whole thing down on the bottom part of your card base. Cut out a sentiment from the paper collection, Ink all the edges with Vintage photo, mat it on dark pink cardstock and glue it down on top of the pocket you just created. Cut a journaling card out from the design paper, ink the edges with Vintage Photo and mat this on cardstock and put it in your pocket and your card is ready to send!

Other Products: Misti, Big Shot Plus, Red Line Tape, hot glue gun.

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: To view more photos of this project, see here. Cut the Gift of Love Die four times from Clebrate the Season Paper Pad, fold at the score lines, burnish the folds with the bone folder from the Scor Pal and adhere the panels together with red line tape. Cut four of the squares and four of the top angled pieces, ink with sweet plum and adhere to the gift box using dries clear adhesive.

Stamp the leaves of the poinsettias with the Celebrate the Season and the Ornate Sleigh Cling Stamp Sets using Teal Zeal Ink, color with Teal Zeal using the Stack and Store Daubers, cut with the coordinating die and shape using the Deluxe Flower Shaping Kit. Stamp the Poinsettias from the Celebrate the Season and the Ornate Sleigh Cling Stamp sets with Sweet Plum Ink, color with Sweet Plum and Lilac Posies, cut with the coordinating dies and shape using the Deluxe Flower Shaping Kit. Adhere two of the same size petals together and then adhere to the leaves. Add a little Dries Clear Adhesive to the flower centers and sprinkle with Minnie Pearls Prills. Use a sponge to add adhesive to all of the petals and leaves and glitter with Rajni Chawla's Crystal Clear. Adhere to the box with hot glue gun .

Cut the border die from the Sweetheart border die twice from white cardstock, sponge with dries clear adhesive and sprinkle with crystal clear. When dry, trim and adhere to the bottom of the box.

Cut the presents, mittens, and ice skates from the paper pad, ink the edges with Teal Zeal and Sweet Plum, add glitter and adhere to the box as shown.

Cut a tag from the paper pad using the luggage and tags die, ink the edges, add glitter and a small piece of twine and adhere to the back of the box.

Fill the box with goodies.

Other Products: Canson water color paper; Black Archival Ink; Coffee Archival Ink; White cardstock; Foam Adhesive; Diamond Dust; Shaker glitter; sewing machine and white thread; Distress Inks: Peacock Feathers; Cracked Pistachio; masking tape

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

For more tips on creating with the Wildwood Cottage collection, watch the tutorial at https://youtu.be/g8WLXE8hLRk.

Instructions: Card Base is 5.5 x 6.5" on canson water color paper. Tape off the edges of your background paper with masking tape so we will have a white outline when we are done. Do a smooshing technique with the two distress inks using peacock Feathers and Cracked Pistachio. But do one ink color at a time and heat set in between colors. Take your ink and smoosh it on your craft mat; spritz with mater and spread the card base across it, look at your background heat set; then do again with both inks until you are happy with background color.

Ink the background stamp with black archival ink and stamp in the middle of the card base as shown. Stamp a second time on a second piece of canson water paper and cut out using the circle die. Do same smooshing technique to this piece as well. Cut the raindrops on roses on white card and a circle ring to create the top of the shaker.

Using the small heart border in the Eyelet hearts set, cut out three times and use this as part of the shaker confetti in the shaker part of the card. Assemble the shaker card once you have cut out a matching circle in clear cardstock. I did add a bit of diamond dust and shaker glitter.

To make the border ruffle, I cut three of the border from the sweethearts border die; attached all three together end to end to make one long ribbon piece. Folded in .25 inch increments and placed on bottom of the base. I then put through my sewing machine and sewed it on the bottom of the card. Wrap the end around to the back. Secure with adhesive.

Flowers: Cut and stamp 2 sets of the 9 set wildwood florals on canson water color paper using coffee ink; and stamp two sets of the classic rose vine. Cut out, color vine with cracked pistachio distress ink and the florals with peacock feathers. Pierce the center of the florals to add the stamen from the medium pastel set using the white. Mold your leaves and flowers, add stamens and complete card as shown, Detail with crystal clear and diamond dust.

Other Products: Curious Iridescent - Cryogen White Paper; Cream Seam Binding; Art Glitter Ultrafine Transparent - Lemon and Eggplant; Flower Soft - Fuchsia; The Robin's Nest Tear Drops - Beaches; Copics - C01, C03, C5, C7, RV55, Y06, YG01, YG03, YG05, YG17; Scor-Tape

For more tips on creating with the Woodsy Wonderlandcollection, watch the tutorial at https://youtu.be/TldMdgGbYkQ.

Instructions: To view a larger photo of this project, see here. To create this 4 3/4" x 2 3/4" Gift Card Holder start by using the tag die from the Snow Kissed Flakes and Die set to cut two (one front and one back of gift card holder) from the brown design paper and cut one (to adhere to the back panel) using the design paper with the flowers and butterflies. Adhere flower/butterfly paper to back tag with Dries Clear adhesive and sponge edges of brown design paper of both tags with Dark Brown ColorBox Chalk Ink and sponge edge of flower/butterfly paper side with Bamboo Leaves Memento Ink.

Cut the bunny image to fit on the gift card front from the small rectangular design paper images and sponge edges with Bamboo Memento Ink before matting on purple design paper that has been sponged with Concord ColorBox Chalk Ink. Adhere entire image to gift card holder tag front as shown.

Secure the small circle die from the Eyelet Circles and Small Basics Die set to half of the top center of the tag front and die cut to create an easy way to remove the gift card. Sponge newly created half circle with Bamboo Leaves Memento Ink. With Dark Brown ColorBox Chalk Ink stamp the Happy Birthday sentiment from the Paw-fect Pooches Cling Stamp Set on the tag front, as shown.

On Cryogen White Paper with Tuxedo Black Memento Ink stamp the rocks/grass image from the Woodsy Wonderland Cling Stamp Set and die cut with the coordinating die. Color rocks with Copics C01, C03, C5, C7, the flowers with Copics RV55, Y06, and the grass with Copics YG01, YG03, YG05, YG17. Cut rocks/grass image as needed and adhere to tag with pop dots.

Other Products: Peacock feathers & Seedless Preserve Distress inks, Black Archival ink, Anna Griffen Pirouette Embossing folder, Art Antrology Kaleidoscope stencil, Memorybox Heartwood stencil, Ebosser, Clarity Stencil Brushes, Pick me Up, rhinestones, pearls & adhesive.

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: Take a 4" x 5 1/4" white cardstock and emboss it using Anna Griffen Pirouette Embossing folder. Adhere it on a 4 1/4" x 5 1/2" white cardbase.

Take another piece of white cardstock & ink it using Art Antrology Kaleidoscope stencil, Seedless Preserve Distress ink & Clarity Stencil Brush. Remove the stencil & align the Memorybox Heartwood stencil to the center of the inked design & ink with Peacock feathers Distress ink & Clarity Stencil Brush. Die cut this piece using Eyelet Circle and Basics Small Dies. Die cut a piece of white cardstock using the eyelet circle from the same die set & ink the edges of both the pieces with Seedless Preserve Distress ink using Stack and Store Daubers. Die cut another piece of white cardstock using Circle Basics Large Dies. Stack & adhere them together. Cut off a portion of this piece as shown & adhere to the card front with foam adhesive.

Stamp the sentiment from Heartfelt Love Sentiments Stamp Set using Black Archival ink & cut it into banner shape. Adhere it on top of the circle arrangement using foam adhesive. Add some rhinestones & pearls to the stenciled background & embossed background using Pick me Up for finishing touch.

Other Products: Festive string, Eyelet Pliers Hole punch

For more tips on creating with this collection watch the tutorial at https://youtu.be/kmqAVM6ibfM.

For more tips on creating with the foam paper & stamens, watch the tutorial at https://youtu.be/Oma6ctVmUD0.

Instructions: To view a larger photo of this project, see here. To create box, die cut 4 sides with Gift of Love Box die set from Winter's Eve Paper Collection and glue it using Designer Dries Clear Adhesive. Die cut 4 more decorative outer frames from this same paper collection, glue to box using 3D foam tape. Die cut 4 small panels from Winter's Eve Paper Collection, glue to box using 3D foam tape. Decorate with flowers, the red numbers and festive red/white string on the top as shown.

To create flowers Stamp the Botanical Rose Cling Stamp Set (medium and small) on foam paper with black Archival ink and cut using the coordinating dies. Colour with bright red pigment ink using sponge. You will need two petals for each flower.

Use an iron or heat gun to heat the petals and then shape using your fingers.

Use a paper piercer to make a hole in the middle and pull through the red stamens from the Bright Pearl-Medium set. Add a little hot glue to the underside of the flower to adhere. Using a paint brush, paint ready flower with Designer Dries Clear Adhesive and sprinkle Crystal Ultrafine Transparent Glitter

Stamp the leaves from the Window Box Fillers Stamp Set on white paper with light green Archival ink, colour using this same ink, cut out with the coordinating die and shape. Adhere the flowers and leaves to the box using a hot glue gun.