Instructions:

The ready top-fold card base measures 6 x 8" in size on ivory card stock. Using sheet 2B and 11B from HCDP1-2126 - Sweet Magnolia Paper Collection, cut mat layers with size 5 1/2 x7 1/2 inch in size, round the corners and adhere them on the front and inside panels of the card. Using HCD2-7337 - Teardrop Lattice Gateway Die, cut 2 pieces of the large decorative frame on ivory card stock along with a plain mat layer using sheet 11B. Adhere the frame die-cuts together and layer it with the mat piece to the card base using dimensional tape. Using the smaller decorative piece from the same Teardrop Gateway die, cut 1 piece with ivory cardstock and trim off the lower part of the die-cut leaving just the top portion. Adhere this to the top of the frame with hot glue as shown. 

For the flowers, stamp few images of the medium sized petals with HCPC-3986 - Wild Poppy Cling Stamp Set on vellum sheet using white pingment ink and heat emboss using white embossing powder. Color the petals using Seedless Preserves oxide ink and cut them using the coordinating dies. Shape and stack the petals with 1 small and 2 large petals for each flower and add white micro pearls for the centers.

For filler flowers, stamp several images of HCPC-3911 - Wisteria Petals Cling Stamp Set with Magenta Hue ink on flower making paper. Color the petals using the same ink and cut them the coordinating die. Shape the petals and add small white beads for the centers. Sponge some dries clear glue on the petals of each of the flowers and add Crystal Clear glitter.

For the leaves, stamp several images of HCPC-3835 - Leafy Accents Cling Stamp Set with Fern Green ink on flower making paper. Color them using the same ink, cut them using thier coordingating die and shape them using the corrdinating shaping mold. Arrange and adhere all the ready elements on the card front using hot glue. Add the sentiment stamped and heat embossed on vellum strip with HCPC-3843 - Special Birthday Sentiments Cling Stamp Set using Seedless Preserves oxide ink and clear embossing powder respectively. Use similar color brads on either end of the sentiment strip and adhere it to the card front as shown.

Finally add some iridescent beads randomly around the flower arrangement to finish off the card.

Other Products: Ivory card stock, white micro pearls, small white beads, Iridescent beads, brads, Seedless Preserves Oxide ink, Clear embossing powder, dimensional adhesive, hot glue, hot glue gun, funnel tray, scissors, paper trimmer, die cutting machine, scoring board

Instructions:

The ready top fold card measures6 1/2” x 6 1/2”. Choose the pattern paper from Mushroom cottage paper collection and cut it to the size 6 1/4” x 6 1/4” and glue it on the card front. Cut a white die cut using Stairway Gardens Die. Cut a coordinating paper from the same collection, a little smaller to the die-cut so that the white edges are shown. Adhere this panel on the ready card base using glue.

Cut two decorative pieces from pink card stock and gold card stock using Elegant Heart Centerpiece die. Glue both together, slightly offset, and adhere on card using foam tape. Cut an octagon piece from same designer paper using die and glue it on the decorative pieces as shown. Cut one more decorative piece from gold card stock using Elegant Heart Centerpiece die, trim the edges of die cut and removing the centre to create an aperture. Adhere it on the card using foam tape.

For fairy use a masking tape and stamp only the wings of fairy from Mushroom Fairies Cling Stamp Set on a smooth white card stock using Versamark and heat emboss it using Soft Lilac nuvo embossing powder. Next, again use mask sheet and stamp the body of fairy using Intense black ink pad by Hero Arts. Ready extra wings from the same stamp set. Now stamp the other images from Large Mushroom Cottage Cling Stamp Set, Mini Mushroom Cottages Cling Stamp Set and Mushroom Cottage Accents Cling Stamp Set on smooth white card stock using Intense Black ink pad by Hero Arts. Color all the images using Zig markers and cut them using their coordinating dies.

For flowers, stamp the flowers from Fragrant Hyacinth Cling stamp set on Deluxe Flower Shaping Paper using Lilac Posies memento ink and color them using same ink. Cut flowers using their coordinating dies and shape them using their coodinating shaping mold. Add pastel pearl stamens to the center of flowers.

Stamp the leaves from Leafy Accents cling stamp set on Deluxe Flower Shaping paper with Archival Fern Green ink and color them using Archival Leaf Green ink and Archival Vivid Chartreuse ink. Cut the leaves using their coordinating dies and shape them using coordinating 3D shaping mold.

Now add all the elements to the card as shown. Also cut a sentiment from designer paper and add to the card using foam tape. For final look, apply Crystal Clear powder using Art glitter dries clear glue to add shine.

Other Products: Smooth white card stock, dimensional tape, hot glue, hot glue gun, Hero Arts intense black ink pad, scoreboard, hot glue, hot glue gun, soft lilac nuvo embossing powder, versamark watermark stamp pad.

Instructions:

Card size: 4 x 8 1/4". Start with white cardstock measuring 8 1/4" x 8”, score and fold to make 4 x 8 1/4” card. Unfold then place an oval die 2 1/2" x 4” in the center of the front half of card, run through a large die cut machine or fold bottom part of card under the cutting plate so that it doesn’t cut. Cut a piece of blue cardstock to 3 3/4"X 8”, cut the oval from the blue then run the blue panel through the machine with an embossing folder (this folder was made for slimline cards). Glue the embossed panel onto card front matching all edges. Cut a white oval frame for the opening using 2 oval dies 1 size apart (this takes both sets, small and large to accomplish). Glue the frame onto opening.

Inside card, cut a blue decorative paper panel to 3 3/4" x 8”, stamp the center with a sentiment, using Black, so that it shows in the center of the closed card. Make another white oval frame, glue it around sentiment. Glue the panel inside then set the card aside.

Stamp Leafy Accents using Fern Green, sponge with Leaf Green, die cut then shape in the Leafy Accents Mold. Lacquer them then cut them apart.

Stamp the Wild Rose Blossoms using Cactus Flower, sponge with Magenta Hue, die cut then shape in the mold. Glue 2 of the same size together for each flower. Using the Deluxe Flower Shaping Kit, make a well in the center of each flower, pierce the centers. Using one of the EZ Stems, attach each flower by inserting end of stem then fold stem over using small plyers, glue in place with hot glue.

Attach leaves all over all stems as desired using hot glue. At this point you can blend the color or the leaf stem and the EZ Stem with a green Copic Marker or other marker if you want to.

Fill the centers around the green folded stem, with adhesive then fill with Prills. Glitter the flowers (Leaves should already be lacquered).

Add pearls to all intersections on the embossed design on card front then use hot glue to attach the stem with flowers. Bend stems to desired look then hot glue a white multi-looped bow onto stem.

Optional: You can finish by adding glitter randomly to the inside of card.

Other Products: White cardstock, blue cardstock, pearls, embossing folder for slimline, 1/16" white ribbon, hot glue

Instructions:

Click HERE to view the video tutorial for the Sweet Peas. Click HERE to view the video tutorial for the card. Click HERE to view the video tutorial for the Dragonfly.

Cut a 5" x 5" sheet of pattern paper from Decorative Dragonfly Paper collection and adhere it on a same sized card base. Die cut a piece of Deluxe flower shaping paper using the dies from French Courtyard die set. Modifly the die cut as shown and adhere the resulting 4 pieces and the circle piece on the card base. 

Ink a sheet of art foam paper on both sides with Cactus flower and Manganese blue archival inks and stamp the petals from Sweet Pea cling stamp set on it using the same ink. Ink a sheet of art foam paper on both sides with Sunflower and Leaf Green archival inks and stamp the leaves and calyx from the same stamp set on it using Olive archival ink. Ink a sheet of art foam paper on both sides with Sunflower archival ink and stamp the calyx on it using Monarch Orange archival ink. Die cut all the images using the matching dies from Sweet Pea die. Shape the flowers, leaves, calyx and buds using iron, hydra sponge, 3D Sweet Pea shaping mold and Deluxe Flower shaping kit. Add a yellow stamen from Bright pearl stamens to the yellow flower centers.

Stamp the images from Vining Sweet Pea cling stamp set on a piece of Deluxe Flower Shaping Paper using Leaf Green Archival ink and ink them with the same ink. Die cut them using the matching dies from Vining Sweet Pea die. Cut off the flowers and shape the leaves using Deluxe Flower Shaping kit. Glue this along with the flowers, leaves and buds on the card front as shown.

Stamp the dragonfly image from Decorative Dragonfly cling stamp set on a piece of vellum using VersaColor white pigment ink and heat emboss it using white embossing powder and heat tool. Die cut it using matching die from Decorative Dragonfly die. Ink it from the back using Vibrant Fuchsia and Manganese Blue Archival inks and Stack and Store Daubers and adhere it on the card.

Adhere a few rhinestnes to add finishing touch.

Other Products: Scissors, iron. hot glue gun and rhinestones.

Instructions:

Take a 9” x 7” piece of white card, score and fold at 4.5” to create tent fold card base. Place the largest elegance frame die so that it overlaps the fold and run through the diecutting machine to create a shaped card. Die cut the largest elegance frame die using white card and paper from the collection. Layer together and adhere to the card front.

Die cut the largest decorative frame die using luxe silver card and adhere to the card base using foam pads. Die cut the middle decorative frame using paper from the collection and adhere to the centre of the luxe silver diecut.

Stamp the sentiment onto white card using sweet plum ink, diecut using the largest plain oval. Adhere to the centre of the card using foam pads and add 3 coloured pearls under the sentiment.

Stamp the roses onto vellum using veramark, cover in white embossing powder, remove excess and heat to set. Die cut and gently shape using the flower shaping tools. Layer 2 sets of petals together, place a blob of hot glue in the centre of the flower and add prills whilst the hot glue is still warm.

Stamp the leaves onto flower shaping paper using bamboo leaves ink, colour using new sprout ink and add a fine hint of lilac posies to the centre of the leaves. Die cut, place face down into mold, spritz with water and run though the die cutting machine to shape.

Position the flowers and leaves at the top of the sentiment and hot glue into place.

Other Products: White card, 3 pearl gems, foam pads, hot glue

Instructions:

The top-fold ready card measures 8″ X 5 1/2″. To prepare the card base, take a cardstock measuring 8″ X11″. on the longer side, score at 5 1/2″ and crease. Next, cut soft lilac paper from the designer paper collection, measuring 7 1/2′ by 5″. Also, cut 2 white die cuts using Stairway Garden Die and adjust adhering it around the lilac panel as shown to form a delicate border. Layer the panel on the card base using glue dots. 

Cut all required die cuts using Royal Elegance Frame Die from the designer paper collection and Luxe Silver Cardstock. Adhere an extra white die-cut on the back to strengthen each die-cut. Layer the die cuts as shown. 

Stamp 9 Poinsettias from the Large Festive Poinsettia Cling Stamp Set using white pigment ink on Rajni Chawla's Vellum Cardstock and sprinkle white heat embossing powder. Dust extras in the funnel tray and heat set the petals using the heat gun. Die-cut the flowers using its coordinating die set. Ink the flowers using Salty Ocean and Seedless Preserves distress oxide and mist them a little. Shape the petals using its coordinating mold. Prepare 3 flowers of 3 petals each and add seed beads to the flower centers. Glitter the flowers using Rajni Chawla's Crystal Clear powder. Also, gold heat emboss the Holy Berry foliage on the green stock and cut them using its coordinating die set. 

Stamp the star from the Large Holiday stamp set on Luxe Silver cardstock using white pigment ink and sprinkle white heat embossing powder, dust extras on to funnel tray, and heat set it using a heating tool. Cut all the stars using its coordinating die.

Stamp the sentiment from the Starry Holiday Greetings Cling Stamp Set using Cactus flower and Manganese Blue archival ink and cut it using its coordinating die set. Stack a few more die cuts underneath to strengthen the die cuts. Once all the elements are ready, assemble the card as shown 

Other Products: Smooth white cardstock, Hero Arts white pigment ink, Salty Ocean and Seedless Preserves distress oxide ink, Funnel Tray, Heating Tool, Glue Dots, Seed Beads and green cardstock

Instructions:

Create a 5 x 7" card base with white cardstock. Cut a 4.75 x 6.75" piece of lavender paper from the Holiday Star Paper Collection, distress with Vibrant Violet and adhere to card front. Cut a 4.5 x 6.5" piece of blue paper from the paper collection, distress with Night Sky and adhere with foam tape.

Stamp the decorative snowflake from the Large Holiday Star Cling Stamp Set in embossing ink on white cardstock, heat emboss with silver embossing powder, cut out with coordinating die, color with blue Zig marker and adhere to center top of card front with foam tape. Heat emboss the center decorative stamp on Luxe Silver cardstock, cut out with coordinating die and adhere.

Heat emboss the snowflakes from the Large Holiday Star Cling Stamp Set in Silver, cut out with coordinating dies.

Stamp the sentiment from the Holiday Star Cling Stamp Set in Jet Black on blue designer paper, cut out with sentiment die from same set and distress with Night Sky. Cut out a sentiment die in Luxe Silver and adhere offset. Adhere to bottom right on card front.

Stamp the large poinsettia from the Small Festive Poinsettia Cling Stamp Set in Vibrant Violet, sponge with same, cut out with coordinating dies and sculpt with the Small 3D Festive Poinsettia Shaping Mold. Add silver stamens and glitter.

Stamp the holly from the Small Festive Poinsettia Cling Stamp Set in Olive, sponge with Vivid Chartreuse, cut out with coordinating dies and sculpt with the Small 3D Festive Poinsettia Shaping Mold. Add glitter.

Adhere poinsettias, holly and snowflakes as pictured.

Other Products: White cardstock, embossing ink, silver embossing powder

Instructions:

Cut a 6 x 12” card base and score at the 6” mark to form a basic 6 x 6” card base. From the HCDP1-2110 Calla Lily Paper Collection choose a soft lavender 6 x 6” paper panel and with the HCDA2-450 Stack and Store Daubers, ink the edges with Deep Purple Archival ink. Glue this panel to the card front. Using the HCD1-7398 French Courtyard Die, cut 2 of the largest dies, once in white cardstock and once in HCGP1-493 Luxe Silver Cardstock. Glue these together using Dries Clear Adhesive so that the white is on top and the silver is offset underneath. From this same die set, create the center medallion by cutting the smallest circle die and the medallion die together out of Luxe Silver Cardstock. For the purple happy birthday layer, use 3 dies together; the happy birthday die along with both circle dies, one smaller and one larger. Lastly to create the silver that lies behind the happy birthday sentiment, remove the happy birthday die from the 3 dies in the previous step and just cut the 2 circles together. (Hint: It is best to use lots of tape to secure dies from moving when working with multiples). Glue the purple happy birthday sentiment to the Luxe Silver ring created and add 3D pop dots to the back. Glue down the center medallion flat against the card base using the sentiment as a guide to center. Then attach the sentiment.

Stamp the Roses 3x in Deep Purple Archival Ink from HCPC-3906 Small Wild Rose Cling Stamp Set. 3 medium and 4 small flowers will be needed to complete the card. With a makeup sponge applicator brush, ink the centers lightly with Tea Rose Archival Ink and then cut with coordinating dies. Using the Stack and Store Daubers ink the edges of each petal with Blue Violet Archival ink and run through the coordinating 3D Mold. Using the Deluxe Flower Shaping Kit use a circular motion with the stylus tool and press down into the center of each petal center. Lastly poke a hole in the center of each flower using the Grooved Golf Tools. For the Large Flower alternate 3 petals and use the Medium Pastel Stamen in the center. Using hot glue, glue in place. For the smaller flowers alternate 2 petals and use the Small Pastel Stamens and also secure in place with hot glue.

Stamp the smaller flowers 1 time using the HCPC-3900 Cottage Garden Hydrangea Cling Stamp Set. This one stamp stamps multiple petals, I used the smaller set of flowers. Stamp in Versacolor White Pigment Ink onto Rajni Chawla’s Vellum paper and heat emboss with white embossing powder. Die cut with coordinating die and add Lettuce Entertain You Prills to the center with hot glue. For the leaves stamp 2xin Leaf Green using the HCPC-3835 Leafy Accents Cling Stamp Set. Cut with coordinating die and then lightly color the edges with Leaf Green.

To finish the card, simply arrange the leaves and flowers around one corner of the center sentiment making sure to still be able to read the sentiment. The glue gun was used to attach flowers and leaves. Finish the inside of the card as desired.

Other Products: Ranger Archival Ink Pad - Blue Violet, Make Up Applicator Brush, Purple Card Stock, Glue Gun, Glue Sticks, Heat Gun, Scissors, Die Cut Machine

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 12” x 12”, score at 6” along the long side and fold to create a 6” x 6” base card.  Cut a piece of purple pattern paper 6” x 6” and adhere to the front of the card.

Cut a piece of light purple pattern paper 5 3/4" x 5 3/4"and adhere to the front of the card.  Die cut two decorative dies using the No. 1 die from the HCD1-7398 – one out of Deluxe Flower Shaping Paper and one out of silver cardstock. Adhere the silver die behind the white die slightly offsetting them to allow some of the silver to show through and then adhere to the front of the card over the light purple paper.

Stamp two star images using the large star image from the HCPC-3994 Large Holiday Star Cling Stamp set in embossing ink on Deluxe Flower Shaping paper and heat emboss with silver embossing ink. Die cut the complete image using the No. 1 die from the coordinating die and the inner decorative stamped image only using the No. 2 die from the coordinating die. Sponge the complete image with Periwinkle and Violet inks and adhere to the centre of the card and decorative die as shown. Adhere the stamped image on the top of the star as shown to create a relief image.

Die cut the sentiment die out of Deluxe Flower Shaping Paper. Stamp the sentiment from the HCPC-3993 Holiday Star Cling Stamp set in Embossing and Watermark ink and heat emboss using silver embossing powder on the sentiment die cut. Sponge the die cut with Periwinkle and Violet inks and adhere to the front of the star die.

Stamp the large and small spray images from the HCPC-3959 Holly Berry Spray Cling Stamp Set in English Ivy on Deluxe Flower Shaping Paper. Colour the leaves with Leaf Green ink and die cut with the coordinating dies. Add Crystal Clear glitter to the leaves with clear gloss gel medium and a paintbrush. Adhere a large and small spray to the top left of the card and one small spray to the bottom right of the card. 

Stamp the small spray image from the HCPC-3958 Small Festive Poinsettia Cling Stamp set in English Ivy ink on Deluxe Flower Shaping Paper. Colour the leaves with Leaf Green ink and die cut with the coordinating die. Shape using the coordinating die and add Crystal Clear glitter using clear gloss gel medium and a paintbrush. Adhere to the top right and the bottom left to create a base for the flowers.

Stamp the small flower images from the HCPC-3957 Large Festive Poinsettia Cling Stamp set in Paris Dusk ink on Deluxe Flower Shaping Paper. Colour the images with Periwinkle, Violet and Magenta Hue inks and die cut with the coordinating dies. Colour the backs of the petals with Periwinkle ink and then shape using the coordinating mold and assemble with two of each size petal. Pierce the centres of the flowers and insert the silver pearl stamens and secure them with Dries Clear glue. Add Crystal Clear glitter using clear gloss gel medium and a paintbrush. Trim the stamen threads and adhere over the holly sprays with a hot glue gun – one large and two small flowers to the top left and one medium flower to the bottom right of the card.

Stamp the leaf images from the HCPC-3957 Large Festive Poinsettia Cling Stamp set in English Ivy ink on Deluxe Flower Shaping Paper.Colour the leaves with Leaf Green and English Ivy inks and die cut with the coordinating die. Colour the backs of the leaves with Leaf Green ink and shape using the coordinating mold. Add Crystal Clear glitter using clear gloss gel medium, trim and adhere around the flowers.

Stamp the small leaf spray from the HCPC-3959 Holly Berry Spray Cling Stamp Set in English Ivy ink and die cut with the coordinating die. Trim and adhere around the flowers and sprays as shown.

Add Crystal Clear glitter to purple rose hip stamens with Dries Clear glue, trim the wires and adhere around the flowers.

Stamp the small snowflake and star images from the HCPC-3994 Large Holiday Star Cling Stamp set in Hero Arts Embossing and Watermark ink and heat emboss with silver embossing powder on Deluxe Flower Shaping Paper. Die cut with the coordinating die and add some little snowflakes around the sentiment.

To finish, add some iridescent gems to the centres of the little snowflakes and on the background die.

Other Products: Clear gloss gel medium, paintbrush, hot glue gun, Ranger embossing powder - Silver, Ranger Archival ink - Violet, iridescent gems

Instructions:

Ready tent fold card measures 5" × 7". Choose a designer paper and cut a mat using largest die from the set.  Adhere it on ready card base. Cut 2 frames from designer paper and silver luxe cardstock using die from the  Flourish Companion Frame Die set. Glue both frames together and adhere it on card. Glue inside pieces of frame and adhere it on card using dimensional tape. 

Stamp Merry Christmas sentiment on white cardstock using versamark and heat emboss with black Glittered embossing powder. Cut with coordinating die. Cut 5 more pieces of sentiment and glue together to add depth. Adhere it on card as pictured. Stamp poinsettia flowers and Holly Berry leaves on deluxe flower shaping paper using versamark and heat emboss using sparkle platinum embossing powder. Cut with coordinating dies. Paint flowers using Violet archival ink and shape using shaping mold. Layer flowers and glue them. Add prills to the center of flower using hot glue.

Arrange flowers and leaves on card and glue them using hot glue. Stamp stars on white cardstock using versamark and heat emboss using sparkle platinum embossing powder. Cut with coordinating dies and glue them on card. 

Other Products: Smooth White Cardstock, Prills, Sparkle Platinum Embossing Powder, Black Glittered Embossing Powder, VersaMark, Violet Archival Ink

Instructions:

Card size 5” x 7”. Take pattern paper from HCDP1-2141 Holiday Star Paper Collection and adhere it on card base.  

Now cut one die from HCD2-7363 Holiday Snowflakes Frame die on white cardstock and luxe silver cardstock, adhere them together a little offset and adhere it to card front using foam tape.

Stamp two times star image HCPC-3993 Holiday Star Cling Stamp Set on luxe silver cardstock using versacolor pigment ink pad-white and sprinkle opaque embossing powder-white and heat it using heat tool, cut it with coordinating die. Using same die HCD1-7411 Holiday Star die, cut it on silver cardstock and adhere them togethe. From the same stamp set, stamp it again two times on white cardstock using archival ink-majestic violet and night sky, cut them with coordinating die. Assemble them together using foam tape. Add crystal clear glitter.

Stamp sentiment from HCPC-3995 Starry Holiday Greetings Cling Stamp Set on white cardstock using archival ink-majestic violet and night sky, cut it with coordinating die HCD1-7413 Starry Holiday Greetings Die. Using same die cut it on silver cardstock and adhere it with sentiment together. Cut the base of sentiment on white cardstock. Adhere it using foam tape.

Stamp star image three times from HCPC-3993 Holiday star cling stamp set on white cardstock using versafine and sprinkle silver embossing powder and heat it using heat tool, cut them with coordinating die, adhere them using designer dries clear adhesive. Add crystal clear glitter.

Stamp snowflake image from HCPC-3994 Large Holiday Star Cling Stamp Set on white cardstock using archival ink-majestic violet, cut it with coordinating die HCD1-7412 Large Holiday Star Die. Adhere them as pictured using Designer Dries Clear Adhesive.

Other Products: Big Shot Plus Machine, silver embossing powder, versafine ink pad.

Instructions:

Patterned paper sheet 1B is the background. Cut a strip of the darker purple patterned paper that is 2 x 12" and tear along one long edge and adhere to the bottom of the background. Cut a narrow little strip of the light blue patterned paper that is 0.25 x 12". Adhere to the bottom of the layout.

Using the Simply Classic Rectangle Frame Die cut the largest piece from white cardstock. Cut the next size down decorative die, cut from Luxe Silver cardstock. Adhere these together using liquid adhesive. Adhere to the right hand side of the layout using foam tape. Mat the cropped 4 x 6" photo in white cardstock and add silver photo corners to the photo. Adhere to the frame using foam tape. Add gems above and below the matted photo. 

Stamp and die cut the Holiday Star image onto white cardstock 3 times using an embossing pad and silver embossing powder. Die cut 1 as a full image. Die cut the other 2, just the small inner star image. Set aside for now.

Stamp and die cut 1 more Holiday Star image onto Luxe Silver cardstock using an embossing pad and white embossing powder. Die cut out the the middle sized star from the image. Layer the larger star for the layout with the Luxe Silver star in the middle. Use foam squares between all layers. Adhere this larger star to the left of the matted photo. Use Liquid Pearls to add dots from this star to the top of the layout like the other images on the patterned paper. I also added these dots above the matted photo, making it also look like a hanging ornament.

Add the remaining star below the word Holiday on the layout using foam squares. Add Liquid Pearl dots above this also. Add gems to the middle of some of the larger snowflakes on the printed background.

Other Products: Gems, Cardstock- White, Embossing Pad, Embossing Powder (White, Silver), Liquid Pearls- White Opal, Scrapbook Adhesives by 3L (Creative Photo Corners Silver, 3D Foam Squares, Thin 3D Foam Squares, E-Z Runner Micro, Crafty Foam Tape, Dual Tip Glue Pen, E-Z Runner Ultra)

Instructions:

Cut a piece of white cardstock to 8 1/4 x 11", score at 5.5" and fold to get a base. Cut a piece of blue paper from the Holiday Star Paper Collection to 8 x 5 1/4", another one to 7,5 x 4 3/4" and a little bigger piece of the white cardstock. Adhere them to the base. Stamp the sentiment from the Starry Holiday Greetings Cling Stamp Set in Frost White ink inside of the card, use Opaque Embossing Powder, then heat emboss it.

Stamp the big star from the Holiday Star Cling Stamp Set in French Ultramarine ink onto the white and silver cardstock, diecut with die No. 1 from the Large Holiday Star Die. Repeat the stamping and diecut with die No. 1 and 2. Adhere together as pictured. Stamp small snowflakes from the Large Holiday Star Cling Stamp Set in French Ultramarine ink onto the white and silver cardstock, diecut them with coordinating die. Adhere all elements together and to the base.

Stamp blossoms from the Small Festive Poinsettia Cling Stamp Set and the Large Festive Poinsettia Cling Stamp Set in French Ultramarine ink onto Deluxe Flower Shaping Paper, color their centers with the same ink, diecut with coordinating dies and shape with molds. Add Pastel Pearl Medium Stamens to all flowers. Stamp 10 holly leaf clusters from the Winter Wreath Accents Cling Stamp Set in Fern Green ink, color them with Leaf Green ink and cut out with coordinating die. Stamp 7 small branches from the Holly Berry Spray Cling Stamp Set in French Ultramarine ink onto Deluxe Flower Shaping Paper, diecut with coordinating die. Stamp 3 pomegranate branches and 2 berry sprays from the Winter Wreath Accents Cling Stamp Set in Frost White ink onto Vellum paper, use Opaque Embossing Powder, then heat emboss them and diecut with coordinating dies. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers, add some self-adhesive pearls and styrofoam balls.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, heat tool, white cardstock, sisal, colored pencils, self-adhesive pearls, styrofoam balls

Instructions:

Its a ready folded card measuring 9" by 6". Cut panel on Deluxe Paper measuring 8 3/4 by 5 3/4" and adhere it on the card base using dimensional tape. Cut another panel from Holiday Star Paper paper collection sheet #5A measuring 8 1/2 by 5 1/2". Cut a panel from Holiday Star Paper Collection sheet number 5A and adhere onto the card base using designer glue. Trim another panel on Deluxe Paper measuring 7 1/2 by 4 1/2" and adhere onto the card base using dimensional tape, cut another panel from paper collection sheet number 5A measuring 7 1/4 by 4 1/4" and adhere on to the panel using clear glue.

Die cut the 2 tag shapes from paper collection using Ornamental Tag Die Set add extra layer of tag underneath for the sturdiness using clear glue, add white twine in both tags and set aside.

Use 4 different size of circle dies from Eyelet Circles Die Set and cut different circles by placing 2 circles together and make circle frames, add extra layer under the frames for the sturdiness using clear glue, die cut the 3 vellum circles using single circle dies and add this circle shape under the circle frames using hot glue.

Stamp the star image from Holiday Star Die and smallest star image from Large Holiday Star Cling Stamp Set on the Deluxe Paper using Versamark Embossing Ink, cover with Silver Tinsel Embossing Powder, heat it using heating tool, die cut using coordinating dies.

For the poinsettia, stamp both smallest flower sizes on to the Deluxe Paper using versamark ink cover with white embossing powder heat it using heating tool. Die cut all images using coordinating dies. Color the flower centers using Archival Periwinkle Ink using dauber, shape the flowers using golf groove tool, and finish shaping using shaping kit, make a few flowers, add three layers of same size for making each flower. Add clear glue in the centers sprinkle pearls and glass beads. Apply clear glue on to the flowers using hydra sponge add cover with Magic Glitter Powder.

Arrange all ready elements as shown in the picture using hot glue and dimensional tape. Add blue ribbon and pearl string under the flowers to embellish the card.

Stamp the sentiment "Happy Anniversary" on deluxe card from Celebrate Love Sentiment Stamp Set, using night sky archival ink, trim the tag color the edges with periwinkle ink, add glitter on the tag edges as well, next add this tag as shown using dimensional tape.

To finish the card, add art pebbles using hot glue, smallest stars and snowflakes using clear glue, nuvo drops and pearls.

Other Products: Vellum Paper, VersaMark Embossing Ink, Silver Tinsel Embossing Powder, Nida Tanweer Magic Glitter Powder, Pearls, Pearl String, Glass beads, Blue Ribbon, Hot Glue Gun, White Twine, Art Pebbles, Dimensional tape.

Instructions:

Prepare a white card base 10 X 7", on the 10 inch side, score at 2 1/2", turn and score again at 2 1/2". This will give you the opening and make a 5 x 7" card base.

Using a piece of the Holiday Star Paper, trim 4 pieces to cover the outside flaps and the inside flaps trimming slightly smaller.

Die cut 2 of the Classic Companion Border out of white card stock. Glitter and adhere to both out side flaps. Cut 2 more pieces of the Holiday Star paper 1 1/2 inch and adhere on top of the Border pieces as shown.

Cut a piece of the Holiday Star paper slightly smaller than 5 x 7" and adhere to the center inside. Use the Holiday Star Greeting and stamp with the White Color Box ink and heat emboss with the white embossing powder. On the inside flaps stamp with the Large Holiday Star small flakes with more of the White color box and heat emboss with White embossing powder.

On Silver card stock stamp 4 of the large Holiday Stars with white color box and heat with white embossing powder. Use the coordinating die and cut out 1 complete. Use the next die down and cut the remaining 3 out. Adhere those 3 together back to back so they will fan out. Adhere to the 1 large one. Apply glue to half and adhere to the left side of the card.

Stamp the Snow flakes on more of the Holiday paper with white color box, heat with white embossing powder, cut out with the coordinating die and adhere randomly on both the front flaps to finish the card.

Other Products: Paper Trimmer, Die cut machine, White Color Box

Instructions:

My finished card size is 4" x 7 1/2". Make card base and cover with a piece of Sheet 5A of the paper Collection. I edged the paper with the Chipped Sapphire ink and set aside to dry. Let's work on the elements of the card.

Die cut the Regal Lattice Gateway Die out of white cardstock and using a Hydra Sponge and the Crystal Clear Glitter add glitter and set aside to dry. Once dry glue down on the card front.

Stamp the various stars and the words Merry Christmas in Chipped Sapphire ink and die cut. Decide on placement on the card front and glue down.

Now let's work on the colored ribbon. I used white seam binding and spritzed it with water so it would better absorb the color. Lay down some color on your craft mat and spritz with water then drag the seam binding through it. Scrunch into a ball and allow to dry. Once dry tie a bow and use Scor-Tape to adhere to the card front.

The card is ready to go and should mail with one First Class stamp.

Other Products: White Cardstock, Die Cut Machine, Chipped Sapphire Distress Ink, White Seam Binding, Scor-Tape, Misti Stamping Platform

Instructions:

Card size is 7 x 5”. Score and fold 10 x 7” white cardstock at 5” on the long side to create a tent fold card base. Cut Luxe Silver cardstock 2x at 6 7/8 x 4 7/8” and adhere one to the inside and one to the card front. Cut blue metallic cardstock 2x at 6 3/4 x 4 3/4”, adhere one to the inside of the card, dry emboss the other with a snowflake embossing folder and adhere to the card front. 

Stamp the Large Holiday Star 2x on Luxe Silver cardstock using VersaMark, cover with WOW Metallic Silver Sparkle Embossing Glitter and heat set using the Heat It tool. Diecut one complete image, then diecut 2 more times from white cardstock and adhere together with the silver on top for dimension. Diecut just the center snowflake from the second image and adhere to the full image just to add a little dimension to the center. Adhere to the center of the card front using dimensional foam strips. Stamp the snowflakes and star images from the same set on Luxe Silver cardstock using VersaMark, cover with WOW Metallic Silver Sparkle Embossing Glitter, heat set using the Heat It tool and diecut using the coordinating dies. Adhere some to the card front as shown using dries clear adhesive.

Stamp the ‘Happy Holidays’ using the Holiday Greetings Cling Stamp Set on Luxe Silver cardstock using VersaMark, cover with WOW Metallic Silver Sparkle Embossing Glitter and heat set using the Heat It tool. Diecut using the coordinating die and adhere to the inside of the card along with one of the larger stars using dries clear adhesive.

Now you’ll have a beautiful holiday card that you can mail in a regular 5 x 7” envelope. 

Other Products: Diecutting Machine, White Cardstock, Metallic Blue Cardstock, VersaMark, WOW Metallic Silver Sparkle Embossing Glitter, Snowflake Embossing Folder, Misti, Funnel Tray

Instructions:

Cut out the white base of the card and fold it to 5 3/4" x 5 3/4".Cut a slightly smaller square from the paper collection and glue to the base. Cut a 5 1/4" x 5 1/4" square from the white paper, then cut a slightly smaller square from the paper collection and adhere with Double Dots 100pc. -3D Foam Circles. 

We cut out elements from the Elegant Hearts Centerpiece Die set from white and silver paper.
Glue the silver elements underneath the white elements so that they stick out a little and adhere to the sheet as shown. Cut the smaller element out of the paper collection. Adhere it to the card with Double Dots 100 pc. -3D Foam Circles.

Stamp classic rose flowers on deluxe flower shaping paper using Archival Ink Sunflower ink, shade the middle with a pink shade and cut with coordinating die. Stamp leaves using green ink and cut with coordinating die. Paint flowers with yellow. Color leaves with green ink and shape using flower shaping mold. Layer flowers and create 3D rose.

To create leaves, stamp the Leafy Accents Cling Stamp Set using Memento Bamboo Leaves on the Deluxe Flower Shaping paper, die cut with the coordinating die, shade using Ranger Archival Ink Pad - Leaf Green. Shape leaves using 3D Leafy Accents Shaping Mold.

On a strip of paper from the collection, stamp the sentiment with brown ink and then adhere it on a slightly larger silver cardstock.

Glue all the elements as shown. Cover the flowers and leaves with glue and glitter.

Other Products: Cutting machine

Instructions:

Create 5 x 7” card base using white paper and largest Fancy Classic Oval Frame Die. To create top base, cut piece from designer paper collection using same die and place on the base of card. Die cut an outer frame from silver paper and paper collection using the decorative die from the same set and adhere to the card base using 3D foam tape for dimension.

To create flowers, stamp the Christmas Poinsettia & Holly Cling Stamp Set on white paper with Jet Black Archival ink and die cut using the coordinating dies. Colour the poinsettias with StazOn Black Cherry using a sponge dauber. You will need three petals for each flower, using assorted sizes. After colouring, place the flowers and leaves into the mold face down and run through cutting/embossing machine. Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal Clear glitter. Pierce the center and glue in some stamens using hot glue gun.

To Create the leaves, stamp Christmas Poinsettia & Holly Cling Stamp Set with Jet Black Archival ink and color using Ranger Archival Ink Pad - Olive and cut using the coordinating dies. Place the leaves into the mold face down and run through cutting/embossing machine. Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Stamp sentiment using Starry Holiday Greetings Cling Stamp Set paper collection with Embossing stamp pad - clear and sprinkle with Cosmic shimmer Embossing powder - Black Mirage and heat up to melt powder using heating tool and place onto the card using adhesive foam strips. 

Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine, Embossing stamp pad - clear, Cosmic shimmer Embossing powder - Black Mirage

Instructions:

The finished layout measures 12 inches by 12 inches. For your background use the paper #3B from Floral Frame paper. Hand-tear a piece of 7 x 12" paper (sheet #12B) from the same collection and glue it in the center. Also hand-tear a piece of 4 1/2 x 12 in the sheet 10B from Floral Banner paper and glue it in the center over the 12B. Glue your two 4x6 pictures in the center of your layout with 3D foam to give dimension. 

Stamp different kind of flowers: Clematis - Stamp onto white flower shaping paper with sun dazed ink. Diecut with the coordinating die. Place facedown into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe Flower Shaping kit tools. Glue 3 layers together. In the center of the flowers add white stamens from the bright pearl medium pack kit. French Cottage collection - Stamp onto white flower shaping paper with the night sky ink. Diecut with the coordinating die. Give further shape with Deluxe Flower Shaping kit tools. Glue 2 layers together. In the center of the flowers add a blue stamen from the bright pearl medium kit. Flower from floral frame collection - Stamp onto white flower shaping paper with the coastal coral ink and color in the center with the sun dazed yellow ink. Diecut with the coordinating die. Give further shape with Deluxe Flower Shaping kit tools. Glue 3 layers together. In the center of the flowers add a blue stamen from the assorted pearl medium kit. Wild Aster flower - Stamp onto white foam paper with the new sprout ink. Diecut with the coordinating die. Give further shape with Deluxe Flower Shaping kit tools. Glue 3 layers together. In the center of the flowers add coral see prills.  Also stamp spray from the same collection in olive ink. Die cut and color the flowers with stampin’write watermelon wonder pen.

Stamp and color in olive green leaves from the Leafy accents. Cut with the coordinating die and shape with the shaping mold.  

Put cheesecloth and sewing thread on your layout next to your picture and glue your flowers and leaves over. 

Stamp with coastal coral ink sentiment from Cheerful note sentiments kit and today’s quote.  With tour scissors contour the sentiments and ink the edge in yellow. Glue it as shown on the layout through your flowers.

For the final touch add glamour turquoise sparkles and ribbon.

Other Products: Die cutting machine Cut’n’boss, heat gun, water mister, hot glue gun, hot glue, scissors, cheesecloth, sewing thread, ribbon, archival sun dazed ink, stampin’write watermelon wonder pen, glamour sparkles turquoise

Instructions:

To make this 12" x 12" scrapbook layout, cut sheet 7B from the Wild Poppy Collection Paper Pad to 11" x 11", mat onto a sheet of black card cut to 11 1/4" x 11 1/4". Mat this onto the 12" x 12" sheet 2B, from the Wild Poppy Collection. Take a 5" x 7" photo, mat onto black card 5 1/4" x 7 1/4". Cut a piece of sheet 5A from the paper pad to 7 1/2" x 5 1/2", mat onto black card cut to 7 3/4"x 5 3/4". Cut a border strip 11" x 2" from sheet 6A, mat onto black card cut to 11" x 2 1/4", adhere to side of page. Cut the border strip from sheet 1A, mat onto a 1" strip of black card and adhere across the page. Adhere the matted sheet 5A at a slight angle on the page. Adhere the matted photo straight on.

To make the Poppies - stamp onto Deluxe Flower Shaping Paper with Ranger Archival Rose Madder ink, the Wild Poppy Stamp Set HCPC-3986, three times. Color in with Ranger Archival Pink Peony ink, using the Daubers, color both sides. Die cut with the coordinating dies. Place in the Basic Flower Shaping Mold, lightly spritz with water and run through a die cutting machine. Tap out and lightly shape with the stylus from the Deluxe Flower Shaping Kit. Pierce a hole in the centers. Glue the Poppies together in sets of three, off-set the petals as you go.  Add Pearl Black Stamens and Dark Green Medium Bead Stamens to the middle of each Poppy. Glue in place on the reverse. Make one large, two medium and three small Poppies. The small Poppies only need two layers, I made one into a bud.

To make the Wild Poppy Accents - stamp the corner piece in Ranger Archival Leaf Green Ink, onto Deluxe Flower Shaping Paper, color in with Ranger Archival Leaf Green, Pink Peony and Coffee inks. Die cut with the coordinating dies. Lightly shape with the stylus from the Deluxe Flower Shaping Kit.

Stamp out a Sentiment from the Todays Quotes Stamp Set, onto white card, in Ranger Archival Jet Black ink, die cut with the tag from the Ticket and Tag Die Set. Ink the edges in Rose Madder ink using a Dauber. Adhere to side of page. Add a small gem. Arrange the Wild Poppies and the Wild Poppy Accents on the page with hot glue. Take a sponge and Dries Clear Glue, apply over the Poppies and Wild Poppy Accents, sprinkle with Clear Glitter.

Other Products: Black card, White card, Clear Glitter, Piercing Tool, Hot Glue Gun, Paper Trimmer, Small clear gem, Small yellow sponge.