Other Products: Smooth white cardstock, Hot Glue, Die Cutting Machine, Score Board, Twine, Double Sided Tapes, Glue that dries clear, Hero Arts White Pigment Ink, White Heat Embossing Powder, Heat Gun, Funnel Tray, Embossing Folder.

For more tips on creating with the Cascading Petals Collection watch the tutorial at https://youtu.be/DqhvfrsTI00.

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: The ready side fold card from smooth white cardstock measures, 5 3/4" by 8 1/4". Choose the paper from the Wild Rose designer paper collection and cut measuring 5" by 7 1/2". Distress the edges and glue it on the white cardstock making the border of 1/16" on all sides. Dry emboss the panel using the embossing folder.

Cut 2 die cuts, one from gold and one from white cardstock using largest die from Rounded Window Frame Die and stack them together using an adhesive that dries clear. Cut 2 die cuts, one from white and one from silver cardstock using the second frame from the same die set. Stack these together too. Cut the circle die from the Circle Basics Large Die and distress it using Vibrant Fuschia Archival Ink. Cut these doilies in half and layer them as shown, a little sideways to each other. Cover the center with the organza ribbon.

Stamp a few Wisterias with leaf green and Cactus Flower Archival ink and cut them using coordinating dies. Color the centers and shape them using Deluxe Flower Shaping Kit. Add Delicate glitter beads to the centers.

For the wild roses, stamp the flower petals using Vibrant Fuchsia Archival ink and Small Wild Rose Stamp set and cut them using it's coordinating dies. Ink the flowers using Vibrant Fuchsia and Leaf green and shape them using the coordinating mold. Once the shaping is done, assemble few flowers using ball tools from the shaping kit and add prills to the flower centers.

For vellum leaves, stamp 2-3 images with white pigment ink on the vellum, sprinkle white heat embossing powder, dust extras, and heat set. Cut the images using a coordinating die set and color them using leaf green distress oxide. Also, shape them using needle tool.

Once all the flowers are ready, form a bouquet of flowers using Wisterias and Wild Roses. Randomly add glitter to enhance the entire project and finish the card using a sentiment from the same collection. Add small bow using twine on the left side peeking through the flowers.

Other Products: White Cardstock, Gems, Distress Oxide Ink (Shabby Shutters, Sugar Spun, Picked Raspberry), Scrapbook Adhesives by 3L (Adhesive Dots Small, Dual Tip Glue Pen, E-Z Runner Grand, 3D Foam Squares)

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: Find and cut out the 6 x 6” card background and trim all edges slightly. Mat this in the dark plum patterned paper and adhere both to a 6 x 6” white cardstock card base. Die cut the 2 Butterfly Kisses die pieces from white cardstock. Adhere the square frame directly to the background and the circle piece using foam squares. Find and cut out the “Birthday Wishes” sentiment, and mat that in dark green patterned paper. Adhere together and adhere to the middle of the card using foam squares.

Stamp and die cut 1 set of each size of the small wild rose images onto Deluxe Flower Shaping Paper using dark pink ink (Picked Raspberry). Add color to the flowers using ink and daubers (Fossilized Amber, Sugar Spun). Stamp and die cut 2 sets of the Leafy Accents image using brown ink onto Deluxe Flower Shaping Paper. Add color to the leaves using green ink and daubers (Shabby Shutters). Shape the flowers and leaves using the coordinating shaping molds. Assemble the flowers and add Prills to the middles of each using a liquid adhesive. Let dry. Add flowers and leaves to either side of the sentiment. Add gems to the corners of the card front.

Add flowers and leaves to either side of the sentiment. Add gems to the corners of the card front.

Other Products: Distress Oxide Ink (Picked Raspberry, Fossilized Amber, Sugar Spun, Shabby Shutters), Beads, Cardstock- White, Scrapbook Adhesives by 3L (Dual Tip Glue Pen, E-Z Runner Grand, 3D Foam Squares, Adhesive Dots Small)

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: Find and cut out the card front background and cut a mat for it from dark green patterned paper. Fussy cut the floral border and set aside, adhere the rest to a white cardstock card base. Find and cut out the “Birthday Blessings” sentiment and flag one end. Set aside. Cut the Decorative Accents die from white cardstock. Adhere the fussy cut florals to the edge of this die cut piece and adhere to the edge of this card using foam squares. Add the sentiment to the bottom of the card using foam squares.

Stamp and die cut 1 set of the large and 2 of the small wild rose images onto Deluxe Flower Shaping Paper using dark pink ink (Picked Raspberry). Add color to the flowers using ink and daubers (Fossilized Amber, Sugar Spun). Stamp and die cut 1 set of the Leafy Accents image using brown ink onto Deluxe Flower Shaping Paper. Add color to the leaves using green ink and daubers (Shabby Shutters). Shape the flowers and leaves using the coordinating shaping molds. Assemble the flowers and add beads to the middles of each using a liquid adhesive.

Add flowers and leaves up the border of the card.

Other Products: off white cardstock, Flat back pearl, versamark, hot glue,

For more tips on creating with the Wild Rose Collection, watch the tutorial https://youtu.be/2ALPhFnT-qI.

For more ideas on creating with Decorative Royale Square & Circles Dies, watch the tutorial at https://youtu.be/tqmtn_TiVVw.

Instructions: Ready gate fold card measures 6" × 6". Take a piece of off-white cardstock measuring 6" × 6.5". Score at half inch on longer side. Place Courtyard Elegance die and a circle die and run through die cutting machine. Now place circle die from Courtyard Elegance die without removing other dies. Run it half through die cutting machine. Fold in half and glue it. Make 2 similar pieces. Take a piece of off-white cardstock measuring 6" × 6", glue both diecuts and create a gate fold card. Cut a piece of gold cardstock measuring 5 7/8"×5 7/8". Adhere it inside the card.

Cut eyelet circles of different sizes from gold cardstock and off white cardstock using Decorative Circle Frames die. Arrange circle die cuts on the center of card using foam dots as shown. Glue some flat back pearl using clear dry glue.

For Flowers, stamp small size stamp of Large Wild Rose flower and stamp biggest size of Small Wild Rose on Deluxe flower shaping paper using magenta hue ink and cut with coordinating dies. Paint flowers using same ink. Shape flowers using deluxe flower shaping kit and pierce the center. For the center of flower, I used Rock Candy Stamens. Glue layers of flower to make a full bloom. For 1 flower I use 2 pieces of big one and 2 pieces of small one. Stamp Wild Rose leaf and Wild Aster leaf on Deluxe Flower Shaping Paper using olive green ink and cut with coordinating dies. Paint leaves using leaf green and olive green ink and shape using flower shaping mold. Arrange all the elements on card in desired manner and glue them using hot glue.

For finished look, apply Crystal Clear on flowers and leaves using Art Glitter clear dry glue.

Other Products: Die cutting machine Cut’n’boss, heatgun, cheesecloth, Gutermann sewing thread, water mister, hot glue gun, hot glue, scissors, ribbon, stampin’up ink chocolat chip and pistachio pudding, nuvo embellishment mousse cosmic brown, paper twine cording, Queen and Co more goosebump, prima trim lace, making memories stickers, berry from florist material, sewing machine

To see how to shape the flowering dogwood, watch the video at https://youtu.be/gI8RqHAt3vE.

Instructions: Take a pink paper from the Wild Rose collection and cut it to have a 11 x 11 inch square. Lightly distress the edge with a tool designed for this purpose or simply use the blade of a scissor. Glue this paper on a 12 x 12” green paper from the same collection. Stitch with white thread all around pink paper.

Take a pink paper from the Wild rose collection and cut it to have a 5 1/2 x 3 1/2 inch rectangle. Lightly distress the edge with a tool designed for this purpose or simply use the blade of a scissor. Do the same thing with a 6 x 4 inch green paper. Glue those papers on each other and paste your picture on it. Cut 2 swirls from the Ornemental Tag die in the white cardstock paper and glue it on each side of your picture. Glue it in the center of your 12 x 12” paper with 3D foam to give dimension.

In the two papers used previously, cut two tags of different sizes (from ornemental die) that you will glue one on the other with 3d foam. Paste your title on it. Glue it under your picture with 3d foam.

Make a lot of leaves with the leafty accents products. Stamp using chocolate chip ink onto white flower shaping paper, colour the rest of the flower using pistachio pudding ink. Diecut with the coordinating die. Place facedown into the flower shaping mold, spritz with water and run through the diecutting machine to shape. Put cheesecloth under the picture and glue those leaves over the cheesecloth.

Make a lot of Dogwood flowers. Stamp using pistachio green ink onto flower shaping paper, colour the centre with brown. Diecut with the coordinating die. Give further shape with Deluxe flower shaping kit tools. Shade the edge of the flower using nuvo cosmic brown. Poke a hole in the centre of the flowers and add stamens, secure with hot glue. Do the same thing by using the pink color this time.

Glue all the paper all around the picture and the title. Add spring wire, lace, sewing thread and goosebump. Also add berry from florists material to add the final touch.

Other Products: Organza ribbon, Gorgeous grape ink & card – Stampin Up!, 4 x polished pearls, clear embossing powder, foam pads, hot glue

For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.

Instructions: Fold an A4 sheet of card in half and cut away the bottom to create a card base slighter small than 6” square.

Cut a square of paper from the collection slightly smaller than the card base, ink around the edges and adhere to the card base.

Die cut 4 regal pockets using the gorgeous grape card stock. Adhere into the centre of the card as shown and adhere the 4 pearls to the corners of the purple frame.

Stamp the sentiment onto paper from the collection using the gorgeous grape ink, cover in clear embossing powder, remove excess and heat to set. Cut into a 2.75” square and adhere onto a slightly larger piece of grape card. Cut a 3.25” square piece of patterned paper from the collection and layer onto a slightly larger piece of grape card. Add both layers to the centre of the card using foam pads.

Make the flowers: Stamp1 large set of petals, 2 medium sets and 2 small sets onto the flower shaping paper using the gorgeous grape ink. Add tangelo ink to the centre of the flowers and die cut. Add grape ink to the edges of the petals to shade and colour the reverse. Place the petals face down into the mold and spritz with water, run through the die cutting machine to shape. Pierce a hole in the centre of the flowers and thread the stamens through the centre, using 2 sets of different sized petal, secure with hot glue.

Create 2 organza bows and hot glue into opposite corners of sentiment square. Position the flowers around the bow and hot glue into place.

Other Products: Versamark watermark stamp pad, steadler watercolor pencils, foam dots.

For more tips on creating with the Sweet Peony collection, watch the tutorial at https://youtu.be/L9_MLkvpGPQ.

Instructions: Create a black card base of size 5 1/2" by 7". Stamp the peonies from the large and small sweet peony cling stamp set with versamark stamp pad on white cardstock and heat emboss in gold.

Color the petals with watercolor and steadler watercolor pencils. Stamp the leaves from the large and small sweet peony cling stamp sets on black cardstock and heat emboss in gold. Cut the flowers and leaves using their coordinating dies. Arrange the flowers and leaves as shown and glue a few flowers using foam dots to give dimension.

Stamp the sentiment from just for you sentiments cling stamp set on black cardstock and heat emboss in gold.

Lastly, add prills to the flower center and dust edges of the flower petals with crystal clear glitter powder.

Other Products: copic markers, distress ink Peacock Feathers

For more tips on creating with the Snowy Pines Collection watch the tutorial at https://youtu.be/nVtKVcgg530.

For more tips on creating with the Candlelit Christmas collection, watch the tutorial at https://youtu.be/PJeFD_d3AiM.

Instructions: Create a 6 inch x 6 inch card base. Cut a 6 x 6” green check panel from the Snowy Pines Paper Collection and adhere to the card front. Cut out a piece of light green paper from the paper collection for the top 3.5 x 5.5”, distress with olive ink, cut out the border die from the Sweetheart Borders Die in white and adhere to bottom of the light green panel, cutting off the excess and adhere to card front.

Stamp medium pinecones from the Festive Pine Cones Cling Stamp Set, sponge with olive, and the cottage from the Snowy Pines Cabin Cling Stamp Set twice in black, color the cottage with copic markers and sponge the background with Peacock Feathers, on the second stamped cottage sponge the pinecones with Peanut Brittle and Toffee Crunch Ink, sponge pines with Olive ink, color the birds with copic markers and cut out all with coordinating dies and add frosting powder. Cut off the pine tops of the medium pinecones to create greenery for the poinsettia spray. Stamp the sentiment from the Candy Cane Cottage Cling Stamp Set in black on green designer paper and cut out with the Arrows and Banner Die, distress with Olive. Cut out the largest die from the Elaborate Oval Frames Die in white and adhere with cottage and sentiment as shown, using foam tape for dimension.

Stamp the poinsettias from the Christmas Poinsettia and Holly Cling Stamp Set in Elderberry and Sweet Plum and sponge with same, cut out with coordinating dies, sculpt with the 3D Christmas Poinsettia Shaping Mold, add prills and frosting powder.

Stamp the holly from the Christmas Poinsettia and Holly Cling Stamp Set in Olive and sponge with same, cut out with corresponding dies and sculpt with mold.

Adhere holly, pinecones, poinsettias and pines as pictured.

Other Products: Small Foam Dots; Ribbon; Bow-it-all; Die cut machine;

For more tips on creating with the Snowy Pines Collection watch the tutorial at https://youtu.be/nVtKVcgg530.

Instructions: Prepare a 5 1/2 x 7 1/2” white card base with a piece of the Snowy Pines paper (Sheet 6A) which is slightly smaller, on top that is inked on the edges with the Bamboo Leaves ink and adhere to the card base. Use the same sheet only the back side (6B) cut it the same width and 4 inches tall. Place the Starry Night border die on top and run through the die cut machine, cut 3 of the printed tags out with the coordinating die, glue 2 in place. Add a piece of ribbon wrapping the edges around and glue in place, add foam dots to the back of the panel you just made and adhere to the card as shown. Adhere the 3rd tag on top and add bow at the top of that one.

Cut 3 of the smaller stamps out from the tag sheet, add foam dots to the back and adhere to a piece of the Snowy Pines paper, add foam dots to that piece and adhere to the card.

To finish, add the stays white glue on all the snow and top with glitter.

Other Products: Gold glittered Tule, Red Wire, Embossing Folder, Fun Foam, Gold Half Bead, Copics: R23 R24, R29, Y11, E31, E33, E35, YG61, YG63

video For more tips on creating with the Snowy Pines Collection watch the tutorial at https://youtu.be/nVtKVcgg530.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Card size: 4 1/4 x 5 1/2". Make easel card by cutting 1 piece of white cardstock 8 1/2 x 5 1/2" then score at 4 1/4 and 6 3/8” and cut 3 pieces 4 1/4 x 5 1/2". Emboss 2 of the 4 1/4 x 5 1/2" pieces, glue 1 to the other 4 1/4 x 5 1/2" piece. Glue the embossed stack (card front) to the 2 1/8” end part of the scored base (Make sure to only put glue on the 2 1/8” end). Glue the other embossed piece to the card inside.

Cut 2 white and 2 gold Ornate Ovals (outer die), glue them together in sets with white on top. Glue 1 to the front and 1 to the inside on top of embossed panels. Cut 2 red Eyelet Ovals, 1 Fun Foam Oval, 1 gold Silent Night and 1 Fun Foam Silent Night. Glue the Fun Foam oval to the back of 1 red Eyelet oval then glue that stack to the front. Glue the gold Silent Night to the Fun Foam Silent Night then glue it to the inside toward the bottom of the red Eyelet Oval.

Stamp 2 small pinecones, 2 pine boughs and the Cardinals using black, die cut and color. Add the pine boughs and pinecones to the inside on each side of the Silent Night. Add the Cardinal oval to the front. Use Dries White glue to the snowy parts of branch and on the pinecones then glitter. Use Dries Clear on the snowflakes and glitter. < /p>

Stamp poinsettias with Vermillion, die cut and sponge with Carnation. Stamp Holly using Fern Green, sponge with Leaf Green and die cut. Form both in the Shaping Mold. Glue 2 large poinsettia together then fill the center with gold Prills. Cut a piece of glittered gold tulle (or glitter it yourself), use red thin wire to pinch center together then curl wire around a pencil. Cut another piece of wire and twist it around pencil and tulle. Glue the tulle to bottom right corner of front then glue the poinsettia to the center of tulle.

Glue gold half balls to each corner of front and inside. Glitter poinsettia and randomly glitter card.

Other Products: Dimensional tape

For more tips on creating with the Snowy Pines Collection watch the tutorial at https://youtu.be/nVtKVcgg530.

For more tips on creating with the Candlelit Christmas collection, watch the tutorial at https://youtu.be/PJeFD_d3AiM.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Cut white card stock to size 6” x 12” and score at 6” mark on the longer side on the scoring board. Fold to make a top fold card base. Add a mat layer of white card stock 5 7/8” x 5 7/8” and adhere to the card. Cut pattern paper from paper collection to the size a little smaller than the mat layer and adhere on the card front. Cut a 6 inch card panel from paper collection and remove the inner portion with paper cutter. Adhere this frame on the card front using foam dots.

Cut a strip of background paper measuring 2 1/2 inches by 6” and mat it on luxe gold paper leaving a little border all around. Adhere this whole panel at the bottom of the card using foam dots.

Stamp the pine cones with Jet black ink and colour with Zig markers. Cut with coordinating die. Arrange the pine cones on the upper part of card front in layers.

Cut the insert die cut from gold and white card stock from Ornate ovals die. Layer them together and add them to the bottom strip. Add the sentiment on the card.

Make poinsettia flowers by stamping the flowers in Red Geranium Archival ink on Flower shaping paper. Stamp the leaves with Library green ink. Colour the leaves with olive green ink and leaf green using sponge daubers. Cut the flowers and leaves with coordinating dies. Shape the flower and leaves in 3D flower shaping mold. Layer the flowers together and add prills in the centre. Arrange the flowers and leaves on the card.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, sisal, Distress ink Peeled paint

For more tips on creating with the Snowy Pines Collection watch the tutorial at https://youtu.be/nVtKVcgg530.

For more tips on creating with the Candlelit Christmas collection, watch the tutorial at https://youtu.be/PJeFD_d3AiM.

Instructions: Cut a piece of white cardstock to 8 1/4 x 7 7/8" size, score and fold at 3 15/16". Cut a piece of green patterned paper from the Snowy Pines to 8 1/16 x 3 3/4" size. Adhere it to the base. Cut a piece of the Snowy Pines paper to 7 5/8 x 3 1/2" and a piece of white cardstock to 3.5 x 7 13/16” size. Glue them together and attach them to base using adhesive foam. Using the biggest die from the Ornate Ovals Die set, diecut one decorative oval from white cardstock. Attach the oval in the middle of the card using glue and dimensional adhesive foam.

Stamp the image from Snowy Pine Cardinals Cling Stamp Set in Jet black ink onto Deluxe Flower Shaping paper and diecut with coordinating die. Repeat it using the smaller die, diecut just birds. Stamp the poinsettia flowers from Christmas Poinsettia & Holly Cling Stamp Set in Red Geranium onto same cardstock and diecut with coordinating die. Stamp holly leaves in Leaf Green ink onto same cardstock and diecut with coordinating die. You’ll need 21 blossoms and 16 holly leaves. Stamp 7 lilac flowers in Distress ink Peeled paint ink and diecut with coordinating die.

Use the markers or pencils to color the images. For white parts of image use glue and Crystal Clear glitter to make them sparkle. Attach them in the middle of the decorative oval. Color poinsettias and leaves with dabbers and inks. Use mold to shape poinsettias and holly leaves and the Deluxe Flower Shaping stylus to shape lilac flowers. Use some prills in the centers of poinsettia and lilac flowers. Use hot glue to attach flowers and leaves onto card as pictured.

To add that extra sparkle, use the Dries Clear glue along with Crystal Clear glitter on flowers and leaves.

Other Products: paper trimmer, scissors, hot glue gun, alcohol markers, gold gilding wax, corner punch, distress ink barn door and crushed olive

For more tips on creating with the Snowy Pines Collection watch the tutorial at https://youtu.be/nVtKVcgg530.

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: Stamp onto Deluxe Flower Shaping Paper Snowy Pines Cabin with Memento Tuxedo x 2 and colour the whole design on one and the wreath on the other, die-cut with co-ordinating dies and layer the wreath with 3D dots. Mat onto gold Ornate Oval. Die-cut Ornate Oval in white and green from the paper pad and glue together. Die-cut another large oval in matching paper to cover the back of the gold cardstock that will be visible when the card is opened. Die-cut a smaller oval and edge in gold gilding wax. Mat and layer using 3D dots. Die-cut the rounded square from the paper pad 3 3/4” and mat onto 4” gold cardstock with punched corners.

Stamp onto Deluxe Flower Shaping Paper the Small Wild Rose in Vermillion, die-cut with co-ordinating dies and colour centres with crushed olive and petals in barn door distress ink front and back to the centres. Once coloured, spritz the back with water and run the mold through the die-cutting machine. Use the Deluxe Flower Shaping Kit to further shape. Pierce the centre of the roses and feed through stamens and secure with a glue gun, cut off the excess once dry. Stamp onto Deluxe Flower Shaping Paper Leafy Accents in Leaf Green and die-cut with co-ordinating dies. Colour the leaves front and back with Vivid Chartreuse and edge in Leaf Green.

Cut a piece of cardstock 5 1/2” x 10” and score landscape 2 1/2” each end to create the gatefold. Cut each gate with the outer edge of the Medallion Die to give the shaped front and cut again in patterned paper to cover front and back of the flaps and adhere. Cut patterned paper to cover the inside and rear 5 x 5 1/2” panels and adhere. Die-cut in green the decorative Medallion and cover each front gate panel.

Adhere the gold Ornate Oval attaching to the gate panel on the left-hand side only. When the oval is in position adhere the flowers to the corners ensuring they do not hinder the closing of the card. Adhere the back oval and glue flowers. To finish, add some dries clear and glass shards, glitter and gold gilding wax.

Other Products: Heavy cardboard, Iris cardstock, Hero Arts Embossing and Watermark ink, stamp positioner

For more tips on creating with the Snowy Pines Collection watch the tutorial at https://youtu.be/nVtKVcgg530.

For more tips on creating with the Candlelit Christmas collection, watch the tutorial at https://youtu.be/PJeFD_d3AiM.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Cut a piece of white cardstock 10” x 5”, score at 5” along the long side and fold to create a base card of 5” x 7”. Cut a piece of gold cardstock 5” x 7” and adhere to the front of the card. Cut a piece of red patterned paper 4 7/8” x 6 7/8” and adhere to the front of the card. Cut a piece of gold cardstock 4 5/8” x 6 5/8” and adhere to the front with a piece of 4 1/2” x 6 1/2” heavy cardboard. Cut a piece of light green patterned paper 4 1/2” x 6 1/2" and adhere to the gold cardstock. Cut four corners from the HCD1-7213 Elegant Pocket Accents Die set out of gold cardstock and adhere to the four corners as shown. Die cut the outer decorative oval from the HCD1-7305 Ornate Ovals Die set out of gold cardstock and adhere to the front of the card with heavy cardboard. Die cut an oval using the largest plain edge oval from the HCD1-7157 Eyelet Ovals & Basics – Large set out of green patterned paper and adhere to the front of the decorative die. Die cut the middle decorative oval from the HCD1-7305 Ornate Ovals Die set out of gold cardstock and adhere to the front of the green patterned paper with heavy cardboard. Stamp the sentiment from the HCPC3884 Candy Cane Cottage Stamp set in Embossing ink and heat emboss with gold embossing powder using a stamp positioner on the small panel from the patterned paper. Die cut the oval using the second largest plain edge die from the HCD1-7157 Eyelet Ovals & Basics – Large set and adhere to the front of the gold decorative oval.

Stamp two of each pine images from the HCPC-3837 Snowy Pine Village Stamp set in Teal Zeal ink on Deluxe Flower Shaping Paper. Colour with Teal Zeal, Vivid Chartreuse and Sepia inks and die cut with the coordinating dies. Add Crystal Clear glitter using Dries Clear glue on a damp sponge and adhere to the top around the oval as shown.

Stamp the snowy pines cardinal image from the HCPC-3918 Snowy Pines Cardinal Cling Stamp Set on Iris cardstock with Black Onyx ink. Colour with Zig Clean Colour Brush Markers and die cut the birds and branches die only. Add snow effects using Dries White glue sprinkled with Crystal Ultrafine glitter. Cut the image in half and adhere the birds on either side of the decorative oval as shown.

Stamp the poinsettia images from the HCPC-3881 Christmas Poinsettia & Holly Stamp set in Vermillion ink on Deluxe Flower Shaping paper. Colour the centres with Vermillion ink and die cut with the coordinating dies. Assemble with two of the same size and add Frosting Powder using Dries Clear glue on a damp sponge. Add Heart of Gold Prills to the centres of the flowers and adhere around the birds and over the pine branches.

Stamp the holly leaves using Library Green ink on Deluxe Flower Shaping Paper. Colour the leaves with Vivid Chartreuse ink and die cut with the coordinating dies. Add Crystal Clear glitter with Dries Clear glue on a damp sponge. Adhere around the poinsettias as shown.

Add snow effects on the poinsettias, pine cones, pine leaves and on the image in the oval ANC804 Prills – Heart of Gold with Dries White glue and Crystal Ultrafine glitter. Add Ultrafine glitter to the bird cage on the oval panel with Dries Clear glue.

Other Products: Stampin’ Up Real Red Cardstock, Stampin’ Up Garden Green Cardstock Glue Gun, White Cardstock, Stampin’ Up Real Red Ink Pad, Dimensional dots, VersaMark, WOW Sparkling Snow Embossing Glitter, Red Satin Cord, Green Satin Cord, Gold Gala Glitz, Wink of Stella Clear

For more tips on creating with the Snowy Pines Collection watch the tutorial at https://youtu.be/nVtKVcgg530.

For more tips on creating with the Candlelit Christmas collection, watch the tutorial at https://youtu.be/PJeFD_d3AiM.

Instructions: Card size is 5 x 7”. Cut Deluxe Flower Shaping Paper 10 x 7”. Score and fold at 5” and diecut using the outer die from Decorative Circle Frames Die. Position the die just over the fold to create the shaped card base. Cut a second piece of Deluxe Flower Shaping Paper and adhere to the card base. Diecut two pieces of the Snowy Pines Paper collection, sheet 6A for the front and sheet 4B for the inside, using the same die. Ink the edges using Archival Olive ink and adhere one to the card front, trim the top edge of the second one and adhere to the inside of the card. Cut the ‘warm holiday wishes’ sentiment panel from the paper collection, ink the edges with Olive and adhere to the inside of the card.

Using the decorative die from the same set, diecut from Luxe Gold Cardstock and adhere to the card front using dries clear adhesive. Using the largest from the Large Circle Dies, cut a circle from the same designer paper sheet 6A, ink the edges with Olive ink and adhere to the card front. Die cut the largest eyelet die from the Decorative Circle Frames Die and adhere to the card front using dimensional dots. Using the second largest plain die from the Small Circles Die set, cut the center of the card panel on sheet 2A. Ink the edges and adhere to the front using dries clear adhesive.

Stamp Poinsettias on real red cardstock using VersaMark, sprinkle with WOW Sparkling Snow Embossing Glitter and heat set using Heat It Tool. Stamp holly leaves on garden green cardstock using VersaMark, sprinkle with WOW Sparkling Snow Embossing Glitter and heat set using Heat It Tool. Diecut using coordinating dies and shape using the 3D Poinsettia Shaping Mold. Adhere two of the poinsettia flowers together to create one flower, being sure to off-set. Adhere poinsettia and holly leaves to the card base using hot glue. Add dries clear adhesive to the poinsettia centers and add gold gala glitz.

Adhere the poinsettia to the card front using hot glue. Use Wink of Stella on the cardinals, snow, pinecones and berries to add some sparkle. Add a bow made from red and green satin cord.

Other Products: Die Cutting machine, Trimmer or Guillotine, Scoreboard, Scissors, Bone folder, White cardstock, Hot glue gun, White Pearls, Ranger Distress Ink pads - Chipped Sapphire, Broken China, Mowed Lawn; Ranger Archival Ink Pad - Cobalt

For more ideas on creating with the 5 x 7 Decorative Frame Dies, watch the tutorial at https://youtu.be/qdBFA5VpmSo.

For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.

Instructions: Side fold card measures - 5 inches by 7 inches. To create card base - cut out a 10” x 7” piece of white cardstock and score it at 5” (long side up). Fold using a bone folder along the score lines. Cut out 6 7/8” x 4 7/8” piece of Paper Collection, distress it with Chipped Sapphire Distress Ink using Daubers and adhere it to the front using Designer Dries Clear Adhesive with Metal Tip. Die cut decorative piece of White Card using HCD2-7307 Royal Elegance Frames Die and adhere it to the card base as shown.

Die cut decorative oval from Paper Collection using HCD2-7307 Royal Elegance Frames Die, add an additional layer of white card on the back and adhere the final piece on the card front using 3D foam. Die cut decorative oval frame from Paper Collection using HCD2-7307 Royal Elegance Frames Die, add an additional layer of white card on the back and adhere the final piece on the card front using 3D foam.

Cut out the sentiment from Paper Collection and slightly larger White card piece, stock and adhere them together using 3D foam, then adhere the final piece on the centre of the card using 3D foam.

Stamp the leaves of HCPC-3842 Oakberry Lane Blossoms Cling Stamp Set on HCPP1-475 Deluxe Flower Shaping Paper with Cobalt Archival Ink and colour them with Mowed Lawn Distress Ink using Daubers, then die cut them with matching HCD1-7200 Oakberry Lane Blossoms Die. Stamp flower petals of HCPC-3842 Oakberry Lane Blossoms Cling Stamp Set on HCPP1-475 Deluxe Flower Shaping Paper with Cobalt Archival Ink and colour them with Chipped Sapphire and Broken China Ranger Distress Inks using Daubers, then die cut them with matching HCD1-7200 Oakberry Lane Blossoms Die. Place leaves and flower petals in HCFB1-469 3D Blossoms Shaping Mold, spray them with water and run them through a die cutting machine. Assemble Oakberry flowers using a hot glue gun, then use a paper piercer to make a hole in the middle of it and pull some stamens through it. Add a little hot glue underneath the flower to secure the stamens. Using Metal tip and Designer Dries Clear Adhesives apply glue on flower and leaf edges and sprinkle PGM15015 Rajni Chawla's Crystal Clear glitter. Adhere the flowers to the card front using a Hot glue gun and fill in composition with leaves.

For finishing touches, decorate the card with White Pearls as desired.

Other Products: London Fog Memento Die Ink Pad, Dandelion Memento Die Ink Pad, White Cardstock, Blue Cardstock, Cotton Balls, Dimensional Board, Hot Glue Gun, Die Cut Machine, Distress Ink in Worn Lipstick Seedless Preserves and Faded Jeans

For more tips on creating with the Tea Time Collection watch the tutorial at https://youtu.be/4bjPeZW_oT8.

For more tips on creating with the Cottage Garden Collection watch the tutorial at https://youtu.be/faBoB2s49RI.

Instructions: My finished card is 5” x 7”. Cut a piece of cardstock 7” x 10” and score at 5”. Fold and this makes the card base. Cut a piece of blue cardstock 4 7/8” x 6 7/8” and glue to card front. Die cut the Intricate Swirl Frame out of a piece of the paper collection and glue down to the front. Next I measured the center of the frame and cut a piece of blue cardstock sized 3 1/4” x 5 1/4” then I glued it down.

Fold a piece 5 1/2" x 14” of cardstock so it measures 5 1/2” x 7”. Using gray ink stamp the teapot onto the cardstock. Place the teapot die onto the cardstock so that part of the top is above the fold. Run this through the die cut machine which makes the base of the shaped teapot part of the card. Stamp the teapot again onto another piece of white cardstock and cut it out. This piece fits over the piece that has part of the top cut off. This makes the card look finished.

Now that the shaped card is ready to go use the Dove blending pen and various Memento Ink colors to color the teapot. Using gray ink stamp the flowers and other elements as well as the leaves and cut them out using the coordinating dies and then use Dandelion, and Bamboo Leaves to color the flower petals and leaves. Run the leaves through the die cut machine with the mold to shape then set aside to dry. Use the Deluxe Flower Shaping Kit to shape the flower petals and then add prills to the centers and set aside to dry. I used London Fog Memento Ink to color the spoon and Distress inks to color the bag of tea. Once everything is dry decide on placement and glue down. I added some dimensional board behind the sign and the bag of tea.

Now that it is finished, the teapot opens up as a card and the card base opens up as well so you have lots of real estate for writing a quick message.

Other Products: Twine, glue, 3d squares, white cardstock 120g, pen blue and orange, scissors

For more tips on creating with the Cottage Garden Collection watch the tutorial at https://youtu.be/faBoB2s49RI.

For more tips on creating with the Tea Time Collection watch the tutorial at https://youtu.be/4bjPeZW_oT8.

Instructions: Cut out a rectangle from Kraft Cardstock and a Eyelet royale decorative frame from white paper. Place the yellow patterned paper from the Tea Time collection underneath. Join together using glue.

Using Jet Black ink, stamp the teapot, tea bags, teaspoon on patterned paper from the Tea Time collection. Die cut all images with coordinating dies. Arrange the layered composition and adhere images onto card as shown using foam adhesive to give it dimension.

Create blue hydrangea flowers. Stamp images of Hydrangea flower using black ink on Deluxe Flower Shaping Paper. Cut with matching die and shape in the flower shaping mold. Combine two petals, pierce a hole in the center and insert the stamens. Add glue to each petal and the bottom of the flowers. Stamp the leaves with Ranger Archival Jet Black ink on Deluxe Flower Shaping paper. Apply green ink using the dauber. Die cut with the coordinating die. Stamp the bird using black ink and color using markers. Place the flowers, leaves and bird as shown.

Wrap the bottom with string as shown. Cut the sentiment out using scissors and glue using 3d squares at the bottom.

Other Products: Hero Arts unicorn White pigment ink, transparent glitter, rhinestones and MISTI.

For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.

Instructions: Card Base: Ink the edges of 4 1/4" x 5 1/2" white card base with Manganese Blue and Garden Patina Archival Inks so that the corners are darker than the edge in the middle. Use Hydra Sponges along with Designer Dries Clear Adhesive to apply a thin layer of adhesive over the inked edges and sprinkle transparent glitter. Burnish the glitter with fingertips or bone folder once the glue dries and brush off the extra glitter.

Adhere another piece of 4" x 5 1/4" white cardstock on the inked card base. Die cut 2 pieces of white cardstock using the die from Swirly Accent Spray Die. Ink them with the same inks as shown in ombre style. Use the same steps to apply the glitter to these die cuts as we did for the card base and adhere them as shown.

Take the sentiment from Celebrate Love Sentiments Cling Stamp Set and use MISTI or any other stamp positioning tool to stamp the sentiment in the center of the card. To get the ombre look stamp the sentiment with Garden Patina Archival Ink first and then ink only the lower half of the sentiment stamp with Manganese Blue Archival Ink and stamp over the already stamped sentiment.

Blue flowers: Stamp the largest flowers from Oakberry Lane Blossoms Cling Stamp Set on a sheet of Deluxe Flower Shaping Paper with Garden Patina Archival Ink and ink them with the same ink using Stack and Store Daubers. Die cut all the flowers using the matching die from Oakberry Lane Blossoms Die. Shape them using the 3D Blossoms Shaping Mold and Deluxe Flower Shaping Kit. Add some pink and orange stamens Small Bright Pearl Stamens and Small Pastel Pearl Stamens to the flower centers.

White Vellum Flowers: Stamp the flowers from Floral Fashionista Cling Stamp Set on a sheet of Rajni Chawla's Vellum Flowerite with Hero Arts unicorn White pigment ink and heat emboss using White Embossing Powder and Heat It Craft Tool. Die cut all the flowers using the matching die from Floral Fashionista Die. Shape them using Deluxe Flower Shaping Kit and add a pink stamen from Pastel Bead Stamens to the flower centers and ink the white stems with Leaf Green Archival Ink.

Leaves: Stamp the leaves from Oakberry Lane Blossoms Cling Stamp Set several times on a sheet of Deluxe Flower Shaping Paper with Olive Archival Ink and die cut them using matching die from Oakberry Lane Blossoms Die. Ink them using Leaf Green, Sunflower and Vibrant Fuchsia Archival Inks. Shape the leaves using 3D Blossoms Shaping Mold.

Arrange and adhere the flowers and leaves as shown. Add a tiny ladybug made with Ebony Black and Red Berry Nuvo Crystal Drops to the floral arrangement. Add few rhinestones to the die cut for finishing touch.

Other Products: Distress Ink Vintage Photo, Hot Glue Gun, Glitter Dust, Small Half Pearl Beads, Score Board, Tape.

For more tips on creating with the Cottage Garden Collection watch the tutorial at https://youtu.be/faBoB2s49RI.

For more ideas on creating with the Decorative Royale Square & Circle Dies, watch the tutorial at https://youtu.be/tqmtn_TiVVw.

Instructions: The ready top fold card from white card stock measures 9” by 7”. Cut a panel of white card measure 8 3/4 by 5 3/4. Cut a Panel from Tender Moments Paper Collection Sheet number 6A which is slightly smaller than white panel and adhere on white panel using clear glue. Place all 4 corner dies from Stairway Gardens Die set on this ready panel, tape it and run through the die cutting machine. Adhere this panel on card base using 3D foam strips and foam dots.

Stamp Window from Cottage Window & Hydrangea Cling Stamp Set using Coffee Ink on white card and color using Zig markers and distress ink. Cut another shadow of window die and color yellow shade on the white card layer colored image on this cutting using 3D foam strip. Stamp small Hydrangea Flowers from Cottage Garden Hydrangea Cling Stamp Set on white card using Forget me not ink color and the center part with Vivid Chartreuse ink and flower edges with same forget me not ink. Shape flowers using shaping tools and add green Nuvo drop in the center. Add glitter dust for embellishing the flowers.

Stamp remaining images from Cottage Window & Hydrangea Cling Stamp Set using leaf green ink on white card and color using Zig markers. 

Arrange all ready elements using Hot Glue and foam dots as shown. Stamp Sentiment from Stamp set using Forget me not ink in white card and add using foam dots. Add pearls to embellish the card.

Other Products: Inks: Spectrum Noir Harmony-Chinese red, Grass hopper, Friar brown, Grass green. Midas Blush3D double sided tape, White card stock, Misti stamping tool.

For more tips on creating with the Snowy Pines Collection watch the tutorial at https://youtu.be/nVtKVcgg530.

For more tips on creating with the Candlelit Christmas collection, watch the tutorial at https://youtu.be/PJeFD_d3AiM.

Instructions: This card measures 5 1/4” x 5 1/4” (13.5cm x 13.5cm) when finished. Taking the white card stock and make a tent fold card to the measurements. Taking the Midas blush ink and inking tool, ink the edges of this card base. Find the paper from the paper collection, sheet number 3B. Ink the edges using the Friar brown ink.

Taking the white card stock and the oval ornate dies, die cut one each of the lace frames. Ink the edges using the Midas blush for the largest frame and the Friar brown for the edges of this frame. Use the Friar brown for the smaller frame. Stamp the sentiment from the Words Of Encouragement stamp set. Adhere the frames to the card front by using the 3D Dots.

Stamp two of the pine cones onto the white card stock and colour the image in with the Friar brown for the pine cone and the Grass green, grass hopper and the honey pot for the pine needles. Die cut the pine cones using the matching die. Adhere the pine cones to the sides of the lace frame.

Make the poinsettias using the stamp, die set, colour the flowers using the Chinese red and the honey pot ink for the flowers and the grass hopper for the holly leaves. Use the shaping mold for the shaping. For the flowers, two flower petals for each flower. One set of holly leaves for each flower back. Apply the prills to the flower centres. Adhere the poinsettias to the centre of each pine cone spray.

Other Products: Spectrum Nior Harmony Inks- Grass Green , Grass Hopper, Honey Pot, Friar Brown, Chinese red.-Midas Inks- Blush. Other: Diamond Stickles, Double sided tape, 3D double sided foam tape, Inking tools, Misty stamping tool, White card stock.

For more tips on creating with the Snowy Pines Collection watch the tutorial at https://youtu.be/nVtKVcgg530.

For more tips on creating with the Candlelit Christmas collection, watch the tutorial at https://youtu.be/PJeFD_d3AiM.

Instructions: This card measures 5 1/4” x 5 1/4” (13.5 cm x 13.5cm)when finished. Taking the white card stock, make a tent fold card base to the measurements. Ink the edges with the blush ink. Adhere the paper to the card base using 3D double sided foam tape or the 3D dots. Using the white card stock and the Oval Ornate largest die, make a lace frame. Using the blush ink, bring colour to the lace frame. Adhere the frame to the card front using the 3D double sided foam tape or the 3D dots.

Taking once again the white card stock and the large pine cone stamp, stamp this twice. Colour the images in with the colours listed. Die cut the image with the matching die. Trim away the pine leaves from one of the stamped images. This will be used later. Bring shape to the pine cone using the shaping tools. Adhere the two pine cones in place with the clear drying glue and the 3D foam tape or dots. Adhere the cut away pine leaves as fillers.

Make the poinsettias: Stamp, colour and die cut two flower petals and two holly leaves from the Christmas poinsettia sets. Us the matching mold to bring shape to the flower and leaf petals. Apply the prills to the flower centres. Adhere to the point where the bow and the pine cone meet. To finish the card apply stickles to the pine needles and holly leaves. Put aside to dry.