Instructions:

The ready top-fold card base from smooth white cardstock measures 5 1/2″ by 8 1/2″. Choose the designer paper from the Garden Lily Collection and cut to size measuring 4 3/4″ by 7 3/4″  Glue the panel on white cardstock creating a sleek border of 1/16″ on all sides. Next, cut another mat from Luxe Gold Cardstock, creating a delicate border of 1/16" on all sides. Layer the panel on the ready card base using double-sided tapes for extra dimensions.

To decorate the card front, choose the paper from the designer paper collection and cut its solid frame using the outermost die from the HCD3-7448 Slim Ornate Rectangle Die set. Next, cut the lacy frame in white cardstock and gold cardstock and glue them together keeping the gold one on the bottom, creating a delicate gold shadow. Secure the ready lacy frame on the solid panel with printer tape and chop the inner part apart. Remove the tape and layer the chopped frames on the solid frame using double-sided tape. Further, layer these panels on the ready card base as shown. 

For blue-gold vellum Lilies, Stamp the flowers on Vellum Flowerie cardstock using Hero Arts Versamark ink and sprinkle golden heat embossing powder. Dust extras in the funnel tray and heat set the flower petals. Cut the petals using the coordinating die. Color the petals using Broken China distress Oxide and shape them using flower-shaping tools. Form the flowers and prick the center to add Petite Pollen Stamens - Medium. Prepare 1 medium flower of 3 petals and 2 small flowers of 2 petals each. Also, white heat emboss the butterfly from Small Floral Butterfly Cling Stamp Set in the same way and cut it using its coordinating die. Shape the butterfly a little with a needle tool for extra dimensions.

Stamp, color, and cut a few Wisteria flowers using Leaf Green Archival ink, color them in the center using the same ink and shape them using a flower shaping kit. Add flower beads using a glossy accent and use these flowers as fillers.

Stamp 2 sets of leaves using Leafy Accent stamp and Olive Green Archival ink and cut them using its coordinating die. Color the leaves using the same inks and shape them using a deluxe flower shaping kit.

Once all the elements are ready, assemble the card as shown and complete the card by adding a sentiment strip. 

Other Products: Die Cutting Machine, Score Board, Bone Folder, Smooth White Cardstock, Scissors, , Double Sided Tape, Flower Seeds, Glossy Accent, Tacky Glue, Hero Arts White Pigment Ink. Funnel Tray, Versamark Ink, Distress oxide Broken China

Instructions:

The ready top-fold slimline card from smooth cardstock measures 9 1/2" by 4 1/2". To prepare the card base, cut the paper measuring 9 1/2" by 9 " and score at 4 1/2" on 9" length and crease well.

For the card front, choose the pattern paper from the Garden Lily collection, cut measuring 9" by 4" and frame it with a panel cut from Luxe Gold cardstock, creating a delicate border of 1/16" on all four sides. Layer the panel on the ready card front using dimensional tapes. 

To decorate the card front, choose the paper from the designer paper collection and cut a window frame using the dies from the HCD3-7448 Slim Ornate Rectangle Die. Next, cut a lacy frame in Luxe Gold cardstock using the same die set and glue it directly to the solid area of the window frame. Layer this frame on the card front using dimensional tape. 

Cut the sentiment die twice in white and once with Luxe gold cardstock. Stack all the words from the sentiments together keeping the gold on the top. Glue this sentiment in the window as shown. 

For Pink garden Lilies, stamp the flower petals on deluxe flower shaping paper with Magenta Hue, cut them using the coordinating die set, and color them using the same ink. Shape the petals using the flower shaping tools and form the flowers. Prick the centers and add Petite Pollens stamens to complete the flowers. 

Stamp the butterfly from Small Floral Butterfly Cling Stamp Set on Vellum Flowerite cardstock using Hero Arts Versamark ink and sprinkle white embossing powder. Dust extras in the funnel tray and heat set the butterfly. color and cut it using the coordinating die and shape the butterfly a little with a needle tool for extra dimensions. 

Stamp, color, and cut a few Wisteria flowers using Leaf Green Archival ink, color them in the center using the same ink and shape them using a flower shaping kit. Add flower beads using a glossy accent and use these flowers as fillers.

Stamp 2 sets of leaves using Leafy Accent stamp and Olive Green Archival ink and cut them using its coordinating die. Color the leaves using the same inks and shape them using a deluxe flower shaping kit.

Once all the elements are ready, assemble the card as shown. 

Other Products: Die Cutting Machine, Score Board, Bone Folder, Scissors, Smooth White Cardstock, Double Sided Tape, Flower Seeds, Glossy Accent, and Tacky Glue

Instructions:

Fold white cardstock to 4.5  x 9 1/4" with fold on the side then use the biggest die from the Slim Eyelet Heart Rectangle Die to cut leaving the left side of the die over-hanging fold by about 1/4". Cut a full front with the same die from the white cardstock and another one from the Garden Lily Paper Collection. Glue them on. Cut out a silver and a white frame with the die No. 2 from the Slim Eyelet Heart Rectangle Die. Cut out a white and a silver frame with the die No. 5, a rectangle with the die No. 6 and a white sentiment from the same set. Adhere all elements to the base as pictured.

Stamp blossoms from the Garden Lily Cling Stamp Set in Cactus Flower ink onto Deluxe Flower Shaping Paper, color their edges with the same ink and their centers with the Sunflower ink, diecut with coordinating dies and shape with mold. Add Pastel Pearl Small Stamens to all flowers. Stamp blossoms from Cottage Garden Hydrangea Cling Stamp  in Cactus Flower ink onto Deluxe Flower Shaping paper and diecut with coordinating die. Shape them with Deluxe Flower Shaping tools and add some Minnie Pearl Prills. Stamp 4 branches from Cottage Tree 'scapes Cling Stamp Set in Fern Green ink, color them with Leaf Green ink and cut out with coordinating die. Stamp 4 branches from Classic Rose Cling Stamp Set in Fern Green ink, color them with Leaf Green ink, cut out with coordinating die and shape with coordinating mold. Stamp 2 branches from Sweet Magnolia Buds in White ink onto Vellum paper, use Opaque Embossing Powder, then heat emboss them and diecut with coordinating die. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers. Add some self-adhesive crystals.  

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, sisal, colored pencils, self-adhesive crystals

Instructions:

Card size:  5 1/8” X 6 7/8”. Cut a shaped card base (see video), score right side again at the halfway point between center fold and outside edge of base to form easel. Cut blue decorative paper for inside easel base.  Cut another card front from white and from blue decorative paper then glue front to bottom half of easel front only. Cut another front with an extended folded 1” flap at top (same as if it were a shaped card base), glue the 1” flap to the back of card front (this will make a shaped flap for the pocket you will create), cut the panel (after gluing blue paper on) with the plain edge of the Curvy Decorative Border a little lower than halfway down.

Cut another card front with matching blue paper then cut this panel with a straight edge a little higher than the center (this will be the pocket bottom), glue it to the easel front om the bottom and 2 sides only (leave top open as pocket). Now, cut 2 tags for the pocket and close top flap.  

Cut the Decorative border from white and from silver, glue together off-set then glue to the top curved edge of flap.

Cut the Flourish Companion decorative die from white and from silver 2 times. Glue sets together. Glue one set to the inside of easel card. Cut the other set just slightly below center then glue the larger half to the flap (ends will go over the Decorative Border a bit) then glue the bottom half to the pocket front. This will finish card base. Stamp sentiment with Sky Blue, die cut with oval to fit then die cut a silver oval mat. Pop up on bottom portion of inside easel base (this will make the easel stand).

Stamp the Garden Lily Bouquet and 2 extra lily images using black for the front flap decoration. (these will cover points where dies cross at the bottom corners). Color images with Copic Markers (or chose coloring method). Die cut then pop up on card front flap.

Stamp Lilies with Sunflower, sponge with Buttercup. Stamp leaves with Bamboo Leaves, sponge with New Sprout, die cut all then shape in the mold. Glue 2 lilies together for each flower, pierce centers then insert stamen. Arrange 2 lilies with leaves on inside easel next to each side of the sentiment.

Glitter flowers, card base and front. Add ribbon to tags inside of pocket.

Other Products: Ribbon, white cardstock, hot glue, foam sheet, Copic Markers: Y11, Y15, Y38, RV02, RV04, YG11, YG05, YG17,

Instructions:

Card Size is 9 x 4”. Score and fold 9 1/2 x 8 1/2” white cardstock at 4 1/4” on the short side, Place the largest Slim Ornate Rectangle Die about 3/8” over the fold and diecut to create tent fold shaped card base. Cut two more times, trim the top of one to fit inside the card. Stamp the ‘Thinking of you Today’ sentiment from the Elegant Rose Sentiment Cling Stamp Set on this one using Tuxedo Black ink and color using Stampin’ Blend markers. Dry emboss the second white diecut using a textured embossing folder. I used Stampin’ Up Subtle Embossing Folder which has been retired. Adhere to the card front using dries clear adhesive.

Using the decorative Slim Ornate Rectangle Dies, cut from white cardstock and Luxe Silver cardstock. Adhere the white decorative diecuts on top of the silver decorative diecuts, slightly offset so that it creates a beautiful glimmery shadow. Adhere to the card front using dries clear adhesive. Diecut the ‘On your Special Day’ sentiment from the same set 3x, adhere together for dimension and color using Seaside Spray ink and a blending brush. Brush with dries clear adhesive and sprinkle with glitter. Dry emboss the long white rectangle diecut, adhere to the long silver rectangle diecut, slightly offset, and adhere the sentiment to the rectangle using dries clear adhesive. When dry, adhere the rectangle to the center of the card using dimensional tape. 

Stamp the Classic Roses on Deluxe flower Shaping Paper using Seaside Spray ink, diecut with the coordinating dies, color the front and the back using the same ink and shape using the Groove Golf Tools. Use four same size flowers to create each rose. Using the Groove Golf Tool, pierce a hold in the middle of the smallest flowers and insert an Assorted Bead Stamen – Medium. Using a paint brush, cover the flowers with watered down dries clear adhesive and sprinkle with Rajni Chawla’s Crystal Clear glitter.

Stamp the Classic Rose and Leafy Accents leaves on Deluxe Flower Shaping Paper using Archival Olive ink, color using the same ink along with Leaf Green ink and diecut using the coordinating dies. Add additional color to the edges of the leaves using the olive ink. Shape using the Deluxe Flower Shaping Kit. Using a paint brush, cover the leaves with watered down dries clear adhesive and sprinkle with Rajni Chawla’s Crystal Clear glitter.

Adhere the flowers and leaves to the card front using hot glue. 

Other Products: White Cardstock, Die Cutting Machine, Seaside Spray Ink – Stampin’ Up, Dimensional Adhesive, Misti, Funnel Tray, Stampin’ Up Subtle Embossing Folder (Retired), Hot Glue Gun, Stampin’ Blend Markers – Light and Dark Granny Apple Green and Light and Dark Seaside Spray, Paint Brush, Blending Brush

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 8 1/4” x 9 1/4”, score at 4 1/4” along the 8 1/2” side and fold to create a base card of 4 1/4” x 9 1/4”. Cut a piece of gold cardstock 4 1/8” x 9 1/8” and adhere to the front of the card. Cut a piece of green pattern paper 4” x 9” and adhere to the front of the gold card.

Die cut two decorative dies from Deluxe Flower Shaping Paper using the No. 2 dies from the HCD3-7447 Slim Elegant Rectangle Die. Stack the decorative dies together and add Frosting Powder using Dries Clear on a sponge and adhere to the front of the card. Add the insert left from the dies to the inside of the frame. Die cut a label from gold cardstock using the No. 3 die from the HCD3-7447 Slim Elegant Rectangle Die and adhere to the centre of the decorative frame. Die cut a label from Deluxe Flower Shaping Paper using the No. 4 die from the HCD3-7447 Slim Elegant Rectangle Die and adhere to the front of the gold label. Die cut another gold label using the No. 5 die from the HCD3-7447 Slim Elegant Rectangle Die and adhere to the white label. Stamp the sentiment from the HCPC-3843 Special Birthday Sentiments Cling Stamp set in gold ink and heat emboss with gold embossing powder. Die cut the sentiment out using the No. 6 die from the HCD3-7447 Slim Elegant Rectangle Die and adhere to the front of the card.

Stamp the small filler flower from the HCPC-31012 Garden Lily Spray & Fillers the Cling Stamp Set and the large floral bouquet image from the HCPC-31013 Garden Lily Bouquet & Buds Cling Stamp Set using gold ink on watercolour paper and heat emboss with gold embossing powder. Colour with watercolour paints and die cut with the coordinating dies. Adhere the flowers to the left side of the card over the sentiment as shown with foam tape. Add Crystal Clear glitter using clear gloss gel and a paint brush.

To finish, add pink iridescent jewels to the frame and around the flowers and sentiment as shown.

Other Products: Altenew Artist Watercolours, Altenew Watercolour Paper, Pink Fresh Studios Jewels - Ballet Slipper, foam tape, clear gloss gel, paint brush

Instructions:

Create a top fold card measuring 7 1/2” x 5 1/2”. Choose a designer paper from Elegant Rose Frames Paper Collection and cut it to the size 7 1/4”x 5 1/4”. Adhere it on white card base. Choose another designer paper from same collection and cut it to the size 6 3/4” x 4". Place 2 dies from Curvy Decorative Border die on one side of the card and pass it through you die cutting machine. Layer this paper on golden card stock. Adhere this panel on the card base using foam tape.

Cut die cuts from white card stock using Curvy Decorative Border die and third frame die from Oval Filigree Frame Die and glue it on the card base as shown. Trim the small oval part from the designer paper using small oval die from the same die set, stamp the sentiment using Just For You Sentiments Stamp Set with Memento Cottage Ivy Ink, add this oval in the center space using clear glue.

For the wild roses, stamp the flower petals with Vibrant Fuchsia archival ink using the Large and Small Wild Rose Stamp sets. Ink the flower centers using Vivid Chartreuse archival ink and color the flowers using Vibrant Fuchsia archival ink. Stamp the leaves from the leafy accents cling stamp set with archival fern green and color them using leaf green archival ink and Vivid Chartreuse archival ink. Cut the flowers and leaves using their coordinating dies and shape them using their coordinating 3D shaping molds. Assemble the flowers and add  Ribbit prills to the flower centers. For finishing touch, dust Rajni Chawla’s Crystal Clear Powder.

Die cut a tag from same paper collection using a die from Ornamental Tags die set. Stamp the butterfly image from Delightful Daffodil & Butterfly Cling Stamp Set with versamark ink on Rajni Chawla’s Vellum Flowerite and sprinkle white heat embossing powder. Dust extras and heat set the image using a heat tool. Cut the butterfly using  the coordinating die. Shape the butterfly.

Once all the elements are ready, decorate the card using prepared flowers, leaves and butterfly as shown.

Other Products: Die Cutting Machine, Score Board, Bone Folder, Smooth White Cardstock, Scissors, Rangers White Heat Embossing Powder, Heat gun, Versamark ink pad.

Instructions:

The finished card measures 9 x 4 inches. Cut one piece of white cardstock in deluxe flower shaping paper 9 by 8 inches and score at 4 inches to make a side fold card. Place Slim Gateway rectangle die about 1/2" up past fold so that fold does not get cut. Use the same die again on a piece of paper #6A from the Garden lily collection.  Ink the edge with library green ink and glue it to the folded card matching bottom and side edges.

Die cut the second biggest die from the same kit in the Deluxe Flower Shaping paper and glue it on the card. 

Stamp your Lily flowers with sunflower ink onto white flower shaping paper, color the center and shade the edge with the same color. You can also color the back of the flowers. Diecut with the coordinating dies. Place face down into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe flower shaping kit tools. Glue 2 layers together. In the center of the flowers make a hole and add stamens. With a brush add a little bit of 3D crystal lacquer on your flowers. Add glue on the tips of the flowers and dip it into crystal clear powder. 

Also stamp and die leaves with leaf green and color the center with a bit of library green ink. Use the mold to give shape to your leaves.

 In deluxe flower shaping paper die cut 1 tag from the Slim elegant Rectangle die kit. Ink the edge with leaf green ink and stamp in the same color sentiment from the Celebrate Love Sentiments cling stamp set.  Add it to the top of your card.

Put cheesecloth and sewing thread on the left of your card and make a bouquet arrangement on it.  

Other Products: Die cutting machine cut'n boss, scissors, water mister, hot glue gun, cheesecloth, sewing thread, archival library green ink

Instructions:

Ready side fold card measures 7" × 7". Cut a mat from designer paper collection measuring 6.75" × 6.75", distress edges with matching ink and adhere it on card base. Cut a 6" × 6" card panel from designer paper and trim it on all four sides to make it 5.5" × 5.5". Adhere it on white cardstock which is 1/8 of an inch bigger on all four sides. Cut 2 decorative frames from white cardstock using Slim Eyelet Heart Rectangle die set. Cut frames and glue them on second mat as pictured. Adhere second mat on card using dimensional tape. Die cut sentiment from white cardstock and Luxe Gold cardstock using die from the same set. Glue white pieces with gold cardstock pieces to create dimension and adhere it on card as shown.

Stamp Garden Lily flower on deluxe flower shaping paper using magenta hue ink and sea grass ink. Cut with coordinating dies and paint using same ink. Stamp leaves from the same set using olive green ink and cut with coordinating die. Paint leaves using leaf green ink. Shape flowers and leaves using 3D Shaping mold. Pierce the centre of flowers and add stamens. Arrange flowers and leaves on card using hot melted glue. Once satisfied with arrangement, brush them with clear adhesive and sprinkle Rajni Chawlas's Crystal Clear glitter.

Stamp Butterfly image on vellum paper using white ink and heat emboss using white embossing powder Cut with coordinating die . Also cut one more butterfly from Luxe Gold cardstock. Glue both to card using foam dots. For a finished look, glue a bow of white satin cord and beads. 

Other Products: Smooth White Cardstock, Satin Cord, Beads, Seagrass Archival ink

Instructions:

Ready tent fold shaped card measures 9 x 4". Cut a folded card from white cardstock using largest shaped die from Slim Elegant Rectangle Die set. Also cut a mat from white cardstock and designer paper using the same die from the set. Distress edges of designer paper mat with matching ink. Glue designer paper mat on white cardstock mat and adhere it on folded card. Cut a decorative frame from white cardstock and Luxe Gold cardstock using a die from the same set. Glue both together and adhere it on card. Die cut white cardstock and designer paper using die from the same set, distress edges of designer paper die cut with matching ink. Glue it on white cardstock die cut. Adhere it in the card using dimensional tape. Cut 2 more small pieces, one from Gold cardstock and one from white cardstock. Stamp sentiment on white cardstock die cut using magenta hue ink.  Glue both pieces to card using dimensional tape as pictured.

Stamp Garden Lily flower on deluxe flower shaping paper using magenta hue ink and seagrass ink. Cut with coordinating dies and paint using same ink. Stamp leaves from the same set using olive green ink and cut with coordinating die. Paint leaves using leaf green ink. Shape flowers and leaves using 3D Shaping mold. Pierce the centre of flower flowers and add stamens. Arrange flowers and leaves on card using hot melted glue. Once satisfied with arrangement, brush them with clear adhesive and sprinkle Rajni Chawlas's Crystal Clear glitter.

Stamp Butterfly image on vellum paper using white ink and heat emboss using white embossing powder Cut with coordinating die . Also cut one more butterfly from Luxe Gold cardstock. Glue both to card using foam dots. For a finished look, glue a bow of white satin cord.

Other Products: Smooth white cardstock, Seagrass archival, Satin cord

Instructions:

My finished card size is 4" x 9".  Make card base using Deluxe Flower Shaping Paper. Cut a piece of this paper 8 1/2" x 9" and score at 4 1/4 then fold. I took the largest die in the Slim Ornate Rectangle set and positioned it just over the fold line and cut out making the card base 4" x 9". Cut another piece of cardstock using this same die and glue it to the card front. Now cut a piece of Sheet #5A of the paper collection and also glue to the card front. 

Cut the next smallest die in the set using white cardstock and cut one using the Luxe Gold Cardstock. Glue these two die cuts together with the white one on top and with just a bit of the gold showing through. Glue to the card front.  

Using the next smallest die, cut a gold piece and a white piece. Discard the white die cut except for the center which we are going to glue inside the gold die cut. This is where we are going to mount our sentiment. Cut the sentiment strip using Luxe Gold Cardstock and glue the words to the white strip of the die cut.  

Now we are going to work on the flowers and leaves. Stamp the flower petals onto the Deluxe Flower Shaping Paper in Magenta Hue and lightly color the centers of the petals with Buttercup ink. Cut out with coordinating die and then color the edges of the petals with Magenta Hue. Lay the petals onto the mold, spritz with water and run through the die cut machine. Lay out onto the desk to dry. Once dry, put a mound of hot glue in the enters and dump the Prills onto that and allow to dry. Shake off any excess Prills and put back into the container. Using a Hydra Sponge and Designer Dries Clear Adhesive add glitter to the petals and allow to dry. 

Stamp the leaves onto Deluxe Flower Shaping Paper using Leaf Green ink. Color using Leaf Green and Vivid Chartruese then die cut with coordinating dies. Edge in Leaf Green and Olive inks to add a bit of contrast. Lay onto shaping mold, spritz with water and run through die cut machine then turn out onto the desk to dry. Stamp the spray onto the Deluxe Flower Shaping Paper using Leaf Green ink. Color using Leaf Green ink the die cut with coordinating die. 

Once everything is dry, decide on placement and hot glue down. The card is finished.    

Other Products: Die Cut Machine, Hot Glue Gun, White Cardstock

Instructions:

Cut a strip of white card 9.25” x 8”, score and fold in half to create a slimline card base. Place the large outer die over the fold and die cut to create a shaped card base. Die cut the large outer die in white card and another in pale green paper from the collection. Adhere these together and adhere to the front of the card base.  Die cut the large ornate die in darker green paper from the collection and adhere this to the card base. Die cut a second decorative die and use the inner “waste” to adhere to the centre of the card inside the decorative diecut.

Die cut the smaller decorative frame using white card, adhere to a green paper from the collection and trim closely to the white die cut, layer onto a white piece of card and trim to give a thin border. Adhere across the front of the card base using foam pads. Die cut the sentiment from the green paper and adhere to the white centre strip, adhere this to fit inside the decorative strip.

Make the leaves: Stamp the leaves x3 onto paper from the collection using northern pine ink, die cut and add additional colour to the edges using a dauber. Place face down into the mold, spritz lightly with water, and run through the die cutting machine to shape.

Make the flower: Stamp 2 large lilies onto flower shaping paper using buttercup ink, colour lightly with buttercup ink and make a stroke line along the centre of each petal using copic Y26. Die cut and colour the reverse of the petals, place face down into the shaping mold, spritz with water and run through the die cutting machine to shape. Add more buttercup ink to edges and add shaping using the flower shaping tools. Adhere 2 sets of 3 petals together, offsetting the petals, to create the flower. Thread 3 petite pollen stamens and 1 assorted bead stamen in the centre of the flower and adhere into place using hot glue.

Make the pink lilies: Stamp x2 large and 1 small petals using rose bud ink onto flower shaping paper. Stroke the ink from the centre of each petal towards the outer edge using a triangle dauber. Die cut, place face down into the shaping mold, spritz with water and run through the die cutting machine to shape. Add additional shape if required using the flower shaping tools. Adhere 2 sets of 3 petals together, offsetting the petals, to create the flower. Thread 3 petite pollen stamens and 1 assorted bead stamen in the centre of the flower and adhere into place using hot glue.

Large pink fillers: Stamp x2 the large spray fillers onto white stamping card using northern pine ink for the leaves and rose bud for the flowers, use the water brush to colour the pink flowers with rose bud ink, diecut. Use the daubers to add shading to the flowers with the rose bud ink and lightly colour the leaves with bamboo leaves ink. Add shape using the flower shaping tools.

Garden lily buds: stamp x2 onto white stamping card using northern pine ink for the stem and leaves and rose bud for the buds. Colour the stem and leaf in bamboo leaves ink. Use the water brush and rose bud ink to colour the buds. Die cut. Add northern pine ink to the edges of the leaves and additional rose bud ink to the tips of the buds. Shape using the flower shaping tools.

Position the leaves and flowers above the sentiment panel and secure with hot glue. Paint over the florals with 3d lacquer and sprinkle lightly with transparent glitter.

Other Products: Copic Y26, white card, foam pads, hot glue

Instructions:

Create a top fold card measuring 7 1/2” x 5 1/2”.  Choose a designer paper from Garden Lily Paper Collection and cut it to the size 7 1/4” x 5 1/4”. Adhere it on white card base. Choose another designer paper from the same Paper Collection and cut it to the size 7” x 5”. Now, mat this paper on Luxe Gold Card stock making a delicate border of 1/16” on all four sides. Adhere this panel on ready card base using foam tape.

Cut all the required die cuts from white and gold cardstock using Simply Classic Oval Frame die and Fancy Classic Oval Frame. Adhere all these die cuts on the card base as pictured.

Stamp the flowers and leaves from the Garden Lily cling stamp set on Deluxe flower shaping paper using Magenta Hue archival ink and Sunflower archival ink for flowers and Olive archival ink for leaves. Now color the flowers by using Leaf Green archival ink in the center and Magenta Hue and Sunflower archival ink on the petals. Color the leaves using Leaf Green archival ink and Bamboo leaves momento ink. Cut the flowers and leaves using their coordinating dies and shape them using the coordinating 3D shaping mold. Now add green stamens from Petite Pollen Stamens to the centre of flowers. Now stamp leaf and buds image 3 times from Garden Lily Bouquet & Buds cling stamp set using Bamboo Leaves Moment ink and colour all the images using zig markers. Die cut these images using coordinating dies.

Stamp the butterfly image from Floral Butterfly Accents Cling Stamp Set with VersaMark on Rajni Chawla’s Vellum Flowerite and sprinkle gold heat embossing powder. Dust extras and heat set the image using a heat tool. Cut the butterfly using the coordinating die. Shape the butterfly using Deluxe Flower Shaping Kit. Stamp a sentiment “I’m thinking of you” from For My Friend Sentiments stamp set on a white strip using Library Green Archival ink.

Once all the elements are ready, assemble the card as shown. Finish the card by adding the sentiment strip and adding glitter to the flowers.     

Other Products: Die Cutting Machine, Score Board, Bone Folder, Smooth White Cardstock, Scissors, Heat gun, VersaMark.

Instructions:

The ready top-fold card base is 9 x 6 1/2 inches in size on Ivory cardstock. Take 2 pieces of Ivory cardstock cut into 8 3/4 x 6 1/4 inches in size, sponge the edges using Cactus flower ink and adhere on the front and inside card panels. Take another 2 pieces of the pattern paper from HCDP1-2144 Elegant Rose Frames Paper Collection, cut slightly smaller than the Ivory pieces and sponge the edges using Cactus flower ink. Adhere these pieces on the Ivory pieces making a thin frame around. 

Using HCD1-7263 Swirly Accent Spray Die, cut 4 pieces each of the dies with Ivory card stock. Stack and glue 2 each, sponge some dries clear glue on each of the die-cuts and add crystal clear glitter. Once dried, adhere these elements to te card front as shown. Using the pattern paper, die-cut the outer frame of HCD2-7382 Simply Classic Oval Frame Die. Cut the inner decorative die with 2 pieces of Ivory cardstock, stack them together and add glitter Adhere this on the outer mat layer and onto the card front using dimensional tape. 

Stamp and white heat emboss the images from HCPC-3986 Wild Poppy Cling Stamp Set on vellum cardstock and color with Seedless Preserves ink. Cut the images using the coordinating dies, shape them using flower making tools and stack 3 petals each for a flower.

Stamp few images from HCPC-3911 Wisteria Petals Cling Stamp Set on flower making paper with Majestic Violet ink and color using Cactus Flower ink. Cut the images using the coordinating dies and shape using flower shaping tools. On flower making paper, stamp a few of the images from HCPC-3959 Holly Berry Spray Cling Stamp Set with Fern Green ink and color using Leaf green ink. Cut the images using the coordinating die and add some crystal clear glitter by sponging dries clear glue. 

Stamp the sentiments using Cactus Flower ink and cut using the tags die. Arrange and adhere all the ready elements on the card front using hot glue. For extra interest, add some heart-shaped clear water droplets around the arrangement.

Other Products: Ivory cardstock, dimensional adhesive, hot glue, hot glue gun, funnel tray, scissors, paper trimmer, scoring board, die cutting machine, Seedless Preserves distress ink, Purple brads, heart-shaped clear water droplets

Instructions:

Cut a piece of white cardstock to 9 1/4” x 8 1/4” and score in half at 4 1/8”. With HCD3-7448 Slim Ornate Rectangle Die use the largest die and cut through both layers of the folded card base making sure to let the long edge of the die fall over the edge of the card to preserve the fold. This will create the shaped card base. Next, using the same die, cut two pieces from the HCDP1-2128 Climbing Clematis Paper Pad, sheet 10B. Ink the edges using the HCDA2-450 Stack and Store Daubers with Majestic Violet Archival Ink, then attach these two papers to the card front and inside of the card. (The inside piece will need a slight trimming across the top to fit) Using the second largest die from the Slim Ornate Rectangle Die Set, cut 2x, once from white cardstock and once from Luxe Silver Cardstock. Discard the center piece from the Luxe Silver Cardstock as we will not be using that piece. Save the white inside piece for stamping on in the next step. Now layer the white and silver frames with silver on top slightly off setting them so that the white shows a little. Glue this to the card front.

Now take the white inside piece from the above die cut piece and stamp HCPC-3969 Vining Clematis Banner Cling Stamp Set 2x horizontally across the paper with Leaf Green Archival Ink. Color with the Stamp and Store Daubers with Leaf Green, Olive, and Majestic Violet ink. Glue to the center of the frame on the card front.

Stamp the HCPC-3954 Clematis Cling Stamp with Majestic Violet Ink, the small size 3x and medium size 1x. onto Deluxe Flower Shaping Paper. Color lightly with Majestic Violet ink and then die cut with the coordinating dies. After die cutting darken the edges with the dauber and the Majestic Violet ink. Shape using the coordinating 3D Shaping mold then use the Deluxe Flower Shaping Kit to press the centers of each flower. Now layer as desired and add Lettuce Entertain You Prills and Crystal Clear Glitter to finish the flowers.

Next stamp the HCPC-3912 Cascading Wisteria Cling Stamp Set 3x in leaf green onto Deluxe Flower Shaping Paper and color with Leaf and Olive Archival Inks. Die cut using coordinating dies. Shape with the Deluxe Flower Shaping Kit.

Die cut the sentiment dies from the Slim Ornate Rectangle Die Set 3x from white cardstock and 1x from sheet 10B used earlier. Adhere these on top of each other with the purple paper on top and then ink the edges with Majestic Violet ink. Center the sentiment dies onto the card base and glue down.

Now arrange the vines and flowers around the frame and attach with a glue gun to complete the card. 

Other Products: Glue Sticks and Glue Gun, Scissors, Paper Trimmer, Die Cut Machine

Instructions:

Cut a 4" x 5 1/4" piece of pattern paper from Floral Basket Paper collection and adhere it on a 4 1/4" x 5 1/2" card base. Die cut 2 pieces of white cardstock using the die from Slim Gateway Rectangle die, trim them and adhere them on the cardbase as shown. 

Stamp the images from Wicker Basket & Basket Florals cling stamp sets on a piece of deluxe flower shaping paper using Jet Black Archival ink and die cut them using the matching dies from Wicker Basket die & Basket Florals die. Colour them using Altenew watercolours and adhere them on the card front as shown using Double sided foam tape.

Other Products: Altenew watercolors, Brustro green gold brushes & double sided foam tape

Instructions:

Cut out the white base of the card and fold it to 4 1/2" x 10". From the Garden Lily paper collection, cut a slightly smaller rectangle and glue to the base. Cut white paper frame from the Slim Eyelet Rectangle Die set. Next, cut out the green and pink paper from the paper collection with a rectangle from the Slim Eyelent Rectangle Die set and the same rectangle from white paper.In the white and green rectangle, cut out the edges with the dies from the Curvy Decorative Border set. Then glue the layers  with Double Dots 100 pc. -3D Foam Circles. 

To make lily, stamp flowers several times with Memento Rose Bud ink, then color them with the Archival Ink Rose Madder. Cut with coordinating die. Shape flowers with the Mold from the same collection. Fold the flowers and glue with hot glue. Add glue and add one yellow and a few green stamens in the centers.

To make the leaves, stamp several times the leaves from Garden Lily stamp set with Memento Olive Grove ink. Color the leaves with Archival ink Olive and Memento New Sprout ink. Form the leaves with the Mold from the same collection.

Stamp the sentiment from the Cheerful Note Sentiments set on a white strip of paper. Glue everything as shown. Cover the flowers with glue and sprinkle with glitter.

Other Products: Die Cut Machine, hot glue

Instructions:

Create a 5 x 7 inch card base in white cardstock. Cut a 4.5 x 6.5 inch piece of pale blue paper from the Garden Lily Paper Collection, distress with French Ultramarine and adhere to card front. Cut the frame from the Simply Classic Oval Frame Die out of pale peach paper, distress with Vibrant Fuchsia and adhere with foam tape to card front.  Cut the decorative die in pink paper and adhere. Cut out the next oval in white card stock and adhere, cut out the next size down die in peach cardstock, distress with Coastal Coral and adhere with foam tape, cut out the next size decorative die in white cardstock and adhere, cut out the smallest die in pink paper, distress with Vibrant Fuchsia and adhere.

Stamp the lilies from the Garden Lily Cling Stamp Set in Vibrant Fuchsia, sponge with Sunflower, Vibrant Fuchsia and Plum, cut out with coordinating dies and sculpt with the Garden Lily Shaping Mold, add stamens and glitter.

Stamp the leaves from the Garden Lily Cling Stamp Set, the lily sprigs from the Garden Lily Bouquet & Buds Cling Stamp Set, and the lily sprigs from the Garden Lily Spray & Fillers Cling Stamp Set in olive and sponge with Vibrant Fuchsia, Plum and Leaf Green, cut out with coordinating dies, sculpt with stylus and add glitter.

Stamp the sentiment from the Thank You Sentiments Cling Stamp Set in Jet Black on white cardstock and cut out with the Arrows and Banner Die.

Adhere flowers, foliage and sentiment as shown.  

Other Products: White cardstock

Instructions:

For the card base, score Deluxe flower shaping paper at 5 1/4 and fold it into half make card base 5 1/4 by 10 inches by cutting off extra paper. Trim designer paper from Garden Lily Paper paper sheet number 8B which is slightly smaller than card base and adhere on the card base using clear glue.

Use sheet number 3A from Garden lily paper collection and die cut the largest die from Slim Ornate Rectangle Die on the paper add extra shadow layer underneath for the sturdiness. Die cut the largest frame from Slim Ornate Rectangle Die on the deluxe card 2x adhere both together using clear glue. Die cut the inside frame from the smilar die set on the deluxe card 2x and adhere both together. 

Apply versaramark on both smallest and largest decorative frame and cover it with embossing powder, heat it using heating tool.

Add Ribbon in the holes of smallest frame as shown. Adhere both frames on the ready shadow frame shape using clear and hot glue. Add this layer on the card base using dimensional tape.

Die cut the sentiment from Slim Eyelet Heart Rectangle Die on deluxe 2x adhere both layers together apply Saltwater Distress Ink using dauber then add clear glue using sponge and add Magic Glitter, add this sentiment in the empty space on the smallest frame using clear glue.

For the flowers, stamp the classic rose images on the Deluxe Paper using versamark embossing ink cover with white embossing powder heat it using heating tool die cut with coordinating dies, and color the centers using Saltwater Ink with dauber. Shape the flowers in 3D shaping mold and finish shaping using shaping kit and make a few flowers using hot glue. Apply clear glue on the flowers using sponge and sprinkle some Nida Tanweer Glitter Powder. 

For the leaves, Stamp the leaf image from  classic rose stamp set on the Deluxe Card using Leaf Green Ink, die cut using coordinating die, color the image with mowed lawn and leaf green ink using dauber and shape the leaves using shaping shaping mold and cover with magic glitter powder.

Make a bunch on the left side of the card as shown with ready elements. Add Nuvo drop, pearls, pearl string and decorative beads to embellish the card.

TIP: Use tweezer to place sentiment perfectly.

Other Products: Versamark Embossing ink, Wow Embossing Powder Perisa, Green Ribbon, Hot Glue Gun, Saltwater Distress Ink, Mowed Lawn Distress Ink, Tweezer, Nuvo Drops, Nida Tanweer Magic Glitter, pearl, pearl string, decorative beads, Dimensional Tape.

Instructions:

To make the card front of this 9 1/2” x 4” slimline tent fold easel card, cut a piece of Deluxe Flower Shaping Paper to 9 1/2" x 4". Take the largest, 9 1/2” x 4” Slim Eyelet Rectangle Die, from the Slim Eyelet Rectangle Die Set, die cut in green paper from the Garden Lily Paper Collection. Adhere to card front with Designer Dries Clear Adhesive. Take the largest Slim Basic Rectangle Die, from the Slim Basic Rectangle Die Set, die cut in pink paper from the Garden Lily Paper Collection. Adhere to card front. Cut a 2 1/2” x 9” strip of pretty paper from the paper collection and adhere down the centre of the card front.

To make the easel part of the card, take a 12” x 12” sheet of Deluxe Flower Shaping Paper, cut two 12” x 4” strips. Score both strips at 4” and 8”. Cut off one 4” section from one of the strips, glue the two strips together at a 4" section, so that there is now a four-section strip. Cover the first and last 4" sections with matching paper from the Paper Collection.

To make five Lilies, stamp onto Deluxe Flower Shaping Paper, and color with Ranger Archival Rose Madder ink using a Dauber, two sets of Garden Lilies from the Garden Lily Cling Stamp Set. Die cut with the matching dies. Stamp and color three leaves, in Ranger Archival Olive ink. Die cut with the matching dies. Place Lilies and leaves in the Garden Lily Flower Shaping Mold, lightly mist with water, and run through a die cutting machine. Tap out and make holes in the centers of the Lilies using a Paper Piercing tool from the Deluxe Flower Making Kit. Glue two sets of the same size petals together with Dries Clear Adhesive. Offset the petals as you go. Thread Petite Pollen Stamens through the holes and glue in place. To make the foliage, stamp with Olive ink, onto Flower Shaping Paper, five long buds from the Garden Lily Bouquet & Buds Stamp Set, two large Garden Lily Fillers, five small sprays and two bouquet sprays from the Garden Lily Spray & Fillers Cling Stamp Set. Color with Olive ink using a Dauber. Color the flowers and buds with Rose Madder ink, using a Dauber. Die cut with the matching dies. Lightly mist with water and shape all pieces with the stylus from the Deluxe Flower Making Kit. To decorate the card, adhere the two largest Garden Lily Fillers to the top and bottom of the card front. Adhere the lilies down the center with hot glue. Adhere all the foliage and buds in between the Lilies. Stamp a sentiment from the Special Birthday Sentiments Cling Stamp Set onto Flower Shaping Paper in Olive ink. Die cut with a tag from the Album Tags and Accents Die Set. Adhere Tag to card front. Adhere a small pearl to the tag. Adhere the card front to the first 4"-fold, of the easel sections strip, which is the reverse of the papered section. Make sure to only add glue to the first 4" section of the card front.

To make the stopper for the easel, adhere two bouquet sprays together and adhere to the bottom half of the last 4” section. Lightly sponge Dries Clear Adhesive over the Lilies, foliage and buds. Apply clear glitter. All done.

Other Products: Score board, water spray bottle, die cutting machine, hot glue, small white pearl, clear glitter.

Instructions:

Create base: fold paper and using Slim Gateway Rectangle Die, cut piece from white cardstock, using this same die cut from paper collection paper and place onto card. Cut using Slim Gateway Rectangle Die from paper collection and gold paper, glue together and place on the card using adhesive foam strips.

Stamp the Large Wild Rose Cling Stamp Set on foam paper with Ranger Archival Ink Pad - Light House and cut using the coordinating dies. Colour with Gallery soft oil pastels 210 and 204. You will need 2-3 petals for each to create flowers. Use an iron or heat gun to heat the petals and when they start to shrink move them on the Molding Mat and press on the middle using shaping tool - using bigger one. Layer the petals together using the hot glue gun making sure to offset them, use a paper piercer to make a hole in the middle and pull through the stamens. Add a little hot glue to the underside of the flower to adhere (watch tutorial). Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter

Stamp the leaves using Large Wild Rose Cling Stamp Set on the white paper with Memento Dye Ink Pad - Bamboo Leaves, cut out with the coordinating die, shade using this same ink and shape using mold.

To create lily leaves, stamp the Garden Lily Cling Stamp Set and on the white paper with Ranger Archival Ink Pad - Leaf Green, cut out with the coordinating die, shade use this same ink and shape leaves using mold. Sponge the leaves with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

To create Clematis flowers, stamp Clematis Cling Stamp on white paper with Ranger Archival Ink Pad - Vibrant Fuchsia and cut using the coordinating dies. You will need 2 petals of each to create flowers. Colour the flower with Ranger Archival Ink Pad - Vibrant Fuchsia using a sponge dauber. After colouring, place the flowers into the mold and run through cutting/embossing machine. Pierce the center and glue in some stamens using hot glue gun. Add a little hot glue to the underside of the flower. Add little glue around stamens and sprinkle prills, leave it to dry.  Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine

Instructions:

Fold white cardstock to 4.5  x 9 1/4" with fold on the side then use the biggest die from the Slim Elegant Rectangle Die to cut leaving the left side of the die over-hanging fold by about 1/4". Cut a full front with the same die from the white cardstock and another one from the Garden Lily Paper Collection. Glue them on. Cut out a silver and a white frame with the die No. 2 from the Slim Elegant Rectangle Die. Cut out a white and a patterned rectangle with the die No. 3 and 4 from the same set. Stamp the sentiment in Fern Green ink using Thank You Sentiments stamp and cut it out. Adhere all elements to the base as pictured.

Stamp blossoms from the Garden Lily Cling Stamp Set in  Sunflower ink, color them with the same ink, diecut with coordinating dies and shape with mold. Add Pastel Pearl Small Stamens to all flowers. Stamp blossoms from Lush Lilac Stamp Set in Leaf Green ink onto Deluxe Flower Shaping paper and diecut with coordinating die. Shape them with Deluxe Flower Shaping tools and add some Orange Juice Prills. Stamp 3 branches from Leafy Accents Cling Stamp Set in Fern Green ink, color them with Leaf Green ink, cut out with coordinating die and shape with coordinating mold. Stamp 2 lilies from the Basket Blooms Cling Stamp Set in Tuxedo Black ink, color them and cut out with coordinating die. Stamp the lily from the Garden Lily Spray & Fillers Cling Stamp Set in Tuxedo Black ink, color it and cut out with coordinating die. Stamp 4 branches from Cottage Tree 'scapes Cling Stamp Set in Fern Green ink, color them with Leaf Green ink and cut out with coordinating die. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers. Add some self-adhesive pearls.   

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, sisal, colored pencils, self-adhesive pearls

Instructions:

Create a Slim Line card by cutting a piece of white card stock 9 1/2” x 9”.  Score the 9” side at 4 1/4”. Die cut a piece of the Garden Lily paper using the Slim Line Rectangle die, use the 2nd die from the set and cut  out  a piece of white card stock. Adhere the 2 together. Cut a white tag from the same set and stamp the sentiment from the Friendship Sentiment set on with the Coastal Coral ink. Add foam dots to the back and place in the center of the card.

Stamp the Small Wild roses on white with the Plum ink, color the center with the Coastal Coral . Cut out with the coordinating die. Place in the matching mold and run through the die cut machine to shape. Use the Flower Shaping tool kit and poke a hole in the center of each flower, add the stamen and secure with hot glue. Set aside.  o color the stamens black lay them on the black ink pad and with the dauber change the color.

Stamp the Leafy Accents on white with the Cottage Ivy ink, color with the Vivid Chartreuse and die cut wit the coordinating die. Ink the edges with the Emerald Green ink. Place in the matching mold and run through the die cut machine to shape.

Add the leaves and flowers on both sides of the sentiment.

To finish, add glitter to all the leaves and flowers.

Other Products: Paper Trimmer, Die Cut Machine, Foam strips,

Instructions:

Cut a white cardstock base to 8 x 9", and fold in half (4x9). Cut a piece of dark pink patterned paper to 4 x 6". Using the Slim Elegnat Rectangle die, cut the largest die from light pink patterned paper and the next smaller from black cardstock. Adhere these layers together, and then adhere to the card base using foam tape. Cut the next die from green patterned paper. Adhere to the card. Cut the next smaller die from black cardstock, and the next from dark pink patterned paper. Adhere these layers together and adhere to the card front using foam tape. 

Stamp the Let's Celebrate sentiment onto white cardstock, then die cut out. Adhere to the middle of the card front. Stamp the small Clematis flowers onto Deluxe Flower SHaping Paper using dark pink ink (Stampin Up- Berry Burst) and die cut. Add color to the flowers using the same ink and a water brush. Shape the flowers using the coordinating 3D Shaping Mold. Add Prills to the middle of each flower using a liquid adhesive. Let dry. 

Add flowers to each side of the sentiment. Stamp the buds on white cardstock using an embossing pad and black embossing powder. Die cut out and add to either side of the card front. Finally, add green gems around the large decorative die cut piece. 

Other Products: Gems- Green, Cardstock (White, Black), Embossing Pad, Black Embossing Powder, Water brush, Stampin Up Ink- Berry Blast, Scrapbook Adhesives by 3L (Dual Tip Glue Pen, E-Z Runner Ultra, Crafty Foam Tape, Adhesive Dots Small)