Instructions:

Cut Deluxe Flower Shaping paper to 8 3/4 x 5 5/8" size, score and fold at 4 3/8". Cut a piece of the lavender patterned paper (sheet 12B) from Iris Garden paper collection to 5 1/2 x 4 1/4". Cut another piece of the white flower shaping paper 5 1/4 x 4 1/16". Using from the HCD2-752 Cut Mat Create 2B Die, diecut the largest rectangle from the center of the lavender and white panel so that they align when layered on top of each other. Stamp the floral sprigs from HCPC-31022 Iris Garden Accents in a combination of French Ultramarine and Leaf Green on the leaf and Cactus Flower on the floral part. Stamp off the image on scrap paper each time before stamping onto bottom and left side of white frame panel as shown. Sponge the edges of lavender frame with Cactus Flower ink and the white frame with Garden Patina ink. Also sponge the center panel edges with the Garden Patina ink. Sponge some of the Leaf Green on the white panel over the area where the iris will be placed on the card, so this creates a dimensional backdrop for it. Attach the two frames on top of each other as shown.

Stamp the smallest iris petals from HCPC-31020 Iris Garden Petals Cling Stamp Set in Cactus Flower ink and then Majestic Violet on some areas of stamp and onto Flower Shaping paper. You’ll need 4 sets of petals of each one. Stamp 2 of the flower sprigs from HCPC-31022 Iris Garden Accents Cling Stamp Set in same colors for the flower and French Ultramarine and Leaf Green ink on the stem. Stamp the budding iris in the same tones as purple sprigs. Stamp the leaves in French Ultramarine and Leaf Green ink. You’ll need 3 small leaves. Stamp the small birdhouse in a combo of Sepia and Goldenrod ink. Die cut all the images with the coordinating dies. Stamp the ‘Let’s Celebrate You’ in a combo of Cactus Flower and Majestic Violet and then cut the words apart into separate sections. 

Sponge the centers of iris petals with Sunflower ink. Then use the Pink Peony over petals on both front and backside. Sponge the Garden Patina intermittently along the edges, then use the Cactus Flower along the edges as well. Add a light touch of the Majestic Violet. Sponge the iris images with the same. For the sprigs, use Cactus Flower and Garden Patina on the floral and a touch of Garden Patina and Leaf Green on the leaf. Use the same purple and green tones on the budding iris. Use the Leaf Green and French Ultramarine on the leaves. Use the Sepia and Goldenrod ink on the small birdhouse. Use the yellow sponge to apply a light touch of Crystal Lacquer on the iris petals and let dry. 

Use the HCFB1-5014 3D Iris Shaping Mold to shape the petals and leaves. Use the shaping stylus from Deluxe Flower Shaping Kit to shape the rest of the images. Using the hot glue, assemble the iris petals together to form 3 irises. Use one of the light green stem floral wire and attach the irises onto it as desired. Attach the frame onto card with dimensional adhesive, and place the rectangle panel through the center opening onto card. Attach the iris arrangement onto lower left of card and attach the birdhouse, leaves, sprigs and budding iris onto it as shown. Sponge the edges of sentiment with Cactus Flower and attach onto card as shown. Apply the Dries Clear glue onto yellow sponge and dab over card as desired, then sprinkle with Crystal Clear glitter. Apply the glue over yellow centers of petals and sprinkle with Mustard glitter.

Other Products: Hot Glue, Hot Glue Gun, Dimensional Adhesive, Funnel Tray, Scissors, Paper Trimmer, Diecutting Machine

Instructions:

My finished card size is 5" x 7". Make card base and cover with a piece of Sheet 6A. Edge this piece with Majestic Violet to make it stand out against the white cardstock.

Cut two of the Simply Classic Oval Frame die; one in white and one using a piece of Sheet 9B. Layer the two die cuts so the dark paper shows through behind the white piece. Adhere to card front using dimensional tape.

Stamp the flower petals onto Deluxe Flower Shaping paper using Majestic Violet ink. Stamp the leaves with Leaf Green ink. Cut out with coordinating dies. Color the leaves with Leaf Green and color the edges of the flower petals with Majestic Violet. I did just a bit of Buttercup ink in the center of the flower petals. Lay the flower petals and leaves onto the mold, spritz with water and run through die cut machine. Turn out onto desk to dry. Once dry add the yellow pollen to the flower petals and allow to dry. Shape the flowers and glue onto the EZ Stems using hot glue. Glue the leaves onto the stems to help hide them and make it look like the flowers are growing in the wild.  Tuck this piece behind the die cuts then cut out the sentiment from Sheet 12A and cut another tag out of white cardstock. Glue the tag to the white cardstock. This will give the tag a bit more thickness. I used Double Dots to adhere to the card front over the bottom of the floral piece.  

Glue two flat back pearls to the tag and the card is finished.  

Other Products: Die Cut Machine, Hot Glue Gun, Flat Back Pearls, White Cardstock, Dimensional Tape,

Instructions:

Cut a piece of white cardstock 5 10/16 x 5 10/16". Cut a piece of paper from the Iris Garden Paper Collection: to 5.5 x 5.5" adhere it to the base. Cut another two pieces to 4 15/16 x 4 15/16" and another one to 4 ,5 x 4,5", adhere them together, add a little bigger white cardstock. Cut out a window with die from the Cut Mat Create 2A Die Set. Cut out the sentiment from the Feathery Florals Paper Collection. Stamp 2 bird houses from Iris Garden Accents Cling Stamp Set in Toffee Crunch ink, color them and die with coordinating dies. Cut out a border with the Filigree Border & Accents Die Set. Adhere all elements to the base as pictured.

Stamp blossoms from the Iris Garden Petals Cling Stamp Set in Majestic Violet and ink onto Deluxe Flower Shaping Paper. Color their edges with the Cactus Flower ink and their centers with the Sunflower ink, diecut with coordinating dies and shape with mold. Add Pastel Bead Medium stamens to all flowers. Stamp blossoms from Lush Lilac Stamp Set in Majestic Violet and Cactus Flower inks onto Deluxe Flower Shaping paper and diecut with coordinating die. Shape them with Deluxe Flower Shaping tools and add some Ribbit Prills. Stamp leaves from the Iris Garden Petals Cling Stamp Set and 2 branches from the Leafy Accents Cling Stamp Set in Fern Green ink, color them with the Leaf Green ink, cut out with coordinating dies and shape with coordinating molds. Stamp branches from the Iris Garden Accents Cling Stamp Set in Fern Green ink, color them with the Leaf Green ink, cut out with coordinating die. Stamp branches from the Iris Garden Accents Cling Stamp Set in Majestic Violet ink, color them with the same ink and cut out with coordinating die. Stamp irises from the Iris Garden Accents Cling Stamp Set in Tuxedo Black ink, color them and cut out with coordinating die. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers and branches and add some pearls.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, colored pencils, pearls, sisal

Instructions:

Fold white cardstock to 9.5 x 4.5" with fold on the side then use die No. 1 from the Slim Elegant Rectangle Die to cut leaving the left side of the die over-hanging fold by about 1/4". Cut a panel for a front with the die No. 1 from the same set and Iris Garden Paper Collection. Glue all elements on. Cut out two frames with dies No. 2 and No. 3  from the same die set and a yellow frame with die No. 4. Cut out the sentiment from the Feathery Florals Paper Collection, adhere it as pictured.

Stamp blossoms from the Iris Garden Petals Cling Stamp Set in Majestic Violet and Sunflower inks onto Deluxe Flower Shaping Paper. Color their edges with the Cactus Flower and Sunflower inks and their centers with the Sunflower ink, diecut with coordinating dies and shape with mold. Add Pastel Bead Medium stamens to all flowers. Stamp blossoms from Lush Lilac Stamp Set in Majestic Violet and Cactus Flower inks onto Deluxe Flower Shaping paper and diecut with coordinating die. Shape them with Deluxe Flower Shaping tools and add some Ribbit Prills. Stamp leaves from the Iris Garden Petals Cling Stamp Set and 3 branches from the Leafy Accents Cling Stamp Set in Fern Green ink, color them with the Leaf Green ink, cut out with coordinating dies and shape with coordinating molds. Stamp branches from the Iris Garden Accents Cling Stamp Set in Fern Green ink, color them with the Leaf Green ink, cut out with coordinating die. Stamp branches from the Iris Garden Accents Cling Stamp Set in Sunflower ink, color them with the same ink and cut out with coordinating die. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers and branches and add some pearls.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, pearls, sisal

Instructions:

Card size: 4 3/4 x 6 3/4". Make a shaped card with the outer die of Decorative Circle Frames from white cardstock (see video). Using the largest circle die, cut out center of card, front only. Cut out yellow decorative paper with the same Decorative Circle die, use a slightly smaller circle to cut away center then glue to card front. Cut out largest Decorative Circle Frame “decorative” die from white, cut out center with the largest circle die then glue or pop up on card front.

Using the eyelet circles in the large circle die set and the eyelet circles in the Decorative Circle Frames die set, cut alternating eyelet layers from white and yellow ending with white. Stamp sentiment using Cactus Flower on the last white eyelet circle, glue stack of eyelet circles together. Cut another yellow decorative paper layer for the inside of card using the outer die of Decorative Circle Frames, glue it to the inside of card (you will have to trim a little off the top to avoid the score/fold of card) then glue the stack of eyelet circles centering to inside so that it shows as center when card is closed.

Stamp the Bucket using black, die cut then color and set aside. Stamp Irises using London Fog on some and Cactus Flower on some to create 3 flowers (3 1/2 flowers per flower used here), sponge with like colors, die cut. Stamp leaves using Fern Green then sponge with Leaf Green, die cut. Shape flowers and leaves in the shaping mold (see video). Finish shaping using the Deluxe Flower Shaping Kit. (Deluxe Flower Shaping Paper used for flowers and leaves).

Make a slit at top of bucket rim, using hot glue, glue 2 flowers and 3-4 leaves to look like they are inside the bucket. Pop up onto right bottom of card front, bend stems to go around circle opening.

Glue last flower to stem piece then glue leaf on top of stem and insert under bucket bottom then glue down to card bottom using hot glue, (Hot glue is best to make sure these 3D flowers stay glued to the card where you want them.

Glitter the flowers around all edges, glue the Flower Soft to Iris beards and then glaze leaves with lacquer. Randomly glitter card base.

Other Products: White cardstock, Copic Markers: E08, E09, E49, E97, yellow Flower Soft, hot glue

Instructions:

Fold a 4.5” x 7.5” piece of white card in half, place the outer bird cage die over the fold and diecut to create a shaped tent fold card base, which is flat across the top.

Die cut the birdcage solid die using white card and paper from the collection, adhere together. Die cut the decorative bird cage using paper from the collection and adhere to the solid shape. Adhere this panel to the front of the card base.

Stamp the sentiment onto white card using black ink and die cut using the slim lattice oval. Die cut a second decorative oval and adhere both outer pieces together. Edge the solid sentiment oval with the rose bud ink and secure the sentiment within the decorative oval at the top of the bird cage.

Make the flower: Stamp the largest iris petals x 3 onto flower shaping paper using the lilac posies ink. Add some copic colour to the centre  of the flowers (FY1), shade around the centre using daffodil delight ink. Diecut. Lightly colour the edges of the petals using rose bud ink and colour the reverse. Place into the mold face down, spritz with water and run through the diecutting machine to shape. Thread 6 pastel pearls stamen through the centre of 4 sets of petals and secure with hot glue. Snip a set of petals in half and use to fill any gaps. Sponge a small amount of dries clear adhesive to the edges of the flower and sprinkle with transparent glitter.

Make the leaves: Stamp 2 sets of lily leaves onto paper from the lily collection using northern pine ink, die cut and add additional colour to the edges using a dauber. Place face down into the mold, spritz lightly with water, and run through the die cutting machine to shape.

Hot glue the leaves and flower on top of a small amount of sisal to hold in place.

Other Products: White card, daffodil delight ink - Stampin Up!, sisal threads

Instructions:

Ready side fold card measures 7" × 7". Cut a mat from the designer paper collection measuring 6" × 6" and adhere it on the ready card base. Take a piece of white cardstock measuring 5.75" × 5.75", cut a decorative border using the die from Curvy Decorative Border Die Set as pictured. Take a piece of designer paper and cut it with Curvy die and adhere them on white cardstock mat . Stick this mat on the card as shown in the picture. Cut 2 borders, one from white cardstock and one from luxe gold cardstock using die from the same set. Glue both together and glue it on card as pictured.

Stamp classic rose flowers on deluxe flower shaping paper using magenta hue ink and cut with coordinating dies. Paint flowers with magenta hue and vibrant fuchsia ink. Shape flowers using round objects and layer them to create rose. Stamp flowers from Sweet pea stamp on deluxe flower shaping paper using seagrass archival and cut with coordinating die. Paint with the same ink and shape using a ball tool. Pierce the center of the flower and add stamen. Stamp classic rose leaves and Wild Aster Spray leaves using fern green ink and cut with coordinating dies. Paint leaves with leaf green and fern green ink and shape using flower shaping mold. Stamp an image from Feathery Floral stamp on watercolor paper using black archival and paint with zig markers. Cut with coordinating dies.

Arrange flowers and leaves on a card using hot glue. Stamp sentiment on card using magenta hue ink. For a finished look apply Crystal Clear on flowers and leaves using Art Glitter Clear Dries adhesive.

Other Products: Smooth white cardstock, Dimensional Tape, Watercolor Paper

Instructions:

The side fold card from the smooth white cardstock measures 5 1/2″ by 7 1/2″. Choose the pattern papers from the designer paper collection and create 3-dimensional layers keeping a white cardstock layer in between. Each layer is 1/4 of an inch smaller than the previous layer. 

Choose coordinating paper from the same paper collection and cut a border using the plain curvy die from Curvy Accent Border Die set. Cut the fancy layer separately from Luxe gold cardstock and adhere it aligning to the curved edge as shown. Next cut another fancy border using the same die and adhere it to the panel. Layer the prepared panel on the card front using foam dots. 

For Roses, stamp a few petals from the Classic Rose stamp set on Rajni Chawla's Vellum Flowerite cardstock using versamark clear ink and sprinkle gold heat embossing powder. Dust extras and heat set t using the heat tool. Cut the petals using their coordinating dies and color them using Seedless Preserves distress oxide. Sprinkle some water and shape them using 3D Rose mold. Shape them a little more using the Deluxe flower shaping kit and prepare 1 large, 2 medium, and 2 small roses. 

Stamp, color, and cut a few Wisteria flowers using Leaf Green Archival ink, color them in the center using the same ink and shape them using a flower shaping kit. Add flower beads using a glossy accent and use these flowers as fillers.

Stamp 2 sets of leaves using Leafy Accent stamp and Olive Green Archival ink and cut them using its coordinating die. Color the leaves using the same inks and shape them using a deluxe flower shaping kit.

Cut sentiment from paper collection and mat with gold. Once all the elements are ready, assemble the card as shown. 

Other Products: Smooth White Cardstock, Die Cutting Machine, Scoreboard, Foam tape, Funnel Tray, Versamark Ink

Instructions:

Prepare a white card base 6 x 8".  Top with a piece of the Iris Garden paper 1 /4” smaller; lay another piece of the Iris Garden paper 4 x 6” on top of that one.

Cur 4 of the corner dies from white card stock and adhere one to each corner. Using the tag die, cut out the sentiment and add to the top of the card.

Stamp 3 of the Leafy Accents on white with Cottage Ivy ink, color with Vivid Chartreuse and cut out with the coordinating die. Highlight the edges with more of the Cottage Ink, place in the matching mold and run through the die cutting machine to shape.  Place one on each side and one at the bottom.

Stamp the Wild Rose on white with the Deep Purple ink, color in with the Buttercup. Color some of the small ones with the Pink Peony and some with the Buttercup. Highlight the edges of the larger ones with the Majestic Violet ink. Place all the flowers in the matching mold and run through the die cutting machine to shape. Put 2 of the 2 largest flowers together making one flower. Add flowers around the leaves.

To finish, add glitter and prills.

Other Products: Paper Trimmer, Die cut machine.

Instructions:

Cut a piece of white card stock to 11 x 7 1/2” and score in half at 5 1/2” to form a 5 1/2 x 7 1/2” card base. Cut a piece from sheet 8B from the HCDP1-2127 Floral Butterfly Paper Collection measuring 5 1/2 x 7 1/2” and glue this to the card base. Now from sheet 11B cut a piece measuring 5 1/4 x 7 1/4” and adhere it to the card front. Next use the largest die from the HCD2-7424 Rectangle Filigree Frame Die Set to cut a piece of Luxe Silver Card Stock, white card stock, and a piece from sheet 1B from the Floral Butterfly Collection. Using Dries Clear adhesive and glue the white frame on top of the silver layer slightly offsetting them so that the silver peeks out from behind the white. Adhere to the base. Then using just the center piece from the piece cut from sheet 1B glue that inner piece in the center of the frame. Next use the second largest die from the same die set to cut out a Luxe Silver piece and the third largest die to cut out a piece from sheet 5A. Layer these two pieces together and adhere them to the card front using 3D foam tape. 

Using HCPC-31008 Wicker Basket Cling Stamp Set, stamp out 1 basket with Versa Color pigment ink onto white card stock. Heat emboss using white embossing powder. Also Stamp out the bow onto a piece of pink scrap paper from the paper pack using Magenta Hue ink. Die cut with the coordinating die then lightly ink the edges with HCDA1-449 Stack and Store Daubers to give the bow some added dimension. Now stamp out the full size Iris, the Iris buds, and the Spray 4x each from HCPC-31022 Iris Garden Accents Cling Stamp Set using Deep Purple, Periwinkle (for the sprays), and Olive Archival inks. Die cut with coordinating dies and ink the edges using the same colors to darken the edges. Add a small amount of Goldenrod Archival ink to the centers of the Irises. For the Sprays add Dries Clear Glue and sprinkle on Ice Queen Prills, set aside to dry. Using HCPC-31010 Basket Blooms cling stamp set, stamp out the lily stem 3x using Golden Rod and Olive Inks. Color lightly with Chrome Yellow and Leaf Green inks before die cutting with the coordinating dies. Using HCPC-31009 Basket Florals Cling Stamp set, stamp out the Rose Stem 1x in Magenta Hue and Leaf Green. Color in the same colors and die cut with the coordinating dies. Using HCPC-31006 Budding Rose Heart Cling Stamp Set, stamp out 3x one of the rose bud stems with Magenta Hue and Leaf Green. Color with the same colors and die cut with the coordinating dies. Using a Hydra Sponge and Dries Clear Adhesive lightly sponge glue over each bloom and sprinkle with Crystal Ultrafine Transparent Glitter.

Now simply arrange the stems gluing small bits in at a time for a well balanced look. Before adding the bow, take a piece of 1/8” white ribbon and ink using the Magenta Hue ink pad and a Stack and Store dauber. Stamp out a sentiment from HCPC-3845 Just For You Sentiments Cling Stamp Set in Deep Purple onto a tag from the Floral Butterfly Paper Collection and die cut using the coordinating die available in the HCD1-7202 Album Tags and Album Accents Die Set. Attach to the bow and add to project to finish off the bouquet.

To give the card the perfect finishing touch, use a piece of coordinating paper on the inside of the card from the beautiful Floral Butterfly Paper Collection. 

Other Products: 1/8" white ribbon, Ranger Chrome Yellow Archival Ink, 3D foam tape, 3D foam dots, Glue Gun, Glue Sticks, Scissors, Paper Trimmer, Die Cut Machine

Instructions:

Create card base using outer die HCD1-7367 Simple centrepiece die on white cardstock. Using the same die, cut one from white cardstock and one piece on pattern paper from the HCDP1-2150 Iris garden paper collection. Adhere both together and paste it on card base.

Now cut one decorative die from HCD1-7369 Elegant Hearts Centrepiece Die on white cardstock and one on luxe gold cardstock, adhere both together a little offset and adhere it on card using foam tape.

Stamp petals from HCPC-31020 Iris Garden Petals on white cardstock using archival ink-deep purple, sunflower and for leaves using archival ink-english ivy, cut them with coordinating HCD1-7456 Iris Garden Petals Die, color them using same ink,  shape them using HCFB1-5014 3D Iris Shaping Mold, add stamens and crystal clear glitter, as shown.

For small filler flowers stamp small iris petals using archival ink-sunflower, cut them using coordinating die, color them using same ink, shape them using 3D iris mold. Use one set of small petal and take another set of petal, cut it into half and adhere one half petal to another set and add one stamen and create a small filler flower.  

Stamp images from HCPC-31022 Iris Garden Accents Cling Stamp Set on white cardstock using archival ink-deep purple, English ivy, leaf green, cut them with coordinating HCD1-7458 Iris Garden Accents Die, color them using same ink and shape them using deluxe flower shaping tool kit. Arrange them as shown.

Cut one small die from HCD1-7367 Simple centrepiece die on white cardstock and add sentiment from  HCPC-3845 Just For You Sentments Cling Stamp Set using archival ink-deep purple, and adhere it using foam tape.

Stamp one hut images from HCPC-31022 Iris Garden Accents Cling Stamp Set on white cardstock using archival ink-deep purple, cut it with coordinating die HCD1-7458 Iris Garden Accents Die, color them using same ink and adhere it using foam tape as shown.

Other Products: Big Shot Plus Machine

Instructions:

Create a 4 x 9 inch card base in white cardstock. Cut the outer frame from the Slim Eyelet Heart Rectangle Die in purple paper from the Iris Garden Paper Collection and adhere. Cut the decorative die in lavender designer paper and adhere. Cut out the milk jug design from the paper collection with the inner die and adhere with foam tape.

Stamp the Iris Garden Petals Cling Stamp Set in Vibrant Violet, sponge with Sunflower and Vibrant Violet, cut out with coordinating dies and sculpt with the Iris Shaping Mold, add stamens and glitter. Stamp the leaves from the same set in Olive, sponge with Vivid Chartreuse and sculpt with the Iris Shaping Mold.

Stamp the sentiment from the For My Friend Sentiments Cling Stamp Set in Jet Black on white cardstock and cut out with the Circle Basics Large Die, layer with foam tape on the scallop circle die from the Decorative Circle Frames Die on purple designer paper.

Adhere iris, leaves and sentiment as shown.  

Other Products: White cardstock

Instructions:

Its a ready folded card measuring 9" by 6". Cut panel on deluxe card measuring 8 3/4 by 5 3/4" and adhere it on the card base using dimensional tape. Cut another panel on designer paper from Iris Garden Paper Collection sheet number 6A measuring 8 1/2 by 5 1/2" and adhere on the last panel using clear glue. Apply texture paste on the panel using stencil and cover with snowflake tinsel embossing powder and heat it using heating tool.

Trim the 2 strips from the designer paper add deluxe card underneath as a border and add as shown using dimensional tape.

Stamp the leaves on the deluxe paper using Magestic Violet Ink and add filler on the designer paper using lulu lavender ink, die cut the image using coordinating die. Shape the leaves in the shaping mold cover leaves and fillers with Nida Tanweer Magic Glitter.

For the Iris Flowers stamp the flower images on the light yellow cardstock using  Majestic Voilet ink, shape the petals in the mold and make few flowers using shaping kit and hot glue. Apply clear glue on the flowers using hydra sponge and cover the flowers with Nida Tanweer Magic Glitter.

Arrange all elemets as shown using hot glue, add lace, stamp the sentiment on the deluxe card using magestic Violet ink, die cut the sentiment using oval die and add as shown using dimensional tape.

Embellish the card using decorative beads.

Other Products: Stencil, Dimensional Tape, Hot Glue, Nida Tanweer Magic Glitter Powder, Decorative Beads, lace.

Instructions:

The finished card measures 9 1/4 x 4 1/2 inches. Cut one piece of white cardstock in deluxe flower shaping paper 9 1/4 by 9 inches and score at 4 1/2 inches to make a side fold card. Cut different pieces of paper from Iris Garden Collection as follows: 9 x 4 1/4 inches in green paper #4A and glue it on the white base, 8 3/4 x 4 inches from the white Deluxe flower shaping paper, 8 1/2 x 3 3/4 inches in violet paper #6A glue with on the white paper and glue it on the card base with 3D foam dots. In Deluxe flower shaping paper cut twice Slim Lattice Oval die and glue it on your base card.

Stamp your Iris flowers with Deep purple ink onto white flower shaping paper, color the center and shade the edge with the same color. Diecut with the coordinating die. Place face down into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe flower shaping kit tools and add Lion’s mane powder in the center. Glue 2 layers together (roll with your finger the first layer or add Petite pollen stamen).  

Also stamp and diecut leaves and fill in flowers with olive green and color it with zig markers. Make a bouquet with wire, put cheesecloth on your card and glue your bouquet over it.

Die cut a 1 3/4 x 3 inches in violet paper #9B. Cut sentiment from the Decorative Heart die in green paper and white paper. Glue them on the tag and add 3D crystal clear on it. Add two brads on each side and glue it under your bouquet. 

Other Products: Die cutting machine Cut’n’boss, heatgun, water mister, hot glue gun, hot glue, scissors, sewing tread, cheesecloth, brads 

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 10” x 7”, score at 5” along the long side and fold. Die cut the decorative edge from the front using the edge die from the HCD2-7403 Fancy Flourish Border Die. Cut a piece of pale yellow pattern paper 4 7/8” x 6 7/8” and adhere to the card inside back. Die cut the decorative die using the edge die and decorative die out of Deluxe Flower Shaping Paper. Add Frosting Powder to the die and then adhere to the card inside back as shown.

Die cut the other half of the decorative die from the HCD2-7403 Fancy Flourish Border Die using the decorative die and the edge die out of Deluxe Flower Shaping Paper. Add Frosting Powder using Dries Clear glue on a dry sponge. Cut a piece of purple pattern paper 6 3/4” and 3 3/4”. Using the decorative die as a guide die cut the edge using the edge die from the HCD2-7403 Fancy Flourish Border Die. Adhere the decorative die over the purple paper and then adhere to the left front of the card.

Stamp the leaf images from the HCPC-31020 Iris Garden Petals Cling Stamp Set in Olive ink on Deluxe Flower Shaping Paper. Colour the images with Leaf Green and Olive inks and die cut with the coordinating dies. Colour the backs of the leaves with Leaf Green ink and shape using the coordinating mold. Add 3D Crystal Lacquer to the leaves and allow to dry. Adhere the leaves to the front as shown with foam squares.

Stamp the flower images from the HCPC-31020 Iris Garden Petals Cling Stamp Set in Citrus Burst inks on Deluxe Flower Shaping Paper. Colour the centres of the flowers with Fresh Lemon ink. Colour the petals with Buttercream ink and die cut with the coordinating dies.   Colour the flowers on the backs with Buttercream ink and the edges with Sunflower ink.  Shape the petals using the coordinating mold. Pierce the centres of the petals and assemble the flowers. I have used 3 petals per flower - trim one set of petals in the centre. Insert gold glitter stamens in a petal that has been cupped inwards and add one trimmed petal using a glue gun.  Add the second complete set of petals cupped downwards and secure with hot glue.  Add the last trimmed petal to the centre of the petals facing downwards using the glue gun.  For the yellow and purple flowers I have used gold glitter stamens to the centres. Add Crystal Clear glitter using clear gloss gel medium on a paintbrush. Add Go Man Go Prills  to the flowers as shown. Trim the wires and adhere  over the leaves as shown. Roll a single petal to create a bud and add Crystal Clear glitter using clear gloss gel medium with a paint brush.  Adhere under leaves as shown.  

Stamp the small leaf images from the HCPC-31022 Iris Garden Accents Cling Stamp Set  in Olive ink on Deluxe Flower Shaping Paper.  Colour with Leaf Green ink and die cut with the coordinating dies.  Adhere around the flowers as shown.

Stamp the small floral accent images from the HCPC-31022 Iris Garden Accents Cling Stamp Set in Jet Black ink on Iris cardstock. Colour the images with Zig Clean Colour Clear Brush Markers and die cut with the coordinating die. Add Purple Flower Pearls and I Cannot Tell a Lilac Prills to the flowers and then adhere around the flowers.

Die cut two decorative tag dies from the HCD1-7203 Ornamental Tags Die out of silver cardstock. Adhere the tags together and adhere to the inside back of the card with foam tape.  Stamp the sentiment from the HCPC-3843 Special Birthday Sentiments Cling Stamp set in Deep Purple ink on purple pattern paper.  Die cut the sentiment out using the coordinating rectangle die and adhere to the front of the tag.

Stamp the small butterfly images from the HCPC-3953 Small Floral Butterfly Cling Stamp in Versamark Ink on vellum and heat emboss with silver embossing powder. Die cut with the coordinating dies and adhere the butterflies on the card as shown.

To finish ,add some pale blue iridescent gems to the butterfly bodies and the tag.

Other Products: Iris cardstock, clear gloss gel medium, paint brush, Altenew inks - Buttercream, Citrus Burst, Fresh Lemon, hot glue gun, Versamark ink, Pink Fresh Studio Jewels - Glacier, foam squares, Dress My Craft Purple Flower Pearls.

Instructions:

Cut out the white base of the card and fold it to 4" x 8 1/4". From the Iris Garden paper collection, cut a slightly smaller rectangle and glue to the base. Then cut a 3 1/4" x 7 1/2" rectangle out of white paper and a slightly smaller rectangle from the green and yellow paper collection and white paper, Glue the green rectangle to the card, and from the white and yellow ones, cut out one side using the Curvy Accent Border Die set and glue it as shown. Adhere it with Double Dots 100 pc. -3D. 

Stamp the Iris Garden Accents stamp with Memeto - Olive Grove ink, then ink it with Memento - New Sprout and Memento Olive Grove ink. And color the flower with  Memento - Paris Dusk.  Cut using the matching die. Stamp the birdhouse from the same set with Memento Toffee Crunch, ink it with the same ink, then cut it out with the matching die. Cover the opening with 3D Crystal Lacquer.

To make Iris , stamp flowers several times with Memento - Cantaloupe ink, then color them with the same color ink. Color the center of the flowers with Memento - Paris Dusk. Cut with coordinating die. Shape flowers with the Mold from the same collection. Fold the flowers and glue with hot glue. Add glue and add Prills.

To make the leaves, stamp several times the leaves from Iris Garden Petals  with Memento Olive Grove ink. Color the leaves withMemento - Olive Grove and Memento New Sprout ink. Form the leaves with the Mold from the same collection.

From white paper and paper from the collection, cut out the smallest elements
from the Slim Lattice Oval Die set. On the oval element, stamp the isentiment from the Frindship Sentiments set with black ink.

Glue all the pieces as pictured with hot glue. 

Cover the flowers and leaves with glue and sprinkle with glitter.

Other Products: Die Cut Machine, hot glue

Instructions:

Create a top fold card from a smooth white card stock measuing 7 1/2” x 5 1/2”. Choose the designer paper from Iris Garden Paper Collection and cut to size measuring 7” x 5”. Next, mat this paper on Luxe Gold Card stock measuring  7 1/4” x 5 1/4”. Mat this ready panel on white card base using glue.

Cut decorative die cuts from white card-stock and Luxe Gold card-stock using Swirly Accent Spray Die and Ornamental Tags. Stack these white and gold die cuts together, slightly offset. Also cut  designer paper using solid dies from same die sets. Adhere these die cuts to the card base as shown.

Stamp the flowers and leaves from the Iris Garden Petals Cling stamp set on Deluxe flower shaping paper using Coastal Coral archival ink for flowers and Fern Green archival ink for leaves. Now color the flowers by using Vivid Chartreuse archival ink in the center and  Lady Bug Memento ink on the petals. Color the leaves using Fern Green and Leaf Green archival ink. Cut the flowers and leaves using their coordinating dies and shape them using the coordinating 3D shaping mold. Now add yellow glitter to the centre of flowers.

Choose and stamp the images from Iris Garden Accents Cling Stamp Set on a smooth watercolour paper using Fern Green Archival ink. Paint all the images using Zig Clean Clear Brush Markers. Cut all the images using their coordinating dies. Add I Cannot Tell a Lilac prills to the foliage by using glue as shown in picture.

Stamp the leaves from Leafy Accents  Cling stamp set on Deluxe Flower Shaping paper with Olive Archival  ink and color them using Olive Archival ink and Vivid Chartreuse Archival ink. Cut the leaves using their coordinating dies and shape them using coordinating 3D shaping mold.

Once all the elements are ready, assemble all the ready elements as pictured. For final look, add crystal clear powder to flowers and leaves using Art glitter dries clear glue.

Other Products: Die Cutting Machine, Score Board, Bone Folder, Smooth White Cardstock, Scissors,double sided foam tape.

Instructions:

Card size is 4 wide x 9” tall. Using the largest Slim Eyelet Heart Rectangle Die, cut 2x from 4 1/4 x 9 1/4” white cardstock. Before cutting the second one, add double sided 1/2” tape to the side. Score that one just below the tape, remove the backing and adhere the two diecuts together to create the shaped card base. Use the same die to cut Garden Lily Paper Collection sheet 6B 2x, trim the side of one to fit inside the card, ink the edges of both using Deep Purple ink and adhere to the inside and front of the card base. Using the smallest eyelet die, cut from white cardstock, stamp the sentiment ‘Just a Note to Cheer you’ from the Cheerful Note Sentiment Cling Stamp Set using Deep Purple ink and adhere to the inside of the card. Using the same die set, cut the decorative frame and the largest eyelet rectangle, sponge with dries clear adhesive and cover with Rajni Chawla’s Crystal Clear glitter. When dry, adhere to the card front.

Stamp the Irises 2x in Deep Purple and 2x in Buttercup Archival inks on Deluxe Flower shaping Paper. Color with the same colors and diecut using the coordinating dies. Add additional color to the backs and edges of the petals and color the beards of the purple one using Daffodil Delight Stampin’ Blend marker. Add additional color to the edges. Place the flowers in the 3D Iris Shaping Mold, spritz with water and run through the diecutting machine. Use the Deluxe Flower Shaping Kit for additional shaping. Add dries clear adhesive to the beards of the irises and cover with glitter. Use Lion’s Mane glitter on the purple flower and Orange Crush glitter on the yellow flowers. Pierce holes in all the petals, insert a stamen and adhere the petals together using hot glue.

Stamp the leaves from the Garden Lily Cling Stamp Set on Deluxe Flower Shaping Paper using Archival Olive ink, color using the same ink and diecut using the coordinating die. Add additional color to the edges and color the backs of the leaves. Place in the Garden Lily shaping mold, spritz with water and run through the die cutting machine.

Using a paint brush, add dries clear adhesive to the flowers and leaves and sprinkle with Rajni Chawla’s Crystal Clear glitter. Adhere the flowers to the EZ Stem Floral Wire using hot glue and adhere to the card front along with the leaves using hot glue.  

Other Products: White Cardstock, Diecutting Machine, Misti, Hot Glue Gun, Funnel Tray, Paint Brush, Paper Trimmer, Double Sided Tape, Daffodil Delight Stampin’ Blend Marker

Instructions:

Cover a 9" x 4" card blank with yellow paper from the Iris Garden Paper Collection. Die cut three Slim Elegant Rectangles, shaped inner edges, from the Slim Elegant Rectangles Die Set. Two in white card and one in Luxe Silver card. Adhere with Dries Clear Adhesive together so that you can see the silver card as a slight shadow. Adhere to card front. Die cut another one in green paper from the same paper Collection. Adhere the centre piece only to the card front. Die cut the next size down centre piece die in white card and the next size down again in yellow paper from the Paper Collection, adhere with foam tape.

Stamp onto Deluxe Flower Shaping Paper in Ranger Archival Olive ink, three sets of Iris Garden Petals. Die cut with the matching dies. Color the edges with Olive ink using a Dauber. Add a little Memento Grape Jelly ink using a Dauber. Place in the Iris Garden Flower Shaping 3D Mold, lightly mist with water and run through a die cutting machine. Lightly shape and curl the petals with the stylus from the Deluxe Flower Shaping Kit. Pierce a hole in each petal with the tool from the Deluxe Flower Shaping Kit. To make two small Irises, start with a white Bead Stamen, thread on small petals set, face down, squish together and add Dries Clear Adhesive. Add a small set of petals, face up, followed by a medium set, face up. Cut one medium set of petals in half and add an extra petal. Repeat. Make a large Iris by starting with a medium set of petals for the bud, followed by two sets of large petals. Add hot glue to the base and offset the petals as you go. Adhere the large Iris to the centre of the card, adhere the two smaller Irises to either side.

Stamp onto Deluxe Flower Shaping paper in Olive ink, three sets of Iris Garden Accents, from the Iris Garden Accents Cling Stamp Set. Color with Olive, Grape Jelly and Ranger Archival Sunflower inks using the Daubers. Die cut with the matching dies. Lightly shape with the stylus from the Deluxe Flower Shaping Kit. Adhere into the Iris bouquet with hot glue. Adhere the birdhouse with foam tape. Stamp two small Dragonflies from the Decorative Dragonfly Collection in Olive ink. Color with Grape Jelly and Sunflower inks using the Daubers. Adhere one on top of the other. Adhere to side of birdhouse.

Stamp a sentiment from the Just For You Sentiments Cling Stamp Set, onto white cardstock in Olive ink. Die cut with the smallest die from the Slim Elegant Rectangle Die Set. Adhere with foam tape. Sponge Dries Clear Adhesive over the card, add clear glitter.

Other Products: Card blank - 9" x 4", white card, Memento Grape Jelly ink pad, water mist bottle, die cutting machine, foam tape, hot glue, clear glitter.