Instructions:

Make a card base using white card stock measuring 6 inches by 6 inches. Add a mat layer of 5 3/4" inches by 5 3/4" inches using dark green Card stock. Adhere to the card base. Cut a square frame panel from the pattern paper and remove the inner window using a paper cutter. Add this on Luxe Gold card stock and keeping a thin border all around cut out of a gold frame and add to this frame.

Cut another piece of square card panel from the pattern paper. Cut the frame  border out remove and then add to the card front. Adher the gold window frame on this in a tilted manner.

Cut a piece of white die cut from the Diamond Fleur die set. Trim it and add to the bottom of the frame.

Stamp the Iris flowers from the Iris flower stamp set in Majestic Violet and the purple colour and in Sunflower Archival ink on Deluxe flower shaping paper. Shade the flowers using the archival inks using sponge daubers. Then shape the flowers further in the Deluxe flower shaping kit and make flowers in the shades of purple and yellow.

Stamp the Iris flower leaves in English Ivy Archival ink on Deluxe Flower Shaping paper and colour with the blend of Fern green and leaf green ink.

Make Small filler flowers using the smallest flower stamp from the classic Rose stamp set colour with leaf green ink and cut with the matching die.Shape them in the flower shaping kit and add a pearl stamen from the bridal bouquet stamens.

Stamp the bird house in black archival ink on Deluxe Flower Sshaping paper and distress them with the shades of brown. Cut with matching die and add on a small circle and add to the card. 

Arrange the flowers and the leaves along with the moss was on the card front using hot glue.

Stamp the sentiment in black ink cut in small parts and add to the card.

Stamp a small butterfly in white pigment ink on vellum paper and add opaque white pigment  powder. Heat set with heat gun and cut with matching die. Add this to finish the card.

Other Products: Distress inks- vintage photo, Ground walnut, Die cutting machine, scoring board, hot glue gun, glue sticks, moss

Instructions:

Create a 6 x 6 inch card base in white cardstock. Cut a 5.5 x 5.5 inch piece of blue paper from the Iris Garden Paper Collection, cut out the center with the Elegant Hearts Centerpiece Die and adhere the inner piece to center of card, adhere outer piece with foam tape. Cut out the Elegant Hearts Centerpiece Die in white cardstock and adhere.

Stamp the Iris Garden Blooms Cling Stamp Set in Jet Black, cut out with coordinating die and sponge with Vivid Chartreuse, Iris, Sunflower and Vibrant Fuchsia. Adhere with foam tape on the left side of opening.

Stamp the Iris Garden Petals Cling Stamp Set in Iris and Vibrant Violet, sponge with Vivid Chartreuse and Iris, and the Vibrant Violet with Vivid Chartreuse, cut out with coordinating dies and sculpt with the Iris Shaping Mold, add stamens and glitter. Stamp the leaves from the set in Olive, sponge with Vivid Chartreuse, cut out with coordinating die and sculpt with shaping mold.

Stamp the sentiment from the Cheerful Note Sentiments Cling Stamp Set in Jet Black on white cardstock and cut out with the Arrows and Banner Die.

Adhere leaves, iris and sentiment as shown.  

Other Products: White cardstock

Instructions:

Cut a piece of white card stock to 11 x 7 1/2” and score in half at 5 1/2” to form a 5 1/2 x 7 1/2” card base. Cut a piece from sheet 9B from the HCDP1-2150 Iris Garden Paper Collection measuring 5 1/2 x 7 1/2” and glue this to the card base. Now from sheet 2B cut a piece measuring 5 1/4 x 7 1/4” and adhere to the card front. Next use the largest die from the HCD2-7384 Fancy Classic Rectangle Die Set to cut a piece from sheet 6B and ink the edges of this paper with Deep Purple Archival Ink using HCDA1-449 Stack and Store Daubers. Attach this piece to the card base with 3D foam tape. Now using the second largest die from the same set cut 3 pieces, 1x each from Luxe Silver Card Stock, white card stock, and a piece from sheet 5B from the Iris Garden Collection. Using Dries Clear adhesive, glue the white frame on top of the silver layer slightly offsetting them so that the silver peeks out from behind the white. Adhere this to the blue base just attached to the card base in the previous step. Then using just the center piece from the piece cut from sheet 5B, glue that inner piece in the center of the frame using 3D foam dots.

Using HCPC-31021 Iris Garden Blooms Cling Stamp Set, stamp out the large image 2 times with Memento Tuxedo Black Ink onto Copic X Press It paper. On the first image color the entire image with Copic Markers in colors to match the papers. On the second image just color the images that coordinate with the inner dies that cut out the individual flowers. Die cut all colored images with the coordinating dies, and pop up the individual images on top with 3D foam dots. Arrange this to the top of the card. Top Tip: For a deepened look, trim a little of the white edges away from the top images and darken the edges of the Irises for a more dramatic look.

Stamp a sentiment from the HCDC-3848 Cheerful Note Sentiments onto a piece of white card stock using Versamark Ink. Heat emboss using a Blue Embossing Powder. Now cut the sentiment out using the HCD1-7204 Arrows & Banners Die Set. Also cut a banner from Luxe Silver Card slightly larger than the sentiment banner to put behind for a layered look. Now attach to the front of the card.

For the inside of the card simply cut a piece from sheet 6B measuring 5 7/16 x 7 1/2 and glue to the inside of the card. Cut the 3rd largest die from the Fancy Classic Rectangles die set twice, 1x in Luxe silver and 1x in white card stock. Using the silver frame piece and the white inside piece glue to the center of the card to create a silver framed white area for the message to be written. 

Other Products: Copic X Press It Paper, Copic Markers, Versamark ink, Blue Embossing Powder, Heat Gun, 3D foam Tape, 3D Foam Dots, Scissors, Paper Trimmer, Die Cut Machine

Instructions:

Score a 10" x 7" piece of Deluxe Flower Shaping paper at 5" and fold at the score line to create a 5" x 7" card base. Cut a 4 3/4" x 6 3/4" piece of pattern paper from Iris Garden paper collection and adhere it on the card base.

Die cut a piece of Luxe Gold cardstock using the dies from Simply Classic Oval Frame die set and adhere it on the cardbase using foam tape. Die cut a piece of white cardstock using the oval die from the same set and adhere it on the gold die cut using foam tape.

Stamp the image from Iris Garden Blooms Cling Stamp set on a piece of Deluxe Flower Shaping paper using Jet Black Archival ink and colour it with watercolours. Die cut this imge using the matching die from  Iris Garden Blooms die. Cut the bottom portion of the stems in oval shape to match the white oval die cut. Adhere it on the white die cut using foam tape.

Other Products: Altenew watercolor set and double sided foam tape.

Instructions:

The ready side-fold card measures 6″ by 8″. Cut a smooth white cardstock measuring 12″ by 8″ and score it at 6″ on the longer side. Crease and score it well using a bone folder. Choose a pattern paper from the designer paper collection and cut measuring 5 1/2″ by 7 1/2″. Mat it on the Luxe Gold cardstock creating a delicate border of 1/16″ on all sides. Layer the panel on the card base using foam dots. 

Using Royal Elegance Frames Die, cut 2 pieces of fancy frames one each from Luxe Gold cardstock and white cardstock, and glue them together keeping the white on top. Layer the prepared frame on the white solid shadow die cut using tiny glue dots.

Also, cut one fancy label from white cardstock and one gold label from Luxe Gold cardstock using Album Tags and Accents Die. Cut 2 ornamental tags in gold using Ornamental Tags Die and paste them together to create a fancy banner. Cut the sentiment in white using the same die set and layer all the die cuts together using foam dots to create the focal element for the card.

For Iris flowers, stamp multiple petals of Iris Garden Petals on Deluxe Flower Shaping paper, using Majestic Violet Archival ink, and cut them using its coordinating die set. Color the petals using Sunflower yellow and Majestic Violet archival ink. Mist the petals and shape the flowers using a flower shaping kit. Prepare 2 medium-sized flowers. 

Cascading Wisterias are first stamped with Cactus Flower Archival ink, cut with its coordinating die, and then colored using the same ink. Once all colored these are shaped using Deluxe Flower Shaping Kit and add glitter balls to the center.

Stamp and cut foliage using the Leafy Accent stamp set and the Holly Berry Spray Cling Stamp Set. Cut them using their coordinating die set and color them using the Leafy Green Archival ink. Shape them a little and arrange them in the bouquet. 

Once all the elements are ready, assemble a small bouquet on the left-side corner and finish the card by adding Rajni Chawla's Crystal Clear glitter to the flowers. 

Other Products: Smooth White Cardstock, Funnel Tray, Die Cutting Machine, Foam dots, ScoreBoard.

Instructions:

Card size:  4 3/4" x 6 3/4". Using Heavy weight vellum, make a shaped card with the outer die of the Elaborate Oval Frames. Start by folding a piece of vellum to be at least 5 x 7” then place the die over-lapping the fold by about 1/4". Cut another front from vellum using the same die and set aside. Cut the decorative die of the Elaborate Oval from white, glue it to the vellum front. Put glue on the front piece only where you see the white decorative die so that it does not show when glued to the card base. Die cut the smaller decorative die from white, glue to the card front. Stamp the sentiment using Deep Purple on vellum then cut with the smallest oval, glue it inside the smaller decorative white die cut. Glitter the card front.

Stamp Iris flower on Deluxe Flower Shaping Paper 3 times per color (Cactus Flower and Deep Purple) for each flower. Sponge stamping color along with yellow on each petal.  Cut 1 double petal in half so that top has 3 petals and bottom has 3 petals, (3 petals makes it easier to glue flat to the card vs 4 petals top and bottom). Use hot glue to adhere top to bottom of each Iris. Glue stems to flowers in back. Fill flower beards with Flower Soft.

Stamp leaves on Deluxe Flower Shaping Paper using Fern Green, sponge with Leaf Green, die cut then shape. Glue 2 leaves to the stems then glue flowers and stems to card on left side around sentiment. Glitter edges of petals only.

Other Products: Yellow Flower Soft, hot glue

Instructions:

Card size is 9 x 4" (final size). Cut border die on white folded cardstock using die from HCD3-Slim Eyelet Heart Recatangle Die. Using same die set, cut another layer of Eyelet Heart Frame Die on luxe gold cardstock. Take pattern paper from HCDP1-2150 Iris Garden Paper Collection, cut it and layer it using die from HCD3-7432 Slim Basic Rectangle Die and adhere it on card base using designer dries clear adhesive. Using die HCD3-Slim Eyelet Heart Rectangle die, cut layer on pattern paper, adhere it using foam tape. Cut another layer on luxe gold cardstock adhere it using foam tape. Another layer on white cardstock, adhere it using designer dries clear adhesive. Cut sentiment die on luxe gold cardstock, adhere it using designer dries clear adhesive.

Stamp petals from HCPC-31020 Iris Garden Petals on white cardstock using archival ink-deep purple, sunflower, cut them with coordinating die HCD1-7456 Iris Garden Petals Die, color them using same ink,  shape them using HCFB1-5014 3D Iris Shaping Mold, add stamens and crystal clear glitter, as shown.

Stamp images from HCPC-31022 Iris Garden Accents Cling Stamp Set on white cardstock using archival ink-English ivy, Encore Ultimate Metallic Ink Pad-gold, cut them with coordinating die HCD1-7458 Iris Garden Accents Die, and shape them using deluxe flower shaping tool kit.

Arrange them as shown.

Other Products: Big Shot Plus Machine.

Instructions:

Ready tent fold card measures 9.5" × 4.5". Cut a mat from designer paper collection measuring 9.25" × 4.25", adhere it on ready card base. Cut a piece of another designer paper measuring 2.5" × 8" and glue it on card as pictured. Cut a frame from white cardstock using die from Slim Eyelet Heart Rectangle die set. Take a piece of white cardstock and adhere designer paper on it. Cut a frame using largest die from the same set. Glue it on card using double dots. Glue decorative frame on it using foam strips. 

Stamp Clematis flower on deluxe flower shaping paper using buttercup ink and cut with coordinating die. Paint flowers using same ink and shape using stylus. Pierce center and add stamen. Stamp leaves from Classic Rose and Iris Garden fillers stamp using fern green ink and cut with coordinating dies. Paint leaves using leaf green ink fern green ink. Shape using stylus. Stamp some more fillers from Iris Garden stamp using cactus flower ink and cut with coordinating die. Arrange all the elements on card using hot glue as pictured.

Stamp sentiment on white cardstock strip using black archival and distress it with leaf green ink. Slightly curve it using round object and glue as pictured. For finished look apply Crystal Clear on flowers and leaves using Art Glitter Clear Dries glue.

Other Products: Smooth White Cardstock

Instructions:

Cut a piece of white cardstock 5 10/16 x 5 10/16". Cut a piece of paper from the Iris Garden Paper Collection: to 5.5 x 5.5" adhere it to the base. Cut another two pieces to 5 2/16 x 5 2/16" and another one to 5.5 x 4", add a little bigger two white cardstocks. Cut out a silver and a white frame with Simply Elegant Centerpiece die. Cut out a silver and a white frame with die No. 2 and 3 from the Rectangle Filigree Frame Die.  Adhere all elements to the base as pictured.

Cut 2 pieces of paper from the Iris Garden Paper Collection: to 5.5 x 5.5" adhere them inside of the base. Cut out a heart with die No. 2 from Decorative Heart Die Set. Stamp the sentiment from Elegant Rose Sentiments Cling Stamp Set in Tuxedo Black ink and cut it out with coordinating die. Adhere it to the heart. Cut out a strip of paper from the Iris Garden Paper Collection to 0.5 x 5.5" and score it at 0.5", 2", 4 3/4". Fold it to get a piece of pop-up element. Adhere a heart at the longest part of the strip and adhere the whole pop-up element to the card as pictured.

Stamp blossoms from the Iris Garden Petals Cling Stamp Set in Sunflower ink onto Deluxe Flower Shaping Paper. Color their edges and their centers with the Sunflower ink, diecut with coordinating dies and shape with mold. Add Pastel Bead Medium stamens to all flowers. Stamp blossoms from Cottage Garden Hydrangea Cling Stamp  in Buttercup ink onto Deluxe Flower Shaping paper and diecut with coordinating die. Shape them with Deluxe Flower Shaping tools and add some Orange Juice Prills. Stamp leaves from the Leafy Accents Cling Stamp Set in Fern Green ink, color them with the Leaf Green ink, cut out with coordinating dies and shape with coordinating molds. Stamp branches from the Iris Garden Accents Cling Stamp Set in Fern Green ink, color them with the Leaf Green ink, cut out with coordinating die. Stamp branches from the Iris Garden Accents Cling Stamp Set in Sunflower ink, color them with the same ink and cut out with coordinating die. Stamp iris from the Iris Garden Accents Cling Stamp Set in Tuxedo Black ink, color it and cut out with coordinating die. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers and branches and add some pearls.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, colored pencils, pearls, sisal

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 10” x 7”, score at 5” along the long side and fold to create a base card of 5” x 7”. Cut a piece of silver cardstock 5” x 7” and adhere to the front of the card. Cut a piece of green pattern paper 4 7/8” x 6 5/8” and adhere to the front of the silver cardstock.

Cut a piece of light pattern paper using the No. 1 die from the HCD2-7338 Lattice Flourish Gateway Die. Die cut a decorative frame and gate using the dies from the HCD2-7338 Lattice Flourish Gateway Die out of Deluxe Flower Shaping Paper. Die cut the top half of the frame out of silver cardstock, trim and adhere behind the white decorative frame slightly offsetting the silver. Add Frosting Powder to the frame and also the gate using Dries Clear glue and adhere to the background paper and then adhere to the front of the card. Add a silver inlay at the top of the frame. Add the gate to the frame using foam strips.

Stamp the accent images from the HCPC-31022 Iris Garden Accents Cling Stamp Set in Jet Black ink on Iris cardstock. Colour the images with Zig Clean Colour Real Brush Markers and die cut with the coordinating dies. Add 3D Crystal Lacquer to the iris images.

Stamp the bucket image from the HCPC-3964 Rustic Sunflower Bucket Cling Stamp Set in Jet Black ink on Iris cardstock. Colour the images with Zig Clean Colour Real Brush Markers and die cut with the coordinating die. Cut a slit along the edge of the bucket and add the irises inside the bucket and then adhere the bucket to the front of the card as shown.

Adhere the birdhouse to the right above the gate using foam squares. Add Purple Flower Pearls and I Cannot Tell a Lilac Prills to the flower accents and then adhere around the iris flowers. Add the leaves around the bucket as shown.

Stamp the bird images from the HCPC-3956 Birdhouse and Trellis Cling Stamp Set in Jet Black ink on Iris cardstock. Colour the images with Zig Clean Colour Real Brush Markers and die cut with the coordinating dies. Adhere the birds on the birdhouse, bucket and around the bucket as shown with small foam squares.

Stamp the small butterfly images from the HCPC-3953 Small Floral Butterfly Cling Stamp in Versamark Ink on vellum and heat emboss with silver embossing powder.  Die cut with the coordinating dies and adhere the butterflies on the card as shown.

To finish, add some pale blue iridescent gems to the butterfly body.

Other Products: Iris cardstock, foam squares, Dress My Craft Purple Pearls, Ranger Silver Embossing Powder, Pink Fresh Studio Jewels - Glacier, Versamark ink

Instructions:

Create a card base 5 x 7" from the white Deluxe Flower Shaping paper. Use the Filigree Accents Die to cut a decorative border on the card front. Cut a piece of Luxe Gold Cardstock and cut out the Filigree Accents on this then glue behind the white decorative border. I offset the two pieces to just let the gold show through a bit behind the front border. Cut  2 1/4 inch pieces of the Gold and lace on the edges of the front of the card as shown. Cut a piece of Sheet 3A of Garden Lily paper to fit on the inside of the card. Glue down and set aside.

Stamp the Garden Lily flowers on white card stock with the Vibrant Fuchsia and color in with the pink Peony.  Cut out with the coordinating die. Highlight the edges with more of the Vibrant Fuchsia ink and place in the matching mold. Run through the die cut machine to shape.  Add the Rock Candy stamens to the center of 2 of the petals making one flower.

Stamp the leaves on white card stock with the Cottage Ivy, color with the vivid chartreuse. Cut out with the coordinating die. Highlight the edges with more of the Cottage Ivy ink. Place in the matching mold. Run through the die cut machine to shape.

Add the flowers and leaves to the front of the card.

To finish, add glitter to all the leaves and flowers

Other Products: Paper trimmer, Die cut machine, Hot glue gun,

Instructions:

My Finished card is 6" x 6". Make card base out of Deluxe Flower Shaping Paper. Cover with a piece of Sheet 5A of the paper Collection. Die cut the Stairway Gardens out of white cardstock and glue down onto card front.  

Stamp the Iris Garden Bloom three times. Once in Leaf Green and twice in Cactus Flower. Color the green blooms with Stack and Store Daubers and Leaf Green ink. Color the two that are stamped in Cactus Flower with Cactus Flower. Cut out with coordinating dies. Use the Deluxe Flower Shaping kit to shape the blooms so they have a bit of dimension then glue down onto the base piece. Adhere to card front using dimensional tape.

Cut out one of the tags from Sheet 12A of the paper collection. Cut out a tag from white cardstock and glue the two together giving the tag more stability. Stamp the sentiment onto the tag and use dimensional tape to adhere to card front. The card is finished.

Other Products: Die Cut Machine, Dimensional Tape, Woodland Scenics Yellow Pollen, White Cardstock

Instructions:

Fold a 12” x 6.25” piece of white card in half and place the largest simple centrepiece die over the fold. Die cut to create a tent fold card base. Cut the largest simple centrepiece die using white card and a 2nd diecut using paper from the paper collection. Adhere together and adhere to the card base. Die cut the decorative elegant hearts die using luxe gold card and adhere to the card base.

Die cut the hexagon from the elegant hearts die set using black paper from the collection and from white card. Die cut the small decorative elegant hearts die using green paper from the collection. Layer these together and adhere to the centre of the card base using foam pads.

Stamp the sentiment onto green paper using black ink and use the centre dies from the slim elegant rectangle to die cut, use the next size up to create a luxe gold layer and adhere together. Layer onto the card using foam pads.

Make the flowers: Stamp the sunflowers using Lilac posies ink onto flower shaping paper. Colour using the same ink and increasing the colour towards the centre. Add rhubarb stalk to the centre of the flower. Die cut and shape using the flower shaping tools. Place a dot of hot glue in the centre of each set of petals and cover with heart of gold prills, allow to cool and remove excess.

Make the leaves: Stamp the leaves using olive grove ink onto the green paper from the collection and diecut. Add a little shading using daubers to add more olive grove ink, place face down into the mold, spritz with water and run through the die cutting machine to shape.

Position the flowers and leaves and secure with hot glue.

Other Products: White card, hot glue, foam pads

Instructions:

Take a 9" x 4" tent fold card blank, adhere dark pink paper from the Friendship Rose Paper Collection, using Designer Dries Clear Adhesive. Die cut one Slim Lattice Oval Die in white card. Cut out a piece of pale pink paper from the Paper Collection to fit the Slim Lattice Oval die cut. Adhere die cut to the pink paper. Adhere this to a piece of medium pink paper from the Paper Collection cut to 3 1/2" x 8 1/2". Using the centre Oval from the Slim Lattice Die Set, die cut the outside edge in dark pink paper from the Paper Collection. Adhere the small pink oval outside edge die cut to the centre of the card. Stamp a Sentiment from the Friendship Sentiments Cling Stamp Set in Memento Lilac Posies ink onto white card. Die cut with the small oval from the Slim Lattice Oval Die Set. Adhere to centre of small pink oval with foam tape.

Stamp in Memento Lilac Posies ink, onto Deluxe Flower Shaping Paper, six sets of Classic Roses from the Classic Roses Cling Stamp Set. Color with the same ink using a Dauber. Die cut with the matching dies. Ink the edges in Lilac Posies ink.

Stamp six sets of leaves from the Classic Rose Cling Stamp Set in Ranger Archival Leaf Green ink onto Deluxe Flower Shaping Paper. Color with the same ink using a Dauber. Die cut with the matching dies. Place in the 3D Rose Shaping Mold, along with the Roses, lightly spritz with water and run through a die cutting machine. Tap out and lightly shape with the Stylus from the Deluxe Flower Shaping Kit on the reverse. Ink the edges in Leaf Green ink.

Make six buds using the  small Classic Rose Petals. Use one set of small petals for the small Roses. Add two sets of small petals for the medium Roses and three sets for the large Roses. Apply Dries clear glue to the reverse and bring all the petals up into the middle, one layer at a time, hold for a few moments to allow the glue to dry. Add three layers of the same sizes of petals for all Roses. Add petal layers to each bud with Dries Clear Glue. Off-set the petals as you go. Make two large, two medium and two small Classic Roses. Adhere the leaves to the back of the Roses. Adhere the Roses in a line to either side of the Sentiment using hot glue, starting with the large Roses.

Sponge Dries Clear Adhesive over the card, add clear glitter. All done.

Other Products: Card blank- 9"x4", white card, foam tape, water spray bottle, die cutting machine, hot glue, clear glitter.

Instructions:

Card size:  4 1/4" x 5 1/2". Score white cardstock at 2 1/8” and 4 1/4" then fold into a Z-Fold card. Cut 3 pieces of light blue decorative paper to fit, 1 for each panel, leaving a slight white border.

Cut several layers of grass border from green decorative paper, set aside.

Stamp all images using London Fog Memento, die cut each then color with alcohol inks. Stamp sentiment using Cactus Flower Ink, die cut with circle, die cut frame with slightly larger circle from Raspberry color cardstock.  Cut Delicate Daisy corner from white.

Open card flat then glue Daisy Corner to right top corner f card. Glue sentiment to center panel top. Glue bird house and fence to left panel.  Glue 1 bird to birdhouse, glue other bird to fence top. Glue grass borders in layers leaving all grass tops open (so that you can stick flower stems into grass layers).

Arrange how you want flowers then glue to card.  Glitter card.

Other Products: White cardstock, Raspberry color cardstock, London Fog Memento Ink, grass border punch, Copic Markers: V01, V12, V15, YG03, YG23, YG17, RV10, RV00, RV55, RV17, Y11, Y15, Y19, B21, B24, C1, C2, C3, C5, E50, R43, R24

Instructions:

This side fold card measures 6 inches by 6 inches. To create a card base - cut out a 12” x 6” piece of white cardstock and score it at 6” (long side up). Fold using a bone folder along the score lines, then die cut it using the largest HCD1-7367 Simple Centerpiece Die. Using the same die to cut a green paper from Frienship Rose Collection, ink the edge with coastal coral ink and adhere it to the card front.Die cut shape in white cardstock with HCD1-7369 Elegant Hearts Centerpiece Die, then adhere it to the card. 

Make the Wild Aster flowers. Stamp using coral ink onto flower shaping paper, color the centre with sunflower and shade the rest of the flower using the same coral. Diecut with the coordinating die. Spritz with water and give further shape with Deluxe flower shaping kit tools. Put stamens in in the centre of the flowers with hot glue. Made 1 big flower, 1 small and also 2 bud flowers. Also stamp, color and cut 3 leaves in leaf green ink from the same collection.

Cut a piece of white paper 4 x 1 inches. Stamp sentiments from For my friend kit with coral ink and ink the edge with the same color. Glue it on your card. 

Stamp flowers from Iris garden accent in olive green ink and color iwith the zig markers. 

Put cheesecloth and sewing thread on your card. Make a flowers and leaves arrangement to the left of your sentiment.  For the final touch, add yellow stamens.

Other Products: Machine cut'n boss, scissors, water mister, hot glue gun, cheesecloth, sewing thread,

Instructions:

It's a ready folded card measuring 9" by 6" made from cream cardstock. Cut panel on Gold Luxe card measuring 8 3/4 by 5 3/4" and adhere it on the card base using dimensional tape. Cut another panel on cream card measure 8 1/2 by 5 1/2", stamp the image from Ornate Peacock Cling Stamp Set, cover it with golden embossing powder and heat the image using heating tool. Adhere this layer on the last panel using clear glue. 

Add lace on the card base using hot glue as shown in the background of the window.

Next, stamp the image of window on the cream card using versamark embossing ink cover the images with golden tinsel embossing powder and heat it using heating tool. Die cut the images using coordinating dies, add extra layer underneath, add foam strips from the back also from the back side of window.

Stamp the upper part of window image again on the gold luxe card using versamark embossing ink, cover the images with golden tinsel embossing powder and heat it using heating tool die. Cut the images using window border coordinating die and adhere on the window.

Stamp the image from ornate peacock stamp set on the vellum using versamark embossing ink cover the images with golden tinsel embossing powder and heat it using heating tool. Die cut the images using coordinating die.

Stamp the image of Iris flower on the vellum using versamark embossing ink cover the images with golden tinsle embossing powder and heat it using heating tool die cut the images using coordinating die.

Stamp the images of Rustic Sunflower on the cream card using versamark embossing ink cover the images with golden embossing powder and heat it using heating tool. Die cut the images using coordinating die. Shape the flowers using Deluxe Shaping Kit and make a few flowers using hot glue, add golden stamens in the centers, apply clear glue using sponge and cover the flowers with Nida Tanweer Magic Glitter Powder.

Arrange bunch on the left side of the window as shown using all ready elements and with Rose Hip Stamens.

Embellish the card with rhinestones, pearls, and Paper Magik Decorative Beads.

Other Products: Cream Card Stock, Dimensional Tape, Nida Tanweer Magic Glitter, Golden Tinsel Embossing Powder, Versamark Embossing Ink, Rhinestones, Paper Magik Decorative Beads, Lace, Hot Glue, Vellum, Pearls.

Instructions:

Cut out a 4" x 8 1/4" card base, then cut a slightly smaller rectangle from your paper collection and glue it to the base. Then cut out a 3 3/4" x 8" rectangle from the gold paper and glue it to the card. Cut out a 3 1/4" x 7 1/2" rectangle from white paper, then cut a slightly smaller rectangle from the collection paper and glue it to the card. From the Slim Eyelet Rectangle Die set, cut out a medium element from the gold paper and then cut out a matching rectangle from the Slim Basic Rectangle Die set from the paper from the collection. Stamp with gold embossing the sentiment from the Friendship Sentiments stamp set, heat it with a heater. Glue as shown with Double Dots 100pc. -3D Foam Circles.

Stamp the Peacock from the Ornate Peacock set on gold paper with white embossing powder. Heat with a heater. Cut with a matching die. Decorate the peacock's tail with colored Nuvo drops, wait for them to dry.

Glue as shown.

Other Products: Embossing Powder Seafoam White, Die Cutting Machine, Embossing Stamp Pad

Instructions:

Card size is 5 x 7”. Score and fold 10 x 7” white cardstock at 5” on the long side to create card base. Cut sheet 9B 2x from the Ornate Peacock Paper Collection measuring 4 3/4 x 6 3/4” and ink the edges using Cactus Flower ink. Cut Luxe Gold cardstock 2x measuring 4 7/8 x 6 7/8”. Adhere the designer paper to the Luxe Gold cardstock and adhere one set to the card front and one set to the inside of the card. Cut white cardstock measuring 4 x 6”, ink the edges and stamp the sentiment ‘Hope your day is as special as you are” from the Special Birthday Sentiments Cling stamp set using Archival Garden Patina ink. Adhere to the inside of the card. 

Cut a stack for the card front as follows: white cardstock 3 3/4 x 5 3/4”, Luxe Gold cardstock 3 5/8 x 5 5/8”, Sheet 9B from the paper collection 3 1/2 x 5 1/2” and another sheet of white cardstock 3 3/8 x 5 3/8”. Ink the edges of the designer paper, stamp ‘Happy Birthday’ from the Special Birthday Sentiments Cling Stamp set on the top right of the white cardstock using the Garden Patina ink, dry emboss the white and adhere the layers together in size order using dries clear adhesive. Adhere the stack to the center of the card front using dimensional tape. 

Stamp the beautiful peacock from the Ornate Peacock Cling Stamp set and the pretty flourish from the Peacock & Posies Cling Stamp on watercolor paper using Metallic Gold ink, cover with WOW Metallic Gold Sparkle Embossing Glitter and heat set using the Heat It Tool. Color using Zig Clean Color Real Brush Markers and the water brush. Lightly shape using the deluxe flower shaping kit and adhere the peacock to the card front using dimensional adhesive and adhere the flourish to the inside. 

Other Products: White Cardstock, Diecutting Machine, Paper Trimmer, Misti, WOW Metallic Gold Sparkle Embossing Glitter, Dimensional Tape, Dimensional Foam Adhesive Shapes, Embossing Folder