Instructions:

The ready top fold card measures, 7″ x 7″. For making the card base you will need two pieces of cardstock measuring 7″ x 7″ and 7 1/2″ x 7″. Score the second piece on 1/2″ and crease well using a bone folder, making a hinge. Add glue on the hinge and secure the first piece on top. 

Choose the paper from the Floral Frames Paper Collection and cut it measuring 6 1/2" by 6 1/2" card mat. Next, layer it on the card front using foam dots. Next cut a 6" by 6" card panel from the same Paper Collection and cut the inner square frame with a paper cutter. Mat it on white cardstock making a delicate border of 1/16" all around the border. Add dimensions using double-sided tape.

Cut 6 pieces using Filigree Companion Frame corners, each from Luxe gold cardstock and white cardstock. Adhere white die cuts on each of the golden die-cut to add strength. Cut circle frames, one each from gold and white cardstock using second and third outer dies from Circle Basic Die Set. Adhere them together keeping gold on the top. Cut a circle from the same paper collection using the second die of the Circle Basic die set. Stamp the sentiment from Just For You Sentiments Cling Stamp Set using Forget me not archival ink and adhere it to cover the window of the circle frame.

Prepare a doily by adhering golden corner die cuts around the window frame. Glue them from the back using strong tacky glue. Layer the prepared doily on the card front as shown.   

For Sunflowers, stamp multiple images of flower petals using Red Geranium Archival ink and cut these using its coordinating dies. Ink the flower petals using the same and shape them using a Deluxe flower shaping kit. Using the crushing technique, create calyx and complete the flower by securing them behind each flower for the complete flower look. Add seed beads using Glossy Accent to complete the flower.

Stamp 2 sets of leaves using Leafy Accent stamp and Olive Green Archival ink and cut them using its coordinating die. Color the leaves using the same inks and shape them using a deluxe flower shaping kit.

Stamp, color and cut a few wisteria flowers using Bright Tangelo Archival ink and shape them using a flower shaping kit. Add flower pollens using a glossy accent and use these flowers as fillers.

Once, all the elements are ready, assemble the card as shown and complete the card by adding the sentiment from Celebrate Love Sentiments Cling Stamp Set.

Other Products: Smooth White Cardstock, Die Cutting Machine, Bone Folder, Glossy Accent, Sharp Scissors, and Sequins.

Instructions:

My card size is 4 1/4" x 5 1/2". Make card base and cover with a piece of Sheet 5A of the Floral Frames paper collection. Emboss a piece of white cardstock with the embossing folder and glue to card front.

Using Light House ink stamp the Oval Floral Frame onto white cardstock and cut out using coordinating dies. Color the flowers and leaves with ink and Stack and Store Daubers. Glue to card front.

Using Memento Rich Cocoa ink stamp the flowers and leaves onto Deluxe flower shaping paper and cut out with coordinating dies. Color the flowers with Light House ink and the leaves with Leaf Green ink and edge the leaves with some Light House ink. Use the flower shaping tools to shape the flowers and leaves. I glued two flower petals together to form the flowers and then added Prills to the centers. Using the Hydra Sponge and Dries Clear Adhesive add glitter to the flowers and set aside to dry.

Stamp the sentiment using Light House ink and cut out with coordinating die. Arrange flowers and leaves and glue down to card front. Decide on placement for the sentiment and glue down. The card is finished.

Other Products: Die Cut Machine, Hot Glue Gun, White Cardstock, Fanciful Flowers Embossing Folder

Instructions:

Make a shaped card base using the Flourish Companion Frame die. Fold a White card stock from Deluxe Flower shaping paper set into half. Place the outermost die from the Die set on the paper so that the top horizontal edge of the die is outside the top fold. Cut through the die cutting machine to get a hinged fold card base.

Cut two pieces of white die cut from the outermost die of the same set and another piece in light green pattern paper from Climbing Clematis Paper Collection. Adhere the two pieces together and adhere on the card front.

Cut out two pieces white die cut from the Flourish Companion Frame die set to get the floral frame outline die cut. Adhere the two pieces together and adhere this frame on the card front.

Cut a piece of die cut from dark blue pattern paper using the middle plain die from Flourish Companion Frame die set. Cut a die cut from the middle decorative frame die using white card stock. Adhere the plain piece in the center and then adhere the decorative frame.

Cut two pieces of die cut from Luxe Silver card stock using the Decorative Pocket and accents die set, Trim to fit on the centre frame and adhere on the card so that they are placed opposite each other.

Stamp the Clematis flower using Plum Archival ink on Deluxe Flower Shaping paper. Color with a shade of Vibrant fuschia, Sun flower and leaf green ink using sponge daubers. Cut with matching die and shape in the 3D flower shaping mold. Use the Deluxe Flower Shaping kit to emboss the flowers further. Adhere two flowers together and add prills in the centre.

Stamp the small flowers from Autumn Wreath stamp set and the Rectangular Floral Frame stamp set on Deluxe flower Shaping Paper using Vibrant Fuschia ink. Color with same ink. Cut with matching die and shape the flowers in the Deluxe Flower shaping tool kit. Layer two flowers together and add small stamens from Bridal Bouquet set.

Stamp the Leaves from the Rectangular Floral frame die with Library Green ink on Deluxe Flower shaping paper. Cut with matching die. Shape the leaves.

Arrange all the flowers and leaves  using hot glue on the centre of the card.

Finish the card by adding a sentiment from Just For you sentiment stamp set.  

Other Products: Die cutting machine, hot glue gun

Instructions:

Create a card base from Simply Classic Oval Frame Die HCD2-7382, on white cardstock. From the same die set cut one intricate border die on white cardstock, add crystal clear glitter and adhere it on card base. From the same die set cut another layer on pattern paper from the collection Floral Frames Paper Collection HCDP1-2135 and adhere it using foam tape.

Now cut another intricate die on white cardstock and adhere it on the pattern paper using Designer Dries Clear Adhesive and adhere another layer using foam tape, stamp sentiment from For My Friend Sentiments Cling Stamp Set HCPC-3844 using archival ink-forget me not and emerald green.

Now Stamp Oval Floral Frame Cling Stamp Set HCPC-3975 on white cardstock using archival ink-forget met not and emerald green, cut it with coordinating die and with the same die set cut it on silver cardstock. Adhere both of them together using designer dries clear adhesive and adhere it on top, as pictured.

Now from the Curvy Floral Frame Cling Stamp Set HCPC-3976, stamp some flower and leaves using archival ink-vibrant fuchsia and library green, cut them with coordinating die and color them using carnation red and forget me not for flowers and leaf green for leaves. Add stamens, prills and crystal clear glitter.

Stamp some small flowers from Rectangular Floral Frame Cling Stamp Set HCPC-3974, using archival ink-vibrant fuchsia and cut them with coordinating die, color them using carnation red and add prills.

Assemble flowers and leaves together as shown.

Other Products: Big Shot Plus Machine, White Cardstock

Instructions:

The ready top fold slimline card measures, 8 1/2″ by 4 1/2″. To prepare the card base, cut a smooth white cardstock measuring 81/2″ by 9" and score at 4 1/2″ on 9 ” length. Crease well. Choose the pattern paper from the Floral Banner Paper Collection and chop it to 4″ X 8″ and layer the panel on the card front. 

For the top mat, choose the coordinating designer paper from the same paper collection and cut measuring 3 3/4" by 7 3/4". Mat it on a white cardstock making a delicate border of 1/16" on all sides. Layer the panel on the card front using double-sided tape.

Cut 4 white die cuts using HCD1-7263 Swirly Accent Spray Die and entangle one each with another die to create 2 fancy border accents. Glue them using tacky glue on the ready card front. Next cut a frame using the outer second and third die from the HCD1-7155 Circle Basics Large Die set and layer it on the solid circle piece from the same paper collection. Finally, layer the circular frame in the center using double-sided tape. 

For the wild roses, stamp the flower petals with Red Geranium Archival ink using a Small Wild Rose Stamp set and cut them using its coordinating dies. Ink the flowers using Rose Madder and shape them using a Deluxe flower shaping kit. Once the shaping is done, assemble a few flowers using ball tools from the shaping kit and add matching seed beads to the flower centers.

Stamp, color and cut a few Wisteria flowers using Cactus Flower Archival ink and shape them using a flower shaping kit. Add flower pollens using a glossy accent and use these flowers as fillers.

Stamp 2 sets of leaves using Leafy Accent stamp and Olive Green Archival ink and cut them using its coordinating die. Color the leaves using the same inks and shape them using a deluxe flower shaping kit.

Stamp the butterfly image from Small Floral Butterfly Accents Cling Stamp Set with Versafine on Rajni Chawla’s Vellum Flowerite and sprinkle white heat embossing powder. Dust extras and heat set the image using a heat tool. Cut the butterfly using its coordinating die. Color the butterfly using distress oxides.

Once all the elements are ready, assemble a flower bouquet as shown and finish the card using a sentiment from Celebrate Love Sentiments Cling Stamp Set.   

Other Products: Smooth White Cardstock, Double-sided tape, Distress Oxide: Peacock Feather, Die Cutting Machine, Scissors, Score Board, Glossy Accent, and Tacky Glue.

Instructions:

Ready side fold card measures 5.5" × 7.5". First choose a designer paper and cut a mat using the largest die from the Flourish Companion Frame Die set. Adhere it on the ready card base. Stamp sentiment using black archival as pictured. Further, cut a frame from designer paper and white cardstock using a shaped die from the set. Glue both frames together and adhere it on a card using foam dots.

Other Products: White Cardstock, Hot Glue

Instructions:

This tent fold card measures  7“ x 5“  when completed. Using the outer die from the Simply Classic Rectangle Fancy Frame die set and the white card stock, die cut two of these shapes. Die cut also one shape from the design paper from the collection paper pad sheet 10B . Adhere this to one of the white card stock shapes. Score  1“ across the top of the other white card stock shape, apply double sided tape and adhere to the 1“ scored part. When placed together with the other card base shape this will form the tent fold card base. Using a dauber and the Leaf Green ink, ink the edges of the card front.

Using the same die set make the gold frame using the 2nd  die in. Die cut a frame from the gold card stock. Do the same with the die that is 4th in from the outside. Adhere the 1st  die cut in to the card front using the clear drying adhesive. The other will be used later.

Again from the same die set take the 3rd die in and the design paper in the paper pad collection (sheet 10B) and the white card stock, die cut the shape. Adhere both together. Apply the leaf green ink to the edges of this frame the same as the card base. Adhere this to the card front with the 3D foam dots.

Taking the white card stock, the sepia ink and the Vining Clematis banner stamp, stamp the image. Stamp also the sentiment. Bring color to the banner flowers and leaves by using the water color brush and the aqua pencils. The colors used are: Pesto Green for the leaves and Claret, Carrot for the flowers. Bring a little shape to the flowers and leaves by using the flower shaping tools.

Adhere the banner to the card front with clear drying adhesive, using now the remaining small frame to align the banner so it has a high curve and the ends of the frame can be adhered to the banner ends. The banner will need to have a curve to fit. Do this by rolling the banner over your fingers to curl the card stock. Adhere this now to the card front at the banner ends and at the middle of the frame sides.

Make the Clematis flowers by stamping, coloring and die cutting six large petals, one for each flower. Bring shape to the petals by using the collections 3D shaping mold. Use the pricking tool from the flower shaping set and make a hole in the petal centre, big enough to be able to get three folded stamens through it. Adhere the stamens in place by using the hot glue gun. Apply glitter to the flower tips by using the hydra sponge to bring the adhesive to the petal tips then dip the petals into the glitter or sprinkle the glitter. When the adhesive is dry, tap the excess away, then you can trim away the excess stamen stems so they are ready for use. Adhere the flowers in a cluster with the hot glue gun, three flowers at each end of the banner.

For the birds, use the matching stamp and die sets Clematis Birdhouse. Stamp onto card stock two sets of birds using the sepia ink, three birds will be used. The color aqua pencils used for the birds are:  Aqua, mango and Apricot. Bring a little shape to the birds by using the flower shaping tools. Fussy cut the birds feet away and adhere to the card banner as shown using the hot glue gun.

Other Products: Ink: Spectrum Noir Aqua Pencils: Pesto Green, Carrot, Claret, Apricot, Aqua, Mango. Fussy cutting Scissors, Ruler, Misti Stamping Tool, Double Sided 3D Foam Tape, Double Sided Tape, Hot Glue Gun.

Instructions:

Cut a piece of 6" x 6" pattern paper from Floral Frames paper collection and adhere it on a same sized card base. Die cut a piece of white cardstock using the dies from Courtyard Elegance Die and adhere it on the cardbase. Stamp the Butterfly image from Large Floral Butterfly on a piece of pattern paper from the same paper collection with Manganese Blue Archival ink. Die cut this piece and a piece of white cardstock using the matching die from Large Floral Butterfly die. Die cut another piece of pattern paper from the same paper collection using the decorative butterfly die. Slightly curl the wings and adhere all the 3 pieces together so that the white piece is behind the pattern paper pieces. Adhere this butterfly on the card front at an angle.

Stamp the Small Wild Rose with Manganese Blue Archival ink and the Smallest Sweet Peony with Vibrant Fuschia Archival ink on a piece of Art Foam Paper. Ink the Wild rose with the same ink on both sides. Ink the Sweet Peony with both the inks to get a pretty purple color. Die cut them using the matching dies from Small Wild Rose die and Small Sweet Peony Die. Shape them using an iron and Deluxe Flower Shaping kit. Add Lettuce Entertain You Prills to the wild rose flower centers and medium pastel pearl stamens to the sweet peony flower centers.

Stamp the leaves from Large Wild Rose Cling Stamp set on a piece of Art foam paper with Olive Archival Ink several times. Color them with Leaf Green Archival ink and Library Green Archival ink. Die cut them using the matching die from Large Wild Rose Cling Stamp set. Shape it using an iron, Large 3D Wild Rose Shaping Mold and a piece of sponge.

Stamp the Leaves from Holly Berry Spray Cling Stamp Set on a piece of Deluxe Flower Shaping Paper with Olive Archival ink. Ink it lightly with Leaf Green Archival ink. Die cut these with the matching die from Holly Berry Spray Die. 

Arrange and adhere all the flowers and leaves as shown. Add a few Ladybugs made with Ebony Black and Red Berry Nuvo Drops to the flower arrangement. Add a few pearls and rhinestones to add finishing touch to the card.

Other Products: Red Berry Nuvo Drops, iron, Tim Holtz Stamp Platform, Tim Holtz Glass Media Mat, oval makeup brushes, sponge, pearls and rhinestones.

Instructions:

Stamp the smallest Sweet Peony with Vibrant Fuschia Archival ink on a piece of Art Foam Paper. Ink it with Manganese Blue and Vibrant Fuschia Archival inks to get a pretty purple color. Die cut them using the matching Small Sweet Peony Die. Shape them using an iron and Deluxe Flower Shaping kit. Add medium pastel pearl stamens to the sweet peony flower centers. 

Die cut the scalloped circle from white cardstock and the eyelet strip using the dies from Decorative Circles Frame die and Tickets and tags die. Leave the die in place and ink the eyelet strip piece using Seedless Preserve Distress ink on one side and gradually fading it towards the other side. Adhere the scalloped circle die cut on this piece as shown. Adhere the flowers on the circle die cut using hot glue gun.

Other Products: Seedless Preserve Distress ink, iron and hot glue gun.

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 10” x 7”, score at 5” along the long side and fold to create a base card of 5” x 7”. Cut a piece of silver cardstock 5” x 7” and adhere to the front of the card. Cut a piece of light blue pattern paper 4 7/8” x 6 7/8” and adhere to the front of the silver cardstock.

Die cut two decorative dies using the Nos. 2, 3 and 4 dies from the HCD2-7338 Lattice Flourish Gateway Die set – one out of white cardstock and one from Deluxe Flower Shaping Paper. Stack these dies together with the white die on the top and then adhere the outer decorative frame to the card front with foam strips.  Adhere the inner lattice gate in the centre of the frame.

Stamp the baby animal images from the HCPC-3916 Baby’s Friend Cling Stamp set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Real Brush Markers and die cut with the coordinating dies. Adhere the elephant, rabbit and raccoon to the base of the card as shown.

Stamp the rose images from the HCPC-3915 Welcome Baby Cling Stamp set with Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Real Brush Markers and die cut with the coordinating dies. Adhere around the animals and frame as shown

Stamp the sentiment images from the HCPC-3915 Welcome Baby Cling Stamp set with Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Real Brush Markers and die cut with the coordinating dies. Adhere to the centre of the frame.

Other Products: Iris cardstock

Instructions:

Fold white cardstock to 7.5 x 5.5" with fold on the top then use the outline die from the Filigree Companion Frame Die set to cut, leaving the top of the die over-hanging fold by about 3/4". Use the same die and cut out the full front from the white cardstock and the other from Cascading Petals Paper Collection. Cut out big white frame, a pink panel, smaller white frame and two white decors from the same die set. Stamp the sentiment in Cactus Flower ink using Just For You Sentiments stamp and cut it out. Use dimensional adhesive and glue all elements.

Stamp 3 big and 6 smaller blossoms from Sweet Magnolia Blooms Cling Stamp Set in Cactus Flower ink onto Deluxe Flower Shaping Paper, color their edges and centers with the same ink, diecut with coordinating die and shape with mold. Stamp blossoms from the Curvy Floral Frame Cling Stamp Set in Leaf Green ink onto Deluxe Flower Shaping paper. Color them with the same ink and shape with Deluxe Flower Shaping Tools. Add some Pastel Pearl Medium Stamens to centers of flowers. Stamp 2 branches from the Classic Rose Cling Stamp Set in Leaf Green ink, color them, cut out with coordinating die and shape with coordinating mold. Stamp 3 branches from the Cottage Tree 'scapes Cling Stamp Set in Leaf Green ink, color them with the same ink and diecut with coordinating die.

Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, sisal

Instructions:

Cut a white cardstock to 6.5 x 6 3/4". Score at 7/8" and 5 5/8" and fold to get a gate fold base. Cut out a pink front from the Cascading Petals Paper Collection with the outline die from the Classic Butterfly Companion Die and adhere it to both sides of the card front. Cut out a white and purple diecut from the Cascading Petals Paper Collection with the Classic Butterfly Companion Die and adhere them to both sides of the card front. Color the purple butterfly with Cactus Flower ink. Bend the wings of all butterflies a little.

Stamp 3 big and 6 smaller blossoms from Sweet Magnolia Blooms Cling Stamp Set in Cactus Flower ink onto Deluxe Flower Shaping Paper, color their edges and centers with the same ink, diecut with coordinating die and shape with mold. Stamp blossoms from the Curvy Floral Frame Cling Stamp Set in Leaf Green and Sunflower inks onto Deluxe Flower Shaping paper. Color them with the same ink and shape with Deluxe Flower Shaping Tools. Add some Pastel Pearl Medium Stamens to centers of flowers. Stamp 3 branches from the Classic Rose Cling Stamp Set in Leaf Green ink, color them, cut out with coordinating die and shape with coordinating mold. Stamp 3 branches from the Cottage Tree 'scapes Cling Stamp Set in Leaf Green ink, color them with the same ink and diecut with coordinating die. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, sisal

Instructions:

Prepare a Black 51/2 x 71/2” card base. Score at 2 3/4” on the front of the card base. Trim the Moments in Time paper (sheet 11B) into 3 parts slightly smaller and adhere to the card base. Cut 2 of the outer dies from the Classic Companion Border set in Black and adhere to the front and small inside panel. Cut a piece of black card stock 4 x 6” and adhere to the back inside panel. Cut another piece of black 4 x 6 and adhere to the front panel. Using more of the 11B paper, cover both the inside and outside black that was added.

Cut one more piece of black 3 3/4 x 5 3/8” and cover with a piece of the 10A paper with the clocks on it. Add foam dots to the back and adhere to the front of the card as shown.

Locate and cut out the sentiment tag for the paper, layer it on top of a piece of black 2 3/4 x 2 3/4”.

Cut 2 of the corner pieces from black using the Filigree Companion die and adhere one to the bottom of the inside and one to the bottom of the front.

Stamp the flowers from the Curvy Floral Frame set on some of the Moments in Time Paper with the black ink, cut out with the coordinating die, use the Flower Shaping tool to shape and put 2 together making one flower.

Stamp the leaves on white with the Bamboo Leaves ink with the Summer Wreath Accents die. Use the coordinating die to cut out. Use the Flower shaping tool to shape and arrange in the front of the card along with all the flowers.

To finish, add white pearls to the center of each flower and black pearls as shown. Add glitter to all the leaves and flowers.

Other Products: Paper Trimmer, Die cut machine, White and Black Pearls,

Instructions:

Card size is 7 x 5”. Score and fold 10 x 7” Deluxe Flower Shaping Paper at 5” to create tent fold card base. Cut Moments in Time Paper Collection, sheet 11B, to 6 7/8 x 4 7/8” ink the edges using Brilliance Pearlescent Purple ink and adhere to the card front. Cut sheet 5A 6 7/8 x 4 7/8”, ink the edges and adhere to the inside of the card. Cut tags from sheet 12A using the inside Tickets and Tag Die and cut white cardstock using the outside Ticket and Tags Die. Ink the edges of the tags and adhere together. Punch a hole in the tops of the tags using a crop-a-dile and add satin cord. Adhere the tags to the inside of the card. Cut a sentiment from sheet 4B of the Moments in Time Paper Collection, ink the edges and adhere over the tags.

Using the Classic Companion Border Die, cut from white cardstock. Sponge half of the diecut with dries clear adhesive and sprinkle with Rajni Chawla’s Crystal Clear glitter. When dry, adhere to the top of the card front.

Stamp the Classic Roses on Deluxe Flower Shaping Paper using Brilliance Pearlescent Orchid ink, diecut using the coordinating dies, Color using Pearlescent Purple and Pearlescent Orchid and shape using the Groove Golf Tool and the Deluxe Flower Shaping Kit. Use three of the largest flowers and three of the next size flowers to create the large rose. Use two of the third size and three of the fourth size flowers to create the medium roses Adhere the flowers together using hot glue.

Stamp the leaves from the Classic Rose, the Leafy Accent leaves and the leaves from the Large Floral Urn on Deluxe Flower Shaping Paper using Pearlescent Ivy ink and diecut using the coordinating dies. Color the Classic Rose leaves using the Pearlescent Ivy ink and color the leaves from the Large Floral Urn using Pearlescent Ivy and Pearlescent Purple. Shape the leaves using the Deluxe Flower Shaping Kit. Use a paint brush to add dries clear adhesive to the roses and leaves and sprinkle with Rajni Chawla’s Crystal Clear Glitter. Adhere the roses and leaves to the bottom of the card front.

Use a sponge to randomly add dries clear adhesive to the inside of the card and sprinkle with Crystal Ultrafine Transparent Glitter to add a little extra sparkle.

Other Products: Diecutting Machine, White cardstock, Brilliance Pearlescent Inks – Purple and Ivy, Misti, Hot Glue Gun, Crop-a-Dile, Satin Cord

Instructions:

Card measures - 6 1/4 inches by 6 1/4 inches. To create card base - cut out  a 12 1/2” x 6 1/4” piece of thick white card and score it at 6 1/4” (long side up). Fold using a bone folder along the score lines. Cut out one 6” x 6” piece of HCDP1-2134 Moments in Time Paper Collection and adhere it to the card front. Die cut circles of thick white card and HCDP1-2134 Moments in Time Paper Collection using HCD1-7271 Rounded Window Frame Die and HCD1-7283 Courtyard Elegance Die, stock and adhere them to the card front using 3D foam.

Die cut frame of HCGP1-488 Luxe Gold Cardstock using HCD2-7308 Majestic Swirl Frames Die, then cut out one side of the frame using scissors and adhere final piece to the card front using 3D foam. Die out the shape of HCDP1-2134 Moments in Time Paper Collection using HCD2-7308 Majestic Swirl Frames Die and adhere it to the card front as shown.

Die cut sentiment from HCGP1-488 Luxe Gold Card using HCD2-7338 Lattice Flourish Gateway Die and adhere it to the card front using Dries Clear Glue with Metal Tip.

Stamp the clematis images from HCPC-3954 Clematis Cling Stamp Set on HCDP1-2134 Moments in Time Paper Collection with Memento Dye Ink Pad - Lilac Posies, then colour them with Memento Dye Ink Pad - Rose Bud using HCDA1-449 Daubers. Stamp the leaves of HCPC-3954 Clematis Cling Stamp Set on HCPP1-468 Deluxe Flower Shaping Paper with Memento Dye Ink Pad - Olive Grove, then colour them with Memento Dye Ink Pads: Olive Grove and Bamboo Leaves using HCDA1-449 Dauber. Die cut flowers and leaves using matching HCD1-7355 Clematis Die, then shape them HCFB1-5006 3D Clematis Shaping Mold and HCST1-401 Deluxe Flower Shaping Kit and adhere them to the card front as shown.

As a final touch glitter the flower petals and decorate flower centres with pearls and gems.

Other Products: Die Cutting machine, Trimmer or Guillotine, Scoreboard, Bone folder, Thick White cardstock, White pearls, Self adhesive purple gems

Instructions:

Cut out the white base of the card and fold it to 5 1/2" x 5 1/2". From the paper collection, cut a 5 1/4” x 5 1/4" square and glue to the base. From white paper, cut a 4 3/4 "x 4 3/4" square and glue, then from the paper collection cut a 4 1/2 "x 4 1/2" square and adhere. From the white paper, cut the the smaller frame from the Royal Elegance Frames Die set and glue it as shown in the photo.

Stamp the Vining Clematis Banner set and the sentiment on white paper with VersaColor ink and emboss with golden powder. Die cut with the coordinating die. Color with watercolor marker.

Glue everything as shown with Double Dots -3D.

Other Products: Big-Shot Machine

Instructions:

Create a 6 x 6" card base with white cardstock. Cut a 5.5 x 5.5" piece of designer paper from the Floral Frames Paper Collection, distress with Fern Green and adhere to card front. Cut the Elegant Hearts Centerpiece Die in white cardstock and adhere to card front.

Stamp the Oval Floral Frame Cling Stamp Set in Jet Black on Bristol Smooth Cardstock, cut out with coordinating dies, and color with Zig markers. Cut out again in Luxe Gold Card stock and adhere them offset, to create a gold shadow, add glitter to flowers and adhere to card front.

Stamp the sentiment from the Oval Floral Frames Cling Stamp Set in Jet Black and cut out with coordinating die, cut out an additional die in Luxe Gold cardstock, adhere together offset to create a shadow. Cut out the tag from the paper collection with the Album Tags and Accents Die and adhere sentiment, cut out additional tag in Luxe Gold and adhere offset. Adhere to right side of oval frame as shown and adhere metallic brad stickers to cover holes in tag.

Stamp the flowers from the Curvy Floral Frame Cling Stamp Set in Coastal Coral, cut out with coordinating dies and sponge with Coastal Coral and Bright Tangelo, sponge the leaves with Fern Green, sculpt with the 3D Floral Basics Shaping Mold and add stamens and glitter.

Arrange and adhere flowers and leaves as shown in photo.

Other Products: white card stock

Instructions:

Cut 5.5” square piece of red paper and adhere to the card base.

Select one of the 6” square panels, trim to 5.25” square and diecut the centre scene using the corresponding Cut Mat Create die. Adhere the blue frame to the centre of the card base.

Die cut 4 corners from the swirly accent spray and adhere to the card base. Layer the scene onto a 4.25” square of red paper and onto a slightly larger piece of white card, add to the centre using foam pads. Brush dries clear glue on to the roof tops, sprinkle with glitter and remove excess.

Stamp the snowman onto white stamping card using the black ink and colour using the zig watercolour makers. Die cut this and 2 additional die cut shapes, adhere these to make a sturdy snowman. Add dries white adhesive to the bottom and sprinkle with crystal clear gitter. Add to the card using foam pads.

Stamp the parcels using black ink and colour using the olive green and yellow markers. Stamp the berries using rich cocoa ink, colour using the makers. Die cut the parcels and berries and adhere to the card as shown.

Die cut the tags. Stamp the sentiment onto the circle tag and clear heat emboss. Adhere white tags to the reverse of each and tie with some linen thread.

Other Products: 6" square white card base, linen thread, foam pads, stamping card

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 10” x 7”, score at 5” along the long side and fold to create a base card of 5” x 7”. Cut a piece of silver cardstock 5” x 7” and adhere to the front of the card. Cut a piece of green pattern paper 4 7/8” x 6 7/8” and adhere to the front of the silver cardstock.

Die cut a frame using the No. 1 die from the HCD2-7191 Intricate Swirls Frames Die set out of white cardstock. Add Frosting Powder to the decorative edges with Dries Clear glue on a dry sponge. Adhere to the front of the card. Cut a piece of silver cardstock 4 1/8” x 6 1/8” and adhere to the front of the card. Cut a piece of light green pattern paper with the flowers on the bottom left side 4” x 6” and adhere to the front of the card.

Stamp the frame image from the HCPC-3974 Rectangular Floral Frame Cling Stamp Set in Library Green ink on Iris cardstock. Colour with Clean Colour Real Brush Markers and die cut with the coordinating die. Die cut another plain frame from Deluxe Flower Shaping Paper and adhere the coloured image to the plain image and then adhere to the front of the card.

Stamp the flower images from the HCPC-3974 Rectangular Floral Frame Cling Stamp Set in Rose Madder ink on Deluxe Flower Shaping Paper. Colour the centres with Sunflower ink and the petals with Tea Rose and Rose Madder inks and die cut with the coordinating dies. Colour the backs of the petals with Tea Rose ink and shape using the groove golf tools. Add yellow pollen to the centre stamens and assemble from the largest to smallest petals. Add Crystal Clear glitter using clear gloss gel medium and add Go Man Go Prills to the centres of the flowers. Adhere the flowers to the bottom left of the card over the frame and the top of the card as shown.

Stamp the leaf images from the HCPC-3974 Rectangular Floral Frame Cling Stamp Set in Library Green ink on Deluxe Flower Shaping Paper. Colour with Leaf Green and Library Green inks and die cut with the coordinating die. Colour the leaves on the back with Leaf Green ink and shape using the groove golf tool. Add Crystal Clear glitter using clear gloss gel medium and adhere around the flowers as shown.

Stamp the sentiment image from the HCPC-3976 Curvy Floral Frame Cling Stamp Set in Library Green ink on white cardstock and die cut with the coordinating die. Die cut three plain dies out of white cardstock and stack together. Adhere the sentiment to the top and adhere to the middle of the frame as shown.

Other Products: Iris cardstock, clear gloss gel medium, yellow pollen

Instructions:

Card size: 4 3/4" X 6 5/8”. Start with 1 piece of white cardstock that is 5 1/2” x 6 5/8”, score at 3/8” on both long sides for tabs to glue to 2 pieces of white cardstock that are 1 1/2" x 6 5/8”. Glue the 1 1/2" pieces to the tabs, card base is done.

You need two 1/2" by 6 5/8” plus one 4 3/8” X 6 3/8” pieces of white cardstock to spray Oxide inks on, whichever your preferred colors are (a mixed media type cardstock works best). When completely dry glue the 1/2" pieces to the 2 sides and glue the larger piece inside of card.

Use gold cardstock to cut the front (gatefold) die cuts using the new Classic Companion Border Die (cuts both sides at once). Also cut 2 decorative butterflies, one 2 1/2" circle and one 7/8” X 5” piece out of gold. From white cardstock cut 2 butterfly decorative die cuts, one 2 3/8” circle and 1 banner shortened to 4 3/8” long.

Use Majestic Violet to stamp both sentiments, 1 on the banner and 1 on the white circle. Glue banner onto the 5” gold strip then trim ends of gold to match banner. Glue white circle to gold circle then glue the circles to the center of inside.

Stamp VersaMark on white 2 times and on gold 2 times. Use gold embossing powder for the gold stamped butterflies and use white embossing powder for the 2 white. Heat emboss then die cut all 4 butterfly bases. Glue white filigree butterflies to gold stamped bases and gold filigree die cuts to white stamped bases. Glue the 2 gold base butterflies inside with circle sentiment.

Glue the 2 gatefold gold die cut pieces to the 1/2” front sides of card base. The 2 gold fronts should meet in the middle just perfectly. Use foam tape or other dimensional adhesive to adhere left half of banner sentiment to left side of card at a slight angle. Adhere both white base butterflies using foam tape under their bodies on the top left side and bottom right side of card front.

Other Products: White cardstock, VersaMark Ink Pad, Distress Oxide Spray Inks: yellow, pink, purple, blue

Instructions:

The card base is white cardstock that is 6 x12" and folded in half. Cut the 6 x 6" card front from the Rustic Sunflower patterned paper. Using the large and small circle dies, cut the scalloped circle from white cardstock, then the next smaller plain circle from blue patterned paper. Adhere these layers together and adhere to the card base. Using the Rounded Window Frames Die, cut the smaller decorative piece from white cardstock, and a plain circle from light green patterned paper. Adhere these 2 layers together and adhere to the card from using foam tape.

Find and cut out the small journal strip and add the sentiment to the block using black ink. Adhere to the bottom of the card using foam squares. Add gems to either end to add a little extra sparkle.

Stamp and die cut 2 sets of the smaller rustic sunflower using brown ink (Staz On- Timber Brown) onto Deluxe Flower Shaping Paper. Stamp and die cut 1 set of the larger sunflower using brown ink onto Deluxe Flower Shaping Paper. Add color to the flowers using 2 tones of yellow ink (Stampin Up- Delightful Dijon, Crushed Curry) using daubers and the darker yellow at the tips of the petals. Shape the flowers using the coordinating 3D shaping mold. Assemble the flowers, and add Prills to the middle of the flowers using liquid adhesive. Let dry. Add the large flower to the middle of the card and the smaller flowers to either side.

Stamp and die cut 2 of each: the wheat, larger fern like leaves, smaller leaves from the Autumn Wreath and Summer Wreath Stamp sets using brown ink onto white cardstock. Add color to the leaves using green ink (Stampin Up- Old Olive) and daubers. Add a dusting of the same brown ink to the wheat. Add the leaves and wheat around the flowers.

Other Products: Stampin Up Ink (Crushed Curry, Delightful Dijon, Old Olive), Gems, Cardstock- White, Archival Ink- Jet Black, Scrapbook Adhesives by 3L (Crafty Foam Tape, 3D Foam Squares, Adhesive Dots Medium, Dual Tip Glue Pen, E-Z Runner Ultra)

Instructions:

The finished card measure 4 1/2 x 6 3/4". Take a 9 x 6 3/4" white cardstock for the base and fold it at 2 3/8" and 7" to make a center fold card. Cut a green paper (#12B from Floral Shoppe Collection) of the same dimension and glue it inside the card. Glue 2 pieces of green paper 2 3/8 x 6 3/4 on both side of the front.

Cut the Classic Butterfly Companion Frame die in a white paper and one in kraft. Glue the kraft diecut on the front of the card. Color the white die with tea dye and Bundle sage distress ink.  Cut it and glue it on the kraft diecut. 

Stamp your Climbing Clematis flowers with Tea Dye and Bundle sage ink onto white flower shaping paper, color the center and shade the edge. Diecut with the coordinating die. Place facedown into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe flower shaping kit tools. Glue 2 layers together. In the center of the flowers make a hole and add stamens. Made 1 big flower, 1 medium  and 2 small flowers. 

Cut in the Seasonnal Wreath Collection paper #6A a sentiment. In the edge in tea dye ink and glue it with 3D foam on the top of the card. Make a flower arrangement on the bottom of your card.

Add glue and Lion’s mane glitter on the butterfly in the middle of the card.

Other Products: Diecutting machine, water mister, scissors, hot glue gun, bundle sage distress ink, tea dye distress ink,

Instructions:

The finished card measure 5 x 7". Take a 10 x 7" white cardstock for the base and fold it in half, diecut using the Flourish Companion Dievto make a side fold shaped card. With the same die, cut a green paper #5A (Floral Shoppe Collection). Ink the edge in Bundle sage ink and glue it on the card base. Using Flourish Companion Frame die cut the two intricate dies in kraft paper and glue it on the top of your card.

Stamp your Climbing Clematis flowers with Tea Dye and Bundle sage ink onto white flower shaping paper, color the center and shade the edge. Diecut with the coordinating die. Place facedown into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe flower shaping kit tools. Glue 2 layers together. In the center of the flowers make a hole and add stamens. Made 2 big flowers, 1 medium  and 2 small flowers. Also make leaves. 

Using the Letters and Numbers Die, cut letters from Kraft cardstock to make a sentiment. Add 4 layers together plus the last one in kraft paper to make chipboard like letters and glue in the center of the card. 

Make an arrangement on the left of your card with ribbon and sewing thread and glue your flowers over it.

Other Products: Diecutting machine, water mister, scissors, hot glue gun, ribbon, bundle sage distress ink, tea dye distress ink, sewing thread

Instructions:

Create 5 x 7” card base using white paper and largest Fancy Classic Oval Frame Die. To create top base, cut Floral Frames Paper Collection using same die and place on the base of card. Die cut an outer frame from gold paper and Floral Frames Paper Collection using the decorative die from the same set and adhere to the card base using 3D foam tape for dimension.

To create daffodils, Stamp the Spring Daffodil Cling Stamp Set on paper with Ranger Archival Ink Pad – Sunflower and cut using the coordinating dies. You will need 2 petals of each to create flowers. For bigger flower use the biggest stamp, for smaller flower use smaller size stamp. Colour the flowers with Ranger Archival Ink Pad – Sunflower and Ranger Archival Ink Pad - Pink Peony using a sponge dauber. After colouring, place the flowers into the mold and run through cutting/embossing machine. Pierce the centre and glue in some stamens using hot glue gun. Add a little hot glue to the underside of the flower. Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Stamp the Leafy Accents Cling Stamp Set on the white paper with Ranger Archival Ink Pad - Leaf Green, cut out with the coordinating die, shade using this same ink and shape. Shape leaves using mold.

Stamp sentiment using Special Birthday Sentiments Cling Stamp Set on the piece of paper collection with Ranger Archival Ink Pad - Jet Black and place onto the card using adhesive foam strips. Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine

Instructions:

Centre Circle Basics Large die over top hung DL (8 1/4 x 4”) crease overhanging to cut away a portion of the circle. Cut Rustic Sunflower Paper Collection sheet 4B to fit the front of the card and 7B to fit inside the card. Lay each piece to the card blank and mark the aperture with a pencil then die-cut Circle Basics Large to mirror the aperture. Repeat for the inside of the card and edge both in Forget Me Not prior to adhering.

Die-cut one white and one Rustic Sunflower sheet 7B Simply Elegant Sunflower Centerpiece outer and inner die to create a wreath shape, adhere together and edge in Forget Me Not. Adhere white decorative over, adhere to the front of the card ensuring the aperture is not obscured by the card blank.

Stamp in Olive onto Deluxe Flower Shaping paper Rustic Sunflower and Leafy Accents leaves, colour with Veridian front and back and Olive to the centres. Die-cut and spritz lightly before running through the die-cutting machine in the 3D Rustic Sunflower and 3D Leafy Accents Molds.

Stamp in versafine sepia and clear heat emboss Rustic Sunflower Can and Freezer and Rustic Sunflower Bucket. Colour with Zig Clean Color Real Brush Markers and water pen. Die-cut additional sunflowers for the bucket and adhere on dots. Shape the bucket and petals/leaves facing forward and some backward using Deluxe Flower Shaping Kit. Add gems to the flower centres and secure to the front of the card on dots.

Stamp in Sunflower onto Deluxe Flower Shaping Paper Rustic Sunflowers, colour with Buttercup and die-cut. Colour the back in Buttercup prior to spritz and 3D Rustic Sunflower Mold. Hot glue 2 petals of the same size, add hot glue to the centres and add Redland Elements.

Loop some white thin ribbon adhere with hot glue to the card underneath flowers and leaves.

Add Dries Clear and Crystal Clear to petals and leaves.

Other Products: Paper trimmer, scissors, versafine sepia, clear embossing powder, gems, ribbon, hot glue

Instructions:

Cover the front of a DL card blank (8 1/4 x 4”), cut Rustic Sunflowers Paper Collection 9A and 10B edged in Forget Me Not to create a different look top and bottom of the card (the join will be covered with the ribbon).

Cover the inside of the card with Rustic Sunflower 7B edged in Forget Me Not and die-cut Album Tags and Accents in Rustic Sunflower 8B edged in Sunflower and white cardstock edged in Forget Me Not. Stamp Just for You Sentiments ‘Just for You’ in Forget Me Not.

Cut 2 pieces of grosgrain 1” wide ribbon long enough to wrap around the width of the paper panel created. Use a stamen wire and pinch the ribbons together offsetting them and secure at the pinch with the wire. Secure the ribbon ends around the back of the paper panel and then secure panel to the front of the card.

Create a double bow with same ribbon (to prevent the ribbon ends from fraying run a flame quickly along the exposed edges a match is preferable). Hot glue the bow onto the pinched section.

Stamp Small Floral Butterfly in versamark onto white cardstock and white heat emboss. Colour with Zig Clean Color Real Brush Markers and die-cut, rub wink of stella clear over the butterfly for sparkle or add glitter.

Stamp onto white cardstock in versafine onyx Floral Butterfly Accents, colour with Zig Clean Color Real Brush Markers and die-cut. Shape with Deluxe Flower Shaping Kit.

Stamp onto Deluxe Flower Shaping Paper in Leaf Green Floral Butterfly Accents, colour with Veridian and Olive then die-cut, shape with ball tool from the kit.

Stamp onto Deluxe Flower Shaping Paper in Olive Rustic Sunflower leaves, colour with Veridian and Olive. Stamp the sunflowers onto Deluxe Flower Shaping Paper in Sunflower colour with Buttercup and die-cut. Place die-cuts into the 3D Rustic Sunflower Mold, spritz with water and run through the die-cutting machine. Adhere 2 petals of the same size with hot glue to create the sunflowers. Hot glue Redland Elements to the centres of the flowers. Add Dries Clear and Crystal Clear to the sunflowers and leaves.

Die-cut letters for sentiment multiple times using Letters and Numbers Die in white cardstock and adhere together, adhere to the card and add sparkle with wink of stella.

Hot glue the die-cuts tucking into and behind the ribbon and add gems.

Other Products: Paper Trimmer, scissors, ribbon, versamark, matches, hot glue, wink of stella clear, versafine onyx, gems

Instructions:

It's a ready card base measuring 9 inches by 6 inches, trim a panel from Floral Shoppe Paper Collection measuring 8 7/8 by 5 5/8 inches, rough the edges using distresser tool and add on the card base using dimensional tape. Trim another panel from Deluxe card measuring 8 3/8 by 5 1/4 inches, rough the edges and add on the card base using clear glue. Trim another panel from paper collection sheet number 5A measure 8 1/8 by 5 inches, rough the edges and adhere on the last panel using clear glue.

Die cut 2 frames from Eyelet rectangle and Basics Die Sets on deluxe card and 2 frames on paper collection. Adhere white die cut underneath the designer paper frame using clear glue for the sturdiness and add these frame on the card base as shown using foam strips.

Stamp the sentiment "The Time We Share Together" on the brown card using versamark embossing ink cover with golden embossing powder and heat it using heat tool, die cut the dial using circle die from Circles Basics Large Die Set and set a side.

Stamp flowers on cream and light blue cardstock with versamark embossing Ink, cover with white embossing powder and heat it using heat tool, die cut the images using coordinating dies, shape the flowers using golf groove tool and make few a flowers. Using Deluxe Kit and hot Glue Gun add stamens in the centers, apply clear glue onto the flowers with hydra sponge and cover with Nida Tanweer Magic Glitter Powder.

Stamp the  leaves from magnolia collection and floral shoppe collection using Leaf Green ink on Deluxe Card, color the leaves with vivid chartreuse ink and leaf green, shape and apply clear glue and cover with Magic Glitter.

Stamp the Cardinals with Coffee Ink and color with dauber using same ink with light hands. 

Add all ready elements, lace and flowers as shown, embellish the card with Nuvo Drops and Crystal Lacquer.

Other Products: Die Cut Machine, Cream Cardstock, Light Blue Cardstock, Brown Cardstock, Nida Tanweer Magic Glitter Powder, Distresser Tool, Versamark Embossing Ink, Yellow Twine, Nuvo Drops, Dimensional Tape, Hot Glue, Lace, Golden Embossing Powder.

Instructions:

Make a beautiful butterfly bookmark. On an A4 cardstock with Linen Texture (220g), cut a decorative frame from the HCD2-7401 Classic Butterfly Companion Die. Divide into 2 parts.

From the 3B Floral Frames Paper Collection, cut a 1.75 '' x 6.75 '' rectangle. Fold in half and glue together. Glue the right element of the decorative frame on top. Leave the butterfly wing not stuck together, tilt it slightly upwards. Attach the second element of the decorative frame on the underside, twisting the butterfly wing outwards as shown.

Add silver Nuvo droplets to the butterfly as shown. And it's ready!

Other Products: Cutting machine, trimmer paper, cardstock A4 with Linen Texture (220g)