Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, sisal, promarkers, self-adhesive pearls

Instructions: Cut a piece of white cardstock 8 1/4 x 11", score at 5.5" and fold to get a base. Cut a piece of pink patterned paper from Sweet Magnolia Paper Collection to 5 1/4 x 8", adhere to the base. Cut a piece of yellow paper from Sweet Magnolia Paper Collection to 4 1/2 x 7 1/8" and a little bigger piece of white cardstock. Cut out the pink frame with a first die from Royale Gateway Die set, cut out a white frame with the second die. Stamp the sentiment with Celebrate Love Sentiments Cling Stamp in Vibrant Fuchsia ink and cut it out. Stamp a vase with Tulip Vase & Fillers Cling Stamp Set in Vibrant Fuchsia ink and cut it out with coordinating die. Color it a little bit with Vibrant Fuchsia ink. Adhere all elements as pictured.

Stamp 9 hyacinth flowers in Vibrant Fuchsia ink, color them with Vibrant Fuchsia and Rose Bud inks and diecut with coordinating die. Stamp 7 hyacinth flowers in Forget-Me-Not ink, color them with Forget-Me-Not and Summer Sky inks and diecut with coordinating die. Stamp 3 daffodil flowers in Forget-Me-Not ink on the Deluxe Flower Shaping Paper, color them with Summer Sky, Rose Bud and Forget-Me-Not inks and diecut with coordinating die. Shape the flowers using their coordinating shaping molds, then bend their petals with Groove Golf Tool, for all flowers add pink bead stamens.

Stamp 4 branches in Leaf Green ink using Leafy Accents Cling Stamp Set, color them, cut out with coordinating die and shape with the mold. Stamp 3 branches from Floral Shoppe Accents Cling Stamp Set using Lulu Lavender ink. Color them with promarkers and cut out with matching die. Cut into smaller pieces. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers and the vase.

Other Products: White cardstock, pearls, sheer aqua ribbon, foam sheet, Copics: RV04, RV02, RV10, BG01, BG13, BG32, YG11, YG03, YG17, London Fog Memento Ink.

Instructions: Card size: 5 x 7”. Cut a piece of white cardstock 7 1/2 x 10”, fold to make 5 x 7 1/2"card base. Lay the outer edge of the Teardrop Lattice Gateway die so that it hangs over the edge of the fold by about 1/8”, cut then cut 1 full outer die cut to glue onto the front of card. Cut another piece out of decorative paper-Aqua color. Make a thin silver frame for the card edge by using the outer die of 2 sets (they are just a tiny bit different in size), the Teardrop Lattice and the Scalloped Flourish Gateway die sets. Cut the outer die first then set the smaller die onto top and cut again to form the frame. Glue it to the edge (optional, make another for the inside of card).

Die cut the Regal Lattice Gateway from Luxe Silver and from white with the inset but not the cutout frame for the inset. Glue these together, offsetting slightly. Add foam around the arched section to pop up off the card front but before adhering to the card front, add a piece of decorative paper a lighter aqua in color to show through the lattice inset. Now glue this “sandwich” to the card front, centering. Add pearls to the flourish ends as desired.

Stamp using black, die cut and color 2 flower stems and fern. Stamp Cherry Blossoms using Magenta Hue and London Fog or other gray, sponge pink flowers, die cut and form in mold. For the pink flowers, glue 2 blossoms together and insert a green stamen. For white flowers just add some pink Prills to single layers. Make a bouquet from the fern, flower stems and 3D flowers then pop up and glue to lattice area.

Stamp some of the small butterflies from the Small Floral Butterfly set, die cut and color. Add one of the bigger butterflies (Body only) to the upper part of Regal Lattice die cut then add a “trail” behind the butterfly with Swirl Pearls. The other bottom butterfly I made into a side view butterfly, glue only the body on leaving the wing/wings free.

Stamp the sentiment and cut fish tail ends then curve. Glue it to the upper part of the lattice above the bouquet.

Glitter the bouquet and the butterflies. Make a multi-loop bow from sheer ribbon and glue it to the bouquet ends.

Other Products: Die cut machine; Hot glue gun; Paper trimmer;

Instructions: Begin by scoring the front and back panels of the Gateway Fold card at 2 1/2 “, fold, this will make the Gateway opening on the Gateway fold card.

Using the largest die in the Teardrop Lattice set, cut 3 panels from sheets 1B; 2B and 10B. Adhere the 10B in the center. Cut both the other panels into half, place 1B halves on the outside fronts, and the 2B halves on the inside fronts.

Using White card stock, die cut one of the Elegant Swirls out, cut in half, add to the outside fronts. Cut another one out and adhere to the center panel. Stamp the sentiment on the upper center with the Paradise Teal Ink.

Using the 3rd die from the Teardrop Lattice set, cut one white and one from 10A 6 x 6” panel, adhere to the 2 centers you just cut out together, add glue to one side and adhere to the left side of the fronts as shown. Add magnets.

Stamp all the leaves on white card stock with the Cottage Ivy ink, color with the Bamboo Leaves, cut out with the coordinating die, ink the edges with more of the Bamboo Leaves ink, place the Accent Leaves in the matching mold and run through the die cut machine to shape. Use the flower shaping tool to shape the other leaves. Add to the center panel and left side panel of the front.

Stamp the flowers with the Paradise Teal ink, color with the same ink very lightly, cut out with the coordinating die, ink the edges with more of the ink. Place in the matching mold and run through the machine to shape. Use the golf tool and put a hole in the center of each flower, put 3 together to make 1 flower, add stamens to the center and secure with hot glue. Add 3 small ones to the inside and the rest to the outside.

To finish, add glitter to all the leaves and flowers.

Other Products: White Cardstock, White Pigment Ink, Dimensional Adhesive, Funnel Tray, Scissors, Paper Trimmer, Die Cutting Machine, hot glue, distressing tool

Instructions: Card size is 5 1/2 x 5 1/2”. Cut white cardstock to 5 1/2 x 11”, score at 5 1/2”. Use the HCD2-7350 Royale Gateway outline die on card front. Place cutting plate only along the top edge of the gate die and diecut. Use the paper trimmer to trim along the top and bottom of card front. Use aqua paper from Floral Butterfly paper collection (sheet 2B). Diecut the edge using the outline of Royale Gate to match the card base. Trim the top and bottom down just slightly smaller than card base, then use the tearing technique along the left side by the fold. Use Stack and Store dauber to add light color around edges using Paradise Teal ink. Diecut Royale Gateway die onto white cardstock, color lightly with Magenta Hue ink. Apply Dries Clear glue onto hydra sponge, dab randomly onto card base and sprinkle with Rajni Chawla’s Frosting Powder. Heat set with embossing too. Use scissors to cut apart gate as needed and adhere the top of gate onto aqua card panel, and the bottom along white card base. Adhere aqua panel on card base.

Cut white cardstock to 3 1/2 x 5 1/4”. Cut green paper from paper collection (sheet 9A), to 3 5/16 x 5 1/4”. Use the smallest oval from Ornate Ovals Die HCD1-7305, to diecut an opening in green panel. Stamp sentiment using Paradise Teal, followed by Magenta Hue ink onto white cardstock using the opening of green panel as a guide. This will create a beautiful purple hue sentiment. Adhere these panels onto card base using foam adhesive. Use both of the smallest dies from Ornate Ovals die to create an oval frame. Repeat this to create 3 more, layering together to create a thicker frame. Lightly shade the oval frame using Magenta Hue ink, then apply Dries Clear glue onto hydra sponge and dab randomly onto oval frame. Sprinkle with Frosting Powder and tap off. Heat set using embossing tool, then adhere on green panel as shown.

Stamp the butterflies onto vellum using white pigment ink and heat set using Bridal embossing tinsel. Stamp the 3 smallest butterflies from Small Floral Butterfly stamp set doing multiplies of two butterflies for added layers. From HCPC 39-52 Floral Butterfly Accents Stamp set, stamp the fern leaf and floral sprig using Leaf Green ink on the foliage and Vibrant Fuchsia on the flowers. Diecut with coordinating dies.

Use Stack and Store daubers along with the following inks to color the backside of the vellum images. Use Magenta Hue and Bright Tangelo on the smallest butterflies, Manganese, Bright Tangelo and Vivid Chartreuse on the next smallest butterfly. Then finally Vibrant Fuchsia and Bright Tangelo on the 3rd smallest butterflies. Use scissors to trim away to outer edge of orange butterfly, then layer onto matching butterfly using hot glue. For the blue butterfly, fold this in half and adhere using hot glue. Layer the pink butterflies together using hot glue. Use the stylus handle to lightly shape the wings of the butterflies.

Color the foliage with Vivid Chartreuse and Leaf Green ink, shape using the Deluxe Flower Shaping kit. Trim the fern leaf in half and adhere onto edge of panel, Apply Crystal Lacquer on fern leaf for a glossy effect. Trim flower sprig as needed and adhere on card base as shown. Adhere butterflies as desired.

Cut purple paper from paper collection to 5 3/8” square, distress edges using distressing tool and adhere onto inside of card, followed by vellum slightly smaller for a frosted appearance.

Other Products: H Smooth White Cardstock, Satin cord, Watercolor paper, Dimensional Tape, Hot glue

Instructions: Ready side fold card measures 5.5” × 7.5”. First, cut a piece of designer paper measuring 5.25" × 7.25", adhere it on ready card base. Further, choose another paper and cut a mat measuring 5” × 7” adhere it on white cardstock which is 1/8 of an inch bigger on all four sides. Cut all the Elegant Swirl and Lattice Flourish Gateway diecuts from white cardstock . Glue them using dimensional tape as pictured.

Stamp Floral Accents images on watercolor paper black archival and cut with coordinating dies. Paint images using zig markers. Arrange images on card in desired manner and glue them using hot glue. Cut an eyelet strip using Tickets and Tags die and stamp sentiment on it. Trim die cut and glue it on card as pictured.

For finished look apply glitter on Floral accents and butterfly using Art Glitter Clear Dries adhesive.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, sisal, Promarkers

Instructions: Cut a piece of white cardstock 8 x 8 1/4", score at 4" and fold to get a slim base. Cut a piece of patterned paper from Sweet Magnolia Paper Collection to 3 7/8 x 8 1/8". Cut a piece of patterned paper from Sweet Magnolia Paper Collection to 2 x 7 5/8" and a little bigger white cardstock. Use the first and second size down dies of the Ornate Ovals Die and cut out a white frame, use the biggest die and cut out a green frame. Stamp the sentiment with Celebrate Love Sentiments Cling Stamp in Vibrant Fuchsia ink and cut it out. Adhere all elements together.

Stamp 6 blossoms from Sweet Magnolia Blooms Cling Stamp Set in Majestic Violet ink and 4 leaves in Leaf Green ink onto Deluxe Flower Shaping Paper, color them with the same inks, diecut with coordinating die and shape with mold. Stamp 4 branches from Sweet Magnolia Buds Cling Stamp Set in Tuxedo Black ink onto Deluxe Flower Shaping Paper, color with promarkers, diecut with coordinating die and cut into smaller pieces. Stamp 4 branches from Cottage Tree 'scapes Cling Stamp Set in Leaf Green ink and cut them out with coordinating die. Add some Pastel Pearl Stamens to all flowers. Use dimensional adhesive and hot glue to attach sisal, flowers, sentiment and leaves onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers.

Other Products: Altenew watercolors, Brustro watercolor cardstock, Brustro green gold brushes, double sided red tape, white thread and pearls

Instructions: To see a video tutorial on this card click here. Cut a 4" x 5 1/4" piece of pattern paper from Floral Butterfly Paper Collection and adhere it with a washi tape or any repositionable tape on a 4 1/4" x 5 1/2" white card base. Cut a hole in the card front using the die from Circle Basics Large Dies. Die cut 2 lacy butterflies from white cardstock using the die from Large Floral Butterfly Die. Place one of the die cuts on the card front and tape the circle die used earlier so that it aligns with the cut on the card front. Die cut the circle from the butterfly die and adhere the winds and antenna on the pattern paper as shown. Adhere the second butterfly die cut inside the card so that it aligns with the butterfly on the card front.

Stamp the butterfly from Small Floral Butterfly Cling Stamp Set on a piece of watercolor cardstock and die cut it using the matching die from Small Floral Butterfly Die. Die cut 1 more piece of butterfly from white cardstock using the same die. Color in the image using Altenew watercolors. Apply 3-D Crystal Lacquer, Gloss White and Ebony Black Nuvo Crystal Drops to parts of butterfly and let it dry. Adhere the 2 butterfly die cuts together sandwiching the white thread vertically in the center. Adhere the ends of the thread on the card front as shown using strong double sided tape. Adhere the pattern paper on top.

Die cut a piece of Luxe Silver Cardstock using the Eyelet Circle and Basics Small Dies and Circle Basics Large Dies to create a frame. Adhere this on the card front. Embellish the die cut large butterfly with pearls to add finishing touch.

Other Products: White Cardstock, Distress Inks

Instructions: Create a card base with the Elegant Swirl Gateway Die, cut out a cover piece in fuchsia cardstock from the Sweet Magnolia Paper Collection and adhere. Cut out the detail die from the same die set in white cardstock and adhere. Cut out the center outline piece in white cardstock and sponge with distress ink, cut out the center piece in pink designer paper from the Sweet Magnolia Paper Collection and adhere all. Cut out the detail butterfly with the Large Floral Butterfly Die in white cardstock and sponge with distress inks, adhere with foam tape.

Stamp the Large and Small Sweet Peony Cling Stamp Set in Fuchsia Pink, sponge centers with Vivid Chartreuse and the outer petals with Fuchsia Pink, cut out with coordinating dies and sculpt with the 3D Floral Basics Shaping Mold, add stamens and glitter. Stamp the leaves from the Leafy Accents Cling Stamp Set in Fern Green and sponge Fuchsia Pink and Fern Green, cut out with coordinating dies and sculpt with the 3D Leafy Accents Shaping Mold.

Stamp the sentiment from the Celebrate Love Sentiments Cling Stamp Set on white cardstock and cut out with the Arrows and Banner Die and adhere with foam tape. Arrange sentiment and flowers as pictured and adhere.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine, Copic BV00, BG11

Instructions: For the base use Gateway Fold Card – White. Cut panel using outside Teardrop Lattice Gateway Die from paper collection and place into card using Designer Dries Clear Adhesive. Cut using Teardrop Lattice Gateway Die decorative frame from paper collection and place using Darice Adhesive Foam Strips and hot glue.

To create butterfly, stamp the Small Floral Butterfly Cling Stamp Set on the white paper with Ranger Archival Ink Pad - Jet Black, cut out with the coordinating die. Colour with copics BV00, BG11. Sponge the butterfly with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

To create Magnolia flowers, Sweet Magnolia Blooms Cling Stamp Set on white paper with Ranger Archival Ink Pad - Magenta Hue and cut using the coordinating dies. You will need 2 petals of each to create flowers, for bigger flower use the biggest stamp, for smaller flower use smaller size stamp. Colour the flower with Ranger Archival Ink Pad - Magenta Hue using a sponge dauber. After colouring, place the flowers into the mold and run through cutting/embossing machine. Pierce the center and glue in some stamens using hot glue gun. Add a little hot glue to the underside of the flower. Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

To create leaves, Stamp the Sweet Magnolia Blooms Cling Stamp Set and Large Floral Butterfly Accents Cling Stamp Set on the white paper with Ranger Archival Ink Pad - Leaf Green, cut out with the coordinating dies, shade using this same ink and shape. Sponge the leaves with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Stamp sentiment using Special Birthday Sentiments Cling Stamp Set on the piece of paper collection with Ranger Archival Ink Pad - Jet Black and place onto the card using adhesive foam strips. Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

Other Products: Hot glue, white card

Instructions: Score and fold a 7.25” x 10” card at 5”. Place the largest elegant swirl die over the fold and diecut to create a shaped card. Die cut a second complete shape using white card and a 2nd using paper from the collection -adhere both to the card base.

Die cut the largest decorative gateway die using white card and adhere to the card base using dries clear glue.

Select a 3.5” x 4.5” panel from the paper collection and layer onto a slightly larger piece of white card. Stamp the sentiment to the bottom left of the panel using black ink. Adhere this to the centre of the card base, allowing space at the top to adhere the flowers.

Stamp 3 of the leaves onto flower shaping paper using bamboo leaves ink, colour using pistachio and diecut. Edge the leaves with bamboo leaves ink and add cottage ivy ink to the swirls. Place face down into the mold, spritz with water and run through the diecutting machine to shape.

Create the open flowers: Stamp onto flower shaping paper using lilac posies ink, die cut. Add rose bud ink to the tips of the petals and cover the reverse with the same colour. Place face down into the mold, spritz with water and run through the die cutting machine to shape. Adhere 2 sets of offset petals together, place dries clear adhesive in the centre and add prills, allow to dry and remove excess.

Create the roses: Stamp onto flower shaping paper using lilac posies ink, die cut. Add rose bud ink to the tips of the petals and cover the reverse with the same colour. Place face down into the mold, spritz with water and run through the die cutting machine to shape. Create a bud with the smallest flower – use dries clear or hot glue in the centre of the unstamped set of petals, use your fingers to curl the petals up to the centre and allow the glue to set before moving onto the 2nd layer. For the 3rd layer turn the petals to stamp side up and add as many layers as required to complete the rose.

Stamp the baby’s friends onto white stamping card using memento in, allow to dry and colour using the zig markers. Colour the tiny flowers using sparkle gel pens. Die cut and shape using the flower shaping tools.

Position the flowers, leaves and baby‘s friends around the central panel and secure using hot glue. Sponge dries clear adhesive onto the flowers and sprinkle with crystal clear to add sparkle.

Other Products: Foam tape, alcohol markers, acetate sheet, cream pearlescent cardstock, hot glue.

Instructions: Create a vertical card base of size 6 by 7” and cut a piece of pattern paper from the sweet Magnolia paper collection to mat on it. Cut two pieces of pattern paper using the outer die from the Royale Gateway die set and score at 1 1/2” on ends and make folds. Cut the decorative gateway die with cardstock and adhere the decorative gateway die cut on the prepared pieces using foam strips, cut off excess die cut coming outside the folds. Now adhere the folds of these prepared gates on the back of the pattern paper creating a gatefold on both sides , now adhere the prepared card on the card base.

Stamp the images from the sweet magnolia buds stamp set with archival fern green and color with alcohol markers. Cut the images using their coordinating dies. Stamp the flowers from the sweet Magnolia blooms stamp set with archival magenta hues and color the petals using the same ink. Cut and shape the petals using the coordinating 3d shaping mold.

Arrange everything as shown and adhere the stamped images with foam tape and glue the flowers using hot glue. Lastly, dust the flowers with glitter.

Other Products: White cardstock, Big-Shot Machine.

Instructions: Card Size is 5” x 7” (final Size). Take pattern paper from the HCDP1-2126 Sweet Magnolia Paper Collection, distress the edges and adhere it on card base using Designer Dries Clear Adhesive.

Cut one die from Regal Lattice Gateway HCD2-7339 on white cardstock and adhere it using foam tape. Cut one Eyelet Frame Gateway die HCD2-7340 on pattern paper from the collection and adhere it using foam tape. Cut another die from Regal Lattice Gateway HCD2-7339 on white cardstock, adhere using Designer Dries Clear Adhesive.

Stamp Buds image from Sweet Magnolia Buds Cling Stamp Set on white cardstock using archival ink- library green and cactus flower. Cut them with coordinating die and adhere them as shown, add crystal clear glitter. Stamp some flower petals and leaves image from Sweet Magnolia Blooms Cling Stamp Set HCPC-3948 on white cardstock using archival ink-cactus flower and library green (for leaves) and color them using archival ink-magenta hue and vibrant fuchsia and, and leaf green for leaves, giving a touch of library green and plum, as pictured. Cut them with coordinating die, shape them using 3D Magnolia Shaping Mold HCFB1-5005 and add stamen and crystal clear glitter. Arrange them as shown.

Cut one tag die from Ornamental Tags Die HCD1-7203 on white cardstock and add sentiment from Celebrate Love Sentiments Cling Stamp Set HCPC-3847 using archival ink-Vibrant Fuchsia.

Other Products: Die cutting machine Cut’n’boss, heatgun, water mister, hot glue gun, hot glue, scissors, sewing tread, cheesethread, ribbon, florist tape

Instructions: The finished card measure 6 x 6 inches. Cut a piece of white cardstock in deluxe flower shaping paper 12 x 6 inches and score at 6 inches to make a top fold card. Cut 1 piece of paper 5 3/4 x 5 3/4 inches in sheet #10B, one piece of white cardstock 5 1/4 x 5 1/4 inches, one piece of paper #2B 5 x 5 inches and finally a 4 3/4 x 4 3/4 inches in a white cardstock. Glue all those layers on the card base.

Cut a piece in sheet #11B 2 1/2 x 4 inches and tear in the side. Cut a piece of paper from sheet #2B, contouring the flowers and paste under the first piece. Die cut a doily in a white cardstock, cut it in two and paste between the two parts. Glue everything on the card base with 3D foam.

Stamp your Magnolia flowers with Magenta Hue ink onto white flower shaping paper, color the centre and shade the edge with the same color. You can also color the back of the flowers. Diecut with the coordinating die. Place facedown into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe flower shaping kit tools. Glue 3 layers together. In the center of the flowers make a hole and add stamens. (I made 1 big flower and 5 medium). Also stamp leaves with leaf green and die cut. Make a montage of the flowers and leaves with the florist’s tape. Add a ribbon. Put a little bit of glue on the flowers and dip them in the glitter to make them shine.

Put cheesecloth and sewing thread in the left of your card and glue flowers and leaves over it.

Die cut 3 sentiment on a white cardstock and glue them together to give thickness to the sentiment. Glue in the middle of your card.

To add the final touch, add dots with nuvo crystal drop dandelion in the center of the flowers printed on the pattern paper. Cut 2 pattern paper 6 x 6 inches and glue inside the card.

Other Products: Black Embossing Powder, Cardstock- White, Embossing Pad, Paper Distresser, Water brush, Gems, Packaged Title, Scrapbook Adhesives by 3L (Crafty Foam Tape, E-Z Runner Ultra, Creative Photo Corners White, Adhesive Dots Mini), cardstock- White

Instructions: The patterned paper with the butterflies in the corners is the background. But I wanted to cover up most of those butterflies. First cut a square that is 3”, then cut diagonally to create the base of the corners. Add strips of distressed patterned paper to those corners. Yellow, teal, purple and then blue. Snip off the ends of the strips then add to the corners of the layout covering the butterfly images. Find and cut out the purple lacy border strip and add to the plaid corner piece.

Mat the cropped photo in white cardstock, then die cut the Eyelet Lace Frame from white cardstock. Add white photo corners to the photo. Add the matted photo to the frame using foam tape. Then cut a mat of teal patterned paper for the framed photo. Mat that also in white cardstock. Adhere to the middle of the layout.

Stamp and die cut 2 sets of all of the Small Floral Butterfly images and the mini butterflies from the Large Floral Butterfly set using an embossing pad and black embossing powder. I added colors to the butterflies using Zig Clean Color Markers and a water. brush. Pink Butterflies- Pink, Yellow, Light Carmine; Purple Butterflies- Cobalt Blue, Light Green, Violet, Persian Blue; Green Butterflies- Cobalt Blue, Light Green, Pale Green. Shape the butterflies slightly using your shaping tools.

Add the title piece to the bottom left-hand corner of the layout. Add the butterflies diagonally across the layout. Then I added coordinating gems around the butterflies.

Other Products: Die Cut Machine, Hot Glue Gun, Heat Gun, White Enbossing Powder, Seam Binding, Stormy Sky Distress Ink, Scor-Tape, ColorBox Frost White Ink

Instructions: My finished card size is 5 1/2 x 7 1/2”. To make card base, use a sheet of 8 1/2 x 11” cardstock and cut at 5 1/2". Score one piece at 1" and fold. Add glue to this scored flap and glue the other piece of cardstock to it. Now cut off the 1" off overhang so that both pieces are the same. Cover the card base with a piece of the paper. I used sheet 9B for this.

Using white cardstock cut out the Regal Lattice Gateway Die and glue it to the card front and set aside while you work on the other elements of the card.

Stamp the flower petals onto Art Foam Paper using Sky blue and stamp the leaves using Fern Green ink. Set aside and allow to dry. It takes quite a while, so be patient. I actually let mine dry overnight. Using coordinating dies cut out the flower and the leaves. Using the Stack and Store Daubers add pink peony ink to the petals and then edge the petals with more Sky Blue ink. I added Leaf Green to the leaves and then edged them with more Fern Green. Using the heat bun and a pick to hold the petals, warm the petals until they begin to curl. I used a sponge and dries clear adhesive to add the Frosting Powder to the leaves and flower petals. Form the flower using hot glue and then adhere to card front with the hot glue as well.

Stamp the little butterflies with white ink and emboss with white embossing powder. Color using Pink Peony and Danube Blue inks. Glue them across the top of the card. They are so delicate, and I just love them fluttering there!

Now cut a piece of white seam binding and color using Stormy Sky Distress ink. Scrunch and allow to dry. Tie a bow and adhere to the card front. I used Scor-Tape and Dries Clear Adhesive to adhere the bow.

Other Products: Die Cutting machine, Trimmer or Guillotine, Score board, Scissors, Bone folder, Hot glue Gun, Gems, Memento Dye Ink Pad - Grape Jelly and Pear tart, 20” of 3/8” ribbon, Ranger Liquid Pearls - opal white 1/8” hole punch

Instructions: Card measures 5 inches by 7 inches. To create a card base - cut out a 14” x 5” piece of HCPP1-438-2 White Card, score it at 7” (long side up), then fold using a bone folder along the score lines. Cut out 6 7/8” x 4 7/8” piece of HCDP1-2111 Cottage Garden Paper Collection, then distress the edges with TSMP708 Memento Dye Ink Pad - Paris Dusk using HCDA1-449 Stack and Store Daubers and adhere final piece inside of the card. Using a trimmer or craft knife and ruler, cut out half of the card front (2 1/2” x 7”). Cut out 2 3/8” x 6 7/8” piece of HCDP1-2111 Cottage Garden Paper Collection, then distress the edges with TSMP708 Memento Dye Ink Pad - Paris Dusk using HCDA1-449 Stack and Store Daubers and adhere final piece on the card front. Die cut two tags from HCDP1-2111 Cottage Garden Paper Collection using HCD1-7201 Ticket and Tags Die, then distress the edges with TSMP608 Memento Dye Ink Pad - Paris Dusk, add the hole using 1/8” hole punch hole punch and the bows on the top. Adhere final pieces to the card front using Dries Clear glue and 3D foam.

Stamp the large and small Hyacinth image from HCPC-3947 Fragrant Hyacinth Cling Stamp Set on HCPP1-475 Deluxe Flower Shaping Paper with TSMP708 Memento Dye Ink Pad - Olive Grove, then colour the images with Memento Dye Ink Pads – Bamboo Leaves, Pear Tart and Paris Dusk using 282873 Tombow Dual Brush Marker N00 Blender and HCDA1-449 daubers. Die cut the images with matching HCD1-7345 Fragrant Hyacinth Die and adhere them on the left side of the card front. Stamp the Hyacinth petal images from HCPC-3947 Fragrant Hyacinth Cling Stamp Set on HCDP1-2125 Spring Garden Paper Collection with TSMP608 Memento Dye Ink Pad - Paris Dusk, then colour the images with the same ink using HCDA1-449 daubers. Die cut the images with matching HCD1-7345 Fragrant Hyacinth Die, shape them with HCST1-401 Deluxe Flower Shaping Kit and adhere them to the Hyacinth flower as shown, then apply NU659 Nuvo Crystal Drops - Navy Blue on the centre of each of the petals. Stamp the leaf images from HCPC-3835 Leafy Accents Cling Stamp Set on HCPP1-475 Deluxe Flower Shaping Paper with TSMP708 Memento Dye Ink Pad - Olive Grove, then colour the images with Memento Dye Ink Pad - Bamboo Leaves using HCDA1-449 daubers. Die cut the images with matching HCD1-7193 Leafy Accents Die, then shape them using HCFB1-467 3D Leafy Accents Shaping Mold and HCST1-401 Deluxe Flower Shaping Kit.

Cut out piece with the sentiment and the same size piece of HCDP1-2111 Cottage Garden Paper Collection, distress the edges with TSMP608 Memento Dye Ink Pad - Paris Dusk, then adhere them to the card from using 3D foam.

As a final touch apply Dries Clear Adhesive using Hydra sponge on selected leaves and flowers, then sprinkle them with Crystal Ultrafine Transparent Glitter, and leave the card to dry completely.

Other Products: Nuvo Crystal clear, card blank 6 3/4”, versamark, Victorian Velvet/Mowed Lawn Distress Oxide, hot glue

Instructions: Mat and layer a 6 x 6” panel onto yellow from the Sweet Magnolia Collection, edge in Pink Peony and adhere to the inside of the card. Mat and layer Sweet Magnolia onto white cardstock 6 1/4” mount with dots onto the front of card, edge designer paper in Pink Peony.

Stamp in Leaf Green Leafy Accents onto Deluxe Flower Shaping Paper. Colour in Vivid Chartreuse and die-cut. Edge and colour the back of the leaves with Fern Green. Spritz the die-cut and run through the die-cutting machine in the mold.

Stamp in versamark onto white cardstock Peony Bud and Blossom and white heat emboss.

Smoosh distress oxide onto a craft mat and add water, use a brush to pick up the colour and fill in the buds and blossoms. To get darker tones add more concentrated ink/water ratio to the base of the petals and die-cut.

Die-cut Royal Gateway multiple times in white cardstock and adhere together to give dimension. Adhere to the front of the card then adhere with hot glue Leafy Accents, Peony Buds and Blossoms. Paint on Crystal lacquer and add sparkle.

Stamp in Jet Black ‘In Sympathy’ onto white cardstock and die-cut arrow around, edge in Pink Peony and add with dots.

Add Nuvo drops as water droplets (can use clear hot glue instead)

Other Products: Iris cardstock, clear gloss gel medium

Instructions: Cut a piece of Deluxe Flower Shaping Paper 10” x 7”, score at 5” along the long side and fold to create a base card of 5” x 7”. Cut a piece of blue pattern paper 5” x 7” and adhere to the front of the card. Cut a piece of white cardstock 4 5/8” x 6 5/8” and adhere to the front of the card. Cut a piece of pale blue pattern paper 4 1/2" x 6 1/2" and adhere to the front of the white cardstock. Die cut the outer decorative frame out of white cardstock using the No. 1 and No. 2 dies from the HCD2-7339 Regal Lattice Gateway Die set and adhere to the front of the card with thin foam strips. Die cut the inner lattice die out of white cardstock using the No. 2 and No. 3 dies from the HCD2-7339 Regal Lattice Gateway Die set and adhere to the centre of the frame.

Stamp the leaf and flower images from the HCPC-3952 Floral Butterfly Accents Cling Stamp Set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating dies. Add Crystal Ultrafine Glitter using clear gloss gel medium. Trim the ends and add the leaf and flowers to the centre of the frame over the lattice as shown.

Die cut a tag from the HCD1-7203 Ornamental Tags Die set out of white cardstock. Trim the long decorative edge and adhere to the base of the flowers as shown with foam squares. Stamp the sentiment from the HCPC-3843 Special Birthday Sentiments Cling Stamp set in Jet Black ink on white cardstock and die cut with the inner die from the tag and adhere it to the front of the tag.

Stamp the butterfly images from the HCPC-3953 Small Floral Butterfly Cling Stamp Set and HCPC-3951 Large Floral Butterfly Cling Stamp Set set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating dies. Add Ultrafine glitter using clear gloss gel medium to the smaller butterflies and with 3D Crystal lacquer to the larger butterfly. Adhere to the card as shown.

To finish, add pearls to the lattice and corners as shown.

Other Products: White cardstock, light color chipboard, foam sheet, pearls, Copics: RV04, RV02, RV10, Y11, Y15, Y18, V01, V12, V15, YG03, YG17,

Instructions: Card size: 6 x 7 1/8”. Make the base from heavy weight white cardstock. Cut a piece of light green decorative paper to 5 3/4 x 6 7/8” then glue it to the base front.

Die cut the Ornate Pocket Accent once on the left side of a 6 x 7” piece of white (without the die to cut the V shape), then turn the die around and match the end, die cut again to form the full rectangle die cut with a diamond shape in the center. Do this again on a piece of light-colored chipboard then glue them together. The chipboard will not die cut all the way through easily but that is good because you want the little pieces to stay in for this. Cut a piece of plaid decorative paper to fit the “diamond” in the center (3 1/2" square). Glue the plaid to the center, glue strips of pearls around diamond. Glue pearls as desired on the rectangle die cut and pop up the entire layer with foam sheet to fit under chipboard.

Using black ink, stamp some butterflies from the small Floral Butterfly set, stamp 3 sets of flower stems, 2-3 fern, die cut and color all. Stamp using Majestic Violet, the Magnolia Blooms (enough for at least 5 flowers, 3 of which have multiple layers). Sponge the backs and edges leaving the fronts whitish, die cut and form in the shaping mold. The smaller flowers are also shaped after the mold with tools. Insert Rock Candy green stamen. Stamp leaves with Fern Green and sponge with Leaf Green and Majestic Violet, die cut and shape in the mold. Stamp sentiment using Majestic Violet onto light green decorative paper then die cut with the circle die, die cut a bit larger circle from white for a mat. Die cut a small circle from foam to pop the sentiment up then adhere to the center of the diamond.

Arrange all the flower stems, and fern (cutting fern and flowers as necessary) to make a bouquet on the right side of the circle sentiment. Add in the Magnolia Blooms to finish bouquet, add leaves and sheer bow then glitter all the flowers. Paint lacquer onto the Magnolia leaves.

Stamp 2 small butterflies from the Spring Daffodil using Majestic Violet, sponge, die cut and glue the 2 bodies together leaving wings free. Add this small double butterfly to the circle sentiment then add the other 2 butterflies to the left side of diamond center. Use the Swirl Pearls to make little butterfly trails coming from the butterflies. Glitter the butterflies and card base randomly.

Other Products: White cardstock, VersaMark, Infusions – Violetta and Magenta, Diecutting Machine, Small Glue Dots, Dimensional Tape, Water Spritzer

Instructions: Card size is 7 x 5”. Score and fold 10 x 7” white cardstock at 5” on the long side. Cut two pieces of Luxe Gold Cardstock 6 7/8” x 4 7/8”. Cut one piece of Floral Butterfly Paper Collection, Sheet 8B, 6 3/4 x 4 3/4”.

On 7 1/2 x 5 1/2” white cardstock, stamp the five butterflies from the Small Floral Butterfly Cling Stamp Set randomly using VersaMark ink, sprinkle with gold embossing powder and heat set using Heat It Tool. Stamp the butterfly from the Delightful Daffodil & Butterfly Cling Stamp Set and the ‘Happy Birthday’ sentiment from Special Birthday Sentiments Cling Stamp Set on 4 x 5” white cardstock using VersaMark ink, sprinkle with gold embossing powder and heat set using Heat It Tool. Sprinkle the Violetta and Magenta Infusions on both pieces of cardstock, spritz with water until desired color is achieved and dry using the Heat It Tool.

Trim the 7 1/2 x 5 1/2” infusion colored cardstock to 6 3/4 x 4 3/4”, adhere to one of the 6 7/8 x 4 7/8” Luxe Gold Cardstock and adhere to the card front using dimensional tape. Diecut the stamped butterfly from the 4 x 5” infusion colored cardstock. Diecut the butterfly again from Luxe Gold Cardstock. Diecut the butterfly overlay from Luxe Gold Cardstock, lightly shape and adhere the three layers together using dries clear adhesive. Adhere to the card front using dimensional dots. Diecut the infusion colored sentiment using the banner die from the Arrows and Banner Die set. Using the same die, cut Luxe Gold Cardstock mat layer. Adhere together, slightly offset, using dries clear adhesive and adhere to the card front using dimensional tape.

Ink the edges of the 6 3/4 x 4 3/4” designer paper using Majestic Violet ink, adhere to the other 6 7/8 x 4 7/8” Luxe Gold Cardstock and adhere to the inside of the card. Stamp the ‘Have a Wonderful Birthday’ sentiment using Majestic Violet ink on the journal block from sheet 3A from the Floral Butterfly Paper Collection, diecut using the Album and Tags Accents Die and adhere to the inside of the card.

Other Products: Aqua Blends by Spectrum Noir: Flowers: Wheat, Hickory, Pineapple. Twigs: Nutmeg, Umber. Small Butterfly: Kiwi, Mango. Leaves: Oregano, Cypress. Other: Fussy cutting scissors, Double sided foam squares, Hot glue gun, White card stock, Yellow stickles, sewing pattern tracing tool, Stamen punch, yellow card stock (for stamens), Double sided tape, inking, Hot glue gun.

Instructions: This is a slim card measuring 3 1/2” x 8 1/2”. Taking the card stock and cut a card base measuring the above measurements

Finding the yellow checked print in the paper collection and cut this a little smaller than the card front. Cut also a piece for the card inside. Taking the pattern tracing tool and a ruler, run along each edge of the papers at less than 1/4” away from the edge to make holes. Adhere these papers to the card. Using foam tape on the card front and double sided tape or adhesive for the inside of the card.

Die cut the sentiment and the small doily from the white card stock, the small circle from the yellow checked paper. Adhere in place to the card front. Make the rest of the embellishments for the card. Making x3 magnolias, x3 magnolia buds and x6 leaves. Bring shape to the embellishments by using the mold and the shaping tools. The colours used are listed in the other product list.

Arrange and adhere the embellishments using the hot glue gun and the clear drying adhesive. Apply a little yellow stickles to the stamens to finish the card.

Other Products: Cutting machine, white paper 120g, paper trimmer or guillotine, ruler

Instructions: Prepare the base. Fold the white cardstock in half and cut to 4.25” x 6”. From the remaining piece, cut a rectangle measuring 3.5” x 5.5”. From sheet 11A of the Delightful Daffodil Paper Collection, measure and cut a thin rectangle measuring 1.5” x 5.5”. Adhere to the right side with the smaller rectangle, then glue it to the base.

Prepare 2 leaves from the HCPC-3931 Large Floral Urn set and a flower pattern from the HCPC-3952 Floral Butterfly Accents Cling Stamp Set. Stamp on plain 120g white paper using the Pistachio color for the leaves and the Bamboo Leaves color for the flower pattern. Cut with matching dies. Shape the leaves with your fingers, grab the sides of each individual leaf, join them together for a moment, creating a recess in the middle, while lifting the sides of the leaf up. Make a simple composition as shown.

Prepare a sentiment on smooth 120g paper. Use the sentiment from the HCPC-3843 Special Birthday Sentiments set. Use the color of Bamboo Leaves to stamp. Cut the lettering to 1 '' x 3.5 '' to form a thin rectangle. Place on the foam strips at the bottom of the card as shown. And ready. Make your loved one happy.

Other Products: Versafine onyx, clear heat embossing, 6 x 6” card blank, paper Trimmer/scissors

Instructions: Stamp in Fern Green Archival Special sentiments (TO MY SWEET FRIEND and Sending You Birthday Love) and mat onto red designer paper from Floral Shoppe edged in Plum Archival. Line the inside of the card with designer paper and add sentiment ‘Sending You Birthday Love’ to the center on dots.

From Floral Shoppe Paper Collection die-cut 4x corners using Ornate Pocket Accents Die together with Stairway Gardens Die Eyelet 6 x 6” frame, leaving approx. 1/4” border around the corner and score the bottom edge, cut a tab to adhere to the card blank. Cut to size 6 x 6” designer paper in red and adhere over the visible tabs. Stack 3x dots together and adhere to the middle of the sentiment and adhere to the red lining at the center.

Stamp onto white cardstock in versafine onyx the Floral Shoppe Accents and clear heat emboss. Use Zig Clean Color Real Brush Markers to color, die-cut and tuck into the open areas of the corners and secure with Dries Clear adhesive.

Add gems to the centers of the flowers. Shape the corners to curl and tuck under the center sentiment.

Other Products: Die cutting machine, watercolor markers, ribbon

Instructions: Cut out the white base of the card and fold it to 8 1/2" x 5 1/2". From the paper collection, cut an 8"x 5 1/4" rectangle and adhere to the base. From the white paper, cut a larger frame from the Regal Lattice Gateway Die set, cut a smaller frame from the same set from the paper collection and glue the openwork frame made of white paper.

Stamp the images from the Small Floral Butterfly Die Set and Floral Butterfly Accents Die and Wild Aster Spray Cling Stamp Set using Fern Green Archive Ink. Cut out the images with matching dies. Color with watercolor markers. Stamp the Butterfly in Manganese Blue, cut with a matching die and shade with pink ink.

To create rose shaped flowers, stamp the Small Wild Rose on the Deluxe Flower Shaping paper a few times using Ranger Archival Ink Rose Madder then shadow with the same ink and die cut using the coordinating die. Form with coordinating mold. Put glue and Bright Ideas Prills in the center.

To create leaves, stamp the Leafy Accents Cling Stamp Set on the Deluxe Flower Shaping paper with Ranger Archival Ink Pad - Leaf Green, die cut with the coordinating die, shade using this same ink. Shape leaves using 3D Leafy Accents Shaping Mold.

Stamp Sentiment with black ink on a strip of paper, cut with scissors. Arrange everything as pictured. Finally, add ribbon, sentiment, cover with glue and glitter.

Other Products: Water colour paper, Dimensional adhesive, Waterproof black ink, paper trimmer, die cutting machine

Instructions: Create a card base from white card stock measuring 6” x 12”. Score at the 6” mark on the long side and fold in half to make a top fold card. Cut a mat layer in white stock measuring 5 3/4” x 5 3/4”. Adhere this whole piece on the card front. Cut pattern paper from paper collection to size 5 1/4" x 5 1/4” and adhere this whole piece on the first mat layer.

Stamp the large floral butterfly with black waterproof ink on the water colour paper. Colour with Zig colour markers using shades of yellow, orange and pink. Cut using the Large butterfly die. Cut two die cuts using the inner decorative circle die from the Courtyard elegance die set in white card stock.

Die cut in Luxe Gold paper the outer most die from Large Butterfly die and adhere the coloured butterfly on this. Adhere the whole piece using dimensional tape on the card front in a tilted way. Adhere the two decorative die cuts on the two sides of the butterfly.

Stamp the sentiment in black ink on the card front to finish the card.