Instructions:

Card size: 4 3/4" x 6 3/4". Make a shaped card (see video) with the Decorative Circles Frame outer die on a folded card (folded measures 5 x 7” with fold at the top). Lay the die over the edge of fold about 1/4" so that most of fold stays intact. Cut another card front with the full outer die from white cardstock and also from pink decorative paper. Glue the 2 whole front pieces together but do not glue to card.

Cut a circle about 3 5/8” from front 2 pieces that are glued. Cut a piece of foam sheet the size of front then cut a circle from it to match the circle in the front piece, glue it under the front. Find a piece of decorative paper that has a large circle design to cut out that will show through the cutout circle on card front (it should be cut out a little larger, 3 3/4" would be good).

Stamp the sentiment on the decorative circle using Mulberry Archival Ink. Glue the circle to the center of the card base (make sure that edges will be covered when you glue the card front on top of it). Now glue the card front on the card base making sure to match edges and make sure circle with sentiment shows nicely).

To give the card even more dimension, cut the decorative Circle Frame from gold and from foam sheet to pop up. Cut a circle from centers of both, then glue together, then glue to card front. Now make a nice circle frame with 2 circle dies to finish circle opening. Cut from pink, add foam strips underneath then attach to the circle opening. All these popped up elements gives the cards faux window extra dimension for the viewer.

Stamp poppies using the Wild Poppy Bouquet, die cut and color. Stamp the Wild Poppy blossoms using Coastal Coral on some and Mulberry on others, stamp enough for 2 blossom each. Sponge the blossoms, die cut then shape in the Shaping Mold (see video). Stamp several extra centers, color then hole punch (about 1/4" hole punch), shape from the back to make like a dome shape then add hot glue dot under each dome to help it keep it’s shape. Glue flower blossoms together in sets of 2, add the punched centers then add a line of liquid glue around the center and sprinkle with Power Outage Prills. Glue each flower to a stem of the EZ Stem Floral Wires (there will be 7 flowers).

Glue the stamped image of poppies and the stem onto card at left side of the circle opening (cut image as needed to glue poppies under stem but leaves on top of stem). Add glitter to the flowers also add lacquer to the leaves.

Other Products: White cardstock, Copic Markers: YG03, YG25, YG17, R21, R22, Fun Foam sheet

Instructions:

Cut a piece of white cardstock to 5 x 8 1/2”, score and fold at 7”. Cut a second piece of white cardstock at 5 x 7” and glue the folded portion over the top of the 5 x 7” piece which will become the card front panel. This flap will be covered by card front layers. From the HCD2-7381 Fancy Classic Oval Frame Die use the largest die and position it over the card base so that the top hangs over the fold line preserving the fold. Run this through your die cut machine to create your card base. Use this same die to cut 2 more white cardstock layers, a light green paper layer and a lightly patterned paper layer both from the HCDP1-2139 Wild Poppy Paper Pad. The first white card stock layer gets glued to the card base to give it a completed shape. Once glued, set aside until the end. The second cardstock layer will be where the scene is built. Using this card front panel, glue the light green paper layer down using the Dries Clear Glue. Use the plain oval die to cut a light green oval and the second and third largest dies from the HCD2-7381 Fancy Classic Oval Frame Die and cut both a Luxe Gold Cardstock layer as well as a cream colored layer. Glue these two layers together using Dries Clear Glue offsetting the gold behind the cream before adhering them to the card. The thin die cut is glued directly to the green card front and the inner die is popped up with dimensional adhesive. From HCD2-7338 Lattice Flourish Gateway Die cut a black fence from the black paper in the HCDP1-2139 Wild Poppy Paper Collection. Using the green oval as a guide, trim the fence to fit the bottom half of the oval, do not attach the fence. Adhere the green oval to the center of your card front. Using HCD1-7203 Ornamental Tags Die cut a small tag from the Wild Poppy Paper Pad and stamp “It’s Been A While” in Poppy ink using the HCPC-3844 For My Friend Sentiments Cling Stamp Set. Attach the sentiment with gold twine to the fence post. Using this same stamp set also stamp the “I miss you” stamp onto a scrap of the cream colored paper used earlier and die cut using the HCD2-7308 Majestic Swirl Frames Die. Also cut a Luxe Gold Cardstock frame from this same die to finish the inside sentiment.

Stamp the small set 2x, and the second smallest set of flowers 5x from the HCPC-3986 Wild Poppy Cling Stamp Set on white cardstock in Red Geranium. Stamp the leaf vine 2x from white cardstock.

Using the Stack and Store Daubers color each flower using Poppy ink making sure to leave white around the flowers edge. Ink the edges using the Red Geranium ink. Color the backside as desired. Color each vine using a light coat of the Vivid Chartreuse ink adding Olive ink to the tips and vine as shown.

Shape the Poppy’s and shown using a light mist of water and your hands along with the Deluxe Flower Shaping Kit. For the black stamens a black alcohol marker was used to color white pearl stamens. Using 3 layers for the larger 2x, and 2 layers for the smaller flowers 3x, glue your flower petals and pierce a hole in the center of each flower with the Grooved Golf Tools. Thread one green wire stamen along with a bunch of black small stamens through the holes of the larger 2 flowers and attach with glue gun. For the small flowers simply thread black stamens through and glue to the back with hot glue. For the bud shape three larger petals to form bud and glue together with dries clear glue. Pierce a hole in the end and run a EZ stem floral wire in and attach to the inside of bud with hot glue. Attach the EZ Stem Floral Wire to the other flowers behind the gate by gluing the stems to the stamen threads (or directly to the back of the smallest flower) with a glue gun, then cover glue joint with a small amount of florist tape. Shape the leaves using the Groove Golf Tool Set. Sponge Dries Clear glue over flowers and sprinkle with Rajni Chawla’s Crystal clear glitter and tap off.

Arrange the stemmed flowers on the green oval section of the card using the fence as a guide. Glue stems with hot glue once the placement is decided. Attach fence using Adhesive Foam Strips. Arrange leaves and smaller flowers as desired. Score the card base front in half into a mountain fold to allow for the easel, and glue the lightly patterned paper layer on the inside making sure to trim just a little off the top so the card can fold. Now glue the bottom half of the card front to the bottom half of the card base.

Add the sentiment to use as a stopper inside the card to allow your card to stand.

Other Products: Ranger Archival Ink in Poppy, gold metallic thread, dimensional adhesive, black alcohol marker, florist tape, hot glue, hot glue gun, paper trimmer, die cut machine.

Instructions:

Cut a base of Ivory card stock of size 8 x 12", score and fold to create 8 x 6" card base.
Cut a piece of sheet 9B from the Wild Poppy paper collection, to 5 7/8 x 7 7/8" and adhere on the front. Similarly take a piece of the same size from sheet 12B and adhere it on the inside of the card base. Cut a piece of Ivory card stock of size 7 1/2 x 5 1/2", emboss it with Poppy embossing folder. Cut a piece of sheet 6A from the paper collection to size 7 5/8 x 5 5/8" and cut another piece of Ivory card stock to size 7 3/4 x 5 3/4", layer all these pieces on the front. Cut a strip of sheet 3B of size 2 x 7 1/2" and another strip of sheet 6A of size 2 1/8 x 7 1/2", layer them on the center.

Use HCD1-7263 - Swirly Accent Spray Die to die-cut 6 pieces on Ivory card stock, stack 3 each together and adhere them on the front of the card as shown. Use HCD1-7202 - Album Tags and Accents Die and die-cut the coordinating image from sheet 2A, black heat emboss the sentiment from HCPC-3843 - Special Birthday Sentiments Cling Stamp Set and adhere it to the center of the card. Use HCD1-7263 - Swirly Accent Spray Die to die-cut 4 pieces of Ivory card stock, trim the extra sides and adhere on the inside of the card on each of the corners.

Stamp the images from HCPC-3987 - Wild Poppy Accents cling stamp on white card stock using Fern Green ink. Color the images using Coastal Coral, Carnation Red, Fern Green and Coffee archival inks, cut them using their coordinating dies. Sponge the edges of each of the images using Cobalt ink and add some Crystal Clear glitter by sponging some dries clear glue.

Stamp 4x medium flowers, 6x small flowers and 6x smallest flowers using HCPC-3986 - Wild Poppy cling stamp set on white card stock with Fern Green ink. Color them using Fern Green, Coral Coastal and Carnation Red archival inks, cut them using the coordinating dies and shape themusing the stylus tools. For the large flowers, stack 2 of the medium and 1 small sized petals. For the rest use 2 each of the petals. Use black micro pearls for the flower centers, sponge some dries clear glue on the flower tips and add crystal clear glitter.

Arrange the Poppy accents and the flowers as pictured on the card and adhere them using hot glue.

Other Products: Dimensional adhesive, hot glue, hot glue gun, funnel tray, scissors, paper trimmer, scoring board, die cutting machine, Poppy embossing folder, Ivory cardstock, White cardstock, Onyx Black ink, Clear embossing powder, Black micro pearls, Cobalt archival ink

Instructions:

Create a top fold card measuring 8” x 6”. Cut a piece of paper from Wild Poppy Paper Collection to size 7 3/4” x 5 3/4” and adhere it on white card base. Choose another pattern paper from Wild Poppy Paper Collection and cut it to the size 7 1/4”x 5 1/4”. Layer the panel on gold card-stock making a border of 1/16” on all four sides. Glue this ready panel on the card front.

Die-cut two pieces of fancy frames, one from white card stock and other from gold card stock, using Intricate Swirl Frames Die. Stack both frames together, slightly offset. Layer the die-cut on the ready card panel using foam tape. Glue only white inner rectangular die-cut inside the frame.

Next, die-cut a decorative oval piece from gold card stock using Royal Elegance Frames Die and die cut a simple oval piece from designer paper using a die from same set. Stamp a sentiment on an oval piece using Cottage Ivy Momento dye ink. Glue this oval piece on a gold decorative oval die cut. Adhere it on a card using dimensional tape.

Stamp Wild Poppy on Deluxe flower shaping paper using Encore ultimate metallic gold ink and heat emboss them using Aged Ivory embossing enamel. Color half flowers using Coastal Coral archival ink and Morocco momento dye ink and half flowers using Coastal Coral archival ink and Festive berries distress oxide ink. Cut the flowers using their coordinating dies and shape them using 3D Wild Poppy Shapping mold. Add the stamens and prills to the centers of flowers. For bud’s sepal stamp some images of smallest flower from Rustic Sunflower stamp set using Fern Green Archival ink and color them using Leaf green Archival ink. Cut them using coordinating dies and shape them using Deluxe Flower Shaping Kit. Next stamp the images from Wild Poppy Accent Cling stamp set using Fern Green Archival ink and color them using zig markets. Cut images using their coordinating dies and shape them using Deluxe Flower Shaping Kit.

For sunflowers, stamp the images of smallest flower on Deluxe Flower Shaping Paper from Rustic Sunflower cling stamp set usinyg Leaf Green Archival ink and color the flowers using Sunflower Archival ink, fossilized amber and spiced marmalade distress oxide inks. Cut the flowers using coordinating dies and shape them using coordinating 3D shaping mold. Add prills to the centers of flowers.

Diecut tag from paper collection, punch a hole in the top of the card and attach tag with cord, add beads.  

Assemble everything on the card as shown. For finished look apply Crystal Clear powder using Art glitter dries clear glue. Add Morning dew nuvo drops and some pearls to the card.

Other Products: Dimensional adhesive, hot glue, hot glue gun, die cutting machine, scoreboard, nuvo drops, pearls and beads, Distress oxide ink, Intricate Swirl Frames Die (Retired), Cord, Beads

Instructions:

Cut sheet 5A from the Wild Poppy Paper Pad to 10 1/2 inches square, adhere onto black card cut to 11 inches square, adhere this onto 12 x 12 inches sheet 7A. Adhere photo to Black 11B paper cut to 4 1/2 inches square. Cut a 6 x 6-inch panel from sheet 10B, adhere matted photo to the center of the page.

Using the Palace Gateway Die set, cut four from sheet 11B, cut in half. Adhere these to the reverse of the 6 x 6-inch panel on all four sides. Using Foam tape, adhere to the center of the page.

Use Leaf Green ink, stamp the Wild Poppy Corner Accents die piece onto Deluxe Flower Making paper, five times. Use Olive green ink to highlight the pieces, add a little Rose Madder ink to the blooms. Stamp, color and die cut with the matching dies the other two Wild Poppy Accents four times and die cut out.

Stamp in Rose Madder ink, onto Deluxe Flower Shaping paper, all four Wild Poppy flowers, color with Rose Madder ink and highlight with Pink Peony ink, you will need two extra-large, four large, four medium and eighteen small petals, to make one extra-large, two large, two medium and eighteen small flowers. Place in Wild Poppy or Basic Flower Shaping Mold, lightly spritz with water and run through a die cutting machine. Tap out and when dry, lightly shape with the stylus from the flower shaping tool kit. Ink the edges with Rose Madder ink. Pierce holes in the centers, add two layers at a time of the same sizes, offset the petals and add glue as you go. Thread stamens through the hole using a small piece of wire.

Stamp in black ink onto sheet 11B from the paper pad, lots of small Wild Asters to use as the Poppy centers. Die cut with the matching die. Use the stylus from the tool kit to shape the Asters on the reverse, turn over and shape again in the centers, glue two layers of each size together, offset the petals as you go. You will need four large and six medium petals. Pierce hole in centers, thread Dark Pink Stamens through using a small piece of wire, cut off the ends and glue in place.

To shape all the Wild Poppy Accents, lightly spritz with water, take the foam mat from the Flower Shaping Tool set and the flower shaping tool, lightly shape by hand on the reverse. Using hot glue, adhere the four corner pieces to the corners of the frame.

Take four of the Flower Making EZ Stem Floral Wires, adhere onto the Wild Poppy Accents pieces with hot glue, adhere Wild Poppies to all four EZ Stem Floral Wires, using hot glue. Using one large, one medium and one small Wild Poppy on EZ Stem Floral Wires, arrange together, add flower making tape at the ends and adhere with hot glue. Adhere to the page using hot glue. Adhere the single Wild Poppy with the EZ Stem Floral Wire on the opposite side of the page. Cut the extra corner piece in half, glue at the base of the EZ Stem Floral Wire arrangement to hide the end.

Finish by adhering the small Wild Poppies around the page. Using a sponge and Dries Clear Glue, add glue wherever you would like glitter. Add glitter. Stamp the Time Precious Time Title from the Moments in Time Collection in Jet Black ink, die cut with the matching circle die from the Moments in Time Clock Face Die Outline die, size 2.25 inches, onto paper from the paper pad. Adhere with foam tape. All done.

Other Products: Foam tape, Clear Glitter, Hot Glue Gun, Black card 12x12,

Instructions:

Create base using outside Fancy Classic Rectangle Frame Die cut two pieces from white cardstock, glue it together on the top, using frame die cut from paper collection paper and place into card using Foam Strips for dimension. Cut smaller frame from paper collection and place onto the card using adhesive foam strips. Cut out the smaller frame from paper collection and place on the top of card using adhesive foam strips.

To create Poppy flowers, stamp Wild Poppy Cling Stamp Set on Art Foam paper with Ranger Archival Ink Pad - Red Geranium and cut using the coordinating dies. Colour with Gallery soft oil pastels 209. You will need 3 petals for each to create flowers. Use an iron or heat gun to heat the petals and when they start to shrink move them on the Molding Mat and press on the middle using shaping tool – using a bigger one. Layer the petals together using the hot glue gun making sure to offset them and use a paper piercer to make a hole in the middle and pull through the stamens. Add a little hot glue to the underside of the flower to adhere (watch tutorial). Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Stamp the Leafy Accents Cling Stamp Set and Floral Butterfly Accents Cling Stamp on the white paper with Ranger Archival Ink Pad - Leaf Green, cut out with the coordinating die, shade using this same ink and shape leaves using mold. Sponge the leaves with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine, Gallery soft oil pastels 209

Instructions:

My finished card is 5" x 7". Using white cardstock make card base and cover with a piece of sheet 8B of the paper collection. Set aside while we work on the die cutting.

Using the large shadow die cut a piece of white cardstock and then using Luxe Gold cardstock cut the large border Simply Cassic Rectangle Die. Glue these two together and glue to card front. Cut the next die size down using white cardstock and edge with the Poppy ink. Use Double D Dots to adhere to card front. Use the remaining dies in the set and cut 2 of each out of white cardstock and 1 out of gold. Glue together and layer the gold cardstock, off setting just a bit, behind the white pieces. Glue these to the card front. Stamp the sentiment on the center cut out of white cardstock using Jet Black Ink and use dimensional tape to adhere to the card.

Stamp the Poppy flowers and leaves onto the Deluxe Flower Shaping Paper using Poppy ink and color using Poppy, Tiger Lily and Carnation Red. The leaves are stamped with Jet Black and cut off the main image to use with these blossoms. I colored the leaves with Leaf Green Ink. Use coordinating dies to cut out the flowers and leaves and lay the flowers onto the shaping Mold. Spritz with water and run through the die cut machine and turn out onto the desk to dry. Glue two flower petals together and on the larger flower I used one of the small florals to shape and glue down for the center. On the smaller flowers I did Prills and then all flowers got a ring of Power Outage Prills. Allow everything to dry and then I used a brush and Glossy Accents and coated the petals and sprinkled with glitter then allowed them to dry.

I did a bit of hand shaping on the leaves and then decided on placement of flowers and leaves and glued everything down. The card is finished.

Other Products: Archival Poppy Ink, Die Cut Machine, Misti Stamp Platform, Hot Glue Gun, White Cardstock, Glossy Accents, Dimensional Tape

Instructions:

Cut a piece of black cardstock 12” x 6”, score at 6” along the long side and fold to create a base card of 6” x 6”.

Die cut an eyelet square using the No. 1 die from the HCD1-7281 Stairway Gardens Die out of gold cardstock.  Adhere to the front of the card. Cut a piece of red pattern paper 5 7/8” x. 5 7/8” and adhere over the gold square. Trim a 6” x 6” panel to 5 3/4" x 5 3/4" and adhere to the front of the card.

Die cut two decorative dies from the HCD1-7398 French Courtyard Die – one from black cardstock and one from gold cardstock. Adhere the black die over the gold die offsetting slightly to get a hint of gold. Adhere to the front of the card.

Die cut the sentiment using the No. 2 and No. 3 dies from the HCD1-7398 French Courtyard Die out of black cardstock and adhere to the centre of the decorative die.  Die a plain circle using the No. 4 die out of red pattern paper and adhere to the centre of the sentiment. Die cut the decorative circle using the No. 4 and No. 5 die from the HCD1-7398 French Courtyard Die out of gold cardstock and adhere to the centre of the sentiment as shown.

Stamp the poppy images from the HCPC-3987 Wild Poppy Accents Cling Stamp Set and the HCPC-3988 Wild Poppy Bouquet Cling Stamp Set in Jet Black ink on watercolour paper. Colour the images with watercolour paints and die cut with the coordinating dies. Adhere to the left side and bottom right of the card. Add Black Flower Pearls to the flowers.

Stamp the poppy images from the HCPC-3986 Wild Poppy Cling Stamp Set in Red Geranium ink on Deluxe Flower Shaping Paper. Colour the images with Lady Bug ink and die cut with the coordinating dies. Colour the backs of the flowers with Lady Bug ink and shape using the coordinating mold. Assemble using two petals the same size. For the centres of the flowers stamp the poppy images in Red Geranium ink on Deluxe Flower Shaping Paper. Colour the centres of the flowers with Leaf Green ink and cut out with scissors. Shape the centres and add to the centres of the flowers with foam squares. Add 3D Crystal Lacquer to the flowers and when dry add Black Flower Pearls to the outside of the flower centres. Add the poppies over the painted images.

Stamp the small poppy images from the HCPC-3986 Wild Poppy Cling Stamp Set in Leaf Green ink on Deluxe Flower Shaping Paper. Colour the leaves with Vivid Chartreuse ink and die cut with the coordinating die. Colour the backs with Vivid Chartreuse ink and shaping using the groove golf tools. Add Crystal Clear to the petals with 3D Crystal Lacquer and when dry add Lettuce Entertain You and adhere around the bottom of the card as shown.

Other Products: Altenew Watercolour Paper, Altenew Artist Watercolours, Dress My Craft Black Flower Pearls

Instructions:

Make a card base using the 5 x 7" Gateway Fold Card.

Use the largest die from the Teardrop Lattice Gateway die set and cut 3 panels, sheet 6A for the middle and back panels and 12B for the front out of the Wild Poppy paper. Adhere to the card base.

Use the 2nd and 4th die from the die set and cut one out of deluxe flower shaping card stock, adhere to the front of the card. Use the large die from the Iron Works sentiment set and cut one out of the wild Poppy paper 6A, cut the words out of white and adhere to the center panel of the card.

Stamp the Wild Poppy flowers on white with the Lady Bug ink, cut out with the coordinating die, ink the inside of the flower lightly with black ink and the edges with more of the Lady bug. Place in the matching mold and run through the die cut machine.

Stamp the Leafy accents on white with the Northern Pine, color in with the Bamboo Leaves, cut out with the coordinating die, ink the edges with more of the Northern Pine ink and place in the matching mold, run through the die cut machine to shape. Adhere the leaves and flowers on the card with hot glue.

To finish add glitter to all the flowers and leaves. Add Recollections Cherry to the center of each flower.

Other Products: Paper trimmer, Die cut machine. Hot glue gun, Recollections Cherry Micro beads,

Instructions:

Create 6” x 6” card base using white cardstock- HCPP1-475 Deluxe Flower Shaping Paper Pack of 50. Now stamp some images from HCPC-3987 Wild Poppy Accents Cling Stamp Set, HCPC-3988 Wild Poppy Bouquet Cling Stamp Set on Deluxe flower Shaping paper using archival ink-jet black and cut them using coordinating die.

Next cut circle die on white cardstock, adhere it using foam tape, add some dry grass. Add sentiment from HCPC-3844, using archival ink-mulberry. Stamp One image from HCPC-Wild Poppy Accents Cling Stamp on white cardstock, cut it with coordinating die and color using archival ink vermillion and leaf green. Adhere as pictured.

Add some gold splatters using gold metallic paint with splatter brush.

Stamp some flower petals from HCPC-3986 Wild Poppy Cling Stamp on Deluxe flower shaping paper-white using archival ink-vermillion and leaf green (small size). Cut them with coordinating die HCD1-7404 Wild Poppy Die, shape them using HCFB1-5011 Wild Poppy Mold. Add stamens- HCS1-457-2 Pastel Pearl Stamens-Medium, HCS1-459-2 Rock Candy Stamens-Small.

Arrange all these embellishments as pictured, sponge the flowers with dries clear adhesive and sprinkle with Crystal Clear glitter.

Other Products: Big-Shot Plus Machine.

Instructions:

The finished card measures 6 x 4 3/4 inches. Cut a piece of deluxe flower shaping paper 6  x 9 1/2 inches and score at 4 3/4 inches to make a side fold card.  Cut differents pieces of paper as follows: 5 3/4 x 4 1/2 inches in red paper #12B from Wild poppy collection, 5 1/4 x 4 1/4 inches in white deluxe flower shaping paper, 5 x 4 inches in pattern paper #4B from Wild poppy collection.

With the Eyelet Circle & Basics small dies, cut a 4 inch circle in pattern paper #9B, a 3 1/2 inch circle in white paper and a 3 inch circle in pattern paper #1A. Distress the edges with a distress tool or the blade of your scissors. Glue them to your card base as shown with 3D foam dot to give dimension.

Stamp your Wild Poppy flowers onto white flower shaping paper. (I made flowers in coastal coral, in carnation red and in tea rose).  Diecut with the coordinating die. Place facedown into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe Flower Shaping kit tools. Glue 2 layers together. In the center of some of the flowers add black prills. 

Stamp in olive green leaves from the Wild poppy accents and the Wild poppy bouquet. Cut with the coordinating dies and take the leaves and color the poppy with the green ink.  

Put cheesecloth and sewing thread on your card and glue your flowers and leaves over. 

Cut 2 times the letters YOU from the Letters and numbers die (one in coral and one in white) and glue the white on the coral slightly offset. Glue it on the center of your card to make the sentiment.

Other Products: Die cutting machine Cut’n’boss, heat gun, water mister, hot glue gun, hot glue, scissors, cheesecloth, sewing thread,

Instructions:

Ready tent fold card measures 7.5" × 5.5". Cut a mat from designer paper collection measuring 7.25" × 5.25", adhere it on ready card base. Cut another mat from designer paper collection measuring 6.75" × 4.75", adhere it on white cardstock measuring 7" × 5". Adhere this mat on card using dimensional tape. 

Cut a decorative oval frame from white cardstock using Simply Classic Oval Frames die and a oval piece from designer paper using die from the same set. Cut 2 decorative corner pieces from white cardstock and 2 from Luxe Gold cardstock using Filigree Companion Frame die. Cut a decorative oval piece from Luxe Gold cardstock and a oval piece using Royal Elegance Frames Die. Stamp sentiment on small oval die cut using vermillion ink. Arrange all diecuts on card as pictured. 

For stamens, take floral wire, glue a pearl using hot glue. Cover it with floral tape. Take a piece of floral tape and twist that to create a thin rope. Arrange it on pearl to create pattern. Now cover it with floral tape. Press slightly to create depth. Paint it using copic markers. Take white floral tape and twist it to create thin rope. cut it into small pieces.  Take Rajni Chawlas's Frosting Powder and add few drops of sunflower reinker to color Frosting Powder. Apply glue on the both ends of floral tape rope pieces and add Frosting Powder on it.  Now tie them with floral Buds which we create earlier. 

For flowers, stamp Wild Poppy flower on deluxe flower shaping paper using rose madder ink and cut with coordinating dies. Paint flowers using tea rose and rose madder. Shape flowers using golf tool. Pierce the center of flower, add stamen and layer flowers in alternate manner and glue them using hot glue. For Buds, stamp small flower using leaf green and cut with coordinating die. Paint with same ink and shape with golf tool. Take a stamen, glue a flower and then cover it with green flower. Stamp leaves from Large Floral Urn, Floral Shoppe Accent Fillers and Wild Aster stamp on deluxe flower shaping paper using leaf green archival and cut with coordinating dies. Paint leaves using same ink and shape using stylus. 

Arrange all the elements on card and adhere them with hot melted glue. For finished look, apply Art Glitter Dries Clear adhesive on flowers and leaves and add Rajni Chawlas's Crystal Clear glitter. 

Other Products: Smooth White Cardstock, Hot Glue, Floral Wire, Floral Tape, Copic Markers, Pearl

Instructions:

Create a 5 x 7" card base with white cardstock. Cut a 4.5 x 6.5" piece of pink paper from the Wild Poppy Paper Collection, distress with Carnation Red and adhere to card front. Cut out the largest Intricate Swirl Frames Die in white cardstock, distress with Carnation Red and adhere. Cut a pink piece of designer paper to fit inside the Intricate Swirl Frames Die, distress with Carnation Red and adhere with foam tape. Use the center rectangle die to cut out a piece of green designer paper and adhere.

Cut out the eyelet oval with the Eyelet Oval & Basics Small Die.

Stamp the vase from the Wild Poppy Bouquet Cling Stamp Set in Jet Black, color with Zig markers and cut out with the Eyelet Oval & Basics Small Die. Adhere to Eyelet Oval with foam tape. Adhere to left side of card front.

Stamp the Wild Poppy Cling Stamp Set in Carnation Red, sponge with same, cut out with coordinating dies, sculpt with the Wild Poppy Shaping Mold. Stamp the center of the poppy with Olive and cut out, sponge with Buttercup. Add black prills to the flower center, adhere flower center circle with foam tape as shown, add glitter.

Stamp the buds from the Wild Poppy Accents Cling Stamp Set in Olive, sponge with Vivid Chartreuse, cut out with coordinating dies and sculpt with a stylus and add glitter.

Stamp sentiment from the Cheerful Notes Sentiments Cling Stamp Set on designer paper and cut out with Cut Mat Create 1B Die.

Adhere flowers and sentiment as shown in photo.

Other Products: White cardstock, die cutting machine, Intricate Frames Swirl Die (Retired)

Instructions:

Cut out the white base of the card and fold it to 7" x 7". From the paper collection, cut a 6.75" x 6.75" square and adhere to the base. Then cut a square of white paper 6.50" x 6.50", from the paper collection, cut a square 6.25" x 6.25". Cut a 6" x 6" square from the white paper and a 5.75 "x 5.75" square from the paper collection. Adhere as shown with Double Dots 100pc. -3D Foam Circles.

From white paper, cut out the largest frame from the Large Floral Butterfly Die set. Glue to the card in the center. Stamp with green ink butterfly from the Large Floral Butterfly Cling Stamp Set on paper from the collection. Then cut with the coordinating die. From white paper, cut out an openwork butterfly. Glue everything as shown. Form the wings of the butterfly with a round pencil, for example, so that they go up.

Stamp Wild Poppy flowers on white paper using red ink and cut with coordinating die. Color with the same ink. Shape using flower shaping mold. Stamp leaves from the Wild poppy Accents kits on green paper from the collection using green ink and cut with coordinating die. Layer flowers and create 3D Wild Poppy. Add black and green stamens to the center of the flowers. Glue with hot glue.

With black ink on a white strip, stamp the sentiment. Glue it to the card.

Other Products: Die-cutting machine, paper cutting trimmer, hot glue

Instructions:

Card size is 4 1/4 x 5 1/2”. Score and fold 8 1/2 x 5 1/2” Black cardstock at 4 1/4” on the long side to create card base. Cut Wild Poppy Paper Collection Sheet 12B to 4 1/8 x 5 3/8” and ink the edges with Distress Oxide Black Soot ink. Cut the A2 card front from the paper collection sheet 9A, ink the edges and using the 2.5” x 3.5” rectangular die from the Cut Mat Create 1B Die set, cut the center from the two designer papers and the card front. Ink inside the rectangle after diecutting and adhere the two designer papers together using dries clear adhesive then adhere to the card front using dimensional squares.

Cut sheet 11B to 4 1/8 x 5 3/8”, ink the edges and adhere to the inside of the card. Stamp the sentiment ‘You are so thoughtful” from the Just For You Sentiments Cling Stamp set on the rectangle cut from the designer paper using Memento Tuxedo Black ink. Ink the edges and, lining up inside the card front aperture, adhere to the inside with dries clear adhesive. Add a little Crystal Ultrafine Transparent Glitter to the design on the rectangle.

Stamp the image from the Wild Poppy Bouquet Cling Stamp on white cardstock using Memento Tuxedo Black ink 2x. Color one image completely using Stampin Blend markers Real Red Light and Dark and Granny Apple Green Light and Dark. Just color the flower on the second image. Diecut the full image on one and just the flower on the other using the coordinating dies, diecut again from white cardstock, adhere behind the stamped images for strength and lightly shape using the Deluxe Flower Shaping tools. Spray the images with Sheer Shimmer Craft Spray – Sparkle. Adhere the second flower on the full image using hot glue. Adhere to the card front over the aperture using dries clear adhesive.

Stamp the sentiment ‘thank you’ from the Thank You Sentiments Cling Stamp set on white cardstock using Memento Tuxedo Black ink, fussy cut with scissors, ink the edges and adhere to the bottom of the card front.

Other Products: White Cardstock, Black Cardstock, Misti, Distress Oxide Black Soot Ink, Hot Glue Gun, Dimensional Squares, Sheer Shimmer Craft Spray – Sparkle, Funnel Tray, Stampin Blend Markers – Real Red Light and Dark, Granny Apple Green Light and Dark, Scissor

Instructions:

Cut a patterned paper from the collection just slightly smaller than 7” x 5.5” card base and adhere to the card base Die cut 2 of the middle die from the majestic swirl frame die set using green card, and adhere to the back of opposite corners of a 5.5” x 4.25” piece of white card, allowing the decorative edge to show on 2 sides. Adhere to the centre of the card base.

Select a 5.25” x 4” summertime panel from the paper collection and adhere to the white card. Stamp the sentiment using granny apple green ink onto a paper from the collection and position as shown. Die cut the largest 2 eyelet circles, one inside the other to create a frame, from the Decorative circle frames and place this around the scene.

Stamp the cottage onto the stamping card using the black memento ink and colour using the kuretake zig watercolour markers, die cut. Add to the card base using foam pads. Stamp the tree onto white card using the rich coca ink and colour using toffee crunch, cut off the bottom of the truck and adhere behind the cottage.

Stamp the leaves onto flower shaping paper using cottage ivy ink, colour using the granny apple green, die cut and shape. Add the tree using hot glue. Add a little dries clear adhesive to the leaves and sprinkle with green glitter.

Stamp the grass using cottage ivy ink colour with granny apple green and die cut. Adhere to the bottom edge of the cottage.

Stamp the flower tubs using rich cocoa ink and colour the flowers, die cut and colour the tubs using the rich coca and toffee crunch inks. Shape and adhere to the card using hot glue.

Other Products: 7" x 5.5" side fold card base, stamping card, granny apple card and ink, green glitter, hot glue, foam pads

Instructions:

Make a card base from white card stock. Cut white card stock in two pieces, 5” x 7” and 5” x 7 1/2". Score the bigger piece at 1/2" on the longer side. Fold the flap and adhere the second piece with clear glue to get a top folding vertical card base.

Using the Fancy classic Rectangle frame die, Cut out the mat layer from the outer most plain mat layer die using background paper from the paper collection. Adhere this piece on the card front. Cut two pieces of die cut, in Luxe silver card stock and white card stock using the outer decorative frame. Adhere the silver die cut on the white die cut and adhere the whole piece on the mat layer. Using another colour background paper, cut out the inner piece for the frame and adhere this piece inside the frame.Cut two pieces of white die cuts using the inner decorative frame and adhere inside the frame.

To make the Rose flowers, Stamp the Classic Rose flower images with Pink Peony Archival ink on Deluxe flower Shaping paper. Colour the flower images with a blend of pink peony and green ink. Cut with matching die. Use two big and three medium size flowers to make one rose. Shape and mold the die cuts in the Deluxe flower shaping kit. Follow the video to see how to assemble the rose.

Stamp the leaves with Leaf green ink on Deluxe flower shaping paper. Colour the leaves using the same colour and pnk peony with daubers. Cut the leaves with matching die and shape them with the Deluxe flower shaping tool kit. Make filler flowers using the smallest image and green ink.

Stamp the butterfly image on vellum paper with white pigment ink. Add white embossing powder and heat set. Cut with matching die.

Stamp the just for you sentiment with Magenta hue ink on Deluxe flower shaping paper. Cut with coordinating die and add a silver die cut from the same die set.

Add the sentiment die cut on the card front. Add the roses and leaves using hot glue. Add the butterflies to finish the card.

Other Products: scoring board, die cutting machine, hot glue gun, white card stock, clear embossing powder.

Instructions:

The card base is white cardstock 5 x 7". Cut the dark pink patterned paper to 5 x 7". Cut the plaid patterned paper to 4.75 x 6.75" and adhere to the dark pink patterned paper using white photo corners. Cut the teal patterned paper to 4 x 6" and adhere to the plaid layer. This can all be adhered to the card base.

Die cut the largest Regal Frame from white cardstock. Cut the middle section out from both white cardstock and Luxe Gold Cardstock. Adhere the 2 middle pieces together slightly off-set so that you can see a peek of gold in behind. Adhere to the larger die piece using foam tape. Adhere the whole piece to the card base. Die cut the 2 smallest die pieces from white cardstock for the sentiment, that is stamped using dark brown ink (Staz On- Timber Brown) and the Thank You Sentiments set. The next decorative die image from Luxe Gold Cardstock. Pop-up both of these pieces to the right of the card using foam tape.

Stamp and die cut 1 of the Wisteria branches using dark brown ink onto white cardstock. Stamp and die cut 2 small and 1 medium set of the Sweet Pea flower images onto Deluxe Flower Shaping Paper, using dark brown ink. Add color to the flowers using pink ink (Stampin Up- Regal Rose) and daubers. Shape them using the coordinating 3D Shaping Mold. Assemble the flowers and add around the card with small pieces of cheesecloth under each. Add color to the branch using a Zig Clean Color Marker and waterbrush for the branch (Oatmeal) and green ink (Stampin Up- Old Olive) and daubers for the leaves. Shape the leaves using the Deluxe Flower Shaping Kit. Add to the right hand side of the card.

Add a few gems around the decorative die for a little extra sparkle.

Other Products: Cardstock- White, Waterbrush, Cheesecloth, Gems, Stampin Up Ink (Old Olive, Regal Rose), Scrapbook Adhesives by 3L (Crafty Foam Tape, Creative Photo Corners White, Adhesive Dots Micro, Adhesive Dots Medium, E-Z Runner Ultra)

Instructions:

Fold white cardstock to 6 x 5.5" with fold on the top then use the outline die from the Simply Classic Oval Frame Die to cut, leaving the top of the die over-hanging fold by about 1". Use the same die and cut out the full front from the Wild Poppy Paper Collection. Cut out 2 white doilies from the same die set. Cut out two ovals with the oval dies from the Wild Poppy Paper Collection. Use dimensional adhesive and glue all elements. Stamp the sentiment in Vibrant Fuchsia ink using Celebrate Love Sentiments stamp and cut it out.

Stamp blossoms from the Wild Poppy Cling Stamp Set in Magenta Hue ink onto Deluxe Flower Shaping Paper, color their edges with the same ink and their centers with the Leaf Green ink, diecut with coordinating die and shape with mold. Add Power Outage prills and Ribbit prills to all flowers. Stamp blossoms from Cottage Garden Hydrangea Cling Stamp Set in Magenta Hue and French Ultramarine inks onto Deluxe Flower Shaping paper, color them with the same inks and diecut with coordinating dies. Shape them with Deluxe Flower Shaping Kit tools. Put some prills in the center of the flowers.

Stamp 2 branches from Leafy Accents Cling Stamp Set in Leaf Green ink, color them, cut out with coordinating die and shape with coordinating mold. Stamp 3 branches from the Wild Poppy Accents Cling Stamp Set in Tuxedo Black ink, color them with colored pencils and diecut with coordinating die.

Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, sisal, colored pencils, self-adhesive pearls

Instructions:

Create a 5 11/16" square base from white cardstock. Cut a piece of green paper from Wild Poppy Paper Collection to 5.5 x 5.5". Cut a piece of green paper from Wild Poppy Paper Collection to 4 x 5 1/8" and a little bigger piece of the white cardstock. Cut out a white frame from the Rounded Window Frame Die and another white frame from the Filigree Companion Frame Die. Adhere all elements to the base. Stamp the sentiment in Fern Green ink using Celebrate Love Sentiments stamp and cut it out.

Stamp blossoms from the Wild Poppy Cling Stamp Set in French Ultramarine ink onto Deluxe Flower Shaping Paper, color their edges with the same ink and their centers with the Leaf Green ink, diecut with coordinating die and shape with mold. Add Power Outage prills and Ribbit prills to all flowers. Stamp 4 the smallest flowers from the Wild Poppy Cling Stamp Set in Leaf Green ink onto Deluxe Flower Shaping Paper, color them with the same ink, diecut with coordinating die and shape with mold.

Stamp blossoms from Lush Lilac Cling Stamp Set in Magenta Hue ink onto Deluxe Flower Shaping paper, color them with the same ink and diecut with coordinating dies. Shape them with Delux Flower Shaping Kit tools. Put some prills in the center of the flowers. Stamp 2 branches from Leafy Accents Cling Stamp Set in Leaf Green ink, color them, cut out with coordinating die and shape with coordinating mold.

Stamp 3 branches from the Wild Poppy Accents Cling Stamp Set and the vase from the Wild Poppy Bouquet Cling Stamp Set in Tuxedo Black ink, color them with colored pencils and diecut with coordinating die.

Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, sisal, colored pencils, self-adhesive pearls