Instructions:

Cut Deluxe Flower Shaping Paper to 6 x 12”. Score and fold at 3 and 9”. Cut 6 x 6" panel from sheet 10A, ink edges with Rose Madder ink along with a dauber, and adhere on inside of card base. Using the plain rectangle die from HCD1-7397 French Gate Die, diecut two rectangles from sheet 10B. Adhere one on the outside of each flap. Diecut both of the intricate French Gate pieces from Deluxe Flower Shaping paper. Apply Dries Clear glue onto a sponge and randomly sponge glue onto French Gate intricate pieces. Sprinkle with Rajni Chawla’s Crystal Clear glitter. Adhere onto purple rectangle panels on card front.

Stamp the following images onto Deluxe Flower Shaping Paper. Stamp an assortment of roses from HCPC-3752 Classic Rose stamp set using Pink Peony ink. Stamp a few smaller roses from same stamp set using Leaf Green ink to work as small filler flowers. Stamp the Leaf from same stamp set using Library Green ink as well as a few leaves from the HCPC-3835 Leafy Accents stamp set. Stamp Clematis flowers using Rose Madder ink. Diecut all using coordinating dies.

Color the images using the Stack and Store dauber along with the following inks. For the roses and clematis flowers use both Pink Peony and Plum inks add a soft splash of Buttercup ink in center of clematis. Color the leaves with Vivid Chartreuse and Leaf Green inks adding a splash of Plum along a few of the edges. Add Vivid Chartreuse in the center of the small green filler flowers.

Shape flowers and leaves using their coordinating molds. There is a great video on how to create the roses, be sure to watch that as well. Use hot Glue to assemble the roses. Use Dries Clear Adhesive for the clematis flowers and small green roses, pierce the center and add your stamens. On the clematis flowers add some Dries Clear Adhesive around the stamen and add Go Man Go and Lettuce Entertain You Prills as an accent.

Arrange Flowers and leaves as shown, add some Dries Clear glue onto leaves and flowers, adding Crystal Glitter for sparkle. Use scissors to fussy cut the pink banner from sheet 3A, stamp Just For You sentiment in Vermillion ink. Adhere sentiment using foam adhesive.

Other Products: Hot Glue, Scissors, Foam Adhesive Paper Trimmer, Die cutting machine, Archival Library Green Ink

Instructions:

Cut Deluxe Flower Shaping paper to 5 1/2 x 8 1/2”. Score and fold at 4 1/4”. Cut panel of sheet 3B of paper panel to 5 3/8 x 4 1/8”, use dauber to apply Rose Madder ink along edge and adhere onto card front. Diecut large intricate square from HCD1-7398 French Courtyard die from Deluxe Flower Shaping Paper. Repeat this using the same die, this time using Luxe Gold cardstock. Use paper trimmer to cut apart two opposite corners as you’ll be using these individually. Repeat this for the gold piece as well. Apply Dries Clear Adhesive onto Hydra Sponge, dab randomly over white corner dies, sprinkle with Rajni Chawla’s Crystal Clear. Adhere gold piece behind white piece to create a golden shadow. Adhere both corners onto the bottom of card base, you’ll need to overlap the centers for it to fit on the card front. From same die set, use the large and small plain circles to die cut a circle frame from sheet 10B of paper collection. Adhere onto card base as shown. Use same two circles, this time adding the Birthday sentiment die in the center. Diecut this combination on Deluxe Flower Shaping paper. Repeat this same step, this time diecutting onto Luxe Gold cardstock. Apply Dries Clear Adhesive onto Hydra Sponge, dab randomly over white birthday sentiment circle. Adhere gold sentiment circle behind white glittered sentiment circle, creating a golden shadow. Adhere onto purple circle using foam adhesive, you may need to cut the foam into smaller pieces.

Stamp the following images onto Deluxe Flower Shaping Paper. Stamp a few roses from HCPC-3752 Classic Rose stamp set using Rose Madder ink. Stamp three smaller roses from same stamp set using Leaf Green ink to work as small filler flowers. Stamp the Leaf from same stamp set using Library Green ink as well as a few leaves from the HCPC-3835 Leafy Accents stamp set. Stamp two Clematis flowers using Rose Madder ink. Diecut all using coordinating dies.

Color the images using the Stack and Store dauber along with the following inks. For the roses and clematis flowers use both Pink Peony and Plum inks add a soft splash of Buttercup ink in center of clematis. Color the leaves with Vivid Chartreuse and Leaf Green inks. Add Vivid Chartreuse in the center of the small green filler flowers.

Shape flowers and leaves using their coordinating molds. There is a great video on how to create roses, be sure to watch that as well. Use hot glue to assemble the roses. Use Dries Clear Adhesive for the clematis flower and small green roses, pierce the center and add your stamens. On the clematis flower add some Dries Clear Adhesive around the stamen and add Go Man Go and Lettuce Entertain You Prills as an accent.

Arrange flowers and leaves as shown, add some Dries Clear glue onto leaves and flowers, adding Crystal Glitter for sparkle.

Other Products: Hot Glue, Foam Adhesive, Paper Trimmer, Die cutting machine, Archival ink Library Green

Instructions:

Ready tent fold card measures 8.5" × 4". Cut a mat from designer paper collection measuring 8.25" × 3.75", adhere on ready card base. Cut another mat from designer paper measuring 7.75" × 3.25", adhere on white cardstock of same size. Cut an eyelet square from white cardstock using Stairway Gardens Die. Trim diecut and arrange it from the back side of second mat, so the eyelet can ve visible. Adhere second mat on card using dimensional tape.

Other Products: Smooth White Cardstock, Hot Glue, Satin Cord

Instructions:

Other Products: Smooth White Cardstock, Shaker Elements, Satin Cord

Instructions:

Prepare a white 5 x 7” card base with the Flower Shaping card stock. Layer with a piece of Decorative Dragonfly paper sheet 1B trimmed slightly smaller on top.

Cut out 3 of the French Gate side panels from white card stock, glue those together making the panel stronger.  Lay a piece of the Decorative Dragonfly paper on top, add foam strips to the back and adhere to the card.

Stamp the Wild Asters on white card stock with the Cactus flower ink, color the center with the Magenta Hue and the edges with Rose Madder. Cut out with the coordinating die. Shape using the Flower Shaping tools, put 3 together making one flower and adhere to the card as shown.

Stamp the leaves on white card stock with the Emerald Green ink, color with Bamboo Leaves. Cut out with the coordinating die. Shape using the Flower Shaping tools and adhere slightly under the 3 flowers.

To finish, add glitter to all the flowers and leaves. Add Minnie Pearls Prills in the center of the flowers with hot glue.

Other Products: Paper trimmer, Die cut machine, Hot glue gun,

Instructions:

Click HERE to view the video tutorial for this card.

Score a 7" x 8 1/2" piece of Deluxe Flower Shaping paper at 3 1/2" to make a 3 1/2" x 8 1/2" slimline card base. Die cut a piece of Deluxe Flower Shaping Paper using the die from Classic Companion Border die and adhere it on a slightly bigger piece of pattern paper cut from (Sheet 9B) Sweet Pea paper collection. Adhere this piece on the card base using foam tape.

Ink a sheet of art foam paper on both sides with Cactus flower and Manganese blue archival inks and stamp the petals from Sweet Pea cling stamp set on it using the same ink. Ink a sheet of art foam paper on both sides with Sunflower and Leaf Green archival inks and stamp the leaves and calyx from the same stamp set on it using Olive archival ink. Ink a sheet of art foam paper on both sides with Sunflower archival ink and stamp the calyx on it using Monarch Orange archival ink. Die cut all the images using the matching dies from Sweet Pea die. Add a yellow stamen from Bright pearl stamens to the yellow flower centers.

Shape the flowers, leaves, calyx and buds using iron, hydra sponge, 3D Sweet Pea shaping mold and Deluxe Flower shaping kit. Stamp the images from Vining Sweet Pea cling stamp set on a piece of Deluxe flower shaping paper using Leaf Green Archival ink and ink them with the same ink. Die cut them using the matching dies from Vining Sweet Pea die. Cut off the flowers and shape the leaves using Deluxe flower shaping kit. Glue this along with the flowers, leaves and buds on the card front as shown. Add a few tendrils from the Vining Sweet Pea image to finish the card.

Other Products: Iron and hot glue gun

Instructions:

Cut a piece of white cardstock 8 x 8 1/4", score at 4" and fold to get a base. Cut a piece of patterned paper from the Decorative Dragonfly Paper Collection to 3 13/16 x 8 1/16", another one to 3.5 x 7.5" and a little bigger piece of white cardstock. Adhere them to the base. Cut out a pink panel from the Decorative Dragonfly Paper Collection with the outline die from the French Gate Die set. Cut out two ornamental diecuts from the white and silver cardstock with the French Gate Dies. Cut out 2 white and 2 silver ornaments with dies No. 4 and No. 5. from the French Courtyard Die set. Adhere all elements to the base using glue and adhesive tape. Cut 2 pieces of patterned paper from the Decorative Dragonfly Paper Collection to 3 13/16 x 8 1/16". Cut out a sentiment from the white and a silver cardstock with dies No. 2, No. 3 and No. 4 from the French Courtyard Die set. Adhere them inside of the base.

Stamp blossoms from Sweet Pea Cling Stamp Set in Cactus Flower ink onto Deluxe Flower Shaping paper, color them with the Cactus Flower and Leaf Green inks. Then diecut with coordinating die and shape with coordinating mold. Add some Rock Candy Small Stamens to the centers of flowers. Stamp blossoms from Cottage Garden Hydrangea Stamp Set in Summer Sky ink onto Deluxe Flower Shaping paper and diecut with coordinating die. Shape them with Deluxe Flower Shaping tools and add some Ribbit Prills. Stamp 3 branches from Leafy Accents Cling Stamp Set in Leaf Green ink, color them, cut out with coordinating die and shape with coordinating mold. Stamp 2 branches from Vining Sweet Pea Cling Stamp Set in Fern Green ink, color them, cut out with coordinating die. Stamp 3 small Dragonflies from the Decorative Dragonfly Stamp Set in Tuxedo Black, color them with inks and promarkers and diecut with coordinating dies.

Use dimensional adhesive and hot glue to attach all elements onto card as pictured. To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers and dragonflies.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, sisal

Instructions:

This tent fold card measures  6“ x 6“ when completed. Taking the white card stock make a card base 6“ x 6“. Find the sheet 1B in the collection paper pad and cut this a little smaller than the card front. Adhere in place.

Taking the silver card stock, the 3D foam card stock and the French Courtyard die, cut using the frame as seen excluding the circles in the centre of the die set. Adhere together then adhere to the card front. Taking the Decorative Circle Frames die set, chose the eyelet circle that fits in the circle of the silver frame. Adhere this in place using the 3D double sided foam tape or dots.

To make the flowers: Stamp using the library green ink onto white card stock three flower images from the Dragonfly Florals set, enough to make three wild roses from the Small Wild Rose set, four leaves from the Sweet Magnolia Blooms set. Stamp also a dragonfly from the Decorative Dragonfly set.

The colours used  for the dragonfly are Fern Green, Forget-Me-Not ,Cactus Flower. For the leaves use the Fern Green. For the wild roses and the three flowers from the Dragonfly Florals set, use the Cactus Flower and the Venetian Orange inks. Use the daubers to bring the colour onto the elements. Use the matching molds to bring shape to the flowers and the leaves. Use also the shaping tools for extra help. Adhere the flowers together using the hot glue gun. Adhere the flowers, leaves and dragonfly in place.

Make the sentiment by stamping it with the Library Green ink onto white card stock banner. Fussy cut the points at one end, ink the edges with the inks then adhere in place with the hot glue gun. Adhere also the triple pre-made organza ribbon bow to under the flowers. To finish the card, apply diamond stickles to the flower centres and the dragonfly.

Other Products: Ranger Archival ink-Venetian Orange, Library Green, Diamond stickles, Ruler, Fussy cutting scissors, 3D Foam card stock-white, Hot glue gun, Misti stamping tool, Organza Ribbon, Double sided tape, Doubles sided 3D foam tape.

Instructions:

The purple patterned paper is the background. Cut a strip of the dark purple check pattern that is 2.5 x 12" and mat it in white cardstock. Adhere across the middle of the layout. Die cut the French Courtyard die from white cardstock, and mat that in a larger piece of light pink patterned paper. Adhere these 2 layers together using foam squares, and then adhere to the layout using foam tape. Mat the 4 x 4" layout in white cardstock and adhere to the middle of the decorative frame. Add pearls around the decorative frame. 

Find and cut out the mini journal block and adhere below the framed photo using foam squares. Die cut out the title using the Letters & Numbers die from white cardstock and adhere to the mini journal black using a glue pen. 

Stamp and die cut a total of 5 dragonflies using an embossing pad and white embossing powder onto white cardstock. Add color to the dragonflies using Zig Clean Color Markers and a waterbrush (Light Carmine, Light Violet, Violet).

Add the dragonflies diagonally across the layout using foam squares. Add a mixture of pearls and gems around the dragonflies for a little extra sparkle.

Other Products: Cardstock- White, Pearls, gems, Stickles, Waterbrush, Scrapbook Adhesives by 3L (Crafty Foam Tape, E-Z Runner Ultra, Dual Tip Glue Pen, 3D Foam Squares)

Instructions:

The finished card measure 6 3/8 x 3 3/8 inches. Cut the card base in a white card stock 7 1/2 inches by 6 3/4 inches and fold it in two to make a side folding card. Fold a 1 1/8 strip of paper across the bottom of the inside of card and fold it inward. Cut the right part and glue both sides of the left part to make a pocket. Cut a 6 1/8 x 3 1/8 piece of pink paper from Decorative Dragonfly Collection and glue it to the card base. In white cardstock, cut piece from the French Gate die and glue it on the base. Die cut in white deluxe paper a die from the same kit.  Put glue on it add crystal clear to make it shine. Glue on your card front.

Glue inside the card 2 strips of pink paper cut with the 6x3 die from the French gate die (ink the edge with pink ink before). Inside the card also glue a die cut from white paper who come from the French gate die and 2 Ornamental Tag die cuts from pink paper. 

Stamp two flowers from the Wild Roses collection with pink peony ink onto white flower shaping paper, color the center with buttercup ink and shade the edge with pink. Diecut with the coordinating die. Place facedown into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe flower shaping kit tools. Poke a hole in the centre of the flowers and add stamens. Use 3 petals per flowers.  With clear glue, add Crystal clear glitter on your flowers.

Make three leaves with the Wild Rose collection in leaf green. Colour the centre with the same color and diecut with the coordinating die. Place facedown into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe flower shaping kit tools.

Put cheesecloth and sewing thread on your card base. Glue your flowers and leaves on it. For the final touch, add half pearls on your card.

Other Products: Die cutting machine Cut’n’boss, heat gun, water mister, hot glue gun, hot glue, scissors, cheesecloth, sewing thread, half pearls, Stamp mat dad

Instructions:

The finished card measures 6 3/4  x 3 1/2 inches. Cut the card base in a white card stock 8 1/2 inches by 6 3/4 inches and fold at 3 1/2 and again at 7 inches fold at the 3 1/2 score line to make a top folding card. Fold up the 1 1/2 inch pocket. 

Cut a 6 1/8 x 3 1/8 piece of pink paper from Decorative Dragonfly Collection and glue it to the card front. In white cardstock, cut piece from the french gate die and glue it on the card base. Die cut in white deluxe paper using adie from the same kit.  Put glue on it add crystal clear glitter to make it shine. Glue on your card.

Glue inside the card 2 strips of pink paper cut with the 5 7/8  x 3 die from the French gate die (ink the edge with pink ink before). Add glue to the sides of the pocket to close. Inside the card also glue a die cut from white paper from the French Gate die. Also add a piece of pink paper cut with the majestic swirl frame. Make a sentiment with the Letters and Numbers dies cut 3 times in pink paper and glue on each other. 

Stamp one big flower from the Wild Roses collection with pink peony ink onto white flower shaping paper, color the center with buttercup ink and shade the edge with pink. Diecut with the coordinating die. Place facedown into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe flower shaping kit tools. Poke a hole in the centre of the flowers and add stamens. Use 3 petals for the flower. With clear glue, add Crystal clear glitter on your flower.

Stamp one small flower with the french cottage scape stamp with pink peony onto white flower shaping paper. Diecut with the coordinating die. Poke a hole in the centre of the flowers and add stamens. Use 2 petals for the flower. With clear glue, add Crystal clear glitter on your flower.

Make three leaves with the wild roses collection in leaf green. Colour the centre with the same color and diecut with the coordinate die. Place facedown into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe flower shaping kit tools. 

Put cheesecloth and sewing thread on your card base. Glue your flowers and leaves on it. For the final touch, add half pearls on your card.

Other Products: Die cutting machine Cut’n’boss, heat gun, water mister, hot glue gun, hot glue, scissors, cheesecloth, sewing thread, half pearls,

Instructions:

The ready side fold card measures, 7″ x 7″. Choose the pattern paper from the paper collection and create 2 layers, making the white border all around by 1/16″. Cut one each die-cut from white cardstock and Luxe Gold cardstock using Rounded Window Frame Die and mat them together keeping the gold one at the back as shown. 

Cut the tag using Album Tags and Accents Die set from Decorative Dragonfly Paper Collection and mat a golden fancy tag behind it. Adhere a white die cut with the sentiment using Ornamental Tags Die on top. Layer the prepared tag on the rounded window frame using double-sided tapes. 

Stamp the florals with Majestic Violet on flower-making paper using Clematis Cling Stamp Set. Cut the florals using its coordinating die set and color the flowers using Magenta Hue and highlight them using Majestic Violet Archival inks. Spritz water and shape the flowers using golf groove tools. Prepare 1 large flower of 2 petals and 2 medium-sized flowers, 2 petals each. Add flower center pearls to the medium-sized flowers, using glossy accent.

Cascading Wisterias are first stamped with Cactus Flower Archival ink, cut with its coordinating die, and then colored using the same ink. Once all colored these are shaped using Deluxe Flower Shaping Kit and add glitter balls to the centers. 

For foliage, Stamp the images from Leafy Accent stamp set with Olive green archival ink and paint them using Leaf green Archival ink. Cut the foliage using its coordinating die. Shape the leaves using a groove golf tool.

 Once all the elements are ready, assemble the card as shown. 

Other Products: Die Cutting Machine, Score Board, Bone Folder, Smooth White Cardstock, Scissors, Glossy Accent. Flower Center Pearls.

Card size: 6” x 6”. Make a card base with white 12 x 6” cardstock. Score at 3” and 9” then use a bone folder to get a nice fold. Cut purple and turquoise blended decorative paper as follows: Two-6 x 3” (for the front), two-5 3/4" x 2 3/4" for the inside, one-5 3/4" x 5 3/4" purple gingham and one-5 x 5” square for the inside center. Glue all panels onto card base, the inside has a slight white border around each decorative layer.Finish the inside of card by cutting a 3” gingham circle for the center, stamp Amazing Day using Deep Purple on white then cut with a 2 3/8” circle. Also stamp, die cut and color the smallest dragonfly to embellish sentiment. Randomly glitter the inside of card and dragonfly.

For the outside “gate”: Cut decorative gate with the French Gate die twice from silver (there are 2 different outer dies so be sure to use the same size for both halves of front). Also cut from silver a circle 2 1/2" and a circle 2 3/8” from gingham. Glue the two gate fronts onto card, glue the 2 circles together but do not glue to card, pop it up attaching to left side only.

Stamp a small size dragonfly, once on white cardstock and once on vellum. Color the dragonflies with the Zig markers (vellum from underneath). Glue together then glue onto center outside circle (leave wings free).

Stamp Magnolias using Cactus Flower, Deep Purple and Paradise Teal, die cut, sponge edges then shape in the mold (see video). Stamp Wild Rose flowers with the same colors following the same instructions for Magnolias. Stamp the leaves using Garden Patina and Leaf Green, die cut, sponge with like colors then shape in the Leafy Accents mold.

Use 2 blossoms for each flower, finish shaping (centers mostly) with the Deluxe Flower Shaping Kit, glue flowers together with hot glue, pierce centers of Magnolias and insert stamen. Add glue to the centers of Wild Roses and sprinkle with Prills to fill centers. Cut leaves apart in 1, 2 and 3 leaf sections.

Close the front and use something to weight it down to stay closed while arranging flowers and leaves. You want some to over-hang right side of circle just a bit so that it keeps the card closed. Be careful not to overhang too much making it hard to open and close. (Each time you close the card just untuck those flower petals so that they are on top of the circle).

Finish decorating the front with leaves and flowers, make sure you can open and close again without too much difficulty then glitter all the flowers, try to avoid glue on the silver paper.

Other Products: White cardstock, glue gun, small flower punch for sepals of buds.

Instructions:

Create base. Measure outside die and cut out to the size, cut one piece from paper collection and glue it on the base. Using French Courtyard Die cut two pieces from gold cardstock and paper collection paper, glue it together, make sure to offset them and place into card using Foam Strips for dimension. Sentiment cut out from gold cardstock and place into card using Foam Strips.

To create Clematis flowers, stamp Clematis Cling Stamp on white paper with Ranger Archival Ink Pad - Majestic Violet and cut using the coordinating dies. You will need 2 petals of each to create flowers for bigger flower use the biggest stamp, for smaller flower use smaller size stamp. Colour the flower with Ranger Archival Ink Pad - Majestic Violet using a sponge dauber. After colouring, place the flowers into the mold and run through cutting/embossing machine. Pierce the center and glue in some stamens using hot glue gun. Add a little hot glue to the underside of the flower. Add dries clear adhesive around flower stamen and sprinkle Ribbit Prills. Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Stamp the leaves using the Clematis Cling Stamp on the white paper with Ranger Archival Ink Pad - Leaf Green, cut out with the coordinating die, shade use this same ink and shape. Shape leaves using mold. Sponge the leaves with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine,

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 12” x 6”, score at 3” and 9” along the long side and fold to create a 6” x 6” gatefold card.

Front of Card: Cut two pieces of green pattern paper 3” x 6” and adhere to both front panels. Die cut two rectangles of a 6” x 6” panel from the pattern paper using the inside rectangle die from the HCD1-7397 French Gate Die. Die cut two decorative dies using the inside rectangle die and the two decorative dies out of Deluxe Flower Shaping Paper. Adhere the two decorative dies to the pattern paper panels and then adhere to the two front panels.

Stamp the flower images from the HCPC-3984 Daydream Florals Cling Stamp Set and the HCPC-3985 Dragonfly Florals Cling Stamp Set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Real Brush Markers and die cut with the coordinating dies. Add Crystal Ultrafine glitter to the flowers with Dries Clear glue and adhere the larger flower images to the left and right panels as shown.

Stamp the dragonfly images from the HCPC-3983 Decorative Dragonfly Cling Stamp Set in Jet Black ink on Iris cardstock. Colour the images with Zig Clean Colour Real Brush Markers and die cut with the coordinating dies. Add Crystal Ultrafine glitter to the wings and then add the larger dragonfly to the top left panel, and the small dragonflies to the right panel as shown.

Die cut the inner and outer hinge out of Deluxe Flower Shaping Paper using the dies from the HCD1-7285 Window Hinges Die. Adhere the inner die to the outer die. Adhere a magnet to the right side on the back of the hinge. Die cut another outer hinge and adhere to the back of the hinge to cover the magnet. Adhere the hinge to the left panel as shown.

To finish the front of the card, add iridescent gems to the dragonfly bodies and to the decorative dies and hinge as shown.

Inside sides of the card: Adhere a magnet on the inside right panel to line up with the magnet on the front of the card. Cut two pieces of green pattern paper 6” x 3 7/8” and adhere to the inside panels and covering the magnet on the right inside panel.

Inside back of card: Cut a piece of green pattern paper 6” x 5 7/8” and adhere to the inside back. Trim a 6” x 6” panel to 5 7/8” x 5 3/4” and adhere to the green pattern paper. Die cut the outer birthday sentiment frame using the die from the HCD2-7351 Ironworks Sentiments Die. Die cut two birthday sentiments - one out of green pattern paper and one out of Deluxe Flower Shaping Paper. Adhere the green sentiment to the white sentiment and then adhere to the vellum back and then adhere the sentiment to the inside back of the card.

Other Products: Iris cardstock, iridescent gems

Instructions:

Create a 5 x 7 inch card base with white cardstock. Cut a 4.5 x 6.5 inch piece of teal paper from the Decorative Dragonfly Paper Collection, distress with Paradise Teal. Cut the largest frame die from the Simply Classic Rectangle Frame Die in pink paper, distress with Vibrant Violet and adhere with foam tape. Cut the next decorative die from this set in white card stock and adhere. Cut the inner decorative die in white card stock and adhere. Stamp the sentiment from the Thank You Sentiments Cling Stamp Set on the center die, distress with Vibrant Violet and adhere with foam tape.

Stamp the Sweet Magnolia from the Sweet Magnolia Cling Stamp Set in Vibrant Violet, sponge with the Cactus Green and Vibrant Violet, cut out with coordinating dies, sculpt with the 3D Magnolia Shaping Mold and add stamens and glitter.

Stamp the leaves from the Leafy Accents Cling Stamp Set in Olive, sponge with the Cactus Flower and Olive, cut out with coordinating dies and sculpt with the 3D Leafy Accents Shaping Mold.

Stamp the flowers from the Daydream Florals Cling Stamp Set and dragonflies from the Decorative Dragonfly Cling Stamp Set in Jet Black, cut out with coordinating dies and color with Zig Markers, sculpt with a stylus and add glitter. Add Glossy Accents to the dragonflies.

Adhere flowers, leaves and images as shown.

Other Products: White cardstock, foam tape, Stazon Ink Pad - Cactus Green, Glossy Accents

Instructions:

Card size is 5 1/2 x 4 1/4”. Score and fold white cardstock 8 1/2 x 5 1/2” at 4 1/4” to create top fold card base. Cut Luxe Silver Cardstock x2 - 5 3/8 x 4 1/8” and cut Decorative Dragonfly Paper Collection sheet 3A x2 – 5 1/4 x 4”. Ink the edges of the designer papers with Distress Oxide Wilted Violet ink, adhere to the silver layers and adhere one to the inside of the card using dries clear adhesive and adhere one to the card front using dimensional tape. Stamp the sentiment ‘To the world you may be one person but to me you are the world' on the inside.

Using the French Courtyard Die, cut the middle dies from white cardstock and Luxe Silver cardstock. Sponge the white diecut with dries clear adhesive and cover with Rajni Chawla’s Crystal Clear glitter. When dry, adhere the two diecuts together, slightly offset, and adhere to the card front.

Stamp the Decorative Dragonfly on white cardstock using VersaMark, cover with Ranger Superfine Detail Silver Embossing Powder, heat set and diecut using the coordinating die. Stamp the dragonfly again on vellum using Frost White ink, cover with WOW Metallic Silver Embossing Glitter. Color the back using Wilted Violet and Picked Rasperry Distress Oxide inks and diecut using the coordinating die. Adhere the vellum dragonfly on the white diecut dragonfly by adding glue just to the bodies. You want to keep the wings free. Bend the wings up to give the appearance of flight. Adhere to the card front. Sponge with dries clear adhesive and cover with Rajni’s Crystal Clear glitter.

Add extra sparkle to the card, inside and out, by dabbing randomly with dries clear adhesive and sprinkling with Crystal Ultrafine Transparent Glitter.

Other Products: White Cardstock, Diecutting Machine, Misti, Distress Oxide inks – Picked Raspberry, Wilted Violet, WOW Embossing Glitter – Metallic Silver Sparkle, Ranger Superfine Detail Silver Embossing Powder, VersaMark, Hot Glue Gun,

Instructions:

Cut out the white base of the card and fold it to 7" x 7".Cut a slightly smaller square from the paper collection and glue to the base. Cut a 6 1/2" x 6 1/2" rectangle from the white paper, then cut a slightly smaller square from the paper collection. Cut a 5 3/4 "x 5 3/4" rectangle from the white paper. Then cut smaller square from the paper collection. Stamp the sentiment on the piece of paper with black ink and adhere with Double Dots 100pc. -3D Foam Circles. From the white paper and gold paper cut frames French Gate Die. Glue a little crookedly on the gold frame with the white one so that the gold frame protrudes from under the white frame.

To make Sweet Pea, stamp flowers several times with pink ink, then color them with the Archival Ink Magneta Hue ink cover the center of the flowers with Memento - Desert Sand . Cut with coordinating die. Shape flowers with the Mold from the same collection. Fold the flowers and glue with hot glue.

To make the leaves, stamp several times the leaves from the Sweet Pea and Vining Sweet Pea sets with green ink, then color them with the same ink. Cut with coordinating die. Form the leaves with the Mold from the same collection.

Glue everything as shown in the photo, then cover the flowers and leaves with glue and glitter, add a ribbon

Other Products: Ribbon, cutting machine, hot glue

Instructions:

Card Size 5” x 7” (on white cardstock, final size). Take pattern paper from the HCDP1-2138 Decorative Dragonfly Paper Collection, and adhere it using designer dries clear adhesive. Cut one set of die on white cardstock from HCD2-7401 Classic Butterfly Companion Die, adhere it using foam circles.

Cut one eyelet circle die from HCD2-7306 Decorative Circle Frames Die on white cardstock, adhere it using foam circles.

Stamp some dragonfly images on vellum from HCPC-3983 Decorative Dragonfly Cling Stamp Set using versamark ink and sprinkle gold embossing powder and heat set. Cut  with coordinating die. Cut bigger dragonfly die on gold cardstock and adhere both layer together as shown.

Add Sentiment from HCPC-3848 Cheerful Note Sentiments Cling Stamp on white cardstock using archival ink-vibrant Fuchsia and forget me not.

Other Products: Big Shot Plus Machine

Instructions:

Make a 7” x 5” top folding card from white card stock. Cut pattern paper a little smaller than the card and adhere on the card front. Cut white cardstock a little smaller, score every 1/8" and adhere on card front.

Cut two pieces of die cuts from the French Gate die using white card stock and gold card stock. On one, adhere the gold on top and on the other adhere the white on top. Add vellum paper at the back. Adhere these pieces on the card so that the white die cut is a little above the gold die cut.

Stamp the clematis flowers in leaf green ink on deluxe flower shaping paper. Color with same ink using daubers and cut with matching die. Shape the flowers in 3D flower shaping mold . Layer two flowers to make a single flower. Add stamens in the centre. Make small filler flowers using the Sunflower ink and Wisteria stamp and die.

Make leaves using the Leafy accents set. Stamp on deluxe flower shaping paper with green archival inks, die cut and color with the same inks. Shape in the 3D Leafy Accents mold.

Cut die cuts using Swirly Accents die in white card stock and adhere on top of the card. Arrange the flowers and leaves on the card.

Stamp a sentiment from Elaborate Birthday sentiments stamp set.

Other Products: Scoring board, die cutting machine, Hot glue gun

Instructions:

Spritz a sheet of stamping card with water and sprinkle over the cosmic shimmer and brusho to create a background. Allow to dry thoroughly and cut to 6.75” x 4.75” randomly die cut the flowers into the background and adhere to a white piece of card the same size.

Stamp the flowers onto white stamping card using the archival ink and die cut. Adhere into the apertures previously diecut into the shimmery background. Trim away excess.

Die cut a large white circle and a large circle using the rustic sunflower paper, die cut the happy birthday sentiment into this. Put the circles together and die cut the smallest circle from the centre. Adhere the paper and white card together and add to the centre of the shimmer background using foam pads. Attach 2 ribbons either side of the sentiment and secure at the back of the background and mount onto a 7” x 5” piece of white card using foam pads.

Cut two 7”x 5” papers from the rustic sunflower paper collection and adhere as shown to the top left and bottom right of the 6” x 8” tent fold card base. Diecut the smallest decorative rectangle using some of the waste from the shimmery background. Snip into 2 opposite corners of the diecut and adhere to the top and bottom of the papers.

Adhere the shimmer background piece onto the centre of the card using foam pads.

Die cut 2 corners from the shimmery background card and adhere into place over the top right and bottom left of the white border.

Stamp the dragonflies onto vellum using the black ink, cover with clear embossing powder, remove excess and heat to set. Colour using lady bug ink onto the back of the vellum, die cut, lightly shape and adhere to the front of the card.

Other Products: Olive green brusho, lime burst cosmic shimmer. stamping card, 6" x 8" white card base, clear embossing powder. black versafine clair ink, foam pads

Instructions:

Cut out the white base of the card and fold it to 7 3/4" x 5 3/4". From the paper collection, cut a 7 1/2” x 5 1/2" rectangle and glue to the base. Smudge the edges of the sheet with gray ink. 

From white paper, cut the largest frame from the Fancy Classic Rectangle Frame Die set, smear the edges with gray ink and adhere to the card as shown, then from the paper collection, cut a smaller frame from the same set, smear the edges with gray ink and adhere it. From white paper cut the rounded Window Frame Die smear the edges with gray and adhere. 

On the paper from the collection, stamp the clock and cut out with the coordinating die, then with the smaller dies from the set, cut a round frame with a hole from the silver paper. Stamp the clock on paper from the collection and then use two circular dies to cut a round frame as shown. Smudge all parts with gray ink and adhere onto each other one by one with Double Dots 100pc. -3D Foam Circles for spaciousness. Cut the hands of the clock from silver paper and adhere it on the clock.

Stamp classic rose flowers on deluxe flower shaping paper using Memento Lady Bug ink and cut with coordinating die. Stamp leaves using black ink and cut with coordinating die. Paint flowers with yellow and pink ink then cover the edges of the flowers with gray ink. Color leaves with gray ink and shape using flower shaping mold. Layer flowers and create 3D rose.

Stamp the sentiment from the Timepiece Sentiments Cling Stamp Set in black ink and cut it with coordinating die, streak it with gray ink, then punch a hole. Tie the string.

Glue all the elements as shown and add a ribbon. Cover the flowers and leaves with glue and glitter. Add Nuvo droplets on the leaves.

Other Products: cutting machine, white string, ribbon, punch

Instructions:

Mat and layer French Cottage paper sheet 2B edged with Pebble onto 3B edged with Pink Peony and adhere onto a 6 x 6” top hung card blank.

Onto white cardstock stamp in Jet Black French Doorway, colour with watercolour ink and water pen allowing the ink to go beyond the stamped image. When dry, die-cut the inner doorway and use scissors to roughly cut around the stamped brick design, edge all with Pebble. Use a see-through tape to create a hinge adhering the inner and outer doorway together.

Die-cut outer doorway and decorative window together in plain cardstock, adhere behind the open doorway with Dries Clear and add self-adhesive pearls. Mount onto the card front with double dots.

Stamp onto Deluxe Flower Shaping Paper Leafy Accents in Leaf Green, colour with Vivid Chartreuse and die-cut. Lay in coordinating mold and run through the die-cutting machine. Shape with ball tool from Deluxe Flower Shaping Kit and adhere with hot glue.

Stamp in Vivid Chartreuse Cottage Garden Hydrangea onto Art Foam and die-cut. Add Apple Green Nuvo to the centre and allow to dry.

Stamp onto Deluxe Flower Shaping Paper Wild Rose petals in Carnation Red and Leaves in Leaf Green. Colour with Sunflower, Buttercup and Vibrant Fuschia front and back. Die-cut and shape with Golf and Ball Tools. Adhere the petals together with hot glue. Pierce the centres with the Golf Tool and thread Pastel Bead Stamen through securing at the back with hot glue and cutting off the excess wire.

Adhere the flowers and leaves onto the card with hot glue. Cut a piece of sponge and apply Dries Clear and Crystal Clear to flowers and leaves.

Other Products: Paper trimmer, scissors, hot glue, clear tape, self adhesive pearls

Instructions:

Create a side opening shaped card blank using Teardrop Lattice Gateway Die. Overhang the left hand side of the die so as not to cut. Die-cut with the same die with French Cottage 10B edged in Vibrant Fuschia. Die-cut a frame using the same outline die and another smaller die from Eyelet Frame Gateway edge with Olive.

Die-cut the smallest Eyelet Frame Gateway out of solid gateway allowing room for frame. Die-cut the smallest solid Eyelet Frame together with the scallop in white cardstock and adhere this around the window. Use Dries Clear to adhere Clear Cardstock behind the opening and onto this double up foam strip. Lay French Cottage 4A image onto foam tape but only seal partially. Add Red Elements before completely sealing. Add foam dots to the back and adhere to the card front. Add foam dots to the green trim and adhere over.

Stamp onto Deluxe Flower Shaping Paper Leafy Accents in Leaf Green, colour with Vivid Chartreuse and die-cut. Lay in coordinating mold and run through the die-cutting machine. Shape with ball tool from Deluxe Flower Shaping Kit and adhere with hot glue.

Stamp onto Deluxe Flower Shaping Paper Wild Rose petals in Carnation Red. Colour some petals in Leaf Green to wrap around the buds. Colour with Sunflower, Buttercup and Vibrant Fuschia front and back. Shape with Golf and Ball Tools. Adhere the petals together with hot glue. Pierce the centres with the Golf Tool and thread Pastel Bead Stamen through securing at the back with hot glue and cutting off the excess wire.

Stamp in Jet Black onto white cardstock Cottage Lifestyle/French Cottage ‘scapes and die-cut, colour with Zig Clean Color Real Brush Markers. Add 3D Lacquer onto the flower pots and allow to dry.

Adhere flowers and leaves onto the card with hot glue and add the bicycle and flower pots with dots. Add Dries Clear and Crystal Clear onto the flowers and leaves using a sponge.

Other Products: Paper trimmer, scissors, hot glue

Instructions:

You can see a video tutorial of this card here and here. Score a piece of 10" x 7" card base at 5" unfold to make a 5" x 7". Cut a sheet of 4 3/4" x 6 3/4" pattern paper from floral frames paper collection and adhere it on the card base. Die cut up a sheet of luxe silver cardstock using the die from filigree companion frame die set and adhere it on the card base. 

Other Products: Pearls