Other Products: Versamagic perfect plumeria, foam tape, ranger gold embossing powder, steadler watercolor pencils, versamark watermark stamp pad.

For more tips on creating with the Sweet Peony collection, watch the tutorial at https://youtu.be/L9_MLkvpGPQ.

Instructions: Create a card base of size 5 1/2” by 7 1/2” and mat it with pattern papers from the sweet peony paper collection. Cut pattern paper from the sweet peony paper collection to mat on the card base. Cut the large window frame from the rounded window frame die set using luxe gold cardstock. Use a circle die from the eyelet circle and basics small die to cut a window in the center of the round frame. Cut the round frame in half making a semicircle. Use the same circle die to cut a semicircle window on the left side of the pattern paper. Mat the pattern paper on the card base using foam tape and adhere the round frame on top of it.

Stamp the images from the peony bud and Blossoms stamp set using versamark watermark ink and heat emboss in gold. Color the images using steadler watercolor pencils and cut them using their coordinating dies. Stamp the Peonies from the large peony stamp set using archival rose madder and color using the same ink. Stamp the leaves with archival fern green and color using memento bamboo leaves. Stamp the smallest flowers from the small sweet peony stamp set with archival fern green and versamagic perfect plumeria, lightly color the petals using the same inks. Cut the flowers and leaves using their coordinating dies and shape them using the groove golf tools.Add the rock candy stamens to the flower centers. Arrange the flowers and stamped images as shown.

Lastly, add a sentiment from the Sweet Peony paper collection and dust the flowers with crystal clear glitter powder.

Other Products: White Cardstock, Hot Glue Gun, Die Cut Machine

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the Dazzling Dahlia Collection watch the tutorial at https://youtu.be/KIIpo2C9oDs.

Instructions: For the first panel I cut a piece of Page 10B with the largest shape die from HCD2-7326 Ornate Flourish Gateway Die. Glue this piece down as a shadow panel. Using the Shadow panel die, then the outer ornate die and the third largest die together cut using white cardstock. ut inner panels picking out a pretty part of Page 3B, 11B, and 1-B. Layer the two center panels (the orange piece first and then the yellow ornate piece and glue down. Cut out the upper panel and glue it down then cut out the bottom panel and stamp the sentiment then glue it down.

Using Fern green ink, stamp the leaves. Stamp the flower petals with Rose Madder ink then color using Buttercup in the center then Rose Madder on the edges. Color the leaves with Leaf Green then cut everything out using the coordinating dies. Run the petals and leaves through the die cut machine inside the mold. I spritzed everything with some water. Turn everything out onto the desk to dry. As the flower petals are drying add a bit more shape with the Deluxe Flower Shaping Kit. Using the hot glue gun, glue the flower and leaves together and then glue to the front of the card. Add glitter and allow to dry.

For the second panel of the card I took the scalloped die from HCD2-7325 Scalloped Flourish Gateway Die and cut a pretty scene from the paper collection. This was page 3-B. I added some Rose Madder ink to the edges and glued the panel down.

For the third panel I cut the shadow piece from HCD2-7328 Lattice Swirl Gateway Die from page 11-B and glued it down. Cut the lattice die using white cardstock and glue it down. Cut a piece of the paper to fit inside the oval and glue it down. I chose a section of Page 1-B for this.

Other Products: White cardstock, pearls

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

For more tips on creating with the Dazzling Dahlia Collection watch the tutorial at https://youtu.be/KIIpo2C9oDs.

For more ideas on creating with the Special Sentiments Stamps & Dies, watch the tutorial at https://youtu.be/-dYnAWXIH3E.

Instructions: Card size: 6 x 6”. Start with 12 x 6 white cardstock, score then fold in half to make a 6 x 6” card base. Cut decorative paper 5 3/4" square then glue it to the card front.

Cut from white cardstock, 2 corners and 1 Ornate Pocket with Pierced “V” inside border. Glue the 2 corners to top corners and Pocket to bottom of card. Stamp sentiment using Rose Madder (using a Misti Tool will help to make sure the stamping is completely solid). Die cut the Happy Birthday and glue it to the Ornate Pocket.

Stamp small Dahlia 4 times using Rose Madder, sponge with Buttercup, die cut then sponge edges using Rose Madder again, (See video for shaping molds). Glue 3 layers together but on the 4th, shape into a bowl, stamped side out, insert stamen then glue the bowl closed as close as possible around the stamen. Glue the bowl into center of flower. Cut 1 Swirly Border from white and cut in half, tuck each half into flower. Stamp leaves using Leaf Green, sponge with Vivid Chartreuse, die cut then mold. Glue the combination of flower and leaves to the top center of card.

Glitter the card and flower and set pearls as desired.

Other Products: Ribbon: Organza, Satin , Pearls. Hot glue gun, Foam Inking tools, Double sided tape, Ranger Archival Ink Pad-Saffron, Glitter, Fussy cutting scissors, Water spritzer, Misti inking tool, Nuvo Crystal Drops-Red Berry, Shaved glass/diamond dust.

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the Dazzling Dahlia Collection watch the tutorial at https://youtu.be/KIIpo2C9oDs.

Instructions: This gatefold card measures 7 inches high and 5 inches wide when closed. Using the gateway fold card for the card base, cut the two side panels down the centre in the length so you have two half fronts like doors.

To mat the card base, use the sheet #9B for the matting. Die cut the matting by using the die from the scalloped Flourish Gateway set, trim this to fit a little smaller than the card base where needed, also cutting in the length. Adhere in place to the card inside and the card front.

Using this same paper sheet #9B die cut the lacey elements needed for the card from the Scalloped Flourish Gateway die set. Three times of the bottom die and four times the rounded top die in the set (half circle). Ink the edges with the red geranium ink. Two of the rounded die cuts are adhered together so both sides are the same. Adhere this to the left door so it forms a half circle and crosses over to the right side door. Adhere a half circle lace next to this so it forms a full circle. Adhere a half circle to above this on the card. To the right side adhere the other die cuts as seen in the photo. The remaining die cut will be used for the inside of the card.

Taking the Lattice Swirl Gateway die set and from the collection paper sheet #5A make the die cut. Remove the sentiment part of the die cut and adhere the remainder of the lace frame to the card inside.

Taking the sentiment part of this die and the sheet #9B die cut the sentiment. With the Large Circle die set, chose the circle that fits to the sentiment that has been cut. Make this into a circle. Die cut this circle three times from the white cardstock. Adhere all the circles together. Adhere the letters from the die cut sentiment back into the circle. Ink with the red geranium ink. The words will also stand out more by doing this. Adhere to the adhered lace frame on the card in its place. Adhere the remaining die cut under the sentiment circle as shown. Curl the two half fronts of the card base so the tops show the inside of the card.

Using the white cardstock, the stamp sets and the library ink make the dahlias and leaves. The three dahlias have two petal layers each. One large and one smaller layer. Stamp enough for three flowers and colour them with the saffron and the red geranium inks. The centres are filled with the shaved glass. There are seven leaves used for this card. Colour these using the green inks. Die cut and shape these petals and leaves using the matching molds and the water spritzer. Before adhering the petals together the glitter is applied. Apply clear drying adhesive with the hydra sponge then dip int the glitter. Do the same with all the leaves. The smaller flowers from the Tweet Cherry Blossoms sets are made the same way except these have stamens as flower centres. The stamens are threaded through a hole made in the centre of the flower, secured with the hot glue gun. Then they are dipped into the glitter and set aside to dry. Once dry, trim away the stamen ends ready to use. Make as many as needed for the card in different sizes. Taking the Wild Aster Spray sets and make at least six sprays, ink these with the olive ink. Apply the nuvo crystal drops to the berries in the sprays. Make a banner sentiment for the card using the white card stock, library ink and the ‘You’re an amazing friend’ from the Elegant Gateway Sentiments stamp set. Use the Olive ink to ink the edges of the banner. Make two half bows from the organza, pearl and the satin ribbons.

To adhere all the elements to the card: Adhere two dahlias to the left side of the card front door. The placement is to the top of the lace circle and under the curled part. Adhere the remaining dahlia to the right side in the curl of the door, before adhering, checking so it will still open and close. Arrange and adhere the leaves in place then all the smaller flowers and the sprays to both doors. Adhere the ribbons and the sentiment. Arrange and adhere the flowers and sprays to the card inside as pictured.

Other Products: Cardstock- White, Ivory Burlap String, Distress Oxide Ink (Squeezed Lemonade, Seedless Preserves), Paper Distresser, Scrapbook Adhesives by 3L (Crafty Foam Tape, Dual Tip Glue Pen, E-Z Runner Ultra, Adhesives Dots Medium, 3D Foam Squares)

For more tips on creating with the Dazzling Dahlia Collection watch the tutorial at https://youtu.be/KIIpo2C9oDs.

Instructions: The green bordered patterned paper is the background. Cut the green patterned paper to 8.5 x 8.5” and distress the edges. Adhere to the middle of the layout using foam tape. Cut a strip of the stripe patterned paper that is 2.5 x 8.5” and adhere across the green patterned square. Die cut a decorative circle from white cardstock and cut 2 small sections from die cut and adhere to the top and bottom of the layout. Add a small tag and ticket to the top of the layout using foam squares. Add burlap string to the tag.

Double mat the larger photo in 2 layers of white cardstock. Mat the smaller photo in white cardstock. Add the photos to the layout using foam tape.

Stamp 3 of each flower size using brown ink (Staz On Ink- Timber Brown) onto Deluxe Flower Shaping Paper. Stamp 4 of each leaf size using brown ink onto Deluxe Flower Shaping Paper. Add color to the leaves using green ink (Archival- Olive) and daubers. Add color to the middle of all of the flowers using yellow ink (Distress Oxide- Squeezed Lemonade) and daubers. Add color to the tips of the flowers using purple/pink ink (Distress Oxide- Seedless Preserves) and daubers. Shape the flowers and leaves using the coordinating shaping mold. Assemble the flowers and add Prills to the middle of the flowers using liquid adhesive. Add 2 flowers to the bottom left hand corner of the layout and the other to the top right hand corner. Add leaves around the flowers and between the matted photos.

Other Products: Die cutting machine, hot glue gun, hot glue, paper trimmer, white metallic cardstock, foam squares.

For more ideas on creating with the 5 x 7 Decorative Frame Dies, watch the tutorial at https://youtu.be/qdBFA5VpmSo.

For more tips on creating with the Dazzling Dahlia Collection watch the tutorial at https://youtu.be/KIIpo2C9oDs.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Cut a piece of white metallic cardstock to 7” x 10”, fold in half to create a 5” x 7” card base. Cut a piece of floral paper from the Dazzling Dahlia paper collection to 4 7/8” x 6 7/8” and adhere to front of card base. Die cut decorative frames using white metallic paper and paper collection. Adhere to card front using foam squares.

Stamp 5 Dazzling Dahlia flowers and 5 leaves on flower shaping paper using Magenta Hue and Red Geranium for the flowers and Leaf Green for the leaves. Die cut flowers and leaves with coordinating dies and then color using archival inks and daubers. Shape with Dahlia Shaping Mold and then glue petals together to form flower. Pierce a hole in the middle of flower for the stamens and glue with hot glue.

Die cut swirls and color with green archival ink. Attach flower, leaves and swirls to card using hot glue. Diet cut tag from paper collection, stamp sentiment on tag and adhere to center of card using foam squares.

Other Products: Wendy vecchi ink orange blossom, versamark watermark stamp pad, ranger white embossing powder, versamagic perfect plumeria, foam tape, vellum.

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

To see how to shape the roses, watch the video at https://youtu.be/Z8P070kC3oo.

Instructions: Create a fold out card using the gateway fold card bases. Cut one flap from the card base to create a single fold card. Cut the pattern papers from the dazzling dahlia paper collection and adhere on the card base. Cut the decorative centers and frames from the elegant swirl gateway die set using pattern papers from the dazzling dahlia paper collection and luxe gold cardstock. Align and adhere the decorative cuts on the gold cuts. Glue the decorative centers on the card base and adhere the frame using foam strips.

Stamp the roses from the classic rose cling stamp set with versamark watermark on vellum, heat emboss them in white and color them using orange blossom ink. Stamp the leaves from the leafy accents cling stamp set with archival fern green and color using memento bamboo leaves and olive green. Cut the flowers and leaves using their coordinating dies and shape them using the coordinating 3d shaping mould. Stamp the smallest flowers from the Purr-fect posies stamp set with archival fern green and versamagic perfect plumeria, lightly color the petals using the same inks.Cut the petals using the coordinating die and shape them. Add the pastel bead stamens to the flower centers.

Arrange everything as shown. Lastly, add a sentiment from the Classic Wedding Paper and dust the flowers with crystal clear glitter powder.

Other Products: Iris cardstock, stamp positioner, foam squares

For more tips on creating with the Sweet Peony collection, watch the tutorial at https://youtu.be/L9_MLkvpGPQ.

For more ideas on creating with the 5 x 7 Decorative Frame Dies, watch the tutorial at https://youtu.be/qdBFA5VpmSo.

Instructions: Cut a piece of Deluxe Flower Shaping Paper 10” x 7”, score at 5” along the long side and fold to create a base card 5” x 7”. Cut a piece of gold cardstock 5” x 7” and adhere to the front of the card. Cut a piece of pattern paper 4 17/8” x 6 7/8” and adhere to the front of the gold card. Die cut the decorative frame using the No. 2 and No. 3 dies from the HCD2-7309 Elaborate Oval Frames die set out of gold cardstock and adhere to the front of the card with foam strips. Stamp the sentiment from the HCPC-3845 Just For You Sentiments Cling Stamp set in Lilac Posies inside the frame as shown with a stamp positioner.

Stamp the peony and bud images from the HCPC-3821 Peony Bud and Blossom Cling Stamp set in Jet Black ink on Iris cardstock. Colour the images with Zig Clean Colour Brush Markers and die cut with the coordinating dies. Shape and adhere under and over the frame as shown with foam squares as shown.

Other Products: Die cut machine; Hot glue gun; Yellow flower soft;

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the Dazzling Dahlia Collection watch the tutorial at https://youtu.be/KIIpo2C9oDs.

Instructions: Use the largest die from the Lattice Swirl Gateway Die and cut from the Dazzling Dahlia Paper. Adhere the middle and back panel in place. On the back, stamp the sentiment with the Majestic Violet ink. Use the Zig markers and color in the leaves and flowers on the sentiment. Glitter the print in the paper on both middle and back. Set aside to dry.

Die cut the second die from the set and adhere on top of the first panel, add foam dots to the back and adhere to the front of the card.

Stamp 3 of the large and 1 of the smaller flowers on white with the Majestic Violet, cut out with the coordinating die, color the petals from the bottom up leaving some white showing, ink the edges with the same ink still leave some white showing. Place in the coordinating mold, shape, finish shaping using the Flower shaping tool curler, glue all together using the hot glue gun. Turning the smaller one so the stamped side shows. Add the flower soft in the center. To finish add glitter to all the leaves and flower.

Other Products: Foam tape, Versamagic Pretty Petunia, Clear glossy gel

For more tips on creating with the Wild Aster Collection watch the tutorial at https://youtu.be/1mriCKqh-Ac.

For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.

Instructions: Cut a piece of Deluxe Flower Shaping Paper 10” x 7”, score at 5” along the long side and fold to create a base card of 5” x 7”. Cut a piece of silver cardstock 5” x 7” and adhere to the front of the card. Cut a piece of pink pattern paper 4 7/8” x 6 1/4” and adhere to the front of the card. Cut a piece of pattern paper that has the bridge image on 4” x 6” and adhere to the front of the card. Die cut the frame and decorative insert out of silver cardstock using the No. 1 and No. 2 dies from the HCD2-7191 Intricate Swirls Die set. Adhere the outer frame to the card with foam tape and then adhere the decorative die to the inside of the frame.

Stamp the leaf images from the HCPC-3887 Wild Asters Cling Stamp Set in Library Green ink on Deluxe Flower Shaping Paper. Colour with Vivid Chartreuse and Bamboo Leaves ink and die cut with the coordinating die. Colour the backs of the leaves with Vivid Chartreuse ink and shape using the Groove Golf tools. Add Crystal Clear glitter using glossy gel and adhere to the top left of the frame over the pattern image. Stamp the flower images from the HCPC-3887 Wild Asters Cling Stamp Set in Lilac Posies ink on Deluxe Flower Shaping Paper. Colour the centres with Tiger Lily and Cantaloupe inks and the outer petals with Pretty Petunia ink and die cut with the coordinating dies. Colour the backs with Pretty Petunia ink and the edges of the petals with Lilac Posies ink. Shape using the Groove Golf tools and assemble with two layers of each size. Pierce a hole in the centres and insert the gold coloured stamens. Add Crystal clear glitter with glossy gel, trim the threads and adhere to the upper right of the frame over the leaves as shown.

For the buds, stamp the small size flower images from the HCPC-3887 Wild Asters Cling Stamp Set in Library Green ink on Deluxe Flower Shaping Paper. Colour with Vivid Chartreuse and Bamboo Leaves inks and die cut with the coordinating die. Colour the backs with Vivid Chartreuse and shape using the Groove Golf tools. Assemble using one green and one pink layer. Pierce the centres and insert the gold coloured pearl stamens. Add Crystal Clear glitter using glossy gel and trim the threads and adhere around the larger flowers.

Die cut the tag from the patterned paper using the coordinating die from the HCD1-7203 Ornamental Tags Die set and adhere among the flowers as shown.

Other Products: Die cutting machine, scoreboard, bone folder, hot glue gun, White pearl card, Memento Dye Ink - Pear Tart

For more tips on creating with the Dazzling Dahlia Collection watch the tutorial at https://youtu.be/KIIpo2C9oDs.

Instructions: Side fold card measures - 5 inches by 7 inches. To create a 5” x 7” card base - cut out a 10” x 7” piece of White card and score it at 5” (long side up), fold using a bone folder along the score line. Cut out a 4 7/8” x 6 7/8” piece of HCDP1-2121 Dazzling Dahlia Paper Collection and adhere to the card front. Die cut a frame from white pearl Card with HCD2-7191 Intricate Swirl Frames Die and adhere additional layer of white cardstock to the back, then adhere the final piece to the 3 1/2” x 5 1/2” piece of HCDP1-2121 Dazzling Dahlia Paper Collection using Darice Adhesive Foam Strips. Die cut intricate frame from white pearl card with HCD2-7191 Intricate Swirl Frames Die and adhere it to the card front using metal tip and Designer Dries Clear Adhesive.

Stamp the flower petals on HCPP1-475 Deluxe Flower Shaping Paper with HCPC-3928 Dazzling Dahlia Cling Stamp Set with TSMP400 Memento Dye Ink - Rose Bud and colour them with Memento Dye Ink pads: Pear Tart and Rose Bud, then die cut them with matching HCD1-7323 Dazzling Dahlia Die. Stamp the leaves on HCPP1-475 Deluxe Flower Shaping Paper with HCPC-3929 Dahlia and Leaves Cling Stamp Set with TSMP707 Memento Dye Ink - Bamboo Leaves and colour them with Memento Dye Ink pads: Bamboo Leaves and Rose Bud, then die cut them with matching HCD1-7324 Dahlia and Leaves Die. Place leaves and flower petals in HCFB1-494 3D Dahlia Shaping Mold, spray them with water and run them through a die cutting machine. Assemble Dahlia flower using a hot glue gun. Using metal tip and Designer Dries Clear Adhesives, apply glue on the flower petals and leaves and sprinkle with PGM15016 Rajni Chawla's Frosting Powder, then adhere the flower to the card front using a hot glue gun and fill in the composition with leaves.

Die cut the sentiment from HCPP1-475 Deluxe Flower Shaping Paper with HCD1-7179 Butterfly Kisses Decorative Die, then colour it with TSMP400 Memento Dye Ink - Rose Bud and adhere on the card front using TSMP400 Memento Dye Ink - Rose Bud.

As a final touch, colour in the butterfly image with Memento Dye Ink pads: Pear Tart and Rose Bud and adhere it to the card as an accent.

Other Products: Diamond Dust, White Cardstock, Big Shot Machine, Glue Gun.

For more tips on creating with the Dazzling Dahlia Collection watch the tutorial at https://youtu.be/KIIpo2C9oDs.

Instructions: Card size is 6” x 6” (final Size). Cut Pattern paper from the Dazzling Dahlia Paper Collection HCDP1-2121 smaller than the card size 5.875” x 7.875”, tear the edges and adhere it on the card base.

Stamp two dahlia images from Dazzling Dahlia HCPC-3928 on white cardstock using archival ink-Magenta Hue, cut them with coordinating Die, Dazzling Dahlia HCD1-7323 and adhere them on the top left and right bottom using foam tape as pictured.

Cut one die from Rounded Window Frame Die Set HCD1-7271 and adhere it with foam tape at the centre of the card base. Cut one small circle from Decorative Circle Frame Die set add sentiment from For My Friend Sentiment Cling Stamp Set HCPC-3844 using archival ink-Vibrant Fuchsia and plum, adhere this die using foam tape as seen picture. Cut two dies from Swirly Border Accents Die HCD1-7262 on white cardstock, add crystal clear glitter and adhere using glue gun. Cut two Starry Night Decorative Die HCD1-7252 on white cardstock and adhere it on the left and right side edges of the card base.

Stamp some dahlia flowers from Dazzling Dahlia Cling Stamp Set HCPC-3928 using archival ink-Magenta Hue and cut them with coordinating die Dazzling Dahlia Die HCD1-7323, color them using archival ink-sunflower (at the centre of the petals), rose madder, majestic violet and plum on the edges of the petals. Shape them using 3D Dahlia Shaping Mold HCFB1-494 and use groove golf tool also to give some more shape to the petals. Take two large petals and two small petals to create layers. And for the centre take one small layer and do fringing cutting and give shape to create bud and place it at the centre. Add diamond dust randomly and arrange it on the bottom left side of the card.

Stamp some leaf images from Dahlia and Leaves Cling Stamp Set HCPC-3929 using archival ink-library green, cut them with coordinating die Dahlia and Leaves HCD1-7324 and color the using archival ink-leaf green. Shape them using 3D Dahlia Shaping Mold HCFB1-494, add diamond dust and place these leaves behind the dahlia flower as pictured using glue gun.

Other Products: Vellum Paper, Cairo Cream Cardstock, Hot glue glue

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.

Instructions: Ready box measures 4.5" × 4.5" × 4.25". First cut 4 base panels from Luxe Gold cardstock using Scalloped Flourish Gateway die. Score on 4.25" and fold all 4 panels. Create a box using Cairo Cream Cardstock measures 4.5"×4.5"×4". Adhere all four gold cardstock panels on all four sides.

Cut 4 decorative gateway from vellum paper using Scalloped Flourish Gateway die. Adhere on box as pictured. Further, cut a frame from Luxe Gold cardstock using same die and glue it on box. Cut 8 hinges from Luxe Gold cardstock and cairo cream cardstock using Hinges die and adhere on all 4 corners.

Stamp Oakberry Blossoms on deluxe flower shaping paper using cactus flower ink and cut with coordinating dies. Shape flowers using groove golf tool. Pierce the center of flowers and insert Rock Candy Stamens-Small. For 1 flower I use 2 layers. Stamp leaves using fern green ink and cut with coordinating dies. Shape leaves using shaping mold. Apply Art Glitter Clear Dries glue and add crystal clear glitter on flowers and leaves. Arrange flowers and leaves using hot melted glue as pictured.

Other Products: Smooth White Cardstock, Cairo Cream Cardstock, Flat Back Pearl, Hot Glue

VIDEO LINKS

For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.

Instructions: Ready side fold card measures 5” × 7”. First, take a folded card of cairo cream cardstock and cut base using Scalloped Flourish Gateway Die. Cut decorative gateway die cut using Ornate Flourish Gateway die and glue it on card base. Cut a piece of Luxe Gold cardstock using Scalloped Flourish Gateway die and a decorative piece from white cardstock using Ornate Flourish die. Arrange on card and glue as shown. Glue some flat back pearls on it. Cut a flag end strip from Luxe Gold cardstock and white cardstock. Stamp sentiment using cactus flower ink and glue it on card.

Stamp Oakberry Lane Blossoms on deluxe flower shaping paper using cactus flower ink and cut with coordinating dies. Shape flowers using groove golf tool. Pierce the center of flowers and insert Rock Candy Stamens-Small. For 1 flower I use 2 layers. Stamp leaves using fern green ink and cut with coordinating dies. Shape leaves using shaping mold. Apply Art Glitter Clear Drying glue and add crystal clear glitter on flowers and leaves. Arrange flowers and leaves using hot melted glue as pictured.

Other Products: 5” x 7” white card base, gorgeous grape ink pad – stampin up!, white stamping card, foam pads, white ribbon, hot glue

Video

For more ideas on creating with the 5 x 7 Decorative Frame Dies, watch the tutorial at https://youtu.be/qdBFA5VpmSo.

For more tips on creating with the Tulip Time collection, watch the tutorial at https://youtu.be/rfYMxeNBmJk.

Instructions: Cut a pink paper from the Tea Time paper collection slightly smaller than the card base. Die cut the largest royal elegance die in a deep purple paper and the 2nd die using a green paper. Layer these 3 papers onto the card base using dries clear adhesive.

Stamp the sentiment using gorgeous grape ink onto white stamping card and colour the flowers using a water brush. Use a green zig marker to colour the leaves.

Die cut the sentiment using the eyelet oval and edge the oval with baby's breath glitter. Adhere to the card base using foam pads.

Stamp the flowers onto flower shaping paper using the lilac posies ink and die cut. Edge the petals with rose bud ink, place face down into the mold, spritz with a little water and run through the die cutting machine to shape. Make a hole in the centre using the groove tools and thread stamens into the centre, secure with hot glue. Sponge dries clear adhesive onto the petals and sprinkle with ultrafine transparent glitter.

Make a ruffle/bow with the ribbon and hot glue to the base of the card with the 2 flowers.

Add nuvo drops to the centre of the coloured flowers on the sentiment and sprinkle with baby's breath glitter, remove excess and allow to dry

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, sisal, self-adhesive pearls

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

For more tips on creating with the Leafy Accents shaping molds, watch the tutorial at https://www.youtube.com/watch?v=YaDMrVikE44.

Instructions: Use the biggest die from the Scalloped Flourish Gateway and cut 3 from papers of the Sweet Peony paper collection, adhere those to all 3 sections of the base. Stamp the Elegant Gateway Sentiment in Vibrant Fuchsia ink onto white cardstock, diecut it with Scalloped Flourish Gateway Die and attach to the last panel. Combine the biggest die from the Scalloped Flourish Gateway and third die from Elegant Swirl Gateway Die to get two elements from the Sweet Peony paper. Use dimensional tape to adhere them to the front and the last panel. Use the Elegant Swirl Gateway Die and cut 2 frames from white cardstock, adhere them to the first and last section. Cut out white frame with a smallest die from Elegant Swirl Gateway Die, glue it on the middle panel. Stamp the inscription from For My Friend Sentiments Cling Stamp Set in Vibrant Fuchsia ink onto white cardstock and cut it out.

Stamp blossoms from Classic Rose Cling Stamp Set in Vibrant Fuchsia ink onto Deluxe Flower Shaping paper. Color them with the Stack and Store Daubers, Vibrant Fuchsia and Rose Bud inks. Then diecut them with coordinating dies. Stamp blossoms from Lush Lilacs Cling Stamp Set in Vibrant Fuchsia, Buttercup and Leaf Green ink onto Deluxe Flower Shaping paper and diecut with coordinating dies. You`ll also need about 7 branches from Leafy Accents Cling Stamp Set, 3 Classic Rose leaves and 2 big lilacs clusters. Stamp them in Leaf Green ink, color them and diecut with coordinating dies. Shape Classic Rose flowers and leaves using their coordinating shaping molds. Shape lilacs with Deluxe Flower Shaping stylus. Thread pink stamens through the centers of big flowers and attach with hot glue, trimming off the excess string. Use dimensional adhesive and hot glue to attach sisal, sentiment, blossoms and leaves onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers.

Decorate card with a few small self-adhesive pearls.

Other Products: Ranger Archival ink – Dandelion, spray adhesive, stamp positioner, gloss gel medium

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Sponge all the edges of the fold out card with Vivid Chartreuse ink. Front - Die cut the dark green patterned paper using the No. 1 die from the HCD2-7326 Ornate Flourish Gateway Die, sponge the edges with Vivid Chartreuse ink and adhere to the front of the card. Die cut the decorative frame using the No. 2 die and No. 3 dies from the HCD2-7326 Ornate Flourish Gateway Die out of white cardstock. Sponge the decorative edge, add Frosting Powder using spray adhesive and adhere to the front. Die cut two inner frames using the No. 3 die from the HCD2-7326 Ornate Flourish Gateway Die and the No. 3 die from the HCD2-7325 Scalloped Flourish Gateway Die set out of white cardstock. Adhere the two frames together and sponge the frame with Vivid Chartreuse ink. Add Frosting Powder with spray adhesive and adhere to the front of the white decorative frame. Die cut the light green patterned paper using the upper and lower plain edge inner dies and adhere inside the upper and lower frame as shown. Die cut the pink patterned paper using the middle plain edge insert die and adhere to the centre of the frame. Die cut the decorative dies out of white cardstock using the plain edge and inner decorative dies – upper, middle and lower and adhere to the inside of the frame as shown.

Stamp the leaf images from the HCPC3-907 Large Wild Rose Stamp Set in Library Green ink on Deluxe Flower Shaping paper. Colour with Vivid Chartreuse and Bamboo Leaves inks and die cut with the coordinating die. Sponge the edges with Lilac Posies ink and the backs with Vivid Chartreuse ink and shape using the coordinating mold. Add Crystal Clear glitter using glossy gel. Adhere across the front as shown.

Stamp the flower images from the HCPC-3906 Small Wild Rose Stamp Set in Lilac Posies ink on Deluxe Flower Shaping Paper. Colour the centres with Cantaloupe and Dandelion inks and the outsides with Magenta Hue ink and die cut with the coordinating dies. Sponge the edges of the flowers with Lilac Posies ink and the backs with Magenta Hue ink. Shape using the coordinating mold and pleat with your fingers and assemble using two of the larger size and one of the smaller size. Pierce the centres of the flowers and insert the gold coloured pearl stamens and magenta coloured rock candy stamens. Add Crystal Clear glitter using clear glossy gel, trim the threads and adhere over the leaves.

Middle panel - Die cut the pink patterned paper using the No. 1 die from the HCD2-7325 Scalloped Flourish Gateway Die set. Stamp the sentiment from the HCPC-3930 Elegant Gateway Sentiments Cling Stamp Set in Lilac Posies ink. Sponge the edge with Vivid Chartreuse ink and adhere to the front of the panel. Add Ultrafine Crystal glitter to the sentiment using Dries Clear glue. Cut a piece of green patterned paper 4 3/4” x 3/4” and sponge the edges with Vivid Chartreuse ink. Cut a patterned strip from the patterned paper 1/4" x 4 3/4", sponge the edge with Vivid Chartreuse ink and adhere to the front of the green strip and then adhere to the bottom of the panel.

Back panel - Cut a piece of dark green patterned paper using the No. 1 die from the HCD2-7325 Scalloped Flourish Gateway Die set, sponge the edge with Vivid Chartreuse ink and adhere to the front of the panel. Die cut two frames using the No. 3 die from the HCD2-7326 Ornate Flourish Gateway Die and the No. 3 die from the HCD2-7325 Scalloped Flourish Gateway Die set out of white cardstock. Adhere the two frames together and sponge the frame with Vivid Chartreuse ink. Add Frosting Powder with spray adhesive and adhere to the front of the green paper. Die cut the light green patterned paper using the upper and lower plain edge inner dies and adhere inside the upper and lower frame as shown. Die cut the pink patterned paper using the middle plain edge insert die and adhere to the centre of the frame. Die cut the decorative dies out of white cardstock using the plain edge and inner decorative dies – upper, middle and lower and adhere to the inside of the frame.

Stamp the long sentiment from the HCPC-3930 Elegant Gateway Sentiments Cling Stamp Set in Lilac Posies ink on green patterned paper and die cut using the long banner die from the HCD1-7204 Arrows and Banners Die set. Sponge the edge with Vivid Chartreuse ink and adhere across the middle of the panel.

Stamp the leaf images from the HCPC3-907 Large Wild Rose Stamp Set in Library Green ink on Deluxe Flower Shaping paper. Colour with Vivid Chartreuse and Bamboo Leaves inks and die cut with the coordinating die. Sponge the edges with Lilac Posies ink and the backs with Vivid Chartreuse ink and shape using the coordinating mold. Add Crystal Clear glitter using glossy gel. Adhere across the front.

Stamp the flower images from the HCPC-3906 Small Wild Rose Stamp Set in Lilac Posies ink on Deluxe Flower Shaping Paper. Colour the centres with Canteloupe and Dandelion inks and the outsides with Magenta Hue ink and die cut with the coordinating dies. Sponge the edges of the flowers with Lilac Posies ink and the backs with Magenta Hue ink. Shape using the coordinating mold and pleat with your fingers and assemble using two of the larger size and one of the smaller size. Pierce the centres of the flowers and insert the gold coloured pearl stamens and magenta coloured rock candy stamens. Add Crystal Clear glitter using clear glossy gel, trim the threads and adhere over the leaves as shown.

Other Products: Nida Tanweer Magic Glitter Powder, scissors, funnel tray, hot glue, die cutting machine.

For more tips on creating with the Tulip Time collection, watch the tutorial at https://youtu.be/rfYMxeNBmJk.

Instructions: It’s a 5” by 7” card, for the card base take Deluxe Flower Shaping Paper measuring 10” by 5”, score in half, trim a panel from Tulip Paper Collection which is slightly smaller than card base adhere this paper on card base using clear glue.

Diecut two frames from Deluxe Flower shaping paper using Intricate Swirl Frame Die, adhere together using clear glue and add this frame on the card as shown using Darice foam strips.

Stamp all required images using Archival Ink Coffee, and Flowers in Magenta Hue on deluxe paper, color all images with zig clean brush marker and flower centers from tiger lily and edges with Magenta Hue.

For the flowers, Shape the flowers using shaping mold, finish shaping using shaping kit, layer flower petals, make a hole in the center, add stamen using hot glue, make a few flowers, cut the extra stamens wire. Apply glue using sponge and cover tulips with Magic Glitter.

Shape the fillers using shaping kit. Arrange all ready elements as shown.

Die cut a sentiment from paper collection using Ticket & tag die and adhere editedusing dimensional tape.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine, gallery oil pastels 241, 224,

For more tips on creating with the Sweet Peony collection, watch the tutorial at https://youtu.be/L9_MLkvpGPQ.

For more ideas on creating with the Decorative Royale Square & Circle Dies, watch the tutorial at https://youtu.be/tqmtn_TiVVw.

For more tips on creating with the foam paper & stamens, watch the tutorial at https://youtu.be/Oma6ctVmUD0.

Instructions: For the base of card, use a Swing Fold Card and cut off the circle part. Cut a piece of paper from Cottage Garden Paper Collection 5 3/4 " x 5 3/4 " and adhere to the card base using Dries Clear Adhesive. Cut a piece of paper from the Cottage Garden Paper Collection using the Eyelet Royale Die. Add to the base using 3d foam tape.

Stamp the Large Sweet Peony Cling Stamp Set on foam paper Ranger Archival Ink Pad - Garden Patina and cut using the coordinating dies. Color with Gallery soft oil pastels 241, 224. You will need 2-3 petals for each flower to create flowers. Use an iron or heat gun to heat the petals and when they start to shrink move them on the Molding Mat and press on the middle using one of the larger shaping tools. Layer the petals together using the hot glue gun making sure to offset them and use a paper piercer to make a hole in the middle and pull through the stamens. Add a little hot glue to the underside of the flower to adhere (watch tutorial). Sponge the petals with dries clear adhesive and sprinkle with Crystal Ultrafine Transparent Glitter and Rajni Chawla's Crystal-Clear glitter.

Stamp the Leafy Accents Cling Stamp Set on the white paper with Ranger Archival Ink Pad - Leaf Green, cut out with the coordinating die, shade use this same ink and shape using mold.

Stamp sentiment using Thank You Sentiments Cling Stamp Set on the piece of paper collection with Ranger Archival Ink Pad - Jet Black and place onto the card using adhesive foam strips. Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

Other Products: Twisted Citron and Peacock Feathers Distress inks, Versamark ink, Wow superfine embossing powder, WOW heat gun, Oval makeup brushes, rhinestones

For more tips on creating with the Dazzling Dahlia Collection watch the tutorial at https://youtu.be/KIIpo2C9oDs.

Instructions: Stamp the images from Dahlia and Leaves Cling Stamp Set on a piece of white cardstock and heat emboss it using Versamark ink, Wow superfine embossing powder and WOW heat gun. Ink it with Twisted Citron and Peacock Feathers Distress inks using Oval makeup brushes. Trim this piece down to 1 1/4" x 5 1/2" and adhere it on a 4 1/4" x 5 1/2" white card base.

Die cut a piece of white cardstock using the die from Decorative Pocket Accents Die and ink it with Twisted Citron and Peacock Feathers Distress inks using Oval makeup brushes. Cut it in the center and adhere it on both sides of the heat embossed and inked piece as shown. Stamp the sentiment from Just For You Sentiments Cling Stamp Set on the bottom right side of the card front using Peacock Feathers Distress ink. Adhere 2 lines of rhinestones on the edge of die cuts to add finishing touch.

Other Products: Altenew watercolors, Brustro green gold brushes, Brustro hot pressed watercolor cardstock, glitter, rhinestones and double sided foam tape

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

Instructions: Cut a piece of 4 3/4" x 6 3/4" piece of pattern paper from Tender Moments Paper Collection and adhere it on a 5" x 7" white card base made with Deluxe Flower Shaping Paper. Trace the design on the top with Designer Dries Clear Adhesive with the Metal Tip attached to the nozzle and sprinkle glitter. Leave it to dry.

Die cut a piece of white cardstock using the die from Decorative Pocket Accents Die and adhere it on the bottom of the card base as shown. Die cut 2 pieces of white cardstock using the dies from Elegant Swirl Gateway Die and adhere them on another piece of pattern paper from the same collection. Adhere it on the card front as shown using double sided foam tape and trim off the excess.

Stamp the images from Welcome Baby Cling Stamp Set and Baby's Friends Cling Stamp Set on a piece of Brustro hot pressed watercolor cardstock and die cut using the matching dies from Welcome Baby Die and Baby's Friends Die. Color in all the images using Altenew watercolors and Brustro green gold brushes. Adhere the Fawn, lamb and bunny stamp on the bottom edge of the card front as shown using double sided foam adhesive. Apply tiny drops of Ebony Black Nuvo Crystal Drops to their eyes.

Die cut 3 more pieces of white cardstock using the 'baby' and 'boy' dies from Welcome Baby Die and adhere them behind the colored piece. Adhere them on the card as shown. Trim the 'welcome' sentiment and adhere it above the 'baby' die cut using double sided foam tape. Apply a layer of 3-D Crystal Lacquer on the 'baby' and 'boy' images. Add a few silver rhinestones to the die cut to add finishing touch.

Other Products: Vellum Paper, Versamark Embossing Ink, Ranger White Embossing Powder, Wow Embossing Powder-Earthtone Blueberry, hot glue, distress ink mowed lawn, hot glue gun, dimensional adhesive, acrylic block, scissors, funnel tray, die cutting machine, Nida Tanweer Magic Glitter Powder, Twine, Lace.

For more ideas on creating with the Special Sentiments Stamps & Dies, watch the tutorial at https://youtu.be/-dYnAWXIH3E.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: For the card base, cut a piece of Deluxe white cardstock to 11 7/8 x 9” size, score and fold in half. Cut another piece of white cardstock size 8 7/8 x 5 3/4” and adhere this layer on card base using dimensional tape. Trim paper from Cottage Garden Collection measures 8 1/2 x 5 1/2 and adhere on to the card base using clear glue.

Cut 1” x 5” strip from pattern paper first then cut another four strips which is smaller than first one. Next trim 5 strips more on pattern paper which is smaller than first set of strips. Cut third set of strips on green pattern paper which is slightly smaller than second strips layer all 3 sets as shown using dimensional tape. Adhere lace on the card base and add those strips on to the card using dimensional tape.

Next, Stamp the sentiment on white card using versamark ink cover with white embossing powder heat it using heat tool, die cut using coordinating die. Add another layer of diecut underneath using clear glue. Cut shadow die of Sending You Birthday Love sentiment on pattern paper and layer underneath the main sentiment. Add this on to the card using foam dots.

For the flowers, Stamp the classic rose stamps on Vellum Paper using versamark embossing Ink cover with white embossing powder, heat using heat tool and die cut using coordinating die. Color using coastal coral Archival ink from the back side in the centers, shape the flowers using shaping mold, finish shaping using shaping kit and make a few flowers. Use hot glue to assemble the flowers as shown. For the center, add some Dries Clear glue and sprinkle with prills. Stamp the leafy accents from leafy accents stamp set with leaf green ink and color with Vivid Chartreuse ink and diecut using coordinating dies. Shade edges with mowed lawn ink. Use the Stack and Store daubers to color the flowers and leaves, Shape the leafy accents in mold, next apply clear glue to the flowers and leafy accents with sponge and sprinkle some Magic Glitter.

Add twine, arrange all ready elements as shown and add nuvo drops to embellish the card.

Other Products: Pearl White Metallic Cardstock, White Cardstock, Diecutting Machine, VersaMark, WOW Metallic Silver Sparkle Embossing Glitter, Archival Ink - Cobalt, Misti, Hot Glue Gun, Blue Gala Glitz

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the Festive Winterscapes Collection watch the tutorial at https://youtu.be/3K3j7I16JBI.

For more tips on creating with the Candlelit Christmas collection, watch the tutorial at https://youtu.be/PJeFD_d3AiM.

Instructions: Card size is 5 x 7”. Cut two pieces of white cardstock 5 1/2 x 7 1/2”. Add 1/2” double sided tape to the top of one of these panels and die cut both using the largest Elegant Swirl Gateway Die. Score the diecut with the tape at 1/2” and adhere the two together to create card base. Using the same die, cut Luxe Silver Cardstock 1x and adhere to the front of the card base.

Diecut the decorative Elegant Swirl Gateway Die 2x, once from white cardstock and once from Festive Winterscapes Paper Collection. Adhere the designer paper to the inside of the card. Using the Cut Mat Create 1A Die, cut sentiment from the designer paper sheet 4A. Ink the edges with Archival Cobalt ink and adhere to the inside. Sponge the Elegant Swirl Gateway diecut with dries clear adhesive and sprinkle with Rajni Chawla’s crystal clear glitter. When dry, adhere to card front. Using the same set, diecut the two smallest dies from silver cardstock and adhere as shown.

Stamp the ‘Merry Christmas’ sentiment from the Festive Winterscapes Cling Stamp Set on white cardstock using Cobalt ink, diecut to size using the banner die from the Arrows and Banner die set. Cut a mat silver banner, adhere the two together, shape and adhere to card base using hot glue.

Stamp the Christmas Poinsettias and Holly leaves on Pearl White Metallic Cardstock using VersaMark, sprinkle with WOW Metallic Silver Sparkle Embossing Glitter and heat set using the Heat It Tool. Add a little cobalt ink to the centers of the poinsettias and holly leaves, diecut and shape using the 3D Christmas Poinsettia Shaping Mold. Press down in the centers of the flowers using the stylus and adhere two flowers together making sure to offset them. Add glue to the centers of the flowers and add Blue Gala Glitz.

Adhere the poinsettias and holly to the card front using hot glue.

Other Products: watercolor markers

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the Candlelit Christmas collection, watch the tutorial at https://youtu.be/PJeFD_d3AiM.

For more tips on creating with the Snowy Pines Collection watch the tutorial at https://youtu.be/nVtKVcgg530.

Instructions: Use HCCB1-495 5" x 7" Gateway Fold Card - White. Bend the sides of the base inwards, then fold them evenly in half. From the paper collection, cut the 3 largest elements from the HCD2-7325 Scalloped Flourish Gateway. Glue the entire element on the middle panel. For the other two panels cut the diecuts in half and glue to the base as shown. From white paper, cut 2 frames from the HCD2-7327 Elegant Swirl Gateway Die set. Glue one to the center of the sheet and cut the other in cut in half and adhere to the front on both sides. From the same set of dies, cut a smaller piece of white paper and a panel from the paper collection with a sentiment on it. Adhere them together, then adhere on the left side of the front as shown.

Stamp images from the HCPC-3919 Snowy Pines Cabin Cling Stamp Set stamp with green ink. Colour with watercolor markers and die cut using the coordinating die. Glue to the center panel.

To create flowers, stamp the poinsettias from Christmas Poinsettia & Holly stamp set on the white paper a few times using Ranger Archival Ink Pad – Leaf Green, color with the same ink using the Stack and Store Daubers-Pack of 30, then die cut using the coordinating dies and shape using the Christmas Poinsettia 3D Shaping Mold. Add white stamens to the center of the flowers. Layer the petals together using the hot glue gun making sure to offset them. To create leaves, stamp the holly from Christmas Poinsettia & Holly stamp set on Deluxe Flower Shaping Paper using Ranger Archival Ink Pad - Leaf Green and cut with the coordinating die. Shape leaves using 3D Christmas Poinsettia Mold. I cover the flowers and leaves with glue and cover them with Rajni Chawla's Crystal Clear.

Arrange everything as pictured and glue with hot glue. Cover some elements with glue and glitter.

Other Products: scissors/paper trimmer, hot glue gun

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

For more tips on creating with the Frame a Card Dies, watch the tutorial at https://youtu.be/K_1152Kd2Ls.

Instructions: Create a 5 x 7” card base using No. 1 of Eyelet Rectangle & Basics Die. Die-cut in purple designer paper from Summer’s Garden Paper Collection No. 2 and No. 5 (scalloped) and die-cut No. 7 in white cardstock and No. 3 in patterned designer paper. Edge all in Archival Majestic Violet. Stamp onto the white mat HAPPY BIRTHDAY to YOU’ in Majestic Violet and mat and layer onto No 4. Mat and layer No. 2 & 3 and adhere to the inside of the card. Mat and layer No. 5 & 7 together and adhere to the inside of the card with dots.

On the front of the card, die-cut No. 2 in pale orange from the Summer’s Garden Paper Collection, edge in Bright Tangelo and adhere. Create a frame using No. 4 plus No. 2 in pale orange which will create an aperture. Adhere a small decorative designer panel from the paper collection behind the aperture and then adhere No. 4 white cardstock behind.

Create the large green scallop frame by die-cutting No. 7 plus No. 5 and the smaller scallop frame by die-cutting No. 8 plus No. 10. Edge the frames in Fern Green. Adhere both frames onto an orange frame by die-cutting No. 6 plus No. 9. Adhere clear card stock behind the green/orange frame aperture and add 3D foam strips to the clear card stock. Sprinkle shaker pieces onto the purple decorative panel prior to adhering the frame over. Adhere this to the front of the card using dots and overhanging the side of the card.

Stamp onto Deluxe Flower Shaping Paper in Archival Red Carnation the Wild Small Rose. Use the daubers to color with Bright Tangelo. Die-cut and color the backs in Bright Tangelo and edge with Carnation Red and Sepia. Place in the mold and spritz with water prior to running through the die-cutting machine. Use the Flower Shaping Tool Kit to cup the centers. Adhere the petals with hot glue and add dries clear to the centers prior to adding prills and glitter.

Stamp onto Deluxe Flower Shaping Paper Leafy Accents in Leaf Green and die-cut with coordinating dies. Color the back of the leaves in Leaf Green and fronts in Leaf Green and Vivid Chartreuse, edge the leaves in Fern Green. Place in the coordinating mold and spritz with water prior to running through the die-cutting machine.

Use a hot glue gun to adhere the Wild Roses and Leafy Accents to the front of the card.

Other Products: Watercolor paint, ribbon, cutting machine, white paper 120g, green paper 120g, brush, gauze

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: Card size is 5 x 7”. Remove one panel from the Gateway Fold Card base. Using the largest die from the Elegant Swirl Gateway Die set, cut paper from the Dazzling Dahlia Paper Collection and adhere to the card front using dries clear adhesive. Using the largest die from the Scalloped Flourish Gateway Die set, cut designer paper x2 and adhere to the inside of the card. Diecut the next two sizes of the Elegant Swirl Gateway Die set from white cardstock and adhere to card front. Diecut the inside die from the same set from Luxe Gold Cardstock and adhere in the center as shown.

Stamp the Large Wild Roses on deluxe flower shaping paper using Archival Jet Black ink, color using watercolor paint, diecut using coordinating dies and shape in the 3D Wild Rose Shaping Mold. Adhere the petals together to form roses. Stamp the Leafy Accents leaves on green paper using Archival Jet Black ink and diecut using coordinating dies. Stamp the Wild Aster Sprays on green paper, color using watercolor paint and diecut using coordinating dies.

Adhere the gauze to the gold arch then adhere the roses, leaves and sprays to the center of the card front. Add ribbon tied in a bow and sequins.

Other Products: White cardstock, Acrylic Shimmer additive, Ivory cardstock, Fun Foam sheet, foam tape, pearls, Copic Markers: R43, R24, R29, YG05, YG17, E51, E50, E53, E21, B41, B21, B24, YG04, Y15

For more tips on creating with the Candlelit Christmas collection, watch the tutorial at https://youtu.be/PJeFD_d3AiM.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Card size: 6 x 6”. Make a folded card to measure 6 x 6” out of ivory. Cut 2 corners of the 12 x 12” design with poinsettias at each corner then glue them together leaving an 1/8” border all the way around card. Cut the Starry Night Decorative die out of ivory and glue it to the center of card. Cut the sentiment from decorative paper using the smallest circle to fit and cut a foam circle the same size. Glue the foam to the back of the sentiment panel then glue it to the center of the card.

Stamp 2 Holly sprays and 1 large Poinsettia candle using black, die cut then color. Stamp Holly with Fern Green, sponge with Leaf Green, die cut and shape in the mold. Stamp Poinsettia with Vermillion, sponge with Carnation Red, die cut then form in the mold. (Sponge both sides of holly and poinsettias). Form the holly sprays a little from the backs. Glue the candle to the bottom left side and glue the sprays starting at the left above the candle and extending around the other side, (the Poinsettia will cover the bottom of the circle).

Glue 2 poinsettia together to form each flower and glue Prills to the centers. To the large poinsettias add some small gold stamen. Glue the flowers around the bottom and 1 at the seem between sprays of holly at the top. Add pearls around the ivory circle and on paper seems (optional). Glitter the flowers and the card.

Other Products: Die cutting machine Cut’n’boss, heat gun, water mister, hot glue gun, hot glue, scissors, Ice stickles Christmas red and diamond, sewing thread, cheesecloth, funnel tray

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the Snowy Pines Collection watch the tutorial at https://youtu.be/nVtKVcgg530.

For more tips on creating with the Candlelit Christmas collection, watch the tutorial at https://youtu.be/PJeFD_d3AiM.

Instructions: The finished card measure 5 x 7". For the base of your card, choose a 5x7" Gateway Fold Card - White With the Scalloped Flourish Gateway die, cut 2 pieces of paper with the biggest die from the sheet #8B, ink the edge of all the paper with the red geranium ink and a dauber. Glue it on the first and on the third card base. From the same kit cut with the second larger die in the paper #6B. Also ink the edge in red and glue in on the first base. Use Ornate florish gateway die to cut in a white cardstock the center of the card and glue it on the first base.

For the second panel, cut a paper from the 6A paper, cut the edge with the Ornate florish gateway die, ink the edge in red and glue it on the base. For the third base make a pocket with a 4 3/4 x 3 1/2” paper (ink the edge). Add a white border made with the second die from the Scalloped flourish gateway die.

Make Poinsettias from the Candlelit Christmas Collection. Stamp your flowers with red geranium ink onto white flower shaping paper, color the centre with red ink. Color the reverse of the flowers and diecut with the coordinating die. Place facedown into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe flower shaping kit tools. Put glue in the center of the flowers and add red stamens. (I used 3 larges petals to make a flower and only two for the smaller). With a sponge, add glue on your petals and put crystal clear glitter on them. Make your holly leaves with the same method by using the fern green ink.

Cut 2 sentiments from your paper. Glue one on the first panel and one on the third with 3D foam to give dimension. Put cheesecloth and sewing threat over your sentiments and glue flowers on leaves over it. Add big stamens to fill the space. Add glitter on your card to give a snow effect.

To add the finishing touch, stamp a cardinal, color with zig markers, diecut and add it to the front of your card! Do the same thing with pinecones branch and add it on your bouquet !

Other Products: White cardstock, Ivory cardstock, Acrylic Shimmer additive, Fun Foam sheet, foam tape, Copic Markers: R43, R24, R29, YG05, YG17, E51, E50, E53, E21, B41, B21, B24, YG04, Y15

For more tips on creating with the Candlelit Christmas collection, watch the tutorial at https://youtu.be/PJeFD_d3AiM.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Card size: 4 x 6”. Cut an ivory card 6 x 8” then fold to 4 x 6”. Cut the outer die of the Regal Frames from decorative red paper. Cut the next die (decorative) out of ivory the oval from decorative green paper and foam sheet then the inside lattice oval out of ivory. Glue the stack in order to the ivory folded card base.

Stamp the lantern and the holly spray using black, die cut and then color. Stamp the poinsettia using Vermillion and holly using Fern Green, sponge flowers with Carnation Red and Holly with Leaf Green, die cut, sponge the backs then shape in the mold (see video). Cut the Christmas Blessings sentiment from decorative paper and fish tail the ends.

Glue 2 flowers together for each poinsettia then glue Prills to the centers. Glue the lantern to the oval center then glue Holly Spray left and over the top of the lantern. Glue the sentiment to the top right of the lantern and glue the poinsettia with holly to each corner. Glitter flowers and card.

Other Products: Scissors, paper trimmer, hot glue gun, brads, lace ribbon, twine, punch

For more tips on creating with the Summer's Garden Collection watch the tutorial at https://youtu.be/-dYnAWXIH3E.

For more tips on creating with the Lush Lilac collection, watch the tutorial at https://youtu.be/KDbdzC0MnAI.

For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.

Instructions: Mat and layer kraft cardstock and a designer paper from Lush Lilac Paper Collection onto a tent fold 6 x 6” card base, distress the edges of the designer paper prior to fixing. Distressing the edges can be done with a distressing tool or scissors. When applying adhesive to die-cuts allow a gap around so you can tuck in other die-cuts as you build the shabby chic/distressed card.

Die-cut Rounded Window Frame Die 2: 5.5” x 5.5” in a pale color designer paper and multiple stamp in Archival Pink Peony ‘I’m thinking of you’ from For My Friend Sentiments Cling Stamp Set. To achieve the effect first ink up the stamp then stamp off onto scrap paper then stamp onto the die-cut. Cut the circle in half and use in two separate areas, one between the first mat and layer and the other start to build the layers.

The topper is made up from Decorative Eyelet Accent 1: 4.75” x 3.75”, Decorative Eyelet Accent 2: 4.25” x 2.75”, Ticket Tag: 3.0” x 1.75” and Eyelet Strip Accent: 4.0” x .5”. Mat and layer all, edging with Pink Peony and a smidge of Sepia. Pull Ticket Tag between fingers to form a curve, thread brads and secure with hot glue in the curved shape.

Tag below topper is made up from Ticket and Tags Die Set, mat and layer designer paper onto kraft tag and topper, reinforce in designer paper, distress the edges and edge in Pink Peony and Sepia Tag 1: 4.25” x 3.0”, Tag 2: 4.0” x 2.5”, Tag Topper: 3.0” x 1.75” and Reinforcement: 2.0” x .5”. Thread lace ribbon and secure with hot glue.

Tag below die-cut from Album Tags and Accents Die Set Large Tag 2: 5.75” x 3.75” in designer paper and use the reinforcements from Ticket and Tags Die Set. Edge in Pink Peony and Sepia. Thread with twine and secure with hot glue.

Die-cut in kraft cardstock together to create a frame and adhere over designer strip from the Lush Lilac Paper Collection Decorative Strip 1: 6.25” x 2.0”. Decorative Strip 2: 5.75” x .5”. Edge in Pink Peony and Sepia.

Die-cut the corners in kraft cardstock and Eyelet Strip in designer paper and white cardstock from Album Tags and Accents Die. Decorative Strip in white cardstock, a designer paper tag and tag toppers from Ticket and Tags Die Set, edge in Pink Peony and Sepia and tuck under other elements. Use a combination of foam pads, strips, and dries clear to achieve various heights on the card.

Stamp onto Deluxe Flower Shaping Paper Leafy Accents in Vivid Chartreuse and die-cut with coordinating dies. Color the back of the leaves in Leaf Green and fronts in Leaf Green and Vivid Chartreuse, edge the leaves in Pink Peony. Place in the mold and spritz with water prior to running through the die-cutting machine.

Stamp in Sky Blue Small Garden Zinnia 3x. for the larger and 1x for each of the small. Use the Deluxe Flower Shaping Kit to curl each petal and cup the centers. Layer the petals with hot glue and poke a hole through the center and thread Bridal Bouquet Stamens. Stamp onto Deluxe Flower Shaping Paper Zinnia Leaves in Vivid Chartreuse, color with Leaf Green and Vivid Chartreuse and edge in Pink Peony. Secure with hot glue.

Stamp in Majestic Violet Lush Lilacs. Place in the mold and mist with water prior to running through the die-cutting machine. Color with a combination of Sky Blue or Majestic Violet. Edge the petals with Pink Peony, pierce the center and thread a pearl stamen through securing with hot glue.

The inside of the card has mat and layer of kraft cardstock and designer paper. Circle topper is Circle 8: 4.25” from Eyelet Circle & Basics Small Die Set in kraft cardstock and Circle 7: 4.0” from Circle Basics Large Die Set. Edged in Pink Peony and Sepia and stamped in Majestic Violet with ‘Birthday LOVE’ from Special Birthday Sentiments Cling Stamp Set. Adhere with Dries Clear.