Other Products: Zutter Bow it all, Organza ribbon, Diamond Stickles, Heat Gun, Misti, Bone folder, Water colouring brush, Paper distressing tool, Scissors, Ruler, Black Archival Ink, Walnut Stain, Peeled Paint Distress inks, Hot glue gun, Fussy Cutting Scissors, Double sided Tape, White drying glue

For EZ tips to create your own warm and cozy winter scene click here

Instructions: The finished size of this tent fold card is 5 1/4" x 5 1/4"(13.5 cm x 13.5 cm) Taking the white card stock make the tent fold card base. The two matting papers are found in the paper collection, blue and green stripes. Cut the first layer a little smaller than the card base, the second about 1/4" (.5cm) smaller than the first matting layer. Ink the edges with the Peeled paint ink then distress the edges.  

Taking the white cardstock stamp and die cut the spruce trees x 3, snowflakes x 4, mistletoe x 4 in Black ink. Bring colour to the greenery die cuts with Peeled Paint Ink and daubers. Add the Red Berry crystal drops to the berries and white drying glue to the spruce for snow and apply the glitter.

Taking again the white cardstock stamp and die cut the window frame x 7 using black ink. Find the small animal winter scene in the paper collection. Cut the scene out so you can make 3 layers between the window frames. Adhere the first 2 window frames to the snow and tree background (There will be two frames between each layer). Arrange the fussy cut trees and animals between each frame layer to make a 3D scene, when pleased with the scene adhere in place. (For a deeper 3D effect you could add 2 extra window frames between the layers) Apply the white drying glue and glitter to the window frame and ledge. 

Make a bow from the ribbon. Arrange and adhere all the embellishments made on to the card matting then card front. To finish apply the diamond stickles to the snowflakes.

Other Products: White card stock, Spellbinders circle dies, Twinkle Dust powder, Rose Madder Archival ink, Pink Peony Archival ink, Jet black Archival ink, Zig markers-Red, Dark green, light green, pale pink, Hickory smoke distress ink, Maroon cardstock

For EZ tips to create your own warm and cozy winter scene click here

Instructions: The finished card measures 8 x 8". Cut a maroon cardstock mat layer at 7 x 7" and adhere to the card front. Cut a designer panel from the Winter's Eve paper collection to 6 3/4 x 6 3/4" and adhere the maroon base.

Stamp and cut the window die using black ink onto white cardstock. Colour with Hickory Smoke distress ink and adhere to the card front as shown with foam strips.

Die cut a Decorative Lattice from the Window Box Elements die, cut vertically and adhere to sides of the window. Cut a tag from the pattern paper with deer design, add to the left corner with foam strips. Die cut snowman sled with coordinating die and adhere with foam strips. Apply glue at the base and sprinkle twinkle dust to give the effect of snow.

Stamp the holly leaves and cardinals in black ink onto white cardstock. Colour them with Archival inks and Zig markers. Shape a little using the Deluxe Flower shaping kit and adhere on the window sides. Die cut a circle from white cardstock and a circle frame from spellbinders die. Add glue and twinkle dust to the frame. Stamp a Christmas sentiment in black ink in center of circle. Adhere to the frame and add to the top right of the card.

Stamp and die cut poinsettia flowers using black ink onto white cardstock and shape with the Deluxe Flower shaping tool kit. Adhere to the card. Add a little sparkle with twinkle dust here and there to get a sparkly Christmas card.

Others Products: Die cutting machine, Spellbinders Fancy Frames 2, Heart of Gold Prills, Stazon Black ink, Bristol cardstock, Zig Clean Colour Brush markers, 041, 047, 026, 091, 031, 028, 067, 040 Hot Glue Gun, Glue Gloss Pen

For EZ tips to create your own warm and cozy winter scene click here

Instructions: To make the base card cut a piece of cardstock at 10" x 7". Score and crease at 5" along the long side and fold in half to make the base card at 5" x 7". Cut a piece of the blue and green striped paper from the HCDP1-281 5" x 7" and adhere to the front of the card base. 

Cut a piece of Bristol cardstock 3" x 4" and stamp the angel and tree image from the HCPC-7149 using Stazon black ink. Colour the images with the Zig Clean Colour Brush markers. Add Crystal glitter to the garlands, star and angel's wings with Dries Clear glue. Add foam strips down each side of the image. Cut a piece of patterned paper 3" x 4" and using the window frame from the HCD1-7148 die cut the rectangle from the front. Adhere to the foam strips on the painted image to create the window.

Stamp the window from the HCPC-3794 in Tuxedo Black on white cardstock, and die cut with the coordinating die.  Adhere to the front of the aperture. Die cut the frame and the filigree die from the HCD1-3794 on white cardstock.  Trim the filigree frame die in half and adhere either side of the window as shown. Adhere the frame to the top of the window as shown. 

To make the window box, die cut the Window Box, and Window Box Border and Flower Arranger die from the HCD1-7150 Die from white cardstock. Adhere the tabs to the box with dries clear glue. Add the flower arranger to the box.  

To make the flowers stamp the images from the HCPC-3795 Window Box Fillers with Tuxedo Black ink. Sponge the flowers with Pearlescent Orchid and Cantaloupe using the Stack & Store sponges. Colour the leaves and stems with Bamboo Leaves. Die cut using the coordinating dies. Apply Crystal Clear glitter to the flowers using the glue gloss. Add the Heart of Gold Prills to the centre of the flowers with Dries Clear glue. Add the flowers and leaves in the flower arranger and glue with Dries Clear glue. When dry adhere to the card at the base of the window. 

Stamp the sentiment from the HCPC-3796 Winter's Eve stamp set using Tuxedo Black ink on a piece of blue paper. Die cut using the Spellbinders Fancy Frame set and adhere to the front of the window box.

 Stamp the poinsettias from the HCPC-3745 Ornate Sleigh stamp set in Pearlescent Orchid on white cardstock. Sponge with orchid ink using the stack & store daubers and die cut using the coordinating die from the HCD1-7104 Ornate Sleigh and Presents die set. Shape using the Deluxe Flower Shaping set, assemble and then add Crystal Clear glitter using Dries Clear Glue. Add Heart of Gold Prills to the centres and add to the top right of the card as shown.

Other Products: Cardstock- White, CTMH Ink (Chocolate, Whisper, Blush), Stickles- Ice Coffee, Beads, Pearls, Burlap String, Scrapbook Adhesives by 3L (3D Foam Squares, E-Z Runner Grand, Adhesive Dots- Micro, White Creative Photo Corners, Thin 3D Foam Squares), Chameleon Pens/Pencil (1702 pencil, RD4, YG3)

Watch the Video on Sparkling Poinsettia

Instructions: The striped pink and blue patterned paper with the pink poinsettias in the corners is your background. Cut a piece of white cardstock that is 3 x 10" and tear both ends on an angle. Then cut that same paper into 1” strips. Adhere to the layout using 3D foam squares. Cut a piece of the pink patterned paper that is 5 x 8.5" and round the corners. Adhere to the middle of the layout also using 3D foam squares. 

Mat your photo in white cardstock and light blue patterned paper. Add white photo corners. Adhere to the middle of the pink patterned piece using 3D foam squares. Find and fussy cut the blue bordered mini journal block. Die cut the pink mini tag using the luggage and tags die. Adhere to the left hand side of the matted photo and add burlap string to the mini tag. 

Die cut 2 of the decorative scrolls from white cardstock, and adhere to the top and bottom of the pink patterned paper using mini glue dots. Add pearls as shown. Die cut 2 of the decorative corners from white cardstock and adhere to the top right and bottom left hand corners of the layout using mini glue dots. Add pearls as shown.

Stamp and die cut 1 of the small holly clusters using black ink onto white paper. I added colour first with the dark green coloured pencil for shading, then added colour using my Chameleon pens. Add 3D Crystal Lacquer to just the holly berries and let dry. Shape and adhere to the right hand side of the matted photo.

Stamp and die cut 2 sets of the Sparkling Poinsettia images using light grey ink onto white cardstock. Add colour to your flowers using pink ink and daubers. Shape and assemble your flowers. Using 3D Crystal Lacquer add beads to the middles of all of your flowers. Let dry. Add Stickles to the tips of all of the petals. Let dry. 

Adhere your finished flowers to the top left and bottom right hand corners of the layout. Then add another small flower with your holly that you already added. Stamp your sentiment/title using brown ink to the lower left of your matted photo.

Other Products: White Stemans, Blue Pearlized Cardstock, White Cardstock, Heat Tool, Versamark Embossing Ink Pad, 3d Foam Pads, Die cutting Machine. Minnie Pearl Prills

Watch the Video on Sparkling Poinsettia

Instructions: Finished size is 6 x 6" card. Cut white cardstock to 6 x 12". Score and fold at 6". Cut 2 coordinating panels from the paper pad one 5 3/4 x 5 3/4" and the other 5 1/8 x 3 7/8". Mat each panel 1/8" larger using blue cardstock and adhere together. Take the square panel and adhere directly onto card base. Use foam pads to adhere smaller panel onto card front to create a 3D effect.

Die cut two flourishes from the Window Box Element Dies out of the blue cardstock and glue to the top and bottom of your center panel.

Stamp Sparkling Poinsettias onto blue pearlized paper using Versamark Embossing ink and emboss using white embossing powder. Heat set. Die cut using coordinating die and shape using Deluxe Flower shaping Kit. Using white foam paper, die cut, shape and place stamens into the center Add Dries Clear glue to the tips of the stamens and add prills. Allow to dry before adding these to the top left side of your card using Dries Clear glue.

Finally chose a sentiment of your choice, cut and add an 1/8" mat from blue pearlized cardstock. I added a foam pad between the sentiment and the mat. Add sentiment to card front as shown.

Other Products: Paper: Neenah Solar White, Recollections White, aqua; Inks: Onyx Black VersaFine, Quick Quotes Blue Lagoon; Accessories: Spellbinders Large Labels, Bow-Easy Tool, Peacock Seam Binding, Clear Wink of Stella, Xyron Machine, Scotch Mounting Tape, glue dots, pop dots, adhesive pearls, mineral spirits, paper stumps, Prismacolor Pencils: Metallic Silver, Black, Crimson Red, Prussian Green, Light Umber, Chocolate, Espresso, Cloud Blue, Sky Blue Light, Peacock Blue, Deco Pink, Mulberry, Pink Rose, Pink Cream, Light Peach

For EZ tips to create your own warm and cozy winter scene click here

Instructions: Card measures 4 1/4" x 5 1/2". Cut white cardstock 11" x 4 1/4", score at 5 1/2" and fold to make card base. Cut pink designer paper 4 1/16" x 5 5/16". Die cut center of card front and pink mat with window die from the Window Frame Die. Adhere pink mat to card front.

Stamp angel and tree image from Winter's Eve Set on Solar White with Onyx Black. Color with pencils and mineral spirits and die cut with Large Labels Die. Add image behind window (inside of card) using thin pieces of SMT. 

Die cut medallions from Window Box Elements Die with white. Cut larger medallion in half. Run all 3 pieces through the Xyron Machine to apply adhesive and add as pictured around window opening.

 Stamp window from Window Frame Set and flowers from Window Box Fillers Set on Solar White with Onyx Black. Color with pencils and mineral spirits and die cut with matching dies from Window Frame Die and Window Box Fillers Die Sets. Glue outside of window over window opening. Add window pane over opening using SMT. Die cut small medallion from Window Box Elements Die using aqua cardstock, ink edges with Blue Lagoon and glue on bottom of window as shown. Shape flowers with Deluxe Flower Shaping Kit and glue in window.

Die cut sentiment from Winter's Eve Designer Paper using Luggage and Tags Die Set, ink edges with Blue Lagoon and add as pictured using glue and a glue dot. Make a 3-loop bow with Peacock Seam Binding using Bow-Easy Tool and add as pictured using glue dots. Add half back pearl to bow center. Add Clear Wink of Stella to flowers.

Other Products: Pastel Blue Card Stock, White Card Stock, Archival Watering Can Ink Pad, Pebbles Metallic Cream Chalks, Ice Blue and Pink Glitter, Quickie Glue Pen, Versamark, Blue Tinsel Embossing Powder, Distressed Inks (Peeled Paint, Walnut Stain, Salty Ocean and Lipstick Red), Deco Art Snow Writer and die cutting machine

For EZ tips to create your own warm and cozy winter scene click here

Instructions: Start by creating your Center step card out of white card stock with panels from the Winter's Eve Paper Collection. For a tutorial on how to make a Center Step card click here (www.splitcoaststampers.com).

The image of the little girl looking at the Christmas tree inside the window was stamped on white card stock using Watering Can ink and colored with Pebbles Metallic Cream Chalks before accenting with a quickie glue pen and a combination of Ice Blue and Pink glitter.

The window was stamped on white card stock using Versamark and heat embossed with Blue Tinsel Embossing Powder before die cutting with the matching dies. Die cut the window box out of white card stock and then stamp the Christmas Blessings sentiment directly on the already die cut window box using Versamark and heat embossed with Blue Tinsel Embossing Powder.

The Poinsettia flowers were stamped on white card stock using Watering Can ink and die cut with the matching die before coloring with Pearlescent Coral and shaping with the Deluxe Flower Shaping Kit and accenting with Rajni Chawla's Crystal Clear. The Leaves were stamped on White card stock using Northern Pine and die cut with the matching die before coloring with Peeled paint and shaping with the Deluxe Flower Shaping Kit. The sled and branches were stamped on white card stock using Rich Cocoa and die cut with the matching die before coloring with Walnut Stain for the branches and a combination of Walnut Stain, Salty Ocean and Lipstick Red inks for the sleigh. Finally a bit of Snow Writer was added for some dimension as shown.

Other Products: Westcott Brand Trimmer/Scissors, Copic Sketch: G21, G24, Jewelry Box

For EZ tips to create your own warm and cozy winter scene click here

Instructions: Take your patterned paper and cover the entire jewelry box, adhere using dries clear glue. Once complete you will fussy cut the deer, two sentiments and the poinsettias from the Winters Eve collection. You will use one sentiment and the fussy cut deer on the inside of the box. Score and fold bottom paper of deer. Glue folded part to music box. The fussy cut poinsettias will be shaped into 3D flowers. Cut a total of 6 flowers from the paper, add glue and then apply some of the Crytal Clear along the edge of each flower petal.  

Stamp leaves from the Window Box Fillers HCPC-3795 and Window from HCPC-3794 and diecut with coordinating dies. Color using Copic markers. Shape using Deluxe Flower shaping Kit. Die cut window box from designer paper and window box border from white cardstock. Fold tabs for window box and adhere together using dries clear glue, creating the shaped box. Adhere border to window box. 

Adhere Window directly onto front of Music Box. Arrange all pieces as shown and adhere.

Other Products: Cream cardstock, archival Ink-black, diamond dust, papericious twine-teal blue, beads-golden, Zig Clean Color Real Brush- pink, tea rose, red, pale green, light green, dark brown

Instructions: Take a cardstock size 7” x 14” and fold it to half(top fold). Final size is 7” x 7”. Cut a pattern paper from Winter Eve Collection which is 1/8" smaller than the cardstock and distress the edges. 

Die cut two of each of Window Box Elements Lattice Flourish and Scroll Border from Cream cardstock. Next choose another pattern paper panel. Create a cream cardstock mat an 1/8" larger than panel and adhere these two pieces together. Adhere it with the foam dots to give dimension. Add Cream Lattice Flourish on either side of the 3D panel. Fussy cut the snowman sled image from the patterned paper and create a embellishment by adding dries clear glue and diamond dust and adhere it using foam to give more dimension.

Stamp Window Box Elements using archival ink-black onto white paper and diecut with coordinating die. Color with Zig Clean Color Real Brush and shape them with Deluxe Flower Shaping Kit. Add golden beads using dries clear glue at the centre, add more adhesive and sprinkle with Crystal Clear. Stamp Festive Holly and Cardinals and color with Zig Clean Color Real Brush, die cut with coordinating die. Shape using the Deluxe Flower Shaping Kit. 

Die cut ticket sentiment and chapel tag using Luggage and Tags die. I added more fussy cut pieces from Winter's Eve paper collection. Arrange as shown and adhere using dries clear Adhesive.

Other Products: Hot Glue Gun, Pine Needle Distress ink, Crushed Olive Distress ink, Vibrant Fuchsia Archival ink, Sunflower Archival ink, Black Archival ink, Plum Archival ink

For EZ tips to create your own warm and cozy winter scene click here

Instructions: The final card measures 7.5" x 4". Take three pieces of  white cardstock that measures 7.5" x 4". Score and fold two pieces at 3" and 3.5" to create the folds on wither side. Adhere these two side panels on the back of both sides of your third 7.5" x 4" panel to create a gate fold card being a 1/2" deep.

Cover each section, front and back with designer paper from the Winter's Eve paper collection. I did two layers with 1/8" difference. Adhere all the designer paper onto the white cardstock using dries clear glue. 

For the window frame on the inside, using white cardstock die cut window pane, decorative lattice (cut in half vertically), flower arranger, three decorative top pieces, and three window box borders. Cut a scene from designer paper and adhere to center. Die cut Window Frame using a gray paper from paper pad to layer on top of window. Arrange window as shown and adhere using dries clear glue. 

On the side panels cut designer paper to create pockets, on each pocket glue white Window Box Border before adhering glue only to three sides creating the pocket. Fussy cut journaling tags and sentiments from paper collection for each pocket.

For the Window Box, use the coordinating die from the HCD1-7150 Window Box Elements Die and the coordinating paper from the paper collection. Fold tabs on score lines and adhere using dries clear glue creating the box shape. Adhere Flower Box Border to top of flower box and fold flower arranger on score lines and adhere one side to inside of window box. 

Using archival black ink stamp and die cut many pieces from the HCPC -3795 Window Box Fillers Stamp Set. Using Pine needles, Crushed Olive, Vibrant Fuchsia and Sunflower Archival inks, color all the filler leaves and flowers. Shape as desired using Deluxe Flower shaping kit and arrange them in the flower arranger and adhere using dries clear glue. Once dry adhere

To close the tri fold card create a belly band from white cardstock that measures 2.5" x 11" and score it at 3", 3.5", 7.5" and 8". Use a coordinating paper to embellish the band, adhere two decorative top pieces, one along top edge and one along bottom edge. Stamp Dogwood flowers in Plum Archival ink on white cardstock and diecut. Color using Vibrant Fuchsia ink and shape using Deluxe flower shaping kit. Arrange belly band as shown using extra pieces from the window box fillers. Adhere using dries clear glue.

Other Products: Gemini die cutting machine, VersaFine Black Ink, white card stock, VersaColor Pine Cone Ink, Yellow Stickles, Glitter Ritz, Distress Embossing Powder - Pumice Stone, heat tool, scissors, paper trimmer, VersaMark Ink Pad, pop dots

Learn how to shape the Sparkling Poinsettia here https://www.youtube.com/watch?v=1INCr0klRIQ

For EZ tips to create your own warm and cozy winter scene click here

Instructions: Create a 6"x 6" card base using a white card stock. Locate 6"x 6" premade card panel shown on sample in Festive Holly Paper Collection. Ink all edges with a light brown colored ink. Using a VersaMark ink pad, ink around edges and into card front and sprinkle with a mixture of vintage embossing powder and glitter. Heat emboss with heat tool and then adhere to card front. Next locate smaller premade card panel within paper collection that features the indoor fireplace scene. Ink all edges with a soft brown colored ink and apply to center of card front with dimensional pop dots. 

Die cut the window frame using white card stock, as well as one decorative window topper embellishment, Window Box border and the window box. Use flower arranger die to die cut center out of window box. Adhere sentiment from paper collection into die cut opening. Ink all edges lightly with a brown colored ink on all window embellishments. Adhere to card base. 

Stamp one inking of the small poinsettia cling stamp set, Poinsettia Leaves, Holly and Cardinal, and several flower and branch images from the Window Box Fillers Cling Stamp Set with a black ink onto white cardstock. Die cut using coordinating dies and then color using Stack and Store Daubers along with Lime Pastel, Rouge, Lipstick Red, Creamy Brown, Olive Pastel, Cantaloupe inks. Shape all elements with flower shaping tools and create window scene as shown on card front. Using a dries white glue, adhere frosting powder to branches, window box and poinsettias. Heat set with a heat tool. Adhere prills to poinsettia centers using a dries clear glue and add yellow Stickles to flower centers in flower box arrangement. 

Other Products: Paper trimmer, Chameleon Pencils Number 2, 9, 10, 14, 17, 18, 19, Stampin' Up Early Espresso ink, ribbon

Instructions: Die cut one gift box with Gift Box and Mini Snowflake Die from Winter's Eve designer paper. Die cut four tags using Snow Kissed Flakes and Tag Die from Winter's Eve designer paper and from white cardstock. Die cut using Window Frame Die one window medallion from white cardstock.

Stamp eight Window Box Filler Flowers and leaves with Stampin' Up Early Espresso ink, diecut with coordinating dies. Color the flowers and leaves using Chameleon pencils numbers 2, 9, 10, 14, 17, 18, 19. Apply Nuvo Crystal Drops Gloss White to left or right corners of tags. Set tags aside to dry.

Assemble box, die cut from white cardstock, and glue window medallion on gift box and arrange one set of each of the different flowers and leaves as shown. After the crystal drops have dried tie ribbon on tags and attach one set of flowers and leaves to each tag.

Other Products: Silver beads, Light Blue Seam binding ribbon, Snowflake stickers, Light Blue cardstock, Silver Washi tape, Bling on a roll, Silver ring, Plastic Diamond, Glue gun, Heat tool, Pearl pen, Gesso, White cardstock, Cardboard, Clear acetate, Vellum, Versamark, Black Archival ink

Watch the Video on Sparkling Poinsettia

Instructions: Please visit my blog for lantern pattern. Cut the lantern pattern 4 times out of cardboard and 4 times of designer paper from the Winter's Eve paper collection and 4 times out of light blue cardstock. Cut out 4 construction strips of 1 x 9 1/2" and fold them in half. Put tape on one back of construction strip both sides of the fold. Now you can connect all the sides with the construction strips. Don’t close the lantern when it is flat, it works easier to have it shaped when adding the last construction strip. Now paint the whole lantern on the inside and outside with Gesso, let it dry. Glue your patterned paper on the front of each panel, cut out the middle but leave an 1/2 inch strip on each side so you can fold it to the inside to cover the edge. Now you can glue the Acetate pieces on the inside of the lantern. Now you can close the lantern and cover the inside with Light Blue cardstock for a nice finish, I also put a strip of silver Washi tape on top of the windows.

Die cut 4 decorative pieces from the Window Box Elements Die from white cardstock and glue them on the outside of each of the clear acetate windows. Glue a strip of the bling on the roll along the window and put some snowflake stickers on the clear acetate.

It is time to stamp, color, die cut and shape some holly and berries. I stamped and die cut 4 of the holly and berry corners in black archival ink. I colored using the holly using daubers and Bamboo Leaves ink. I put some red pearl pen on the berries, let it dry and then put some frosting powder on it and melted that with the heat tool. 

I stamped the poinsettia with Versamark ink and white embossing powder. I embossed it with the heat tool then you color them on the back with the rose bud ink and daubers. Now you can die cut them using the coordinating dies, and shape them with the Deluxe Flower Shaping kit. Assemble using dries clear glue adding stamen in the center. Arrange flowers and Holly as shown and adhere using hot glue.

Make 4 holes on top of each panel and put a ribbon through it. I put a bead on the outside so that the ribbon doesn’t slide through the hole. Now on top you put all the ribbon through a silver ring so that you can hang it. Finally I glued a plastic diamond under the lantern using hot glue.

Other Products: Seedless Preserve, Forest Moss & Mowed Lawn Distress inks, Versamark ink, Wow Metallic Copper Embossing Powder, Ranger Heat-it Tool, Spellbinders Labels 4 die, Ebosser, Martha Stewart scoreboard, white cardstock, pearls & adhesive

Instruction: Cut a 4 3/4" x 6 3/4" and 4" x 6" pieces of pattern papers from Winter's Eve Paper Collection. Adhere them on a 5" x 7" white card base & 4 1/4" x 6 1/4" white cardstock.

Die cut from white cardstock four border die cuts & two ornamental die from Window Box Elements Die. Cut the ornamental die cuts in half. Arrange the die cuts as shown & adhere to the card front.

Stamp the sentiment from Winter's Eve Stamp Set on a piece of white cardstock using Versamark ink & use Wow Metallic Copper Embossing Powder & Ranger Heat-it Tool to heat emboss it. Die cut this piece using Spellbinders Labels 4 die. Adhere it in the middle of the card front using foam adhesive.

Stamp the poinsettia images from Celebrate the Season Cling Stamp Set with seedless preserve distress ink & the leaves with forest moss distress ink. Ink the flowers with same ink & the leaves with Forest Moss Distress ink . Die cut them using the matching dies from Celebrate the Season Die. Shape them using Deluxe Flower Shaping Kit & add Man Go from Bright Ideas Prills to the flower centers. Arrange & adhere everything as shown. Add some pearls to the die cuts for finishing touch.

Other Products: Red cardstock, paper trimmer, glue gun, heat tool, Clear Crackle Paint, Copic Alcohol Ink Markers (Berries, tree trim and rug - R20, R22, R24, R27 R56, Leaves - Leaves and tree - G40, G43, G44, Skin Tones E00, E11, E24, Hair - C3, C4, C5, C7, Dress - B0000, B00, B21, B24, Star - Y11, YR20, YR23, YR56,  Wall paper - E40, E42, B00)

For EZ tips to create your own warm and cozy winter scene click here

Instructions: Card base is a top fold card measuring 5 1/2 x 5 1/2 inches. The base layer was cut at 5 1/4 x 5 1/4 inches and the designer paper was selected from the Winter's Eve Paper Collection. 

The poinsettia's were stamped and cut using the Sparkling Poinsettia Stamp and die set and Desert Sand ink on white cardstock. They were sponged with Guacamole and a touch of Berrylicious fluid Chalk Ink. Then they  were shaped with the Deluxe Flower Shaping Kit. The flowers were assembled and allowed to dry. Clear Crackle Paint was applied to the petals and sprinkled with frosting powder and heat set. Yellow Prills were applied to the center for stamens. 

The holly berries and and focal image were stamped with Memento Desert Sand Ink on white cardstock. The berries/leaves and focal image were colored with Copic alcohol ink. The color combo was - (Berries, tree trim and rug - R20, R22, R24, R27 R56, Leaves - Leaves and tree - G40, G43, G44, Skin Tones E00, E11, E24, Hair - C3, C4, C5, C7, Dress - B0000, B00, B21,  Christmas Balls - B00, B21, B24, B27,  Star - Y11, YR20, YR23, YR56,  Wall paper - E40, E42, B00). 

The window and window shutters were die cut from the Window Fame set on white cardstock. Die cut the window frame 3 times and adhere together for extra strength. Clear cardstock was was cut and adhered on the underside of the window frame. 

Adhere the flowers and holly bush with a glue gun as shown. Darice foam strips were adhered between the focal image and the window frame to create a 3D effect. The frame was then adhered to the card with Designer Dries Clear Adhesive.       

Other Products: Distress Tool

Instructions: Use an A2 white tent fold card. Cut another piece of white cardstock 1/4" smaller than the card base.

Using the distress tool, distress all the edges. Using the sponge apply glue to all the edges and cover with frosting powder. 

Die cut the lattice die from the Window Box Elements Die set. Stamp the sentiment in black ink and die cut with the Cut Mat Create 1B die. Apply glue to both die cuts and sprinkle with frosting powder. Adhere sentiment directly onto lattice die, adhere to card front using 3D foam dots.

Adhere both die cuts with 3D foam pads to the card. Stamp the poinsettia flowers onto white paper using black ink and color with the Berrylicous ink for the flowers and Bamboo Leaves for the holly. Shape using the flower shaping kit. Apply glue over the petals and sprinkle with frosting powder. Adhere prills to the centres of the flowers.

Adhere to the card using Dries Clear glue. Stamp the candle in black ink on white cardstock and diecut with coordinating die. Color with Lady Bug, Northern Pine, Bamboo Leaves, and Cantaloupe for the flame. Finally add glitter where desired and add Nuvo Red Berry drops for the holly berries. Adhere to the card and your project is complete.

Other Products: Distrezz-it-All, White Cardstock, SU Gumball Green Ink pad, SU Real Red Ink pad and marker, Dimensional tape, Double sided Adhesive Sheet, Memento London Fog Ink, sponge, paint brush

For EZ tips to create your own warm and cozy winter scene click here

Instructions: Cut a 5” x 7” card base from white cardstock. Cut two pieces from the green paper in the paper pad 4 7/8” x 6 7/8” and one piece from the light wood grain paper from the paper pad 4 3/4” x 6 3/4”. Distress all the edges. Glue the light paper to the green paper as shown and adhere to the card base using dimensional tape. Adhere the second piece of green paper to the inside. 

Stamp the window with Memento London Fog Ink, die cut using the matching die and ink the edges. Cut double sided adhesive sheet to fit behind the window and adhere. Cut clear cardstock to fit behind window and adhere to adhesive sheet. Sprinkle Crystal Ultrafine Transparent Glitter on the front of the window where the adhesive is and burnish. 

Fussy cut the angel girl and tree from the paper collection adhere to the clear cardstock. Die cut the decorative window dies and adhere to the back of the window frame as shown. Cut a blue backing from the paper pad and adhere to the window behind the tree and angel with adhesive strips. Die cut the candle from the paper pad using the candle die, shape, spray with Sparkle Sheer Shimmer Spritz and adhere to the window sill. 

Adhere the window to the card base using Dries Clear Adhesive. Add Dries Clear Adhesive to the sponge, dab the window decor and sprinkle with Crystal Ultra Fine Transparent Glitter. Paint the snow area on the paper with Dries Clear Adhesive and a paint brush and sprinkle with glitter. 

Stamp the Holly and the cardinals with holly on white cardstock with Memento Tuxedo Black Ink and die cut using the matching dies.  Color the leaves and cardinals using the stack and store daubers and Gumball Green and Real Red inks. Color the berries with Real Red marker. Shape and spray them with Shimmer Spritz. Add Dries White Adhesive to the snow areas on the image and sprinkle with Crystal glitter. Let dry. Adhere the holly and cardinals images with dimensional and dries clear Adhesive.

Other Prodcuts: Canson water color Paper; Coffee Archival Ink; Foam Adhesive; white cardstock. Distress Inks: Peeled Paint; Aged Mahogany; Vintage photo; Wild Honey; Distress Markers to color images inside window: Pumice Stone; Aged Mahogany; Peeled Paint; Antique Linen; Wild Honey 

For EZ tips to create your own warm and cozy winter scene click here

For tips on how to cut intricate dies check out this tutorial.

Instructions: Card base is 6 x 6" with a card panel cut from collection, ink edges with Vintage photo ink. Stamp and die cut the cardinals, holly and berries, and the fillers all on canson water color paper using Vintage Photo ink. I cut apart the flowers from their stems and used them alone on the filler leaves. Color images using Distress inks, shape and adhere prills in centers of flowers. Stamp and color the tree and fireplace image on canson water color using Distress Markers. Cut out fireplace image using paper cutter to fit inside window, fussy cut tree in half and pop on top fireplace image. 

Die cut the window elements HCD1-7150, from white cardstock. Die cut several of the decorative window topper and adhere together to create a thicker piece. Cut decorative lattice piece in half vertically.

Stamp and die cut the window using Vintage Photo ink on white cardstock, cut clear cardstock to fit behind window. Create a 3D effect for the window by foaming the back of the stamped fireplace image with two layers of foam. Place clear window on top using foam. Cover the edges of 3D window with cardstock. Set side to dry. 

Use a Stack and Store dauber to ink window box with Vintage Photo Distress ink. Fold and glue tabs to create the shape of the window box. Ink the edges of window box border using dauber and Aged Mahogany ink. Adhere border directly onto window box. Fold Flower Arranger on score lines and glue one side to the inside of the window box. Tuck leaves in the flower arranger and attach flowers as desired. Also placing some flowers and leaves on upper right corner. Adhere window box under window using dries clear glue. Apply dries white glue on window as shown and sprinkle crystal clear on top to create a snowy effect. Set aside to dry. Assemble card as shown and detail with crystal clear and frosting powders.

Other Products: Spellbinders Circles Die, Memento Dye Ink Pad - Love Letters, Want2Scrap 72 Count - Cranberry Pearls, Ranger Stickles - Yellow, Nuvo Crystal Drops - Gold, Art Glitter Ultrafine Transparent Glitter - Green Briar

Instructions: Create an A2 size card out of white cardstock. Next cut an A2 card front out of the Winter's Eve Paper Collection and die cut the center image using the Spellbinders Circles Die. Sponge outer edge of A2 card front with Rhubarb Stalk Memento Ink and adhere to card base with pop dots. 

Stamp sentiment from the Winter's Eve Stamp Set on center diecut cut circle with Olive Grove Memento Ink. Die cut Holly Candle from the same circle using the coordinating die. Using Dries Clear Adhesive adhere remaining circle image directly to the card base. 

Using small pop dots, cutting to fit as needed, adhere die cut candle image. On white cardstock with Tuxedo Black Ink stamp the candle image from the Window Frame Stamp Set and die cut with coordinating die. Trim off the candle and discard. Color the greenery using Fantastix and a Dove Blender Pen as needed with New Sprout, Bamboo Leaves and Olive Grove Memento Inks and the berries with Lady Bug, Love Letters and Rhubarb Stalk Memento Inks. Shape greenery with the Deluxe Flower Shaping Kit and add to previous candle image with pop dots. 

On white cardstock with Tuxedo Black Memento ink, stamp two small holly berry leaves using the stamp from the Ornate Sleigh Stamp Set and die cut with coordinating die. Color holly berry leaves using the same ink combinations as the greenery with berries. Shape holly berry leaves and adhere as shown. 

With Dries Clear Adhesive add Berry Nice Prills to the holly berries on the design paper, Green Briar Glitter to all the greenery and Crystal Glitter to the yellow scrolls on the design paper. Add Gold Nuvo Crystal Drops to the candle's wax and Yellow Stickles to the candle's flame. Adhere Cranberry Pearl to the upper right hand corner.

Other Products: White Gift Bag, White and Red Card stock,Hole punch

Instructions: Layer your premade white gift bag with a piece of the Winter's Eve Paper 1/4" smaller that your bag. Using some of the red card stock die cut the base for the pocket using the large fleur corner outline die. After snipping the two ends, adhere D-Dots on the back and adhere to the lower left hand corner of the bag, only  applying the dots to the outside corners to create a pocket. Use white cardstock and die cut the large fleur corner, apply glue and some of the Crystal Clear glitter, set aside to dry.  

Use white cardstock and  die cut the Regal Border and Pockets die, apply glue and Crystal Clear glitter, set aside to dry. Using more of the red cardstock cut a piece 5 1/2 x 3", die cut the edges back at the top at an angle to form the tag. Punch a hole in the center. Choose the tag with the sentiment from the Winter's Eve paper collection, adhere to the tag as shown. Add ribbon or cord and Crystal Drops. Adhere the 2 pocket dies you have prepared to the bag. To finish add glitter to the trees and roof top.

Other Products: Red and White Cardstock, Dimensional Tape, Angel Pink London Fog and Dandelion Memento Inks, Vintage Photo, Tumbled Glass and Victorian Velvet Distress Inks, Cotton Ball, ColorBox Mixed Media Ink in White, Bricked Embossing Folder

For EZ tips to create your own warm and cozy winter scene click here

Instructions: My card size is 5 X 7". Make card base out of white cardstock and set aside. Cut a piece of red cardstock to be the next layer. I used an embossing folder called Bricked and ran the red cardstock through my machine to emboss it. Next I took a sponge and added the white ink here and there on the red embossed area to make the brick look a bit worn.  

Stamp and cut out the window frame and the candle element in black ink on white cardstock. I used Memento inks, Northern Pine, Rhubarb Stalk, Bamboo Leaves, Lady Bug and the Dove Blender pen to color the candle and greenery then I used dimensional tape to adhere it to the base of the window.  

Next I stamped the angel and tree in black ink on white cardstock, and colored them using various inks and the Dove Blender Pen.  I cut it out to make it fit behind the window frame and then I used my cotton ball and Tumbled Glass ink to lightly add color to the white cardstock around the image. I just wanted it to have a bit of color and not be a stark white.  

Now die cut out the decorative piece, from white cardstock, to go over the window top and glue it behind the window. Now you are ready to glue the window to the front of the card. Next stamp, color and die cut the sled and use dimensional tape to adhere it to the card front. 

Now just find a sentiment on the paper and fussy cut it to go on the card front.  I rounded the corners and used some ink to distress the edges. Use some more dimensional tape and adhere the sentiment to the card front.

Other Products: White linen cardstock, Dark red cardstock, Spellbinder label die, Cuttlebug Embossing Folder, Star Dust Stickles, 3-M Foam Tape, Copic Markers:R21,R24, R29, R59, E00, E01,E93, BV20, YG03, YG23, YG17, RV000, RV02, RV10, E42, E43, E44, E53, E33, E35, Y00, Y11, Y15, YR23, YR24, Y21, E50, W03, W03, C02, C03, and Inka Gold  

Instructions: Card size: 5 1/2" X 5 1/2". Cut White linen cardstock to 11 X 5 1/2" and score along horizontal edge at 2 3/4" and 8 1/4" (this leaves 2 3/4" ends on both sides, making a gate fold). Use the Decorative Medallion Rectangle shaped outline die on both end pieces. Straight edge should be about 1/4" off the score line (front edge of die should be at the edge of card stock). Use the solid outline part of the die on four pieces of pink designer paper and die cut to cover the outside and inside of flaps. Cut another piece of pink designer paper for the inside 5 3/8 X 5 3/8". Cut a piece of white linen cardstock 5 X 5" and emboss with an embossing folder. Adhere these onto card as shown using dries clear glue.

Die cut an oval from dark red card stock using the Eyelet Oval Outline die. Die cut two Decorative Medallions (the semi-circle looking one) form ivory linen cardstock to layer on top of the red oval. Glue these to the center of the inside.  

Stamp the following in black ink onto white lined cardstock: Winter's Eve fireplace, Christmas Tree/Angel girl, Festive Holly & Cardinals pieces (except lantern), Sparkling Poinsettia (the smallest flowers (X4), and Merry Christmas from Celebrate the Season. Color with Copics (all pieces) and die cut using coordinating dies. Die cut sentiment using the Spellbinder label die.

Fussy cut and adhere fireplace/floor and Christmas Tree/Girl to the inside and add sentiment to the top. Slightly form Holly and Cardinals using the flower shaping kit. Using same flower shaping kit, form flowers and add Inka Gold on petals, leaves and berries. Use a cloth to shine gold. Add gold prills to centers of flowers and Stickles to berries. Adhere berries and flowers to the outside flaps using Dries Clear glue and foam tape as desired.   

Other Products: White Cardstock, Heart of Gold Prills, Dandelion Memento Ink, Aged Mahogany, Vintage Photo and Tea Dye Distress Inks, London Fog Memento Ink 

For EZ tips to create your own warm and cozy winter scene click here

Instructions: My card is 4 1/4 X 5 1/2". Make card base and cover with designer paper from the paper collection. I edged it with red ink using the stack and store dauber. Die cut Window Box Elements (box, border and flower arranger) from chosen designer paper. Fold and adhere as desired.

Next stamp the window in Toffee Crunch ink onto designer paper, diecut with coordinating die. Stamp the image in Tuxedo Black ink. Stamp the Window Box fillers in Toffee Crunch ink on white paper and diecut with coordinating dies. Color all images using assorted Memento and Distress Inks. Shape flower and foliage sprigs using the Deluxe Flower Shaping Kit.

Arrange and adhere pieces as shown, placing the fire place image behind window. Add glitter, prills and Frosting Powder to highlight these. When these are dry, glue on the inside of the window box. Attach the window to the card front and your card is finished!

Other Products: Sleigh  laser cut chipboard from Crafty enjoyments, white cardstock, 3D foam tape, Foamiran, waterproof black ink, red pigment ink, dark green alcohol ink, floral stamens, hot glue gun, liquid glass, white paint, gray paint, puffing snow, red mini berries

Instructions: To see a close up view of this sleigh click here. Use ready laser cut sleigh, from Winter's Eve Paper Collection cut matching pieces and glue it in to chipboard. Assemble and adhere using hot glue. Paint edges with white paint, sprinkle Rajni Chawla's Crystal Clear glitter, add some puffing snow and heat up. Paint reindeer with grey and white paint and sprinkle  Rajni Chawla's Crystal Clear glitter, add some puffing snow and heat up.

Die cut two decorative arches from the Festive Holiday Die collection onto designer paper. Glue the backs together to have the same paper on each side. Adhere this to back of sleigh as shown using hot glue.

To make the red flowers, stamp the flowers from the Classic Rose Cling Stamp Set into white foamiran with black waterproof ink and sponge the stamped images using the daubers with the red pigment ink before die cutting with the coordinating die. Use iron or heat gun to shape flower using your fingers, add some floral red stamens in the center. Sponge the petals with clear quick drying liquid glue, sprinkle Rajni Chawla's Crystal Clear glitter.

To create leaves and holly sprig, stamp leaves and holly sprig with green alcohol ink onto white paper and die cut with the coordinating die and sponge the edges of the stamped leaves to create natural shadow. Adhere mini red berries onto berry sprig. Stamp twig sprig onto white paper using black ink and diecut with coordinating die. Add puffing snow to give a snowy effect and heat set.

Arrange the flowers and leaves over the sleigh as shown. Glue pieces as desired using hot glue gun.