Other Products: Cream Cardstock, paper piercer, hot glue gun, hot glue, water mister, dimensional adhesive, paper trimmer, scissors, die cutting machine, funnel tray

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: Cut a piece of cream cardstock to 8 1/2 x 5 1/2", score and fold at 4 1/4". Cut a piece of light green paper from the Wild Rose paper collection to 4 1/8 x 5 3/8" size. Stamp the wild rose leaf in Fern Green ink around the edges to create a background pattern. Add a touch of Vivid Chartreuse onto the leaf images. Now use the largest and 2nd largest plain oval from Eyelet Oval & Basics Small Die to create an oval border from the same light green paper. Sponge the edges with Fern Green and Vivid Chartreuse ink. Cut the A2 size card front panel from the paper, trim off the green border. Diecut out the center oval with the 2nd largest plain oval. Stamp the ‘Let’s Celebrate’ sentiment in Fern Green ink onto the oval cutout. Lightly sponge over the pink border with Tea Rose ink and use Magenta Hue on the edges. Use a light touch of Sunflower ink and Tea Rose around the edges of the oval cutout. Now lay the green leaf panel onto card base, temporarily attached with tape, and diecut the 2nd largest plain oval from both the card base and green panel. Next adhere the green panel in place onto the card base and pink border on top. Use dimensional adhesive to attach the green oval border. Attach sentiment oval through opening to inside of card.

Stamp the 2nd largest wild rose from HCPC-3907 Large Wild Rose Cling Stamp Set, 3rd largest and 3 smallest sizes from HCPC-3906 Small Wild Rose Cling Stamp Set in Vibrant Fuchsia ink ink onto cream cardstock and diecut with coordinating dies. Stamp the wild rose leaf 3x from HCPC-3907 Large Wild Rose Cling Stamp Set in Fern Green ink onto cream cardstock and diecut with coordinating die. Diecut decorative heart pattern from HCD2-7291 Treasured Heart Gift Box Die in Luxe Gold cardstock.

Use the Stack and Store daubers to color flowers and leaves. Use a light touch of the Sunflower ink in the center and outwards of wild rose petals. Use alternate ink combinations of Tea Rose & Magenta Hue and Rose Madder & Magenta Hue on the edges of petals that will be layered together. Use Vivid Chartreuse on the leaves along with a light touch of Sunflower. Place the petals and leaves into the coordinating wild rose shaping molds and lightly mist with water before sending through diecutting machine. Give edges of petals a little more pinching for shaping effect. Layer petal centers together with Dries Clear glue. Use paper piercer to thread stamens through centers and attach on the backside with hot glue, trim off excess. Finish the shaping of roses with the hot glue to hold petals in the desired shape.

Use hot glue to attach flowers and leaves around the edge of oval as shown. Color remnant stamen wire with Fern Green ink and curl with paper piercer. Attach next to roses. Cut sentiment strip from the paper and sponge edges with Vivid Chartreuse ink. Attach onto card as shown. Cut the gold decorative heart diecut in half diagonally and attach onto the card as shown. Use the Dries Clear glue along with Rajni Chawla’s Crystal Clear glitter to add sparkle over the roses, leaves and rest of card as desired.

Other Products: Martha Stewart scoreboard, white pearl cardstock, glue stick gun, Gallery soft oil pastels 209, 242

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

For more tips on creating with the foam paper & stamens, watch the tutorial at https://youtu.be/Oma6ctVmUD0.

Instructions: Click here to view another photo of this project. Die cut 6 of the box sides using Wild Rose Paper Collection. Score and fold all the lines. Die cut 6 each of the lid panels and the decorative square using Wild Rose Paper Collection and adhere to the panels. Adhere the panels together to create the hexagon box. Diecut 2 hexagon bases and glue one to the inside bottom of the box and other to the outside base. Die cut 6 single decorative hearts and plain hearts using Wild Rose Paper Collection. Adhere the decorative hearts to the top of lids panels and adhere one to the side of each panel. Interlock the box lid flaps and place flowers on the top.

Stamp the Large Wild Rose Cling Stamp Set on foam paper with StazOn Ink Pad - Black Cherry and cut using the coordinating dies. Colour with Gallery soft oil pastels 209 and 242. You will need 2-3 petals for each flower to create flowers. Use an iron or heat gun to heat the petals and when they start to shrink move them on the Molding Mat and press on the middle using shaping tool - using bigger one. Layer the petals together using the hot glue gun making sure to offset them and use a paper piercer to make a hole in the middle and pull through the stamens. Add a little hot glue to the underside of the flower to adhere (watch tutorial). Sponge the petals with dries clear adhesive and sprinkle with Crystal Ultrafine Transparent Glitter and Rajni Chawla's Crystal Clear glitter.

Stamp the leaves using Large Wild Rose Cling Stamp Set on the white paper with Memento Dye Ink Pad - Bamboo Leaves, cut out with the coordinating die, shade using this same ink and shape. Shape leaves using Mold as shown on the video. Adhere the flowers and leaves to card using a hot glue gun.

Fussy cut a sentiment ticket from paper collection and place onto the box using adhesive foam strips. Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

Other Products: Mustard Seed and Wild Honey Distress inks, Twinklets Diamond dust, Holographic glitter, pearls and rhinestones.

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: Adhere a 5 3/4" x 5 3/4" piece of pattern paper from Wild Rose Paper Collection on a 6" x 6" piece of white card base. Take a 6" x 6" white cardstock and die cut it twice using the die from Eyelet Royale Die to make 2 windows as shown. Adhere a piece of Clear Cardstock behind the cardstock. Use Darice Adhesive Foam Strips to make 2 dams behind the 2 windows that we created taking care that there is no gap. Pour a little Twinklets Diamond dust on the card base in 2 places which will be in the middle of the windows and adhere the window panel securely to make the shaker window.

Stamp the flowers from Small Wild Rose Cling Stamp Set and Large Wild Rose Cling Stamp Set using Vibrant Fuchsia and Sunflower distress inks. Die cut them using the matching dies from Small Wild Rose Die and Large Wild Rose Die. Color the pink flowers with Vibrant Fuchsia Archival Ink and Mustard Seed distress ink. Color the yellow flowers with Mustard Seed and Wild Honey Distress inks.

Stamp the leaves from Large Wild Rose Cling Stamp several times on a sheet of Deluxe Flower Shaping Paper with Olive Archival Ink and die cut them using matching die from Large Wild Rose Die. Ink them using Leaf Green, Sunflower and Vibrant Fuchsia Archival Inks.

Shape all the flowers and leaves using Small 3D Wild Rose Shaping Mold, Large 3D Wild Rose Shaping Mold and Deluxe Flower Shaping Kit. Apply a little Designer Dries Clear Adhesive to the edges of flower petals and leaves and sprinkle holographic glitter to add sparkle. Add Go ManGo Prills to the pink flower centers and Pastel Pearl Stamens to the yellow flower centers. Arrange and adhere them as shown. Add few tiny ladybugs made with Ebony Black and Red Berry Nuvo Crystal Drops to the floral arrangement. Add few pearls and rhinestones to the card for the finishing touch.

Other Products: Off white cardstock, organza ribbon, flat back pearl, hot melted glue

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: Click here for more photos of this project. Ready basket measures 6.5” × 5”. First cut 6 pieces of side panels and 1 piece of hexagon base from off white cardstock using gift box die. Glue all pieces and create base of basket. Now take a round object and turn the top panels outside. Cut 1 strip from off white cardstock measuring 1” ×12”. Cut 2 strips of pattern paper measuring 3/4” × 12”. Glue these strips on both sides of white strip. Glue it to create basket's handle. Take a thin strip of gold cardstock and glue it on handle. Cut 6 square pieces from green pattern paper and 6 square pieces from pink pattern paper measuring 2” × 2”. Distress edges with matching ink and glue them as shown. Cut some decorative pieces from off white cardstock and gold cardstock. Glue decorative pieces as pictured.

Cut a border from white cardstock using sweetheart border die. Trim it and glue it on outer flaps as shown. Further, cut 3 piece of Arianna Blooms lace die from white cardstock and glue them on handle. Stamp wild rose flowers using vibrant fuchsia and buttercup ink on deluxe flower shaping paper and cut with coordinating dies. Paint flowers with rose Madder, tea rose and Buttercup ink. Shape with flower shaping mold and Groove tool. Create a rose and some small flowers. Stamp leaves using fern green ink and cut with coordinating die. Paint leaves leaf green and fern green archival. Shape using shaping mold. Arrange flowers and leaves on handle and glue using hot melted glue. Paint some white calla lily stamens with leaf green and vibrant fuchsia ink and glue them. Tie a bow on the handle using organza ribbon. For finished look apply glitter on flowers using designer clear dries adhesive.

Other Products: Hero Arts white pigment ink, Foam Dots, Funnel Tray, Adhesive that dries clear, Paper Distressing tool by Ranger, Leaf Green Distress Oxide, Score Board, Smooth White Cardstock and Die-cutting machine.

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: The ready top fold card from smooth white cardstock measures, 51/2″ by 8″. Choose the pattern papers from the designer paper collection and cut 5″ by 7 1/2″ paper. Next, glue the paper on the white cardstock making a white border of 1/16″ on all sides. Next, add another layer of card panel using coordinating papers and finally layer the card on the ready cardstock using double-sided tapes.

Hand tear the green papers and add two more layers as shown. Add white die-cut border from sweetheart border die for extra interest.

Cut the doily using Rounded Window Frame Die, distress using Aged Mahogany Distress Ink and layer it on the ready card panel as shown. Using Circle Basics die, cut the scene from the designer paper collection and layer it on the inked doily, using foam dots

For the wild roses, stamp the flower petals using Magenta Hue Archival ink and Large and Small Wild Rose Stamp die set and cut them using their coordinating dies. Ink the flowers using Magenta Hue, Cactus Flower and Leaf green and shape them using deluxe flower shaping kit. Once done assembling the flowers, prick the centers of the flowers and add small frosted thread stamens and glue them from the back. For tiny yellow fillers, follow the same steps using the smallest flower from the same collection and Buttercup Archival ink. Once done with the flowers, add Rajni Chawla's Crystal Clear glitter to the flowers for extra interest.

For vellum leaves, stamp 2-3 images with white pigment ink on the vellum, sprinkle white heat embossing powder, dust extras and heat set. Cut the images using a coordinating die set and color them using leaf green distress oxide. Also, shape them using needle tool.

Once all the elements are ready, assemble the card as shown and finish the card by adding a sentiment from the same collection.

Other Products: Scoring board, die cutting machine, white card stock

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: Click here to view anohther photo of this project. The card is a shutter fold card. Score all the lines very well on the card and cut out pattern paper from paper collection for the inside centre fold of the card. Choose any 6” by 6” card panel and cut off the corners in a rounded way. Adhere to the centre of the card. Cut out two die cuts from gold paper using the rounded eyelet die set. Adhere the two shutter flaps together on the card front. Using the rounded eyelet die cut out design on the two flaps. Adhere the gold die cuts on the front coinciding with design on the flap. Cut out two more die cuts from the pattern paper and adhere on the inside of the card. Cut die cuts from gold paper with Elegant packet accents die and add to the inside of the card.

Cut out an oval frame from the basics oval die using the luxe gold paper. Cut out an oval from white card stock and from gold paper. Stamp the sentiment on the white oval die. Adhere the gold frame and top. Adhere the gold oval die cut at the back. Attach this whole piece on the card front.

Stamp many images of the big and small wild rose on deluxe flower shaping paper with Plum archival ink. Colour with Archival inks. Stamp the leaves in Library green ink. Colour the leaves. Cut the flowers and leaves with matching die and give them shape in the 3D flower shaping mold for the wild rose flowers. Add stamens in the centre of the flowers.

Arrange the flowers and leaves on the card front. Add gold ribbon bow. Decorate the card with window hinges. Add more flowers inside the finish the card.

Other Products: White cardstock, yellow ribbon, shimmer gloss, Pearls, Copic Markers: E53, E33, E35, E39, RV000, RV10, RV02, Y11, Y15

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

For more tips on creating with the border dies & foldout cards, watch the tutorial at https://youtu.be/wxX94X84kUo.

Instructions: Click here to view more photos of this project. Card size: 5 1/2 x 5 3/4". Cut decorative paper for each panel, front and back (see video). Cut white borders for 3 panels, cut 1 small Elegant Pocket Accent (this will go at the top on back panel). Cut 2 small white Fleur Borders and Pocket and 1 large Fleur Borders and Pockets. Cut 2 white eyelet hearts and cut 1 white small inside of Regal Frame and Accents for 1 of the sentiments.

Cut out 5 tags from the sheet of tags that comes in the paper pack. Tie yellow ribbons at the top of each tag. Stamp and die cut the swans and the scroll using black ink then color with Copic Markers. Stamp the sentiments “It must be love” and “congrats” using black. “The It must be love” is stamped on the heart and the “congrats” is stamped on decorative paper that is then die cut with the small inside of the Regal Frame and Accents die.

Stamp the blossoms with Magenta Hue and with Buttercup, sponge then die cut and shape in the molds. Glue 3 layers of blossoms together for the large flower and 2 layers for the other flowers, pierce then insert small stamen. For the largest 2 flowers glue pearls in the center, for the other flowers, insert a medium stamen. Stamp leaves with Fern Green, sponge with Leaf Green, die cut and shape in the mold. Cut 2 green decorative paper Swirly Borders and 1 Swirly Border from flower decorative paper. Now it is time to decorate the card.

Glue corresponding papers to their card panels and glue the borders at the top cutting off excess. Glue the Elegant Pocket Accent onto the top of the back panel. Glue large Eyelet Heart under back border then glue the smaller Eyelet Heart with the sentiment on top. Glue the swans under the sentiment. Glue 2 flowers and leaves to the top right side.

Next panel, glue right side and bottom of the large Fleur Pockets and Accents to the right side (leave top open for 3 of the 5 tags).

The 3rd panel in from the back has a small Fleur Pocket glued to the right side (glue only bottom and right side). Also glue one of the green Swirly Borders on. Glue a flower at the top right side. Insert 1 of the tags into pocket.

Last little panel, glue the congrats with white frame to the right side, part of a green Swirly to the left side and a flower to the left side.

Front of little last panel, glue the scroll to the left side, the rest of the green Swirly to the right side and glue 3-4 flowers with leaves all around.

The last panel to decorate can only be seen when the card is closed. The back side of the panel closest to the back. Glue the flower paper Swirly to the right side and the last small Fleur Pocket to the left side (Glue left side and bottom only). Insert the last tag then glue 2 more flowers with leaves to the top left.

The last thing to do is glitter all the flowers with Rajni’s Crystal Clear and glitter all panels with Ultrafine Crystal Transparent, gloss all leaves with shimmer gloss.

Other Products: Heavy cardboard, white cardstock

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.

Instructions: Cut a piece of white cardstock 12” x 6”, score at 6” along the long side and fold to create a base card 6” x 6”. Cut a piece of rose flower patterned paper 2 1/2” x 6” and adhere to the front of the card 1” from the bottom of the card. Cut the green patterned paper 2 1/2” x 6” and 1 1/2” x 6”. Cut a piece of clear cardstock 2 1/2” x 6” and adhere to the back of the strips of paper to create a card front 6” x 6”. Adhere to the card front with heavy cardboard.

Cut three decorative window dies from the HCD1-7291 Treasured Heart Die set out of gold cardstock and adhere to the clear cardstock strip. Die cut two lace edge strips from the HCD1-7161 Sweetheart Borders Die set out of gold cardstock and adhere to the edges of the window as shown.

Stamp the sentiment from the HCPC-3847 Celebrate Love Sentiment Stamp set in Cactus Flower ink on the green patterned paper. Die cut the ticket out using the tag die from the HCD1-7201 Ticket & Tags Die, sponge around the edges with Cactus Flower ink and adhere to the bottom left as shown.

Stamp the flower images from the HCPC-3906 Small Wild Rose Stamp in Magenta Hue ink on Deluxe Flower Shaping Paper. Colour with Magenta Hue and Tiger Lily ink sand die cut with the coordinating die. Sponge the edges with Plum and Magenta Hue inks and shape using the coordinating mold. Add Frosting Powder using Dries clear glue on a damp sponge. Adhere to the left around the tag and the top of the window as shown.

Stamp the leaf image from the HCPC3907 Large Wild Rose Stamp set in Fern Green ink on Deluxe Flower Shaping Paper. Colour with Leaf Green and Fern Green inks and die cut with the coordinating die. Shape using the coordinating mold and add Crystal Clear glitter with dries Clear glue on a damp sponge. Adhere around the flowers as shown.

Stamp the leaf images from the HCPC-3835 Leafy Accents Stamp set in Library Green ink on Deluxe Flower Shaping Paper. Colour with Leaf Green and Magenta Hue inks and die cut with the coordinating die. Shape using the coordinating mold and add Crystal Clear glue on a damp sponge. Trim and adhere around the leaves and flowers as shown.

Other Products: Small foam dots, die cutting machine, white cardstock

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

For more tips on creating with the Window Scene cards & dies, watch the tutorial at https://youtu.be/LnM95GR92ao.

Instructions: Click here to view aother photo of this project. Cut the pattern papers from the Wild Rose paper collection and glue on the insides of the 6 x 6” Swing Fold Card. Cut a round 6 x 6” Window scene circle using the outer circle die from the Rounded Sunlight Window die and glue on the card front.

Die cut several of the leaves out of white card stock using the 1B Cut Mat Create die. Use the Album Tags and Accents die, cut 2, stamp the sentiment on the smaller of the 2, use foam dots, adhere together and add to the bottom 6 x 6”.

Stamp the leaves on the Deluxe Flower shaping paper with the Emerald green ink, color in with the Viridian ink, cut out with the coordinating die, ink the edges with more of the Emerald green, place in the mold and run through the die cutting machine.

Stamp the flowers on the Deluxe flower shaping paper with the fuchsia ink, cut out using the coordinating die, place in the mold. Stamp more of the flowers with the Sunflower ink, cut out, place in mold and run through the die cutting machine. Adhere all the flowers and leaves to the card as shown. To finish, add glitter to the house, flowers and leaves. Add prills to the center of each flower.

Other Products: Cardstock (White), Paper Distresser, Burlap String, Beads, Scrapbook Adhesives by 3L (Crafty Foam Tape, E-Z Runner Ultra, Adhesive Dots Small, 3D Foam Squares), Stampin Up Ink (Old Olive, Always Artichoke, Berry Burst, Baroque Burgundy), Close To My Heart Ink (Blush, Gold Rush)

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: Click here to view a larger photo of this layout. Layout is 12 x 12”. The light green patterned paper with the floral frame is your background, but you will need both sheets. Cut 2 squares of the burgundy patterned paper that are 4” and cut them in half diagonally. Add a triangle to each corner of the background patterned paper. Fussy cut out the floral frame from the other sheet of patterned paper and adhere to the background using foam tape. Mat the 4 x 6” photo in white cardstock that is distressed. Then mat that in the pink plaid patterned paper. Die cut out one of the large lacy circles from the Rounded Window Frame Die set from white cardstock. Adhere this to the right of the middle of the layout and adhere the matted photo to the left of the middle of the layout using foam tape. Find and die cut out the tags used and add a burlap string bow to the top of each. Adhere at the top of the matted photo. Find and cut out the “Life's Beautiful Moments” sentiment and flag one end. Adhere to the right of the matted photo using foam squares.

Stamp and die cut 2 sets of each of the flower sizes in 2 colors (Baroque Burgundy and Berry Burst) onto Deluxe Flower Shaping Paper. Add color to the darker stamped flowers using Berry Burst Ink and daubers. Add color to the lighter stamped flowers using Blush and daubers. Add yellow (CTMH- Gold Rush) to the middle of all of the flower pieces using daubers. Stamp and die cut 2 sets of the swirly leaves from Leafy Accents using dark green ink (Old Olive) and add lighter green color (Always Artichoke) using daubers.

Shape the leaves and flowers using the coordinating 3D Shaping Molds. Assemble the flowers and add Prills to the middle of each using a liquid adhesive. Let dry. Add the larger flowers to the right and left of the matted photo. Then start adding the smaller flowers across the layout. Lastly, add the leaves around some of the flowers.

Other Products: White cardstock, Silver stickle, Memento Ink – angel pink, Foam tape

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

For full instructions for this project watch the tutorial at https://youtu.be/m2kzKtCG_C0.

Instructions:  Click here to view more photos of this project. To make this beautiful box, cut six pieces of the HCD1-7291 Treasured Heart Gift Box Die on the Luxe Gold Cardstock. Then cut one piece of the hexagon base. Assemble the box together by gluing the hinges together and to the base.

To add closure to box, make two holes on opposite sides to add the ribbon.

Use the HCPC-3907 Large Wild Rose Cling Stamp Set and the HCD1-7290 Large Wild Rose Die to cut the flower petals. Then, use the HCFB1-487 Large 3D Wild Rose Shaping Mold to shape the flowers. Put the flower together by adding foam tape in between the petal layers. Insert the stamens on the center of the flower and add the silver stickles.

Other Products: Foam tape, Distress Oxide inks – Picked Raspberry, Spiced Marmalade, Lucky Clover, Twisted Citron, spray adhesive, white cardstock, Hero Arts Embossing and Watermark ink, Art Glitter

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

For more tips on creating with the booklet frame dies, watch the tutorial at https://youtu.be/kJO5LdNFxgE.

For more tips on creating with the Window Scene cards & dies, watch the tutorial at https://youtu.be/LnM95GR92ao.

Instructions: Cut a piece of white cardstock 10” x 6 1/4", score at 2 1/2” x 5” along the long side and fold to create an easel card. Die cut the base end with the outer edge die from the HCD1-Swirly Accents Spray Die set. Die cut the base from the HCD1-Swirly Accents Spray Die set out of white cardstock using the inner and outer plain edge dies. Die cut the decorative die from HCD1-Swirly Accents Spray Die set out of white cardstock. Add Frosting Powder using spray adhesive and then adhere to the die cut end of the base of the easel card.

Die cut the ornamental tag die from the HCD1-7203 Ornamental tags die set out of white cardstock and add Frosting Powder to the decorative edges with Dries Clear glue on a damp sponge. Stamp the image from the HCPC-3848 Cheerful Notes Sentiment Stamp set in Hero Arts Embossing ink and heat emboss with gold embossing powder. Die cut the sentiment using the inner matching die from the ornamental tag and then adhere to the front of the ornamental tag. Adhere to the base with foam tape.

Cut a piece of white cardstock 6 1/4" x 5” and die cut one end using the outer edge die from the HCD1-Swirly Accents Spray Die cut the lattice window die out of white cardstock using the outer eyelet edge and inner lattice die. Add Frosting Powder using spray adhesive and then adhere to the plain edge of the card. Die cut the base from the HCD1-Swirly Accents Spray Die set out of white cardstock using the inner and outer plain edge dies. Die cut the decorative die from HCD1-Swirly Accents Spray Die set out of white cardstock. Add Frosting Powder using spray adhesive and then adhere to the die cut end. Adhere to the top of the easel.

Stamp the leaf images from the HCPC3907 Large Wild Rose Stamp set in Hero Arts embossing ink on vellum and heat emboss with the white embossing powder. Colour on the front of the images with Twisted Citron and Lucky Clover inks and die cut with the coordinating die. Shape using the coordinating mold and add Crystal Clear with Dries Clear glue on a dry sponge. Adhere to the front of the card as shown starting from the top left and work over the bottom right and on the right of the label on the base of the easel.

Stamp the images from the HCPC3907 Large Wild Rose Stamp and the HCPC-3906 Small Wild Rose Stamp sets in Hero Arts embossing ink on vellum and heat emboss with the white embossing powder. Colour the front of the images with Picked Raspberry and Spiced Marmalade inks and die cut with the coordinating die. Spritz the back of the images with water and shape using the golf tools. Add Ultrafine Crystal glitter using Dries Clear glue on a dry sponge and Heart of Gold Prills to the centres. Adhere over the leaves as shown.

Other Products: Watercolor paint, glue, twine white, hot glue, ribbon, white paint, gold balls, brocade paste, scissors.

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: Click here to view a larger photo of this project. From the pale pink paper of the collection, cut out 6 sides of the large box and the bottom. Cut out smaller windows at the same time. From purple patterned paper, cut out larger windows and glue to the outside of the box. Draw in pencil on white tracing paper larger windows, cut with scissors and fit inside the box. Glue all the parts together, leaving the bottom to the end.

Stamp the Wild Rose on the Deluxe Flower Shaping paper. Use many petals in different sizes. Die cut with the coordinating die. Paint with watercolor paint in intense color and shape in the mold. Prepare a layered flowers, roses and buds. Add green petals of Purr-fect Posies to buds and roses. Glue the formed petals together. Stamp the Wild Aster Spray on Deluxe Flower Shaping Paper and die cut with the coordinating die. 

Stamp the leaves with Ranger Archival Jet Black ink on Deluxe Flower Shaping paper. Apply green ink using the dauber. Die cut with the coordinating die and shape in the mold. Place the leaves as shown. Gently apply white paint and brocade paste to the edges of the flower and leaves. Decorate the flower centers with a golden ball or other ornament (stamens).

Cut out a circle as a base and arrange a floral composition on it. To the base of the circle, paste the protruding fragment of the ribbon for convenient opening of the box. Create a composition of leaves and layered flowers. Apply to the Wild Aster Sprays. Add ribbon and twine to the side. Cut out a decorative label and combine with hearts hung on twine.

Decorate the box with small decorative pearls.

Other Products: Watercolor paint, glue, twine white, ribbon, white paint, brocade paste, gold balls.

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: Click here to view a larger photo of this project. From the pale pink paper of the collection, cut out 4 sides of the small box and adjust the bottom. Cut out smaller windows and hearts at the same time. From purple patterned paper, cut out larger windows and glue to the outside of the box. Draw in pencil on a white tracing paper larger windows, cut with scissors and fit inside the box. Glue all the parts together, leaving the bottom to the end.

Prepare a layered flower: Stamp the Wild Rose on the Deluxe Flower Shaping paper. Use 4 petals in 2 sizes. Die cut with the coordinating die. Paint with watercolor paint in intense color and shape in the mold. Glue the formed petals together.

Stamp the leaves with Ranger Archival Jet Black ink on Deluxe flower Shaping paper. Apply green ink using the dauber. Die cut with the coordinating die and shape in the mold. Place the leaves as shown. Gently apply white paint and brocade paste to the edges of the flower and leaves. Decorate the center with a golden ball or other ornament (stamens).

Create a composition of leaves and 1 layered flower. Apply to the branches cut from green paper of the Wild Aster collection. Pull the ribbon through 2 holes from cut hearts. Tie a bow. Add twine to the side and 2 decorative hearts hung on twine.

Decorate the box with small decorative pearls.

Other Products: White cardstock, foam tape

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Create a 6 inch x 6 inch card base. Cut 6 x 6” dark green piece from the Wild Rose Paper Collection and adhere to card base. Cut out the 6 x 6” frame panel with circle, cutting off the green portion, cut out the center circle with the Circle Basics Large Die and cut out a larger mat in dark pink with the circle die from the Courtyard Elegance Die and distress all with Lilac Posies. Cut out the doily with the Rounded Window Frame Die. Mount the smaller floral circle with foam tape on the darker pink mat, adhere these to the doily and then to the cut down 6 x 6” square, add foam tape to this layer and then adhere to 6 x 6” green card base.

Stamp the flowers from the Small Wild Rose Cling Stamp Set in Lilac Posies and sponge with Bamboo Leaves and Lilac Posies, cut out with coordinating dies, sculpt with the Small 3D Wild Rose Shaping Mold, add stamens and glitter.

Stamp the leaves from the Large Wild Rose Cling Stamp Set in Olive and sponge with Bamboo Leaves, cut out with corresponding dies and sculpt with Large 3D Wild Rose Shaping Mold.

Cut the sentiment from the paper collection and distress with Lilac Posies ink, adhere with roses as pictured.

Other Products: White card, hot glue gun, Ranger Distress Ink – Victorian Velvet, Bone folder, Ranger Archival Chrome Yellow ink

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: Click here to view another photo of this project. Take the Treasured Heart Gift Box Die and cut six plain side pieces in white card. Cut two hexagonal die pieces in white card. Burnish all the flaps on the gift box die pieces with a bone folder. Using Dries Clear Glue, adhere the base flaps to the hexagon die cut piece. The flaps go underneath. Glue all the side flaps to the inside of the box, one at a time. Adhere the second hexagon die piece to the base to hide all the flaps. Allow to dry.

Take one of the pretty papers and the small half oval die from the Gift Box die set. Die cut six of these for the flaps for the lid. Adhere to the top of the lid with Dries Clear glue. Cut out six 2.2 inch squares in the same pretty paper as you used for the lid. Adhere these to the sides of the box. Take the decorative center square die, die cut six in white card, adhere these to the front of each side panel.

Die cut six solid double hearts in dark pink paper from the paper collection pad. Die cut six of the decorative double hearts in white card. Glue together in pairs just in the center of each die cut. Adhere to the center of each side panel.

Using Heartfelt Flower Shaping Paper, stamp, color in and die cut a lot of Wild Roses. Stamp and color one batch with Lilac Posies ink and the daubers. Stamp and color another batch in Victorian Velvet ink. You will need to make six small roses, three medium roses, two large roses and one extra-large rose in both colors. Also make eight rose buds and seven leaves. All the roses are double layered. All the buds are finished with a green petal leaf. When all the roses and leaves are cut and colored, place them in the molds. You can place up to three layers at a time. Lightly spritz with water, run through a die cutting machine, tap out and allow to dry. Add extra color to the flower tips, using a dauber and Plum ink for the pink roses and Chrome yellow for the yellow roses. Add stamens to the rose centers. Glue in place. Don’t forget to offset your petals as you go.

Using hot glue, adhere a small double layer rose to the center of each heart on the side panels of the box. Now make a flower arrangement for the top of the box by adhering an assortment of roses to a piece of white card. Fill in the gaps with smaller roses. Cut around the card until you cannot see any excess card. Adhere to the top of the box. Adhere rose buds and leaves all around the edges to fill in any small gaps. Using Dries Clear glue and a small brush, add glue to the flowers and leaves, cover with glitter. Allow to dry. All done.

Other Products: White cardstock

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: Cut a 6 by 6 " card panel from the Wild rose paper collection. Cut 2 more square pieces of cardstock of size 6 1/2" by 6 1/2" and one more piece of size 7 by 7". Mat the 6 by 6” panel on another pattern paper, arrange the pattern papers and adhere them as shown. Cut the round decorative die from the courtyard elegance die set in white and gold, and the largest window frame die from the rounded window frame die set from the pattern papers.nCut the decorative borders from the swirly accent spray die set using luxe gold cardstock. Arrange and adhere the die cut elements on the card as shown.

Stamp the flowers from the small wild rose cling stamp set with archival ink in plum ink and color them using archival ink plum and memento rose bud, stamp a few more flowers using archival fern green and color using memento rose bud and lilac posies. Stamp the leaves from the large wild rose stamp set and leafy accents stamp set using archival fern green and color them using memento ink - new sprout, bamboo leaves and olive green. Shape the flowers and leaves using their coordinating shaping molds. Dust the flowers and leaves with crystal clear glitter powder. Arrange and glue the flowers and leaves as pictured. Lastly add a sentiment from the paper collection.

Other Products: Ribbon twine, white cardstock

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: Click here to view more photos of this project. Cut the sides and base for the box using the dies from the treasured heart gift box set with the pattern papers from the wild rose collection. Cut the decorative pieces using the dies from the treasured heart gift box die set with dark pattern papers and luxe gold cardstock. Glue the sides of the box by connecting the folding edges and glue the prepared box on the base. Adhere the die cuts on the sides.

Stamp the flowers from the small wild rose cling stamp set with archival fern green and color them using memento rose bud and lilac posies, stamp and color a few more flowers using archival ink plum and memento rose bud, stamp and color the tiny flowers using memento ink new sprout. Stamp the leaves from the large wild rose stamp set and leafy accents stamp set using archival fern green and color them using memento ink - new sprout, bamboo leaves and olive green. Shape the flowers and leaves using their coordinating shaping molds. Dust the flowers and leaves with crystal clear glitter powder. Arrange and glue the flowers and leaves on the top flap in such a way that the box opens with ease, as shown.

Other Products: Ribbon, zircon,

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: Click here to view more photos of this project. Cut 6 longer sides out of white paper from the HCD1-729 Treasured Heart Gift Box Die set. Cut one base of the box out of white paper. Connect the sides of the box with glue. Cut 6 double hearts from the paper collection. Adhere to the sides of the box, cut 6 thin hearts from white paper and glue to the sides of the box, glue zircon.

Cut two middle dies from the Rounded Window Frame Die from white paper. Cut both in half with scissors, put them together in the padded pages, glue the upper part after the cut length.

To create flowers, stamp the Small Wild Rose and Large Wild Rose on the Deluxe Flower Shaping paper a few times using Archival Ink-Carnation Red and die cut using the coordinating dies. Shape using HCFB1-487 Large 3D Wild Rose Shaping Mold and HCFB1-486 Small 3D Wild Rose Shaping Mold and pull through white stamens from Bridal Bouquet-Small and one pink from Rose Hip Stamens-Large. Glue everything with hot glue.

To create leaves, stamp the Large Wild Rose Die on the Deluxe Flower Shaping paper with Archival Ink –Fern Green, die cut with the coordinating die, shade using this same ink. Shape leaves using 3D Shaping Mold.

Adhere the flowers on the glued rounded diecuts as pictured. Add ribbon.

Apply a round diecut with flowers to the top of the box by screwing it in, thus creating a box closure.

Other Products: Die Cutting machine, Trimmer or Guillotine, Scoreboard, Scissors, Bone folder, White cardstock, Hot Glue gun, Peeled Paint Ranger Distress Ink, enamel shapes

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: Click here to view more photos of this project. Easel card measures - 8 1/2” inches by 8 1/2” inches. To create card base, cut out 9” x 8 1/4” piece of White Card and score it at 8 1/4” (long side up), then fold it using bone folder along the score lines. Cut out 8 1/4” x 8 1/4” piece of White Card and score it at 4 1/8”, fold it using bone folder along the score lines. Adhere both pieces together with the small fold on the top of the base. Cut out 8” x 8” piece of Paper Collection and adhere it inside the card. Cut out 8 1/4” x 4” piece of Paper Collection and adhere it to the card base to cover the connection between two pieces of White Card. Die cut six decorative corners of White Card using Swirly Accent Spray Die and adhere them to the card as shown. Die cut decorative piece of White Card using Adorn It Pocket Accents Die and adhere it inside of the card using both Dries Clear adhesive and Foam Strips. Cut out 5 3/4” x 5 3/4” piece of White Card and adhere it to 6” x 6” piece of Paper Collection and adhere, then cut out 5 1/2” x 5 1/2” piece of Paper Collection and adhere it on the top. Adhere final piece to the card base and cut out the excess pieces if needed. Die cut eight decorative borders from White Card using Swirly Accent Spray Die, then stack each two and adhere them together. Then adhere final pieces on every side of the easel square panel as shown.

Stamp the flower image from Small Wild Rose Cling Stamp Set and Large Wild Rose Cling Stamp Set with Vermillion Ranger Archival Ink on art foam paper and colour them in with Buttercup Ranger Archival Ink using Daubers. Die cut the flowers with matching die from Small Wild Rose Die and Large Wild Rose Die, then shape them using Heat It Craft Tool. Assemble flowers using Deluxe Flower Shaping Kit and hot glue gun. Stamp leaf cluster of Leafy Accents Cling Stamp Set with Peeled Paint Distress Ink and colour them in with the same Peeled Paint Distress Ink. Die cut leaves using matching die from Leafy Accents Die set and shape them using Deluxe Flower Shaping Kit. Using a sponge, add Designer Dries Clear Adhesive to the flower petals and leaves, then sprinkle them with Rajni Chawla’s Crystal Clear Glitter. Leave them to dry completely and then adhere them to the card as shown.

Cut out sentiment from the Paper Collection and adhere it to the slightly larger piece of White Card, then adhere the final piece to the card using 3D foam pieces. For finishing touches, add enamel shapes to the card front.

Other Products: Distress ink Seedless Preserves and Mowed Lawn, Off White Cardstock, Diecutting Machine, Hot Glue Gun, Glitter Dust, nuvo Drops, Distresser Tool.

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: The ready side fold card measures 6" by 8.3". Trim a panel of off-white cardstock measuring 5.7” by 8” rough the edges with distresser tool, adhere on card base using foam strips. Choose the paper from the designer paper collection and cut to size measuring 5.4" by 7.7" to create a front panel, rough edges and adhere onto first panel using clear glue.

Cut a golden die cut frame using Intricate Swirl Frames Die. Layer the frame on the card panel with the help of foam tape as shown.

For the flowers, stamp the small wild roses on Deluxe flower shaping paper using Cactus Flower ink, color with the vibrant fuchsia and seedless preserves, diecut using the coordinating die and shape in the Small 3D Wild Rose Shaping Mold. Layer three same size petals together to create one flower. Create 5 flowers. Use the groove golf tool to make a hole in the center and pull the stamens through. Use the hot glue gun to secure the stamens. Stamp the leaves using leafy green ink, color with mowed lawn ink, diecut and shape in the mold. Sponge the flowers and leaves with dries clear glue and sprinkle with glitter dust.

Stamp the Leafy Accents leaves on Deluxe Flower Shaping Paper using leafy green Ink. Color using mowed lawn and diecut using the coordinating die. Shape using the Leafy Accent Mold, sponge with dries clear glue and sprinkle with glitter dust.

Create a sentiment from paper collection. Once all the elements are ready, assemble the card as shown using hot glue gun. Embellish with Nuvo Drops.

Other Products: 7” square white card base, kraft card, hot glue, foam pads, white card

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: Cut a 6” square paper from the collection and use the cut mat create die to die cut the centre image. Adhere the frame centrally to the card base.

Cut a 4” square piece of white card and edge this with New Sprout ink, adhere the center image to the white card and mount on the center of the card base using foam pads. Use a dauber to add a little new sprout ink around the edge of the card base.

Make the flowers: Stamp onto the flower shaping paper using Sweet plum ink. Add cantaloupe ink to the centre of the flowers and colour the petals using lulu lavender. Die cut and add sweet plum to the outer edges of the petals. Place the flowers face down into the mold and spritz with water. Place the top of the mold onto the flowers and run through the diecutting machine to shape. Add additional dimension to the edge of the leaves using the golf tools. Allow to dry. Place a ball of hot glue in the centre of the flowers and cover with a mixture of the 3 prill colours. Allow to cool and remove the excess prills.

Make the leaves: Stamp onto flower shaping paper using bamboo leaves ink, colour using new sprout ink and die cut. Add shading using bamboo leaves ink. Place face down into the mold, spritz with water and place the top of the mold onto the leaves, run through the die cutting machine to shape. Allow to dry.

Create the keys: die cut 2 keys from kraft card, adhere together and cover in nuvo mousse. Make 2.

Position the flowers, leaves and keys around the image and hot glue into position.

Other Products: Purple posy card – Stampin Up!, purple bakers twine, gunmetal grey nuvo mousse

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: Click here to view another photo of this project. Die cut 6 of the box sides using purple posy card. Score and burnish all the fold lines. Die cut 6 each of the lid panels and the decorative square using paper from the collection and adhere to the panels.

Adhere the panels together to create the hexagon box. Diecut 2 hexagons - Glue one to the inside bottom of the box and the other to the outside base of the box.

Die cut 6 solid double hearts, 6 double decorative hearts and 6 single decorative hearts using purple posy. Cover the decorative hearts in nuvo mousse. Adhere the solid and decorative hearts together and adhere one to the top of each lid panel.

Interlock the box lid flaps and tie with purple bakers twine.

Make the flower: Stamp onto the flower shaping paper using Sweet plum ink. Add cantaloupe ink to the centre of the flower and colour the petals using lulu lavender. Die cut and add sweet plum to the outer edges of the petals. Place the flower face down into the mold and spritz with water. Place the top of the mold onto the flower and run through the diecutting machine to shape. Add additional dimension to the edge of the flowers using the golf tools. Allow to dry. Place a ball of hot glue in the centre of the flowers and cover with a mixture of the 3 prill colours. Allow to cool and remove the excess prills.

Make a leaf: Stamp onto flower shaping paper using bamboo leaves ink, colour using new sprout ink and die cut. Add shading using bamboo leaves ink. Place face down into the mold, spritz with water and place the top of the mold onto the flowers, run through the die cutting machine to shape. Allow to dry.

Hot glue a single flower and leaf onto the knotted bakers twine.

Other Products: Silver cardstock, white cardstock (for card base), Rhinestone

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

For more ideas on creating with the Decorative Royale Square & Circle Dies, watch the tutorial at https://youtu.be/tqmtn_TiVVw.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Card size: 6 x 6”. Cut a piece of purple decorative paper 6x 6” and glue it to the card base. Glitter paper. Cut all pieces of the Courtyard Elegance out of silver. Glue them to the purple ending with the last square going on at a diamond. Add a large clear rhinestone to center.

Stamp all sizes of Wild Rose enough times to have several layers on the large flower using Majestic Violet, sponge, die cut, shape in mold (see video). Stamp leaves from the large Wild Rose set and from the Leafy Accents using Fern Green, sponge with Leaf Green and flower colors, die cut and shape in molds. Stamp 2 Wild Aster Sprays using Fern Green, die cut then add Lilac Prills. Stamp Lilacs, sponge using Majestic Violet and Deep Purple, die cut and shape on a piece of foam (or in a shaping mold if you have it) then add green Prills.

I wanted to see how the Wild Rose would look with a lot of layers so my large flower has about 7 layers to it. I really like it, it looks like a totally different flower. The other Wild Rose flowers have 2 and 3 layers each. I used Rock Candy and Bead Stamen in all the Wild Rose flower centers. Gloss the leaves and glitter the flowers. < /p>

Arrange flowers around bottom and left side of the inner silver circle, add leaves and lilac filler flowers. Cut apart the Wild Aster Sprays and insert those where needed to complete the arrangement. The last thing is to add a banner sentiment. I always curl those, but you don’t have to. Glue it to the card starting at arrangement and angling up towards the right corner.

Other Products: Die cutting machine Cut’n’boss, heatgun, cheesecloth, water mister, hot glue gun, hot glue, scissors, sequins, Dew drops’s robin nest, nuvo vintage drops dusty rose, Pébéo Cerne relief silver, Pébéo painting pearl violin, pébéo glitter medium

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: The finished card measure 4 3/4 inches by 6 inches. Cut the card base in a white card stock to 9 1/2 inches by 6 inches and score at 4 3/4 inches on the longer side. Fold to make a vertical top folding card. Cut a 4 1/2 x 5 3/4" piece of layered pattern paper from Wild Rose Collection and glue it to the card base. Diecut 6 circles frames in a white cardstock by using two dies together (from the circle basics large kit). Glue them together to make thinckness. Glue different circle paper under it. Paste in the center of the card.

Stamp the Small Wild rose with ink on white cardstock and cut it with the appropriate die. Use the Pébéo cerne relief silver to outline the flower. Let it dry (it can take more than 1 hour). After, use the prisme painting pearl violin et color with a brush inside the cerne relief. When dry, add Pebeo glitter medium to add shinny glitter. Let everything dry (it can be long too). Make 3 flowers: 1 big, 1 medium and 1 small. Stamp leaves from Large Wild Rose with the Fern Green Ink also on a white cardstock. Color it with the same color with a dauber. Cut it with the coordinating die. Shape the flowers by using the 3D Shaping Mold and give further shape with Deluxe Flower Shaping Kit tools.

Put cheesecloth and sewing thread to the left to your frame and glue your leaves and flowers over it. Glue under it a border cut with the sweetheart border die. Cut a sentiment from your paper and glue it with 3D foam next to your flowers.

Add sequins, wire, dew drop and nuvo drops to add the final touch.

Other Products: Corner rounder, White Cardstock, Diecutting Machine, Hot Glue Gun, Plum Cardstock, Dimensional Tape

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: Card size is 6 x 6”. Score and fold 12 x 6” white cardstock at 6” on the long side to create a side fold card base. Using the Decorative Classic Border Basics Die, diecut the one edge of the card front, sponge the edges with dries clear adhesive and sprinkle with crystal ultrafine transparent glitter. Cut a piece of plum cardstock 5 7/8 x 5 7/8”, diecut the edge using another die from the same set and ink the edges with Sweet Plum ink. Cut a piece of paper from the Wild Rose collection 5 3/4 x 5 3/4” diecut the edge, ink the edges with the Sweet Plum ink and adhere all the layers together. Cut a coordinating paper from the collection 5 7/8 x 5 7/8”, ink the edges and adhere to the inside of the card.

Stamp the small wild roses on Deluxe flower shaping paper using Sweet Plum ink, color with the same ink, diecut using the coordinating die and shape in the Small 3D Wild Rose Shaping Mold. Layer three same size petals together to create one flower. Use the groove golf tool to make a hole in the center and pull the stamens through. Use the hot glue gun to secure the stamens. Stamp the leaves using Bamboo leaves ink, color with same ink, diecut and shape in the mold. Sponge the flowers and leaves with dries clear glue and sprinkle with Rajni Chawla’s Crystal Clear glitter.

Stamp the Leafy Accents leaves on Deluxe Flower Shaping Paper using Bamboo Leaves Ink. Color using the same color and diecut using the coordinating die. Shape using the Leafy Accent Mold, sponge with dries clear glue and sprinkle with Rajni Chawla’s Crystal Clear glitter.

Randomly sponge the card front with dries clear glue and sprinkle with crystal ultrafine transparent glitter. Cut a sentiment from the paper collection, round the corners, sponge the edges and add glitter. Cut plum cardstock slightly larger than the sentiment, round the edges, adhere together using dries clear glue, then adhere to the card front using dimensional tape.

Adhere the flowers and leaves to the card front using hot glue.

Other Products: White card stock, Scissors, White organza ribbon, Hot glue gun, Double sided tape, Diamond dust.

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: Click here to view more photos of this project. Stamp the leaves and flowers: 3x leaves, 18x small flowers, 1x med flower. Chose the color for the flowers, here the Sunflower is used. For the stamen centers, use the red stamens, clear drying glue and diamond dust or glitter. Apply glue to the stamen heads then dip into the diamond dust or glitter set aside to dry. Make one for each flower center, when dry make a hole in the flower center so the stamen can be threaded through. Secure the stamen to the flower using the hot glue gun. When the hot glue has cooled trim away the stamen threads ready to use on your project. The leaves are colored with the Leaf green ink. The flowers and leaves are shaped using the 3D shaping molds. Use the shaping tools to ball the flower centers so the petals stand higher.

Find the green printed paper from the wild rose paper collection. Taking the dies for the basic gift box, place the dies for the gift box so you will get 6 sides from the paper and 1 under piece. Taking the square cut out die and the white card stock, cut also 6 squares. Adhere double sided tape to the join flaps on each side.

Taking the die cut squares, using the leaf green archival ink and daubers, bring ink onto the squares. Apply clear drying glue to the square using the aid of a hydra foam sponge. Dip this into the glitter and put aside to dry. When dry adhere one to each of the sides of the gift box. Taking the premade wild flowers, adhere with the hot glue gun 3 wild roses to the center of the squares. Adhere each gift box side together leaving one side still open. Adhere the gift sides to the base then closing the last box side, using double sided tape and clear drying glue to do this.

Taking the green printed strip from the paper pad, you will be using both paper strips. Divide both the strips into 4. Trim the edges into a point so you can adhere together without it being too thick. Adhere both ends together with the glue gun or clear drying glue without making a fold in the paper-so it forms a bow. Arrange each piece so you have a four-sided bow then make another to so you can adhere on top of this which makes a layered bow. Adhere the leaves and wild rose to the center of this bow. Fold the gift box top so it forms a closing lid. To the last folded top piece, adhere the bow to this so it will still open.

Other Products: White cardstock, Big Shot Machine.

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

For more tips on creating with the Window Scene cards & dies, watch the tutorial at https://youtu.be/LnM95GR92ao.

Instructions: Cards base size is 6” x 6”. Take pattern paper from the collection, tear the edges and adhere it on card base using Designer Dries Clear Adhesive.

Cut two Regal Pocket Accents Die from white cardstock and adhere on card base on the left top edges and right bottom edges. Sprinkle crystal clear glitter using Designer Dries Clear Adhesive.

Cut one circle die from Rounded window Frame Die from Gold cardstock and the other die from white cardstock and adhere them as shown with foam tape to give some dimension.

Stamp some wild rose flowers from Small Wild Rose Cling Stamp Set and Large Wild Rose Cling Stamp Set on Deluxe Flower Shaping Paper using archival ink-vibrant fuchsia and cut them with coordinating die and color them with rose madder, vibrant fuchsia and buttercup and for leaves with archival ink- Vivid Chartreuse , library green and shape them using Small 3D Wild Rose Shaping Mold and Large 3D Wild Rose Shaping Mold and layer them with Assorted Rose Hip Stamens-Large and for filler flowers using Assorted Pearl Stamens-Medium and Assorted Bead Stamens-Medium. Add Nuvo mouse gold to the roses and leaves. Add crystal clear glitter to these flowers. Make arrangement of these flowers and leaves as pictured.

Cut one banner die from Arrows and Banner Die Set and stamp sentiment from Celebrate Love Sentiments Cling Stamp Set. Adhere it with foam tape.

Other Products: White cardstock, ribbon, distress ink forest moss and rusty hinge, hot glue

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: Click here to view more photos of this project. From white cardstock diecut one base and six sides of box using Treasured Heart Gift Box Die. Glue box together. Using the same set, diecut decorative elements from Luxe Gold Cardstock and glue on your box.

Stamp the flowers and leaves from Large Wild Rose Cling Stamp Set and Small Wild Rose Cling Stamp Set on Deluxe Flower Shaping Paper using Distress Ink Rusty hinge (flowers) and distress forest moss ink (leaves), color them using Ranger Archival Ink Pad sunflower and distress ink rusty hinge (flowers), distress forest moss (leaves) and diecut using matching dies. Use Large and Small 3d Wild Rose Shaping Mold to shape flowers (add some water before closing the mold). Glue petals together using hot glue. Add stamens from Assorted Rose Hip Stamens-Large and Rock Candy Stamens Small.

With a sponge, put glue on the flowers and sprinkle with Rajni Chawla’s Crystal Clear. Make a bow from ribbon. Add the bow and flowers on lid of box using hot glue.