Other Products: White cardstock, hot glue, hot glue gun, funnel tray, scissors, paper trimmer, die cutting machine

Instructions: Cut a piece of white cardstock to 10 x 7", score and fold at 5". Lay the Scalloped Flourish Gateway die onto the folded cardstock, extending the left edge over the folded side and diecut to create a shaped card base. Diecut a coordinating light green panel from the Spring Garden Paper Collection. Attach this piece on top of card base. Sponge Vivid Chartreuse and Sunflower ink onto green panel of card base as shown. Diecut largest eyelet frame from Eyelet Frame Gateway Die in white cardstock. Diecut the lattice fence from Lattice Flourish Gateway die from white cardstock. Apply Dries Clear glue onto sponge and dab over diecut pieces and card base, then sprinkle with Crystal Clear and tap off.

Stamp the following images onto Deluxe Flower Shaping paper and diecut with coordinating dies. Stamp the large and small hyacinth from HCPC-3947 Fragrant Hyacinth Cling Stamp Set in a two tone of Olive and Leaf Green ink. Stamp them again, this time stamp the large hyacinth in a two tone of Cactus Flower and Forget-Me-Not ink. Stamp the small hyacinth in Cactus Flower ink. Stamp 5 sets of the petals from the same set in two tone of Cactus Flower and Forget-Me-Not. Stamp 3 sets of the petals in Cactus Flower ink. Stamp the small daffodil center from HCPC-3946 Spring Daffodil Cling Stamp Set in Coastal Coral ink. Stamp 2 of the small tri-petal of daffodil in Sunflower ink. Stamp the ‘Let’s Celebrate’ in Cactus Flower ink on white cardstock and cut with a paper trimmer. Cut 1 1/2 x 5/8" piece of paper to be used for daffodil stem.

Use the Stack and Store daubers along with the following inks to color the images. For the purple toned hyacinth petals, use Cactus Flower and Forget-Me-Not ink. For the pink petals, use Pink Peony and Cactus Flower in the centers. Use the same colors for the matching hyacinth images. Remove the pink and purple stem & leaves. For the other green leaves, use Vivid Chartreuse and Leaf Green. For the daffodil center, use Sunflower, Pink Peony and Coastal Coral ink. Use Sunflower and Pink Peony on the rest of the petals. Sponge the 1 1/2 x 5/8" piece of paper with Leaf Green ink. Roll up into a stem for daffodil. Sponge the edges of sentiment lightly with Vivid Chartreuse ink. Apply a light touch of Crystal Lacquer over the flowers and leaves.

Shape the hyacinth petals and daffodil petals in the coordinating shaping molds. Use the stylus from Deluxe Flower Shaping kit to finish giving shape to flowers and leaves. Use Double Dots to layer the hyacinth flower image onto the stems. Use hot glue to attach the shaped hyacinth petals. Assemble the daffodil. Color the stamens with Sunflower ink and thread through center of daffodil, attaching with hot glue on the backside. Arrange and attach the hyacinth onto card as shown. Attach the stem and daffodil. Attach sentiment. Use the Dries Clear to add prills in the centers of hyacinth.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine, gallery oil pastels

Instructions: Die cut 12 of the Treasured Heart Gift Box sides using Paper Collection. Score and fold all the lines. Die cut 6 each of the lid panels and the decorative square using Paper Collection and adhere to the panels. Adhere the panels together to create the hexagon box. Die cut 2 hexagon bases and glue one to the inside bottom of the box and the other to the outside base. Die cut 6 single decorative hearts and plain hearts using Paper Collection. Adhere the decorative hearts to the top of lids panels and adhere one to the side of each panel. Interlock the box lid flaps outside to create basket. To create handle use Ticket and Tags Die cut 4 of the decorative doily rectangles die and glue together. Attach to the basket. Place flowers on the sides.

To create daffodils, Stamp the Spring Daffodil Cling Stamp Set on paper with Ranger Archival Ink Pad – Sunflower and cut using the coordinating dies. You will need 2 petals of each to create flowers for bigger flower use the biggest stamp, for smaller flower use smaller size stamp. Colour the flower with Ranger Archival Ink Pad – Sunflower and Ranger Archival Ink Pad - Pink Peony using a sponge dauber. After colouring, place the flowers into the mold and run through cutting/embossing machine. Pierce the center and glue in some stamens using hot glue gun. Add a little hot glue to the underside of the flower. Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Step 1: To create Hyacinth, stamp Fragrant Hyacinth Cling Stamp Set on paper with Ranger Archival Ink Pad - Deep Purple and Ranger Archival Ink Pad - Leaf Green and cut using the coordinating dies. Shadow with this same ink.

Step 2: To create Hyacinth petals, stamp Fragrant Hyacinth Cling Stamp Set with Ranger Archival Ink Pad - Deep Purple on white paper a few times, colour with this same ink and cut using the coordinating die. Place the flowers into the mold face down and run through cutting/embossing machine. Create double little flowers. Using Power Outage Prills, fill the flower centers. Glue to the Hyacinth using hot glue gun and place as shown. Sponge the petals and leaves with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Stamp the leaves from the Large Floral Urn Cling Stamp Set on the white paper with Ranger Archival Ink Pad - Leaf Green, cut out with the coordinating die, shade use this same ink and shape. Stamp sentiment using Thank You Sentiments Cling Stamp Set on the piece of paper collection with Ranger Archival Ink Pad - Jet Black and place onto the card using adhesive foam strips. Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

Other Products: Memento Dandelion Ink, White Cardstock, Die Cutting Machine, Dimensional Tape, Hot Glue Gun

Instructions: My card size is 5 x 7”. I used the Teardrop Lattice Gateway Die and cut a shaped card out of white cardstock. I covered the base card with a piece of Sheet 7B from the paper collection. Cut out the largest die with the lattice areas using white cardstock and glue over the piece of the pretty paper.

Using the smaller dies in the set I cut out a piece of Sheet 2B from the paper collection and then used white cardstock to cut out the lattice piece. I used dimensional tape to adhere to the card base and give a bit of dimension.

I stamped the Large Daffodil from the Delightful Daffodil & Hyacinth using Rich Cocoa ink and colored using Dandelion Ink, Fern Green and Leaf Green ink. Cut out using the coordinating die.

Next, stamp the flowers and leaves and fillers for the card. I used Fern Green for the leaves and fillers and Dandelion for the Daffodils. I colored the Daffodils with Dandelion ink as well and cut out using the coordinating dies. The filler pieces were colored with Leaf Green and Majestic Violet and then use the coordinating dies to cut them out. Lay the Daffodils onto the mold, spritz with water and run through the die cut machine. Turn them out to dry. I used hot glue to put the daffodils together then poked a hole and run through the stamen and hot glued them into place.

Lots of glitter was sprinkled over these flowers and leaves and also on the lattice of the Teardrop Lattice Gateway Die.

The card is finished. I love how this card turned out...it is a definite statement piece!

Other Products: Clear Embossing powder, Heat tool, Glitter powder, scoring board, die cutting machine, dimensional tape, white card stock

Instructions: Create a card base measuring 8 1/2 inches by 7 inches. Cut a mat layer from the Spring Garden Paper Collection 8 1/4 inches by 6 3/4 inches and adhere to the card front. Cut two pieces of Elegant Swirl frame, one from white cardstock and one from Luxe Silver cardstock adhere to each other slightly offsetting. Add this on the top of card base. Cut the inside window from purple designer paper and a cut a silver border. Cut out the intricate window from the pattern paper, cut again using the Albums Tags and Accents die, cut a lavender frame using this same die and adhere to the centre of the card.

Stamp the Hyacinth image 2x on white card stock using the Cactus flower and Deep purple Archival ink and add clear embossing powder. Heat set with a heat tool and cut with matching Hyacinth die.

Stamp the small daffodils petals image on flower shaping paper with Sunflower ink. Stamp the inner part with Tiger Lily ink. Colour the images with the same ink shades and cut with coordinating die. Shape and mold the petals in the 3d flower shaping molds for the daffodils. Adhere the notches of the inner part to form a cup like shape. Adhere two layers of the daffodils petals and adhere this whole piece at the base of the inner part. Add 6 stamens in the centre. Brush a little with the glitter glue and add some glitter.

Make yellow filler flowers using the sunflower ink and the Hyacinth stamp and die. Shape the flowers in the 3D flower shaping mold for the Hyacinth. Add prills in the centre.

Make leaves using the Daffodils petals. Stamp them on the flower shaping paper using Library Green ink and colour using the Library Green colour and Leaf Green Colour. Cut with matching die and separate the petals and use as required.

Arrange the Hyacinth images and the daffodils on the card. Add filler flowers. Add coloured butterflies.

Finish the card by adding a sentiment stamped on any basic circle die cut .

Other Products: Ribbon, gems, dry foam, wire framed ornament/bauble, moss, sisal, perfect pearls, distress oxide chipped sapphire, wilted violet, shaded lilac, wire gutters, polystyrene egg approx. 3 1/4”, stick, floristry tape, black gesso

Instructions: Color Deluxe Flower Shaping Paper in Distress Oxide Ink and spritz with Ranger Perfect Pearls/water mist. Stamp Fragrant Hyacinth petals with Stazon and die-cut, run through the die-cutting machine in the 3D Hyacinth Shaping Mold, press the centers and curl the petals with Deluxe Flower Shaping Tools. Thread Bead Stamens through the center and secure with hot glue, edge with Manganese Blue. Stamp in Stazon the leaf portion of the hyacinth and reverse stamp, color and die-cut. Die-cut the tag from Spring Garden Paper Collection and stamp ‘let’s celebrate’in Deep Purple.

Color the ornament if required, cut an opening in the bauble/ornament and wedge in the largest piece of dry foam as possible pack sisal around it to hold it secure. Use hot glue to secure moss, tag, flowers and ribbon. Rub Leaf Green all over the polystyrene egg, wrap floristry tape around a stick and push into the egg. Adhere the hyacinth leaves front and back on the stick. Cut the wire stamens leaving a portion to push the petals into the polystyrene egg. Add butterflies and glitter.

Other Products: White Cardstock, green cardstock, Alcohol Inks-Yellow, green, orange and pink, jelly jar, iridescent Easter basket filler, embossing Ink Pad

Instructions: Jar is 2 x 2 1/2”, Project 6 1/2” tall. Stamp enough small daffodils (both parts) for 3 flowers using yellow. Sponge backs and edges with yellow. Run flowers through the shaping mold. Glue 2 bottom pieces together for each flower. Glue half circle top part of daffodil together at ends and fold bottom tabs up. Glue the top “cup” onto the bottom base. Stamp enough small daffodil (bottom only) using purple to make 3 “crocus”, sponge with purple on both sides and on edges. Glue 2 bottoms together for each flower make a small bowl stamp side out. Stamp Hydrangea using embossing fluid pad and emboss with white on white. Make 7 flowers with 2 layers each. For the small white flowers use 1 white beaded stamen in each. For the daffodil use the yellow pollen stamen and for the purple crocus use orange pollen and orange medium pearl stamen (dye the pearl stamen with orange alcohol ink).

Make long Daffodil leaves with green cardstock, hand cut about 5 leaves and curl ends.

Color jar with alcohol inks. Fill with Iridescent filler then fill with flowers and leaves (glue in place with hot glue). Glitter flowers.

Other Products: Memento Grape Jelly; Die cut machine;

Instructions: Prepare a 5 x 7” white card base with a piece of the Spring Garden paper on that slightly smaller.

Cut one of the Regal Lattice dies out of the yellow sheet from the Spring Garden paper, add foam dots to the back and adhere to the center of the card.

Stamp the Fragrant Hyacinth on white with the black ink, color with Zig Markers, cut out with the coordinating die, add foam dots and adhere to the center. Stamp the flowers on white with the Grape Jelly, color with the Lulu Lavender, cut out with the coordinating die, place in the matching mold and run through the die cutting machine to shape. Adhere on top of the main Hyacinth and add the Clementine Ultrafine Transparent Glitter in the center of each flower.

Stamp all the fillers on white with Northern Pine ink, color with the Zig Markers, cut out with the coordinating dies, arrange around the Hyacinth as shown. Cut the border tag out, stamp the sentiment, add foam dots to the edges and adhere to the bottom of the card.

To finish, add glitter to all the fillers.

Other Products: Brilliance Pearlescent Yellow ink, Ranger Distress ink – Shaded Lilac, Ranger Archival ink – Violet, Iris cardstock, floral tape, gloss gel medium, DMC Flower Pearls – Snow White

Instructions: Box instructions: For step-by-step photo instructions please visit my blog. Cut a piece of Deluxe Flower Shaping Paper cardstock 3” x 11 1/2”, score at 3”, 7 3/4" and 10 3/4". Mark at 1” and 2” on the 3” sides to mark for the strips to be added later. Cut a piece of card 3 1/2" x 3”, score at 1/2" on one side and then adhere both pieces together to create the box. Cut 4 strips 1” x 3/4", score at 1/2” on either side and adhere to the inside of the box which has been marked to create the panels to add the flowers. Cut two pieces of patterned paper 3” x 3” and adhere to the sides of the box. Cut a piece of patterned paper 3” x 4 3/4" and adhere to the front of the box.

Die cut the outer frame from Deluxe Flower Shaping Paper using the No. 1 die from the HCD2-7338 Lattice Flourish Gateway Die and then die cut another frame from patterned paper and adhere to the background frame. Die cut the decorative frame out of gold card using all the dies except for the sentiment and adhere to the front of the frame. Adhere to the inside back of the box approximately 1 1/2" from the bottom of the box.

Stamp the large hyacinth images from the HCPC-3948 Fragrant Hyacinth Cling Stamp Set with Magenta Hue, Violet, Vivid Chartreuse and Library Green inks on Deluxe Flower Shaping Paper. Colour the pink flowers with Pink Peony ink, the green flowers with Pearlescent Yellow and the purple flowers with Shaded Lilac ink and the leaves with Vivid Chartreuse and Library Green inks and die cut with the coordinating die. Stamp the small flower images from the HCPC-3948 Fragrant Hyacinth Cling Stamp Set in Magenta Hue ink, Violet and Vivid Chartreuse inks. Colour the pink images with Pink Peony ink, the green images with Pearlescent Yellow inks and Vivid Chartreuse ink and the purple flowers with Shaded Lilac and Violet inks. Colour the centres of the pink flowers with Magenta Hue ink, the purple flowers with Violet ink and the green flowers with Vivid Chartreuse ink and then die cut with the coordinating dies. Colour the backs of the pink flowers with Pink Peony ink, the green flowers with Pearlescent Yellow and the purple flowers with Shaded Lilac ink. Shape using the coordinating mold and adhere to the larger flower. Add Crystal Clear glitter to the flowers using gloss gel medium and add Hot Mamma Prills to the centres of the pink flowers and Lettuce Entertain You Prills to the purple and green flowers. Add a large green hyacinth flower to the back of the box on the right side. Add a large purple hyacinth to the second panel from the back and a small purple flower to the left of the box on the third panel. Add a large pink hyacinth to the middle of the box in the fourth panel and a small green hyacinth to the right of the box on the front panel as shown.

Stamp the daffodil images from the HCPC-3947 Spring Daffodil Cling Stamp Set in Vivid Chartreuse ink on Deluxe Flower Shaping Paper. Colour the inners with Vivid Chartreuse ink and the outers with Pearlescent Yellow ink and die cut with the coordinating dies. Colour the backs of the trumpets with Pearlescent Yellow ink and the leaves with Vivid Chartreuse ink and finish colouring with Tiger Lily ink on the edges of the trumpets. Shape using the coordinating mold and assemble the trumpet and adhere to the leaves. Pierce the centres of the flowers and insert one green stamen and several white fluffy stamens and secure with Dries Clear glue. Finish the flowers by adding floral tape to the stamen stems. Add Crystal Clear glitter with gloss gel medium. For the buds crease the trumpets and add the leaf around the folded trumpet. Add the stamens and glitter as with the open flowers. Add two open flowers and two buds to the back of the card with hot glue. Add another open flower and bud to the right of the box as shown with a hot glue gun.

Stamp the leaf images from the HCPC-3930 Floral Shoppe Fillers Cling Stamp Set in Vivid Chartreuse ink on Deluxe Flower Shaping Paper. Colour the stems with Vivid Chartreuse ink and add Snow White Flower Pearls to the outer leaves and add to the panels to cover gaps in the box.

Front of box: Die cut the gate image out of gold cardstock using the gate die only from the HCD2-7338 Lattice Flourish Gateway Die set and adhere to the front of the box card as shown. Die cut the outer eyelet tag die from the HCD1-7202 Album Tags & Accents Die and then die cut the coordinating inner image from the pattern paper using the inner die. Adhere the paper to the gold tag. Die cut two sentiments from the HCD2-7338 Lattice Flourish Gateway Die – one from Deluxe Flower Shaping Paper and one from gold card. Adhere the gold sentiment to the white sentiment and then adhere to the middle of the tag as shown. Adhere the tag to the front of the box card as shown.

Add a small pink hyacinth to the left of the tag and some extra flowers to the base of the flower.

Stamp the butterfly images from the HCPC-3947 Spring Daffodil Cling Stamp Set and the HCPC-3943 Delightful Daffodil & Butterfly Cling Stamp Set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating dies. Add Crystal Clear glitter with gloss gel medium and then adhere the small butterflies on the label and the large butterfly to the top right at the back of the card as shown.

Other Products: White string, ribbon, hot glue, Ranger Dstress Ink- walnut stain, Mod Podge Dimension Magic, pieces of shiny organza

Instructions: Cut white card base and fold with dimensions of 8.25" x 5.75". From the paper collection, cut an 8" x 5.50" rectangle and glue it to the base. From white paper, cut a frame from the Lattice Swirl Gateway Die set and adhere it to the card.

With Brown Distress Ink - Walnut stain, stamp the urn from the Large Floral Urn Cling Stamp Set, color it with the same ink and cut it out with a matching die. Then cover it with Mod Podge Dimension Magic and wait for it to dry.

To make daffodils, stamp the images from the Spring Daffodil Cling Stamp Set with yellow ink, then cut with coordinating die, cover them with the same ink and form with the 3D mold. Glue the middle of the flower with hot glue and add the stamens.

To make hyacinths, stamp the stem and leaves with green ink and the top part of the flower from the Fragrant Hyacinth Cling Stamp Set with blue and pink ink, then cut it out with a suitable die. Stamp single flowers several times with pink and blue inks and shade with the same ink. Cut them out with the coordinating die and shape them with the 3D mold mold. Then, glue single flowers with hot glue on the previously cut flowers with stems and fill the centers with a little glue and Go Man Go Prills

To create leaves, stamp the Floral Shoppe Fillers Cling Stamp Set and Delightful Daffodil & Hyacinth Die on the Deluxe Flower Shaping paper with Ranger Archival Ink Pad - Fern Green, die cut with the coordinating die, shade using this same ink. Other leaves are also stamped with Ranger Archival Ink Pad - Leaf Green, die cut with the coordinating die.

On the thin strip from the paper collection, stamp the sentiment from the Elaborate Birthday Cling Stamp Set in black ink. Glue the Urn as shown. Arrange the leaves and flowers on card, glue with hot glue, add a white string, ribbon and pieces of shiny organza.

Cover the flowers with glue and Rajni Chawla's Crystal Clear.

Other Products: Altenew watercolors, Brustro Cold Pressed Watercolor Cardstock, Brustro Green gold brushes, double sided foam tape and pearls.

Instructions: Cut a piece of 4" x 5 1/4" pattern paper from Spring Garden Paper Collection and adhere it on a 4 1/4" x 5 1/2" white card base. Stamp the image from Delightful Daffodil & Butterfly Cling Stamp Set on a piece of scrap paper and then on watercolor cardstock using Jet Black Archival Ink. Color in the image with Altenew watercolors and die cut using the matching die from Delightful Daffodil & Butterfly Die.

Die cut a piece of white cardstock and Luxe Silver Cardstock using the dies from Eyelet Rectangle & Basics Die to make 2 frames. Adhere them together. Die cut a piece of white cardstock using the die from Adorn It Pocket Accents Die and cut it in half. Adhere it behind the frame as shown using double sided foam tape. Adhere the colored image on this die cut as shown. Cut a piece of 3 1/4" 4 1/4" pattern paper from same paper collection and adhere it on a same sized white cardstock. Adhere this behind the frame using double sided foam tape. Adhere this frame slightly offset to the right on the card front as shown.

Stamp the flowers from Fragrant Hyacinth Cling Stamp Set on a piece of Deluxe Flower Shaping Paper using Vibrant Fuchsia and Cactus Flower Archival Inks. Ink them with same inks and die cut using matching die from Fragrant Hyacinth Die. Shape them using 3D Hyacinth Shaping Mold and Deluxe Flower Shaping Kit. Add a few white stamens from Assorted Pearl Stamens to the flower centers.

Stamp the leaves from Cottage Tree 'scapes Cling Stamp Set on a piece of Deluxe Flower Shaping Paper using Leaf Green Archival Ink. Ink with same ink and die cut using matching die from Cottage Tree 'scapes Die. Shape using Deluxe Flower Shaping Kit.

Arrange and adhere all the flowers and leaves on the card as shown. Use Apple Green Nuvo Crystal Drops to make the stamens on the colored image of daffodils. Add a few pearls to add finishing touch.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, sisal, promarkers, ColorBox Frost White Ink

Instructions: Cut a piece of white cardstock 8 1/4 x 11", score at 5.5" and fold to create a base. Cut a piece of patterned paper from Spring Garden Paper Collection to 5.5 x 8". Cut out the biggest white frame from the Teardrop Lattice Gateway Die and the biggest white frame from Eyelet Frame Gateway Die. Then use the one size down from Eyelet Frame Gateway Die and cut out a green frame. Use the fifth size down and cut out two frames, white and green. Cut out a smallest, white decorated frame from the Regal Lattice Gateway Die. Adhere all elements as pictured. Stamp the sentiment with Celebrate Love Sentiments Cling Stamp in Forget-Me-Not ink and cut it out.

Stamp 3 sprays from Delightful Daffodil Spray Cling Stamp Set in Frost White ink onto Vellum paper, use Opaque Embossing Powder, heat emboss them and diecut with coordinating die. Color them with Promarkers. Stamp 2 lilac clusters with Leaf Green ink, color them and cut out with coordinating die. Stamp 6 berries with Countryside Winter 'scapes Cling Stamp Set in Forget-Me-Not ink on the Deluxe Flower Shaping Paper. Color them with promarkers and cut out with matching die.

Stamp 18 hyacinth flowers in Vibrant Fuchsia ink, color them with Vibrant Fuchsia and Rose Bud inks and diecut with coordinating die. Stamp 6 daffodil flowers in Forget-Me-Not ink on the Deluxe Flower Shaping Paper, color them with Summer Sky, Rose Bud and Forget-Me-Not inks and diecut with coordinating die. You`ll also need about 12 leaves from Floral Shoppe Accents Cling Stamp Set. Stamp them in Leaf Green ink, color with the same, diecut with coordinating dies. Shape the flowers using their coordinating shaping molds, then bend their petals with Groove Golf Tool, for all flowers add blue bead stamens. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers.

Other Products: White cardstock, London Fog Memento Ink, Copic Markers: Y11, Y15, Y19, YG03, YG23, YG17, BV00, V12, V15, RV00, BV20,

Instructions: Card size: 5 x 7”, open: 7 x 15”. Use the 3 panel Gateway Fold Card base. Cut 3 white Teardrop Lattice Gateway decorative parts inside and out. Cut 3 yellow decorative paper panels to fit the card base using the plain outer die. Glue the yellow panels on the decorative white panels.

Cut 1 small bottom and 1 small daffodil top using Buttercup ink to make one flattened small Daffodil. Cut 2 large bottoms and 2 large daffodil tops using Buttercup to make 1 large flattened daffodilish type flower. Stamp 2 small Zinnia using green for flower bases. Use several yellow beaded stamen for each flower (leave wires to make stems). Wrap “stems” with floral tape. Stamp the little butterflies using purple and sponge with purple, die cut.

Stamp 2 arched and 2 straight Daffodil Sprays using black memento (if using Copic Markers). Stamp 1 large daffodil from Delightful Daffodils & Hyacinth. Die cut all and color. Stamp the swan and Sentiment using London Fog (or black) die cut and color.

On the first panel (showing when closed) add a bit of blue decorative paper to the bottom of the inside arched gateway (for a lake). Glue and pop up swan on lake, add Calla Lilies on both sides. Add 1 arched daffodil sprays to the bottom but before gluing the left side slide stems in under left side then glue. Glue a double butterfly at the top right.

Glue the sentiment to the middle of panel 2 then glue an arched spray to the top and a straight spray at the bottom.

Glue the large daffodil to the bottom of the 3rd panel and the last straight spray over the stem at the very bottom. Glue the butterfly to the top left side.

Glitter the flowers with Crystal Clear and randomly glitter the card panels with Ultrafine.

Other Products: Watercolor paint, paper trimmer, cutting machine, ruler

Instructions: From the 5A Spring Garden Paper collection, cut out the decorative HCD2-7191 Intricate Swirl Frames. From sheet 3B, cut out the openwork part of the same frame. From the luxe gold cardstock, cut out the the HCD1-7307 Royal Elegance Frames Die. Put all 3 layers together with transparent glue.

Stamp the smaller hyacinth onto the white cardstock using black ink. Cut with a matching die. Color the leaves and stem with green ink using an overlay. Watercolor paint the flowers in yellow with a little orange. Place the flower in the center of the frame as shown with the 3d foam strips to add dimension.

Fold the white cardstock in half along a vertical line, measuring a finished card base of 6 x 4". Adhere the base on the back of the card so that it is invisible.

Other Products: White Cardstock, Hot Glue Gun, Diecutting Machine, Dimensional Dots

Instructions: Card size is 6 x 6”. Fold and score 12’ x 6” Deluxe Flower Shaping paper at 6” to create card base. Cut Deluxe Flower Shaping Paper 6 x 6”. Trim two 6 x 6” panels from Spring Garden Paper collection, Sheet 10A to 5 7/8 x 5 7/8”, ink the edges and adhere one to the inside of the card and adhere the other to the 6 x 6” white cardstock leaving a small white border. Then adhere this panel to the card front using dimensional tape. Sponge the edges of the card front using dries clear adhesive and sprinkle with Rajni Chawla’s Crystal Clear Glitter.

Using the two largest dies from the Eyelet Circle & Basics Small Die set, cut a frame from white cardstock. Sponge the frame using dries clear adhesive and sprinkle with Rajni Chawla’s Crystal Clear Glitter. Adhere to the center of the card front.

Stamp the large and small Spring Daffodils using Archival Buttercup ink, color using the same ink, die cut using the coordinating dies and ink the edges using Archival Sunflower ink. Shape using the shaping molds and adhere the top petal together to form the circular top of the daffodil. Pierce all the petals using the Groove Golf Tool, insert stamens and adhere the petals together, offsetting the bottom petals, and adhere with hot glue. Sponge with dries clear adhesive and sprinkle with crystal clear glitter.

Stamp the daffodils from the Delightful Daffodil & Butterfly Cling Stamp set and the Delightful Daffodil & Hyacinth Cling Stamp set using Archival Olive ink, color using Archival Vivid Chartreuse, and Leaf Green inks. Diecut using the coordinating dies and add additional color to the edges using Olive ink. Cut the flowers off.

Stamp the Fragrant Hyacinth petals on Deluxe Flower Shaping Paper multiple times using Archival Majestic Violet ink, color using Archival Cactus Flower, diecut using coordinating die, ink the edges using Majestic Violet ink and shape in the shaping mold. Using the Deluxe Flower Shaping Kit, press the centers to add additional shaping. Sponge the edges with dries clear adhesive and dip the flowers in the crystal clear glitter. Add a drop of glue to the flower centers and add Lemon Chiffon Prills.

Stamp the largest hyacinth flowers using Majestic Violet and Olive inks. Color the leaves using Vivid Chartreuse and Leaf Green inks, diecut and ink the edges of the leaves using olive inks. Diecut the two smallest ovals from the Eyelet Oval & Basics Small Die set and adhere to the flower using dimensional dots for dimension. Adhere the flowers using hot glue.

Adhere the large hyacinth to the center of the circle frame at an angle using hot glue. Adhere the daffodils to the tops of the daffodil stems and adhere to the card base using hot glue.

Using green silk cord, tie two bows and adhere to the two daffodils.

Other Products: Archival Ink- Shadow Grey, VersaColor Ink- Neptune, Cardstock- White, Gems, Silk Ribbon, Emerald Creek Embossing Powder- Vintage Ivy, Embossing Pad, Heat Gun, Creative Embellishments Chipboard Title, Scrapbook Adhesives by 3L (Dual Tip Glue Pen, E-Z Runner Ultra, 3D Foam Squares, Crafty Foam Tape, Creative Photo Corners White, Adhesive Dots Medium)

Instructions: Take both sheets of the purple patterned paper and cut them in half leaving only the 6” portion with the dark purple patterned border. I used scotch tape on the back to adhere these 2 pieces together creating a simple bordered background. Die cut 2 of the Lattice Flourish Die from white cardstock, and 2 of the middle portions from green patterned paper. Adhere these 2 layers together and adhere to the middle of the layout using crafty foam tape. This created the decorative die cut border mat for the photo. Mat the slightly cropped 4 x 6” photo in white cardstock and add white photo corners. Adhere to the die cut border strip using foam squares.

Cover the chipboard title using dark green embossing powder (Vintage Ivy). Adhere below the matted photo using Adhesive Dots Micro. Add gems to the die cut border. Create a layered green silk ribbon bow and set aside for now.

Stamp and die cut 3 of the larger Hyacinth images onto white cardstock using grey ink (Archival- Shadow Grey). Stamp and die cut 5-6 sets of the Hyacinth mini flowers using grey ink. Stamp and die cut 3 sets of the Lush Lilac mini flowers using grey ink. Add color to 2 thirds of the flowers using purple/blue ink (VersaColor- Neptune) and daubers. Add color to the remaining flowers using violet ink (Archival- Majestic Violet) and daubers. Add those same ink colors to the Hyacinth bases. Add color to the leaves of the bases using green ink (Archival- Fern) and daubers. Shape all of the mini flowers using the coordinating 3D shaping molds. Add Prills to the middle of each mini flower using Prills and a liquid adhesive. Let dry. Add the mini flowers to the Hyacinth bases. I used the larger flowers in the middle and the smaller around the outside.

Add 2 different colored Hyacinth to the left-hand side of the matted photo. Then add the remaining Hyacinth to the right side of the matted photo. Add the silk ribbon bow to the bottom of the 2 flowers on the left-hand side.

Other Products: Smooth White Cardstock, Vellum Paper, Watercolor paper, Satin Twine, Dimensional Tape, Versamark, white embossing powder

Instructions: Ready tent fold card measures 6” × 8”. First, cut a mat from designer paper collection measuring 5.5” × 7.5”. Distress edges with matching ink and adhere it on ready card base. Cut another mat from designer paper measuring 5” × 7” and mat it on a piece of white cardstock which is 1/8 of an inch bigger onall four sides. Mat it on card using dimensional tape. Do Lattice Flourish Gateway diecuts from white cardstock and arrange them on card using dimensional tape.

Cut 2 circle die cuts, 1 from pattern paper and 1 from white cardstock using Decorative Circle Frames Die. Stamp sentiment on white cardstock using black archival. Glue it on card using dimensional tape. Stamp Butterfly image on vellum paper using versamark and heat emboss using white embossing powder, stamp again Butterfly image on watercolor paper using black archival. Paint it using zig markers. Cut both images using coordinating die and layer them. Glue it on card using dimensional tape. Tie a bow using satin twine and glue that.

For flowers, stamp daffodil flower on deluxe flower shaping paper using Sunflower ink and cut with coordinating dies. Paint flowers using same ink and shape using shaping mold. Further, do more shaping using tools and arrange them using hot glue. Stamp leaves from Leafy Accents stamp on deluxe flower shaping paper using fern green ink. Cut with coordinating dies and paint using leaf green ink. Shape leaves using shaping mold. Arrange flowers and leaves using hot melted glue as shown in the picture. For finished look, apply Crystal Clear powder on flowers and leaves using Art Glitter Clear Dries glue.

Other Products: Hot glue, stamping blocks, diecutting machine, black versafine clair ink

Instructions: Remove one of the panels from the gateway fold card base and die cut the front of the card base using the 2 decorative dies from the teardrop lattice gateway die. Diecut a paper using the largest gateway and adhere to the inside of the card base.

Stamp the hyacinth onto flower shaping paper using Cottage ivy and elderberry ink. Colour using bamboo leaves and sweet plum then diecut. Shape the outer leaves using the flower shaping tools. Stamp the hyacinth petals using elderberry ink, colour using sweet plum, colour the reverse. Place face down into the mold, spritz with water and run through the die cutting machine to shape. Glue the petals onto the flat diecut. Add a spot of dries clear glue to the centre of each and sprinkle with lemon chiffon prills. Adhere to the front of the card base.

Stamp the sentiment in black ink onto a tag and die cut. Adhere to the front of the card base and add a hyacinth petal to the top of the tag.

Stamp 4 of the large daffodil petals, 2 of the large frills, 2 of the small daffodil petals and 1 small frill onto flower shaping paper using desert sand ink. Colour the petals using buttercup archival ink, diecut, edge with sunflower and colour the reverse. Colour the frills using sunflower ink to both sides. Place face down into the mold, spritz with water and run through the die cutting machine to shape. Form the trumpet of the flower and glue together using dries clear adhesive. Push 3 stamens through the centre, and hot glue 2 sets of 3 petals to the base of the trumpet to create the daffodil.

Create 2 buds: Stamp the petals, colour and shape as for daffodil. Hot glue the reverse of the petals and bring them tightly together to form a bud. Position the daffoldils and buds onto the back panel of the card and hot glue into place.

Create a few green bows and add to the daffodils. Sponge adhesive onto the flowers and sprinkle with glitter.

Other Products: Spectrum Aqua blend pencils: Daffodil: Wheat, Sunshine, Strawberry, Coral. Leaves: Pesto Green, Oregano. Hyacinths: Hyacinth, Pesto Green. Other: Diamond stickles, Double sided tape, Double sided 3D foam tape, Inking Tool, Hot glue gun, Dutch Doobadoo or other crafting paste, paste spatula, Tim Holtz mask-Latticework THS019, Glimmer mist-Haunted Shadow 61180, Water spritzer, Hot Glue Gun.

Instructions: This card when finished, measures 6 1/2” x 8 1/4”. Taking the white card stock make a hinged tent fold card base to the above measurements.

Find a sheet for the matting of the card front in the paper collection. Trim this a little smaller than the card base measurement. Using the mask, latticework, crafting paste and a spatula to give texture to the matting. Once this is dry spray with the glimmer mist and spritz with water to get the color wanted. When this is dry adhere to the card front with the 3D foam tape or adhesive.

Taking the gold paper, the Decorative Cage die and the Regal Lattice Gateway die then die cut the background frames for the card front. Cut the cage background from the vellum. Adhere the layers to the card front.

Stamp, color, die cut and shape the daffodils, Hyacinths and borders used for this card. 1x straight boarder, 1x each daffodil size 2x the smaller Hyacinth and 1x each size of the 3D Daffodils. These Daffodils are clipped in at the flower edge so they curl over easier. See the color list for colors used. Use the Daffodil shaping mold and the golf tools to bring shape to the 3D daffodils Adhere to the card front.

To make the sentiment, use the white card stock, the sentiment from the Elegant Gateway Sentiments stamp set and the banner die from the Ticket and Tags die set. Stamp the sentiment then die cut the shape. Taking the gold paper, cut this to fit across the card so it is a matting for the sentiment. Spray the white card stock sentiment piece with the glimmer mist. When dry adhere this to the gold paper layer then to the card front. Adhere a Hyacinth to the right side of the sentiment.

To finish the card, apply the diamond stickles to the Daffodil supporting petals.

Other Products: Die cutting machine Cut’n’boss, heatgun, water mister, hot glue gun, hot glue, scissors, kraft wire string, ribbon, pearl, mesh, old bottle

Instructions: Make 2 daffodils (smaller size). Stamp onto cardstock paper in bright tangelo, colour the centre with the same color and add a touch of sunflower ink. Diecut with the coordinating die. Place facedown into the flower shaping mold, spritz with water and run through the diecutting machine to shape. Shape and assemble using your hands and tools to finalize the flower. Poke a hole in the centre of the flowers and add stamens, secure with hot glue. Also make 3 daffodils in the bigger size by stamping in sunflower ink this time.

Make a lot of little hyacinth flowers. Stamp your flowers with majestic violet ink onto deluxe flower shaping paper, color the flower with the same color and with paradise steal. Diecut with the coordinating die. Place facedown into the flower shaping mold, spritz with water and run through the diecutting machine to shape. Give further shape with Deluxe flower shaping kit tools. Take a metal rod and shape it with making tape all around it. Glue the flowers one by one to form a hyacinth cluster. Make 2 hyacinths.

Make leaves with the wild rose collection. Stamp and color using leaf green ink onto white flower shaping paper. Diecut with the coordinating die. Place facedown into the flower shaping mold, spritz with water and run through the diecutting machine to shape. Glue 2 leaves back to back on a wire.

Put violet mesh in your bottle. Arrange your flower in the bottle. Put some mesh, leaves and kraft wire through your arrangement. Tie a ribbon all around the neck of your bottle.

Use 2 circles from the Decorative circle Frame die. Die cut in violet and lilac paper. Ink the edge and stamp a sentiment on the smaller one. Glue it with 3D foam on each other. Glue 3 littles hyacinth flowers on it and add on the front of the bottle.

Other Products: White Cardstock, diecutting machine

Instructions: Cut a 6 x 6” card base from white cardstock. Cut out the 6 x 6” framed square of designer paper from the Spring Garden Paper Collection, distress with Vibrant Violet and adhere to card front. Cut out the Rounded Window Frame Die in white card stock, adhere to foam tape and adhere to card front.

Stamp the Fragrant Hyacinth Cling Stamp on Deluxe Flower Shaping Paper with Vibrant Violet and Summer Sky ink, sponge with same, and cut out with coordinating dies, sculpt with the 3D Hyacinth Shaping Mold. Stamp flower bases from the Fragrant Hyacinth Cling Stamp Set in Leaf Green, sponge with same and cut out with coordinating dies. Adhere the Hyacinth flowers to the card base.

Arrange flowers on front of card and adhere as pictured. Stamp and cut out the sentiment from the Celebrate Love Sentiments Cling Stamp Set with the Arrows and Banner Die, distress with Vibrant Violet and adhere with foam tape.

Other Products: Alcohol markers, diecutting machine

Instructions: Remove one circle from the 6" x 6" Round Bi-Fold Card blank and set aside. Horizontally score one of the circles remaining as the easel. Cover the separated circle with Spring Garden Paper Collection using Rounded Sunlight Window, then Rounded Eyelet Window on dots. Die-cut Rounded Window Die in purple designer paper and another in Luxe Gold cardstock and shadow the gold behind, mount on dots. Die-cut Decorative Circle Frame Eyelet circle in lilac and another in gold and shadow the gold behind and mount on dots. Adhere onto the easel.

Cover the bottom of the card blank Rounded Sunlight Window and Rounded Window Die on dots. Die-cut 2x Rounded Eyelet Window circles one in Luxe Gold and the other Spring Garden Paper Collection and shadow the gold behind adhere with Dries Clear.

Stamp in Stazon Delightful Daffodil onto white cardstock, Spring Daffodil and Fragrant Hyacinth onto Deluxe Flower Shaping Paper. Color with alcohol markers. Apply 3D lacquer to the white cardstock die-cuts and whilst wet sprinkle glitter. Run Spring Daffodil through the mold and snip into the ruffle top and using the Deluxe Flower Shaping Kit curl the tops inward. Add further dimension by creasing the tops with your fingers. Use hot glue to assemble the daffodil petals. Poke through the center and thread Pollen Stamens, cut off the excess wire and secure with hot glue.

Create the bouquet folding the Eyelet Circle into a cone shape and adhere to the front of the card. Add the daffodils and hyacinths using hot glue. Adhere the Daffodil Spray onto the bottom with dots this will act as a stopper for the easel. Die-cut the tag and stamp in Deep Purple ‘Happy Mother’s Day’. Finish with some glitter.

Other Products: Die Cutting machine, Trimmer or Guillotine, Score board, Scissors, Bone folder, Ranger Liquid Pearls - opal white, White Cardstock, Memento Dye ink pad - Grape Jelly, Pear Tart and Dandelion, Stampin’ Up! Ink pads - Wisteria Wonder or Highland Heather, Jane Davenport Silky Skin Colorstick

Instructions: Z fold card measures - 8 inches by 8 inches. To create a card base - cut out a 16” x 8” piece of White Card and score it at 4” and 8” inches (long side up), then fold using a bone folder along the score lines. Cut out the following pieces of HCDP1-2125 Spring Garden Paper Collection: 2 pieces 7 7/8” x 3 7/8” and 1 piece 7 7/8” x 7 7/8”, then ink the edges of each of the pieces with Memento Dye Ink Pad - Grape Jelly using HCDA1-449 Stack and Store Daubers and adhere them to the card base as shown. Die Cut the decorative shape of White Card using HCD2-7337 Teardrop Lattice Gateway Die and adhere inside of the card as shown. Die Cut the shape of White Card and HCDP1-2125 Spring Garden Paper Collection using HCD2-7337 Teardrop Lattice Gateway Die and, then stack and adhere them together on the card front. Die Cut 2 decorative frames of White Card using HCD2-7337 Teardrop Lattice Gateway Die, then stack and adhere them together to the card front using 3D foam.

Stamp the Hyacinth image from HCPC-3947 Fragrant Hyacinth Cling Stamp Set on HCPP1-475 Deluxe Flower Shaping Paper with TSMP708 Memento Dye Ink Pad - Olive Grove, then colour the image with Memento Dye Ink Pads - Bamboo leave and Pear Tart using 282873 Tombow Dual Brush Maker N00 Blender and HCDA1-449 daubers. Die cut the images with matching HCD1-7345 Fragrant Hyacinth Die and adhere on the left side of the card front using DDOTS 3D foam. Stamp the Hyacinth petals images from HCPC-3947 Fragrant Hyacinth Cling Stamp Set on HCDP1-2125 Spring Garden Paper Collection with TSMP708 Memento Dye Ink Pad - Grape Jelly, then colour the images with the same ink using HCDA1-449 daubers. Die cut the images with matching HCD1-7345 Fragrant Hyacinth Die, shape them with HCST1-401 Deluxe Flower Shaping Kit and adhere them to the Hyacinth flower as shown, then apply Ranger Liquid Pearls - opal white on the centre of each of the petals. Stamp the Hyacinth images from HCPC-3944 Delightful Daffodil & Hyacinth Cling Stamp Set on HCPP1-475 Deluxe Flower Shaping Paper with TSMP708 Memento Dye Ink Pad - Olive Grove, then colour the image with Memento Dye Ink Pads - Bamboo leave and Rose Bud using 282873 Tombow Dual Brush Maker N00 Blender.Die cut the images with matching HCD1-7342 Delightful Daffodil & Hyacinth Die and adhere them to the card front as shown. Stamp the pot image fropm HCPC-3905 Elegant Teapot & Florals Cling Stamp Set on HCPP1-475 Deluxe Flower Shaping Paper with Wisteria Wonder or Highland Heather Stampin’ Up! Ink pad and colour it with Wisteria Wonder or Highland Heather Stampin’ Up! Ink pad and Jane Davenport Silky Skin Colorstick using 282873 Tombow Dual Brush Maker N00 Blender. Die cut tea pot using matching die from HCD1-7288 Elegant Teapot & Florals die, adhere additional layer of white cardstock to the back and adhere the final piece on the right side of the card front. Die cut 2 decorative corners from HCGP1-488 Luxe Gold Cardstock using HCD1-7263 Swirly Accent Spray Die and adhere them to the card base as shown.

Stamp the leaf images from HCPC-3835 Leafy Accents Cling Stamp Set on HCPP1-475 Deluxe Flower Shaping Paper with TSMP708 Memento Dye Ink Pad - Olive Grove, then colour the image with Memento Dye Ink Pad - Bamboo leave using HCDA1-449 daubers. Die cut the images with matching HCD1-7193 Leafy Accents Die, then shape them using HCFB1-467 3D Leafy Accents Shaping Mold and HCST1-401 Deluxe Flower Shaping Kit. Stamp the Peony images from HCPC-3820 Large Sweet Peony Cling Stamp Set on HCPP1-475 Deluxe Flower Shaping Paper with TSMP708 Memento Dye Ink Pad - Olive Grove, then colour the image with Memento Dye Ink Pad - Dandelion using HCDA1-449 daubers. Die cut the images with matching HCD1-7174 Large Sweet Peony Die, then shape them using fingers and HCST1-401 Deluxe Flower Shaping Kit. Assemble Peony flowers using a hot glue gun, then adhere finished flowers to the card and fill in the composition with leaves.

As a final touch, apply Dries Clear Adhesive using Hydra sponge on selected leaves and flowers, then sprinkle them with Crystal Ultrafine Transparent Glitter, and leave card to dry completely.

Other Products: White cardstock, Big-Shot Machine.

Instructions: Card Size is 5” x 7” (final Size). Take pattern paper from the HCDP1-2125 Spring Garden Paper Collection, tear edges and adhere it on card base using Designer Dries Clear Adhesive.

Cut one Regal Lattice Gateway Die HCD2-7339 on white cardstock and cut it in half and adhere it on the card base using foam tape, as shown. Cut one strip of white cardstock size 2.25” x 7”. Take pattern paper from the same collection size 2.25” x 7”, tear the edges and adhere it on top of white strip cardstock. Cut another lattice die from same die set on white cardstock and the base die on pattern paper. Adhere it using foam tape.

Stamp some hyacinth flower petals from Fragrant Hyacinth Cling Stamp Set using archival ink-Majestic Violet, cut them with coordinating die and color them using archival ink-vibrant fuchsia and majestic violet. Shape these petals using 3D Hyacinth Shaping Mold HCFB1-497. Stamp another image from same stamp set using archival ink-library green, cut it with coordinating die and color it with leaf green and majestic violet. Assemble hyacinth petals on this image and create a hyacinth flower.

Stamp sentiment from Cheerful Note Sentiments Cling Stamp Set using archival ink-majestic violet on a strip of white cardstock and adhere it using Designer dries clear adhesive.