Instructions:

Make the card base using the slim elegant die set. Cut a piece of white card stock 8"  x 9". Fold in half and make a slim card base. Using the outermost die from the Slim Elegant Rectangle die set and keeping the upper age of the die above the fold line, cut out shaped slim card base.

Using the same die, cut a piece of pattern paper and add on the card front. Using the inner die cut out a gold inside base and on top of this add vellum paper. Cut out a window on the card front using the inner die and cut a gold border around the window. Cut the decorative border die from white cardstock and from luxe gold., adhere together slightly offset and adhere to the card front. Using the sentiment die from the Slim Ornate Rectangle die, cut out two sets of sentiment from the slim ornate die using white and gold paper added together gold on top and add inside the card.

Stamp the lily flower with pink peony in ink and colour with Rose Madder ink using dauber. Shape the flowers in 3D flower shaping mould and add additional shaping with Deluxe ball tool then layer two flowers together to form a single flower and add rock candy stamens. Make leaves with olive green ink and colour with leaf green ink. Cut with matching die.

Stamp the images from the Garden Lily Spray & Fillers set using jet black ink, colour using the Zig markers and die cut.

Arrange the flowers and the leaves along with the stamped images on the card front to finish the card.

Add a satin bow with tags cut from paper collection.

Other Products: Glue sticks, glue gun, die cutting machine, scoring board . Thin white satin ribbon.

Instructions:

Card size: 4 x 9”. Make a shaped card base using the outer die of the Slim Elegant Rectangle Die Set. Cut another front from yellow decorative paper then glue it to the card base.

Cut a white and a gold decorative Slim Elegant Rectangle including inside portion  Offset the white from the gold and glue pieces together. Glue the large die cut side to the card front, pop up the inside rectangle set to card front.

Stamp a piece of white with sentiment using embossing ink then sprinkle with gold and heat emboss.  Cut it out with circle then mat with gold and pop up on left side of inside rectangle.

Stamp lilies using Tiger Lily, sponge with same, New Sprout, and Sunflower, sponge with Buttercup. Die cut then shape in the mold. Glue 2 together for each flower, pierce centers and insert Petite Pollen stamen, (for the orange flowers I colored the ends of the orange pollen with a dark orange). 2 largest flowers have a yellow beaded stamen as well.  Glitter flowers.

Stamp the leaves and spray with Bamboo Leaves, sponge with New Sprout, on the unopen flowers (the Spray) use a little color on the ends, orange and yellow used for this sample. Die cut then shape in mold.

Stamp low basket using Rich Cocoa, color with Copic Markers in brown tones, die cut then pop up on card right side bottom. 

Arrange leaves and flowers coming out of basket, secure with hot glue. Make long drops with hot glue on a nonstick surface then cover with white Prills, after cooling fill in any spots with Dries Clear and more Prills. Lift from nonstick surface and insert into arrangement.

Other Products: White cardstock, foam sheet, Copic: YR04, Y15, E53, E31, E33, E35, E39, VersaMark, Hot glue

Instructions:

Its a ready folded card measuring 5 1/4" by 10 1/4", Trim a panel from Garden Lily Paper Collection measuring 5" by 10" and adhere on the card base using clear glue, Trim another panel on the cream cardstock measuring 4 1/2 by 9 1/2 inches and add on the card base using dimensional tape. Next trim last panel from the paper collection measuring 4 1/4" by 9 1/4" and add on the last panel using clear glue.

Die cut the frame on the luxe gold and cream card using Slim Eyelet Heart Rectangle Die, adhere together offset using clear glue and add clear card on the back. Next add foam strips on the inside window from the back, put some shaker element on the card center carefully and add this frame on the card and make shaker window.

Die cut sentiment on the cream card from the Slim Eyelet Heart Rectangle Die and add on the clear card using clear glue.

Stamp the image of bunches on vellum from Gargen lily Bouquet & Buds Stamp Set and Garden Lily Spray & Fillers Stamp Set using versamark embossing ink. Cover images with Snowflake Tinsel Embossing Powder, heat the image using Heat tool and die cut using coordinating die.

Stamp the Buds & fillers from Gargen lily Bouquet & Buds Stamp Set & Garden Lily Spray & Fillers Stamp Set on Deluxe Paper Using Leaf Green ink color the fillers with Pink Peony Ink, Vivid Chartreuse Archival & Mowed Lawn Distress Ink Using Daubers. Shape from back using shaping kit, cover with clear glue and magic glitter.

For the Lilies stamp the flower images using Rose Madar Ink on the yellow cardstock, die cut using coordinating dies, color the centers with Vivid Chartreuse and edges with Pink Peony using daubers, shape the flowers in shaping mold and finish shaping using shaping kit. Make a few flowers using hot glue, add pearl beads in the center using hot glue,  apply clear glue on the flowers add dress with Nida Tanweer Magic Glitter Powder.

Arrange all ready elements using hot glue as shown and embellish the card with decorative beads.

Other Products: Yellow Cardstock, Cream Cardstock, Vellum, Pearl beads, Versamark Embossing Ink, Nida Tanweer Magic Glitter Powder, Decorative Beads, Snowflake Tinsel Embossing Powder, Hot Glue Gun, Mowed Lawn Distress Ink, Shaker Elements.

Instructions:

Create a 4.25 x 9.25 inch card base in white cardstock. Cut a 3.75 x 8.75 inch piece of teal paper from the Garden Lily Paper Collection and adhere to card front. Cut the frame from the Slim Elegant Rectangle Die out of pale blue paper and adhere to card front. Cut the decorative die in white card stock and adhere. Cut out the center die in teal paper and adhere. Cut out the next smaller die in floral paper and adhere. Stamp the sentiment from the Cheerful Note Sentiments Cling Stamp Set in Jet Black on white cardstock and cut out with the smallest die in the Slim Elegant Rectangle Die, adhere to the next larger die cut from teal paper, adhere as shown.

Stamp the lilies from the Garden Lily Cling Stamp Set in Tea Rose, sponge with Sunflower and Tea Rose, cut out with coordinating dies and sculpt with the Garden Lily Shaping Mold, add stamens and glitter.  

Stamp the leaves from the Garden Lily Cling Stamp Set, the lily sprigs from the Garden Lily Bouquet & Buds Cling Stamp Set, and the lily sprigs from the Garden Lily Spray & Fillers Cling Stamp Set in olive and sponge with Tea Rose, Vibrant Fuchsia and Leaf Green, cut out with coordinating dies, sculpt with stylus and add glitter.

Adhere flowers and foliage as shown in photo.  

Other Products: White card stock

Instructions:

The ready top-fold slimline card from smooth cardstock measures 9 1/2" by 4 1/2". To prepare the card base, cut the paper measuring 9 1/2" by 9 " and score at 4 1/2" on 9" length and crease well.

For the card front, choose the pattern paper from the Garden Lily collection and cut measuring 9" by 4" and frame it with a panel cut from Luxe Gold cardstock, creating a delicate border of 1/16" on all four sides. Layer the panel on the ready card front using dimensional tapes. 

To decorate the card front, choose the paper from the designer paper collection and cut a window frame using the dies from the HCD3-7449 Slim Eyelet Heart Rectangle Die. Next, cut a white lacy frame using the same die set and glue it directly to the solid area of the window frame. Layer this frame on the card front using dimensional tape. 

Choose another coordinating paper and cut the smaller eyelet banner that fits inside the window, using the same die set. Also, cut the sentiment twice in white and once with Luxe gold cardstock. Stack all the words from the sentiments together keeping the gold on the top. Glue this sentiment on the smaller banner strip a little on the right-hand corner leaving enough space for the floral bouquet on the left side. 

For yellow-golden vellum Lilies, Stamp the flowers on Vellum Flowerite cardstock using Hero Arts Versamark ink and sprinkle golden heat embossing powder. Dust extras in the funnel tray and heat set the flower petals. Cut the petals using the coordinating dies. Color the petals using Mustard Seed distress Oxide and shape them using flower shaping tools. Form the flowers and prick the center to add Petite Pollen Stamens - Medium. Prepare 1 medium flower of 3 petals and 2 small flowers of 2 petals each. Also, white heat emboss the butterfly from Small Floral Butterfly Cling Stamp Set in the same way and cut it using the coordinating die. Color it using Wild Honey and Fired Brick Distress Oxide. Shape the butterfly a little with a needle tool for extra dimensions.

Stamp, color, and cut a few Wisteria flowers using Leaf Green Archival ink, color them in the center using the same ink and shape them using a flower shaping kit. Add flower beads using a glossy accent and use these flowers as fillers.

Stamp 2 sets of leaves using Leafy Accent stamp and Olive Green Archival ink and cut them using thecoordinating dies. Color the leaves using the same inks and shape them using a deluxe flower shaping kit. Once, all the elements are ready, assemble the card as shown. 

Other Products: Die Cutting Machine, Score Board, Bone Folder, Scissors, Smooth White Cardstock, Double Sided Tape, Flower Seeds, Glossy Accent, Tacky Glue, Hero Arts White Pigment Ink. Funnel Tray, Versamark Ink, Distress oxide Wild Honey, Fired Brick and Heat Gun

Instructions:

Cut a strip of white card 9” x 8”, score and fold in half at 4” to create a slimline card base. Place the large outer Slim Elegant Rectangle Die over the fold and die cut to create a shaped card base.

Die cut the large outer die in white and another in paper from the collection. Adhere these together and adhere to the front of the card base. Die cut in gold luxe card the large decorative die and adhere this frame to the card base.

Die cut the 2nd size centre die using patterned paper from the collection and adhere to a die cut of the largest centre die cut from gold luxe card. Adhere to the centre of the card base using foam pads.

Stamp the sentiment in black ink, cover in clear embossing powder, remove excess and heat to set. Die cut using the 2nd smallest centre die and adhere to the centre of the card base using foam pads.

Make the leaves: Stamp the leaves x4 onto paper from the collection using northern pine ink, die cut and add additional colour to the edges using a dauber. Place face down into the mold, spritz lightly with water, and run through the die cutting machine to shape.

Make the flowers: Stamp 2 large and 1 small lilies onto flower shaping paper using buttercup ink, colour lightly with buttercup ink and make a stroke line along the centre of each petal using copic Y26. Die cut and colour the reverse of the petals, place face down into the shaping mold, spritz with water and run through the die cutting machine to shape. Add more buttercup ink to edges and additional shaping using the flower shaping tools. Adhere 2 sets of 3 petals together, offsetting the petals, to create the flower. Varnish the petals using 3d lacquer. Take 3 bridal stamens and colour using Morocco ink, thread through the centre of the flower and keep as tall above the flower as possible, thread s grey wired bead stamen into the centre, position the stamens and adhere in place using hot glue.

Position the leaves and flowers on either side of the sentiment panel and secure with hot glue.

Other Products: White card, copic pen Y26, foam pads, clear embossing powder

Instructions:

The ready top-fold slimline card from smooth cardstock measures 9 1/2" by 4 1/2". To prepare the card base, cut the paper measuring 9 1/2" by 9" and score at 4 1/2" on 9" length and crease well.

For the card front, choose the pattern paper from the Garden Lily collection and cut measuring 9" by 4" and frame it with a panel cut from Luxe Gold cardstock, creating a delicate border of 1/16" on all four sides. Layer the panel on the ready card front using dimensional tapes. 

Next, cut one each of white and gold die-cut using HCD3-7447 Slim Elegant Rectangle Die. Glue golden die cut on the bottom a little off-center to create the shadow. Layer this die cut on the card front using tiny foam dots. 

For red gold Lilies, Stamp the flowers on deluxe flower-making cardstock using Versamark ink and sprinkle golden heat embossing powder. Dust extras in the funnel tray and heat set the flower petals. Cut the petals using the coordinating dies. Color the petals using Fired Brick Distress ink and shape them using flower-shaping tools. Form the flowers and prick the center to add Petite Pollen Stamens - Medium. Prepare 2 medium flowers of 3 petals each. Prepare 3 medium-sized flowers of 2 petals each. 

Stamp, color, and cut a few Wisteria flowers using Orange Blossom Archival ink, color them in the center using the same ink and shape them using a flower shaping kit. Add flower beads using a glossy accent and use these flowers as fillers.

Stamp the sentiment from Celebrate Love Sentiments Set using white pigment ink on Rajni Chawla’s Vellum cardstock and sprinkle white heat embossing powder. Dust extras and heat set the sentiment.

Stamp 2 sets of leaves using Leafy Accent stamp and Olive Green Archival ink and cut them using the coordinating dies. Color the leaves using the same inks and shape them using a deluxe flower shaping kit. Once all the elements are ready, assemble the card as shown and complete the card by the sentiment vellum strip. 

Other Products: Die Cutting Machine, Versamark ink, Score Board, Bone Folder, Smooth White Cardstock, Scissors, Double Sided Tape, Flower Seeds, Glossy Accent, Tacky Glue, Hero Arts White Pigment Ink. Funnel Tray, and Heat Gun

Instructions:

Make a 6" x 6" card base with white cardstock. Add pattern paper from the paper collection a little smaller than the card base. Cut two pieces of die cuts from the slim ornate die in white and gold card stock. Adhere the two together with the white die cut on top and off setting a little. Trim the die cut to get a thin border for the top and the middle of the card. Add this on the card front.

Stamp the lily flower images on vellum paper using white pigment ink and opaque powder and heat set using the heat tool. Cut using the matching die. Color at back part of the flowers and leaves with distress oxide inks. Spray little with water and shape the flowers and the leaves in the 3D flower shipping mold for the lilies. Emboss little further using the ball tool from the Deluxe flower making kit. Add rock candy stamens in the flowers and arrange the flowers and leaves on the card front.

Stamp a few leaves with olive green colour on white card stock colour with leaf green ink. Cut with matching die. Shape the leaves and tuck a few leaves with the arrangement.

Make filler flowers using the smallest flowers from the classic Rose stamp set. Stamp the smallest size flowers in olive green or leaf green ink on Flower shaping paper. Cut with matching die and shape with ball tool. Layer two flowers to make single flower. Add pearl stamens.

Arrange the flowers with the lilies.

 Add the sentiment using black ink.

Other Products: Seedless Preserve Distress Oxide Ink, peeled paint distress oxide ink. Glue Gun. Glue sticks, die cutting machine, scoring board

Instructions:

Ready side fold card measures 5.5" × 7.5". Cut a mat from designer paper collection measuring 5.25" × 7.25" , distress edges with matching ink and adhere it on ready card base. Cut another mat from designer paper collection measuring 4.75" × 6.75", distress edges with matching ink and adhere it on white cardstock which is 1/8 of an inch bigger on all four sides. Adhere it to card using dimensional tape. Cut 2 frames from white cardstock and 2 from luxe gold cardstock using Slim Elegant Rectangle Die. Cut both white frames into half and trim them, glue the pieces to make a frame measuring 4.5" × 6.5". Trim luxe gold cardstock frames and glue on the back side of white frame. Adhere this frame on card using foam dots. 

Stamp Garden Lily flower on deluxe flower shaping paper using magenta hue ink and sea grass ink. Cut with coordinating dies and paint using same ink. Stamp leaves from the same set using olive green ink and cut with coordinating die. Paint leaves using leaf green ink. Shape flowers and leaves using 3D Shaping mold. Pierce the centre of flower flowers and add stamens. Arrange flowers and leaves on card using hot melted glue. Once satisfied with arrangement, brush them with clear adhesive and sprinkle Rajni Chawlas's Crystal Clear.

Stamp Butterfly image on vellum paper using white ink and heat emboss using white embossing powder. Cut with coordinating die. Also cut one more butterfly from Luxe Gold cardstock. Glue both together and adhere it on card using foam dots. Cut tags from designer paper and white cardstock using die, stamp sentiment on one tag using magenta hue ink. Tie both tags using satin cord on the side of the card as pictured.

Other Products: Smooth white cardstock, Sea Grass Archival, Satin Cord, Pearl Beads

Instructions:

Create card base from HCD3-7447 Slim Elegant Rectangle Die. Cut one base die on white cardstock and on pattern paper from HCDP1-2145 Friendship Rose Paper Collection, adhere them together and then adhere it on card base.

Cut intricate die 6 times from HCD3-7447 Slim Elegant Rectangle die on white cardstock, paste all of them together and adhere it on card base. Add prills-lemon chiffon, ribbit, go man go, heart of gold, gala glitz-mauvie as a shaker. Now cover it with clear cardstock using designer dries clear adhesive. 

Now on top of this clear cardstock add one layer of HCD3-7447 Slim Elegant Rectangle die on white cardstock using designer dries clear adhesive.Now from the same set of die, cut label on luxe gold cardstock and another layer on white cardstock and add sentiment from HCPC-3848 Cheerful Note Sentiments Cling Stamp Set using archival ink-light house.

Stamp some flower petals from HCPC-3906 Small Wild Rose Cling Stamp on deluxe flower shaping paper using archival ink-magenta hue and cut it with coordinating die HCD1-7289 Small Wild Rose Die and color them using archival ink-magenta hue and leaf green. Shape them using Small 3D Wild Rose Shaping Mold. Create some small flowers. Add beads on small flowers.

Stamp some wisteria petals from HCPC-3911 Wisteria petals cling stamp set using archival ink- magenta hue, cut them with coordinating die HCD1-7295 Wisteria petals die, color them with archival ink-magenta hue, shape them using ball tool from deluxe flower shaping kit, add beads.

Stamp one leaf cluster from HCPC-3835 Leafy Accents Cling Stamp on vellum paper using white stamp and sprinkle white embossing powder and heat it, and cut it with coordinating die. Shape them using HCFB1-467 3D Leafy Accents Shaping Mold.

Arrange all flowers and leaves as pictured.

Other Products: Big Shot Plus Machine, Gala Glitz-Mauvie.

Instructions:

My card is a slimline easel card with a finished size of 4" x 8 1/2". Cut a piece of cardstock 8" x 8 1/2" and score at 2" and 4". Using the shadow piece for the Slim Elegant Rectangle Die cut a piece of white card stock and then using same die piece cut a piece of Sheet #3A of the paper collection and glue together. Now glue this piece to the 2" section. It will lie flat when folded and can also stand up on it's own. Cover the inside of the card with another piece of Sheet #3A. Cut a 2" strip of Sheet #6A to go on back part of the easel mechanics. Set aside to let everything dry. Cut the decorative outer section of the die using white cardstock and glue down onto the shadow piece. This makes an elegant frame for the flowers we are going to make.  

Cut one of the center pieces to sit on the inside of the card that will hold a smaller piece with the sentiment.  I cut it out of white cardstock and covered it with a piece of Sheet #6A then edged it with Rosebud ink. Adhere to the card using dimensional tape. Cut a smaller die cut to hold the sentiment out of white cardstock. Edge this piece with Rosebud and then stamp the sentiment with Rosebud. Glue to the larger piece.

Now let's work on the flowers. Stamp the flowers using Sap Green and then color with Sap Green in the center and Rosebud on the rest. Cut out with coordinating die. Stamp the leaves with leaf green and color with leaf green and then cut out with coordinating die. Edge in Leaf Green and Olive inks to highlight the leaves. Place leaves and flower petals on the mold and spritz with water then run through the die cut machine. Turn out to dry. Once dry poke a hole in the center of the flowers and add the stamen. Attach with hot glue and also I used some hot glue to help with the shaping of the flowers.

Decide on the placement of the flowers and leaves and glue down. When dry the card is ready to go.

Other Products: Archival Sap Green Ink, White Cardstock, Die Cut Machine, Hot Glue Gun, Dimensional Tape

Instructions:

From white paper, cut out the base from the Slim Gateway Rectangle Die set, then use the same die to cut the frame from the paper collection and adhere  to the base. From the same set, cut an openwork frame in white paper and glue it as shown o with bent middle elements.

Cut the lettering from the Slim Eyelent Heart Rectangle Die set out of white paper. then adhere on a transparent strip of paper, color with green ink using a pen with water.

To make lily, stamp flowers several times with Memento Rose Bud ink, then color them with the Archival Ink Rose Madder. Cut with coordinating die. Shape flowers with the Mold from the same collection. Fold the flowers and glue with hot glue. Add glue and add one yellow and a few red stamens in the centers. Then cover the center of the flowers and the stamens with a brush with yellow ink.

To make the leaves, stamp several times the leaves from the Garden Lily and Garden Lily Spray & Fillers with Memento Olive Grove ink .Cut with coordinating die. Color the flowers with a pink watercolor pencil. Color the leaves with Archival ink Olive. Form the leaves with the Mold from the same collection.

Glue everything as shown. Cover the flowers with glue and sprinkle with glitter.

Other Products: Cutting machine, paintbrush, hot glue

Instructions:

Prepare a white card base 4 1/2 x 9 1/2”. Die cut the largest die from the Slim Ornate Rectangle set on Gold card stock. Cut the next size out of white and adhere to the card.  Cut the inside piece from the Slim Eyelet Heart Rectangle set out of white and add foam dots to the back and adhere to the center of the card. Use Gold card stock and cut the words from the set and adhere to the right hand side of the card.

Stamp the lily flowers on white card stock with the Vibrant Fuchsia ink, color lightly with the Pink Peony.  Cut out with the coordinating die. High light the edges with more of the Vibrant Fuchsia and place in the matching mold to shape. Put a small hole in the center of the flower and add the stamen. Put 2 flowers together making one flower. Secure with hot glue.

Stamp the leaves on white with the Cottage Ivy ink.  Color with the Vivid Chartreuse.  Cut out with the coordinating die. High light the edges with the Emerald Green ink and place in the matching mold to shape.

Adhere all the leaves and flowers to the left side of the card.

To finish, add glitter to all the leaves and flowers.

Other Products: Paper Trimmer, Die Cut Machine, foam squares, Hot glue gun,

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 8” x 9”, score at 4” along the 8” side and fold to create a base card of 4” x 9”. Cut a piece of gold cardstock 3 7/8” x 8 7/8” and adhere to the front. Cut a piece of Deluxe Flower Shaping Paper 3 3/4” x 8 3/4” and adhere to the front of the card.

Die cut four outer decorative frames using the No. 2 die from the HCD3-7448 Slim Ornate Rectangle Die from Deluxe Flower Shaping Paper. Stack the dies together and add Frosting Powder with Dries Clear Glue on a sponge. Adhere to the front of the card. Dry emboss one centre of the decorative frame using the Orange Peel 3D Quilt embossing folder and adhere to the centre of the frame. 

Die cut 3 small decorative frames using the No. 3 die from the HCD3-7448 Slim Ornate Rectangle Die from Deluxe Flower Shaping Paper. Stack the dies together and add Frosting Powder with Dries Clear glue on a sponge. Adhere to the centre of the frame as shown.

Die cut sentiments out using the sentiment die from the HCD3-7448 Slim Ornate Rectangle Die - two from Deluxe Flower Shaping Paper and one from gold cardstock.  Stack the sentiments together with the gold sentiment on the top and than adhere to the middle of the card as shown.

Stamp the leaf images from the HCPC-31011 Garden Lily Cling Stamp Set in Versamark ink on vellum and heat emboss with white embossing powder. Colour the leaves on the front with Twisted Citron and Mowed Lawn inks and burnish the inks to allow the white embossing to shine and die cut with the coordinating die. Mist the leaves lightly on the backs and shape using fingers.  Adhere to the top left and bottom right of the card.

Stamp the flower images from the HCPC-31011 Garden Lily Cling Stamp Set in Versamark ink on vellum and heat emboss with white embossing powder. Colour the flowers on the fronts with Spun Suger and Pickled Raspberry. Burnish the inks to allow the white embossing to shine through and die cut with the coordinating dies. Mist the backs of the petals lightly with water and then shape using a pair of tweezers.  Assemble the flowers with two petals of each size and pierce the centres. Insert magenta and yellow rock stamens through the centres and fix with Dries Clear glue. Once set, trim the threads and adhere over the leaves as shown.

Add Crystal Clear glitter using clear gloss gel medium and a paint brush.

Other Products: Ranger White Embossing Powder, Versamark ink, Distress Oxide inks - Mowed Lawn, Twisted Citron, Spun Sugar, Picked Raspberry, Tweezers, Amazing Paper Grace Orange Peel 3D Quilt embossing folder, Clear gloss gel medium, paint brush

Instructions:

Fold white cardstock to 4  x 9 1/4" with fold on the side then use the biggest die from the Slim Gateway Rectangle Die to cut leaving the left side of the die over-hanging fold by about 1/4". Cut a full front with the same die from the white cardstock and another one from the Garden Lily Paper Collection. Glue them on. Cut out a silver and a white frame with the die No. 2 from the Slim Gateway Rectangle Die. Stamp the sentiment with the Just For You stamp in Fern Green ink and cut it out with the smallest die from the Slim Elegant Rectangle Die Set. Adhere all elements to the base.

Stamp blossoms from the Garden Lily Cling Stamp Set in Magenta Hue ink onto Deluxe Flower Shaping Paper, color their edges with the same ink and their centers with the Leaf Green ink, diecut with coordinating dies and shape with mold. Add Rock Candy Small Stamens to all flowers. Stamp blossoms from Lush Lilac Stamp Set in Leaf Green ink onto Deluxe Flower Shaping paper and diecut with coordinating die. Shape them with Deluxe Flower Shaping tools and add some Minnie Pearls Prills. Stamp 6 branches from Cottage Tree 'scapes Cling Stamp Set in Fern Green ink, color them with Leaf Green ink and cut out with coordinating die. Stamp 5 branches from Classic Rose Cling Stamp Set in Fern Green ink, color them with Leaf Green ink, cut out with coordinating die and shape with coordinating mold. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers. Add some self-adhesive crystals.   

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, sisal, colored pencils, self-adhesive crystals

Instructions:

The finished card measures 9 x 4 inches. Cut one piece of white cardstock in deluxe flower shaping paper 9 by 8 inches and score at 4 inches to make a top fold card. Place  Slim elegant rectangle die about 1/2" up past fold so that fold does not get cut. Use the same die again on a piece of paper #5B from the Garden lily collection. Ink the edge with library green ink and glue it to the folded card matching bottom and side edges.

Die cut 3 times the second biggest die from the same kit in the Deluxe Flower Shaping paper and glue them on each other to make a thick white cardstock. Glue it on the card. 

Stamp your Lily flowers with magenta hue ink onto white flower shaping paper, color the center and shade the edge with the same color. You can also color the back of the flowers. Diecut with the coordinating die. Place face down into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe flower shaping kit tools. Glue 2 layers together. In the center of the flowers make a hole and add stamens. With a brush add a little bit of 3D crystal lacquer on your flowers. Add glue on the tips of the flowers add dip it into crystal clear powder. Redo the same thing to make other flowers in seagrass ink color.

Also stamp and die cut leaves with leaf green and color the center with a bit of library green ink. Use the mold to give shape to your leaves.

In deluxe flower shaping paper die cut 2 tags of different size from the same die kit. Ink the edge of the smaller one in magenta hue ink and stamp in the same color sentiment from the Thank You sentiments cling stamp set. Glue them on each other with 3D foam dots. Add it to the right of your card.

Put cheesecloth and sewing thread on the left of your card and make a bouquet arrangement on it. For the final touch, glue on your pattern paper on the stamen and add crystal clear powder on it.

Other Products:  Die cutting machine Cut’n’boss, heat gun, water mister, hot glue gun, hot glue, scissors, sewing tread, cheesecloth, sewing threat,  library green archival ink, sea grass archival ink,

Instructions:

Cut a piece of white cardstock to 7 1/2” x 9 1/4” and score in half at 3 3/4” to form a top fold slim line card base. Using the largest die from the HCD3-7447 Slim Elegant Rectangle Die set, cut through both layers making sure that the die falls over the top of the folded edges to prevent from cutting the fold line. This will create the shaped card base. Next using the same die cut 2x, cut once from white cardstock and once from sheet 9B from the HCDP1-2147 Garden Lily Paper Collection. Glue the white layer to the card front. Using the HCDA1-449 Stack & Store Daubers ink the edges of the pink piece (you will do this to the second pink piece in the project as well) with Magenta Hue archival ink before gluing it to the card front. Now with the second largest die from the Slim Elegant Rectangle Die Set cut a piece from sheet 4B and from Luxe Silver Cardstock. Layer and adhere these offsetting them so that the silver peeks out behind the floral paper, glue to the card base. Using sheets 6B, 9B, and 4A from the paper pad along with Luxe Silver Cardstock cut the multi layers from the smaller layering dies in the die set, as shown. Before gluing each set together, stamp the sentiment from the HCPC-3846 Thank You Sentiments Cling Stamp Set in Magenta Hue. Create the three layers and attach them with 3D foam dots in between to add dimension.  

Using the HCPC-3948 Sweet Magnolia Cling Stamp Set stamp the small magnolia stamp 2x and the medium magnolia  1x onto Deluxe Flower Shaping Paper with Magenta Hue Archival Ink. Next stamp the HCPC-3835 Leafy Accents Cling Stamp Set 1x in Olive Archival Ink. Cut out using the coordinating die sets. Color the centers of the flowers with Vivid Chartruse Ink and the edges of the flower petals with Magenta Hue. Color the leaves with Leaf Green and Olive Archival Inks. Now shape all the flowers and leaves with the coordinating 3D Shaping Mold. Then using the Deluxe Flower Shaping Tool Set add some texture. Poke a hole in the center of each flower with a golf tool and add HCS1-458-2 Bright Pearl Stamens - Medium making sure to secure them with hot glue. Lastly, add Dries clear glue to the petals with a hydra sponge and generously add Rajni Chawla’s Crystal Clear Glitter.

Stamp the smallest dragonfly from the HCPC-3983 Decorative Dragonflies Cling Stamp Set with Watering Can Archival Ink and color with detailed brushes using Magenta Hue, Sunflower, and Leaf Green Archival Inks. Cut out with the coordinating dies then glitter with Crystal Ultra Transparent Glitter. 

To assemble, layer a small bunch of leaves in the bottom left hand corner of the card. Then arrange the 3 blooms atop securing them with a glue gun. Add the dragonfly as a finishing touch. Complete the inside as desired.

Other Products: Watering Can Archival Ink, 3D Foam Dots, Glue Gun, Glue Sticks, Scissors, Paper Trimmer, Die Cut Machine

Instructions:

Card size is 4 x 9”. Score and fold 8 1/2 x 9 1/2” white cardstock at 4 1/2”, place the largest Slim Gateway Rectangle Die just over the fold and diecut to get a shaped card base. Using the same die, cut two more times. Trim the left side of one, stamp the ‘You are in our Thoughts & Prayers’ sentiment from the Cheerful Notes Sentiments Cling Stamp set using Cactus Flower ink and adhere to the inside of the card. Adhere the other diecut to the card front using dries clear adhesive. Using the decorative Slim Gateway Rectangle Die, cut from white cardstock, stamp the ‘In Sympathy’ sentiment using Cactus Flower ink, sponge with dries clear adhesive and cover with Rajni Chawla’s Crystal Clear glitter. Add some shape to the gate using your fingers while it’s still wet. 

Stamp the floral spray from Garden Lily Spray & Fillers Stamp set on Deluxe Flower Shaping Paper using VersaColor white pigment ink, cover with Opaque Embossing Powder – White and heat set using the Heat It Tool. Color with Cactus Flower and Olive inks using Fantastix Blending Tools and diecut using the coordinating die. Diecut four more times, adhere behind the stamped image to create dimension, sponge with dries clear adhesive and sprinkle with Crystal Clear glitter. Adhere to the card base behind the gate using dries clear adhesive. 

Stamp the Garden Lilies on Deluxe Flower Shaping Paper using VersaColor white pigment ink, cover with Opaque Embossing Powder – White and heat set using the Heat It Tool. Color using Cactus Flower ink, diecut using the coordinating die and shape in the 3D Garden Lily Mold. At this point, I had forgotten to add some color to the backs of the flowers so I took a dauber and added some Cactus Flower ink to the embossed backs and got a really pretty effect. Adhere two petals of the same size together, offset, to create the lilies. Using the Groove Golf tool, pierce a hole in the flower centers, insert the Petite Pollen Stamens and secure with hot glue. I used the white stamens, sponged them with dries clear adhesive, dipped them in the Crystal Ultrafine Transparent Glitter and added a dab of Cactus Flower ink to the tips. Stamp the Garden Lily leaves using Archival Olive ink, color using the same ink, diecut, add more ink to the edges and the back of the leaves and shape in the 3D Garden Lily Mold. 

Using a paint brush, brush the flowers and leaves with watered down dries clear adhesive and cover with Rajni Chawla’s Crystal Clear glitter. Adhere the flowers and leaves to the card front as shown. 

Other Products: Diecutting Machine, White Cardstock, Misti, Hot Glue Gun, Funnel Tray, Paint Brush

Instructions:

To make this 9" x 4 1/2" tent fold card, take a 12" x12" sheet of Deluxe Flower Shaping Paper, cut to 9" x 9", score at 4 1/2" on one side and fold in half. Cover with a sheet of patterned paper from the Garden Lily Paper Collection, cut to 9" x 4 1/2".

Die cut in white card, two outside edges from the Slim Eyelet Heart Rectangles Die Set, one in pink and one in green papers, from the Garden Lily Paper Collection. Cut the pink die-cut in half across the middle. Die cut two inner Slim Eyelet Heart Rectangle dies from the same set, in white card. Die cut one Eyelet Edge die (7" x 2") in white card, die cut the inner straight edge rectangle that fits inside, in green paper. Die cut the Birthday sentiment in pink paper.

Adhere the green frame to the two halves of pink paper, one at the top, one at the bottom. Adhere the white Eyelet Heart die-cut to the green frame. Cut the spare Eyelet Heart Rectangle in half, across the middle, adhere behind the pink frame, top and bottom. Adhere all this to the card front. Adhere the white Eyelet Frame (7" x 2") to the center of the card. Adhere the green die-cut piece inside the frame. Carefully adhere the Sentiment into the middle.

To make the Lilies, stamp onto Flower Shaping Paper, the Garden Lily cling stamp set. Stamp two sets of leaves in Ranger Archival Olive ink. Stamp two sets of Lilies, one set in Olive and one set in Vibrant Fuschia. Color with Olive and Vibrant Fuschia inks using Daubers. Die cut with the matching dies. Place in the Lily Flower Shaping Mold, lightly mist with water and run through a die-cutting machine. Tap out and lightly shape, on the reverse with the stylus from the Deluxe Flower Shaping Kit. Color the Lily Leaves with Olive ink using a Dauber to add color dimension. Add dots of green ink to the centers of the green Lilies using a pen from the Zig Clean Color Brush Pens set, in Deep Green. Pierce a hole into the middle of the Lilies and thread three Bright Bead Stamens in green, through two layers of petals. Offset the petals and add Dries Clear Glue as you go, cut off the excess wires. Make two medium Lilies, one in pink, one in green. Make three small Lilies in pink and two small Lilies in green.

Stamp two Garden Lily Sprays in Vibrant Fushcia ink and two Filler Sprays in Olive ink, both from the Garden Lily Spray & Fillers Cling Stamp Set. Color with the same inks using Daubers. Lightly shape on the reverse with the stylus from the Deluxe Flower Shaping Kit. Adhere two Lily Sprays and two Filler Sprays to opposite corners of the card using Designer Dries Clear Adhesive. Adhere Lilies with hot glue. Adhere the Lily Leaves around the Lilies. Sponge Dries Clear Adhesive over Lilies and Leaves. Add clear glitter. All done.

Other Products: Score board, white card, paper piercer, water mister, die cutting machine, hot glue, clear glitter.

Instructions:

Patterned paper sheet 3B is the background for this 12 x 12" layout. From the Slim Elegant Rectangle Die Set cut 2 of each: the largest die from dark teal cardstock, the next smaller decorative image and the inside of that from white cardstock. The smaller inside piece from teal striped patterned paper. Adhere the 2 larger die cut pieces together and the 2 smaller die cut pieces together. Then add the middle section to the larger pieces using foam tape.

Adhere your layered die cut pieces to the left hand side of the layout. Mat the photo in white cardstock and add white photo corners to the photo. Adhere to the layout using 2 layers of foam tape. 

Die cut out the "Sweet" title using the Letters and Numbers Die and white cardstock. Adhere to the right hand side of the layout using liquid adhesive. 

Stamp and die cut 3 sets of the smaller Garden Lily flowers, and 2 of the leaves using an embossing pad onto vellum cardstock. Add white embossing powder and heat. 
Add color to the flowers and leaves using ink (Stampin Up: Regal Rose, Certainly Celery) on the backside of the vellum using daubers. Shape and assemble the flowers using the coordinating 3D Shaping Mold. Poke a small hole in the middle of the flowers and add the yellow stamen to each. Add the flowers across the layout and around the matted photo. Then snip apart the leaves and place around the flowers. Add pink pearls around the flowers and to the die cut pieces for a little extra shine.

Other Products: Stampin Up Ink (Regal Rose, Certainly Celery), Embossing Pad, White Embossing Powder, Pearls, Cardstock (White, Dark teal), Scrapbook Adhesives by 3L (Creative Photo Corners White, E-Z Runner Ultra, Crafty Foam Tape, Adhesive Dots Medium, Adhesive Dots Mini)

Instructions:

Score a 9" x 8" piece of deluxe flower shaping paper at 4" and fold at the score line to create a 9" x 4" card base. Use the largest die from Slim Eyelet Heart Rectangle Die to cut this card base so that the fold line is inside the cutting edge of the die. Die cut a piece pattern paper from Garden Lily Paper collection using the same die and adhere it on the cardbase. Die cut pieces of white cardstock and pattern papers using rest of the dies in this die set. Layer and adhere them as shown using double sided foam tape where required to add dimension. 

Die cut 4 sets of white cardstock using the sentiment die from the same die set and adhere them together. Colour the top most die cuts with brustro pearl gold metallic watercolor. Adhere this on the card as shown.

Other Products: Brustro metallic watercolours and double sided foam tape

Instructions:

Fold white cardstock to 4.5  x 9 1/4" with fold on the side then use the biggest die from the Slim Ornate Rectangle Die to cut leaving the left side of the die over-hanging fold by about 1/4". Cut a full front with the same die from the white cardstock and another one from the Garden Lily Paper Collection. Glue them on. Cut out a silver and a white frame with the die No. 2 from the Slim Ornate Rectangle Die. Cut out a white and a silver frame with the die No. 3 and a white sentiment from the same set. Adhere all elements to the base as pictured.

Stamp blossoms from the Garden Lily Cling Stamp Set in French Ultramarine ink onto Deluxe Flower Shaping Paper, color their edges with the same ink and their centers with the Leaf Green ink, diecut with coordinating dies and shape with mold. Add Rock Candy Small Stamens to all flowers. Stamp blossoms from Cottage Garden Hydrangea Cling Stamp in French Ultramarine ink onto Deluxe Flower Shaping paper and diecut with coordinating die. Shape them with Deluxe Flower Shaping tools and add some Ribbit Prills. Stamp 8 branches from Cottage Tree 'scapes Cling Stamp Set in Fern Green ink, color them with Leaf Green ink and cut out with coordinating die. Stamp 2 branches from Classic Rose Cling Stamp Set in White ink onto Vellum paper, use Opaque Embossing Powder, then heat emboss them and diecut with coordinating die. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers. Add some self-adhesive pearls.  

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, sisal, colored pencils, self-adhesive pearls

Instructions:

Ready tent fold shaped card measures 9" × 4". Cut a folded card from white cardstock using a shaped die from Slim Rectangle Ornate die set. Also cut a mat from white cardstock and designer paper using the same die from the set. Distress edges of designer paper mat with matching ink. Glue designer paper mat on white cardstock mat and adhere it on folded card. Cut a decorative frame from white cardstock and Luxe Gold cardstock using a die from the same set. Glue both together and adhere it to card using dimensional tape. Also cut a frame from designer paper. Glue inside piece on card using dimensional tape as shown in the picture. Cut a frame from white cardstock and a frame from vellum paper using the second frame die from the same set. Glue vellum strip on white cardstock strip. Trim the white cardstock frame and glue on strip as pictured. Adhere to card using dimensional tape. Cut the sentiment from Gold cardstock and white cardstock using a die from the same set. Glue sentiment die cut on card as pictured. 

Stamp Garden Lily flower on deluxe flower shaping paper using magenta hue ink and sea grass ink. Cut with coordinating dies and paint using same ink.  Stamp leaves from the same set using olive green ink and cut with coordinating die. Paint leaves using leaf green ink. Shape flowers and leaves using 3D Shaping mold. Pierce the centre of flowers and add stamens. Arrange flowers and leaves on card using hot melted glue. Once satisfied with arrangement, brush them with clear adhesive and sprinkle Rajni Chawlas's Crystal Clear.

Stamp Butterfly image on vellum paper using white ink and heat emboss using white embossing powder Cut with coordinating die. Also cut one more butterfly from Luxe Gold cardstock. Glue both to card using foam dots. For a finished look, glue a bow of white satin cord and beads. 

Other Products: White Cardstock, Seagrass Archival, Satin Cord, Beads

Instructions:

Score 8.3 x 11.7 inch size paper in half along the short side. Place the outer Slim Elegant Rectangle Die over the folded card with one edge slightly over the folded side and die cut to create the shaped card. Cut single piece using this same die from patterned paper and place into card using Designer Dries Clear Adhesive. Die cut an outer frame from silver Cardstock and add to the front of the shaped card using Adhesive Foam Strips. Die cut an outer frame from patterned paper and stamp sentiment using Elegant Rose Sentiments Cling Stamp Set on the white paper with Ranger Archival Ink Pad - Jet Black, place onto the card using adhesive foam strips.

To create Lily flowers, stamp Garden Lily Cling Stamp Set on white paper with Ranger Archival Ink Pad - Majestic Violet and cut using the coordinating dies. You will need 2 bigger and one smaler petals of each to create flowers for bigger flower use the biggest stamp, for smaller flower use smaller size stamp. Colour the flower with Ranger Archival Ink Pad - Majestic Violet using a sponge dauber. After colouring, place the flowers into the mold and run through cutting/embossing machine. Pierce the center and glue in some stamens using hot glue gun. Add a little hot glue to the underside of the flowers. Add dries clear adhesive around flower stamen. Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

To create leaves stamp the Garden Lily Cling Stamp Set and on the white paper with Ranger Archival Ink Pad - Leaf Green, cut out with the coordinating die, shade use this same ink and shape using mold. Sponge the leaves with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine,