Instructions:

Card size is 4 3/4 x 6”. Cut cream cardstock to 9 1/2 x 6, score at 4 3/4”. Cut plaid paper from sheet 11A of paper collection, to 4 3/8 x 5 5/8”, then yellow paper from sheet 10A, to 4 3/16 x 5 3/8”. Adhere together using Dries clear adhesive, then diecut octagon opening using small plain die from HCD1-7369. Stamp sentiment as shown using Light House ink. Use this as a template to mark on your cream card front where you want to diecut it, die cut using same octagon die, then fold card base. Diecut intricate center from same die set onto cream cardstock and adhere on the inside of card. Die cut four Octagon frames using the 5th & 6th largest dies from HCD-7367 Simple Centerpiece die set, adhere these together for a thicker frame. Apply a light touch of sepia ink onto the edges, then apply Dries Clear glue onto a hydra sponge to apply Rajni Chawla’s Crystal Clear onto frame for a fun sparkly affect. Adhere onto opening on card base.

Using the HCD1-7375 Seasonal wreath die, diecut the wreath base using the soft green paper from sheet 10A of paper collection and then a second one using the leafy background panel from the same sheet. Layer these two together using foam dots with the soft green base as your top layer. Next, diecut the leafy holly layer from same die set using dark green paper, sheet 10B of paper collection. Layer this onto wreath base using foam adhesive. Die cut the small bow outline die from kraft paper and the thin bow accent using the Luxe Gold cardstock, adhere together and adhere this onto wreath using a thick foam dot. Finally from same die set, diecut 2 sets of the pine accents using Luxe Gold cardstock.

Stamp the images onto white cardstock. From HCPC-3967 Winter wreath accents, stamp 2 sets of the holly leaves and 2 sets of the pine boughs using Library Green ink. Stamp the berry sprig and berry cluster using sepia ink, x3. From HCPC-3966 Autumn Wreath Accents, stamp the owl in sepia ink as well. Diecut all images with their coordinating dies.

Use Stack and Store daubers along with the following inks to color the images. For the holly leaves use a combination of Vivid Chartreuse, Leaf Green and Olive inks. Use Olive and Library Green for the pine boughs. Color two of each of the berries using Light House ink, and the remaining berry set in Sunflower ink. For the owls you’ll want to apply Sepia and a soft touch of Sunflower ink. Shape all images using Deluxe Flower Shaping kit. If desired use scissors to add fine snips into the sides of pine boughs for a needled affect. Cut apart images as needed and start layering the images on wreath base, tucking some images behind the leafy holly layer and some images on top to create a nice full look, securing with hot glue. Add the small gold pine accents as shown on the wreath, adhere the owls on the back side of wreath with foam adhesive. Apply touches of Dries Clear glue and sprinkle with Poupon glitter for a fine glittered affect, then tap off.

Other Products: Cream cardstock, white cardstock, Poupon glitter, hot glue, foam adhesive, score pal measuring and scoring board, scissors, paper trimmer, funnel tray, acrylic block, die cutting machine

Instructions:

Score and fold a 6” x 12” piece of white card at 6” to create a square card base, place the largest Simply Elegant die over the fold and die cut to create a shaped card. Score and fold the front in half and fold the outer edge backwards. Cut the same die again with white card and with paper from the collection, adhere together and adhere to the top portion of the card base to create an easel card.

Die cut the largest decorative die adhere to the front of the easel and edge with northern pine ink. Die cut the largest solid die and trim to fit the base of the card. Adhere into position and edge with northern pine ink. Hot glue 6 pearls to the edges of the base.

Die cut the smallest solid die from the simply elegant die set using white card and paper from the collection, adhere together, edge with northern pine ink. Adhere a die cut of the smallest decorative die and adhere into the centre. Add to base of the card using foam pads to create a stopper for the easel.

Stamp the hearts x3 onto white stamping card using espresso truffle ink and colour using red copics (R22, R24, R27), die cut and shape using the flower shaping tools.

Stamp the largest double leaves x4 onto flower shaping paper using olive grove ink, colour using toffee crunch and cantaloupe ink, die cut and add bamboo leaves ink to the edges, shape using the flower shaping tools.

Stamp the largest accent fillers x2 onto white stamping card using peanut brittle and colour using copics (YG01,Y15,Y00, YR04) die cut and shape using the flower shaping tools.

Stamp the smaller accent fillers x3 onto white stamping card using rich cocoa ink, colour using copics (RV11, BV02, R56), die cut and shape.

Die cut the wreath using white card and darkest green paper from the collection, adhere together and add to the card front using foam pads. Cut a sentiment strip from the paper collection and adhere at each end across the centre of the wreath so that the paper lifts in the centre.

Build up the wreath using the diecut and shaped elements and secure with dries clear adhesive. Sponge adhesive over the wreath and sprinkle with crystal clear glitter, remove excess and add the hearts around the wreath.

Die cut the smallest solid bow using paper from the collection and colour using copic markers to create a red bow. Die cut the decorative bow using white card and colour using a darker red colour. Adhere together, shape and hot glue to the bottom of the wreath.

Other Products: White card, green flat backed pearls - The Hobby House, Copic pens

Instructions:

Make a Gatefold card base from white card stock. Cut White card stock 12" by 6" and score at 3” and 9” on the longer side. Fold to make a gatefold card.

Cut pattern paper to add on the front sides and the inside of the card. Cut 4 pieces pattern paper from the Seasonal Wreath Paper collection, 2 3/4" by 5 3/4" for front side panel and inside gate panel. Cut one piece 5 3/4 “ by 5 3/4" and adhere all the panels in the card and on the front.

Cut two swirly Accents Spray die in Luxe Gold card stock using the bigger die from the die set. Cut one piece of Eyelet Circle frame from the Eyelet circle and basics die set.

Cut a square piece of white card stock 4“ by 4” and cut a mat layer a little smaller than the white piece and adhere the two pieces together. Add this piece on the left gate, on the centre. Do not add glue to the right gate. Add the circle eyelet die on top. Adhere the swirly spray die cuts on the two side gate panels.

Cut two pieces of Seasonal Wreath die cut from Deluxe flower shaping paper. Color them with a blend of Leaf Green and Rose Madder using sponge daubers.

Add this wreath on the square panel on the card front. Stamp the leaves from the Autumn and Summer Wreath stamp set with Library green ink on deluxe flower shaping paper. Shade these with Leaf green ink. Cut with coordinating die and shape with deluxe flower shaping kit.

Stamp the birds, flowers and bees and butterflies with Jet Black Archival ink on Deluxe flower shaping paper and color with Zig Real Brush pens. Cut with matching die.

Stamp the Rustic Sunflower images on the flower shaping paper with Sunflower ink and colour using the sponge dauber. Cut with matching die and shape the flowers in the 3D flower shaping mold for sun flower. Further shape the flowers with the ball tool. Layer two flowers together with glue and add black prills in the center. Add the green prills in the smaller flower.

Arrange all the flowers, leaves and other elements beautifully on the wreath base, using hot glue gun.

Complete the card by adding a sentiment from the paper collection. Cut the sentiment and a dd a mat layer of gold card stock at the back and add to the card.

Other Products: white card stock, hot glue gun, hot glue sticks, scoring board, die cutting machine

Instructions:

Create a 5 x 7" card base with white cardstock. Cut a 4.5 x 6.5" green piece of designer paper from the Seasonal Wreath Paper Collection, distress with Library Green and adhere.

Cut the decorative die from the Decorative Circle Frames Die set in white and Luxe Gold cardstock, cut in half and adhere together off set to show Luxe Gold underneath, adhere one half to each side of card, as shown.

Cut out the green frame from the paper collection, distress with Library Green and adhere to the center with foam tape.

Cut out the outer wreath with the Seasonal Wreath Die in dark green paper from the paper collection and Luxe Gold cardstock and adhere them together off set with foam tape. Adhere to the center of the card.

Stamp the owls, leaves and acorns from the Autumn Wreath Accents Cling Stamp Set in Jet Black on Bristol Smooth paper, color with Zig markers and cut out with coordinating dies. Sculpt with Deluxe Flower Shaping Kit and add glitter.

Cut out the detail bow from the Seasonal Wreath Die in Luxe Gold.

Stamp the Rustic Sunflower Cling Stamp Set in Buttercup, cut out with coordinating dies and sponge with same, sculpt with the 3D Rustic Sunflower Shaping Mold and add prills and glitter.

Adhere owls,acorns and colored leaves with foam tape and flowers and bow as shown in photo.

Other Products: White cardstock, Bristol Smooth cardstock

Instructions:

Use A5 card blank, cut white cardstock 5 3/4 x 8 3/16” adhere 4 (door) panels made up of white cardstock consisting of 3 mat and layers 2 1/4 x 3 1/4”, 2 1/8 x 3 1/8”, 2 x 3”. Leave a gap in the centre of 1”.

Paint one coat with chalk paint Americana Décor Vintage. Adhere onto A5 card blank with foam strips.

Cut letterbox in Luxe Gold 2 x 3/4”, 1 7/8 x 5/8” adhere together and cut door-knocker and door-knob plate both from Window Hinges Die Set. Thread brads through knocker and adhere pearl gem door-knob.

Die-cut Seasonal Wreath in white cardstock and another in Seasonal Wreath Paper Collection 3B adhere together and edge in Carnation Red. Die-cut the bow in contrasting red cardstock from stash.

Stamp onto white cardstock Autumn Wreath Accents in versafine sepia and clear heat emboss. Colour die-cuts with Zig Clean Color Real Brush Markers and watercolor brush. Shape die-cuts with the Deluxe Flower Shaping Kit and adhere to the wreath with hot glue and dots for dimension. Add gel pen to the owls eyes and beak. Add gems to the centres of the flowers, add dries clear and crystal clear.

Cut Seasonal Wreath Paper 3B edged in Leaf Green to fit inside the card and adhere. Cut a decorative panel from the paper collection 3A edge in Leaf Green and mat onto Luxe Gold cardstock 3 3/4 x 5 3/4” adhere together and adhere to the inside the card. Stamp in Leaf Green within the panel ‘To the word you may be one person but to me you are the world’ from the For My Friend Sentiment Stamp set.

Other Products: Hot glue, paper trimmer/scissors, chalk paint, gems, gel pens, brads, versafine sepia, clear embossing powder

Instructions:

Card size: 5 1/2 x 5 1/2". Use the outer die of the Simply Elegant Centerpiece to cut a folded 5 3/4 x 5 3/4" white heavy weight card leaving top part of the die off the edge of fold about 1/4". Use the outer die again to cut green plaid decorative paper and another white cardstock piece then glue to top of card matching edges. Cut the large inside decorative part of octagon from light green decorative paper then pop it up onto card front.

Stamp all the pieces (at least 2 times) of the summer wreath and the (congrats on decorative paper) using Tuxedo Black on white cardstock, die cut all, color with Copic Markers. Cut Seasonal Wreath outline from green, pop up on center of card.

Arrange leaves and flowers around wreath, leaving room at the bottom for the birds and nest. Glue and pop up some of the pieces around wreath, pop up nest and birds then add tag and ribbon under nest. Add the little hearts to the center of wreath. Glitter the wreath and card, add some lacquer to some leaves.

Other Products: White cardstock, Copic Markers: RV10, RV02, RV63, YGO3, YG25, YG61, G82, Y11, Y15, Y38, V12, V15, R21, R22, B21, B24, E21, Ribbon

Instructions:

Cut a piece of 5" x 7" pattern paper from Seasonal Wreath paper Collection and adhere it on a same sized card base. 

Stamp the images 4 times from Winter Wreath Accents Cling Stamp Set with Versamark ink on watercolor cardstock and heat emboss unsing Gold embossing powder. Color them using watercolors and die cut them using matching die from Winter Wreath Accents Die. Thread a piece of gold twine from the holes in the ornaments and adhere them on the back. Emboss a 4 3/4" x 6 3/4" white cardstock using Spellbinders Bricks Embossing Folder. Adhere the ornaments on this piece using foam dots and adhere the twines on the back as shown. Adhere this piece on the card base using foam tape. 

Die cut the wreath and leaves from the same paper collection using the dies from Seasonal Wreath Die. Curl the leaves using the back of paint brush or any similar object. Adhere them on the card base as shown using foam dots. 

Die cut the bow from Festive Poinsettia Paper Collection and Luxe Gold Cardstock using the dies from Seasonal Werath Die. Adhere them on the wreath as shown using foam dots. Adhere few red pearls on the wreate to mimic berries.

Other Products: Versamark Ink, watercolors, red pearls, Spellbinders Bricks and Bark Embossing Folder and Gold twine and tacky tape.

Instructions:

Create a 5 x 7” Gateway card blank using the outer gateway Teardrop Lattice Gateway Die. Cut white cardstock 10 x 7 1/4”. Lay in scor-pal landscape and score down the centre. Burnish the crease and tape down the die with the side blade overhanging the crease and run through the die-cutting machine to create the card blank.

Die-cut the outer gateway to create the mat with Seasonal Wreath Paper Collection 5A, edged in Library Green and adhere to the front of the card.

Die-cut Teardrop Lattice Gateway outer, outer decorative and inner gateway with Seasonal Wreath Paper Collection 6B over solid 2B edged in Library Green, add Nuvo Gloss White drops and allow to dry naturally.

Add double sided tape at the top reverse side of the gateway and secure ribbon (approx 5 1/2” length). Add double dots to the frame and mount onto the card front.

Die-cut Seasonal Wreath bow in matching papers, edge in Library Green and add white trim over, adhere to the top of the ribbon with double sided tape.

Die-cut a solid Seasonal Wreath in white cardstock and matching paper edged in Library Green and adhere together, edged in Library Green. Die-cut Seasonal Wreath with aperture in white cardstock and matching paper, edged in Library Green and adhere together.

Position the aperture Seasonal Wreath over the white solid wreath and stamp through the aperture ‘For my friend’ Just for You Sentiments in Library Green.

Sandwich the ribbon between the two solid wreath layers, cutting off any excess and adhere aperture wreath over using dots.

Mat and layer Seasonal Wreath Paper Collection 6B 5 x 2 3/4” Eyelet Frame Gateway Die onto 2B 6 3/4 x 4 3/4” edged in Library Green. Die-cut Eyelet Frame Gateway 4 3/4 x 2 1/2” in white cardstock, stamp Elegant Gateway Sentiments and edge in Library Green. Colour with Zig Clean Colour Real Brush Markers and watercolor brush, add with dots.

Stamp onto white cardstock in versafine onyx and clear heat emboss Summer Wreath Accents, colour with Zig Clean Colour Real Brush Markers and watercolor brush. Die-cut and shape with Deluxe Flower Shaping Kit. Adhere onto the wreath with hot glue and dots.

Other Products: Hot glue, paper trimmer/scissors, double sided tape, ribbon, versafine onyx, clear embossing powder

Instructions:

Card size 5”x7”. Take pattern paper from the Seasonal Wreath Collection HCDP1-2132, tear the edges and adhere it on the card base using Designer Dries Clear Adhesive.

Cut Elegant Hearts Centerpiece Die HCD1-7369 on white cardstock and cut on pattern paper also, adhere it at the back as shown. Assemble them and adhere them using foam tape.

Cut one banner die from Arrow and Banner Die HCD1-7204 on white cardstock, add sentiment from Cheerful Note Sentiments Cling Stamp Set HCPC-3848 using archival ink-leaf green, adhere it using foam tape.

Cut one die from Seasonal Wreath Die HCD1-7375 on Gold cardstock and adhere it using Designer Dries Clear adhesive, as shown.

Stamp images from Summer Wreath Accents Cling Stamp Set HCPC-3965 on white cardstock using archival ink-plum, cut them coordinating die Summer Wreath Accents Die HCD1-7372 and color them using archival ink-vibrant fuchsia, leaf green, pink peony, viridian. Stamp a few leaves on vellum using white ink and sprinkle white embossing powder, heat it and cut  with coordinating die. Stamp same leaf using versamark ink and sprinkle gold embossing powder, heat it and cut them with coordinating die. Again stamp these leaves using distress ink-peeled paint and aged mahogany and stamp on white cardstock, spray some water, let it dry, and again stamp on it using archival ink-library green, cut them with coordinating die.

Now assemble them as pictured.

Other Products: White cardstock, Big-Shot Machine, Distress Ink-Peeled Paint, Aged Mahogany.

Instructions:

The finished card measure 6 x 6 inches. Cut one piece of white cardstock in deluxe flower shaping paper 12 by 12 inches and score at 6 inches to make a side fold card. Cut a 5 5/8 x 5 5/8 inches green Seasonal Wreath paper #5B and glue it on the card base. Glue a green paper #5A  5 x 5 inch on a white 5 1/4  x 5 1/4  inch paper and glue it with 3D foam on the card base. Make white droplets with the irresistible texture spray ink. Let it dry.

Use the Rounded Window frame die and cut a doily in white (cut the center with the circle basics large die). Glue this in the center of your card with 3D foam. Cut with the appropriate die a wreath and cover it with green leaves from the Winter Wreath Accents stamps (stamp in library green).  Stamp in leaf green, leaves from the summer wreath accents and cut with the appropriate die. Stamp in Carnation Red berries from the Winter wreath accents and cut with the coordinating die.  Put 3D crystal clear on it.  Let it dry and then glue it on the wreath. Make white droplets with the irresistible texture spray ink. Let it dry.

Stamp snowflakes with white Versacolor ink onto white paper and emboss with white powder. Diecut with the coordinating die. Glue 3 of them on your wreath.

Die cut the word “NOEL” with the Letters and Numbers Die 3 times in the white cardstock, color with a red zig marker and glue them on each other to make like chipboard letters. Glue this title at the left and right of your card. Add 3D crystal clear on it and let it dry. 

For the final touch, simply add a ribbon with sleigh bells on the bottom of the wreath.

Other Products: Die cutting machine Cut’n’boss, heatgun, hot glue gun, hot glue, scissors, ribbon, sleigh bell, Irresistible texture spray

Instructions:

The green framed patterned paper is the background. Cut the plaid patterned paper to 8 x 8", and the dark green patterned paper to 8.5 x 8.5". Adhere these layers together. Mat both photos in white cardstock and adhere to the layout using foam tape. Find and die cut out the 2 mini tags. Add above the matted photos and add burlap string bows to both.

Stamp and die cut out 2 sets of each of the following onto white cardstock using dark brown ink (Staz On- Timber Brown): pine cones, holly leaves, berry twigs, large winter berry sprigs. Add color to the holly leaves using green ink (Stampin Up- Old Olive) and daubers. Add color to the other images using Zig Clean Color Markers and a waterbrush. Pine Cone- Brown, Berry Twig- Brown and Carmine Red, Winter Berries- Olive Green, Carmine Red, Brown, Mustard.

Stamp and die cut 2 sets of each the small and medium Christmas Poinsettia images onto Deluxe Flower Shaping Paper using dark brown ink. Add color to the images using red ink (Stampin Up- Riding Hood Red) and daubers. Shape the flowers using the coordinating 3D shaping mold. Assemble the flowers and then add brown Prills to the middle of each with a liquid adhesive. Let dry.

Die cut out the wreath image both layers from white cardstock. Die cut out the top layer from light green patterned paper, the under layer from Luxe Gold Cardstock and the bottom layer from dark green patterned paper. Adhere the top 2 layers together, and add to the bottom layer using foam squares. Adhere the wreath layers together using foam squares. Add the bow to the bottom of the wreath and adhere to the bottom left hand corner of the layout. Add dark pearls to the wreath.

Adhere the poinsettias around the matted photos first. Then start adding the other bits to the clusters. Find and cut out the “hello” and “smile” from the Seasonal Wreath Paper Collection, flag one end of each and mat on white cardstock. Add these to 2 of the clusters.

Other Products: Brown Pearls, Cardstock- White, Water brush, Stampin Up Ink (Old Olive, Riding Hood Red), Burlap String, Scrapbook Adhesives by 3L (Crafty Foam Tape, 3D Foam Squares, E-Z Runner Ultra, Adhesive Dots Small, Dual Tip Glue Pen)

Instructions:

To make the card base and front. Take the white cardstock, the Simple Centerpiece Die set and die cut the card base. Use the outer and the third in die sizes for this. Do the same for the mating using the design paper sheet 12B from the Seasonal Wreath collection paper pad. Using the paper trimmer, cut a little away from each edge of the hexagons from the design paper so they will be a little smaller than the bases. Adhere to the white card bases using the foam 3D tape or dots then both bases together using the double sided tape to form the card front. Die cut another large sized hexagon from the white card stock then score a 1 / 2 “ line across one of the edges. Apply double sided tape to this then adhere to the card front to form a tent fold card.

Using the white card stock and the Seasonal Wreath die set die cut the Wreath base, the bow and twice the holly leaves. Taking the Winter and Autumn seasonal Accents stamp sets and the library green ink, stamp onto the white card stock all the elements needed for this card, colour the stamped elements using the colours listed below then die cut using the matching die sets.

Using the white card stock die cut the bow from the Seasonal Wreath die set. Give color to the bow out line and the backing. Leaf green and Sunflower inks and the aid of the daubers. Adhere together. Stamp, color and die cut the rest of the elements used for this card.

Apply a little diamond stickles to the apple granites, leaves and flowers. To finish, apply the crystal lacquer to the bow and berries.

Coloring list: Archival inks:-Seasonal Wreath background- Library green, Sunflower and Red Geranium. Seasonal Wreath background Holly- Library green and Olive. Bow- Library green and Sunflower. Wheat- Sunflower. Berry twigs- Red Geranium. Granite Apples- Red Geranium and Leaf Green. Sentiment: Sepia.

Bring shape to the elements by using the flower shaping tool kit. Adhere in place in layers using the wreath base as a guide the holly leaves then arrange and adhere the rest of the elements as seen in the project photo. Last adhere the bow in place. Using the hot glue gun and clear drying adhesive to do this. Make the sentiment banner by stamping the sentiment onto the white cardstock then trim both ends. Curl the banner a little so you have a curve in the middle. Adhere both ends to the card base under the wreath. Apply a little diamond stickles as seen to the apple granites, leaves and flowers then apply the crystal lacquer to the berries and the bow.

Other Products: Paper trimmer, Hot glue gun, Double sided tape, Double sided 3D foam tape., Diamond stickles.

Instructions:

To make the card base and front, take the white cardstock, the Simple Centerpiece Die set, die cut the card base. Use the outer and the third in die sizes for this. Do the same for the matting using the design paper sheet 12B from the Seasonal Wreath collection paper pad. Using the paper trimmer, cut a little away from each edge of the octagons from the design paper so they will be a little smaller than the bases. Adhere to the white card bases using the foam 3D tape or dots then both bases together using the double sided tape to form the card front. Die cut another large sized octagon from the white card stock, then score a 1/2" line across on one of the edges. Apply double sided tape to this then adhere to the card front to form a tent fold card.

Using the white card stock die cut the bow from the Seasonal Wreath die set. Using the Iron Sentiment die set, die cut from the white card stock 5 layers of the Thank You sentiment. Die cut also one more from the design paper sheet 12B. Taking the Autumn Seasonal Accents stamp set and the library green ink, stamp onto the white card stock all the elements needed for this card, once for the owls. Six of the sunflowers. Five of the leaf sets. Colour the images using the colours listed below then die cut using the matching die sets.

Coloring list: Archival inks: Stamping for the images- Library Green. Bow- Leaf Green and Sunflower. Aqua pencils:- Leaves-Oregano, Sunflowers-Bison, Mango, Orange. Owls-Bison.

Bring shape to the elements by using the flower shaping tool kit. Adhere in place across the card front as shown, using the hot glue gun and clear drying adhesive to do this. To finish the card, apply a little diamond stickles to the leaves and flower centres, apply also the crystal lacquer to the bow and owl eyes.

Other Products: Paper Trimmer, Hot glue gun, Double sided tape, Double sided 3D foam tape. Inks :Spectrum Noir Aqua pencils:-Oregano, Bison, Mango, Orange, Bison.

Instructions:

Make a white card base using the HCCB1-481 6 x 6" Round Bi-Fold Card, cut one of the panels off leaving just two.

Using the Rounded Sunlight Window Die, cut the largest die with the Seasonal Wreath Paper Sheet 8B, adhere to the front of the card base.

Using the Elegant Hearts Centerpiece die, cut the main part and the center part out of white card stock. Glitter both and set aside to dry.

Use the Seasonal Wreath die and cut it out with a piece of the Seaonal Wreath paper sheet 11B. Use Sheet 10A and stamp 4 of the leaves with Library Green ink. Cut out with the coordinating die, arrange on the yellow wreath. Put foam dots on the back. Adhere everything on the card base.

Stamp the flowers, birds, butterfly and bees on white card stock with black ink, use the Zig Markers and color. Cut out with the coordinating die and arrange on the wreath.

Stamp the sentiment on white card stock and cut out using the small oval die, adhere to the card as shown. Add the bird, nest and butterfly around it.

To finish, add pearls to the center of each flower.

Other Products: Die cut machine, Paper trimmer, Pearls,

Instructions:

Cut out a green panel with the biggest die from the Teardrop Lattice Gateway Die and the Seasonal Wreath Paper Collection. Fold white cardstock to 4.5 x 12" with fold on the top, then use the First Outline Frame from the Eyelet Frame Gateway Die to cut out a base, adhere it to the back of the green panel. Use the First Eyelet Frame, cut out a white frame. Use the First Eyelet Frame and Second Eyelet Frame and cut out gold frame. Cut out a white gate with the Palace Gateway die. Adhere all elements together as pictured.

Cut out a green wreath with the Seasonal Wreath Die. Stamp 5 blossoms from Small Wild Rose Cling Stamp Set in Red Geranium ink onto Deluxe Flower Shaping paper, color them with the same ink, diecut with coordinating dies and shape with the shaping tool. Thread the stamens through the centers of flowers and attach with hot glue, trimming off the excess wire. Stamp 10 lilacs in Buttercup ink and cut out with coordinating die, shape them with the shaping tool. Add some Stop Wining! Prills to their centers. Stamp lots of holly leaves from the Winter Wreath Accents Cling Stamp Set in Leaf Green ink, color them, cut out with coordinating die and shape with the shaping tool. Stamp Christmas balls and bells from the same Cling Stamp Set in Tuxedo Black ink. Color them with promarkers and cut out with coordinating dies. Cut out 3 snowflakes from the Seasonal Wreath Die set and Luxe Gold Cardstock. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

Add some beads. To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers, Christmas balls and bells.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, promarkers, white cardstock, sisal, red beads

Instructions:

Prepare a 4.25" x 6" white cardstock base when folded. Cut a 4" x 5.75" rectangle from the white cardstock. Using the Scor-Pal board, score the decorative line along each edge. Glue to the base.

Using the HCD1-7375 Seasonal Wreath Die kit, cut the outer frame of the garland from the lighter green 9B Seasonal Wreath Paper Collection and the inner part from the dark 6B sheet of the same collection. Join them together using glue.

Cut the bow from the set from the red 2B Festive Poinsettia Paper Collection and the light yellow 11B Seasonal Wreath Paper Collection. Connect with each other with glue.
Stamp selected elements from the HCPC-3967 Winter Wreath Accents Cling Stamp Set on a white cardboard box. Use black ink - Jet Black. Cut with matching HCD1-7374 Winter Wreath Accents Dies. Paint with watercolor paints green and red. Place the selected items on the top above the bow as shown. Attach the bow with round foam dots.

At the bottom, stamp the sentiment from the HCPC-3960 Holiday Village Cling Stamp Set using Black Cherry ink. And it's ready.

Other Products: watercolor paints, brush, cutting machine, paper trimmer

Instructions:

From white paper, cut the base from the largest die from the Simple Centerpiece Die set. From the same die set, cut a smaller frame from the paper collection and glue it to the base. From silver paper, cut the largest frame from the Elegant Hearts Centerpiece

From white paper, cut out the base for the wreath and the base for the bow. Smudge the base of the bow with red ink, then cut a ribbon out of the silver paper. Cut with matching dies. Cut a garland from the paper collection. Glue it as shown in the photo.

Stamp the small elements from the Autum Wreath Accents and Winter Wreath Accents sets with black ink on white paper. Smudge yellow, red, green, brown ink. Shape it up with the Deluxe Flower Shaping Kit.

Arrange everything as shown. Cover with glue and glitter.

Other Products: Die cutting machine

Instructions:

Card size is 5 x 7”. Cut two pieces of white cardstock 5 1/2 x 7 1/2”. Add one-inch double sided tape to the top of one, then diecut both using the outside Lattice Flourish Die. Score the one with the tape just underneath the tape and then adhere together to create card base. Cut the green and white plaid paper, sheet 5B, from the Seasonal Wreath Paper Collection using the same die and adhere to the card front. Diecut sheet 6B trim the top to fit and adhere to the inside of the card. Cut the decorative Lattice Flourish dies (except for the Happy Birthday) from both white and Luxe Silver cardstocks and adhere together slightly offset. Dry emboss the white center. Adhere these diecuts to the card front using dries clear adhesive and foam strips.

Diecut the Seasonal Wreath from Luxe Silver cardstock. Diecut the inside holly wreath from green pearlescent metallic cardstock and adhere to the silver wreath. Stamp the holly leaves and the berries from the Winter Wreath Accents Cling Stamp Set on red and green pearlescent metallic cardstock and stamp the feathery leaves on Luxe Silver cardstock using VersaMark ink, cover with WOW Silver Metallic Embossing Glitter and heat set using the Heat It Tool. Diecut using the coordinating dies, shape all using the Deluxe Flower Shaping Kit and adhere to the wreath using hot glue.

Diecut the bow from Luxe Silver and red pearlescent metallic cardstocks and adhere as shown.

Stamp ‘Merry Christmas’ from Festive Winterscapes Cling Stamp set on white cardstock using VersaMark, cover with WOW Primary Apple Red Embossing Powder, heat set using the heat It Tool and diecut using the Ticket and Tags Die. Diecut again from Luxe Silver cardstock, adhere together slightly offset, lightly shape and adhere to the card front using hot glue.  

Other Products: White cardstock, Red and Green Pearlescent Metallic Cardstock, VersaMark, WOW Silver Metallic Embossing Glitter, WOW Primary Red Embossing Powder. Misti, Die Cutting Machine, Double Sided Tape, Holly Embossing Folder (Retired)

Instructions:

Card size: 5 1/2 x 5 1/2". Fold ivory cardstock to 5 3/4 x 5 3/4" then place largest Octagon die on it with cutting edge off of the fold, barely, it will still cut a full octagon if straight cutting edge is just outside of fold.

Cut another large octagon from gold color cardstock and cover front matching edges. Cut one from Rust cardstock with the next size down octagon also to make an octagon frame for front of card, cut and glue to card front. Cut a large octagon from light gold color decorative paper for the inside of card then glue in place. Cut a smaller octagon frame (4 1/2") from light gold color cardstock then pop it up placing octagon with point down, this frame will be perfect for the fall wreath.

Cut the Seasonal Wreath outline die from rust cardstock then pop it up in the center of light gold octagon frame. Stamp all the fall décor or the pieces you want on the wreath (some will need to be stamped 3 or 4 times and stamp the smallest Rustic Sunflowers using Tuxedo Black, die cut then color all with Copic Markers.

Glaze the grapes and some of the leaves with 3D Lacquer. Glitter the flowers and pumpkins. Glue wreath pieces down on wreath base and pop some of the pieces up. Pop pumpkins at the bottom with owl trio on top of them. Add Redland Elements to the sunflowers.

Die cut the bow using Seasonal Wreath Die set from dark purple and from purple. Use the dark purple for the outline part of bow. Glue it to the top of wreath.

Cut out one of the sentiments and mat it with medium gold color cardstock, fishtail the ends and curve it around a fat pen (Copic Marker used here). Glue it to the center of wreath. Glitter the card.

Other Products: Rust cardstock, gold color cardstock, light gold color cardstock, purple cardstock, dark purple cardstock, Copic Markers:Y38, YR04, YR18, Y11, Y15, Y19, V01, V12, V15, V17, Y21, YR24, YR27, E51, C2, C3, YG91, YG93

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 10” x 7”, score at 5” along the long side and fold to create a base card of 5” x 7”.  Cut a piece of gold cardstock 5” x 7” and adhere to the front of the card. Cut a piece of light pattern paper 4 7/8” x 6 7/8” and adhere to the front of the gold cardstock.

Die cut three lattice frame dies using the Nos. 1, 2, 3 and 4 dies from the HCD2-7338 Lattice Flourish Gateway Die set – two out of Deluxe Flower Shaping Paper and one out of gold cardstock. Trim the bottom lattice dies from the white die cuts and then adhere together. Adhere the gold die cut to the white die cuts and then adhere to the front of the card. Adhere the gold bottom lattice to the centre of the frame as shown.

Stamp the grape and grape vine leaves from the HCPC-3966 Autumn Wreath Accents Cling Stamp Set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Real Brush Markers and colour pencils and die cut with the coordinating dies. Adhere the leaves and grapes on the top of the frame as shown using foam squares to create some dimension on some of the images. Die cut the bow out of gold cardstock – one outline, three inner dies using the No. 2 and No. 3 dies from the HCD1-7375 Seasonal Wreath Die. Adhere one inner bow to the outer frame and then add three layers of the inserts. Adhere the bow to the top of the frame above the leaves and grapes as shown.

Stamp the leaves, acorns, sunflower and owl images from the HCPC-3966 Autumn Wreath Accents Cling Stamp Set in Jet Black ink on Iris cardstock. Colour the images with Zig Clean Colour Real Brush Markers and coloured pencils and then die cut with the coordinating dies. Adhere the leaves, acorns, sunflowers and owl around the bottom left of the card as shown using foam squares on some images to create dimension.

Stamp the sunflower images from the HCPC-3962 Rustic Sunflower Cling Stamp Set in Tiger Lily ink on Deluxe Flower Shaping Paper. Colour the petals with Buttercup ink and the centres with Tiger Lily ink and die cut with the coordinating dies. Colour the backs of the flowers with Buttercup ink and shape using the coordinating mold. Add Crystal Clear glitter to the petals with clear gloss gel medium and gold Gala Glitz to the centre of the flowers.  Adhere to the bottom left over the coloured images as shown.

Stamp the butterfly and bee image from the HCPC-3965 Summer Wreath Accents Cling Stamp Set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Real Brush Markers and colour pencils and then die cut with the coordinating dies. Add a butterfly and bee to the sunflowers and a butterfly on the top right of the card on the leaves as shown. 

Cut a sentiment out from the pattern paper and adhere to the front of the bottom lattice as shown.

To finish, add Crystal Clear glitter to the painted images with clear gloss gel medium.

Other Products: Iris cardstock, Prismacolour pencils, clear gloss gel medium, foam squares

Instructions:

Using the Seasonal Wreath Die, tape down the shadow die and the small inside center die and cut out two blue cardstock pieces. Glue those together. Decide on placement for the magnet and glue it down. Then using the shadow die cut out a piece of Sheet 11B of the paper collection and glue that behind the blue wreath. This covers the magnet and also adds a pretty center to the wreath.

Stamp the Seasonal Wreath Accent pieces onto a piece of white cardstock. Color the leaves with Fern Green ink and most of the flowers were stamped with Rich Cocoa. Using the Stack and Store Daubers color the elements. I used Leaf Green and Olive to color the greenery. I used Rosebud to color the butterfly, the hearts and the birds belly and some of the flowers. This is where I used the Dove Blender Kit. I used Dandelion ink to color the flower head and the bumble bee and some of the filler pieces. I put Lettuce Entertain You Prills into the yellow flower head. The sunflowers are stamped in Dandelion and colored with Sunflower, Canteloupe, Dandelion and Rhubarb Stalk inks.

Cut everything out using the coordinating dies. Lay the sunflower leaves onto the shaping mold, spritz with water and run through the die cut machine. Turn out onto desk to dry. When dry, glue two petals together and add the flower center material. Allow to dry and when dry, add glitter.The little birds and the nest are colored using Rich Cocoa, Desert Sand for the nest and Danube Blue, Rosebud and Desert Sand for the little birds. Glue the birds onto the nest and glue into place on the wreath. I used dimensional tape to adhere the hearts and the bumble bee into place. Decide on placement of everything else and glue down. The project is finished.

Other Products: Blue Cardstock, Die Cut Machine, Hot Glue Gun, Dandelion Memento ink, Homemade Center for Sunflowers, Dimensional Tape

Instructions:

Side fold card measures 5 inches by 7 inches. To create a card base - cut out a 10” x 7” piece of HCPP1-438-2 Paper Pack of 10 - White and score it at 5” (long side up). Fold using a bone folder along the score lines. Cut out a 4 7/8” x 6 7/8” piece of HCGP1-488 Luxe Gold Card and adhere it to the card front. Cut out a 4 5/8” x 6 5/8” piece of HCPP1-438-2 Paper Pack of 10 - White, then distress the edges with Memento Dye Ink Pad - Paris Dusk using HCDA1-449 Daubers and adhere final piece to the card front.

Cut out a 4 3/8” x 6 3/8” piece of HCPP1-438-2 Paper Pack of 10 - White, then distress the edges with Memento Dye Ink Pad - Rose Bud using HCDA1-449 Daubers. Using Memento Dye Ink Pads - Paris Dusk and Rose Bud stamp the snowflakes from HCPC-3967 Winter Wreath Accents Cling Stamp Set on previously distressed 4 3/8” x 6 3/8” piece, then adhere the final piece to the card front as shown.

Stamp and colour the branches from HCPC-3967 Winter Wreath Accents Cling Stamp Set on HCPP1-468 Deluxe Flower Shaping Paper with Memento Dye Ink Pad - Olive Grove, then shape them using HCST1-401 Deluxe Flower Shaping Kit and adhere them to the card front as shown.

Stamp and colour Christmas ornaments from HCPC-3967 Winter Wreath Accents Cling Stamp Set on HCPP1-468 Deluxe Flower Shaping Paper with Memento Dye Ink Pad - Paris Dusk, then shape them using HCST1-401 Deluxe Flower Shaping Kit and adhere them to the card with silver thread using 3D foam.

Stamp and colour the rest of the elements of HCPC-3967 Winter Wreath Accents Cling Stamp Set on HCPP1-468 Deluxe Flower Shaping Paper with Memento Dye Ink Pad - Olive Grove and add pink accents with Memento Dye Ink Pad - Rose Bud using HCDA1-449 Daubers, then shape them using HCST1-401 Deluxe Flower Shaping Kit and adhere them to the card using hot glue.

Stamp the poinsettia flowers from HCPC-3881 Christmas Poinsettia & Holly Cling Stamp Set on HCPP1-468 Deluxe Flower Shaping Paper with Ranger Archival Ink Pad - Cobalt, then colour them with memento DYe Ink Pads: Grape Jelly, Rose bud and Paris Dusk using HCDA1-449 Daubers and die cut them with matching HCD1-7249 Christmas Poinsettia & Holly Die. Place flower petals and leaves in HCFB1-478 3D Christmas Poinsettia Shaping Mold, spray them with water and run them through a die cutting machine. Assemble Poinsettia flowers using a hot glue gun, HCST1-401 Deluxe Flower Shaping Kit and Silver Pearls, then adhere the flowers to the card front as shown.

Using a sponge add Designer Dries Clear Adhesive to the leaves, lowers, Christmas ornaments and to the selected areas on the card front, then sprinkle them with Glitter.

Other Products: Die Cutting machine, Trimmer or Guillotine, Scissors, Hot glue Gun, Bone folder, Silver Pearls, Silver thread, Ranger Archival Ink Pad - Cobalt, Memento Dye Ink Pad - Grape Jelly

Instructions:

For the card base take 6 inches by 18 inches white cardstock fold it in half on the long side. Cut paper from sheet number 4A using Seasonal Wreath Paper Collection and adhere on to the card front panel using clear glue, Die cut front panel lower edge by using Shadow die of Decorative Circle Frame Die.

Die cut Decorative Circle frame 2x on Deluxe Card adhere both frame together for the sturdiness cut this frame from half and place on the card as shown using foam dots.

Die Cut Ornate Ovals Die on Deluxe Paper and sheet number 11B from Seasonal Wreath Paper Collection and adhere both together, add this frame on the front of the card using foam dots.

Stamp the sentiment on Deluxe Paper using Versamark Embossing Ink from Ornate Just For You Cling Stamp Set cover with Golden Embossing Powder heat it using heat gun, Diecut using coordinating die. Cut shadow die of this sentiment die and adhere both together using clear glue, add this sentiment on the right edge of the card using foam dots and cover the empty space.

For the wreath accents and flowers, stamp all images using Versamark embossing ink from Summer Wreath Accents Cling Stamp set, Winter Wreath Accents Cling Stamp set, Autumn Wreath Accents Cling Stamp set and Clematis Cling Stamp set on Vellum paper, cover with white embossing ink, heat it with heating tool and die cut using coordinating die. Color the wreath accents with pink peony ink and leafy green ink from the back side using daubers, color the flowers using Tiger Lily Archival Ink from the back side using daubers, shape the flowers using shaping kit and make a few flowers. Add clear glue in the center of the flowers and sprinkle mini prills, cover all elements with clear glue using hydra sponge and sprinkle some Nida Tanweer Magic Glitter.

Arrange all ready elements as shown using hot glue gun.

Embellish with rhinestones and pearls.

Other Products: White Cardstock, Rhinestones, Pearls, Nida Tanweer Magic Glitter Powder, Hot Glue Gun, Vellum Paper, White Embossing Powder, Versamark Embossing Ink, Heat Gun, Golden Embossing Powder.