Instructions:

Cut white cardstock to 10 x 6 3/4", score and fold at 5" to create card base. Cut a light pink piece of paper (sheet 11B) from the HCDP1-2134 Moments in Time Paper Collection to 5 x 6 3/4" size. Layer this pink panel on top of the card base. Cut a piece of white cardstock to 4 3/4 x 6 1/2" size. Stamp off ‘Time we Share’ sentiment from HCPC-3973 Timepiece Sentiments Cling Stamp Set in Magenta Hue ink onto a scrap paper and then onto white panel to create a soft background. Repeat this step 3 more times, creating a diagonal pattern. Layer this panel onto card base and set aside.

Stamp off the second smallest set of peony petals from HCPC-3819 Small Sweet Peony Cling Stamp Set in Lighthouse ink onto scrap paper and then onto Deluxe Flower Shaping cardstock for a soft look. Repeat the step, using the smallest set of peony petals in Leaf Green ink. Stamp the leafy spray from HCPC-3835 Leafy Accents Cling Stamp Set in Leaf Green ink onto the same cardstock. Stamp the elegant clock from HCPC-3971 Elegant Moments Timepiece Cling Stamp Set in Lighthouse ink onto more of the same cardstock. Stamp the same clock in Metallic Gold pigment ink onto Luxe Gold cardstock and heat emboss with Gold embossing powder. Diecut another clock from white cardstock. Diecut all the images with their coordinating dies. Use the clock circle die to diecut a floral background from small card panel in the paper collection (sheet 2A). Stamp the ‘Time we Share’ sentiment in Magenta Hue onto cardstock and cut with trimmer and scissors.

Use the daubers along with the following inks to color the images. Use the Magenta Hue, Cactus Flower, and Lighthouse ink on the outer edges of clock, clock circle and clock hands. Use a light touch of Leaf Green ink on the inner edges of the before mentioned images. Add a light touch of Leaf Green on the floral paper circle. Ink the inner edges of clock and clock circle with Metallic Gold ink and heat emboss with Gold embossing powder. Use the Magenta Hue, Cactus Flower, and Lighthouse ink on the outer edges of second smallest peony petals. Use the Leaf Green in the centers. Use the Leaf Green in centers of the smallest peony petals. Ink the inner edges of peony petals with Metallic Gold ink and heat emboss with Gold embossing powder. Use the Leaf Green ink on the leafy spray. Apply a thin layer of Crystal Lacquer of over peony petals and let dry. Do the same for clock, clock circle and hands.

Use the shaping stylus from Deluxe Flower Shaping kit to shape pink clock and use dimensional adhesive to layer the pink clock onto the gold one. Use dimensional adhesive to layer onto white clock. Layer the floral paper circle directly onto white opening of clock. Use dimensional adhesive to layer timepiece circle on top and then attach clock hands. Temporarily place this onto card base and use it as a guide for placing some background color using a dauber and Magenta Hue ink as shown. Add some Mustard glitter using the Dries Clear Glue and Hydra sponge. Add a section of cheesecloth to show on the top left and bottom right of card. Add a touch of Magenta Hue to cheesecloth. Attach clock onto card as shown. Use Nuvo Bright Gold drops to accent gold clock design.

Use the Basic Shaping mold to shape the peonies. Use the Leafy Accents Shaping Mold to shape the leafy spray. Pierce the peony petal centers and thread gold stamen through, attaching with hot glue on the backside. Cut apart leafy spray. Use hot glue to attach leafy spray and florals onto top left and bottom right of card as shown. Attach sentiment as shown and add finishing touches of the Mustard glitter using the Dries Clear glue.

Other Products: Art Institute Mustard Ultrafine Glitter, Nuvo Bright Gold Drops, White Cheesecloth, Dimensional Adhesive, Hot Glue, Hot Glue Gun, Funnel Tray, Scissors, Paper Trimmer, Diecutting Machine

Instructions:

To build the front shaker window of the booklet, stamp one main image of Simple Moments Stamp with black and cut open the center window as shown using its coordinating die set. Color the outer image and the center image separately using Zig Clean Clear Brush Markers. Glue the acetate sheet from behind. Cut 6-8 die-cuts without stamping and stack them together using glue. Glue the colored image and build the shaker window. To close the window, cut one solid die-cut and glue the center-colored image in the center. Fill shaker elements and close the window by gluing the solid die cut at the back.

Cut 6 solid die cuts using the Simple Moment die. Choose the pattern papers from the paper collection and adhere them to the front and the back panel. Cut three circle windows from white cardstock using Courtyard Elegance Die and chop them into half. Adhere them on each tag, keeping the top side open to slide sentiment tags.

Next, Stamp the sentiments from Timepiece Sentiments Cling Stamp Set with coffee Archival ink on white cardstock and cut them using its coordinating die set. Prepare the sentiment tag for each panel.

For the wild roses, stamp the flower petals using Vibrant Fuschia Archival ink and Small Wild Rose Stamp set and cut them using its coordinating dies. Ink the flowers using Vibrant Fuschia and Leaf green and shape them it’s coordinating mold. Once the shaping is done, further add little detailing with ball tools and assemble a few flowers using tools from the shaping kit and add prills to the flower centers.

For the leaves, stamp the leaves from the Leafy Accent Cling Stamp Set using Olive green Archival ink on Deluxe Flower Shaping Paper, paint them using Leaf Green and Olive Green, and cut them using its coordinating die set. Shape the leaves using Golf Groove Tools.

Stamp, color and cut few wisteria flowers using Leaf GreenFlower Archival ink and shape them using a flower shaping kit. Add flower pollens using a glossy accent and use these flowers as fillers.

Once, all the elements are ready, assemble the booklet as shown. Tie all the tags with satin thread, keeping the shaker tag on the front. Secure tiny tags on the ends of the satin thread and add pearls as an extra accent.

Other Products: Satin Thread, Shaker Elements, Acetate Sheet, White cardstock, Score Board, Diecutting Machine, Scissors, Glue, Glossy Accent, Thin wire.

Instructions:

The ready Z Fold card from white card stock measures 6″ by 7 1/2″. To prepare the card base, cut a smooth white cardstock measuring 12″ by 7 1/2″. Score the longer side first at 3″ and next at 6″. Crease and fold the card neatly. Choose the papers from the designer paper collection and chop the paper panels for all front and back panels. Make sure the panels are 1/16″ smaller so that it creates a delicate border all around the card base. The second Z - fold measures 4 1/2" by 11"., scored first at 5" and then at 8". Crease the panel and adhere to it as shown. Choose the pattern papers and cover all the panels like the previous one making a delicate border on all sides by 1/16".

To build the front shaker window of the card, stamp one main image of Elegant Moments Timepiece Stamp Set with black and cut open the center window as shown using its coordinating die set. Color the outer image and the center image separately using Zig Clean Clear Brush Markers. Glue the acetate sheet from behind. Cut 6-8 die-cuts without stamping and stack them together using glue. Glue the colored image and build the shaker window. To close the window, cut one solid die-cut and glue the center-colored image in the center. Fill shaker elements and close the window by gluing the solid die cut at the back.

Once the shaker is ready, layer it on the front panel as shown keeping a white die cut from the Elegant Pocket and Accent die set. To the inside panel, adhere a stamped sentiment from Timepiece Sentiment Stamp Set.  

For the wild roses, stamp the flower petals using Vibrant Fuschia Archival ink and Small Wild Rose Stamp set and cut them using its coordinating dies. Ink the flowers using Vibrant Fuschia and Leaf green and shape them it’s coordinating mold. Once the shaping is done, further add little detailing with ball tools and assemble a few flowers using tools from the shaping kit and add prills to the flower centers.

For the leaves, stamp the leaves from the Leafy Accent Cling Stamp Set using Olive green Archival ink on Deluxe Flower Shaping Paper, paint them using Leaf Green and Olive Green, and cut them using its coordinating die set. Shape the leaves using Golf Groove Tools.

Stamp, color and cut few wisteria flowers using Leaf GreenFlower Archival ink and shape them using a flower shaping kit. Add flower pollens using a glossy accent and use these flowers as fillers.

Once all elements are ready, assemble a small bouquet of flowers around the focal image without disturbing the opening of the panels. 

Other Products: Other Supplies Used: Satin Thread, Shaker Elements, Acetate Sheet, White cardstock, Score Board, Diecutting Machine, Scissors, Glue, Glossy Accent, Thin wire.

Instructions:

Other Products: White Cardstock, Hot Glue, Versamark

Instructions:

Other Products: White cardstock, Off white cardstock, Versamark, Satin Ribbon, Hot glue

Instructions:

With the cardstock Deluxe Flower Shaping pack of 50, cut out the opening clock base using the HCD1-7380 Simple Moments Timepiece Die. On the 4A Moments in Time Paper Collection sheet, Stamp the clock image from HCPC-3972 Simple Moments Timepiece Cling Stamp set 3x. Use Distress Ink Pad- gathered twigs. Stamp the first one near the edge of the upper right side of the designer paper. After cutting with the coordinating die, glue to the base. Stamp the second one in the center of the sheet and cut out only the largest circle from the clock set and the dial. Stamp the third one at the bottom edge on the right. Cut with another circle. Apply all layers on top and adhere. At the top, add the clock face.

Prepare Magnolia Flowers: Stamp Sweet Magnolia Blooms Cling Stamp Set HCPC-3948 on white cardstock using Vibrant Fuchsia color. Apply pink color with the dauber. Cut with matching dies. Shape in the 3D mold, then create the medium flowers with 3 and 4 petals and buds with 1 and 2 petals.

On a white cardstock,stamp 2x Clematis Cling Stamp Set petals HCPC-3954, use the Vibrant Fuchsia color, apply the pink color with the dauber. Cut with matching dies. Shape in a 3D mold, then create the flower as shown. Fold two petals together, place on the mat from the Deluxe Flower Shaping Kit HCST1-401, pierce with the Groove Golf Tool Set DMCT4185 through the center making a hole, thread the peach stamen from the Pastel Bead Stamens-Medium HCS1-457-3, apply glue on petals and a stamen to glue the whole thing together.

On the green cardstock,stamp the leaves from the Leafy Accents Cling Stamp Set HCPC-3835, use the Jet Black color. Cut with matching dies.

Create a flower arrangement as shown. Put the leaves on the bottom, add a little sisal, put flowers and buds. Create a decorative string, add a crystal in the center of the clock face as shown, and you're done.

Other Products: cutting machine, trimmer paper, green cardstock, Distress Ink Pad- gethered twigs, yellow crystal, sisal, string

Instructions:

Die cut a piece of 5" x 7" side folding white card base using the largest die from Fancy Classic rectangle frame die so that the fold line is just inside the cutting edge. Die cut a piece of white cardstock and a piece of pattern paper from Moments in Time Paper Collection using the same die. Adhere them on the card base. Die cut another piece of white cardstock using the die from the same die set and adhere it on the card front.

Stamp the clock image from Elegant Moments Timepiece Cling stamp set and the clock hands image from Simple Moments Timepiece Cling stamp set on pattern paper from the same collection using Plum and Library Green Archival inks. Die cut them using the matching dies from Elegant Moments Timepiece die and Simple Moments Timepiece die. Die cut 1 set of white cardstock using the same dies and adhere them behind the matching pieces. Ink the stamped images with Olive Archival ink and oval makeup brush. Color some parts using maroon watercolor. Adhere them on the card front using double sided foam tape.

Stamp the flowers and leaves from Small Wild Rose Cling Stamp Set, Fragrent Hyacinth Cling Stamp set and Leafy Accents Cling Stamp set on a piece of Deluxe Flower Shaping Paper using Plum, Magenta Hue and Leaf Green Archival Inks respectively. Die cut them using matching dies from Small Wild Rose Die, Fragrent Hyacinth  Die and Leafy Accents Die. Color the wild rose with Dusty Concord distress ink, hyacinth with Magenta Hue and the leaves with Vibrant Fuchsia and Leaf Green Archival Inks. Shape the flowers and leaves using Small 3D Wild Rose Shaping Mold, 3D Hyacinth Shaping Mold and 3D Leafy Accents Shaping Mold. Adhere Lettuce Entertain You Prills to the wild rose centers and White pearl stamens to smaller flowers. 

Arrange and adhere the flowers and leaves on the card front as shown. Add a few ladybugs made with Ebony Black and Red Berry Nuvo Crystal Drops, a few rhinestones to add finishing touch.

Other Products: Dusty Concord Distress ink, Red Berry Nuvo drops, Oval Makeup brush, Hot Glue gun, maroon DOMS Brush pen, Double sided foam tape and rhinestones.

Instructions:

This large easel card  measures  6 3/4“ x 8 1/2"  when completed. To make the easel card base: Start by taking the white card stock and cut three times 6 3/4“ x 8 1/2“  for the card base. Cut also a strip of 1“ x 6 3/4“ for the card hinge. Using the scor-pal, fold in half one of  the card bases along the  8 1/2“  edge.

Score and fold also the hinge strip to 1/2“ x 6 3/4“.  Adhere this hinge to the folded card stock and one of the 6 3/ 4“ x 8 1/2“ card stock at the 6 3/4“ edge to make the easel card folded base. Adhere the remaining card stock piece to the folded card, from the 6 3/4“ edge to the fold to be the card front base.

Taking the sheet 6B from the collection paper pad and cut two at 6 3/4“ x 8 1/2“  for the new card front and card base. Bring the Thistle colored ink onto the paper edges with the aid of a dauber. Adhere in place with the double sided tape or clear drying adhesive. This is your prepared card base.

From the same paper pad design sheet, cut a piece 5 3/4“ x 6 3/4“, ink the edges with the Thistle ink, this will be the matting to go on top of the lace frame later.

Taking the white card stock, prepare the back ground and the Intricate Swirl Frames die to make the lace frame back ground for the card.  Die cut the frame twice. Trim away one of the longer edges of the frame about 3/4“ on both frames. Add color to all the frame pieces using the Thistle ink. Adhere the frames to the card front by using the double sided 3D foam tape. You will have a gap in between the pieces at the middle of the card, adhere 3D foam tape to this gap then adhere the cut away pieces to the card to cover the gap, place these so they extend a little over the edges. Adhere now the matting layer already prepared, this will cover the remaining exposed gap.

Prepare the pocket needed for the card: Taking the white card stock and the pocket die from the Fancy-fold Pocket & Accents die set then die cut two pockets. Taking one of the pocket die cuts, trim away the side fold lines, the underneath fold lines, leaving alone the line just under the pocket, this will extend the depth of the pocket, cut the reast away. Using clear drying adhesive, adhere the two pockets together to reinforce the pocket front. Taking the Thistle ink to color the pocket, coloring  also the inside of the side folds so you will not see the white when adhered in place. Make the folds in the pocket (the first fold on the underneath of the pocket will not be used as this enables the pocket to be lengthened.) Apply double sided tape to the folded flaps ready to adhere to the card front. When adhering, apply also clear drying adhesive to strengthen, this is also so you can slide in place.

To make the lacey corners: Using the white card stock and the corners From the Swirly Boarder Accents die set, die cut a pair of corner bases and two pairs of the inner lacey corners X 3 ( 3 layers for each corner) Color the corner base and two pairs of lacey corners with the Thistle ink and a dauber. Adhere the lacey corners layers together, three each corner, thus four corners. Adhere two of these corners to the pair of corner bases. Adhere these two corners to the pocket corners. The remaining corner pair, adhere to the card fron as shown.

To make the clock tags: Taking the white card stock, sepia ink, the Elegant Moments Timepiece sets, the Simple Moments Timepiece sets, stamp and die cut both the clocks twice.

The Elegant Moments Timepiece: Taking one each of the Elegant and Simple Moments Timepiece clocks and the matching die to fit the clock face of the Simple Moments Timepiece clock, also the die with the circle and the clock face handles in it. Using these dies, die cut all. Using the matching die to cut the fancy frame around the clock face of the Simple Moments Timepiece clock. Bring color to the pieces: the clock base Leaf Green and Thistle ink with the aid of a dauber, the fancy frame with the Thistle ink and the clock face with the Leaf Green ink. Adhere together as shown using the double sided 3D foam tape or the 3D foam dots. Apply a little diamond stickles to enhance the elements in the clock. Die cut the clock base shape in a matching design paper from the paper pad and adhere this to the back of the clock. (as an alternative, you could always use the white card stock for this so you could use this to write a message or add a photo.) Make a triple bow from the ribbon and adhere in place. Adhere a flower to the knot of the bow, do this with the hot glue gun.

The Simple Moments Timepiece:- Taking the remaining Elegant and Simple Moments Timepiece clocks and the matching die to fit the clock face of the Elegant Moments Timepiece clocks, Die cut the circle. Die cut the clock handles from the circle with the matching die also die cut three extra from the white card stock, adhere all the layers together. Add color to all the clock pieces. Adhere the clock face in position on the clock base then the clock handles. Apply now the diamond stickles to highlight the elements in the clock. Adhere two leaves and three flowers to the right side of the clock bell. Taking the white card stock and the die that fits the swirly frame in the clock and die cut two circles. Ink the edges of these circles with the Leaf Green ink. Adhere to the back of both clocks, this is for the hand written message.

To make the leaves and flowers for this card: Using the sepia ink and the white card stock stamp and die cut with the matching die sets listed:  the Classic Rose, the Cottage Garden Hydrangea and the Leafy Accents. From the hydrangea petals, you will need 37 of mixed sizes, the roses you will need enough for 6 of the medium sized rose (each rose is made with 3 petal layers). The leafy accents, you will need five or six of the plain leafed vine and one of the leaf vines with the swirls in it.

Bring color to the images by using a dauber and the inks, Magenta Hue and French Ultramarine for the hydrangea petals, thistle ink for the roses and for the leaves, color with the sap green and the leaf green inks. Once the elements are colored, bring shape to the elements by using the matching 3D molds also using the flower shaping tool kit to do any extra shaping when needed. Add the blue stamens to the hydrangea petals and make the roses ready for use. You can watch the film for details on how to put these together.

For the sentiment, use the sepia ink to stamp on the white card stock and the Timepiece Sentiments set. Find the circle die that fits the sentiment from the Simple Moments Timepiece die set. From the same sets, stamp and die cut also the clock handles. The clock handles are adhered to the sentiment circle to the right of the sentiment.

First arrange then adhere with the hot glue gun the sentiment, the flowers and leaves to the card front and card base as shown. Making sure you have a card stop by using the flowers across the card base. Make a triple ribbon bow and adhere to the right side of the card base.

To finish the card off, apply a little stickles to the elements (this can be done as you go when making the card but then you need to put it aside to dry before going any further with the project which would make it longer to finish).

Other Products: Inks: Archival ink Sap Green, Thistle. Other: Double sided tape, 3D double sided foam tape , Diamond Stickles, Fussy cutting scissors, Misti stamping tool, Hot glue gun, Green organza ribbon.

Instructions:

Cut a piece of Deluxe Flower Shaping Paper10” x 7”, score at 5” along the long side and fold to create a base card 5” x 7”. Cut a piece of gold cardstock 5” x 7” and adhere to the front of the card. Cut a piece of dark pink pattern paper 4 7/8” x 6 7/8” and adhere to the front of the gold card.

Die cut two decorative edge frames using the No.2 die from the HCD2-7381 Fancy Classic Oval Frame Die set – one out of gold cardstock and one from Deluxe Flower Shaping Paper. Adhere the gold frame to the white frame and adhere to the front of the card.

Die cut two decorative dies using the No. 3 die from the HCD2-7381 Fancy Classic Oval Frame Die set – one out of gold cardstock and one from Deluxe Flower Shaping Paper.  Adhere the gold to the white die and adhere to the front of the card inside the outer frame.

Stamp the clock image from the HCPC-3971 Elegant Moments Timepiece Cling Stamp Set in embossing ink and heat emboss with gold embossing powder. Colour with Zig Clean Colour Real Colour Brush Markers and die cut one complete image, one inner image and one clock face. Adhere the inner image to the complete image and the clock face image to the front. Die cut a plain outer die using the No. 1 die from the HCPC-3971 Elegant Moments Timepiece Cling Stamp Set out of Deluxe Flower Shaping Paper.  Adhere the painted image to the plain image and adhere to the front of the card.  Stamp the image from the HCPC-3971 Elegant Moments Timepiece Cling Stamp Set in Stazon Jet Black ink on clear cardstock and die cut the clock face out.  Adhere to the painted clock face aligning the stamped numbers to the painted image.  Stamp the hands image from the HCPC-3971 Elegant Moments Timepiece Cling Stamp Set in embossing ink on Iris cardstock. Colour the image with Zig Clean Colour Real Brush Markers and die cut with the coordinating die. Adhere over the hand images on the clock face and finish with an iridescent gem.

Cut a sentiment strip from the paper collection and adhere to the left of the card as shown.

Stamp the leaf images from the HCPC-3931 Large Floral Urn Cling Stamp set in Fern Green on Deluxe Flower Shaping Paper.  Colour with Leaf Green ink and die cut with the coordinating die.  Colour the edges with Magenta Hue ink and the back of the leaves with Leaf Green ink. Shape using the Groove Golf Tool set and add Crystal Clear glitter using clear gloss gel medium and adhere around the right of the clock as shown.

Stamp the rose images from the HCPC-3752 Classic Rose Cling Stamp set in Plum ink. Colour the images with Magenta Hue ink and the centres with Plum ink and die cut with the coordinating dies. Colour the backs with Magenta Hue ink and the edges with Plum ink. Shape using groove golf tools and assemble in a variety of sizes using hot glue.  Add some Indian Gold Nuvo Mouse randomly to the roses and then add Crystal Clear glitter using clear gloss gel medium and over the leaves.

Stamp the leaf images from the HCPC-3752 Classic Rose Cling Stamp on Deluxe Flower Shaping Paper in Northern Pine ink. Colour with Leaf Green and Magenta Hue inks and die cut with the coordinating die. Colour the backs with Leaf Green ink and shape using the coordinating mold. Trim and adhere around the roses.

Stamp the small flower images from the HCPC-3752 Classic Rose Cling Stamp set in Lulu Lavender ink on Deluxe Flower Shaping Paper. Colour the centres of the flowers with Lulu Lavender ink and die cut with the coordinating die. Shape using the groove golf tool, pierce the centres and insert a light purple bead stamen and secure with hot glue. Add Ultrafine Crystal glitter using clear gloss gel medium. Trim the wires and insert as fillers around the roses as shown.

Inside Card: Cut a piece of gold cardstock 4 15/16” x 7” and adhere to the inside of the card.  Cut a piece of dark pink pattern paper 4 13/16” x 6 7/8” and adhere to the front of the gold cardstock. Die cut an eyelet circle using the No. 1 die from the HCPC-7156 Eyelet Oval & Basics Small Die and adhere the the inside of the card. Die cut an oval using the No. 2 die from the HCPC-7157 Eyelet Oval & Basics Large Die out of pattern paper. Stamp the sentiment from the HCPC-3848 Cheerful Note Sentiments Cling Stamp Set in Obsidian ink using a stamp positioner and then adhere to the centre of the eyelet oval.

Other Products: Iris cardstock, clear gloss gel medium, iridescent gem, heat gun, hot glue gun, stamp positioner, Hero Arts Embossing & Watermark ink

Instructions:

Prepare a white card base with a piece of card stock 5 x 7". Layer a piece of the Moments in Time paper (sheet 12B) on top 1/8" smaller on top. Die cut the largest die from the Eyelet Frame Gateways from white card stock, add foam dots to the back and center it on the front of the card.

Stamp 2 of the Elegant Moments Timepiece on white card stock with the Lilac Posies ink. Color the inside of the both timepieces with Desert Sand ink. On one of them dut the center out as shown and ink the edges with more of the Lilac Poises ink. Place foam dots on the back of both and adhere to the card.

Stamp one of the Timepiece sentiments on white with the Lilac Posies ink, ink the edges with more of the same ink. Color the inside with the Desert sand ink, add foam dots to the back and adhere to the center of the timepiece.

Stamp 3 of the Floral Shoppe Accents (leaves) on white with Cottage Ivy ink, color with New sprout, cut out using the coordinating die, ink around the edges with Bamboo Leaves, using the Deluxe Flower Shaping kit shape the leaves, adhere to the card.

Stamp 3 of the Clematis Flowers on white with the Lilac Posies ink, color the inside with Desert Sand, cut out with the coordinating die, place in the matching mold and run through the die cut machine to shape. Adhere to the card on top of the leaves.

To finish the card, add Gold glitter around the Timepieces, clear glitter on the leaves and flowers, and micro beads in the center of each flower.

Other Products: Paper trimmer, Die cut machine, Passion Micro Beads,

Instructions:

Create 6 3/4 x 6 3/4” gatefold card using 2 card blanks of the same size. Cut one side in half on both card blanks. The 2 full size halves 6 3/4 x 6 3/4” will be adhered together to create the gatefold.

Butt the 2 half sides together and tape Elegant Moments Timepiece over the join and die-cut. Adhere the 2 6 3/4 x 6 3/4” card blank halves together creating a gatefold with a shaped aperture.

Cover the front gatefold flaps with Moments in Time Paper Collection 3B, inside flaps 8B and 6 3/4 x 6 3/4” panel 3B, edge with distress oxide Victorian Velvet.

Stamp onto white cardstock in versafine onyx and clear heat emboss 2 Elegant Moments Timepiece and Timepiece Sentiment. Colour sentiment with distress oxide Victorian Velvet and Old Paper. Colour Elegant Moments Timepiece with Zig Clean Colour Real Brush Markers and water pen, edge with distress oxide Victorian Velvet and apply Wink of Stella clear to accents. Die-cut smaller Elegant Moments Timepiece with outline and circle die. Adhere clear cardstock behind opening. Adhere sentiment over clock face and add red gel pen to the hearts around the dial. Adhere inside the card through the closed gatefold aperture to line up, add smaller Elegant Moments Timepiece over using dots.

Die-cut white cardstock Scalloped Flourished Gateway, edged in distress oxide Victorian Velvet and die-cut an Elegant Moments Timepiece aperture. Adhere the scalloped gateway inside the card around the elegant Moments Timepiece.

Stamp in Fern Green Leafy Accents onto Deluxe Flower Shaping Paper, colour with Vivid Chartreuse and Leaf Green. Place die-cuts into 3D Leafy Accents Mold, spritz lightly with water and run through the die-cutting machine. When dry add Dries Clear and Crystal Clear.

Stamp onto Deluxe Flower Shaping Paper in Olive Classic Rose leaves, colour with Viridian, die-cut and edge in Olive and colour the back. Stamp Classic Roses onto Deluxe Flower Shaping Paper in Rose Madder, colour in Pink Peony, die-cut edge the tips and colour the back in Pink Peony. Place die-cuts in 3D Rose Shaping Mold, spritz with water and run through the die-cutting machine. Curl 2 smallest petals together to form a bud securing with hot glue, add next size up petal and a further 2 next size up petals forming around the bud securing with hot glue.

Adhere 3 petals together cupping the centres with Deluxe Flower Shaping Kit adhere with hot glue and add Ribbit Prills to the centre.

Cup single petal add hot glue to the centre and Ribbit Prills. Add Dries Clear and Crystal Clear to the roses and leaves.

Hot glue roses and leaves onto the front of the card.

Die-cut Ornamental Tags Moments in Time 12A stamp in Plum ‘Its been a while’ For My Friends Sentiments, edge in distress oxide Victorian Velvet. Hot glue a bow to the front of the tag and adhere with dots.

Other Products: Paper trimmer, scissors, bow, versafine onyx, clear emboss powder, red gel pen, wink of stella clear, distress oxide Old Paper and Victorian Velvet

Instructions:

Make a z-fold card using the kraft card stock. To make the card base, cut Kraft paper measuring 10”  x 7”. Score at 2” and at 4”. Fold mountain and valley style to get a Z fold card base.

Cut pattern paper a little smaller than the card base from the paper collection to cover the two folded panels and cut another piece for the inside of the card. Adhere the pieces on the card, leaving 1/8” border all around.

Cut a square card panel from the pattern paper and trim the frame to make it smaller in size. Remove the center part using the paper trimmer. Add the whole piece on a piece of kraft card paper. Remove the center part of the kraft paper also to create a window.

Stamp the image of the Elegant Moments timepiece stamp set in jet black ink on Deluxe Flower shaping paper. Colour the image using Zig real brush pens and the water brush. Cut with the coordinating die. Stamp the sentiment from the Timepiece Sentiments stamp set with Jet Black ink on Flower shaping paper. Cut with the matching circle from the Circle die set. Adhere the sentiment on the Elegant time piece die cut.

Cut a die cut in white card stock from Elegant Hearts centerpiece die and another die cut from the Luxe Gold paper. Adhere the two pieces together offsetting a little.

Adhere the whole piece on the small square panel. Adhere the timepiece die cut on top. Adhere the whole piece on the front flap of the card front.

Stamp the Roses in Mulberry ink on Deluxe flower shaping paper using the biggest stamp from the Classic Rose stamp set. Colour with the sunflower ink and little mulberry ink with sponge daubers. Stamp the smallest roses using green ink. Die cut using the coordinating dies. Shape the flowers in 3D Rose flower shaping mold and add stamens.

Stamp the leaves from the classic Rose collection using the Green inks, die cut and shape.

Stamp Clematis flower from the Clematis stamp and die set using the same colors, die cut and shape in the 3D Clematis mold. Add adhesive and prills to the flower centers.

Arrange the Rose flowers, clematis flowers and the leaves on the card to finish it.

Other Products: Kraft card stock, paper trimmer, scoring board, die cutting machine.

Instructions:

Create a 5 x 7" card base with white cardstock. Cut a 4.75 x 6.75" piece of designer paper from the Moments in Time Paper Collection, distress with Plum and adhere to card front.

Cut a small frame from the designer paper, distress with Plum, cut a piece of Luxe Gold, slightly larger that frame and adhere together, adhere both to adhesive backed foam and adhere to card front.

Cut the decorative die from the Simply Elegant Centerpiece Die in white card stock and cut off two sections, adhere one to top and one to bottom, as seen in photo.

Stamp clock from the Elegant Moments Timepiece Cling Stamp Set in embossing ink and heat emboss in gold, stamp also in black, cut out with coordinating dies, color gold embossed one with Zig markers. Cut out black center clock piece and cut out outer circle in Luxe Gold Card stock and adhere pieces of clock together. Using the Elegant Moments Timepiece Die, cut out the clock in Gold Luxe, adhere this behind clock, offset to create shadow, as shown.

Stamp the Sweet Magnolia Buds Cling Stamp Set in Rich Cocoa and sponge with Vivid Chartreuse, Vibrant Fuchsia, and Rich Cocoa, cut out with coordinating dies.

Stamp the Sweet Magnolia Cling Stamp Set in Vibrant Fuchsia, cut out with coordinating dies and sponge with Plum in centers and Vibrant Fuchsia on outer petals, sculpt with the 3D Magnolia Shaping Mold and add stamens and glitter.

Stamp the sentiment from the Celebrate Love Sentiments Cling Stamp Set in Black and cut out with the arrow die from the Arrow and Banners Die, distress with Rich Cocoa and Vibrant Fuchsia.

Arrange and adhere branches, flowers and sentiment, as pictured.

Other Products: White cardstock, adhesive backed foam, Bristol Smooth Cardstock, gold embossing powder, embossing ink

Instructions:

My finished card size is 5" x 7". This is a shaped card on a card. Make card base and cover with a piece of green cardstock. Cut a piece of Sheet 2B of the paper collection 1/8" smaller than the green layer and adhere to card front. Using the Elegant Moments Timepiece dies cut a shaped card using white cardstock. Stamp the Clock twice onto Deluxe Flower Shaping Paper. I stamped using Memento Bamboo Leaves ink. Cut out with coordinating dies and color with Bamboo Leaves and Cactus Flower. I did the edges using the stack and store daubers. I then took cotton balls and lightly applied color to the rest of the clock. At this point I decided on the placement of the magnets and attached them so the clock card will stay closed. Glue the clock base to the card front and we can get started decorating.

The different layers of the clock were attached using dimensional tape to give the clock more interest. Using coordinating die cut a piece of Sheet #4A of the paper collection and glue to the inside of the clock. Cut out one of the sentiments found on Sheet 4B of the paper collection. I backed it with a couple of pieces of white cardstock and adhered using dimensional tape.

Stamp the Sweet Magnolia flowers onto Deluxe Flower Shaping Paper using Cactus Flower ink and stamp the leaves using Bamboo Leaves ink. Cut out with coordinating dies and color using Stack and Store Daubers. Lay flower petals and leaves onto the mold, spritz with water and run through the die cut machine. Turn out onto the desk to dry. Once dry I used a brush to apply the Glossy Accents to the leaves and the flower petals. I sprinkled glitter over the flower petals and allowed everything to dry. Add a puddle of glue to the centers of the flowers and add Prills. Allow to dry. When dry, decide on placement and hot glue to card front being careful to allow the clock shaped card to open.

Now we will work on the inside of the 5" X 7" card. Cut a piece of sheet 4A of the paper collection and glue down. I chose a sentiment from Sheet 4B of the paper collection. Adhere it to the inside of the card using dimensional tape. The card is finished.

Other Products: Die Cut Machine, White Cardstock, Green Cardstock, Cotton Balls, Dimensional Tape, Hot Glue Gun, Magnets, Ranger Glossy Accents, Craft Brush

Instructions:

Prepare a white card base 5 x 7”. Cut a piece of Black card stock 1/8” smaller all the way around and adhere to the card. Cut 2 pieces of the Moments in Time paper 1 1/2” x 4 7/8”, adhere to the card at the right top and left bottom. Cut 2 pieces 1 1/2 x 3 1/4” and adhere to the left top corner and one to the right lower corner as shown. Cut one piece 3 1/4 x 1 5/8” and adhere to the center of the card. Cut 2 of the sentiment tags from sheet #4B, add foam dots to the back and adhere one to the top and one to the bottom as shown.

Stamp the leaves form the Large Floral Urn on white with the cottage Ivy, color in with the New Sprout and cut out with the coordinating die. Ink the edges with the Bamboo Leaves, use the Flower Shaping tool to shape and adhere to the center of the card.

Stamp the Small Sweet Peony flowers on white with the Majestic Violet ink, color in with the New Sprout, cut out with the coordinating die, ink the edges with more of the Majestic Violet, use the Flower shaping tool to shape and adhere on top of the leaves.

To finish the card add glitter to all the leaves and flowers. Add small white pearls to the center of each flower and 3 above the top sentiment tag and 3 below the bottom tag.

Other Products: Paper Trimmer, Die cut machine, Small white pearls,

Instructions:

Cut a piece of white cardstock 5.5 x 11", score at 5.5" and fold to get a square base. Cut a piece of paper from Moments in Time Paper Collection to 5 5/16 x 5 5/16". Cut another piece of paper from Moments in Time Paper Collection to 4 3/4 x 4 3/4" and a little bigger piece of the white cardstock. Adhere them to the base. Cut out a white and a gold doily with the 4th die from the Simply Classic Rectangle Frame Die set. Adhere them to the base.

Stamp the clock from the Elegant Moments Timepiece Cling Stamp Set in Toffee Crunch ink, repeat it 3 times. Color with promarkers and cut out separate parts with coordinating dies. Stamp the clock hands in Toffee Crunch ink, cut out with coordinating die and repeat it with the gold cardstock. Cut out the clock outline frame and the narrow rim from the gold cardstock. Make the shaker box on the clock face with the adhesive tape and piece of acetate, put inside some Tu-Tu Pink prills. Adhere all pieces together and to the base with adhesive tape as pictured.

Stamp blossoms from Small Wild Rose Stamp Set in Magenta Hue ink onto Deluxe Flower Shaping paper, smaller flowers color with Magenta Hue ink, diecut with coordinating dies and shape with coordinating mold. For each bigger flower you'll need 2 layers, for smallest flowers you'll need 1 layer. Add some Assorted Bead Stamens to their centers. Stamp 6 flowers from Cottage Garden Hydrangea Cling Stamp Set onto Deluxe Flower Shaping paper in Leaf Green ink, cut out with coordinating die and shape with the Deluxe Flower Shaping Tools. Add some Tu-Tu Pink prills to their centers. Stamp 3 branches from Cottage Tree 'scapes Cling Stamp Set in Leaf Green ink, color them and cut out with coordinating die.

Use dimensional adhesive and hot glue to attach all elements onto card as pictured. To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers and the clock.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, gauze , self-adhesive pearls, promarkers

Instructions:

The patterned paper with the floral clock cluster in the top left hand corner is the background. Cut a strip of the dark green patterned paper that is 1.75 x 12" and adhere it across the middle of the layout. Cut a piece of the light green patterned paper that is 1 x 10" with the ends torn. Adhere this just above the dark green patterned strip. Double mat the 4 x 6" photo in white cardstock and then a larger mat of burgundy patterned paper. Adhere these layers together using foam tape and regular adhesive. Adhere to the left hand side of the layout. Find and die cut out the 2 tags used. Add a burlap string bow to each tag and add above the matted photo.

Find and fussy cut out the title block, as well as the “A” from the same block but in green. Add the “A” using a foam dot. Then add the title block to the right hand side of the matted photo.

Stamp 1 of the alarm clock using an embossing pad and white embossing powder onto white cardstock and heat set. Die cut out using the coordinating die. Add light colour to the clock using Zig Clean Color Markers and a waterbrush (Mid Grey, Light Carmine, Pale Pink, Light Violet). Add the clock to the bottom right of the matted photo.

Stamp and die cut 1 set of each size of wild rose in both ink colors (Stampin Up- Berry Burst, Archival- Rose Madder) onto Deluxe Flower Shaping Paper. Add color to the lighter flowers using the same ink as they were stamped (Archival- Rose Madder) and daubers. Add color to the darker flowers using light purple ink (Stampin Up- Pale Plum) and daubers. Shape the flowers using the coordinating 3D shaping mold. Assemble the flowers, and then add beads to the middle of each using a liquid adhesive. Stamp 2 sets of the Leafy Accents leaves using dark green ink (Stampin Up- Handsome Hunter) onto Deluxe Flower Shaping Paper. Add color to the leaves using a lighter green (Stampin Up- Mint Macaron) and daubers. Shape the leaves using the coordinating 3D shaping mold. Add the flowers around the matted photo and clock. Then add pieces of the leaves around the flowers.

Other Products: Embossing Pad, White Embossing Powder, Cardstock- White, Waterbrush, Beads, Burlap String, Stampin Up Ink (Pale Plum, Berry Burst, Handsome Hunter, Mint Macaron), Scrapbook Adhesives by 3L (Adhesive Dots Medium, E-Z Runner Ultra, Dual Tip Glue Pen, Crafty Foam Tape)

Instructions:

Cut a card base from Elegant Moments Timepiece Die HCD1-7379. At the back of a card add HCD2-7309 Elaborate Oval Frames Die on white cardstock adhere it using Designer Dries Clear Adhesive.

Take pattern paper from the HCDP1-2134 Moments in Time Paper Collection and stamp from HCPC-3971 Elegant Moments Timepiece Cling Stamp using archival ink-cactus flower, library green, plum. Cut it with coordinating die and adhere it on card base using Designer Dries Clear Adhesive.

From the same stamp set, stamp again on white cardstock using archival ink-cactus flower, cut it with coordinating die and distress the edges using same ink. Adhere it using foam tape. Randomly add crystal clear glitter. Create a dial using same stamp and die and add crystal laquer, as pictured.

Other Products: Big-Shot Plus machine, White Card-stock.

Instructions:

The finished card measures 7 x 6 inches. Cut a piece of white deluxe flower shaping paper 7 x 12" inches and score at 6 inches to make a side fold card. Cut one piece of paper #12B:  6 x 7 inches, one piece of paper 11B: 5 3/4 x 6 3/4 inches, one piece of white cardstock:  5 1/2 x 6 1/2 inches, another in white cardstock 5 1/4 x 6 1/4 inches and a last one in paper #7B: 5 x 6 inches. Glue them to your card base.

Stamp one time in olive ink and one time in plum ink a clock from the Simple moments time pieces. Die cut with the circle in the die kit. Color it with the same ink color and with stampin’write pen color rich razzle berry and mossy meadow. Glue it with 3D foam on the card base. 

Stamp your Wild rose flowers with Plum ink onto white flower shaping paper. Color the inside of the flower with the New sprout ink. Ink the edge with the plum ink.  Diecut with the coordinating die. Place facedown into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe flower shaping kit tools. Glue 2 layers together. In the center of the flowers add stamens. (Color some of the white stamens with the plum ink).  Make 1 medium, 2 small in plum and 3 small in new sprout color. Add glue to your flowers and spread Crystal clear powder on the flowers. Make leaves with the same technique with the leafy accents collection and the olive ink.

Put cheesecloth at the left of the clock. Arrange your flowers and leaves over it.  Add ribbon. Cut a sentiment in the paper and glue it at the right of the card with 2 flowers.

Other Products: Water mister, hot glue gun, hot glue, scissors, cheesecloth, ribbon, stampin’write rich razzle berry and merry meadow

Instructions:

Card size is 3 3/4” x 6”. Score 11 x 4 1/4” white cardstock at 5 1/2” on the long side. Using the largest Elegant Moments Timepiece Die, place about 1/2” over the fold and diecut to create a shaped card base. Using the same die, cut a full clock from white cardstock and adhere to the card front. Cut again from Luxe Gold cardstock, trim the top, stamp the ‘good things take time’ sentiment using VersaMark ink, cover with Ranger Fine Detail Black Embossing Powder and heat set using the Heat It tool. Adhere to the inside of the card.

Stamp the Elegant Moments Timepiece Clock on Luxe Silver Cardstock 2x and on Luxe Gold Cardstock 1x using VersaMark ink, cover with WOW Metallic Gold Sparkle Embossing Glitter and heat set using the Heat It Tool. Diecut the full silver clock and adhere it to the card front. Using the middle die and the hands die, cut from the Luxe Gold stamped image. Cut the hands two more times from white cardstock and cut the center die four more times from white cardstock, ink the edges of all of the white diecuts using metallic gold ink. Adhere the center section layers together using dries clear adhesive and adhere to the card front. Using the circle die from the same set, cut the clock from the second Luxe Silver image and four more times from white cardstock. Ink the edges of the white diecuts using metallic gold ink and adhere behind the stamped image. Adhere this to the card base. Adhere the hands diecuts together and adhere to the clock.

Stamp the Small Wild Rose on champagne metallic cardstock using VersaMark, cover with Aged Ivory embossing powder and heat set using the Heat It Tool. Diecut using the coordinating die. Color front and back using Light House ink. Shape stamped side down in the 3D Small Wild Rose Mold. Use two layers to create the flower, pierce the centers using the Groove Golf Tool and insert the stamen. Secure with hot glue.

Stamp the Leafy Accents leaves on Deluxe Flower Shaping Paper using Archival Olive ink. Color using Vivid Chartreuse and Olive inks. Diecut using the coordinating die, add Olive ink to the edges and shape in the Leafy Accents Mold.

Sponge the flower and leaves with dries clear adhesive and sprinkle with Rajni Chawla’s Crystal Clear glitter. Adhere the flower and leaves to the clock as shown using hot glue.

Other Products: White Cardstock, Champagne Cream Metallic Cardstock, VersaMark, WOW Metallic Gold Sparkle Embossing Glitter, Ranger Fine Detail Black Embossing Powder, Hot Glue Gun, Misti, Funnel Tray

Instructions:

Cut white cardstock slightly bigger than 8 x 4”, lay in Scor-Pal landscape and score at halfway. Over-hang the top of 4 x 4” circle die from Courtyard Elegance Die and run through the die-cutting machine to create the card blank.

Die-cut Moments in Time Paper Collection 3B with the 4 x 4” Courtyard Elegance Die and trim to fit inside the card edged in Victorian Velvet.

Stamp onto white cardstock Timepiece Sentiment in versafine onyx and clear heat emboss, die-cut and colour with distress oxide Victorian Velvet and Old Paper. Mat onto Moments in Time Paper Collection 9B die-cut with Decorative Circle Frames edged in Victorian Velvet.

Stamp in Jet Black Stazon onto Luxe Gold Cardstock 2x and 1x gold heat embossed Simple Moments Timepiece and 1x Luxe Silver cardstock and 2x versafine onyx clear heat embossed onto white cardstock plus clock hands. Die-cut all the layers using Simple Moments Timepiece and the circles in the die set.

Colour the white cardstock swirl design and clock hands with Zig Clean Color Real Brush Markers. Colour the clock face with Victorian Velvet and Old Paper, edge in Victorian Velvet.

Die-cut clear cardstock circle for clock face and adhere gold trim with gold heat embossing. Die-cut Luxe Gold Cardstock Window Hinges and score at the centre. Adhere half to the front clear cardstock circle and the other behind the clock face.

Adhere Simple Moments Timepiece in plain white cardstock and adhere to the Luxe Gold Cardstock to add stability to the feet and attach to the circle card blank. Stack all other layers onto dots including the hands.

Stamp onto Deluxe Flower Shaping Paper in Rose Madder Classic Rose and colour with Pink Peony front and back. Stamp the leaves onto Deluxe Flower Shaping Paper in Olive and colour with Viridian front and back. Die-cut and run through the die-cutting machine in 3D Rose Shaping Mold.

Shape the 2 smaller petals and cup into a bud with Deluxe Flower Shaping Kit, adhere offset larger petals around using hot glue. Use single petals threaded with Assorted Bead Stamen, secure with hot glue and trim off wire. Hot glue the large rose to the leaves and to the Simple Moments Timepiece.

Add Dries Clear to the leaves and roses and sprinkle Dries Clear.

Other Products: Paper trimmer, scissors, hot glue, versafine onyx, clear heat embossing powder

Instructions:

Card size: 3 5/8” x 6”. Make a shaped card using heavy weight white cardstock, with the outer edge die of the Elegant Moments Die, over-hanging the side folded edge by about 1/8 inch. Make another full card front with the same die then glue it to the front of folded card. Cut a piece of aqua colored decorative paper with the outer die, cut off about 1/8” from left side then glue it to the inside of the card.

Stamp, using Tuxedo Black, the Elegant Moments Timepiece x2, onto white cardstock, die cut 1 with outer die and the other with the inner die then color the outer section of full timepiece and the inner section of the other timepiece. Also stamp Sentiment using black, die cut with the 2 inner circle dies that fit. Cut 2 pieces of foam, 1 for the inner timepiece die cut and 1 for the smallest sentiment circle. Glue sections together popping up sections with foam.

Stamp smallest Classic Roses onto Deluxe Flower Shaping Cardstock using Deep Purple, sponge with the same, die cut sponge the backs then shape in the mold. Make most into small buds using 2 smallest petals together, make 2-3 larger buds and 1 small bloomed rose. It is easiest to form around something so use a medium beaded stamen with wire for this then glitter the flowers. Add a sepal at the bottom with a small punch or die cut flower that has pointed ends, wet punched pieces then squeeze ends to make them more pointed.

Stamp leaves with aqua colored dye ink, sponge with aqua and purple, die cut then form in shaping mold. Cut leaves apart in groups no larger than 3.

Start forming arrangement at the bottom left using leaves then add flowers on top of the leaves. Paint the leaves with a combination of Shimmer Additive and 3D Lacquer.

Glitter the card front.

Other Products: White cardstock, Turquoise or Aqua color ink Pad, Shimmer additive, Copic Markers: BV11, BV32, BV15, BV000, BV00, BV01, BV02, small pointy flower punch for Sepals, foam sheet (Fun Foam type).

Instructions:

It is a ready folding card measuring 9 1/2 by 6 inches. Cut a panel on grey cardstock measuring 9 1/4 by 5 3/4 inches and adhere on to the card base using dimensional tape, cut a panel on Deluxe paper measuring 8 7/8 by 5 3/8 inches and color the panel front with French Ultra Marine Ink using ink brush, then color the panel edges with Seafarer Ink, then apply Night sky ink on the edges and last apply jet black ink on the panel edges. Stamp the 'Precious Time' stamp on the panel using black ink from Timepiece Sentiments Cling Stamp Set. Apply texture paste on the panel using pallet knife and stencil, let it dry and adhere this panel on the card base using clear glue.

Stamp the different images from Timepiece Sentiments Cling Stamp Set on Brown, Light Brown and white cardstock using versamark embossing ink and cover images with golden, liquid platinum and black embossing powder and heat it using heat tool. Die cut using coordinating die. Heat emboss the clock arms with black embossing powder and diecut using coordinating die.

Stamp the clock image from Simple Moments Timepiece Stamp Set on brown cardstock with versamark embossing ink 2x and cover one image with Liquid Platinum Embossing powder and second image with golden embossing powder, heat it using heat tool, die cut using big circle die from Simple Moments Timepiece Die Set and die cut center clock part of golden clock from using 4th circle die from the same die set. Make a hole for brads in the center of small circle clock using golf groove tool and make a hole on the big clock as shown and add brads, add clock arms on the small clock and close by adding brads.

Color the edges of all diecuts with Vintage photo distress ink. 

Add foam dots from the back side of small clock and adhere on to the big clock.

Paint the mollds and wooden embellishments with Vintage photo distress ink.

Arrange all ready elements using dimensional tape and hot glue gun and embellish the card by applying clear glue randomly and sprinkle mini prills and white acrylic paint.

Other Products: Die Cutting Machine, Brown Cardstock, grey cardstock, Light Brown Cardstock, Versamark Embossing Ink, Metal Charms, Golden Embossing Powder, Black Embossing Powder, Ranger Liquid Platinum Embossing Powder, Vintage Photo Distress Ink, Ink Blender Brushes, Wooden embellishments, stencil, art pebbles, Molds, Brats, Brush, White Paint, Dimensional Tape, Hot Glue Gun, palette knife.

Instructions:

Cut two full clock frames from the white paper using the Simple Moments Timepiece Die set. In a first frame, cut a hole with a circular die from the set. Cut two full frames of the clock from silver paper. In the middle of the first one cut the hole with a circular die. Stamp the round clock in black ink onto the paper from the Moments in Time Paper Collection and cut it out with the matching die. Glue the frames together:

Glue together the back of the clock - take the stamped clock and adhere it with the Double Dots to the white cutout and the silver one. For the front of the clock take the second frame with the hole, glue the white and silver frame together so that the silver is at the front. Use scissors to cut the top of the clock and adhere it on top of the first frame as pictured.

From the white paper and the paper collection, cut a strip to 12 1/4" x 2" long, glue its short edges together to make a circle. Cut another paper strip to 12 1/4" x 1 7/8".

Adhere the frames and the paper circle together with hot glue. Apply hot glue to the edges of the circle and press it quickly. Make sure that the elements fit together quite evenly. Then, paste inside the previously cut strip from the collection of paper and adhere the front frame, make sure that the clock legs are equal, so that the clock can stand straight.

Stamp classic rose flowers on deluxe flower shaping paper using Memento Lady Bug ink and cut with coordinating die. Stamp leaves using black ink and cut with coordinating die. Paint flowers yellow and pink ink and leaves with red and green ink and shape using flower and leaves shaping mold. Layer flowers and create 3D rose.

Arrange everything as pictured, cover with glue and glitter. Add pink prills to the leaves.

Other Products: Hot glue, cutting machine